From ca668a3bc9533dc9987f6c0dd99f8769eccf05bc Mon Sep 17 00:00:00 2001 From: packerlschupfer <83344883+packerlschupfer@users.noreply.github.com> Date: Thu, 17 Sep 2026 06:01:49 +0200 Subject: [PATCH 1/8] =?UTF-8?q?CLI:=20--inspect-paint=20=E2=80=94=20dump?= =?UTF-8?q?=20per-facet=20paint=20state=20as=20JSON=20(#14608)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit * CLI: --inspect-paint — dump per-facet paint state as JSON Reads the per-facet enforcer/blocker/extruder/fuzzy-skin state stored on every ModelVolume (supported_facets / seam_facets / mmu_segmentation_facets / fuzzy_skin_facets) and emits a structured JSON summary to stdout. Machine-readable alternative to opening the paint gizmos. Per (object, volume, layer, state): facet count, surface area in mm², and mesh-local bounding box. Empty layers collapse to {"empty": true}. Summary at the top level rolls up totals. One correctness detail worth calling out: FacetsAnnotation:: get_facets_strict returns an indexed_triangle_set whose `vertices` array is the whole source mesh — only `indices` are filtered to the painted triangles. A naive bounding_box(its) would report the whole mesh's bbox even when only a few facets are painted. The helper its_referenced_bbox() walks only the vertices actually indexed by the painted triangles, so `bbox` correctly localizes the painted region. Rationale: every paint-driven workflow — GUI-painted .3mf verified in CI, AI agents planning support enforcers, MMU color layout checks — needs to know what's already painted on a model. Today that's a GUI-only read. --inspect-paint closes that loop for scripted callers. New file src/slic3r/Utils/PaintCLI.{hpp,cpp} (~215 lines). Depends only on Model, TriangleMesh, TriangleSelector, FacetsAnnotation, and nlohmann::json — all already in tree. No new dependencies, no signature changes, no behavior change when the flag is absent. Registered as an action (parallel to --info) so it satisfies the "needs an action" check and bypasses the GUI fallback; control falls through the normal post-action path to a clean exit 0. Verification: unpainted STL: every layer {"empty": true}, summary zero GUI-painted .3mf: enforcer count / area / bbox match painter clean JSON: parseable via jq * CLI --inspect-paint: exit after printing, reject conflicting actions - Finish like the end of CLI::run once the JSON is written, as the tooltip says. The callback manager is Linux-only, so its use is guarded. - Reject actions that would otherwise be skipped without notice (--slice, --export-3mf, ...) before loading. Load-time options such as --uptodate are still accepted. - Replace invalid UTF-8 in object names and paths instead of throwing. - Report every input file as sources; inputs are merged into one model before actions run. * CLI --inspect-paint: reject a run without input Without an input file or --load-assemble-list there is nothing to inspect, and the run printed nothing and exited 0. Reject it up front with CLI_INVALID_PARAMS, next to the other invalid-parameter checks. --- src/OrcaSlicer.cpp | 48 ++++++++ src/libslic3r/PrintConfig.cpp | 13 +++ src/slic3r/CMakeLists.txt | 2 + src/slic3r/Utils/PaintCLI.cpp | 204 ++++++++++++++++++++++++++++++++++ src/slic3r/Utils/PaintCLI.hpp | 31 ++++++ 5 files changed, 298 insertions(+) create mode 100644 src/slic3r/Utils/PaintCLI.cpp create mode 100644 src/slic3r/Utils/PaintCLI.hpp diff --git a/src/OrcaSlicer.cpp b/src/OrcaSlicer.cpp index 29c81caa41..0c9bd0b1ee 100644 --- a/src/OrcaSlicer.cpp +++ b/src/OrcaSlicer.cpp @@ -87,6 +87,7 @@ using namespace nlohmann; #include "dev-utils/BaseException.h" #endif #include "slic3r/Utils/MeshInspect.hpp" +#include "slic3r/Utils/PaintCLI.hpp" #include "slic3r/GUI/PartPlate.hpp" #include "slic3r/GUI/BitmapCache.hpp" #include "slic3r/GUI/OpenGLManager.hpp" @@ -1443,6 +1444,29 @@ int CLI::run(int argc, char **argv) } } + // --inspect-paint prints its JSON and exits, so any action that does work of its + // own (slicing, exporting) would be skipped without notice. Reject those up front; + // only options that merely tune how the input is loaded may come along. + if (std::find(m_actions.begin(), m_actions.end(), "inspect_paint") != m_actions.end()) { + static const std::set inspect_compatible = { "inspect_paint", "uptodate", "load_defaultfila", "min_save", + "mtcpp", "mstpp", "no_check", "normative_check", "pipe" }; + for (const std::string &action : m_actions) { + if (inspect_compatible.count(action) == 0) { + std::string flag = action; + std::replace(flag.begin(), flag.end(), '_', '-'); + boost::nowide::cerr << "--inspect-paint cannot be combined with --" << flag << std::endl; + record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info); + flush_and_exit(CLI_INVALID_PARAMS); + } + } + // Without input there is nothing to inspect; fail rather than print nothing and exit 0. + if (m_input_files.empty() && m_config.opt_string("load_assemble_list").empty()) { + boost::nowide::cerr << "--inspect-paint needs an input file or --load-assemble-list" << std::endl; + record_exit_reson(outfile_dir, CLI_INVALID_PARAMS, 0, cli_errors[CLI_INVALID_PARAMS], sliced_info); + flush_and_exit(CLI_INVALID_PARAMS); + } + } + // --export-settings - writes its JSON to stdout, so reject every action or transform that may write there // too (--info, --help, --orient, slicing and exporting). The allowed ones do nothing when nothing is // sliced or exported. @@ -6100,6 +6124,30 @@ int CLI::run(int argc, char **argv) cli_status_callback(slicing_status); } g_cli_callback_mgr.stop(); +#endif + for (Model &m : m_models) + m.remove_backup_path_if_exist(); + record_exit_reson(outfile_dir, CLI_SUCCESS, plate_to_slice, cli_errors[CLI_SUCCESS], sliced_info); + boost::nowide::cerr.flush(); + return CLI_SUCCESS; + } else if (opt_key == "inspect_paint") { + // --inspect-paint — read the per-facet enforcer/blocker/extruder/ + // fuzzy state from the loaded model and emit a JSON summary. + // Machine-readable alternative to opening the paint gizmos. + for (Model &model : m_models) { + model.add_default_instances(); + Slic3r::PaintCLI::inspect_to_json(model, m_input_files, boost::nowide::cout); + } + boost::nowide::cout.flush(); + // The tooltip promises "then exit"; conflicting actions were rejected before + // loading. Finish like the end of run(). flush_and_exit() is not usable here: + // it prints "found error ..." to stdout, which would corrupt the JSON. +#if defined(__linux__) || defined(__LINUX__) + if (g_cli_callback_mgr.is_started()) { + PrintBase::SlicingStatus slicing_status{100, "All done, Success"}; + cli_status_callback(slicing_status); + } + g_cli_callback_mgr.stop(); #endif for (Model &m : m_models) m.remove_backup_path_if_exist(); diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 65f43b3ee5..74d332ca01 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -11991,6 +11991,19 @@ CLIActionsConfigDef::CLIActionsConfigDef() "the --ground-* options choose from. Machine-readable alternative to --info."); def->set_default_value(new ConfigOptionBool(false)); + // --inspect-paint \u2014 dump the per-facet enforcer/blocker/extruder/fuzzy + // paint state stored on the loaded model (supports, seam, MMU color, + // fuzzy-skin) as JSON. Read-only; lets CI / scripted / AI tooling + // reason about existing paint on a .3mf without loading the GUI. + def = this->add("inspect_paint", coBool); + def->label = L("Inspect paint (JSON to stdout)"); + def->tooltip = L("Print a structured JSON summary of every painted layer " + "(supports, seam, MMU color, fuzzy-skin) already stored on " + "the loaded model \u2014 per-state facet count, surface area, " + "and mesh-local bounding box \u2014 then exit. Machine-readable " + "alternative to opening the paint gizmos in the GUI."); + def->set_default_value(new ConfigOptionBool(false)); + def = this->add("export_settings", coString); def->label = L("Export Settings"); def->tooltip = L("This exports settings to a file. Use - to write them to stdout."); diff --git a/src/slic3r/CMakeLists.txt b/src/slic3r/CMakeLists.txt index ca26b80da2..656d41f338 100644 --- a/src/slic3r/CMakeLists.txt +++ b/src/slic3r/CMakeLists.txt @@ -682,6 +682,8 @@ set(SLIC3R_GUI_SOURCES Utils/Bonjour.hpp Utils/MeshInspect.cpp Utils/MeshInspect.hpp + Utils/PaintCLI.cpp + Utils/PaintCLI.hpp Utils/CalibUtils.cpp Utils/CalibUtils.hpp Utils/ColorSpaceConvert.cpp diff --git a/src/slic3r/Utils/PaintCLI.cpp b/src/slic3r/Utils/PaintCLI.cpp new file mode 100644 index 0000000000..d99dc0b450 --- /dev/null +++ b/src/slic3r/Utils/PaintCLI.cpp @@ -0,0 +1,204 @@ +// PaintCLI.cpp — CLI paint-inspection primitives. See PaintCLI.hpp. +#include "PaintCLI.hpp" + +#include "libslic3r/Model.hpp" +#include "libslic3r/TriangleMesh.hpp" +#include "libslic3r/TriangleSelector.hpp" + +#include + +#include +#include +#include +#include + +namespace Slic3r { +namespace PaintCLI { + +namespace { + +using json = nlohmann::json; + +double its_surface_area(const indexed_triangle_set &its) +{ + double total = 0.0; + for (const stl_triangle_vertex_indices &t : its.indices) { + const Vec3f &a = its.vertices[t(0)]; + const Vec3f &b = its.vertices[t(1)]; + const Vec3f &c = its.vertices[t(2)]; + total += 0.5 * (b - a).cross(c - a).norm(); + } + return total; +} + +// Bbox over triangle-referenced vertices only. get_facets_strict() returns +// an itset with the full source vertex list — using bounding_box() on it +// would report the whole mesh's bbox even when only a few facets are painted. +BoundingBoxf3 its_referenced_bbox(const indexed_triangle_set &its) +{ + BoundingBoxf3 bb; + bool first = true; + for (const stl_triangle_vertex_indices &t : its.indices) { + for (int k = 0; k < 3; ++k) { + const Vec3d v = its.vertices[t(k)].cast(); + if (first) { bb.min = bb.max = v; first = false; } + else bb.merge(v); + } + } + return bb; +} + +json vec3_to_json(const Vec3d &v) +{ + return json::array({ v.x(), v.y(), v.z() }); +} + +json bbox_to_json(const BoundingBoxf3 &bb) +{ + return { + { "min", vec3_to_json(bb.min) }, + { "max", vec3_to_json(bb.max) }, + { "size", vec3_to_json(Vec3d(bb.max - bb.min)) }, + }; +} + +// One (layer, state) row — empty ones are omitted at the caller level. +json state_entry(const std::string &label, const indexed_triangle_set &its) +{ + return { + { "state", label }, + { "facets", its.indices.size() }, + { "area_mm2", its_surface_area(its) }, + { "bbox", bbox_to_json(its_referenced_bbox(its)) }, + }; +} + +// Iterate the states relevant to one FacetsAnnotation kind, collecting +// non-empty entries. Empty layer → {"empty": true}. `n_facets_out` is the +// running total of painted facets — bumped for the summary. +json inspect_layer(const ModelVolume &mv, const FacetsAnnotation &fa, + const std::vector> &states, + size_t &n_facets_out) +{ + if (fa.empty()) + return { { "empty", true } }; + + json entries = json::array(); + for (const auto &st : states) { + if (!fa.has_facets(mv, st.first)) + continue; + indexed_triangle_set its = fa.get_facets_strict(mv, st.first); + if (its.indices.empty()) + continue; + n_facets_out += its.indices.size(); + entries.push_back(state_entry(st.second, its)); + } + return { + { "empty", entries.empty() }, + { "states", std::move(entries) }, + }; +} + +const std::vector> &supports_states() +{ + static const std::vector> s = { + { EnforcerBlockerType::ENFORCER, "ENFORCER" }, + { EnforcerBlockerType::BLOCKER, "BLOCKER" }, + }; + return s; +} + +const std::vector> &fuzzy_states() +{ + // FUZZY_SKIN is an enum alias for ENFORCER; the layer is single-state. + static const std::vector> s = { + { EnforcerBlockerType::FUZZY_SKIN, "FUZZY_SKIN" }, + }; + return s; +} + +const std::vector> &mmu_states() +{ + static std::vector> s = []{ + std::vector> v; + for (int i = 1; i <= int(EnforcerBlockerType::ExtruderMax); ++i) + v.emplace_back(EnforcerBlockerType(i), "extruder_" + std::to_string(i)); + return v; + }(); + return s; +} + +} // namespace + +void inspect_to_json(const Model &model, const std::vector &source_paths, + std::ostream &out) +{ + json root; + root["sources"] = source_paths; + root["frame"] = "mesh_local"; + root["note"] = "Coordinates are mesh-local (each volume's own frame). " + "Paint gizmos operate in this frame."; + + json objects = json::array(); + size_t total_objects = 0, total_volumes = 0, total_painted = 0, total_facets = 0; + + for (size_t oi = 0; oi < model.objects.size(); ++oi) { + const ModelObject *mo = model.objects[oi]; + if (!mo) continue; + ++total_objects; + + json obj; + obj["index"] = oi; + obj["name"] = mo->name; + + json volumes = json::array(); + for (size_t vi = 0; vi < mo->volumes.size(); ++vi) { + const ModelVolume *mv = mo->volumes[vi]; + if (!mv) continue; + ++total_volumes; + + const indexed_triangle_set &its = mv->mesh().its; + json vol; + vol["index"] = vi; + vol["name"] = mv->name; + vol["n_facets"] = its.indices.size(); + vol["is_model_part"] = mv->is_model_part(); + vol["bbox_mesh_local"] = bbox_to_json(bounding_box(its)); + + size_t vol_painted = 0; + json paints; + paints["supports"] = inspect_layer(*mv, mv->supported_facets, + supports_states(), vol_painted); + paints["seam"] = inspect_layer(*mv, mv->seam_facets, + supports_states(), vol_painted); + paints["mmu_segmentation"] = inspect_layer(*mv, mv->mmu_segmentation_facets, + mmu_states(), vol_painted); + paints["fuzzy_skin"] = inspect_layer(*mv, mv->fuzzy_skin_facets, + fuzzy_states(), vol_painted); + vol["paints"] = std::move(paints); + vol["painted_facets_total"] = vol_painted; + + if (vol_painted > 0) ++total_painted; + total_facets += vol_painted; + + volumes.push_back(std::move(vol)); + } + obj["volumes"] = std::move(volumes); + objects.push_back(std::move(obj)); + } + root["objects"] = std::move(objects); + root["summary"] = { + { "objects", total_objects }, + { "volumes", total_volumes }, + { "volumes_with_paint", total_painted }, + { "painted_facets_total", total_facets }, + }; + + // Object names and file paths are arbitrary bytes, and dump() throws on invalid + // UTF-8 by default. Replace such sequences with U+FFFD so the output is always + // valid JSON rather than an exception out of the CLI. + out << root.dump(2, ' ', false, json::error_handler_t::replace) << std::endl; +} + +} // namespace PaintCLI +} // namespace Slic3r diff --git a/src/slic3r/Utils/PaintCLI.hpp b/src/slic3r/Utils/PaintCLI.hpp new file mode 100644 index 0000000000..8e31750b37 --- /dev/null +++ b/src/slic3r/Utils/PaintCLI.hpp @@ -0,0 +1,31 @@ +// PaintCLI.hpp — CLI paint-inspection primitives. +// +// Backs the --inspect-paint CLI action. Reads the per-facet enforcer / +// blocker / extruder / fuzzy-skin state that OrcaSlicer stores on every +// ModelVolume (supports, seam, MMU color, fuzzy-skin) and emits a +// structured JSON summary — facet count, surface area, and mesh-local +// bounding box per state — so CI / scripted / AI tooling can reason +// about existing paint on a .3mf without opening the GUI. +// +// Coordinates are mesh-local (each volume's own frame), matching the +// frame that the paint gizmos operate in. +#ifndef slic3r_PaintCLI_hpp_ +#define slic3r_PaintCLI_hpp_ + +#include +#include +#include + +namespace Slic3r { +class Model; + +namespace PaintCLI { + +// `source_paths` lists every input file; the CLI merges them into one Model. +void inspect_to_json(const Model &model, const std::vector &source_paths, + std::ostream &out); + +} // namespace PaintCLI +} // namespace Slic3r + +#endif From 82e91bd4727baac9fef996aa7e778fd0d6178b3c Mon Sep 17 00:00:00 2001 From: Ian Bassi Date: Thu, 17 Sep 2026 09:08:50 -0300 Subject: [PATCH 2/8] Port wipe tower BBS improvements (#15485) --- src/libslic3r/GCode.cpp | 59 ++-- src/libslic3r/GCode.hpp | 12 +- src/libslic3r/GCode/WipeTower.cpp | 38 ++- src/libslic3r/GCode/WipeTower.hpp | 20 +- src/libslic3r/GCode/WipeTower2.cpp | 14 +- src/libslic3r/GCode/WipeTower2.hpp | 2 +- src/libslic3r/Preset.cpp | 2 +- src/libslic3r/Print.cpp | 387 ++++++++++++++++++++++++++ src/libslic3r/Print.hpp | 87 ++++++ src/libslic3r/PrintConfig.cpp | 16 +- src/libslic3r/PrintConfig.hpp | 1 + src/slic3r/GUI/ConfigManipulation.cpp | 6 +- src/slic3r/GUI/GLCanvas3D.cpp | 106 ++++++- src/slic3r/GUI/GLCanvas3D.hpp | 2 + src/slic3r/GUI/PartPlate.cpp | 8 +- src/slic3r/GUI/Tab.cpp | 32 +++ tests/libslic3r/test_wipe_tower.cpp | 196 +++++++++++++ 17 files changed, 945 insertions(+), 43 deletions(-) diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index 501b5d0264..01457d9344 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -1028,11 +1028,21 @@ static std::vector get_path_of_change_filament(const Print& print) double current_z = gcodegen.writer().get_position().z(); if (z == -1.) // in case no specific z was provided, print at current_z pos z = current_z; - if (!is_approx(z, current_z)) { + // Orca: wipe_tower_no_sparse_layers crash guard. With sparse layers skipped the tower is + // compacted far below the object, so descending to it is only safe once the nozzle is parked + // over the tower - which is what the is_finish_first travel above does. Otherwise the nozzle + // is still over the model and this descent would drive it into the print, so defer it to the + // re-descents below, which run after the travel to the tower. + const bool defer_compacted_descend = m_sparse_layers_skipped + && !tcr.priming && !tcr.is_finish_first && (current_z - z) > EPSILON; + if (!is_approx(z, current_z) && !defer_compacted_descend) { gcode += gcodegen.writer().retract(); gcode += gcodegen.writer().travel_to_z(z, "Travel down to the last wipe tower layer."); gcode += gcodegen.writer().unretract(); } + // Tower compacted below the object, so any extrusion emitted without an explicit z has to be + // pulled back down to it first. + const bool compacted_below_object = m_sparse_layers_skipped && z >= 0. && (tcr.print_z - z) > EPSILON; // Process the end filament gcode. bool add_change_filament_624 = false; @@ -1085,11 +1095,23 @@ static std::vector get_path_of_change_filament(const Print& print) std::string nozzle_change_gcode_trans; if (is_nozzle_change) { // move to start_pos before nozzle change + // Orca: travel_to() lifts to the object layer height to clear the print. That lift is + // needed when arriving from the model, but is a wasted full-height Z bounce when the + // nozzle already sits on the compacted tower, so travel at the compacted z instead. + const bool compact_intower_nc_travel = compacted_below_object + && (tcr.print_z - gcodegen.writer().get_position().z()) > EPSILON; std::string start_pos_str; start_pos_str = gcodegen.travel_to(wipe_tower_point_to_object_point(gcodegen, transform_wt_pt(tcr.nozzle_change_result.start_pos) + plate_origin_2d), erMixed, - "Move to nozzle change start pos"); + "Move to nozzle change start pos", compact_intower_nc_travel ? z : DBL_MAX); check_add_eol(start_pos_str); nozzle_change_gcode_trans += start_pos_str; + // The nozzle-change wipe below carries no explicit z, so it would extrude at the object + // layer height and float above the compacted tower. Descend unless the travel stayed down. + if (!compact_intower_nc_travel && compacted_below_object) { + std::string nc_z_descend = gcodegen.writer().travel_to_z(z, "Descend to compacted wipe tower z (no sparse layers)"); + check_add_eol(nc_z_descend); + nozzle_change_gcode_trans += nc_z_descend; + } nozzle_change_gcode_trans += gcodegen.unretract(); nozzle_change_gcode_trans += transform_gcode(tcr.nozzle_change_result.gcode, tcr.nozzle_change_result.start_pos, wipe_tower_offset, wipe_tower_rotation); gcodegen.set_last_pos(wipe_tower_point_to_object_point(gcodegen, transform_wt_pt(tcr.nozzle_change_result.end_pos) + plate_origin_2d)); @@ -1428,6 +1450,15 @@ static std::vector get_path_of_change_filament(const Print& print) start_filament_gcode_str = start_filament_gcode_str + wipe_next_start_point_str + toolchange_unretract_str; + // Orca: the custom change_filament_gcode lifts to the object layer height and the unretract + // de-hops back to it, so every tower extrusion emitted after it (purge moves, and the wall + // when it prints after the toolchange) would float above the compacted tower. Descend first. + if (compacted_below_object) { + std::string z_descend = gcodegen.writer().travel_to_z(z, "Descend to compacted wipe tower z (no sparse layers)"); + check_add_eol(z_descend); + start_filament_gcode_str += z_descend; + } + // Insert the end filament, toolchange, and start filament gcode into the generated gcode. DynamicConfig config; config.set_key_value("filament_end_gcode", new ConfigOptionString(end_filament_gcode_str)); @@ -1915,11 +1946,9 @@ static std::vector get_path_of_change_filament(const Print& print) // resulting in a wipe tower with sparse layers. double wipe_tower_z = -1; bool ignore_sparse = false; - if (gcodegen.config().wipe_tower_no_sparse_layers.value) { + if (m_sparse_layers_skipped) { wipe_tower_z = m_last_wipe_tower_print_z; - ignore_sparse = (m_tool_changes[m_layer_idx].size() == 1 && - m_tool_changes[m_layer_idx].front().initial_tool == m_tool_changes[m_layer_idx].front().new_tool && - m_layer_idx != 0); + ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]) && m_layer_idx != 0; if (m_tool_change_idx == 0 && !ignore_sparse) wipe_tower_z = m_last_wipe_tower_print_z + m_tool_changes[m_layer_idx].front().layer_height; } @@ -1935,12 +1964,9 @@ static std::vector get_path_of_change_filament(const Print& print) // resulting in a wipe tower with sparse layers. double wipe_tower_z = -1; bool ignore_sparse = false; - if (gcodegen.config().wipe_tower_no_sparse_layers.value) { - wipe_tower_z = m_last_wipe_tower_print_z; - ignore_sparse = (m_tool_changes[m_layer_idx].size() == 1 && - m_tool_changes[m_layer_idx].front().initial_tool == m_tool_changes[m_layer_idx].front().new_tool); - if (m_tool_change_idx == 0 && !ignore_sparse) - wipe_tower_z = m_last_wipe_tower_print_z + m_tool_changes[m_layer_idx].front().layer_height; + if (m_sparse_layers_skipped) { + ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]); + wipe_tower_z = m_compacted_tower_z[m_layer_idx]; } if ((m_enable_timelapse_print || m_enable_wrapping_detection) && m_is_first_print) { @@ -1953,10 +1979,8 @@ static std::vector get_path_of_change_filament(const Print& print) if (!(size_t(m_tool_change_idx) < m_tool_changes[m_layer_idx].size())) throw Slic3r::RuntimeError("Wipe tower generation failed, possibly due to empty first layer."); - if (!ignore_sparse) { + if (!ignore_sparse) gcode += append_tcr(gcodegen, m_tool_changes[m_layer_idx][m_tool_change_idx++], extruder_id, wipe_tower_z); - m_last_wipe_tower_print_z = wipe_tower_z; - } } } @@ -1970,9 +1994,8 @@ static std::vector get_path_of_change_filament(const Print& print) return true; bool ignore_sparse = false; - if (gcodegen.config().wipe_tower_no_sparse_layers.value) { - ignore_sparse = (m_tool_changes[m_layer_idx].size() == 1 && m_tool_changes[m_layer_idx].front().initial_tool == m_tool_changes[m_layer_idx].front().new_tool); - } + if (m_sparse_layers_skipped) + ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]); if ((m_enable_timelapse_print || m_enable_wrapping_detection) && m_is_first_print) { return false; diff --git a/src/libslic3r/GCode.hpp b/src/libslic3r/GCode.hpp index 29e4638a94..3933fd4e56 100644 --- a/src/libslic3r/GCode.hpp +++ b/src/libslic3r/GCode.hpp @@ -106,8 +106,13 @@ public: m_enable_wrapping_detection(print_config.enable_wrapping_detection && (print_config.wrapping_exclude_area.values.size() > 2) && (slice_used_filaments.size() <= 1)), m_is_first_print(true), m_print_config(&print_config), - m_last_wipe_tower_print_z(print_config.z_offset.value) + m_last_wipe_tower_print_z(print_config.z_offset.value), + m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(print_config)) { + // Precomputed rather than accumulated while emitting, so that the clearance validator and + // the emitter cannot disagree about where the compacted tower sits on any given layer. + if (m_sparse_layers_skipped) + m_compacted_tower_z = compute_compacted_wipe_tower_z(tool_changes, float(print_config.z_offset.value)); // initialize with the extruder offset of master extruder id m_extruder_offsets.resize(print_config.filament_map.size(), print_config.extruder_offset.get_at(print_config.master_extruder_id.value - 1)); const auto& filament_map = print_config.filament_map.values; // 1 based idx @@ -167,6 +172,11 @@ private: float m_wipe_tower_depth; BoundingBoxf m_wipe_tower_bbx; Vec2f m_rib_offset{Vec2f(0, 0)}; + // wipe_tower_no_sparse_layers, as answered by the shared compaction rule rather than by the raw + // option: smooth timelapse and wrapping detection keep a tower on every layer regardless. + const bool m_sparse_layers_skipped; + // Print z of the compacted tower per planned layer. Empty when the tower is not compacted. + std::vector m_compacted_tower_z; }; class ColorPrintColors diff --git a/src/libslic3r/GCode/WipeTower.cpp b/src/libslic3r/GCode/WipeTower.cpp index e80433f4ae..eaf8a2eaf3 100644 --- a/src/libslic3r/GCode/WipeTower.cpp +++ b/src/libslic3r/GCode/WipeTower.cpp @@ -25,6 +25,30 @@ static constexpr int arc_fit_size = 20; enum class LimitFlow { None, LimitPrintFlow, LimitRammingFlow, LimitRammingFlowNC};//nc:nozzle change static const std::map nozzle_diameter_to_nozzle_change_width{{0.2f, 0.5f}, {0.4f, 1.0f}, {0.6f, 1.2f}, {0.8f, 1.4f}}; +bool wipe_tower_sparse_layers_skipped(const PrintConfig &config) +{ + return config.wipe_tower_no_sparse_layers.value && config.timelapse_type.value != TimelapseType::tlSmooth && + ! config.enable_wrapping_detection.value; +} + +bool wipe_tower_layer_is_sparse(const std::vector &layer_tool_changes) +{ + return layer_tool_changes.size() == 1 && layer_tool_changes.front().initial_tool == layer_tool_changes.front().new_tool; +} + +std::vector compute_compacted_wipe_tower_z(const std::vector> &tool_changes, + float base_z) +{ + std::vector tower_z(tool_changes.size(), base_z); + float last = base_z; + for (size_t i = 0; i < tool_changes.size(); ++i) { + if (! tool_changes[i].empty() && ! wipe_tower_layer_is_sparse(tool_changes[i])) + last += tool_changes[i].front().layer_height; + tower_z[i] = last; + } + return tower_z; +} + inline float align_round(float value, float base) { return std::round(value / base) * base; @@ -1879,7 +1903,7 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi m_z_pos(0.f), //m_bridging(float(config.wipe_tower_bridging)), m_bridging(10.f), - m_no_sparse_layers(config.wipe_tower_no_sparse_layers), + m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(config)), m_gcode_flavor(config.gcode_flavor), m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), m_current_tool(initial_tool), @@ -2977,7 +3001,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer(bool extrude_perimeter, bool // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (! m_no_sparse_layers || toolchanges_on_layer) + if (! m_sparse_layers_skipped || toolchanges_on_layer) if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); @@ -3021,7 +3045,7 @@ void WipeTower::plan_toolchange(float z_par, float layer_height_par, unsigned in if (m_plan.empty() || m_plan.back().z + WT_EPSILON < z_par) // if we moved to a new layer, we'll add it to m_plan first m_plan.push_back(WipeTowerInfo(z_par, layer_height_par)); - if (m_first_layer_idx == size_t(-1) && (! m_no_sparse_layers || old_tool != new_tool)) + if (m_first_layer_idx == size_t(-1) && (! m_sparse_layers_skipped || old_tool != new_tool)) m_first_layer_idx = m_plan.size() - 1; if (old_tool == new_tool) // new layer without toolchanges - we are done @@ -3874,7 +3898,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer_new(bool extrude_perimeter, // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_no_sparse_layers || toolchanges_on_layer) + if (!m_sparse_layers_skipped || toolchanges_on_layer) if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); @@ -3984,7 +4008,7 @@ WipeTower::ToolChangeResult WipeTower::finish_block(const WipeTowerBlock &block, // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_no_sparse_layers || toolchanges_on_layer) + if (!m_sparse_layers_skipped || toolchanges_on_layer) if (filament_id < m_used_filament_length.size()) m_used_filament_length[filament_id] += writer.get_and_reset_used_filament_length(); @@ -4101,7 +4125,7 @@ WipeTower::ToolChangeResult WipeTower::finish_block_solid(const WipeTowerBlock & // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_no_sparse_layers || toolchanges_on_layer) + if (!m_sparse_layers_skipped || toolchanges_on_layer) if (filament_id < m_used_filament_length.size()) m_used_filament_length[filament_id] += writer.get_and_reset_used_filament_length(); @@ -5155,7 +5179,7 @@ WipeTower::ToolChangeResult WipeTower::only_generate_out_wall(bool is_new_mode) // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_no_sparse_layers || toolchanges_on_layer) + if (!m_sparse_layers_skipped || toolchanges_on_layer) if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); return construct_tcr(writer, false, old_tool, true, false, 0.f, false); diff --git a/src/libslic3r/GCode/WipeTower.hpp b/src/libslic3r/GCode/WipeTower.hpp index 9303f09691..5426c9bd85 100644 --- a/src/libslic3r/GCode/WipeTower.hpp +++ b/src/libslic3r/GCode/WipeTower.hpp @@ -521,7 +521,7 @@ private: //float m_parking_pos_retraction = 0.f; //float m_extra_loading_move = 0.f; float m_bridging = 0.f; - bool m_no_sparse_layers = false; + bool m_sparse_layers_skipped = false; // BBS: remove useless config //bool m_set_extruder_trimpot = false; bool m_adhesion = true; @@ -680,6 +680,24 @@ private: }; +// Compaction rule for wipe_tower_no_sparse_layers. Shared by the G-code emitter and by the +// clearance validator so that both agree on where the compacted tower actually sits; a drift +// between the two would either let a real nozzle collision through or reject a safe plate. + +// Whether sparse layers are really skipped, i.e. whether the tower is compacted at all. Smooth +// timelapse and wrapping detection put a tower on every layer, so no layer is ever dropped and the +// tower keeps following the object even though the option is on. Tower planning, G-code emission and +// the clearance validator all ask this single question, so none of them can compact on its own. +bool wipe_tower_sparse_layers_skipped(const PrintConfig &config); + +// A planned layer prints no tower at all when its only toolchange keeps the same filament. +bool wipe_tower_layer_is_sparse(const std::vector &layer_tool_changes); + +// Print z the compacted tower reaches on every planned layer. Sparse layers carry over the +// previous value, so the tower falls one layer height behind the object for each of them. base_z is +// the z the tower starts from, which Orca offsets by z_offset. +std::vector compute_compacted_wipe_tower_z(const std::vector> &tool_changes, + float base_z = 0.f); } // namespace Slic3r diff --git a/src/libslic3r/GCode/WipeTower2.cpp b/src/libslic3r/GCode/WipeTower2.cpp index 4e752bd772..0080094270 100644 --- a/src/libslic3r/GCode/WipeTower2.cpp +++ b/src/libslic3r/GCode/WipeTower2.cpp @@ -1032,7 +1032,7 @@ WipeTower2::WipeTower2(const PrintConfig& config, const PrintRegionConfig& defau m_y_shift(0.f), m_z_pos(0.f), m_bridging(float(config.wipe_tower_bridging)), - m_no_sparse_layers(config.wipe_tower_no_sparse_layers), + m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(config)), m_gcode_flavor(config.gcode_flavor), m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), m_infill_speed(default_region_config.sparse_infill_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), @@ -1730,7 +1730,7 @@ void WipeTower2::toolchange_Change( } else if (m_wall_type == (int)wtwCone) { const double support_scale = get_wipe_tower_cone_base(m_wipe_tower_width, m_wipe_tower_height, m_wipe_tower_depth, m_wipe_tower_cone_angle).second; - const double z = m_no_sparse_layers ? (m_current_height + m_layer_info->height) : m_layer_info->z; + const double z = m_sparse_layers_skipped ? (m_current_height + m_layer_info->height) : m_layer_info->z; const double r = std::tan(Geometry::deg2rad(m_wipe_tower_cone_angle / 2.f)) * (m_wipe_tower_height - z); const double w = m_layer_info->depth + m_perimeter_width; if (r > 0.5 * w + 0.01) { // same guard as generate_support_cone_wall @@ -1872,7 +1872,7 @@ void WipeTower2::toolchange_Wipe( // All the calculations in all other places take the spacing into account for all the layers. // If spare layers are excluded->if 1 or less toolchange has been done, it must be sill the first layer, too.So slow down. - const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers) ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f); + const float target_speed = is_first_layer() || (m_num_tool_changes <= 1 && m_sparse_layers_skipped) ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f); float wipe_speed = 0.33f * target_speed; // if there is less than 2.5*line_width to the edge, advance straightaway (there is likely a blob anyway) @@ -1970,7 +1970,7 @@ WipeTower::ToolChangeResult WipeTower2::finish_layer() // Slow down on the 1st layer. // If spare layers are excluded -> if 1 or less toolchange has been done, it must be still the first layer, too. So slow down. - bool first_layer = is_first_layer() || (m_num_tool_changes <= 1 && m_no_sparse_layers); + bool first_layer = is_first_layer() || (m_num_tool_changes <= 1 && m_sparse_layers_skipped); float feedrate = first_layer ? m_first_layer_speed * 60.f : std::min(m_wipe_tower_max_purge_speed * 60.f, m_infill_speed * 60.f); if (m_enable_tower_interface_features && m_prev_layer_had_interface) feedrate = std::min(feedrate, 20.f * 60.f); @@ -2103,7 +2103,7 @@ WipeTower::ToolChangeResult WipeTower2::finish_layer() // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (! m_no_sparse_layers || toolchanges_on_layer || first_layer) { + if (! m_sparse_layers_skipped || toolchanges_on_layer || first_layer) { if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); m_current_height += m_layer_info->height; @@ -2226,7 +2226,7 @@ void WipeTower2::plan_toolchange(float z_par, float layer_height_par, unsigned i if (m_plan.empty() || m_plan.back().z + WT_EPSILON < z_par) // if we moved to a new layer, we'll add it to m_plan first m_plan.push_back(WipeTowerInfo(z_par, layer_height_par)); - if (m_first_layer_idx == size_t(-1) && (! m_no_sparse_layers || old_tool != new_tool || m_plan.size() == 1)) + if (m_first_layer_idx == size_t(-1) && (! m_sparse_layers_skipped || old_tool != new_tool || m_plan.size() == 1)) m_first_layer_idx = m_plan.size() - 1; if (old_tool == new_tool) // new layer without toolchanges - we are done @@ -2652,7 +2652,7 @@ Polygon WipeTower2::generate_support_cone_wall( const auto [R, support_scale] = get_wipe_tower_cone_base(m_wipe_tower_width, m_wipe_tower_height, m_wipe_tower_depth, m_wipe_tower_cone_angle); - double z = m_no_sparse_layers ? + double z = m_sparse_layers_skipped ? (m_current_height + m_layer_info->height) : m_layer_info->z; // the former should actually work in both cases, but let's stay on the safe side (the 2.6.0 is close) diff --git a/src/libslic3r/GCode/WipeTower2.hpp b/src/libslic3r/GCode/WipeTower2.hpp index 232cad1a6b..eb3a2562fb 100644 --- a/src/libslic3r/GCode/WipeTower2.hpp +++ b/src/libslic3r/GCode/WipeTower2.hpp @@ -267,7 +267,7 @@ private: float m_parking_pos_retraction = 0.f; float m_extra_loading_move = 0.f; float m_bridging = 0.f; - bool m_no_sparse_layers = false; + bool m_sparse_layers_skipped = false; bool m_set_extruder_trimpot = false; bool m_adhesion = true; GCodeFlavor m_gcode_flavor; diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp index deae560d7c..b2b5d9277b 100644 --- a/src/libslic3r/Preset.cpp +++ b/src/libslic3r/Preset.cpp @@ -1447,7 +1447,7 @@ static std::vector s_Preset_printer_options { "gcode_skip_config_block", "fan_kickstart", "part_cooling_fan_min_pwm", "fan_speedup_time", "fan_speedup_overhangs", "single_extruder_multi_material", "manual_filament_change", "file_start_gcode", "machine_start_gcode", "machine_end_gcode", "before_layer_change_gcode", "printing_by_object_gcode", "layer_change_gcode", "time_lapse_gcode", "wrapping_detection_gcode", "change_filament_gcode", "change_extrusion_role_gcode", "printer_model", "printer_variant", "printer_extruder_id", "printer_extruder_variant", "extruder_variant_list", "default_nozzle_volume_type", - "printable_height", "extruder_printable_height", "extruder_clearance_radius", "extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod", + "printable_height", "extruder_printable_height", "extruder_clearance_radius", "extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod", "extruder_clearance_dist_to_rod", "nozzle_height", "master_extruder_id", "default_print_profile", "inherits", "silent_mode", diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index 13fe7758ff..833b811535 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -966,6 +966,377 @@ StringObjectException Print::sequential_print_clearance_valid(const Print &print return single_object_exception; } +// --------------------------------------------------------------------------------------------- +// Clearance rule for a prime tower compacted by wipe_tower_no_sparse_layers. +// Ported from BambuStudio and adapted to Orca's printer config: Orca has no +// prime_tower_lift_height (z_hop alone bounds the spiral), spells the toolhead radius +// extruder_clearance_radius, and derives the spiral slope from the per-filament travel_slope instead +// of one global constant. +// --------------------------------------------------------------------------------------------- + +double compacted_tower_footprint_padding(const PrintConfig &config, double brim_width) +{ + // The brim is deposited material like any other and reaches past the wall on the first layer, so + // the sweeping rod has to clear it too. + // + // On top of it, two effects make a nominal outline fall short of the printed tower on its low + // corner even though it overshoots by millimetres on the high one: WipeTower re-centres the tower + // by rib_offset once its first-layer wall is known, and the precise check hulls extrusion centre + // lines, so the deposited material reaches half a line width further still. Allowing a line width + // per side covers both, which is what keeps an estimated footprint enclosing the real one and the + // pre-slice check stricter than the precise one. + return std::max(0., brim_width) + 2. * config.nozzle_diameter.get_at(0); +} + +Polygons compacted_wipe_tower_rings(const CompactedTowerZone &zone, bool any_body_tier) +{ + Polygons rings = zone.grown_nozzle; + if (any_body_tier) + append(rings, zone.grown_body); + return rings; +} + +CompactedTowerZone compacted_wipe_tower_zone(const PrintConfig &config, const Polygon &tower_footprint) +{ + CompactedTowerZone zone; + if (tower_footprint.points.empty()) + return zone; + + // Spiral Z-hop at wipe-tower entry (the G3 Z I J that GCodeWriter emits for a SpiralLift) starts on + // the tower outline at a low Z. The spiral centre sits one radius away from the start point, so the + // circle reaches 2 * radius beyond the outline. radius = lift / (2*pi*atan(travel_slope)) is the + // same formula GCodeWriter uses; both are per filament, so take the widest any filament can make. + double spiral_reach = 0.; + for (size_t i = 0; i < config.z_hop.size(); ++i) { + const double lift = std::min(double(config.z_hop.get_at(i)), 5.); + if (lift < EPSILON) + continue; + const double slope = i < config.travel_slope.size() ? double(config.travel_slope.get_at(i)) : 0.; + if (slope < EPSILON) + continue; + spiral_reach = std::max(spiral_reach, 2. * lift / (2. * PI * std::atan(slope))); + } + + // Working footprint = outline grown by the spiral envelope. All later clearance tests use this, so + // a travel that leaves the deposited wall at low Z is still treated as part of the tower. + zone.hull = tower_footprint; + if (spiral_reach > EPSILON) { + const Polygons grown = offset(tower_footprint, float(scale_(spiral_reach)), jtRound, scale_(0.1)); + if (! grown.empty()) + zone.hull = Geometry::convex_hull(grown); + } + + // The rod sweeps the whole X axis, so its keep-out band is the tower's Y span widened by half + // the nozzle-to-rod offset per side (the instance carries the other half). Orca's sequential + // check has no such margin, having had no option to read it from until now. + zone.bbox_rod = zone.hull.bounding_box(); + zone.bbox_rod.offset(scale_(config.extruder_clearance_dist_to_rod.value * 0.5)); + + // Horizontal clearance, mirroring the sequential print check down to how the distance is split: + // there each of the two object hulls grows by half of extruder_clearance_radius, so the two + // outlines touch exactly when the objects are the full radius apart. Splitting it the same way + // here (half on the tower, half on the instance in compacted_wipe_tower_clearance) states the + // same criterion, and it is what lets the plater draw both outlines: they meet at the instant the + // check trips, instead of one of them being already buried inside the other. The smaller + // MAX_OUTER_NOZZLE_DIAMETER tier is the bare nozzle cone, the only part narrow enough to sit + // beside an object rising less than nozzle_height. The 0.2 mm shaved off is the same rounding + // slack the sequential check applies, 0.1 mm per side. Both rings are built here; which one a + // given object is measured against depends on its own height and is decided in + // compacted_wipe_tower_clearance(). + zone.body_radius = config.extruder_clearance_radius.value; + zone.grown_body = offset(zone.hull, float(scale_(compacted_tower_half_clearance(zone.body_radius))), jtRound, scale_(0.1)); + zone.grown_nozzle = offset(zone.hull, float(scale_(compacted_tower_half_clearance(MAX_OUTER_NOZZLE_DIAMETER))), jtRound, scale_(0.1)); + return zone; +} + +CompactedTowerClearance compacted_wipe_tower_clearance(const PrintConfig &config, const CompactedTowerZone &zone, + const Polygon &inst_hull, double object_rise) +{ + BoundingBox inst_bbox = inst_hull.bounding_box(); + inst_bbox.offset(scale_(config.extruder_clearance_dist_to_rod.value * 0.5)); + + // Only the Y span matters for the rod: it spans the whole X axis, so an object sharing the tower's + // Y band passes under it however far apart the two are in X. + const bool overlaps_in_y = std::min(inst_bbox.max.y(), zone.bbox_rod.max.y()) - std::max(inst_bbox.min.y(), zone.bbox_rod.min.y()) > 0; + + CompactedTowerClearance result; + result.far_clearance = overlaps_in_y ? config.extruder_clearance_height_to_rod.value : config.extruder_clearance_height_to_lid.value; + + // The rod and the lid are the only obstacles once the object stands far enough away. Closer than + // the toolhead radius it is the head body itself that hits the object, and it does so as soon as + // the object rises past the nozzle cone, which is far below the rod. + // The instance carries the other half of each clearance, the tower rings already hold the first + // half; see compacted_wipe_tower_zone(). Both halves are needed for the verdict to mean + // "a full radius apart", and drawing what is tested is what keeps the plater honest. + // + // Which tier applies is a property of this object alone: the head body sits above the nozzle cone, + // so it cannot reach an object that stays below nozzle_height however close it stands, and however + // tall the rest of the plate is. + const bool object_is_short = object_rise <= double(config.nozzle_height.value) + EPSILON; + result.body_clearance = object_is_short ? double(MAX_OUTER_NOZZLE_DIAMETER) : zone.body_radius; + + const Polygons inst_near_nozzle = offset(inst_hull, float(scale_(compacted_tower_half_clearance(MAX_OUTER_NOZZLE_DIAMETER))), jtRound, scale_(0.1)); + const bool near_nozzle = ! intersection(zone.grown_nozzle, inst_near_nozzle).empty(); + result.near_body = false; + if (! object_is_short) { + const Polygons inst_near_body = offset(inst_hull, float(scale_(compacted_tower_half_clearance(zone.body_radius))), jtRound, scale_(0.1)); + result.near_body = ! intersection(zone.grown_body, inst_near_body).empty(); + } + + result.allowed_rise = result.far_clearance; + if (near_nozzle) + result.allowed_rise = 0.; + else if (result.near_body) + result.allowed_rise = std::min(result.far_clearance, double(config.nozzle_height.value)); + return result; +} + +Polygon compacted_wipe_tower_offender_outline(const Polygon &inst_hull, double body_clearance) +{ + // Exactly the half-clearance the check grew this instance by, so the halo drawn around an object is + // the very outline that was tested against the tower ring of the same tier. Passing the clearance + // the object was actually judged on keeps a short object from being drawn with the wide ring it is + // not subject to. + const Polygons grown = offset(inst_hull, float(scale_(compacted_tower_half_clearance(body_clearance))), jtRound, scale_(0.1)); + return grown.empty() ? inst_hull : grown.front(); +} + +// Shared user-facing message for every compacted-tower clearance failure. Height-limit and too-close +// are the same class of layout violation under "No sparse layers", so they share one wording. +static std::string compacted_wipe_tower_clearance_error() +{ + return L("The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"."); +} + +// Convex hull of one print instance in bed coordinates, the same outline both compacted tower checks +// compare against the tower. +static Polygon compacted_tower_print_instance_hull(const PrintObject &object, const PrintInstance &instance) +{ + Points pts; + for (const ModelVolume *v : object.model_object()->volumes) { + if (! v->is_model_part()) + continue; + Polygon hull = v->get_convex_hull_2d(Geometry::assemble_transform(Vec3d::Zero(), instance.model_instance->get_rotation(), + instance.model_instance->get_scaling_factor(), instance.model_instance->get_mirror())); + hull.translate(instance.shift - object.center_offset()); + append(pts, hull.points); + } + return pts.empty() ? Polygon() : Geometry::convex_hull(pts); +} + +// Footprint the compacted prime tower is expected to occupy on the plate, in bed coordinates. +// Before psWipeTower has run there is no tower geometry at all, so this falls back to the same +// estimate the plater builds its preview box from. Answering while the user is still arranging the +// plate is the whole point of the pre-slice check, and an estimate is all that can be had then. +static Polygon estimated_wipe_tower_footprint(const Print &print) +{ + const PrintConfig &config = print.config(); + const size_t filaments_cnt = print.extruders().size(); + if (filaments_cnt == 0) + return Polygon(); + + const WipeTowerData &wtd = print.wipe_tower_data(filaments_cnt); + + double width, depth, brim; + Vec2d local_min; + if (wtd.bbx.size().x() > EPSILON && wtd.bbx.size().y() > EPSILON) { + // The tower has already been generated once, so use its real box (brim included) instead of + // re-estimating. Same frame first_layer_wipe_tower_corners() works in. + width = wtd.bbx.size().x(); + depth = wtd.bbx.size().y(); + local_min = wtd.bbx.min + wtd.rib_offset.cast(); + brim = 0.; + } else { + depth = wtd.depth; + if (depth < EPSILON) + return Polygon(); + // PartPlate::estimate_wipe_tower_size() squares the rib tower off and the preview box the user + // drags around is built from that, so match it here rather than keeping the nominal width. + width = config.wipe_tower_wall_type.value == WipeTowerWallType::wtwRib ? depth : double(config.prime_tower_width.value); + local_min = Vec2d::Zero(); + brim = double(wtd.brim_width); + } + + const double padding = compacted_tower_footprint_padding(config, brim); + local_min -= Vec2d(padding, padding); + width += 2. * padding; + depth += 2. * padding; + + const Eigen::Rotation2Dd rot(Geometry::deg2rad(config.wipe_tower_rotation_angle.value)); + const Vec2d translate(config.wipe_tower_x.get_at(print.get_plate_index()) + print.get_plate_origin()(0), + config.wipe_tower_y.get_at(print.get_plate_index()) + print.get_plate_origin()(1)); + + Polygon footprint; + for (const Vec2d &corner : { local_min, + Vec2d(local_min.x() + width, local_min.y()), + Vec2d(local_min.x() + width, local_min.y() + depth), + Vec2d(local_min.x(), local_min.y() + depth) }) { + const Vec2d p = rot * corner + translate; + footprint.points.emplace_back(scale_(p.x()), scale_(p.y())); + } + return footprint; +} + +// Pre-slice counterpart of validate_compacted_wipe_tower_clearance(). It applies the very same +// clearance rule, but to an estimated tower footprint instead of the real tool-change extrusions, +// which is what lets it run from Print::validate() before anything has been sliced. Reporting through +// polygons / height_polygons rather than by throwing is what puts the collision area and the height +// limit plane on the plater, exactly the way sequential printing does it. +StringObjectException Print::compacted_wipe_tower_clearance_valid(const Print &print, Polygons *polygons, std::vector> *height_polygons) +{ + const PrintConfig &config = print.config(); + if (! wipe_tower_sparse_layers_skipped(config) || config.print_sequence != PrintSequence::ByLayer || ! print.has_wipe_tower()) + return {}; + + const CompactedTowerZone zone = compacted_wipe_tower_zone(config, estimated_wipe_tower_footprint(print)); + if (zone.empty()) + return {}; + + StringObjectException exception; + Polygons offenders; + bool body_tier_used = false; + for (const PrintObject *object : print.objects()) { + const double object_top = unscaled(object->max_z()); + for (const PrintInstance &instance : object->instances()) { + const Polygon inst_hull = compacted_tower_print_instance_hull(*object, instance); + if (inst_hull.points.empty()) + continue; + const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(config, zone, inst_hull, object_top); + body_tier_used = body_tier_used || compacted_tower_body_tier(clearance); + // Every tier the precise check applies is applied here too, otherwise an object standing + // within the toolhead radius would pass here and then be rejected mid-slice, which is the + // one outcome this check exists to prevent. The compacted tower base is unknown before + // slicing, so the rise is measured from the plate rather than from the tower top; that + // overstates it by the tower's own height and makes this check err strict, never lax. + if (object_top <= clearance.allowed_rise + EPSILON) + continue; + + // Height-limit and too-close cases share one user-facing message: both mean the layout + // violates the "No sparse layers" clearance rule, and the remedies are the same. + const std::string msg = compacted_wipe_tower_clearance_error(); + if (exception.string.empty()) { + exception.string = msg; + exception.object = instance.model_instance; + } else { + // Same wording for every offender; keep a single copy and drop the object pointer. + exception.object = nullptr; + } + const Polygon outline = compacted_wipe_tower_offender_outline(inst_hull, clearance.body_clearance); + offenders.emplace_back(outline); + if (height_polygons) + height_polygons->emplace_back(outline, float(clearance.allowed_rise)); + } + } + + // Draw the tower's keep-out ring alongside the offending objects, so the collision area reads as + // "this object reaches into the space the toolhead needs around the tower" rather than as a lone + // highlighted object. Emitted only on a real collision; the plater discards polygons otherwise. + // Only the rings some object on this plate is actually measured against are drawn, so that a ring + // and an object outline touching always means that object is over its limit. + if (polygons && ! offenders.empty()) { + append(*polygons, compacted_wipe_tower_rings(zone, body_tier_used)); + append(*polygons, offenders); + } + return exception; +} + +// With wipe_tower_no_sparse_layers the tower only grows on layers that carry a real toolchange, +// so it ends up far below the object and the nozzle has to descend to it. While the nozzle sits +// down on the compacted tower the rod is at tower_z + extruder_clearance_height_to_rod, and it +// sweeps the tower's Y band across the whole X axis. Anything already printed above that line and +// sharing the band gets hit. Nearer than the toolhead radius the head body hits the object well before +// the rod does, which is the horizontal half of the same problem. The spiral Z-hop that opens a wipe- +// tower travel also leaves the extrusion outline at a low Z, so the footprint used here is the +// deposited hull grown by the spiral circle's maximum reach. This mirrors both clearance checks of +// sequential printing, except that the tower is revisited over and over, so every object is compared +// against it. +void Print::validate_compacted_wipe_tower_clearance() const +{ + // Nothing to check when the tower is not compacted: it then follows the object as usual and the + // regular by-layer clearance check already covers it. Asking wipe_tower_sparse_layers_skipped() + // rather than the raw option keeps this from rejecting plates whose tower is in fact full height. + if (! wipe_tower_sparse_layers_skipped(m_config) || m_config.print_sequence != PrintSequence::ByLayer) + return; + + const std::vector> &tool_changes = m_wipe_tower_data.tool_changes; + if (tool_changes.empty() || m_objects.empty()) + return; + + // Same accumulation the G-code emitter runs, so validation and output cannot disagree. + const std::vector tower_z = compute_compacted_wipe_tower_z(tool_changes, float(m_config.z_offset.value)); + + // Wipe tower footprint: build it from the ACTUAL tool-change extrusions rather than the nominal + // width x depth rectangle returned by first_layer_wipe_tower_corners(). With a rib wall the printed + // wall bulges past the nominal box and the first-layer brim reaches even further; the nominal box + // (m_wipe_tower_data.bbx) undercounts that outermost extent by several millimetres, which is + // exactly the extent that decides how close the sweeping rod comes to a neighbouring object. The + // extrusion end-points are stored in the wipe-tower local frame, so we map them to the bed frame + // with the same transform the G-code emitter applies. The two emitters differ in where rib_offset + // enters: WipeTowerIntegration::append_tcr() (type 1) rotates the point and then adds the offset, + // append_tcr2() (type 2) adds it before rotating. On a rotated rib-wall tower the two land several + // millimetres apart, which is exactly the margin this check measures, so follow the emitter in use. + const Eigen::Rotation2Dd wt_rot(Geometry::deg2rad(m_config.wipe_tower_rotation_angle.value)); + const Vec2d wt_translate(m_config.wipe_tower_x.get_at(m_plate_index) + m_origin(0), + m_config.wipe_tower_y.get_at(m_plate_index) + m_origin(1)); + const Vec2d rib_off = m_wipe_tower_data.rib_offset.cast(); + const bool rib_off_rotates = this->wipe_tower_type() == WipeTowerType::Type2; + auto to_bed = [&wt_rot, &wt_translate, &rib_off, rib_off_rotates](const Vec2d &pt) { + return rib_off_rotates ? Vec2d(wt_rot * (pt + rib_off) + wt_translate) : Vec2d(wt_rot * pt + wt_translate + rib_off); + }; + + Points tower_pts; + for (const std::vector &layer : tool_changes) { + if (layer.empty() || wipe_tower_layer_is_sparse(layer)) + continue; + for (const WipeTower::ToolChangeResult &tcr : layer) + for (size_t i = 0; i < tcr.extrusions.size(); ++i) { + // A zero width marks a travel end-point. Keep it only when it opens a real extrusion, so + // the hull covers the deposited material and nothing else; travels reach a bit further out + // than the walls do. + const WipeTower::Extrusion &e = tcr.extrusions[i]; + if (e.width == 0.f && (i + 1 == tcr.extrusions.size() || tcr.extrusions[i + 1].width == 0.f)) + continue; + const Vec2d p = to_bed(Vec2d(e.pos.x(), e.pos.y())); + tower_pts.emplace_back(scale_(p.x()), scale_(p.y())); + } + } + if (tower_pts.empty()) + return; + + const CompactedTowerZone zone = compacted_wipe_tower_zone(m_config, Geometry::convex_hull(tower_pts)); + if (zone.empty()) + return; + + for (const PrintObject *object : m_objects) { + const double object_top = unscaled(object->max_z()); + for (const PrintInstance &instance : object->instances()) { + const Polygon inst_hull = compacted_tower_print_instance_hull(*object, instance); + if (inst_hull.points.empty()) + continue; + + // Report the worst layer rather than the first offending one, it is the one that explains the + // collision best. The rise has to be known before the clearance: it is what selects the + // horizontal tier, the nozzle cone being out of the head body's reach. + double max_rise = 0.; + for (size_t i = 0; i < tool_changes.size(); ++i) { + if (tool_changes[i].empty() || wipe_tower_layer_is_sparse(tool_changes[i])) + continue; + // Nothing above the current layer exists yet, so a tall object only counts up to it. + const double rise = std::min(object_top, double(tool_changes[i].front().print_z)) - tower_z[i]; + if (rise > max_rise) + max_rise = rise; + } + + const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(m_config, zone, inst_hull, max_rise); + if (max_rise <= clearance.allowed_rise + EPSILON) + continue; + // Same wording as compacted_wipe_tower_clearance_valid(): height-limit and too-close + // share one message, since both are layout violations of "No sparse layers". + throw Slic3r::SlicingError(compacted_wipe_tower_clearance_error()); + } + } +} + //BBS static StringObjectException layered_print_cleareance_valid(const Print &print, StringObjectException *warning) { @@ -1410,6 +1781,16 @@ StringObjectException Print::validate(std::vector *warnin } if (!layer_warning.string.empty()) add_warning(layer_warning); + + // Orca: a compacted prime tower drags the nozzle back down to the plate on every toolchange, so + // tall objects collide with it much like they do in sequential printing. Checking it here rather + // than only during slicing is what lets the plater show the collision area and the height limit + // while the plate is still being arranged. + ret = compacted_wipe_tower_clearance_valid(*this, collison_polygons, height_polygons); + if (!ret.string.empty()) { + ret.type = STRING_EXCEPT_OBJECT_COLLISION_IN_LAYER_PRINT; + return ret; + } } if (m_config.enable_prime_tower) { @@ -2622,6 +3003,12 @@ void Print::process(long long *time_cost_with_cache, bool use_cache) if (this->has_wipe_tower()) { m_fake_wipe_tower.set_pos({ m_config.wipe_tower_x.get_at(m_plate_index), m_config.wipe_tower_y.get_at(m_plate_index) }); + // Validated on every process() run rather than only when the wipe tower step is (re)generated. + // Moving the tower changes only wipe_tower_x/y, which invalidates psSkirtBrim but not psWipeTower, + // so a validate call living inside _make_wipe_tower would be skipped and keep using the stale + // position, missing a fresh collision. The tower geometry (tool_changes) is stored in the local + // frame and is position independent, so re-checking here with the current position is correct. + this->validate_compacted_wipe_tower_clearance(); } if (this->set_started(psSkirtBrim)) { diff --git a/src/libslic3r/Print.hpp b/src/libslic3r/Print.hpp index 9822c5520c..9c1782e047 100644 --- a/src/libslic3r/Print.hpp +++ b/src/libslic3r/Print.hpp @@ -1160,6 +1160,8 @@ public: //BBS static StringObjectException sequential_print_clearance_valid(const Print &print, Polygons *polygons = nullptr, std::vector>* height_polygons = nullptr); + // Orca: pre-slice clearance check for a prime tower compacted by "No sparse layers". + static StringObjectException compacted_wipe_tower_clearance_valid(const Print &print, Polygons *polygons = nullptr, std::vector>* height_polygons = nullptr); ConflictResultOpt get_conflict_result() const { return m_conflict_result; } // Return 4 wipe tower corners in the world coordinates (shifted and rotated), including the wipe tower brim. @@ -1174,6 +1176,8 @@ public: void set_calib_params(const Calib_Params& params); const Calib_Params& calib_params() const { return m_calib_params; } Vec2d translate_to_print_space(const Vec2d &point) const; + // Orca: precise counterpart of compacted_wipe_tower_clearance_valid(), run once the tower exists. + void validate_compacted_wipe_tower_clearance() const; float get_wipe_tower_depth() const { return m_wipe_tower_data.depth; } BoundingBoxf get_wipe_tower_bbx() const { return m_wipe_tower_data.bbx; } Vec2f get_rib_offset() const { return m_wipe_tower_data.rib_offset; } @@ -1394,6 +1398,89 @@ public: }; +// --------------------------------------------------------------------------------------------- +// Clearance rule for a prime tower compacted by wipe_tower_no_sparse_layers. Shared by the precise +// check that runs on the real extrusions, the pre-slice estimate that feeds the plater with collision +// polygons, and the plater's own live preview while the user drags the tower or an object around. +// Keeping the rule in one place is what stops those three from drifting apart and reporting different +// things for the same plate. +// --------------------------------------------------------------------------------------------- + +// Half of a clearance distance, the share each of the two outlines carries. Sequential printing splits +// extruder_clearance_radius between the two object hulls this way; the tower checks split their +// clearances between the tower ring and the instance hull for the same reason, so that the two +// outlines the plater draws touch precisely when the check trips. The 0.2 mm comes off first: it is +// the rounding slack the sequential check applies, 0.1 mm per side. +inline double compacted_tower_half_clearance(double clearance) { return 0.5 * (clearance - 0.2); } + +// Keep-out geometry a compacted tower projects onto the plate, derived from its bare footprint. +struct CompactedTowerZone +{ + // Footprint the checks work on: the raw outline grown by the spiral Z-hop envelope. + Polygon hull; + // hull grown by half the toolhead radius; an object whose own half-grown hull reaches into it is + // hit by the head body. This is also the ring the plater draws. + Polygons grown_body; + // hull grown by half the bare nozzle cone radius, the innermost tier. + Polygons grown_nozzle; + // hull bounding box, the Y band the rod sweeps. + BoundingBox bbox_rod; + // Full body clearance, of which grown_body carries half. Which of the two tiers applies is decided + // per object rather than here; see compacted_wipe_tower_clearance(). + double body_radius { 0. }; + + bool empty() const { return hull.points.empty(); } +}; + +// Per-side padding a bare wipe tower outline needs before the clearance checks may treat it as the +// tower's footprint. Callers whose outline already carries the first-layer brim pass zero for it. +// Shared by the pre-slice estimate and the plater's live preview: both start from an outline that +// falls short of the printed tower in the same two ways, and padding them by different amounts is +// exactly how the preview and the validation behind it would end up disagreeing. +double compacted_tower_footprint_padding(const PrintConfig &config, double brim_width); + +// Grow a bare tower footprint (bed frame, scaled) into its keep-out zone. +CompactedTowerZone compacted_wipe_tower_zone(const PrintConfig &config, const Polygon &tower_footprint); + +// How far an object may rise above the compacted tower base before the toolhead hits it. +struct CompactedTowerClearance +{ + // Height the object may reach above the tower base. Zero means it may not rise at all. + double allowed_rise; + // Clearance that applies once the object stands clear of the toolhead in XY, i.e. rod or lid. + double far_clearance; + // The object sits within the toolhead radius, so the head body limits it rather than the rod. + bool near_body; + // Horizontal clearance this particular object has to keep from the tower: the full toolhead + // radius once it rises past the nozzle cone, the bare cone while it stays below. It is what the + // error message quotes and what the plater grows the object outline by. + double body_clearance; +}; + +// object_rise is the height above the tower base that the caller is going to compare against +// allowed_rise. It also selects the horizontal tier, so the two cannot disagree. +CompactedTowerClearance compacted_wipe_tower_clearance(const PrintConfig &config, const CompactedTowerZone &zone, + const Polygon &inst_hull, double object_rise); + +// This object was judged on a tier reaching past the bare nozzle cone, so the wide ring is the one its +// outline has to be drawn against. +inline bool compacted_tower_body_tier(const CompactedTowerClearance &clearance) +{ + return clearance.body_clearance > double(MAX_OUTER_NOZZLE_DIAMETER); +} + +// Keep-out rings to draw around the tower. The nozzle one always applies; the wide body one is drawn +// only when some object on the plate is actually measured against it, otherwise it would show a +// keep-out zone no object can violate. +Polygons compacted_wipe_tower_rings(const CompactedTowerZone &zone, bool any_body_tier); + +// Outline to hand the plater for an offending object: the instance hull grown by the same half +// clearance the check grew it by, which is CompactedTowerClearance::body_clearance for that object. +// Sequential printing reports its hulls the same way, and it doubles as the fix for the bare hull +// being unusable on screen, where drawn flat it hides under the object and drawn at the height limit +// it ends up buried inside the mesh. +Polygon compacted_wipe_tower_offender_outline(const Polygon &inst_hull, double body_clearance); + } /* slic3r_Print_hpp_ */ #endif diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 74d332ca01..f187e6ab82 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -2549,6 +2549,16 @@ void PrintConfigDef::init_fff_params() def->enum_labels.push_back("5"); def->mode = comAdvanced; + // Orca: already carried by the BBL/Qidi/Geeetech/Eryone machine profiles, which inherited it from + // the BambuStudio import; without a definition here it was parsed as an unknown key and dropped. + def = this->add("extruder_clearance_dist_to_rod", coFloat); + def->label = L("Distance to rod"); + def->tooltip = L("Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing."); + def->sidetext = L("mm"); // millimeters, CIS languages need translation + def->min = 0; + def->mode = comAdvanced; + def->set_default_value(new ConfigOptionFloat(40)); + def = this->add("extruder_clearance_height_to_rod", coFloat); def->label = L("Height to rod"); def->tooltip = L("Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing."); @@ -6673,8 +6683,10 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe_tower_no_sparse_layers", coBool); def->label = L("No sparse layers (beta)"); def->tooltip = L("If enabled, the wipe tower will not be printed on layers with no tool changes. " - "On layers with a tool change, extruder will travel downward to print the wipe tower. " - "User is responsible for ensuring there is no collision with the print."); + "On layers with a tool change, extruder will travel downward to print the wipe tower, " + "so the tower ends up below the model and the toolhead has to reach down to it. " + "Layouts where that would collide with an already printed object are rejected. " + "Has no effect with smooth timelapse or clumping detection, which need a tower on every layer."); def->mode = comAdvanced; def->set_default_value(new ConfigOptionBool(false)); diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index 3373fbece7..d161863a9c 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -1790,6 +1790,7 @@ PRINT_CONFIG_CLASS_DERIVED_DEFINE( ((ConfigOptionBools, slow_down_for_layer_cooling)) ((ConfigOptionInts, close_fan_the_first_x_layers)) ((ConfigOptionEnum, draft_shield)) + ((ConfigOptionFloat, extruder_clearance_dist_to_rod))//BBS ((ConfigOptionFloat, extruder_clearance_height_to_rod))//BBs ((ConfigOptionFloat, extruder_clearance_height_to_lid))//BBS ((ConfigOptionFloat, extruder_clearance_radius)) diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp index f0f0adfa38..0244710298 100644 --- a/src/slic3r/GUI/ConfigManipulation.cpp +++ b/src/slic3r/GUI/ConfigManipulation.cpp @@ -1041,10 +1041,12 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in for (auto el : {"wipe_tower_rotation_angle", "wipe_tower_cone_angle", "wipe_tower_extra_spacing", "wipe_tower_max_purge_speed", - "wipe_tower_bridging", "wipe_tower_extra_flow", - "wipe_tower_no_sparse_layers"}) + "wipe_tower_bridging", "wipe_tower_extra_flow"}) toggle_line(el, have_prime_tower && supports_wipe_tower_2); + // Orca: both tower generators skip sparse layers, so this is not a wipe tower 2 exclusive. + toggle_line("wipe_tower_no_sparse_layers", have_prime_tower); + WipeTowerWallType wipe_tower_wall_type = config->opt_enum("wipe_tower_wall_type"); bool have_rib_wall = (wipe_tower_wall_type == WipeTowerWallType::wtwRib)&&have_prime_tower; toggle_line("wipe_tower_cone_angle", have_prime_tower && supports_wipe_tower_2 && wipe_tower_wall_type == WipeTowerWallType::wtwCone); diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 76192491bf..83c8cba0ee 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -4316,6 +4316,9 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) if (can_sequential_clearance_show_in_gizmo()) update_sequential_clearance(); } else { + // Orca: by-layer counterpart, for a prime tower compacted by "No sparse layers". + if (current_printer_technology() == ptFFF && can_sequential_clearance_show_in_gizmo()) + update_compacted_wipe_tower_clearance(); if (c == GLGizmosManager::EType::Move || c == GLGizmosManager::EType::Scale || c == GLGizmosManager::EType::Rotate) @@ -4549,8 +4552,12 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) TransformationType trafo_type; trafo_type.set_relative(); m_selection.translate(cur_pos - m_mouse.drag.start_position_3D, trafo_type); - if (current_printer_technology() == ptFFF && (fff_print()->config().print_sequence == PrintSequence::ByObject)) - update_sequential_clearance(); + if (current_printer_technology() == ptFFF) { + if (fff_print()->config().print_sequence == PrintSequence::ByObject) + update_sequential_clearance(); + else + update_compacted_wipe_tower_clearance(); + } // BBS //wxGetApp().obj_manipul()->set_dirty(); m_dirty = true; @@ -5614,6 +5621,101 @@ bool GLCanvas3D::can_sequential_clearance_show_in_gizmo() { return false; } +// Live preview of the compacted prime tower clearance, the by-layer counterpart of +// update_sequential_clearance(). Called while the user drags a volume / gizmo; idle visibility +// matches sequential print (hidden when valid, filled when Print::validate reports a collision). +// Print::compacted_wipe_tower_clearance_valid() answers the same question authoritatively, but it +// reads the tower position from the config, which only catches up once do_move() writes it back on +// mouse release. Recomputing from the volumes here is what makes the keep-out zone follow the tower +// while it is still under the cursor. +void GLCanvas3D::update_compacted_wipe_tower_clearance() +{ + if (current_printer_technology() != ptFFF) + return; + const Print *print = fff_print(); + if (print == nullptr) + return; + const PrintConfig &config = print->config(); + if (config.print_sequence != PrintSequence::ByLayer || ! wipe_tower_sparse_layers_skipped(config) || ! print->has_wipe_tower()) + return; + + PartPlateList &plate_list = wxGetApp().plater()->get_partplate_list(); + PartPlate *plate = plate_list.get_curr_plate(); + if (plate == nullptr) + return; + const int plate_id = plate_list.get_curr_plate_index(); + + // Once the tower has been generated the scene shows its real mesh with the brim merged in, + // otherwise it is a bare estimated cube with no brim at all. Only the latter needs the brim added + // here, and the width comes from WipeTowerData, the same source the preview box is sized from, so + // the zone cannot be padded against a brim the preview was not built with. + const bool preview_carries_brim = print->is_step_done(psWipeTower) && print->wipe_tower_data().wipe_tower_mesh_data.has_value(); + const double brim = preview_carries_brim ? 0. : double(print->wipe_tower_data(print->extruders().size()).brim_width); + const double padding = compacted_tower_footprint_padding(config, brim); + + // Tower footprint straight from the volume the user sees, so that dragging either the tower or an + // object updates the zone on the very next frame. + Polygon tower_footprint; + for (const GLVolume *v : m_volumes.volumes) { + if (! v->is_wipe_tower || v->object_idx() - 1000 != plate_id) + continue; + const BoundingBoxf3 bbox = v->transformed_convex_hull_bounding_box(); + tower_footprint = Polygon({ Point(scale_(bbox.min.x() - padding), scale_(bbox.min.y() - padding)), + Point(scale_(bbox.max.x() + padding), scale_(bbox.min.y() - padding)), + Point(scale_(bbox.max.x() + padding), scale_(bbox.max.y() + padding)), + Point(scale_(bbox.min.x() - padding), scale_(bbox.max.y() + padding)) }); + break; + } + + const CompactedTowerZone zone = compacted_wipe_tower_zone(config, tower_footprint); + if (zone.empty()) { + reset_sequential_print_clearance(); + return; + } + + // While dragging, outline every on-plate instance next to the tower ring, the way sequential print + // outlines every object. Both carry half of the clearance, so the two outlines meeting is precisely + // the moment that object goes over its limit - which is what makes the pair worth drawing at all. + // The tier is per object, so a short object gets the narrow nozzle outline rather than the wide + // body one it is not subject to; without that, a 3 mm object parked beside the tower would be drawn + // deep inside the keep-out ring while passing the check. Only the instances that already exceed + // allowed_rise also get a height limit plane. + Polygons outlines; + std::vector> height_polygons; + bool body_tier_used = false; + const BoundingBox plate_bb = plate->get_bounding_box_crd(); + for (const ModelObject *model_object : m_model->objects) { + for (size_t i = 0; i < model_object->instances.size(); ++i) { + Geometry::Transformation trafo(model_object->instances[i]->get_transformation()); + const Vec3d offset = trafo.get_offset(); + trafo.set_offset(Vec3d(offset.x(), offset.y(), 0.0)); + const Polygon inst_hull = model_object->convex_hull_2d(trafo.get_matrix()); + if (inst_hull.points.empty() || ! plate_bb.overlap(inst_hull.bounding_box())) + continue; + + // Same tiers and the same rise measured from the plate as + // Print::compacted_wipe_tower_clearance_valid(), so that the preview and the validation + // that follows it never contradict each other. + const double object_top = model_object->get_instance_max_z(i); + const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(config, zone, inst_hull, object_top); + body_tier_used = body_tier_used || compacted_tower_body_tier(clearance); + + const Polygon outline = compacted_wipe_tower_offender_outline(inst_hull, clearance.body_clearance); + outlines.emplace_back(outline); + if (object_top <= clearance.allowed_rise + EPSILON) + continue; + height_polygons.emplace_back(outline, float(clearance.allowed_rise)); + } + } + + Polygons polygons = compacted_wipe_tower_rings(zone, body_tier_used); + append(polygons, outlines); + + set_sequential_print_clearance_visible(true); + set_sequential_print_clearance_render_fill(false); + set_sequential_print_clearance_polygons(polygons, height_polygons); +} + void GLCanvas3D::update_sequential_clearance() { if (current_printer_technology() != ptFFF || (fff_print()->config().print_sequence == PrintSequence::ByLayer)) diff --git a/src/slic3r/GUI/GLCanvas3D.hpp b/src/slic3r/GUI/GLCanvas3D.hpp index c2962c3858..1ea352ac96 100644 --- a/src/slic3r/GUI/GLCanvas3D.hpp +++ b/src/slic3r/GUI/GLCanvas3D.hpp @@ -1191,6 +1191,8 @@ public: bool can_sequential_clearance_show_in_gizmo(); void update_sequential_clearance(); + // Orca: by-layer counterpart, for a prime tower compacted by "No sparse layers". + void update_compacted_wipe_tower_clearance(); const Print* fff_print() const; const SLAPrint* sla_print() const; diff --git a/src/slic3r/GUI/PartPlate.cpp b/src/slic3r/GUI/PartPlate.cpp index 893260f934..260c857f22 100644 --- a/src/slic3r/GUI/PartPlate.cpp +++ b/src/slic3r/GUI/PartPlate.cpp @@ -1053,7 +1053,13 @@ void PartPlate::render_grid(bool bottom) { void PartPlate::render_height_limit(PartPlate::HeightLimitMode mode) { - if (m_print && m_print->config().print_sequence == PrintSequence::ByObject && mode != HEIGHT_LIMIT_NONE) + // Orca: a prime tower compacted by "No sparse layers" drags the nozzle back down to the plate on + // every toolchange, so the rod and the lid limit how tall a neighbouring object may be exactly as + // they do in sequential printing. The reference lines are just as useful there. + const bool relevant_for_print_mode = m_print && (m_print->config().print_sequence == PrintSequence::ByObject || + (m_print->config().print_sequence == PrintSequence::ByLayer && + wipe_tower_sparse_layers_skipped(m_print->config()) && m_print->has_wipe_tower())); + if (relevant_for_print_mode && mode != HEIGHT_LIMIT_NONE) { // draw lower limit // ORCA: OpenGL Core Profile diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp index 6279941e13..28d3478bf2 100644 --- a/src/slic3r/GUI/Tab.cpp +++ b/src/slic3r/GUI/Tab.cpp @@ -1992,6 +1992,20 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value) // reload scene to update timelapse wipe tower if (opt_key == "timelapse_type") { + // Smooth timelapse parks the nozzle on the prime tower every layer, so it needs a tower on + // every layer. That is exactly what "No sparse layers" removes, and with both on the tower is + // planned full height and then dropped on emission. Drop "No sparse layers" and tell the user. + if (boost::any_cast(value) == (int) TimelapseType::tlSmooth && m_config->opt_bool("wipe_tower_no_sparse_layers")) { + MessageDialog dlg(wxGetApp().plater(), + _L("Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". " + "\"No sparse layers\" has been turned off."), + _L("Warning"), wxICON_WARNING | wxOK); + dlg.ShowModal(); + DynamicPrintConfig new_conf = *m_config; + new_conf.set_key_value("wipe_tower_no_sparse_layers", new ConfigOptionBool(false)); + m_config_manipulation.apply(m_config, &new_conf); + } + bool wipe_tower_enabled = m_config->option("enable_prime_tower")->value; if (!wipe_tower_enabled && boost::any_cast(value) == (int)TimelapseType::tlSmooth) { MessageDialog dlg(wxGetApp().plater(), _L("A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower\?"), @@ -2007,6 +2021,23 @@ void Tab::on_value_change(const std::string& opt_key, const boost::any& value) } } + // Mirror of the timelapse_type branch above: enabling "No sparse layers" while smooth timelapse + // is active would leave the tower on every layer anyway, so fall back to traditional timelapse. + if (opt_key == "wipe_tower_no_sparse_layers" && boost::any_cast(value)) { + auto timelapse_type = m_config->option>("timelapse_type"); + if (timelapse_type && timelapse_type->value == TimelapseType::tlSmooth) { + MessageDialog dlg(wxGetApp().plater(), + _L("\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. " + "Timelapse has been switched to traditional mode."), + _L("Warning"), wxICON_WARNING | wxOK); + dlg.ShowModal(); + DynamicPrintConfig new_conf = *m_config; + new_conf.set_key_value("timelapse_type", new ConfigOptionEnum(TimelapseType::tlTraditional)); + m_config_manipulation.apply(m_config, &new_conf); + wxGetApp().plater()->update(); + } + } + if (opt_key == "print_sequence" && m_config->opt_enum("print_sequence") == PrintSequence::ByObject) { auto printer_structure_opt = m_preset_bundle->printers.get_edited_preset().config.option>("printer_structure"); if (printer_structure_opt && printer_structure_opt->value == PrinterStructure::psI3) { @@ -5109,6 +5140,7 @@ void TabPrinter::build_fff() optgroup = page->new_optgroup(L("Extruder Clearance"), "param_extruder_clearance"); optgroup->append_single_option_line("extruder_clearance_radius", "printer_basic_information_extruder_clearance#radius"); + optgroup->append_single_option_line("extruder_clearance_dist_to_rod", "printer_basic_information_extruder_clearance"); optgroup->append_single_option_line("extruder_clearance_height_to_rod", "printer_basic_information_extruder_clearance#height-to-rod"); optgroup->append_single_option_line("extruder_clearance_height_to_lid", "printer_basic_information_extruder_clearance#height-to-lid"); diff --git a/tests/libslic3r/test_wipe_tower.cpp b/tests/libslic3r/test_wipe_tower.cpp index 2987dce9da..277e11eceb 100644 --- a/tests/libslic3r/test_wipe_tower.cpp +++ b/tests/libslic3r/test_wipe_tower.cpp @@ -6,6 +6,8 @@ #include "libslic3r/ClipperUtils.hpp" #include "libslic3r/GCode/WipeTower.hpp" #include "libslic3r/GCode/WipeTower2.hpp" +#include "libslic3r/Print.hpp" +#include "libslic3r/PrintConfig.hpp" using namespace Slic3r; using Catch::Matchers::WithinAbs; @@ -91,3 +93,197 @@ TEST_CASE("Brim width estimate matches each generator's loop quantization", "[Wi CHECK_THAT(WipeTower::estimate_brim_real_width(3.f, 0.4f, 0.2f, false), WithinAbs(7.5f * spacing, 1e-4f)); CHECK_THAT(WipeTower::estimate_brim_real_width(0.f, 0.4f, 0.2f, true), WithinAbs(0.f, 1e-6f)); } + +// --------------------------------------------------------------------------------------------- +// "No sparse layers": the compaction rule and the clearance it demands of the plate. +// --------------------------------------------------------------------------------------------- + +// A square of side mm centred on (cx, cy), in bed coordinates. +static Polygon centered_square(double cx, double cy, double side) +{ + const double h = 0.5 * side; + Polygon poly; + poly.points = {Point::new_scale(cx - h, cy - h), Point::new_scale(cx + h, cy - h), + Point::new_scale(cx + h, cy + h), Point::new_scale(cx - h, cy + h)}; + return poly; +} + +static WipeTower::ToolChangeResult make_tcr(int initial_tool, int new_tool, float layer_height) +{ + WipeTower::ToolChangeResult tcr{}; + tcr.initial_tool = initial_tool; + tcr.new_tool = new_tool; + tcr.layer_height = layer_height; + return tcr; +} + +// A 20 mm square tower at the bed origin, no spiral z-hop, so the keep-out zone is the bare +// footprint and every distance below is one the test sets. +static PrintConfig clearance_config() +{ + PrintConfig cfg; + cfg.extruder_clearance_radius.value = 40.; + cfg.extruder_clearance_dist_to_rod.value = 20.; + cfg.extruder_clearance_height_to_rod.value = 25.; + cfg.extruder_clearance_height_to_lid.value = 120.; + cfg.nozzle_height.value = 5.; + cfg.nozzle_diameter.values = {0.4}; + cfg.z_hop.values = {0.}; + cfg.travel_slope.values = {3.}; + return cfg; +} + +TEST_CASE("Sparse layers are skipped only when nothing else needs a tower on every layer", "[WipeTower][NoSparseLayers]") { + PrintConfig cfg; + cfg.timelapse_type.value = TimelapseType::tlTraditional; + cfg.enable_wrapping_detection.value = false; + + cfg.wipe_tower_no_sparse_layers.value = false; + CHECK_FALSE(wipe_tower_sparse_layers_skipped(cfg)); + cfg.wipe_tower_no_sparse_layers.value = true; + CHECK(wipe_tower_sparse_layers_skipped(cfg)); + + // Both park the nozzle on the tower every layer, so no layer is ever dropped and the option + // must read as off everywhere rather than compact in one place and not another. + cfg.timelapse_type.value = TimelapseType::tlSmooth; + CHECK_FALSE(wipe_tower_sparse_layers_skipped(cfg)); + cfg.timelapse_type.value = TimelapseType::tlTraditional; + cfg.enable_wrapping_detection.value = true; + CHECK_FALSE(wipe_tower_sparse_layers_skipped(cfg)); +} + +TEST_CASE("A planned layer is sparse only when its single tool change keeps the filament", "[WipeTower][NoSparseLayers]") { + CHECK(wipe_tower_layer_is_sparse({make_tcr(1, 1, 0.2f)})); + CHECK_FALSE(wipe_tower_layer_is_sparse({make_tcr(0, 1, 0.2f)})); + // A second entry means the layer carries real work whatever the tools are. + CHECK_FALSE(wipe_tower_layer_is_sparse({make_tcr(1, 1, 0.2f), make_tcr(1, 1, 0.2f)})); + CHECK_FALSE(wipe_tower_layer_is_sparse({})); +} + +TEST_CASE("The compacted tower falls one layer height behind the object per sparse layer", "[WipeTower][NoSparseLayers]") { + // Five 0.2 mm layers off a 0.1 mm z offset, the middle two sparse. The object reaches + // 0.1 + 5 * 0.2 = 1.1; the tower only grows on the three printed layers, so it ends at + // 0.1 + 3 * 0.2 = 0.7 and a sparse layer carries the previous value rather than its own. + const std::vector> tool_changes{ + {make_tcr(0, 1, 0.2f)}, {make_tcr(1, 1, 0.2f)}, {make_tcr(1, 1, 0.2f)}, + {make_tcr(1, 0, 0.2f)}, {make_tcr(0, 1, 0.2f)}}; + + const std::vector tower_z = compute_compacted_wipe_tower_z(tool_changes, 0.1f); + REQUIRE(tower_z.size() == tool_changes.size()); + CHECK_THAT(tower_z[0], WithinAbs(0.3f, 1e-5f)); + CHECK_THAT(tower_z[1], WithinAbs(0.3f, 1e-5f)); + CHECK_THAT(tower_z[2], WithinAbs(0.3f, 1e-5f)); + CHECK_THAT(tower_z[3], WithinAbs(0.5f, 1e-5f)); + CHECK_THAT(tower_z[4], WithinAbs(0.7f, 1e-5f)); + CHECK_THAT(1.1f - tower_z.back(), WithinAbs(2 * 0.2f, 1e-5f)); + + // Without a base the tower starts at the bed, and an empty layer carries over like a sparse one. + const std::vector no_offset = compute_compacted_wipe_tower_z({{make_tcr(0, 1, 0.2f)}, {}}, 0.f); + CHECK_THAT(no_offset[0], WithinAbs(0.2f, 1e-5f)); + CHECK_THAT(no_offset[1], WithinAbs(0.2f, 1e-5f)); +} + +TEST_CASE("The tower keep-out zone grows by the spiral z-hop envelope", "[WipeTower][NoSparseLayers]") { + PrintConfig cfg = clearance_config(); + const Polygon footprint = centered_square(0., 0., 20.); + + // No lift, no envelope: the zone works on the bare footprint. + CHECK_THAT(unscaled(compacted_wipe_tower_zone(cfg, footprint).hull.bounding_box().max.x()), WithinAbs(10., 1e-6)); + + // A spiral lift leaves the outline at low z, so it counts as tower. The circle reaches + // 2 * lift / (2*pi*atan(slope)) past the outline, matching GCodeWriter: 2*2/(2*pi*atan(3)) = 0.51 mm. + cfg.z_hop.values = {2.}; + const CompactedTowerZone lifted = compacted_wipe_tower_zone(cfg, footprint); + CHECK_THAT(unscaled(lifted.hull.bounding_box().max.x()), WithinAbs(10.51, 0.02)); + CHECK_THAT(unscaled(lifted.hull.bounding_box().min.y()), WithinAbs(-10.51, 0.02)); + CHECK(diff(Polygons{footprint}, Polygons{lifted.hull}).empty()); + + // z_hop is capped at 5 mm by the option, so a taller lift cannot widen the zone further. + cfg.z_hop.values = {10.}; + const double capped = unscaled(compacted_wipe_tower_zone(cfg, footprint).hull.bounding_box().max.x()); + CHECK_THAT(capped, WithinAbs(10. + 2. * 5. / (2. * M_PI * std::atan(3.)), 0.02)); + + // The rod sweeps the whole X axis, so its band is the tower's y span plus half the rod offset. + CHECK_THAT(unscaled(lifted.bbox_rod.max.y()), WithinAbs(10.51 + 10., 0.02)); +} + +TEST_CASE("An object beside a compacted tower is limited by the nearest part of the toolhead", "[WipeTower][NoSparseLayers]") { + const PrintConfig cfg = clearance_config(); + const CompactedTowerZone zone = compacted_wipe_tower_zone(cfg, centered_square(0., 0., 20.)); + + // Each side carries half its clearance less 0.1 mm slack, so the two outlines meet when the + // objects are a full clearance apart: 2 * (4 - 0.2) / 2 = 3.8 mm for the bare nozzle cone, + // 2 * (40 - 0.2) / 2 = 39.8 mm for the head body. A 10 mm object at x leaves a gap of x - 15. + const double tall = 50., shortish = 3.; + + // Gap 1 mm, inside the nozzle cone: the object may not rise above the tower at all. + const CompactedTowerClearance touching = compacted_wipe_tower_clearance(cfg, zone, centered_square(16., 0., 10.), tall); + CHECK_THAT(touching.allowed_rise, WithinAbs(0., 1e-9)); + + // Gap 10 mm: clear of the cone but inside the head body, which starts at nozzle_height. + const CompactedTowerClearance near_body = compacted_wipe_tower_clearance(cfg, zone, centered_square(25., 0., 10.), tall); + CHECK(near_body.near_body); + CHECK_THAT(near_body.allowed_rise, WithinAbs(5., 1e-9)); + CHECK_THAT(near_body.body_clearance, WithinAbs(40., 1e-9)); + + // The same spot, but an object that never rises past the cone. The body sits above the cone, so + // it cannot reach this object however close it stands, and only the narrow tier applies. + const CompactedTowerClearance low = compacted_wipe_tower_clearance(cfg, zone, centered_square(25., 0., 10.), shortish); + CHECK_FALSE(low.near_body); + CHECK_THAT(low.body_clearance, WithinAbs(4., 1e-9)); + CHECK_THAT(low.allowed_rise, WithinAbs(25., 1e-9)); + + // Gap 55 mm, clear of the head entirely: the rod is the obstacle, since the object shares the + // tower's y band and the rod spans the whole x axis however far apart the two stand. + const CompactedTowerClearance far_in_band = compacted_wipe_tower_clearance(cfg, zone, centered_square(70., 0., 10.), tall); + CHECK_FALSE(far_in_band.near_body); + CHECK_THAT(far_in_band.far_clearance, WithinAbs(25., 1e-9)); + CHECK_THAT(far_in_band.allowed_rise, WithinAbs(25., 1e-9)); + + // Out of the band the rod passes over it and only the lid is left. + const CompactedTowerClearance out_of_band = compacted_wipe_tower_clearance(cfg, zone, centered_square(70., 60., 10.), tall); + CHECK_THAT(out_of_band.allowed_rise, WithinAbs(120., 1e-9)); +} + +TEST_CASE("The ring drawn around the tower meets the outline drawn around an offender", "[WipeTower][NoSparseLayers]") { + const PrintConfig cfg = clearance_config(); + const CompactedTowerZone zone = compacted_wipe_tower_zone(cfg, centered_square(0., 0., 20.)); + + // What the plater draws has to be what the check tested, otherwise a user moves an object until + // the outlines part and slicing still refuses the plate. Both halves of the 3.8 mm nozzle + // clearance: at a 3 mm gap the rings overlap and the rise limit is zero, at 5 mm neither holds. + for (const auto &c : {std::make_pair(18., true), std::make_pair(20., false)}) { + DYNAMIC_SECTION("object at x = " << c.first) { + const Polygon hull = centered_square(c.first, 0., 10.); + const CompactedTowerClearance clearance = compacted_wipe_tower_clearance(cfg, zone, hull, 3.); + const Polygons rings = compacted_wipe_tower_rings(zone, compacted_tower_body_tier(clearance)); + const Polygon outline = compacted_wipe_tower_offender_outline(hull, clearance.body_clearance); + const bool outlines_meet = ! intersection(rings, Polygons{outline}).empty(); + const bool rise_denied = clearance.allowed_rise < EPSILON; + CHECK(outlines_meet == c.second); + CHECK(rise_denied == c.second); + } + } +} + +TEST_CASE("Only the keep-out ring an object is measured against is drawn", "[WipeTower][NoSparseLayers]") { + const PrintConfig cfg = clearance_config(); + const CompactedTowerZone zone = compacted_wipe_tower_zone(cfg, centered_square(0., 0., 20.)); + + // Drawing the wide ring when no object is judged on it would show a keep-out zone the check can + // never trip, so it is added only once some object reaches past the nozzle cone. + CHECK(compacted_wipe_tower_rings(zone, false).size() == zone.grown_nozzle.size()); + CHECK(compacted_wipe_tower_rings(zone, true).size() == zone.grown_nozzle.size() + zone.grown_body.size()); + CHECK_THAT(unscaled(get_extents(zone.grown_nozzle).max.x()), WithinAbs(10. + 0.5 * (4. - 0.2), 0.02)); + CHECK_THAT(unscaled(get_extents(zone.grown_body).max.x()), WithinAbs(10. + 0.5 * (40. - 0.2), 0.02)); +} + +TEST_CASE("Footprint padding covers the brim and the extrusion half width on each side", "[WipeTower][NoSparseLayers]") { + // A nominal outline hulls extrusion centre lines and is re-centred once the real wall is known, + // so a line width per side on top of the brim is what keeps an estimate enclosing the real tower. + const PrintConfig cfg = clearance_config(); + CHECK_THAT(compacted_tower_footprint_padding(cfg, 2.), WithinAbs(2. + 2. * 0.4, 1e-9)); + CHECK_THAT(compacted_tower_footprint_padding(cfg, 0.), WithinAbs(2. * 0.4, 1e-9)); + // Callers whose outline already carries the brim pass zero, and a negative one cannot shrink it. + CHECK_THAT(compacted_tower_footprint_padding(cfg, -5.), WithinAbs(2. * 0.4, 1e-9)); +} From 59e40a2c2eab87543ca55be4c035a91be29d00d9 Mon Sep 17 00:00:00 2001 From: Ian Bassi Date: Thu, 17 Sep 2026 09:14:20 -0300 Subject: [PATCH 3/8] Print unsupported walls last (#15411) --- src/libslic3r/ExtrusionEntity.hpp | 4 + src/libslic3r/GCode.cpp | 22 ++- src/libslic3r/GCode.hpp | 2 +- src/libslic3r/Layer.cpp | 1 + src/libslic3r/PerimeterGenerator.cpp | 71 ++++++++ src/libslic3r/Preset.cpp | 1 + src/libslic3r/PrintConfig.cpp | 10 ++ src/libslic3r/PrintConfig.hpp | 1 + src/libslic3r/PrintObject.cpp | 1 + src/slic3r/GUI/ConfigManipulation.cpp | 1 + src/slic3r/GUI/Tab.cpp | 1 + tests/fff_print/test_perimeters.cpp | 240 ++++++++++++++++++++++++++ 12 files changed, 353 insertions(+), 2 deletions(-) diff --git a/src/libslic3r/ExtrusionEntity.hpp b/src/libslic3r/ExtrusionEntity.hpp index e8348b3bd5..de80247bce 100644 --- a/src/libslic3r/ExtrusionEntity.hpp +++ b/src/libslic3r/ExtrusionEntity.hpp @@ -454,6 +454,10 @@ class ExtrusionLoop : public ExtrusionEntity { public: ExtrusionPaths paths; + // ORCA: Set on a loop extruded entirely in mid air and out of reach of the layer below: it has + // nothing to lean on until this layer is bridged, so the G-code writer holds it back until the + // infill is down. See defer_unsupported_loops() in PerimeterGenerator.cpp. + bool print_after_infill = false; ExtrusionLoop(ExtrusionLoopRole role = elrDefault) : m_loop_role(role) {} ExtrusionLoop(const ExtrusionPaths &paths, ExtrusionLoopRole role = elrDefault) : paths(paths), m_loop_role(role) {} diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index 01457d9344..81fc81b488 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -6603,6 +6603,8 @@ LayerResult GCode::process_layer( } // Then print infill gcode += this->extrude_infill(print, by_region_specific, false); + // Then the walls left hanging in mid air, now that the infill can anchor them + gcode += this->extrude_perimeters(print, by_region_specific, first_layer, false, true); // Then print perimeters of regions that has is_infill_first == true gcode += this->extrude_perimeters(print, by_region_specific, first_layer, true); } @@ -6898,6 +6900,7 @@ LayerResult GCode::process_layer( has_insert_timelapse_gcode = true; } gcode += this->extrude_infill(print, by_region_specific, false); + gcode += this->extrude_perimeters(print, by_region_specific, first_layer, false, true); gcode += this->extrude_perimeters(print, by_region_specific, first_layer, true); // ironing gcode += this->extrude_infill(print, by_region_specific, true); @@ -7638,7 +7641,7 @@ std::string GCode::extrude_path(const ExtrusionPath& path, const std::string& de } // Extrude perimeters: Decide where to put seams (hide or align seams). -std::string GCode::extrude_perimeters(const Print &print, const std::vector &by_region, bool is_first_layer, bool is_infill_first) +std::string GCode::extrude_perimeters(const Print &print, const std::vector &by_region, bool is_first_layer, bool is_infill_first, bool unsupported_loops_only) { std::string gcode; for (const ObjectByExtruder::Island::Region ®ion : by_region) @@ -7657,7 +7660,24 @@ std::string GCode::extrude_perimeters(const Print &print, const std::vector 0. && scale_(FILAMENT_CONFIG(wipe_distance)) > SCALED_EPSILON) wipe_support.emplace(); + + // ORCA: loops flagged as extruded in mid air, out of reach of the layer below, are held back + // for a second pass after the infill that anchors them. Infill already precedes infill first walls. + const bool defer_unsupported = !is_infill_first; + auto waits_for_infill = [](const ExtrusionEntity *ee) { + return ee->is_loop() && static_cast(ee)->print_after_infill; + }; + + // The deferred pass runs after the infill, so the loops the first pass emitted are + // already down and belong in the prefix an inward wipe may land on. + if (wipe_support && defer_unsupported && unsupported_loops_only) + for (const ExtrusionEntity* ee : region.perimeters) + if (!waits_for_infill(ee)) + wipe_support->append(*ee); + for (const ExtrusionEntity* ee : region.perimeters) { + if (defer_unsupported && waits_for_infill(ee) != unsupported_loops_only) + continue; gcode += this->extrude_entity(*ee, "perimeter", -1., region.perimeters, wipe_support ? &*wipe_support : nullptr); if (wipe_support) diff --git a/src/libslic3r/GCode.hpp b/src/libslic3r/GCode.hpp index 3933fd4e56..8cf4aa03fb 100644 --- a/src/libslic3r/GCode.hpp +++ b/src/libslic3r/GCode.hpp @@ -534,7 +534,7 @@ private: // For sequential print, the instance of the object to be printing has to be defined. const size_t single_object_instance_idx); - std::string extrude_perimeters(const Print& print, const std::vector& by_region, bool is_first_layer, bool is_infill_first); + std::string extrude_perimeters(const Print& print, const std::vector& by_region, bool is_first_layer, bool is_infill_first, bool unsupported_loops_only = false); std::string extrude_infill(const Print& print, const std::vector& by_region, bool ironing); std::string extrude_support(const ExtrusionEntityCollection& support_fills, const ExtrusionRole support_extrusion_role); diff --git a/src/libslic3r/Layer.cpp b/src/libslic3r/Layer.cpp index b7ec08f856..7bdef5a4ff 100644 --- a/src/libslic3r/Layer.cpp +++ b/src/libslic3r/Layer.cpp @@ -153,6 +153,7 @@ bool Layer::is_perimeter_compatible(const Print& print, const PrintRegion& a, co && config.gap_infill_speed.get_at(print.get_extruder_id(config.outer_wall_filament_id)) == other_config.gap_infill_speed.get_at(print.get_extruder_id(config.outer_wall_filament_id)) && config.filter_out_gap_fill.value == other_config.filter_out_gap_fill.value && config.detect_overhang_wall == other_config.detect_overhang_wall + && config.unsupported_wall_last == other_config.unsupported_wall_last && config.overhang_reverse == other_config.overhang_reverse && config.overhang_reverse_threshold == other_config.overhang_reverse_threshold && config.wall_direction == other_config.wall_direction diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp index a6b38889a5..9f6ec856ba 100644 --- a/src/libslic3r/PerimeterGenerator.cpp +++ b/src/libslic3r/PerimeterGenerator.cpp @@ -550,6 +550,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator& p if (!paths.empty()) { if (extrusion->is_closed) { ExtrusionLoop extrusion_loop(std::move(paths), pg_extrusion.is_contour ? elrDefault : elrHole); + extrusion_loop.inset_idx = extrusion->inset_idx; if ((perimeter_generator.config->wall_direction == WallDirection::CounterClockwise) == (pg_extrusion.is_contour || pg_extrusions.size() == 2)) extrusion_loop.make_counter_clockwise(); @@ -1318,6 +1319,73 @@ static void reorient_perimeters(ExtrusionEntityCollection &entities, bool steep_ } } +// A loop made of nothing but overhang paths lies entirely off the lower layer. +static bool is_unsupported_loop(const ExtrusionEntity *entity) +{ + if (!entity->is_loop()) + return false; + const ExtrusionPaths &paths = static_cast(entity)->paths; + return !paths.empty() && std::all_of(paths.begin(), paths.end(), + [](const ExtrusionPath &path) { return path.role() == erOverhangPerimeter; }); +} + +// ORCA: A wall loop with nothing under it has nothing to lean on, so whatever the configured wall +// sequence it is extruded after the loops that anchor it, innermost first. A loop that runs alongside +// an anchored one belongs to the same wall stack and keeps its place ahead of the infill, which needs +// it as an anchor; one that touches nothing has only that infill to rest on, so it is flagged for the +// G-code writer to hold it back until the infill is down. +static void defer_unsupported_loops(const PerimeterGenerator &perimeter_generator, ExtrusionEntityCollection &entities) +{ + if (!perimeter_generator.config->unsupported_wall_last) + return; + + ExtrusionEntitiesPtr &src = entities.entities; + auto first_deferred = std::stable_partition(src.begin(), src.end(), + [](const ExtrusionEntity *entity) { return !is_unsupported_loop(entity); }); + if (first_deferred == src.end()) + return; + + std::stable_sort(first_deferred, src.end(), + [](const ExtrusionEntity *lhs, const ExtrusionEntity *rhs) { return lhs->inset_idx > rhs->inset_idx; }); + + auto collect_lines = [](const ExtrusionEntity *entity, Lines &out) { + Polylines polylines; + entity->collect_polylines(polylines); + append(out, to_lines(polylines)); + }; + + Lines anchored; + for (auto it = src.begin(); it != first_deferred; ++it) + collect_lines(*it, anchored); + + std::vector unattached; + for (auto it = first_deferred; it != src.end(); ++it) + unattached.emplace_back(static_cast(*it)); + + // A loop leaning on a loop that is itself anchored is anchored as well, so spread outwards from + // the anchored loops until no unsupported loop is left touching what was reached. + const double touch_distance = 1.5 * std::max(perimeter_generator.ext_perimeter_flow.scaled_spacing(), + perimeter_generator.perimeter_flow.scaled_spacing()); + while (!anchored.empty()) { + AABBTreeLines::LinesDistancer distancer{std::move(anchored)}; + anchored.clear(); + for (ExtrusionLoop *&loop : unattached) { + if (loop == nullptr) + continue; + const Points points = loop->as_polyline().points; + if (std::any_of(points.begin(), points.end(), + [&distancer, touch_distance](const Point &point) { return distancer.distance_from_lines(point) < touch_distance; })) { + collect_lines(loop, anchored); + loop = nullptr; + } + } + } + + for (ExtrusionLoop *loop : unattached) + if (loop != nullptr) + loop->print_after_infill = true; +} + void PerimeterGenerator::process_classic() { group_region_by_fuzzify(*this); @@ -1804,6 +1872,8 @@ void PerimeterGenerator::process_classic() } } + defer_unsupported_loops(*this, entities); + // append perimeters for this slice as a collection if (! entities.empty()) this->loops->append(entities); @@ -2742,6 +2812,7 @@ void PerimeterGenerator::process_arachne() reorient_perimeters(extrusion_coll, steep_overhang_contour, steep_overhang_hole, this->config->overhang_reverse_internal_only); } + defer_unsupported_loops(*this, extrusion_coll); this->loops->append(extrusion_coll); } diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp index b2b5d9277b..1002f5be89 100644 --- a/src/libslic3r/Preset.cpp +++ b/src/libslic3r/Preset.cpp @@ -1058,6 +1058,7 @@ static std::vector s_Preset_print_options{ "reduce_crossing_wall", "detect_thin_wall", "detect_overhang_wall", + "unsupported_wall_last", "overhang_reverse", "overhang_reverse_threshold", "overhang_reverse_internal_only", diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index f187e6ab82..ea39cbeb5b 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -5547,6 +5547,16 @@ void PrintConfigDef::init_fff_params() def->mode = comAdvanced; def->set_default_value(new ConfigOptionBool(true)); + def = this->add("unsupported_wall_last", coBool); + def->label = L("Print unsupported walls last"); + def->category = L("Quality"); + def->tooltip = L("Wall loops that lie entirely in mid air are printed once something can hold them:\n" + "they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" + "A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running " + "alongside a supported wall keeps its place before the infill, which needs it as an anchor."); + def->mode = comAdvanced; + def->set_default_value(new ConfigOptionBool(false)); + def = this->add("outer_wall_filament_id", coInt); def->gui_type = ConfigOptionDef::GUIType::i_enum_open; def->label = L("Outer walls"); diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index d161863a9c..727246ef73 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -1353,6 +1353,7 @@ PRINT_CONFIG_CLASS_DEFINE( ((ConfigOptionFloatsNullable, filament_ironing_speed)) // Detect bridging perimeters ((ConfigOptionBool, detect_overhang_wall)) + ((ConfigOptionBool, unsupported_wall_last)) ((ConfigOptionInt, outer_wall_filament_id)) ((ConfigOptionInt, inner_wall_filament_id)) ((ConfigOptionFloatOrPercent, inner_wall_line_width)) diff --git a/src/libslic3r/PrintObject.cpp b/src/libslic3r/PrintObject.cpp index bb2a355daa..3b7e889472 100644 --- a/src/libslic3r/PrintObject.cpp +++ b/src/libslic3r/PrintObject.cpp @@ -1501,6 +1501,7 @@ bool PrintObject::invalidate_state_by_config_options( || opt_key == "fuzzy_skin_octaves" || opt_key == "fuzzy_skin_persistence" || opt_key == "detect_overhang_wall" + || opt_key == "unsupported_wall_last" || opt_key == "overhang_reverse" || opt_key == "overhang_reverse_internal_only" || opt_key == "overhang_reverse_threshold" diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp index 0244710298..f40c71ec4a 100644 --- a/src/slic3r/GUI/ConfigManipulation.cpp +++ b/src/slic3r/GUI/ConfigManipulation.cpp @@ -1134,6 +1134,7 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in bool has_detect_overhang_wall = config->opt_bool("detect_overhang_wall"); bool has_overhang_reverse = config->opt_bool("overhang_reverse"); bool allow_overhang_reverse = !has_spiral_vase; + toggle_line("unsupported_wall_last", has_detect_overhang_wall); toggle_line("overhang_reverse", allow_overhang_reverse); toggle_line("overhang_reverse_internal_only", allow_overhang_reverse && has_overhang_reverse); bool has_overhang_reverse_internal_only = config->opt_bool("overhang_reverse_internal_only"); diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp index 28d3478bf2..021724ad96 100644 --- a/src/slic3r/GUI/Tab.cpp +++ b/src/slic3r/GUI/Tab.cpp @@ -2794,6 +2794,7 @@ void TabPrint::build() optgroup = page->new_optgroup(L("Overhangs"), L"param_overhang"); optgroup->append_single_option_line("detect_overhang_wall", "quality_settings_overhangs#detect-overhang-wall"); + optgroup->append_single_option_line("unsupported_wall_last", "quality_settings_overhangs#unsupported-wall-last"); optgroup->append_single_option_line("make_overhang_printable", "quality_settings_overhangs#make-overhang-printable"); optgroup->append_single_option_line("make_overhang_printable_angle", "quality_settings_overhangs#maximum-angle"); optgroup->append_single_option_line("make_overhang_printable_hole_size", "quality_settings_overhangs#hole-area"); diff --git a/tests/fff_print/test_perimeters.cpp b/tests/fff_print/test_perimeters.cpp index a98877ad2f..7067c60c61 100644 --- a/tests/fff_print/test_perimeters.cpp +++ b/tests/fff_print/test_perimeters.cpp @@ -4,9 +4,14 @@ #include "libslic3r/ExtrusionEntityCollection.hpp" #include "libslic3r/Layer.hpp" #include "libslic3r/Print.hpp" +#include "libslic3r/GCodeReader.hpp" +#include "libslic3r/Model.hpp" +#include "libslic3r/TriangleMesh.hpp" #include #include +#include +#include #include #include "test_helpers.hpp" @@ -255,3 +260,238 @@ TEST_CASE("Only one wall on the first layer needs a bottom shell", "[Perimeters] // No bottom shell: the option is inert, down to the same walls an unchecked box gives. CHECK_THAT(one_wall_no_shell, Catch::Matchers::WithinAbs(plain_no_shell, 1.0)); } + +namespace { + +// The layer that closes the cavity of box_over_cavity(), the first one printed over air. +const double cavity_ceiling_z = 6.2; + +// A cone standing on its tip, flaring by 5mm of radius per mm of height: at a layer height of 0.2 every +// wall of a layer lands a full millimetre outside the one below, entirely off the layer below but right +// alongside the walls printed with it. +TriangleMesh flared_cone() +{ + TriangleMesh cone = make_cone(20., 4.); + cone.mirror(Z); + cone.translate(0., 0., 4.); + return cone; +} + +// A 30mm box holding a 20mm cavity from z=2 to z=6, with a 4mm hole punched down through the ceiling +// of that cavity. The layer at cavity_ceiling_z bridges the cavity, and the walls of the hole sit in +// the middle of that bridge, 15mm clear of anything the layer below supports. +Print &box_over_cavity(Print &print, Model &model, const DynamicPrintConfig &config) +{ + ModelObject *object = model.add_object(); + object->name = "box_over_cavity.stl"; + object->add_volume(make_cube(30., 30., 8.), ModelVolumeType::MODEL_PART, false); + TriangleMesh cavity = make_cube(20., 20., 4.); + cavity.translate(5.f, 5.f, 2.f); + object->add_volume(std::move(cavity), ModelVolumeType::NEGATIVE_VOLUME, false); + TriangleMesh hole = make_cube(4., 4., 6.); + hole.translate(13.f, 13.f, 5.f); + object->add_volume(std::move(hole), ModelVolumeType::NEGATIVE_VOLUME, false); + object->add_instance(); + object->ensure_on_bed(); + + print.auto_assign_extruders(object); + print.apply(model, config); + print.validate(); + print.set_status_silent(); + return print; +} + +// Every setting the assertions below depend on, so none of them rests on a default. +DynamicPrintConfig unsupported_walls_config(const char *wall_generator, bool unsupported_wall_last) +{ + DynamicPrintConfig config = DynamicPrintConfig::full_print_config(); + config.set_deserialize_strict({ + { "wall_generator", wall_generator }, + { "layer_height", 0.2 }, + { "initial_layer_print_height", 0.2 }, + { "wall_loops", 3 }, + { "detect_overhang_wall", true }, + // Outer wall first, so an unsupported loop only ends up last if the feature puts it there. + { "wall_sequence", "outer wall/inner wall" }, + { "is_infill_first", false }, + { "sparse_infill_density", "15%" }, + { "unsupported_wall_last", unsupported_wall_last }, + { "gcode_comments", true }, + }); + return config; +} + +// A loop extruded entirely in mid air: every one of its paths is an overhang. +bool unsupported_loop(const ExtrusionEntity *entity) +{ + if (! entity->is_loop()) + return false; + const ExtrusionPaths &paths = static_cast(entity)->paths; + return ! paths.empty() && std::all_of(paths.begin(), paths.end(), + [](const ExtrusionPath &path) { return path.role() == erOverhangPerimeter; }); +} + +// The loops of every wall island of the print, island by island, in extrusion order. +std::vector> wall_islands(const Print &print) +{ + std::vector> islands; + for (const Layer *layer : print.objects().front()->layers()) + for (const LayerRegion *region : layer->regions()) + for (const ExtrusionEntity *island : region->perimeters.entities) { + std::vector loops; + for (const ExtrusionEntity *entity : static_cast(island)->entities) + if (entity->is_loop()) + loops.push_back(static_cast(entity)); + islands.push_back(std::move(loops)); + } + return islands; +} + +// Islands where a loop that is anchored is extruded after one that is not. +int islands_with_a_supported_loop_last(const Print &print) +{ + int count = 0; + for (const std::vector &loops : wall_islands(print)) { + bool seen_unsupported = false; + for (const ExtrusionLoop *loop : loops) { + if (unsupported_loop(loop)) + seen_unsupported = true; + else if (seen_unsupported) { + ++ count; + break; + } + } + } + return count; +} + +// The unsupported loops of the print, and those of them held back for the infill. +std::vector unsupported_loops(const Print &print, double print_z = -1.) +{ + std::vector loops; + for (const Layer *layer : print.objects().front()->layers()) { + if (print_z >= 0. && std::abs(layer->print_z - print_z) > EPSILON) + continue; + for (const LayerRegion *region : layer->regions()) + for (const ExtrusionEntity *island : region->perimeters.entities) + for (const ExtrusionEntity *entity : static_cast(island)->entities) + if (unsupported_loop(entity)) + loops.push_back(static_cast(entity)); + } + return loops; +} + +int loops_held_back_for_infill(const std::vector &loops) +{ + return int(std::count_if(loops.begin(), loops.end(), [](const ExtrusionLoop *loop) { return loop->print_after_infill; })); +} + +// The G-code emitted at `print_z`, so the order of one layer can be read on its own. +std::string layer_gcode(const std::string &gcode, double print_z) +{ + std::string out; + GCodeReader reader; + reader.parse_buffer(gcode, [&out, print_z](GCodeReader &self, const GCodeReader::GCodeLine &line) { + if (std::abs(self.z() - print_z) < EPSILON) + out += line.raw() + "\n"; + }); + return out; +} + +} // namespace + +// Whatever the wall order asks for, a loop with nothing under it cannot be extruded before the loops it +// leans on. The flared cone gives every layer an outer wall that lands completely off the one below, and +// the outer wall first sequence would otherwise put it down before any of them. +TEST_CASE("Unsupported wall loops are extruded after the walls that anchor them", "[Perimeters]") +{ + const char *wall_generator = GENERATE("classic", "arachne"); + CAPTURE(wall_generator); + + auto slice_cone = [wall_generator](bool unsupported_wall_last, Print &print) { + init_and_process_print({ flared_cone() }, print, unsupported_walls_config(wall_generator, unsupported_wall_last)); + REQUIRE_FALSE(print.objects().empty()); + }; + + Print on; + slice_cone(true, on); + // Without unsupported loops to reorder the rest of the test would pass on an empty print. + REQUIRE(unsupported_loops(on).size() > 0); + CHECK(islands_with_a_supported_loop_last(on) == 0); + + SECTION("the held back loops run innermost first") { + for (const std::vector &loops : wall_islands(on)) { + int previous_inset = std::numeric_limits::max(); + for (const ExtrusionLoop *loop : loops) + if (unsupported_loop(loop)) { + CHECK(loop->inset_idx <= previous_inset); + previous_inset = loop->inset_idx; + } + } + } + + SECTION("switched off, the configured wall order is left alone") { + Print off; + slice_cone(false, off); + REQUIRE(unsupported_loops(off).size() == unsupported_loops(on).size()); + // Outer wall first puts the unsupported outer wall ahead of the walls behind it. + CHECK(islands_with_a_supported_loop_last(off) > 0); + } +} + +// A loop the walls cannot reach is a different case: only the bridges of its own layer will ever hold it, +// so it has to wait for them - while a loop that runs alongside a wall keeps its place, because the +// bridges anchor on it instead. +TEST_CASE("A wall loop out of reach of the layer below waits for the infill", "[Perimeters]") +{ + const char *wall_generator = GENERATE("classic", "arachne"); + CAPTURE(wall_generator); + + Print print; + Model model; + box_over_cavity(print, model, unsupported_walls_config(wall_generator, true)); + print.process(); + + const std::vector hole_loops = unsupported_loops(print, cavity_ceiling_z); + REQUIRE(hole_loops.size() > 0); + CHECK(loops_held_back_for_infill(hole_loops) == int(hole_loops.size())); + + SECTION("a loop alongside a supported wall is not held back") { + Print cone; + init_and_process_print({ flared_cone() }, cone, unsupported_walls_config(wall_generator, true)); + const std::vector loops = unsupported_loops(cone); + REQUIRE(loops.size() > 0); + CHECK(loops_held_back_for_infill(loops) == 0); + } + + SECTION("switched off, no loop is held back") { + Print off; + Model off_model; + box_over_cavity(off, off_model, unsupported_walls_config(wall_generator, false)); + off.process(); + const std::vector loops = unsupported_loops(off, cavity_ceiling_z); + REQUIRE(loops.size() == hole_loops.size()); + CHECK(loops_held_back_for_infill(loops) == 0); + } +} + +// The held back loops reach the G-code in a second pass, after the infill of their layer: on the layer +// that closes the cavity the walls of the hole are extruded once the bridge is down, so the layer emits +// perimeters, then infill, then the perimeters that were waiting for it. +TEST_CASE("Loops waiting for the infill are extruded after it", "[Perimeters]") +{ + const char *wall_generator = GENERATE("classic", "arachne"); + CAPTURE(wall_generator); + + auto ceiling_roles = [wall_generator](bool unsupported_wall_last) { + Print print; + Model model; + box_over_cavity(print, model, unsupported_walls_config(wall_generator, unsupported_wall_last)); + const std::string layer = layer_gcode(gcode(print), cavity_ceiling_z); + REQUIRE_FALSE(layer.empty()); + return role_sequence(layer, { "perimeter", "infill" }); + }; + + CHECK(ceiling_roles(true) == std::vector{ "perimeter", "infill", "perimeter" }); + CHECK(ceiling_roles(false) == std::vector{ "perimeter", "infill" }); +} From 7065fa9eae98f0dc5c167103fcaa53465e9492a3 Mon Sep 17 00:00:00 2001 From: Ian Bassi Date: Thu, 17 Sep 2026 09:54:42 -0300 Subject: [PATCH 4/8] Fix extruder clearance help link anchor (#15738) --- src/slic3r/GUI/Tab.cpp | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp index 021724ad96..08ec94393d 100644 --- a/src/slic3r/GUI/Tab.cpp +++ b/src/slic3r/GUI/Tab.cpp @@ -5141,7 +5141,7 @@ void TabPrinter::build_fff() optgroup = page->new_optgroup(L("Extruder Clearance"), "param_extruder_clearance"); optgroup->append_single_option_line("extruder_clearance_radius", "printer_basic_information_extruder_clearance#radius"); - optgroup->append_single_option_line("extruder_clearance_dist_to_rod", "printer_basic_information_extruder_clearance"); + optgroup->append_single_option_line("extruder_clearance_dist_to_rod", "printer_basic_information_extruder_clearance#distance-to-rod"); optgroup->append_single_option_line("extruder_clearance_height_to_rod", "printer_basic_information_extruder_clearance#height-to-rod"); optgroup->append_single_option_line("extruder_clearance_height_to_lid", "printer_basic_information_extruder_clearance#height-to-lid"); From 60b4a6185442dc1fa1a6120b0e4eba387aed21ca Mon Sep 17 00:00:00 2001 From: Valerii Bokhan <80919135+valerii-bokhan@users.noreply.github.com> Date: Thu, 17 Sep 2026 15:56:17 +0200 Subject: [PATCH 5/8] Fix: Show indexed coFloatsOrPercents options in unsaved changes dialog (#15472) --- src/slic3r/GUI/ConfigValueFormatter.cpp | 11 +++++ src/slic3r/GUI/Search.cpp | 50 +++++++++++++++-------- src/slic3r/GUI/UnsavedChangesDialog.cpp | 54 +++++++++++++++++-------- tests/libslic3r/test_preset_diff.cpp | 17 ++++++++ 4 files changed, 100 insertions(+), 32 deletions(-) diff --git a/src/slic3r/GUI/ConfigValueFormatter.cpp b/src/slic3r/GUI/ConfigValueFormatter.cpp index 6f9128841b..17cf902217 100644 --- a/src/slic3r/GUI/ConfigValueFormatter.cpp +++ b/src/slic3r/GUI/ConfigValueFormatter.cpp @@ -188,6 +188,17 @@ wxString get_string_value(const std::string& opt_key, const DynamicPrintConfig& out = double_to_string(opt->value) + (opt->percent ? "%" : ""); return out; } + case coFloatsOrPercents: { + const auto* values = static_cast*>(option); + // Orca: Preset comparison may request the entire vector instead of an indexed entry. + if (orig_opt_idx < 0) + return from_u8(option->serialize()); + if (opt_idx < values->size()) { + const FloatOrPercent& value = values->get_at(opt_idx); + return double_to_string(value.value) + (value.percent ? "%" : ""); + } + return _L("Undefined"); + } case coEnum: { return get_string_from_enum(pure_key, config, pure_key == "top_surface_pattern" || diff --git a/src/slic3r/GUI/Search.cpp b/src/slic3r/GUI/Search.cpp index f8fc51ed02..eec03ebf62 100644 --- a/src/slic3r/GUI/Search.cpp +++ b/src/slic3r/GUI/Search.cpp @@ -62,7 +62,7 @@ static char marker_by_type(Preset::Type type, PrinterTechnology pt) } } -std::string Option::opt_key() const { return into_u8(key).substr(2); } +std::string Option::opt_key() const { return key.size() < 2 ? std::string() : into_u8(key).substr(2); } void FoundOption::get_marked_label_and_tooltip(const char **label_, const char **tooltip_) const { @@ -116,6 +116,7 @@ void OptionsSearcher::append_options(DynamicPrintConfig *config, Preset::Type ty case coFloats: change_opt_key(opt_key, config, cnt); break; case coStrings: change_opt_key(opt_key, config, cnt); break; case coPercents: change_opt_key(opt_key, config, cnt); break; + case coFloatsOrPercents: change_opt_key>(opt_key, config, cnt); break; case coPoints: change_opt_key(opt_key, config, cnt); break; // BBS case coEnums: change_opt_key(opt_key, config, cnt); break; @@ -334,29 +335,46 @@ const Option &OptionsSearcher::get_option(size_t pos_in_filter) const const Option &OptionsSearcher::get_option(const std::string &opt_key, Preset::Type type, int &variant_index) const { + auto not_found = [&variant_index]() -> const Option& { + static const Option empty_option; + variant_index = -2; + return empty_option; + }; + + variant_index = -1; std::string opt_key2 = opt_key; if (auto n = opt_key.find('#'); n != std::string::npos) { variant_index = std::atoi(opt_key.c_str() + n + 1); opt_key2 = opt_key.substr(0, n); } - auto it = std::lower_bound(options.begin(), options.end(), Option({boost::nowide::widen(get_key(opt_key2, type))})); - // BBS: return the 0th option when not found in searcher caused by mode difference - // assert(it != options.end()); - if (it == options.end()) { variant_index = -2 ; return options[0]; } - if (it->opt_key() == opt_key2) { + const std::wstring key = boost::nowide::widen(get_key(opt_key2, type)); + auto it = std::lower_bound(options.begin(), options.end(), Option({key})); + if (it == options.end()) return not_found(); + if (it->key == key) { variant_index = -1; } else { - const std::string opt_key3 = opt_key2 + "#"; - it = std::lower_bound(it, options.end(), Option({boost::nowide::widen(get_key(opt_key3, type))})); - if (it == options.end() || it->opt_key().compare(0, opt_key3.length(), opt_key3) != 0) { - variant_index = -2; // Not found - return options[0]; + const std::wstring prefix = key + L"#"; + it = std::lower_bound(it, options.end(), Option({prefix})); + if (it == options.end() || it->key.compare(0, prefix.length(), prefix) != 0) + return not_found(); + // Orca: Copy-parameters dialogs request the base key, without a vector index. + if (variant_index < 0) return *it; + + const bool has_mode = type == Preset::TYPE_PRINTER && printer_options_with_variant_2.count(opt_key2) > 0; + const bool has_variant = + (type == Preset::TYPE_PRINT && print_options_with_variant.count(opt_key2) > 0) || + (type == Preset::TYPE_FILAMENT && filament_options_with_variant.count(opt_key2) > 0) || + (type == Preset::TYPE_PRINTER && printer_options_with_variant_1.count(opt_key2) > 0) || has_mode; + if (!has_variant || has_mode) { + // Orca: Machine limits store (Normal, Silent) pairs per variant; the UI registers only #0/#1. + const std::wstring indexed_key = has_mode ? prefix + std::to_wstring(variant_index % 2) : + boost::nowide::widen(get_key(opt_key, type)); + it = std::lower_bound(it, options.end(), Option({indexed_key})); + if (it == options.end() || it->key != indexed_key) + return not_found(); + if (!has_variant) + variant_index = -1; } - auto it2 = it; - ++it2; - if (it2 != options.end() && it2->opt_key().compare(0, opt_key3.length(), opt_key3) == 0 - && printer_options_with_variant_1.find(opt_key2) == printer_options_with_variant_1.end()) - variant_index = -2; } return options[it - options.begin()]; diff --git a/src/slic3r/GUI/UnsavedChangesDialog.cpp b/src/slic3r/GUI/UnsavedChangesDialog.cpp index 65b678953d..acf50e6641 100644 --- a/src/slic3r/GUI/UnsavedChangesDialog.cpp +++ b/src/slic3r/GUI/UnsavedChangesDialog.cpp @@ -1490,7 +1490,15 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, DynamicConfig * config for (const std::string &opt_key : config->keys()) { int variant_index = -2; - const Search::Option &option = searcher.get_option(opt_key, type, variant_index); + Search::Option option = searcher.get_option(opt_key, type, variant_index); + if (variant_index == -2) { + // Orca: Every transferred setting must remain visible even when it is absent from the search index. + const ConfigOptionDef* def = print_config_def.get(opt_key); + const std::string label = def ? (def->full_label.empty() ? def->label : def->full_label) : std::string(); + option.label_local = (label.empty() ? from_u8(opt_key) : _L(label)).ToStdWstring(); + option.category_local = (def && !def->category.empty() ? + Tab::translate_category(from_u8(def->category), type) : _L("Other")).ToStdWstring(); + } auto category = option.category_local; auto opt = dynamic_cast(config->option(opt_key)); std::string value_from = opt->vserialize()[from]; @@ -1518,6 +1526,8 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres else presets_list.emplace_back(presets_); + const bool multiple_extruders = wxGetApp().preset_bundle->get_printer_extruder_count() > 1; + // Display a dialog showing the dirty options in a human readable form. for (PresetCollection* presets : presets_list) { @@ -1553,29 +1563,41 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres auto variant_key = Preset::get_iot_type_string(type) + "_extruder_variant"; auto id_key = Preset::get_iot_type_string(type) + "_extruder_id"; - auto extruder_variant = dynamic_cast(old_config.option(variant_key)); - auto extruder_id = dynamic_cast(old_config.option(id_key)); + // Orca: Dirty indices belong to the edited config, which may contain newly added variants. + auto extruder_variant = dynamic_cast(new_config.option(variant_key)); + auto extruder_id = dynamic_cast(new_config.option(id_key)); for (const std::string& opt_key : dirty_options) { int variant_index = -2; const Search::Option &option = searcher.get_option(opt_key, type, variant_index); - if (option.opt_key() != opt_key && variant_index < -1) { + if (variant_index == -2) { // When founded option isn't the correct one. // It can be for dirty_options: "default_print_profile", "printer_model", "printer_settings_id", // because of they don't exist in searcher continue; } - auto category = option.category_local; - if (variant_index >= 0) { - if (printer_options_with_variant_2.count(opt_key.substr(0, opt_key.find_last_of('#'))) > 0) - variant_index /= 2; - if (boost::nowide::narrow(category).find("Extruder ") == 0) - category = category.substr(0, 8); - if (extruder_id) - category = category + (wxString(" {") + (extruder_id->values[variant_index] == 1 ? _L("Left: ") : _L("Right: ")) - + L(extruder_variant->values[variant_index]) + "}"); - else - category = category + (wxString(" {") + L(extruder_variant->values[variant_index]) + "}"); + wxString category = option.category_local; + wxString label = option.label_local; + if (type == Preset::TYPE_PRINTER && variant_index >= 0 && + printer_options_with_variant_2.count(get_pure_opt_key(opt_key)) > 0) { + // Orca: silent_mode is obsolete on import, but its option and two-column UI still exist. + // Keep mode labels for configs that explicitly enable it; omit them in the default single-mode UI. + if (new_config.opt_bool("silent_mode")) + label += " (" + (variant_index % 2 == 0 ? _L("Normal") : _L("Silent")) + ")"; + variant_index /= 2; + } + if (variant_index >= 0 && extruder_variant && variant_index < extruder_variant->size()) { + // Orca: Match the untranslated category and use the same extruder names as the printer tabs. + if (option.category.compare(0, 9, L"Extruder ") == 0) + category = _L("Extruder"); + wxString variant_label = L(extruder_variant->values[variant_index]); + // Orca: An extruder name only disambiguates variants on printers with multiple extruders. + if (multiple_extruders && extruder_id && variant_index < extruder_id->size() && extruder_id->values[variant_index] > 0) { + const wxString extruder_name = Tab::translate_category( + wxString::Format("Extruder %d", extruder_id->values[variant_index]), Preset::TYPE_PRINTER); + variant_label = extruder_name + " (" + variant_label + ")"; + } + category = variant_label + ": " + category; } /*m_tree->Append(opt_key, type, option.category_local, option.group_local, option.label_local, @@ -1584,7 +1606,7 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, PresetCollection* pres //PresetItem pi = {opt_key, type, 1983}; //m_presetitems.push_back() - PresetItem pi = {type, opt_key, category, option.group_local, option.label_local, get_string_value(opt_key, old_config), get_string_value(opt_key, new_config)}; + PresetItem pi = {type, opt_key, category, option.group_local, label, get_string_value(opt_key, old_config), get_string_value(opt_key, new_config)}; m_presetitems.push_back(pi); } diff --git a/tests/libslic3r/test_preset_diff.cpp b/tests/libslic3r/test_preset_diff.cpp index 399fdabae1..22255c049e 100644 --- a/tests/libslic3r/test_preset_diff.cpp +++ b/tests/libslic3r/test_preset_diff.cpp @@ -33,3 +33,20 @@ TEST_CASE("deep_diff flags new vector entries that duplicate values[0]", "[Prese // specific to new indices rather than flagging the whole vector. REQUIRE(std::find(diff.begin(), diff.end(), "nozzle_diameter#0") == diff.end()); } + +TEST_CASE("deep_diff distinguishes absolute and percentage speeds for each variant", "[PresetDiff][Config]") +{ + const size_t changed_index = GENERATE(size_t(0), size_t(1)); + Preset reference(Preset::TYPE_PRINT, "ref"); + reference.config.set_key_value("small_perimeter_speed", new ConfigOptionFloatsOrPercents{{50., false}, {50., false}}); + + Preset edited = reference; + edited.config.option("small_perimeter_speed")->values[changed_index].percent = true; + + const auto diff = PresetCollection::dirty_options(&edited, &reference, /*deep_compare=*/true); + REQUIRE(diff == std::vector{"small_perimeter_speed#" + std::to_string(changed_index)}); + + DynamicPrintConfig transferred = reference.config; + transferred.apply_only(edited.config, diff); + REQUIRE(*transferred.option("small_perimeter_speed") == *edited.config.option("small_perimeter_speed")); +} From f520e9221f220657f752d269ead37dd61e9cb0c3 Mon Sep 17 00:00:00 2001 From: SoftFever <103989404+SoftFever@users.noreply.github.com> Date: Fri, 18 Sep 2026 00:39:46 +0800 Subject: [PATCH 6/8] Repair shipped default materials and obsolete settings, and validate them (#15741) * add orca profile skill * add default material check Improve validation for default materials and filament profiles * Fix default materials and obsolete keys * clarifying orca-profiles skill --- .claude/skills/orca-profiles/SKILL.md | 120 ++++ .../references/filament-profiles.md | 207 ++++++ .../skills/orca-profiles/references/ids.md | 183 +++++ .../references/machine-profiles.md | 194 ++++++ .../references/process-profiles.md | 145 ++++ .../references/review-checklist.md | 177 +++++ .../orca-profiles/references/validation.md | 264 +++++++ .../orca-profiles/references/vendor-bundle.md | 175 +++++ resources/profiles/Afinia.json | 2 +- .../Afinia/machine/Afinia H+1(HS).json | 2 +- .../Afinia/machine/fdm_afinia_common.json | 7 +- .../Afinia/machine/fdm_machine_common.json | 1 - ....18mm Fine @Afinia H+1(HS) 0.6 nozzle.json | 2 - ...m Standard @Afinia H+1(HS) 0.6 nozzle.json | 2 - ...m Standard @Afinia H+1(HS) 0.6 nozzle.json | 2 - ...m Strength @Afinia H+1(HS) 0.6 nozzle.json | 2 - ...36mm Draft @Afinia H+1(HS) 0.6 nozzle.json | 2 - ...xtra Draft @Afinia H+1(HS) 0.6 nozzle.json | 2 - .../process/fdm_process_afinia_common.json | 1 - .../Afinia/process/fdm_process_common.json | 1 - resources/profiles/Anker.json | 2 +- .../machine/Anker M5 All-Metal Hot End.json | 2 +- .../profiles/Anker/machine/Anker M5.json | 2 +- .../profiles/Anker/machine/Anker M5C.json | 2 +- .../Anker/machine/fdm_machine_common.json | 1 - resources/profiles/Anycubic.json | 2 +- ... ABS @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ... ABS @Anycubic Kobra 3 Max 0.6 nozzle.json | 6 - ... ABS @Anycubic Kobra 3 Max 0.8 nozzle.json | 6 - ...bic ABS @Anycubic Kobra S1 0.4 nozzle.json | 6 - ...ubic ASA @Anycubic Kobra 3 0.4 nozzle.json | 6 - ... ASA @Anycubic Kobra 3 Max 0.6 nozzle.json | 6 - ... ASA @Anycubic Kobra 3 Max 0.8 nozzle.json | 6 - ...bic ASA @Anycubic Kobra S1 0.4 nozzle.json | 6 - ... 95A @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...bic PETG @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...PETG @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...PETG @Anycubic Kobra 3 Max 0.6 nozzle.json | 6 - ...PETG @Anycubic Kobra 3 Max 0.8 nozzle.json | 6 - ...ic PETG @Anycubic Kobra S1 0.4 nozzle.json | 6 - ... PLA @Anycubic Kobra 2 Max 0.4 nozzle.json | 6 - ... PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json | 6 - ...PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json | 6 - ... PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json | 6 - ...ubic PLA @Anycubic Kobra 3 0.2 nozzle.json | 6 - ...ubic PLA @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...ubic PLA @Anycubic Kobra 3 0.6 nozzle.json | 6 - ...ubic PLA @Anycubic Kobra 3 0.8 nozzle.json | 6 - ... PLA @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ... PLA @Anycubic Kobra 3 Max 0.6 nozzle.json | 6 - ... PLA @Anycubic Kobra 3 Max 0.8 nozzle.json | 6 - ...ic PLA @Anycubic Kobra Neo 0.4 nozzle.json | 6 - ...bic PLA @Anycubic Kobra S1 0.4 nozzle.json | 6 - ...PLA Glow @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...gh Speed @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...peed @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...h Speed @Anycubic Kobra S1 0.4 nozzle.json | 6 - ...nous @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...LA Matte @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...atte @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...c PLA SE @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...Silk @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...LA Silk @Anycubic Kobra S1 0.4 nozzle.json | 6 - ...PLA Slik @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...bic PLA+ @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...ic PLA+ @Anycubic Kobra S1 0.4 nozzle.json | 6 - ... TPU @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ... TPU @Anycubic Kobra 3 Max 0.6 nozzle.json | 6 - ... TPU @Anycubic Kobra 3 Max 0.8 nozzle.json | 6 - ...bic TPU @Anycubic Kobra S1 0.4 nozzle.json | 6 - ...eric ABS @Anycubic Kobra 3 0.4 nozzle.json | 6 - ...asic @Anycubic Kobra 3 Max 0.4 nozzle.json | 6 - ...eric TPU @Anycubic Kobra 3 0.4 nozzle.json | 6 - .../Anycubic Kobra 2 Max 0.4 nozzle.json | 1 - .../machine/Anycubic Kobra 2 Max.json | 2 +- .../Anycubic Kobra 2 Neo 0.4 nozzle.json | 1 - .../Anycubic Kobra 2 Plus 0.4 nozzle.json | 1 - .../machine/Anycubic Kobra 2 Plus.json | 2 +- .../Anycubic Kobra 2 Pro 0.4 nozzle.json | 1 - .../machine/Anycubic Kobra 2 Pro.json | 2 +- .../machine/Anycubic Kobra 3 0.2 nozzle.json | 1 - .../machine/Anycubic Kobra 3 0.4 nozzle.json | 1 - .../machine/Anycubic Kobra 3 0.6 nozzle.json | 1 - .../machine/Anycubic Kobra 3 0.8 nozzle.json | 1 - .../Anycubic Kobra 3 Max 0.4 nozzle.json | 11 +- .../Anycubic Kobra 3 Max 0.6 nozzle.json | 1 - .../Anycubic Kobra 3 Max 0.8 nozzle.json | 1 - .../machine/Anycubic Kobra 3 Max.json | 2 +- .../Anycubic/machine/Anycubic Kobra 3.json | 2 +- .../Anycubic Kobra Neo 0.4 nozzle.json | 1 - .../Anycubic/machine/Anycubic Kobra Neo.json | 2 +- .../machine/Anycubic Kobra S1 0.4 nozzle.json | 1 - .../Anycubic Kobra S1 Max 0.25 nozzle.json | 503 +++++++------- .../Anycubic Kobra S1 Max 0.4 nozzle.json | 503 +++++++------- .../Anycubic Kobra S1 Max 0.6 nozzle.json | 503 +++++++------- .../Anycubic Kobra S1 Max 0.8 nozzle.json | 503 +++++++------- .../machine/Anycubic Kobra S1 Max.json | 24 +- .../Anycubic/machine/Anycubic Kobra S1.json | 2 +- .../machine/Anycubic Kobra X 0.4 nozzle.json | 15 +- .../Anycubic/machine/Anycubic Predator.json | 2 +- .../Anycubic/machine/fdm_machine_common.json | 1 - ...rd @Anycubic Kobra S1 Max 0.25 nozzle.json | 643 +++++++++--------- ...ghDetail @Anycubic Kobra 3 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.4 nozzle.json | 4 - ...rd @Anycubic Kobra S1 Max 0.25 nozzle.json | 643 +++++++++--------- ...ard @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ...Standard @Anycubic Kobra X 0.4 nozzle.json | 3 - ...m Detail @Anycubic Kobra 3 0.2 nozzle.json | 2 - ...rd @Anycubic Kobra S1 Max 0.25 nozzle.json | 643 +++++++++--------- ...tail @Anycubic Kobra 2 Neo 0.4 nozzle.json | 2 - ...m Detail @Anycubic Kobra 3 0.4 nozzle.json | 2 - ...Detail @Anycubic Kobra Neo 0.4 nozzle.json | 2 - ... Quality @Anycubic Kobra X 0.4 nozzle.json | 3 - ...dard @Anycubic Kobra 3 Max 0.4 nozzle.json | 4 - ...rd @Anycubic Kobra S1 Max 0.25 nozzle.json | 643 +++++++++--------- ...ard @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ...Standard @Anycubic Kobra X 0.4 nozzle.json | 3 - ...rd @Anycubic Kobra S1 Max 0.25 nozzle.json | 643 +++++++++--------- .../0.15mm Optimal @Anycubic 4MaxPro2.json | 1 - .../0.15mm Optimal @Anycubic Chiron.json | 1 - .../0.15mm Optimal @Anycubic Kobra.json | 1 - .../0.15mm Optimal @Anycubic Kobra2.json | 1 - .../0.15mm Optimal @Anycubic KobraMax.json | 1 - .../0.15mm Optimal @Anycubic KobraPlus.json | 1 - .../0.15mm Optimal @Anycubic Vyper.json | 1 - .../0.15mm Optimal @Anycubic i3MegaS.json | 1 - ...ity @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ... Quality @Anycubic Kobra X 0.4 nozzle.json | 3 - ...imal @Anycubic Kobra 2 Pro 0.4 nozzle.json | 2 - ... Optimal @Anycubic Kobra 3 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 2 Neo 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.4 nozzle.json | 4 - ...andard @Anycubic Kobra Neo 0.4 nozzle.json | 2 - ...ard @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ...Standard @Anycubic Kobra X 0.4 nozzle.json | 3 - ...dard @Anycubic Kobra 3 Max 0.6 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.6 nozzle.json | 643 +++++++++--------- ...ity @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ... Quality @Anycubic Kobra X 0.4 nozzle.json | 3 - .../0.20mm Standard @Anycubic 4MaxPro2.json | 1 - .../0.20mm Standard @Anycubic Chiron.json | 1 - ...dard @Anycubic Kobra 2 Max 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 2 Neo 0.4 nozzle.json | 2 - ...ard @Anycubic Kobra 2 Plus 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 2 Pro 0.4 nozzle.json | 2 - ...Standard @Anycubic Kobra 3 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.4 nozzle.json | 4 - ...dard @Anycubic Kobra 3 Max 0.8 nozzle.json | 3 - ...andard @Anycubic Kobra Neo 0.4 nozzle.json | 2 - ...tandard @Anycubic Kobra S1 0.4 nozzle.json | 2 - ...ard @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ...Standard @Anycubic Kobra X 0.4 nozzle.json | 3 - .../0.20mm Standard @Anycubic Kobra.json | 1 - .../0.20mm Standard @Anycubic Kobra2.json | 1 - .../0.20mm Standard @Anycubic KobraMax.json | 1 - .../0.20mm Standard @Anycubic KobraPlus.json | 1 - .../0.20mm Standard @Anycubic Vyper.json | 1 - .../0.20mm Standard @Anycubic i3MegaS.json | 1 - ...mm Draft @Anycubic Kobra 3 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.4 nozzle.json | 4 - ...dard @Anycubic Kobra 3 Max 0.6 nozzle.json | 3 - ...dard @Anycubic Kobra 3 Max 0.8 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ...ard @Anycubic Kobra S1 Max 0.6 nozzle.json | 643 +++++++++--------- ...ard @Anycubic Kobra S1 Max 0.8 nozzle.json | 643 +++++++++--------- ...Standard @Anycubic Kobra X 0.4 nozzle.json | 3 - ...raft @Anycubic Kobra 2 Pro 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 2 Neo 0.4 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.4 nozzle.json | 4 - ...andard @Anycubic Kobra Neo 0.4 nozzle.json | 2 - ...ard @Anycubic Kobra S1 Max 0.4 nozzle.json | 637 +++++++++-------- ...Standard @Anycubic Kobra X 0.4 nozzle.json | 3 - ...perDraft @Anycubic Kobra 3 0.4 nozzle.json | 2 - .../0.30mm Draft @Anycubic 4MaxPro2.json | 1 - .../0.30mm Draft @Anycubic Chiron.json | 1 - .../process/0.30mm Draft @Anycubic Kobra.json | 1 - .../0.30mm Draft @Anycubic Kobra2.json | 1 - .../0.30mm Draft @Anycubic KobraMax.json | 1 - .../0.30mm Draft @Anycubic KobraPlus.json | 1 - .../process/0.30mm Draft @Anycubic Vyper.json | 1 - .../0.30mm Draft @Anycubic i3MegaS.json | 1 - ...Standard @Anycubic Kobra 3 0.6 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.6 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.6 nozzle.json | 643 +++++++++--------- ...dard @Anycubic Kobra 3 Max 0.8 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.8 nozzle.json | 643 +++++++++--------- ...dard @Anycubic Kobra 3 Max 0.6 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.6 nozzle.json | 643 +++++++++--------- ...Standard @Anycubic Kobra 3 0.8 nozzle.json | 2 - ...dard @Anycubic Kobra 3 Max 0.8 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.8 nozzle.json | 643 +++++++++--------- ...dard @Anycubic Kobra 3 Max 0.6 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.6 nozzle.json | 643 +++++++++--------- ...dard @Anycubic Kobra 3 Max 0.8 nozzle.json | 3 - ...ard @Anycubic Kobra S1 Max 0.8 nozzle.json | 643 +++++++++--------- ...ard @Anycubic Kobra S1 Max 0.8 nozzle.json | 643 +++++++++--------- .../Anycubic/process/fdm_process_common.json | 2 - resources/profiles/Artillery.json | 2 +- .../machine/Artillery M1 Pro 0.2 nozzle.json | 1 - .../machine/Artillery M1 Pro 0.4 nozzle.json | 1 - .../machine/Artillery M1 Pro 0.6 nozzle.json | 1 - .../machine/Artillery M1 Pro 0.8 nozzle.json | 1 - .../Artillery/machine/Artillery M1 Pro.json | 2 +- ...tillery Sidewinder X3 Plus 0.4 nozzle.json | 1 - ...rtillery Sidewinder X3 Pro 0.4 nozzle.json | 1 - ...tillery Sidewinder X4 Plus 0.4 nozzle.json | 1 - ...rtillery Sidewinder X4 Pro 0.4 nozzle.json | 1 - .../Artillery/machine/fdm_machine_common.json | 1 - ...tra Fine @Artillery M1 Pro 0.4 nozzle.json | 1 - ... Quality @Artillery M1 Pro 0.2 nozzle.json | 1 - ... Quality @Artillery M1 Pro 0.4 nozzle.json | 1 - ...2mm Fine @Artillery M1 Pro 0.4 nozzle.json | 1 - ... Quality @Artillery M1 Pro 0.4 nozzle.json | 1 - .../0.15mm Optimal @Artillery Genius Pro.json | 7 +- .../0.15mm Optimal @Artillery Genius.json | 7 +- ... Quality @Artillery M1 Pro 0.4 nozzle.json | 1 - .../0.16mm Optimal @Artillery Hornet.json | 7 +- ... Optimal @Artillery M1 Pro 0.4 nozzle.json | 1 - .../process/0.16mm Optimal @Artillery X1.json | 7 +- ...0.20mm Standard @Artillery Genius Pro.json | 7 +- .../0.20mm Standard @Artillery Genius.json | 7 +- .../0.20mm Standard @Artillery Hornet.json | 7 +- ...Standard @Artillery M1 Pro 0.4 nozzle.json | 1 - .../0.20mm Standard @Artillery X1.json | 7 +- .../0.20mm Standard @Artillery X2.json | 7 +- ...Standard @Artillery X3Plus 0.4 nozzle.json | 1 - ... Standard @Artillery X3Pro 0.4 nozzle.json | 1 - ...Standard @Artillery X4Plus 0.4 nozzle.json | 1 - ... Standard @Artillery X4Pro 0.4 nozzle.json | 1 - ...Strength @Artillery M1 Pro 0.4 nozzle.json | 1 - .../0.24mm Draft @Artillery Hornet.json | 7 +- ...mm Draft @Artillery M1 Pro 0.4 nozzle.json | 1 - ...mm Draft @Artillery M1 Pro 0.6 nozzle.json | 1 - ...mm Draft @Artillery M1 Pro 0.8 nozzle.json | 1 - .../process/0.24mm Draft @Artillery X1.json | 7 +- .../0.25mm Draft @Artillery Genius Pro.json | 7 +- .../0.25mm Draft @Artillery Genius.json | 7 +- ...ra Draft @Artillery M1 Pro 0.4 nozzle.json | 1 - .../Artillery/process/fdm_process_common.json | 2 - resources/profiles/BBL.json | 2 +- .../BBL/machine/Bambu Lab A1 mini.json | 2 +- .../profiles/BBL/machine/Bambu Lab A1.json | 2 +- .../profiles/BBL/machine/Bambu Lab A2L.json | 2 +- .../profiles/BBL/machine/Bambu Lab H2C.json | 2 +- .../BBL/machine/Bambu Lab H2D Pro.json | 2 +- .../profiles/BBL/machine/Bambu Lab H2D.json | 2 +- .../profiles/BBL/machine/Bambu Lab H2S.json | 2 +- .../profiles/BBL/machine/Bambu Lab P1P.json | 2 +- .../profiles/BBL/machine/Bambu Lab P1S.json | 2 +- .../profiles/BBL/machine/Bambu Lab P2S.json | 2 +- .../BBL/machine/Bambu Lab X1 Carbon.json | 2 +- .../profiles/BBL/machine/Bambu Lab X1.json | 2 +- .../profiles/BBL/machine/Bambu Lab X1E.json | 2 +- .../profiles/BBL/machine/Bambu Lab X2D.json | 2 +- .../BBL/machine/fdm_machine_common.json | 1 - .../0.06mm Fine @BBL P1P 0.2 nozzle.json | 4 - ...06mm High Quality @BBL P1P 0.2 nozzle.json | 4 - ...06mm High Quality @BBL X1C 0.2 nozzle.json | 5 - .../0.06mm Standard @BBL X1C 0.2 nozzle.json | 5 - .../process/0.08mm Extra Fine @BBL P1P.json | 4 - .../process/0.08mm Extra Fine @BBL X1C.json | 5 - ...08mm High Quality @BBL A2L 0.2 nozzle.json | 1 - .../process/0.08mm High Quality @BBL A2L.json | 1 - ...08mm High Quality @BBL H2S 0.2 nozzle.json | 5 - .../process/0.08mm High Quality @BBL H2S.json | 5 - ...08mm High Quality @BBL P1P 0.2 nozzle.json | 4 - .../process/0.08mm High Quality @BBL P1P.json | 4 - ...08mm High Quality @BBL P2S 0.2 nozzle.json | 5 - .../process/0.08mm High Quality @BBL P2S.json | 5 - ...08mm High Quality @BBL X1C 0.2 nozzle.json | 5 - .../process/0.08mm High Quality @BBL X1C.json | 5 - .../0.08mm Optimal @BBL P1P 0.2 nozzle.json | 4 - .../0.08mm Standard @BBL X1C 0.2 nozzle.json | 5 - ...10mm High Quality @BBL P1P 0.2 nozzle.json | 4 - ...10mm High Quality @BBL X1C 0.2 nozzle.json | 5 - .../0.10mm Standard @BBL A2L 0.2 nozzle.json | 4 - .../0.10mm Standard @BBL H2S 0.2 nozzle.json | 5 - .../0.10mm Standard @BBL P1P 0.2 nozzle.json | 4 - .../0.10mm Standard @BBL P2S 0.2 nozzle.json | 5 - .../0.10mm Standard @BBL X1C 0.2 nozzle.json | 5 - ... Balanced Quality @BBL A2L 0.2 nozzle.json | 1 - ... Balanced Quality @BBL H2S 0.2 nozzle.json | 5 - ... Balanced Quality @BBL P2S 0.2 nozzle.json | 5 - .../0.12mm Draft @BBL P1P 0.2 nozzle.json | 4 - .../BBL/process/0.12mm Fine @BBL P1P.json | 4 - .../BBL/process/0.12mm Fine @BBL X1C.json | 5 - .../process/0.12mm High Quality @BBL A2L.json | 1 - .../process/0.12mm High Quality @BBL H2S.json | 5 - .../process/0.12mm High Quality @BBL P1P.json | 4 - .../process/0.12mm High Quality @BBL P2S.json | 5 - .../process/0.12mm High Quality @BBL X1C.json | 5 - .../0.12mm Standard @BBL X1C 0.2 nozzle.json | 5 - ....14mm Extra Draft @BBL P1P 0.2 nozzle.json | 4 - .../0.14mm Standard @BBL X1C 0.2 nozzle.json | 5 - .../process/0.16mm High Quality @BBL A2L.json | 1 - .../process/0.16mm High Quality @BBL H2S.json | 5 - .../process/0.16mm High Quality @BBL P1P.json | 4 - .../process/0.16mm High Quality @BBL P2S.json | 5 - .../process/0.16mm High Quality @BBL X1C.json | 5 - .../BBL/process/0.16mm Optimal @BBL P1P.json | 4 - .../BBL/process/0.16mm Optimal @BBL X1C.json | 5 - .../BBL/process/0.16mm Standard @BBL A2L.json | 1 - .../BBL/process/0.16mm Standard @BBL H2S.json | 5 - .../BBL/process/0.16mm Standard @BBL P2S.json | 5 - ... Balanced Quality @BBL A2L 0.6 nozzle.json | 1 - ... Balanced Quality @BBL H2S 0.6 nozzle.json | 5 - ... Balanced Quality @BBL P2S 0.6 nozzle.json | 5 - .../0.18mm Fine @BBL P1P 0.6 nozzle.json | 4 - .../0.18mm Standard @BBL X1C 0.6 nozzle.json | 5 - .../process/0.20mm High Quality @BBL A2L.json | 1 - .../process/0.20mm High Quality @BBL H2S.json | 5 - .../process/0.20mm High Quality @BBL P2S.json | 5 - .../BBL/process/0.20mm Standard @BBL A2L.json | 1 - .../BBL/process/0.20mm Standard @BBL H2S.json | 5 - .../BBL/process/0.20mm Standard @BBL P1P.json | 4 - .../BBL/process/0.20mm Standard @BBL P2S.json | 5 - .../BBL/process/0.20mm Standard @BBL X1C.json | 5 - .../BBL/process/0.20mm Steady @BBL A2L.json | 5 - .../BBL/process/0.20mm Strength @BBL P1P.json | 4 - .../BBL/process/0.20mm Strength @BBL X1C.json | 5 - ... Balanced Quality @BBL A2L 0.6 nozzle.json | 1 - ... Balanced Quality @BBL A2L 0.8 nozzle.json | 1 - ... Balanced Quality @BBL H2S 0.6 nozzle.json | 5 - ... Balanced Quality @BBL H2S 0.8 nozzle.json | 5 - ... Balanced Quality @BBL P2S 0.6 nozzle.json | 5 - ... Balanced Quality @BBL P2S 0.8 nozzle.json | 5 - .../BBL/process/0.24mm Draft @BBL P1P.json | 4 - .../BBL/process/0.24mm Draft @BBL X1C.json | 5 - .../0.24mm Fine @BBL P1P 0.8 nozzle.json | 4 - .../0.24mm Optimal @BBL P1P 0.6 nozzle.json | 4 - .../BBL/process/0.24mm Standard @BBL A2L.json | 1 - .../BBL/process/0.24mm Standard @BBL H2S.json | 5 - .../BBL/process/0.24mm Standard @BBL P2S.json | 5 - .../0.24mm Standard @BBL X1C 0.6 nozzle.json | 5 - .../0.24mm Standard @BBL X1C 0.8 nozzle.json | 5 - .../process/0.28mm Extra Draft @BBL P1P.json | 4 - .../process/0.28mm Extra Draft @BBL X1C.json | 5 - .../0.30mm Standard @BBL A2L 0.6 nozzle.json | 1 - .../0.30mm Standard @BBL H2S 0.6 nozzle.json | 5 - .../0.30mm Standard @BBL P1P 0.6 nozzle.json | 4 - .../0.30mm Standard @BBL P2S 0.6 nozzle.json | 5 - .../0.30mm Standard @BBL X1 0.6 nozzle.json | 4 - .../0.30mm Standard @BBL X1C 0.6 nozzle.json | 5 - .../0.30mm Strength @BBL P1P 0.6 nozzle.json | 4 - .../0.30mm Strength @BBL X1C 0.6 nozzle.json | 5 - ... Balanced Quality @BBL A2L 0.8 nozzle.json | 1 - ... Balanced Quality @BBL H2S 0.8 nozzle.json | 5 - ... Balanced Quality @BBL P2S 0.8 nozzle.json | 5 - .../0.32mm Optimal @BBL P1P 0.8 nozzle.json | 4 - .../0.32mm Standard @BBL X1C 0.8 nozzle.json | 5 - .../0.36mm Draft @BBL P1P 0.6 nozzle.json | 4 - .../0.36mm Standard @BBL X1C 0.6 nozzle.json | 5 - .../0.40mm Standard @BBL A2L 0.8 nozzle.json | 1 - .../0.40mm Standard @BBL H2S 0.8 nozzle.json | 5 - .../0.40mm Standard @BBL P1P 0.8 nozzle.json | 4 - .../0.40mm Standard @BBL P2S 0.8 nozzle.json | 5 - .../0.40mm Standard @BBL X1 0.8 nozzle.json | 4 - .../0.40mm Standard @BBL X1C 0.8 nozzle.json | 5 - ....42mm Extra Draft @BBL P1P 0.6 nozzle.json | 4 - .../0.42mm Standard @BBL X1C 0.6 nozzle.json | 5 - .../0.48mm Draft @BBL P1P 0.8 nozzle.json | 4 - .../0.48mm Standard @BBL X1C 0.8 nozzle.json | 5 - ....56mm Extra Draft @BBL P1P 0.8 nozzle.json | 4 - .../0.56mm Standard @BBL X1C 0.8 nozzle.json | 5 - .../BBL/process/fdm_process_common.json | 6 - .../BBL/process/fdm_process_dual_common.json | 7 - resources/profiles/BIQU.json | 2 +- .../machine/BIQU Hurakan (0.4 nozzle).json | 1 - .../BIQU/machine/fdm_biqu_common.json | 1 - .../BIQU/machine/fdm_klipper_common.json | 1 - .../BIQU/machine/fdm_machine_common.json | 2 - .../BIQU/process/fdm_process_biqu_common.json | 1 - .../BIQU/process/fdm_process_common.json | 1 - .../process/fdm_process_hurakan_common.json | 1 - resources/profiles/Blocks.json | 2 +- .../Blocks/machine/fdm_klipper_common.json | 1 - .../Blocks/machine/fdm_machine_common.json | 1 - .../0.12mm Fine 0.4 nozzle @Blocks_RF50.json | 1 - ....16mm Optimal 0.4 nozzle @Blocks_RF50.json | 1 - ....20mm Optimal 0.6 nozzle @Blocks_RF50.json | 1 - ...20mm Standard 0.4 nozzle @Blocks_RF50.json | 1 - .../0.24mm Draft 0.4 nozzle @Blocks_RF50.json | 1 - ...26mm Standard 0.6 nozzle @Blocks_RF50.json | 1 - ...m Extra Draft 0.4 nozzle @Blocks_RF50.json | 1 - ....30mm Optimal 0.8 nozzle @Blocks_RF50.json | 1 - .../0.32mm Draft 0.6 nozzle @Blocks_RF50.json | 1 - ...m Extra Draft 0.6 nozzle @Blocks_RF50.json | 1 - ...38mm Standard 0.8 nozzle @Blocks_RF50.json | 1 - .../0.46mm Draft 0.8 nozzle @Blocks_RF50.json | 1 - ...m Extra Draft 0.8 nozzle @Blocks_RF50.json | 1 - .../process/fdm_process_blocks_common.json | 1 - .../fdm_process_common 0.6 nozzle.json | 1 - .../fdm_process_common 0.8 nozzle.json | 1 - .../fdm_process_common 1.0 nozzle.json | 1 - .../fdm_process_common 1.2 nozzle.json | 1 - .../Blocks/process/fdm_process_common.json | 1 - resources/profiles/CONSTRUCT3D.json | 2 +- .../machine/fdm_machine_common.json | 2 - .../process/fdm_process_common.json | 2 - resources/profiles/Chuanying.json | 2 +- .../filament/Generic ASA @Chuanying.json | 5 +- .../filament/Generic HIPS @Chuanying.json | 8 +- .../filament/Generic HS PLA @Chuanying.json | 11 +- .../Generic PETG-CF10 @Chuanying.json | 5 +- .../filament/Generic PLA-CF10 @Chuanying.json | 11 +- .../filament/Generic PVA @Chuanying.json | 8 +- .../filament/Generic TPU @Chuanying.json | 5 +- .../Chuanying/machine/Chuanying X1.json | 2 +- .../machine/fdm_chuanying_common.json | 1 - .../Chuanying/machine/fdm_klipper_common.json | 2 - .../Chuanying/machine/fdm_machine_common.json | 2 - .../process/fdm_process_chuanying_0.20.json | 1 - .../process/fdm_process_chuanying_0.30.json | 1 - .../process/fdm_process_chuanying_common.json | 1 - .../Chuanying/process/fdm_process_common.json | 1 - resources/profiles/Co Print.json | 2 +- .../filament/Generic PLA @CoPrint.json | 8 +- .../Co Print/filament/fdm_filament_pla.json | 6 - .../Co Print/machine/fdm_machine_common.json | 1 - .../Co Print/process/fdm_process_common.json | 1 - .../process/fdm_process_coprint_common.json | 1 - resources/profiles/CoLiDo.json | 2 +- .../CoLiDo/filament/fdm_filament_pla.json | 6 - .../machine/CoLiDo 160 V2 0.4 nozzle.json | 1 - .../machine/CoLiDo DIY 4.0 0.4 nozzle.json | 1 - .../CoLiDo/machine/CoLiDo X16 0.4 nozzle.json | 1 - .../CoLiDo/machine/fdm_klipper_common.json | 3 +- .../CoLiDo/machine/fdm_machine_common.json | 1 - .../process/fdm_process_colido_common.json | 1 - .../fdm_process_colidodiy40_common.json | 1 - .../fdm_process_colidodiy40v2_common.json | 2 - .../process/fdm_process_colidosr1_common.json | 2 - .../process/fdm_process_colidox16_common.json | 1 - .../CoLiDo/process/fdm_process_common.json | 3 - resources/profiles/Comgrow.json | 2 +- .../Comgrow/machine/fdm_comgrow_common.json | 1 - .../Comgrow/machine/fdm_machine_common.json | 1 - .../0.16mm Opitmal @Comgrow T500 0.6.json | 1 - .../0.16mm Optimal @Comgrow T500 0.4.json | 1 - .../process/0.18mm Optimal @Comgrow T500.json | 1 - ... Optimal @Comgrow T300 0.4 - official.json | 1 - .../0.20mm Standard @Comgrow T500 0.4.json | 1 - .../0.20mm Standard @Comgrow T500 0.6.json | 1 - .../0.20mm Standard @Comgrow T500.json | 1 - .../0.24mm Draft @Comgrow T500 0.4.json | 1 - .../0.24mm Draft @Comgrow T500 0.6.json | 1 - .../0.24mm Optimal @Comgrow T500 0.8.json | 1 - .../0.28mm SuperDraft @Comgrow T500 0.4.json | 1 - .../0.28mm SuperDraft @Comgrow T500 0.6.json | 1 - .../0.32mm Standard @Comgrow T500 0.8.json | 1 - .../0.40mm Draft @Comgrow T500 0.8.json | 1 - .../0.48mm Draft @Comgrow T500 0.8.json | 1 - .../0.56mm SuperDraft @Comgrow T500 0.8.json | 1 - .../process/fdm_process_comgrow_common.json | 1 - .../Comgrow/process/fdm_process_common.json | 1 - resources/profiles/Creality.json | 2 +- .../filament/CR-ABS @Ender-3 V4-all.json | 350 +++++----- .../Creality/filament/CR-ABS @Hi-all.json | 332 +++++---- .../filament/CR-ABS @K1 Max_CFS-C-all.json | 308 +++++---- .../Creality/filament/CR-ABS @K1 SE-all.json | 344 +++++----- .../filament/CR-ABS @K1 SE_CFS-C-all.json | 344 +++++----- .../Creality/filament/CR-ABS @K1C-all.json | 308 +++++---- .../filament/CR-ABS @K1C_CFS-C-all.json | 308 +++++---- .../filament/CR-ABS @K1_CFS-C-all.json | 308 +++++---- .../filament/CR-ABS @K2 Plus-all.json | 318 +++++---- .../Creality/filament/CR-ABS @K2 Pro-all.json | 326 +++++---- .../Creality/filament/CR-ABS @K2 SE-all.json | 354 +++++----- .../Creality/filament/CR-ABS @K2-all.json | 322 +++++---- .../filament/CR-Nylon @K1 Max_CFS-C-all.json | 378 +++++----- .../Creality/filament/CR-Nylon @K1C-all.json | 380 +++++------ .../filament/CR-Nylon @K1C_CFS-C-all.json | 380 +++++------ .../filament/CR-Nylon @K1_CFS-C-all.json | 380 +++++------ .../filament/CR-Nylon @K2 Plus-all.json | 392 ++++++----- .../filament/CR-PETG @Ender-3 V4-all.json | 296 ++++---- .../Creality/filament/CR-PETG @Hi-all.json | 300 ++++---- .../filament/CR-PETG @K1 Max_CFS-C-all.json | 310 +++++---- .../Creality/filament/CR-PETG @K1 SE-all.json | 278 ++++---- .../filament/CR-PETG @K1 SE_CFS-C-all.json | 278 ++++---- .../Creality/filament/CR-PETG @K1C-all.json | 318 +++++---- .../filament/CR-PETG @K1C_CFS-C-all.json | 314 +++++---- .../filament/CR-PETG @K1_CFS-C-all.json | 310 +++++---- .../filament/CR-PETG @K2 Plus-all.json | 288 ++++---- .../filament/CR-PETG @K2 Pro-all.json | 312 +++++---- .../Creality/filament/CR-PETG @K2 SE-all.json | 318 +++++---- .../Creality/filament/CR-PETG @K2-all.json | 312 +++++---- .../filament/CR-PETG @SPARKX i7-all.json | 274 ++++---- .../filament/CR-PLA @Ender-3 V4-all.json | 296 ++++---- .../Creality/filament/CR-PLA @Hi-all.json | 278 ++++---- .../filament/CR-PLA @K1 Max_CFS-C-all.json | 308 +++++---- .../Creality/filament/CR-PLA @K1 SE-all.json | 278 ++++---- .../filament/CR-PLA @K1 SE_CFS-C-all.json | 278 ++++---- .../Creality/filament/CR-PLA @K1C-all.json | 310 +++++---- .../filament/CR-PLA @K1C_CFS-C-all.json | 310 +++++---- .../filament/CR-PLA @K1_CFS-C-all.json | 310 +++++---- .../filament/CR-PLA @K2 Plus-all.json | 312 +++++---- .../Creality/filament/CR-PLA @K2 Pro-all.json | 324 +++++---- .../Creality/filament/CR-PLA @K2 SE-all.json | 282 ++++---- .../Creality/filament/CR-PLA @K2-all.json | 324 +++++---- .../filament/CR-PLA @SPARKX i7-all.json | 330 +++++---- .../CR-PLA Carbon @K1 Max_CFS-C-all.json | 324 +++++---- .../filament/CR-PLA Carbon @K1C-all.json | 324 +++++---- .../CR-PLA Carbon @K1C_CFS-C-all.json | 324 +++++---- .../filament/CR-PLA Carbon @K1_CFS-C-all.json | 324 +++++---- .../filament/CR-PLA Carbon @K2 Plus-all.json | 324 +++++---- .../CR-PLA Fluo @K1 Max_CFS-C-all.json | 308 +++++---- .../filament/CR-PLA Fluo @K1C-all.json | 310 +++++---- .../filament/CR-PLA Fluo @K1C_CFS-C-all.json | 310 +++++---- .../filament/CR-PLA Fluo @K1_CFS-C-all.json | 310 +++++---- .../filament/CR-PLA Fluo @K2 Plus-all.json | 312 +++++---- .../filament/CR-PLA Fluo @K2 Pro-all.json | 318 +++++---- .../filament/CR-PLA Fluo @K2-all.json | 318 +++++---- .../filament/CR-PLA Fluo @SPARKX i7-all.json | 318 +++++---- .../CR-PLA Matte @Ender-3 V4-all.json | 302 ++++---- .../CR-PLA Matte @K1 Max_CFS-C-all.json | 318 +++++---- .../filament/CR-PLA Matte @K1C-all.json | 318 +++++---- .../filament/CR-PLA Matte @K1C_CFS-C-all.json | 318 +++++---- .../filament/CR-PLA Matte @K1_CFS-C-all.json | 318 +++++---- .../filament/CR-PLA Matte @K2 Plus-all.json | 318 +++++---- .../filament/CR-PLA Matte @K2 Pro-all.json | 324 +++++---- .../filament/CR-PLA Matte @K2-all.json | 324 +++++---- .../filament/CR-PLA Matte @SPARKX i7-all.json | 336 +++++---- .../filament/CR-Silk @Ender-3 V4-all.json | 296 ++++---- .../Creality/filament/CR-Silk @Hi-all.json | 286 ++++---- .../filament/CR-Silk @K1 Max_CFS-C-all.json | 316 +++++---- .../Creality/filament/CR-Silk @K1 SE-all.json | 290 ++++---- .../filament/CR-Silk @K1 SE_CFS-C-all.json | 290 ++++---- .../Creality/filament/CR-Silk @K1C-all.json | 320 +++++---- .../filament/CR-Silk @K1C_CFS-C-all.json | 316 +++++---- .../filament/CR-Silk @K1_CFS-C-all.json | 316 +++++---- .../filament/CR-Silk @K2 Plus-all.json | 330 +++++---- .../filament/CR-Silk @K2 Pro-all.json | 326 +++++---- .../Creality/filament/CR-Silk @K2 SE-all.json | 288 ++++---- .../Creality/filament/CR-Silk @K2-all.json | 326 +++++---- .../filament/CR-Silk @SPARKX i7-all.json | 344 +++++----- .../filament/CR-TPU @K1 Max_CFS-C-all.json | 338 +++++---- .../Creality/filament/CR-TPU @K1C-all.json | 338 +++++---- .../filament/CR-TPU @K1C_CFS-C-all.json | 338 +++++---- .../filament/CR-TPU @K1_CFS-C-all.json | 338 +++++---- .../filament/CR-TPU @K2 Plus-all.json | 336 +++++---- .../Creality/filament/CR-TPU @K2 Pro-all.json | 346 +++++----- .../Creality/filament/CR-TPU @K2-all.json | 346 +++++----- .../filament/CR-TPU @SPARKX i7-all.json | 354 +++++----- .../filament/CR-Wood @K1 Max_CFS-C-all.json | 314 +++++---- .../Creality/filament/CR-Wood @K1C-all.json | 316 +++++---- .../filament/CR-Wood @K1C_CFS-C-all.json | 316 +++++---- .../filament/CR-Wood @K1_CFS-C-all.json | 316 +++++---- .../filament/CR-Wood @K2 Plus-all.json | 318 +++++---- .../Creality Hyper ABS @Ender-5Max-all.json | 2 - .../Creality Hyper PLA @Ender-5Max-all.json | 2 - ...Creality Hyper PLA-CF @Ender-5Max-all.json | 2 - .../Creality Silk PLA @Ender-5Max-all.json | 2 - .../filament/EN-PLA+ @K1 Max_CFS-C-all.json | 312 +++++---- .../Creality/filament/EN-PLA+ @K1C-all.json | 312 +++++---- .../filament/EN-PLA+ @K1C_CFS-C-all.json | 312 +++++---- .../filament/EN-PLA+ @K1_CFS-C-all.json | 312 +++++---- .../filament/EN-PLA+ @K2 Plus-all.json | 306 +++++---- .../filament/EN-PLA+ @K2 Pro-all.json | 318 +++++---- .../Creality/filament/EN-PLA+ @K2-all.json | 318 +++++---- .../filament/EN-PLA+ @SPARKX i7-all.json | 336 +++++---- .../filament/ENDER FAST PLA @Hi-all.json | 288 ++++---- .../filament/ENDER FAST PLA @K2 Plus-all.json | 332 +++++---- .../filament/ENDER FAST PLA @K2 Pro-all.json | 326 +++++---- .../filament/ENDER FAST PLA @K2-all.json | 326 +++++---- .../ENDER FAST PLA @SPARKX i7-all.json | 348 +++++----- .../filament/Ender-PLA @Ender-3 V4-all.json | 290 ++++---- .../Creality/filament/Ender-PLA @Hi-all.json | 310 +++++---- .../filament/Ender-PLA @K1 Max_CFS-C-all.json | 306 +++++---- .../Creality/filament/Ender-PLA @K1C-all.json | 306 +++++---- .../filament/Ender-PLA @K1C_CFS-C-all.json | 306 +++++---- .../filament/Ender-PLA @K1_CFS-C-all.json | 306 +++++---- .../filament/Ender-PLA @K2 Plus-all.json | 300 ++++---- .../filament/Ender-PLA @K2 Pro-all.json | 312 +++++---- .../Creality/filament/Ender-PLA @K2-all.json | 312 +++++---- .../filament/Ender-PLA @SPARKX i7-all.json | 330 +++++---- .../Generic ABS @Creality Ender-5Max-all.json | 4 +- .../filament/Generic ABS @Ender-3 V4-all.json | 338 +++++---- .../filament/Generic ABS @Hi-all.json | 332 +++++---- .../Generic ABS @K1 Max_CFS-C-all.json | 296 ++++---- .../filament/Generic ABS @K1 SE-all.json | 332 +++++---- .../Generic ABS @K1 SE_CFS-C-all.json | 332 +++++---- .../filament/Generic ABS @K1C-all.json | 296 ++++---- .../filament/Generic ABS @K1C_CFS-C-all.json | 296 ++++---- .../filament/Generic ABS @K1_CFS-C-all.json | 296 ++++---- .../filament/Generic ABS @K2 Plus-all.json | 312 +++++---- .../filament/Generic ABS @K2 Pro-all.json | 310 +++++---- .../filament/Generic ABS @K2 SE-all.json | 354 +++++----- .../filament/Generic ABS @K2-all.json | 322 +++++---- .../Generic ASA @Creality Ender-5Max-all.json | 4 +- .../Generic ASA @K1 Max_CFS-C-all.json | 314 +++++---- .../filament/Generic ASA @K1 SE-all.json | 338 +++++---- .../Generic ASA @K1 SE_CFS-C-all.json | 338 +++++---- .../filament/Generic ASA @K1C-all.json | 314 +++++---- .../filament/Generic ASA @K1C_CFS-C-all.json | 314 +++++---- .../filament/Generic ASA @K1_CFS-C-all.json | 314 +++++---- .../filament/Generic ASA @K2 Plus-all.json | 314 +++++---- .../filament/Generic ASA @K2 Pro-all.json | 316 +++++---- .../filament/Generic ASA @K2 SE-all.json | 348 +++++----- .../filament/Generic ASA @K2-all.json | 334 +++++---- .../filament/Generic ASA-CF @K2 Plus-all.json | 292 ++++---- .../filament/Generic BVOH @Hi-all.json | 258 ++++--- .../Generic BVOH @K1 Max_CFS-C-all.json | 320 +++++---- .../filament/Generic BVOH @K1C-all.json | 322 +++++---- .../filament/Generic BVOH @K1C_CFS-C-all.json | 322 +++++---- .../filament/Generic BVOH @K1_CFS-C-all.json | 322 +++++---- .../filament/Generic BVOH @K2 Plus-all.json | 284 ++++---- .../filament/Generic BVOH @K2 Pro-all.json | 284 ++++---- .../filament/Generic BVOH @K2-all.json | 284 ++++---- .../Generic HIPS @K1 Max_CFS-C-all.json | 342 +++++----- .../filament/Generic HIPS @K1C-all.json | 344 +++++----- .../filament/Generic HIPS @K1C_CFS-C-all.json | 344 +++++----- .../filament/Generic HIPS @K1_CFS-C-all.json | 344 +++++----- .../filament/Generic HIPS @K2 Plus-all.json | 284 ++++---- .../Generic PA @Creality Ender-5Max-all.json | 4 +- .../Generic PA @K1 Max_CFS-C-all.json | 330 +++++---- .../filament/Generic PA @K1C-all.json | 332 +++++---- .../filament/Generic PA @K1C_CFS-C-all.json | 332 +++++---- .../filament/Generic PA @K1_CFS-C-all.json | 332 +++++---- .../filament/Generic PA @K2 Plus-all.json | 362 +++++----- .../filament/Generic PA @K2 Pro-all.json | 388 ++++++----- .../Creality/filament/Generic PA @K2-all.json | 388 ++++++----- .../Generic PA-CF @K1 Max_CFS-C-all.json | 300 ++++---- .../filament/Generic PA-CF @K1C-all.json | 302 ++++---- .../Generic PA-CF @K1C_CFS-C-all.json | 302 ++++---- .../filament/Generic PA-CF @K1_CFS-C-all.json | 302 ++++---- .../filament/Generic PA-CF @K2 Plus-all.json | 360 +++++----- .../Generic PA12-CF @K2 Plus-all.json | 360 +++++----- .../Generic PA6-CF @K1 Max_CFS-C-all.json | 372 +++++----- .../filament/Generic PA6-CF @K1C-all.json | 374 +++++----- .../Generic PA6-CF @K1C_CFS-C-all.json | 374 +++++----- .../Generic PA6-CF @K1_CFS-C-all.json | 374 +++++----- .../filament/Generic PA6-CF @K2 Plus-all.json | 378 +++++----- .../filament/Generic PA6-CF @K2 Pro-all.json | 382 ++++++----- .../filament/Generic PA6-GF @K2 Plus-all.json | 302 ++++---- .../Generic PA612-CF @K2 Plus-all.json | 360 +++++----- .../Generic PA612-CF @K2 Pro-all.json | 364 +++++----- .../Generic PAHT-CF @K1 Max_CFS-C-all.json | 390 ++++++----- .../filament/Generic PAHT-CF @K1C-all.json | 392 ++++++----- .../Generic PAHT-CF @K1C_CFS-C-all.json | 392 ++++++----- .../Generic PAHT-CF @K1_CFS-C-all.json | 392 ++++++----- .../Generic PAHT-CF @K2 Plus-all.json | 390 ++++++----- .../filament/Generic PAHT-CF @K2 Pro-all.json | 364 +++++----- .../filament/Generic PAHT-CF @K2-all.json | 364 +++++----- .../Generic PC @K1 Max_CFS-C-all.json | 326 +++++---- .../filament/Generic PC @K1C-all.json | 326 +++++---- .../filament/Generic PC @K1C_CFS-C-all.json | 326 +++++---- .../filament/Generic PC @K1_CFS-C-all.json | 326 +++++---- .../filament/Generic PC @K2 Plus-all.json | 326 +++++---- .../filament/Generic PC @K2 Pro-all.json | 334 +++++---- .../filament/Generic PCTG @K2 Plus-all.json | 296 ++++---- .../Generic PET @K1 Max_CFS-C-all.json | 372 +++++----- .../filament/Generic PET @K1C-all.json | 374 +++++----- .../filament/Generic PET @K1C_CFS-C-all.json | 374 +++++----- .../filament/Generic PET @K1_CFS-C-all.json | 374 +++++----- .../filament/Generic PET @K2 Plus-all.json | 380 +++++------ .../filament/Generic PET @K2 Pro-all.json | 382 ++++++----- .../filament/Generic PET @K2-all.json | 382 ++++++----- .../Generic PET-CF @K1 Max_CFS-C-all.json | 348 +++++----- .../filament/Generic PET-CF @K1C-all.json | 350 +++++----- .../Generic PET-CF @K1C_CFS-C-all.json | 350 +++++----- .../Generic PET-CF @K1_CFS-C-all.json | 350 +++++----- .../filament/Generic PET-CF @K2 Plus-all.json | 386 ++++++----- .../filament/Generic PET-CF @K2 Pro-all.json | 382 ++++++----- ...Generic PETG @Creality Ender-5Max-all.json | 4 +- .../Generic PETG @Ender-3 V4-all.json | 296 ++++---- .../filament/Generic PETG @Hi-all.json | 298 ++++---- .../Generic PETG @K1 Max_CFS-C-all.json | 308 +++++---- .../filament/Generic PETG @K1 SE-all.json | 284 ++++---- .../Generic PETG @K1 SE_CFS-C-all.json | 284 ++++---- .../filament/Generic PETG @K1C-all.json | 308 +++++---- .../filament/Generic PETG @K1C_CFS-C-all.json | 308 +++++---- .../filament/Generic PETG @K1_CFS-C-all.json | 308 +++++---- .../filament/Generic PETG @K2 Plus-all.json | 280 ++++---- .../filament/Generic PETG @K2 Pro-all.json | 302 ++++---- .../filament/Generic PETG @K2 SE-all.json | 300 ++++---- .../filament/Generic PETG @K2-all.json | 302 ++++---- .../filament/Generic PETG @SPARKX i7-all.json | 322 +++++---- .../Generic PETG-CF @K1 Max_CFS-C-all.json | 330 +++++---- .../filament/Generic PETG-CF @K1C-all.json | 332 +++++---- .../Generic PETG-CF @K1C_CFS-C-all.json | 332 +++++---- .../Generic PETG-CF @K1_CFS-C-all.json | 332 +++++---- .../Generic PETG-CF @K2 Plus-all.json | 294 ++++---- .../filament/Generic PETG-CF @K2 Pro-all.json | 282 ++++---- .../filament/Generic PETG-CF @K2-all.json | 276 ++++---- .../Generic PETG-CF @SPARKX i7-all.json | 326 +++++---- .../Generic PETG-GF @K2 Plus-all.json | 300 ++++---- .../filament/Generic PETG-GF @K2 Pro-all.json | 282 ++++---- .../filament/Generic PETG-GF @K2-all.json | 288 ++++---- .../Generic PLA @Creality Ender-5Max-all.json | 4 +- .../Generic PLA @Creality Hi-all.json | 8 +- .../filament/Generic PLA @Ender-3 V4-all.json | 284 ++++---- .../filament/Generic PLA @Hi-all.json | 280 ++++---- .../Generic PLA @K1 Max_CFS-C-all.json | 316 +++++---- .../filament/Generic PLA @K1 SE-all.json | 278 ++++---- .../Generic PLA @K1 SE_CFS-C-all.json | 278 ++++---- .../filament/Generic PLA @K1C-all.json | 316 +++++---- .../filament/Generic PLA @K1C_CFS-C-all.json | 316 +++++---- .../filament/Generic PLA @K1_CFS-C-all.json | 316 +++++---- .../filament/Generic PLA @K2 Plus-all.json | 328 +++++---- .../filament/Generic PLA @K2 Pro-all.json | 314 +++++---- .../filament/Generic PLA @K2 SE-all.json | 276 ++++---- .../filament/Generic PLA @K2-all.json | 320 +++++---- .../filament/Generic PLA @SPARKX i7-all.json | 328 +++++---- .../Generic PLA-CF @Ender-3 V4-all.json | 308 +++++---- .../Generic PLA-CF @K1 Max_CFS-C-all.json | 328 +++++---- .../filament/Generic PLA-CF @K1 SE-all.json | 296 ++++---- .../Generic PLA-CF @K1 SE_CFS-C-all.json | 296 ++++---- .../filament/Generic PLA-CF @K1C-all.json | 328 +++++---- .../Generic PLA-CF @K1C_CFS-C-all.json | 328 +++++---- .../Generic PLA-CF @K1_CFS-C-all.json | 328 +++++---- .../filament/Generic PLA-CF @K2 Plus-all.json | 332 +++++---- .../filament/Generic PLA-CF @K2 Pro-all.json | 328 +++++---- .../filament/Generic PLA-CF @K2 SE-all.json | 288 ++++---- .../filament/Generic PLA-CF @K2-all.json | 328 +++++---- .../Generic PLA-CF @SPARKX i7-all.json | 362 +++++----- .../Generic PLA-Silk @Ender-3 V4-all.json | 290 ++++---- .../filament/Generic PLA-Silk @Hi-all.json | 284 ++++---- .../Generic PLA-Silk @K1 Max_CFS-C-all.json | 318 +++++---- .../filament/Generic PLA-Silk @K1 SE-all.json | 284 ++++---- .../Generic PLA-Silk @K1 SE_CFS-C-all.json | 284 ++++---- .../filament/Generic PLA-Silk @K1C-all.json | 322 +++++---- .../Generic PLA-Silk @K1C_CFS-C-all.json | 318 +++++---- .../Generic PLA-Silk @K1_CFS-C-all.json | 318 +++++---- .../Generic PLA-Silk @K2 Plus-all.json | 318 +++++---- .../Generic PLA-Silk @K2 Pro-all.json | 326 +++++---- .../filament/Generic PLA-Silk @K2 SE-all.json | 270 ++++---- .../filament/Generic PLA-Silk @K2-all.json | 320 +++++---- .../Generic PLA-Silk @SPARKX i7-all.json | 330 +++++---- .../Generic PP @K1 Max_CFS-C-all.json | 312 +++++---- .../filament/Generic PP @K1C-all.json | 314 +++++---- .../filament/Generic PP @K1C_CFS-C-all.json | 314 +++++---- .../filament/Generic PP @K1_CFS-C-all.json | 314 +++++---- .../filament/Generic PP @K2 Plus-all.json | 284 ++++---- .../filament/Generic PP @K2 Pro-all.json | 280 ++++---- .../Creality/filament/Generic PP @K2-all.json | 280 ++++---- .../filament/Generic PP-CF @K2 Plus-all.json | 296 ++++---- .../Generic PPS @K1 Max_CFS-C-all.json | 342 +++++----- .../filament/Generic PPS @K1C-all.json | 344 +++++----- .../filament/Generic PPS @K1C_CFS-C-all.json | 344 +++++----- .../filament/Generic PPS @K1_CFS-C-all.json | 344 +++++----- .../filament/Generic PPS @K2 Plus-all.json | 298 ++++---- .../Generic PPS-CF @K1 Max_CFS-C-all.json | 342 +++++----- .../filament/Generic PPS-CF @K1C-all.json | 344 +++++----- .../Generic PPS-CF @K1C_CFS-C-all.json | 344 +++++----- .../Generic PPS-CF @K1_CFS-C-all.json | 344 +++++----- .../filament/Generic PPS-CF @K2 Plus-all.json | 284 ++++---- .../filament/Generic PVA @Hi-all.json | 268 ++++---- .../Generic PVA @K1 Max_CFS-C-all.json | 252 ++++--- .../filament/Generic PVA @K1C-all.json | 254 ++++--- .../filament/Generic PVA @K1C_CFS-C-all.json | 254 ++++--- .../filament/Generic PVA @K1_CFS-C-all.json | 254 ++++--- .../filament/Generic PVA @K2 Plus-all.json | 288 ++++---- .../filament/Generic PVA @K2 Pro-all.json | 282 ++++---- .../filament/Generic PVA @K2-all.json | 282 ++++---- .../Generic Support for PA @K2 Plus-all.json | 354 +++++----- .../Generic Support for PLA @K2 Plus-all.json | 320 +++++---- .../Generic TPU 64D @K2 Plus-all.json | 344 +++++----- .../Generic TPU 64D @SPARKX i7-all.json | 366 +++++----- .../Generic TPU @Creality Ender-5Max-all.json | 4 +- .../filament/Generic TPU @Ender-3 V4-all.json | 326 +++++---- .../Generic TPU @K1 Max_CFS-C-all.json | 296 ++++---- .../filament/Generic TPU @K1 SE-all.json | 314 +++++---- .../Generic TPU @K1 SE_CFS-C-all.json | 314 +++++---- .../filament/Generic TPU @K1C-all.json | 298 ++++---- .../filament/Generic TPU @K1C_CFS-C-all.json | 298 ++++---- .../filament/Generic TPU @K1_CFS-C-all.json | 298 ++++---- .../filament/Generic TPU @K2 Plus-all.json | 318 +++++---- .../filament/Generic TPU @K2 Pro-all.json | 328 +++++---- .../filament/Generic TPU @K2 SE-all.json | 312 +++++---- .../filament/Generic TPU @K2-all.json | 328 +++++---- .../filament/Generic TPU @SPARKX i7-all.json | 340 +++++---- .../HP Ultra PLA @K1 Max_CFS-C-all.json | 314 +++++---- .../filament/HP Ultra PLA @K1C-all.json | 316 +++++---- .../filament/HP Ultra PLA @K1C_CFS-C-all.json | 316 +++++---- .../filament/HP Ultra PLA @K1_CFS-C-all.json | 316 +++++---- .../filament/HP Ultra PLA @K2 Plus-all.json | 312 +++++---- .../filament/HP-ASA @K1 Max_CFS-C-all.json | 338 +++++---- .../Creality/filament/HP-ASA @K1C-all.json | 338 +++++---- .../filament/HP-ASA @K1C_CFS-C-all.json | 338 +++++---- .../filament/HP-ASA @K1_CFS-C-all.json | 338 +++++---- .../filament/HP-ASA @K2 Plus-all.json | 354 +++++----- .../Creality/filament/HP-ASA @K2 Pro-all.json | 328 +++++---- .../Creality/filament/HP-ASA @K2 SE-all.json | 348 +++++----- .../Creality/filament/HP-ASA @K2-all.json | 328 +++++---- .../filament/HP-TPU @Ender-3 V4-all.json | 344 +++++----- .../Creality/filament/HP-TPU @Hi-all.json | 332 +++++---- .../filament/HP-TPU @K1 Max_CFS-C-all.json | 328 +++++---- .../Creality/filament/HP-TPU @K1 SE-all.json | 326 +++++---- .../filament/HP-TPU @K1 SE_CFS-C-all.json | 326 +++++---- .../Creality/filament/HP-TPU @K1C-all.json | 332 +++++---- .../filament/HP-TPU @K1C_CFS-C-all.json | 328 +++++---- .../filament/HP-TPU @K1_CFS-C-all.json | 328 +++++---- .../filament/HP-TPU @K2 Plus-all.json | 340 +++++---- .../Creality/filament/HP-TPU @K2 Pro-all.json | 344 +++++----- .../Creality/filament/HP-TPU @K2 SE-all.json | 348 +++++----- .../Creality/filament/HP-TPU @K2-all.json | 334 +++++---- .../filament/HP-TPU @SPARKX i7-all.json | 362 +++++----- .../filament/Hyper ABS @Ender-3 V4-all.json | 344 +++++----- .../Creality/filament/Hyper ABS @Hi-all.json | 344 +++++----- .../filament/Hyper ABS @K1 Max_CFS-C-all.json | 334 +++++---- .../filament/Hyper ABS @K1 SE-all.json | 344 +++++----- .../filament/Hyper ABS @K1 SE_CFS-C-all.json | 344 +++++----- .../Creality/filament/Hyper ABS @K1C-all.json | 336 +++++---- .../filament/Hyper ABS @K1C_CFS-C-all.json | 332 +++++---- .../filament/Hyper ABS @K1_CFS-C-all.json | 334 +++++---- .../filament/Hyper ABS @K2 Plus-all.json | 330 +++++---- .../filament/Hyper ABS @K2 Pro-all.json | 334 +++++---- .../filament/Hyper ABS @K2 SE-all.json | 348 +++++----- .../Creality/filament/Hyper ABS @K2-all.json | 330 +++++---- .../filament/Hyper L-W PLA @Hi-all.json | 294 ++++---- .../Hyper L-W PLA @K1 Max_CFS-C-all.json | 336 +++++---- .../filament/Hyper L-W PLA @K1 SE-all.json | 292 ++++---- .../Hyper L-W PLA @K1 SE_CFS-C-all.json | 292 ++++---- .../filament/Hyper L-W PLA @K1C-all.json | 328 +++++---- .../Hyper L-W PLA @K1C_CFS-C-all.json | 328 +++++---- .../filament/Hyper L-W PLA @K1_CFS-C-all.json | 328 +++++---- .../filament/Hyper L-W PLA @K2 Plus-all.json | 332 +++++---- .../filament/Hyper L-W PLA @K2 Pro-all.json | 334 +++++---- .../filament/Hyper L-W PLA @K2-all.json | 334 +++++---- .../filament/Hyper Luminous @Hi-all.json | 276 ++++---- .../filament/Hyper Luminous @K1C-all.json | 330 +++++---- .../filament/Hyper Luminous @K2 Plus-all.json | 324 +++++---- .../filament/Hyper Luminous @K2 Pro-all.json | 324 +++++---- .../filament/Hyper Luminous @K2-all.json | 324 +++++---- .../Hyper Luminous @SPARKX i7-all.json | 362 +++++----- .../filament/Hyper Marble @Hi-all.json | 314 +++++---- .../Hyper Marble @K1 Max_CFS-C-all.json | 324 +++++---- .../filament/Hyper Marble @K1C-all.json | 324 +++++---- .../filament/Hyper Marble @K1C_CFS-C-all.json | 324 +++++---- .../filament/Hyper Marble @K1_CFS-C-all.json | 324 +++++---- .../filament/Hyper Marble @K2 Plus-all.json | 324 +++++---- .../filament/Hyper Marble @K2 Pro-all.json | 324 +++++---- .../filament/Hyper Marble @K2 SE-all.json | 288 ++++---- .../filament/Hyper Marble @K2-all.json | 324 +++++---- .../filament/Hyper Marble @SPARKX i7-all.json | 348 +++++----- .../filament/Hyper PA6-CF @K2 Plus-all.json | 394 ++++++----- .../filament/Hyper PA6-CF @K2 Pro-all.json | 394 ++++++----- .../filament/Hyper PA612-CF @K2 Plus-all.json | 382 ++++++----- .../filament/Hyper PA612-CF @K2 Pro-all.json | 382 ++++++----- .../Hyper PAHT-CF @K1 Max_CFS-C-all.json | 388 ++++++----- .../filament/Hyper PAHT-CF @K1C-all.json | 390 ++++++----- .../Hyper PAHT-CF @K1C_CFS-C-all.json | 390 ++++++----- .../filament/Hyper PAHT-CF @K1_CFS-C-all.json | 390 ++++++----- .../filament/Hyper PAHT-CF @K2 Plus-all.json | 384 ++++++----- .../filament/Hyper PAHT-CF @K2 Pro-all.json | 364 +++++----- .../filament/Hyper PAHT-CF @K2-all.json | 364 +++++----- .../filament/Hyper PC @K2 Plus-all.json | 338 +++++---- .../filament/Hyper PC @K2 Pro-all.json | 342 +++++----- .../filament/Hyper PETG @Ender-3 V4-all.json | 296 ++++---- .../Creality/filament/Hyper PETG @Hi-all.json | 294 ++++---- .../Hyper PETG @K1 Max_CFS-C-all.json | 302 ++++---- .../filament/Hyper PETG @K1 SE-all.json | 308 +++++---- .../filament/Hyper PETG @K1 SE_CFS-C-all.json | 308 +++++---- .../filament/Hyper PETG @K1C-all.json | 306 +++++---- .../filament/Hyper PETG @K1C_CFS-C-all.json | 302 ++++---- .../filament/Hyper PETG @K1_CFS-C-all.json | 308 +++++---- .../filament/Hyper PETG @K2 Plus-all.json | 294 ++++---- .../filament/Hyper PETG @K2 Pro-all.json | 296 ++++---- .../filament/Hyper PETG @K2 SE-all.json | 312 +++++---- .../Creality/filament/Hyper PETG @K2-all.json | 292 ++++---- .../filament/Hyper PETG @SPARKX i7-all.json | 324 +++++---- .../Hyper PETG-CF @K1 Max_CFS-C-all.json | 276 ++++---- .../filament/Hyper PETG-CF @K1C-all.json | 274 ++++---- .../Hyper PETG-CF @K1C_CFS-C-all.json | 274 ++++---- .../filament/Hyper PETG-CF @K1_CFS-C-all.json | 276 ++++---- .../filament/Hyper PETG-CF @K2 Plus-all.json | 280 ++++---- .../filament/Hyper PETG-CF @K2 Pro-all.json | 282 ++++---- .../filament/Hyper PETG-CF @K2-all.json | 282 ++++---- .../Hyper PETG-CF @SPARKX i7-all.json | 330 +++++---- .../filament/Hyper PETG-GF @K1C-all.json | 294 ++++---- .../filament/Hyper PETG-GF @K2 Plus-all.json | 282 ++++---- .../filament/Hyper PETG-GF @K2 Pro-all.json | 282 ++++---- .../filament/Hyper PETG-GF @K2-all.json | 282 ++++---- .../filament/Hyper PLA @Ender-3 V4-all.json | 296 ++++---- .../Creality/filament/Hyper PLA @Hi-all.json | 288 ++++---- .../filament/Hyper PLA @K1 Max_CFS-C-all.json | 314 +++++---- .../filament/Hyper PLA @K1 SE-all.json | 276 ++++---- .../filament/Hyper PLA @K1 SE_CFS-C-all.json | 272 ++++---- .../Creality/filament/Hyper PLA @K1C-all.json | 318 +++++---- .../filament/Hyper PLA @K1C_CFS-C-all.json | 314 +++++---- .../filament/Hyper PLA @K1_CFS-C-all.json | 314 +++++---- .../filament/Hyper PLA @K2 Plus-all.json | 314 +++++---- .../filament/Hyper PLA @K2 Pro-all.json | 318 +++++---- .../filament/Hyper PLA @K2 SE-all.json | 276 ++++---- .../Creality/filament/Hyper PLA @K2-all.json | 314 +++++---- .../filament/Hyper PLA @SPARKX i7-all.json | 332 +++++---- .../Hyper PLA-CF @Ender-3 V4-all.json | 308 +++++---- .../filament/Hyper PLA-CF @Hi-all.json | 326 +++++---- .../Hyper PLA-CF @K1 Max_CFS-C-all.json | 308 +++++---- .../filament/Hyper PLA-CF @K1 SE-all.json | 296 ++++---- .../Hyper PLA-CF @K1 SE_CFS-C-all.json | 296 ++++---- .../filament/Hyper PLA-CF @K1C-all.json | 310 +++++---- .../filament/Hyper PLA-CF @K1C_CFS-C-all.json | 310 +++++---- .../filament/Hyper PLA-CF @K1_CFS-C-all.json | 310 +++++---- .../filament/Hyper PLA-CF @K2 Plus-all.json | 328 +++++---- .../filament/Hyper PLA-CF @K2 Pro-all.json | 328 +++++---- .../filament/Hyper PLA-CF @K2 SE-all.json | 294 ++++---- .../filament/Hyper PLA-CF @K2-all.json | 328 +++++---- .../filament/Hyper PLA-CF @SPARKX i7-all.json | 348 +++++----- .../filament/Hyper PPA-CF @K2 Plus-all.json | 366 +++++----- .../filament/Hyper PPA-CF @K2 Pro-all.json | 358 +++++----- .../filament/Hyper Stardust @Hi-all.json | 308 +++++---- .../Hyper Stardust @K1 Max_CFS-C-all.json | 318 +++++---- .../filament/Hyper Stardust @K1C-all.json | 318 +++++---- .../Hyper Stardust @K1C_CFS-C-all.json | 318 +++++---- .../Hyper Stardust @K1_CFS-C-all.json | 318 +++++---- .../filament/Hyper Stardust @K2 Plus-all.json | 318 +++++---- .../filament/Hyper Stardust @K2 Pro-all.json | 318 +++++---- .../filament/Hyper Stardust @K2 SE-all.json | 282 ++++---- .../filament/Hyper Stardust @K2-all.json | 318 +++++---- .../Hyper Stardust @SPARKX i7-all.json | 354 +++++----- .../Panchroma PLA Matte @K2 Plus-all.json | 334 +++++---- .../Panchroma PLA Satin @K2 Plus-all.json | 328 +++++---- .../filament/PolySonic PLA @K2 Plus-all.json | 340 +++++---- .../PolySonic PLA Pro @K2 Plus-all.json | 328 +++++---- .../Soleyin Ultra PLA @Ender-3 V4-all.json | 302 ++++---- .../filament/Soleyin Ultra PLA @Hi-all.json | 288 ++++---- .../Soleyin Ultra PLA @K1 Max_CFS-C-all.json | 326 +++++---- .../filament/Soleyin Ultra PLA @K1C-all.json | 326 +++++---- .../Soleyin Ultra PLA @K1C_CFS-C-all.json | 326 +++++---- .../Soleyin Ultra PLA @K1_CFS-C-all.json | 326 +++++---- .../Soleyin Ultra PLA @K2 Plus-all.json | 326 +++++---- .../Soleyin Ultra PLA @K2 Pro-all.json | 332 +++++---- .../Soleyin Ultra PLA @K2 SE-all.json | 296 ++++---- .../filament/Soleyin Ultra PLA @K2-all.json | 332 +++++---- .../Soleyin Ultra PLA @SPARKX i7-all.json | 344 +++++----- .../filament/eSUN ABS+ @K2 Plus-all.json | 314 +++++---- .../filament/eSUN ASA+ @K2 Plus-all.json | 314 +++++---- .../filament/eSUN PET-Basic @K2 Plus-all.json | 374 +++++----- .../filament/eSUN PLA+ @K2 Plus-all.json | 322 +++++---- .../filament/eSUN PLA-LW @K2 Plus-all.json | 334 +++++---- .../filament/eSUN PLA-Lite @K2 Plus-all.json | 334 +++++---- .../filament/eSUN PLA-Matte @K2 Plus-all.json | 328 +++++---- .../filament/eSUN PLA-Silk @K2 Plus-all.json | 328 +++++---- .../machine/Creality Ender-3 V3 KE.json | 2 +- .../Creality Ender-3 V4 0.4 nozzle.json | 11 +- .../Creality/machine/Creality Ender-3 V4.json | 2 +- .../Creality Ender-5 Max 0.4 nozzle.json | 1 - .../Creality Ender-5 Max 0.6 nozzle.json | 13 +- .../Creality Ender-5 Max 0.8 nozzle.json | 13 +- .../machine/Creality Ender-5 Max.json | 2 +- .../machine/Creality Hi 0.2 nozzle.json | 13 +- .../machine/Creality Hi 0.4 nozzle.json | 1 - .../machine/Creality Hi 0.6 nozzle.json | 1 - .../machine/Creality Hi 0.8 nozzle.json | 13 +- .../Creality/machine/Creality Hi.json | 2 +- .../machine/Creality K1 (0.4 nozzle).json | 3 +- .../machine/Creality K1 (0.6 nozzle).json | 1 - .../machine/Creality K1 (0.8 nozzle).json | 1 - .../machine/Creality K1 Max (0.4 nozzle).json | 1 - .../machine/Creality K1 Max (0.6 nozzle).json | 1 - .../machine/Creality K1 Max (0.8 nozzle).json | 1 - .../Creality K1 Max_CFS-C 0.4 nozzle.json | 11 +- .../machine/Creality K1 Max_CFS-C.json | 2 +- .../machine/Creality K1 SE 0.4 nozzle.json | 1 - .../machine/Creality K1 SE 0.6 nozzle.json | 13 +- .../machine/Creality K1 SE 0.8 nozzle.json | 13 +- .../Creality/machine/Creality K1 SE.json | 2 +- .../Creality K1 SE_CFS-C 0.4 nozzle.json | 11 +- .../machine/Creality K1 SE_CFS-C.json | 2 +- .../machine/Creality K1C 0.4 nozzle.json | 1 - .../machine/Creality K1C 0.6 nozzle.json | 1 - .../machine/Creality K1C 0.8 nozzle.json | 1 - .../Creality K1C_CFS-C 0.4 nozzle.json | 11 +- .../Creality/machine/Creality K1C_CFS-C.json | 2 +- .../machine/Creality K1_CFS-C 0.4 nozzle.json | 11 +- .../Creality/machine/Creality K1_CFS-C.json | 2 +- .../machine/Creality K2 0.2 nozzle.json | 5 +- .../machine/Creality K2 0.4 nozzle.json | 11 +- .../machine/Creality K2 0.6 nozzle.json | 5 +- .../machine/Creality K2 0.8 nozzle.json | 5 +- .../machine/Creality K2 Pro 0.4 nozzle.json | 1 - .../machine/Creality K2 Pro 0.6 nozzle.json | 1 - .../machine/Creality K2 Pro 0.8 nozzle.json | 1 - .../machine/Creality K2 SE 0.4 nozzle.json | 11 +- .../Creality/machine/Creality K2 SE.json | 2 +- .../Creality SPARKX i7 0.2 nozzle.json | 11 +- .../Creality SPARKX i7 0.4 nozzle.json | 11 +- .../Creality SPARKX i7 0.6 nozzle.json | 11 +- .../Creality SPARKX i7 0.8 nozzle.json | 11 +- .../Creality/machine/Creality SPARKX i7.json | 2 +- .../Creality/machine/fdm_creality_common.json | 1 - .../Creality/machine/fdm_machine_common.json | 1 - ...erDetail @Creality K2 Plus 0.2 nozzle.json | 10 +- ...08mm HueForge @Creality Hi 0.4 nozzle.json | 8 +- ...08mm HueForge @Creality K2 0.4 nozzle.json | 7 +- ...HueForge @Creality K2 Plus 0.4 nozzle.json | 8 +- ... HueForge @Creality K2 Pro 0.4 nozzle.json | 7 +- ...eForge @Creality SPARKX i7 0.4 nozzle.json | 9 +- ...m SuperDetail @Creality Hi 0.4 nozzle.json | 10 +- ...SuperDetail @Creality K1 (0.4 nozzle).json | 10 +- ...ail @Creality K1 Max_CFS-C 0.4 nozzle.json | 9 +- ... SuperDetail @Creality K1C 0.4 nozzle.json | 10 +- ...Detail @Creality K1C_CFS-C 0.4 nozzle.json | 9 +- ...erDetail @Creality K1Max (0.4 nozzle).json | 10 +- ...rDetail @Creality K1_CFS-C 0.4 nozzle.json | 9 +- ...m SuperDetail @Creality K2 0.2 nozzle.json | 1 - ...m SuperDetail @Creality K2 0.4 nozzle.json | 9 +- ...erDetail @Creality K2 Plus 0.2 nozzle.json | 10 +- ...erDetail @Creality K2 Plus 0.4 nozzle.json | 10 +- ...perDetail @Creality K2 Pro 0.2 nozzle.json | 1 - ...perDetail @Creality K2 Pro 0.4 nozzle.json | 9 +- ...Detail @Creality SPARKX i7 0.4 nozzle.json | 9 +- ...mm HighDetail @Creality K2 0.2 nozzle.json | 1 - ...ghDetail @Creality K2 Plus 0.2 nozzle.json | 10 +- ...ighDetail @Creality K2 Pro 0.2 nozzle.json | 1 - ...Detail @Creality SPARKX i7 0.2 nozzle.json | 9 +- ...0.12mm Detail @Creality K2 0.2 nozzle.json | 1 - ...0.12mm Detail @Creality K2 0.4 nozzle.json | 9 +- ...m Detail @Creality K2 Plus 0.2 nozzle.json | 10 +- ...m Detail @Creality K2 Plus 0.4 nozzle.json | 10 +- ...mm Detail @Creality K2 Pro 0.2 nozzle.json | 1 - ...mm Detail @Creality K2 Pro 0.4 nozzle.json | 9 +- .../0.12mm Fine @Creality CR10Max.json | 1 - .../0.12mm Fine @Creality CR10SE 0.2.json | 1 - .../0.12mm Fine @Creality CR10SE 0.4.json | 1 - .../0.12mm Fine @Creality CR10SE 0.6.json | 1 - .../0.12mm Fine @Creality CR10SE 0.8.json | 1 - .../0.12mm Fine @Creality Ender3 0.2.json | 1 - .../0.12mm Fine @Creality Ender3 0.4.json | 1 - .../0.12mm Fine @Creality Ender3 0.6.json | 1 - .../0.12mm Fine @Creality Ender3 0.8.json | 1 - .../0.12mm Fine @Creality Ender3 Pro 0.2.json | 1 - .../0.12mm Fine @Creality Ender3 Pro 0.4.json | 1 - .../0.12mm Fine @Creality Ender3 Pro 0.6.json | 1 - .../0.12mm Fine @Creality Ender3 Pro 0.8.json | 1 - .../0.12mm Fine @Creality Ender3V2.json | 1 - .../0.12mm Fine @Creality Ender3V2Neo.json | 1 - ...mm Fine @Creality Ender3V3 0.4 nozzle.json | 2 - .../0.12mm Fine @Creality Ender3V3KE.json | 1 - ...ine @Creality Ender3V3Plus 0.4 nozzle.json | 2 - .../0.12mm Fine @Creality Ender3V3SE 0.2.json | 1 - .../0.12mm Fine @Creality Ender3V3SE 0.4.json | 1 - .../0.12mm Fine @Creality Ender3V3SE 0.6.json | 1 - .../0.12mm Fine @Creality Ender3V3SE 0.8.json | 1 - ....12mm Fine @Creality Ender5Pro (2019).json | 1 - .../0.12mm Fine @Creality Hi 0.4 nozzle.json | 10 +- ...0.12mm Fine @Creality K1 (0.4 nozzle).json | 2 - ....12mm Fine @Creality K1 SE 0.4 nozzle.json | 4 +- .../0.12mm Fine @Creality K1C 0.4 nozzle.json | 4 +- ...2mm Fine @Creality K1Max (0.4 nozzle).json | 2 - ...m Fine @Creality SPARKX i7 0.4 nozzle.json | 9 +- ....14mm Optimal @Creality K2 0.2 nozzle.json | 1 - ... Optimal @Creality K2 Plus 0.2 nozzle.json | 10 +- ...m Optimal @Creality K2 Pro 0.2 nozzle.json | 1 - .../0.15mm Optimal @Creality CR10Max.json | 1 - .../0.15mm Optimal @Creality Ender3V2.json | 1 - ...mm Optimal @Creality Ender5Pro (2019).json | 1 - ... Fine @Creality Ender-3 V4 0.4 nozzle.json | 9 +- .../0.16mm Optimal @Creality CR-6 0.4.json | 1 - .../0.16mm Optimal @Creality CR10SE 0.2.json | 1 - .../0.16mm Optimal @Creality CR10SE 0.4.json | 1 - .../0.16mm Optimal @Creality CR10SE 0.6.json | 1 - .../0.16mm Optimal @Creality CR10SE 0.8.json | 1 - .../0.16mm Optimal @Creality CR10V2.json | 1 - .../0.16mm Optimal @Creality Ender3 0.2.json | 1 - .../0.16mm Optimal @Creality Ender3 0.4.json | 1 - .../0.16mm Optimal @Creality Ender3 0.6.json | 1 - .../0.16mm Optimal @Creality Ender3 0.8.json | 1 - ...16mm Optimal @Creality Ender3 Pro 0.2.json | 1 - ...16mm Optimal @Creality Ender3 Pro 0.4.json | 1 - ...16mm Optimal @Creality Ender3 Pro 0.6.json | 1 - ...16mm Optimal @Creality Ender3 Pro 0.8.json | 1 - .../0.16mm Optimal @Creality Ender3S1.json | 1 - ...mm Optimal @Creality Ender3S1Plus 0.2.json | 1 - ...mm Optimal @Creality Ender3S1Plus 0.4.json | 1 - ...mm Optimal @Creality Ender3S1Plus 0.6.json | 1 - ...mm Optimal @Creality Ender3S1Plus 0.8.json | 1 - .../0.16mm Optimal @Creality Ender3S1Pro.json | 1 - .../0.16mm Optimal @Creality Ender3V2Neo.json | 1 - ...Optimal @Creality Ender3V3 0.4 nozzle.json | 2 - .../0.16mm Optimal @Creality Ender3V3KE.json | 1 - ...mal @Creality Ender3V3Plus 0.4 nozzle.json | 2 - ...16mm Optimal @Creality Ender3V3SE 0.2.json | 1 - ...16mm Optimal @Creality Ender3V3SE 0.4.json | 1 - ...16mm Optimal @Creality Ender3V3SE 0.6.json | 1 - ...16mm Optimal @Creality Ender3V3SE 0.8.json | 1 - .../0.16mm Optimal @Creality Ender5.json | 1 - .../0.16mm Optimal @Creality Ender5Plus.json | 1 - .../0.16mm Optimal @Creality Ender5S.json | 1 - .../0.16mm Optimal @Creality Ender5S1.json | 1 - .../0.16mm Optimal @Creality Ender6.json | 1 - ....16mm Optimal @Creality Hi 0.4 nozzle.json | 10 +- ...6mm Optimal @Creality K1 (0.4 nozzle).json | 10 +- ...mal @Creality K1 Max_CFS-C 0.4 nozzle.json | 9 +- ...mm Optimal @Creality K1 SE 0.4 nozzle.json | 10 +- ...imal @Creality K1 SE_CFS-C 0.4 nozzle.json | 9 +- ...16mm Optimal @Creality K1C 0.4 nozzle.json | 10 +- ...ptimal @Creality K1C_CFS-C 0.4 nozzle.json | 9 +- ... Optimal @Creality K1Max (0.4 nozzle).json | 10 +- ...Optimal @Creality K1_CFS-C 0.4 nozzle.json | 9 +- ....16mm Optimal @Creality K2 0.4 nozzle.json | 9 +- ... Optimal @Creality K2 Plus 0.4 nozzle.json | 10 +- ...m Optimal @Creality K2 Pro 0.4 nozzle.json | 9 +- ...ptimal @Creality SPARKX i7 0.4 nozzle.json | 9 +- .../0.16mm Optimal @Creality Sermoon V1.json | 1 - ...m Standard @Creality K2 SE 0.4 nozzle.json | 7 +- ...0.18mm Detail @Creality K2 0.6 nozzle.json | 1 - ...m Detail @Creality K2 Plus 0.6 nozzle.json | 10 +- ...mm Detail @Creality K2 Pro 0.6 nozzle.json | 1 - ....1mm Standard @Creality Hi 0.2 nozzle.json | 7 +- ... Quality @Creality K2 Plus 0.4 nozzle.json | 8 +- .../0.20mm Standard @Creality CR10Max.json | 1 - .../0.20mm Standard @Creality CR10SE 0.2.json | 1 - .../0.20mm Standard @Creality CR10SE 0.4.json | 1 - .../0.20mm Standard @Creality CR10SE 0.6.json | 1 - .../0.20mm Standard @Creality CR10SE 0.8.json | 1 - .../0.20mm Standard @Creality CR10V2.json | 1 - .../0.20mm Standard @Creality CR10V3 0.4.json | 1 - .../0.20mm Standard @Creality CR10V3 0.6.json | 1 - ...ndard @Creality Ender-3 V4 0.4 nozzle.json | 7 +- ...rd @Creality Ender-5 Max 0.4mm nozzle.json | 1 - .../0.20mm Standard @Creality Ender3 0.2.json | 1 - .../0.20mm Standard @Creality Ender3 0.4.json | 1 - .../0.20mm Standard @Creality Ender3 0.6.json | 1 - .../0.20mm Standard @Creality Ender3 0.8.json | 1 - ...0mm Standard @Creality Ender3 Pro 0.2.json | 1 - ...0mm Standard @Creality Ender3 Pro 0.4.json | 1 - ...0mm Standard @Creality Ender3 Pro 0.6.json | 1 - ...0mm Standard @Creality Ender3 Pro 0.8.json | 1 - .../0.20mm Standard @Creality Ender3.json | 1 - .../0.20mm Standard @Creality Ender3S1.json | 1 - ...m Standard @Creality Ender3S1Plus 0.2.json | 1 - ...m Standard @Creality Ender3S1Plus 0.4.json | 1 - ...m Standard @Creality Ender3S1Plus 0.6.json | 1 - ...m Standard @Creality Ender3S1Plus 0.8.json | 1 - ...0.20mm Standard @Creality Ender3S1Pro.json | 1 - .../0.20mm Standard @Creality Ender3V2.json | 1 - ...0.20mm Standard @Creality Ender3V2Neo.json | 1 - ...tandard @Creality Ender3V3 0.4 nozzle.json | 2 - .../0.20mm Standard @Creality Ender3V3KE.json | 1 - ...ard @Creality Ender3V3Plus 0.4 nozzle.json | 2 - ...0mm Standard @Creality Ender3V3SE 0.2.json | 1 - ...0mm Standard @Creality Ender3V3SE 0.4.json | 1 - ...0mm Standard @Creality Ender3V3SE 0.6.json | 1 - ...0mm Standard @Creality Ender3V3SE 0.8.json | 1 - .../0.20mm Standard @Creality Ender5.json | 1 - .../0.20mm Standard @Creality Ender5Plus.json | 1 - ...m Standard @Creality Ender5Pro (2019).json | 1 - .../0.20mm Standard @Creality Ender5S.json | 1 - .../0.20mm Standard @Creality Ender5S1.json | 1 - .../0.20mm Standard @Creality Ender6.json | 1 - ...20mm Standard @Creality Hi 0.4 nozzle.json | 4 +- ...mm Standard @Creality K1 (0.4 nozzle).json | 4 +- ...ard @Creality K1 Max_CFS-C 0.4 nozzle.json | 7 +- .../0.20mm Standard @Creality K1 SE 0.4.json | 2 - ...dard @Creality K1 SE_CFS-C 0.4 nozzle.json | 7 +- ...0mm Standard @Creality K1C 0.4 nozzle.json | 4 +- ...andard @Creality K1C_CFS-C 0.4 nozzle.json | 7 +- ...Standard @Creality K1Max (0.4 nozzle).json | 4 +- ...tandard @Creality K1_CFS-C 0.4 nozzle.json | 7 +- ...20mm Standard @Creality K2 0.4 nozzle.json | 12 +- ...Standard @Creality K2 Plus 0.4 nozzle.json | 4 +- ... Standard @Creality K2 Pro 0.4 nozzle.json | 4 +- ...m Standard @Creality K2 SE 0.4 nozzle.json | 7 +- ...andard @Creality SPARKX i7 0.4 nozzle.json | 9 +- .../0.20mm Standard @Creality Sermoon V1.json | 1 - ...Strength @Creality K2 Plus 0.4 nozzle.json | 8 +- ...st @Creality Ender-5 Max 0.4mm nozzle.json | 1 - ...0.24mm Detail @Creality K2 0.8 nozzle.json | 1 - ...m Detail @Creality K2 Plus 0.8 nozzle.json | 10 +- ...mm Detail @Creality K2 Pro 0.8 nozzle.json | 1 - .../0.24mm Draft @Creality CR10Max.json | 1 - .../0.24mm Draft @Creality CR10SE 0.2.json | 1 - .../0.24mm Draft @Creality CR10SE 0.4.json | 1 - .../0.24mm Draft @Creality CR10SE 0.6.json | 1 - .../0.24mm Draft @Creality CR10SE 0.8.json | 1 - ...Draft @Creality Ender-3 V4 0.4 nozzle.json | 9 +- .../0.24mm Draft @Creality Ender3 0.2.json | 1 - .../0.24mm Draft @Creality Ender3 0.4.json | 1 - .../0.24mm Draft @Creality Ender3 0.6.json | 1 - .../0.24mm Draft @Creality Ender3 0.8.json | 1 - ...0.24mm Draft @Creality Ender3 Pro 0.2.json | 1 - ...0.24mm Draft @Creality Ender3 Pro 0.4.json | 1 - ...0.24mm Draft @Creality Ender3 Pro 0.6.json | 1 - ...0.24mm Draft @Creality Ender3 Pro 0.8.json | 1 - ...24mm Draft @Creality Ender3S1Plus 0.2.json | 1 - ...24mm Draft @Creality Ender3S1Plus 0.4.json | 1 - ...24mm Draft @Creality Ender3S1Plus 0.6.json | 1 - ...24mm Draft @Creality Ender3S1Plus 0.8.json | 1 - .../0.24mm Draft @Creality Ender3V2.json | 1 - .../0.24mm Draft @Creality Ender3V2Neo.json | 1 - ...m Draft @Creality Ender3V3 0.4 nozzle.json | 2 - .../0.24mm Draft @Creality Ender3V3KE.json | 1 - ...aft @Creality Ender3V3Plus 0.4 nozzle.json | 2 - ...0.24mm Draft @Creality Ender3V3SE 0.2.json | 1 - ...0.24mm Draft @Creality Ender3V3SE 0.4.json | 1 - ...0.24mm Draft @Creality Ender3V3SE 0.6.json | 1 - ...0.24mm Draft @Creality Ender3V3SE 0.8.json | 1 - ...24mm Draft @Creality Ender5Pro (2019).json | 1 - .../0.24mm Draft @Creality Hi 0.4 nozzle.json | 10 +- ....24mm Draft @Creality K1 (0.4 nozzle).json | 10 +- ...aft @Creality K1 Max_CFS-C 0.4 nozzle.json | 9 +- ...24mm Draft @Creality K1 SE 0.4 nozzle.json | 10 +- ...raft @Creality K1 SE_CFS-C 0.4 nozzle.json | 9 +- ...0.24mm Draft @Creality K1C 0.4 nozzle.json | 10 +- ... Draft @Creality K1C_CFS-C 0.4 nozzle.json | 9 +- ...mm Draft @Creality K1Max (0.4 nozzle).json | 10 +- ...m Draft @Creality K1_CFS-C 0.4 nozzle.json | 9 +- .../0.24mm Draft @Creality K2 0.4 nozzle.json | 10 +- ...mm Draft @Creality K2 Plus 0.4 nozzle.json | 10 +- ...4mm Draft @Creality K2 Pro 0.4 nozzle.json | 10 +- ... Draft @Creality SPARKX i7 0.4 nozzle.json | 9 +- ...Optimal @Creality Ender3V3 0.6 nozzle.json | 2 - ...mal @Creality Ender3V3Plus 0.6 nozzle.json | 2 - ....24mm Optimal @Creality Hi 0.6 nozzle.json | 2 - ...4mm Optimal @Creality K1 (0.6 nozzle).json | 2 - ...24mm Optimal @Creality K1C 0.6 nozzle.json | 2 - ... Optimal @Creality K1Max (0.6 nozzle).json | 2 - ....24mm Optimal @Creality K2 0.6 nozzle.json | 1 - ... Optimal @Creality K2 Plus 0.6 nozzle.json | 10 +- ...m Optimal @Creality K2 Pro 0.6 nozzle.json | 1 - ...m Standard @Creality K2 SE 0.4 nozzle.json | 7 +- .../0.28mm Standard @Creality Sermoon V1.json | 1 - ...Draft @Creality Ender-3 V4 0.4 nozzle.json | 9 +- ....28mm SuperDraft @Creality Ender3 0.2.json | 1 - ....28mm SuperDraft @Creality Ender3 0.4.json | 1 - ....28mm SuperDraft @Creality Ender3 0.6.json | 1 - ....28mm SuperDraft @Creality Ender3 0.8.json | 1 - ...m SuperDraft @Creality Ender3 Pro 0.2.json | 1 - ...m SuperDraft @Creality Ender3 Pro 0.4.json | 1 - ...m SuperDraft @Creality Ender3 Pro 0.6.json | 1 - ...m SuperDraft @Creality Ender3 Pro 0.8.json | 1 - ...mm SuperDraft @Creality Hi 0.4 nozzle.json | 10 +- ...mm SuperDraft @Creality K2 0.4 nozzle.json | 10 +- ...perDraft @Creality K2 Plus 0.4 nozzle.json | 10 +- ...uperDraft @Creality K2 Pro 0.4 nozzle.json | 10 +- ...rDraft @Creality SPARKX i7 0.4 nozzle.json | 9 +- ...dard @Creality Ender-5 Max 0.4 nozzle.json | 7 +- ...fast @Creality Ender-5 Max 0.4 nozzle.json | 7 +- ...dard @Creality Ender-5 Max 0.6 nozzle.json | 7 +- ...tandard @Creality Ender3V3 0.6 nozzle.json | 2 - ...ard @Creality Ender3V3Plus 0.6 nozzle.json | 2 - ...30mm Standard @Creality Hi 0.6 nozzle.json | 3 +- ...mm Standard @Creality K1 (0.6 nozzle).json | 4 +- ...m Standard @Creality K1 SE 0.6 nozzle.json | 8 +- ...0mm Standard @Creality K1C 0.6 nozzle.json | 4 +- ...Standard @Creality K1Max (0.6 nozzle).json | 4 +- ...30mm Standard @Creality K2 0.6 nozzle.json | 10 +- ...Standard @Creality K2 Plus 0.6 nozzle.json | 4 +- ... Standard @Creality K2 Pro 0.6 nozzle.json | 4 +- ...andard @Creality SPARKX i7 0.6 nozzle.json | 8 +- ...Strength @Creality K2 Plus 0.6 nozzle.json | 8 +- ...2mm Optimal @Creality K1 (0.8 nozzle).json | 2 - ...32mm Optimal @Creality K1C 0.8 nozzle.json | 2 - ... Optimal @Creality K1Max (0.8 nozzle).json | 2 - ....32mm Optimal @Creality K2 0.8 nozzle.json | 1 - ... Optimal @Creality K2 Plus 0.8 nozzle.json | 10 +- ...m Optimal @Creality K2 Pro 0.8 nozzle.json | 1 - ...m Draft @Creality Ender3V3 0.6 nozzle.json | 2 - ...aft @Creality Ender3V3Plus 0.6 nozzle.json | 2 - .../0.36mm Draft @Creality Hi 0.6 nozzle.json | 2 - ....36mm Draft @Creality K1 (0.6 nozzle).json | 2 - ...0.36mm Draft @Creality K1C 0.6 nozzle.json | 2 - ...mm Draft @Creality K1Max (0.6 nozzle).json | 2 - .../0.36mm Draft @Creality K2 0.6 nozzle.json | 1 - ...mm Draft @Creality K2 Plus 0.6 nozzle.json | 10 +- ...6mm Draft @Creality K2 Pro 0.6 nozzle.json | 1 - ...dard @Creality Ender-5 Max 0.8 nozzle.json | 7 +- ...40mm Standard @Creality Hi 0.8 nozzle.json | 7 +- ...mm Standard @Creality K1 (0.8 nozzle).json | 3 +- ...m Standard @Creality K1 SE 0.8 nozzle.json | 1 - ...0mm Standard @Creality K1C 0.8 nozzle.json | 3 +- ...Standard @Creality K1Max (0.8 nozzle).json | 3 +- ...40mm Standard @Creality K2 0.8 nozzle.json | 10 +- ...Standard @Creality K2 Plus 0.8 nozzle.json | 4 +- ... Standard @Creality K2 Pro 0.8 nozzle.json | 4 +- ...andard @Creality SPARKX i7 0.8 nozzle.json | 8 +- ...Strength @Creality K2 Plus 0.8 nozzle.json | 8 +- ...mm SuperDraft @Creality K2 0.6 nozzle.json | 1 - ...perDraft @Creality K2 Plus 0.6 nozzle.json | 10 +- ...uperDraft @Creality K2 Pro 0.6 nozzle.json | 1 - ....48mm Draft @Creality K1 (0.8 nozzle).json | 2 - ...0.48mm Draft @Creality K1C 0.8 nozzle.json | 2 - ...mm Draft @Creality K1Max (0.8 nozzle).json | 2 - .../0.48mm Draft @Creality K2 0.8 nozzle.json | 1 - ...mm Draft @Creality K2 Plus 0.8 nozzle.json | 10 +- ...8mm Draft @Creality K2 Pro 0.8 nozzle.json | 1 - ...mm SuperDraft @Creality K2 0.8 nozzle.json | 1 - ...perDraft @Creality K2 Plus 0.8 nozzle.json | 10 +- ...uperDraft @Creality K2 Pro 0.8 nozzle.json | 1 - .../Creality/process/fdm_process_common.json | 1 - .../process/fdm_process_creality_common.json | 1 - resources/profiles/Cubicon.json | 2 +- .../machine/Cubicon xCeler-I 0.4 nozzle.json | 1 - .../Cubicon xCeler-Mini 0.4 nozzle.json | 1 - .../Cubicon xCeler-Plus 0.4 nozzle.json | 1 - .../Cubicon/machine/fdm_machine_common.json | 1 - .../Cubicon/process/fdm_process_common.json | 1 - .../process/process template @base.json | 1 - resources/profiles/Custom.json | 2 +- .../filament/Generic ABS @MyToolChanger.json | 6 - .../filament/Generic ASA @MyToolChanger.json | 6 - .../filament/Generic PA @MyToolChanger.json | 6 - .../Generic PA-CF @MyToolChanger.json | 6 - .../filament/Generic PC @MyToolChanger.json | 6 - .../filament/Generic PETG @MyToolChanger.json | 6 - .../filament/Generic PLA @MyToolChanger.json | 6 - .../Generic PLA-CF @MyToolChanger.json | 6 - .../filament/Generic PVA @MyToolChanger.json | 6 - .../Custom/machine/fdm_klipper_common.json | 1 - .../Custom/machine/fdm_machine_common.json | 1 - .../Custom/machine/fdm_repetier_common.json | 3 +- .../Custom/machine/fdm_rrf_common.json | 1 - .../Custom/process/fdm_process_common.json | 2 - .../process/fdm_process_marlin_common.json | 1 - .../process/fdm_process_repetier_common.json | 3 +- .../process/fdm_process_rrf_common.json | 1 - resources/profiles/DeltaMaker.json | 2 +- .../machine/fdm_klipper_common.json | 1 - .../machine/fdm_machine_common.json | 2 - .../process/0.25mm Draft @DeltaMaker.json | 1 - .../process/fdm_process_common.json | 2 - resources/profiles/Dremel.json | 2 +- .../Dremel/machine/fdm_dremel_common.json | 1 - .../Dremel/machine/fdm_machine_common.json | 1 - .../.05mm Super Detail @Dremel 3D40 0.4.json | 2 - .../.05mm Super Detail @Dremel 3D45 0.4.json | 2 - .../.10mm Detail @Dremel 3D20 0.4.json | 2 - .../.10mm Detail @Dremel 3D40 0.4.json | 2 - .../.10mm Detail @Dremel 3D45 0.4.json | 2 - .../.20mm Standard @Dremel 3D20 0.4.json | 2 - .../.20mm Standard @Dremel 3D40 0.4.json | 2 - .../.20mm Standard @Dremel 3D45 0.4.json | 2 - .../process/.30mm Draft @Dremel 3D20 0.4.json | 2 - .../process/.30mm Draft @Dremel 3D40 0.4.json | 2 - .../process/.30mm Draft @Dremel 3D45 0.4.json | 2 - .../.34mm SuperDraft @Dremel 3D40 0.4.json | 2 - .../.34mm SuperDraft @Dremel 3D45 0.4.json | 2 - .../Dremel/process/fdm_process_common.json | 1 - .../process/fdm_process_dremel_common.json | 1 - resources/profiles/Elegoo.json | 2 +- .../Elegoo/machine/fdm_elegoo_common.json | 3 +- .../Elegoo/machine/fdm_machine_common.json | 1 - .../Elegoo/process/fdm_process_common.json | 2 - .../process/fdm_process_elegoo_common.json | 1 - resources/profiles/Eryone.json | 2 +- .../Eryone/filament/Eryone Standard PLA.json | 6 - .../Eryone/machine/ER20/Eryone ER20.json | 1 + .../ER20_Klipper/Eryone ER20 Klipper.json | 1 + .../machine/Thinker X400 0.4 nozzle.json | 1 - .../profiles/Eryone/machine/Thinker X400.json | 2 +- .../Eryone/machine/fdm_machine_common.json | 1 - ...dm_machine_eryone_ER20_Klipper_common.json | 1 - .../fdm_machine_eryone_ER20_common.json | 1 - .../0.20mm Standard @Thinker X400.json | 1 - .../0.12mm High Quality @Eryone ER20.json | 15 +- .../0.16mm Optimal @Eryone ER20.json | 15 +- ...2mm High Quality @Eryone ER20 Klipper.json | 15 +- .../0.16mm Optimal @Eryone ER20 Klipper.json | 15 +- .../Eryone/process/fdm_process_common.json | 2 - .../fdm_process_eryone_ER20_common.json | 4 - resources/profiles/FLSun.json | 2 +- .../FLSun/machine/fdm_machine_common.json | 1 - .../FLSun/process/0.08mm Fine @FLSun Q5.json | 1 - .../process/0.08mm Fine @FLSun QQSPro.json | 1 - .../FLSun/process/0.08mm Fine @FLSun SR.json | 1 - .../process/0.16mm Optimal @FLSun Q5.json | 1 - .../process/0.16mm Optimal @FLSun QQSPro.json | 1 - .../process/0.16mm Optimal @FLSun SR.json | 1 - .../process/0.20mm Standard @FLSun Q5.json | 1 - .../0.20mm Standard @FLSun QQSPro.json | 1 - .../process/0.20mm Standard @FLSun SR.json | 1 - .../FLSun/process/0.24mm Draft @FLSun Q5.json | 1 - .../process/0.24mm Draft @FLSun QQSPro.json | 1 - .../FLSun/process/0.24mm Draft @FLSun SR.json | 1 - .../process/0.30mm Extra Draft @FLSun Q5.json | 1 - .../0.30mm Extra Draft @FLSun QQSPro.json | 1 - .../process/0.30mm Extra Draft @FLSun SR.json | 1 - .../FLSun/process/fdm_process_common.json | 2 - resources/profiles/Flashforge.json | 2 +- .../FusRock PET @FF G4P 0.8 HF nozzle.json | 6 - .../filament/FusRock/FusRock NexPA-CF25.json | 8 +- .../filament/FusRock/FusRock PAHT-CF.json | 8 +- .../filament/FusRock/FusRock PET-CF.json | 8 +- .../filament/FusRock/FusRock S-Multi.json | 8 +- .../filament/FusRock/FusRock S-PAHT.json | 8 +- .../filament/Generic ABS @Flashforge G3U.json | 8 +- .../filament/Generic ASA @Flashforge AD4.json | 3 - .../filament/Generic ASA @Flashforge G3U.json | 8 +- .../filament/Generic ASA @Flashforge.json | 5 +- .../filament/Generic HIPS @Flashforge.json | 8 +- .../filament/Generic HS PLA @Flashforge.json | 11 +- .../Generic PETG @Flashforge G3U.json | 8 +- .../Generic PETG-CF @Flashforge G3U.json | 8 +- .../Generic PETG-CF10 @Flashforge AD4.json | 3 - .../Generic PETG-CF10 @Flashforge.json | 5 +- ...eneric PLA @Flashforge G3U 0.6 Nozzle.json | 3 +- ...eneric PLA @Flashforge G3U 0.8 Nozzle.json | 3 +- .../filament/Generic PLA @Flashforge G3U.json | 10 +- ...eneric PLA High Speed @Flashforge AD4.json | 9 - .../Generic PLA-CF @Flashforge G3U.json | 8 +- .../Generic PLA-CF10 @Flashforge AD4.json | 9 - .../Generic PLA-CF10 @Flashforge.json | 11 +- .../filament/Generic PVA @Flashforge.json | 8 +- .../filament/Generic TPU @Flashforge AD4.json | 3 - .../filament/Generic TPU @Flashforge.json | 5 +- .../filament/Polymaker/Polymaker CoPA.json | 8 +- .../filament/Polymaker/Polymaker S1.json | 8 +- .../machine/FlashForge AD5X 0.25 nozzle.json | 1 - .../machine/Flashforge AD5X 0.4 nozzle.json | 1 - .../machine/Flashforge AD5X 0.6 nozzle.json | 1 - .../machine/Flashforge AD5X 0.8 nozzle.json | 1 - .../Flashforge/machine/Flashforge AD5X.json | 2 +- .../Flashforge Adventurer 4 Series.json | 1 + .../machine/Flashforge Adventurer 5M Pro.json | 2 +- .../machine/Flashforge Adventurer 5M.json | 2 +- .../machine/Flashforge Artemis.json | 1 + .../Flashforge Creator 5 0.25 nozzle.json | 3 +- .../Flashforge Creator 5 0.4 nozzle.json | 1 - .../Flashforge Creator 5 0.6 nozzle.json | 1 - .../Flashforge Creator 5 0.8 nozzle.json | 1 - .../Flashforge Creator 5 Pro 0.25 nozzle.json | 3 +- .../Flashforge Creator 5 Pro 0.4 nozzle.json | 1 - .../Flashforge Creator 5 Pro 0.6 nozzle.json | 1 - .../Flashforge Creator 5 Pro 0.8 nozzle.json | 1 - .../machine/Flashforge Creator 5 Pro.json | 2 +- .../machine/Flashforge Creator 5.json | 2 +- .../Flashforge Guider 3 Ultra 0.4 Nozzle.json | 1 - .../machine/Flashforge Guider 3 Ultra.json | 2 +- .../Flashforge Guider4 0.25 nozzle.json | 3 +- .../Flashforge Guider4 0.4 HF nozzle.json | 3 +- .../Flashforge Guider4 0.4 nozzle.json | 3 +- .../Flashforge Guider4 0.6 HF nozzle.json | 3 +- .../Flashforge Guider4 0.6 nozzle.json | 3 +- .../Flashforge Guider4 0.8 HF nozzle.json | 3 +- .../Flashforge Guider4 Pro 0.25 nozzle.json | 3 +- .../Flashforge Guider4 Pro 0.4 HF nozzle.json | 3 +- .../Flashforge Guider4 Pro 0.4 nozzle.json | 3 +- .../Flashforge Guider4 Pro 0.6 HF nozzle.json | 3 +- .../Flashforge Guider4 Pro 0.6 nozzle.json | 3 +- .../Flashforge Guider4 Pro 0.8 HF nozzle.json | 3 +- .../machine/Flashforge Guider4 Pro.json | 2 +- .../machine/Flashforge Guider4.json | 2 +- .../machine/fdm_flashforge_common.json | 1 - .../machine/fdm_klipper_common.json | 2 - .../machine/fdm_machine_common.json | 2 - ...tail @Flashforge Guider 2s 0.4 nozzle.json | 2 - ...imal @Flashforge Guider 2s 0.4 nozzle.json | 2 - ... High-Speed @Flashforge AD4 HS Nozzle.json | 1 - ...m Standard @Flashforge AD3 0.4 Nozzle.json | 1 - ...m Standard @Flashforge AD4 0.4 Nozzle.json | 1 - ...andard @Flashforge Artemis 0.4 Nozzle.json | 1 - ...m Standard @Flashforge G3U 0.4 Nozzle.json | 1 - ...dard @Flashforge Guider 2s 0.4 nozzle.json | 2 - .../0.25mm Standard @FF G4P 0.6 nozzle.json | 1 - ...raft @Flashforge Guider 2s 0.4 nozzle.json | 2 - ....30mm Fast @Flashforge AD3 0.4 Nozzle.json | 1 - ....30mm Fast @Flashforge AD4 0.4 Nozzle.json | 1 - .../0.30mm Standard @FF G4P 0.6 nozzle.json | 1 - ...m Standard @Flashforge AD3 0.6 Nozzle.json | 1 - .../0.36mm Standard @FF G4P 0.6 nozzle.json | 1 - .../0.42mm Standard @FF G4P 0.6 nozzle.json | 1 - .../process/fdm_process_common.json | 1 - .../process/fdm_process_flashforge_0.20.json | 1 - .../process/fdm_process_flashforge_0.30.json | 1 - .../process/fdm_process_flashforge_0.40.json | 1 - .../fdm_process_flashforge_common.json | 1 - resources/profiles/FlyingBear.json | 2 +- .../Ghost7/FlyingBear Ghost7 0.4 nozzle.json | 1 - .../machine/Ghost7/FlyingBear Ghost7.json | 2 +- .../machine/S1/FlyingBear S1 0.4 nozzle.json | 1 - .../FlyingBear/machine/S1/FlyingBear S1.json | 2 +- .../machine/fdm_klipper_common.json | 1 - .../machine/fdm_machine_common.json | 1 - .../FlyingBear/machine/fdm_marlin_common.json | 1 - .../0.16mm Optimal @FlyingBear Reborn3.json | 1 - .../0.16mm Optimal @FlyingBear Ghost7.json | 1 - .../Ghost7/fdm_process_common_Ghost7.json | 2 - .../S1/0.16mm Optimal @FlyingBear S1.json | 1 - .../process/S1/fdm_process_common_S1.json | 2 - .../process/fdm_process_common.json | 2 - .../process/fdm_process_marlin_common.json | 2 - resources/profiles/Folgertech.json | 2 +- .../machine/fdm_folgertech_common.json | 1 - .../machine/fdm_machine_common.json | 2 - .../process/fdm_process_common.json | 1 - .../fdm_process_folgertech_common.json | 1 - resources/profiles/Geeetech.json | 2 +- .../Geeetech/machine/fdm_geeetech_common.json | 1 - .../Geeetech/machine/fdm_machine_common.json | 2 - .../Geeetech/process/fdm_process_common.json | 1 - resources/profiles/Ginger Additive.json | 2 +- .../filament/fdm_filament_common.json | 6 - .../machine/fdm_machine_common.json | 1 - .../process/fdm_process_common.json | 1 - resources/profiles/InfiMech.json | 2 +- .../EX+APS/InfiMech EX+APS 0.4 nozzle.json | 1 - .../machine/EX/InfiMech EX 0.4 nozzle.json | 1 - .../InfiMech TX Hardened Steel Nozzle.json | 2 +- .../InfiMech/machine/fdm_klipper_common.json | 1 - .../InfiMech/machine/fdm_machine_common.json | 1 - .../process/0.16mm Optimal @InfiMech TX.json | 1 - .../0.16mm Optimal @InfiMech EX+APS.json | 1 - .../EX+APS/fdm_process_common_EX+APS.json | 2 - .../EX/0.16mm Optimal @InfiMech EX.json | 1 - .../process/EX/fdm_process_common_EX.json | 2 - .../HSN/0.16mm Optimal @InfiMech TX HSN.json | 1 - .../process/HSN/fdm_process_common_HSN.json | 2 - .../InfiMech/process/fdm_process_common.json | 2 - resources/profiles/Kingroon.json | 2 +- .../Kingroon/machine/fdm_machine_common.json | 1 - .../0.20mm Standard @Kingroon KP3S V1.json | 1 - .../Kingroon/process/fdm_process_common.json | 4 - resources/profiles/LH.json | 2 +- .../profiles/LH/machine/fdm_lh_common.json | 5 +- .../LH/machine/fdm_machine_common.json | 3 +- .../LH/process/fdm_process_common.json | 4 +- resources/profiles/LONGER.json | 2 +- .../LONGER/machine/LONGER LK10 Plus.json | 2 +- .../profiles/LONGER/machine/LONGER LK10.json | 2 +- .../LONGER/machine/fdm_machine_common.json | 1 - .../LONGER/process/fdm_process_common.json | 1 - resources/profiles/Lulzbot.json | 2 +- .../Lulzbot/machine/Lulzbot Taz Pro S.json | 2 +- .../Lulzbot/machine/fdm_machine_common.json | 2 - .../0.25mm Standard @Lulzbot Taz 4 or 5.json | 1 - .../0.25mm Standard @Lulzbot Taz 6.json | 1 - ...0.25mm Standard @Lulzbot Taz Pro Dual.json | 1 - .../0.25mm Standard @Lulzbot Taz Pro S.json | 1 - .../Lulzbot/process/fdm_process_common.json | 1 - resources/profiles/M3D.json | 2 +- .../machine/M3D Enabler D8500 MM Model.json | 2 +- resources/profiles/MagicMaker.json | 2 +- .../machine/MM BoneKing 0.4 nozzle.json | 2 +- .../machine/fdm_machine_common.json | 2 - .../process/0.10mm Fine @MM BoneKing.json | 1 - .../process/0.10mm Fine @MM hj SK.json | 1 - .../process/0.10mm Fine @MM hqs SF.json | 1 - .../process/0.10mm Fine @MM hqs hj.json | 1 - .../process/0.10mm Fine @MM slb.json | 1 - .../0.10mm Fine Fast @MM BoneKing.json | 1 - .../process/0.10mm Fine Fast @MM hj SK.json | 1 - .../process/0.10mm Fine Fast @MM hqs SF.json | 1 - .../0.12mm Fine BestFast @MM BoneKing.json | 1 - .../0.12mm Fine SuperFast @MM BoneKing.json | 1 - .../process/0.20mm Standard @MM BoneKing.json | 1 - .../process/0.20mm Standard @MM hj SK.json | 1 - .../process/0.20mm Standard @MM hqs SF.json | 1 - .../process/0.20mm Standard @MM hqs hj.json | 1 - .../process/0.20mm Standard @MM slb.json | 1 - .../0.20mm Standard Fast @MM BoneKing.json | 1 - .../0.20mm Standard Fast @MM hj SK.json | 1 - .../0.20mm Standard Fast @MM hqs SF.json | 1 - .../process/0.30mm Draft @MM BoneKing.json | 1 - .../process/0.30mm Draft @MM hj SK.json | 1 - .../process/0.30mm Draft @MM hqs SF.json | 1 - .../process/0.30mm Draft @MM hqs hj.json | 1 - .../process/0.30mm Draft @MM slb.json | 1 - .../0.30mm Draft Fast @MM BoneKing.json | 1 - .../process/0.30mm Draft Fast @MM hj SK.json | 1 - .../process/0.30mm Draft Fast @MM hqs SF.json | 1 - .../process/fdm_process_common.json | 1 - resources/profiles/Mellow.json | 2 +- .../Mellow/machine/fdm_common_M1.json | 1 - .../Mellow/machine/fdm_machine_common.json | 1 - .../Mellow/process/fdm_process_common.json | 2 - resources/profiles/OpenEYE.json | 2 +- .../OpenEYE/machine/fdm_machine_common.json | 9 +- .../OpenEYE/machine/fdm_openeye_common.json | 11 +- .../OpenEYE/process/fdm_process_common.json | 2 - resources/profiles/OrcaArena.json | 2 +- .../machine/Orca Arena X1 Carbon.json | 2 +- .../machine/fdm_bbl_3dp_001_common.json | 1 - .../OrcaArena/machine/fdm_machine_common.json | 1 - .../process/fdm_process_arena_common.json | 2 - .../OrcaArena/process/fdm_process_common.json | 1 - resources/profiles/OrcaFilamentLibrary.json | 2 +- .../filament/COEX/COEX ABS @base.json | 6 - .../filament/COEX/COEX ABS PRIME @base.json | 6 - .../filament/COEX/COEX ASA PRIME @base.json | 6 - .../COEX/COEX NYLEX PA6-CF @base.json | 6 - .../COEX/COEX NYLEX UNFILLED @base.json | 6 - .../filament/COEX/COEX PCTG PRIME @base.json | 6 - .../filament/COEX/COEX PETG @base.json | 6 - .../filament/COEX/COEX PLA @base.json | 6 - .../filament/COEX/COEX PLA PRIME @base.json | 6 - .../filament/COEX/COEX PLA+Silk @base.json | 6 - .../filament/COEX/COEX TPE 30D @base.json | 6 - .../filament/COEX/COEX TPE 40D @base.json | 6 - .../filament/COEX/COEX TPE 60D @base.json | 6 - .../filament/COEX/COEX TPU 60A @base.json | 6 - resources/profiles/Peopoly.json | 2 +- .../Peopoly/machine/fdm_klipper_common.json | 1 - .../Peopoly/machine/fdm_machine_common.json | 1 - .../Peopoly/process/fdm_process_common.json | 1 - .../process/fdm_process_peopoly_common.json | 1 - .../process/fdm_process_pply_common.json | 1 - resources/profiles/Phrozen.json | 2 +- .../Generic PLA @Phrozen Arco 0.4 nozzle.json | 8 +- .../machine/Phrozen Arco 0.4 nozzle.json | 1 - ...0mm Standard @Phrozen Arco 0.4 nozzle.json | 2 - .../Phrozen/process/fdm_process_common.json | 2 - resources/profiles/Positron3D.json | 2 +- .../machine/fdm_common_the_positron.json | 1 - .../machine/fdm_machine_common.json | 1 - .../process/fdm_process_common.json | 2 - resources/profiles/Prusa.json | 2 +- .../filament/Generic ABS @Prusa XL 5T.json | 4 +- .../Prusa/filament/Generic ABS @Prusa XL.json | 4 +- .../filament/Generic FLEX @Prusa XL 5T.json | 4 +- .../filament/Generic FLEX @Prusa XL.json | 4 +- .../filament/Generic PETG @Prusa XL 5T.json | 4 +- .../filament/Generic PETG @Prusa XL.json | 4 +- .../filament/Generic PLA @Prusa XL 5T.json | 4 +- .../Prusa/filament/Generic PLA @Prusa XL.json | 4 +- .../Prusa/filament/Prusament ASA @XL 5T.json | 6 +- .../Prusa/filament/Prusament ASA @XL.json | 6 +- .../filament/Prusament PA-CF @XL 5T.json | 6 +- .../Prusa/filament/Prusament PA-CF @XL.json | 6 +- .../filament/Prusament PC Blend @XL 5T.json | 2 - .../filament/Prusament PC Blend @XL.json | 2 - .../filament/Prusament PC-CF @XL 5T.json | 6 +- .../Prusa/filament/Prusament PC-CF @XL.json | 6 +- .../Prusa/filament/Prusament PETG @XL 5T.json | 2 - .../Prusa/filament/Prusament PETG @XL.json | 2 - .../Prusa/filament/Prusament PLA @XL 5T.json | 2 - .../Prusa/filament/Prusament PLA @XL.json | 2 - .../Prusa/filament/Prusament PVB @XL 5T.json | 6 +- .../Prusa/filament/Prusament PVB @XL.json | 6 +- .../Prusa/filament/Prusament rPLA @XL 5T.json | 2 - .../Prusa/filament/Prusament rPLA @XL.json | 2 - .../Prusa/machine/Prusa CORE One HF.json | 2 +- .../Prusa/machine/Prusa CORE One L HF.json | 2 +- .../Prusa/machine/Prusa CORE One L.json | 2 +- .../Prusa/machine/Prusa CORE One.json | 2 +- .../profiles/Prusa/machine/Prusa MK4S HF.json | 2 +- .../profiles/Prusa/machine/Prusa MK4S.json | 2 +- .../Prusa/process/fdm_process_common.json | 2 - resources/profiles/Qidi.json | 2 +- resources/profiles/Qidi/machine/Qidi Q2.json | 2 +- resources/profiles/Qidi/machine/Qidi Q2C.json | 2 +- .../profiles/Qidi/machine/Qidi X-Max 3.json | 2 +- .../profiles/Qidi/machine/Qidi X-Max 4.json | 2 +- .../profiles/Qidi/machine/Qidi X-Plus 3.json | 2 +- .../profiles/Qidi/machine/Qidi X-Plus 4.json | 2 +- .../profiles/Qidi/machine/Qidi X-Smart 3.json | 2 +- .../Qidi/machine/fdm_machine_common.json | 1 - .../Qidi/machine/fdm_machine_x_common.json | 1 - .../profiles/Qidi/machine/fdm_q_common.json | 1 - .../Qidi/machine/fdm_qidi_common.json | 1 - ...0.08mm Extra Fine @X-Max 4 0.2 nozzle.json | 1 - .../process/0.08mm Extra Fine @X-Max 4.json | 1 - .../0.10mm Standard @X-Max 4 0.2 nozzle.json | 1 - ... Balanced Quality @X-Max 4 0.2 nozzle.json | 1 - .../Qidi/process/0.12mm Fine @Qidi X3.json | 1 - .../process/0.12mm Fine @Qidi XCFPro.json | 1 - .../Qidi/process/0.12mm Fine @Qidi XMax.json | 1 - .../Qidi/process/0.12mm Fine @Qidi XPlus.json | 1 - .../Qidi/process/0.12mm Fine @X-Max 4.json | 1 - .../0.16mm Balanced Quality @X-Max 4.json | 1 - .../Qidi/process/0.16mm Optimal @Qidi X3.json | 1 - .../process/0.16mm Optimal @Qidi XCFPro.json | 1 - .../process/0.16mm Optimal @Qidi XMax.json | 1 - .../process/0.16mm Optimal @Qidi XPlus.json | 1 - .../process/0.16mm Standard @X-Max 4.json | 1 - ... Balanced Quality @X-Max 4 0.6 nozzle.json | 1 - .../0.20mm Balanced Strength @X-Max 4.json | 1 - .../process/0.20mm Standard @Qidi XCFPro.json | 1 - .../process/0.20mm Standard @Qidi XMax.json | 1 - .../process/0.20mm Standard @Qidi XPlus.json | 1 - .../process/0.20mm Standard @X-Max 4.json | 1 - ... Balanced Quality @X-Max 4 0.8 nozzle.json | 1 - ...Balanced Strength @X-Max 4 0.6 nozzle.json | 1 - .../Qidi/process/0.24mm Draft @Qidi X3.json | 1 - .../process/0.24mm Standard @X-Max 4.json | 1 - .../process/0.25mm Draft @Qidi Q1 Pro.json | 1 - .../Qidi/process/0.25mm Draft @Qidi Q2.json | 1 - .../Qidi/process/0.25mm Draft @Qidi Q2C.json | 1 - .../process/0.25mm Draft @Qidi XCFPro.json | 1 - .../Qidi/process/0.25mm Draft @Qidi XMax.json | 1 - .../process/0.25mm Draft @Qidi XMax3.json | 1 - .../process/0.25mm Draft @Qidi XPlus.json | 1 - .../process/0.25mm Draft @Qidi XPlus3.json | 1 - .../process/0.25mm Draft @Qidi XPlus4.json | 1 - .../process/0.25mm Draft @Qidi XSmart3.json | 1 - .../process/0.28mm Extra Draft @Qidi X3.json | 1 - .../0.30mm Extra Draft @Qidi Q1 Pro.json | 1 - .../process/0.30mm Extra Draft @Qidi Q2.json | 1 - .../process/0.30mm Extra Draft @Qidi Q2C.json | 1 - .../0.30mm Extra Draft @Qidi XCFPro.json | 1 - .../0.30mm Extra Draft @Qidi XMax.json | 1 - .../0.30mm Extra Draft @Qidi XMax3.json | 1 - .../0.30mm Extra Draft @Qidi XPlus.json | 1 - .../0.30mm Extra Draft @Qidi XPlus3.json | 1 - .../0.30mm Extra Draft @Qidi XPlus4.json | 1 - .../0.30mm Extra Draft @Qidi XSmart3.json | 1 - .../0.30mm Standard @X-Max 4 0.6 nozzle.json | 1 - ...Balanced Strength @X-Max 4 0.8 nozzle.json | 1 - .../0.40mm Standard @X-Max 4 0.8 nozzle.json | 1 - .../Qidi/process/fdm_process_common.json | 1 - .../Qidi/process/fdm_process_n_common.json | 6 - .../Qidi/process/fdm_process_qidi_common.json | 1 - .../process/fdm_process_qidi_x3_common.json | 2 - resources/profiles/RH3D.json | 2 +- .../RH3D/process/fdm_process_common.json | 2 - resources/profiles/Raise3D.json | 2 +- .../Raise3D/machine/fdm_machine_common.json | 2 - .../process/0.10mm Fine @Raise3D Pro3.json | 1 - .../0.10mm Fine @Raise3D Pro3Plus.json | 1 - .../0.20mm Standard @Raise3D Pro3.json | 1 - .../0.20mm Standard @Raise3D Pro3Plus.json | 1 - .../process/0.25mm Draft @Raise3D Pro3.json | 1 - .../0.25mm Draft @Raise3D Pro3Plus.json | 1 - .../Raise3D/process/fdm_process_common.json | 1 - resources/profiles/Ratrig.json | 2 +- .../Ratrig/machine/RatRig V-Core 4 300.json | 2 +- .../Ratrig/machine/RatRig V-Core 4 400.json | 2 +- .../Ratrig/machine/RatRig V-Core 4 500.json | 2 +- .../machine/RatRig V-Core 4 HYBRID 300.json | 2 +- .../machine/RatRig V-Core 4 HYBRID 400.json | 2 +- .../machine/RatRig V-Core 4 HYBRID 500.json | 2 +- .../RatRig V-Core 4 IDEX 300 COPY MODE.json | 2 +- .../RatRig V-Core 4 IDEX 300 MIRROR MODE.json | 2 +- .../machine/RatRig V-Core 4 IDEX 300.json | 2 +- .../RatRig V-Core 4 IDEX 400 COPY MODE.json | 2 +- .../RatRig V-Core 4 IDEX 400 MIRROR MODE.json | 2 +- .../machine/RatRig V-Core 4 IDEX 400.json | 2 +- .../RatRig V-Core 4 IDEX 500 COPY MODE.json | 2 +- .../RatRig V-Core 4 IDEX 500 MIRROR MODE.json | 2 +- .../machine/RatRig V-Core 4 IDEX 500.json | 2 +- .../Ratrig/machine/fdm_klipper_common.json | 1 - .../Ratrig/machine/fdm_machine_common.json | 1 - .../Ratrig/process/fdm_process_common.json | 1 - .../process/fdm_process_ratrig_common.json | 1 - .../fdm_process_ratrig_common_idex.json | 1 - .../process/fdm_process_ratrig_idex.json | 1 - resources/profiles/RolohaunDesign.json | 2 +- .../machine/fdm_common_Rook MK1 LDO.json | 1 - .../machine/fdm_machine_common.json | 1 - .../process/fdm_process_common.json | 2 - resources/profiles/SecKit.json | 2 +- .../SecKit/machine/fdm_klipper_common.json | 1 - .../SecKit/machine/fdm_machine_common.json | 1 - .../SecKit/process/fdm_process_common.json | 1 - .../process/fdm_process_seckit_common.json | 1 - resources/profiles/SeeMeCNC.json | 2 +- .../machine/SeeMeCNC_Artemis_0_4mm.json | 3 +- .../machine/SeeMeCNC_Artemis_0_5mm.json | 3 +- .../machine/SeeMeCNC_Artemis_0_7mm.json | 3 +- .../machine/SeeMeCNC_Artemis_1_0mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0505_0_4mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0505_0_5mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0505_0_7mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0505_1_0mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0510_0_4mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0510_0_5mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0510_0_7mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0510_1_0mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0521_0_4mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0521_0_5mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0521_0_7mm.json | 3 +- .../SeeMeCNC_BOSSdelta500_0521_1_0mm.json | 3 +- .../machine/SeeMeCNC_BOSSdelta_300_0_4mm.json | 3 +- .../machine/SeeMeCNC_BOSSdelta_300_0_5mm.json | 3 +- .../machine/SeeMeCNC_BOSSdelta_300_0_7mm.json | 3 +- .../machine/SeeMeCNC_BOSSdelta_300_1_0mm.json | 3 +- .../SeeMeCNC_RostockMAX_v3.2_0_4mm.json | 3 +- .../SeeMeCNC_RostockMAX_v3.2_0_5mm.json | 3 +- .../SeeMeCNC_RostockMAX_v3.2_0_7mm.json | 3 +- .../SeeMeCNC_RostockMAX_v3.2_1_0mm.json | 3 +- .../machine/SeeMeCNC_RostockMAX_v4_0_4mm.json | 3 +- .../machine/SeeMeCNC_RostockMAX_v4_0_5mm.json | 3 +- .../machine/SeeMeCNC_RostockMAX_v4_0_7mm.json | 3 +- .../machine/SeeMeCNC_RostockMAX_v4_1_0mm.json | 3 +- resources/profiles/Snapmaker.json | 2 +- .../filament/Snapmaker ABS @U1 base.json | 6 - .../filament/Snapmaker ASA @U1 base.json | 6 - .../Snapmaker Dual ABS @0.2 nozzle.json | 6 - .../filament/Snapmaker Dual ABS @base.json | 6 - .../Snapmaker Dual ASA @0.2 nozzle.json | 6 - .../filament/Snapmaker Dual ASA @base.json | 6 - .../Snapmaker Dual Breakaway @base.json | 6 - .../filament/Snapmaker Dual PA-CF @base.json | 6 - .../filament/Snapmaker Dual PET @base.json | 6 - .../filament/Snapmaker Dual PETG @base.json | 6 - .../Snapmaker Dual PETG-CF @base.json | 6 - .../filament/Snapmaker Dual PLA @base.json | 6 - .../Snapmaker Dual PLA Eco @base.json | 6 - .../Snapmaker Dual PLA Matte @base.json | 6 - .../Snapmaker Dual PLA Metal @base.json | 6 - .../Snapmaker Dual PLA Silk @base.json | 6 - .../filament/Snapmaker Dual PLA-CF @base.json | 6 - .../filament/Snapmaker Dual PVA @base.json | 6 - .../filament/Snapmaker Dual TPU @base.json | 6 - .../filament/Snapmaker J1 ABS Benchy.json | 6 - .../filament/Snapmaker PA-CF @U1 base.json | 6 - .../filament/Snapmaker PET @U1 base.json | 6 - .../filament/Snapmaker PETG @U1 base.json | 6 - .../filament/Snapmaker PETG-CF @U1 base.json | 6 - .../filament/Snapmaker PLA @U1 base.json | 6 - .../Snapmaker PLA Basic @U1 base.json | 6 - .../filament/Snapmaker PLA Eco @U1 base.json | 6 - .../filament/Snapmaker PLA Glow @U1 base.json | 6 - .../filament/Snapmaker PLA Lite @U1 base.json | 6 - .../Snapmaker PLA Matte @U1 base.json | 6 - .../Snapmaker PLA Matte @U1 base2.json | 6 - .../Snapmaker PLA Metal @U1 base.json | 6 - .../filament/Snapmaker PLA Silk @U1 base.json | 6 - .../Snapmaker PLA SnapSpeed @U1 base.json | 6 - .../Snapmaker PLA Translucent @U1 base.json | 6 - .../filament/Snapmaker PLA-CF @U1 base.json | 6 - .../filament/Snapmaker PVA @U1 base.json | 6 - .../filament/Snapmaker TPU @U1 base.json | 6 - .../filament/fdm_filament_common.json | 6 - .../machine/Snapmaker A250 BKit.json | 1 + .../machine/Snapmaker A250 Dual BKit.json | 1 + .../machine/Snapmaker A250 Dual QS+B Kit.json | 1 + .../machine/Snapmaker A250 Dual QSKit.json | 1 + .../machine/Snapmaker A250 Dual.json | 1 + .../machine/Snapmaker A250 QS+B Kit.json | 1 + .../machine/Snapmaker A250 QSKit.json | 1 + .../Snapmaker/machine/Snapmaker A250.json | 1 + .../machine/Snapmaker A350 BKit.json | 1 + .../machine/Snapmaker A350 Dual BKit.json | 1 + .../machine/Snapmaker A350 Dual QS+B Kit.json | 1 + .../machine/Snapmaker A350 Dual QSKit.json | 1 + .../machine/Snapmaker A350 Dual.json | 1 + .../machine/Snapmaker A350 QS+B Kit.json | 1 + .../machine/Snapmaker A350 QSKit.json | 1 + .../Snapmaker/machine/Snapmaker A350.json | 1 + .../Snapmaker/machine/Snapmaker Artisan.json | 1 + .../Snapmaker/machine/Snapmaker J1.json | 1 + .../Snapmaker/machine/Snapmaker U1.json | 1 + .../Snapmaker/machine/fdm_common.json | 1 - .../Snapmaker/machine/fdm_klipper.json | 1 - .../Snapmaker/machine/fdm_toolchanger.json | 1 - ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 2 - ...6 Standard @Snapmaker U1 (0.2 nozzle).json | 2 - ...Extra Fine @Snapmaker U1 (0.4 nozzle).json | 2 - ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 2 - ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 2 - ...8 Standard @Snapmaker U1 (0.2 nozzle).json | 2 - ...gh Quality @Snapmaker U1 (0.2 nozzle).json | 2 - ...0 Standard @Snapmaker U1 (0.2 nozzle).json | 2 - .../0.12 Fine @Snapmaker U1 (0.4 nozzle).json | 2 - ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 2 - ...2 Standard @Snapmaker U1 (0.2 nozzle).json | 2 - ...4 Standard @Snapmaker U1 (0.2 nozzle).json | 2 - ...gh Quality @Snapmaker U1 (0.4 nozzle).json | 2 - ...16 Optimal @Snapmaker U1 (0.4 nozzle).json | 2 - ...8 Standard @Snapmaker U1 (0.6 nozzle).json | 2 - ...20 Quality @Snapmaker U1 (0.4 nozzle).json | 2 - ...0 Standard @Snapmaker U1 (0.4 nozzle).json | 2 - ...andard @Snapmaker U1 (0.4+0.6 nozzle).json | 2 - ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 2 - ...0 Strength @Snapmaker U1 (0.4 nozzle).json | 2 - ...20 Support @Snapmaker U1 (0.4 nozzle).json | 2 - ...0.24 Draft @Snapmaker U1 (0.4 nozzle).json | 2 - ...4 Standard @Snapmaker U1 (0.6 nozzle).json | 2 - ...4 Standard @Snapmaker U1 (0.8 nozzle).json | 2 - ...xtra Draft @Snapmaker U1 (0.4 nozzle).json | 2 - ...0.30 Draft @Snapmaker U1 (0.6 nozzle).json | 2 - ...0 Standard @Snapmaker U1 (0.6 nozzle).json | 2 - ...0 Strength @Snapmaker U1 (0.6 nozzle).json | 2 - ...2 Standard @Snapmaker U1 (0.8 nozzle).json | 2 - ...6 Standard @Snapmaker U1 (0.6 nozzle).json | 2 - ...xtra Draft @Snapmaker U1 (0.6 nozzle).json | 2 - ...0 Standard @Snapmaker U1 (0.8 nozzle).json | 2 - ...2 Standard @Snapmaker U1 (0.6 nozzle).json | 2 - ...8 Standard @Snapmaker U1 (0.8 nozzle).json | 2 - ...6 Standard @Snapmaker U1 (0.8 nozzle).json | 2 - .../Snapmaker/process/fdm_process_U1.json | 5 +- .../process/fdm_process_U1_common.json | 1 - .../Snapmaker/process/fdm_process_common.json | 4 - resources/profiles/Sovol.json | 2 +- .../Sovol/machine/Sovol SV08 MAX.json | 2 +- .../Sovol/machine/fdm_machine_common.json | 2 - ...gh Quality @Sovol SV06 ACE 0.4 nozzle.json | 1 - ....10mm Standard @Sovol SV08 0.2 nozzle.json | 1 - ...mm Quality @Sovol SV06 ACE 0.4 nozzle.json | 1 - ...m Standard @Sovol SV06 ACE 0.2 nozzle.json | 1 - .../0.18mm Optimal @Sovol SV01Pro.json | 1 - .../process/0.18mm Optimal @Sovol SV02.json | 1 - .../process/0.18mm Optimal @Sovol SV05.json | 1 - .../process/0.18mm Optimal @Sovol SV06.json | 1 - .../0.18mm Optimal @Sovol SV06Plus.json | 1 - .../process/0.18mm Optimal @Sovol SV07.json | 1 - .../0.18mm Optimal @Sovol SV07Plus.json | 1 - .../process/0.18mm Optimal @Sovol SV08.json | 1 - .../0.20mm High-Speed @Sovol SV06.json | 1 - .../process/0.20mm Standard @Sovol SV01.json | 5 +- .../0.20mm Standard @Sovol SV01Pro.json | 1 - .../process/0.20mm Standard @Sovol SV02.json | 1 - .../process/0.20mm Standard @Sovol SV05.json | 1 - .../0.20mm Standard @Sovol SV06 ACE.json | 1 - .../0.20mm Standard @Sovol SV06 Plus ACE.json | 1 - .../process/0.20mm Standard @Sovol SV06.json | 1 - .../0.20mm Standard @Sovol SV06Plus.json | 1 - .../process/0.20mm Standard @Sovol SV07.json | 1 - .../0.20mm Standard @Sovol SV07Plus.json | 1 - ....20mm Standard @Sovol SV08 0.4 nozzle.json | 1 - ...m Standard @Sovol SV08 MAX 0.4 nozzle.json | 5 +- .../process/0.20mm Standard @Sovol SV08.json | 1 - ....20mm Standard @Sovol Zero 0.4 nozzle.json | 1 - ....28mm Fast @Sovol SV06 ACE 0.4 nozzle.json | 1 - ...m Standard @Sovol SV06 ACE 0.6 nozzle.json | 1 - ....30mm Standard @Sovol SV08 0.6 nozzle.json | 1 - ...m Standard @Sovol SV08 MAX 0.6 nozzle.json | 5 +- ...m Standard @Sovol SV06 ACE 0.8 nozzle.json | 1 - ....40mm Standard @Sovol SV08 0.8 nozzle.json | 1 - ...m Standard @Sovol SV08 MAX 0.8 nozzle.json | 5 +- .../Sovol/process/fdm_process_common.json | 1 - resources/profiles/Tiertime.json | 2 +- .../Tiertime/machine/Tiertime UP300 HS.json | 2 +- .../Tiertime/machine/Tiertime UP600 HS.json | 2 +- .../Tiertime/machine/fdm_machine_common.json | 1 - .../Tiertime/machine/fdm_tiertime_common.json | 7 +- ...m Fine @Tiertime UP400 Pro 0.6 nozzle.json | 2 - ...mm Fine @Tiertime UP600 HS 0.6 nozzle.json | 2 - ...m Fine @Tiertime UP400 Pro 0.8 nozzle.json | 2 - ...mm Fine @Tiertime UP600 HS 0.8 nozzle.json | 2 - ...andard @Tiertime UP400 Pro 0.6 nozzle.json | 2 - ...tandard @Tiertime UP600 HS 0.6 nozzle.json | 2 - ...andard @Tiertime UP400 Pro 0.6 nozzle.json | 2 - ...tandard @Tiertime UP600 HS 0.6 nozzle.json | 2 - ...rength @Tiertime UP400 Pro 0.6 nozzle.json | 2 - ...trength @Tiertime UP600 HS 0.6 nozzle.json | 2 - ...andard @Tiertime UP400 Pro 0.8 nozzle.json | 2 - ...tandard @Tiertime UP600 HS 0.8 nozzle.json | 2 - ... Draft @Tiertime UP400 Pro 0.6 nozzle.json | 2 - ...m Draft @Tiertime UP600 HS 0.6 nozzle.json | 2 - ...andard @Tiertime UP400 Pro 0.8 nozzle.json | 2 - ...tandard @Tiertime UP600 HS 0.8 nozzle.json | 2 - ... Draft @Tiertime UP400 Pro 0.6 nozzle.json | 2 - ...a Draft @Tiertime UP600 HS 0.6 nozzle.json | 2 - ... Draft @Tiertime UP400 Pro 0.8 nozzle.json | 2 - ...m Draft @Tiertime UP600 HS 0.8 nozzle.json | 2 - ... Draft @Tiertime UP400 Pro 0.8 nozzle.json | 2 - ...a Draft @Tiertime UP600 HS 0.8 nozzle.json | 2 - .../Tiertime/process/fdm_process_common.json | 1 - .../process/fdm_process_tiertime_common.json | 1 - resources/profiles/Tronxy.json | 2 +- .../Tronxy/machine/fdm_machine_common.json | 1 - .../Tronxy/process/fdm_process_common.json | 1 - .../process/fdm_process_tronxy_common.json | 1 - resources/profiles/TwoTrees.json | 2 +- .../TwoTrees/machine/TwoTrees SK1.json | 2 +- .../machine/TwoTrees SP-5 Klipper.json | 2 +- .../TwoTrees/machine/fdm_klipper_common.json | 3 +- .../TwoTrees/machine/fdm_machine_common.json | 1 - .../process/fdm_process_TwoTrees_common.json | 1 - .../TwoTrees/process/fdm_process_common.json | 1 - resources/profiles/UltiMaker.json | 2 +- .../UltiMaker/machine/fdm_machine_common.json | 2 - .../process/0.12mm Fine @UltiMaker 2.json | 1 - .../process/0.18mm Standard @UltiMaker 2.json | 1 - .../process/0.25mm Darft @UltiMaker 2.json | 1 - .../UltiMaker/process/fdm_process_common.json | 1 - resources/profiles/Vivedino.json | 2 +- .../Vivedino/machine/fdm_klipper_common.json | 1 - .../Vivedino/machine/fdm_machine_common.json | 1 - .../Vivedino/machine/fdm_rrf_common.json | 1 - .../Vivedino/process/fdm_process_common.json | 1 - .../process/fdm_process_klipper_common.json | 1 - resources/profiles/Volumic.json | 2 +- .../profiles/Volumic/machine/EXO42 IDRE.json | 2 +- .../Volumic/machine/EXO42 Performance.json | 2 +- .../profiles/Volumic/machine/EXO65 IDRE.json | 2 +- .../Volumic/machine/EXO65 Performance.json | 2 +- .../profiles/Volumic/machine/SH65 IDRE.json | 2 +- .../Volumic/machine/SH65 Performance.json | 2 +- .../Volumic/machine/VS30SC2 Performance.json | 2 +- .../Volumic/machine/fdm_volumic_common.json | 1 - .../process/fdm_process_volumic_common.json | 1 - resources/profiles/Voron.json | 2 +- .../Voron/machine/fdm_klipper_common.json | 1 - .../Voron/machine/fdm_machine_common.json | 1 - .../Voron/process/fdm_process_common.json | 1 - .../process/fdm_process_voron_common.json | 1 - resources/profiles/Voxelab.json | 2 +- .../Voxelab/machine/fdm_machine_common.json | 2 - .../0.16mm Optimal @Voxelab AquilaX2.json | 1 - .../0.20mm Standard @Voxelab AquilaX2.json | 1 - .../Voxelab/process/fdm_process_common.json | 1 - resources/profiles/Vzbot.json | 2 +- .../Vzbot/machine/fdm_klipper_common.json | 2 - .../Vzbot/machine/fdm_machine_common.json | 1 - .../process/fdm_process_Vzbot_common.json | 1 - .../fdm_process_Vzbot_common_0.5_nozzle.json | 1 - .../fdm_process_Vzbot_common_0.6_nozzle.json | 1 - .../Vzbot/process/fdm_process_common.json | 1 - .../fdm_process_common_0.5_nozzle.json | 1 - .../fdm_process_common_0.6_nozzle.json | 1 - resources/profiles/WEMAKE3D.json | 2 +- .../WEMAKE3D/process/fdm_process_common.json | 2 - resources/profiles/Wanhao France.json | 2 +- .../Wanhao France/filament/YUMI PETG.json | 6 - ...12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json | 2 +- .../D12 300 PRO M2 DIRECT 0.4 nozzle.json | 2 +- ...12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json | 2 +- .../D12 500 PRO M2 DIRECT 0.4 nozzle.json | 2 +- ...12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json | 2 +- .../machine/fdm_machine_common.json | 1 - .../process/fdm_process_common.json | 1 - resources/profiles/Wanhao.json | 2 +- .../Wanhao/machine/fdm_machine_common.json | 2 - .../Wanhao/machine/fdm_wanhao_common.json | 1 - .../Wanhao/process/fdm_process_common.json | 1 - .../process/fdm_process_wanhao_common.json | 1 - resources/profiles/WonderMaker.json | 2 +- .../machine/fdm_machine_common.json | 1 - ....06mm Fine @WonderMaker ZR 0.2 nozzle.json | 2 - ...Fine @WonderMaker ZR Ultra 0.2 nozzle.json | 2 - ...08mm Extra Fine @WonderMaker ZR Ultra.json | 2 - .../0.08mm Extra Fine @WonderMaker ZR.json | 2 - ...mm Optimal @WonderMaker ZR 0.2 nozzle.json | 2 - ...imal @WonderMaker ZR Ultra 0.2 nozzle.json | 2 - ...m Standard @WonderMaker ZR 0.2 nozzle.json | 2 - ...dard @WonderMaker ZR Ultra 0.2 nozzle.json | 2 - ...12mm Draft @WonderMaker ZR 0.2 nozzle.json | 2 - ...raft @WonderMaker ZR Ultra 0.2 nozzle.json | 2 - .../0.12mm Fine @WonderMaker ZR Ultra.json | 2 - .../process/0.12mm Fine @WonderMaker ZR.json | 2 - ...xtra Draft @WonderMaker ZR 0.2 nozzle.json | 2 - ...raft @WonderMaker ZR Ultra 0.2 nozzle.json | 2 - .../0.16mm Optimal @WonderMaker ZR Ultra.json | 2 - .../0.16mm Optimal @WonderMaker ZR.json | 2 - ....18mm Fine @WonderMaker ZR 0.6 nozzle.json | 2 - ...Fine @WonderMaker ZR Ultra 0.6 nozzle.json | 2 - ...0.20mm Standard @WonderMaker ZR Ultra.json | 2 - .../0.20mm Standard @WonderMaker ZR.json | 2 - .../0.24mm Draft @WonderMaker ZR Ultra.json | 2 - .../process/0.24mm Draft @WonderMaker ZR.json | 2 - ....24mm Fine @WonderMaker ZR 0.8 nozzle.json | 2 - ...Fine @WonderMaker ZR Ultra 0.8 nozzle.json | 2 - ...mm Optimal @WonderMaker ZR 0.6 nozzle.json | 2 - ...imal @WonderMaker ZR Ultra 0.6 nozzle.json | 2 - ...8mm Extra Draft @WonderMaker ZR Ultra.json | 2 - .../0.28mm Extra Draft @WonderMaker ZR.json | 2 - ...m Standard @WonderMaker ZR 0.6 nozzle.json | 2 - ...dard @WonderMaker ZR Ultra 0.6 nozzle.json | 2 - ...mm Optimal @WonderMaker ZR 0.8 nozzle.json | 2 - ...imal @WonderMaker ZR Ultra 0.8 nozzle.json | 2 - ...36mm Draft @WonderMaker ZR 0.6 nozzle.json | 2 - ...raft @WonderMaker ZR Ultra 0.6 nozzle.json | 2 - ...m Standard @WonderMaker ZR 0.8 nozzle.json | 2 - ...dard @WonderMaker ZR Ultra 0.8 nozzle.json | 2 - ...xtra Draft @WonderMaker ZR 0.6 nozzle.json | 2 - ...raft @WonderMaker ZR Ultra 0.6 nozzle.json | 2 - ...48mm Draft @WonderMaker ZR 0.8 nozzle.json | 2 - ...raft @WonderMaker ZR Ultra 0.8 nozzle.json | 2 - ...xtra Draft @WonderMaker ZR 0.8 nozzle.json | 2 - ...raft @WonderMaker ZR Ultra 0.8 nozzle.json | 2 - .../process/fdm_process_common.json | 3 - .../process/fdm_process_wm_common.json | 1 - resources/profiles/Z-Bolt.json | 2 +- .../Z-Bolt/machine/fdm_machine_common.json | 2 - .../0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json | 2 - ....08mm High Quality @Z-Bolt 0.4 nozzle.json | 2 - .../0.12mm Fine @Z-Bolt 0.4 nozzle.json | 2 - ....12mm High Quality @Z-Bolt 0.4 nozzle.json | 2 - ....16mm High Quality @Z-Bolt 0.4 nozzle.json | 2 - ....16mm High Quality @Z-Bolt 0.6 nozzle.json | 2 - .../0.16mm Optimal @Z-Bolt 0.4 nozzle.json | 2 - .../0.16mm Standard @Z-Bolt 0.6 nozzle.json | 2 - ...16mm Standard @Z-Bolt S300 0.6 nozzle.json | 2 - ...16mm Standard @Z-Bolt S400 0.6 nozzle.json | 2 - ...16mm Standard @Z-Bolt S600 0.6 nozzle.json | 2 - ...16mm Standard @Z-Bolt S800 0.6 nozzle.json | 2 - ....20mm High Quality @Z-Bolt 0.6 nozzle.json | 2 - .../0.20mm Standard @Z-Bolt 0.4 nozzle.json | 2 - .../0.20mm Standard @Z-Bolt 0.6 nozzle.json | 2 - ...20mm Standard @Z-Bolt S300 0.6 nozzle.json | 2 - ...20mm Standard @Z-Bolt S400 0.6 nozzle.json | 2 - ...20mm Standard @Z-Bolt S600 0.6 nozzle.json | 2 - ...20mm Standard @Z-Bolt S800 0.6 nozzle.json | 2 - .../0.20mm Strength @Z-Bolt 0.4 nozzle.json | 2 - .../0.24mm Draft @Z-Bolt 0.4 nozzle.json | 2 - .../0.24mm Standard @Z-Bolt 0.6 nozzle.json | 2 - .../0.24mm Standard @Z-Bolt 0.8 nozzle.json | 2 - ...24mm Standard @Z-Bolt S300 0.6 nozzle.json | 2 - ...24mm Standard @Z-Bolt S300 0.8 nozzle.json | 2 - ...24mm Standard @Z-Bolt S400 0.6 nozzle.json | 2 - ...24mm Standard @Z-Bolt S400 0.8 nozzle.json | 2 - ...24mm Standard @Z-Bolt S600 0.6 nozzle.json | 2 - ...24mm Standard @Z-Bolt S600 0.8 nozzle.json | 2 - ...24mm Standard @Z-Bolt S800 0.6 nozzle.json | 2 - ...24mm Standard @Z-Bolt S800 0.8 nozzle.json | 2 - ...0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json | 2 - .../0.30mm Standard @Z-Bolt 0.6 nozzle.json | 2 - ...30mm Standard @Z-Bolt S300 0.6 nozzle.json | 2 - ...30mm Standard @Z-Bolt S400 0.6 nozzle.json | 2 - ...30mm Standard @Z-Bolt S600 0.6 nozzle.json | 2 - ...30mm Standard @Z-Bolt S800 0.6 nozzle.json | 2 - .../0.30mm Strength @Z-Bolt 0.6 nozzle.json | 2 - ...30mm Strength @Z-Bolt S300 0.6 nozzle.json | 2 - ...30mm Strength @Z-Bolt S400 0.6 nozzle.json | 2 - ...30mm Strength @Z-Bolt S600 0.6 nozzle.json | 2 - ...30mm Strength @Z-Bolt S800 0.6 nozzle.json | 2 - .../0.32mm Standard @Z-Bolt 0.8 nozzle.json | 2 - ...32mm Standard @Z-Bolt S300 0.8 nozzle.json | 2 - ...32mm Standard @Z-Bolt S400 0.8 nozzle.json | 2 - ...32mm Standard @Z-Bolt S600 0.8 nozzle.json | 2 - ...32mm Standard @Z-Bolt S800 0.8 nozzle.json | 2 - .../0.36mm Standard @Z-Bolt 0.6 nozzle.json | 2 - ...36mm Standard @Z-Bolt S300 0.6 nozzle.json | 2 - ...36mm Standard @Z-Bolt S400 0.6 nozzle.json | 2 - ...36mm Standard @Z-Bolt S600 0.6 nozzle.json | 2 - ...36mm Standard @Z-Bolt S800 0.6 nozzle.json | 2 - .../0.40mm Standard @Z-Bolt 0.8 nozzle.json | 2 - ...40mm Standard @Z-Bolt S300 0.8 nozzle.json | 2 - ...40mm Standard @Z-Bolt S400 0.8 nozzle.json | 2 - ...40mm Standard @Z-Bolt S600 0.8 nozzle.json | 2 - ...40mm Standard @Z-Bolt S800 0.8 nozzle.json | 2 - .../0.42mm Standard @Z-Bolt 0.6 nozzle.json | 2 - ...42mm Standard @Z-Bolt S300 0.6 nozzle.json | 2 - ...42mm Standard @Z-Bolt S400 0.6 nozzle.json | 2 - ...42mm Standard @Z-Bolt S600 0.6 nozzle.json | 2 - ...42mm Standard @Z-Bolt S800 0.6 nozzle.json | 2 - .../0.48mm Standard @Z-Bolt 0.8 nozzle.json | 2 - ...48mm Standard @Z-Bolt S300 0.8 nozzle.json | 2 - ...48mm Standard @Z-Bolt S400 0.8 nozzle.json | 2 - ...48mm Standard @Z-Bolt S600 0.8 nozzle.json | 2 - ...48mm Standard @Z-Bolt S800 0.8 nozzle.json | 2 - .../Z-Bolt/process/fdm_process_common.json | 3 - .../process/fdm_process_zbolt_common.json | 1 - resources/profiles/iQ.json | 2 +- .../iQ/filament/fdm_filament_common.json | 6 - resources/profiles/iQ/machine/TiQ2.json | 2 +- resources/profiles/iQ/machine/TiQ8.json | 2 +- .../profiles/iQ/machine/fdm_tiq_common.json | 1 - .../iQ/process/fdm_process_tiq_common.json | 2 - resources/profiles/re3D.json | 2 +- .../re3D/machine/fdm_machine_common.json | 7 +- .../re3D/machine/fgf_re3D_common.json | 5 +- .../re3D/process/fdm_process_common.json | 1 - .../re3D/process/fdm_process_re3D_common.json | 171 +++-- .../re3D/process/fgf_process_re3D_common.json | 5 +- scripts/orca_profile_tool.py | 111 +-- scripts/tests/test_filament_id.py | 4 +- scripts/tests/test_profile_tool.py | 124 +++- src/libslic3r/PresetBundle.cpp | 67 ++ src/libslic3r/PresetBundle.hpp | 5 + .../libslic3r/test_preset_bundle_loading.cpp | 101 +++ 2135 files changed, 85633 insertions(+), 87858 deletions(-) create mode 100644 .claude/skills/orca-profiles/SKILL.md create mode 100644 .claude/skills/orca-profiles/references/filament-profiles.md create mode 100644 .claude/skills/orca-profiles/references/ids.md create mode 100644 .claude/skills/orca-profiles/references/machine-profiles.md create mode 100644 .claude/skills/orca-profiles/references/process-profiles.md create mode 100644 .claude/skills/orca-profiles/references/review-checklist.md create mode 100644 .claude/skills/orca-profiles/references/validation.md create mode 100644 .claude/skills/orca-profiles/references/vendor-bundle.md diff --git a/.claude/skills/orca-profiles/SKILL.md b/.claude/skills/orca-profiles/SKILL.md new file mode 100644 index 0000000000..18d9fc0adc --- /dev/null +++ b/.claude/skills/orca-profiles/SKILL.md @@ -0,0 +1,120 @@ +--- +name: orca-profiles +description: Use when creating, modifying, reviewing or debugging OrcaSlicer FFF system profiles under resources/profiles, including printer/vendor/nozzle/material additions, bundle indexes and versions, preset renames, setting_id, filament_id and filament_id_snapshot.json. Also use for missing presets or vendors, ignored profile settings, ambiguous AMS filament matches, and failures from orca_profile_tool.py, check_profile.sh/.bat, OrcaSlicer_profile_validator or the Check profiles CI job. +--- + +# OrcaSlicer system profiles + +A bundle is `resources/profiles/.json` plus `/`. The vendor id is the +filename stem, not the index's display `name`. The index is the loader's only entry point: +unindexed presets never load. `OrcaFilamentLibrary` is the shared filament bundle; +`blacklist.json` is data, not a bundle. + +## Choose the reference for the task + +Read the relevant reference before editing; load others only when the task crosses those areas. +Paths below are relative to this skill. Commands run from the repository root. + +| Task | Read | +| --- | --- | +| Add or tune a filament, brand or material; fix compatibility / alias shadowing | [filament-profiles.md](references/filament-profiles.md) | +| Add a printer or nozzle; change models, variants, assets or extruder vectors | [machine-profiles.md](references/machine-profiles.md) | +| Add a quality tier or tune a process | [process-profiles.md](references/process-profiles.md) | +| Create a vendor bundle; diagnose loading or inheritance; migrate preset names | [vendor-bundle.md](references/vendor-bundle.md) | +| Change ids or snapshot claims; diagnose AMS identity | [ids.md](references/ids.md), then `docs/HLSD/filament_id.md` for identity changes | +| Review a profile diff | [review-checklist.md](references/review-checklist.md) | +| Run checks, interpret failures, test another tree or verify in the app | [validation.md](references/validation.md) | + +## Golden rules + +1. **Bump every changed bundle's `version`**, including `OrcaFilamentLibrary.json` when affected. + Increment the last component; carry `.99` into the third component (`02.04.00.99` → + `02.04.01.00`). The updater requires a strictly newer version. CI does not check this. +2. **Register every preset, bases included, parents before children.** `update-index` generates + the four `*_list` arrays; `check` requires its output. Index names must equal file `name` fields. +3. **Generate ids; never invent or copy them.** Keep existing ids during ordinary tuning. New + presets normally omit them until `generate-id`; bases must have no `setting_id`. + BBL's authoritative `setting_id` and a wrongly inherited `filament_id` need the explicit + handling in [ids.md](references/ids.md). +4. **Load failures can discard a whole vendor bundle.** Broken `inherits`, missing indexed files, + duplicate names, invalid model/variant references and unresolved filament ids affect more than + the edited preset. Inheritance stays within a bundle, except filaments may inherit the library. +5. **Preserve shipped selectable names.** Renaming, deleting or changing `instantiation` from + `"true"` to `"false"` needs `renamed_from` on a selectable successor. It is a `;`-separated string; + update in-tree references too. See [migration rules](references/vendor-bundle.md#renamed_from). +6. **Compatibility uses exact printer variant names.** Every instantiated non-library filament + needs a non-empty `compatible_printers` in its own file. Library fallbacks may omit it; + library printer-specific tunes use a non-empty list. Keep same-product tunes disjoint. +7. **Preset values are strings or arrays of strings.** Use `"instantiation": "false"`, not `false`. + Model `nozzle_diameter` is a `;`-separated string; machine `nozzle_diameter` is an array. + Wrong types can abort loading; see [failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius). +8. **Verify setting keys against the code.** Unknown keys are silently discarded. Check + `PrintConfig.cpp` definitions and `PrintConfigDef::handle_legacy`; neighbours can contain dead + keys. `normalize` removes known obsolete keys, but does not detect arbitrary misspellings. +9. **Run the full profile checks before reporting completion.** A vendor-scoped pass is only a + development loop. Review also covers version bumps, assets, non-default processes and hardware + tuning that CI cannot establish. + +## Creating or modifying a profile + +1. **Inspect the diff and neighbouring presets.** Read their `name`, parent chain and children; + edits to a base or a leaf with descendants propagate. Match the bundle's structure and write + only overrides. New files use tab indentation, LF and a trailing newline; preserve unrelated + formatting in existing files. Match filename case exactly and use cross-platform names. +2. **Author explicit metadata.** Set `type` yourself, especially for `machine` vs `machine_model`. + Use `"from": "system"` and string `instantiation` on config presets. Omit ids on new presets + unless [ids.md](references/ids.md) requires special handling; retain them on existing ones. + Complete compatibility, defaults, assets and any rename migration using the task reference. +3. **Bump the version**, then run the authoring commands in order for each affected bundle: + + ```bash + python3 scripts/orca_profile_tool.py normalize --vendor "" + python3 scripts/orca_profile_tool.py update-index --vendor "" + python3 scripts/orca_profile_tool.py generate-id --vendor "" + python3 scripts/orca_profile_tool.py update-snapshot + python3 scripts/orca_profile_tool.py check + ``` + + Writing commands support `--dry-run`. Inspect their diffs: `normalize` changes content and can + reformat entire files. `update-snapshot` is tree-wide; include its diff whenever a filament id + **or claim** changes, even if no new id was minted. Skip it when filament identity and claims + are unchanged. Stop and resolve command errors before proceeding. + + **Do not use `trim` in this workflow:** it can delete newly authored, unindexed profiles. + Do not use `normalize --force` for routine edits. +4. **Validate:** + + ```bash + ./scripts/check_profile.sh --vendor "" # development loop + ./scripts/check_profile.sh # full tree before the PR + ``` + + On Windows use `py -3` instead of `python3`, and `scripts\check_profile.bat -Vendor ""` + / `scripts\check_profile.bat`. Logs: `.test/check_profiles/logs/.log`. + Id checks remain tree-wide under `--vendor`; filament-only bundles skip the default slice check. + See [validation.md](references/validation.md) for flags, coverage and error remedies. +5. **Verify the changed behavior.** Slice newly added non-default processes explicitly, and + [test in the app](references/validation.md#testing-in-the-app) for selection or UI behavior. + Report checks actually run, failures/skips and any hardware tuning still unverified. + +## Symptom → first reference + +| Symptom | Start here | +| --- | --- | +| A vendor disappears | Loader log / `validate_system`; [bundle failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius) | +| A setting has no effect | Key spelling/type, `handle_legacy`, or a config key placed on a `machine_model` | +| A preset exists but is not selectable | Index registration, `instantiation`, installation and compatibility | +| A filament is missing, duplicated, or matches the wrong spool | [Compatibility and alias shadowing](references/filament-profiles.md#compatible_printers); [ids](references/ids.md) | +| A bed temperature is ignored | [Plate-specific temperature keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) | +| A change is absent from the running app | Version bump and [installed profile location](references/validation.md#testing-in-the-app) | +| A check fails | [Error → remedy](references/validation.md#error--remedy) | + +## Source of truth + +When guidance and behavior disagree, inspect the current checkout: +`scripts/orca_profile_tool.py` for tooling and flags; `src/libslic3r/Preset*.cpp` for loading and +compatibility; `src/libslic3r/PrintConfig.cpp` for setting types and legacy handling; +`src/dev-utils/OrcaSlicer_profile_validator.cpp` and `.github/workflows/check_profiles.yml` for +validation coverage. `docs/HLSD/filament_id.md` defines filament identity. The +[profile development guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/how_to_create_profiles.md) +is a tutorial; confirm loader and CLI details against these sources. diff --git a/.claude/skills/orca-profiles/references/filament-profiles.md b/.claude/skills/orca-profiles/references/filament-profiles.md new file mode 100644 index 0000000000..b3f6acd4c4 --- /dev/null +++ b/.claude/skills/orca-profiles/references/filament-profiles.md @@ -0,0 +1,207 @@ +# Filament profiles and OrcaFilamentLibrary + +`OrcaFilamentLibrary` is the filament-only bundle the loader reads **first**; its config map +becomes the base bundle, so any vendor may inherit a library preset by name. It is the only cross-bundle +parent — vendor-to-vendor inheritance always fails. + +## Where a filament goes + +| Contribution | Location | +| --- | --- | +| Generic material for all printers | `OrcaFilamentLibrary/filament/Generic @System.json` | +| A brand's product, all printers | `OrcaFilamentLibrary/filament//` | +| A brand's tune for one printer | `OrcaFilamentLibrary/filament///` — recommended; `/filament//` also works | +| A printer vendor's tune of a generic or its own product | `/filament/` | + +Both locations for the last-but-one row are supported: `OrcaFilamentLibrary/filament///.json` +(the shape the wiki shows) and `/filament//`. The library path is the one a +filament vendor should contribute to — `OrcaFilamentLibrary/filament//` is the brand's own +folder, while a printer vendor's folder belongs to that printer vendor. Brand tunes do ship under +printer vendors' folders today (Polymaker and SUNLU among others). + +Library layout: `filament/base/fdm_filament_*.json` type roots, root-level `Generic @System.json` +generics, and one subfolder per brand, which may nest printer-specific tunes one level deeper. Adding +a brand means adding a folder here; the folder name is a directory label only — `filament_vendor` inside the JSON is the real vendor string. + +## The three-part shape + +```jsonc +// Fiberon PA6-CF @base.json — the product root, holds identity + material values +{ "type": "filament", "name": "Fiberon PA6-CF @base", "from": "system", + "instantiation": "false", "inherits": "fdm_filament_pa", + "filament_id": "OFkOviHk", // generated here; variants inherit it + "filament_vendor": ["Polymaker"], "filament_type": ["PA6-CF"], /* … */ } + +// Fiberon PA6-CF @System.json — the selectable shim, 7 keys +{ "type": "filament", "name": "Fiberon PA6-CF @System", "from": "system", + "instantiation": "true", "inherits": "Fiberon PA6-CF @base", + "setting_id": "…", "compatible_printers": [] } + +// /filament/Polymaker/Fiberon PA6-CF @BBL X1C.json — a printer tune +{ … "inherits": "Fiberon PA6-CF @base", "filament_max_volumetric_speed": ["14"], + "compatible_printers": ["Bambu Lab X1 Carbon 0.4 nozzle", …] } +``` + +- `@base` is the convention for a root. A base carries **no** `setting_id`, no `compatible_printers`, no + `filament_settings_id`. Only the `setting_id` half is enforced, and nothing violates it; the other two + are unchecked and plenty of bases still carry them. Do not copy that from a neighbouring file. +- Every `@System` must be `"instantiation": "true"`. DREMC ships `@System` presets set to `"false"`, + which therefore ship but can never be selected; no check catches it. +- A duplicated brand `@base` across bundles is normal and intentional (`Fiberon PA6-CF @base` exists in + both the library and BBL with the same id, differing only in MVS) — bases never enter the preset + collection, so there is no duplicate-name error. +- You may inherit from an instantiated preset as well as from a base; it is common. + +## The two most common contributions + +**A printer vendor tuning a generic.** Keep the `Generic X` base name so the alias shadows the library +preset on your printers, inherit `Generic X @System`, declare **no** `filament_id` (inheriting the +library's is correct — the product really is the library's generic), and give it a non-empty +`compatible_printers` in its own body: + +```jsonc +// /filament/Generic PETG @Acme One 0.4 nozzle.json +{ "type": "filament", "name": "Generic PETG @Acme One 0.4 nozzle", "from": "system", + "instantiation": "true", "inherits": "Generic PETG @System", + "filament_flow_ratio": ["0.95"], "filament_max_volumetric_speed": ["10"], + "compatible_printers": ["Acme One 0.4 nozzle"] } +``` + +**A printer vendor's own branded product.** Give it a `@base` root so `generate-id` can mint the id (see +[ids.md](ids.md) — inheriting `Generic X @System` directly makes the id unfixable by the tool), then one +instantiated leaf per printer in the same bundle. No `@System` shim: that is only for a product entering +OrcaFilamentLibrary. + +```jsonc +// /filament/Acme Aura PETG @base.json — instantiation false, no setting_id +{ "type": "filament", "name": "Acme Aura PETG @base", "from": "system", + "instantiation": "false", "inherits": "fdm_filament_pet", + "filament_vendor": ["Acme"], "filament_type": ["PETG"] } // filament_id minted here + +// /filament/Acme Aura PETG @Acme One 0.4 nozzle.json +{ "type": "filament", "name": "Acme Aura PETG @Acme One 0.4 nozzle", "from": "system", + "instantiation": "true", "inherits": "Acme Aura PETG @base", + "filament_max_volumetric_speed": ["11"], + "compatible_printers": ["Acme One 0.4 nozzle"] } +``` + +Omit `filament_settings_id` from new presets — it is runtime bookkeeping the app rewrites to the preset +name. + +## `compatible_printers` + +- **Library fallbacks:** empty `[]` or absent, so they are offered on all printers except where + [alias shadowing](#alias-shadowing) supplies a printer-specific tune. +- **Library printer-specific tunes:** non-empty, listing exact printer **variant** names. These can + supersede a same-alias fallback just like a tune in a printer vendor's bundle. +- **Instantiated filaments in every other vendor:** non-empty, listing exact printer **variant** names. + Enforced twice but not identically: the C++ `has_errors` reads the *flattened* config, so an inherited list satisfies it, + while the Python check reads the file's **own** key. Write the list in the file itself. This is the + most common filament CI failure. +- Emptying it to "make it apply everywhere" fails that check *and* creates a duplicate-`filament_id` + collision against the library generic on every printer. +- Copying a base's full printer list onto a nozzle-specific variant produces duplicate combobox entries — + a real shipped bug twice over. + +## Alias shadowing + +A printer-specific filament in either the library or a vendor bundle supersedes the library fallback +on the printers it lists. The matching key is the **alias**: the preset name up to the **first** `@`, +right-trimmed (no `@` → the whole name). So +`QIDI ABS-GF@Q2-Series` aliases to `QIDI ABS-GF`. + +A library preset with an empty `compatible_printers` collects, into `m_excluded_from`, every printer named +by any same-alias preset that *has* a non-empty list, and is then hidden on those printers. + +Two consequences: + +- **Only an unrestricted library fallback can be shadowed.** Two printer-specific presets sharing + an alias do not exclude each other — overlapping lists for the same product trip the + duplicate-`filament_id` check instead. +- This is why adding `Generic PLA @` to a vendor silently removes the library `Generic PLA` + from that printer. Intended — and the reason a vendor tuning a generic must **keep the `Generic X` + base name**. + +The literal spelling `Generic @System` is load-bearing beyond shadowing: `find_preset2` rewrites an +unresolved name containing "Generic" into that form and retries against the library, which is how 3MF +and project recovery works. + +## `filament_id`, `filament_vendor`, `filament_type` + +`filament_id` is minted from the triple `(filament_vendor, filament_type, name-before-first-@)`. +`filament_vendor` and `filament_type` are therefore **identity, not decoration** — editing either +re-mints the id. Read `docs/HLSD/filament_id.md` before changing any of them, and see +[ids.md](ids.md) for the tooling. + +A filament with no resolvable `filament_id` anywhere in its `inherits` chain is a **hard load error** that +discards the vendor bundle. The id inherits across bundles, so a vendor's `Generic ABS @X` inheriting +`Generic ABS @System` gets the library's id for free; a vendor's own product must resolve its own. + +- `filament_type` **must be a JSON array** — the one vector key the Python check enforces. A scalar + `"PP"` once hung the filament/printer selection UI. +- It is an **open** enum: an unlisted value is accepted silently and falls back to 190–300 °C defaults + and adhesion 1.0. Off-list values do ship. Prefer a value from `MaterialType::all()` in + `src/libslic3r/MaterialType.cpp`, or add a row there. +- Generics use `filament_vendor: ["Generic"]`, which `fdm_filament_common` already defaults to. + +## `"nil"` + +Legal in any key whose `ConfigOptionDef` is `nullable`. In a filament preset that is most of the +`filament_*` family, plus `long_retractions_when_ec` and `retraction_distances_when_ec`. About half are +the extruder overrides (`filament_retraction_length`, `filament_z_hop`, `filament_wipe`, +`filament_retract_*`, `filament_retraction_speed`, `filament_deretraction_speed`, +`filament_retraction_minimum_travel`, `filament_wipe_distance`, `filament_long_retractions_when_cut`, +`filament_retraction_distances_when_cut`, …), where `nil` means *keep the printer/extruder's own value*. +The rest are ordinary nullable options (`filament_flow_ratio`, `filament_flush_temp`, +`filament_adaptive_volumetric_speed`, …) where it means *unset*. + +Anywhere else it throws `Deserializing nil into a non-nullable object`. To not set a non-nullable key, +omit it — do not write `nil`. + +## What to review per nozzle + +Across `@X` / `@X 0.N nozzle` sibling pairs the keys that differ, most often first, are +`filament_max_volumetric_speed`, `filament_retraction_length`, `slow_down_min_speed`, +`filament_flow_ratio`, `slow_down_layer_time`, `nozzle_temperature` and `pressure_advance`. +`filament_cost`, `filament_density`, `filament_type` and `filament_vendor` belong on the `@base` and +should not appear in a printer tune. + +Use measured values for the material, hotend, extruder and nozzle combination. Neither maximum +volumetric speed nor pressure advance has a universal nozzle-only lookup table. When cloning a +0.4 preset for a 0.2 nozzle, explicitly revisit flow limits; do not infer a pressure-advance value +or a required direction of change from diameter alone. + +## Style + +Overrides, not full copies: a typical instantiated filament preset carries around a dozen non-meta keys, +and a library leaf two or three. Presets that restate fifty-plus keys from their parent do still ship — +Phrozen's single filament preset is that style — but they are the pattern to move away from, not to +copy. Commit `6943b6ddc3` is the stated model (flip true bases to `instantiation: "false"`, strip +`compatible_printers`/`setting_id`/`filament_settings_id`, add `renamed_from` on the survivor). + +Prefer the library's `fdm_filament_*` bases over a vendor-local copy. Phrozen's local +`fdm_filament_common` has drifted from the library's. + +Canonical key order, written by `orca_profile_tool.py normalize` when it rewrites a file: `type`, `name`, +`renamed_from`, `inherits`, `from`, `setting_id`, `filament_id`, `instantiation`, then everything else in +the order you wrote it. Not enforced — a file that leads with `compatible_printers` passes `check`. + +**Every vector-typed (`co*s`) key must be a JSON array.** Only `filament_type` is an outright error, but +`normalize` silently arrayifies five more (`filament_cost`, `filament_density`, +`temperature_vitrification`, `filament_max_volumetric_speed`, `filament_vendor`) and `check` fails when +it would. Every other vector key is on you — including `filament_start_gcode`, `filament_end_gcode`, +`filament_extruder_variant`, `compatible_printers` and the plate temperatures. + +## Bed temperature is twelve keys, not one + +There is no single "bed temperature". Which plate key applies depends on `curr_bed_type`, whose six +selectable values (`btPC`, `btEP`, `btPEI`, `btPTE`, `btPCT`, `btSuperTack`; `btDefault` maps to no key) +`get_bed_temp_key()` turns into `cool_plate_temp`, `eng_plate_temp`, `hot_plate_temp`, +`textured_plate_temp`, `textured_cool_plate_temp` and `supertack_plate_temp` — each with an +`*_initial_layer` twin. + +`textured_cool_plate_temp` is the one most often forgotten. A printer with `support_multi_bed_types` off +hides the selector, and the printer preset's +`default_bed_type` decides which plate is selected for it, but `curr_bed_type` can still hold a stale +value carried over from another printer — so set every plate the printer plausibly has, as the sibling +presets in the bundle do. diff --git a/.claude/skills/orca-profiles/references/ids.md b/.claude/skills/orca-profiles/references/ids.md new file mode 100644 index 0000000000..59560160f8 --- /dev/null +++ b/.claude/skills/orca-profiles/references/ids.md @@ -0,0 +1,183 @@ +# `setting_id` and `filament_id` + +Orca-generated ids are deterministic hashes of identity. **Never invent an id or copy a sibling's +`setting_id`.** Use `scripts/orca_profile_tool.py`; the two special cases are +[a wrongly inherited filament id](#what-generate-id-does-and-does-not-fix) and +[BBL's authoritative setting ids](#bbls-exception-precisely). + +`docs/HLSD/filament_id.md` is the authoritative design document for `filament_id` — the id landscape, the +snapshot as the maintainer gate, and the Bambu catalog map. This page is the tooling half. + +| | `setting_id` | `filament_id` | +| --- | --- | --- | +| Identifies | one selectable preset | one filament **product** | +| Key hashed | `//` | `filament_product///` | +| Shape | 16 base62 chars | `OF` + 6 base62 chars | +| Required on | every `instantiation: "true"` preset | every **instantiated** filament, own or inherited | +| Forbidden on | bases (`instantiation != "true"`) | — (a base is exactly where it belongs) | +| Scope | globally unique across the tree | shared by every variant of the product, in every bundle | + +`` is `machine` / `process` / `filament` — the vendor is the **folder** name (`BBL`), not the +display name (`Bambulab`). Renaming a preset changes its `setting_id`; renaming a filament, or editing +its `filament_vendor` or `filament_type`, also changes its `filament_id`. + +## The tool + +Use `scripts/orca_profile_tool.py` with a subcommand: + +| Command | Does | +| --- | --- | +| `check` | everything CI's `profile_tool` step runs — see [validation.md](validation.md) | +| `generate-id` | writes `setting_id` and `filament_id` | +| `normalize` | rewrites profile files into their canonical shape | +| `trim` | deletes profile files no `.json` list references | +| `update-index` | rebuilds the `*_list` sections from the files on disk | +| `update-snapshot` | re-records `scripts/filament_id_snapshot.json` | + +The order after adding, renaming or deleting files — each step feeds the next, so it is not +interchangeable — is `normalize` → `update-index` → `generate-id` → `update-snapshot` → `check`. +The [authoring workflow](../SKILL.md#creating-or-modifying-a-profile) has the commands; +`update-snapshot` is needed when filament ids or claims change. + +> **`trim` deletes.** It removes every profile file the index does not list — including the one you just +> added and have not registered yet. Register first, or skip `trim` entirely; it is a cleanup sweep, not +> part of landing a profile. Preview with `--dry-run`. + +**Register, then mint.** The `filament_id` pass reads `.json`'s `filament_list`, not the +filesystem (the `setting_id` pass walks the filesystem, so a bundle whose index has not landed yet is +still assignable). A new filament file is therefore invisible to `generate-id`'s filament_id pass until +it is registered — its `setting_id` is written regardless. + +- `--dry-run` works on every writing command (`generate-id`, `normalize`, `trim`, `update-index`, + `update-snapshot`) and writes nothing. +- `--filament-id` / `--setting-id` narrow `generate-id`; they exclude each other, and passing neither + writes both. +- `--vendor` is repeatable and narrows **only what is written** — the id is a function of the triple + alone, so a narrowed run writes exactly what a full run would. An unknown vendor exits 1 before any + write. `--vendor` on `check` narrows the per-vendor checks only; the `setting_id` and `filament_id` + passes stay tree-wide. `update-snapshot` takes no `--vendor` at all. +- `--profiles DIR` points any command at another tree — with the `--snapshot` companion rule, see + [Checking a copy of the tree](validation.md#checking-a-copy-of-the-tree). +- `--profile-type` narrows `normalize`, `trim` and `update-index` to `machine_model`, `process`, + `filament` or `machine`. +- Exit codes: 0 clean, 1 errors found (`generate-id` still writes what it could), 2 argparse misuse. +- Output is ANSI-coloured; searching for the literal `[ERROR]` still works. + +`generate-id` is **idempotent and byte-preserving** — BOM and CRLF kept, one key line touched per pass. +A legitimate `generate-id` diff is one or two changed lines per file: a new instantiated filament gets +both a `filament_id` and a `setting_id`, and a BBL file with a misspelled `settings_id` has that line +dropped and its value restored under the right key. `normalize` is the opposite by design — it rewrites +whole files into canonical shape — which is why `check` demands it already be a no-op. Some bundles have +CRLF committed (OrcaFilamentLibrary, Anycubic and RH3D among them), so a `normalize` pass there rewrites +every line — read the diff before committing it. + +On a clean tree `check`, `generate-id --dry-run` and `update-snapshot --dry-run` all exit 0 with zero +findings. That is the baseline to restore before opening a PR. + +## What `generate-id` does and does not fix + +Writes: + +- a `setting_id` into any instantiated preset that lacks one, or whose value does not match the formula; +- strips a `setting_id` from a base; +- deletes the misspelled `settings_id` key; +- a `filament_id` into the id-less **root(s)** of an instantiated filament that resolves none; +- rewrites a **declared** `filament_id` that is not the mint of its own triple. + +Refuses to write (reports only): a base62 collision between two products, an empty `filament_vendor` or +`filament_type`, a broken `inherits` chain, roots of one filament resolving divergent `(vendor, type)` +pairs. + +**Does not fix: a preset that *inherits* a wrong `filament_id`.** This is check 3b, and it is the trap +most likely to bite. It happens when a branded filament inherits a generic for its settings: + +```jsonc +{ "name": "Phrozen Aura PETG @Phrozen Arco 0.4 nozzle", + "inherits": "Generic PETG @System" } // resolves the OFL generic's id — wrong product +``` + +The preset resolves *an* id, so `generate-id` neither inserts nor rewrites, and `check` fails with +`inherits filament_id "X" but its own triple "V/T/N" mints "Y"`. + +Two fixes, in order of preference: + +1. **Give the product a `@base` root** inheriting a material base (`fdm_filament_pet`, + `fdm_filament_pla`, …). No `fdm_filament_*` base carries a `filament_id`, so the filament now resolves + none and `generate-id` mints it for you. This is also the shape the rest of the tree uses. +2. **Declare the tool-computed key on the preset itself.** Use the expected value reported by `check` + or compute it with the function below; this is not a manually chosen id. Make sure the preset + resolves the right `filament_vendor` and `filament_type` first — with + neither set, the triple resolves through the generic parent and the branded product is minted, and + then sanctioned in the snapshot, under vendor `Generic`. If you need the id before the file exists: + + ```bash + python3 -c "import sys; sys.path.insert(0,'scripts'); from orca_profile_tool import generate_filament_id as g; print(g('Polymaker','PLA','PolyLite PLA'))" + # -> OF5CgdDq + ``` + + The quoting works unchanged in cmd and PowerShell; only swap `python3` for `py -3`. + + The `setting_id` equivalent is `generate_preset_setting_id('', '', '')`. + +## The snapshot + +`scripts/filament_id_snapshot.json` is the sanctioned state: the id landscape derived from the tree must +equal it exactly, in both directions. **Any change to a filament id or its claims must be committed with +the profiles.** + +To trace an id from an error, search for it in the snapshot. Each entry records its identity triple +and `/` claims, one per bundle/product pair rather than per preset. + +```bash +python3 scripts/orca_profile_tool.py update-snapshot +``` + +Never hand-edit it. It is regenerated deterministically (1-space indent, LF, id-sorted) and +refuses to write two states it could not record truthfully: a tree it could not read whole, and an id +declared under more than one triple. It does **not** judge the ids themselves — it records state, `check` +judges it, so a bad id lands in the diff and fails there instead. `generate-id` never touches the +snapshot, and reminds you with a warning **only when it actually wrote a `filament_id`** — not on a +`--dry-run`, and not when only `setting_id`s changed. + +Reviewing a snapshot diff: + +| Diff | Means | +| --- | --- | +| new id + new claim | a genuinely new product — confirm it is not a rename in disguise | +| id removed | a product left the tree, or its identity changed — the old id is not forwarded anywhere | +| triple changed under an existing id | `filament_vendor`/`filament_type`/name was edited; deliberate? | +| claim added/removed only | a bundle started or stopped shipping that product | + +An entry with an empty `filaments` list is legitimate — declared, but not yet claimed by an instantiated +preset. + +## BBL's exception, precisely + +`RESERVED_VENDORS = {"BBL"}` covers **`setting_id` assignment only**, keyed on the *folder* name: + +- The tool never mints or replaces a BBL `setting_id`. A new instantiated BBL preset with no + `setting_id` therefore **cannot be fixed by the tool**, yet the presence rule still applies to it — + carry over Bambu's authoritative id by hand. +- BBL is not exempt from anything else: bases still get their `setting_id` stripped, ids must still be + globally unique, and BBL `filament_id`s are minted like everyone else's — every id the snapshot records + as claimed by BBL is an `OF*`. + +## Ids other systems compose + +No id from another system is the mint of a triple, so `check` rejects it like any other bad id — same +error, same remedy, whoever wrote it. Three such spaces exist near the tree; recognise them so you do +not copy one into a profile: + +- **Bambu's `GF*` catalog** — external and opaque, correlated to Orca's ids by the generated + `resources/printers/bambu_filament_ids.json`. `GF` is a *prefix*, not a spelling the tree avoids: most + BBL `setting_id`s start with `G`, and `blacklist.json` and + `BBL/filament/filaments_color_codes.json` both reference Bambu catalog ids by design. The rule is + about `filament_id` and nothing else. +- **Qidi's `QD_*`** — composed at runtime by the box (`QD___`), not a preset id. +- **`P` + 7 hex, and `"null"`** — what `CreatePresetsDialog.cpp` gives a *user*-created filament. + +## Tests + +`python3 -m unittest discover -s scripts/tests -t scripts` (`py -3 -m …` on Windows). Note the +`-t scripts` argument; without it the imports fail. CI runs them as the first, non-`continue-on-error` +step of the profile job — see [validation.md](validation.md#ci). diff --git a/.claude/skills/orca-profiles/references/machine-profiles.md b/.claude/skills/orca-profiles/references/machine-profiles.md new file mode 100644 index 0000000000..01071af6b1 --- /dev/null +++ b/.claude/skills/orca-profiles/references/machine-profiles.md @@ -0,0 +1,194 @@ +# Printer models and variants + +Both live in `resources/profiles//machine/*.json`; models go in `machine_model_list`, variants +and shared bases in `machine_list`. Every one of them is registered. Some vendors (Elegoo, Eryone, +InfiMech, FlyingBear) nest a further subfolder under `machine/`, so recurse rather than globbing +`machine/*.json`. + +## A `machine_model` is not a config preset + +It is parsed by a hand-written key switch, and only these keys are stored (`version` and `url` are +matched and discarded): + +`name`, `model_id`, `nozzle_diameter`, `machine_tech`, `family`, `bed_model`, `bed_texture`, +`hotend_model`, `default_materials`, `not_support_bed_type`, `image_bed_type`, +`bottom_texture_end_name`, `bottom_texture_rect`, `bottom_texture_rect_longer`, `middle_texture_rect`, +`use_double_extruder_default_texture`. + +**Everything else is silently dropped.** Only `name` and `nozzle_diameter` are required. Dead keys ship +on real models today — `url`, `default_bed_type`, even a `desciption` typo — so a neighbour carrying a +key is no evidence it does anything. Printer config options belong on the `machine` preset, never here. + +```json +{ + "type": "machine_model", + "name": "Phrozen Arco", + "machine_tech": "FFF", + "family": "Phrozen", + "model_id": "Phrozen Arco", + "nozzle_diameter": "0.4", + "bed_model": "Phrozen Arco_buildplate_model.stl", + "bed_texture": "Phrozen Arco_buildplate_texture.svg", + "hotend_model": "", + "default_materials": "Generic PLA @Phrozen Arco 0.4 nozzle" +} +``` + +| Field | Notes | +| --- | --- | +| identity | **the `name` of the `machine_model_list` entry**, which is what a variant's `printer_model` must equal. `check_name_consistency` forces it to equal the file's `name`, so they coincide. | +| `model_id` | a *separate* cloud/device printer type. Optional, and not required to be unique. Not the model's identity. Changing it changes device matching. | +| `machine_tech` | only `starts_with("SL")` means SLA; everything else is FFF. Write `FFF`; a few models write `FGF`, which is a label with no effect. | +| `nozzle_diameter` | `;`-separated string, one token per available size. Order is free (Qidi writes `0.4;0.2;0.6;0.8` to put the default first). This list is the authoritative set of legal `printer_variant` values. | +| `default_materials` | `;`-separated filament **preset names**. Used to preselect in the wizard *and* by `PresetBundle::load_installed_filaments` to auto-install a printer's filaments on first run, so a dangling entry costs a real user a filament. Not `,`; case-sensitive (`@System`). `check` fails on a dangling name here or in `default_filament_profile`. | +| `family` | a wizard grouping label only; give every model one. | + +### Assets + +`bed_model`, `bed_texture` and `hotend_model` are paths relative to the **vendor folder** (by id). +Majority convention: `_buildplate_model.stl` and `_buildplate_texture.svg`. An empty string +is the legal "none", and is the norm for `hotend_model`. + +**Nothing checks that the file exists.** A missing `hotend_model` falls back to +`resources/profiles/hotend.stl`; a missing `bed_model`/`bed_texture` just renders nothing. Broken +references already ship. Verify by hand. + +Every model also has a `_cover.png` in the vendor folder — treat it as required, not optional. +240×240 is the cap `scripts/optimize_cover_images.py` enforces and the size most covers already use. +A missing cover degrades to a placeholder in both the wizard and the sidebar. + +## The `machine` variant + +```json +{ + "type": "machine", + "name": "Phrozen Arco 0.4 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "lvaYKTUZr5C9jSwk", + "instantiation": "true", + "printer_model": "Phrozen Arco", + "printer_variant": "0.4", + "nozzle_diameter": ["0.4"], + "default_print_profile": "0.20mm Standard @Phrozen Arco 0.4 nozzle", + "default_filament_profile": ["Generic PLA @Phrozen Arco 0.4 nozzle"], + "printable_area": ["0x0", "300x0", "300x300", "0x300"], + "printable_height": "300" +} +``` + +Minimum viable key set: `type`, `name`, `from`, `instantiation`, `setting_id`, `inherits`, +`printer_model`, `printer_variant`, `nozzle_diameter`, `printable_area`, `printable_height`, +`default_print_profile`. The four keys without which the preset will not load at all are `name`, +`instantiation`, `printer_model` and `printer_variant`; `default_filament_profile` is an array +(`["Generic PLA @System"]`) and the model's `default_materials` a `;`-separated string. Unlike a +`machine_model`, a `machine` **is** config-loaded, so a key belonging to another preset type is a +reported error (a misspelled key is still silent). + +### `printer_variant` — three hard rules + +1. Non-empty, and an exact member of the model's `;`-separated `nozzle_diameter` list. +2. `printer_model` non-empty and naming a model of this vendor. +3. In validation mode, for instantiated presets only: split `printer_variant` on `+`, each token must + start with a number (a trailing non-numeric suffix such as `HF` is ignored), and the resulting **set** + must equal `set(nozzle_diameter)`. + +Rules 1 and 2 are loader-enforced — failing either drops the preset *and* the whole bundle. Rule 3 only +raises a validation error: the preset still loads, but the validator exits non-zero. + +`nozzle_diameter` lists one entry **per physical nozzle**; `printer_variant` lists the **distinct** +diameters joined with `+`. Snapmaker U1 is the worked case: `["0.4","0.4","0.6","0.6"]` against +`"0.4+0.6"` — it passes because the comparison is on sets. + +The conventional values are `0.2`, `0.25`, `0.4`, `0.5`, `0.6`, `0.8` and `1.0`. Suffixed forms +(`0.4HF`, `0.6HF`, `0.8HF`, `0.4HS`) are Flashforge-only and the `+` form is rare. A variant is **not** +required to be unique within a model — Volumic ships `EXO42 IDRE`, `… COPY MODE` and `… MIRROR MODE` all +at `0.4` under the one model `EXO42 IDRE`. + +The converse is **unchecked**: a nozzle size in the model's list with no matching variant is offered in +the wizard and resolves to nothing. `Wanhao France`'s `D12 500 PRO M2 DIRECT` ships that bug today. + +### Other fields worth knowing + +- `default_print_profile` is a **scalar**, matched by exact preset name. Not a `;` list. The named + process must be compatible with this printer through its resolved list or condition. + `validate_slice` attempts to select it and rejects generic Default fallbacks, but compatibility + updates can choose another compatible preset. Check the exact default reference yourself. +- `default_filament_profile` is an **array**, one name per element. +- `printable_area` is an array of `"XxY"` strings — four points for a rectangle, one per segment for a + delta or circular bed. +- `gcode_flavor` is usually set once in the base; `klipper`, `marlin`, `marlin2` and `reprapfirmware` + cover nearly every shipped printer. +- `printer_settings_id` is junk — most files carrying it disagree with their own name. Do not copy it + when cloning a bundle. +- `min_layer_height` / `max_layer_height` are **machine** keys (per extruder), never process keys. + +## Bases + +Nearly every machine-bearing vendor registers a base literally named `fdm_machine_common`, and Klipper +vendors add `fdm_klipper_common` on top of it. Two levels is the usual depth. + +**There is no leading-underscore convention for bases.** + +## Adding a printer to an existing bundle + +1. Choose the names first — model, variant(s), process(es); everything else references them. +2. Add the model (`machine_model_list`) and one `machine` variant per nozzle; the minimum key sets are + above. Bed assets and `_cover.png` go directly in `/`. +3. Add at least one process per variant naming it in `compatible_printers` + ([process-profiles.md](process-profiles.md#adding-a-quality-tier-or-a-nozzles-processes)). +4. Register everything (or run `update-index`), bump the version, run the id tool, validate. + +## Adding a nozzle variant + +1. Extend the model's `nozzle_diameter` (`"0.4"` → `"0.4;0.6"`). +2. Add the variant preset. Either inherit the shared base (the usual choice) or the 0.4 sibling (Elegoo, + BBL, Prusa and Qidi do this — smaller diff, but the sibling's edits now reach this file too). +3. Override what actually changes with nozzle: `nozzle_diameter`, `printer_variant`, + `default_print_profile`, `default_filament_profile`, `min_layer_height`/`max_layer_height`, and + retraction if the vendor tunes it. +4. Add at least one process for the new nozzle — see [process-profiles.md](process-profiles.md). +5. Register both, bump the version, run the id tool, validate. + +## Multi-extruder, IDEX and tool-changers + +Per-extruder vectors are **silently resized** to the nozzle count, with no error. Padding repeats the +**first** value, not the last — `["0.4","0.6"]` on a 4-nozzle machine becomes `0.4, 0.6, 0.4, 0.4`. +Longer vectors are truncated. + +Note the two sizing families: the plain per-extruder keys (`extruder_offset`, `extruder_colour`, +`extruder_printable_height`, `min_layer_height`, `max_layer_height`, `nozzle_diameter`) are sized to the +extruder count, while `printer_options_with_variant_1` (`retraction_length`, `z_hop`, `wipe`, +`nozzle_type`, the rest of the retraction family) is sized to `printer_extruder_variant` instead. + +- Give **one entry per extruder** for ordinary per-extruder vectors such as `extruder_offset`, + `extruder_colour`, `min_layer_height` and `max_layer_height`; size the variant-dependent family + to `printer_extruder_variant` instead. + A single `["0x0"]` `extruder_offset` on a dual or multi-tool machine — which already ships — pads every + toolhead to the same offset, so the offset never applies. +- Overriding `nozzle_diameter` to a different count without re-stating every per-extruder vector is the + other half of the trap — `Snapmaker U1 (0.4+0.6 nozzle)` inherits 5-entry vectors against 4 nozzles. + +Copy targets: `Custom/machine/fdm_toolchanger_common.json` + `Custom/machine/MyToolChanger 0.4 +nozzle.json` (a clean minimal variant on a base that gives every vector five entries), and +`Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json` for IDEX. The BBL extruder-variant machinery +(`extruder_variant_list`, `printer_extruder_id`, `default_nozzle_volume_type`) is used by a handful of +vendors — do not copy it into a new bundle (`nozzle_volume_type` itself is not a machine-preset key). + +## Custom G-code + +The keys are `machine_start_gcode`, `machine_end_gcode`, `change_filament_gcode`, +`machine_pause_gcode`, `before_layer_change_gcode` and `layer_change_gcode`. Both a single string with +embedded `\n` and a JSON array of lines are legal and both are in use — do not convert one into the +other. Conditionals are `{if …}` / `{elsif …}` / `{else}` / `{endif}`; `{elsif}` is rare but real (Qidi's +`layer_change_gcode` uses it). + +Placeholder errors only surface when the config is actually expanded, which means `validate_slice`: + +```bash +./scripts/check_profile.sh --vendor "" validate_slice +# Windows: scripts\check_profile.bat -Vendor "" validate_slice +``` + +What the sweep covers is in [validation.md](validation.md#validate_slice); no `CP TOOLCHANGE START` in +the output means `change_filament_gcode` never expanded. diff --git a/.claude/skills/orca-profiles/references/process-profiles.md b/.claude/skills/orca-profiles/references/process-profiles.md new file mode 100644 index 0000000000..98f31bac1a --- /dev/null +++ b/.claude/skills/orca-profiles/references/process-profiles.md @@ -0,0 +1,145 @@ +# Process profiles + +Processes live in `resources/profiles//process/` — selectable leaves and shared bases alike, and +every one of them is registered in `process_list`. There are no global processes shared across vendors. + +## Naming + +`"mm @"` — near-universal, so match it. + +Follow the bundle's existing quality vocabulary. BBL's common ladder relates the quality word to +the layer-height / nozzle ratio; it is a naming convention, not a loader constraint: + +| Quality | Ratio | 0.2 nozzle | 0.4 | 0.6 | 0.8 | +| --- | --- | --- | --- | --- | --- | +| Extra Fine | 0.2× | — | 0.08 | — | — | +| Fine | 0.3× | 0.06 | 0.12 | 0.18 | 0.24 | +| Optimal | 0.4× | 0.08 | 0.16 | 0.24 | 0.32 | +| Standard | 0.5× | 0.10 | 0.20 | 0.30 | 0.40 | +| Draft | 0.6× | 0.12 | 0.24 | 0.36 | 0.48 | +| Extra Draft | 0.7× | 0.14 | 0.28 | 0.42 | 0.56 | + +This is the `fdm_process_single__nozzle_` ladder; 0.4 is commonly the unsuffixed nozzle default. +Match neighbouring names rather than renaming shipped tiers to fit the table. + +The `@target` is a human label, not a reference: most do not equal any real printer variant name. +Compatibility comes from the resolved list or condition, not this label. + +## Shape + +A selectable leaf's only truly universal keys are `type`, `setting_id`, `name` and `instantiation`; +`inherits` and `from` are near-universal — plus compatibility. No slicing key is universal; even +`layer_height` is more often inherited than restated. A base has `type`, `name`, `instantiation`, almost +always `from`, and **no** `setting_id`. + +**Target shape: a 7-key leaf.** `OrcaArena` is the cleanest model — +`fdm_process_common` → `fdm_process_arena_common` → `fdm_process_arena__nozzle_` → leaf, where the +leaf carries only `type`, `name`, `inherits`, `from`, `setting_id`, `instantiation`, +`compatible_printers`, and the per-nozzle base holds the layer height and all eight line widths. + +BBL, WonderMaker and Z-Bolt are uniform in *layering* — every leaf inherits a base, names its printers +directly and holds no layer height of its own — but not in key count. Imitate BBL's layering, not its +content: its leaves carry doubled `print_extruder_variant` arrays that no single-variant vendor needs. + +Nearly every vendor ships its own `fdm_process_common` as the inherits-less root. Those files are not +identical; copying another vendor's version into a new bundle is normal. + +Beware leaf-inherits-leaf: Prusa chains several levels deep through sibling leaves, and Elegoo and +Flashforge do it too, so editing one selectable process silently changes others. Check a leaf's children +before editing it. + +## Compatibility + +Most leaves set `compatible_printers` directly; some inherit it from a base, and Prusa's fall through to +`compatible_printers_condition`. After resolving `inherits`, **every selectable process has one or the +other** — that is the invariant to review against. Unlike filaments, inheriting `compatible_printers` is +legitimate for a process, and no check enforces its presence. + +- A non-empty `compatible_printers` makes `compatible_printers_condition` **dead code**. Use one or + the other. +- A condition that fails to parse means *compatible with everything* — a warning, not an error. A typo + widens compatibility instead of narrowing it. +- Matching is `boost::regex` **`regex_match`** — a full-string match, which is why every shipped + condition wraps its keyword in `.*`. Because it is boost rather than `std`, `.` also spans the newlines + inside `printer_notes`. +- A `printer_notes` keyword that prefixes another model's keyword matches both. Prusa guards it: + + ``` + printer_notes=~/.*PRINTER_MODEL_COREONE[^_a-zA-Z0-9].*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/ + ``` + + The `[^_a-zA-Z0-9]` exists because `PRINTER_MODEL_COREONE_L` also contains `PRINTER_MODEL_COREONE`. + +`compatible_printers` is almost always one element. A leaf listing a whole model family is where a newly +added printer is usually forgotten. + +## What to review per nozzle + +| Key group | Review | +| --- | --- | +| `line_width` and per-region widths | resolved widths suit the nozzle and layer height | +| `layer_height`, `initial_layer_print_height` | within the printer's limits | +| print speeds | consistent with flow limits and hardware tuning | +| shell layers, wall loops, accelerations, support Z distances | preserve the intended thickness, motion and support behavior | + +**A common starting pattern is nozzle + 0.02 mm**: 0.22 / 0.42 / 0.62 / 0.82 / 1.02. In that pattern, at 0.4, +`inner_wall_line_width`, `sparse_infill_line_width`, `skin_infill_line_width` and +`skeleton_infill_line_width` widen to 0.45 and `initial_layer_line_width` to 0.5; at 0.2, +`initial_layer_line_width` widens to 0.25. Also derived, and easily missed: +`ironing_inset = line_width / 2` (0.11 / 0.21 / 0.31 / 0.41). +These are examples, not required values; preserve intentional vendor tuning and percentage/automatic +widths, and validate their resolved values. + +`min_layer_height` and `max_layer_height` are machine keys — no process file sets them. + +## Slice-time content checks + +`Print::validate()` enforces four rules at slice time: + +1. `initial_layer_print_height` ≤ min `nozzle_diameter` +2. `layer_height` ≤ min `nozzle_diameter` — *"Layer height cannot exceed nozzle diameter."* +3. `line_width` and the seven per-region widths (inner/outer wall, sparse infill, internal solid infill, + top surface, skin, skeleton) > `layer_height` — *"Line width too small"*. `support_line_width` only + when the object has support or a raft; `initial_layer_line_width` is never checked. +4. every width ≤ 5 × max `nozzle_diameter` — *"Line width too large"* + +Two further rules cover `bridge_line_width` (≤ nozzle diameter; > `layer_height` unless `thick_bridges` +and `thick_internal_bridges` are both on). The sweep starts from printer defaults rather than +enumerating every process. **A new non-default process gets no dedicated slice coverage in CI.** + +## What CI checks on a process + +Structure, not content: `process_list` name consistency **and** index coverage the other way, two files +claiming one process name, the `extruder_clearance_radius` / `extruder_clearance_max_radius` conflict +pair, duplicate JSON keys, a file `normalize` would rewrite, and the five `setting_id` rules (the fifth +rejects the misspelled key `settings_id`). `compatible_printers` presence is checked for **filaments +only**. + +Note the C++ loader derives a missing `setting_id` on the fly, so the validator will not fail a process +without one — only `orca_profile_tool.py check` catches it. Running the validator alone gives a false +all-clear. + +## Silent failures specific to processes + +- **Unknown or misspelled keys are discarded with no error and no warning.** They ship all over the + process tree, both plain typos (`inital_layer_height`, `tree_support_bramch_diameter_angle`, + `sparse_infill_patter`) and keys copied from other slicers that Orca never defined. +- Keys on the tool's `OBSOLETE_KEYS` list (`adaptive_layer_height`, `overhang_totally_speed`, …) are + rejected by `check`'s normalization pass across preset types; `normalize` removes them. + The additional per-key obsolete warnings read `filament/` only. +- A dangling `compatible_printers` inside an `instantiation: "false"` base is invisible to + `check_preset_references`: a base never becomes a `Preset` at all (its config goes into `config_maps` + and the loader returns early), so it is in no collection for the check to walk. +- Orphan bases that nothing inherits are scattered through the tree — usually the leftover of a + half-finished nozzle addition. + +## Adding a quality tier or a nozzle's processes + +1. Choose the layer height and quality label using the vendor's existing ladder. +2. If the vendor has per-nozzle bases, add one (`fdm_process___nozzle_`) with the layer + height, nozzle-appropriate line widths, `initial_layer_print_height` and `ironing_inset`. +3. Add the leaf: 7 keys, `compatible_printers` naming the exact printer variant(s). +4. Register both in `process_list`, parent first. Bump the version, run the id tool, validate. +5. Slice this process explicitly with its intended printer; the sweep gives non-default tiers no + dedicated coverage. If it is a printer's `default_print_profile`, verify the exact name and + resolved compatibility too — the sweep may fall back or select another compatible process. diff --git a/.claude/skills/orca-profiles/references/review-checklist.md b/.claude/skills/orca-profiles/references/review-checklist.md new file mode 100644 index 0000000000..26f2f7656f --- /dev/null +++ b/.claude/skills/orca-profiles/references/review-checklist.md @@ -0,0 +1,177 @@ +# Reviewing a profile change + +Start with delivery, identity and backward compatibility, then check the affected preset types. +The table highlights gaps that need human review. What CI *does* run: +[validation.md](validation.md). + +| Not checked by CI | Consequence | +| --- | --- | +| The `version` bump | The change never reaches an upgrading user | +| A misspelled setting key | Setting silently has no effect | +| A filename Windows cannot check out, or one that differs from its `sub_path` only in case | Works on the author's machine, breaks the bundle on another platform | +| `bed_model` / `bed_texture` / `hotend_model` pointing at a missing asset | Bed renders as Custom, hotend falls back to the generic model | +| A nozzle size in a model's list with no matching variant | The size is offered and resolves to nothing | +| A non-default process | `validate_slice` gives non-default quality tiers no dedicated coverage | +| Whether the intended default survived compatibility selection | The sweep can select a different compatible preset | +| A dangling `compatible_printers` inside an `instantiation: "false"` base | A base never becomes a `Preset`, so the reference check never sees it (a bad `inherits` in a base *is* caught) | +| A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name | +| Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated | + +## 1. Was the vendor `version` bumped? + +For **every** bundle whose folder the diff touches, `resources/profiles/.json` must have its +`version` incremented — last component, carrying `.99` into the third component. A library change +means bumping `OrcaFilamentLibrary.json`. + +*Why:* nothing in CI checks it, and `PresetUpdater` reinstalls only when `vendor_ver < resource_ver` — +without a bump the change reaches neither an upgrading user nor the author's own running app. + +## 2. Was the index rebuilt, and does the diff contain only this change? + +`check` now fails on an unregistered file, on an index `update-index` would reorder, and on a file +`normalize` would rewrite — so a PR that skipped them arrives red, and you do not have to spot the +omission yourself. Three things are still yours: + +- **The index diff belongs to this change.** `update-index` rewrites whole `*_list` sections. If the + bundle had drifted, the author's PR now carries someone else's reordering; ask for it in a separate + commit rather than reviewing it inline. +- **A deleted selectable preset needs a successor** as in item 4. `update-index` removes its + registration; `validate_custom` detects the break only for names covered by released fixtures. +- **`normalize` edits content, not just layout.** It drops `version` and `is_custom_defined` from preset + files, removes obsolete keys, deletes six print-speed keys from filament profiles, and resolves + `extruder_clearance_radius` against `extruder_clearance_max_radius` by keeping the larger. + Check that the keys it removed were meant to go. + +Obsolete keys fail `check`'s normalization pass and should be removed with `normalize`. +`check` also reports per-key obsolete warnings for filament profiles in the selected vendors. + +*Why:* the index is the loader's only entry point. Out-of-order entries fail with `can not find inherits` +and take the whole vendor bundle down; an unindexed file gets reviewed, merged and never loads. + +## 3. Are ids generated, not written? + +No hand-typed or copied `setting_id` / `filament_id`. Instantiated presets have a `setting_id`; bases do +not. A filament id change comes with a `scripts/filament_id_snapshot.json` diff in the same commit. +`check` enforces all of that; what it cannot tell you is whether the identity *should* have moved. + +Read the snapshot diff as the identity gate: a removed id or a changed triple means a product's identity +moved, and the old id is not forwarded anywhere. Confirm that was intended. + +*Why:* a duplicate `filament_id` on one printer makes AMS spool matching a coin toss; a copied +`setting_id` breaks preset identity. See [ids.md](ids.md). + +## 4. Does anything disappear for existing users? + +A rename, a deletion, or a flip of `"instantiation": "true"` → `"false"` on a shipped preset removes the +name from the preset collection. It needs `renamed_from` on a successor — and only one preset may claim a +given old name. The claimed old name must **not** still be a live preset; the redirect is inert if it is. + +*Why:* user presets inheriting it die with `can not find parent for config !`; 3MF-embedded +presets are dropped with no error at all. Commit `33923464ae` reverted exactly this for Cubicon; +`6943b6ddc3` redid it correctly. CI's `validate_custom` catches the shipped-name case — but not an inert +`renamed_from`. + +## 5. Is `compatible_printers` right? + +Exact printer **variant** names, non-empty on every instantiated filament outside OrcaFilamentLibrary +and written in the preset's own file — golden rule 6, with the flattened-vs-own-key trap in +[filament-profiles.md](filament-profiles.md#compatible_printers). Watch for a nozzle-specific variant that +inherited or copied the base's full printer list, and for two presets of one product with overlapping +lists — duplicate combobox entries and an ambiguous AMS match. + +*Why:* real shipped bugs twice (`b7b3418baf` "showing up everywhere", `ff83aa41ef` duplicate Flashforge +entries). + +## 6. Model ↔ variant ↔ process consistency + +- New nozzle size → the model's `nozzle_diameter` list extended, a variant with a matching + `printer_variant`, and at least one process listing that variant. +- `default_print_profile` is one exact name (not a `;` list), and that process's resolved + compatibility list or condition includes this printer. +- `default_filament_profile` is an array of names that exist. + +*Why:* an unlisted `printer_variant` is a hard bundle-load failure. Default process selection is +weaker: the sweep attempts the named default, then updates compatibility and rejects generic Default +fallbacks. Another compatible process can conceal a bad reference, so inspect it even after a pass. + +## 7. Types and spellings + +Every value a string or an array of strings; `filament_type` an array; `instantiation` the string +`"true"`/`"false"` — golden rule 7. Check index metadata and model `nozzle_diameter` especially; +wrong types there can abort loading for **every** vendor. + +The part only a reviewer can do: check new setting keys against `src/libslic3r/PrintConfig.cpp`. A +misspelled key is silently discarded (rule 8), the single most common way a profile edit does nothing +while CI stays green. + +## 8. Blast radius of a base edit + +A change to `fdm_*_common.json` reaches every child at once. Ask which presets it touches — several +reverts in this repo are exactly this (`41d1b0d3c8`, `dc491166a8`). Also check whether the edited leaf has +children of its own: Prusa, Flashforge and Elegoo all chain leaf-inherits-leaf several levels deep. + +## 9. Do the numbers make sense for the nozzle? + +Check resolved widths and layer heights against the nozzle, and flow limits / pressure advance +against the actual hardware and material. The patterns in [process-profiles.md](process-profiles.md) +are examples, not mandatory values; [filament-profiles.md](filament-profiles.md) explains what to +revisit for a nozzle change. A cloned preset's unchanged MVS needs particular scrutiny. + +Settings tuned for real hardware cannot be verified by reading the diff. Say so rather than approving +numbers nobody measured. + +## 10. Asset references (not checked anywhere) + +`bed_model`, `bed_texture`, `hotend_model` and `_cover.png` exist under +`resources/profiles//`. Broken references already ship; nothing checks them. + +## 11. `default_materials` (checked by CI) + +`check` fails on a `default_materials` / `default_filament_profile` name that resolves to no system +filament, so a dangling entry no longer reaches review. Scope the run while working on one vendor: + +```bash +python3 scripts/orca_profile_tool.py check --vendor "" # py -3 on Windows +``` + +## 12. Per-extruder vector lengths (not checked) + +One entry per extruder for the plain per-extruder vectors; the `printer_options_with_variant_1` keys are +sized to `printer_extruder_variant` instead. A wrong length is silently padded — repeating the **first** +value, not the last — or truncated. The two sizing families and the worked cases are in +[machine-profiles.md](machine-profiles.md#multi-extruder-idex-and-tool-changers). + +## 13. Non-default processes get no slice coverage + +`validate_slice` starts from printer defaults; it does not enumerate every process. Slice a new or +changed non-default tier explicitly with its intended printer. + +## 14. Housekeeping worth a nit, not a block + +`"from"` other than `"system"` (the preset-bundle loader ignores it, though the CLI's config-file loader +rejects anything but `system`/`user`/`User`), `printer_settings_id` copied from another +vendor, and a filename that disagrees with the preset's `name` (common; the loader keys off `name`). + +## 15. Cross-platform filenames and paths (not checked) + +Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots, +and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths). + +--- + +## Reporting the review + +A finding is: **one defect**, its file, what breaks at runtime or in CI, and the fix. Split independent +defects into separate findings even when they live in one file — five id problems in one bullet get one +fix and four survivors. + +Severity discriminates only if it is earned: + +| Severity | Means | +| --- | --- | +| blocker | the bundle fails to load, or a preset is unreachable at runtime | +| major | CI fails, or existing users lose a preset | +| minor | wrong-but-working: dead keys, `from`, naming, redundant overrides | + +Compute every number and id (`orca_profile_tool.py`, a scripted count) or omit it — one invented count +makes a reader stop trusting the right ones. Report a command's result only if you ran it. diff --git a/.claude/skills/orca-profiles/references/validation.md b/.claude/skills/orca-profiles/references/validation.md new file mode 100644 index 0000000000..a0537c09ef --- /dev/null +++ b/.claude/skills/orca-profiles/references/validation.md @@ -0,0 +1,264 @@ +# Validating profiles + +```bash +./scripts/check_profile.sh # everything CI runs +./scripts/check_profile.sh --vendor "" # fast loop +./scripts/check_profile.sh profile_tool validate_slice # named checks only +``` + +```bat +scripts\check_profile.bat :: the same three, on Windows +scripts\check_profile.bat -Vendor "" +scripts\check_profile.bat profile_tool validate_slice +``` + +`check_profile.bat` is a shim around `check_profile.ps1` — same checks, same order, same logs; +the flags take PowerShell spellings (`-Vendor`, `-ProfilesDir`, `-Validator`, `-Download`, `-Refresh`, +`-WorkDir`, `-LogLevel`) and positional check names are unchanged. `-p`, `-v` and `-l` are aliases, so +`-v Elegoo -l 2` reads the same on both platforms. It passes `-ExecutionPolicy Bypass` because a +default Windows client refuses to run a checked-out `.ps1` at all. The `.ps1` finds Python itself, +probing `py -3`, then `python`, then `python3`; run the tool by hand with `py -3` for the same reason. + +Every check in the run happens even after an earlier one fails; the script exits non-zero if any did, and writes +`.test/check_profiles/logs/.log` plus, on failure, `.test/check_profiles/pr_comment.md` — the same +report CI posts on the PR. A stale `.test/check_profiles/.lock` after a crash must be removed by hand. + +## The five checks + +| Check | Command it runs | Catches | +| --- | --- | --- | +| `profile_tool` | `python3 scripts/orca_profile_tool.py check` | index coverage **both ways**, preset-name collisions, files `normalize`/`update-index` would still rewrite, duplicate JSON keys, filament `compatible_printers`, `filament_type` array, conflict keys, id length, **all `setting_id` and `filament_id` rules** | +| `validate_system` | `validator -p resources/profiles -l 2` | load errors, missing filament `compatible_printers`, dangling `inherits`/`compatible_*`, duplicate `filament_id` per printer | +| `validate_slice` | `validator -p … -s -l 2` | custom G-code expansion, unresolvable printer defaults | +| `validate_filament_subtypes` | `validator -p … -l 2 -f` | nothing extra — see below | +| `validate_custom` | `validator -p -l 2` | a shipped preset name that a past release offered no longer resolving | + +**`-f` is a no-op.** It is declared `po::bool_switch()->default_value(true)`, so the duplicate-`filament_id` +check runs whether or not you pass it — `validate_system` already fails on duplicates. The binary's own +`--help` ("Off unless this flag is present") does not reflect that default. + +### `validate_custom` — the backward-compatibility gate + +Downloads one fixture archive per past release (v1.9.0 onwards) of *generated mock* user presets — +a `__orca_test` copy of every system preset that +release shipped, cut with the validator's own `-g 1` mode — unpacks each over a copy of the current tree +and loads it. Each entry holds only `inherits` plus a canned diff, so the one failure it adds over +`validate_system` is a shipped preset name disappearing. (The whole current tree sits under each fixture, +so every `validate_system` error fails it too.) This is what makes a rename or an +`instantiation` flip a CI failure rather than just a user complaint, and the reason `renamed_from` is +mandatory. + +### `validate_slice` + +Slices a two-colour cube on every instantiable printer in the tree, sequentially, forcing the prime tower. +It selects `default_print_profile` and the first `default_filament_profile`, then updates compatibility; +that update can select a different compatible preset. Confirm the intended defaults yourself rather +than treating a passing sweep as proof that those exact presets were sliced. +A printer fails if it cannot be selected, falls back to a Default preset, throws, produces no g-code, or +emits no `CP TOOLCHANGE START`. It cannot be scoped to a filament-only vendor +(`No instantiable printer presets found for vendor OrcaFilamentLibrary`); `check_profile.sh` records it +as SKIP for a vendor with no `machine/` folder. + +## `orca_profile_tool.py check` + +`check` is one subcommand of the tool that also owns +`generate-id`, `normalize`, `trim`, `update-index` and `update-snapshot`; see [ids.md](ids.md) for the +writing half. + +| Per vendor | Catches | +| --- | --- | +| `check_preset_name_uniqueness` | two files in one bundle claiming one type + name — indexed or not | +| `check_index_coverage` | a file on disk that no `*_list` references (**an error, not a warning**) | +| `check_name_consistency` | an index entry whose `name` disagrees with the file, or whose `sub_path` is missing | +| `check_normalized` | a file `normalize` would rewrite, and an index `update-index` would rebuild | +| `check_filament_compatible_printers` | an instantiated non-library filament with no `compatible_printers` of its own | +| `check_conflict_keys` | `extruder_clearance_radius` alongside `extruder_clearance_max_radius` | +| `check_vector_type_keys` | a vector option written as a scalar (`"filament_type": "PLA"`) | +| `check_filament_id_length` | a declared `filament_id` longer than 8 characters | +| `check_machine_default_materials` | every `default_materials` / `default_filament_profile` name resolves | +| `check_obsolete_keys` | per-key warnings for ignored options; **filament files only** | + +Tree-wide, **ignoring `--vendor` entirely**: `check_setting_id_uniqueness` and `check_filament_ids`. So a +vendor-scoped run can and does fail on another vendor's files — and it saves seconds, not minutes. + +Unscoped, the per-vendor pass covers every bundle. The only exclusion is the stray `user/` directory +(see below); `OrcaFilamentLibrary` is held to the same rules as any vendor, its sole exemption being +that a library filament may leave `compatible_printers` empty — exactly what +`check_filament_compatible_printers` allows. `check_normalized` covers every bundle with an index. + +Notes that matter: + +- Exit codes: **0** clean, **1** errors found, **2** argparse misuse. Warnings never change the exit code. +- A nonexistent `--vendor` is a hard error — `[ERROR] unknown vendor "" in `, exit 1. +- `--vendor ""` means all vendors; `check_profile.sh` relies on that. `--vendor` is repeatable. +- A **stray directory** under `resources/profiles/` still gets counted as a vendor by the per-vendor pass + and warned about (`No profiles found for vendor: at …/.json`, and the "Checked vendors" count + goes up by one). The one exception is `user/`, the validator's data dir, which an unscoped `check` + skips by name; `--vendor user` still checks and warns about it. Warnings never change the exit code. + `normalize`, `trim` and `update-index` ignore strays too — they define a bundle as *a directory with a + matching index file*. +- Each remedy is printed once for the whole run, not once per file, as a `[WARNING]` under the errors + ("2 unreferenced file(s) above: delete them, or run … update-index"). Read those lines: they name the + command that fixes the batch. +- The trailing summary always suggests `normalize`. That is right for the shape errors and misleading for + everything else — an id error needs `generate-id`, a dangling `default_materials` needs a human. +- `resources/profiles/check_unused_setting_id.py` is a legacy BBL-only diagnostic, not part of + profile CI. Use `orca_profile_tool.py check` for current id validation. + +### Obsolete-key diagnostics + +`check` always reports per-key warnings for obsolete options in filament profiles. +The normalization check also rejects obsolete keys across preset types; `normalize` removes them. + +### Default-material references + +The materials check finds `default_materials` / `default_filament_profile` entries naming a preset +that does not exist. The three authoring errors it surfaces are `,` instead of `;`, wrong case +(`@system`), and a whole `;`-joined string stuffed into one array element. + +### `normalize` and `update-index` are part of the check + +`check` fails when either command would still change something, so they are not optional polish — the +file that gets reviewed has to be the file that ships. What `normalize` changes is narrow and fixed: +adds a missing `type`, deletes a `version` or `is_custom_defined` key from a *preset* file, deletes six +print-speed keys from filament profiles (`initial_layer_print_speed`, `outer_wall_speed`, +`inner_wall_speed`, `infill_speed`, `top_surface_speed`, `travel_speed`), deletes the +obsolete keys in `PrintConfigDef::handle_legacy`'s `ignore` set across preset types, resolves the +`extruder_clearance_*` conflict pair by keeping the larger, arrayifies five filament options besides +`filament_type`, and hoists `type`, `name`, `renamed_from`, `inherits`, `from`, `setting_id`, +`filament_id`, `instantiation` to the front. A file it changes is then rewritten whole — tab-indented, +LF, one trailing newline, keys reordered. + +**Set `type` explicitly when authoring.** For a file in `machine/` without it, normalization guesses +`machine` only if its name contains `nozzle`, otherwise `machine_model`. That heuristic cannot +reliably classify shared machine bases or unusually named variants. + +The Python obsolete-key set is checked against the C++ source by a unit test. Active options +and legacy aliases that the loader migrates (such as `extruder_type` and +`extruder_clearance_max_radius`) are preserved. + +Two things it therefore does **not** enforce: + +- **Formatting and key order on their own.** A file with none of those problems is skipped entirely, so + 4-space indent, a missing trailing newline, and a file that leads with `compatible_printers` all pass + `check`. They stay latent until something else trips `normalize` and the whole file reformats inside an + unrelated diff. (`normalize --force` rewrites every file, which is not something to run on a shipped + bundle.) +- **A misspelled setting key.** `inital_layer_height` and `sparse_infill_densiti` pass `check` cleanly. + Verify new keys against `PrintConfig.cpp` and `PrintConfigDef::handle_legacy`. + +## The validator binary + +Built from `src/dev-utils/OrcaSlicer_profile_validator.cpp` (`-DORCA_TOOLS=ON`). +Both scripts find a local build under `build*/` — `check_profile.sh` tries Release, RelWithDebInfo, then +Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into +`.test/check_profiles/validator`. Pass `--download` / `-Download` to match CI exactly, since a stale +local build is used silently. Windows looks for `OrcaSlicer_profile_validator.exe`. + +If your build lives somewhere else entirely, point at it with `--validator` / `-Validator`, or set +`ORCA_PROFILE_VALIDATOR` (`$env:ORCA_PROFILE_VALIDATOR` in PowerShell). + +| Flag | Meaning | +| --- | --- | +| `-p ` | profile tree (also becomes the data dir) | +| `-l ` | log level; CI uses 2 | +| `-v ` | load only that vendor **plus** OrcaFilamentLibrary | +| `-s` | slice sweep | +| `-f` | no-op (see above) | +| `-g 1` | regenerate user-preset fixtures; takes a value, and wipes the user preset dir first | + +On ARM64 Linux the nightly is x86-64 only — the script warns and downloads anyway, producing a binary +that will not run. Build it locally instead. + +Running the validator directly uses the profile tree as its data directory and can create `user/` +there. Prefer the wrappers, which stash existing user presets and restore them afterward. After a +direct run, inspect `user/` and remove only empty directories created by that run; fixtures or +pre-existing user files may be present. + +## Checking a copy of the tree + +Use `--profiles DIR` on the Python tool and `-p DIR` on the validator. +`check` and `update-snapshot` describe a tree's sanctioned id state, so pointing them elsewhere also +needs `--snapshot PATH` for that tree — passing `--profiles` without it exits 2 rather than silently +judging the copy against `resources/profiles`'s snapshot. + +**The wrappers' `--profiles` / `-ProfilesDir` redirects only their validator checks.** Their +`profile_tool` check still reads this checkout's `resources/profiles`. To validate a copy fully, +run the Python check separately with that tree's snapshot, then name only validator checks: + +```bash +python3 scripts/orca_profile_tool.py check --profiles "" --snapshot "" +./scripts/check_profile.sh --profiles "" validate_system validate_slice validate_filament_subtypes validate_custom +``` + +On Windows use `py -3` and `scripts\check_profile.bat -ProfilesDir ""` with the same check names. + +## Testing in the app + +Editing this checkout's `resources/profiles` does not update a separately installed application. +Test with a build using the edited resources and a bumped bundle version; the updater installs newer +bundles under `/system/`, and the preset cache also depends on the bundle version. +Use Help ▸ Show Configuration Folder to locate the active data directory: + +| Platform | Default data directory | +| --- | --- | +| macOS | `~/Library/Application Support/OrcaSlicer` | +| Linux | `$XDG_CONFIG_HOME/OrcaSlicer`, or `~/.config/OrcaSlicer` when unset | +| Windows | `%APPDATA%\OrcaSlicer` | + +A portable `data_dir` next to the executable takes precedence. Use a separate test configuration +for a clean-install check; preserve the normal configuration and user presets. + +## Cross-platform paths + +Match the exact case of each `sub_path` and asset filename; Linux filesystems commonly distinguish +case even when a macOS or Windows checkout does not. Preset-name references are case-sensitive +on every platform. Avoid Windows-invalid characters (`< > : " | ? *`), reserved device names +such as `CON` / `NUL` (including with extensions), and trailing spaces or dots in path components. +Keep stems tidy too, but a space immediately before `.json` is not a trailing path-component space. + +## Error → remedy + +| Message | Fix | +| --- | --- | +| `can not find inherits for ` | parent missing, unregistered, or listed **after** the child | +| `can not find filament_id for ` | nothing in the chain declares one — run `generate-id` | +| `can not find parent for config !` | a shipped name disappeared — add `renamed_from` | +| `Missing instantiation attribute for ` | key absent **or** not the string `"true"`/`"false"` | +| `contains incorrect keys: , which were removed` | a key valid for a different preset type | +| `defines invalid printer variant ""` | not in the model's `nozzle_diameter` list | +| `has printer_variant "" that does not match its nozzle_diameter` | the set comparison in [machine-profiles.md](machine-profiles.md) | +| `references unknown compatible_printers "

"` | the printer was renamed or deleted; fix the reference | +| `references renamed compatible_printers "" (now "")` | in-tree references must name the current preset; `renamed_from` does not excuse them | +| `Filament preset "" is missing compatible_printers setting` | non-library filaments need a non-empty list in their **own** file — the flattened-vs-own-key trap is in [filament-profiles.md](filament-profiles.md#compatible_printers) | +| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint, or fix an `inherits` pointing at another material's `@base` | +| `Layer height cannot exceed nozzle diameter.` / `Line width too small` | `Print::validate()` flow rules | +| `[ERROR] … no .json list references it, so it never loads` | `update-index`, or delete the file | +| `[ERROR] … references it and it declares no profile type` | set the correct `type` explicitly, then `normalize` and `update-index` | +| `[ERROR] … normalize would ` / `.json: update-index would rebuild ` | run that command and commit the result | +| `[ERROR] has N profiles named ""` | identify the intended preset and remove or rename the duplicate; use `trim --dry-run` only for deliberate unindexed-file cleanup | +| `[ERROR] … must not have a setting_id` / `is missing a setting_id` | `generate-id --setting-id` | +| `[ERROR] filament_id "" is not sanctioned by …snapshot.json` | `update-snapshot`, commit the diff | +| `inherits filament_id "X" but its own triple … mints "Y"` | `generate-id` will **not** fix this — see [ids.md](ids.md) | +| `vendor 's config version: invalid` | the `version` string is not Semver-parseable | +| `[json.exception.type_error.302] type must be string` | locate the non-string value in the index or model; see [failure scopes](vendor-bundle.md#failure-modes-ranked-by-blast-radius) | +| `Printer "

" fell back to a default preset` | final process or filament selection is a generic Default preset; check named defaults, visibility and available compatible presets. An incompatible default may instead be replaced without this error | +| `Printer "

" sliced but the filament change never fired` | `change_filament_gcode` never expanded | + +## CI + +`.github/workflows/check_profiles.yml`, job **"Check profiles"**, on `pull_request` into `main` or +`release/*`, paths `resources/profiles/**`, `resources/printers/**`, `scripts/**` and the workflow itself. +There is no push trigger — a direct push to main runs no profile validation. + +The job opens with `python3 -m unittest discover -s scripts/tests -t scripts`, the tool's own unit +tests. That step is deliberately **not** `continue-on-error`: a broken tool makes everything it then says +about the profiles worthless. Every check after it is `continue-on-error` with a final gate, so one run +reports all five results. On failure a second workflow posts or replaces a single PR comment marked +``, with each failing log truncated to 30 KB; it deletes the comment +once the run is green. + +The job name is also the required check for the delegated-merge bot, which lets a vendor maintainer +self-merge a `resources/profiles//` PR with no human review — so whatever CI does not check +is what ships unreviewed. Its denied patterns refuse `^scripts/` and any `.py`, so a PR that must update +`scripts/filament_id_snapshot.json` always needs a maintainer. diff --git a/.claude/skills/orca-profiles/references/vendor-bundle.md b/.claude/skills/orca-profiles/references/vendor-bundle.md new file mode 100644 index 0000000000..53b345b623 --- /dev/null +++ b/.claude/skills/orca-profiles/references/vendor-bundle.md @@ -0,0 +1,175 @@ +# The vendor bundle and the loader + +A bundle is `resources/profiles/.json` (the index) plus `resources/profiles//`. +The **vendor id is the filename stem**, not the `name` inside — several differ (`BBL.json` is named +"Bambulab"). Asset paths and the `setting_id` formula use the id; the `validate_custom` fixture prefix +uses the `name`. + +## The index + +```json +{ + "name": "Phrozen", + "version": "02.04.00.03", + "force_update": "0", + "description": "Phrozen configurations", + "machine_model_list": [ { "name": "...", "sub_path": "machine/....json" } ], + "machine_list": [ ... ], + "process_list": [ ... ], + "filament_list": [ ... ] +} +``` + +The loader reads `name`, `version`, `url` and the four `*_list` arrays. +`description` is only logged. `force_update` is read by `PresetUpdater`, never by the loader. +`sub_path` is relative to the **vendor folder**. + +| List | Holds | +| --- | --- | +| `machine_model_list` | `machine_model` records (the printer product) | +| `machine_list` | printer variants **and** shared machine bases | +| `process_list` | selectable processes **and** shared process bases | +| `filament_list` | selectable filaments **and** shared filament bases | + +### Three registration rules + +1. **Everything is registered, bases included.** Every preset file on disk has exactly one entry in the + matching list, and no unindexed preset file is left in the tree. +2. **Parents before children.** `inherits` resolves against a per-kind map filled as the list is walked + (`configs.clear()` then process, filaments, printers). A parent listed after its child produces + `can not find inherits for ` and the bundle is discarded. +3. **The index entry's `name` must equal the `name` inside the sub_path file.** `check_name_consistency` + walks the index looking for the files; `check_index_coverage` walks the files looking for them in the + index. The `renamed_from` escape hatch `check_name_consistency`'s docstring promises is commented out. + +All three are `check` errors now, and `update-index` writes an index that satisfies all three from the +files on disk — including the parents-first ordering, by topological sort. Hand-editing the index is +fine for a one-line addition, but the committed result must equal what `update-index` writes, because +`check` compares them. + +The loader itself reports none of this: an unregistered file, or an entry with a typo'd key +(`"subpath"`), is silently dropped. (A typo'd `sub_path` is a `check` error naming the entry.) + +`BBL/cli_config.json` and `BBL/filament/filaments_color_codes.json` are auxiliary data loaded by path, +not presets. The tool's `NON_PROFILE_FILES` excludes these basenames from preset maintenance. + +## `version` + +Parsed by a four-component Semver where the 4th is folded in as `patch = patch*100 + value`. Write it +zero-padded, `MM.mm.pp.bb`; a couple of bundles drop a component or the padding, but do not imitate them. + +- **Bump the version for every bundle the PR touches.** `PresetUpdater` installs bundled resources + only when their version is newer than the installed version; the `.opc` preset cache is also + versioned. Nothing in profile CI checks the bump. +- **Keep the last component ≤ 99.** `02.04.00.100` and `02.04.01.00` both parse to `2.4.100`. A bundle + that reaches `.99` carries into the third component (`02.03.02.99` → `02.03.03.00`). +- An **absent** version is worse than a stale one: the validator still passes, but `Semver::valid()` + excludes `0.0.0`, so the vendor is dropped from the configuration wizard entirely and the preset cache + is disabled for it. An *unparseable* version is not silent — it throws and discards the whole bundle + (see the failure table below). + +## Common preset keys + +| Key | Value | +| --- | --- | +| `type` | `machine_model` / `machine` / `process` / `filament` | +| `name` | the preset name; the filename is *not* authoritative | +| `inherits` | the parent's exact `name` — no path, no `.json` | +| `instantiation` | the **string** `"true"` (selectable) or `"false"` (base) | +| `from` | `"system"` by convention; the vendor loader never reads it | +| `setting_id` | required on instantiated presets, forbidden on bases — generated | +| `renamed_from` | `;`-separated list of old names this preset supersedes | + +These are config-preset keys; `machine_model` records have their own +[schema](machine-profiles.md#a-machine_model-is-not-a-config-preset). Keep `from` as `"system"` +for shipped presets. The vendor loader ignores it, but the CLI config-file loader accepts only +`system`, `user` or `User` and handles their inheritance differently. + +`instantiation` is the one metadata key that is hard-gated: a missing key or any value other than the +strings `"true"`/`"false"` is an error (`Missing instantiation attribute for `). A JSON boolean +`true` fails harder — it throws inside `load_from_json` and takes the **whole vendor bundle** down. + +### `inherits` + +Resolution is an exact-name lookup **within the same bundle**, plus one exception: filaments may inherit +from `OrcaFilamentLibrary`, which is loaded first and becomes the base bundle. Vendor-to-vendor +inheritance always fails. You can inherit from an instantiated preset as well as from a base; it is +common. + +### `renamed_from` + +One JSON string, `;`-separated for several old names. + +- Write `"A;B"`, never `"A ; B"` — an unquoted item keeps its trailing space and can never match. +- When `renamed_from` is **absent** and the name contains `@`, the loader auto-adds the `@`-removed form + (`X @Y` → `X Y`) as a rename alias. Declaring an explicit `renamed_from` **suppresses** that, so a + preset that needs both the `@`-removed form and a real old name must list both. No shipped profile + currently does, which means any preset that gained a `renamed_from` quietly lost its `X Y` alias. +- It rescues names stored **outside** the tree: user presets and 3MF projects. It does **not** rescue + in-tree `inherits` (exact lookup), it does **not** satisfy `check_name_consistency`, the validator + reports an in-tree reference that only resolves through it (`references renamed compatible_printers + "OLD" (now "NEW")`), and `machine_model` records never read it at all. +- Only one preset may claim a given old name — two that do is a counted error + (`… was marked as renamed from "Y" … as well`). But the redirect is **inert while a live preset still + carries that name**, and nothing checks *that*; Z-Bolt ships a folder of such dead entries. + +## Failure modes, ranked by blast radius + +| Scope | Cause | +| --- | --- | +| **All vendors, zero system profiles** | a non-string `version`, `name` or `url` at the top level of a vendor index (`"version": 2`), or non-string `nozzle_diameter` on a model — `nlohmann::type_error` escapes the per-vendor `std::runtime_error` catch | +| **The whole vendor bundle** | unparseable `version`; index JSON parse error; a `sub_path` file missing or unparseable; unresolvable `inherits`; duplicate preset name within the vendor; empty/unknown `printer_model` or `printer_variant`; a filament resolving no `filament_id` | +| **One preset** | `instantiation` missing or a wrong string; keys belonging to another preset type (`contains incorrect keys: …, which were removed`); a non-string inside a `*_list` entry (`invalid value type for `) | +| **Logged, not counted** | a raw JSON number in a preset — `invalid json type for `, the value is dropped and the exit code stays 0 | +| **Nothing reported by the loader** | unregistered file; misspelled setting key; missing bed/hotend asset. Only the first of those is a `check` error; the other two reach users | + +Deleting a file the index still lists surfaces as a *parse error* on line 1, not "file not found" — the +loader `ifstream`s the missing path and nlohmann reports `unexpected end of input`. + +Preset names are a **single global namespace across every vendor**: a duplicate within one vendor is a +hard bundle failure, a duplicate across vendors is reported as `Found duplicated preset: in +vendor: ` and still counts as an error. `check_preset_name_uniqueness` catches the within-bundle +case earlier and more precisely — including an *unindexed* twin, which is one `sub_path` edit away from +silently becoming the parent every child resolves to (`std::map::emplace` keeps the first insertion, so +index order decides). Base names, by contrast, repeat across bundles by design: `fdm_process_common` +exists in nearly all of them. + +## Starting a whole new vendor bundle + +Nothing generates one; copy the smallest bundle that resembles the hardware. **`Voxelab` or `M3D`** are +the minimal shape — a shared machine base, the model, one variant, a shared process base, two +processes, and an empty `filament_list` that takes the library generics. Do *not* start from `Phrozen`: +it carries local `fdm_filament_*` copies that have drifted from the library, and a filament preset that +restates most of its parent — the style this skill advises against. + +Write the machine files **last**, so you only visit them once: + +1. **Choose the names first** — model, variant(s), process(es). Everything else references them. +2. `resources/profiles/.json`: `name`, `version` (`01.00.00.00`), `force_update: "0"`, + `description`, and all four `*_list` arrays (an empty `filament_list` is fine). +3. The shared bases — `/machine/fdm_machine_common.json` and + `/process/fdm_process_common.json`, both `"instantiation": "false"` with no `setting_id`. + For a Klipper printer add your own `/machine/fdm_klipper_common.json` inheriting the machine + base; there is no shared one, because a `machine` preset can only inherit inside its own bundle. +4. One selectable process per variant, each naming its variant in `compatible_printers`. +5. Bed assets and `_cover.png`, all directly in `/`. None of them is needed for the + bundle to load, and nothing in CI checks them — but the bed files are inert unless the `machine_model` + names them in `bed_model` / `bed_texture`, and the cover is found by convention as + `_cover.png`. +6. The `machine_model` record and the `machine` variants, now that every value they reference exists — + the minimum key sets and the `default_*` shapes are in + [machine-profiles.md](machine-profiles.md#the-machine-variant). +7. Run the tool and validate — follow + [Creating or modifying a profile](../SKILL.md#creating-or-modifying-a-profile). `generate-id` is not + optional for a new bundle: the validator loads presets that have no `setting_id`, but `check` fails + every one of them. `update-index` will fill the four `*_list` arrays for you once the files exist, so + step 2 only needs the bundle metadata to be right. + +## `resources/profiles_template/` + +A separate tree (`Template.json` + `Template/`) holding filament and process templates. It is **not** a +scaffold for shipped profiles — `CreatePresetsDialog.cpp` reads it for the in-app "create a custom +printer/filament" wizard, so editing it changes what users get when they create a custom preset. +`check_profile.sh`'s validator checks default to `resources/profiles` (redirectable with `-p`), and so +does `orca_profile_tool.py` (redirectable with `--profiles`, plus `--snapshot` for the id checks); +neither covers this tree. diff --git a/resources/profiles/Afinia.json b/resources/profiles/Afinia.json index 517d0148c3..e65ced0f68 100644 --- a/resources/profiles/Afinia.json +++ b/resources/profiles/Afinia.json @@ -1,6 +1,6 @@ { "name": "Afinia", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Afinia configurations", "machine_model_list": [ diff --git a/resources/profiles/Afinia/machine/Afinia H+1(HS).json b/resources/profiles/Afinia/machine/Afinia H+1(HS).json index fc724895ef..87e6a0e6a6 100644 --- a/resources/profiles/Afinia/machine/Afinia H+1(HS).json +++ b/resources/profiles/Afinia/machine/Afinia H+1(HS).json @@ -8,5 +8,5 @@ "bed_model": "", "bed_texture": "", "hotend_model": "", - "default_materials": "Afinia ABS;Afinia PLA" + "default_materials": "Afinia ABS@HS;Afinia PLA@HS" } diff --git a/resources/profiles/Afinia/machine/fdm_afinia_common.json b/resources/profiles/Afinia/machine/fdm_afinia_common.json index 9a567074ca..2ddf8bbd40 100644 --- a/resources/profiles/Afinia/machine/fdm_afinia_common.json +++ b/resources/profiles/Afinia/machine/fdm_afinia_common.json @@ -1,9 +1,9 @@ { "type": "machine", "name": "fdm_afinia_common", + "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", - "inherits": "fdm_machine_common", "gcode_flavor": "klipper", "machine_max_acceleration_e": [ "5000", @@ -117,15 +117,12 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ "1" ], - "default_filament_profile": [ - "" - ], + "default_filament_profile": [], "default_print_profile": "0.20mm Standard @Afinia H+1(HS)", "bed_exclude_area": [ "0x0" diff --git a/resources/profiles/Afinia/machine/fdm_machine_common.json b/resources/profiles/Afinia/machine/fdm_machine_common.json index d4a5c3be25..fbe40f97e3 100644 --- a/resources/profiles/Afinia/machine/fdm_machine_common.json +++ b/resources/profiles/Afinia/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json index 571fdf3e01..8f1a939266 100644 --- a/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/process/0.18mm Fine @Afinia H+1(HS) 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a smaller layer height and results in smoother surface and higher printing quality.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Afinia H+1(HS) 0.6 nozzle" ] diff --git a/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json index 1d984a149d..3a3c297454 100644 --- a/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/process/0.24mm Standard @Afinia H+1(HS) 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a balanced layer height for good quality and reasonable printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Afinia H+1(HS) 0.6 nozzle" ] diff --git a/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json index 187bb12009..ed544ebe3f 100644 --- a/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/process/0.30mm Standard @Afinia H+1(HS) 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Afinia H+1(HS) 0.6 nozzle" ] diff --git a/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json index 63fc4df090..6a87a835c9 100644 --- a/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/process/0.30mm Strength @Afinia H+1(HS) 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height with optimized settings for stronger parts.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "sparse_infill_density": "25%", "wall_loops": "3", "compatible_printers": [ diff --git a/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json index c693fc468b..0417c687ec 100644 --- a/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/process/0.36mm Draft @Afinia H+1(HS) 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a bigger layer height for faster printing but with more visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Afinia H+1(HS) 0.6 nozzle" ] diff --git a/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json index e9f4057178..5dcb70660c 100644 --- a/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/process/0.42mm Extra Draft @Afinia H+1(HS) 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has the biggest layer height for fastest printing but with very visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Afinia H+1(HS) 0.6 nozzle" ] diff --git a/resources/profiles/Afinia/process/fdm_process_afinia_common.json b/resources/profiles/Afinia/process/fdm_process_afinia_common.json index 04c0e678ec..803080ada3 100644 --- a/resources/profiles/Afinia/process/fdm_process_afinia_common.json +++ b/resources/profiles/Afinia/process/fdm_process_afinia_common.json @@ -21,7 +21,6 @@ "top_surface_acceleration": "2000", "initial_layer_acceleration": "500", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_line_width": "0.5", "initial_layer_speed": "50", "initial_layer_infill_speed": "90", diff --git a/resources/profiles/Afinia/process/fdm_process_common.json b/resources/profiles/Afinia/process/fdm_process_common.json index ca4d181e78..26eb3a50a0 100644 --- a/resources/profiles/Afinia/process/fdm_process_common.json +++ b/resources/profiles/Afinia/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "50", diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json index 098b1df003..945378db9c 100644 --- a/resources/profiles/Anker.json +++ b/resources/profiles/Anker.json @@ -1,6 +1,6 @@ { "name": "Anker", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "0", "description": "Anker configurations", "machine_model_list": [ diff --git a/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json b/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json index 7fade72381..d88abdbda4 100644 --- a/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json +++ b/resources/profiles/Anker/machine/Anker M5 All-Metal Hot End.json @@ -7,5 +7,5 @@ "family": "Anker", "machine_tech": "FFF", "model_id": "V8111v2", - "default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker" + "default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker;Generic PLA @Anker 0.2 nozzle;Generic PLA @Anker 0.25 nozzle" } diff --git a/resources/profiles/Anker/machine/Anker M5.json b/resources/profiles/Anker/machine/Anker M5.json index 5c9839d1ff..6cafaebd42 100644 --- a/resources/profiles/Anker/machine/Anker M5.json +++ b/resources/profiles/Anker/machine/Anker M5.json @@ -7,5 +7,5 @@ "family": "Anker", "machine_tech": "FFF", "model_id": "V8111", - "default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker" + "default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker;Generic PLA @Anker 0.2 nozzle;Generic PLA @Anker 0.25 nozzle" } diff --git a/resources/profiles/Anker/machine/Anker M5C.json b/resources/profiles/Anker/machine/Anker M5C.json index cf539851e5..91cd139cd8 100644 --- a/resources/profiles/Anker/machine/Anker M5C.json +++ b/resources/profiles/Anker/machine/Anker M5C.json @@ -7,5 +7,5 @@ "family": "Anker", "machine_tech": "FFF", "model_id": "V81101C3", - "default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker" + "default_materials": "Generic PLA @Anker;Generic PLA+ @Anker;Generic PLA Silk @Anker;Generic TPU @Anker;Generic PETG @Anker;Generic PLA @Anker 0.2 nozzle;Generic PLA @Anker 0.25 nozzle" } diff --git a/resources/profiles/Anker/machine/fdm_machine_common.json b/resources/profiles/Anker/machine/fdm_machine_common.json index 76e4568f42..b486b69bc1 100644 --- a/resources/profiles/Anker/machine/fdm_machine_common.json +++ b/resources/profiles/Anker/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "extruder_offset": [ "0x0" ], - "silent_mode": "0", "machine_max_acceleration_e": [ "4000" ], diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json index 1c44d6ec69..85dce20a81 100644 --- a/resources/profiles/Anycubic.json +++ b/resources/profiles/Anycubic.json @@ -1,6 +1,6 @@ { "name": "Anycubic", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Anycubic configurations", "machine_model_list": [ diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json index 99d8da0f4b..884c07a791 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "ABS" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json index 95d5884132..1a67149acc 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -204,9 +201,6 @@ "filament_type": [ "ABS" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json index 3a6e2c9073..644fbe9f06 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "ABS" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json index f49664c14b..4aaf07851e 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json index 790d365ee5..2356b2b46f 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json index 05d943ece7..6e4a5981cf 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -204,9 +201,6 @@ "filament_type": [ "ASA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json index 2a43e7b355..44aecae10a 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "ASA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json index 1b038f7ba0..a86f5cf27f 100644 --- a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json index 2d5c70f60b..61c9ae06bb 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PEBA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json index 213ee1ce70..271c2cbd31 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json index fbab6ab82c..ae2c4ea617 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PETG" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json index 5966ceb3dd..21a6dab470 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -204,9 +201,6 @@ "filament_type": [ "PETG" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json index 13c1aae54f..b170d4234f 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PETG" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json index 85edb1eca9..a1ea9ea067 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json index 7faa84782c..3d41b19d51 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json index 583473ed30..427d09ec0b 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json index 8e531b88a4..fdbd1987cb 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json index 01b3d45f23..c06ecd26e7 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json index 2898403b36..8263451aa2 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.2 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json index a4e34756ec..36149ebfcb 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json index af7e374dc7..8de722c472 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.6 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json index 5c8936316f..35173c7c21 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 0.8 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json index 504a4b382c..3c612d7aca 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json index df464f2fa9..2a33fab35f 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json index 4e60bf4527..e08e57acf0 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json index 80c120870e..7c49813853 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json index 43ec857824..bb8d9f2424 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json index 9cb1eef59f..ee4ba7f373 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json index 5b069135b3..4a8f9c4fff 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json index eb59d710e0..18baed2def 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json index 9b37a8911c..dab5df7d46 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json index 03ea837c0c..50ab8dc649 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json index 474deb3deb..c0b72e9dc8 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json index 7dad057149..ddd4e1d96c 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json index d7832ced4c..655ce81b7c 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json index 9aebb3860e..48fa611ab1 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json index 166e46e620..89813c64cc 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json index 0ea21e81ed..ab7642a285 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json index 59fd701496..9f28aa798a 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle.json @@ -111,9 +111,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -183,9 +180,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json index a80ab1d88f..fd51691282 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json index d31d75f532..a44bbfac9d 100644 --- a/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json index 5141d90404..9831c55484 100644 --- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "TPU" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json index d6b5217879..d38d83684b 100644 --- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -204,9 +201,6 @@ "filament_type": [ "TPU" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json index a5f6e735b0..5972bc0d37 100644 --- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "TPU" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json index d17fd1217a..e1649e5b0b 100644 --- a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json index 988340c1eb..0f273afbef 100644 --- a/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Generic ABS @Anycubic Kobra 3 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json index a81795f7c0..1a2368dcfd 100644 --- a/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -120,9 +120,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "28" ], @@ -204,9 +201,6 @@ "filament_type": [ "PETG" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json index 369198b146..6b5dc78c98 100644 --- a/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json index 9497594f62..663294b14b 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json @@ -197,7 +197,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json index f28ac191b3..c0d013f4ae 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Kobra 2 Max_buildplate_model.stl", "bed_texture": "Anycubic Kobra 2 Max_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Max 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Max 0.4 nozzle" + "default_materials": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle;Generic ABS @System;Generic TPU @System" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json index f3d67776af..43e6d317ef 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json @@ -201,7 +201,6 @@ "100" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json index 1cce9bddff..bbf71349cf 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json @@ -204,7 +204,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json index 9db9eec174..30b4b2c084 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Kobra 2 Plus_buildplate_model.stl", "bed_texture": "Anycubic Kobra 2 Plus_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Plus 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Plus 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Plus 0.4 nozzle" + "default_materials": "Anycubic PLA @Anycubic Kobra 2 Plus 0.4 nozzle;Generic ABS @System;Generic TPU @System" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json index 690f77a01c..64e1da1fb9 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json @@ -202,7 +202,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json index 87a629fea2..e278a2357f 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Kobra 2 Pro_buildplate_model.stl", "bed_texture": "Anycubic Kobra 2 Pro_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PETG @Anycubic Kobra 2 Pro 0.4 nozzle;Generic TPU @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 2 Pro 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 2 Pro 0.4 nozzle" + "default_materials": "Anycubic PLA @Anycubic Kobra 2 Pro 0.4 nozzle;Generic ABS @System;Generic TPU @System" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json index cbd4a67cfb..0543b1818f 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json @@ -208,7 +208,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json index 624233053e..e3cc91d26b 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json @@ -210,7 +210,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json index d613138128..ec4e3ef986 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json @@ -208,7 +208,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json index 60b3864454..4e67d80ac1 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json @@ -208,7 +208,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json index dbb112bfae..ed52a91b21 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json @@ -20,15 +20,15 @@ "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle", "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle", "Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle", - "Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle", - "Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle", + "Generic PLA @Anycubic", + "Generic PLA Silk @System", "Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle", "Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle", "Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle", "Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle", - "Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle", - "Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle", - "Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle" + "Generic ABS @Anycubic", + "Generic PETG @Anycubic", + "Generic TPU @Anycubic" ], "disable_m73": "0", "gcode_flavor": "klipper", @@ -252,7 +252,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "1", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json index 272d19cd75..811abb2d5f 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.6 nozzle.json @@ -222,7 +222,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "1", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json index 993258d59b..41c5a6c2a3 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.8 nozzle.json @@ -225,7 +225,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "1", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json index 03047b45ea..990c65bae9 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max.json @@ -9,5 +9,5 @@ "bed_texture": "Anycubic Kobra 3 Max_buildplate_texture.svg", "default_bed_type": "Textured PEI Plate", "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle;Generic TPU @Anycubic Kobra 3 Max 0.4 nozzle" + "default_materials": "Anycubic PLA @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 Max 0.4 nozzle;Generic PLA @Anycubic;Generic PLA Silk @System;Anycubic ABS @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic PEBA 95A @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.4 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.6 nozzle;Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle;Generic ABS @Anycubic;Generic PETG @Anycubic;Generic PETG Basic @Anycubic Kobra 3 Max 0.4 nozzle;Generic TPU @Anycubic" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json index b33c096a26..f87f47ad68 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Kobra 3_buildplate_model.stl", "bed_texture": "Anycubic Kobra 3_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle" + "default_materials": "Anycubic PLA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra 3 0.4 nozzle;Generic ABS @Anycubic Kobra 3 0.4 nozzle;Anycubic PETG @Anycubic Kobra 3 0.4 nozzle;Generic TPU @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA Slik @Anycubic Kobra 3 0.4 nozzle;Anycubic ASA @Anycubic Kobra 3 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 0.8 nozzle" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json index 41b6e7b3e1..fc99bbd49f 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo 0.4 nozzle.json @@ -201,7 +201,6 @@ "100" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json index 25a16805e1..d940eeb745 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra Neo.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Kobra Neo_buildplate_model.stl", "bed_texture": "Anycubic Kobra Neo_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic PLA @Anycubic" + "default_materials": "Generic PLA @Anycubic;Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json index 9ca15821da..94d82b7c27 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json @@ -201,7 +201,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json index 7e6195aca7..8786b75afa 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json @@ -1,252 +1,251 @@ -{ - "type": "machine", - "name": "Anycubic Kobra S1 Max 0.25 nozzle", - "inherits": "fdm_machine_common", - "from": "system", - "setting_id": "Puudpg2z8v7I6IQA", - "instantiation": "true", - "printer_technology": "FFF", - "printer_settings_id": "Anycubic Kobra S1 Max 0.25 nozzle", - "printer_model": "Anycubic Kobra S1 Max", - "printer_variant": "0.25", - "nozzle_diameter": [ - "0.25" - ], - "default_print_profile": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "default_filament_profile": [ - "Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle" - ], - "disable_m73": "0", - "gcode_flavor": "klipper", - "printable_area": [ - "0x0", - "350x0", - "350x350", - "0x350" - ], - "printable_height": "350", - "thumbnails": "230x110/PNG", - "thumbnails_format": "PNG", - "thumbnails_internal": "512x512/PNG/top", - "thumbnails_internal_switch": "1", - "adaptive_bed_mesh_margin": "0", - "auxiliary_fan": "1", - "bbl_use_printhost": "0", - "bed_custom_model": "", - "bed_custom_texture": "", - "bed_exclude_area": [], - "bed_mesh_max": "0,0", - "bed_mesh_min": "0,0", - "bed_mesh_probe_distance": "0,0", - "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", - "best_object_pos": "0.5,0.5", - "change_extrusion_role_gcode": "", - "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", - "cooling_tube_length": "0", - "cooling_tube_retraction": "0", - "deretraction_speed": [ - "0" - ], - "emit_machine_limits_to_gcode": "1", - "enable_filament_ramming": "0", - "enable_long_retraction_when_cut": "0", - "extra_loading_move": "0", - "extruder_clearance_height_to_lid": "340", - "extruder_clearance_height_to_rod": "30", - "extruder_clearance_radius": "55", - "extruder_colour": [ - "FF4D4F" - ], - "extruder_offset": [ - "0x0" - ], - "fan_kickstart": "0", - "fan_speedup_overhangs": "1", - "fan_speedup_time": "0", - "head_wrap_detect_zone": [], - "high_current_on_filament_swap": "0", - "host_type": "octoprint", - "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", - "long_retractions_when_cut": [ - "0" - ], - "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", - "machine_load_filament_time": "0", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "400", - "400", - "400" - ], - "machine_max_jerk_e": [ - "1", - "1", - "1" - ], - "machine_max_jerk_x": [ - "15", - "15", - "15" - ], - "machine_max_jerk_y": [ - "15", - "15", - "15" - ], - "machine_max_jerk_z": [ - "1", - "1", - "1" - ], - "machine_max_speed_e": [ - "80", - "40", - "104" - ], - "machine_max_speed_x": [ - "600", - "300", - "780" - ], - "machine_max_speed_y": [ - "600", - "300", - "780" - ], - "machine_max_speed_z": [ - "10", - "5", - "13" - ], - "machine_min_extruding_rate": [ - "0", - "0", - "0" - ], - "machine_min_travel_rate": [ - "0", - "0", - "0" - ], - "machine_pause_gcode": "M600", - "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", - "machine_tool_change_time": "0", - "machine_unload_filament_time": "0", - "manual_filament_change": "0", - "max_layer_height": [ - "0.18" - ], - "min_layer_height": [ - "0.05" - ], - "nozzle_height": "4", - "nozzle_hrc": "0", - "nozzle_type": "brass", - "nozzle_volume": "107", - "parking_pos_retraction": "0", - "pellet_modded_printer": "0", - "preferred_orientation": "0", - "printer_flush_multiplier": "1", - "printer_notes": "", - "printer_structure": "corexy", - "printhost_authorization_type": "key", - "printhost_ssl_ignore_revoke": "0", - "printing_by_object_gcode": "", - "purge_in_prime_tower": "0", - "retract_before_wipe": [ - "0%" - ], - "retract_length_toolchange": [ - "0" - ], - "retract_lift_above": [ - "0" - ], - "retract_lift_below": [ - "348" - ], - "retract_lift_enforce": [ - "All Surfaces" - ], - "retract_on_top_layer": [ - "1" - ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], - "retract_when_changing_layer": [ - "1" - ], - "retraction_distances_when_cut": [ - "0" - ], - "retraction_length": [ - "0.4" - ], - "retraction_minimum_travel": [ - "1" - ], - "retraction_speed": [ - "30" - ], - "scan_first_layer": "0", - "silent_mode": "1", - "single_extruder_multi_material": "1", - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "support_multi_bed_types": "1", - "template_custom_gcode": "", - "time_cost": "0", - "time_lapse_gcode": "", - "travel_slope": [ - "3" - ], - "upward_compatible_machine": [], - "use_firmware_retraction": "0", - "use_relative_e_distances": "1", - "wipe": [ - "1" - ], - "wipe_distance": [ - "2" - ], - "z_hop": [ - "0.4" - ], - "z_hop_types": [ - "Slope Lift" - ], - "z_offset": "0" -} +{ + "type": "machine", + "name": "Anycubic Kobra S1 Max 0.25 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "Puudpg2z8v7I6IQA", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra S1 Max 0.25 nozzle", + "printer_model": "Anycubic Kobra S1 Max", + "printer_variant": "0.25", + "nozzle_diameter": [ + "0.25" + ], + "default_print_profile": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "0" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "340", + "extruder_clearance_height_to_rod": "30", + "extruder_clearance_radius": "55", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "400", + "400", + "400" + ], + "machine_max_jerk_e": [ + "1", + "1", + "1" + ], + "machine_max_jerk_x": [ + "15", + "15", + "15" + ], + "machine_max_jerk_y": [ + "15", + "15", + "15" + ], + "machine_max_jerk_z": [ + "1", + "1", + "1" + ], + "machine_max_speed_e": [ + "80", + "40", + "104" + ], + "machine_max_speed_x": [ + "600", + "300", + "780" + ], + "machine_max_speed_y": [ + "600", + "300", + "780" + ], + "machine_max_speed_z": [ + "10", + "5", + "13" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.18" + ], + "min_layer_height": [ + "0.05" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "corexy", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "348" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "0.4" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Slope Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json index 482534d2de..f0ba840124 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,252 +1,251 @@ -{ - "type": "machine", - "name": "Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_machine_common", - "from": "system", - "setting_id": "gI3IJRLKNc1fyiO6", - "instantiation": "true", - "printer_technology": "FFF", - "printer_settings_id": "Anycubic Kobra S1 Max 0.4 nozzle", - "printer_model": "Anycubic Kobra S1 Max", - "printer_variant": "0.4", - "nozzle_diameter": [ - "0.4" - ], - "default_print_profile": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "default_filament_profile": [ - "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle" - ], - "disable_m73": "0", - "gcode_flavor": "klipper", - "printable_area": [ - "0x0", - "350x0", - "350x350", - "0x350" - ], - "printable_height": "350", - "thumbnails": "230x110/PNG", - "thumbnails_format": "PNG", - "thumbnails_internal": "512x512/PNG/top", - "thumbnails_internal_switch": "1", - "adaptive_bed_mesh_margin": "0", - "auxiliary_fan": "1", - "bbl_use_printhost": "0", - "bed_custom_model": "", - "bed_custom_texture": "", - "bed_exclude_area": [], - "bed_mesh_max": "0,0", - "bed_mesh_min": "0,0", - "bed_mesh_probe_distance": "0,0", - "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", - "best_object_pos": "0.5,0.5", - "change_extrusion_role_gcode": "", - "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", - "cooling_tube_length": "0", - "cooling_tube_retraction": "0", - "deretraction_speed": [ - "0" - ], - "emit_machine_limits_to_gcode": "1", - "enable_filament_ramming": "0", - "enable_long_retraction_when_cut": "0", - "extra_loading_move": "0", - "extruder_clearance_height_to_lid": "340", - "extruder_clearance_height_to_rod": "30", - "extruder_clearance_radius": "55", - "extruder_colour": [ - "FF4D4F" - ], - "extruder_offset": [ - "0x0" - ], - "fan_kickstart": "0", - "fan_speedup_overhangs": "1", - "fan_speedup_time": "0", - "head_wrap_detect_zone": [], - "high_current_on_filament_swap": "0", - "host_type": "octoprint", - "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", - "long_retractions_when_cut": [ - "0" - ], - "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", - "machine_load_filament_time": "0", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "400", - "400", - "400" - ], - "machine_max_jerk_e": [ - "1", - "1", - "1" - ], - "machine_max_jerk_x": [ - "15", - "15", - "15" - ], - "machine_max_jerk_y": [ - "15", - "15", - "15" - ], - "machine_max_jerk_z": [ - "1", - "1", - "1" - ], - "machine_max_speed_e": [ - "80", - "40", - "104" - ], - "machine_max_speed_x": [ - "600", - "300", - "780" - ], - "machine_max_speed_y": [ - "600", - "300", - "780" - ], - "machine_max_speed_z": [ - "10", - "5", - "13" - ], - "machine_min_extruding_rate": [ - "0", - "0", - "0" - ], - "machine_min_travel_rate": [ - "0", - "0", - "0" - ], - "machine_pause_gcode": "M600", - "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", - "machine_tool_change_time": "0", - "machine_unload_filament_time": "0", - "manual_filament_change": "0", - "max_layer_height": [ - "0.28" - ], - "min_layer_height": [ - "0.08" - ], - "nozzle_height": "4", - "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "107", - "parking_pos_retraction": "0", - "pellet_modded_printer": "0", - "preferred_orientation": "0", - "printer_flush_multiplier": "1", - "printer_notes": "", - "printer_structure": "corexy", - "printhost_authorization_type": "key", - "printhost_ssl_ignore_revoke": "0", - "printing_by_object_gcode": "", - "purge_in_prime_tower": "0", - "retract_before_wipe": [ - "0%" - ], - "retract_length_toolchange": [ - "0" - ], - "retract_lift_above": [ - "0" - ], - "retract_lift_below": [ - "348" - ], - "retract_lift_enforce": [ - "All Surfaces" - ], - "retract_on_top_layer": [ - "1" - ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], - "retract_when_changing_layer": [ - "1" - ], - "retraction_distances_when_cut": [ - "0" - ], - "retraction_length": [ - "0.4" - ], - "retraction_minimum_travel": [ - "1" - ], - "retraction_speed": [ - "30" - ], - "scan_first_layer": "0", - "silent_mode": "1", - "single_extruder_multi_material": "1", - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "support_multi_bed_types": "1", - "template_custom_gcode": "", - "time_cost": "0", - "time_lapse_gcode": "", - "travel_slope": [ - "3" - ], - "upward_compatible_machine": [], - "use_firmware_retraction": "0", - "use_relative_e_distances": "1", - "wipe": [ - "1" - ], - "wipe_distance": [ - "2" - ], - "z_hop": [ - "0.4" - ], - "z_hop_types": [ - "Slope Lift" - ], - "z_offset": "0" -} +{ + "type": "machine", + "name": "Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "gI3IJRLKNc1fyiO6", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra S1 Max 0.4 nozzle", + "printer_model": "Anycubic Kobra S1 Max", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "default_print_profile": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "0" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "340", + "extruder_clearance_height_to_rod": "30", + "extruder_clearance_radius": "55", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "400", + "400", + "400" + ], + "machine_max_jerk_e": [ + "1", + "1", + "1" + ], + "machine_max_jerk_x": [ + "15", + "15", + "15" + ], + "machine_max_jerk_y": [ + "15", + "15", + "15" + ], + "machine_max_jerk_z": [ + "1", + "1", + "1" + ], + "machine_max_speed_e": [ + "80", + "40", + "104" + ], + "machine_max_speed_x": [ + "600", + "300", + "780" + ], + "machine_max_speed_y": [ + "600", + "300", + "780" + ], + "machine_max_speed_z": [ + "10", + "5", + "13" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "corexy", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "348" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "0.4" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Slope Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json index 0feeec8104..604d488bdb 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json @@ -1,252 +1,251 @@ -{ - "type": "machine", - "name": "Anycubic Kobra S1 Max 0.6 nozzle", - "inherits": "fdm_machine_common", - "from": "system", - "setting_id": "p7ilBBLpGn5OYr2e", - "instantiation": "true", - "printer_technology": "FFF", - "printer_settings_id": "Anycubic Kobra S1 Max 0.6 nozzle", - "printer_model": "Anycubic Kobra S1 Max", - "printer_variant": "0.6", - "nozzle_diameter": [ - "0.6" - ], - "default_print_profile": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "default_filament_profile": [ - "Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle" - ], - "disable_m73": "0", - "gcode_flavor": "klipper", - "printable_area": [ - "0x0", - "350x0", - "350x350", - "0x350" - ], - "printable_height": "350", - "thumbnails": "230x110/PNG", - "thumbnails_format": "PNG", - "thumbnails_internal": "512x512/PNG/top", - "thumbnails_internal_switch": "1", - "adaptive_bed_mesh_margin": "0", - "auxiliary_fan": "1", - "bbl_use_printhost": "0", - "bed_custom_model": "", - "bed_custom_texture": "", - "bed_exclude_area": [], - "bed_mesh_max": "0,0", - "bed_mesh_min": "0,0", - "bed_mesh_probe_distance": "0,0", - "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", - "best_object_pos": "0.5,0.5", - "change_extrusion_role_gcode": "", - "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", - "cooling_tube_length": "0", - "cooling_tube_retraction": "0", - "deretraction_speed": [ - "0" - ], - "emit_machine_limits_to_gcode": "1", - "enable_filament_ramming": "0", - "enable_long_retraction_when_cut": "0", - "extra_loading_move": "0", - "extruder_clearance_height_to_lid": "340", - "extruder_clearance_height_to_rod": "30", - "extruder_clearance_radius": "55", - "extruder_colour": [ - "FF4D4F" - ], - "extruder_offset": [ - "0x0" - ], - "fan_kickstart": "0", - "fan_speedup_overhangs": "1", - "fan_speedup_time": "0", - "head_wrap_detect_zone": [], - "high_current_on_filament_swap": "0", - "host_type": "octoprint", - "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", - "long_retractions_when_cut": [ - "0" - ], - "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", - "machine_load_filament_time": "0", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "400", - "400", - "400" - ], - "machine_max_jerk_e": [ - "1", - "1", - "1" - ], - "machine_max_jerk_x": [ - "15", - "15", - "15" - ], - "machine_max_jerk_y": [ - "15", - "15", - "15" - ], - "machine_max_jerk_z": [ - "1", - "1", - "1" - ], - "machine_max_speed_e": [ - "80", - "40", - "104" - ], - "machine_max_speed_x": [ - "600", - "300", - "780" - ], - "machine_max_speed_y": [ - "600", - "300", - "780" - ], - "machine_max_speed_z": [ - "10", - "5", - "13" - ], - "machine_min_extruding_rate": [ - "0", - "0", - "0" - ], - "machine_min_travel_rate": [ - "0", - "0", - "0" - ], - "machine_pause_gcode": "M600", - "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", - "machine_tool_change_time": "0", - "machine_unload_filament_time": "0", - "manual_filament_change": "0", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "nozzle_height": "4", - "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "107", - "parking_pos_retraction": "0", - "pellet_modded_printer": "0", - "preferred_orientation": "0", - "printer_flush_multiplier": "1", - "printer_notes": "", - "printer_structure": "corexy", - "printhost_authorization_type": "key", - "printhost_ssl_ignore_revoke": "0", - "printing_by_object_gcode": "", - "purge_in_prime_tower": "0", - "retract_before_wipe": [ - "0%" - ], - "retract_length_toolchange": [ - "0" - ], - "retract_lift_above": [ - "0" - ], - "retract_lift_below": [ - "348" - ], - "retract_lift_enforce": [ - "All Surfaces" - ], - "retract_on_top_layer": [ - "1" - ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], - "retract_when_changing_layer": [ - "1" - ], - "retraction_distances_when_cut": [ - "0" - ], - "retraction_length": [ - "0.4" - ], - "retraction_minimum_travel": [ - "1" - ], - "retraction_speed": [ - "30" - ], - "scan_first_layer": "0", - "silent_mode": "1", - "single_extruder_multi_material": "1", - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "support_multi_bed_types": "1", - "template_custom_gcode": "", - "time_cost": "0", - "time_lapse_gcode": "", - "travel_slope": [ - "3" - ], - "upward_compatible_machine": [], - "use_firmware_retraction": "0", - "use_relative_e_distances": "1", - "wipe": [ - "1" - ], - "wipe_distance": [ - "2" - ], - "z_hop": [ - "0.4" - ], - "z_hop_types": [ - "Slope Lift" - ], - "z_offset": "0" -} +{ + "type": "machine", + "name": "Anycubic Kobra S1 Max 0.6 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "p7ilBBLpGn5OYr2e", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra S1 Max 0.6 nozzle", + "printer_model": "Anycubic Kobra S1 Max", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "default_print_profile": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "0" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "340", + "extruder_clearance_height_to_rod": "30", + "extruder_clearance_radius": "55", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "400", + "400", + "400" + ], + "machine_max_jerk_e": [ + "1", + "1", + "1" + ], + "machine_max_jerk_x": [ + "15", + "15", + "15" + ], + "machine_max_jerk_y": [ + "15", + "15", + "15" + ], + "machine_max_jerk_z": [ + "1", + "1", + "1" + ], + "machine_max_speed_e": [ + "80", + "40", + "104" + ], + "machine_max_speed_x": [ + "600", + "300", + "780" + ], + "machine_max_speed_y": [ + "600", + "300", + "780" + ], + "machine_max_speed_z": [ + "10", + "5", + "13" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "corexy", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "348" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "0.4" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Slope Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json index 172c30885e..d51a6fc560 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json @@ -1,252 +1,251 @@ -{ - "type": "machine", - "name": "Anycubic Kobra S1 Max 0.8 nozzle", - "inherits": "fdm_machine_common", - "from": "system", - "setting_id": "eD3ZKZ62sl6JMvUr", - "instantiation": "true", - "printer_technology": "FFF", - "printer_settings_id": "Anycubic Kobra S1 Max 0.8 nozzle", - "printer_model": "Anycubic Kobra S1 Max", - "printer_variant": "0.8", - "nozzle_diameter": [ - "0.8" - ], - "default_print_profile": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "default_filament_profile": [ - "Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle" - ], - "disable_m73": "0", - "gcode_flavor": "klipper", - "printable_area": [ - "0x0", - "350x0", - "350x350", - "0x350" - ], - "printable_height": "350", - "thumbnails": "230x110/PNG", - "thumbnails_format": "PNG", - "thumbnails_internal": "512x512/PNG/top", - "thumbnails_internal_switch": "1", - "adaptive_bed_mesh_margin": "0", - "auxiliary_fan": "1", - "bbl_use_printhost": "0", - "bed_custom_model": "", - "bed_custom_texture": "", - "bed_exclude_area": [], - "bed_mesh_max": "0,0", - "bed_mesh_min": "0,0", - "bed_mesh_probe_distance": "0,0", - "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", - "best_object_pos": "0.5,0.5", - "change_extrusion_role_gcode": "", - "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", - "cooling_tube_length": "0", - "cooling_tube_retraction": "0", - "deretraction_speed": [ - "0" - ], - "emit_machine_limits_to_gcode": "1", - "enable_filament_ramming": "0", - "enable_long_retraction_when_cut": "0", - "extra_loading_move": "0", - "extruder_clearance_height_to_lid": "340", - "extruder_clearance_height_to_rod": "30", - "extruder_clearance_radius": "55", - "extruder_colour": [ - "FF4D4F" - ], - "extruder_offset": [ - "0x0" - ], - "fan_kickstart": "0", - "fan_speedup_overhangs": "1", - "fan_speedup_time": "0", - "head_wrap_detect_zone": [], - "high_current_on_filament_swap": "0", - "host_type": "octoprint", - "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", - "long_retractions_when_cut": [ - "0" - ], - "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", - "machine_load_filament_time": "0", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "400", - "400", - "400" - ], - "machine_max_jerk_e": [ - "1", - "1", - "1" - ], - "machine_max_jerk_x": [ - "15", - "15", - "15" - ], - "machine_max_jerk_y": [ - "15", - "15", - "15" - ], - "machine_max_jerk_z": [ - "1", - "1", - "1" - ], - "machine_max_speed_e": [ - "80", - "40", - "104" - ], - "machine_max_speed_x": [ - "600", - "300", - "780" - ], - "machine_max_speed_y": [ - "600", - "300", - "780" - ], - "machine_max_speed_z": [ - "10", - "5", - "13" - ], - "machine_min_extruding_rate": [ - "0", - "0", - "0" - ], - "machine_min_travel_rate": [ - "0", - "0", - "0" - ], - "machine_pause_gcode": "M600", - "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", - "machine_tool_change_time": "0", - "machine_unload_filament_time": "0", - "manual_filament_change": "0", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "nozzle_height": "4", - "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "107", - "parking_pos_retraction": "0", - "pellet_modded_printer": "0", - "preferred_orientation": "0", - "printer_flush_multiplier": "1", - "printer_notes": "", - "printer_structure": "corexy", - "printhost_authorization_type": "key", - "printhost_ssl_ignore_revoke": "0", - "printing_by_object_gcode": "", - "purge_in_prime_tower": "0", - "retract_before_wipe": [ - "0%" - ], - "retract_length_toolchange": [ - "0" - ], - "retract_lift_above": [ - "0" - ], - "retract_lift_below": [ - "348" - ], - "retract_lift_enforce": [ - "All Surfaces" - ], - "retract_on_top_layer": [ - "1" - ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], - "retract_when_changing_layer": [ - "1" - ], - "retraction_distances_when_cut": [ - "0" - ], - "retraction_length": [ - "0.4" - ], - "retraction_minimum_travel": [ - "1" - ], - "retraction_speed": [ - "30" - ], - "scan_first_layer": "0", - "silent_mode": "1", - "single_extruder_multi_material": "1", - "support_air_filtration": "0", - "support_chamber_temp_control": "1", - "support_multi_bed_types": "1", - "template_custom_gcode": "", - "time_cost": "0", - "time_lapse_gcode": "", - "travel_slope": [ - "3" - ], - "upward_compatible_machine": [], - "use_firmware_retraction": "0", - "use_relative_e_distances": "1", - "wipe": [ - "1" - ], - "wipe_distance": [ - "2" - ], - "z_hop": [ - "0.4" - ], - "z_hop_types": [ - "Slope Lift" - ], - "z_offset": "0" -} +{ + "type": "machine", + "name": "Anycubic Kobra S1 Max 0.8 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "eD3ZKZ62sl6JMvUr", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra S1 Max 0.8 nozzle", + "printer_model": "Anycubic Kobra S1 Max", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "default_print_profile": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "{if layer_num==0} ; PURGE LINE\nM204 P500\nSET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=9\nG1 Z0.75 F900 ; for object exclusion\nG1 X135 Y352 F18000\nG1 Z.25 F900\nG1 E0.8 F2400\nG1 E0.6 F2400\nG1 F3000\nG1 X205 Y352 E3.72454\nG1 X205 Y352.45 E.0252\nG1 X135 Y352.45 E3.72454\nG1 X135 Y352.02 E.02305\nG1 Z0.5 F600\n{endif}\n", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 S1M\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_+89.9) / 90))}\n{local extrude_length_=flush_length_ / loops_}\n{local time_flush_=int(extrude_length_ * loops_ * 300)}\n;;; M400 P{time_flush_} ; ={flush_length_}*300\n\n; retract and z hop\n; G1 E-0.4 F2400\n; G1 Z{toolchange_z+0.6} F600\n\n; MOVE_TO_IMPACT_POSITION\n;;; G1 X352 Y23 F18000\n;;; G1 X356.5 F6000\n;;; M400\n\n; cut filament\n;;; G1 Y13\n;;; G1 Y23 F600\n;;; M400 P76250\n;;; M400 P35780\n\nT[next_extruder] ; change extruder\n\n; MOVE_TO_PRE_SWEEP_POSITION_SAFE\n;;; G1 Y0 F12000\n;;; G1 X0 F12000\n\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; MOVE_TO_PRE_SWEEP_POSITION\n;;; G1 Y375 F12000\n;;; G1 X105 F12000\n;;; M400\n\n; MOVE_TO_SWEEP_POSITION\n;;; G1 X87 F6000\n;;; G1 Y375 F12000\n;;; M400\n\n; EXIT_THROW_POSITION\n;;; G1 Z{toolchange_z+2.1} F6000\n;;; G1 X105 F12000\n;;; G1 Y352 F12000\n;;; G1 Z{toolchange_z} F600\n;;; G1 E0.4 F2400\n;;; M400\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END\n", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "0" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "340", + "extruder_clearance_height_to_rod": "30", + "extruder_clearance_radius": "55", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "400", + "400", + "400" + ], + "machine_max_jerk_e": [ + "1", + "1", + "1" + ], + "machine_max_jerk_x": [ + "15", + "15", + "15" + ], + "machine_max_jerk_y": [ + "15", + "15", + "15" + ], + "machine_max_jerk_z": [ + "1", + "1", + "1" + ], + "machine_max_speed_e": [ + "80", + "40", + "104" + ], + "machine_max_speed_x": [ + "600", + "300", + "780" + ], + "machine_max_speed_y": [ + "600", + "300", + "780" + ], + "machine_max_speed_z": [ + "10", + "5", + "13" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}\n; first_layer_fan_speed = 2, {int(additional_cooling_fan_speed[initial_tool] * 255 / 100)}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "hardened_steel", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "corexy", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "348" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "0.4" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "0", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Slope Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json index c47f2e7fa2..0f35afd33f 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json @@ -1,12 +1,12 @@ -{ - "type": "machine_model", - "machine_tech": "FFF", - "family": "Anycubic", - "name": "Anycubic Kobra S1 Max", - "model_id": "Anycubic Kobra S1 Max", - "nozzle_diameter": "0.4;0.25;0.6;0.8", - "bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl", - "bed_texture": "Anycubic Kobra S1 Max_buildplate_texture.svg", - "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle" -} +{ + "type": "machine_model", + "machine_tech": "FFF", + "family": "Anycubic", + "name": "Anycubic Kobra S1 Max", + "model_id": "Anycubic Kobra S1 Max", + "nozzle_diameter": "0.4;0.25;0.6;0.8", + "bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl", + "bed_texture": "Anycubic Kobra S1 Max_buildplate_texture.svg", + "hotend_model": "", + "default_materials": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json index 07b3b61536..45a7404183 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Kobra S1_buildplate_model.stl", "bed_texture": "Anycubic Kobra S1_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA SE @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PA @Anycubic Kobra S1 0.4 nozzle;Anycubic PC @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PVA @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle" + "default_materials": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic ABS @Anycubic Kobra S1 0.4 nozzle;Anycubic ASA @Anycubic Kobra S1 0.4 nozzle;Anycubic PETG @Anycubic Kobra S1 0.4 nozzle;Anycubic TPU @Anycubic Kobra S1 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra S1 0.4 nozzle" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json index 5dc35e5584..8e2952b123 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json @@ -14,7 +14,19 @@ ], "default_print_profile": "0.20mm Standard @Anycubic Kobra X 0.4 nozzle;0.08mm Standard @Anycubic Kobra X 0.4 nozzle", "default_filament_profile": [ - "Anycubic PLA @Anycubic Kobra X 0.4 nozzle;Anycubic ABS @Anycubic Kobra X 0.4 nozzle;Anycubic ASA @Anycubic Kobra X 0.4 nozzle;Anycubic PETG @Anycubic Kobra X 0.4 nozzle;Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle;Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle;Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle;Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle;Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle;Anycubic PVA @Anycubic Kobra X 0.4 nozzle;Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle;Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle;Anycubic Generetic PETG @Anycubic Kobra X 0.4 nozzle" + "Anycubic PLA @Anycubic Kobra X 0.4 nozzle", + "Anycubic ABS @Anycubic Kobra X 0.4 nozzle", + "Anycubic ASA @Anycubic Kobra X 0.4 nozzle", + "Anycubic PETG @Anycubic Kobra X 0.4 nozzle", + "Anycubic PLA+ @Anycubic Kobra X 0.4 nozzle", + "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle", + "Anycubic PLA High Speed @Anycubic Kobra X 0.4 nozzle", + "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle", + "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle", + "Anycubic PVA @Anycubic Kobra X 0.4 nozzle", + "Anycubic TPU 95A @Anycubic Kobra X 0.4 nozzle", + "Anycubic TPU for ACE @Anycubic Kobra X 0.4 nozzle", + "Generic PETG @Anycubic Kobra X 0.4 nozzle" ], "disable_m73": "0", "gcode_flavor": "klipper", @@ -188,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "1", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Predator.json b/resources/profiles/Anycubic/machine/Anycubic Predator.json index a3b100c166..b4490d79f9 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Predator.json +++ b/resources/profiles/Anycubic/machine/Anycubic Predator.json @@ -8,5 +8,5 @@ "bed_model": "Anycubic Predator_buildplate_model.stl", "bed_texture": "Anycubic Predator_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic ABS @Anycubic;Generic PLA @Anycubic;Generic PLA-CF @Anycubic;Generic PETG @Anycubic;Generic TPU @Anycubic;Generic ASA @Anycubic;Generic PC @Anycubic;Generic PVA @Anycubic;Generic PA @Anycubic;Generic PA-CF @Anycubic" + "default_materials": "Generic ABS @Anycubic;Generic PLA @Anycubic;Generic PLA-CF @Anycubic;Generic PETG @Anycubic;Generic TPU @Anycubic;Generic ASA @Anycubic;Generic PC @Anycubic;Generic PVA @Anycubic;Generic PA @Anycubic;Generic PA-CF @Anycubic;Generic PLA @System" } diff --git a/resources/profiles/Anycubic/machine/fdm_machine_common.json b/resources/profiles/Anycubic/machine/fdm_machine_common.json index c4ff46a6bf..ac44b6a964 100644 --- a/resources/profiles/Anycubic/machine/fdm_machine_common.json +++ b/resources/profiles/Anycubic/machine/fdm_machine_common.json @@ -126,7 +126,6 @@ "deretraction_speed": [ "30" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", diff --git a/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json index 6ba2afe3b3..80fd42d391 100644 --- a/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/process/0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "bZRQrVuJgsKO0PYK", - "instantiation": "true", - "print_settings_id": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "layer_height": "0.06", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.25 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "50", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.3", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.15", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.3", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "2000", - "internal_solid_infill_line_width": "0.27", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.27", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.27", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "4", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.3", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.06", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.27", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.06", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "7", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.27", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "120", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "4", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "bZRQrVuJgsKO0PYK", + "instantiation": "true", + "print_settings_id": "0.06mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "layer_height": "0.06", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.25 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.3", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.15", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.3", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "2000", + "internal_solid_infill_line_width": "0.27", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.27", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.27", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.3", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.06", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.27", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.06", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.27", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "4", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json index 54a0df5369..5670e7a135 100644 --- a/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.08mm HighDetail @Anycubic Kobra 3 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "7", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json index a4a88b3149..6c8575201a 100644 --- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -136,8 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -198,7 +195,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json index 5626bb449c..7b045f6b74 100644 --- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "bfq9DtBsHIrbsZfD", - "instantiation": "true", - "print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "layer_height": "0.08", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.25 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "50", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.3", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.15", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.3", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "2000", - "internal_solid_infill_line_width": "0.27", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.27", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.27", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "4", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.3", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.08", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.27", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.08", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "7", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.27", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "120", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "4", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "bfq9DtBsHIrbsZfD", + "instantiation": "true", + "print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "layer_height": "0.08", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.25 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.3", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.15", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.3", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "2000", + "internal_solid_infill_line_width": "0.27", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.27", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.27", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.3", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.08", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.27", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.08", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.27", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "4", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json index e49ba929c0..386505ff8e 100644 --- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "E2tI71ShF3oOgMME", - "instantiation": "true", - "print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.08", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "7", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "80", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "50%", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "120", - "ironing_angle": "-1", - "ironing_flow": "8%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "60", - "overhang_1_4_speed": "60", - "overhang_2_4_speed": "30", - "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.08", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "15", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.08", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "9", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "120", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "E2tI71ShF3oOgMME", + "instantiation": "true", + "print_settings_id": "0.08mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.08", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "7", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "80", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "50%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "120", + "ironing_angle": "-1", + "ironing_flow": "8%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "60", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.08", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "15", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.08", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "9", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json index 2b02de44b3..ec1137ad11 100644 --- a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json index 1e8c4a2c90..b508189668 100644 --- a/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json +++ b/resources/profiles/Anycubic/process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "5", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json index 14fe54d530..58a70cf403 100644 --- a/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "OmytVExIkdNyyyKT", - "instantiation": "true", - "print_settings_id": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "layer_height": "0.1", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.25 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "50", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.3", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.15", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.3", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "2000", - "internal_solid_infill_line_width": "0.27", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.27", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.27", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "4", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.3", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.1", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.27", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.1", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "7", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.27", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "120", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "4", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "OmytVExIkdNyyyKT", + "instantiation": "true", + "print_settings_id": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "layer_height": "0.1", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.25 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.3", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.15", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.3", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "2000", + "internal_solid_infill_line_width": "0.27", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.27", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.27", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.3", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.1", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.27", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.1", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.27", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "4", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json index 6fd6f1ace7..95a383016b 100644 --- a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json index a33932e016..d6f37a93c0 100644 --- a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra 3 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "5", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json index c8d7c6f284..39acfedd36 100644 --- a/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json index 0a67e8371a..1ffa05956a 100644 --- a/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "80", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json index 38fd80bfae..7bd3131f87 100644 --- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -136,8 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -198,7 +195,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json index b20feba94a..f01d005bf4 100644 --- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "z8TDucaoilYiK8V1", - "instantiation": "true", - "print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "layer_height": "0.12", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.25 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "50", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.3", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.15", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.3", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "2000", - "internal_solid_infill_line_width": "0.27", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.27", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.27", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "4", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.3", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.12", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.27", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.12", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "7", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.27", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "120", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "4", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "z8TDucaoilYiK8V1", + "instantiation": "true", + "print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "layer_height": "0.12", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.25 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.3", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.15", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.3", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "2000", + "internal_solid_infill_line_width": "0.27", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.27", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.27", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.3", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.12", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.27", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.12", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.27", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "4", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json index 99957845b8..33fcd005e4 100644 --- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "D1bJFkXoVSZ2QLSA", - "instantiation": "true", - "print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.12", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "180", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "50%", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "180", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "60", - "overhang_1_4_speed": "60", - "overhang_2_4_speed": "30", - "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "180", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.12", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "20", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.12", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "7", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "D1bJFkXoVSZ2QLSA", + "instantiation": "true", + "print_settings_id": "0.12mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.12", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "180", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "50%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "180", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "60", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "180", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.12", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "20", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.12", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "7", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json index 29dd4e03f9..73acca4322 100644 --- a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json index b31c2c5af4..15b3b89ad7 100644 --- a/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/process/0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "Hl64YdObrtpqJM2s", - "instantiation": "true", - "print_settings_id": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", - "layer_height": "0.14", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.25 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "5", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "50", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.3", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.15", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.3", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "2000", - "internal_solid_infill_line_width": "0.27", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.27", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.27", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "4", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.3", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.14", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.27", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.14", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "7", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.27", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "120", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "4", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "Hl64YdObrtpqJM2s", + "instantiation": "true", + "print_settings_id": "0.14mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", + "layer_height": "0.14", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.25 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "50", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.3", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.15", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.3", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "2000", + "internal_solid_infill_line_width": "0.27", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.27", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.27", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.3", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.14", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.27", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.14", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.27", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "4", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json index 35c1d4b30a..be2f8b3e9a 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic 4MaxPro2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "2Qq27PfeoCqMAZKw", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json index ff48fca663..0facf331d1 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Chiron.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "fcqsKbEsGbAs6rUU", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json index e74fae9dad..ae5f046053 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "E1VHkuwE0sHTzmb2", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json index 3618dac281..84b0eb87fe 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Kobra2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7H2BzvHgy0o9nc1g", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json index a14a4961dd..8b6af27046 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ukTEpT2XRtJyGKUp", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json index e974680931..27c3ca627f 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic KobraPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "3Gu40CNOXnzDsZfD", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json index 0da034eeb7..0cfc8e7463 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic Vyper.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ln2Zw2E5e3Azq3nc", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json index b4647a7c39..15a208302e 100644 --- a/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.15mm Optimal @Anycubic i3MegaS.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "zKGotAmWJTB14cT8", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json index 04c0b4d8e5..e8180a0034 100644 --- a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "Hiz2L1qh67izjl1e", - "instantiation": "true", - "print_settings_id": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.16", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "4", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "4000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "250", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "100", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "50", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "0", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "50%", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "200", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "2000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "60", - "overhang_1_4_speed": "60", - "overhang_2_4_speed": "30", - "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": "200", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.16", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "25", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.16", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "6", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "Hiz2L1qh67izjl1e", + "instantiation": "true", + "print_settings_id": "0.16mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.16", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "4000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "50%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "200", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "60", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": "200", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "25", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "6", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json index 055dc89ed1..d195a61226 100644 --- a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json index 13f0e7e127..283d8c72b4 100644 --- a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 2 Pro 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json index 469c3c4ba3..8d8e8222e5 100644 --- a/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Optimal @Anycubic Kobra 3 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "4", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json index aab5a3f23c..e4d3bc3a19 100644 --- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "4", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json index 09ff8e393c..02f7fccb93 100644 --- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -136,8 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -198,7 +195,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json index 4b83264a1d..596f35c405 100644 --- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "4", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json index edf43e2875..eeee68080f 100644 --- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "Yl10d32pjposFVu9", - "instantiation": "true", - "print_settings_id": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.16", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "4", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "250", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "100", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "50", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "300", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "50%", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "250", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "200", - "overhang_1_4_speed": "60", - "overhang_2_4_speed": "30", - "overhang_3_4_speed": "10", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "350", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.16", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "25", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.16", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "6", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "200", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "Yl10d32pjposFVu9", + "instantiation": "true", + "print_settings_id": "0.16mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.16", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "50%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "250", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "350", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "25", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "6", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json index 664f118e3d..0b682648d7 100644 --- a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json index ac80f014ab..f6c96e3155 100644 --- a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "80", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json index 4b2fd1df30..bcd1decabe 100644 --- a/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "Y55zuAyFSNMHZlCt", - "instantiation": "true", - "print_settings_id": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "layer_height": "0.18", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.6 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "5000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.62", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.3", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.62", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.62", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.62", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.62", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.62", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.18", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.62", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.18", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.62", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "5000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "Y55zuAyFSNMHZlCt", + "instantiation": "true", + "print_settings_id": "0.18mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "layer_height": "0.18", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.6 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "5000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.62", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.62", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.62", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.18", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.62", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.18", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.62", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "5000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json index f276232436..2f639acd63 100644 --- a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "M7CigEUqzwefI8ed", - "instantiation": "true", - "print_settings_id": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.2", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "250", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "100", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "50", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "250", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "250", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.2", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "5", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "200", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0.05" -} +{ + "type": "process", + "name": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "M7CigEUqzwefI8ed", + "instantiation": "true", + "print_settings_id": "0.20mm High Quality @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.2", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "250", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "250", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0.05" +} diff --git a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json index 75fb6457ea..425e43b467 100644 --- a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json index f0e718b0ff..d446d567b7 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic 4MaxPro2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "4fNa2Y66ms9j0vdh", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json index b92ce992ca..6f1b6475cf 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Chiron.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "4tYPv79lny7OAesb", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json index 0e65291255..4180755994 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json index dc555a5838..ca551062d5 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json index 863a0a0af9..747646cb59 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Plus 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json index 96fa4642c9..7476d37ea1 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 2 Pro 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json index 5573902ecf..8e94d72687 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json index 58b0b90e5e..827ef63836 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -136,8 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -198,7 +195,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json index b1af0fb13d..48307606ae 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json index 0626025cc4..8c1a97ff5e 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json index 6a02522e0e..f345acb65d 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 0.4 nozzle.json @@ -127,8 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "1", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json index 4a00460633..2fef8f1bb5 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "h9txQrwg5GiCgORR", - "instantiation": "true", - "print_settings_id": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.2", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "250", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "100", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "50", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "300", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "250", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "200", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "300", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.2", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "5", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "200", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0.05" -} +{ + "type": "process", + "name": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "h9txQrwg5GiCgORR", + "instantiation": "true", + "print_settings_id": "0.20mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.2", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "250", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "300", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0.05" +} diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json index cbe349b771..3afbbb25f8 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json index c9d3e750a3..393233a992 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "PCsMHJ36HdywhVBA", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json index b68731cb78..c0a529e50c 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dd3a8DNtunKVpWWY", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json index 77e3b32b80..b1a00dda27 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "pqXeGE9OxboQGBMi", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json index 326db3295d..365a863cb5 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic KobraPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ZnZf41QpEAXorp2U", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json index 341ece7bef..e6e5f5ab8a 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Vyper.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jvz2LYWpcGJVgzZn", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json index d0eb582143..d6ffbab4a9 100644 --- a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic i3MegaS.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lI7dHvKmsEmoSw1k", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json index 2ac098d8a7..48a7d490b4 100644 --- a/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Draft @Anycubic Kobra 3 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json index 587aaecfe8..63324007cc 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -136,8 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -198,7 +195,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json index 548f9050fc..fdebb701a7 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "80", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json index aef03dc9b2..a367b48df4 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json index 28aeb2a4a6..338d36d1ac 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "NDu3QAQvTHNboRRR", - "instantiation": "true", - "print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.24", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "230", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "100", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "50", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "230", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "50%", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "230", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "200", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "35", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "230", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "35", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.2", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "4", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "200", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "NDu3QAQvTHNboRRR", + "instantiation": "true", + "print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.24", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "230", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "230", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "50%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "230", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "230", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "35", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json index de6d9f4c09..4363919787 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "ehgM1Fri1VLP8d2m", - "instantiation": "true", - "print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "layer_height": "0.24", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.6 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "5000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.62", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.3", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.62", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.62", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.62", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.62", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.62", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.62", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.62", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "5000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "ehgM1Fri1VLP8d2m", + "instantiation": "true", + "print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "layer_height": "0.24", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.6 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "5000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.62", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.62", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.62", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.62", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.62", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "5000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json index 8d42e7ab86..48b693bb69 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "9oyIahCs4Md5T140", - "instantiation": "true", - "print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "layer_height": "0.24", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.8 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.15", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "100", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "50", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.82", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.4", - "initial_layer_speed": "30", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.82", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.82", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.82", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "0", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.82", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "5", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "5", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.82", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "50", - "support_interface_top_layers": "2", - "support_line_width": "0.82", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "9oyIahCs4Md5T140", + "instantiation": "true", + "print_settings_id": "0.24mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "layer_height": "0.24", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.8 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "50", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.82", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.82", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "0", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "5", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.82", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "50", + "support_interface_top_layers": "2", + "support_line_width": "0.82", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json index e4ca7f3027..33f4c80798 100644 --- a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json index dcb8ee9848..f314b9f3b4 100644 --- a/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm Draft @Anycubic Kobra 2 Pro 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json index a256d2e635..893f1af1e3 100644 --- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json index 5deb25af55..255b805b88 100644 --- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -136,8 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -198,7 +195,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json index 7b19ca18ba..108a9202ab 100644 --- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0.6", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json index 213c1bd438..e4839e61bb 100644 --- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json @@ -1,320 +1,317 @@ -{ - "type": "process", - "name": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "P21QEQqy7DYRu61b", - "instantiation": "true", - "print_settings_id": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", - "layer_height": "0.28", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.4 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "200", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "100", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.5", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "50", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "200", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "50%", - "internal_solid_infill_line_width": "0.42", - "internal_solid_infill_pattern": "zig-zag", - "internal_solid_infill_speed": "200", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.42", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.42", - "outer_wall_speed": "200", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "35", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "1", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.45", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "200", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "0", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.42", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "150", - "support_style": "default", - "support_threshold_angle": "40", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.2", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "1", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "4", - "top_shell_thickness": "1", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.42", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "200", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_bridging": "10", - "wipe_tower_cone_angle": "15", - "wipe_tower_extra_flow": "100%", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_filament": "0", - "wipe_tower_max_purge_speed": "90", - "wipe_tower_no_sparse_layers": "0", - "wipe_tower_rotation_angle": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "P21QEQqy7DYRu61b", + "instantiation": "true", + "print_settings_id": "0.28mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", + "layer_height": "0.28", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "200", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "50", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "50%", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "200", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "35", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "200", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "150", + "support_style": "default", + "support_threshold_angle": "40", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_flow": "100%", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_filament": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json index debbe6e0cf..d22e3ef4f4 100644 --- a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra X 0.4 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json index fa16040b96..46dd14c923 100644 --- a/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json +++ b/resources/profiles/Anycubic/process/0.28mm SuperDraft @Anycubic Kobra 3 0.4 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "0%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json index 974306bcd2..0b3e4b84c8 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic 4MaxPro2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "SnMGK6A5jGzj9KAm", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json index 0fd1a8efeb..d4d629ba75 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Chiron.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "B0Ar6gbysEbWId84", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json index 3ec6a42418..505c1f10b6 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jzWHjr9rKzgX2mbz", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json index 18456d7b99..9193fc6aaa 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Kobra2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "IWsii200XlEuhz3n", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json index bb3ddf9389..0535084c51 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "IB9gk84SYRkMza9u", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json index 4190064c90..33f3822993 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic KobraPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lSoaR17JUQSesbgG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json index e72286dd06..a21298d85c 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic Vyper.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "pXawQlRvbdiJJANG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json index 70bb8ad91e..d1a4fc798a 100644 --- a/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json +++ b/resources/profiles/Anycubic/process/0.30mm Draft @Anycubic i3MegaS.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7PNQ3S9tucM5wFyj", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json index 03ed5252c7..2b4da65c06 100644 --- a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 0.6 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json index 4820247cd2..c76f636af6 100644 --- a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "80", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json index 1c8042a175..02a1b0466f 100644 --- a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "O8vKonzzc8WA5pYY", - "instantiation": "true", - "print_settings_id": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "layer_height": "0.3", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.6 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "5000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.62", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.3", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.62", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.62", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.62", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.62", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "4", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.62", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.62", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "0", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.62", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "O8vKonzzc8WA5pYY", + "instantiation": "true", + "print_settings_id": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "layer_height": "0.3", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.6 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "5000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.62", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.62", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.62", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.62", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "0", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.62", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json index 745f784736..0faa168582 100644 --- a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json index 10b86fe268..34542cfb19 100644 --- a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "0bCUIOLe0kqiwAIZ", - "instantiation": "true", - "print_settings_id": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "layer_height": "0.32", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.8 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.15", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "100", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "50", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.82", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.4", - "initial_layer_speed": "30", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.82", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.82", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.82", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.82", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "5", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "5", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.82", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "50", - "support_interface_top_layers": "2", - "support_line_width": "0.82", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "0bCUIOLe0kqiwAIZ", + "instantiation": "true", + "print_settings_id": "0.32mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "layer_height": "0.32", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.8 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "50", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.82", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.82", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "5", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.82", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "50", + "support_interface_top_layers": "2", + "support_line_width": "0.82", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json index 93ff4febe6..62bce8d582 100644 --- a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "80", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json index 66eb279711..81d042d0e8 100644 --- a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "ii1Ycsf3xI93uZy9", - "instantiation": "true", - "print_settings_id": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "layer_height": "0.36", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.6 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "5000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.62", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.3", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.62", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.62", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.62", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.62", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.62", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.62", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.62", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "5000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "ii1Ycsf3xI93uZy9", + "instantiation": "true", + "print_settings_id": "0.36mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "layer_height": "0.36", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.6 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "5000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.62", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.62", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.62", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.62", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.62", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "5000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json index 1130f63061..b29ffd16ef 100644 --- a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json @@ -13,7 +13,6 @@ ], "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "1", "alternate_extra_wall": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", @@ -128,7 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json index fadd6675d3..0002ce4d9b 100644 --- a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json index 1085832db4..0c68a35165 100644 --- a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "O5xBpGApHGyVlyLw", - "instantiation": "true", - "print_settings_id": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "layer_height": "0.4", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.8 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.15", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "0", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "0", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "100", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "50", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.82", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.4", - "initial_layer_speed": "30", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.82", - "inner_wall_speed": "120", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.82", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.82", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.82", - "outer_wall_speed": "60", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "5", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "5", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "40", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.82", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "50", - "support_interface_top_layers": "2", - "support_line_width": "0.82", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "O5xBpGApHGyVlyLw", + "instantiation": "true", + "print_settings_id": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "layer_height": "0.4", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.8 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "0", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "50", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.82", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "120", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.82", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "60", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "5", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.82", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "50", + "support_interface_top_layers": "2", + "support_line_width": "0.82", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json index 12b7ec1ebf..f890e66ae7 100644 --- a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "80", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json index f11acb406f..7233849603 100644 --- a/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/process/0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "rPalfYXk0fCx0yjv", - "instantiation": "true", - "print_settings_id": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", - "layer_height": "0.42", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.6 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.1", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "5000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "50", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "60", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.62", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.3", - "initial_layer_speed": "40", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.62", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.62", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.62", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "1", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.62", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.62", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "80", - "support_interface_top_layers": "2", - "support_line_width": "0.62", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.62", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "5000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "rPalfYXk0fCx0yjv", + "instantiation": "true", + "print_settings_id": "0.42mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", + "layer_height": "0.42", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.6 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.1", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "5000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "60", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.62", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.62", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.62", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.62", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.62", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "5000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json index 98b75e6a31..4ae39e9b01 100644 --- a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json @@ -146,8 +146,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", @@ -209,7 +207,6 @@ ], "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "40", "smooth_speed_discontinuity_area": "1", "solid_infill_direction": "45", "internal_solid_filament_id": "0", diff --git a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json index 88705184ec..34cd6518ab 100644 --- a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "y0r7Q7PMNRH8ujFF", - "instantiation": "true", - "print_settings_id": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "layer_height": "0.48", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.8 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.15", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "100", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "50", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.82", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.4", - "initial_layer_speed": "30", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.82", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.82", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.82", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "0", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.82", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "5", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "5", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.82", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "50", - "support_interface_top_layers": "2", - "support_line_width": "0.82", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "y0r7Q7PMNRH8ujFF", + "instantiation": "true", + "print_settings_id": "0.48mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "layer_height": "0.48", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.8 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "50", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.82", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.82", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "0", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "5", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.82", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "50", + "support_interface_top_layers": "2", + "support_line_width": "0.82", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json index 84ab9fa483..bdd7741e0b 100644 --- a/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json @@ -1,323 +1,320 @@ -{ - "type": "process", - "name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "rOL0gJh6Y7pDsBnk", - "instantiation": "true", - "print_settings_id": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", - "layer_height": "0.56", - "compatible_printers": [ - "Anycubic Kobra S1 Max 0.8 nozzle" - ], - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "50%", - "alternate_extra_wall": "0", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bottom_solid_infill_flow_ratio": "1", - "bottom_surface_pattern": "monotonic", - "bridge_acceleration": "50%", - "bridge_angle": "0", - "bridge_density": "100%", - "bridge_flow": "1", - "bridge_no_support": "0", - "bridge_speed": "30", - "brim_ears_detection_length": "1", - "brim_ears_max_angle": "125", - "brim_object_gap": "0.15", - "brim_type": "auto_brim", - "brim_width": "5", - "compatible_printers_condition": "", - "counterbore_hole_bridging": "none", - "default_acceleration": "10000", - "default_jerk": "9", - "detect_narrow_internal_solid_infill": "1", - "detect_overhang_wall": "1", - "detect_thin_wall": "1", - "dont_filter_internal_bridges": "disabled", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "elefant_foot_compensation_layers": "1", - "enable_arc_fitting": "0", - "enable_extra_bridge_layer": "disabled", - "enable_overhang_speed": "1", - "enable_prime_tower": "1", - "enable_support": "0", - "enforce_support_layers": "0", - "ensure_vertical_shell_thickness": "ensure_all", - "exclude_object": "1", - "extra_perimeters_on_overhangs": "1", - "extrusion_rate_smoothing_external_perimeter_only": "0", - "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", - "filter_out_gap_fill": "0", - "flush_into_infill": "0", - "flush_into_objects": "0", - "flush_into_support": "1", - "fuzzy_skin": "none", - "fuzzy_skin_first_layer": "0", - "fuzzy_skin_noise_type": "classic", - "fuzzy_skin_octaves": "4", - "fuzzy_skin_persistence": "0.5", - "fuzzy_skin_point_distance": "0.8", - "fuzzy_skin_scale": "1", - "fuzzy_skin_thickness": "0.3", - "gap_fill_target": "topbottom", - "gap_infill_speed": "100", - "gcode_add_line_number": "0", - "gcode_comments": "0", - "gcode_label_objects": "1", - "hole_to_polyhole": "0", - "hole_to_polyhole_threshold": "0.01", - "hole_to_polyhole_twisted": "1", - "independent_support_layer_height": "1", - "infill_anchor": "400%", - "infill_anchor_max": "20", - "infill_combination": "0", - "infill_combination_max_layer_height": "100%", - "infill_direction": "45", - "infill_jerk": "9", - "infill_wall_overlap": "15%", - "initial_layer_acceleration": "500", - "initial_layer_infill_speed": "50", - "initial_layer_jerk": "9", - "initial_layer_line_width": "0.82", - "initial_layer_min_bead_width": "85%", - "initial_layer_print_height": "0.4", - "initial_layer_speed": "30", - "initial_layer_travel_speed": "100%", - "inner_wall_acceleration": "5000", - "inner_wall_jerk": "9", - "inner_wall_line_width": "0.82", - "inner_wall_speed": "150", - "interface_shells": "0", - "interlocking_beam": "0", - "interlocking_beam_layer_count": "2", - "interlocking_beam_width": "0.8", - "interlocking_boundary_avoidance": "2", - "interlocking_depth": "2", - "interlocking_orientation": "22.5", - "internal_bridge_angle": "0", - "internal_bridge_density": "100%", - "internal_bridge_flow": "1", - "internal_bridge_speed": "150%", - "internal_solid_infill_acceleration": "5000", - "internal_solid_infill_line_width": "0.82", - "internal_solid_infill_pattern": "monotonic", - "internal_solid_infill_speed": "150", - "ironing_angle": "-1", - "ironing_flow": "10%", - "ironing_inset": "0", - "ironing_pattern": "zig-zag", - "ironing_spacing": "0.15", - "ironing_speed": "30", - "ironing_type": "no ironing", - "is_infill_first": "0", - "lattice_angle_1": "-45", - "lattice_angle_2": "45", - "line_width": "0.82", - "make_overhang_printable": "0", - "make_overhang_printable_angle": "55", - "make_overhang_printable_hole_size": "0", - "max_bridge_length": "10", - "max_travel_detour_distance": "0", - "max_volumetric_extrusion_rate_slope": "0", - "max_volumetric_extrusion_rate_slope_segment_length": "3", - "min_bead_width": "85%", - "min_feature_size": "25%", - "min_length_factor": "0.5", - "min_skirt_length": "0", - "min_width_top_surface": "300%", - "minimum_sparse_infill_area": "15", - "mmu_segmented_region_interlocking_depth": "0", - "mmu_segmented_region_max_width": "0", - "notes": "", - "only_one_wall_first_layer": "0", - "only_one_wall_top": "0", - "ooze_prevention": "0", - "outer_wall_acceleration": "5000", - "outer_wall_jerk": "9", - "outer_wall_line_width": "0.82", - "outer_wall_speed": "120", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "40", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "5", - "overhang_reverse": "0", - "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "5", - "post_process": [], - "precise_outer_wall": "0", - "precise_z_height": "0", - "preheat_steps": "1", - "preheat_time": "0", - "prime_tower_brim_width": "5", - "prime_tower_extra_rib_length": "0", - "prime_tower_fillet_wall": "1", - "prime_tower_flat_ironing": "0", - "prime_tower_infill_gap": "150%", - "prime_tower_max_speed": "90", - "prime_tower_rib_wall": "1", - "prime_tower_rib_width": "8", - "prime_tower_skip_points": "1", - "prime_tower_width": "30", - "prime_volume": "30", - "print_flow_ratio": "1", - "print_order": "default", - "print_sequence": "by layer", - "raft_contact_distance": "0.1", - "raft_expansion": "1.5", - "raft_first_layer_density": "90%", - "raft_first_layer_expansion": "5", - "raft_layers": "0", - "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", - "resolution": "0.012", - "role_based_wipe_speed": "1", - "rotate_solid_infill_direction": "1", - "scarf_angle_threshold": "155", - "scarf_joint_flow_ratio": "1", - "scarf_joint_speed": "30", - "scarf_overhang_threshold": "40%", - "seam_gap": "10%", - "seam_position": "aligned", - "seam_slope_conditional": "1", - "seam_slope_entire_loop": "0", - "seam_slope_inner_walls": "1", - "seam_slope_min_length": "10", - "seam_slope_start_height": "10%", - "seam_slope_steps": "10", - "seam_slope_type": "none", - "single_extruder_multi_material_priming": "0", - "single_loop_draft_shield": "0", - "skirt_distance": "2", - "skirt_height": "1", - "skirt_loops": "0", - "skirt_speed": "50", - "skirt_start_angle": "-135", - "skirt_type": "combined", - "slice_closing_radius": "0.049", - "slicing_mode": "regular", - "slow_down_layers": "0", - "slowdown_for_curled_perimeters": "0", - "small_area_infill_flow_compensation": "0", - "small_area_infill_flow_compensation_model": [ - "0,0", - "\n0.2,0.4444", - "\n0.4,0.6145", - "\n0.6,0.7059", - "\n0.8,0.7619", - "\n1.5,0.8571", - "\n2,0.8889", - "\n3,0.9231", - "\n5,0.9520", - "\n10,1" - ], - "small_perimeter_speed": "50%", - "small_perimeter_threshold": "0", - "smooth_coefficient": "80", - "smooth_speed_discontinuity_area": "1", - "solid_infill_direction": "45", - "solid_infill_filament": "1", - "sparse_infill_acceleration": "100%", - "sparse_infill_density": "15%", - "sparse_infill_filament": "1", - "sparse_infill_line_width": "0.82", - "sparse_infill_pattern": "grid", - "sparse_infill_speed": "100", - "spiral_finishing_flow_ratio": "0", - "spiral_mode": "0", - "spiral_mode_max_xy_smoothing": "200%", - "spiral_mode_smooth": "0", - "spiral_starting_flow_ratio": "0", - "staggered_inner_seams": "0", - "standby_temperature_delta": "-5", - "support_angle": "0", - "support_base_pattern": "default", - "support_base_pattern_spacing": "2.5", - "support_bottom_interface_spacing": "0.5", - "support_bottom_z_distance": "0.2", - "support_critical_regions_only": "0", - "support_expansion": "0", - "support_filament": "0", - "support_interface_bottom_layers": "2", - "support_interface_filament": "0", - "support_interface_loop_pattern": "0", - "support_interface_not_for_body": "1", - "support_interface_pattern": "auto", - "support_interface_spacing": "0.5", - "support_interface_speed": "50", - "support_interface_top_layers": "2", - "support_line_width": "0.82", - "support_object_first_layer_gap": "0.2", - "support_object_xy_distance": "0.35", - "support_on_build_plate_only": "1", - "support_remove_small_overhang": "1", - "support_speed": "100", - "support_style": "default", - "support_threshold_angle": "30", - "support_threshold_overlap": "50%", - "support_top_z_distance": "0.25", - "support_type": "tree(auto)", - "thick_bridges": "0", - "thick_internal_bridges": "0", - "timelapse_type": "0", - "top_bottom_infill_wall_overlap": "15%", - "top_shell_layers": "3", - "top_shell_thickness": "0.8", - "top_solid_infill_flow_ratio": "1", - "top_surface_acceleration": "2000", - "top_surface_jerk": "9", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonicline", - "top_surface_speed": "150", - "travel_acceleration": "10000", - "travel_jerk": "9", - "travel_speed": "300", - "travel_speed_z": "0", - "tree_support_adaptive_layer_height": "1", - "tree_support_angle_slow": "25", - "tree_support_auto_brim": "1", - "tree_support_branch_angle": "45", - "tree_support_branch_angle_organic": "40", - "tree_support_branch_diameter": "2", - "tree_support_branch_diameter_angle": "5", - "tree_support_branch_diameter_organic": "2", - "tree_support_branch_distance": "5", - "tree_support_branch_distance_organic": "1", - "tree_support_brim_width": "3", - "tree_support_tip_diameter": "0.8", - "tree_support_top_rate": "30%", - "tree_support_wall_count": "0", - "wall_direction": "auto", - "wall_distribution_count": "1", - "wall_filament": "1", - "wall_generator": "classic", - "wall_loops": "2", - "wall_sequence": "inner wall/outer wall", - "wall_transition_angle": "10", - "wall_transition_filter_deviation": "25%", - "wall_transition_length": "100%", - "wipe_before_external_loop": "0", - "wipe_on_loops": "0", - "wipe_speed": "80%", - "wipe_tower_extra_flow": "100%", - "wipe_tower_filament": "0", - "wipe_tower_no_sparse_layers": "0", - "wiping_volumes_extruders": [ - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70", - "70" - ], - "xy_contour_compensation": "0", - "xy_hole_compensation": "0" -} +{ + "type": "process", + "name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "rOL0gJh6Y7pDsBnk", + "instantiation": "true", + "print_settings_id": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", + "layer_height": "0.56", + "compatible_printers": [ + "Anycubic Kobra S1 Max 0.8 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_extra_bridge_layer": "disabled", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "extrusion_rate_smoothing_external_perimeter_only": "0", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_scale": "1", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400%", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_combination_max_layer_height": "100%", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "50", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.82", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "5000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "interface_shells": "0", + "interlocking_beam": "0", + "interlocking_beam_layer_count": "2", + "interlocking_beam_width": "0.8", + "interlocking_boundary_avoidance": "2", + "interlocking_depth": "2", + "interlocking_orientation": "22.5", + "internal_bridge_angle": "0", + "internal_bridge_density": "100%", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_inset": "0", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "is_infill_first": "0", + "lattice_angle_1": "-45", + "lattice_angle_2": "45", + "line_width": "0.82", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_skirt_length": "0", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "0", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "5", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "preheat_steps": "1", + "preheat_time": "0", + "prime_tower_brim_width": "5", + "prime_tower_extra_rib_length": "0", + "prime_tower_fillet_wall": "1", + "prime_tower_flat_ironing": "0", + "prime_tower_infill_gap": "150%", + "prime_tower_max_speed": "90", + "prime_tower_rib_wall": "1", + "prime_tower_rib_width": "8", + "prime_tower_skip_points": "1", + "prime_tower_width": "30", + "prime_volume": "30", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "single_loop_draft_shield": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "skirt_start_angle": "-135", + "skirt_type": "combined", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "0", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "smooth_speed_discontinuity_area": "1", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.82", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "100", + "spiral_finishing_flow_ratio": "0", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "spiral_starting_flow_ratio": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "-5", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "2", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "50", + "support_interface_top_layers": "2", + "support_line_width": "0.82", + "support_object_first_layer_gap": "0.2", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_threshold_overlap": "50%", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "1", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "300", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "45", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "2", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_extra_flow": "100%", + "wipe_tower_filament": "0", + "wipe_tower_no_sparse_layers": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/fdm_process_common.json b/resources/profiles/Anycubic/process/fdm_process_common.json index 868bbc1a2e..f813b8fa7f 100644 --- a/resources/profiles/Anycubic/process/fdm_process_common.json +++ b/resources/profiles/Anycubic/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -78,7 +77,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", diff --git a/resources/profiles/Artillery.json b/resources/profiles/Artillery.json index 66a3a05247..180622cf3a 100644 --- a/resources/profiles/Artillery.json +++ b/resources/profiles/Artillery.json @@ -1,6 +1,6 @@ { "name": "Artillery", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Artillery configurations", "machine_model_list": [ diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json index e5617c4fe6..f168beb458 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json @@ -439,7 +439,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json index a265906570..626b3d23ab 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json @@ -199,7 +199,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json index 85be2e70be..c052fb721f 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json @@ -439,7 +439,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json index db91e5320b..1a0d950914 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json @@ -439,7 +439,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro.json b/resources/profiles/Artillery/machine/Artillery M1 Pro.json index b7e4c1baaa..9b1e63a89d 100644 --- a/resources/profiles/Artillery/machine/Artillery M1 Pro.json +++ b/resources/profiles/Artillery/machine/Artillery M1 Pro.json @@ -10,5 +10,5 @@ "hotend_model": "", "default_bed_type": "Textured PEI Plate", "not_support_bed_type": "Engineering Plate;Textured Cool Plate;Smooth PEI Plate", - "default_materials": "Artillery PLA Basic;Artillery ABS;Artillery ASA;Artillery PA;Artillery PA-CF;Artillery PC;Artillery PET;Artillery PETG Basic;Artillery PETG-CF;Artillery PLA Basic;Artillery PLA Matte;Artillery PLA Silk;Artillery PLA-CF;Artillery PVA;Artillery TPU;Artillery PLA" + "default_materials": "Artillery PLA Basic @Artillery M1 Pro 0.4 nozzle;Artillery ABS @Artillery M1 Pro 0.4 nozzle;Artillery ASA @Artillery M1 Pro 0.4 nozzle;Artillery PA @Artillery M1 Pro 0.4 nozzle;Artillery PA-CF @Artillery M1 Pro 0.4 nozzle;Artillery PC @Artillery M1 Pro 0.4 nozzle;Artillery PET @Artillery M1 Pro 0.4 nozzle;Artillery PETG Basic @Artillery M1 Pro 0.4 nozzle;Artillery PETG-CF @Artillery M1 Pro 0.4 nozzle;Artillery PLA Matte @Artillery M1 Pro 0.4 nozzle;Artillery PLA Silk @Artillery M1 Pro 0.4 nozzle;Artillery PLA-CF @Artillery M1 Pro 0.4 nozzle;Artillery PVA @Artillery M1 Pro 0.4 nozzle;Artillery TPU @Artillery M1 Pro 0.4 nozzle;Artillery PLA Basic @Artillery M1 Pro 0.2 nozzle;Artillery PLA Basic @Artillery M1 Pro 0.6 nozzle;Artillery PLA Basic @Artillery M1 Pro 0.8 nozzle" } diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json index 42e66ff875..98af67eaa7 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json @@ -196,7 +196,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json index 3b12ce6ede..4a961d2113 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json @@ -196,7 +196,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json index b9013a99bf..0e2d82e209 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json @@ -196,7 +196,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json index 4642e015a1..2102a9e857 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json @@ -196,7 +196,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Artillery/machine/fdm_machine_common.json b/resources/profiles/Artillery/machine/fdm_machine_common.json index fcf2e2670b..e5e5341b22 100644 --- a/resources/profiles/Artillery/machine/fdm_machine_common.json +++ b/resources/profiles/Artillery/machine/fdm_machine_common.json @@ -126,7 +126,6 @@ "deretraction_speed": [ "30" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", diff --git a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json index a1175a96f5..a336001bbe 100644 --- a/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm Extra Fine @Artillery M1 Pro 0.4 nozzle.json @@ -137,7 +137,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json index 929fafed81..17279f7852 100644 --- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.2 nozzle.json @@ -133,7 +133,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json index 5a53fa08fd..d2c323a468 100644 --- a/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.08mm High Quality @Artillery M1 Pro 0.4 nozzle.json @@ -133,7 +133,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json index a7647a1f00..2f6d888558 100644 --- a/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm Fine @Artillery M1 Pro 0.4 nozzle.json @@ -135,7 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json index b6f6ae5347..e5f12b7fb4 100644 --- a/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.12mm High Quality @Artillery M1 Pro 0.4 nozzle.json @@ -134,7 +134,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json index 8112e2e609..6490399347 100644 --- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json +++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius Pro.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "lF4fXJjfALsU4vVF", "name": "0.15mm Optimal @Artillery Genius Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "lF4fXJjfALsU4vVF", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json index 9a6cac5bec..7c54deaa45 100644 --- a/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.15mm Optimal @Artillery Genius.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "vo47lgntuWkTLKZb", "name": "0.15mm Optimal @Artillery Genius", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "vo47lgntuWkTLKZb", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.15", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json index 238359be48..b2a81b40fa 100644 --- a/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm High Quality @Artillery M1 Pro 0.4 nozzle.json @@ -135,7 +135,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json index 25d53a28f7..9617aac2c8 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery Hornet.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "XEpSP538KuWRSmGA", "name": "0.16mm Optimal @Artillery Hornet", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "XEpSP538KuWRSmGA", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json index a31ce771ad..adacdcf7fd 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery M1 Pro 0.4 nozzle.json @@ -138,7 +138,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json index 06244e2d4a..355c6078d5 100644 --- a/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.16mm Optimal @Artillery X1.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "3bBfTCC809w3YcXr", "name": "0.16mm Optimal @Artillery X1", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "3bBfTCC809w3YcXr", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json index 99516c7732..9a91eb82a4 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius Pro.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "CsTy51kncEm8X0yJ", "name": "0.20mm Standard @Artillery Genius Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "CsTy51kncEm8X0yJ", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json index 0a36259661..6ef1ed280e 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Genius.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "lzsTJzIBChXesgUG", "name": "0.20mm Standard @Artillery Genius", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "lzsTJzIBChXesgUG", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json index b8eecf1f0f..8c846f2996 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery Hornet.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "i2UAXXKCEaBJmX5R", "name": "0.20mm Standard @Artillery Hornet", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "i2UAXXKCEaBJmX5R", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json index 3baeec4a3b..02851bc832 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery M1 Pro 0.4 nozzle.json @@ -141,7 +141,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json index fcb3b2fea1..a32ba399ff 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X1.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "A2tF591xYPxvYPYn", "name": "0.20mm Standard @Artillery X1", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "A2tF591xYPxvYPYn", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json index 815e9b00c0..bff0dadb1a 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X2.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "Uuco1eKObqt1aypG", "name": "0.20mm Standard @Artillery X2", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "Uuco1eKObqt1aypG", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json index b13efe200b..4a18b18ad0 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Plus 0.4 nozzle.json @@ -126,7 +126,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json index 264a3e5f15..472b2cdb30 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X3Pro 0.4 nozzle.json @@ -126,7 +126,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json index 8bf69da267..0df8955ecd 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Plus 0.4 nozzle.json @@ -126,7 +126,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json index 56f172e941..3462f3c7f3 100644 --- a/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Standard @Artillery X4Pro 0.4 nozzle.json @@ -126,7 +126,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json index 837e4eb6a7..f74639343a 100644 --- a/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.20mm Strength @Artillery M1 Pro 0.4 nozzle.json @@ -136,7 +136,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json index 33893b53df..c01ebe2271 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery Hornet.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "vK3z8VB7eFi5wSEy", "name": "0.24mm Draft @Artillery Hornet", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "vK3z8VB7eFi5wSEy", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json index d175fb9f9d..6c3911a578 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.4 nozzle.json @@ -133,7 +133,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json index 5f3c183e51..d6d80212ce 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.6 nozzle.json @@ -133,7 +133,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json index 38a240bad5..4b2d68d114 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery M1 Pro 0.8 nozzle.json @@ -133,7 +133,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json index 6abc742265..fee39f4d0b 100644 --- a/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json +++ b/resources/profiles/Artillery/process/0.24mm Draft @Artillery X1.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "pMfIpILEXxTfa574", "name": "0.24mm Draft @Artillery X1", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "pMfIpILEXxTfa574", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json index 500c492659..851b63d27d 100644 --- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json +++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius Pro.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "OGYrkEdpgzTfzZLw", "name": "0.25mm Draft @Artillery Genius Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "OGYrkEdpgzTfzZLw", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json index f17fd83593..1489269c39 100644 --- a/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json +++ b/resources/profiles/Artillery/process/0.25mm Draft @Artillery Genius.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "UditC85gTRgxvpSp", "name": "0.25mm Draft @Artillery Genius", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_common", - "adaptive_layer_height": "1", + "from": "system", + "setting_id": "UditC85gTRgxvpSp", + "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json index 6540876295..efee8340aa 100644 --- a/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/process/0.28mm Extra Draft @Artillery M1 Pro 0.4 nozzle.json @@ -136,7 +136,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Artillery/process/fdm_process_common.json b/resources/profiles/Artillery/process/fdm_process_common.json index c74a84adbb..976ff7cf68 100644 --- a/resources/profiles/Artillery/process/fdm_process_common.json +++ b/resources/profiles/Artillery/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -78,7 +77,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index d7ee1e6b6c..3f655ddd22 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "02.01.00.25", + "version": "02.01.00.27", "force_update": "0", "description": "BBL configurations", "machine_model_list": [ diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json index 6ebecc0ecf..33cf76e05b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json @@ -11,5 +11,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "N1", - "default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M" + "default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M;Bambu PLA Basic @BBL A1M 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1.json b/resources/profiles/BBL/machine/Bambu Lab A1.json index efade2a7d2..1ce5f24296 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1.json @@ -9,5 +9,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "N2S", - "default_materials": "Bambu PLA Matte @BBL A1;Bambu PLA Basic @BBL A1;Bambu PLA Silk @BBL A1;Bambu Support For PA/PET @BBL A1;Bambu ABS @BBL A1;Bambu TPU 95A @BBL A1;Bambu PLA Tough @BBL A1;Generic PLA @BBL A1;Generic PLA High Speed @BBL A1;Generic PETG @BBL A1;Generic PVA @BBL A1;Bambu PETG HF @BBL A1" + "default_materials": "Bambu PLA Matte @BBL A1;Bambu PLA Basic @BBL A1;Bambu PLA Silk @BBL A1;Bambu Support For PA/PET @BBL A1;Bambu ABS @BBL A1;Bambu TPU 95A @BBL A1;Bambu PLA Tough @BBL A1;Generic PLA @BBL A1;Generic PLA High Speed @BBL A1;Generic PETG @BBL A1;Generic PVA @BBL A1;Bambu PETG HF @BBL A1;Bambu PLA Basic @BBL A1 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L.json b/resources/profiles/BBL/machine/Bambu Lab A2L.json index b9ad344d22..62a9a0fddf 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A2L.json +++ b/resources/profiles/BBL/machine/Bambu Lab A2L.json @@ -13,5 +13,5 @@ "model_id": "N9", "not_support_bed_type": "Cool Plate", "use_double_extruder_default_texture": "true", - "default_materials": "Bambu PLA Matte @BBL A2L;Bambu PLA Basic @BBL A2L;Bambu PLA Silk @BBL A2L;Bambu Support For PLA/PETG @BBL A2L;Bambu TPU 95A @BBL A2L;Bambu PLA Tough @BBL A2L;Generic PLA @BBL A2L;Generic PLA High Speed @BBL A2L;Generic PETG @BBL A2L;Generic PVA @BBL A2L;Bambu PETG HF @BBL A2L" + "default_materials": "Bambu PLA Matte @BBL A2L 0.4 nozzle;Bambu PLA Basic @BBL A2L 0.4 nozzle;Bambu PLA Silk @BBL A2L 0.4 nozzle;Bambu Support For PLA/PETG @BBL A2L;Bambu TPU 95A @BBL A2L;Bambu PLA Tough @BBL A2L;Generic PLA @BBL A2L;Generic PLA High Speed @BBL A2L;Generic PETG @BBL A2L;Generic PVA @BBL A2L;Bambu PETG HF @BBL A2L;Bambu PLA Basic @BBL A2L 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C.json b/resources/profiles/BBL/machine/Bambu Lab H2C.json index 92645a5933..b9734a34c5 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2C.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2C.json @@ -12,5 +12,5 @@ "machine_tech": "FFF", "model_id": "O1C2", "not_support_bed_type": "Cool Plate;Smooth PEI Plate / High Temp Plate", - "default_materials": "Bambu PLA Basic @BBL H2C;Bambu PLA-CF @BBL H2C;Bambu PETG Basic @BBL H2C;Bambu ABS @BBL H2C;Bambu PETG HF @BBL H2C;Bambu PLA Silk @BBL H2C;Bambu PLA Matte @BBL H2C;Bambu PC @BBL H2C;Bambu PA-CF @BBL H2C;Bambu PLA Pure @BBL H2C" + "default_materials": "Bambu PLA Basic @BBL H2C;Bambu PLA-CF @BBL H2C;Bambu PETG Basic @BBL H2C;Bambu ABS @BBL H2C;Bambu PETG HF @BBL H2C;Bambu PLA Silk @BBL H2C;Bambu PLA Matte @BBL H2C;Bambu PC @BBL H2C;Bambu PA-CF @BBL H2C;Bambu PLA Pure @BBL H2C;Bambu PLA Basic @BBL H2C 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json index 8fd12972e7..d2be50fe67 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json @@ -11,5 +11,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "O1E", - "default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP;Bambu PETG Basic @BBL H2DP;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP;Bambu PA-CF @BBL H2DP;Bambu PLA Pure @BBL H2DP" + "default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP 0.4 nozzle;Bambu PETG Basic @BBL H2DP 0.4 nozzle;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP 0.4 nozzle;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP 0.4 nozzle;Bambu PA-CF @BBL H2DP;Bambu PLA Pure @BBL H2DP;Bambu PLA Basic @BBL H2DP 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D.json b/resources/profiles/BBL/machine/Bambu Lab H2D.json index 9a277c4b7e..a264365c94 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D.json @@ -12,5 +12,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "O1D", - "default_materials": "Bambu PLA Basic @BBL H2D;Bambu PLA-CF @BBL H2D;Bambu PETG Basic @BBL H2D;Bambu ABS @BBL H2D;Bambu PETG HF @BBL H2D;Bambu PLA Silk @BBL H2D;Bambu PLA Matte @BBL H2D;Bambu PC @BBL H2D;Bambu PA-CF @BBL H2D;Bambu PLA Pure @BBL H2D" + "default_materials": "Bambu PLA Basic @BBL H2D;Bambu PLA-CF @BBL H2D 0.4 nozzle;Bambu PETG Basic @BBL H2D 0.4 nozzle;Bambu ABS @BBL H2D;Bambu PETG HF @BBL H2D 0.4 nozzle;Bambu PLA Silk @BBL H2D;Bambu PLA Matte @BBL H2D;Bambu PC @BBL H2D 0.4 nozzle;Bambu PA-CF @BBL H2D;Bambu PLA Pure @BBL H2D;Bambu PLA Basic @BBL H2D 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S.json b/resources/profiles/BBL/machine/Bambu Lab H2S.json index 11c2cde471..2ead7abc09 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2S.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2S.json @@ -14,5 +14,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "O1S", - "default_materials": "Bambu PLA Basic @BBL H2S;Bambu PLA Matte @BBL H2S;Bambu PLA Tough @BBL H2S;Bambu PLA Marble @BBL H2S;Bambu PLA Metal @BBL H2S;Bambu PLA Silk @BBL H2S;Bambu TPU 95A HF @BBL H2S;Bambu PETG Basic @BBL H2S;Bambu PLA Pure @BBL H2S" + "default_materials": "Bambu PLA Basic @BBL H2S;Bambu PLA Matte @BBL H2S;Bambu PLA Tough @BBL H2S;Bambu PLA Marble @BBL H2S;Bambu PLA Metal @BBL H2S;Bambu PLA Silk @BBL H2S;Bambu TPU 95A HF @BBL H2S;Bambu PETG Basic @BBL H2S;Bambu PLA Pure @BBL H2S;Bambu PLA Basic @BBL H2S 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P.json b/resources/profiles/BBL/machine/Bambu Lab P1P.json index c5062699d6..7365599b1c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P.json @@ -9,5 +9,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "C11", - "default_materials": "Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu PLA-CF @BBL P1P;Bambu PETG-CF @BBL P1P;Bambu ABS @BBL P1P;Bambu PLA Silk @BBL P1P;Bambu PAHT-CF @BBL P1P;Bambu Support For PA/PET @BBL P1P;Bambu Support For PLA @BBL P1P;Generic PLA @BBL P1P;Generic PLA High Speed @BBL P1P;Generic PETG @BBL P1P;Bambu PETG HF @BBL X1C" + "default_materials": "Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu PLA-CF @BBL P1P;Bambu PETG-CF @BBL P1P;Bambu ABS @BBL P1P;Bambu PLA Silk @BBL P1P;Bambu PAHT-CF @BBL P1P;Bambu Support For PA/PET @BBL P1P;Bambu Support For PLA @BBL P1P;Generic PLA @BBL P1P;Generic PLA High Speed @BBL P1P;Generic PETG @BBL P1P;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL P1P 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S.json b/resources/profiles/BBL/machine/Bambu Lab P1S.json index f5e81affe6..76d1a92839 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S.json @@ -9,5 +9,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "C12", - "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C" + "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S.json b/resources/profiles/BBL/machine/Bambu Lab P2S.json index 19939adeff..869cb56016 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P2S.json +++ b/resources/profiles/BBL/machine/Bambu Lab P2S.json @@ -12,5 +12,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "N7", - "default_materials": "Bambu PLA Matte @BBL P2S;Bambu PLA Basic @BBL P2S;Bambu PLA Silk @BBL P2S;Bambu PLA Marble @BBL P2S;Bambu PLA Sparkle @BBL P2S;Generic PLA @BBL P2S;Bambu TPU 95A @BBL P2S;Bambu ABS @BBL P2S;Bambu PC @BBL P2S 0.4 nozzle" + "default_materials": "Bambu PLA Matte @BBL P2S;Bambu PLA Basic @BBL P2S;Bambu PLA Silk @BBL P2S;Bambu PLA Marble @BBL P2S;Bambu PLA Sparkle @BBL P2S;Generic PLA @BBL P2S;Bambu TPU 95A @BBL P2S;Bambu ABS @BBL P2S;Bambu PC @BBL P2S 0.4 nozzle;Bambu PLA Basic @BBL P2S 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json index 6a504195c7..a3a89c14de 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json @@ -9,5 +9,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "BL-P001", - "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu TPU 95A @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Bambu PETG HF @BBL X1C" + "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu TPU 95A @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1.json b/resources/profiles/BBL/machine/Bambu Lab X1.json index 843ddcf3a7..23a90ded95 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1.json @@ -9,5 +9,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "BL-P002", - "default_materials": "Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C" + "default_materials": "Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E.json b/resources/profiles/BBL/machine/Bambu Lab X1E.json index d0c5f3660c..0c4d6faf76 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E.json @@ -9,5 +9,5 @@ "family": "BBL-3DP", "machine_tech": "FFF", "model_id": "C13", - "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1E;Bambu ASA @BBL X1E;Bambu PC @BBL X1E;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PPA-CF @BBL X1E;Generic PPS @BBL X1E;Generic PPS-CF @BBL X1E;Bambu PETG HF @BBL X1C" + "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1E;Bambu ASA @BBL X1E;Bambu PC @BBL X1E;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PPA-CF @BBL X1E;Generic PPS @BBL X1E;Generic PPS-CF @BBL X1E;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D.json b/resources/profiles/BBL/machine/Bambu Lab X2D.json index df2ca2c45b..95e65f3b1e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X2D.json +++ b/resources/profiles/BBL/machine/Bambu Lab X2D.json @@ -14,5 +14,5 @@ "machine_tech": "FFF", "model_id": "N6", "not_support_bed_type": "Cool Plate", - "default_materials": "Bambu PLA Matte @BBL X2D;Bambu PLA Matte @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D;Bambu PLA Basic @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D;Bambu TPU 95A @BBL X2D 0.4 nozzle;Generic TPU @BBL X2D;Generic TPU @BBL X2D 0.4 nozzle;Bambu PETG Basic @BBL X2D;Bambu PETG Basic @BBL X2D 0.4 nozzle;Bambu PETG HF @BBL X2D;Bambu PETG HF @BBL X2D 0.4 nozzle;Bambu ABS @BBL X2D;Bambu ABS @BBL X2D 0.4 nozzle;Bambu PC @BBL X2D;Bambu PC @BBL X2D 0.4 nozzle" + "default_materials": "Bambu PLA Matte @BBL X2D;Bambu PLA Matte @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D;Bambu PLA Basic @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D;Bambu TPU 95A @BBL X2D 0.4 nozzle;Generic TPU @BBL X2D;Generic TPU @BBL X2D 0.4 nozzle;Bambu PETG Basic @BBL X2D;Bambu PETG Basic @BBL X2D 0.4 nozzle;Bambu PETG HF @BBL X2D;Bambu PETG HF @BBL X2D 0.4 nozzle;Bambu ABS @BBL X2D;Bambu ABS @BBL X2D 0.4 nozzle;Bambu PC @BBL X2D;Bambu PC @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D 0.2 nozzle" } diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json index f793f3bc1d..b10072a284 100644 --- a/resources/profiles/BBL/machine/fdm_machine_common.json +++ b/resources/profiles/BBL/machine/fdm_machine_common.json @@ -137,7 +137,6 @@ ], "scan_first_layer": "0", "enable_power_loss_recovery": "printer_configuration", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_cooling_filter": "0", diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json index 7a2803376a..7eae54fd49 100644 --- a/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json index 49cc379d96..9ccca5434e 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json index 946d06033d..80edd032c6 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -92,7 +88,6 @@ "Direct Drive High Flow" ], "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json index 904a4c36b3..b1bfc9052a 100644 --- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json index fb11c1a4bf..0c9ed0c2d3 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json index 4894472048..60ba1abfa7 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -90,7 +86,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "450", "450" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json index 18c97c02a0..c87e2d5d0e 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json @@ -33,7 +33,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "travel_acceleration": [ "8000" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json index 1c1c67efdd..1d1eb841da 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json @@ -48,7 +48,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "150" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json index a7b0dd5cdf..521f97aad2 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json @@ -124,10 +124,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -144,7 +140,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json index 74424205a8..d30d85cdc6 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json @@ -120,10 +120,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -140,7 +136,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json index 6dffdd807a..1d72dc8bc2 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json index 6449810abc..ab50f11c4d 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json index ef8582cf08..fba6cdf18b 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json @@ -80,10 +80,6 @@ "20", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -94,7 +90,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "100", diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json index 33bcdcb417..89bca9df5b 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json @@ -79,10 +79,6 @@ "20", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "150", "150" ], - "smooth_coefficient": "1", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json index 2d4a5a4aa9..9ecb07315c 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -92,7 +88,6 @@ "Direct Drive High Flow" ], "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json index d43fa0b542..46391c740a 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -95,7 +91,6 @@ "150", "150" ], - "smooth_coefficient": "150", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json index 1ac71a0e27..748fa47e60 100644 --- a/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json index e63c318451..de2043ca5f 100644 --- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json index 9e79020dde..88b2bc08df 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json index dda11fcea8..5dcdb588f1 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -92,7 +88,6 @@ "Direct Drive High Flow" ], "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json index 3eeeae65e0..c122c78e09 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json @@ -30,9 +30,6 @@ "overhang_4_4_speed": [ "35" ], - "overhang_totally_speed": [ - "25" - ], "prime_tower_brim_width": "-1", "slowdown_end_acc": [ "1000" @@ -40,7 +37,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "support_line_width": "0.4", "travel_acceleration": [ "8000" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json index 594822c2fa..698c0ba106 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json @@ -79,10 +79,6 @@ "100", "100" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "print_extruder_id": [ @@ -117,7 +113,6 @@ "80", "80" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json index 9d65e320a6..8c7c9415a1 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json index 8d545a01f4..51fcbc71d4 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json @@ -80,10 +80,6 @@ "20", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -92,7 +88,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json index e1078c5844..5145c45b42 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json index e1fbd88049..3fd94d41ca 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json @@ -27,7 +27,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json index 62b5351a18..f35eccf500 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json @@ -123,10 +123,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -143,7 +139,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json index e1b48ac5b8..f7a7639857 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json @@ -79,10 +79,6 @@ "20", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -93,7 +89,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json index 1a99892c5f..83afb88fd8 100644 --- a/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json index ee9683d868..96047bf831 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json index 24ff340202..1758049a79 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -90,7 +86,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "430", "430" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json index dd64b185c9..9b7a3a9504 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json @@ -48,7 +48,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "180" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json index eadb61d48f..99aa118b84 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json @@ -120,10 +120,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -140,7 +136,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json index ea4c5fc5a0..6cdae36ed1 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json index d1464e4305..6f86d4824b 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json @@ -79,10 +79,6 @@ "20", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "180", "180" ], - "smooth_coefficient": "1", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json index d7784db216..94f8634116 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -95,7 +91,6 @@ "180", "180" ], - "smooth_coefficient": "150", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json index d3640ed715..b0186048dd 100644 --- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json index 218a787534..437f17bf44 100644 --- a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json index 54ed08993e..8e36589ccd 100644 --- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json index 9b6218b86c..5c75e20bdd 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json @@ -48,7 +48,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "200" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json index 890ce852c5..903eb3749d 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json @@ -120,10 +120,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -140,7 +136,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json index 38b6bb521b..b7b7d2bd55 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json index e8c99baf95..65e4674832 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -99,7 +95,6 @@ "200", "200" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json index 4906acb367..0e281022a3 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -95,7 +91,6 @@ "200", "200" ], - "smooth_coefficient": "150", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json index d9b1741a52..4f536ba2cf 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json index 6d73a50989..867d939dce 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -90,7 +86,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "330", "330" diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json index cfe8b823aa..b3eef2ee33 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json @@ -33,7 +33,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json index 34db04a866..ec829b7ee4 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -129,7 +125,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json index 3936f388e6..ba295d7a52 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "270", "270" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json index 2a76dd472d..8995eeb48f 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json @@ -21,7 +21,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json index afb20240c5..c0061a0b41 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json @@ -124,10 +124,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -144,7 +140,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json index 1357450ea1..74dccd56d7 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "270", "270" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json index f763af69b5..9598dfcfea 100644 --- a/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json index 2d4396b050..b865adf071 100644 --- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json index 86e4fdd103..d7c3d6468d 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json @@ -53,7 +53,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "sparse_infill_density": "25%", "sparse_infill_speed": [ "200" diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json index 6c26a52279..0e6064052d 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json @@ -119,10 +119,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -139,7 +135,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json index fc29792372..d6170c2c44 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "200", "200" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "slowdown_start_height": [ "0", diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json index b26ff6f9e6..9eee3748dc 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json @@ -33,7 +33,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json index ea157f757c..d807f16450 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "print_extruder_id": [ @@ -92,7 +88,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "350", "600" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json index c3fec1fa83..2d96c4fc4d 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json index 2c4de0d7bc..b1696e1fa5 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -92,7 +88,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "270", "600" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json index 57646a32c1..c5528cf17a 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "270", "270" diff --git a/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json b/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json index d41f51faf1..cee984c300 100644 --- a/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json +++ b/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", @@ -125,7 +121,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json index 9008bd79e2..932890cad3 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json index dcb64e1ec5..3cb1ff5984 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -90,7 +86,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_density": "25%", "skeleton_infill_density": "25%", "skin_infill_density": "25%", diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json index 74c9994732..fe0d6589ac 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json @@ -21,7 +21,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json index 83900ad084..d776a52d25 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json @@ -21,7 +21,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json index 0cdc5bb25e..373149f7ee 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json @@ -124,10 +124,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -144,7 +140,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json index 098cce840c..f9b4a1ab8d 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json @@ -124,10 +124,6 @@ "50", "50" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -144,7 +140,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json index 7b7f633040..6ec3215684 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json @@ -80,10 +80,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "270", "270" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json index 4a303b27d9..1a925b86c3 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json @@ -80,10 +80,6 @@ "50", "50" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "270", "270" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json index 6d716dfdbf..f59e06d60b 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json index 17cd1d829c..5a32b21d55 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -90,7 +86,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "230", "230" diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json index 963d8945ad..dc80b360fa 100644 --- a/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json index 5cae9a0bf0..a8eb1b516b 100644 --- a/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json index f99e4ec24f..920c0743fd 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json @@ -33,7 +33,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json index 1807668e08..11717ad604 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json @@ -118,10 +118,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -138,7 +134,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json index a6dae0a6dd..b0655b0f55 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json @@ -79,10 +79,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -97,7 +93,6 @@ "270", "270" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json index 2cf71d9ad9..7b3f2d2293 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json index 1a639b0ad3..9f3bd73c59 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json index ca4b6a55c1..92fadb9054 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json index d3560f7224..255d2a806a 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json @@ -78,10 +78,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -90,7 +86,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "200", "200" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json index 4fa0523bb4..800dad889c 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json @@ -30,7 +30,6 @@ "slowdown_start_speed": [ "500" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json index c3f1962e55..1e4493c397 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "500" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "print_extruder_id": [ @@ -141,7 +137,6 @@ "80", "80" ], - "smooth_coefficient": "4", "travel_speed": [ "1000", "1000" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json index b8993d012d..66a2c3a007 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json index 9f4c86e17a..b10573aa5e 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json @@ -81,10 +81,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -93,7 +89,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "270", "600" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json index a960492fdc..f4f72db014 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json index a76b7f9bd5..7b04010bf2 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json index fb8c7de72b..4394c363d0 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json index ab0e52733c..99b2f43361 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -94,7 +90,6 @@ "sparse_infill_density": "25%", "skeleton_infill_density": "25%", "skin_infill_density": "25%", - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json index 20b865e2cd..1e60033ace 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json @@ -21,7 +21,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json index c7c44a1b1f..cd60ebe8af 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json @@ -124,10 +124,6 @@ "50", "50" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -144,7 +140,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%" diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json index ffa69df36b..f0049b42e3 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json @@ -80,10 +80,6 @@ "50", "50" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_brim_width": "-1", "prime_tower_width": "60", "print_extruder_id": [ @@ -98,7 +94,6 @@ "270", "270" ], - "smooth_coefficient": "4", "slowdown_start_height": [ "0", "0" diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json index 84d042d8b0..8100421664 100644 --- a/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json index b8f052e179..304b99974a 100644 --- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json index 6a34e7b93b..a36c99978a 100644 --- a/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json index bdae37307f..9103a177a7 100644 --- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json index c0af67dba9..74c452d588 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json @@ -21,7 +21,6 @@ "slowdown_end_height": [ "225" ], - "smooth_coefficient": "4", "travel_acceleration": [ "8000" ], diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json index 2c4d4b26e5..9f8035e903 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "500" ], - "overhang_totally_speed": [ - "10", - "10" - ], "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "print_extruder_id": [ @@ -141,7 +137,6 @@ "80", "80" ], - "smooth_coefficient": "4", "travel_speed": [ "1000", "1000" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json index 74ab7c414e..b6596c47d5 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json index e1fe009797..eee70ed075 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json @@ -81,10 +81,6 @@ "50", "50" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -93,7 +89,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "270", "600" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json index ce865a363b..dabf9e5308 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json index 8777997db3..f15e9e7a91 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json index 54d9bb8666..e4a31d3d12 100644 --- a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json index f136450576..ebc423cf93 100644 --- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json index 31ede55d0c..cf788c3832 100644 --- a/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json index 62122ff25d..12de9a8108 100644 --- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json index e98fa844d7..1b4d5ee0c3 100644 --- a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json index 255af5a125..2745935c6c 100644 --- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json @@ -79,10 +79,6 @@ "120", "120" ], - "overhang_totally_speed": [ - "10", - "10" - ], "print_extruder_id": [ "1", "1" @@ -91,7 +87,6 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "smooth_coefficient": "150", "sparse_infill_speed": [ "100", "100" diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json index 6f715882cc..5af292b424 100644 --- a/resources/profiles/BBL/process/fdm_process_common.json +++ b/resources/profiles/BBL/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "bottom_shell_layers": "3", "bottom_color_penetration_layers": "3", "bottom_shell_thickness": "0", @@ -47,7 +46,6 @@ "40" ], "interface_shells": "0", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": [ "40" @@ -77,9 +75,6 @@ "outer_wall_speed": [ "120" ], - "overhang_totally_speed": [ - "10" - ], "override_filament_scarf_seam_setting": "0", "pre_start_fan_time": [ "0" @@ -105,7 +100,6 @@ "skirt_distance": "2", "skirt_height": "1", "skirt_loops": "0", - "smooth_coefficient": "80", "sparse_infill_density": "15%", "skeleton_infill_density": "15%", "skin_infill_density": "15%", diff --git a/resources/profiles/BBL/process/fdm_process_dual_common.json b/resources/profiles/BBL/process/fdm_process_dual_common.json index 95a58bfb78..b247f2ffb1 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_common.json +++ b/resources/profiles/BBL/process/fdm_process_dual_common.json @@ -113,12 +113,6 @@ "10", "10" ], - "overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], "print_extruder_id": [ "1", "1", @@ -180,7 +174,6 @@ "0", "0" ], - "smooth_coefficient": "4", "sparse_infill_acceleration": [ "100%", "100%", diff --git a/resources/profiles/BIQU.json b/resources/profiles/BIQU.json index 6c28578e82..2dd4115290 100644 --- a/resources/profiles/BIQU.json +++ b/resources/profiles/BIQU.json @@ -1,6 +1,6 @@ { "name": "BIQU", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "BIQU configurations", "machine_model_list": [ diff --git a/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json b/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json index cc0e00d7e0..93ad734a32 100644 --- a/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json +++ b/resources/profiles/BIQU/machine/BIQU Hurakan (0.4 nozzle).json @@ -134,7 +134,6 @@ "40" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE\n", diff --git a/resources/profiles/BIQU/machine/fdm_biqu_common.json b/resources/profiles/BIQU/machine/fdm_biqu_common.json index 45c676c60b..8adf13d5f9 100644 --- a/resources/profiles/BIQU/machine/fdm_biqu_common.json +++ b/resources/profiles/BIQU/machine/fdm_biqu_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/BIQU/machine/fdm_klipper_common.json b/resources/profiles/BIQU/machine/fdm_klipper_common.json index ad76cd3c5b..5ec9283827 100644 --- a/resources/profiles/BIQU/machine/fdm_klipper_common.json +++ b/resources/profiles/BIQU/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "40" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE\n", diff --git a/resources/profiles/BIQU/machine/fdm_machine_common.json b/resources/profiles/BIQU/machine/fdm_machine_common.json index 22ba444121..5355d94467 100644 --- a/resources/profiles/BIQU/machine/fdm_machine_common.json +++ b/resources/profiles/BIQU/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" diff --git a/resources/profiles/BIQU/process/fdm_process_biqu_common.json b/resources/profiles/BIQU/process/fdm_process_biqu_common.json index 901b90ae08..b2aebda8a5 100644 --- a/resources/profiles/BIQU/process/fdm_process_biqu_common.json +++ b/resources/profiles/BIQU/process/fdm_process_biqu_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/BIQU/process/fdm_process_common.json b/resources/profiles/BIQU/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/BIQU/process/fdm_process_common.json +++ b/resources/profiles/BIQU/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json index a5e106f0ed..fcd275537c 100644 --- a/resources/profiles/BIQU/process/fdm_process_hurakan_common.json +++ b/resources/profiles/BIQU/process/fdm_process_hurakan_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_biqu_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Blocks.json b/resources/profiles/Blocks.json index f8243c252d..f24bcb81da 100644 --- a/resources/profiles/Blocks.json +++ b/resources/profiles/Blocks.json @@ -1,6 +1,6 @@ { "name": "Blocks", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Blocks configurations", "machine_model_list": [ diff --git a/resources/profiles/Blocks/machine/fdm_klipper_common.json b/resources/profiles/Blocks/machine/fdm_klipper_common.json index 1756ac178a..5372b42547 100644 --- a/resources/profiles/Blocks/machine/fdm_klipper_common.json +++ b/resources/profiles/Blocks/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "35" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "CHANGE_FILAMENT", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Blocks/machine/fdm_machine_common.json b/resources/profiles/Blocks/machine/fdm_machine_common.json index 27cde99c12..e250ba2e3c 100644 --- a/resources/profiles/Blocks/machine/fdm_machine_common.json +++ b/resources/profiles/Blocks/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json index 86f9cb5adb..315256dcab 100644 --- a/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json index ae773410b3..ca6facb720 100644 --- a/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json index 7c02d847bc..b80b051a71 100644 --- a/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json index 32beb61fe9..5c88e00c2a 100644 --- a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json @@ -41,7 +41,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json index d9d6895c3d..edb1bfcc2d 100644 --- a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json index 6744554909..d2f853b638 100644 --- a/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json index 0b3b324664..dd6b60d371 100644 --- a/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json @@ -38,7 +38,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json index 704d355221..9d909c1dd4 100644 --- a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json index 05c4c06e22..60c6eae19e 100644 --- a/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json @@ -38,7 +38,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json index 18d38c7c34..f28a975208 100644 --- a/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json index b4359ae990..7b94febc1c 100644 --- a/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json @@ -38,7 +38,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json index 6e286f3309..d49633e89d 100644 --- a/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json @@ -38,7 +38,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json index e0d5a486de..a0e9121ceb 100644 --- a/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json @@ -37,7 +37,6 @@ "support_speed": "300", "detect_overhang_wall": "1", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", diff --git a/resources/profiles/Blocks/process/fdm_process_blocks_common.json b/resources/profiles/Blocks/process/fdm_process_blocks_common.json index 2e9e81b262..4eac1c83d7 100644 --- a/resources/profiles/Blocks/process/fdm_process_blocks_common.json +++ b/resources/profiles/Blocks/process/fdm_process_blocks_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json index 51ecf6c306..ef7dcc12bf 100644 --- a/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json +++ b/resources/profiles/Blocks/process/fdm_process_common 0.6 nozzle.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_blocks_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "brim_width": "5", diff --git a/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json index 10089234ee..6a32e4abb4 100644 --- a/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json +++ b/resources/profiles/Blocks/process/fdm_process_common 0.8 nozzle.json @@ -18,7 +18,6 @@ "internal_solid_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "brim_width": "5", diff --git a/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json index c1e7f74673..a09804b95d 100644 --- a/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json +++ b/resources/profiles/Blocks/process/fdm_process_common 1.0 nozzle.json @@ -14,7 +14,6 @@ "internal_solid_infill_line_width": "1.02", "support_line_width": "1.02", "top_surface_line_width": "1.02", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "brim_width": "5", diff --git a/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json b/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json index 292d413e96..4764a600fd 100644 --- a/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json +++ b/resources/profiles/Blocks/process/fdm_process_common 1.2 nozzle.json @@ -14,7 +14,6 @@ "internal_solid_infill_line_width": "1.22", "support_line_width": "1.22", "top_surface_line_width": "1.22", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "brim_width": "5", diff --git a/resources/profiles/Blocks/process/fdm_process_common.json b/resources/profiles/Blocks/process/fdm_process_common.json index e6614cb911..2caa139d1f 100644 --- a/resources/profiles/Blocks/process/fdm_process_common.json +++ b/resources/profiles/Blocks/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/CONSTRUCT3D.json b/resources/profiles/CONSTRUCT3D.json index efc7c78972..55845903b0 100644 --- a/resources/profiles/CONSTRUCT3D.json +++ b/resources/profiles/CONSTRUCT3D.json @@ -1,6 +1,6 @@ { "name": "CONSTRUCT3D", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Construct3D configurations", "machine_model_list": [ diff --git a/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json b/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json index 7459504984..ff5aca073b 100644 --- a/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json +++ b/resources/profiles/CONSTRUCT3D/machine/fdm_machine_common.json @@ -22,7 +22,6 @@ "printhost_port": "", "printhost_ssl_ignore_revoke": "0", "printhost_user": "", - "silent_mode": "0", "machine_max_acceleration_e": [ "8000" ], @@ -121,7 +120,6 @@ "thumbnails": [ "160x160" ], - "z_lift_type": "Auto Lift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", diff --git a/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json b/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json index baaf57a50b..1378aca57f 100644 --- a/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json +++ b/resources/profiles/CONSTRUCT3D/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -81,7 +80,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Chuanying.json b/resources/profiles/Chuanying.json index 9ce88c574c..5434e13bb8 100644 --- a/resources/profiles/Chuanying.json +++ b/resources/profiles/Chuanying.json @@ -1,7 +1,7 @@ { "name": "Chuanying", "url": "", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Chuanying configurations", "machine_model_list": [ diff --git a/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json index f5cc9c8419..3196464cc2 100644 --- a/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic ASA @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Chuanying", - "inherits": "fdm_filament_asa", "renamed_from": "Chuanying Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "39OBrSE3RugtTPPR", "filament_id": "OFLPAxz3", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "0" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "2" diff --git a/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json b/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json index 4d8edd7298..25910a1f55 100644 --- a/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic HIPS @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HIPS @Chuanying", - "inherits": "Generic ABS @Chuanying", "renamed_from": "Chuanying Generic HIPS", + "inherits": "Generic ABS @Chuanying", "from": "system", "setting_id": "TV3UktlnP0aTLsOZ", "filament_id": "OFsFon5l", @@ -96,9 +96,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "HIPS" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json index 8b0529814e..c209ab1022 100644 --- a/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying.json @@ -1,15 +1,12 @@ { "type": "filament", "name": "Generic HS PLA @Chuanying", - "inherits": "fdm_filament_pla", "renamed_from": "Chuanying Generic HS PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "uw7SQpFnhFiO8i1N", "filament_id": "OFvxghTE", "instantiation": "true", - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": [ "0" ], @@ -84,9 +81,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -159,9 +153,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json index 85d42dad84..e8c812c7d5 100644 --- a/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic PETG-CF10 @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF10 @Chuanying", - "inherits": "fdm_filament_pet", "renamed_from": "Chuanying Generic PETG-CF10", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "Pr70SnbXDjOF9EvU", "filament_id": "OFO5djrM", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "1" diff --git a/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json index c76c4de977..46be8ddf90 100644 --- a/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic PLA-CF10 @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF10 @Chuanying", - "inherits": "fdm_filament_pla", "renamed_from": "Chuanying Generic PLA-CF10", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "I4FjaXNkWl8Mr4ie", "filament_id": "OFX2zcrM", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": [ "0" ], @@ -87,9 +84,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -162,9 +156,6 @@ "filament_type": [ "PLA-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json index a38af95d65..0c6abd3c0f 100644 --- a/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic PVA @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Chuanying", - "inherits": "Generic PLA @Chuanying", "renamed_from": "Chuanying Generic PVA", + "inherits": "Generic PLA @Chuanying", "from": "system", "setting_id": "UTutnObeQqlZxe0B", "filament_id": "OFDvXujf", @@ -96,9 +96,6 @@ "filament_is_support": [ "1" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "PVA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json b/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json index 9bea6c388d..b9a325ce8c 100644 --- a/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic TPU @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Chuanying", - "inherits": "fdm_filament_tpu", "renamed_from": "Chuanying Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "gYsq1HqkgyfmVpvz", "filament_id": "OFgbpcy9", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "1" diff --git a/resources/profiles/Chuanying/machine/Chuanying X1.json b/resources/profiles/Chuanying/machine/Chuanying X1.json index 9e9c3f015d..c62df68589 100644 --- a/resources/profiles/Chuanying/machine/Chuanying X1.json +++ b/resources/profiles/Chuanying/machine/Chuanying X1.json @@ -8,5 +8,5 @@ "bed_model": "chuanying_x1_buildplate_model.STL", "bed_texture": "chuanying_x1_buildplate_texture.svg", "hotend_model": "chuanying_x1_hotend.STL", - "default_materials": "Generic PETG @Chuanying;Generic PLA @Chuanying" + "default_materials": "Generic PETG @Chuanying;Generic PLA @Chuanying;Generic PLA @Chuanying X1 0.25 Nozzle" } diff --git a/resources/profiles/Chuanying/machine/fdm_chuanying_common.json b/resources/profiles/Chuanying/machine/fdm_chuanying_common.json index 41d7339cf0..406b6045d0 100644 --- a/resources/profiles/Chuanying/machine/fdm_chuanying_common.json +++ b/resources/profiles/Chuanying/machine/fdm_chuanying_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Chuanying/machine/fdm_klipper_common.json b/resources/profiles/Chuanying/machine/fdm_klipper_common.json index 16fb20b900..93631dfa17 100644 --- a/resources/profiles/Chuanying/machine/fdm_klipper_common.json +++ b/resources/profiles/Chuanying/machine/fdm_klipper_common.json @@ -116,8 +116,6 @@ "deretraction_speed": [ "80" ], - "z_lift_type": "NormalLift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Chuanying/machine/fdm_machine_common.json b/resources/profiles/Chuanying/machine/fdm_machine_common.json index a751c264bb..3adc42a1ff 100644 --- a/resources/profiles/Chuanying/machine/fdm_machine_common.json +++ b/resources/profiles/Chuanying/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "0.20mm Standard @Chuanying X1", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json index 82e196aa1e..e4ad2518a3 100644 --- a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json +++ b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.20.json @@ -11,7 +11,6 @@ "gap_infill_speed": "200", "sparse_infill_speed": "270", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "internal_solid_infill_acceleration": "7000", "accel_to_decel_enable": "0", diff --git a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json index 1a722cc07c..e2c36526ce 100644 --- a/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json +++ b/resources/profiles/Chuanying/process/fdm_process_chuanying_0.30.json @@ -19,7 +19,6 @@ "top_surface_speed": "120", "gap_infill_speed": "150", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "internal_solid_infill_acceleration": "7000", "accel_to_decel_enable": "0", diff --git a/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json b/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json index 6254ffd087..ccad22dca3 100644 --- a/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json +++ b/resources/profiles/Chuanying/process/fdm_process_chuanying_common.json @@ -17,7 +17,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "travel_acceleration": "10000", "inner_wall_acceleration": "5000", diff --git a/resources/profiles/Chuanying/process/fdm_process_common.json b/resources/profiles/Chuanying/process/fdm_process_common.json index 362b69213e..fc96799afe 100644 --- a/resources/profiles/Chuanying/process/fdm_process_common.json +++ b/resources/profiles/Chuanying/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Co Print.json b/resources/profiles/Co Print.json index e6f9fe967c..2e1ad809eb 100644 --- a/resources/profiles/Co Print.json +++ b/resources/profiles/Co Print.json @@ -1,6 +1,6 @@ { "name": "Co Print", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "CoPrint configurations", "machine_model_list": [ diff --git a/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json b/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json index 2a8510b3ab..5a6c5287c0 100644 --- a/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json +++ b/resources/profiles/Co Print/filament/Generic PLA @CoPrint.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @CoPrint", - "inherits": "fdm_filament_pla", "renamed_from": "CoPrint Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "9tNsM3FhIDgKJ05R", "filament_id": "OFDSrzZ8", @@ -10,12 +10,6 @@ "filament_vendor": [ "Generic" ], - "filament_load_time": [ - "9.75" - ], - "filament_unload_time": [ - "9.75" - ], "compatible_printers": [ "Co Print ChromaSet 0.4 nozzle", "Co Print ChromaSet 0.4 nozzle - Ender-3 V3", diff --git a/resources/profiles/Co Print/filament/fdm_filament_pla.json b/resources/profiles/Co Print/filament/fdm_filament_pla.json index 203e643a85..d83834504f 100644 --- a/resources/profiles/Co Print/filament/fdm_filament_pla.json +++ b/resources/profiles/Co Print/filament/fdm_filament_pla.json @@ -173,12 +173,6 @@ "filament_unloading_speed": [ "90" ], - "filament_load_time": [ - "9.75" - ], - "filament_unload_time": [ - "9.75" - ], "filament_toolchange_delay": [ "0" ], diff --git a/resources/profiles/Co Print/machine/fdm_machine_common.json b/resources/profiles/Co Print/machine/fdm_machine_common.json index 4b04bfff04..2d0acb2170 100644 --- a/resources/profiles/Co Print/machine/fdm_machine_common.json +++ b/resources/profiles/Co Print/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Co Print/process/fdm_process_common.json b/resources/profiles/Co Print/process/fdm_process_common.json index 5d6760a85b..72aa53a2a2 100644 --- a/resources/profiles/Co Print/process/fdm_process_common.json +++ b/resources/profiles/Co Print/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "1", "bridge_flow": "0.9031", "bridge_speed": "25", diff --git a/resources/profiles/Co Print/process/fdm_process_coprint_common.json b/resources/profiles/Co Print/process/fdm_process_coprint_common.json index c6d5478a6d..6c1b1a99ee 100644 --- a/resources/profiles/Co Print/process/fdm_process_coprint_common.json +++ b/resources/profiles/Co Print/process/fdm_process_coprint_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "1", "bridge_flow": "0.9031", "bridge_speed": "25", diff --git a/resources/profiles/CoLiDo.json b/resources/profiles/CoLiDo.json index 31d1812a06..f27623c7bc 100644 --- a/resources/profiles/CoLiDo.json +++ b/resources/profiles/CoLiDo.json @@ -1,6 +1,6 @@ { "name": "CoLiDo", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "CoLiDo configurations", "machine_model_list": [ diff --git a/resources/profiles/CoLiDo/filament/fdm_filament_pla.json b/resources/profiles/CoLiDo/filament/fdm_filament_pla.json index 5939811113..92db5ad83c 100644 --- a/resources/profiles/CoLiDo/filament/fdm_filament_pla.json +++ b/resources/profiles/CoLiDo/filament/fdm_filament_pla.json @@ -85,9 +85,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -163,9 +160,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json index 8e9b4b34c5..b02f431b3e 100644 --- a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json +++ b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json @@ -189,7 +189,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json index bbecec1d48..3c35344e79 100644 --- a/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json +++ b/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json @@ -203,7 +203,6 @@ "20" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json index 228580eece..4110cbe15d 100644 --- a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json +++ b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json @@ -189,7 +189,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/CoLiDo/machine/fdm_klipper_common.json b/resources/profiles/CoLiDo/machine/fdm_klipper_common.json index 25eeb1c066..76dbed1936 100644 --- a/resources/profiles/CoLiDo/machine/fdm_klipper_common.json +++ b/resources/profiles/CoLiDo/machine/fdm_klipper_common.json @@ -117,14 +117,13 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ "1" ], "default_filament_profile": [ - "My Generic ABS" + "Generic ABS @CoLiDo X16" ], "default_print_profile": "0.20mm Standard @MyKlipper", "bed_exclude_area": [ diff --git a/resources/profiles/CoLiDo/machine/fdm_machine_common.json b/resources/profiles/CoLiDo/machine/fdm_machine_common.json index d4a5c3be25..fbe40f97e3 100644 --- a/resources/profiles/CoLiDo/machine/fdm_machine_common.json +++ b/resources/profiles/CoLiDo/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/CoLiDo/process/fdm_process_colido_common.json b/resources/profiles/CoLiDo/process/fdm_process_colido_common.json index 86621b85e2..ac0b89ecf6 100644 --- a/resources/profiles/CoLiDo/process/fdm_process_colido_common.json +++ b/resources/profiles/CoLiDo/process/fdm_process_colido_common.json @@ -17,7 +17,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_speed": "30", diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json index b1a9fbe2b2..ade45d3c30 100644 --- a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json +++ b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40_common.json @@ -126,7 +126,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json index 63cb950583..89f7687d09 100644 --- a/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json +++ b/resources/profiles/CoLiDo/process/fdm_process_colidodiy40v2_common.json @@ -38,7 +38,6 @@ "gap_infill_speed": "100", "sparse_infill_speed": "200", "exclude_object": "1", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -103,7 +102,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json index ab06f6a756..7b12f463d5 100644 --- a/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json +++ b/resources/profiles/CoLiDo/process/fdm_process_colidosr1_common.json @@ -37,7 +37,6 @@ "gap_infill_speed": "100", "sparse_infill_speed": "200", "exclude_object": "1", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -102,7 +101,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json b/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json index ac5b507cce..66c147c002 100644 --- a/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json +++ b/resources/profiles/CoLiDo/process/fdm_process_colidox16_common.json @@ -133,7 +133,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/CoLiDo/process/fdm_process_common.json b/resources/profiles/CoLiDo/process/fdm_process_common.json index 916ca91f84..21b6c070fa 100644 --- a/resources/profiles/CoLiDo/process/fdm_process_common.json +++ b/resources/profiles/CoLiDo/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", @@ -69,7 +68,5 @@ "xy_hole_compensation": "0", "xy_contour_compensation": "0", "compatible_printers": [], - "smooth_coefficient": "80", - "overhang_totally_speed": "19", "scarf_angle_threshold": "155" } diff --git a/resources/profiles/Comgrow.json b/resources/profiles/Comgrow.json index d506431ce8..e3eb237518 100644 --- a/resources/profiles/Comgrow.json +++ b/resources/profiles/Comgrow.json @@ -1,6 +1,6 @@ { "name": "Comgrow", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "Comgrow configurations", "machine_model_list": [ diff --git a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json index ef8ce3ba93..f01aca4c88 100644 --- a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json +++ b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "PAUSE", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Comgrow/machine/fdm_machine_common.json b/resources/profiles/Comgrow/machine/fdm_machine_common.json index 7bddc2a449..6c15932ff6 100644 --- a/resources/profiles/Comgrow/machine/fdm_machine_common.json +++ b/resources/profiles/Comgrow/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json index f9fe24a86e..5d63eecaeb 100644 --- a/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.16mm Opitmal @Comgrow T500 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "VXNVLkCAnWrWUyuq", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json index 75b32fd2bc..6c716b7448 100644 --- a/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.16mm Optimal @Comgrow T500 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "fHx55sqqkzl0l6vD", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json b/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json index 9ea2e4419a..82c4edfd04 100644 --- a/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json +++ b/resources/profiles/Comgrow/process/0.18mm Optimal @Comgrow T500.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "s2ySRT9zoN0MzFMG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json b/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json index a19f2568d7..85e1eb5eb8 100644 --- a/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json +++ b/resources/profiles/Comgrow/process/0.20mm Optimal @Comgrow T300 0.4 - official.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "VFKy39bkuifq4aEz", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json index 4d428aca40..ad93a3003b 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "zwEXxLeBYeJlVsrU", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json index a50b6ac485..9683ba86ef 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "MwfGKEFTGptYVgVg", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json index 1ef23da2af..3db25ca6c5 100644 --- a/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json +++ b/resources/profiles/Comgrow/process/0.20mm Standard @Comgrow T500.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "D15fxV5mACh2XWMT", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json index d79d7afe4c..8fcbf04693 100644 --- a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "INYjczFN5gWflgRJ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json index 326c4c7d26..bb7fc4f905 100644 --- a/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.24mm Draft @Comgrow T500 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "CDKsOIpM74w1NhsA", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json index 7118e614d2..3b51d2b5aa 100644 --- a/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.24mm Optimal @Comgrow T500 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "gHH8QHbtpAr7iSj3", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json index 82140f2a11..012d382d6d 100644 --- a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json +++ b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QU9R8iFuvSrnijkO", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json index 2088fd5d01..1b345c51d8 100644 --- a/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json +++ b/resources/profiles/Comgrow/process/0.28mm SuperDraft @Comgrow T500 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "oQkDbf0FdMb4nV0i", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json index 1f9ad6050d..f24b345690 100644 --- a/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.32mm Standard @Comgrow T500 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "1IxP6FaNbkCM6bz8", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.32", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json index 515bcfdde8..32958ee493 100644 --- a/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.40mm Draft @Comgrow T500 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "67PM6ka97wMVLSJV", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.40", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json index bdae66b5e8..21009bb931 100644 --- a/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.48mm Draft @Comgrow T500 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7fJumwUT4xqMSvYo", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.48", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json b/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json index fae10074b2..6a4d439820 100644 --- a/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json +++ b/resources/profiles/Comgrow/process/0.56mm SuperDraft @Comgrow T500 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "407WH0SRTXRCg7Gz", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.56", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json index b926f2ee86..04b9a6bd06 100644 --- a/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json +++ b/resources/profiles/Comgrow/process/fdm_process_comgrow_common.json @@ -107,7 +107,6 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Comgrow/process/fdm_process_common.json b/resources/profiles/Comgrow/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Comgrow/process/fdm_process_common.json +++ b/resources/profiles/Comgrow/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index 13221d752c..a870a8d7d6 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -1,6 +1,6 @@ { "name": "Creality", - "version": "02.03.02.78", + "version": "02.03.02.80", "force_update": "0", "description": "Creality configurations", "machine_model_list": [ diff --git a/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json index faa9404b3b..fe03c214e1 100644 --- a/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @Ender-3 V4-all.json @@ -1,177 +1,175 @@ { - "type": "filament", - "name": "CR-ABS @Ender-3 V4-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "3MchJTc47Au6MkZ0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "100", - "customized_plate_temp_initial_layer": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]", - "pressure_advance": "0.024", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @Ender-3 V4-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "3MchJTc47Au6MkZ0", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "100", + "customized_plate_temp_initial_layer": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]", + "pressure_advance": "0.024", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @Hi-all.json b/resources/profiles/Creality/filament/CR-ABS @Hi-all.json index 10c1cce09d..98cb5ccd2a 100644 --- a/resources/profiles/Creality/filament/CR-ABS @Hi-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @Hi-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "CR-ABS @Hi-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "OkztCpBxncDuPVQP", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "70" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @Hi-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "OkztCpBxncDuPVQP", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "70" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json index 12afdde3cd..9ce194cf28 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K1 Max_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "CR-ABS @K1 Max_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "IuBXEntaBaPVFQXh", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K1 Max_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "IuBXEntaBaPVFQXh", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json b/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json index 00340895f4..c463f498c8 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K1 SE-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "CR-ABS @K1 SE-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "yhGkKM6yZnFFn8IW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K1 SE-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "yhGkKM6yZnFFn8IW", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json index d80c98423f..f482eba998 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K1 SE_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "CR-ABS @K1 SE_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "ERk97K6VotgHJfWy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K1 SE_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "ERk97K6VotgHJfWy", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K1C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1C-all.json index f41b1bb940..b61bdae377 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K1C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "CR-ABS @K1C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "HaRbfdv0e9gKF3Qp", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K1C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "HaRbfdv0e9gKF3Qp", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json index f91677ab31..8707ea2a53 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K1C_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "CR-ABS @K1C_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "jhNERXYu8aq28Ppb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K1C_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "jhNERXYu8aq28Ppb", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json index b83d103747..73b8b024d1 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K1_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "CR-ABS @K1_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "3irrf86tjxODkbIf", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K1_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "3irrf86tjxODkbIf", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json index d807936bfc..10bdfa06e1 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-ABS @K2 Plus-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "5CD3YjRfabJ1lA6a", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K2 Plus-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "5CD3YjRfabJ1lA6a", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json index b6334a93b6..ea99164d21 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K2 Pro-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "CR-ABS @K2 Pro-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "QuBAuyBqoGyFHMpP", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle", - "Creality K2 Pro 0.6 nozzle", - "Creality K2 Pro 0.8 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K2 Pro-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "QuBAuyBqoGyFHMpP", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle", + "Creality K2 Pro 0.6 nozzle", + "Creality K2 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json index f49bf5dd93..07b9274321 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K2 SE-all.json @@ -1,179 +1,177 @@ { - "type": "filament", - "name": "CR-ABS @K2 SE-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "8hrvutX54fd4gUGn", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K2 SE-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "8hrvutX54fd4gUGn", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-ABS @K2-all.json b/resources/profiles/Creality/filament/CR-ABS @K2-all.json index d0f92634b1..2ffd9662f3 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K2-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K2-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "CR-ABS @K2-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "rvItkEWAJNGXJrVF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle", - "Creality K2 0.6 nozzle", - "Creality K2 0.8 nozzle" - ], - "filament_id": "OFGwZmgS" -} \ No newline at end of file + "type": "filament", + "name": "CR-ABS @K2-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "rvItkEWAJNGXJrVF", + "filament_id": "OFGwZmgS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle", + "Creality K2 0.6 nozzle", + "Creality K2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json index bc9719ad07..30c7842edb 100644 --- a/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Nylon @K1 Max_CFS-C-all.json @@ -1,191 +1,189 @@ { - "type": "filament", - "name": "CR-Nylon @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "vRp7fYNhHQuLUArq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "52" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFvLppPU" -} \ No newline at end of file + "type": "filament", + "name": "CR-Nylon @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "vRp7fYNhHQuLUArq", + "filament_id": "OFvLppPU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "52" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json index bf9ce0c9e1..a95d8b9b3b 100644 --- a/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-Nylon @K1C-all.json @@ -1,192 +1,190 @@ { - "type": "filament", - "name": "CR-Nylon @K1C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "IAXnmE8e2ADhcMZG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "52" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFvLppPU" -} \ No newline at end of file + "type": "filament", + "name": "CR-Nylon @K1C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "IAXnmE8e2ADhcMZG", + "filament_id": "OFvLppPU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "52" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json index e2a7ef32fa..71b5cceb41 100644 --- a/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Nylon @K1C_CFS-C-all.json @@ -1,192 +1,190 @@ { - "type": "filament", - "name": "CR-Nylon @K1C_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "vIpGcKrZM6vbICRT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "52" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFvLppPU" -} \ No newline at end of file + "type": "filament", + "name": "CR-Nylon @K1C_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "vIpGcKrZM6vbICRT", + "filament_id": "OFvLppPU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "52" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json index 48747723f0..e3b4dc6f21 100644 --- a/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Nylon @K1_CFS-C-all.json @@ -1,192 +1,190 @@ { - "type": "filament", - "name": "CR-Nylon @K1_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "eb1T3avlK6EzZ5NT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "52" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFvLppPU" -} \ No newline at end of file + "type": "filament", + "name": "CR-Nylon @K1_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "eb1T3avlK6EzZ5NT", + "filament_id": "OFvLppPU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "52" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json index d665bb8d16..ba322bd8c7 100644 --- a/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-Nylon @K2 Plus-all.json @@ -1,198 +1,196 @@ { - "type": "filament", - "name": "CR-Nylon @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "LLuS5zOOxSWnZoyb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "52" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "16" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.064", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFvLppPU" -} \ No newline at end of file + "type": "filament", + "name": "CR-Nylon @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "LLuS5zOOxSWnZoyb", + "filament_id": "OFvLppPU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "52" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.064", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json index bfa6bd0bc7..82d0370573 100644 --- a/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @Ender-3 V4-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "CR-PETG @Ender-3 V4-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "ZucTDurgG1yttTTE", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @Ender-3 V4-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "ZucTDurgG1yttTTE", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @Hi-all.json b/resources/profiles/Creality/filament/CR-PETG @Hi-all.json index 4b3ab33892..6a37e9a7e3 100644 --- a/resources/profiles/Creality/filament/CR-PETG @Hi-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @Hi-all.json @@ -1,152 +1,150 @@ { - "type": "filament", - "name": "CR-PETG @Hi-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "DGnnBUZoF5EJdo8y", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[4.0,225],[7.0,230],[10.0,240]]", - "pressure_advance": "0.072", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.2 nozzle", - "Creality Hi 0.4 nozzle", - "Creality Hi 0.6 nozzle", - "Creality Hi 0.8 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @Hi-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "DGnnBUZoF5EJdo8y", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[4.0,225],[7.0,230],[10.0,240]]", + "pressure_advance": "0.072", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.2 nozzle", + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle", + "Creality Hi 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json index bc597f92b3..873e8c8174 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K1 Max_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PETG @K1 Max_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "7zmI8UK4VCbkrHth", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", - "pressure_advance": "0.078", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K1 Max_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "7zmI8UK4VCbkrHth", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", + "pressure_advance": "0.078", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json b/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json index 1c92de9916..18de1bb62f 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K1 SE-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "CR-PETG @K1 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "oR9hRU1vmcDXuEdN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "85" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "85" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "85" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K1 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "oR9hRU1vmcDXuEdN", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "85" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "85" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json index be3983b772..4732ece2ae 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K1 SE_CFS-C-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "CR-PETG @K1 SE_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "O5oj2seoJOMoRQeH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "85" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "85" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "85" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K1 SE_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "O5oj2seoJOMoRQeH", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "85" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "85" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,250]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K1C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1C-all.json index 2829598e5a..6bb86df975 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K1C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PETG @K1C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "TCoincnHkpTkdbgr", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", - "pressure_advance": "0.062", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K1C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "TCoincnHkpTkdbgr", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", + "pressure_advance": "0.062", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json index a6ee2af473..537ab817e9 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K1C_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "CR-PETG @K1C_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "tEizEoyTjR2jsMjb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", - "pressure_advance": "0.062", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K1C_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "tEizEoyTjR2jsMjb", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", + "pressure_advance": "0.062", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json index d05baf33af..936ec3ba8c 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K1_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PETG @K1_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "GyuPdDlFigxqfNdh", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", - "pressure_advance": "0.072", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K1_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "GyuPdDlFigxqfNdh", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", + "pressure_advance": "0.072", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json index ead310f41c..4a9e23750b 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "CR-PETG @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "L9YgZiTMEbGueIUB", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "L9YgZiTMEbGueIUB", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json index b73011595f..a7a5eec9be 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K2 Pro-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "CR-PETG @K2 Pro-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "cpZpusYQklJHwF7C", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle", - "Creality K2 Pro 0.6 nozzle", - "Creality K2 Pro 0.8 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K2 Pro-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "cpZpusYQklJHwF7C", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle", + "Creality K2 Pro 0.6 nozzle", + "Creality K2 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json index 2137f18ef6..6c2a833714 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K2 SE-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PETG @K2 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "wszfgAr4wGMhfak4", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "85" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K2 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "wszfgAr4wGMhfak4", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "85" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @K2-all.json b/resources/profiles/Creality/filament/CR-PETG @K2-all.json index 16bd7c7053..c53735d1d4 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K2-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K2-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "CR-PETG @K2-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "twFraQUSFLNuYrQd", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle", - "Creality K2 0.6 nozzle", - "Creality K2 0.8 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @K2-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "twFraQUSFLNuYrQd", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle", + "Creality K2 0.6 nozzle", + "Creality K2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json index befe270b95..a5ae82bc50 100644 --- a/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json @@ -1,139 +1,137 @@ { - "type": "filament", - "name": "CR-PETG @SPARKX i7-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "RFW04K7trMKi3cYq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[1.0,205],[1.2,220]]", - "pressure_advance": "0.3", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.2 nozzle", - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OF3WQaKK" -} \ No newline at end of file + "type": "filament", + "name": "CR-PETG @SPARKX i7-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "RFW04K7trMKi3cYq", + "filament_id": "OF3WQaKK", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[1.0,205],[1.2,220]]", + "pressure_advance": "0.3", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.2 nozzle", + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json index 83548daafd..5b3868f3be 100644 --- a/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @Ender-3 V4-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "CR-PLA @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "hy5Zpwpkx46UQlFy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "hy5Zpwpkx46UQlFy", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @Hi-all.json b/resources/profiles/Creality/filament/CR-PLA @Hi-all.json index 0dc26b51ba..89c8609ea5 100644 --- a/resources/profiles/Creality/filament/CR-PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @Hi-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "CR-PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "2g9MEZ7yniK64tVA", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.2 nozzle", - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "2g9MEZ7yniK64tVA", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.2 nozzle", + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json index 84fb331f5b..b606e1ba81 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K1 Max_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "CR-PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "rkd11EbVutxkB4Yy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "rkd11EbVutxkB4Yy", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json b/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json index 1f5d2b746a..37191e5b4b 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K1 SE-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "CR-PLA @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "dFig6q8KlgjU4stK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dFig6q8KlgjU4stK", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json index f8517e48b5..cf13c1845e 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K1 SE_CFS-C-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "CR-PLA @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "2sTv8VK78NAkgv22", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "2sTv8VK78NAkgv22", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1C-all.json index 092a18533d..e5f40ce73b 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K1C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "3chsaV1fugQudOqC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "3chsaV1fugQudOqC", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json index e564114150..8e3aff7029 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K1C_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Xu46QkbGLqe9nSxT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Xu46QkbGLqe9nSxT", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json index 2796306e7f..a9bb576d9a 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K1_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "dDLVUGD8AqxJuSb2", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dDLVUGD8AqxJuSb2", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json index a175fcdb46..48d6542c23 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "CR-PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "FsNcay7aLjZKGih8", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "FsNcay7aLjZKGih8", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json index b30c6e90fe..c97cda56fa 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K2 Pro-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "yXWDlqzGqqIg2tbx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "yXWDlqzGqqIg2tbx", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json index 4de70e5062..c3fe4a1f36 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K2 SE-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "CR-PLA @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "j8Iaz6y4iiOw2I5n", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "j8Iaz6y4iiOw2I5n", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @K2-all.json b/resources/profiles/Creality/filament/CR-PLA @K2-all.json index 26a62766b0..fbcb4cfb49 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K2-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K2-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "7f0r4XOgIhVG2OPH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "7f0r4XOgIhVG2OPH", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json index ad5aad1c66..a4cbf4f3f9 100644 --- a/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @SPARKX i7-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "CR-PLA @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "G1KqKgylj61LrtiS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[1.2,220]]", - "pressure_advance": "0.032", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFp4ETDP" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "G1KqKgylj61LrtiS", + "filament_id": "OFp4ETDP", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[1.2,220]]", + "pressure_advance": "0.032", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json index cfc58c9cf8..09421321fe 100644 --- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1 Max_CFS-C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Carbon @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "VzHBAqKC0WWSEga0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFrM4hdm" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Carbon @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "VzHBAqKC0WWSEga0", + "filament_id": "OFrM4hdm", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json index e6eaf070f8..ec102d33a4 100644 --- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Carbon @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "2ve6KpyKswcbHPJi", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFrM4hdm" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Carbon @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "2ve6KpyKswcbHPJi", + "filament_id": "OFrM4hdm", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json index 2e369e8a3c..1b363a0c68 100644 --- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1C_CFS-C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Carbon @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "MbgilTqqbN9QZvtq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFrM4hdm" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Carbon @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "MbgilTqqbN9QZvtq", + "filament_id": "OFrM4hdm", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json index 47bfd16093..4847bc1620 100644 --- a/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K1_CFS-C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Carbon @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "e5ACy8cJonV9q1pe", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFrM4hdm" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Carbon @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "e5ACy8cJonV9q1pe", + "filament_id": "OFrM4hdm", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json index b7fb77695e..3a8c3cf1ca 100644 --- a/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Carbon @K2 Plus-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Carbon @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ua3BCvZtfYAgH7nN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFrM4hdm" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Carbon @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ua3BCvZtfYAgH7nN", + "filament_id": "OFrM4hdm", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json index ee3510a9cc..761fd855b4 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1 Max_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "njQE4bpSlZHrCqrg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "njQE4bpSlZHrCqrg", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json index 22d113814a..4bc597182f 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "eCuLoIdPsTEiLxZB", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "eCuLoIdPsTEiLxZB", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json index 59bf2e48e6..384e74eb75 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1C_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "5vTZFUcLv6DL06Nr", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "5vTZFUcLv6DL06Nr", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json index 4a3a27bfb5..ae580ced18 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K1_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "HDRiQNtbO8jZR6tW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "HDRiQNtbO8jZR6tW", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json index 5b3aaccd1f..fc0b3e724a 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "gKRZWt2XVBGFoQ6t", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "gKRZWt2XVBGFoQ6t", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json index c2dbe07744..b54f3e6745 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Pro-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "yGc6fpse4MyUXWXa", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "yGc6fpse4MyUXWXa", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json index 98a41262c4..179e2c9421 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Fluo @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "BJwFbpJ8baT3vyEU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "BJwFbpJ8baT3vyEU", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json index 759d5cbd88..69dd52a125 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @SPARKX i7-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Fluo @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "0xviyTPYLAxrpVGK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFgpQwkk" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Fluo @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "0xviyTPYLAxrpVGK", + "filament_id": "OFgpQwkk", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json index 1ed05bed21..2ec7cab65d 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @Ender-3 V4-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "CR-PLA Matte @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "0edq8qWqKaGPZc1t", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,220]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "0edq8qWqKaGPZc1t", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,220]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json index 80373199ad..c18a9dc8c4 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1 Max_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Matte @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ZFXelUe4vcYytBIg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ZFXelUe4vcYytBIg", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json index ac4a9fc0ff..cde0fa3c9b 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Matte @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "mQDyxAEILwLuFWAw", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "mQDyxAEILwLuFWAw", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json index cd8ea92f5a..4773356cc7 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1C_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Matte @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "38NjxetvurFFPPEy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "38NjxetvurFFPPEy", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json index 1779ce9a54..76654b9172 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K1_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Matte @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "KFNeCYp4ck8diZRG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "KFNeCYp4ck8diZRG", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.1,190], [1.5,190], [1.6,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json index ebfe70bac1..ae46802d71 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-PLA Matte @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "WXOXHiNp1tvh4Y5T", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "WXOXHiNp1tvh4Y5T", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json index 90436b9e4b..adc321314c 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Pro-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Matte @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "LNN1w66GDTFxTCMq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "LNN1w66GDTFxTCMq", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json index b2bc9f1bc4..9569a1ce13 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "CR-PLA Matte @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "nk9dxS7bcChQ26pZ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "nk9dxS7bcChQ26pZ", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json index 5cf37492a4..7ada0c085a 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json @@ -1,170 +1,168 @@ { - "type": "filament", - "name": "CR-PLA Matte @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "NNx1aU5NjcyeKPec", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[1.2,220]]", - "pressure_advance": "0.23", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.2 nozzle", - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OFM0xjBG" -} \ No newline at end of file + "type": "filament", + "name": "CR-PLA Matte @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "NNx1aU5NjcyeKPec", + "filament_id": "OFM0xjBG", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[1.2,220]]", + "pressure_advance": "0.23", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.2 nozzle", + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json b/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json index 494d7245c9..9f62ca07bc 100644 --- a/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @Ender-3 V4-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "CR-Silk @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "96xBgfns6PJljRBO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "96xBgfns6PJljRBO", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @Hi-all.json b/resources/profiles/Creality/filament/CR-Silk @Hi-all.json index 497ddcd169..2d811b10f5 100644 --- a/resources/profiles/Creality/filament/CR-Silk @Hi-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @Hi-all.json @@ -1,145 +1,143 @@ { - "type": "filament", - "name": "CR-Silk @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "tCMjuQOR2yj66jPW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", - "pressure_advance": "0.026", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "tCMjuQOR2yj66jPW", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", + "pressure_advance": "0.026", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json index bffe643c8c..23e8a0762d 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K1 Max_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "CR-Silk @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ljLSobQ4S3BAkBNk", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ljLSobQ4S3BAkBNk", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json b/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json index 39ba90b647..04624cfc25 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K1 SE-all.json @@ -1,147 +1,145 @@ { - "type": "filament", - "name": "CR-Silk @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "jHEDkgKkZAy21Ali", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "jHEDkgKkZAy21Ali", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "80" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json index 33b0ddc999..0755c45631 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K1 SE_CFS-C-all.json @@ -1,147 +1,145 @@ { - "type": "filament", - "name": "CR-Silk @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "GbHXYf8i8km1Ox5r", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "GbHXYf8i8km1Ox5r", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "80" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K1C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1C-all.json index 7ba2624bae..ea9fad8877 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K1C-all.json @@ -1,162 +1,160 @@ { - "type": "filament", - "name": "CR-Silk @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "I4LxzBtRIwagIQUJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "I4LxzBtRIwagIQUJ", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json index ddbf57b5f2..6150166773 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K1C_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "CR-Silk @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "JMpBkMELewelYBDU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "JMpBkMELewelYBDU", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json index 3e0e45cd87..47b4468887 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K1_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "CR-Silk @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "dVxmGRP36D3lampi", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dVxmGRP36D3lampi", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json index a2320f3f4e..d1d211884e 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "CR-Silk @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "8mKZzYS3ykGEMqjH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "8mKZzYS3ykGEMqjH", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json index 4c1f433c61..75c276d993 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K2 Pro-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "CR-Silk @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "KBVdrZA7bYRpGztN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "KBVdrZA7bYRpGztN", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json index 9c1415001b..b598e9df65 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K2 SE-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "CR-Silk @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "0bvCEevcKO0uubLD", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "0bvCEevcKO0uubLD", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @K2-all.json b/resources/profiles/Creality/filament/CR-Silk @K2-all.json index 97e5d7da31..49486812c4 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K2-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K2-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "CR-Silk @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "MXAd3uHJUNHLFA4i", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "MXAd3uHJUNHLFA4i", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json index 11a92b0357..e3c2ae9f62 100644 --- a/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "CR-Silk @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "A30ICaD1Lz0cWkEH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[1.2,220]]", - "pressure_advance": "0.13", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.2 nozzle", - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OF3OMgrI" -} \ No newline at end of file + "type": "filament", + "name": "CR-Silk @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "A30ICaD1Lz0cWkEH", + "filament_id": "OF3OMgrI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[1.2,220]]", + "pressure_advance": "0.13", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.2 nozzle", + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json index 8ad140c757..8e5ab63281 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K1 Max_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "CR-TPU @K1 Max_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "KkOkqdyd9DekhhNx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K1 Max_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "KkOkqdyd9DekhhNx", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K1C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1C-all.json index 001f3c5e5c..5740a6c8fb 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K1C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "CR-TPU @K1C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "7IDbEU7GXQfJbFQz", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K1C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "7IDbEU7GXQfJbFQz", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json index 9d10ae7b5c..60f72ca75e 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K1C_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "CR-TPU @K1C_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "m33d4hGzs5ZC1faF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K1C_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "m33d4hGzs5ZC1faF", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json index 5be19a6852..526fc9daad 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K1_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "CR-TPU @K1_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "kt3VziPx3umU4Q5R", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K1_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "kt3VziPx3umU4Q5R", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json index b79e38758b..c68afd06dc 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K2 Plus-all.json @@ -1,170 +1,168 @@ { - "type": "filament", - "name": "CR-TPU @K2 Plus-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "KioNr9VhBOnLMtnm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1.02" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.34", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K2 Plus-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "KioNr9VhBOnLMtnm", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1.02" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.34", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json b/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json index e3ea591f17..5e1ca5fef1 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K2 Pro-all.json @@ -1,175 +1,173 @@ { - "type": "filament", - "name": "CR-TPU @K2 Pro-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "8akFfk1Evt6aKtRL", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1.02" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.34", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K2 Pro-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "8akFfk1Evt6aKtRL", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1.02" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.34", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @K2-all.json b/resources/profiles/Creality/filament/CR-TPU @K2-all.json index a336ca1e66..5ba623ff46 100644 --- a/resources/profiles/Creality/filament/CR-TPU @K2-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @K2-all.json @@ -1,175 +1,173 @@ { - "type": "filament", - "name": "CR-TPU @K2-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "ZXIOQXEGhsUn2x8j", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @K2-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "ZXIOQXEGhsUn2x8j", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json b/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json index 3b6e8923eb..ca5cb0fbfc 100644 --- a/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/CR-TPU @SPARKX i7-all.json @@ -1,179 +1,177 @@ { - "type": "filament", - "name": "CR-TPU @SPARKX i7-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "mCfhjDYJc8oh3k2X", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1.12" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.34", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFG2RkhN" -} \ No newline at end of file + "type": "filament", + "name": "CR-TPU @SPARKX i7-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "mCfhjDYJc8oh3k2X", + "filament_id": "OFG2RkhN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1.12" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.34", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json index 2d59b01143..3b695ef493 100644 --- a/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Wood @K1 Max_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "CR-Wood @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "vIzshYLqN5j6pkDn", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGxC8gB" -} \ No newline at end of file + "type": "filament", + "name": "CR-Wood @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "vIzshYLqN5j6pkDn", + "filament_id": "OFGxC8gB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Wood @K1C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1C-all.json index 20477f04a9..ee30ee419d 100644 --- a/resources/profiles/Creality/filament/CR-Wood @K1C-all.json +++ b/resources/profiles/Creality/filament/CR-Wood @K1C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "CR-Wood @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zSfzwta4F6MAXAn7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFGxC8gB" -} \ No newline at end of file + "type": "filament", + "name": "CR-Wood @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zSfzwta4F6MAXAn7", + "filament_id": "OFGxC8gB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json index 95dc4f4c95..a36e476dd4 100644 --- a/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Wood @K1C_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "CR-Wood @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "5n4iNCttBHmnXKaT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGxC8gB" -} \ No newline at end of file + "type": "filament", + "name": "CR-Wood @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "5n4iNCttBHmnXKaT", + "filament_id": "OFGxC8gB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json b/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json index e029b37f79..eac27b5a22 100644 --- a/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/CR-Wood @K1_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "CR-Wood @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "kBGvS0Npk3V5eY8j", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGxC8gB" -} \ No newline at end of file + "type": "filament", + "name": "CR-Wood @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "kBGvS0Npk3V5eY8j", + "filament_id": "OFGxC8gB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json index aa7a1f5eee..160a0cd258 100644 --- a/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-Wood @K2 Plus-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "CR-Wood @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "NFRGg9wmbojJ0Ye9", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFGxC8gB" -} \ No newline at end of file + "type": "filament", + "name": "CR-Wood @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "NFRGg9wmbojJ0Ye9", + "filament_id": "OFGxC8gB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json index cb50c6f7fb..91bd548a37 100644 --- a/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json @@ -43,7 +43,6 @@ ], "filament_flow_ratio": "0.92", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -73,7 +72,6 @@ "filament_type": [ "ABS" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json index 6a71e56fff..3333526fd3 100644 --- a/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json @@ -43,7 +43,6 @@ ], "filament_flow_ratio": "0.97", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json index d44e4d96bf..eed4198aea 100644 --- a/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json @@ -43,7 +43,6 @@ ], "filament_flow_ratio": "0.9", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -73,7 +72,6 @@ "filament_type": [ "PLA-CF" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json b/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json index d8a060f9b5..24b7aec597 100644 --- a/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json @@ -43,7 +43,6 @@ ], "filament_flow_ratio": "0.85", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -73,7 +72,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json index a7c696718f..6a01014a09 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K1 Max_CFS-C-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "EN-PLA+ @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "158lgUy4NWVKp625", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "90" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "158lgUy4NWVKp625", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "90" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json index c680265601..68a1c41f23 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K1C-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "EN-PLA+ @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "GGgjz1BfWVm9G9oO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "90" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "GGgjz1BfWVm9G9oO", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "90" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json index 50816aed69..fac99aa191 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K1C_CFS-C-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "EN-PLA+ @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "gZVVoUCJ7QRhAHjO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "90" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "gZVVoUCJ7QRhAHjO", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "90" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json index 43728032ef..6ff1d73bc7 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K1_CFS-C-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "EN-PLA+ @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Av0kmRfBxzfEtFMI", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "90" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Av0kmRfBxzfEtFMI", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "90" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json index 25642697d9..7df41a79d8 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K2 Plus-all.json @@ -1,155 +1,153 @@ { - "type": "filament", - "name": "EN-PLA+ @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "8jntA1DA7UKpFB5D", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "8jntA1DA7UKpFB5D", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json index 16a318a1e0..45ac03cfdc 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K2 Pro-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "EN-PLA+ @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "xIghXweOHDN6eUJA", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "xIghXweOHDN6eUJA", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json b/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json index e9693dabcc..1b3877c95f 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @K2-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "EN-PLA+ @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "knIpfA9wHBoyClD9", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "knIpfA9wHBoyClD9", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json b/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json index e19e06f40e..22552b9ec9 100644 --- a/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/EN-PLA+ @SPARKX i7-all.json @@ -1,170 +1,168 @@ { - "type": "filament", - "name": "EN-PLA+ @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "noCevEGFMtClqvDZ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFks6esg" -} \ No newline at end of file + "type": "filament", + "name": "EN-PLA+ @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "noCevEGFMtClqvDZ", + "filament_id": "OFks6esg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json index 3fd9b4ef24..4c3854163c 100644 --- a/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/ENDER FAST PLA @Hi-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "ENDER FAST PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ZK9la4OwCbY6P1Ka", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.3" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFfSqS4R" -} \ No newline at end of file + "type": "filament", + "name": "ENDER FAST PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ZK9la4OwCbY6P1Ka", + "filament_id": "OFfSqS4R", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.3" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json index a27a828dfb..cf7a5ef46a 100644 --- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "ENDER FAST PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "aX5GTeSuTe2xMM6U", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "53" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFfSqS4R" -} \ No newline at end of file + "type": "filament", + "name": "ENDER FAST PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "aX5GTeSuTe2xMM6U", + "filament_id": "OFfSqS4R", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "53" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json index 4f831d47ab..f9d5b70345 100644 --- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Pro-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "ENDER FAST PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "rPu8RtmT8ketxiKn", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFfSqS4R" -} \ No newline at end of file + "type": "filament", + "name": "ENDER FAST PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "rPu8RtmT8ketxiKn", + "filament_id": "OFfSqS4R", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json index 9c2fd90d30..cc020aeb91 100644 --- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json +++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "ENDER FAST PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "KXmnvtnGjZiXVYVs", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFfSqS4R" -} \ No newline at end of file + "type": "filament", + "name": "ENDER FAST PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "KXmnvtnGjZiXVYVs", + "filament_id": "OFfSqS4R", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json index c96ff98d72..e365bffac4 100644 --- a/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/ENDER FAST PLA @SPARKX i7-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "ENDER FAST PLA @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "EOJUiD8x2hx3y4HO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "53" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFfSqS4R" -} \ No newline at end of file + "type": "filament", + "name": "ENDER FAST PLA @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "EOJUiD8x2hx3y4HO", + "filament_id": "OFfSqS4R", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "53" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json index 711b1b22a7..bfd0581d4a 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @Ender-3 V4-all.json @@ -1,147 +1,145 @@ { - "type": "filament", - "name": "Ender-PLA @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "4ZsPBPTcW7Nbud94", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,220]]", - "pressure_advance": "0.024", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "4ZsPBPTcW7Nbud94", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,220]]", + "pressure_advance": "0.024", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json b/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json index 27ea82bdd3..011f599d96 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @Hi-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "Ender-PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "3cpofydFoBjnKdNH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "3cpofydFoBjnKdNH", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json index ed995443e3..88a1f5a286 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K1 Max_CFS-C-all.json @@ -1,155 +1,153 @@ { - "type": "filament", - "name": "Ender-PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "CHtytKAUVFpAy8Qm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "CHtytKAUVFpAy8Qm", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json index c220fa54ac..20407c7014 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K1C-all.json @@ -1,155 +1,153 @@ { - "type": "filament", - "name": "Ender-PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "xnFY6LUmvd7zH1kQ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "xnFY6LUmvd7zH1kQ", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json index 2471ec31bb..2c5af7fd59 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K1C_CFS-C-all.json @@ -1,155 +1,153 @@ { - "type": "filament", - "name": "Ender-PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Q3cb72JAry8Nj9Jc", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Q3cb72JAry8Nj9Jc", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json index f10bf01177..5e3bbc2075 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K1_CFS-C-all.json @@ -1,155 +1,153 @@ { - "type": "filament", - "name": "Ender-PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "tITLcxwReOtBn4un", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "tITLcxwReOtBn4un", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200], [1.1,210], [1.4,220]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json index 51b85450b3..2215821808 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K2 Plus-all.json @@ -1,152 +1,150 @@ { - "type": "filament", - "name": "Ender-PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "CZfEiMPan3Lz1qK6", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "CZfEiMPan3Lz1qK6", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json index 8e04e8fee9..f2bd325441 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K2 Pro-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "Ender-PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "QqeD0acLtTx3o8hq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "QqeD0acLtTx3o8hq", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @K2-all.json b/resources/profiles/Creality/filament/Ender-PLA @K2-all.json index b26145bea9..364a6e25a8 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @K2-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @K2-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "Ender-PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "r81gYSIP0AGeFowj", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "r81gYSIP0AGeFowj", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json index 11a85cc128..7cf95acc28 100644 --- a/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Ender-PLA @SPARKX i7-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Ender-PLA @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "I8mV3hBRdyGTSqgt", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.034", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFWao3Ic" -} \ No newline at end of file + "type": "filament", + "name": "Ender-PLA @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "I8mV3hBRdyGTSqgt", + "filament_id": "OFWao3Ic", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.034", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json index 5a6f7a93c9..f385b23057 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Creality Ender-5Max-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Creality Ender-5Max-all", - "inherits": "fdm_filament_common", "renamed_from": "Creality Generic ABS @Ender-5Max-all;Creality Generic ABS Ender-5Max-all", + "inherits": "fdm_filament_common", "from": "system", "setting_id": "qurtvw5OhkVfgpaC", "filament_id": "OFY9muEs", @@ -44,7 +44,6 @@ ], "filament_flow_ratio": "0.85", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "ABS" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json index d1f8662025..0c1700464a 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Ender-3 V4-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "Generic ABS @Ender-3 V4-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "4uYoekJTerUnoYl8", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "90", - "customized_plate_temp_initial_layer": "90", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]", - "pressure_advance": "0.026", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @Ender-3 V4-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "4uYoekJTerUnoYl8", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "90", + "customized_plate_temp_initial_layer": "90", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]", + "pressure_advance": "0.026", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @Hi-all.json b/resources/profiles/Creality/filament/Generic ABS @Hi-all.json index 9f43259110..dad6fd75a7 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Hi-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Hi-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic ABS @Hi-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "9z0uoXnHksedYsyq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "70" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @Hi-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "9z0uoXnHksedYsyq", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "70" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json index 4d1de77b9e..47623ecde9 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K1 Max_CFS-C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic ABS @K1 Max_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "VF8DUfOECtADXXXT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K1 Max_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "VF8DUfOECtADXXXT", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json b/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json index 974ca3a49a..f69924da6e 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K1 SE-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic ABS @K1 SE-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "6tqh2NX6hGdsR8Gy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K1 SE-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "6tqh2NX6hGdsR8Gy", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json index 8fa83c2dbf..7c54336fe3 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K1 SE_CFS-C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic ABS @K1 SE_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "D95cc9TGmWbPC8em", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K1 SE_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "D95cc9TGmWbPC8em", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K1C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1C-all.json index 0d8c23a2e7..5f883ca259 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K1C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic ABS @K1C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "CGDrkpaby0ZdpoSH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K1C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "CGDrkpaby0ZdpoSH", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json index 888b283059..1877f70bc7 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K1C_CFS-C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic ABS @K1C_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "eMQXlXLK9wyeqYEx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K1C_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "eMQXlXLK9wyeqYEx", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json index 58d749dea3..2621ca7398 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K1_CFS-C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic ABS @K1_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "3YcpDd1XsJKf2T02", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K1_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "3YcpDd1XsJKf2T02", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json index 425411f466..93a01f5a2d 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K2 Plus-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "Generic ABS @K2 Plus-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "ju8Vp3ee2mBYGzKr", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K2 Plus-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "ju8Vp3ee2mBYGzKr", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json index a03c0fbfcb..7b20d35951 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K2 Pro-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "Generic ABS @K2 Pro-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "CKz3942iA5I2gfaA", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K2 Pro-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "CKz3942iA5I2gfaA", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json b/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json index 846dc3b748..b711a5eefd 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K2 SE-all.json @@ -1,179 +1,177 @@ { - "type": "filament", - "name": "Generic ABS @K2 SE-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "PdjEPWVOSloevfUZ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K2 SE-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "PdjEPWVOSloevfUZ", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ABS @K2-all.json b/resources/profiles/Creality/filament/Generic ABS @K2-all.json index 0eefa273a9..15ecff7328 100644 --- a/resources/profiles/Creality/filament/Generic ABS @K2-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @K2-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "Generic ABS @K2-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "v8K9u7osBIzsrQCh", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFY9muEs" -} \ No newline at end of file + "type": "filament", + "name": "Generic ABS @K2-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "v8K9u7osBIzsrQCh", + "filament_id": "OFY9muEs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json index 0fa424b522..66cb8a6eb8 100644 --- a/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @Creality Ender-5Max-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Creality Ender-5Max-all", - "inherits": "fdm_filament_common", "renamed_from": "Creality Generic ASA @Ender-5Max-all;Creality Generic ASA Ender-5Max-all", + "inherits": "fdm_filament_common", "from": "system", "setting_id": "7qyRWm8KXa1YUPpl", "filament_id": "OFLPAxz3", @@ -44,7 +44,6 @@ ], "filament_flow_ratio": "0.85", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "ASA" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json index 6f9ee6971e..f4b1fd74fb 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K1 Max_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic ASA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "JS8oDrWmlTmmZ9VJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "JS8oDrWmlTmmZ9VJ", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json b/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json index d5850749d2..81854fca9b 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K1 SE-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "Generic ASA @K1 SE-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "XK0E9L6nEGz9410w", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "55", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K1 SE-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "XK0E9L6nEGz9410w", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "55", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json index 8894ee7af1..450ccb9a72 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K1 SE_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "Generic ASA @K1 SE_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "U4HDFaHTS7EtgCJj", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "55", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K1 SE_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "U4HDFaHTS7EtgCJj", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "55", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K1C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1C-all.json index 2669b08f43..3d8bdcc19e 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K1C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic ASA @K1C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "Yya6SGcDEMvAKLYs", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K1C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "Yya6SGcDEMvAKLYs", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json index 0a5dc5d18a..46af0e1676 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K1C_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic ASA @K1C_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "1nVS1yN0psDyFajd", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K1C_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "1nVS1yN0psDyFajd", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json index 33cf5b2860..f94d0c06f5 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K1_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic ASA @K1_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "62EZvOkMH6gWc6CU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K1_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "62EZvOkMH6gWc6CU", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json index f1bdbc1310..d67a15b081 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K2 Plus-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic ASA @K2 Plus-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "bPiPJ2MrgMOq01jX", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "40" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K2 Plus-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "bPiPJ2MrgMOq01jX", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json index 346f7bfec6..6ed2f4deed 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K2 Pro-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "Generic ASA @K2 Pro-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "RScrAM7qssIS1RQC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "90" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.032", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K2 Pro-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "RScrAM7qssIS1RQC", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "90" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.032", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json b/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json index 758d45606e..ef2fe096e9 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K2 SE-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "Generic ASA @K2 SE-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "B3KqWjy2YfMDxjbS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K2 SE-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "B3KqWjy2YfMDxjbS", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA @K2-all.json b/resources/profiles/Creality/filament/Generic ASA @K2-all.json index 68b9b71b9e..0b12417aa3 100644 --- a/resources/profiles/Creality/filament/Generic ASA @K2-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @K2-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Generic ASA @K2-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "nmVYYCCRebt7sRKj", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "20" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFLPAxz3" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA @K2-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "nmVYYCCRebt7sRKj", + "filament_id": "OFLPAxz3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "20" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json index f98421ad49..c31060aa30 100644 --- a/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic ASA-CF @K2 Plus-all.json @@ -1,148 +1,146 @@ { - "type": "filament", - "name": "Generic ASA-CF @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "DnKtg4yCiafeDBIu", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.2" - ], - "filament_flow_ratio": [ - "0.92" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_type": [ - "ASA-CF" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF53eLVD" -} \ No newline at end of file + "type": "filament", + "name": "Generic ASA-CF @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "DnKtg4yCiafeDBIu", + "filament_id": "OF53eLVD", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_type": [ + "ASA-CF" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json b/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json index 33ac63d296..3395945ad0 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @Hi-all.json @@ -1,131 +1,129 @@ { - "type": "filament", - "name": "Generic BVOH @Hi-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "5HO5PysrHUKqReVb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "60" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "150" - ], - "filament_density": [ - "1.138" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @Hi-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "5HO5PysrHUKqReVb", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "150" + ], + "filament_density": [ + "1.138" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json index e0cfdb7090..62b0ea6edd 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K1 Max_CFS-C-all.json @@ -1,162 +1,160 @@ { - "type": "filament", - "name": "Generic BVOH @K1 Max_CFS-C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "rzpKPYQdPjzN3oVS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.138" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "7" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K1 Max_CFS-C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "rzpKPYQdPjzN3oVS", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.138" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "7" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json index 9f2cbf4200..e1c3414cd5 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K1C-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "Generic BVOH @K1C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "sBNRrUUShVPgFlD2", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.138" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "7" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K1C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "sBNRrUUShVPgFlD2", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.138" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "7" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json index e79e575992..e068c8e767 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K1C_CFS-C-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "Generic BVOH @K1C_CFS-C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "F35hv7Jv8sdPpHuG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.138" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "7" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K1C_CFS-C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "F35hv7Jv8sdPpHuG", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.138" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "7" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json index 9bd399cbf0..34418ac001 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K1_CFS-C-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "Generic BVOH @K1_CFS-C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "quzQIkhGomoTlGMy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.138" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "7" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K1_CFS-C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "quzQIkhGomoTlGMy", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.138" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "7" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json index c525c695d7..efbf6d921a 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K2 Plus-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic BVOH @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "s7taqaFnDhBFXnJQ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "60" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.138" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "s7taqaFnDhBFXnJQ", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.138" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json index 4d3492a70f..671072f839 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K2 Pro-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic BVOH @K2 Pro-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "WN4gUC7lL433UeUa", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "50" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "150" - ], - "filament_density": [ - "1.138" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K2 Pro-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "WN4gUC7lL433UeUa", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "150" + ], + "filament_density": [ + "1.138" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic BVOH @K2-all.json b/resources/profiles/Creality/filament/Generic BVOH @K2-all.json index 1f8bea7aef..bd5c265ca3 100644 --- a/resources/profiles/Creality/filament/Generic BVOH @K2-all.json +++ b/resources/profiles/Creality/filament/Generic BVOH @K2-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic BVOH @K2-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "appeb6xRpTFbyGsM", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "50" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "150" - ], - "filament_density": [ - "1.138" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "BVOH" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "filament_adhesiveness_category": "797", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFo2UF2C" -} \ No newline at end of file + "type": "filament", + "name": "Generic BVOH @K2-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "appeb6xRpTFbyGsM", + "filament_id": "OFo2UF2C", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "150" + ], + "filament_density": [ + "1.138" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "BVOH" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "filament_adhesiveness_category": "797", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json index 9549195611..68517664f2 100644 --- a/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json @@ -1,173 +1,171 @@ { - "type": "filament", - "name": "Generic HIPS @K1 Max_CFS-C-all", - "inherits": "fdm_filament_hips", - "from": "system", - "setting_id": "un4bn2cxbFdGO3DR", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.05" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "HIPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFsFon5l" -} \ No newline at end of file + "type": "filament", + "name": "Generic HIPS @K1 Max_CFS-C-all", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "un4bn2cxbFdGO3DR", + "filament_id": "OFsFon5l", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.05" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "HIPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json index 5016c1e5a5..1b5d0ceaaf 100644 --- a/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic HIPS @K1C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic HIPS @K1C-all", - "inherits": "fdm_filament_hips", - "from": "system", - "setting_id": "e1wQQnbsFK0eOT76", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.05" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "HIPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFsFon5l" -} \ No newline at end of file + "type": "filament", + "name": "Generic HIPS @K1C-all", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "e1wQQnbsFK0eOT76", + "filament_id": "OFsFon5l", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.05" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "HIPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json index 33950552d8..21f3ff5869 100644 --- a/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic HIPS @K1C_CFS-C-all", - "inherits": "fdm_filament_hips", - "from": "system", - "setting_id": "5ZZon4W5GRf2ilKk", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.05" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "HIPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFsFon5l" -} \ No newline at end of file + "type": "filament", + "name": "Generic HIPS @K1C_CFS-C-all", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "5ZZon4W5GRf2ilKk", + "filament_id": "OFsFon5l", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.05" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "HIPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json index 7b1ab3190b..20dac07db8 100644 --- a/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic HIPS @K1_CFS-C-all", - "inherits": "fdm_filament_hips", - "from": "system", - "setting_id": "81vAelQ8KbUPkNAL", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.05" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "HIPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFsFon5l" -} \ No newline at end of file + "type": "filament", + "name": "Generic HIPS @K1_CFS-C-all", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "81vAelQ8KbUPkNAL", + "filament_id": "OFsFon5l", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.05" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "HIPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json index 255e9e8b6e..e24516c121 100644 --- a/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic HIPS @K2 Plus-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic HIPS @K2 Plus-all", - "inherits": "fdm_filament_hips", - "from": "system", - "setting_id": "eaR3AeSZnfqfAKaX", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.05" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_type": [ - "HIPS" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFsFon5l" -} \ No newline at end of file + "type": "filament", + "name": "Generic HIPS @K2 Plus-all", + "inherits": "fdm_filament_hips", + "from": "system", + "setting_id": "eaR3AeSZnfqfAKaX", + "filament_id": "OFsFon5l", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.05" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "HIPS" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json index 500722f1e9..ce836188d0 100644 --- a/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Generic PA @Creality Ender-5Max-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Creality Ender-5Max-all", - "inherits": "fdm_filament_common", "renamed_from": "Creality Generic PA @Ender-5Max-all;Creality Generic PA Ender-5Max-all", + "inherits": "fdm_filament_common", "from": "system", "setting_id": "ChQOX6JlKujFwFcB", "filament_id": "OFg8ndtj", @@ -44,7 +44,6 @@ ], "filament_flow_ratio": "0.9", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "PA" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json index 12c3698ca6..2485bd9622 100644 --- a/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K1 Max_CFS-C-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Generic PA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "kJAlbLyNyUBh772X", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "kJAlbLyNyUBh772X", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @K1C-all.json b/resources/profiles/Creality/filament/Generic PA @K1C-all.json index 310dfb7abd..95bc3ec40d 100644 --- a/resources/profiles/Creality/filament/Generic PA @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K1C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PA @K1C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "Y68qR47SYWUENSKm", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K1C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "Y68qR47SYWUENSKm", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json index 0d134ae474..c398f7f3ac 100644 --- a/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K1C_CFS-C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PA @K1C_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "VtABl7yMx0yDOnz0", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K1C_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "VtABl7yMx0yDOnz0", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json index 1396769307..58121767fa 100644 --- a/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K1_CFS-C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PA @K1_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "ivl9C3evnuPMgB0F", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K1_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "ivl9C3evnuPMgB0F", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json index 950b84e7f0..61984bcc11 100644 --- a/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K2 Plus-all.json @@ -1,183 +1,181 @@ { - "type": "filament", - "name": "Generic PA @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "E5tvF6Xpv7jZzLgm", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "E5tvF6Xpv7jZzLgm", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json index c8ddd05024..7eb34e526c 100644 --- a/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K2 Pro-all.json @@ -1,196 +1,194 @@ { - "type": "filament", - "name": "Generic PA @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "0139pzgdlOAScB7g", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.058", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "0139pzgdlOAScB7g", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.058", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA @K2-all.json b/resources/profiles/Creality/filament/Generic PA @K2-all.json index b98aac22a0..8993af315d 100644 --- a/resources/profiles/Creality/filament/Generic PA @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PA @K2-all.json @@ -1,196 +1,194 @@ { - "type": "filament", - "name": "Generic PA @K2-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "gxCrQfCHpKO4p5IT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.12" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.058", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFg8ndtj" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA @K2-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "gxCrQfCHpKO4p5IT", + "filament_id": "OFg8ndtj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.12" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.058", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json index c047fb7774..7ec3b0c3e8 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @K1 Max_CFS-C-all.json @@ -1,152 +1,150 @@ { - "type": "filament", - "name": "Generic PA-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "jEl76gFz2QQyvW6A", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "45" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFQLcbps" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "jEl76gFz2QQyvW6A", + "filament_id": "OFQLcbps", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "45" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json index 360ecbf35b..c4eeb50de9 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @K1C-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Generic PA-CF @K1C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "eGoj7kJxL2NfqY5o", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "45" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFQLcbps" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA-CF @K1C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "eGoj7kJxL2NfqY5o", + "filament_id": "OFQLcbps", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "45" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json index 022474e6f1..ac5d2c00c8 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @K1C_CFS-C-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Generic PA-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "zbiMNXMvHACEqLfK", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "45" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFQLcbps" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "zbiMNXMvHACEqLfK", + "filament_id": "OFQLcbps", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "45" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json index 40586091b0..8e3ed28c4d 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @K1_CFS-C-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Generic PA-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "DB1549abK4ZDVWG2", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "45" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.01", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFQLcbps" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "DB1549abK4ZDVWG2", + "filament_id": "OFQLcbps", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "45" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.01", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json index 0b0042c6c8..f8a9f12be6 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @K2 Plus-all.json @@ -1,182 +1,180 @@ { - "type": "filament", - "name": "Generic PA-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "aBR3ODfDoxJOLx8k", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "45" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFQLcbps" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "aBR3ODfDoxJOLx8k", + "filament_id": "OFQLcbps", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "45" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json index fb65088525..309c16cda1 100644 --- a/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PA12-CF @K2 Plus-all.json @@ -1,182 +1,180 @@ { - "type": "filament", - "name": "Generic PA12-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "rZP36BUTvc68sHWI", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "120" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFM4iJlv" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA12-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "rZP36BUTvc68sHWI", + "filament_id": "OFM4iJlv", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "120" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json index 04260f4d8e..23230df015 100644 --- a/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1 Max_CFS-C-all.json @@ -1,188 +1,186 @@ { - "type": "filament", - "name": "Generic PA6-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "QSCyT35VNEEMhvud", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFhTPf6L" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "QSCyT35VNEEMhvud", + "filament_id": "OFhTPf6L", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json index b141bc04ec..0189d06e7b 100644 --- a/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1C-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "Generic PA6-CF @K1C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "fhFfYR7jZE4EbV0j", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFhTPf6L" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-CF @K1C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "fhFfYR7jZE4EbV0j", + "filament_id": "OFhTPf6L", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json index 6dd6902397..905c209072 100644 --- a/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1C_CFS-C-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "Generic PA6-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "Go0O3gXzk3QyyBGk", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFhTPf6L" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "Go0O3gXzk3QyyBGk", + "filament_id": "OFhTPf6L", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json index 9c70b899f0..f0fc90ad44 100644 --- a/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-CF @K1_CFS-C-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "Generic PA6-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "dOmhoYus5mupLjle", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFhTPf6L" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "dOmhoYus5mupLjle", + "filament_id": "OFhTPf6L", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json index 75cd58773a..dbfa45091c 100644 --- a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Plus-all.json @@ -1,191 +1,189 @@ { - "type": "filament", - "name": "Generic PA6-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "3UftFI9726wU6cBK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFhTPf6L" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "3UftFI9726wU6cBK", + "filament_id": "OFhTPf6L", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json index 6388151090..91f79c1377 100644 --- a/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-CF @K2 Pro-all.json @@ -1,193 +1,191 @@ { - "type": "filament", - "name": "Generic PA6-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "p6hDaLrNJvnvejQv", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "50" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFhTPf6L" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "p6hDaLrNJvnvejQv", + "filament_id": "OFhTPf6L", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "50" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json index 5919945b58..927a1c8016 100644 --- a/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PA6-GF @K2 Plus-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Generic PA6-GF @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "Snwr9UFekvFcj8lx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "42" - ], - "filament_density": [ - "1.2" - ], - "filament_flow_ratio": [ - "0.88" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retraction_length": [ - "0.5" - ], - "filament_type": [ - "PA-GF" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "290" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "60" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "100", - "customized_plate_temp_initial_layer": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFh9u9c0" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA6-GF @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "Snwr9UFekvFcj8lx", + "filament_id": "OFh9u9c0", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "42" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.88" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_type": [ + "PA-GF" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "60" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "100", + "customized_plate_temp_initial_layer": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json index d1decb74cc..f4e776ceae 100644 --- a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Plus-all.json @@ -1,182 +1,180 @@ { - "type": "filament", - "name": "Generic PA612-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "Od0K6cY5fZtDAOOF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.17" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF8eaY7j" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA612-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "Od0K6cY5fZtDAOOF", + "filament_id": "OF8eaY7j", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.17" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json index 5ccb21724d..972a0ccd17 100644 --- a/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PA612-CF @K2 Pro-all.json @@ -1,184 +1,182 @@ { - "type": "filament", - "name": "Generic PA612-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "YZr7lxLJZjL71WzO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.17" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF8eaY7j" -} \ No newline at end of file + "type": "filament", + "name": "Generic PA612-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "YZr7lxLJZjL71WzO", + "filament_id": "OF8eaY7j", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.17" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json index 3e007d79c6..d8b314ffdb 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1 Max_CFS-C-all.json @@ -1,197 +1,195 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "Q6f7jvJqw2gyNBFZ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "Q6f7jvJqw2gyNBFZ", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json index dcc9738515..559df69e3a 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C-all.json @@ -1,198 +1,196 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K1C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "Rt7TNUSJlBGzxbcN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K1C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "Rt7TNUSJlBGzxbcN", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json index 2f5ae88e9d..7d1ea509cb 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1C_CFS-C-all.json @@ -1,198 +1,196 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "CbUS1kiIgsHTZa28", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "CbUS1kiIgsHTZa28", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json index e7ffe11efa..c42e41adf4 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K1_CFS-C-all.json @@ -1,198 +1,196 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "71tO55hudcpbpReV", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "71tO55hudcpbpReV", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json index 8d4157e8cd..05d9ace84a 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Plus-all.json @@ -1,197 +1,195 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "p3nXM3BSnsmS2XHO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "p3nXM3BSnsmS2XHO", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json index a013abb416..d752fdf84d 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K2 Pro-all.json @@ -1,184 +1,182 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "gwXDISorxlzhqE2L", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "100", - "customized_plate_temp_initial_layer": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "gwXDISorxlzhqE2L", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "100", + "customized_plate_temp_initial_layer": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json b/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json index e8032a6b4c..4756391f64 100644 --- a/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PAHT-CF @K2-all.json @@ -1,184 +1,182 @@ { - "type": "filament", - "name": "Generic PAHT-CF @K2-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "OK8a49qQ1ooSpYKe", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "100", - "customized_plate_temp_initial_layer": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFH7b12v" -} \ No newline at end of file + "type": "filament", + "name": "Generic PAHT-CF @K2-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "OK8a49qQ1ooSpYKe", + "filament_id": "OFH7b12v", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "100", + "customized_plate_temp_initial_layer": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json index 67c0d17aa6..65f146c1f4 100644 --- a/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PC @K1 Max_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PC @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "Dh2hSCE4xEmmv601", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "110" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "filament_density": [ - "1.18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLakOUI" -} \ No newline at end of file + "type": "filament", + "name": "Generic PC @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "Dh2hSCE4xEmmv601", + "filament_id": "OFLakOUI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "110" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "filament_density": [ + "1.18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PC @K1C-all.json b/resources/profiles/Creality/filament/Generic PC @K1C-all.json index 30bb957e88..fc13d05730 100644 --- a/resources/profiles/Creality/filament/Generic PC @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PC @K1C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PC @K1C-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "KWaWn7qw5WFhxP6u", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "110" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "filament_density": [ - "1.18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFLakOUI" -} \ No newline at end of file + "type": "filament", + "name": "Generic PC @K1C-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "KWaWn7qw5WFhxP6u", + "filament_id": "OFLakOUI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "110" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "filament_density": [ + "1.18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json index 450b46b2af..19b0ebd6e6 100644 --- a/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PC @K1C_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PC @K1C_CFS-C-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "YXZbtzq7xTHm1L1k", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "110" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "filament_density": [ - "1.18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLakOUI" -} \ No newline at end of file + "type": "filament", + "name": "Generic PC @K1C_CFS-C-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "YXZbtzq7xTHm1L1k", + "filament_id": "OFLakOUI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "110" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "filament_density": [ + "1.18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json index 353610592a..9788c706b6 100644 --- a/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PC @K1_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PC @K1_CFS-C-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "ZzPtJF9WrqfZa29N", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "110" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "filament_density": [ - "1.18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLakOUI" -} \ No newline at end of file + "type": "filament", + "name": "Generic PC @K1_CFS-C-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "ZzPtJF9WrqfZa29N", + "filament_id": "OFLakOUI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "110" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "filament_density": [ + "1.18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json index e4a1d358f7..5a489077b9 100644 --- a/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PC @K2 Plus-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PC @K2 Plus-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "3knMGS1s49r6Z9eL", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "110" - ], - "cool_plate_temp_initial_layer": [ - "110" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFLakOUI" -} \ No newline at end of file + "type": "filament", + "name": "Generic PC @K2 Plus-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "3knMGS1s49r6Z9eL", + "filament_id": "OFLakOUI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "110" + ], + "cool_plate_temp_initial_layer": [ + "110" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json index 99c3232a10..d2e6e6bc9c 100644 --- a/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PC @K2 Pro-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Generic PC @K2 Pro-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "CSAIxm75n407CqTG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "1.18" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFLakOUI" -} \ No newline at end of file + "type": "filament", + "name": "Generic PC @K2 Pro-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "CSAIxm75n407CqTG", + "filament_id": "OFLakOUI", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.18" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json index c84c58a220..c83a904526 100644 --- a/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PCTG @K2 Plus-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic PCTG @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "zmSP0G2uQvugDqZs", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PCTG" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.13", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFu1evlr" -} \ No newline at end of file + "type": "filament", + "name": "Generic PCTG @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "zmSP0G2uQvugDqZs", + "filament_id": "OFu1evlr", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PCTG" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.13", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json index 047bacd756..e50ac427e6 100644 --- a/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K1 Max_CFS-C-all.json @@ -1,188 +1,186 @@ { - "type": "filament", - "name": "Generic PET @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "rbuxBWsJ43mXgEIi", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "rbuxBWsJ43mXgEIi", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K1C-all.json b/resources/profiles/Creality/filament/Generic PET @K1C-all.json index ae435635dd..c07ef2c0d9 100644 --- a/resources/profiles/Creality/filament/Generic PET @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K1C-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "Generic PET @K1C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "yblsYcRQlWMPyE2X", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K1C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "yblsYcRQlWMPyE2X", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json index 93e9cd11f0..cb81e6743c 100644 --- a/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K1C_CFS-C-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "Generic PET @K1C_CFS-C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "Yhi1n5iQJpQPQQAp", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K1C_CFS-C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "Yhi1n5iQJpQPQQAp", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json index 4e860053d9..0dca9e321e 100644 --- a/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K1_CFS-C-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "Generic PET @K1_CFS-C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "HrEHGzilsq8F3ne7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K1_CFS-C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "HrEHGzilsq8F3ne7", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json index cf56f3c9af..6ea61d280b 100644 --- a/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K2 Plus-all.json @@ -1,192 +1,190 @@ { - "type": "filament", - "name": "Generic PET @K2 Plus-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "OFMSlAPXoITrhmPG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K2 Plus-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "OFMSlAPXoITrhmPG", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json index 4da77efe33..8d19366d15 100644 --- a/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K2 Pro-all.json @@ -1,193 +1,191 @@ { - "type": "filament", - "name": "Generic PET @K2 Pro-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "fIxga8QpAboN7reJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.13", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K2 Pro-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "fIxga8QpAboN7reJ", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.13", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET @K2-all.json b/resources/profiles/Creality/filament/Generic PET @K2-all.json index ef761807b0..13dbc77901 100644 --- a/resources/profiles/Creality/filament/Generic PET @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PET @K2-all.json @@ -1,193 +1,191 @@ { - "type": "filament", - "name": "Generic PET @K2-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "K7DNfNNpWlGriQip", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF6MOPWx" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET @K2-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "K7DNfNNpWlGriQip", + "filament_id": "OF6MOPWx", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json index 4c9fadfbc6..55792e2c7d 100644 --- a/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PET-CF @K1 Max_CFS-C-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "Generic PET-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "iAykK8PMYs9LdxrP", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFQdaVZS" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "iAykK8PMYs9LdxrP", + "filament_id": "OFQdaVZS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json index e98f8773a6..e8a239cf78 100644 --- a/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PET-CF @K1C-all.json @@ -1,177 +1,175 @@ { - "type": "filament", - "name": "Generic PET-CF @K1C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "WhGF57kMBW9hM9zv", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFQdaVZS" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET-CF @K1C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "WhGF57kMBW9hM9zv", + "filament_id": "OFQdaVZS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json index 36c9dc92a6..87742e819e 100644 --- a/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PET-CF @K1C_CFS-C-all.json @@ -1,177 +1,175 @@ { - "type": "filament", - "name": "Generic PET-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "IiR1UEHx5RrOeAWM", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFQdaVZS" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "IiR1UEHx5RrOeAWM", + "filament_id": "OFQdaVZS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json index c1955e0667..db7b7602d8 100644 --- a/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PET-CF @K1_CFS-C-all.json @@ -1,177 +1,175 @@ { - "type": "filament", - "name": "Generic PET-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "2a9xvwlw1X0qsA26", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFQdaVZS" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "2a9xvwlw1X0qsA26", + "filament_id": "OFQdaVZS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json index 44eb974cdf..d35cb1556c 100644 --- a/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PET-CF @K2 Plus-all.json @@ -1,195 +1,193 @@ { - "type": "filament", - "name": "Generic PET-CF @K2 Plus-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "srmb3jsHHpFDnfsp", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "40", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.034", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFQdaVZS" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET-CF @K2 Plus-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "srmb3jsHHpFDnfsp", + "filament_id": "OFQdaVZS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "40", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.034", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json index ddfb603d30..30a47753d0 100644 --- a/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PET-CF @K2 Pro-all.json @@ -1,193 +1,191 @@ { - "type": "filament", - "name": "Generic PET-CF @K2 Pro-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "5tjKAfZmtCNClyrd", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "300" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "40", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFQdaVZS" -} \ No newline at end of file + "type": "filament", + "name": "Generic PET-CF @K2 Pro-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "5tjKAfZmtCNClyrd", + "filament_id": "OFQdaVZS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "40", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json index df6509395f..e9a463bd1a 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Creality Ender-5Max-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Creality Ender-5Max-all", - "inherits": "fdm_filament_common", "renamed_from": "Creality Generic PETG @Ender-5Max-all;Creality Generic PETG Ender-5Max-all", + "inherits": "fdm_filament_common", "from": "system", "setting_id": "TFS4Fi1PuE7WgnPr", "filament_id": "OFYPdQJh", @@ -44,7 +44,6 @@ ], "filament_flow_ratio": "0.85", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "PETG" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json index cbdc915a23..072a4e3f7e 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Ender-3 V4-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic PETG @Ender-3 V4-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "P9ZP95oPCCBeXhGC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "16" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @Ender-3 V4-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "P9ZP95oPCCBeXhGC", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @Hi-all.json b/resources/profiles/Creality/filament/Generic PETG @Hi-all.json index 32b171416b..a36395f952 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Hi-all.json @@ -1,151 +1,149 @@ { - "type": "filament", - "name": "Generic PETG @Hi-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "1N9muT0ILCJ7pdQq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]", - "pressure_advance": "0.078", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @Hi-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "1N9muT0ILCJ7pdQq", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]", + "pressure_advance": "0.078", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json index 40fecf5d33..1666762dad 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K1 Max_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Generic PETG @K1 Max_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "j2R2SrPu6U5fde21", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_type": [ - "PETG" - ], - "filament_wipe": [ - "1" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K1 Max_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "j2R2SrPu6U5fde21", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_type": [ + "PETG" + ], + "filament_wipe": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json index e82036ef1c..c1d8612475 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K1 SE-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PETG @K1 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "ktn07NL2acbf4FzZ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]", - "pressure_advance": "0.086", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K1 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "ktn07NL2acbf4FzZ", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]", + "pressure_advance": "0.086", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json index 649d2057b3..917188d870 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K1 SE_CFS-C-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PETG @K1 SE_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "8isRtWlMhY6f6OTg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]", - "pressure_advance": "0.086", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K1 SE_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "8isRtWlMhY6f6OTg", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,230],[6.0,240],[10.0,240]]", + "pressure_advance": "0.086", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K1C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1C-all.json index 5d05e2a977..2e368f0e59 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K1C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Generic PETG @K1C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "983sxUds4Bih3OCl", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_type": [ - "PETG" - ], - "filament_wipe": [ - "1" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K1C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "983sxUds4Bih3OCl", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_type": [ + "PETG" + ], + "filament_wipe": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json index 7f7459382a..a614803613 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K1C_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Generic PETG @K1C_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "rMTi8mSKdtnzsMbr", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_type": [ - "PETG" - ], - "filament_wipe": [ - "1" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K1C_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "rMTi8mSKdtnzsMbr", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_type": [ + "PETG" + ], + "filament_wipe": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json index 568b5a1cf5..6c81dc803e 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K1_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Generic PETG @K1_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "9Ay01Nq2Dv2SfQVR", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_type": [ - "PETG" - ], - "filament_wipe": [ - "1" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K1_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "9Ay01Nq2Dv2SfQVR", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_type": [ + "PETG" + ], + "filament_wipe": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,235], [1.3,250]]", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json index 6b10eac4c6..4704b0e89c 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K2 Plus-all.json @@ -1,142 +1,140 @@ { - "type": "filament", - "name": "Generic PETG @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "z4vClzn8RViHNLgk", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "z4vClzn8RViHNLgk", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json index 5d007dfff3..d819485f07 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K2 Pro-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Generic PETG @K2 Pro-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "huEA8Ry63opxcD4n", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_type": [ - "PETG" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K2 Pro-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "huEA8Ry63opxcD4n", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_type": [ + "PETG" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,220],[1.1,220],[1.3,250]]", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json index 69af8255c5..1de0675bdb 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K2 SE-all.json @@ -1,152 +1,150 @@ { - "type": "filament", - "name": "Generic PETG @K2 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "awADayXExBihbXgS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K2 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "awADayXExBihbXgS", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @K2-all.json b/resources/profiles/Creality/filament/Generic PETG @K2-all.json index a8e2308613..3d1e74f03b 100644 --- a/resources/profiles/Creality/filament/Generic PETG @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @K2-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Generic PETG @K2-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "7iDx59I7g14YDF8w", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "16" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,250]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @K2-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "7iDx59I7g14YDF8w", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,250]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json index 301fc96ef9..a7c58188b0 100644 --- a/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @SPARKX i7-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "Generic PETG @SPARKX i7-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "5jgqjcjpqHPzxm6H", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "14" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,240],[1.2,250]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OFYPdQJh" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG @SPARKX i7-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "5jgqjcjpqHPzxm6H", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "14" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,240],[1.2,250]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json index 5f03c5b211..38eea406a6 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1 Max_CFS-C-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Generic PETG-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "4aNmHiMKdF9f0qdK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "4aNmHiMKdF9f0qdK", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json index 4044297ea9..43d2d6d056 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PETG-CF @K1C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "J9U6OONEnIpwmjf1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K1C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "J9U6OONEnIpwmjf1", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json index 5c22d3e902..055dc6c674 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1C_CFS-C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PETG-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "WaKz2m5F97gq2Lm2", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "WaKz2m5F97gq2Lm2", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json index 00f8180634..8c516d09b8 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K1_CFS-C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PETG-CF @K1_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "37j0QrLekeU2z2q6", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K1_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "37j0QrLekeU2z2q6", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json index 5ed6aa15ea..eb1bb1e4eb 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Plus-all.json @@ -1,149 +1,147 @@ { - "type": "filament", - "name": "Generic PETG-CF @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "OEzFehmwiMscMC7x", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "OEzFehmwiMscMC7x", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json index a801d09c9b..6c85e2d3e4 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K2 Pro-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Generic PETG-CF @K2 Pro-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "XNo4wgLuyPeOqInw", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K2 Pro-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "XNo4wgLuyPeOqInw", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json index a2b844f80f..72452d8af0 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @K2-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Generic PETG-CF @K2-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "LrzCY2ZsMGzQ9hZW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.26" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @K2-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "LrzCY2ZsMGzQ9hZW", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json index 954782024a..5dd48f17a3 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @SPARKX i7-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PETG-CF @SPARKX i7-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "0UI0C81wu0FTlutg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "90" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,240],[1.2,260]]", - "pressure_advance": "0.024", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFoYSJKi" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-CF @SPARKX i7-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "0UI0C81wu0FTlutg", + "filament_id": "OFoYSJKi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "90" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,240],[1.2,260]]", + "pressure_advance": "0.024", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json index 63dead723c..de7c1c7cbe 100644 --- a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Plus-all.json @@ -1,152 +1,150 @@ { - "type": "filament", - "name": "Generic PETG-GF @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "Bn3MV8VSTFbpxsJK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "17" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "0.5" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG-GF" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFyLWVF3" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-GF @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "Bn3MV8VSTFbpxsJK", + "filament_id": "OFyLWVF3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "17" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG-GF" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json index 5405f7dbcd..fc176da918 100644 --- a/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-GF @K2 Pro-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Generic PETG-GF @K2 Pro-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "Q5qYSWKf0YGbomey", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "17" - ], - "filament_density": [ - "1.28" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-GF" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFyLWVF3" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-GF @K2 Pro-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "Q5qYSWKf0YGbomey", + "filament_id": "OFyLWVF3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "17" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-GF" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json b/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json index 7d52685214..8a5ffa2ac2 100644 --- a/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-GF @K2-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "Generic PETG-GF @K2-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "mirtPgYBmAcUOLCg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "17" - ], - "filament_density": [ - "1.28" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-GF" - ], - "filament_vendor": [ - "Generic" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFyLWVF3" -} \ No newline at end of file + "type": "filament", + "name": "Generic PETG-GF @K2-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "mirtPgYBmAcUOLCg", + "filament_id": "OFyLWVF3", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "17" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-GF" + ], + "filament_vendor": [ + "Generic" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json index ff55c41e81..f4714b8acc 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Creality Ender-5Max-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Creality Ender-5Max-all", - "inherits": "fdm_filament_common", "renamed_from": "Creality Generic PLA @Ender-5Max-all;Creality Generic PLA Ender-5Max-all", + "inherits": "fdm_filament_common", "from": "system", "setting_id": "xGTd14Qwc0JbI6kg", "filament_id": "OFDSrzZ8", @@ -44,7 +44,6 @@ ], "filament_flow_ratio": "0.9", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json index 452c7854ae..9bdc93548b 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Creality Hi-all", - "inherits": "Generic PLA @Creality", "renamed_from": "Creality Generic PLA @Hi-all;Creality Generic PLA Hi-all", + "inherits": "Generic PLA @Creality", "from": "system", "setting_id": "6rwK4GqvNrgaw4kF", "instantiation": "true", @@ -45,9 +45,6 @@ "filament_cooling_moves": [ "4" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -57,9 +54,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json index ce8231d11a..112c869ae8 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Ender-3 V4-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PLA @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "prD5vMrpYGccWzdn", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "prD5vMrpYGccWzdn", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @Hi-all.json b/resources/profiles/Creality/filament/Generic PLA @Hi-all.json index 43bb0786ea..25ca83f1c6 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Hi-all.json @@ -1,142 +1,140 @@ { - "type": "filament", - "name": "Generic PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "eza77EPrdoTvZdw7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.8 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "eza77EPrdoTvZdw7", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json index 315347fc4f..291aca3b0d 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K1 Max_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "Generic PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ARsPmEmVZlsfqy4L", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "45" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "45" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ARsPmEmVZlsfqy4L", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "45" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json index 11bd5fd68a..4b4e3e0125 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K1 SE-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "Generic PLA @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ZzKNiMtyn93fR8Hq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ZzKNiMtyn93fR8Hq", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json index 167ef73d00..60212b6a51 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K1 SE_CFS-C-all.json @@ -1,141 +1,139 @@ { - "type": "filament", - "name": "Generic PLA @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "grHcTUEdjD6jxza1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "grHcTUEdjD6jxza1", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,230]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K1C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1C-all.json index 7cad23ed0e..d242a5b389 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K1C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "Generic PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "qSoHwF6RKEDk9oy0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "45" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "45" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "qSoHwF6RKEDk9oy0", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "45" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json index 50db3c5fb5..80affeffc9 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K1C_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "Generic PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "5oIZY7x0t6ORAd5y", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "45" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "45" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "5oIZY7x0t6ORAd5y", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "45" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json index ddbc57ab8d..ab014109f1 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K1_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "Generic PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "LVSGrfS4cac3vRgQ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "45" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "45" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "LVSGrfS4cac3vRgQ", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "45" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "45" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json index 6514b99d50..530e929d3a 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K2 Plus-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zgZhX3yZ3m9HZ8AF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zgZhX3yZ3m9HZ8AF", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json index 96eafd022b..a4d6fb7509 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K2 Pro-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "umMGfkURWkPH7wY2", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "umMGfkURWkPH7wY2", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json index f8e0beaefe..a229efd77e 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K2 SE-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Generic PLA @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "03mMqzkFvH7rS8wz", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "03mMqzkFvH7rS8wz", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @K2-all.json b/resources/profiles/Creality/filament/Generic PLA @K2-all.json index ee71e52517..ab794d1dec 100644 --- a/resources/profiles/Creality/filament/Generic PLA @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @K2-all.json @@ -1,162 +1,160 @@ { - "type": "filament", - "name": "Generic PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "WD6bTDOOwBE72RaU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190],[1.2,190],[1.5,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "WD6bTDOOwBE72RaU", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190],[1.2,190],[1.5,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json index 07d9aa02e0..bfa143866e 100644 --- a/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "09RAKy1b3XyRqJlV", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; Filament gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.2,210],[0.6,220]]", - "pressure_advance": "0.12", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.2 nozzle", - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OFDSrzZ8" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "09RAKy1b3XyRqJlV", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.2,210],[0.6,220]]", + "pressure_advance": "0.12", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.2 nozzle", + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json index 3fd2827231..92e04c7694 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @Ender-3 V4-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Generic PLA-CF @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "9EtBYoxLtP3BuplP", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,210],[1.2,220]]", - "pressure_advance": "0.028", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "9EtBYoxLtP3BuplP", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,210],[1.2,220]]", + "pressure_advance": "0.028", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json index 698bdc2927..1cddecd143 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1 Max_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "gMlu34zMrx0IX0GY", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "gMlu34zMrx0IX0GY", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json index 57228d8b7f..74e0bd293d 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic PLA-CF @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "kCiZBqAiO5Jc8RgA", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "60" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "kCiZBqAiO5Jc8RgA", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json index 647819f8ea..0757355a82 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1 SE_CFS-C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic PLA-CF @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "dCS3zA3Z3QmsUMav", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "60" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dCS3zA3Z3QmsUMav", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json index ae3aa14a7a..062866dce8 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA-CF @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "6p7VGPRhpUjCVmrs", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "6p7VGPRhpUjCVmrs", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json index 7c1b681b1e..0c4ef3d146 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1C_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "eL5STunwFpRYoNwx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "eL5STunwFpRYoNwx", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json index ab73ebe1ba..088a22bf9c 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K1_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "RGCRo5t8SRI85Oyz", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "RGCRo5t8SRI85Oyz", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json index 381f25f899..f6adbdd926 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Plus-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Generic PLA-CF @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "nZoZ1KL4YYwCdBYo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "nZoZ1KL4YYwCdBYo", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json index f1ce0ce42d..c9a217569f 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2 Pro-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA-CF @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "eXbFz3H9NBjDv3fy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "eXbFz3H9NBjDv3fy", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json index 4dab8f0c8a..f0da0a4507 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2 SE-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "Generic PLA-CF @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "4PnBWB1vn3jXYDcV", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "4PnBWB1vn3jXYDcV", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json index 111ac7470a..e234a96124 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @K2-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic PLA-CF @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Vp7iPE7R08sUpbNM", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Vp7iPE7R08sUpbNM", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json index 4184a05737..3f01d3a846 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @SPARKX i7-all.json @@ -1,183 +1,181 @@ { - "type": "filament", - "name": "Generic PLA-CF @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "KnXh5yN3mZ1zFs7t", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210][1.2,230]]", - "pressure_advance": "0.023", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFWbdGsC" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-CF @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "KnXh5yN3mZ1zFs7t", + "filament_id": "OFWbdGsC", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210][1.2,230]]", + "pressure_advance": "0.023", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json index da5c1ba172..b1f9ee266f 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @Ender-3 V4-all.json @@ -1,147 +1,145 @@ { - "type": "filament", - "name": "Generic PLA-Silk @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "4oKiaxCpzOVuq7JT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "16" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.068", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "4oKiaxCpzOVuq7JT", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.068", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json index a3dfac28d1..c793b2490e 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @Hi-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PLA-Silk @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "yiXBAJwZHe0yW8MN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", - "pressure_advance": "0.026", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "yiXBAJwZHe0yW8MN", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]", + "pressure_advance": "0.026", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json index c7ce2639ae..e0a29c56c5 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 Max_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "a8WrKJxnm4xNe1HK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "a8WrKJxnm4xNe1HK", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json index 418248ed71..4f67885551 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "inmumMkeEas0Maw3", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "inmumMkeEas0Maw3", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "80" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json index 1ba33bf6dc..8f6c7fdadc 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1 SE_CFS-C-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "WaWMHS0yaaoiG98Q", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "80" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "WaWMHS0yaaoiG98Q", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "80" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[12.0,210],[18.0,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json index f37ef16d31..9d1700be22 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "GpGBUE0LBkVKGtO1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "GpGBUE0LBkVKGtO1", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json index 1b4298f035..2b2d9151a3 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1C_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "cZIEiMZQbIcvP57r", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "cZIEiMZQbIcvP57r", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json index f81638a23f..2fe542ff60 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K1_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "jJ8kRNXq2iz98qTh", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "jJ8kRNXq2iz98qTh", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,205], [1.1,205], [1.4,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json index 50f7dac4eb..406d0e71d7 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Plus-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "8DTZKlZEArr9Exd7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "8DTZKlZEArr9Exd7", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json index 2c18b858e8..3c7d1e7373 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 Pro-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "hzbRwh2RichDUBMU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "hzbRwh2RichDUBMU", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json index 8b7030ff73..bbd1c2802e 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2 SE-all.json @@ -1,137 +1,135 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "GdPDY6XouAmn2Sw4", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "GdPDY6XouAmn2Sw4", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json index 5826a18ba9..3806eba238 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @K2-all.json @@ -1,162 +1,160 @@ { - "type": "filament", - "name": "Generic PLA-Silk @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "VhDF33Mt4h0SUIZH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "95" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "VhDF33Mt4h0SUIZH", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "95" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json index e67d570ad4..730f709814 100644 --- a/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-Silk @SPARKX i7-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Generic PLA-Silk @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "veZcyFoa3uiS0oel", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.3,215],[1.6,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFi6PfUM" -} \ No newline at end of file + "type": "filament", + "name": "Generic PLA-Silk @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "veZcyFoa3uiS0oel", + "filament_id": "OFi6PfUM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.3,215],[1.6,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json index 7aec44400e..91c5497f52 100644 --- a/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K1 Max_CFS-C-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "Generic PP @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "SpL486LVpIbISfQj", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PP" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "SpL486LVpIbISfQj", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PP" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K1C-all.json b/resources/profiles/Creality/filament/Generic PP @K1C-all.json index ad01f49d51..a417e0d801 100644 --- a/resources/profiles/Creality/filament/Generic PP @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K1C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic PP @K1C-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "iY30mqnBJOeybNin", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PP" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K1C-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "iY30mqnBJOeybNin", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PP" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json index fb56912bf1..e4d01f17b1 100644 --- a/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K1C_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic PP @K1C_CFS-C-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "27bAcMgt0jDcUvLF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PP" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K1C_CFS-C-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "27bAcMgt0jDcUvLF", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PP" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json index 88acdf3d32..bc2e1342f4 100644 --- a/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K1_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic PP @K1_CFS-C-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "8c9klBh6C7O76Lgc", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PP" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K1_CFS-C-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "8c9klBh6C7O76Lgc", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PP" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json index e34d70a902..9c04230e2a 100644 --- a/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K2 Plus-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PP @K2 Plus-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "sevgawCx7xvOFLXm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "PP" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K2 Plus-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "sevgawCx7xvOFLXm", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "PP" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json index e3167109d8..df4168d24e 100644 --- a/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K2 Pro-all.json @@ -1,142 +1,140 @@ { - "type": "filament", - "name": "Generic PP @K2 Pro-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "bAxYHHsv8COKiIFG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PP" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "45", - "customized_plate_temp_initial_layer": "45", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "35", - "epoxy_resin_plate_temp_initial_layer": "35", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K2 Pro-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "bAxYHHsv8COKiIFG", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PP" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "45", + "customized_plate_temp_initial_layer": "45", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "35", + "epoxy_resin_plate_temp_initial_layer": "35", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP @K2-all.json b/resources/profiles/Creality/filament/Generic PP @K2-all.json index 8f0075422c..5b033c2bb7 100644 --- a/resources/profiles/Creality/filament/Generic PP @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PP @K2-all.json @@ -1,142 +1,140 @@ { - "type": "filament", - "name": "Generic PP @K2-all", - "inherits": "fdm_filament_pp", - "from": "system", - "setting_id": "dMhTxpF3ipepME4p", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "0.91" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PP" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "45", - "customized_plate_temp_initial_layer": "45", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "35", - "epoxy_resin_plate_temp_initial_layer": "35", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.08", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF1UNk9P" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP @K2-all", + "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "dMhTxpF3ipepME4p", + "filament_id": "OF1UNk9P", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "0.91" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PP" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "45", + "customized_plate_temp_initial_layer": "45", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "35", + "epoxy_resin_plate_temp_initial_layer": "35", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.08", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json index e557ac36e4..53df078b03 100644 --- a/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PP-CF @K2 Plus-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic PP-CF @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "lHJWTFXiSKzWrX1A", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "60" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "23" - ], - "filament_density": [ - "1.01" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PP-CF" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFXkm8q1" -} \ No newline at end of file + "type": "filament", + "name": "Generic PP-CF @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "lHJWTFXiSKzWrX1A", + "filament_id": "OFXkm8q1", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "23" + ], + "filament_density": [ + "1.01" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PP-CF" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json index 01f7c52bc9..68a2c3a2d9 100644 --- a/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS @K1 Max_CFS-C-all.json @@ -1,173 +1,171 @@ { - "type": "filament", - "name": "Generic PPS @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "OCjDOWQ5tgZgZB0R", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.38" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "320" - ], - "nozzle_temperature_initial_layer": [ - "320" - ], - "nozzle_temperature_range_high": [ - "350" - ], - "nozzle_temperature_range_low": [ - "320" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFq9svOz" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "OCjDOWQ5tgZgZB0R", + "filament_id": "OFq9svOz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.38" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "320" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS @K1C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1C-all.json index 39a3449351..e29921dab2 100644 --- a/resources/profiles/Creality/filament/Generic PPS @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS @K1C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic PPS @K1C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "9HAL1MdIgM7fyklo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.38" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "320" - ], - "nozzle_temperature_initial_layer": [ - "320" - ], - "nozzle_temperature_range_high": [ - "350" - ], - "nozzle_temperature_range_low": [ - "320" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFq9svOz" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS @K1C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "9HAL1MdIgM7fyklo", + "filament_id": "OFq9svOz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.38" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "320" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json index af12995572..440948c387 100644 --- a/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS @K1C_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic PPS @K1C_CFS-C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "DVtMTnkEsr8o5Vzh", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.38" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "320" - ], - "nozzle_temperature_initial_layer": [ - "320" - ], - "nozzle_temperature_range_high": [ - "350" - ], - "nozzle_temperature_range_low": [ - "320" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFq9svOz" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS @K1C_CFS-C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "DVtMTnkEsr8o5Vzh", + "filament_id": "OFq9svOz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.38" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "320" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json index dd22fcf107..6b2cd34fc7 100644 --- a/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS @K1_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic PPS @K1_CFS-C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "2HTODPgc4aIZ3XG8", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.38" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "320" - ], - "nozzle_temperature_initial_layer": [ - "320" - ], - "nozzle_temperature_range_high": [ - "350" - ], - "nozzle_temperature_range_low": [ - "320" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFq9svOz" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS @K1_CFS-C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "2HTODPgc4aIZ3XG8", + "filament_id": "OFq9svOz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.38" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "320" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json index deff12cad5..a48497fb88 100644 --- a/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PPS @K2 Plus-all.json @@ -1,151 +1,149 @@ { - "type": "filament", - "name": "Generic PPS @K2 Plus-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "nGEhRfiizC0emg2M", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.38" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "310" - ], - "nozzle_temperature_initial_layer": [ - "310" - ], - "nozzle_temperature_range_high": [ - "350" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_threshold": [ - "0%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFq9svOz" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS @K2 Plus-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "nGEhRfiizC0emg2M", + "filament_id": "OFq9svOz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.38" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "310" + ], + "nozzle_temperature_initial_layer": [ + "310" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_threshold": [ + "0%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json index f07eed6f9a..c845f5cc04 100644 --- a/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1 Max_CFS-C-all.json @@ -1,173 +1,171 @@ { - "type": "filament", - "name": "Generic PPS-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "Lo64lIBBBOVC7X0f", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "130" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "305" - ], - "nozzle_temperature_initial_layer": [ - "305" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "305" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF6rdQ6M" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "Lo64lIBBBOVC7X0f", + "filament_id": "OF6rdQ6M", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "130" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "305" + ], + "nozzle_temperature_initial_layer": [ + "305" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "305" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json index 78f5a33e87..69ea7be859 100644 --- a/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic PPS-CF @K1C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "IGMvRXBFMXKpLJmO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "130" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "305" - ], - "nozzle_temperature_initial_layer": [ - "305" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "305" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OF6rdQ6M" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS-CF @K1C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "IGMvRXBFMXKpLJmO", + "filament_id": "OF6rdQ6M", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "130" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "305" + ], + "nozzle_temperature_initial_layer": [ + "305" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "305" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json index 8975f9792c..dc0e63e0b1 100644 --- a/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1C_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic PPS-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "TaXzrJiCydy8MS3f", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "130" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "305" - ], - "nozzle_temperature_initial_layer": [ - "305" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "305" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF6rdQ6M" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "TaXzrJiCydy8MS3f", + "filament_id": "OF6rdQ6M", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "130" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "305" + ], + "nozzle_temperature_initial_layer": [ + "305" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "305" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json index 11b1b3a155..4d4d30a0a7 100644 --- a/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PPS-CF @K1_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic PPS-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "KqN1ZnjnbBaLjVK5", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "130" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.926" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PPS-CF" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "305" - ], - "nozzle_temperature_initial_layer": [ - "305" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "305" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "3" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF6rdQ6M" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "KqN1ZnjnbBaLjVK5", + "filament_id": "OF6rdQ6M", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "130" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.926" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "305" + ], + "nozzle_temperature_initial_layer": [ + "305" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "305" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "3" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json index 3bbcf8f992..e45f769de2 100644 --- a/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PPS-CF @K2 Plus-all.json @@ -1,144 +1,142 @@ { - "type": "filament", - "name": "Generic PPS-CF @K2 Plus-all", - "inherits": "fdm_filament_pps", - "from": "system", - "setting_id": "tIoEmhVZ47jiEg2Q", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "105" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "130" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PPS-CF" - ], - "hot_plate_temp": [ - "105" - ], - "hot_plate_temp_initial_layer": [ - "105" - ], - "nozzle_temperature": [ - "310" - ], - "nozzle_temperature_initial_layer": [ - "310" - ], - "nozzle_temperature_range_high": [ - "350" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "105" - ], - "textured_plate_temp_initial_layer": [ - "105" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.058", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF6rdQ6M" -} \ No newline at end of file + "type": "filament", + "name": "Generic PPS-CF @K2 Plus-all", + "inherits": "fdm_filament_pps", + "from": "system", + "setting_id": "tIoEmhVZ47jiEg2Q", + "filament_id": "OF6rdQ6M", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "105" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "130" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PPS-CF" + ], + "hot_plate_temp": [ + "105" + ], + "hot_plate_temp_initial_layer": [ + "105" + ], + "nozzle_temperature": [ + "310" + ], + "nozzle_temperature_initial_layer": [ + "310" + ], + "nozzle_temperature_range_high": [ + "350" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "105" + ], + "textured_plate_temp_initial_layer": [ + "105" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.058", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @Hi-all.json b/resources/profiles/Creality/filament/Generic PVA @Hi-all.json index 6fdad0ad0b..ff30a27f95 100644 --- a/resources/profiles/Creality/filament/Generic PVA @Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @Hi-all.json @@ -1,136 +1,134 @@ { - "type": "filament", - "name": "Generic PVA @Hi-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "M3oK19GPHF4pXnE1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "60" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @Hi-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "M3oK19GPHF4pXnE1", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json index ba02942df2..a2bb83f510 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K1 Max_CFS-C-all.json @@ -1,128 +1,126 @@ { - "type": "filament", - "name": "Generic PVA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "GVvpekUbUn6UPw2h", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "GVvpekUbUn6UPw2h", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K1C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1C-all.json index 34d0a7231d..2f949f1e05 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K1C-all.json @@ -1,129 +1,127 @@ { - "type": "filament", - "name": "Generic PVA @K1C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "DnCH1X6KBNi1m0LO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K1C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "DnCH1X6KBNi1m0LO", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json index 607cf3b0dd..6e9b038448 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K1C_CFS-C-all.json @@ -1,129 +1,127 @@ { - "type": "filament", - "name": "Generic PVA @K1C_CFS-C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "16V0liTfFopXs9hz", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K1C_CFS-C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "16V0liTfFopXs9hz", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json index e5eff7fb64..b698258f50 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K1_CFS-C-all.json @@ -1,129 +1,127 @@ { - "type": "filament", - "name": "Generic PVA @K1_CFS-C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "tomLVSBIaoZzTLo0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K1_CFS-C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "tomLVSBIaoZzTLo0", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json index a4499aa85d..c34bf5aa64 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K2 Plus-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "Generic PVA @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "rCyivt0j7lJ11Obc", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "60" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "rCyivt0j7lJ11Obc", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json index 9cf5bfd6bc..c6c4771162 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K2 Pro-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Generic PVA @K2 Pro-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "Q3FPysmnAH6EI5QJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "50" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K2 Pro-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "Q3FPysmnAH6EI5QJ", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic PVA @K2-all.json b/resources/profiles/Creality/filament/Generic PVA @K2-all.json index d69eab7457..246340a80c 100644 --- a/resources/profiles/Creality/filament/Generic PVA @K2-all.json +++ b/resources/profiles/Creality/filament/Generic PVA @K2-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Generic PVA @K2-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "8ZOmE6qGjxxL8H0b", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "50" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "80" - ], - "filament_density": [ - "1.37" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "225" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFDvXujf" -} \ No newline at end of file + "type": "filament", + "name": "Generic PVA @K2-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "8ZOmE6qGjxxL8H0b", + "filament_id": "OFDvXujf", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "50" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "80" + ], + "filament_density": [ + "1.37" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "225" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json index a59be37173..f862a9cefd 100644 --- a/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic Support for PA @K2 Plus-all.json @@ -1,179 +1,177 @@ { - "type": "filament", - "name": "Generic Support for PA @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "jqyOG2srSFDU3HCN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "38" - ], - "filament_density": [ - "1.17" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "0%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.034", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFDtop41" -} \ No newline at end of file + "type": "filament", + "name": "Generic Support for PA @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "jqyOG2srSFDU3HCN", + "filament_id": "OFDtop41", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "38" + ], + "filament_density": [ + "1.17" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "0%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.034", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json index 5135c5ee68..e70cab2e96 100644 --- a/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic Support for PLA @K2 Plus-all.json @@ -1,162 +1,160 @@ { - "type": "filament", - "name": "Generic Support for PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "W6AEYBcheMyorkN1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "60" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "36" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFin64Qg" -} \ No newline at end of file + "type": "filament", + "name": "Generic Support for PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "W6AEYBcheMyorkN1", + "filament_id": "OFin64Qg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "60" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "36" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json index da1860ce3c..8351d1d3db 100644 --- a/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic TPU 64D @K2 Plus-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Generic TPU 64D @K2 Plus-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "0qV6lVuaNDT3U2HK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "0" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFF3cuzT" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU 64D @K2 Plus-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "0qV6lVuaNDT3U2HK", + "filament_id": "OFF3cuzT", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json index 54d1fd6680..2cbfbc8335 100644 --- a/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic TPU 64D @SPARKX i7-all.json @@ -1,185 +1,183 @@ { - "type": "filament", - "name": "Generic TPU 64D @SPARKX i7-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "MCElfOpYpjeuwZju", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "40" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "0" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1.1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "215" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.28", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFF3cuzT" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU 64D @SPARKX i7-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "MCElfOpYpjeuwZju", + "filament_id": "OFF3cuzT", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "215" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.28", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json b/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json index 62f4916a99..c90e9ddcd4 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @Creality Ender-5Max-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Creality Ender-5Max-all", - "inherits": "fdm_filament_common", "renamed_from": "Creality Generic TPU @Ender-5Max-all;Creality Generic TPU Ender-5Max-all", + "inherits": "fdm_filament_common", "from": "system", "setting_id": "XqW2iYrRTVlXuCwD", "filament_id": "OFgbpcy9", @@ -44,7 +44,6 @@ ], "filament_flow_ratio": "1", "filament_is_support": "0", - "filament_load_time": "0", "filament_loading_speed": "28", "filament_loading_speed_start": "3", "filament_max_volumetric_speed": [ @@ -74,7 +73,6 @@ "filament_type": [ "TPU" ], - "filament_unload_time": "0", "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "filament_vendor": [ diff --git a/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json index 18e8caacda..6daccee813 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @Ender-3 V4-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Generic TPU @Ender-3 V4-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "iJozGH7KvOHz8smj", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.46", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @Ender-3 V4-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "iJozGH7KvOHz8smj", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.46", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json index 0e093087d3..a1bc6f0e61 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K1 Max_CFS-C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Generic TPU @K1 Max_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "h9xCBpYO0jR5I5PG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K1 Max_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "h9xCBpYO0jR5I5PG", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json b/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json index 12f548e797..b8083ab997 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K1 SE-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic TPU @K1 SE-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "euSJIgcrA95IBrYT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.4", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.8", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K1 SE-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "euSJIgcrA95IBrYT", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.4", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.8", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json index c7aa82e060..d3bf797574 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K1 SE_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Generic TPU @K1 SE_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "nHZN4EVW9T6dcG2v", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.4", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.8", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K1 SE_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "nHZN4EVW9T6dcG2v", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.4", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.8", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K1C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1C-all.json index 4d77ed28a7..36e01b8138 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K1C-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K1C-all.json @@ -1,151 +1,149 @@ { - "type": "filament", - "name": "Generic TPU @K1C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "170MDhVcDn1dM9eK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K1C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "170MDhVcDn1dM9eK", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json index 4c29062659..a62959b7e3 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K1C_CFS-C-all.json @@ -1,151 +1,149 @@ { - "type": "filament", - "name": "Generic TPU @K1C_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "XyaRiGJD4khUkwUe", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K1C_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "XyaRiGJD4khUkwUe", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json index 88523dd930..2b0def8d3f 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K1_CFS-C-all.json @@ -1,151 +1,149 @@ { - "type": "filament", - "name": "Generic TPU @K1_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "5e2FELlHtgaCc0K3", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K1_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "5e2FELlHtgaCc0K3", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "0" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json b/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json index a06cdec298..b1b97a4e9a 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K2 Plus-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Generic TPU @K2 Plus-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "kcwtAbqZkxRwtCE3", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.3", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K2 Plus-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "kcwtAbqZkxRwtCE3", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.3", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json b/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json index 07e97acb84..f30cb1b863 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K2 Pro-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic TPU @K2 Pro-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "AZzxNf1i5qruVcBL", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.3", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K2 Pro-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "AZzxNf1i5qruVcBL", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.3", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json b/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json index 8793fc167e..237974d0ae 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K2 SE-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "Generic TPU @K2 SE-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "pjhl2ytSAdJgb8tc", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.4", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K2 SE-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "pjhl2ytSAdJgb8tc", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.4", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @K2-all.json b/resources/profiles/Creality/filament/Generic TPU @K2-all.json index 03d44388f5..5b72422498 100644 --- a/resources/profiles/Creality/filament/Generic TPU @K2-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @K2-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Generic TPU @K2-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "sjSoPLBLcYw8AJKV", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.3", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @K2-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "sjSoPLBLcYw8AJKV", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.3", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json b/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json index c1d0268024..9bcc5709be 100644 --- a/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @SPARKX i7-all.json @@ -1,172 +1,170 @@ { - "type": "filament", - "name": "Generic TPU @SPARKX i7-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "v6uEvu5qbKX9kE7T", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "40" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1.1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFgbpcy9" -} \ No newline at end of file + "type": "filament", + "name": "Generic TPU @SPARKX i7-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "v6uEvu5qbKX9kE7T", + "filament_id": "OFgbpcy9", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json index e300daac38..c6e0cee888 100644 --- a/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1 Max_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "HP Ultra PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "mNVwdo8Tu3M8MAMQ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCJpR7a" -} \ No newline at end of file + "type": "filament", + "name": "HP Ultra PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "mNVwdo8Tu3M8MAMQ", + "filament_id": "OFCJpR7a", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json index d437c91d60..a960581182 100644 --- a/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "HP Ultra PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "7mN3GsHHQb2sziH9", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFCJpR7a" -} \ No newline at end of file + "type": "filament", + "name": "HP Ultra PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "7mN3GsHHQb2sziH9", + "filament_id": "OFCJpR7a", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json index 2c354d95bc..933b225962 100644 --- a/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1C_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "HP Ultra PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "xYIC2SFJ9IeGcVuC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCJpR7a" -} \ No newline at end of file + "type": "filament", + "name": "HP Ultra PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "xYIC2SFJ9IeGcVuC", + "filament_id": "OFCJpR7a", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json index db920a7f56..326ae95b43 100644 --- a/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP Ultra PLA @K1_CFS-C-all.json @@ -1,160 +1,158 @@ { - "type": "filament", - "name": "HP Ultra PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "HfPCXm8gwCtZnkjJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCJpR7a" -} \ No newline at end of file + "type": "filament", + "name": "HP Ultra PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "HfPCXm8gwCtZnkjJ", + "filament_id": "OFCJpR7a", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json index 8f912cf729..fb92b41577 100644 --- a/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/HP Ultra PLA @K2 Plus-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "HP Ultra PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "yHu1ZjX5BoH8dw5z", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFCJpR7a" -} \ No newline at end of file + "type": "filament", + "name": "HP Ultra PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "yHu1ZjX5BoH8dw5z", + "filament_id": "OFCJpR7a", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json index 16810d1886..92f0630114 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K1 Max_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "HP-ASA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "RInV2wT54da08tvW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "100", - "epoxy_resin_plate_temp_initial_layer": "100", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.046", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "RInV2wT54da08tvW", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "100", + "epoxy_resin_plate_temp_initial_layer": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.046", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K1C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1C-all.json index c720b4d1b0..abf38f523a 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K1C-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K1C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "HP-ASA @K1C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "Iw7dIqafCnOnBgDE", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "100", - "epoxy_resin_plate_temp_initial_layer": "100", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.046", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K1C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "Iw7dIqafCnOnBgDE", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "100", + "epoxy_resin_plate_temp_initial_layer": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.046", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json index 01a49e2392..bb6bc6e1bd 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K1C_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "HP-ASA @K1C_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "A5zG0GNhQnOlhTOU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "100", - "epoxy_resin_plate_temp_initial_layer": "100", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.046", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K1C_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "A5zG0GNhQnOlhTOU", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "100", + "epoxy_resin_plate_temp_initial_layer": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.046", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json index d3a45386ad..50c39a8f96 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K1_CFS-C-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "HP-ASA @K1_CFS-C-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "umNqcyYhx49DC2Ki", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "100", - "epoxy_resin_plate_temp_initial_layer": "100", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.046", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K1_CFS-C-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "umNqcyYhx49DC2Ki", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "100", + "epoxy_resin_plate_temp_initial_layer": "100", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.046", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json index 1b97d61b93..6aadd53bf2 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json @@ -1,179 +1,177 @@ { - "type": "filament", - "name": "HP-ASA @K2 Plus-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "cH8oKyQX9jde7Bf8", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "40" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K2 Plus-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "cH8oKyQX9jde7Bf8", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json index 33a4406fdd..e4c917d083 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K2 Pro-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "HP-ASA @K2 Pro-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "HxNkP2GYbTD7yrUZ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "40" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K2 Pro-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "HxNkP2GYbTD7yrUZ", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json index f29ffdd702..3ef8e7467e 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K2 SE-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "HP-ASA @K2 SE-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "TbIud8JJSMQ0nYz0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K2 SE-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "TbIud8JJSMQ0nYz0", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-ASA @K2-all.json b/resources/profiles/Creality/filament/HP-ASA @K2-all.json index 2d38575630..da6c53d8a3 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K2-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K2-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "HP-ASA @K2-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "j9EXhFUKSE3c2awm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "40" - ], - "filament_cost": [ - "29" - ], - "filament_density": [ - "1.15" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "20" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFPHLnoe" -} \ No newline at end of file + "type": "filament", + "name": "HP-ASA @K2-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "j9EXhFUKSE3c2awm", + "filament_id": "OFPHLnoe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "29" + ], + "filament_density": [ + "1.15" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "20" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json b/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json index 9d7767c4d8..87a84f8781 100644 --- a/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @Ender-3 V4-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "HP-TPU @Ender-3 V4-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "x7fQ7w2dCpvVfOLw", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "28" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.36", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @Ender-3 V4-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "x7fQ7w2dCpvVfOLw", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "28" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.36", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @Hi-all.json b/resources/profiles/Creality/filament/HP-TPU @Hi-all.json index c9b6766149..fa70245521 100644 --- a/resources/profiles/Creality/filament/HP-TPU @Hi-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @Hi-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "HP-TPU @Hi-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "x5v3sNNZYWbPIsPN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.36", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @Hi-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "x5v3sNNZYWbPIsPN", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.36", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json index 079dfebfe2..402f2ee5aa 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K1 Max_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "HP-TPU @K1 Max_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "eY1DCIW7WyTnmRYP", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.32", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K1 Max_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "eY1DCIW7WyTnmRYP", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.32", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json b/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json index 7e5935cdf7..10df3a7aac 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K1 SE-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "HP-TPU @K1 SE-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "3YN3jfV75qyfUZWm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "28" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3.5" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Auto Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "215" - ], - "nozzle_temperature_initial_layer": [ - "215" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.4", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K1 SE-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "3YN3jfV75qyfUZWm", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "28" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3.5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Auto Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.4", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json index 62184e78e3..5c684617fd 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K1 SE_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "HP-TPU @K1 SE_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "WnGZuBiSGSoGru8C", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cost": [ - "28" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3.5" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Auto Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "215" - ], - "nozzle_temperature_initial_layer": [ - "215" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.4", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K1 SE_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "WnGZuBiSGSoGru8C", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cost": [ + "28" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3.5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Auto Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.4", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K1C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1C-all.json index 6762f0d2d4..b05e59eef3 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K1C-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K1C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "HP-TPU @K1C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "USI47rUnoJXanAFI", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.32", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K1C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "USI47rUnoJXanAFI", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.32", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json index e7534ade92..fbc05c1853 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K1C_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "HP-TPU @K1C_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "rCn7lAeHr77FziYn", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.32", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K1C_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "rCn7lAeHr77FziYn", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.32", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json b/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json index 077936057a..27315ae2b3 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K1_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "HP-TPU @K1_CFS-C-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "N3NDaZzc5XyUm3b1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.32", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K1_CFS-C-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "N3NDaZzc5XyUm3b1", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.32", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json b/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json index 5b979963f0..06c8959858 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K2 Plus-all.json @@ -1,172 +1,170 @@ { - "type": "filament", - "name": "HP-TPU @K2 Plus-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "CNm35YCN42NAgbU1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K2 Plus-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "CNm35YCN42NAgbU1", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json b/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json index 90201f7dcf..5207b1fb9a 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K2 Pro-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "HP-TPU @K2 Pro-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "tfrclH3VqZ4nPzi7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle", - "Creality K2 Pro 0.6 nozzle", - "Creality K2 Pro 0.8 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K2 Pro-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "tfrclH3VqZ4nPzi7", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle", + "Creality K2 Pro 0.6 nozzle", + "Creality K2 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json b/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json index b3779225c2..27161d5505 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K2 SE-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "HP-TPU @K2 SE-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "IgniOuVC4DtRnxS0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "40" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "filament_cost": [ - "28" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.4", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K2 SE-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "IgniOuVC4DtRnxS0", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "filament_cost": [ + "28" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.4", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[1.2,190],[1.3,220]]", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @K2-all.json b/resources/profiles/Creality/filament/HP-TPU @K2-all.json index 3768b17547..6e2f542b0c 100644 --- a/resources/profiles/Creality/filament/HP-TPU @K2-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @K2-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "HP-TPU @K2-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "l9E5f6JLwfKo4aG9", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "overhang_fan_threshold": [ - "95%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle", - "Creality K2 0.6 nozzle", - "Creality K2 0.8 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @K2-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "l9E5f6JLwfKo4aG9", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "overhang_fan_threshold": [ + "95%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle", + "Creality K2 0.6 nozzle", + "Creality K2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json b/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json index 1d225ec253..fd4b842959 100644 --- a/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/HP-TPU @SPARKX i7-all.json @@ -1,183 +1,181 @@ { - "type": "filament", - "name": "HP-TPU @SPARKX i7-all", - "inherits": "fdm_filament_tpu", - "from": "system", - "setting_id": "oINMsmmxspqPOW8b", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "28" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1.1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "overhang_fan_threshold": [ - "50%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "40", - "customized_plate_temp_initial_layer": "40", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "30", - "epoxy_resin_plate_temp_initial_layer": "30", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.4", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OFGcMkEB" -} \ No newline at end of file + "type": "filament", + "name": "HP-TPU @SPARKX i7-all", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "oINMsmmxspqPOW8b", + "filament_id": "OFGcMkEB", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "28" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "40", + "customized_plate_temp_initial_layer": "40", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "30", + "epoxy_resin_plate_temp_initial_layer": "30", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.4", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json index e4a50b5fec..f0b164f891 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @Ender-3 V4-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Hyper ABS @Ender-3 V4-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "utCV4AwQPV4Ums35", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "90", - "customized_plate_temp_initial_layer": "90", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]", - "pressure_advance": "0.038", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @Ender-3 V4-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "utCV4AwQPV4Ums35", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "90", + "customized_plate_temp_initial_layer": "90", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,240],[0.8,240],[1.0,260]]", + "pressure_advance": "0.038", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json b/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json index bb93a96d02..cea3dbeaf2 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @Hi-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Hyper ABS @Hi-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "LO4MgYNCtAlMyD11", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "70" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @Hi-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "LO4MgYNCtAlMyD11", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "70" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json index 9749f95e35..5ebb98f5ec 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K1 Max_CFS-C-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Hyper ABS @K1 Max_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "PjT9gDai5g9iVBf3", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K1 Max_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "PjT9gDai5g9iVBf3", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json index a303e41640..41d9eb71e1 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K1 SE-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Hyper ABS @K1 SE-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "dWKTm246jz7e4QRy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K1 SE-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "dWKTm246jz7e4QRy", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json index b4780cb82d..2e144ab3f0 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K1 SE_CFS-C-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Hyper ABS @K1 SE_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "GCj4hOsf9S9DqFdh", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K1 SE_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "GCj4hOsf9S9DqFdh", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,20],[6.0,240],[10.0,250]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json index 1ae0bc6ddf..4892e7f33e 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K1C-all.json @@ -1,170 +1,168 @@ { - "type": "filament", - "name": "Hyper ABS @K1C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "DlsL5Ex7MQ54Yje6", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K1C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "DlsL5Ex7MQ54Yje6", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json index 03f8fbc354..a94b9da7d7 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K1C_CFS-C-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Hyper ABS @K1C_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "psgahhKiXE7koRWY", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K1C_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "psgahhKiXE7koRWY", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json index d6c76e777f..3d2ad45efd 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K1_CFS-C-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Hyper ABS @K1_CFS-C-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "YbYUo1FfZlLJg4zm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K1_CFS-C-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "YbYUo1FfZlLJg4zm", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json index 7ecce97627..3b7f42cf81 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Hyper ABS @K2 Plus-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "lGXmZiCrrwfTeERC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K2 Plus-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "lGXmZiCrrwfTeERC", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json index de032398b5..90e79e46fd 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K2 Pro-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Hyper ABS @K2 Pro-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "01z4QYF33KN1OsBM", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K2 Pro-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "01z4QYF33KN1OsBM", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json index c3132a18b5..06a397761f 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K2 SE-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "Hyper ABS @K2 SE-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "X3WH0zaUg8WyahsO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "1" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K2 SE-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "X3WH0zaUg8WyahsO", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper ABS @K2-all.json b/resources/profiles/Creality/filament/Hyper ABS @K2-all.json index 63bf93483d..7b0696e39c 100644 --- a/resources/profiles/Creality/filament/Hyper ABS @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper ABS @K2-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Hyper ABS @K2-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "B0mfi4oxoUIDW2Lv", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF8GnyFU" -} \ No newline at end of file + "type": "filament", + "name": "Hyper ABS @K2-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "B0mfi4oxoUIDW2Lv", + "filament_id": "OF8GnyFU", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json index d4deb0be89..f33623ab68 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @Hi-all.json @@ -1,149 +1,147 @@ { - "type": "filament", - "name": "Hyper L-W PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "snqNKAAquQRA20Ik", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.84" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "3" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "snqNKAAquQRA20Ik", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.84" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "3" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json index 182364977c..6627a67132 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 Max_CFS-C-all.json @@ -1,170 +1,168 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "nhmKUDLK6wxVO1vH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_long_retractions_when_cut": "nil", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_retraction_distances_when_cut": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_stamping_distance": "0", - "filament_stamping_loading_speed": "0", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "idle_temperature": "0", - "material_flow_dependent_temperature": "0", - "pellet_flow_coefficient": "0.4157", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "nhmKUDLK6wxVO1vH", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_long_retractions_when_cut": "nil", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_retraction_distances_when_cut": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_stamping_distance": "0", + "filament_stamping_loading_speed": "0", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "idle_temperature": "0", + "material_flow_dependent_temperature": "0", + "pellet_flow_coefficient": "0.4157", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json index 2bc12a6918..fe2b9f7363 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE-all.json @@ -1,148 +1,146 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "MEaOGHy3pWSd1Gj3", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "MEaOGHy3pWSd1Gj3", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json index 065b9ac77e..8327a3c474 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1 SE_CFS-C-all.json @@ -1,148 +1,146 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "xCioj1jNunIX2GBK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "xCioj1jNunIX2GBK", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json index 872eeca4dc..2e44a0a1e1 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "xye2OhGeKqg44ya7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "xye2OhGeKqg44ya7", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json index 3685dbd854..7aee7bad01 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1C_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "EXxV0Fo4rexuxidn", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "EXxV0Fo4rexuxidn", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json index 718112bd7b..b104bf3181 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K1_CFS-C-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "lfP5u92yfXRedGuy", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.09", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "lfP5u92yfXRedGuy", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.09", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json index df0df361ad..8a6a13f3d5 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Plus-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "U1kZq5P21qnFe5NC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "U1kZq5P21qnFe5NC", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json index cf2c873e77..22fa11fcbd 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K2 Pro-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "4O7avB3eSA1pKDxz", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.76" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "4O7avB3eSA1pKDxz", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.76" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json b/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json index 9b06765831..36aa61a725 100644 --- a/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper L-W PLA @K2-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Hyper L-W PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "gkzTfze1OQmP8zgE", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "48.9" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.85" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF70zbGS" -} \ No newline at end of file + "type": "filament", + "name": "Hyper L-W PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "gkzTfze1OQmP8zgE", + "filament_id": "OF70zbGS", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "48.9" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.85" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json b/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json index 4c39c1ac1a..c73ae6faaf 100644 --- a/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper Luminous @Hi-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Hyper Luminous @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "8PNVp96HmPvjOBVq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "filament_cost": [ - "28.9" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "299", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.052", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle", - "Creality Hi 0.6 nozzle", - "Creality Hi 0.8 nozzle" - ], - "filament_id": "OFC1PzXz" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Luminous @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "8PNVp96HmPvjOBVq", + "filament_id": "OFC1PzXz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "filament_cost": [ + "28.9" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "299", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.052", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle", + "Creality Hi 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json index 53ab1e078e..33bbebc96c 100644 --- a/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper Luminous @K1C-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Hyper Luminous @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "MHaJR8CAtuSwUOIx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "28.9" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,210], [1.2,210], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OFC1PzXz" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Luminous @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "MHaJR8CAtuSwUOIx", + "filament_id": "OFC1PzXz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "28.9" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,210], [1.2,210], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json index 9e267d07cf..c1db54775e 100644 --- a/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper Luminous @K2 Plus-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Luminous @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zY0hIYvTg3v2wyOJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "28.9" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFC1PzXz" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Luminous @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zY0hIYvTg3v2wyOJ", + "filament_id": "OFC1PzXz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "28.9" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json index 67c567791c..04cf190fe5 100644 --- a/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper Luminous @K2 Pro-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Luminous @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "14znq0LtaUx1RUP5", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "28.9" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle", - "Creality K2 Pro 0.6 nozzle", - "Creality K2 Pro 0.8 nozzle" - ], - "filament_id": "OFC1PzXz" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Luminous @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "14znq0LtaUx1RUP5", + "filament_id": "OFC1PzXz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "28.9" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.2,210],[1.5,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle", + "Creality K2 Pro 0.6 nozzle", + "Creality K2 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json b/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json index b5182102e4..d1f28127d9 100644 --- a/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper Luminous @K2-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Luminous @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zD3EOJFcZOuhQHmk", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "28.9" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle", - "Creality K2 0.6 nozzle", - "Creality K2 0.8 nozzle" - ], - "filament_id": "OFC1PzXz" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Luminous @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zD3EOJFcZOuhQHmk", + "filament_id": "OFC1PzXz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "28.9" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle", + "Creality K2 0.6 nozzle", + "Creality K2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json index 9817bd9701..c15cf1eb24 100644 --- a/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper Luminous @SPARKX i7-all.json @@ -1,183 +1,181 @@ { - "type": "filament", - "name": "Hyper Luminous @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "DKQgoZvvkOBsEJCA", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "28.9" - ], - "filament_density": [ - "1.3" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.028", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFC1PzXz" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Luminous @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "DKQgoZvvkOBsEJCA", + "filament_id": "OFC1PzXz", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "28.9" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.028", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json b/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json index 614c8a9ac8..8e9c401520 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @Hi-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Hyper Marble @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "K6SS7X2jvyXsEgaR", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "K6SS7X2jvyXsEgaR", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json index 1fdeb7e4d3..03b8df1632 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K1 Max_CFS-C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "8dYJk1STVIRB2JWw", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "299", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "8dYJk1STVIRB2JWw", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "299", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json index 3430271e86..442f07f967 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K1C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "SWzt8p5UBfgMauNE", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "SWzt8p5UBfgMauNE", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json index f92a629e09..faf5d0decc 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K1C_CFS-C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "gZLo5W0F3NLFCkvg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "gZLo5W0F3NLFCkvg", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json index 0443b606a1..3431ed9ef6 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K1_CFS-C-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "JDAiAZKjxEoWKDwW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "JDAiAZKjxEoWKDwW", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json index 87c217d5db..90d07ec109 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K2 Plus-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "X2fgUYasv7lNEoqK", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "35" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "35" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "3" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "X2fgUYasv7lNEoqK", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "35" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "35" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "3" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json index 90047e7778..5713b0658d 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K2 Pro-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "CITMYaFiwchQ3xoo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "CITMYaFiwchQ3xoo", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json index a0bc0bbfbc..3173e61657 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K2 SE-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "Hyper Marble @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "PyazquNRWsPUM2bt", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "3" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "244", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "PyazquNRWsPUM2bt", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "3" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "244", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @K2-all.json b/resources/profiles/Creality/filament/Hyper Marble @K2-all.json index 09eb2487d3..db38166659 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @K2-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper Marble @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "YxvU7wRdgrtckCa7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "YxvU7wRdgrtckCa7", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json index 746332ab6a..5b053dbfb6 100644 --- a/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper Marble @SPARKX i7-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "Hyper Marble @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "teddd8l8D8ASmYQs", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "23.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFLzx3J4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Marble @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "teddd8l8D8ASmYQs", + "filament_id": "OFLzx3J4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "23.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json index d5d494f3f4..8898401856 100644 --- a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Plus-all.json @@ -1,199 +1,197 @@ { - "type": "filament", - "name": "Hyper PA6-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "ns7xy8v6L92XsDy2", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "45.9" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "290" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFn2GlhY" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PA6-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "ns7xy8v6L92XsDy2", + "filament_id": "OFn2GlhY", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "45.9" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "290" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json index 97f41d5746..3b38cfe77c 100644 --- a/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PA6-CF @K2 Pro-all.json @@ -1,199 +1,197 @@ { - "type": "filament", - "name": "Hyper PA6-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "FNuPosBKWyq79bjR", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "45.9" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "290" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFn2GlhY" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PA6-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "FNuPosBKWyq79bjR", + "filament_id": "OFn2GlhY", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "45.9" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "290" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json index 658908446c..23cdb0975c 100644 --- a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Plus-all.json @@ -1,193 +1,191 @@ { - "type": "filament", - "name": "Hyper PA612-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "2xgxuOoGNlO9lEs4", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "59.9" - ], - "filament_density": [ - "1.03" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "290" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFhkN0a7" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PA612-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "2xgxuOoGNlO9lEs4", + "filament_id": "OFhkN0a7", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "59.9" + ], + "filament_density": [ + "1.03" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "290" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json index 40870d5cd3..08b65aaff2 100644 --- a/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PA612-CF @K2 Pro-all.json @@ -1,193 +1,191 @@ { - "type": "filament", - "name": "Hyper PA612-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "sDTzKRsBAaiOxA5I", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "59.9" - ], - "filament_density": [ - "1.03" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "290" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.048", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFhkN0a7" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PA612-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "sDTzKRsBAaiOxA5I", + "filament_id": "OFhkN0a7", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "59.9" + ], + "filament_density": [ + "1.03" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "290" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.048", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json index 915b8b67d9..9b72dd5cb9 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1 Max_CFS-C-all.json @@ -1,196 +1,194 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "98Dhy7By3Sp6lISa", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "74.9" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "98Dhy7By3Sp6lISa", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "74.9" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json index 3529603ba6..47b8eac520 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C-all.json @@ -1,197 +1,195 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K1C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "SpXh27tlQXEbxDUk", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "74.9" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K1C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "SpXh27tlQXEbxDUk", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "74.9" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json index a2c841f463..c2f554abca 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1C_CFS-C-all.json @@ -1,197 +1,195 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "ShD1PW5HWkjnHXrd", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "74.9" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "ShD1PW5HWkjnHXrd", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "74.9" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json index c597cd9c95..564d6b08e9 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K1_CFS-C-all.json @@ -1,197 +1,195 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "wzYQ0bizO8RDWjSX", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "105" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "74.9" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "wzYQ0bizO8RDWjSX", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "105" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "74.9" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json index 67d0b403cc..57a1904fdd 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Plus-all.json @@ -1,194 +1,192 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "NneN5bFLYVXNPzlM", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "90" - ], - "cool_plate_temp_initial_layer": [ - "90" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "NneN5bFLYVXNPzlM", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "90" + ], + "cool_plate_temp_initial_layer": [ + "90" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json index f7e37afe69..0e9eb9a6c1 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2 Pro-all.json @@ -1,184 +1,182 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "wl8JhmCp9Be3cYMJ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "74.9" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "100", - "customized_plate_temp_initial_layer": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.042", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "wl8JhmCp9Be3cYMJ", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "74.9" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "100", + "customized_plate_temp_initial_layer": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.042", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json index 1f97108309..7077971f51 100644 --- a/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper PAHT-CF @K2-all.json @@ -1,184 +1,182 @@ { - "type": "filament", - "name": "Hyper PAHT-CF @K2-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "jtElnQJxHKLDQSHo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "74.9" - ], - "filament_density": [ - "1.06" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "100", - "customized_plate_temp_initial_layer": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF4APyxe" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PAHT-CF @K2-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "jtElnQJxHKLDQSHo", + "filament_id": "OF4APyxe", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "74.9" + ], + "filament_density": [ + "1.06" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "100", + "customized_plate_temp_initial_layer": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json index 85d5d66252..a1c7e7d72f 100644 --- a/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json @@ -1,171 +1,169 @@ { - "type": "filament", - "name": "Hyper PC @K2 Plus-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "zhN9dkzeJWtsAKj8", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "110" - ], - "cool_plate_temp_initial_layer": [ - "110" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_max_speed": [ - "40" - ], - "filament_cost": [ - "100" - ], - "filament_density": [ - "1.19" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.03", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFUF7oA4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PC @K2 Plus-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "zhN9dkzeJWtsAKj8", + "filament_id": "OFUF7oA4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "110" + ], + "cool_plate_temp_initial_layer": [ + "110" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "100" + ], + "filament_density": [ + "1.19" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.03", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json index 7592b6dbcf..d0d64e7b44 100644 --- a/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PC @K2 Pro-all.json @@ -1,173 +1,171 @@ { - "type": "filament", - "name": "Hyper PC @K2 Pro-all", - "inherits": "fdm_filament_pc", - "from": "system", - "setting_id": "6NMso8XW9632vz5s", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_max_speed": [ - "40" - ], - "filament_cost": [ - "37" - ], - "filament_density": [ - "1.19" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "80" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFUF7oA4" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PC @K2 Pro-all", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "6NMso8XW9632vz5s", + "filament_id": "OFUF7oA4", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "37" + ], + "filament_density": [ + "1.19" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "80" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json index a333d63f3d..0ee32c0b6b 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @Ender-3 V4-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Hyper PETG @Ender-3 V4-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "EDl8nfZRP1T8CBOs", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,230],[1.2,250]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @Ender-3 V4-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "EDl8nfZRP1T8CBOs", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,230],[1.2,250]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json b/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json index 5998e1e8bd..ad9fd276d2 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @Hi-all.json @@ -1,149 +1,147 @@ { - "type": "filament", - "name": "Hyper PETG @Hi-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "ZKLZLxxyjfbdAYZ4", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", - "pressure_advance": "0.066", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @Hi-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "ZKLZLxxyjfbdAYZ4", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", + "pressure_advance": "0.066", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json index 6bd1f3afea..0a066f747d 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K1 Max_CFS-C-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Hyper PETG @K1 Max_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "Bcgdo3fx6xntQ68t", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K1 Max_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "Bcgdo3fx6xntQ68t", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json index 058dfe5bd6..cc22c69934 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K1 SE-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Hyper PETG @K1 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "huvZfn5aMetsY1qr", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", - "pressure_advance": "0.068", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K1 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "huvZfn5aMetsY1qr", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", + "pressure_advance": "0.068", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json index f1ceb825e9..226e28d3b5 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K1 SE_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Hyper PETG @K1 SE_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "cyl9yuFghMkUh21u", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", - "pressure_advance": "0.068", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K1 SE_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "cyl9yuFghMkUh21u", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", + "pressure_advance": "0.068", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json index 175aa8099c..db25402dd2 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K1C-all.json @@ -1,155 +1,153 @@ { - "type": "filament", - "name": "Hyper PETG @K1C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "HYCr4pafWTw3btkg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", - "pressure_advance": "0.072", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K1C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "HYCr4pafWTw3btkg", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", + "pressure_advance": "0.072", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json index be8e2c58f5..f7407295d3 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K1C_CFS-C-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Hyper PETG @K1C_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "6vOJLefZfaXZTSae", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", - "pressure_advance": "0.072", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K1C_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "6vOJLefZfaXZTSae", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", + "pressure_advance": "0.072", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json index 9bf2512abe..ce72e4463d 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K1_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Hyper PETG @K1_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "FeLhYkEwkavAVWlq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", - "pressure_advance": "0.068", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K1_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "FeLhYkEwkavAVWlq", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,220],[5.0,230],[14.0,240],[23.0,250]]", + "pressure_advance": "0.068", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json index 983556224b..18a4380b95 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json @@ -1,149 +1,147 @@ { - "type": "filament", - "name": "Hyper PETG @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "LLehESBAwc7JG1sb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.28" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "74.3" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "LLehESBAwc7JG1sb", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "74.3" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json index 32a8fae98b..ab7da092fd 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K2 Pro-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Hyper PETG @K2 Pro-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "FEZohKnhkTIWLIGo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K2 Pro-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "FEZohKnhkTIWLIGo", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json index cc058c4511..cd1a81f895 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K2 SE-all.json @@ -1,158 +1,156 @@ { - "type": "filament", - "name": "Hyper PETG @K2 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "YKt97IZEOlPbNE45", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]", - "pressure_advance": "0.07", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K2 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "YKt97IZEOlPbNE45", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,240],[1.2,240],[1.3,250]]", + "pressure_advance": "0.07", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2-all.json index 9bbf24c47f..a65c05ac70 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K2-all.json @@ -1,148 +1,146 @@ { - "type": "filament", - "name": "Hyper PETG @K2-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "tA9uY8ONg89tnmBS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @K2-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "tA9uY8ONg89tnmBS", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json index d8db7fd923..6f13c7f91b 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @SPARKX i7-all.json @@ -1,164 +1,162 @@ { - "type": "filament", - "name": "Hyper PETG @SPARKX i7-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "KCinMkKfbIlmgNY5", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,240],[1.2,260]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFujZSdh" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG @SPARKX i7-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "KCinMkKfbIlmgNY5", + "filament_id": "OFujZSdh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,240],[1.2,260]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json index 69662a0296..9eb34dc9bf 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1 Max_CFS-C-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "Xas7n19K71hs4LDE", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "90" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "Xas7n19K71hs4LDE", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "90" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json index 1005d22d7f..8f75ada3bd 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C-all.json @@ -1,139 +1,137 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K1C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "Qb08ZrBwuO8zt4AH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "90" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K1C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "Qb08ZrBwuO8zt4AH", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "90" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json index e9008aede1..452436bc5f 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1C_CFS-C-all.json @@ -1,139 +1,137 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "DoTcUw5GMoTHQg7e", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "90" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "DoTcUw5GMoTHQg7e", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "90" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json index 2358ec054e..57d1162f5c 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K1_CFS-C-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K1_CFS-C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "CcmwXMNgZWg8VguD", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "90" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "80", - "epoxy_resin_plate_temp_initial_layer": "80", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K1_CFS-C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "CcmwXMNgZWg8VguD", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "90" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "80", + "epoxy_resin_plate_temp_initial_layer": "80", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json index 252b6dad9c..cbc2e8a34c 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Plus-all.json @@ -1,142 +1,140 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "DyG4SbAXKKPcZtrz", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "DyG4SbAXKKPcZtrz", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json index 1962c54912..55789a7c2e 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K2 Pro-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K2 Pro-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "kit5JfJiicLJF4zF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K2 Pro-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "kit5JfJiicLJF4zF", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json index 68ae2439d7..953587853c 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @K2-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Hyper PETG-CF @K2-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "sqyA1OhRFwfJdaQC", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "75" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @K2-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "sqyA1OhRFwfJdaQC", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "75" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json index a3ab600254..f0feb6547b 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-CF @SPARKX i7-all.json @@ -1,167 +1,165 @@ { - "type": "filament", - "name": "Hyper PETG-CF @SPARKX i7-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "ysPPxXtL5M7eQwOp", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,240],[1.2,260]]", - "pressure_advance": "0.028", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFusbWjj" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-CF @SPARKX i7-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "ysPPxXtL5M7eQwOp", + "filament_id": "OFusbWjj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || layer_z > first_layer_height)}\n{if (layer_z +0.4 < printable_height) }\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{layer_z } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,240],[1.2,260]]", + "pressure_advance": "0.028", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json index 9fdfe1559b..39f76b7763 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K1C-all.json @@ -1,149 +1,147 @@ { - "type": "filament", - "name": "Hyper PETG-GF @K1C-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "nEDeotPVKPCQe8Nb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-GF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFLgwqp2" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-GF @K1C-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "nEDeotPVKPCQe8Nb", + "filament_id": "OFLgwqp2", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-GF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json index 820b021b9e..ec871d7de8 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Plus-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Hyper PETG-GF @K2 Plus-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "usQ7v9aSP9GkBJlW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-GF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFLgwqp2" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-GF @K2 Plus-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "usQ7v9aSP9GkBJlW", + "filament_id": "OFLgwqp2", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-GF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json index 3129330404..37cf3dfdc2 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K2 Pro-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Hyper PETG-GF @K2 Pro-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "9cVMYbupJs6RNOy7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-GF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFLgwqp2" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-GF @K2 Pro-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "9cVMYbupJs6RNOy7", + "filament_id": "OFLgwqp2", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-GF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json b/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json index eafa06d339..6e883d6663 100644 --- a/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG-GF @K2-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Hyper PETG-GF @K2-all", - "inherits": "fdm_filament_common", - "from": "system", - "setting_id": "LFtfaG6s8REfWmjg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "29.9" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_type": [ - "PETG-GF" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "0" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFLgwqp2" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PETG-GF @K2-all", + "inherits": "fdm_filament_common", + "from": "system", + "setting_id": "LFtfaG6s8REfWmjg", + "filament_id": "OFLgwqp2", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.9" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_type": [ + "PETG-GF" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json index 8fbc885c07..ed04e85cd6 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @Ender-3 V4-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Hyper PLA @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "jO61I2nsJ2yY0WG4", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "jO61I2nsJ2yY0WG4", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,210],[1.0,210],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json b/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json index c5297f78ed..231c96f808 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @Hi-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "Hyper PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "AG1UL48Bof1wFYDF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[2.2,200],[3.0,210],[10.0,215],[23.0,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.2 nozzle", - "Creality Hi 0.4 nozzle", - "Creality Hi 0.6 nozzle", - "Creality Hi 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "AG1UL48Bof1wFYDF", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[2.2,200],[3.0,210],[10.0,215],[23.0,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.2 nozzle", + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle", + "Creality Hi 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json index be08cd5bb4..131fc6166d 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K1 Max_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Hyper PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "lRYhcdi64EmFem40", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "lRYhcdi64EmFem40", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json index 2d764065a5..c9a1c2ec02 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K1 SE-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Hyper PLA @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "w22rt5ipwYogeRyf", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.038", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle", - "Creality K1 SE 0.6 nozzle", - "Creality K1 SE 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "w22rt5ipwYogeRyf", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.038", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle", + "Creality K1 SE 0.6 nozzle", + "Creality K1 SE 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json index 0c80515aaa..edb0299bd1 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K1 SE_CFS-C-all.json @@ -1,138 +1,136 @@ { - "type": "filament", - "name": "Hyper PLA @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "qV4HvI6OV80255YA", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.038", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "qV4HvI6OV80255YA", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.038", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json index 4b3f6b5a60..1b5cb0960a 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K1C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "TnpXw6J6vdHtcI0m", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "35" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "35" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "TnpXw6J6vdHtcI0m", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "35" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "35" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json index f0513b112b..545ca6d21e 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K1C_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Hyper PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "NkW5cDCzmoseCFmO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "35" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "35" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "NkW5cDCzmoseCFmO", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "35" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "35" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json index c4175d3ead..363e4d1fff 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K1_CFS-C-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Hyper PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Q74GgG8YgUE29949", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Q74GgG8YgUE29949", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,190], [1.2,190], [1.3,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json index 193bf2dee6..a56f03f226 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Hyper PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "CCn1pBWY533DPO2I", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.2 nozzle", - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "CCn1pBWY533DPO2I", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json index 3d8a1cbdd6..8a7ba55748 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K2 Pro-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "1KX2t8HgeGnCF4Mt", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "30", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle", - "Creality K2 Pro 0.6 nozzle", - "Creality K2 Pro 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "1KX2t8HgeGnCF4Mt", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "30", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle", + "Creality K2 Pro 0.6 nozzle", + "Creality K2 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json index 34f98b70ae..ff07932212 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K2 SE-all.json @@ -1,140 +1,138 @@ { - "type": "filament", - "name": "Hyper PLA @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zTFbjztyji63caxW", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zTFbjztyji63caxW", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2-all.json index f47ea8a5d8..ff2f92dafc 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K2-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "Hyper PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "klq59FDTiu0dk3WO", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "30", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle", - "Creality K2 0.6 nozzle", - "Creality K2 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "klq59FDTiu0dk3WO", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "30", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle", + "Creality K2 0.6 nozzle", + "Creality K2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json index 00afa33b11..8487bf8565 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Hyper PLA @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "pvnoJu0FPBxRAX6w", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "0", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,205],[1.2,220]]", - "pressure_advance": "0.28", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.2 nozzle", - "Creality SPARKX i7 0.4 nozzle", - "Creality SPARKX i7 0.6 nozzle", - "Creality SPARKX i7 0.8 nozzle" - ], - "filament_id": "OFCZsqXg" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "pvnoJu0FPBxRAX6w", + "filament_id": "OFCZsqXg", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "0", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,205],[1.2,220]]", + "pressure_advance": "0.28", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.2 nozzle", + "Creality SPARKX i7 0.4 nozzle", + "Creality SPARKX i7 0.6 nozzle", + "Creality SPARKX i7 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json index fb92e57672..6aa016c0a5 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @Ender-3 V4-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Hyper PLA-CF @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "30n5mJl8L6az4Ugt", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,210],[1.2,220]]", - "pressure_advance": "0.028", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "30n5mJl8L6az4Ugt", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,210],[1.2,220]]", + "pressure_advance": "0.028", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json index e63ee3717d..87a03604c7 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @Hi-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Hyper PLA-CF @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "l4gTfu7FrFCXseZR", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "l4gTfu7FrFCXseZR", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json index d1a9cb3a38..eef42d1c01 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 Max_CFS-C-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "jNMBQgVxJOyIVLcq", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "jNMBQgVxJOyIVLcq", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json index 368b104901..b6fa3185df 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K1 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "qmyerfbWbH0wbbk7", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "60" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K1 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "qmyerfbWbH0wbbk7", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json index 215a01e8a7..b205835d92 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1 SE_CFS-C-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K1 SE_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "l8sx6lH2mvQLZObS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "60" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", - "pressure_advance": "0.036", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 SE_CFS-C 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K1 SE_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "l8sx6lH2mvQLZObS", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "60" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,190],[5.0,200],[14.0,210],[23.0,220]]", + "pressure_advance": "0.036", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 SE_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json index d6d269db66..89a64caad9 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "23SZfDiYXhm9hn5G", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "23SZfDiYXhm9hn5G", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json index 5ed8fbe15f..7c2ebcd7fa 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1C_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ITQgXSnjWFeY68wT", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ITQgXSnjWFeY68wT", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json index fe506e1147..5947f13e5c 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K1_CFS-C-all.json @@ -1,157 +1,155 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "9rf6iQ0xQuReogCt", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "0", - "filament_retract_lift_enforce": "All Surfaces", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", - "pressure_advance": "0.02", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "9rf6iQ0xQuReogCt", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "0", + "filament_retract_lift_enforce": "All Surfaces", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210], [10.0,220], [12.0,230]]", + "pressure_advance": "0.02", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json index f9267d07e8..078a075008 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Plus-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "GjpBicP4kPE8flGx", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "GjpBicP4kPE8flGx", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json index 9c465b0d30..2e1f5752d6 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 Pro-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Y4er7SRg27NLBiG1", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Y4er7SRg27NLBiG1", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json index 94ac06f8bb..a22777631f 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2 SE-all.json @@ -1,149 +1,147 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "NBqaRVKwrOk8znjG", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "NBqaRVKwrOk8znjG", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json index d0344132b6..ef5c46b673 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @K2-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Hyper PLA-CF @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "L7pciawKG1j3Q543", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "L7pciawKG1j3Q543", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json index 53b640d939..7427735721 100644 --- a/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA-CF @SPARKX i7-all.json @@ -1,176 +1,174 @@ { - "type": "filament", - "name": "Hyper PLA-CF @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "18bK3EZVaHGwGmsL", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "32" - ], - "filament_density": [ - "1.27" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFTnWzBs" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PLA-CF @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "18bK3EZVaHGwGmsL", + "filament_id": "OFTnWzBs", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "32" + ], + "filament_density": [ + "1.27" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json index c817224955..11b26eae81 100644 --- a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Plus-all.json @@ -1,185 +1,183 @@ { - "type": "filament", - "name": "Hyper PPA-CF @K2 Plus-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "ltnrZwbu4XXaDTkF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "89.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "70" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFNvBIL0" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PPA-CF @K2 Plus-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "ltnrZwbu4XXaDTkF", + "filament_id": "OFNvBIL0", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "89.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json index 4f7d4ddf2f..1c76caff66 100644 --- a/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper PPA-CF @K2 Pro-all.json @@ -1,181 +1,179 @@ { - "type": "filament", - "name": "Hyper PPA-CF @K2 Pro-all", - "inherits": "fdm_filament_pa", - "from": "system", - "setting_id": "wrCqzQPdSReyJSfo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "89.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "110" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "0", - "epoxy_resin_plate_temp_initial_layer": "0", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.044", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFNvBIL0" -} \ No newline at end of file + "type": "filament", + "name": "Hyper PPA-CF @K2 Pro-all", + "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "wrCqzQPdSReyJSfo", + "filament_id": "OFNvBIL0", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "89.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "110" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "0", + "epoxy_resin_plate_temp_initial_layer": "0", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.044", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json b/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json index 02756e4af3..05abf81f1d 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @Hi-all.json @@ -1,156 +1,154 @@ { - "type": "filament", - "name": "Hyper Stardust @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Jg5EAOLRZBLTvozN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Jg5EAOLRZBLTvozN", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200],[1.2,200],[1.5,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json index 0af9505f19..9a050ee4b8 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K1 Max_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "hwto2aYfebw6i6sm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "hwto2aYfebw6i6sm", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json index 7afa71cd4c..37d9c6b652 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K1C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "GC5jc2gUOL34TtA2", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "GC5jc2gUOL34TtA2", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json index 058d4439ea..6a55b510b4 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K1C_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zqZR6xEtm9Gokib0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "0" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "0", - "filament_retract_lift_below": "249", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zqZR6xEtm9Gokib0", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "0" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "0", + "filament_retract_lift_below": "249", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json index f90af90902..c61f91d90a 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K1_CFS-C-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "fWmKrIlCzeemGvXQ", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "fWmKrIlCzeemGvXQ", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.8,200], [1.2,200], [1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json index 7580e9f4e9..d33ce12919 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K2 Plus-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "Q0hz1XpiWQeZhcjF", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "35" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "35" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "3" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Q0hz1XpiWQeZhcjF", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "35" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "35" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "3" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.2,200],[1.1,200],[1.2,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json index 1e307464b1..b6fa563aa5 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K2 Pro-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "SjkfsdLhjA5CFsCl", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "SjkfsdLhjA5CFsCl", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json index 9134285053..5781afd1cd 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K2 SE-all.json @@ -1,143 +1,141 @@ { - "type": "filament", - "name": "Hyper Stardust @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "O2BLGgWwKLgovOmm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "3" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "O2BLGgWwKLgovOmm", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "3" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json b/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json index 154376069e..3ff2394a43 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @K2-all.json @@ -1,161 +1,159 @@ { - "type": "filament", - "name": "Hyper Stardust @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "4OC4zOZaAUUsyu27", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "4OC4zOZaAUUsyu27", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json b/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json index 43ccb7898c..8d0475a9e7 100644 --- a/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Hyper Stardust @SPARKX i7-all.json @@ -1,179 +1,177 @@ { - "type": "filament", - "name": "Hyper Stardust @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "flyQf6Emi8ND7BDe", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "26.9" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", - "pressure_advance": "0.028", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFXnToSX" -} \ No newline at end of file + "type": "filament", + "name": "Hyper Stardust @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "flyQf6Emi8ND7BDe", + "filament_id": "OFXnToSX", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "26.9" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.6,210],[1.2,220]]", + "pressure_advance": "0.028", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json index 62f308a71b..5eddb9e5dd 100644 --- a/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Panchroma PLA Matte @K2 Plus-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "Panchroma PLA Matte @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "ArTNQCA0xnqZKZk9", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "20.99" - ], - "filament_density": [ - "1.31" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Polymaker" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "7" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "55" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFrOh600" -} \ No newline at end of file + "type": "filament", + "name": "Panchroma PLA Matte @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "ArTNQCA0xnqZKZk9", + "filament_id": "OFrOh600", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.31" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json b/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json index 5d7f4818bd..8016cb164e 100644 --- a/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Panchroma PLA Satin @K2 Plus-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "Panchroma PLA Satin @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "dK0jvrB1WOFjPf7g", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19.99" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Polymaker" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "55" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFPkCJKE" -} \ No newline at end of file + "type": "filament", + "name": "Panchroma PLA Satin @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dK0jvrB1WOFjPf7g", + "filament_id": "OFPkCJKE", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19.99" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json index 20bd0700ab..f6ca211c24 100644 --- a/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/PolySonic PLA @K2 Plus-all.json @@ -1,172 +1,170 @@ { - "type": "filament", - "name": "PolySonic PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "K3kUZYddQO8SUKKa", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Polymaker" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "55" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF66KUAN" -} \ No newline at end of file + "type": "filament", + "name": "PolySonic PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "K3kUZYddQO8SUKKa", + "filament_id": "OF66KUAN", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json b/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json index acd8558abe..384df90aea 100644 --- a/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/PolySonic PLA Pro @K2 Plus-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "PolySonic PLA Pro @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "DEU6e8l8Gbz616Fi", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Polymaker" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "55" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFKbdiiJ" -} \ No newline at end of file + "type": "filament", + "name": "PolySonic PLA Pro @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "DEU6e8l8Gbz616Fi", + "filament_id": "OFKbdiiJ", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Polymaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json index b159f9141b..d8da599f2e 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Ender-3 V4-all.json @@ -1,153 +1,151 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @Ender-3 V4-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "lMmOE3j5nMNIukQN", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "60", - "customized_plate_temp_initial_layer": "60", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,220]]", - "pressure_advance": "0.024", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Ender-3 V4 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @Ender-3 V4-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "lMmOE3j5nMNIukQN", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "60", + "customized_plate_temp_initial_layer": "60", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,220]]", + "pressure_advance": "0.024", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Ender-3 V4 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json index 163ed96d8a..3e8218631a 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @Hi-all.json @@ -1,146 +1,144 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @Hi-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "DzjjhzaPhKF7olJU", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - " ; filament end gcode" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "dont_slow_down_outer_wall": "1", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", - "pressure_advance": "0.068", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality Hi 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @Hi-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "DzjjhzaPhKF7olJU", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + " ; filament end gcode" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "dont_slow_down_outer_wall": "1", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", + "pressure_advance": "0.068", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality Hi 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json index 5612fad4d2..02f2e4e522 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1 Max_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K1 Max_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "9dhggId2Cg5oR8Qo", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.066", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1 Max_CFS-C 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K1 Max_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "9dhggId2Cg5oR8Qo", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > initial_layer_print_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.066", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1 Max_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json index f975e2b6c4..9bf300cddd 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K1C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "XP2BDRK5jZOC4TYv", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.066", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K1C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "XP2BDRK5jZOC4TYv", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.066", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json index 9f4c2d9029..f679fcd5cf 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1C_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K1C_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "98NLzuVoD8d35zrm", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.066", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1C_CFS-C 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K1C_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "98NLzuVoD8d35zrm", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.066", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1C_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json index 0c7bd485be..511b5d54c5 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K1_CFS-C-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K1_CFS-C-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "zovui7ZsQ26KEgYY", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "50", - "epoxy_resin_plate_temp_initial_layer": "50", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.074", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K1_CFS-C 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K1_CFS-C-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "zovui7ZsQ26KEgYY", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + ";filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "50", + "epoxy_resin_plate_temp_initial_layer": "50", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.074", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K1_CFS-C 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json index 06b1fc8729..95cf3dce88 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Plus-all.json @@ -1,165 +1,163 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "QJjtgwE6G4TS3V6y", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "80" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "QJjtgwE6G4TS3V6y", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json index 37702f76c0..bae012fbbf 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 Pro-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K2 Pro-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "cprQoD8o6UmetOxS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "95" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K2 Pro-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "cprQoD8o6UmetOxS", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "95" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json index 7ff723f655..8c52ebabe2 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2 SE-all.json @@ -1,150 +1,148 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K2 SE-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "vAzjJYRL4Swmyq0z", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "customized_plate_temp": "0", - "customized_plate_temp_initial_layer": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 SE 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K2 SE-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "vAzjJYRL4Swmyq0z", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "customized_plate_temp": "0", + "customized_plate_temp_initial_layer": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,200],[1.2,200],[1.3,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json index 2d68106751..b8eb3d503b 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @K2-all.json @@ -1,168 +1,166 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @K2-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "UhE9df2kH6LealCb", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "95" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", - "pressure_advance": "0.06", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @K2-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "UhE9df2kH6LealCb", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "95" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[0.5,190],[1.0,190],[1.2,220]]", + "pressure_advance": "0.06", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json b/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json index 9bad5351c2..c7f54e1c4b 100644 --- a/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Soleyin Ultra PLA @SPARKX i7-all.json @@ -1,174 +1,172 @@ { - "type": "filament", - "name": "Soleyin Ultra PLA @SPARKX i7-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "SlwK2b9m8ZQJY4nH", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "55" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "6" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - ";filament start gcode" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "1", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[1.0,210],[1.2,220]]", - "pressure_advance": "0.05", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OF02UAVh" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Ultra PLA @SPARKX i7-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "SlwK2b9m8ZQJY4nH", + "filament_id": "OF02UAVh", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "6" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + ";filament start gcode" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "1", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[1.0,210],[1.2,220]]", + "pressure_advance": "0.05", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json index 77f2c6a6bf..7e5976dfdf 100644 --- a/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN ABS+ @K2 Plus-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "eSUN ABS+ @K2 Plus-all", - "inherits": "fdm_filament_abs", - "from": "system", - "setting_id": "7plEfQUFL6qclQ8B", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_cost": [ - "15" - ], - "filament_density": [ - "1.08" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "60", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFTXduCM" -} \ No newline at end of file + "type": "filament", + "name": "eSUN ABS+ @K2 Plus-all", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "7plEfQUFL6qclQ8B", + "filament_id": "OFTXduCM", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "filament_cost": [ + "15" + ], + "filament_density": [ + "1.08" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "60", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json index 1afd5f1511..01e9994985 100644 --- a/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN ASA+ @K2 Plus-all.json @@ -1,159 +1,157 @@ { - "type": "filament", - "name": "eSUN ASA+ @K2 Plus-all", - "inherits": "fdm_filament_asa", - "from": "system", - "setting_id": "WjM4WIPAamvbee7G", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "100" - ], - "cool_plate_temp_initial_layer": [ - "100" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "fan_cooling_layer_time": [ - "40" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.1" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "20" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_layer": "2", - "activate_chamber_temp_control": "1", - "chamber_temperature": "50", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "90", - "epoxy_resin_plate_temp_initial_layer": "90", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFUmS5z5" -} \ No newline at end of file + "type": "filament", + "name": "eSUN ASA+ @K2 Plus-all", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "WjM4WIPAamvbee7G", + "filament_id": "OFUmS5z5", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "100" + ], + "cool_plate_temp_initial_layer": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "40" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.1" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_layer": "2", + "activate_chamber_temp_control": "1", + "chamber_temperature": "50", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "90", + "epoxy_resin_plate_temp_initial_layer": "90", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json index 08ab12e2c9..f7822a2487 100644 --- a/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PET-Basic @K2 Plus-all.json @@ -1,189 +1,187 @@ { - "type": "filament", - "name": "eSUN PET-Basic @K2 Plus-all", - "inherits": "fdm_filament_pet", - "from": "system", - "setting_id": "fJJfZCZc5MrXX1Lg", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "105" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.28" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PET" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFHaYaB1" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PET-Basic @K2 Plus-all", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "fJJfZCZc5MrXX1Lg", + "filament_id": "OFHaYaB1", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "105" + ], + "eng_plate_temp_initial_layer": [ + "105" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.28" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PET" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json index d4f35de9be..83240e0283 100644 --- a/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA+ @K2 Plus-all.json @@ -1,163 +1,161 @@ { - "type": "filament", - "name": "eSUN PLA+ @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "AW7HLQJ78DAEUjge", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "80%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "53" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "55", - "customized_plate_temp_initial_layer": "55", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "45", - "epoxy_resin_plate_temp_initial_layer": "45", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFqINlYj" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA+ @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "AW7HLQJ78DAEUjge", + "filament_id": "OFqINlYj", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "53" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "55", + "customized_plate_temp_initial_layer": "55", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "45", + "epoxy_resin_plate_temp_initial_layer": "45", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json index 2e4b7703a0..6db1c4631d 100644 --- a/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA-LW @K2 Plus-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "eSUN PLA-LW @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "9lAD1qJIwwtcSvk0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "45" - ], - "eng_plate_temp_initial_layer": [ - "45" - ], - "fan_min_speed": [ - "50" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.86" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "0", - "chamber_temperature": "0", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "0", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_shrinkage_compensation_z": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.1", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFi5RSve" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA-LW @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "9lAD1qJIwwtcSvk0", + "filament_id": "OFi5RSve", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_min_speed": [ + "50" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.86" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "0", + "chamber_temperature": "0", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "0", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_shrinkage_compensation_z": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", + "pressure_advance": "0.1", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json index d5f4324da1..b9be49bb1c 100644 --- a/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA-Lite @K2 Plus-all.json @@ -1,169 +1,167 @@ { - "type": "filament", - "name": "eSUN PLA-Lite @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "om2444MoWYK7ZCqS", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.23" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "53" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFhbolij" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA-Lite @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "om2444MoWYK7ZCqS", + "filament_id": "OFhbolij", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "53" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json index bca728ae00..3bdb36e816 100644 --- a/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA-Matte @K2 Plus-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "eSUN PLA-Matte @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "BYYGdJpoZG5BXr1r", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_density": [ - "1.33" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "51" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode \n" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFDETOM6" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA-Matte @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "BYYGdJpoZG5BXr1r", + "filament_id": "OFDETOM6", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_density": [ + "1.33" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "51" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode \n" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json index fa57453069..2d41fc01a8 100644 --- a/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA-Silk @K2 Plus-all.json @@ -1,166 +1,164 @@ { - "type": "filament", - "name": "eSUN PLA-Silk @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "IfZwVzcyYM0D5XR0", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "19" - ], - "filament_density": [ - "1.21" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_vendor": [ - "eSUN" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "required_nozzle_HRC": [ - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "filament_end_gcode": [ - ";filament end gcode " - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "cool_cds_fan_start_at_height": "0.5", - "cool_special_cds_fan_speed": "100", - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "default_filament_colour": "\"\"", - "enable_overhang_bridge_fan": "1", - "enable_pressure_advance": "0", - "enable_special_area_additional_cooling_fan": "0", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "filament_cooling_final_speed": "3.4", - "filament_cooling_initial_speed": "2.2", - "filament_cooling_moves": "4", - "filament_load_time": "0", - "filament_loading_speed": "28", - "filament_loading_speed_start": "3", - "filament_multitool_ramming": "0", - "filament_multitool_ramming_flow": "10", - "filament_multitool_ramming_volume": "10", - "filament_notes": "\"\"", - "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "filament_shrink": "100%", - "filament_toolchange_delay": "0", - "filament_unload_time": "0", - "filament_unloading_speed": "90", - "filament_unloading_speed_start": "100", - "material_flow_dependent_temperature": "0", - "pressure_advance": "0.04", - "support_material_interface_fan_speed": "-1", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFIRUqWi" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA-Silk @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "IfZwVzcyYM0D5XR0", + "filament_id": "OFIRUqWi", + "instantiation": "true", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "19" + ], + "filament_density": [ + "1.21" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_vendor": [ + "eSUN" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "filament_end_gcode": [ + ";filament end gcode " + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "cool_cds_fan_start_at_height": "0.5", + "cool_special_cds_fan_speed": "100", + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "default_filament_colour": "\"\"", + "enable_overhang_bridge_fan": "1", + "enable_pressure_advance": "0", + "enable_special_area_additional_cooling_fan": "0", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "filament_cooling_final_speed": "3.4", + "filament_cooling_initial_speed": "2.2", + "filament_cooling_moves": "4", + "filament_loading_speed": "28", + "filament_loading_speed_start": "3", + "filament_multitool_ramming": "0", + "filament_multitool_ramming_flow": "10", + "filament_multitool_ramming_volume": "10", + "filament_notes": "\"\"", + "filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "filament_shrink": "100%", + "filament_toolchange_delay": "0", + "filament_unloading_speed": "90", + "filament_unloading_speed_start": "100", + "material_flow_dependent_temperature": "0", + "pressure_advance": "0.04", + "support_material_interface_fan_speed": "-1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json index 1911d1f0d0..f28e3fc7a6 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE.json @@ -8,5 +8,5 @@ "bed_model": "creality_ender3v3ke_buildplate_model.stl", "bed_texture": "creality_ender3v3ke_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all" + "default_materials": "Generic ABS @Creality Ender-3V3-all;Generic ASA @Creality Ender-3V3-all;Generic PETG @Creality Ender-3V3-all;Generic PLA @Creality Ender-3V3-all;Generic PLA High Speed @Creality Ender-3V3-all;Generic PLA Matte @Creality Ender-3V3-all;Generic PLA Silk @Creality Ender-3V3-all;Generic TPU @Creality Ender-3V3-all;Generic PLA @System" } diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json index 3c1fcae969..5829268d2e 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality Ender-3 V4 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "R96v98fNsXyf9HXq", + "instantiation": "true", "printer_model": "Creality Ender-3 V4", "auxiliary_fan": "0", "bbl_use_printhost": "0", @@ -69,7 +71,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -105,7 +106,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality Ender-3 V4 0.4 nozzle", - "setting_id": "R96v98fNsXyf9HXq" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V4.json b/resources/profiles/Creality/machine/Creality Ender-3 V4.json index 22fc2a9c6a..3229f33792 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V4.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V4.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_Ender_3_V4", - "default_materials": "Creality Generic ABS @Ender-3 V4-all;Creality Generic ASA @Ender-3 V4-all;Creality Generic PETG @Ender-3 V4-all;Creality Generic PLA @Ender-3 V4-all;Creality Generic PLA Matte @Ender-3 V4-all;Creality Generic PLA Silk @Ender-3 V4-all;Creality Generic TPU @Ender-3 V4-all" + "default_materials": "Generic ABS @Ender-3 V4-all;Generic ASA @System;Generic PETG @Ender-3 V4-all;Generic PLA @Ender-3 V4-all;Generic PLA Matte @System;Generic PLA-Silk @Ender-3 V4-all;Generic TPU @Ender-3 V4-all" } diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json index fb15db7ab3..496a977127 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json @@ -72,7 +72,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json index f895c93b42..59d08460d5 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality Ender-5 Max 0.6 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "1idSrUiK9hZwCJNy", + "instantiation": "true", "printer_model": "Creality Ender-5 Max", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", @@ -74,7 +76,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -113,7 +114,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality Ender-5 Max 0.6 nozzle", - "setting_id": "1idSrUiK9hZwCJNy" -} \ No newline at end of file + "z_hop_types": "Slope Lift" +} diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json index 2fad99bcea..fcfa26e790 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality Ender-5 Max 0.8 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "mPvxCeNkSTMYta2L", + "instantiation": "true", "printer_model": "Creality Ender-5 Max", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", @@ -74,7 +76,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -113,7 +114,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality Ender-5 Max 0.8 nozzle", - "setting_id": "mPvxCeNkSTMYta2L" -} \ No newline at end of file + "z_hop_types": "Slope Lift" +} diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max.json b/resources/profiles/Creality/machine/Creality Ender-5 Max.json index 9c10f97f05..08079fdfca 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max.json @@ -9,5 +9,5 @@ "bed_texture": "creality_ender5max_buildplate_texture.svg", "hotend_model": "", "default_bed_type": "Textured PEI Plate", - "default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Generic TPU @Creality Ender-5Max-all;Generic ASA @Creality Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Generic PLA @Creality Ender-5Max-all;Generic PETG @Creality Ender-5Max-all;Generic ABS @Creality Ender-5Max-all;Generic PA @Creality Ender-5Max-all" + "default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Generic TPU @Creality Ender-5Max-all;Generic ASA @Creality Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Generic PLA @Creality Ender-5Max-all;Generic PETG @Creality Ender-5Max-all;Generic ABS @Creality Ender-5Max-all;Generic PA @Creality Ender-5Max-all;Generic PLA @System" } diff --git a/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json index 57dcd7e949..2acc80fe3d 100644 --- a/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality Hi 0.2 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "Qr6oR8AJNy1QmytY", + "instantiation": "true", "printer_model": "Creality Hi", "printer_structure": "i3", "default_print_profile": "0.1mm Standard @Creality Hi 0.2 nozzle", @@ -78,7 +80,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "1", @@ -118,7 +119,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Auto Lift", - "name": "Creality Hi 0.2 nozzle", - "setting_id": "Qr6oR8AJNy1QmytY" -} \ No newline at end of file + "z_hop_types": "Auto Lift" +} diff --git a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json index 0372431a1e..613089a72c 100644 --- a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json @@ -178,7 +178,6 @@ "printer_technology": "FFF", "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", - "silent_mode": "0", "support_chamber_temp_control": "1", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json index f7bcd5884d..95d55f0a56 100644 --- a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json @@ -178,7 +178,6 @@ "printer_technology": "FFF", "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", - "silent_mode": "0", "support_chamber_temp_control": "1", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json index 23e19a2a66..dcf32371d4 100644 --- a/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality Hi 0.8 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "Q7M2ihdHisSVLDGF", + "instantiation": "true", "printer_model": "Creality Hi", "printer_structure": "i3", "default_print_profile": "0.40mm Standard @Creality Hi 0.8 nozzle", @@ -73,7 +75,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "1", @@ -110,7 +111,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Auto Lift", - "name": "Creality Hi 0.8 nozzle", - "setting_id": "Q7M2ihdHisSVLDGF" -} \ No newline at end of file + "z_hop_types": "Auto Lift" +} diff --git a/resources/profiles/Creality/machine/Creality Hi.json b/resources/profiles/Creality/machine/Creality Hi.json index 279daf531c..8bb1244b8d 100644 --- a/resources/profiles/Creality/machine/Creality Hi.json +++ b/resources/profiles/Creality/machine/Creality Hi.json @@ -9,5 +9,5 @@ "bed_texture": "creality_hi_buildplate_texture.svg", "default_bed_type": "Textured PEI Plate", "hotend_model": "", - "default_materials": "Generic ABS @Creality Hi-all;Generic ABS @Hi-all;Generic ASA @Creality Hi-all;Generic ASA-CF @Creality Hi-all;Generic PETG @Creality Hi-all;Generic PETG @Hi-all;Generic PETG-CF @Creality Hi-all;Generic PLA @Creality Hi-all;Generic PLA @Hi-all;Generic PLA High Speed @Creality Hi-all;Generic PLA Matte @Creality Hi-all;Generic PLA Silk @Creality Hi-all;Generic PLA-CF @Creality Hi-all;Generic PLA Wood @Creality Hi-all;Generic TPU @Creality Hi-all" + "default_materials": "Generic ABS @Creality Hi-all;Generic ABS @Hi-all;Generic ASA @Creality Hi-all;Generic ASA-CF @Creality Hi-all;Generic PETG @Creality Hi-all;Generic PETG @Hi-all;Generic PETG-CF @Creality Hi-all;Generic PLA @Creality Hi-all;Generic PLA @Hi-all;Generic PLA High Speed @Creality Hi-all;Generic PLA Matte @Creality Hi-all;Generic PLA Silk @Creality Hi-all;Generic PLA-CF @Creality Hi-all;Generic PLA Wood @Creality Hi-all;Generic TPU @Creality Hi-all;Hyper PLA @Hi-all" } diff --git a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json index 4cde2d1f5e..01a3bc7d5d 100644 --- a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json +++ b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json @@ -121,7 +121,7 @@ "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600", "machine_pause_gcode": "PAUSE", "default_filament_profile": [ - "Generic PLA HF @Creality" + "Generic PLA HF @Creality" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600", "machine_end_gcode": "END_PRINT", @@ -167,7 +167,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_air_filtration": "1", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", diff --git a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json index afaa516e7e..fdb83b032e 100644 --- a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json +++ b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json @@ -172,7 +172,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_air_filtration": "1", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", diff --git a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json index 417c088cb7..8cb8e6f169 100644 --- a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json +++ b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json @@ -172,7 +172,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_air_filtration": "1", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json index c3978a05eb..291affba77 100644 --- a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json +++ b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json @@ -168,7 +168,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json index 2ebe0a97c2..523abd4de4 100644 --- a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json +++ b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json @@ -173,7 +173,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json index b59c1f54a4..c67622c90b 100644 --- a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json +++ b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json @@ -173,7 +173,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json index 992ae60a0f..6d382f4c09 100644 --- a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K1 Max_CFS-C 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "zx1WGvi1Ff3X3RpP", + "instantiation": "true", "printer_model": "Creality K1 Max_CFS-C", "auxiliary_fan": "1", "bbl_use_printhost": "0", @@ -71,7 +73,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", @@ -107,7 +108,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Auto Lift", - "name": "Creality K1 Max_CFS-C 0.4 nozzle", - "setting_id": "zx1WGvi1Ff3X3RpP" + "z_hop_types": "Auto Lift" } diff --git a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json index 012ad881ea..7170d6b6fb 100644 --- a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json +++ b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_K1_Max_CFS_C", - "default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality" + "default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality;Generic PLA @K1 Max_CFS-C-all" } diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json index 95db217016..f8aa68f3c0 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json @@ -168,7 +168,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "time_cost": "0", "use_firmware_retraction": "0", diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json index b78cf80658..bbc97a8f5a 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K1 SE 0.6 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "x2DzbcUOES62gJTj", + "instantiation": "true", "printer_model": "Creality K1 SE", "auxiliary_fan": "0", "bbl_use_printhost": "0", @@ -71,7 +73,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -107,7 +108,5 @@ "wipe": "1", "wipe_distance": "1", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality K1 SE 0.6 nozzle", - "setting_id": "x2DzbcUOES62gJTj" -} \ No newline at end of file + "z_hop_types": "Slope Lift" +} diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json index 175ff1da66..00282be149 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K1 SE 0.8 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "sJR1oCXnOEQ2HZ5O", + "instantiation": "true", "printer_model": "Creality K1 SE", "auxiliary_fan": "0", "bbl_use_printhost": "0", @@ -71,7 +73,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -107,7 +108,5 @@ "wipe": "1", "wipe_distance": "1", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality K1 SE 0.8 nozzle", - "setting_id": "sJR1oCXnOEQ2HZ5O" -} \ No newline at end of file + "z_hop_types": "Slope Lift" +} diff --git a/resources/profiles/Creality/machine/Creality K1 SE.json b/resources/profiles/Creality/machine/Creality K1 SE.json index 1cb9769e0e..5d6d0dd51d 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE.json +++ b/resources/profiles/Creality/machine/Creality K1 SE.json @@ -9,5 +9,5 @@ "bed_texture": "creality_k1se_buildplate_texture.svg", "hotend_model": "", "default_bed_type": "Textured PEI Plate", - "default_materials": "Generic ABS @Creality K1-all;Generic ABS @K1 SE-all;Generic ASA @Creality K1-all;Generic ASA @K1 SE-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PETG @K1 SE-all;Generic PLA @Creality K1-all;Generic PLA @K1 SE-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic PLA-CF @K1 SE-all;Generic TPU @Creality K1-all;Generic TPU @K1 SE-all" + "default_materials": "Generic ABS @Creality K1-all;Generic ABS @K1 SE-all;Generic ASA @Creality K1-all;Generic ASA @K1 SE-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PETG @K1 SE-all;Generic PLA @Creality K1-all;Generic PLA @K1 SE-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic PLA-CF @K1 SE-all;Generic TPU @Creality K1-all;Generic TPU @K1 SE-all;Hyper PLA @K1 SE-all" } diff --git a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json index 510e17ecf5..8fda2c9f43 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K1 SE_CFS-C 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "jAWMfHFcVBnqEqb1", + "instantiation": "true", "printer_model": "Creality K1 SE_CFS-C", "auxiliary_fan": "0", "bbl_use_printhost": "0", @@ -70,7 +72,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -106,7 +107,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality K1 SE_CFS-C 0.4 nozzle", - "setting_id": "jAWMfHFcVBnqEqb1" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json index 835c133338..4c9ed70211 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json +++ b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_K1_SE_CFS_C", - "default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all" + "default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all;Generic PLA @K1 SE_CFS-C-all" } diff --git a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json index 5d8154c1f1..ac6fd03393 100644 --- a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json @@ -168,7 +168,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json index 73328c69f4..58e7fa841f 100644 --- a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json @@ -173,7 +173,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json index 2c59727abf..82edb57d82 100644 --- a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json @@ -173,7 +173,6 @@ "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", - "silent_mode": "0", "support_chamber_temp_control": "0", "thumbnails_format": "PNG", "time_cost": "0", diff --git a/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json index b3221b0dd5..a49967f597 100644 --- a/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K1C_CFS-C 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "ZhdzT48wvUDLGpPp", + "instantiation": "true", "printer_model": "Creality K1C_CFS-C", "auxiliary_fan": "1", "bbl_use_printhost": "0", @@ -71,7 +73,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", @@ -107,7 +108,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Auto Lift", - "name": "Creality K1C_CFS-C 0.4 nozzle", - "setting_id": "ZhdzT48wvUDLGpPp" + "z_hop_types": "Auto Lift" } diff --git a/resources/profiles/Creality/machine/Creality K1C_CFS-C.json b/resources/profiles/Creality/machine/Creality K1C_CFS-C.json index 6e80f1fbd4..d68987dd16 100644 --- a/resources/profiles/Creality/machine/Creality K1C_CFS-C.json +++ b/resources/profiles/Creality/machine/Creality K1C_CFS-C.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_K1C_CFS_C", - "default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all" + "default_materials": "Generic ABS @Creality K1-all;Generic ASA @Creality K1-all;Generic PA-CF @Creality K1-all;Generic PC @Creality K1-all;Generic PETG @Creality K1-all;Generic PLA @Creality K1-all;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PLA-CF @Creality K1-all;Generic TPU @Creality K1-all;Generic PLA @K1C_CFS-C-all" } diff --git a/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json index 04cb946b94..4da0be155c 100644 --- a/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K1_CFS-C 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "AnvSIapWvZ2Jpc3T", + "instantiation": "true", "printer_model": "Creality K1_CFS-C", "auxiliary_fan": "1", "bbl_use_printhost": "0", @@ -71,7 +73,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", @@ -107,7 +108,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Auto Lift", - "name": "Creality K1_CFS-C 0.4 nozzle", - "setting_id": "AnvSIapWvZ2Jpc3T" + "z_hop_types": "Auto Lift" } diff --git a/resources/profiles/Creality/machine/Creality K1_CFS-C.json b/resources/profiles/Creality/machine/Creality K1_CFS-C.json index c5986ae635..70ea42818a 100644 --- a/resources/profiles/Creality/machine/Creality K1_CFS-C.json +++ b/resources/profiles/Creality/machine/Creality K1_CFS-C.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_K1_CFS_C", - "default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PC @Creality K1-all;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PETG @Creality;Generic TPU @Creality" + "default_materials": "Generic ABS @Creality;Generic ASA @Creality;Generic PC @Creality K1-all;Generic PLA @Creality;Generic PLA HF @Creality;Generic Speed PLA @Creality HF;Generic PLA High Speed @Creality K1-all;Generic PLA Matte @Creality K1-all;Generic PLA Silk @Creality K1-all;Generic PETG @Creality;Generic TPU @Creality;Generic PLA @K1_CFS-C-all" } diff --git a/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json index c75b9d04f1..7c12aeadf0 100644 --- a/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json @@ -1,9 +1,10 @@ { "type": "machine", + "name": "Creality K2 0.2 nozzle", + "inherits": "fdm_creality_common", "from": "system", "setting_id": "8aX66GbijkwrT7DY", "instantiation": "true", - "inherits": "fdm_creality_common", "printer_model": "Creality K2", "printer_settings_id": "Creality", "auxiliary_fan": "1", @@ -108,7 +109,6 @@ "printhost_authorization_type": "key", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -181,6 +181,5 @@ "z_hop": [ "0.4" ], - "name": "Creality K2 0.2 nozzle", "nozzle_height": "4" } diff --git a/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json index 1c28315013..867cc80255 100644 --- a/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K2 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "XiWyoJJ90uesQMGs", + "instantiation": "true", "printer_model": "Creality K2", "printer_settings_id": "Creality", "auxiliary_fan": "1", @@ -104,7 +106,6 @@ "printhost_authorization_type": "key", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", @@ -177,7 +178,6 @@ "z_hop": [ "0.4" ], - "name": "Creality K2 0.4 nozzle", "bbl_use_printhost": "0", "bed_exclude_area": "0x0", "bed_mesh_max": "99999,99999", @@ -201,6 +201,5 @@ "long_retractions_when_cut": "1", "retract_lift_enforce": "All Surfaces", "retraction_distances_when_cut": "30", - "z_hop_types": "Auto Lift", - "setting_id": "XiWyoJJ90uesQMGs" + "z_hop_types": "Auto Lift" } diff --git a/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json index 8eb0c83877..65b7831c56 100644 --- a/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json @@ -1,9 +1,10 @@ { "type": "machine", + "name": "Creality K2 0.6 nozzle", + "inherits": "fdm_creality_common", "from": "system", "setting_id": "xjllrWDeH0ABMI8K", "instantiation": "true", - "inherits": "fdm_creality_common", "printer_model": "Creality K2", "printer_settings_id": "Creality", "auxiliary_fan": "1", @@ -106,7 +107,6 @@ "printhost_authorization_type": "key", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", @@ -179,7 +179,6 @@ "z_hop": [ "0.4" ], - "name": "Creality K2 0.6 nozzle", "adaptive_bed_mesh_margin": "0", "bbl_use_printhost": "0", "bed_exclude_area": "0x0", diff --git a/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json index 1281d5934d..cfebdec178 100644 --- a/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json @@ -1,9 +1,10 @@ { "type": "machine", + "name": "Creality K2 0.8 nozzle", + "inherits": "fdm_creality_common", "from": "system", "setting_id": "O1ardlnBQ2nqCs07", "instantiation": "true", - "inherits": "fdm_creality_common", "printer_model": "Creality K2", "printer_settings_id": "Creality", "auxiliary_fan": "1", @@ -106,7 +107,6 @@ "printhost_authorization_type": "key", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", @@ -179,7 +179,6 @@ "z_hop": [ "0.4" ], - "name": "Creality K2 0.8 nozzle", "adaptive_bed_mesh_margin": "0", "bbl_use_printhost": "0", "bed_exclude_area": "0x0", diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json index e55e947fac..9f7b11b43f 100644 --- a/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json @@ -181,7 +181,6 @@ "printer_technology": "FFF", "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", - "silent_mode": "0", "time_cost": "0", "use_firmware_retraction": "0", "use_relative_e_distances": "1", diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json index 9ca340c779..e43f1ab2b5 100644 --- a/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json @@ -181,7 +181,6 @@ "printer_technology": "FFF", "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", - "silent_mode": "0", "time_cost": "0", "use_firmware_retraction": "0", "use_relative_e_distances": "1", diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json index 4cadba6946..423aaf9373 100644 --- a/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json @@ -181,7 +181,6 @@ "printer_technology": "FFF", "printhost_authorization_type": "key", "printhost_ssl_ignore_revoke": "0", - "silent_mode": "0", "time_cost": "0", "use_firmware_retraction": "0", "use_relative_e_distances": "1", diff --git a/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json index 4b0e4754fc..a1c33a0026 100644 --- a/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality K2 SE 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "Blm3dYf9xWwUoaYJ", + "instantiation": "true", "printer_model": "Creality K2 SE", "auxiliary_fan": "0", "bbl_use_printhost": "0", @@ -71,7 +73,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "1", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -107,7 +108,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality K2 SE 0.4 nozzle", - "setting_id": "Blm3dYf9xWwUoaYJ" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality K2 SE.json b/resources/profiles/Creality/machine/Creality K2 SE.json index 5b7ec27ea0..1a0c0901b1 100644 --- a/resources/profiles/Creality/machine/Creality K2 SE.json +++ b/resources/profiles/Creality/machine/Creality K2 SE.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_K2_SE", - "default_materials": "Generic ABS @Creality K2-all;Generic ASA @Creality K2-all;Generic PETG @Creality K2-all;Generic PLA @Creality K2-all;Generic PLA High Speed @Creality K2-all;Generic PLA Matte @Creality K2-all;Generic PLA Silk @Creality K2-all" + "default_materials": "Generic ABS @Creality K2-all;Generic ASA @Creality K2-all;Generic PETG @Creality K2-all;Generic PLA @Creality K2-all;Generic PLA High Speed @Creality K2-all;Generic PLA Matte @Creality K2-all;Generic PLA Silk @Creality K2-all;Generic PLA @K2 SE-all" } diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json index c2ea633914..6a499942bf 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality SPARKX i7 0.2 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "I4qasXKWnIbPgYbu", + "instantiation": "true", "printer_model": "Creality SPARKX i7", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", @@ -78,7 +80,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -118,7 +119,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality SPARKX i7 0.2 nozzle", - "setting_id": "I4qasXKWnIbPgYbu" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json index 8ee1efeebd..68dedf568b 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality SPARKX i7 0.4 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "4usBaKppjmBSZy8N", + "instantiation": "true", "printer_model": "Creality SPARKX i7", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", @@ -78,7 +80,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -118,7 +119,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality SPARKX i7 0.4 nozzle", - "setting_id": "4usBaKppjmBSZy8N" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json index 70c72ec78f..f13761fa81 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality SPARKX i7 0.6 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "6R7l1V4liyafB0lf", + "instantiation": "true", "printer_model": "Creality SPARKX i7", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", @@ -78,7 +80,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -118,7 +119,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality SPARKX i7 0.6 nozzle", - "setting_id": "6R7l1V4liyafB0lf" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json index d8358eb9dc..053f23fd77 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json @@ -1,8 +1,10 @@ { "type": "machine", - "from": "system", - "instantiation": "true", + "name": "Creality SPARKX i7 0.8 nozzle", "inherits": "fdm_creality_common", + "from": "system", + "setting_id": "kwyQHmNESgzBBCr0", + "instantiation": "true", "printer_model": "Creality SPARKX i7", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", @@ -78,7 +80,6 @@ "printhost_ssl_ignore_revoke": "0", "purge_in_prime_tower": "0", "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -118,7 +119,5 @@ "wipe": "1", "wipe_distance": "2", "z_hop": "0.4", - "z_hop_types": "Slope Lift", - "name": "Creality SPARKX i7 0.8 nozzle", - "setting_id": "kwyQHmNESgzBBCr0" + "z_hop_types": "Slope Lift" } diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7.json b/resources/profiles/Creality/machine/Creality SPARKX i7.json index 73a5e85ead..4ec6a2a935 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7.json @@ -9,5 +9,5 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Creality_SPARKX_i7", - "default_materials": "Generic PETG @SPARKX i7-all;Generic PLA @SPARKX i7-all;CR-PLA Matte @SPARKX i7-all;Generic PLA Silk @SPARKX i7-all" + "default_materials": "Generic PETG @SPARKX i7-all;Generic PLA @SPARKX i7-all;CR-PLA Matte @SPARKX i7-all;Generic PLA-Silk @SPARKX i7-all" } diff --git a/resources/profiles/Creality/machine/fdm_creality_common.json b/resources/profiles/Creality/machine/fdm_creality_common.json index 1818e8b54b..1defbe311e 100644 --- a/resources/profiles/Creality/machine/fdm_creality_common.json +++ b/resources/profiles/Creality/machine/fdm_creality_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Creality/machine/fdm_machine_common.json b/resources/profiles/Creality/machine/fdm_machine_common.json index 26e3032451..88b73d03e3 100644 --- a/resources/profiles/Creality/machine/fdm_machine_common.json +++ b/resources/profiles/Creality/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "support_chamber_temp_control": "0", "support_air_filtration": "0", "machine_max_acceleration_e": [ diff --git a/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json index 0ff5143efe..fa3f86d8c1 100644 --- a/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "5FeO8mZypv8CHDpj", "name": "0.06mm SuperDetail @Creality K2 Plus 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "5FeO8mZypv8CHDpj", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,100,6000], [1.0,1.5,80,5500], [1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json index e993c77b6c..1ee91f8cad 100644 --- a/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality Hi 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "peqHRWTyVxZ2w5WU", "name": "0.08mm HueForge @Creality Hi 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "peqHRWTyVxZ2w5WU", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,100,6000,210],[1.0,1.5,80,5500,200],[1.5,2.0,60,5000,190]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "15", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json index 3f0ff3b207..d5f49f7674 100644 --- a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "rWpJRnZscjXyKngw", "name": "0.08mm HueForge @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "rWpJRnZscjXyKngw", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json index 6ddf78e2d2..1570aed7cc 100644 --- a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "nOd96z5QquzKG3iu", "name": "0.08mm HueForge @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "nOd96z5QquzKG3iu", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json index ab5c252c2b..cfbba070ec 100644 --- a/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality K2 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "uUPLPuPdvODZdBSU", "name": "0.08mm HueForge @Creality K2 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "uUPLPuPdvODZdBSU", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json index f584a86449..95593ff7f2 100644 --- a/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm HueForge @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "KQXt6EPU3DFJ4xLr", "name": "0.08mm HueForge @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "KQXt6EPU3DFJ4xLr", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "20", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -176,7 +174,6 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "1", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "80%", diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json index 05da7204cf..121b745758 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality Hi 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "Gzis5yvHXQD9PnSf", "name": "0.08mm SuperDetail @Creality Hi", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "Gzis5yvHXQD9PnSf", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,100,6000,210],[1.0,1.5,80,5500,200],[1.5,2.0,60,5000,190]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "15", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", @@ -244,4 +242,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json index 7300c45c8d..df9ee89c29 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "jgP5JZdbxUbg8lfB", "name": "0.08mm SuperDetail @Creality K1 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "jgP5JZdbxUbg8lfB", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json index adc86b4768..31523e47f4 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "715XKCccsul5FKvC", "name": "0.08mm SuperDetail @Creality K1 Max_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "715XKCccsul5FKvC", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json index 976756a212..626636bc5d 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "OhhZPXABlfjJun3o", "name": "0.08mm SuperDetail @Creality K1C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "OhhZPXABlfjJun3o", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json index 6748914ae7..b16583d310 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "DMPF0xf2yvEWmu4L", "name": "0.08mm SuperDetail @Creality K1C_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "DMPF0xf2yvEWmu4L", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json index f3f37caca7..c857595ddb 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1Max (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "CaqcNDTSGWeJ81xw", "name": "0.08mm SuperDetail @Creality K1Max (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "CaqcNDTSGWeJ81xw", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json index 0144a35372..474a37c964 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ZqIhsxrzqVs6cFvM", "name": "0.08mm SuperDetail @Creality K1_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "ZqIhsxrzqVs6cFvM", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json index 7690eb0206..8bf4ce990c 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json index 229c5be38a..7edb449976 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "VK8qeRg8ZEHRo2Rk", "name": "0.08mm SuperDetail @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "VK8qeRg8ZEHRo2Rk", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,7 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -242,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json index 26e877b4bf..3db7735d91 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "d22VPSF1SXi5gPOI", "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "d22VPSF1SXi5gPOI", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -241,4 +239,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json index f9b00d5283..cd8fe57a81 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "T181USiYx4xlKGI9", "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "T181USiYx4xlKGI9", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json index 11833d41bc..822b4ce721 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json index 2edfea780c..de6729076e 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "Qq07eSaIWdVHr9mr", "name": "0.08mm SuperDetail @Creality K2 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "Qq07eSaIWdVHr9mr", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,7 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -242,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json index 94b622d674..ae638706d1 100644 --- a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "1PSmepdqo0eFyI23", "name": "0.08mm SuperDetail @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "1PSmepdqo0eFyI23", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "20", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -154,7 +152,6 @@ "slowdown_for_curled_perimeters": "0", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "1", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "80%", diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json index fbf0043f01..262ad0538c 100644 --- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json index 6bf1baf2d2..c8e196966b 100644 --- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "V2oWbmagKmmoxbv3", "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "V2oWbmagKmmoxbv3", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -241,4 +239,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json index d104a68e6a..d25fe06205 100644 --- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Pro 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json index 16bc203a9c..bcdad2f20e 100644 --- a/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "GqPrfjfOMnakeSmK", "name": "0.10mm HighDetail @Creality SPARKX i7 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "GqPrfjfOMnakeSmK", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -176,7 +174,6 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "4", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "100%", diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json index d8e1f7255d..db8752f98d 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json index 2003ecc36d..27e4e5d21a 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "RxVB6dYHB7XghTJM", "name": "0.12mm Detail @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "RxVB6dYHB7XghTJM", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json index d2c0488bd9..b33edd07d6 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "4QIsAhoHoAXDecGF", "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "4QIsAhoHoAXDecGF", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -241,4 +239,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json index 6abaf12607..7571ba459e 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "fY34NxARSSe2qjvw", "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "fY34NxARSSe2qjvw", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json index 3936bfee46..569f61bcd5 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json index 0c06c325fa..8220879a98 100644 --- a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "g1QZLRXoH1joFYs3", "name": "0.12mm Detail @Creality K2 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "g1QZLRXoH1joFYs3", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json index b753d5d697..dc15cc7123 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10Max.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "eeiPSOyL4ergqQ07", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json index 420946637a..63bf9e3041 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "wrSsDTXZmqGP7jI6", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json index 080d492adb..0060f44220 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cDZYl2hgnh7Cc99L", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json index fdac5e080f..7ae0e8f685 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "tSCiJ9olpnfuFwwH", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json index e6d532895c..0b0eaa5cb6 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality CR10SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QheGOjs9kbqt0RIz", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json index 9d3526378a..41f8e5b490 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "TduEizRFdShIDRcm", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json index e54dac4c6f..10c03ba2a4 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Vkv3aPxQr9VEJvaF", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json index dc47420779..8be588c2d6 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Oc6OFEFHUMPYMB63", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json index 25c255507a..b87ff8fad8 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "UntNzp8KmgY2dJp5", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json index bdbcde0c09..2abe6f6862 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "29EqYizz07WCqLH6", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json index e094dec366..cd3243dc7d 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Ud8sbqOYEtSQQT6z", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json index f04f45f8fb..93e4e9b816 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "NZt7TVAsYcO4KVUO", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json index 4a98444b8b..0dfcd85243 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3 Pro 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "hYyzb4pWqSMccfku", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json index 0c89db070e..1ef7613160 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "BYotUlZcqUXYiUJD", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json index f5f2c12992..111278f30e 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V2Neo.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cRgPV5JRbPRakGVF", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json index 311aa9f18b..f48c53a417 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Rs3jP38ZEjdPihGT", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.12", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json index a9beb01fcf..332c15154f 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "EJAHGtrssuw5Z6ul", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json index 82c3f7e5f9..b31ed27ee6 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3Plus 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "qPcJyOUL611jQfcb", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.12", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json index 812595bf28..411ea32b28 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "JM7OGS3Cjxqg6wFn", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json index c01491ecfa..9e4bb3c054 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.4.json @@ -6,7 +6,6 @@ "from": "system", "setting_id": "W68mSPdmat2rCXuD", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json index 797cbcafc9..66a4aa97e0 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "WS8Z9BGDgjWP3pQJ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json index 202ac828bc..5bcec917a2 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "kkfspmZozKFg5BA4", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json index d452d0e75e..753f7dee03 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Ender5Pro (2019).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "pMT5vO5IBWX9wZLG", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json index d332eeaf3b..13ab3bb638 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality Hi 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "BqQTYLbb22LCHEJN", "name": "0.12mm Fine @Creality Hi", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "BqQTYLbb22LCHEJN", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", @@ -264,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json index 56e76e7a03..b871ea6cdb 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 (0.4 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "g6zPlZ8mKj4YHC9l", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.12", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json index 0d9c5f4f5b..b54cb6302f 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1 SE 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cAcjLnedHgi2zJ05", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.12", @@ -116,4 +114,4 @@ "xy_contour_compensation": "0", "gcode_label_objects": "0", "precise_outer_wall": "1" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json index 00e10594e3..cf08bcd873 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1C 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "G93LbyixXNXBiA0c", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.12", @@ -115,4 +113,4 @@ "xy_hole_compensation": "0", "xy_contour_compensation": "0", "gcode_label_objects": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json index 0afe3367a5..fc5daba4ac 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality K1Max (0.4 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "hfAhnivnymhUKkuS", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -31,7 +30,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.12", diff --git a/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json index db05c36733..97da9d42d5 100644 --- a/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.12mm Fine @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "gHnRFCfQOiqEOQhq", "name": "0.12mm Fine @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "gHnRFCfQOiqEOQhq", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "20", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -174,7 +172,6 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "1", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "80%", diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json index 23ee07ff02..dca59ca762 100644 --- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json index acdb2c2403..59fc3954db 100644 --- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "AgwKETM82R6PNW8u", "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "AgwKETM82R6PNW8u", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,100,6000], [1.0,1.5,80,5500], [1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json index dc2ded50f4..af11446856 100644 --- a/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.14mm Optimal @Creality K2 Pro 0.2 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.25", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json index e04a25a2e7..997f874554 100644 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality CR10Max.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "AhVlBBKSgNv8gtzF", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json index 91fa465acc..979f70e7a5 100644 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender3V2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ZlLapzGj5AcZJW7n", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json index cae991ff76..f731a0fbac 100644 --- a/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.15mm Optimal @Creality Ender5Pro (2019).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ysg14LXoki3gnanY", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json index aeb29cee0a..f85c92a4e5 100644 --- a/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Fine @Creality Ender-3 V4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "cFlbPrdjMi4CLWZF", "name": "0.16mm Fine @Creality Ender-3 V4 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "cFlbPrdjMi4CLWZF", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -263,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json index 44e22d33e9..c5dc0794c6 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR-6 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "hB2b43wb6zlKNwM7", "instantiation": "true", - "adaptive_layer_height": "1", "brim_object_gap": "0", "brim_width": "0", "default_acceleration": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json index 77f4e754f6..9f69042388 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "KJS40SDSHBwiqODl", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json index 336e78ac1c..866a2c05d9 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "0MJLzTqNgW25Uheg", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json index 1f1a708b4b..d3a63e4193 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "N8cFrOUSa1yfMrv0", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json index b98f76289e..82c26510c7 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cjrvnlS7gkkm0pNy", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json index 067aa42760..a0c88be82a 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality CR10V2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QussxQZJlCnscRO8", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json index a41f412f45..1664978e87 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cply3AO1zRZSsHgR", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json index 9a42f54448..ac767b8490 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "11bH6lpigIvL8u8f", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json index 0c74372dee..2a5050d2b7 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Fke1V31Lx19EoKIA", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json index 0ecee26eb0..329db47286 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "9fSweJ4F7gua7Uc7", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json index e2ab351bc7..4096165c24 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "DwpNJnb8eEz7L9Bb", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json index c21dcdd143..ed65a2fb18 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "43mtG5xlkphvMKKd", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json index c8f9692039..9425a012a8 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Jhb6GdIOKHntN1Ya", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json index a90a14ce26..4dd044f031 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3 Pro 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "fxgj9J397IulykPl", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json index 1adc7edee9..16ef9d5d29 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "O0dOiNS7TEZtCZ8R", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json index 6ec52bb438..90151f2c75 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "eWDWBHYshBLl925f", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json index dc0b13a54d..de800c7b94 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "HjQX9RTDFKq7QGtA", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json index 4dca077fd8..9030c8abe9 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "sFUH487ulcosG1Aj", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json index 0b360bbdf5..95b568b104 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dDjBGlXptHbFRkZe", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json index dc75dd8a6b..42661ac38d 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Pro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "XL3fQRXNDiWlirhY", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json index ee244e17c8..423c828055 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V2Neo.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "aoBTpFYHhbpg1kuj", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json index c3487fcff2..e361cd3784 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "2Nrbq8PxssUPBLza", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.16", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json index 3ae447f19b..ab29d7af18 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ujKrpcMbGeL1pnX6", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json index 9139a9ab80..63a173201c 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3Plus 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "eni3OChSXVGLB0NB", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.16", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json index b7113edd45..9691a8e555 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "CSSjT637cJ1BSrDa", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json index 052142f6ec..7970cd9ec4 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.4.json @@ -6,7 +6,6 @@ "from": "system", "setting_id": "jvnrh3jh6Btbs1Ja", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json index 1bc4ed673f..5a8f264e9b 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "oFqTILkrvntT8uHM", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json index 676751fa1e..a9e589bf62 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "kLTt1KBtPskehSHv", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json index 8912d61ace..837a2b1a56 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dIPbjfE0UjFaq6YU", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json index 704cd3756a..569e6c021f 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "A7RB0AQ0t1UkCN5G", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json index fb485bbf21..d59abbd109 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "qVu6mv4sVrVzWxvy", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json index 45d61838d5..a5ce9a6b3a 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender5S1.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "03w4e0cMfUFjZcv6", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json index 4669bff842..8e1c2e74f8 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Ender6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cjGhLiKivneRnlNJ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json index 77b1295186..6f7f4a0154 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Hi 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "NtD3nnUvAO8aSUDJ", "name": "0.16mm Optimal @Creality Hi", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "NtD3nnUvAO8aSUDJ", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", @@ -264,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json index d6caa5e775..7c9548b0f5 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "A0a8psWEQGdmYiPj", "name": "0.16mm Optimal @Creality K1 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "A0a8psWEQGdmYiPj", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json index a1896fa377..f3b0e35677 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "BQiQnQJpN2Yy4c7u", "name": "0.16mm Optimal @Creality K1 Max_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "BQiQnQJpN2Yy4c7u", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json index 087d90a584..bece32d26b 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "xHoh6Y8AfDzNA5Mf", "name": "0.16mm Optimal @Creality K1 SE", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "xHoh6Y8AfDzNA5Mf", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,8 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -264,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json index 62708a822a..07778ded42 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ZhEEAnJ5eh6QES40", "name": "0.16mm Optimal @Creality K1 SE_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "ZhEEAnJ5eh6QES40", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -263,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json index 5deb17002e..c4952f98a6 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "i25lsWBmZF21XcdV", "name": "0.16mm Optimal @Creality K1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "i25lsWBmZF21XcdV", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json index 2365a82d31..3165987f20 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "CpdVjCmJkN3pWssv", "name": "0.16mm Optimal @Creality K1C_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "CpdVjCmJkN3pWssv", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json index 02507c806f..dd4772c4d0 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "IN9EjcbeLmwzyIrt", "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "IN9EjcbeLmwzyIrt", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json index cda928b2e7..8c67647925 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "a76Q90iyWf1az7Fv", "name": "0.16mm Optimal @Creality K1_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "a76Q90iyWf1az7Fv", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json index d8e00651f2..61d916d5ba 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "xcJYMZt1N40vmszc", "name": "0.16mm Optimal @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "xcJYMZt1N40vmszc", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json index 1f9b68b300..e4337f090c 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "Qh4PUdesKrjSUXFm", "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "Qh4PUdesKrjSUXFm", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json index 80277008a0..df397e484f 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "FCUUtHpYIxeokc0a", "name": "0.16mm Optimal @Creality K2 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "FCUUtHpYIxeokc0a", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json index c23d00fba0..a5baecce55 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "8z63KIGeDgitLqPe", "name": "0.16mm Optimal @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "8z63KIGeDgitLqPe", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "30", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -174,7 +172,6 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "2", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "100%", diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json index 1500b58edd..8a5cb6d850 100644 --- a/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality Sermoon V1.json @@ -34,7 +34,6 @@ "inner_wall_acceleration": "6000", "inner_wall_line_width": "0.61", "inner_wall_speed": "195", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_line_width": "0.32", "internal_solid_infill_speed": "195", "ironing_flow": "10%", diff --git a/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json index 4511db51d8..e21d0b231a 100644 --- a/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.16mm Standard @Creality K2 SE 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "KopqA4S2dMBSCBSD", "name": "0.16mm Standard @Creality K2 SE 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "KopqA4S2dMBSCBSD", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json index c6aff2c46c..62262e67cc 100644 --- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json index 9111e8a395..84c61a1cf3 100644 --- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "3wVXi8pXkGNmKm53", "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "3wVXi8pXkGNmKm53", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json index d2299f536e..ec97ecf362 100644 --- a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Pro 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json b/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json index 40475733fd..6d1c733aaf 100644 --- a/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json +++ b/resources/profiles/Creality/process/0.1mm Standard @Creality Hi 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "tkSkduU7S0ysAtM7", "name": "0.1mm Standard @Creality Hi 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "tkSkduU7S0ysAtM7", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", diff --git a/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json index 422e928cc0..422d65d29a 100644 --- a/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm High Quality @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "UR1b2Z2o4t2uXsDO", "name": "0.20mm High Quality @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "UR1b2Z2o4t2uXsDO", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json index 702fcf8ea8..dd416019bd 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10Max.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ZShSFfwlxaYTLPyk", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json index d540f01b05..c632f50d4e 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "SUpsCvktcGgKFOwG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json index 2ed8c6707f..d9fb92fa07 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Mi0CWgKQO5QtCUgX", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json index 36616153a4..62e00bd7c9 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ogY513sf2Ht92CNe", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json index fe5cba1347..36c9f430d3 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "athOsWrvUS4bdchK", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json index 4a37e7aed6..339f526068 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "pRsZ1fGFRb5LxTi6", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json index 8d5f34c010..6a21dbbb0f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "oThS7cBtZl2ycbIR", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json index d468da293f..17fc2be073 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality CR10V3 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "BDjZsZ3Eron3yC6o", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json index b6d6703693..5f373ce662 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-3 V4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "V6277KGs62IwLGt2", "name": "0.20mm Standard @Creality Ender-3 V4 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "V6277KGs62IwLGt2", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json index c8decdadad..2e08e610f9 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender-5 Max 0.4mm nozzle.json @@ -126,7 +126,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json index 84722ac71c..f1cfbfe8f3 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "NUOwkxvz6bzH12be", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json index 9e7ec845b1..b27666455f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "aPYE2hHFn4jp6hHd", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json index b24bac30e1..ee6e2ed895 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "iuwxYTfWfZ4RyZEg", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json index e85725b2db..0a9358e108 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "fhwVxG08WJloBcrL", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json index 6912aaebab..0c2b09e737 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "V3Ik8iTHlZh5QNKm", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json index 3e1b899446..b93111451e 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "g5sSMikMlHAPS2go", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json index 9ddf750136..c190f844a8 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "vuh1vEUnXIvFGssp", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json index 537fff135e..260cb03123 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3 Pro 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "l6niLUptIm4MfRTB", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json index 9abea8d074..dc1e84e791 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "XzSinPHka1JNcgdc", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json index c8e6b39c19..1c2f7de443 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "6n6QHp6IAmmgmTy7", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json index 9aba5bb71d..6d9ab2fe28 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "BmsBXICyG0DusAHS", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json index 219119b0b9..cd152d2d75 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "FFWB7dkbWTGsR5a1", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json index 71fadd1ded..e97c038247 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Fo07KIkbZydVaBgi", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json index 4ce194a79e..49582a273f 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Plus 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "FiSvC283VqqMpr41", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json index 022e911acc..19346b5d19 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3S1Pro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dPims9blQsZMrtnN", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json index 0e16e788ef..c20ff406ed 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "pmPzGC04PU62qjcz", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json index 89c4f56fa8..1862dc394d 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V2Neo.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "bVXaGFQ7f2jkilWk", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json index 0f5aae0bd6..1cf983d9bd 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "wG01ybBcp59pX5lB", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json index 4041987d50..f01fbe0a46 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "H198VcahxwpEdma0", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json index 97892cc203..74a046068b 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3Plus 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "rG5BalEQ9WpjxWXr", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json index cdd841907d..05e6f8075d 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "JrWxHTh4DZ7zRaog", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json index a5ea94dfcc..12caa25379 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.4.json @@ -6,7 +6,6 @@ "from": "system", "setting_id": "YLkw9eyyK7cm97ek", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json index 694492b626..52c9d083dc 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "8xefmMVdxxfX5MTl", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json index ec49bea8c6..f9776005d8 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "DLABbffpOkmSzZrG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json index 7d4eef8be2..efaba44268 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "8Ok1ykiLVdEftiJO", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json index 4de5bed1c6..a1ad472270 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "y5dNuwrcPQ1xUKOM", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json index 3abc3478f3..4c9413c6e1 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5Pro (2019).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jy8Ih6XxbX6mY2Z2", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json index 9dfdc2bc12..761c7164c8 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "5x3ZLLMD1JScujiM", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json index 5546e8b916..fac00205d0 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender5S1.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lRpMOtyu8tTd4q5C", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json index 98e7815784..3ffeed2563 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Ender6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "HWmFUQgTTKxAkHnA", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json index 5a5b6096a0..36e31c387e 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Hi 0.4 nozzle.json @@ -187,8 +187,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", "prime_volume": "45", @@ -266,4 +264,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "90", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json index eaaeb4529f..0a1aa84ab7 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 (0.4 nozzle).json @@ -182,8 +182,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "30", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -264,4 +262,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json index 1a4bd4a3f3..1d3aaa5305 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "aBAXeSGAYu5QgS8m", "name": "0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "aBAXeSGAYu5QgS8m", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json index 19b01a9964..343dc08735 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE 0.4.json @@ -179,8 +179,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", "prime_volume": "45", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json index b7365760f4..020d100487 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "RBEfIJsnl68JBPDc", "name": "0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "RBEfIJsnl68JBPDc", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json index aa8e7b440a..cc45207d21 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C 0.4 nozzle.json @@ -182,8 +182,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -264,4 +262,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json index 882703434d..d5f8e9f5a9 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "KXIWcAo9MAwFwT70", "name": "0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "KXIWcAo9MAwFwT70", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json index 51ada298d8..b49612f90d 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1Max (0.4 nozzle).json @@ -182,8 +182,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "30", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -264,4 +262,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json index 85dd6bbf3d..6a48c91240 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K1_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "x8wjQRt9jfXwd6cJ", "name": "0.20mm Standard @Creality K1_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "x8wjQRt9jfXwd6cJ", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json index ab4c3c4581..f0678f0fb0 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "4xypdknoIfLrsbrs", "name": "0.20mm Standard @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "4xypdknoIfLrsbrs", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -270,6 +269,5 @@ "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", - "xy_hole_compensation": "0", - "overhang_totally_speed": "25" -} \ No newline at end of file + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json index 9faaa2515e..b3270bcfc1 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json @@ -172,8 +172,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "prime_tower_brim_width": "3", "prime_volume": "45", "print_flow_ratio": "1", @@ -243,4 +241,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json index d46a33f97e..7ef44f3d9a 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Pro 0.4 nozzle.json @@ -180,8 +180,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", "prime_volume": "45", @@ -266,4 +264,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json index 39876b77dd..debcf747fb 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 SE 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "eXLuYlHmWAomEpIp", "name": "0.20mm Standard @Creality K2 SE 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "eXLuYlHmWAomEpIp", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json index 11e1f6ed45..19e58926e3 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "VxY2jazB2Kn4930i", "name": "0.20mm Standard @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "VxY2jazB2Kn4930i", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "15", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -176,7 +174,6 @@ "small_area_infill_flow_compensation_model": "0,0;\n0.2,0.4444;\n0.4,0.6145;\n0.6,0.7059;\n0.8,0.7619;\n1.5,0.8571;\n2,0.8889;\n3,0.9231;\n5,0.9520;\n10,1", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "2", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "100%", diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json b/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json index d06447035a..35a4cab279 100644 --- a/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality Sermoon V1.json @@ -34,7 +34,6 @@ "inner_wall_acceleration": "6000", "inner_wall_line_width": "0.61", "inner_wall_speed": "195", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_line_width": "0.32", "internal_solid_infill_speed": "195", "ironing_flow": "10%", diff --git a/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json index e98933167c..68eb579518 100644 --- a/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Strength @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "wApX9tYxw2iElGhq", "name": "0.20mm Strength @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "wApX9tYxw2iElGhq", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", diff --git a/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json b/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json index d84217d2ff..944efd7c84 100644 --- a/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json +++ b/resources/profiles/Creality/process/0.20mm Ultrafast @Creality Ender-5 Max 0.4mm nozzle.json @@ -128,7 +128,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json index 010b4aecbf..ee41e3758a 100644 --- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json index 0d11e5ac33..87c0158459 100644 --- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "fIlqMCEz5fbmGHKW", "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "fIlqMCEz5fbmGHKW", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -241,4 +239,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json index 4e6400fb7c..a7ac8696b2 100644 --- a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Pro 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json index 0b24f4d0b7..30dceb8779 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10Max.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "5RGkaM3sTHAC90DK", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json index 5b1ef5fde1..995a5865a4 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "mEhTPVNyKIXwHM6R", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json index 19d6768727..7d9b92f31e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "qZkT2BU9Kg4n9tnF", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json index 68257a4de4..6da20505ee 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "g0NQSWW3BZbgAMRl", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json index 0c9c307c6b..528033e0ff 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality CR10SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ZdimPQfRwZ0VDiZM", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json index 494a97b4e4..65d672322e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender-3 V4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "JxRqFqk1obhdGIKZ", "name": "0.24mm Draft @Creality Ender-3 V4 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "JxRqFqk1obhdGIKZ", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -263,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json index 6f950b8905..321a209d41 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "5bb8SQOestc8UdQe", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json index 5458a1290e..a7eeb4b431 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "sP41jQScaMnkdanj", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json index c2cffefbc8..0f72e86f78 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "5z5F9heoZFK48zCY", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json index 5b0b8ef11a..bb97f10bd8 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "61RvRyfbHgGvr6eQ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json index 6dfcdc172a..ae13bbdc2e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "nDVndS7HUxU2wT2D", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json index f0e543f232..b75a5f183d 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jGm1nCGpwxxtCtvT", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json index 80ee65edbd..435d40e856 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "2eTryig3fd51wgQ3", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json index ad27324794..80677ecbe6 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3 Pro 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "3Q7LIYMDI349jST9", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json index 653d012433..40969e1d77 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ZLzHZO4Db6sjb1f1", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json index 231e7a82ff..2366b2862a 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "mxnyxP2RYe284OB7", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json index a55b4541b3..5889b22d33 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "5sa2VFy1tjN907oW", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json index e20cc6741e..2790d07d1b 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3S1Plus 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "MadcYvntjYi46IDu", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json index 5b8482f537..af0c60205c 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "u9TtIf0XBhnWrwND", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json index 73c5f253ce..d7ad5c5844 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V2Neo.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "De7wK4KBVZ2BzRx5", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json index c4669560cf..67dd47f057 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "O0jM8sqvBLR5aNfE", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json index f4374f84d0..7e6bde3e85 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7ZtffBsXW6wPWj7k", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json index 0c781beb53..de48c92b5a 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3Plus 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lH3j14miQE62zlSj", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -34,7 +33,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json index 93a2507428..27b156c5d7 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "0SJNhii84pYiz380", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json index beefae6aa5..94e6d6d0f6 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.4.json @@ -6,7 +6,6 @@ "from": "system", "setting_id": "Hg10EUNCLMEYYBN1", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json index 17015f12de..a40edcd2e2 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "6F8olUrpFz6cSOfX", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json index f0c9c02f7e..d5970f77bc 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3SE 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "L6Qdsyt0yW2TCRyk", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json index 0d210f5c9f..389f793d31 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Ender5Pro (2019).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "k1Qi7hPIAi1qp7cA", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json index 1fce19f64e..1cc8cfed58 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality Hi 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "csR8yY0OEnt7SU6T", "name": "0.24mm Draft @Creality Hi", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "csR8yY0OEnt7SU6T", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", @@ -264,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json index ce0abbf5ac..1c72943250 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "NGQAnSKnUVHcq0sR", "name": "0.24mm Draft @Creality K1 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "NGQAnSKnUVHcq0sR", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json index afd921a54b..a4bde680d7 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "Lxyn5qXHZh4GIGS1", "name": "0.24mm Draft @Creality K1 Max_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "Lxyn5qXHZh4GIGS1", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json index 34a577c896..53e2e515f4 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "KJc1HuWgcYJkoy32", "name": "0.24mm Draft @Creality K1 SE", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "KJc1HuWgcYJkoy32", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,8 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -264,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json index 3522e46d5a..dd17499dfd 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "dPPC73WnlF20wbsm", "name": "0.24mm Draft @Creality K1 SE_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "dPPC73WnlF20wbsm", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -263,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json index 697593d8c4..685f7fb7a3 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "POMxfD8I0LnZO9CB", "name": "0.24mm Draft @Creality K1C", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "POMxfD8I0LnZO9CB", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json index b3bf816290..c081aa886a 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "wGXybdgPzFWozZLw", "name": "0.24mm Draft @Creality K1C_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "wGXybdgPzFWozZLw", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json index 9f886804e3..eeccdcc58e 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1Max (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "rIeugRR6BYXplcpT", "name": "0.24mm Draft @Creality K1Max (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "rIeugRR6BYXplcpT", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json index 16ebf21b9a..28c0573cff 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K1_CFS-C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "vGw6lrXZLHRNpR6r", "name": "0.24mm Draft @Creality K1_CFS-C 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "vGw6lrXZLHRNpR6r", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,7 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "0", "prime_tower_enhance_type": "chamfer", @@ -265,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json index cb761dd7cd..263a8b2c80 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "G1PKSuPoCcbIA7Yh", "name": "0.24mm Draft @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "G1PKSuPoCcbIA7Yh", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json index 4676faab10..ab8447edf4 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "sPONNeyRg4CxHD1r", "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "sPONNeyRg4CxHD1r", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json index 7c1f71451e..51e23a19c6 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "7V16er03IuXDpO4U", "name": "0.24mm Draft @Creality K2 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "7V16er03IuXDpO4U", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json index f8c9f5dea6..caf35701c4 100644 --- a/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "1E0byJ2cjuoubstC", "name": "0.24mm Draft @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "1E0byJ2cjuoubstC", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "30", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -174,7 +172,6 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "6", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "100%", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json index 5d8dd67e1f..478422242f 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "s3qAAYV2gY2x4rrB", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -31,7 +30,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.24", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json index 1d9da9088e..ffe2624415 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Ender3V3Plus 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "w5MuLpLSpMMuLXwf", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -31,7 +30,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.24", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json index edb3f7e2db..c4f3b2f024 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality Hi 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7uxCpPqUS9Lz1TK8", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -33,7 +32,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.24", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json index 3af9088dcd..f8e4b74c0c 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1 (0.6 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GDs3Z2oIlW5O1tCx", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.24", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json index 9e582fad28..1595bb641e 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "eF3su8pOiDbEHiOy", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.24", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json index cf81e4557b..95dc5074d5 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K1Max (0.6 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "IZxO4Gmrh0sqyiC8", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.24", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json index d57ff66332..cf188dace1 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json index 7cefcf50f9..0cb962d8f0 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "rFcFwPDRfrVVWCmp", "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "rFcFwPDRfrVVWCmp", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -241,4 +239,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json index 8a246c2245..4255d84839 100644 --- a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Pro 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json index ab6b0843f4..ae766b65ff 100644 --- a/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.24mm Standard @Creality K2 SE 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "7DN0tghSeRVYQcde", "name": "0.24mm Standard @Creality K2 SE 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "7DN0tghSeRVYQcde", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json b/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json index b67ba120ee..0a403950b9 100644 --- a/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json +++ b/resources/profiles/Creality/process/0.28mm Standard @Creality Sermoon V1.json @@ -34,7 +34,6 @@ "inner_wall_acceleration": "6000", "inner_wall_line_width": "0.61", "inner_wall_speed": "195", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_line_width": "0.32", "internal_solid_infill_speed": "195", "ironing_flow": "10%", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json index fcd0453ca2..c3f66146d0 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "nuR9SZ4PCShEC1Cw", "name": "0.28mm SuperDraft @Creality Ender-3 V4 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "nuR9SZ4PCShEC1Cw", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -263,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json index 4ca758ed55..4c2962dd26 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "aQmsfZyAfVbBZ9Lh", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json index 79a99fa000..9eba8aff2a 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "oFne48238nyyTRRV", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json index 9b6cbd3e33..6ac861cab4 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "1ByZYdK7bEtBcJGG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json index 59bd2ac292..3ae69265a6 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "3uR1DRElzIYQ9TDK", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json index 700148dc36..ee377bed8a 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "OWrIrHWU7qzlQyqs", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json index 5a871b4730..ce72fbf16b 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "yMRcZG70S3Vgb3Qh", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json index 2693520fa5..6231185dad 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "N90MCWu17jFkXr2H", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json index 992fc85d7e..364fab8fa5 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Ender3 Pro 0.8.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jFWnCrXEW5bNSLzq", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json index a416d5e082..a7f11d9c78 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality Hi 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "XLp864DPRIWcjHvv", "name": "0.28mm SuperDraft @Creality Hi 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "XLp864DPRIWcjHvv", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,180,5000],[1.0,1.5,160,4000],[1.5,2.0,150,3000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", @@ -264,4 +262,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json index 5686279f27..f6589c4826 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ELCUvdTCSg4N4HVC", "name": "0.28mm SuperDraft @Creality K2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "ELCUvdTCSg4N4HVC", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json index 3b2f7e5cc1..2311278057 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "lFZeFNWUsNRW3bvN", "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "lFZeFNWUsNRW3bvN", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "50", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json index 39760a5c12..6d7f955897 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "KO1MgETYTo42CfhQ", "name": "0.28mm SuperDraft @Creality K2 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "KO1MgETYTo42CfhQ", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -131,8 +131,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -266,4 +264,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json index e0538e6868..142f71e8bb 100644 --- a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ruhDJCxvTN1nB60Z", "name": "0.28mm SuperDraft @Creality SPARKX i7 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "ruhDJCxvTN1nB60Z", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "30", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -174,7 +172,6 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", - "smooth_coefficient": "6", "smooth_speed_discontinuity_area": "1", "solid_infill_filament": "1", "sparse_infill_acceleration": "100%", diff --git a/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json index b3499fa406..32a280fd55 100644 --- a/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.2mm Standard @Creality Ender-5 Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "bG25lTbxHzhcGGQg", "name": "0.2mm Standard @Creality Ender-5 Max 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "bG25lTbxHzhcGGQg", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess_enable": "0", @@ -128,7 +128,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json index 248cfee870..75bd7bb2e1 100644 --- a/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json +++ b/resources/profiles/Creality/process/0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "7i9DCEZHvxgrYciY", "name": "0.2mm Ultrafast @Creality Ender-5 Max 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "7i9DCEZHvxgrYciY", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "25%", "acceleration_limit_mess_enable": "0", @@ -130,7 +130,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json index 14950f486e..f13e0672f3 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender-5 Max 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "eoPcs8fDihwCYFUB", "name": "0.30mm Standard @Creality Ender-5 Max 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "eoPcs8fDihwCYFUB", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess_enable": "0", @@ -128,7 +128,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json index 92a4a8fc48..87930f8456 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "KZjGEI0aqppw5c55", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json index f1f3d5ce1a..9d192b3877 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Ender3V3Plus 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "MX5VSmoPcOiBESP3", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json index a0bce0af8a..d77680e241 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality Hi 0.6 nozzle.json @@ -185,7 +185,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", "prime_volume": "45", @@ -263,4 +262,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "90", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json index a4bd5b2abc..9370ba6586 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 (0.6 nozzle).json @@ -181,8 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "15", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -262,4 +260,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json index d4073f4221..29e07b4305 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1 SE 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "qd4AsuXVsp5pvPg4", "name": "0.30mm Standard @Creality K1 SE 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "qd4AsuXVsp5pvPg4", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess_enable": "0", @@ -128,8 +128,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json index 3f86d9e613..e8dbe2f076 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json @@ -181,8 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "15", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -262,4 +260,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json index 54ac0870a4..07539ae51a 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K1Max (0.6 nozzle).json @@ -181,8 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "15", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -262,4 +260,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json index 71facd89ff..fa678432b0 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "nRmO47B1VhqIi2KU", "name": "0.30mm Standard @Creality K2 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "nRmO47B1VhqIi2KU", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess_enable": "0", @@ -123,7 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -254,7 +253,6 @@ "material_flow_dependent_temperature": "0", "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", "min_length_factor": "0.5", - "overhang_totally_speed": "25", "prime_tower_enhance_type": "chamfer", "print_order": "default", "scarf_angle_threshold": "155", @@ -272,4 +270,4 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "speed_limit_to_height": "[[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]", "wall_direction": "auto" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json index 216d964e6e..b414b50315 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json @@ -171,8 +171,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "prime_tower_brim_width": "3", "prime_volume": "45", "print_flow_ratio": "1", @@ -241,4 +239,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json index 2bf82bc989..677f36d515 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Pro 0.6 nozzle.json @@ -180,8 +180,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", "prime_volume": "45", @@ -266,4 +264,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json index 4da92d3732..b0ff7dc5aa 100644 --- a/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality SPARKX i7 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "obWYPAVrLuKr93Xe", "name": "0.30mm Standard @Creality SPARKX i7 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "obWYPAVrLuKr93Xe", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json index c9a7069a2a..8af2bedd6f 100644 --- a/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.30mm Strength @Creality K2 Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "h9vwxtNQGvgHVldi", "name": "0.30mm Strength @Creality K2 Plus 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "h9vwxtNQGvgHVldi", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json index 24fedd0965..3f0410b08f 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1 (0.8 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Rc7DUtP8slk0zORl", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.7", "initial_layer_print_height": "0.32", diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json index 2823947840..ba7e74b9a4 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "8Yz1tYKgOhlRhEFw", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.7", "initial_layer_print_height": "0.32", diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json index 40f87281de..2f03446779 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K1Max (0.8 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "yDUagPaIFkVkQ7aL", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.7", "initial_layer_print_height": "0.32", diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json index e376b9dfe3..cd7aaf30b1 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json index ca58516410..969f802a02 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "wUXKe2HJBnrZhwCJ", "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "wUXKe2HJBnrZhwCJ", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000], [1.0,1.5,80,5500], [1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json index 0308bb49f6..d0566f4bc1 100644 --- a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Pro 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json index f12fb8b016..1886dd1561 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "5L1oQB22HBdoaocC", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.36", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json index 7a1a3c401d..b3e49730a3 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Ender3V3Plus 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "r3dweAtprgzF0jON", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.36", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json index 0ada896430..929f9951eb 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality Hi 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lD86ZxmhqaFLOXs7", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -33,7 +32,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.36", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json index d3de4eb889..002d380f9f 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1 (0.6 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "XCDNFQBF7Kx54Z2Y", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.36", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json index 86e132abb4..620d9cc2df 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "3yO02rZelrUrGct2", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.36", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json b/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json index 69d90fbef6..d4f253fa0c 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K1Max (0.6 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "OzKdcW8QjYz9Ekfg", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.36", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json index da7ca48be3..5e4b57e685 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json index 8edd6e869f..81191f9511 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "psLMoG691hQ5PSrK", "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "psLMoG691hQ5PSrK", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -241,4 +239,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json index 955f1332ed..55a9d77ea2 100644 --- a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Pro 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json index 15943f5c2c..c51f64becf 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality Ender-5 Max 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "7HQvsdltfdC8N5Hw", "name": "0.40mm Standard @Creality Ender-5 Max 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "7HQvsdltfdC8N5Hw", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess_enable": "0", @@ -128,7 +128,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json index aa0efb8f49..5f625055bc 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality Hi 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "1xCIS6DBlkVcCLSf", "name": "0.40mm Standard @Creality Hi 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "1xCIS6DBlkVcCLSf", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -129,7 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "1", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "cone", diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json index 2de391b8ad..ba5420a888 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 (0.8 nozzle).json @@ -181,7 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -261,4 +260,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json index 88bc46add2..4d73fdaa0c 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1 SE 0.8 nozzle.json @@ -181,7 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json index 5cd1a9cb6a..e8b1548947 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json @@ -181,7 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -261,4 +260,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json index c1c968cbb6..e245d5acd2 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K1Max (0.8 nozzle).json @@ -181,7 +181,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", @@ -261,4 +260,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json index b084f1cf47..00160429ce 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "mvjFUBLuSrZ1fm1e", "name": "0.40mm Standard @Creality K2 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "mvjFUBLuSrZ1fm1e", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "acceleration_limit_mess_enable": "0", @@ -123,7 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "40", @@ -254,7 +253,6 @@ "material_flow_dependent_temperature": "0", "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", "min_length_factor": "0.5", - "overhang_totally_speed": "20", "prime_tower_enhance_type": "chamfer", "print_order": "default", "scarf_angle_threshold": "155", @@ -272,4 +270,4 @@ "small_area_infill_flow_compensation_model": "0,0;\"\\n0.2,0.4444\";\"\\n0.4,0.6145\";\"\\n0.6,0.7059\";\"\\n0.8,0.7619\";\"\\n1.5,0.8571\";\"\\n2,0.8889\";\"\\n3,0.9231\";\"\\n5,0.9520\";\"\\n10,1\"", "speed_limit_to_height": "[[100,150,100,6000],[150,200,80,5500],[200,250,60,5000]]", "wall_direction": "auto" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json index 3baf52acf5..4452d1a7bb 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json @@ -171,8 +171,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "prime_tower_brim_width": "3", "prime_volume": "45", "print_flow_ratio": "1", @@ -241,4 +239,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json index df23b1f46c..64c18db3e6 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Pro 0.8 nozzle.json @@ -180,8 +180,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "20", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", "prime_volume": "45", @@ -266,4 +264,4 @@ "wipe_tower_extra_spacing": "100%", "wipe_tower_rotation_angle": "0", "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json index 13c3d5986f..675dabd694 100644 --- a/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality SPARKX i7 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "auHhZ5g7PonLi942", "name": "0.40mm Standard @Creality SPARKX i7 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "auHhZ5g7PonLi942", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "acceleration_limit_mess": "[[1,1.2,150,5000]]", @@ -129,8 +129,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "20", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_enhance_type": "chamfer", diff --git a/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json index c164cd88d4..aabb6ed9b2 100644 --- a/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.40mm Strength @Creality K2 Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "DPs3K2D8t8dGscqK", "name": "0.40mm Strength @Creality K2 Plus 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "DPs3K2D8t8dGscqK", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess_enable": "0", @@ -123,8 +123,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json index d732c7015c..d131d479a0 100644 --- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json index d3076515c9..836a7a1bac 100644 --- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "kaJFaxUX6gSqC3Y7", "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "kaJFaxUX6gSqC3Y7", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json index 78bd43a0d9..d4ef78cc34 100644 --- a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json +++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Pro 0.6 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json index 3fa885318e..6c008ce9e1 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1 (0.8 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "VMUL5DemqZSKkMEJ", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.7", "initial_layer_print_height": "0.48", diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json index 600550ddc5..d7192ac77c 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json @@ -6,7 +6,6 @@ "from": "system", "setting_id": "qaiff3f8gSQ1GVj1", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -31,7 +30,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.7", "initial_layer_print_height": "0.48", diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json b/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json index 6041d4c030..70a73e2f58 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K1Max (0.8 nozzle).json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dIWKOSX80OJ6ixTT", "instantiation": "true", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -30,7 +29,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.7", "initial_layer_print_height": "0.48", diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json index b3508aab5c..6ce76e1469 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json index 97da7fe92e..afb293a330 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "s3FIq2ua0ODDqxtm", "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "s3FIq2ua0ODDqxtm", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json index 0cd49b9a89..ac12558c55 100644 --- a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Pro 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json index 5f97213187..f10bb8ddfb 100644 --- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json index 8113cadf74..17fdbca6e3 100644 --- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "OUVOMZEwJDilvXiO", "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_creality_common", + "from": "system", + "setting_id": "OUVOMZEwJDilvXiO", + "instantiation": "true", "accel_to_decel_enable": "1", "accel_to_decel_factor": "100%", "acceleration_limit_mess": "[[0.5,1.0,100,6000],[1.0,1.5,80,5500],[1.5,2.0,60,5000]]", @@ -124,8 +124,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "overhang_totally_speed": "25", "precise_outer_wall": "0", "prime_tower_brim_width": "3", "prime_tower_width": "60", @@ -243,4 +241,4 @@ "wiping_volumes_extruders": "70,70,70,70,70,70,70,70,70,70", "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json index 3b12ac6944..db588cb657 100644 --- a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json +++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Pro 0.8 nozzle.json @@ -31,7 +31,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", diff --git a/resources/profiles/Creality/process/fdm_process_common.json b/resources/profiles/Creality/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Creality/process/fdm_process_common.json +++ b/resources/profiles/Creality/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Creality/process/fdm_process_creality_common.json b/resources/profiles/Creality/process/fdm_process_creality_common.json index 7ec48d4800..2fccc865d8 100644 --- a/resources/profiles/Creality/process/fdm_process_creality_common.json +++ b/resources/profiles/Creality/process/fdm_process_creality_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Cubicon.json b/resources/profiles/Cubicon.json index ffb363c807..f70517a0b1 100644 --- a/resources/profiles/Cubicon.json +++ b/resources/profiles/Cubicon.json @@ -1,6 +1,6 @@ { "name": "Cubicon", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "Cubicon configurations", "machine_model_list": [ diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json index 2844a543a4..60ab5eac11 100644 --- a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json @@ -213,7 +213,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json index 85bd7be03f..8020cac27e 100644 --- a/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-Mini 0.4 nozzle.json @@ -213,7 +213,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json index 9c38452bf5..398f4e3457 100644 --- a/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json @@ -213,7 +213,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Cubicon/machine/fdm_machine_common.json b/resources/profiles/Cubicon/machine/fdm_machine_common.json index 1264456731..2654ef5927 100644 --- a/resources/profiles/Cubicon/machine/fdm_machine_common.json +++ b/resources/profiles/Cubicon/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "support_chamber_temp_control": "0", "support_air_filtration": "0", "machine_max_acceleration_e": [ diff --git a/resources/profiles/Cubicon/process/fdm_process_common.json b/resources/profiles/Cubicon/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Cubicon/process/fdm_process_common.json +++ b/resources/profiles/Cubicon/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Cubicon/process/process template @base.json b/resources/profiles/Cubicon/process/process template @base.json index 74ddfa11d6..073bf4ea23 100644 --- a/resources/profiles/Cubicon/process/process template @base.json +++ b/resources/profiles/Cubicon/process/process template @base.json @@ -147,7 +147,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "precise_z_height": "0", diff --git a/resources/profiles/Custom.json b/resources/profiles/Custom.json index a8cef36ca5..aceecc557a 100644 --- a/resources/profiles/Custom.json +++ b/resources/profiles/Custom.json @@ -1,6 +1,6 @@ { "name": "Custom Printer", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "My configurations", "machine_model_list": [ diff --git a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json index bf48e0488b..615d3aafa4 100644 --- a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json index ad26608bff..cef361767f 100644 --- a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json index d710282360..f8a3f9d4ff 100644 --- a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json index 481fd04152..3db93c2e10 100644 --- a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json index 9aec5f168f..8fbc18b513 100644 --- a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json index 685482342e..faba4cf7cb 100644 --- a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json index 0913752501..5f20b83ec5 100644 --- a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json index 6e17b6e4c0..ccfc71ebb7 100644 --- a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json index a70aeffe29..67a46e0129 100644 --- a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json @@ -15,9 +15,6 @@ "filament_cooling_moves": [ "2" ], - "filament_load_time": [ - "10.5" - ], "filament_loading_speed": [ "10" ], @@ -30,9 +27,6 @@ "filament_stamping_loading_speed": [ "29" ], - "filament_unload_time": [ - "8.5" - ], "filament_unloading_speed": [ "100" ], diff --git a/resources/profiles/Custom/machine/fdm_klipper_common.json b/resources/profiles/Custom/machine/fdm_klipper_common.json index a0ee0f1a47..0080d0ebb0 100644 --- a/resources/profiles/Custom/machine/fdm_klipper_common.json +++ b/resources/profiles/Custom/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Slope Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/Custom/machine/fdm_machine_common.json b/resources/profiles/Custom/machine/fdm_machine_common.json index 963f39c9d8..bf8f2249cf 100644 --- a/resources/profiles/Custom/machine/fdm_machine_common.json +++ b/resources/profiles/Custom/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Custom/machine/fdm_repetier_common.json b/resources/profiles/Custom/machine/fdm_repetier_common.json index b36b716e4e..27b4dd7741 100644 --- a/resources/profiles/Custom/machine/fdm_repetier_common.json +++ b/resources/profiles/Custom/machine/fdm_repetier_common.json @@ -119,7 +119,6 @@ "30" ], "z_hop_types": "Slope Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ @@ -140,4 +139,4 @@ "scan_first_layer": "0", "nozzle_type": "undefine", "auxiliary_fan": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/Custom/machine/fdm_rrf_common.json b/resources/profiles/Custom/machine/fdm_rrf_common.json index 2fc9df9a3d..e9a1301622 100644 --- a/resources/profiles/Custom/machine/fdm_rrf_common.json +++ b/resources/profiles/Custom/machine/fdm_rrf_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Slope Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/Custom/process/fdm_process_common.json b/resources/profiles/Custom/process/fdm_process_common.json index b8e882770a..0d558129af 100644 --- a/resources/profiles/Custom/process/fdm_process_common.json +++ b/resources/profiles/Custom/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -83,7 +82,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Custom/process/fdm_process_marlin_common.json b/resources/profiles/Custom/process/fdm_process_marlin_common.json index 6b1b1434a7..5f5c10f173 100644 --- a/resources/profiles/Custom/process/fdm_process_marlin_common.json +++ b/resources/profiles/Custom/process/fdm_process_marlin_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Custom/process/fdm_process_repetier_common.json b/resources/profiles/Custom/process/fdm_process_repetier_common.json index 3a9bc23306..66df7ad018 100644 --- a/resources/profiles/Custom/process/fdm_process_repetier_common.json +++ b/resources/profiles/Custom/process/fdm_process_repetier_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -105,4 +104,4 @@ "compatible_printers": [ "MyRepetier 0.4 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/Custom/process/fdm_process_rrf_common.json b/resources/profiles/Custom/process/fdm_process_rrf_common.json index e22df25aab..469ca6ecfd 100644 --- a/resources/profiles/Custom/process/fdm_process_rrf_common.json +++ b/resources/profiles/Custom/process/fdm_process_rrf_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/DeltaMaker.json b/resources/profiles/DeltaMaker.json index c7209bdf2b..6ef943d248 100755 --- a/resources/profiles/DeltaMaker.json +++ b/resources/profiles/DeltaMaker.json @@ -1,7 +1,7 @@ { "name": "DeltaMaker", "url": "", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "DeltaMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json b/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json index ecfe431ef6..653ec60927 100755 --- a/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json +++ b/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "1", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/DeltaMaker/machine/fdm_machine_common.json b/resources/profiles/DeltaMaker/machine/fdm_machine_common.json index 12c0e7d104..7e49364d76 100755 --- a/resources/profiles/DeltaMaker/machine/fdm_machine_common.json +++ b/resources/profiles/DeltaMaker/machine/fdm_machine_common.json @@ -11,7 +11,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "1", "machine_max_acceleration_e": [ "5000" ], @@ -102,7 +101,6 @@ ], "single_extruder_multi_material": "0", "change_filament_gcode": "", - "z_lift_type": "NormalLift", "default_print_profile": "", "nozzle_type": "undefine", "auxiliary_fan": "0", diff --git a/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json b/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json index a5a64bfede..3587ef7e7d 100755 --- a/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json +++ b/resources/profiles/DeltaMaker/process/0.25mm Draft @DeltaMaker.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "CPkjzrLXDcdnT5u1", "instantiation": "true", - "adaptive_layer_height": "1", "layer_height": "0.25", "bottom_shell_layers": "3", "bridge_speed": "60", diff --git a/resources/profiles/DeltaMaker/process/fdm_process_common.json b/resources/profiles/DeltaMaker/process/fdm_process_common.json index 80c74007f0..09d47aab9d 100755 --- a/resources/profiles/DeltaMaker/process/fdm_process_common.json +++ b/resources/profiles/DeltaMaker/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "20.0", "bottom_surface_pattern": "monotonic", @@ -82,7 +81,6 @@ "support_object_xy_distance": "0.8", "tree_support_branch_angle": "45", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Dremel.json b/resources/profiles/Dremel.json index 71f13d0dc8..3d804f6a1b 100644 --- a/resources/profiles/Dremel.json +++ b/resources/profiles/Dremel.json @@ -1,6 +1,6 @@ { "name": "Dremel", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Dremel configurations", "machine_model_list": [ diff --git a/resources/profiles/Dremel/machine/fdm_dremel_common.json b/resources/profiles/Dremel/machine/fdm_dremel_common.json index 0dae7eb9ea..d032e63646 100644 --- a/resources/profiles/Dremel/machine/fdm_dremel_common.json +++ b/resources/profiles/Dremel/machine/fdm_dremel_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Dremel/machine/fdm_machine_common.json b/resources/profiles/Dremel/machine/fdm_machine_common.json index 1264456731..2654ef5927 100644 --- a/resources/profiles/Dremel/machine/fdm_machine_common.json +++ b/resources/profiles/Dremel/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "support_chamber_temp_control": "0", "support_air_filtration": "0", "machine_max_acceleration_e": [ diff --git a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json index 6b97a85444..377d1a67a7 100644 --- a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json +++ b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D40 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "9KpA5yblUW2rVLZY", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "40", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json index 734b6e5c69..1b4090e8fc 100644 --- a/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json +++ b/resources/profiles/Dremel/process/.05mm Super Detail @Dremel 3D45 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "wSAun08YCT9u9pOY", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "40", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json index 716b2ca2dc..b757aa1bb0 100644 --- a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json +++ b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D20 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "n2k8VXfPE45lzxmq", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "5000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "45", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json index 6089ca8f5b..b2a12da6ab 100644 --- a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json +++ b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D40 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "1dgGvgPtncRPdWVX", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "60", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json index ad07216741..e48ad6212f 100644 --- a/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json +++ b/resources/profiles/Dremel/process/.10mm Detail @Dremel 3D45 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "DXivoqKpf6E0edQV", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "40", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json index 358fef4448..06ffde36b7 100644 --- a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json +++ b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D20 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "1EacU2rT7gdsnkP4", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "0.95", "bridge_speed": "25", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "5000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "60", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "15%", "ironing_spacing": "0.1", diff --git a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json index 4c083240de..ac92266b97 100644 --- a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json +++ b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D40 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "iraCyWuqWZ9D0Zw1", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "60", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json index a974c3097b..7ff03cb876 100644 --- a/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json +++ b/resources/profiles/Dremel/process/.20mm Standard @Dremel 3D45 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "DU8Yd6C1GF2uIuNF", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "50", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json index 5d16155453..601268bac0 100644 --- a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json +++ b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D20 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "iX1Z2gHIGCWuZAJC", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "5000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "60", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json index 27175afdf2..19719d7008 100644 --- a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json +++ b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D40 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "N3x1hdUv74ecskhv", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "60", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json index ca224bf687..24be67d78e 100644 --- a/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json +++ b/resources/profiles/Dremel/process/.30mm Draft @Dremel 3D45 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "O6ulsZPXdb1dpOTB", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.4", "internal_solid_infill_speed": "50", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json index 8db1965a59..eca0dfe6ff 100644 --- a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json +++ b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D40 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "WMm4Yxia1QjZCK3h", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "60", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json index d7a6db964e..3801591ebc 100644 --- a/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json +++ b/resources/profiles/Dremel/process/.34mm SuperDraft @Dremel 3D45 0.4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "verN5otUrqpeDtY4", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50", "brim_width": "5", @@ -30,7 +29,6 @@ "inner_wall_acceleration": "2000", "internal_solid_infill_line_width": "0.56", "internal_solid_infill_speed": "50", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "2000", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Dremel/process/fdm_process_common.json b/resources/profiles/Dremel/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Dremel/process/fdm_process_common.json +++ b/resources/profiles/Dremel/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Dremel/process/fdm_process_dremel_common.json b/resources/profiles/Dremel/process/fdm_process_dremel_common.json index b68c7230b3..92358dc814 100644 --- a/resources/profiles/Dremel/process/fdm_process_dremel_common.json +++ b/resources/profiles/Dremel/process/fdm_process_dremel_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json index 9d2da9692c..b2e2c21f14 100644 --- a/resources/profiles/Elegoo.json +++ b/resources/profiles/Elegoo.json @@ -1,6 +1,6 @@ { "name": "Elegoo", - "version": "02.04.00.08", + "version": "02.04.00.09", "force_update": "0", "description": "Elegoo configurations", "machine_model_list": [ diff --git a/resources/profiles/Elegoo/machine/fdm_elegoo_common.json b/resources/profiles/Elegoo/machine/fdm_elegoo_common.json index fffd18ea44..5bbfacf133 100644 --- a/resources/profiles/Elegoo/machine/fdm_elegoo_common.json +++ b/resources/profiles/Elegoo/machine/fdm_elegoo_common.json @@ -1,9 +1,9 @@ { "type": "machine", "name": "fdm_elegoo_common", + "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", - "inherits": "fdm_machine_common", "gcode_flavor": "marlin", "printer_technology": "FFF", "nozzle_diameter": [ @@ -141,7 +141,6 @@ "thumbnails_format": "PNG", "nozzle_type": "brass", "machine_end_gcode": "G90 ;Absolute positionning\nM83 ; extruder relative mode\nG1 X10 Y{print_bed_max[1]*0.8} Z{min(max_layer_z+100, printable_height)} E-8 F{travel_speed*60} ; Move print head up\nG1 Z{min(max_layer_z+100, printable_height-2)} F600\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM84 ;Disable all steppers", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M600", diff --git a/resources/profiles/Elegoo/machine/fdm_machine_common.json b/resources/profiles/Elegoo/machine/fdm_machine_common.json index 249e760920..283197aa4e 100644 --- a/resources/profiles/Elegoo/machine/fdm_machine_common.json +++ b/resources/profiles/Elegoo/machine/fdm_machine_common.json @@ -20,7 +20,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Elegoo/process/fdm_process_common.json b/resources/profiles/Elegoo/process/fdm_process_common.json index a2bd0ea5f1..01b285b7f0 100644 --- a/resources/profiles/Elegoo/process/fdm_process_common.json +++ b/resources/profiles/Elegoo/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", @@ -28,7 +27,6 @@ "sparse_infill_line_width": "0.45", "infill_wall_overlap": "15%", "sparse_infill_speed": "50", - "overhang_speed_classic": "1", "interface_shells": "0", "detect_overhang_wall": "0", "reduce_infill_retraction": "1", diff --git a/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json b/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json index 2ca6daf45b..1e61b87f49 100644 --- a/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json +++ b/resources/profiles/Elegoo/process/fdm_process_elegoo_common.json @@ -16,7 +16,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_speed": "30", diff --git a/resources/profiles/Eryone.json b/resources/profiles/Eryone.json index 488ba18337..1ee1f88ed8 100644 --- a/resources/profiles/Eryone.json +++ b/resources/profiles/Eryone.json @@ -1,6 +1,6 @@ { "name": "Eryone", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Eryone configurations", "machine_model_list": [ diff --git a/resources/profiles/Eryone/filament/Eryone Standard PLA.json b/resources/profiles/Eryone/filament/Eryone Standard PLA.json index 103bb592d5..5b06b12ef6 100644 --- a/resources/profiles/Eryone/filament/Eryone Standard PLA.json +++ b/resources/profiles/Eryone/filament/Eryone Standard PLA.json @@ -90,9 +90,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -165,9 +162,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20.json index 26d223d2f1..c555d904dc 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20.json @@ -5,6 +5,7 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Eryone ER20", + "default_materials": "Generic PLA @System", "name": "Eryone ER20", "nozzle_diameter": "0.4;0.2;0.5;0.6;0.8", "type": "machine_model" diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json index 2dcf3d7882..11d48a7859 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json @@ -6,6 +6,7 @@ "hotend_model": "", "machine_tech": "FFF", "model_id": "Eryone ER20 Klipper", + "default_materials": "Generic PLA @System", "name": "Eryone ER20 Klipper", "nozzle_diameter": "0.4;0.2;0.5;0.6;0.8", "type": "machine_model", diff --git a/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json index f45febbdbb..20f82b5fa9 100644 --- a/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json +++ b/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json @@ -182,7 +182,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Eryone/machine/Thinker X400.json b/resources/profiles/Eryone/machine/Thinker X400.json index 8293d5693e..66bd0888de 100644 --- a/resources/profiles/Eryone/machine/Thinker X400.json +++ b/resources/profiles/Eryone/machine/Thinker X400.json @@ -8,5 +8,5 @@ "bed_model": "X400_bed.stl", "bed_texture": "Thinker_texture.svg", "hotend_model": "", - "default_materials": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF" + "default_materials": "Eryone PLA;Eryone ABS;Eryone ASA;Eryone PETG;Eryone Silk PLA;Eryone TPU;Eryone ABS-CF;Eryone ASA-CF;Eryone PA;Eryone PA-CF;Eryone PA-GF;Eryone PETG-CF;Eryone PLA-CF;Eryone PP;Eryone PP-CF;Eryone PLA @0.2 nozzle" } diff --git a/resources/profiles/Eryone/machine/fdm_machine_common.json b/resources/profiles/Eryone/machine/fdm_machine_common.json index 517cbdd10d..5d0c5e680c 100644 --- a/resources/profiles/Eryone/machine/fdm_machine_common.json +++ b/resources/profiles/Eryone/machine/fdm_machine_common.json @@ -141,7 +141,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json index e6cb922e70..82df729a08 100644 --- a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json +++ b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_Klipper_common.json @@ -115,7 +115,6 @@ "retraction_speed": [ "25" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json index 6e0d263b6a..3152866ae3 100644 --- a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json +++ b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json @@ -132,7 +132,6 @@ "50" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json b/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json index 588628cfab..311167c579 100644 --- a/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json +++ b/resources/profiles/Eryone/process/0.20mm Standard @Thinker X400.json @@ -113,7 +113,6 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json index bb5638f010..158064d7bb 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.12mm High Quality @Eryone ER20.json @@ -1,12 +1,13 @@ { + "type": "process", + "name": "0.12mm High Quality @Eryone ER20", + "inherits": "fdm_process_ER20_0.12", + "from": "system", + "setting_id": "H7ODK5fAAYDUoeSH", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.4 nozzle" ], - "from": "system", - "inherits": "fdm_process_ER20_0.12", - "setting_id": "H7ODK5fAAYDUoeSH", - "instantiation": "true", - "name": "0.12mm High Quality @Eryone ER20", "sparse_infill_pattern": "gyroid", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", @@ -14,7 +15,5 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "type": "process" + "overhang_reverse_threshold": "50%" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json index c59e1da21f..413d651249 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.16mm Optimal @Eryone ER20.json @@ -1,12 +1,13 @@ { + "type": "process", + "name": "0.16mm Optimal @Eryone ER20", + "inherits": "fdm_process_ER20_0.16", + "from": "system", + "setting_id": "T7CLbKpkDxOdqBWk", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.4 nozzle" ], - "from": "system", - "inherits": "fdm_process_ER20_0.16", - "setting_id": "T7CLbKpkDxOdqBWk", - "instantiation": "true", - "name": "0.16mm Optimal @Eryone ER20", "sparse_infill_pattern": "gyroid", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", @@ -14,7 +15,5 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "type": "process" + "overhang_reverse_threshold": "50%" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json index bd685a42c6..8fb5c24641 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm High Quality @Eryone ER20 Klipper.json @@ -1,12 +1,13 @@ { + "type": "process", + "name": "0.12mm High Quality @Eryone ER20 Klipper", + "inherits": "fdm_process_ER20_Klipper_0.12", + "from": "system", + "setting_id": "FdNIlqPmjcMxniJL", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.4 nozzle" ], - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.12", - "setting_id": "FdNIlqPmjcMxniJL", - "instantiation": "true", - "name": "0.12mm High Quality @Eryone ER20 Klipper", "sparse_infill_pattern": "gyroid", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", @@ -14,7 +15,5 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "type": "process" + "overhang_reverse_threshold": "50%" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json index 0526d10668..8c3faa69d7 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.16mm Optimal @Eryone ER20 Klipper.json @@ -1,12 +1,13 @@ { + "type": "process", + "name": "0.16mm Optimal @Eryone ER20 Klipper", + "inherits": "fdm_process_ER20_Klipper_0.16", + "from": "system", + "setting_id": "T6D9ljLTeYJNh7LY", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.4 nozzle" ], - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.16", - "setting_id": "T6D9ljLTeYJNh7LY", - "instantiation": "true", - "name": "0.16mm Optimal @Eryone ER20 Klipper", "sparse_infill_pattern": "gyroid", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", @@ -14,7 +15,5 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_internal_only": "0", - "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", - "type": "process" + "overhang_reverse_threshold": "50%" } diff --git a/resources/profiles/Eryone/process/fdm_process_common.json b/resources/profiles/Eryone/process/fdm_process_common.json index 3fd9decf3f..d724d1b629 100644 --- a/resources/profiles/Eryone/process/fdm_process_common.json +++ b/resources/profiles/Eryone/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -78,7 +77,6 @@ "support_object_xy_distance": "2.5", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", diff --git a/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json b/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json index c4d744f31e..c628cbd726 100644 --- a/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json +++ b/resources/profiles/Eryone/process/fdm_process_eryone_ER20_common.json @@ -5,7 +5,6 @@ "instantiation": "false", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", - "adaptive_layer_height": "0", "alternate_extra_wall": "0", "bottom_shell_layers": "4", "bottom_shell_thickness": "0", @@ -62,7 +61,6 @@ "inner_wall_line_width": "0.45", "inner_wall_speed": "80", "interface_shells": "0", - "internal_bridge_support_thickness": "0.8", "internal_bridge_angle": "0", "internal_bridge_density": "100%", "internal_bridge_flow": "1", @@ -99,7 +97,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "precise_outer_wall": "1", "precise_z_height": "1", "preheat_time": "30", @@ -131,7 +128,6 @@ "single_extruder_multi_material_priming": "1", "single_loop_draft_shield": "0", "skirt_loops": "0", - "smooth_coefficient": "80", "slow_down_layers": "1", "small_perimeter_speed": "50%", "small_perimeter_threshold": "0", diff --git a/resources/profiles/FLSun.json b/resources/profiles/FLSun.json index 384b31f464..36d0129015 100644 --- a/resources/profiles/FLSun.json +++ b/resources/profiles/FLSun.json @@ -1,6 +1,6 @@ { "name": "FLSun", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "FLSun configurations", "machine_model_list": [ diff --git a/resources/profiles/FLSun/machine/fdm_machine_common.json b/resources/profiles/FLSun/machine/fdm_machine_common.json index df5041bb50..11f5a9e934 100644 --- a/resources/profiles/FLSun/machine/fdm_machine_common.json +++ b/resources/profiles/FLSun/machine/fdm_machine_common.json @@ -126,7 +126,6 @@ "deretraction_speed": [ "30" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json index 6279861202..0b5512970a 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun Q5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "pIcVuwwQ8EWmPKgZ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.08", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json index 391b7743a1..90320d5dc3 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun QQSPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Ypz6DmDfVK0nHsGe", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.08", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json b/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json index 03a66178ad..9b4585d43c 100644 --- a/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json +++ b/resources/profiles/FLSun/process/0.08mm Fine @FLSun SR.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "WMx2mtWIuLTNAPHS", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.08", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json index 5c9f752ee6..a28bf094f4 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun Q5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "TZdqXwp7bC2m9tpO", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json index 2d5e2ab82b..45f0558cae 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun QQSPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "HVdXArEX5vgTZkQK", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json index 6b33217ea2..df47580b4d 100644 --- a/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json +++ b/resources/profiles/FLSun/process/0.16mm Optimal @FLSun SR.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "tqesgSzTbrfXG1mY", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json index d9c7f3799b..f6796345a4 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun Q5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "CUzDbhgZMATkwFSg", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json index a4ec969711..692b394d94 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun QQSPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "FV3PZ6zjZP5chJlp", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json b/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json index 478126620d..41627d8ab0 100644 --- a/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json +++ b/resources/profiles/FLSun/process/0.20mm Standard @FLSun SR.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "EzioqGPSbnBNftNw", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json index 66b5bc2fe6..f6a220ad6c 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun Q5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "PjpsLsUYSt1jfY7G", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json index 92ef6cc2e4..578adb54ee 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun QQSPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "9mHQwwo6UoNaD07z", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json b/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json index 3ab6730d9c..db0a84e5f7 100644 --- a/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json +++ b/resources/profiles/FLSun/process/0.24mm Draft @FLSun SR.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ehSWBo2Q9G7QS3Wt", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.24", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json index 2c2f123e71..c729094bb6 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun Q5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "iEXqwmSaxdLWpN8K", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json index e1e50c074e..356c2830c9 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun QQSPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "fJPwsjRdFJRka84X", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json index 1c1917adc2..387fe3edb3 100644 --- a/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json +++ b/resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun SR.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "kOtY4iPbqQlkQPef", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/FLSun/process/fdm_process_common.json b/resources/profiles/FLSun/process/fdm_process_common.json index 8371968b2e..47666d8d16 100644 --- a/resources/profiles/FLSun/process/fdm_process_common.json +++ b/resources/profiles/FLSun/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -78,7 +77,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", diff --git a/resources/profiles/Flashforge.json b/resources/profiles/Flashforge.json index 1f252e507b..5bccaf9dfb 100644 --- a/resources/profiles/Flashforge.json +++ b/resources/profiles/Flashforge.json @@ -1,7 +1,7 @@ { "name": "Flashforge", "url": "", - "version": "02.04.00.06", + "version": "02.04.00.08", "force_update": "0", "description": "Flashforge configurations", "machine_model_list": [ diff --git a/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json index c1d48bf1ff..6d4221e732 100644 --- a/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/FusRock PET @FF G4P 0.8 HF nozzle.json @@ -15,9 +15,6 @@ "during_print_exhaust_fan_speed": [ "40" ], - "filament_load_time": [ - "29" - ], "filament_max_volumetric_speed": [ "12" ], @@ -33,9 +30,6 @@ "filament_type": [ "PET" ], - "filament_unload_time": [ - "29" - ], "compatible_printers": [ "Flashforge Guider4 Pro 0.8 HF nozzle" ], diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json b/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json index 249060ab5c..f228bdd769 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock NexPA-CF25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock NexPA-CF25", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic NexPA-CF25", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "sVoga8454H2oKuKI", "filament_id": "OFjt8dDO", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PA-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json index d47b7f865c..3666353817 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PAHT-CF", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic PAHT-CF", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "OGhhxVvR4O4VYuCK", "filament_id": "OFKW5hEW", @@ -96,9 +96,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "PAHT-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json index 4dee20a476..5de8912224 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PET-CF", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic PET-CF", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "nGtsrswmS2Fj4Uev", "filament_id": "OFDu1qE7", @@ -96,9 +96,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "PET-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json b/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json index 895d10aa12..e6f32aace1 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock S-Multi", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic S-Multi", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "zAqGdmTsz4Z0qbaa", "filament_id": "OF0AquDh", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json b/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json index 792b12c949..ebe48dc6dd 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock S-PAHT", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic S-PAHT", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "mBQzgKKsV8Qo3gAr", "filament_id": "OFCn83wF", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PAHT" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json index 8422875984..a429c5be48 100644 --- a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json +++ b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Flashforge G3U", - "inherits": "Generic ABS @Flashforge", "renamed_from": "Flashforge Generic ABS @G3U;Flashforge Generic ABS G3U", + "inherits": "Generic ABS @Flashforge", "from": "system", "setting_id": "dxCNYDhcaJqAfDpR", "filament_id": "OFY9muEs", @@ -96,9 +96,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "ABS" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json index 42f9b00a60..07aae7b634 100644 --- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json +++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge AD4.json @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "0" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "40", "close_fan_the_first_x_layers": [ "2" diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json index 20a3e61da2..cfb156dd52 100644 --- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json +++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Flashforge G3U", - "inherits": "Generic ABS @Flashforge", "renamed_from": "Flashforge Generic ASA @G3U;Flashforge Generic ASA G3U", + "inherits": "Generic ABS @Flashforge", "from": "system", "setting_id": "N1vm5hhMHdSNvUwk", "filament_id": "OFLPAxz3", @@ -96,9 +96,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "ASA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json index b80ad322c3..cc73a2a479 100644 --- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Flashforge", - "inherits": "fdm_filament_asa", "renamed_from": "Flashforge Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "tzs0HcyEZow99A2J", "filament_id": "OFLPAxz3", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "0" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "2" diff --git a/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json b/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json index 3012161923..54badf52ae 100644 --- a/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HIPS @Flashforge", - "inherits": "Generic ABS @Flashforge", "renamed_from": "Flashforge Generic HIPS", + "inherits": "Generic ABS @Flashforge", "from": "system", "setting_id": "zMQa7Squ3p3jKYwB", "filament_id": "OFsFon5l", @@ -96,9 +96,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -171,9 +168,6 @@ "filament_type": [ "HIPS" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json index b6b4f26221..7fabff8e93 100644 --- a/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic HS PLA @Flashforge.json @@ -1,15 +1,12 @@ { "type": "filament", "name": "Generic HS PLA @Flashforge", - "inherits": "fdm_filament_pla", "renamed_from": "Flashforge Generic HS PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "GTqLzBcGP2Rmmc9X", "filament_id": "OFvxghTE", "instantiation": "true", - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": [ "0" ], @@ -90,9 +87,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -165,9 +159,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json index 119b9e3349..9c37ea85a7 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json +++ b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Flashforge G3U", - "inherits": "Generic PETG @Flashforge", "renamed_from": "Flashforge Generic PETG @G3U;Flashforge Generic PETG G3U", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "umrO2bL7ihLROx0B", "filament_id": "OFYPdQJh", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PETG" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json index d298fa5b12..2464363ce9 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json +++ b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Flashforge G3U", - "inherits": "Generic PETG @Flashforge", "renamed_from": "Flashforge Generic PETG-CF @G3U;Flashforge Generic PETG-CF G3U", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "XXoNSerT8aqG5dlL", "filament_id": "OFoYSJKi", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PETG-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json index bcf3f0926c..b310bf8d5b 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json +++ b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge AD4.json @@ -9,9 +9,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "1" diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json index ca45c4fe25..8908c41081 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic PETG-CF10 @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF10 @Flashforge", - "inherits": "fdm_filament_pet", "renamed_from": "Flashforge Generic PETG-CF10", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "0oCfWHsyqpBCbD62", "filament_id": "OFO5djrM", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "1" diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json index b0c0ce9597..20f0ba7403 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.6 Nozzle.json @@ -3,7 +3,8 @@ "name": "Generic PLA @Flashforge G3U 0.6 Nozzle", "inherits": "Generic PLA @Flashforge", "from": "system", - "instantiation": "false", + "setting_id": "YSbpdZWmgTvjJmZZ", + "instantiation": "true", "compatible_printers": [ "Flashforge Guider 3 Ultra 0.6 Nozzle" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json index 49aa73c7eb..6a9af67be1 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U 0.8 Nozzle.json @@ -3,7 +3,8 @@ "name": "Generic PLA @Flashforge G3U 0.8 Nozzle", "inherits": "Generic PLA @Flashforge", "from": "system", - "instantiation": "false", + "setting_id": "CsPPXQWXhwz5fUww", + "instantiation": "true", "compatible_printers": [ "Flashforge Guider 3 Ultra 0.8 Nozzle" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json index 48b66814ca..630c4c723b 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json +++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge G3U.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Flashforge G3U", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Flashforge Generic PLA @G3U;Flashforge Generic PLA G3U", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "8ZlELnZzCa3UsztB", "filament_id": "OFDSrzZ8", @@ -24,8 +24,6 @@ ], "compatible_printers": [ "Flashforge Guider 3 Ultra 0.4 Nozzle", - "Flashforge Guider 3 Ultra 0.6 Nozzle", - "Flashforge Guider 3 Ultra 0.8 Nozzle", "Flashforge Guider 2s 0.4 nozzle" ], "compatible_printers_condition": "", @@ -97,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -172,9 +167,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json index 85741e007d..eb4e1ec0ec 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json +++ b/resources/profiles/Flashforge/filament/Generic PLA High Speed @Flashforge AD4.json @@ -6,9 +6,6 @@ "setting_id": "B4EWBUa9G36lZUd7", "filament_id": "OFmpMwxS", "instantiation": "true", - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": [ "0" ], @@ -84,9 +81,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -159,9 +153,6 @@ "filament_type": [ "PLA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json index 7f79c0753e..595ca9e63d 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json +++ b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Flashforge G3U", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Flashforge Generic PLA-CF @G3U;Flashforge Generic PLA-CF G3U", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "J2zu45Q3zu7Tor3W", "filament_id": "OFWbdGsC", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PLA-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json index c03c616a0e..d1c860e830 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json +++ b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge AD4.json @@ -9,9 +9,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": [ "0" ], @@ -86,9 +83,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -161,9 +155,6 @@ "filament_type": [ "PLA-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json index 8b2e1efb14..06307637e7 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic PLA-CF10 @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF10 @Flashforge", - "inherits": "fdm_filament_pla", "renamed_from": "Flashforge Generic PLA-CF10", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "cckB4CXjFwZKC0l0", "filament_id": "OFX2zcrM", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": [ "0" ], @@ -90,9 +87,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -165,9 +159,6 @@ "filament_type": [ "PLA-CF" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json index 6c76493158..92c2a5e54a 100644 --- a/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic PVA @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Flashforge", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Flashforge Generic PVA", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "yiCXuEb87vNMhytL", "filament_id": "OFDvXujf", @@ -97,9 +97,6 @@ "filament_is_support": [ "1" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -172,9 +169,6 @@ "filament_type": [ "PVA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "35" ], diff --git a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json index 610777d347..4fb3c96b08 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json +++ b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge AD4.json @@ -9,9 +9,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "1" diff --git a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json index 45a6b2e6f9..5ebb19eb68 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic TPU @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Flashforge", - "inherits": "fdm_filament_tpu", "renamed_from": "Flashforge Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "luh9xN4STlD0sTyt", "filament_id": "OFgbpcy9", @@ -10,9 +10,6 @@ "additional_cooling_fan_speed": [ "100" ], - "bed_temperature_difference": [ - "10" - ], "chamber_temperature": "0", "close_fan_the_first_x_layers": [ "1" diff --git a/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json b/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json index 533af6688b..77a59b4bbf 100644 --- a/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json +++ b/resources/profiles/Flashforge/filament/Polymaker/Polymaker CoPA.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Polymaker CoPA", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Polymaker Generic CoPA", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "5Dt1APJ8qd5pzmzK", "filament_id": "OFQyyO0l", @@ -95,9 +95,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "30" ], diff --git a/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json b/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json index c7eb2fb58c..91e636a3d4 100644 --- a/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json +++ b/resources/profiles/Flashforge/filament/Polymaker/Polymaker S1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Polymaker S1", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Polymaker Generic S1", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "auChFegT1xViXxGe", "filament_id": "OFaDsTE0", @@ -95,9 +95,6 @@ "filament_is_support": [ "1" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -170,9 +167,6 @@ "filament_type": [ "PA" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "30" ], diff --git a/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json index 50a7d88ff5..6d03066d38 100644 --- a/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json @@ -199,7 +199,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json index 9dcd0f86dd..682594f99a 100644 --- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json @@ -199,7 +199,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json index a88cbb9e80..ff7251562e 100644 --- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json @@ -199,7 +199,6 @@ "35" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json index 47ac21c2ec..806e5cda1f 100644 --- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json @@ -199,7 +199,6 @@ "35" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X.json b/resources/profiles/Flashforge/machine/Flashforge AD5X.json index 42cfac7967..cd36362249 100644 --- a/resources/profiles/Flashforge/machine/Flashforge AD5X.json +++ b/resources/profiles/Flashforge/machine/Flashforge AD5X.json @@ -9,5 +9,5 @@ "bed_texture": "flashforge_ad5x_buildplate_texture.svg", "hotend_model": "flashforge_adventurer_5m_series_hotend.STL", "url": "", - "default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge" + "default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge;Generic PLA @FF AD5M 0.25 Nozzle" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json index 8c5f7ec4bf..d9864c599d 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json +++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series.json @@ -2,6 +2,7 @@ "type": "machine_model", "name": "Flashforge Adventurer 4 Series", "model_id": "Flashforge Adventurer 4 Series", + "default_materials": "Generic PLA @Flashforge AD4;Generic PLA High Speed @Flashforge AD4", "nozzle_diameter": "0.3;0.4;0.6;0.4HS", "machine_tech": "FFF", "family": "Flashforge", diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json index 476d036a95..45023ac132 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json +++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M Pro.json @@ -9,5 +9,5 @@ "bed_texture": "flashforge_adventurer5m_buildplate_texture.svg", "default_bed_type": "Textured PEI Plate", "hotend_model": "flashforge_adventurer_5m_series_hotend.STL", - "default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge" + "default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge;Generic PLA @FF AD5M 0.25 Nozzle" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json index b69dc12126..9d4de80c6e 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json +++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 5M.json @@ -9,5 +9,5 @@ "bed_texture": "flashforge_adventurer5m_buildplate_texture.svg", "default_bed_type": "Textured PEI Plate", "hotend_model": "flashforge_adventurer_5m_series_hotend.STL", - "default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge" + "default_materials": "Generic ABS @Flashforge;Generic PETG @Flashforge;Generic PLA @Flashforge;Generic PLA @FF AD5M 0.25 Nozzle" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Artemis.json b/resources/profiles/Flashforge/machine/Flashforge Artemis.json index 22e9963a24..069a71de70 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Artemis.json +++ b/resources/profiles/Flashforge/machine/Flashforge Artemis.json @@ -2,6 +2,7 @@ "type": "machine_model", "name": "Flashforge Artemis", "model_id": "Flashforge-Artemis", + "default_materials": "Generic PETG @Flashforge Artemis", "nozzle_diameter": "0.4", "machine_tech": "FFF", "family": "Flashforge", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json index 54be573cf7..c3cb7aa570 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json @@ -24,7 +24,7 @@ "cooling_tube_retraction": "0", "default_bed_type": "", "default_filament_profile": [ - "Flashforge Generic PLA" + "Generic PLA @Flashforge" ], "default_print_profile": "0.12mm Standard @FF C5 0.25 nozzle", "deretraction_speed": [ @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json index 5ffbd6a7fc..474e697fa1 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json index ce7727209f..a10c65d83e 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json index e747961d1e..0e3a29a2ad 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json index 3eea1c58cf..911c09f29c 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json @@ -24,7 +24,7 @@ "cooling_tube_retraction": "0", "default_bed_type": "", "default_filament_profile": [ - "Flashforge Generic PLA" + "Generic PLA @Flashforge" ], "default_print_profile": "0.12mm Standard @FF C5 0.25 nozzle", "deretraction_speed": [ @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json index 620fb3dec3..ec69837a3a 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json index 43c07989c6..d3d189d4e9 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json index 71d101c355..e596675ad0 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json @@ -264,7 +264,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "0", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json index 4ef02628d1..c33735a4bb 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json @@ -8,5 +8,5 @@ "bed_model": "flashforge_c5_buildplate_model.stl", "bed_texture": "flashforge_c5_buildplate_texture.png", "hotend_model": "", - "default_materials": "" + "default_materials": "Generic PLA @System;Generic PLA @FF C5P" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5.json index 7ef9c172c0..358cd4aaee 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5.json @@ -8,5 +8,5 @@ "bed_model": "flashforge_c5_buildplate_model.stl", "bed_texture": "flashforge_c5_buildplate_texture.png", "hotend_model": "", - "default_materials": "" + "default_materials": "Generic PLA @System;Generic PLA @FF C5" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json index dcde8504e9..aeb84117fd 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json @@ -186,7 +186,6 @@ "35" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json index a830f2db98..3b3aa553e7 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra.json @@ -8,5 +8,5 @@ "bed_model": "flashforge_g3u_buildplate_model.stl", "bed_texture": "flashforge_g3u_buildplate_texture.svg", "hotend_model": "", - "default_materials": "FusRock NexPA-CF25;FusRock PAHT-CF;FusRock PAHT-CF @G3U 0.6 Nozzle;FusRock PET-CF;FusRock PET-CF @G3U 0.6 Nozzle;FusRock S-Multi;FusRock S-PAHT;Generic ABS @Flashforge G3U;Generic ABS @Flashforge G3U 0.6 Nozzle;Generic ASA @Flashforge G3U;Generic ASA @Flashforge G3U 0.6 Nozzle;Generic HIPS @Flashforge;Generic HIPS @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U;Generic PETG @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U 0.8 Nozzle;Generic PETG-CF @Flashforge G3U;Generic PETG-CF @Flashforge G3U 0.6 Nozzle;Generic PETG-CF @Flashforge G3U 0.8 Nozzle;Generic PLA @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA-CF @Flashforge G3U 0.6 Nozzle;Generic PLA-CF @Flashforge G3U 0.8 Nozzle;Generic PVA @Flashforge;Polymaker CoPA;Polymaker S1" + "default_materials": "FusRock NexPA-CF25;FusRock PAHT-CF;FusRock PAHT-CF @G3U 0.6 Nozzle;FusRock PET-CF;FusRock PET-CF @G3U 0.6 Nozzle;FusRock S-Multi;FusRock S-PAHT;Generic ABS @Flashforge G3U;Generic ABS @Flashforge G3U 0.6 Nozzle;Generic ASA @Flashforge G3U;Generic ASA @Flashforge G3U 0.6 Nozzle;Generic HIPS @Flashforge;Generic HIPS @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U;Generic PETG @Flashforge G3U 0.6 Nozzle;Generic PETG @Flashforge G3U 0.8 Nozzle;Generic PETG-CF @Flashforge G3U;Generic PETG-CF @Flashforge G3U 0.6 Nozzle;Generic PETG-CF @Flashforge G3U 0.8 Nozzle;Generic PLA @Flashforge G3U;Generic PLA @Flashforge G3U 0.6 Nozzle;Generic PLA @Flashforge G3U 0.8 Nozzle;Generic PLA-CF @Flashforge G3U;Generic PLA-CF @Flashforge G3U 0.6 Nozzle;Generic PLA-CF @Flashforge G3U 0.8 Nozzle;Generic PVA @Flashforge;Polymaker CoPA;Polymaker S1" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json index b7a7d5f6ba..85efedf8f9 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge" + "Flashforge PLA Basic @FF G4 0.25 nozzle" ], "default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", "deretraction_speed": [ @@ -199,7 +199,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json index f13d0aa125..b8e60f92d3 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U" + "Flashforge PLA Basic @FF G4 HF" ], "default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json index 22148f62db..f60d1df816 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge" + "Flashforge PLA Basic @FF G4" ], "default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", "deretraction_speed": [ @@ -199,7 +199,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json index 4eb27093aa..38d0321592 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U 0.6 Nozzle" + "Flashforge PLA Basic @FF G4 0.6 HF nozzle" ], "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json index 56a63623fd..ceece27959 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U 0.6 Nozzle" + "Flashforge PLA Basic @FF G4 0.6 nozzle" ], "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json index 64853e95fa..35c85dc400 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U 0.6 Nozzle" + "Flashforge PLA Basic @FF G4 0.8 HF nozzle" ], "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json index 4fbf0d684e..fdddbe17ed 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge" + "Flashforge PLA Basic @FF G4P 0.25 nozzle" ], "default_print_profile": "0.12mm Standard @Flashforge AD5M Pro 0.25 Nozzle", "deretraction_speed": [ @@ -199,7 +199,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json index 9c0b57c05c..7b3566197e 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U" + "Flashforge PLA Basic @FF G4P HF" ], "default_print_profile": "0.20mm Standard @Flashforge G3U 0.4 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json index 58daabb444..3ea39fdb11 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge" + "Flashforge PLA Basic @FF G4P" ], "default_print_profile": "0.20mm Standard @Flashforge AD5M Pro 0.4 Nozzle", "deretraction_speed": [ @@ -199,7 +199,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json index 49756682ba..0a7d2dd29b 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U 0.6 Nozzle" + "Flashforge PLA Basic @FF G4P 0.6 HF nozzle" ], "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json index 8c1a60781b..6b9031f8fe 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U 0.6 Nozzle" + "Flashforge PLA Basic @FF G4P 0.6 nozzle" ], "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json index 1140b773e3..37efacacde 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json @@ -23,7 +23,7 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Generic PLA @Flashforge G3U 0.6 Nozzle" + "Flashforge PLA Basic @FF G4P 0.8 HF nozzle" ], "default_print_profile": "0.30mm Standard @Flashforge G3U 0.6 Nozzle", "deretraction_speed": [ @@ -200,7 +200,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json index 4bcdc78d4a..cac18081f6 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro.json @@ -8,5 +8,5 @@ "bed_model": "flashforge_g4pro_buildplate_model.stl", "bed_texture": "flashforge_g4pro_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1" + "default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1;Flashforge PLA Basic @FF G4P 0.25 nozzle;Flashforge PLA Basic @FF G4P HF;Flashforge PLA Basic @FF G4P;Flashforge PLA Basic @FF G4P 0.6 HF nozzle;Flashforge PLA Basic @FF G4P 0.6 nozzle;Flashforge PLA Basic @FF G4P 0.8 HF nozzle" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4.json b/resources/profiles/Flashforge/machine/Flashforge Guider4.json index 0cd89727d1..6633eb093f 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Guider4.json +++ b/resources/profiles/Flashforge/machine/Flashforge Guider4.json @@ -8,5 +8,5 @@ "bed_model": "flashforge_g4pro_buildplate_model.stl", "bed_texture": "flashforge_g4pro_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1" + "default_materials": "Generic PVA @Flashforge;Generic HIPS @Flashforge;Generic PETG-CF @Flashforge G3U;Generic PETG @Flashforge G3U;Generic PLA-CF @Flashforge G3U;Generic PLA @Flashforge G3U;Generic ASA @Flashforge G3U;Generic ABS @Flashforge G3U;FusRock PET-CF;FusRock PAHT-CF;FusRock NexPA-CF25;FusRock S-Multi;FusRock S-PAHT;Polymaker CoPA;Polymaker S1;Flashforge PLA Basic @FF G4 0.25 nozzle;Flashforge PLA Basic @FF G4 HF;Flashforge PLA Basic @FF G4;Flashforge PLA Basic @FF G4 0.6 HF nozzle;Flashforge PLA Basic @FF G4 0.6 nozzle;Flashforge PLA Basic @FF G4 0.8 HF nozzle" } diff --git a/resources/profiles/Flashforge/machine/fdm_flashforge_common.json b/resources/profiles/Flashforge/machine/fdm_flashforge_common.json index 7e2e700885..1c71c396eb 100644 --- a/resources/profiles/Flashforge/machine/fdm_flashforge_common.json +++ b/resources/profiles/Flashforge/machine/fdm_flashforge_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Flashforge/machine/fdm_klipper_common.json b/resources/profiles/Flashforge/machine/fdm_klipper_common.json index 3126f70c76..d11eb22558 100644 --- a/resources/profiles/Flashforge/machine/fdm_klipper_common.json +++ b/resources/profiles/Flashforge/machine/fdm_klipper_common.json @@ -116,8 +116,6 @@ "deretraction_speed": [ "80" ], - "z_lift_type": "NormalLift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Flashforge/machine/fdm_machine_common.json b/resources/profiles/Flashforge/machine/fdm_machine_common.json index d4bef57491..6361133d45 100644 --- a/resources/profiles/Flashforge/machine/fdm_machine_common.json +++ b/resources/profiles/Flashforge/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "0.20mm Standard @Flashforge AD5M", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json index 1b85975878..38862d967c 100644 --- a/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json +++ b/resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "1VeWY2d3H1hYEkzL", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "80%", "brim_width": "5", @@ -33,7 +32,6 @@ "inner_wall_speed": "200", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "200", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "200", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json index 577586baaf..1dde9465a0 100644 --- a/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json +++ b/resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "VPKIYFY99e6eS9Nd", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "25", "internal_bridge_speed": "150%", @@ -34,7 +33,6 @@ "inner_wall_speed": "60", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "200", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "200", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json b/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json index ad89354ae1..176e4c0031 100644 --- a/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json +++ b/resources/profiles/Flashforge/process/0.20mm High-Speed @Flashforge AD4 HS Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "60", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json index 619014c8a4..54cb9bd666 100644 --- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD3 0.4 Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "48", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json index 2e81b9758f..a2867c886b 100644 --- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json index 1b9fd03771..cb003b72c7 100644 --- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "80%", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json index aeb81d2dd9..fd4dda1aea 100644 --- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge G3U 0.4 Nozzle.json @@ -116,7 +116,6 @@ "overhang_4_4_speed": "10", "overhang_reverse": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "5", diff --git a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json index 97d51bec7f..c3d5382f70 100644 --- a/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json +++ b/resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "uknnclg0sGPLeGcN", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50%", "internal_bridge_speed": "70%", @@ -34,7 +33,6 @@ "inner_wall_speed": "200", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "200", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "200", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json index a2b3f3db1d..12f44410c9 100644 --- a/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/process/0.25mm Standard @FF G4P 0.6 nozzle.json @@ -40,7 +40,6 @@ "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", "overhang_4_4_speed": "12", - "overhang_speed_classic": "1", "prime_tower_width": "45", "prime_volume": "45", "print_settings_id": "0.25mm Standard @FF G4P 0.6 nozzle", diff --git a/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json b/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json index 3eda3c3d34..b7cbce9215 100644 --- a/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json +++ b/resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "twWwqkfSRYeAkuzT", "instantiation": "true", - "adaptive_layer_height": "0", "bridge_flow": "1", "bridge_speed": "50%", "internal_bridge_speed": "70%", @@ -34,7 +33,6 @@ "inner_wall_speed": "200", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "200", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "200", "ironing_flow": "10%", "ironing_spacing": "0.15", diff --git a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json index e17b0e8d9f..6520c4fb48 100644 --- a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD3 0.4 Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "64", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json index ea65c7de1b..52155fcc22 100644 --- a/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.30mm Fast @Flashforge AD4 0.4 Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json index 238d3e3330..03dc328fd6 100644 --- a/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/process/0.30mm Standard @FF G4P 0.6 nozzle.json @@ -35,7 +35,6 @@ "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", "overhang_4_4_speed": "12", - "overhang_speed_classic": "1", "prime_tower_width": "45", "prime_volume": "45", "print_settings_id": "0.30mm Standard @FF G4P 0.6 nozzle", diff --git a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json index 65f1ad351a..5485ef51e7 100644 --- a/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/process/0.30mm Standard @Flashforge AD3 0.6 Nozzle.json @@ -45,7 +45,6 @@ "min_bead_width": "100", "elefant_foot_compensation": "0.15", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "accel_to_decel_enable": "0", "filter_out_gap_fill": "0.5", diff --git a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json index 7c7e132ac3..8f7bd267cb 100644 --- a/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/process/0.36mm Standard @FF G4P 0.6 nozzle.json @@ -36,7 +36,6 @@ "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", "overhang_4_4_speed": "12", - "overhang_speed_classic": "1", "prime_tower_width": "45", "prime_volume": "45", "print_settings_id": "0.36mm Standard @FF G4P 0.6 nozzle", diff --git a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json index 66a91699de..054f652ea8 100644 --- a/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/process/0.42mm Standard @FF G4P 0.6 nozzle.json @@ -36,7 +36,6 @@ "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", "overhang_4_4_speed": "12", - "overhang_speed_classic": "1", "prime_tower_width": "45", "prime_volume": "45", "print_settings_id": "0.42mm Standard @FF G4P 0.6 nozzle", diff --git a/resources/profiles/Flashforge/process/fdm_process_common.json b/resources/profiles/Flashforge/process/fdm_process_common.json index 362b69213e..fc96799afe 100644 --- a/resources/profiles/Flashforge/process/fdm_process_common.json +++ b/resources/profiles/Flashforge/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json index 8d5afce023..1288ef847e 100644 --- a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json +++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.20.json @@ -11,7 +11,6 @@ "gap_infill_speed": "200", "sparse_infill_speed": "270", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "internal_solid_infill_acceleration": "7000", "accel_to_decel_enable": "0", diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json index c55ea16d6b..9ef898d154 100644 --- a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json +++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.30.json @@ -19,7 +19,6 @@ "top_surface_speed": "120", "gap_infill_speed": "150", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "internal_solid_infill_acceleration": "7000", "accel_to_decel_enable": "0", diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json index 570bc9b175..12571d7331 100644 --- a/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json +++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_0.40.json @@ -19,7 +19,6 @@ "top_surface_speed": "120", "gap_infill_speed": "150", "small_perimeter_speed": "50%", - "overhang_speed_classic": "0", "internal_bridge_speed": "50", "internal_solid_infill_acceleration": "7000", "accel_to_decel_enable": "0", diff --git a/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json b/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json index 09beed2646..9149caaef1 100644 --- a/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json +++ b/resources/profiles/Flashforge/process/fdm_process_flashforge_common.json @@ -17,7 +17,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "travel_acceleration": "10000", "inner_wall_acceleration": "5000", diff --git a/resources/profiles/FlyingBear.json b/resources/profiles/FlyingBear.json index 5be5a8d4a3..8c09e115e2 100644 --- a/resources/profiles/FlyingBear.json +++ b/resources/profiles/FlyingBear.json @@ -1,6 +1,6 @@ { "name": "FlyingBear", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "1", "description": "FlyingBear configurations", "machine_model_list": [ diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json index 4da21780a1..fd14f77ebf 100644 --- a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json +++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json @@ -180,7 +180,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json index 795743dc1f..67d3d6181a 100644 --- a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json +++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7.json @@ -8,5 +8,5 @@ "bed_model": "FlyingBear Ghost7-bed.stl", "bed_texture": "FlyingBear Ghost7-texture.png", "hotend_model": "", - "default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear" + "default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear;FlyingBear PLA Basic @Ghost7" } diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json index 4e176dca31..442050312c 100644 --- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json +++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json @@ -177,7 +177,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json index 53ca3accb9..0e0627029b 100644 --- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json +++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1.json @@ -8,5 +8,5 @@ "bed_model": "FlyingBear S1-bed.stl", "bed_texture": "FlyingBear S1-texture.png", "hotend_model": "", - "default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear" + "default_materials": "Generic ABS @FlyingBear;Generic PA-CF @FlyingBear;Generic PC @FlyingBear;Generic PETG @FlyingBear;Generic PLA @FlyingBear;Generic TPU @FlyingBear;FlyingBear PLA @S1" } diff --git a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json index d9170b7fec..f70809115f 100644 --- a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json +++ b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json @@ -176,7 +176,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/FlyingBear/machine/fdm_machine_common.json b/resources/profiles/FlyingBear/machine/fdm_machine_common.json index 9b3574e7de..c6309bb273 100644 --- a/resources/profiles/FlyingBear/machine/fdm_machine_common.json +++ b/resources/profiles/FlyingBear/machine/fdm_machine_common.json @@ -172,7 +172,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/FlyingBear/machine/fdm_marlin_common.json b/resources/profiles/FlyingBear/machine/fdm_marlin_common.json index 41ac0f91ca..d3c1abf330 100644 --- a/resources/profiles/FlyingBear/machine/fdm_marlin_common.json +++ b/resources/profiles/FlyingBear/machine/fdm_marlin_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json index b8200ed6aa..4f4f7c8ae5 100644 --- a/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json +++ b/resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Reborn3.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json index 36f8e3705c..70b79e5397 100644 --- a/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json +++ b/resources/profiles/FlyingBear/process/Ghost7/0.16mm Optimal @FlyingBear Ghost7.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json b/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json index 9b34de8437..5c020a7a1e 100644 --- a/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json +++ b/resources/profiles/FlyingBear/process/Ghost7/fdm_process_common_Ghost7.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "150", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json index 27c9643f05..965f71c7f4 100644 --- a/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json +++ b/resources/profiles/FlyingBear/process/S1/0.16mm Optimal @FlyingBear S1.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json index d922fcf3dc..3b7cdda9e9 100644 --- a/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json +++ b/resources/profiles/FlyingBear/process/S1/fdm_process_common_S1.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "200", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/FlyingBear/process/fdm_process_common.json b/resources/profiles/FlyingBear/process/fdm_process_common.json index 7e7bc9ddb1..bfd2a604e6 100644 --- a/resources/profiles/FlyingBear/process/fdm_process_common.json +++ b/resources/profiles/FlyingBear/process/fdm_process_common.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "200", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json b/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json index 6dd6b765be..72d4365446 100644 --- a/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json +++ b/resources/profiles/FlyingBear/process/fdm_process_marlin_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -83,7 +82,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "45", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Folgertech.json b/resources/profiles/Folgertech.json index a20dc8992e..24f68067e7 100644 --- a/resources/profiles/Folgertech.json +++ b/resources/profiles/Folgertech.json @@ -1,6 +1,6 @@ { "name": "Folgertech", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Folgertech configurations", "machine_model_list": [ diff --git a/resources/profiles/Folgertech/machine/fdm_folgertech_common.json b/resources/profiles/Folgertech/machine/fdm_folgertech_common.json index 035e434afe..c534b9cacb 100644 --- a/resources/profiles/Folgertech/machine/fdm_folgertech_common.json +++ b/resources/profiles/Folgertech/machine/fdm_folgertech_common.json @@ -115,7 +115,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Folgertech/machine/fdm_machine_common.json b/resources/profiles/Folgertech/machine/fdm_machine_common.json index 04ab524f9c..f7f0f31d7e 100644 --- a/resources/profiles/Folgertech/machine/fdm_machine_common.json +++ b/resources/profiles/Folgertech/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", diff --git a/resources/profiles/Folgertech/process/fdm_process_common.json b/resources/profiles/Folgertech/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Folgertech/process/fdm_process_common.json +++ b/resources/profiles/Folgertech/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json b/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json index d04362b5af..caecb87a65 100644 --- a/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json +++ b/resources/profiles/Folgertech/process/fdm_process_folgertech_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Geeetech.json b/resources/profiles/Geeetech.json index cdd862e161..26651c6109 100644 --- a/resources/profiles/Geeetech.json +++ b/resources/profiles/Geeetech.json @@ -1,6 +1,6 @@ { "name": "Geeetech", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Geeetech configurations", "machine_model_list": [ diff --git a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json index 341fe0a126..8113b62d4c 100644 --- a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json +++ b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json @@ -117,7 +117,6 @@ "deretraction_speed": [ "20" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Geeetech/machine/fdm_machine_common.json b/resources/profiles/Geeetech/machine/fdm_machine_common.json index 97e8b60691..e08af83a05 100644 --- a/resources/profiles/Geeetech/machine/fdm_machine_common.json +++ b/resources/profiles/Geeetech/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -111,7 +110,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "before_layer_change_gcode": "G92 E0", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", diff --git a/resources/profiles/Geeetech/process/fdm_process_common.json b/resources/profiles/Geeetech/process/fdm_process_common.json index ef52351d98..b7313353c8 100644 --- a/resources/profiles/Geeetech/process/fdm_process_common.json +++ b/resources/profiles/Geeetech/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Ginger Additive.json b/resources/profiles/Ginger Additive.json index 249c3e9906..d9a38ccfba 100644 --- a/resources/profiles/Ginger Additive.json +++ b/resources/profiles/Ginger Additive.json @@ -1,6 +1,6 @@ { "name": "Ginger Additive", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "1", "description": "Ginger configuration", "machine_model_list": [ diff --git a/resources/profiles/Ginger Additive/filament/fdm_filament_common.json b/resources/profiles/Ginger Additive/filament/fdm_filament_common.json index 71e447d01e..d6603a932e 100644 --- a/resources/profiles/Ginger Additive/filament/fdm_filament_common.json +++ b/resources/profiles/Ginger Additive/filament/fdm_filament_common.json @@ -93,9 +93,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -165,9 +162,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/Ginger Additive/machine/fdm_machine_common.json b/resources/profiles/Ginger Additive/machine/fdm_machine_common.json index 751c0e71f4..60cbb522c5 100644 --- a/resources/profiles/Ginger Additive/machine/fdm_machine_common.json +++ b/resources/profiles/Ginger Additive/machine/fdm_machine_common.json @@ -191,7 +191,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/Ginger Additive/process/fdm_process_common.json b/resources/profiles/Ginger Additive/process/fdm_process_common.json index cd590b710e..3a582c6bc3 100644 --- a/resources/profiles/Ginger Additive/process/fdm_process_common.json +++ b/resources/profiles/Ginger Additive/process/fdm_process_common.json @@ -122,7 +122,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/InfiMech.json b/resources/profiles/InfiMech.json index cdfb2ad80b..78c54e0b4d 100644 --- a/resources/profiles/InfiMech.json +++ b/resources/profiles/InfiMech.json @@ -1,6 +1,6 @@ { "name": "InfiMech", - "version": "02.04.00.04", + "version": "02.04.00.06", "force_update": "1", "description": "InfiMech configurations", "machine_model_list": [ diff --git a/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json b/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json index 149177562f..a77186c2fd 100644 --- a/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json +++ b/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json @@ -180,7 +180,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json b/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json index 2bf51ab627..a018e3f8a3 100644 --- a/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json +++ b/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json @@ -180,7 +180,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json b/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json index 8b8fd4e586..87fd816638 100644 --- a/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json +++ b/resources/profiles/InfiMech/machine/HSN/InfiMech TX Hardened Steel Nozzle.json @@ -8,5 +8,5 @@ "bed_model": "InfiMech TX-bed.stl", "bed_texture": "InfiMech TX-texture.svg", "hotend_model": "", - "default_materials": "Generic ABS @InfiMech;Generic PA-CF @InfiMech;Generic PC @InfiMech;Generic PETG @InfiMech;Generic PLA @InfiMech;Generic TPU @InfiMech" + "default_materials": "Generic ABS @InfiMech;Generic PA-CF @InfiMech;Generic PC @InfiMech;Generic PETG @InfiMech;Generic PLA @InfiMech;Generic TPU @InfiMech;InfiMech PLA @HSN" } diff --git a/resources/profiles/InfiMech/machine/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/fdm_klipper_common.json index a95fea09c0..457c3b1d9d 100644 --- a/resources/profiles/InfiMech/machine/fdm_klipper_common.json +++ b/resources/profiles/InfiMech/machine/fdm_klipper_common.json @@ -177,7 +177,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/InfiMech/machine/fdm_machine_common.json b/resources/profiles/InfiMech/machine/fdm_machine_common.json index 35501555bb..c6847d7db3 100644 --- a/resources/profiles/InfiMech/machine/fdm_machine_common.json +++ b/resources/profiles/InfiMech/machine/fdm_machine_common.json @@ -173,7 +173,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "template_custom_gcode": "", "thumbnails": [ diff --git a/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json b/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json index c3fb83348f..1886e33d56 100644 --- a/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json +++ b/resources/profiles/InfiMech/process/0.16mm Optimal @InfiMech TX.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json b/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json index 783db122a4..9ca14195f7 100644 --- a/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json +++ b/resources/profiles/InfiMech/process/EX+APS/0.16mm Optimal @InfiMech EX+APS.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json b/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json index 6a755b74f1..1529d65ac8 100644 --- a/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json +++ b/resources/profiles/InfiMech/process/EX+APS/fdm_process_common_EX+APS.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "150", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json b/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json index d95e84cedc..99dfa56787 100644 --- a/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json +++ b/resources/profiles/InfiMech/process/EX/0.16mm Optimal @InfiMech EX.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json b/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json index e5846e2cc4..888a67861a 100644 --- a/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json +++ b/resources/profiles/InfiMech/process/EX/fdm_process_common_EX.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "150", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json b/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json index 546464ce49..57f844d7f5 100644 --- a/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json +++ b/resources/profiles/InfiMech/process/HSN/0.16mm Optimal @InfiMech TX HSN.json @@ -24,7 +24,6 @@ "layer_height": "0.16", "line_width": "0.42", "outer_wall_line_width": "0.42", - "overhang_speed_classic": "0", "precise_outer_wall": "0", "print_flow_ratio": "0.95", "seam_gap": "10%", diff --git a/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json b/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json index dc9e9ace24..8b53078f6d 100644 --- a/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json +++ b/resources/profiles/InfiMech/process/HSN/fdm_process_common_HSN.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "200", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/InfiMech/process/fdm_process_common.json b/resources/profiles/InfiMech/process/fdm_process_common.json index 7e7bc9ddb1..bfd2a604e6 100644 --- a/resources/profiles/InfiMech/process/fdm_process_common.json +++ b/resources/profiles/InfiMech/process/fdm_process_common.json @@ -64,7 +64,6 @@ "inner_wall_line_width": "0.45", "interface_shells": "0", "internal_bridge_speed": "50%", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "monotonic", @@ -92,7 +91,6 @@ "outer_wall_line_width": "0.42", "outer_wall_speed": "200", "overhang_4_4_speed": "10", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/Kingroon.json b/resources/profiles/Kingroon.json index 0d0f98e733..4c9a128ead 100644 --- a/resources/profiles/Kingroon.json +++ b/resources/profiles/Kingroon.json @@ -1,7 +1,7 @@ { "name": "Kingroon", "url": "https://kingroon.com/", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "1", "description": "Kingroon configuration files", "machine_model_list": [ diff --git a/resources/profiles/Kingroon/machine/fdm_machine_common.json b/resources/profiles/Kingroon/machine/fdm_machine_common.json index ab1a5d4253..6e7afe6f63 100644 --- a/resources/profiles/Kingroon/machine/fdm_machine_common.json +++ b/resources/profiles/Kingroon/machine/fdm_machine_common.json @@ -156,7 +156,6 @@ "deretraction_speed": [ "30" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "M600", "wipe": [ diff --git a/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json index f91fc639a0..a29141daf1 100644 --- a/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json +++ b/resources/profiles/Kingroon/process/0.20mm Standard @Kingroon KP3S V1.json @@ -24,7 +24,6 @@ "overhang_reverse": "1", "overhang_reverse_internal_only": "1", "overhang_reverse_threshold": "0%", - "overhang_speed_classic": "1", "seam_gap": "0.1", "seam_position": "back", "slow_down_layers": "2", diff --git a/resources/profiles/Kingroon/process/fdm_process_common.json b/resources/profiles/Kingroon/process/fdm_process_common.json index ed478c1aaa..48f60ee2ab 100644 --- a/resources/profiles/Kingroon/process/fdm_process_common.json +++ b/resources/profiles/Kingroon/process/fdm_process_common.json @@ -10,7 +10,6 @@ "bottom_solid_infill_flow_ratio": "1", "bottom_surface_pattern": "monotonic", "bridge_acceleration": "50%", - "adaptive_layer_height": "0", "bridge_flow": "0.9", "brim_object_gap": "0.1", "brim_type": "auto_brim", @@ -44,7 +43,6 @@ "fuzzy_skin_point_distance": "0.8", "fuzzy_skin_thickness": "0.3", "gap_infill_speed": "100", - "tree_support_with_infill": "0", "overhang_1_4_speed": "50", "overhang_2_4_speed": "40", "overhang_3_4_speed": "20", @@ -70,7 +68,6 @@ "inner_wall_line_width": "0.45", "inner_wall_speed": "100", "interface_shells": "0", - "internal_bridge_support_thickness": "0", "internal_solid_infill_acceleration": "100%", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "100", @@ -90,7 +87,6 @@ "outer_wall_jerk": "9", "outer_wall_line_width": "0.42", "outer_wall_speed": "80", - "overhang_speed_classic": "0", "post_process": [], "precise_outer_wall": "0", "prime_tower_brim_width": "3", diff --git a/resources/profiles/LH.json b/resources/profiles/LH.json index 99a7049fa5..7784b42bed 100644 --- a/resources/profiles/LH.json +++ b/resources/profiles/LH.json @@ -1,7 +1,7 @@ { "name": "LH", "url": "https://github.com/lhndo/LH-Stinger", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "LH 3D Printer Configuration", "machine_model_list": [ diff --git a/resources/profiles/LH/machine/fdm_lh_common.json b/resources/profiles/LH/machine/fdm_lh_common.json index 277e0762eb..02a4412838 100644 --- a/resources/profiles/LH/machine/fdm_lh_common.json +++ b/resources/profiles/LH/machine/fdm_lh_common.json @@ -128,7 +128,6 @@ "z_hop_types": [ "Auto Lift" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "manual_filament_change": "1", @@ -136,7 +135,7 @@ "1" ], "default_filament_profile": [ - "LH Generic PLA" + "LHS PLA" ], "enable_filament_ramming": "0", "default_print_profile": "0.20mm Daily @LH Stinger", @@ -154,4 +153,4 @@ ], "bed_temperature_formula": "by_first_filament", "auxiliary_fan": "1" -} \ No newline at end of file +} diff --git a/resources/profiles/LH/machine/fdm_machine_common.json b/resources/profiles/LH/machine/fdm_machine_common.json index a46315dc8c..bf8f2249cf 100644 --- a/resources/profiles/LH/machine/fdm_machine_common.json +++ b/resources/profiles/LH/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -116,4 +115,4 @@ "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_pause_gcode": "M601" -} \ No newline at end of file +} diff --git a/resources/profiles/LH/process/fdm_process_common.json b/resources/profiles/LH/process/fdm_process_common.json index df8283904a..f09e319bd6 100644 --- a/resources/profiles/LH/process/fdm_process_common.json +++ b/resources/profiles/LH/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -83,7 +82,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", @@ -105,4 +103,4 @@ "top_surface_speed": "50", "gap_infill_speed": "30", "travel_speed": "200" -} \ No newline at end of file +} diff --git a/resources/profiles/LONGER.json b/resources/profiles/LONGER.json index dbf3cc3277..b4d6c3a1fb 100644 --- a/resources/profiles/LONGER.json +++ b/resources/profiles/LONGER.json @@ -1,6 +1,6 @@ { "name": "LONGER", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "0", "description": "LONGER configurations", "machine_model_list": [ diff --git a/resources/profiles/LONGER/machine/LONGER LK10 Plus.json b/resources/profiles/LONGER/machine/LONGER LK10 Plus.json index 609ed74444..69dd7c11c0 100644 --- a/resources/profiles/LONGER/machine/LONGER LK10 Plus.json +++ b/resources/profiles/LONGER/machine/LONGER LK10 Plus.json @@ -12,5 +12,5 @@ "0x0" ], "hotend_model": "", - "default_materials": "Generic PLA @System;Generic PETG @System" + "default_materials": "Generic PLA @LONGER LK10 Plus;Generic PETG @LONGER LK10 Plus" } diff --git a/resources/profiles/LONGER/machine/LONGER LK10.json b/resources/profiles/LONGER/machine/LONGER LK10.json index 7bc3ab48d4..99d27e4506 100644 --- a/resources/profiles/LONGER/machine/LONGER LK10.json +++ b/resources/profiles/LONGER/machine/LONGER LK10.json @@ -12,5 +12,5 @@ "0x0" ], "hotend_model": "", - "default_materials": "Generic PLA @System;Generic PETG @System" + "default_materials": "Generic PLA @LONGER LK10;Generic PETG @LONGER LK10" } diff --git a/resources/profiles/LONGER/machine/fdm_machine_common.json b/resources/profiles/LONGER/machine/fdm_machine_common.json index 61af4026c0..159c2c0f37 100644 --- a/resources/profiles/LONGER/machine/fdm_machine_common.json +++ b/resources/profiles/LONGER/machine/fdm_machine_common.json @@ -5,7 +5,6 @@ "instantiation": "false", "printer_technology": "FFF", "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/LONGER/process/fdm_process_common.json b/resources/profiles/LONGER/process/fdm_process_common.json index a1c777bc4b..fa3d9c97eb 100644 --- a/resources/profiles/LONGER/process/fdm_process_common.json +++ b/resources/profiles/LONGER/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Lulzbot.json b/resources/profiles/Lulzbot.json index 1d8e31dc93..1ca47d7cba 100644 --- a/resources/profiles/Lulzbot.json +++ b/resources/profiles/Lulzbot.json @@ -1,7 +1,7 @@ { "name": "Lulzbot", "url": "https://ohai.lulzbot.com/group/taz-6/", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "0", "description": "Lulzbot configurations", "machine_model_list": [ diff --git a/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json b/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json index ebb151d2b0..115d886301 100644 --- a/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json +++ b/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro S.json @@ -15,5 +15,5 @@ "machine_load_filament_time": "20", "machine_unload_filament_time": "20", "machine_tool_change_time": "5", - "default_materials": "Generic PLA @System, Generic PETG @System, Generic ABS @System" + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" } diff --git a/resources/profiles/Lulzbot/machine/fdm_machine_common.json b/resources/profiles/Lulzbot/machine/fdm_machine_common.json index b376e28164..2874e7b0fb 100644 --- a/resources/profiles/Lulzbot/machine/fdm_machine_common.json +++ b/resources/profiles/Lulzbot/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin2", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json index 8114e206de..e1bf7498eb 100644 --- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json +++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 4 or 5.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7AJRQW7g8u7CnKhZ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json index 5cf84c2791..5b5d4fa70b 100644 --- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json +++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz 6.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "K4uIiLjmRJfy0GZv", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json index f6f88cee34..c1b93d4fed 100644 --- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json +++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro Dual.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jEDhBnfwOyj5oEO8", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json index 05bf1ecca0..e70182aa1a 100644 --- a/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json +++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Taz Pro S.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "uAws1KNEUyrcJTSy", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Lulzbot/process/fdm_process_common.json b/resources/profiles/Lulzbot/process/fdm_process_common.json index 7c4803ab96..1437b79995 100644 --- a/resources/profiles/Lulzbot/process/fdm_process_common.json +++ b/resources/profiles/Lulzbot/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/M3D.json b/resources/profiles/M3D.json index cb24edb886..17d760face 100644 --- a/resources/profiles/M3D.json +++ b/resources/profiles/M3D.json @@ -1,6 +1,6 @@ { "name": "M3D", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Configuration for M3D printers", "machine_model_list": [ diff --git a/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json b/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json index 941348c128..d661bed3d1 100644 --- a/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json +++ b/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json @@ -7,6 +7,6 @@ "nozzle_diameter": "0.4", "bed_model": "M3D Enabler D8500 MM Model_bed_model.stl", "bed_texture": "M3D Enabler D8500 MM Model_bed_texture.svg", - "default_materials": "Generic PLA @system", + "default_materials": "Generic PLA @System", "scan_folder": "1" } diff --git a/resources/profiles/MagicMaker.json b/resources/profiles/MagicMaker.json index cfb4c10ac2..08e5774547 100644 --- a/resources/profiles/MagicMaker.json +++ b/resources/profiles/MagicMaker.json @@ -1,6 +1,6 @@ { "name": "MagicMaker", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "MagicMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json index 59f622953b..91054a666d 100644 --- a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json @@ -73,7 +73,7 @@ "30" ], "default_filament_profile": [ - "MM Generic PLA" + "Generic PLA @System" ], "machine_max_acceleration_e": [ "10000" diff --git a/resources/profiles/MagicMaker/machine/fdm_machine_common.json b/resources/profiles/MagicMaker/machine/fdm_machine_common.json index 256eca42de..64d90f6246 100644 --- a/resources/profiles/MagicMaker/machine/fdm_machine_common.json +++ b/resources/profiles/MagicMaker/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "10000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "0.10mm Fine @MM hj", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json index d980bd9ffa..e15e8a8268 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "JoLMVPh4bNahqirV", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json index a27ed5c8ac..7c3ca0f4c7 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hj SK.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "m6Y453vyMDxFz4c7", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json index 263c3c7e02..46feed3806 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs SF.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QI9sXxzUoh2A8c0S", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json index f04d1862e1..be0c7fa9f2 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM hqs hj.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "vCIBhcj3X7d07y9G", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json b/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json index 740aa73f40..8431418656 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine @MM slb.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "BLrg8vEj3xZyxNTo", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json index fab1e63f1d..dea3d51d65 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "fIzlKlmcI4pDKviy", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json index f7cbb71eda..331e13b30e 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hj SK.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "xngBXACjTNqOZNyB", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json index e24e6c7fd3..4039971a72 100644 --- a/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.10mm Fine Fast @MM hqs SF.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "wHOzdPcMWYZNhny2", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json index ad71011496..f9c45c30f9 100644 --- a/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.12mm Fine BestFast @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "PVbARB8V8JUBbIZG", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json index ffabaed092..cae9a2f15a 100644 --- a/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.12mm Fine SuperFast @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "gR34Ioeioizl1UXy", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json index 2c252a73e3..a308842d2c 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ON1x9dQTQTgGNLCw", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json index be5f745572..487aba341c 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hj SK.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "JoTnXrNSnHKraaeB", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json index 5e8078a0ca..02cbfacae2 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs SF.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "J9s3XNTCUjsYusKD", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json index 1fa581bbde..f749464d1c 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM hqs hj.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "MPfzxLi2GBioXdOp", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json b/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json index 59d7797359..d52e01a20e 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard @MM slb.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Ivz7U0RTrX558HQ4", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json index b3e9571756..6073685cc6 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "OZKDJHIsKAZtJTeq", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json index 20ab75cbc9..8e80392ab7 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hj SK.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "RL1Irvbsm9Fh3jNz", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json index b56e29914f..85edf0082d 100644 --- a/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.20mm Standard Fast @MM hqs SF.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "TkBYOyBebm3pMHrl", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json index 318575eb72..3a65f152ad 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QuoLlC961atuxMnn", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json index 19ac9c25a5..f9775b7624 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hj SK.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "aXpG4y73oeV4p4by", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json index e5cc84d0fb..4931eba26c 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs SF.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lZ3guqhwMGxBFtIh", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json index 1a3d053cd2..611002258a 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM hqs hj.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "yBdZW946qhSKDU4w", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json b/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json index fdf6c572e6..b02add4e63 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft @MM slb.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Clfnw7cqNtWmzjB1", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json index ef49cf7d48..82fbed8b1f 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM BoneKing.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "g2unBNIOfILyLrLQ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json index 4488948238..f9e8ebcf1d 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hj SK.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "bVabJjzFcaYFQ77o", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json index adb7fe1465..b27c6f994a 100644 --- a/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json +++ b/resources/profiles/MagicMaker/process/0.30mm Draft Fast @MM hqs SF.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "G2b2NRdM3geucH0v", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/MagicMaker/process/fdm_process_common.json b/resources/profiles/MagicMaker/process/fdm_process_common.json index 99fcd508d0..45c9bcf236 100644 --- a/resources/profiles/MagicMaker/process/fdm_process_common.json +++ b/resources/profiles/MagicMaker/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Mellow.json b/resources/profiles/Mellow.json index f0b81c832c..6f34f757a7 100644 --- a/resources/profiles/Mellow.json +++ b/resources/profiles/Mellow.json @@ -1,6 +1,6 @@ { "name": "Mellow", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Mellow Printer Profiles", "machine_model_list": [ diff --git a/resources/profiles/Mellow/machine/fdm_common_M1.json b/resources/profiles/Mellow/machine/fdm_common_M1.json index 0d7a37436a..1556cf630a 100644 --- a/resources/profiles/Mellow/machine/fdm_common_M1.json +++ b/resources/profiles/Mellow/machine/fdm_common_M1.json @@ -117,7 +117,6 @@ "40" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/Mellow/machine/fdm_machine_common.json b/resources/profiles/Mellow/machine/fdm_machine_common.json index 11833be972..a07212bae7 100644 --- a/resources/profiles/Mellow/machine/fdm_machine_common.json +++ b/resources/profiles/Mellow/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Mellow/process/fdm_process_common.json b/resources/profiles/Mellow/process/fdm_process_common.json index feb86df0e1..f37dc52e73 100644 --- a/resources/profiles/Mellow/process/fdm_process_common.json +++ b/resources/profiles/Mellow/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -84,7 +83,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/OpenEYE.json b/resources/profiles/OpenEYE.json index e29674323e..36f4ae9fac 100644 --- a/resources/profiles/OpenEYE.json +++ b/resources/profiles/OpenEYE.json @@ -1,7 +1,7 @@ { "name": "OpenEYE", "url": "http://www.openeye.tech", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "OpenEYE Printers Configurations", "machine_model_list": [ diff --git a/resources/profiles/OpenEYE/machine/fdm_machine_common.json b/resources/profiles/OpenEYE/machine/fdm_machine_common.json index 86cbf26376..d8845ab892 100644 --- a/resources/profiles/OpenEYE/machine/fdm_machine_common.json +++ b/resources/profiles/OpenEYE/machine/fdm_machine_common.json @@ -1,4 +1,8 @@ { + "type": "machine", + "name": "fdm_machine_common", + "from": "system", + "instantiation": "false", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "best_object_pos": "0.5x0.5", "change_filament_gcode": "", @@ -16,9 +20,7 @@ "extruder_offset": [ "0x0" ], - "from": "system", "gcode_flavor": "marlin", - "instantiation": "false", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end", "machine_max_acceleration_e": [ @@ -77,7 +79,6 @@ "min_layer_height": [ "0.08" ], - "name": "fdm_machine_common", "nozzle_diameter": [ "0.4" ], @@ -109,9 +110,7 @@ "retraction_speed": [ "60" ], - "silent_mode": "0", "single_extruder_multi_material": "1", - "type": "machine", "wipe": [ "1" ], diff --git a/resources/profiles/OpenEYE/machine/fdm_openeye_common.json b/resources/profiles/OpenEYE/machine/fdm_openeye_common.json index 8af6ea96eb..6bfd69da55 100644 --- a/resources/profiles/OpenEYE/machine/fdm_openeye_common.json +++ b/resources/profiles/OpenEYE/machine/fdm_openeye_common.json @@ -1,4 +1,9 @@ { + "type": "machine", + "name": "fdm_openeye_common", + "inherits": "fdm_machine_common", + "from": "system", + "instantiation": "false", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "0", "bed_exclude_area": [ @@ -38,14 +43,11 @@ "fan_kickstart": "0", "fan_speedup_overhangs": "1", "fan_speedup_time": "0", - "from": "system", "gcode_flavor": "klipper", "head_wrap_detect_zone": [], "high_current_on_filament_swap": "0", "host_type": "octoprint", "printer_agent": "moonraker", - "inherits": "fdm_machine_common", - "instantiation": "false", "layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}\n_MMU_UPDATE_HEIGHT", "long_retractions_when_cut": [ "0" @@ -137,7 +139,6 @@ "0.08" ], "min_resonance_avoidance_speed": "70", - "name": "fdm_openeye_common", "nozzle_diameter": [ "0.4", "0.4" @@ -195,7 +196,6 @@ "40" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_chamber_temp_control": "0", @@ -208,7 +208,6 @@ "travel_slope": [ "3" ], - "type": "machine", "use_firmware_retraction": "0", "use_relative_e_distances": "1", "wipe": [ diff --git a/resources/profiles/OpenEYE/process/fdm_process_common.json b/resources/profiles/OpenEYE/process/fdm_process_common.json index a1e9d13605..9ac1223f30 100644 --- a/resources/profiles/OpenEYE/process/fdm_process_common.json +++ b/resources/profiles/OpenEYE/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bottom_surface_pattern": "monotonic", @@ -33,7 +32,6 @@ "inner_wall_line_width": "0.45", "inner_wall_speed": "40", "interface_shells": "0", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": "40", "ironing_flow": "10%", diff --git a/resources/profiles/OrcaArena.json b/resources/profiles/OrcaArena.json index 866b720b78..dd5f307a95 100644 --- a/resources/profiles/OrcaArena.json +++ b/resources/profiles/OrcaArena.json @@ -1,7 +1,7 @@ { "name": "Orca Arena Printer", "url": "", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Orca Arena configuration files", "machine_model_list": [ diff --git a/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json b/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json index e375904da2..aa166a4c90 100644 --- a/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json +++ b/resources/profiles/OrcaArena/machine/Orca Arena X1 Carbon.json @@ -9,5 +9,5 @@ "bed_model": "", "bed_texture": "", "hotend_model": "", - "default_materials": "Generic PLA Silk @OrcaArena;Generic PLA @OrcaArena;Arena PLA Matte @Arena X1C;Arena PLA Basic @Arena X1C;Arena ABS @Arena X1C;Arena PC @Arena X1C;Arena Support W @Arena X1C;Arena TPU 95A @Arena X1C;PolyTerra PLA @Arena X1C;PolyLite PLA @Arena X1C;" + "default_materials": "Generic PLA Silk @OrcaArena;Generic PLA @OrcaArena;Arena PLA Matte @Arena X1C;Arena PLA Basic @Arena X1C;Arena ABS @Arena X1C;Arena PC @Arena X1C;Arena Support W @Arena X1C;Arena TPU 95A @Arena X1C;PolyTerra PLA @Arena X1C;PolyLite PLA @Arena X1C;Generic PLA @OrcaArena 0.2 nozzle" } diff --git a/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json b/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json index 84096e978c..0ce40a051a 100644 --- a/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json +++ b/resources/profiles/OrcaArena/machine/fdm_bbl_3dp_001_common.json @@ -144,7 +144,6 @@ "Spiral Lift" ], "nozzle_type": "hardened_steel", - "silent_mode": "0", "single_extruder_multi_material": "1", "machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n", "machine_end_gcode": "PRINT_END", diff --git a/resources/profiles/OrcaArena/machine/fdm_machine_common.json b/resources/profiles/OrcaArena/machine/fdm_machine_common.json index 01ece7b8a0..84a8829a59 100644 --- a/resources/profiles/OrcaArena/machine/fdm_machine_common.json +++ b/resources/profiles/OrcaArena/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/OrcaArena/process/fdm_process_arena_common.json b/resources/profiles/OrcaArena/process/fdm_process_arena_common.json index 2fda69d729..f0171b1731 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_arena_common.json +++ b/resources/profiles/OrcaArena/process/fdm_process_arena_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -31,7 +30,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/OrcaArena/process/fdm_process_common.json b/resources/profiles/OrcaArena/process/fdm_process_common.json index abe5fe9e01..f78b43e241 100644 --- a/resources/profiles/OrcaArena/process/fdm_process_common.json +++ b/resources/profiles/OrcaArena/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json index 2d58684985..6d9885f942 100644 --- a/resources/profiles/OrcaFilamentLibrary.json +++ b/resources/profiles/OrcaFilamentLibrary.json @@ -1,6 +1,6 @@ { "name": "OrcaFilamentLibrary", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Orca Filament Library", "filament_list": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json index c234e34567..36849ed63d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json @@ -23,12 +23,6 @@ "nozzle_temperature_initial_layer": [ "255" ], - "bed_temperature": [ - "100" - ], - "bed_temperature_initial_layer": [ - "100" - ], "temperature_vitrification": [ "100" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json index 7e965bc256..833356e37a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json @@ -23,12 +23,6 @@ "nozzle_temperature_initial_layer": [ "255" ], - "bed_temperature": [ - "100" - ], - "bed_temperature_initial_layer": [ - "100" - ], "temperature_vitrification": [ "100" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json index 1bc1230eae..207c17790d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "265" ], - "bed_temperature": [ - "100" - ], - "bed_temperature_initial_layer": [ - "100" - ], "temperature_vitrification": [ "95" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json index c023668f4a..cc924787f8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json @@ -23,12 +23,6 @@ "nozzle_temperature_initial_layer": [ "285" ], - "bed_temperature": [ - "100" - ], - "bed_temperature_initial_layer": [ - "100" - ], "temperature_vitrification": [ "170" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json index 15de223500..504c6dde2b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json @@ -23,12 +23,6 @@ "nozzle_temperature_initial_layer": [ "260" ], - "bed_temperature": [ - "100" - ], - "bed_temperature_initial_layer": [ - "100" - ], "temperature_vitrification": [ "100" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json index 9fce322405..f15437f295 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "275" ], - "bed_temperature": [ - "80" - ], - "bed_temperature_initial_layer": [ - "85" - ], "temperature_vitrification": [ "80" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json index 9f22293450..39afcd6759 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "250" ], - "bed_temperature": [ - "80" - ], - "bed_temperature_initial_layer": [ - "85" - ], "temperature_vitrification": [ "70" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json index a0b2f76888..cc9b7f8e54 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json @@ -23,12 +23,6 @@ "nozzle_temperature_initial_layer": [ "235" ], - "bed_temperature": [ - "60" - ], - "bed_temperature_initial_layer": [ - "60" - ], "temperature_vitrification": [ "55" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json index a9a5e83c0b..b2cc99d390 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "240" ], - "bed_temperature": [ - "60" - ], - "bed_temperature_initial_layer": [ - "60" - ], "temperature_vitrification": [ "60" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json index f06642c432..d5c9a7a87d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "245" ], - "bed_temperature": [ - "60" - ], - "bed_temperature_initial_layer": [ - "60" - ], "temperature_vitrification": [ "55" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json index 5c715dea33..35e3c75bc3 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "240" ], - "bed_temperature": [ - "30" - ], - "bed_temperature_initial_layer": [ - "35" - ], "temperature_vitrification": [ "60" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json index 81d5d81f1c..b6f622635f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "240" ], - "bed_temperature": [ - "30" - ], - "bed_temperature_initial_layer": [ - "35" - ], "temperature_vitrification": [ "60" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json index b2e0aab688..d1c1d2963f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "240" ], - "bed_temperature": [ - "30" - ], - "bed_temperature_initial_layer": [ - "35" - ], "temperature_vitrification": [ "60" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json index 027ff45226..0338bb2929 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json @@ -24,12 +24,6 @@ "nozzle_temperature_initial_layer": [ "225" ], - "bed_temperature": [ - "0" - ], - "bed_temperature_initial_layer": [ - "0" - ], "temperature_vitrification": [ "60" ], diff --git a/resources/profiles/Peopoly.json b/resources/profiles/Peopoly.json index 2a73d251f1..9b95c24bb3 100644 --- a/resources/profiles/Peopoly.json +++ b/resources/profiles/Peopoly.json @@ -1,6 +1,6 @@ { "name": "Peopoly", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Peopoly configurations", "machine_model_list": [ diff --git a/resources/profiles/Peopoly/machine/fdm_klipper_common.json b/resources/profiles/Peopoly/machine/fdm_klipper_common.json index e9a5185767..00e4209105 100644 --- a/resources/profiles/Peopoly/machine/fdm_klipper_common.json +++ b/resources/profiles/Peopoly/machine/fdm_klipper_common.json @@ -119,7 +119,6 @@ "z_hop_types": [ "Auto Lift" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Peopoly/machine/fdm_machine_common.json b/resources/profiles/Peopoly/machine/fdm_machine_common.json index f6bd23139c..c47cfdced1 100644 --- a/resources/profiles/Peopoly/machine/fdm_machine_common.json +++ b/resources/profiles/Peopoly/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Peopoly/process/fdm_process_common.json b/resources/profiles/Peopoly/process/fdm_process_common.json index 5e2f73458e..9b48c69b28 100644 --- a/resources/profiles/Peopoly/process/fdm_process_common.json +++ b/resources/profiles/Peopoly/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json b/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json index d4da354499..014fdb8ffb 100644 --- a/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json +++ b/resources/profiles/Peopoly/process/fdm_process_peopoly_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Peopoly/process/fdm_process_pply_common.json b/resources/profiles/Peopoly/process/fdm_process_pply_common.json index be008f5478..1bfb430465 100644 --- a/resources/profiles/Peopoly/process/fdm_process_pply_common.json +++ b/resources/profiles/Peopoly/process/fdm_process_pply_common.json @@ -17,7 +17,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_speed": "80", diff --git a/resources/profiles/Phrozen.json b/resources/profiles/Phrozen.json index fc5b795c37..f07568bb29 100644 --- a/resources/profiles/Phrozen.json +++ b/resources/profiles/Phrozen.json @@ -1,6 +1,6 @@ { "name": "Phrozen", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "Phrozen configurations", "machine_model_list": [ diff --git a/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json index d909765bad..c53abee956 100644 --- a/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json +++ b/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Phrozen Arco 0.4 nozzle", - "inherits": "Generic PLA @System", "renamed_from": "Phrozen PLA @Phrozen Arco 0.4 nozzle;Phrozen PLA Phrozen Arco 0.4 nozzle", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "xTeHmDOY48Bik10J", "instantiation": "true", @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "31.925" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "24.75" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json index c34d188507..963b3b4727 100644 --- a/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json +++ b/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json @@ -202,7 +202,6 @@ "45" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "0", diff --git a/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json index 74be068c38..d4bb3d5479 100644 --- a/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json +++ b/resources/profiles/Phrozen/process/0.20mm Standard @Phrozen Arco 0.4 nozzle.json @@ -127,8 +127,6 @@ "overhang_reverse": "0", "overhang_reverse_internal_only": "0", "overhang_reverse_threshold": "50%", - "overhang_speed_classic": "1", - "overhang_totally_speed": "10", "post_process": [], "precise_outer_wall": "1", "precise_z_height": "0", diff --git a/resources/profiles/Phrozen/process/fdm_process_common.json b/resources/profiles/Phrozen/process/fdm_process_common.json index 868bbc1a2e..f813b8fa7f 100644 --- a/resources/profiles/Phrozen/process/fdm_process_common.json +++ b/resources/profiles/Phrozen/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -78,7 +77,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_surface_line_width": "0.4", diff --git a/resources/profiles/Positron3D.json b/resources/profiles/Positron3D.json index d8e066ce73..d8008abb55 100644 --- a/resources/profiles/Positron3D.json +++ b/resources/profiles/Positron3D.json @@ -1,6 +1,6 @@ { "name": "Positron 3D", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Positron 3D Printer Profile", "machine_model_list": [ diff --git a/resources/profiles/Positron3D/machine/fdm_common_the_positron.json b/resources/profiles/Positron3D/machine/fdm_common_the_positron.json index 4226a5a0e4..68e95b626e 100644 --- a/resources/profiles/Positron3D/machine/fdm_common_the_positron.json +++ b/resources/profiles/Positron3D/machine/fdm_common_the_positron.json @@ -117,7 +117,6 @@ "40" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/Positron3D/machine/fdm_machine_common.json b/resources/profiles/Positron3D/machine/fdm_machine_common.json index 11833be972..a07212bae7 100644 --- a/resources/profiles/Positron3D/machine/fdm_machine_common.json +++ b/resources/profiles/Positron3D/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Positron3D/process/fdm_process_common.json b/resources/profiles/Positron3D/process/fdm_process_common.json index b8e882770a..0d558129af 100644 --- a/resources/profiles/Positron3D/process/fdm_process_common.json +++ b/resources/profiles/Positron3D/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -83,7 +82,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 57d1e2c282..723874f67d 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -1,6 +1,6 @@ { "name": "Prusa", - "version": "02.04.00.04", + "version": "02.04.00.06", "force_update": "0", "description": "Prusa configurations", "machine_model_list": [ diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json index 7d53f66645..ee328ff399 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL 5T.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa XL 5T", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @XL 5T;Prusa Generic ABS XL 5T", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "XfavDzEzzrXDQVUC", "instantiation": "true", @@ -36,8 +36,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json index abf7986c12..f6a0a45d88 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa XL.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa XL", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @XL;Prusa Generic ABS XL", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "HYHkGEjr6Kid2Xg2", "instantiation": "true", @@ -36,8 +36,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json index c0501006d2..9be4ea1ba0 100644 --- a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json +++ b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL 5T.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic FLEX @Prusa XL 5T", - "inherits": "fdm_filament_flex", "renamed_from": "Prusa Generic FLEX @XL 5T;Prusa Generic FLEX XL 5T", + "inherits": "fdm_filament_flex", "from": "system", "setting_id": "ef8fSryRYselyr4G", "filament_id": "OFbPuPKY", @@ -11,8 +11,6 @@ "filament_loading_speed": "28", "filament_unloading_speed_start": "100", "filament_unloading_speed": "90", - "filament_load_time": "0", - "filament_unload_time": "0", "filament_cooling_moves": "4", "filament_cooling_initial_speed": "2.2", "filament_cooling_final_speed": "3.4", diff --git a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json index ea56f3a8b5..24f34f49ab 100644 --- a/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json +++ b/resources/profiles/Prusa/filament/Generic FLEX @Prusa XL.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic FLEX @Prusa XL", - "inherits": "fdm_filament_flex", "renamed_from": "Prusa Generic FLEX @XL;Prusa Generic FLEX XL", + "inherits": "fdm_filament_flex", "from": "system", "setting_id": "qrFWrwgQSXgU7oCb", "filament_id": "OFbPuPKY", @@ -11,8 +11,6 @@ "filament_loading_speed": "28", "filament_unloading_speed_start": "100", "filament_unloading_speed": "90", - "filament_load_time": "0", - "filament_unload_time": "0", "filament_cooling_moves": "4", "filament_cooling_initial_speed": "2.2", "filament_cooling_final_speed": "3.4", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json index 9f70295142..52e208e7c9 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL 5T.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa XL 5T", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @XL 5T;Prusa Generic PETG XL 5T", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "DNJECSjW6zKYALxE", "instantiation": "true", @@ -37,8 +37,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "3", "filament_cooling_initial_speed": "5", "filament_cooling_final_speed": "2.5", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json index 0cdcbfc1c4..78a3e589b2 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa XL.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa XL", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @XL;Prusa Generic PETG XL", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "8vcNv4b4H7aYA01G", "instantiation": "true", @@ -37,8 +37,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "3", "filament_cooling_initial_speed": "5", "filament_cooling_final_speed": "2.5", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json index 6dbefec6be..532ccba57a 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL 5T.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa XL 5T", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @XL 5T;Prusa Generic PLA XL 5T", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "wDxtZLt5J2JODMBq", "instantiation": "true", @@ -34,8 +34,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json index ff8f343b41..4e560f4bac 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa XL.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa XL", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @XL;Prusa Generic PLA XL", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "27u5AiklUhmExsys", "instantiation": "true", @@ -34,8 +34,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json b/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json index fdb63e2e68..43aed0f993 100644 --- a/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament ASA @XL 5T.json @@ -6,7 +6,9 @@ "setting_id": "IQu91UAWOJOQcUq9", "filament_id": "OFmFwUWM", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "260", "nozzle_temperature": "260", "hot_plate_temp_initial_layer": "100", @@ -39,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament ASA @XL.json b/resources/profiles/Prusa/filament/Prusament ASA @XL.json index c07021a9c3..d118538809 100644 --- a/resources/profiles/Prusa/filament/Prusament ASA @XL.json +++ b/resources/profiles/Prusa/filament/Prusament ASA @XL.json @@ -6,7 +6,9 @@ "setting_id": "RaEoFoZdXkkOz9yh", "filament_id": "OFmFwUWM", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "260", "nozzle_temperature": "260", "hot_plate_temp_initial_layer": "100", @@ -39,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json index af306fd2a7..80a9653148 100644 --- a/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament PA-CF @XL 5T.json @@ -6,7 +6,9 @@ "setting_id": "FYerOcjToJ3ABpu1", "filament_id": "OF54SvEe", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "275", "nozzle_temperature": "285", "hot_plate_temp_initial_layer": "100", @@ -39,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json index f843be92a0..957a27f8cc 100644 --- a/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json +++ b/resources/profiles/Prusa/filament/Prusament PA-CF @XL.json @@ -6,7 +6,9 @@ "setting_id": "IrL4iU2kkMBHIw3e", "filament_id": "OF54SvEe", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "275", "nozzle_temperature": "285", "hot_plate_temp_initial_layer": "100", @@ -39,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json index 922492ce7c..ff60e677cb 100644 --- a/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @XL 5T.json @@ -41,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json index 2ea273902c..d3fdac3873 100644 --- a/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @XL.json @@ -41,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json index 0c6d1a3cdb..7ef720791d 100644 --- a/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament PC-CF @XL 5T.json @@ -6,7 +6,9 @@ "setting_id": "m1YND6uz3GWeVIBG", "filament_id": "OFjz0a3m", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "285", "nozzle_temperature": "285", "hot_plate_temp_initial_layer": "100", @@ -39,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json index 572b970d02..44abf2918e 100644 --- a/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json +++ b/resources/profiles/Prusa/filament/Prusament PC-CF @XL.json @@ -6,7 +6,9 @@ "setting_id": "Eq5x2CcEUUAZ5aof", "filament_id": "OFjz0a3m", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "285", "nozzle_temperature": "285", "hot_plate_temp_initial_layer": "100", @@ -39,8 +41,6 @@ "filament_loading_speed": "14", "filament_unloading_speed_start": "100", "filament_unloading_speed": "20", - "filament_load_time": "15", - "filament_unload_time": "12", "filament_cooling_moves": "5", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "50", diff --git a/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json index e0db59fde9..95e9ecc79b 100644 --- a/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament PETG @XL 5T.json @@ -36,8 +36,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "3", "filament_cooling_initial_speed": "5", "filament_cooling_final_speed": "2.5", diff --git a/resources/profiles/Prusa/filament/Prusament PETG @XL.json b/resources/profiles/Prusa/filament/Prusament PETG @XL.json index f26140a0eb..56c2fa7a2b 100644 --- a/resources/profiles/Prusa/filament/Prusament PETG @XL.json +++ b/resources/profiles/Prusa/filament/Prusament PETG @XL.json @@ -36,8 +36,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "3", "filament_cooling_initial_speed": "5", "filament_cooling_final_speed": "2.5", diff --git a/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json index efda9cf4e3..ae302e09eb 100644 --- a/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament PLA @XL 5T.json @@ -33,8 +33,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Prusament PLA @XL.json b/resources/profiles/Prusa/filament/Prusament PLA @XL.json index 9d02a67491..b5d006dc46 100644 --- a/resources/profiles/Prusa/filament/Prusament PLA @XL.json +++ b/resources/profiles/Prusa/filament/Prusament PLA @XL.json @@ -33,8 +33,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json b/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json index 366c6043cd..2c689937cf 100644 --- a/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament PVB @XL 5T.json @@ -6,7 +6,9 @@ "setting_id": "DIrPylH6rmu6YA43", "filament_id": "OFh7mvPO", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "215", "nozzle_temperature": "215", "hot_plate_temp_initial_layer": "75", @@ -40,8 +42,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Prusament PVB @XL.json b/resources/profiles/Prusa/filament/Prusament PVB @XL.json index 4a9a858c06..01df675ba1 100644 --- a/resources/profiles/Prusa/filament/Prusament PVB @XL.json +++ b/resources/profiles/Prusa/filament/Prusament PVB @XL.json @@ -6,7 +6,9 @@ "setting_id": "RF55nfxQwqUqe00Q", "filament_id": "OFh7mvPO", "instantiation": "true", - "filament_vendor": ["Prusa Polymers"], + "filament_vendor": [ + "Prusa Polymers" + ], "nozzle_temperature_intial_layer": "215", "nozzle_temperature": "215", "hot_plate_temp_initial_layer": "75", @@ -40,8 +42,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json b/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json index 8bfc482af6..1b847cb1c8 100644 --- a/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json +++ b/resources/profiles/Prusa/filament/Prusament rPLA @XL 5T.json @@ -36,8 +36,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json index 9ed3d9af74..97c4f6d108 100644 --- a/resources/profiles/Prusa/filament/Prusament rPLA @XL.json +++ b/resources/profiles/Prusa/filament/Prusament rPLA @XL.json @@ -36,8 +36,6 @@ "filament_loading_speed": "10", "filament_unloading_speed_start": "100", "filament_unloading_speed": "100", - "filament_load_time": "10.5", - "filament_unload_time": "8.5", "filament_cooling_moves": "2", "filament_cooling_initial_speed": "10", "filament_cooling_final_speed": "3.5", diff --git a/resources/profiles/Prusa/machine/Prusa CORE One HF.json b/resources/profiles/Prusa/machine/Prusa CORE One HF.json index 027ef3e2d0..2c75795ff5 100644 --- a/resources/profiles/Prusa/machine/Prusa CORE One HF.json +++ b/resources/profiles/Prusa/machine/Prusa CORE One HF.json @@ -3,7 +3,7 @@ "name": "Prusa CORE One HF", "bed_model": "coreone_bed.stl", "bed_texture": "coreone.svg", - "default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One", + "default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @Prusa CORE One HF 0.6;Generic PLA @Prusa CORE One HF 0.8", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/machine/Prusa CORE One L HF.json b/resources/profiles/Prusa/machine/Prusa CORE One L HF.json index 57287f0380..08f23ca781 100644 --- a/resources/profiles/Prusa/machine/Prusa CORE One L HF.json +++ b/resources/profiles/Prusa/machine/Prusa CORE One L HF.json @@ -3,7 +3,7 @@ "name": "Prusa CORE One L HF", "bed_model": "coreonel_bed.stl", "bed_texture": "coreonel.svg", - "default_materials": "Generic PLA @Prusa CORE One", + "default_materials": "Generic PLA @Prusa CORE One;Generic PLA @Prusa CORE One HF 0.4;Generic PLA @System", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/machine/Prusa CORE One L.json b/resources/profiles/Prusa/machine/Prusa CORE One L.json index 87bc587830..290659a2a4 100644 --- a/resources/profiles/Prusa/machine/Prusa CORE One L.json +++ b/resources/profiles/Prusa/machine/Prusa CORE One L.json @@ -3,7 +3,7 @@ "name": "Prusa CORE One L", "bed_model": "coreonel_bed.stl", "bed_texture": "coreonel.svg", - "default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One", + "default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @System", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/machine/Prusa CORE One.json b/resources/profiles/Prusa/machine/Prusa CORE One.json index b9907aca2e..3388083a65 100644 --- a/resources/profiles/Prusa/machine/Prusa CORE One.json +++ b/resources/profiles/Prusa/machine/Prusa CORE One.json @@ -3,7 +3,7 @@ "name": "Prusa CORE One", "bed_model": "coreone_bed.stl", "bed_texture": "coreone.svg", - "default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One", + "default_materials": "Generic ABS @Prusa CORE One;Generic ASA @Prusa CORE One;Generic PETG @Prusa CORE One;Generic PLA @Prusa CORE One;Generic PLA Silk @Prusa CORE One;Generic TPU @Prusa CORE One;Generic PLA @Prusa CORE One 0.6;Generic PLA @Prusa CORE One 0.8", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/machine/Prusa MK4S HF.json b/resources/profiles/Prusa/machine/Prusa MK4S HF.json index 088715b835..157766c122 100644 --- a/resources/profiles/Prusa/machine/Prusa MK4S HF.json +++ b/resources/profiles/Prusa/machine/Prusa MK4S HF.json @@ -3,7 +3,7 @@ "name": "Prusa MK4S HF", "bed_model": "mk4_bed.stl", "bed_texture": "mk4s.svg", - "default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S", + "default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S;Generic PLA @Prusa MK4S HF0.6;Generic PLA @Prusa MK4S HF0.8", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/machine/Prusa MK4S.json b/resources/profiles/Prusa/machine/Prusa MK4S.json index 2f6bd3e45f..e3f598023b 100644 --- a/resources/profiles/Prusa/machine/Prusa MK4S.json +++ b/resources/profiles/Prusa/machine/Prusa MK4S.json @@ -3,7 +3,7 @@ "name": "Prusa MK4S", "bed_model": "mk4_bed.stl", "bed_texture": "mk4s.svg", - "default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S", + "default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S;Generic PLA @Prusa MK4S 0.6;Generic PLA @Prusa MK4S 0.8", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/process/fdm_process_common.json b/resources/profiles/Prusa/process/fdm_process_common.json index b8e882770a..0d558129af 100644 --- a/resources/profiles/Prusa/process/fdm_process_common.json +++ b/resources/profiles/Prusa/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -83,7 +82,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index 9a67c47cd0..25ffa10171 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -1,6 +1,6 @@ { "name": "Qidi", - "version": "02.04.00.12", + "version": "02.04.00.14", "force_update": "0", "description": "Qidi configurations", "machine_model_list": [ diff --git a/resources/profiles/Qidi/machine/Qidi Q2.json b/resources/profiles/Qidi/machine/Qidi Q2.json index d7f9e8bf62..6b05ae57b0 100644 --- a/resources/profiles/Qidi/machine/Qidi Q2.json +++ b/resources/profiles/Qidi/machine/Qidi Q2.json @@ -8,5 +8,5 @@ "bed_model": "qidi_q2_buildplate_model.stl", "bed_texture": "qidi_q2_buildplate_texture.svg", "hotend_model": "X-Series_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF;QIDI PLA Rapido @Qidi Q2 0.2 nozzle;QIDI PLA Rapido @Qidi Q2 0.4 nozzle;QIDI PLA Rapido @Qidi Q2 0.6 nozzle;QIDI PLA Rapido @Qidi Q2 0.8 nozzle" } diff --git a/resources/profiles/Qidi/machine/Qidi Q2C.json b/resources/profiles/Qidi/machine/Qidi Q2C.json index cdc45e8f5e..462814d225 100644 --- a/resources/profiles/Qidi/machine/Qidi Q2C.json +++ b/resources/profiles/Qidi/machine/Qidi Q2C.json @@ -8,5 +8,5 @@ "bed_model": "qidi_q2c_buildplate_model.stl", "bed_texture": "qidi_q2c_buildplate_texture.svg", "hotend_model": "X-Series_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;QIDI PET-CF;QIDI PLA Rapido @Qidi Q2C 0.2 nozzle;QIDI PLA Rapido @Qidi Q2C 0.4 nozzle;QIDI PLA Rapido @Qidi Q2C 0.6 nozzle;QIDI PLA Rapido @Qidi Q2C 0.8 nozzle" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 3.json b/resources/profiles/Qidi/machine/Qidi X-Max 3.json index 99888a8acf..ce2cfe8c26 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 3.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 3.json @@ -8,5 +8,5 @@ "bed_model": "qidi_xmax3_buildplate_model.stl", "bed_texture": "qidi_xmax3_buildplate_texture.svg", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi;Generic PLA @Qidi X-Max 3 0.2 nozzle" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 4.json b/resources/profiles/Qidi/machine/Qidi X-Max 4.json index 4d67f77537..5e1b05cc11 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 4.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 4.json @@ -8,5 +8,5 @@ "bed_model": "qidi_xmax4_buildplate_model.stl", "bed_texture": "qidi_xmax4_buildplate_texture.svg", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "Generic ABS @Qidi X-Max 4 0.4 nozzle;Generic PLA @Qidi X-Max 4 0.4 nozzle;QIDI ABS Odorless @Qidi X-Max 4 0.4 nozzle;QIDI ABS Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Matte @Qidi X-Max 4 0.4 nozzle;QIDI PLA-CF @Qidi X-Max 4 0.4 nozzle;Generic PLA Silk @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Silk @Qidi X-Max 4 0.4 nozzle;QIDI ASA @Qidi X-Max 4 0.4 nozzle;QIDI PETG Basic @Qidi X-Max 4 0.4 nozzle;QIDI PETG Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PETG Tough @Qidi X-Max 4 0.4 nozzle;QIDI PETG Translucent @Qidi X-Max 4 0.4 nozzle;QIDI PLA Basic @Qidi X-Max 4 0.4 nozzle;QIDI PLA Matte Basic @Qidi X-Max 4 0.4 nozzle;Generic PETG @Qidi X-Max 4 0.4 nozzle" + "default_materials": "Generic ABS @Qidi X-Max 4 0.4 nozzle;Generic PLA @Qidi X-Max 4 0.4 nozzle;QIDI ABS Odorless @Qidi X-Max 4 0.4 nozzle;QIDI ABS Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Matte @Qidi X-Max 4 0.4 nozzle;QIDI PLA-CF @Qidi X-Max 4 0.4 nozzle;Generic PLA Silk @Qidi X-Max 4 0.4 nozzle;QIDI PLA Rapido Silk @Qidi X-Max 4 0.4 nozzle;QIDI ASA @Qidi X-Max 4 0.4 nozzle;QIDI PETG Basic @Qidi X-Max 4 0.4 nozzle;QIDI PETG Rapido @Qidi X-Max 4 0.4 nozzle;QIDI PETG Tough @Qidi X-Max 4 0.4 nozzle;QIDI PETG Translucent @Qidi X-Max 4 0.4 nozzle;QIDI PLA Basic @Qidi X-Max 4 0.4 nozzle;QIDI PLA Matte Basic @Qidi X-Max 4 0.4 nozzle;Generic PETG @Qidi X-Max 4 0.4 nozzle;Generic PLA @Qidi X-Max 4 0.2 nozzle;Generic PLA @Qidi X-Max 4 0.6 nozzle;Generic PLA @Qidi X-Max 4 0.8 nozzle" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json index 84df7f37be..e527fe85b4 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 3.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 3.json @@ -8,5 +8,5 @@ "bed_model": "qidi_xplus3_buildplate_model.stl", "bed_texture": "qidi_xplus3_buildplate_texture.svg", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi;Generic PLA @Qidi X-Plus 3 0.2 nozzle" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4.json index ac34a73e34..69a757212e 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 4.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4.json @@ -8,5 +8,5 @@ "bed_model": "qidi_xplus4_buildplate_model.stl", "bed_texture": "qidi_xplus4_buildplate_texture.svg", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;Generic PETG @Qidi" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PETG Tough;QIDI PLA Rapido Matte;QIDI ASA;Generic PETG @Qidi;QIDI PLA Rapido @Qidi X-Plus 4 0.2 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.4 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.6 nozzle;QIDI PLA Rapido @Qidi X-Plus 4 0.8 nozzle" } diff --git a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json index 75b3d2e252..7cacb82e87 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Smart 3.json +++ b/resources/profiles/Qidi/machine/Qidi X-Smart 3.json @@ -8,5 +8,5 @@ "bed_model": "qidi_xsmart3_buildplate_model.stl", "bed_texture": "qidi_xsmart3_buildplate_texture.svg", "hotend_model": "qidi_xseries_gen3_hotend.stl", - "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi" + "default_materials": "QIDI PLA Rapido;QIDI ABS Rapido;QIDI PLA Rapido Matte;QIDI PETG Tough;QIDI ASA;Generic ASA @Qidi;Generic ABS @Qidi;Generic PETG @Qidi;Generic PLA Silk @Qidi;Generic PLA @Qidi;Generic PLA @Qidi X-Smart 3 0.2 nozzle" } diff --git a/resources/profiles/Qidi/machine/fdm_machine_common.json b/resources/profiles/Qidi/machine/fdm_machine_common.json index 2d5fc3ead3..50bcc2255c 100644 --- a/resources/profiles/Qidi/machine/fdm_machine_common.json +++ b/resources/profiles/Qidi/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Qidi/machine/fdm_machine_x_common.json b/resources/profiles/Qidi/machine/fdm_machine_x_common.json index b8a14c80ec..b2b0359a39 100644 --- a/resources/profiles/Qidi/machine/fdm_machine_x_common.json +++ b/resources/profiles/Qidi/machine/fdm_machine_x_common.json @@ -133,7 +133,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "wipe_tower_type": "type1", "support_air_filtration": [ diff --git a/resources/profiles/Qidi/machine/fdm_q_common.json b/resources/profiles/Qidi/machine/fdm_q_common.json index 94fbffd64d..a8915e8895 100644 --- a/resources/profiles/Qidi/machine/fdm_q_common.json +++ b/resources/profiles/Qidi/machine/fdm_q_common.json @@ -126,7 +126,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "wipe_tower_type": "type1", "support_air_filtration": [ diff --git a/resources/profiles/Qidi/machine/fdm_qidi_common.json b/resources/profiles/Qidi/machine/fdm_qidi_common.json index 38b39c4591..69ca7c731f 100644 --- a/resources/profiles/Qidi/machine/fdm_qidi_common.json +++ b/resources/profiles/Qidi/machine/fdm_qidi_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "wipe_tower_type": "type1", "change_filament_gcode": "", diff --git a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json index 93be914bd5..ce87f787ca 100644 --- a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4 0.2 nozzle.json @@ -46,7 +46,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.22", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json index 499d8ad5cb..741e7b059d 100644 --- a/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.08mm Extra Fine @X-Max 4.json @@ -51,7 +51,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "450" ], diff --git a/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json index 2f49cb3ba1..b80777804a 100644 --- a/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/process/0.10mm Standard @X-Max 4 0.2 nozzle.json @@ -37,7 +37,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.22", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json index 70d97f84ab..ab474d3b97 100644 --- a/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Max 4 0.2 nozzle.json @@ -40,7 +40,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.22", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json index 7bafb22f06..170ab2c68d 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi X3.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_qidi_x3_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json index 993afe4898..1bb3d04914 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XCFPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "iQXhsvqnRSjNDxK1", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json index 897fdb4504..5dfa794d9f 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Ls6f3OYdkl6qG2i2", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json index ab371384d3..3ec7004f02 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @Qidi XPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "4Gy3FqymogmRSeVq", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json b/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json index 932a708742..900f78219e 100644 --- a/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.12mm Fine @X-Max 4.json @@ -50,7 +50,6 @@ "small_perimeter_threshold": [ "50" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "430" ], diff --git a/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json b/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json index d734a14634..9273f4b6b9 100644 --- a/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.16mm Balanced Quality @X-Max 4.json @@ -41,7 +41,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "200" diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json index 4b5aa16e59..242cce03cd 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi X3.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_qidi_x3_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json index 3f0504ddb3..e5154cf932 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XCFPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "HLcracgY90tIkYwN", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json index 7e058d924d..0546913457 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "6Be5iq2K9VppN5gE", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json index 7cb52d8cbc..fa3e8bf18a 100644 --- a/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.16mm Optimal @Qidi XPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "R1lqL3bMvvg6NMgD", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json b/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json index 91d939fec5..4d2d0ff172 100644 --- a/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.16mm Standard @X-Max 4.json @@ -44,7 +44,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "330" ], diff --git a/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json index 8d281627ea..9fb86119f4 100644 --- a/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Max 4 0.6 nozzle.json @@ -56,7 +56,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.62", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json b/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json index 5c879d83ab..ab94482de0 100644 --- a/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.20mm Balanced Strength @X-Max 4.json @@ -39,7 +39,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "270" ], diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json index 2866bac399..490386d1a6 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XCFPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "WqYCTn83Ln11dpYC", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json index 74cc5c814f..edca0c62d1 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "2lJE6tuEIL22NBc2", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json index 4dd2935975..4e5922dd23 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @Qidi XPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "MDu610revkMyZze1", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json b/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json index 4bbea2ec6d..74d0ebc2d0 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @X-Max 4.json @@ -32,7 +32,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "270" ], diff --git a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json index 53429a10d1..f6a25ed90b 100644 --- a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Max 4 0.8 nozzle.json @@ -56,7 +56,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.82", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json index 646cf814e4..8579e2af21 100644 --- a/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/process/0.24mm Balanced Strength @X-Max 4 0.6 nozzle.json @@ -53,7 +53,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.62", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json index 787113e6c6..467be12aec 100644 --- a/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.24mm Draft @Qidi X3.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_qidi_x3_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json b/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json index 3aeb4203e4..ff6aba1a7a 100644 --- a/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json +++ b/resources/profiles/Qidi/process/0.24mm Standard @X-Max 4.json @@ -39,7 +39,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_speed": [ "230" ], diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json index c6e0b75c76..7a0387f859 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q1 Pro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "o9SQqZdG3BoviCAx", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json index 1aa6974b57..e59977ac1c 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QyCGFIxjMVprexDS", "instantiation": "true", - "adaptive_layer_height": "1", "enable_arc_fitting": "0", "reduce_crossing_wall": "0", "layer_height": "0.25", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json index 7a5d9d09aa..af40d35529 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi Q2C.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "e0Mbd6kjHG3Tc7Zm", "instantiation": "true", - "adaptive_layer_height": "1", "enable_arc_fitting": "0", "reduce_crossing_wall": "0", "layer_height": "0.25", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json index f29ef5d037..e8640beb97 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XCFPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QfqK00Ymn3ss9qtU", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json index 1eca5fc51b..c97620af69 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "YomLQtTbuHeQfrip", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json index 529864b872..16d7d96f97 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XMax3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "M8F4v1shW7h3QyzC", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json index a9026d4c86..93b6d30ab5 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "g73f1lIj9eH0MZjW", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json index 7767956bb8..c5adf500e1 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "tAV9akzom1NHWPNJ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json index 75bf45cef6..b09aa82c4e 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XPlus4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QvbM5h9XXrvsmdX6", "instantiation": "true", - "adaptive_layer_height": "1", "enable_arc_fitting": "0", "reduce_crossing_wall": "0", "layer_height": "0.25", diff --git a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json index 4990f0d9f0..0bc4fd8252 100644 --- a/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.25mm Draft @Qidi XSmart3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "lag9UwMZ0uLbg6P2", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json index 555f8f19d0..3d88261b84 100644 --- a/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json +++ b/resources/profiles/Qidi/process/0.28mm Extra Draft @Qidi X3.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_qidi_x3_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json index aa4f96eb58..a9245997d2 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q1 Pro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "D5MjSxw3jZYf2Nja", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json index d9ea812425..fa5d74ece1 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "xV59wYWbrstGW5c5", "instantiation": "true", - "adaptive_layer_height": "1", "enable_arc_fitting": "0", "reduce_crossing_wall": "0", "layer_height": "0.3", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json index cc97b6c1b8..1565426d32 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi Q2C.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "96u0HvMr7kqleKBl", "instantiation": "true", - "adaptive_layer_height": "1", "enable_arc_fitting": "0", "reduce_crossing_wall": "0", "layer_height": "0.3", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json index d5237c4d37..0279d555da 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XCFPro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "gR2HeEDYyNSjL2K7", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json index a0dba6c233..f4f34baaa8 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "UA6RvPAtMfb2ryBL", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.30", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json index d4abe3eeb6..10a1ed451b 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XMax3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "QECWa3aznaYRN11W", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json index 72754c9145..d115d557cf 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "jjrl5R7LpUXnxA8d", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json index 732f5aa155..16e6bc8ee2 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "TPJTTWCWFbrVv0bx", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json index 9825272cce..dd498c072d 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XPlus4.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "PypLIvy1do9mp98q", "instantiation": "true", - "adaptive_layer_height": "1", "enable_arc_fitting": "0", "reduce_crossing_wall": "0", "layer_height": "0.3", diff --git a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json index 4e5d2e235c..462a355cf9 100644 --- a/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json +++ b/resources/profiles/Qidi/process/0.30mm Extra Draft @Qidi XSmart3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "gzZakw9J3bzbD5D8", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.3", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json index 7622dd4325..a57a8f3f24 100644 --- a/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/process/0.30mm Standard @X-Max 4 0.6 nozzle.json @@ -53,7 +53,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.62", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json index 052f88bb4a..4e1a4b322f 100644 --- a/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/process/0.32mm Balanced Strength @X-Max 4 0.8 nozzle.json @@ -56,7 +56,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.82", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json index 4aa16d0e45..1589706881 100644 --- a/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/process/0.40mm Standard @X-Max 4 0.8 nozzle.json @@ -56,7 +56,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "4", "sparse_infill_line_width": "0.82", "sparse_infill_speed": [ "100" diff --git a/resources/profiles/Qidi/process/fdm_process_common.json b/resources/profiles/Qidi/process/fdm_process_common.json index 134d389c22..2216d70bd0 100644 --- a/resources/profiles/Qidi/process/fdm_process_common.json +++ b/resources/profiles/Qidi/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Qidi/process/fdm_process_n_common.json b/resources/profiles/Qidi/process/fdm_process_n_common.json index 629d64338d..599becff50 100644 --- a/resources/profiles/Qidi/process/fdm_process_n_common.json +++ b/resources/profiles/Qidi/process/fdm_process_n_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "apply_top_surface_compensation": "0", "avoid_crossing_wall_includes_support": "0", "bottom_color_penetration_layers": "3", @@ -70,7 +69,6 @@ "150" ], "interface_shells": "0", - "internal_bridge_support_thickness": "0.8", "internal_solid_infill_line_width": "0.42", "internal_solid_infill_speed": [ "150" @@ -105,9 +103,6 @@ "overhang_4_4_speed": [ "10" ], - "overhang_totally_speed": [ - "10" - ], "override_filament_scarf_seam_setting": "0", "prime_tower_width": "35", "print_sequence": "by layer", @@ -149,7 +144,6 @@ "small_perimeter_threshold": [ "4" ], - "smooth_coefficient": "90", "smooth_speed_discontinuity_area": "1", "sparse_infill_density": "15%", "sparse_infill_line_width": "0.45", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_common.json index 3a7676e3fe..bf4d53c8ca 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json index 176add07f7..2f044b9790 100644 --- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json +++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -46,7 +45,6 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "grid", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/RH3D.json b/resources/profiles/RH3D.json index 4cb9ab573e..dbf9500ca0 100644 --- a/resources/profiles/RH3D.json +++ b/resources/profiles/RH3D.json @@ -1,6 +1,6 @@ { "name": "RH3D", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "RH3D - printer profiles", "machine_model_list": [ diff --git a/resources/profiles/RH3D/process/fdm_process_common.json b/resources/profiles/RH3D/process/fdm_process_common.json index 2cf6e41151..4f02e37fa6 100644 --- a/resources/profiles/RH3D/process/fdm_process_common.json +++ b/resources/profiles/RH3D/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "1", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonicline", @@ -86,7 +85,6 @@ "support_object_xy_distance": "0.4", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Raise3D.json b/resources/profiles/Raise3D.json index b224025f6d..5f98b967d4 100644 --- a/resources/profiles/Raise3D.json +++ b/resources/profiles/Raise3D.json @@ -1,7 +1,7 @@ { "name": "Raise3D", "url": "", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Raise3D configurations", "machine_model_list": [ diff --git a/resources/profiles/Raise3D/machine/fdm_machine_common.json b/resources/profiles/Raise3D/machine/fdm_machine_common.json index b4aada4829..a2c7c89e17 100644 --- a/resources/profiles/Raise3D/machine/fdm_machine_common.json +++ b/resources/profiles/Raise3D/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json index 30d3f1cc61..8a6759c78a 100644 --- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "mlb2242fJxu26dnV", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.1", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json index 35e21d67e7..a288122e2e 100644 --- a/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.10mm Fine @Raise3D Pro3Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "u9vhB9uigwzA2mli", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.1", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json index bdcccf16fb..a027a6d90c 100644 --- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ADqZgpU4D612lSnf", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json index 7f88195b88..981c91f39a 100644 --- a/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.20mm Standard @Raise3D Pro3Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "GhwsrGu8tZexCrOy", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json index 91e24b6ebf..4fd5df2d25 100644 --- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json +++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "p0KdJttce5WMx30N", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json index d2d299ca64..ff1b0f158c 100644 --- a/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json +++ b/resources/profiles/Raise3D/process/0.25mm Draft @Raise3D Pro3Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "tgWE9Ph7i1F7OweA", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Raise3D/process/fdm_process_common.json b/resources/profiles/Raise3D/process/fdm_process_common.json index 164ff9d58a..d3568a9bec 100644 --- a/resources/profiles/Raise3D/process/fdm_process_common.json +++ b/resources/profiles/Raise3D/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "10", diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json index 09ce326368..743333f9aa 100644 --- a/resources/profiles/Ratrig.json +++ b/resources/profiles/Ratrig.json @@ -1,6 +1,6 @@ { "name": "RatRig", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "RatRig configurations", "machine_model_list": [ diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json index 3b43d60a23..decababc1c 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-300.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json index 71eb9724f9..c6cea0faf6 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-400.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json index 47cd8fba2f..e7b6ab132a 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-500.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json index 4731e90901..bbe022e658 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 300.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-300.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json index 86963d7e73..8269490619 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 400.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-400.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json index 7b61ebe531..87aa3dd70d 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 HYBRID 500.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-500.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json index f2831e5919..9868dae17f 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-300-clone-mode.stl", "bed_texture": "ratrig_logo_copy_mode.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json index a14770104f..26a3f7fb1f 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-300-clone-mode.stl", "bed_texture": "ratrig_logo_mirror_mode.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json index 1a477fb750..ce26c28226 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-300.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json index 327c56d036..ad2080aa77 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-400-clone-mode.stl", "bed_texture": "ratrig_logo_copy_mode.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json index 2e72109e25..09e28665d4 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-400-clone-mode.stl", "bed_texture": "ratrig_logo_mirror_mode.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json index e6c7405f9a..f37a7eabca 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-400.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json index bc27a53e94..2169db2cbd 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-500-clone-mode.stl", "bed_texture": "ratrig_logo_copy_mode.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json index 3518748830..c8996519f6 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-500-clone-mode.stl", "bed_texture": "ratrig_logo_mirror_mode.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json index 59ff011a82..3950a331e8 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500.json @@ -8,5 +8,5 @@ "bed_model": "ratrig-vcore-bed-500.stl", "bed_texture": "ratrig_logo.svg", "hotend_model": "", - "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig" + "default_materials": "Generic ABS @RatRig;Generic PLA @RatRig;Generic PLA-CF @RatRig;Generic PCTG @RatRig;Generic PETG @RatRig;Generic TPU @RatRig;Generic ASA @RatRig;Generic PC @RatRig;Generic PVA @RatRig;Generic PA @RatRig;Generic PA-CF @RatRig;Generic PLA @System" } diff --git a/resources/profiles/Ratrig/machine/fdm_klipper_common.json b/resources/profiles/Ratrig/machine/fdm_klipper_common.json index 28ad9ce02c..ecd93a2346 100644 --- a/resources/profiles/Ratrig/machine/fdm_klipper_common.json +++ b/resources/profiles/Ratrig/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "manual_filament_change": "1", "change_filament_gcode": "M600", diff --git a/resources/profiles/Ratrig/machine/fdm_machine_common.json b/resources/profiles/Ratrig/machine/fdm_machine_common.json index ad1efd697f..36f0b6ec55 100644 --- a/resources/profiles/Ratrig/machine/fdm_machine_common.json +++ b/resources/profiles/Ratrig/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Ratrig/process/fdm_process_common.json b/resources/profiles/Ratrig/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Ratrig/process/fdm_process_common.json +++ b/resources/profiles/Ratrig/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json index 65ccb82fa2..486cc31dd5 100644 --- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json index d17f7836a1..cd96b51721 100644 --- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common_idex.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json b/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json index 120b8835a5..72aa3cf9bc 100644 --- a/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json +++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_idex.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/RolohaunDesign.json b/resources/profiles/RolohaunDesign.json index 398937c127..e0b7a33301 100644 --- a/resources/profiles/RolohaunDesign.json +++ b/resources/profiles/RolohaunDesign.json @@ -1,6 +1,6 @@ { "name": "RolohaunDesign", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "RolohaunDesign Printer Profiles", "machine_model_list": [ diff --git a/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json b/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json index 8438cea7a1..a3c418d16b 100644 --- a/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json +++ b/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json @@ -117,7 +117,6 @@ "40" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json b/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json index 11833be972..a07212bae7 100644 --- a/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json +++ b/resources/profiles/RolohaunDesign/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/RolohaunDesign/process/fdm_process_common.json b/resources/profiles/RolohaunDesign/process/fdm_process_common.json index feb86df0e1..f37dc52e73 100644 --- a/resources/profiles/RolohaunDesign/process/fdm_process_common.json +++ b/resources/profiles/RolohaunDesign/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -84,7 +83,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/SecKit.json b/resources/profiles/SecKit.json index 42ac381eb6..91804bff0a 100644 --- a/resources/profiles/SecKit.json +++ b/resources/profiles/SecKit.json @@ -1,6 +1,6 @@ { "name": "SecKit", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "SecKit configurations", "machine_model_list": [ diff --git a/resources/profiles/SecKit/machine/fdm_klipper_common.json b/resources/profiles/SecKit/machine/fdm_klipper_common.json index 4bb08f7367..ed2826f9b4 100644 --- a/resources/profiles/SecKit/machine/fdm_klipper_common.json +++ b/resources/profiles/SecKit/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "120" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "M600", "machine_pause_gcode": "M601", diff --git a/resources/profiles/SecKit/machine/fdm_machine_common.json b/resources/profiles/SecKit/machine/fdm_machine_common.json index 010f5b7f8d..555c649235 100644 --- a/resources/profiles/SecKit/machine/fdm_machine_common.json +++ b/resources/profiles/SecKit/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "8000" ], diff --git a/resources/profiles/SecKit/process/fdm_process_common.json b/resources/profiles/SecKit/process/fdm_process_common.json index dc8cfe5838..11a4dc616e 100644 --- a/resources/profiles/SecKit/process/fdm_process_common.json +++ b/resources/profiles/SecKit/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/SecKit/process/fdm_process_seckit_common.json b/resources/profiles/SecKit/process/fdm_process_seckit_common.json index d5aca251f3..f29305479e 100644 --- a/resources/profiles/SecKit/process/fdm_process_seckit_common.json +++ b/resources/profiles/SecKit/process/fdm_process_seckit_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/SeeMeCNC.json b/resources/profiles/SeeMeCNC.json index 43a273d52c..21db5e4e3e 100644 --- a/resources/profiles/SeeMeCNC.json +++ b/resources/profiles/SeeMeCNC.json @@ -1,6 +1,6 @@ { "name": "SeeMeCNC", - "version": "2.4.0.04", + "version": "2.4.0.05", "force_update": "1", "description": "SeeMeCNC configurations - Full profile set for Artemis, BOSSdelta, and RostockMAX printers", "machine_model_list": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json index 4230dbffa0..23ccc8cd08 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC Artemis 300", "thumbnail": "SeeMeCNC Artemis 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json index 4ed8e34f2a..f16bdf8620 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC Artemis 300", "thumbnail": "SeeMeCNC Artemis 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json index 7e457fd6d4..7bf1733799 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC Artemis 300", "thumbnail": "SeeMeCNC Artemis 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json index e6beab9437..68316ff085 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC Artemis 300", "thumbnail": "SeeMeCNC Artemis 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json index b3c0d66457..4709989e11 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0505", "thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json index 3171ed1d16..a09599a118 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0505", "thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json index 60aea06e56..a045d6acb6 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0505", "thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json index 52131a4df3..4fbdc6cdf0 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0505", "thumbnail": "SeeMeCNC BOSSdelta 500 0505_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json index d9bbabfd46..1d40d2b7d8 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0510", "thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json index 48054cbc25..f007e2c307 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0510", "thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json index 60653bd138..ae455b50bc 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0510", "thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json index 29aab8351f..28a865c33e 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0510", "thumbnail": "SeeMeCNC BOSSdelta 500 0510_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json index ca0c54be9b..6db1c32408 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0521", "thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json index e66ebbb170..0bba926946 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0521", "thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json index 33db8f630d..623edc7966 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0521", "thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json index 2b9d48d170..9f1b324a3b 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 500 0521", "thumbnail": "SeeMeCNC BOSSdelta 500 0521_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json index 765cbd623f..51ca348ee2 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 300", "thumbnail": "SeeMeCNC BOSSdelta 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json index 20c6446d2e..78638f67ad 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 300", "thumbnail": "SeeMeCNC BOSSdelta 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json index fc91f14b28..d3d58505ed 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 300", "thumbnail": "SeeMeCNC BOSSdelta 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json index 01ab5d5a2a..c2ffdb20a0 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC BOSSdelta 300", "thumbnail": "SeeMeCNC BOSSdelta 300_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json index 2b0a6a71ae..c53c7f7085 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v3.2", "thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json index b2ba2a38aa..3e8b24699f 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v3.2", "thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json index fae10fc27c..d1fd58da56 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v3.2", "thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json index f65c62f6fe..648c797d61 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v3.2", "thumbnail": "SeeMeCNC RostockMAX v3.2_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json index 38c29c2462..39252fa29e 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v4", "thumbnail": "SeeMeCNC RostockMAX v4_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json index f54bc1bcb6..f1dbfc5e2f 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v4", "thumbnail": "SeeMeCNC RostockMAX v4_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json index 51cef23180..c7bce4faca 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v4", "thumbnail": "SeeMeCNC RostockMAX v4_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json index 0342bbae65..f1ec174cf2 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json @@ -312,7 +312,6 @@ "60" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "1", "support_air_filtration": "1", "support_chamber_temp_control": "1", @@ -349,4 +348,4 @@ "model": "SeeMeCNC RostockMAX v4", "thumbnail": "SeeMeCNC RostockMAX v4_cover.png", "description": "SeeMeCNC configurations" -} \ No newline at end of file +} diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index d2309f6974..06acef0b0e 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.13", + "version": "02.04.00.15", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json index 48740f94bc..af8c929c82 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 base.json @@ -35,12 +35,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json index b75f8d84d3..409bbdd793 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 base.json @@ -32,12 +32,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json index f421f08c94..21638631aa 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @0.2 nozzle.json @@ -43,12 +43,6 @@ "filament_unloading_speed": [ "25" ], - "filament_load_time": [ - "0" - ], - "filament_unload_time": [ - "0" - ], "filament_cooling_moves": [ "0" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json index 2629e15051..478a0195bd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ABS @base.json @@ -32,12 +32,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json index 5f1f1bd74f..4344959e27 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @0.2 nozzle.json @@ -40,12 +40,6 @@ "filament_unloading_speed": [ "25" ], - "filament_load_time": [ - "0" - ], - "filament_unload_time": [ - "0" - ], "filament_cooling_moves": [ "0" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json index 7f54df76bb..fe567e1744 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual ASA @base.json @@ -29,12 +29,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json index bdb539a065..46644cc06a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual Breakaway @base.json @@ -17,12 +17,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json index 5390ffe222..de2e0c9765 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PA-CF @base.json @@ -29,12 +29,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json index 84cd37dfe7..4a93202495 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PET @base.json @@ -23,12 +23,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json index ea5c61eb3b..12b546ebb1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG @base.json @@ -29,12 +29,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json index 5e8a40a8af..8e9a3b5f12 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PETG-CF @base.json @@ -44,12 +44,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json index 1d8a6fe9ba..dff0922c5c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA @base.json @@ -20,12 +20,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json index 0f880ac980..86540058c8 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Eco @base.json @@ -23,12 +23,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json index 6838983e1b..9daad839c2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Matte @base.json @@ -23,12 +23,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json index 7080dddad1..3cb49e16e7 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Metal @base.json @@ -26,12 +26,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json index f2024f8ddf..1272b220a1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA Silk @base.json @@ -32,12 +32,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json index d9b45b5f79..768a85d0db 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PLA-CF @base.json @@ -32,12 +32,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json index d9bc0f80ed..2fd81db581 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual PVA @base.json @@ -17,12 +17,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json b/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json index 903ea5c744..327f146f45 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Dual TPU @base.json @@ -17,12 +17,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json b/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json index 3d3e47b701..83a7666218 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker J1 ABS Benchy.json @@ -54,12 +54,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json index 62b54feb70..b402e7f76a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PA-CF @U1 base.json @@ -32,12 +32,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json index 2dae11ec36..0741102696 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PET @U1 base.json @@ -26,12 +26,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json index ce0e7c8122..d081c6f9d8 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG @U1 base.json @@ -32,12 +32,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json index 47869c9779..076dc7e2b9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 base.json @@ -47,12 +47,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json index 5611cb34f3..3f41d5579e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json @@ -23,12 +23,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json index d6e7e209c6..e29003f72c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json @@ -25,12 +25,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json index c305704269..67e0d74b2e 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json @@ -26,12 +26,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json index e69ca63254..97d2a7ea61 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json @@ -23,12 +23,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json index 21384a0567..9f4ff4b7f9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Lite @U1 base.json @@ -22,12 +22,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json index d8b3ebef60..31607ed7c6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json @@ -22,12 +22,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json index 109dbc19e7..6c56447e5a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json @@ -25,12 +25,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json index 1db2d82548..87c26fdb09 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json @@ -29,12 +29,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json index 37bc90db26..5f0ca9ed36 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json @@ -35,12 +35,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json index b87c48cbe5..5391a85078 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json @@ -22,12 +22,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json index 1ed79183c9..4b67d00391 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json @@ -23,12 +23,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json index 962c6fcccb..cfdfe78b74 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json @@ -35,12 +35,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json index 206f024091..f2b2033dd9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json @@ -20,12 +20,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json index 6ad1de856e..7a43d5715a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json @@ -20,12 +20,6 @@ "filament_unloading_speed": [ "35" ], - "filament_load_time": [ - "2" - ], - "filament_unload_time": [ - "2" - ], "filament_cooling_moves": [ "2" ], diff --git a/resources/profiles/Snapmaker/filament/fdm_filament_common.json b/resources/profiles/Snapmaker/filament/fdm_filament_common.json index 04c0a64a6f..82b033cda5 100644 --- a/resources/profiles/Snapmaker/filament/fdm_filament_common.json +++ b/resources/profiles/Snapmaker/filament/fdm_filament_common.json @@ -114,12 +114,6 @@ "filament_unloading_speed": [ "25" ], - "filament_load_time": [ - "0" - ], - "filament_unload_time": [ - "0" - ], "filament_toolchange_delay": [ "0" ], diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json index a6e55cb7bd..6a96cfb494 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 BKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "1921635482", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json index 3544179344..80ace374c7 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual BKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "1463587605", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json index 89845097d4..733d7096fb 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QS+B Kit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "3396626756", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json index f6c9ae9663..83e77458c1 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual QSKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "2661871200", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json index a1c0587025..86085a641a 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 Dual.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "2728546690", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json index c28a8b0e39..937bf20bdd 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 QS+B Kit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "3626883798", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json index a47a224e8f..dd0b5e8e46 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250 QSKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "3817522582", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A250.json b/resources/profiles/Snapmaker/machine/Snapmaker A250.json index acdd0983c6..16a93e5957 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A250.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A250.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "261851393", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A250_bed.stl", "bed_texture": "Snapmaker A250_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json index 69dbfea029..60a09d7519 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 BKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "3190019076", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json index b0d390f5e3..321002ad53 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual BKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "2326416016", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json index a2971119fb..6ca04fc169 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QS+B Kit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "1305649671", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json index 0154fcf801..7798d13413 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual QSKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "61280022", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json index 5c7b9aede1..f18dc6cfcf 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 Dual.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "1846038812", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350 Dual_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json index 0d780ef3d5..dd71d8312c 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 QS+B Kit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "1133024953", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json b/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json index 433fffebef..80573646c4 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350 QSKit.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "4109488597", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker A350.json b/resources/profiles/Snapmaker/machine/Snapmaker A350.json index 231c8a7137..de5b92e6c5 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker A350.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker A350.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "240771894", + "default_materials": "PolyTerra PLA @0.2 nozzle;Snapmaker PLA", "bed_model": "Snapmaker A350_bed.stl", "bed_texture": "Snapmaker A350_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json b/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json index 667d195628..e3a3f17c24 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker Artisan.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "797581801", + "default_materials": "PolyTerra Dual PLA @0.2 nozzle;Snapmaker Dual PLA", "bed_model": "Snapmaker Artisan_bed.stl", "bed_texture": "Snapmaker Artisan_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker J1.json b/resources/profiles/Snapmaker/machine/Snapmaker J1.json index 46ef45fa15..087d33768f 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker J1.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker J1.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "https://github.com/macdylan", "model_id": "199828459", + "default_materials": "PolyTerra J1 PLA @0.2 nozzle;PolyTerra J1 PLA", "bed_model": "Snapmaker J1_bed.stl", "bed_texture": "Snapmaker J1_texture.svg", "nozzle_diameter": "0.2;0.4;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1.json b/resources/profiles/Snapmaker/machine/Snapmaker U1.json index fb703f2e75..96eb53f81a 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1.json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1.json @@ -5,6 +5,7 @@ "family": "Snapmaker", "url": "", "model_id": "797581801", + "default_materials": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle;Panchroma PLA @Snapmaker U1;Generic PLA @System;Snapmaker PLA SnapSpeed @U1 0.6 nozzle;Snapmaker PLA SnapSpeed @U1 0.8 nozzle", "bed_model": "Snapmaker U1_bed.stl", "bed_texture": "Snapmaker U1_texture.svg", "nozzle_diameter": "0.2;0.4;0.4+0.6;0.6;0.8" diff --git a/resources/profiles/Snapmaker/machine/fdm_common.json b/resources/profiles/Snapmaker/machine/fdm_common.json index 50b8cb2cdd..fac7898ce3 100644 --- a/resources/profiles/Snapmaker/machine/fdm_common.json +++ b/resources/profiles/Snapmaker/machine/fdm_common.json @@ -7,7 +7,6 @@ "pause_gcode": "M600 ;pause print", "nozzle_type": "hardened_steel", "use_relative_e_distances": "1", - "silent_mode": "0", "auxiliary_fan": "0", "remaining_times": "1", "single_extruder_multi_material": "0", diff --git a/resources/profiles/Snapmaker/machine/fdm_klipper.json b/resources/profiles/Snapmaker/machine/fdm_klipper.json index ccb53f7e7d..ca389bdf37 100644 --- a/resources/profiles/Snapmaker/machine/fdm_klipper.json +++ b/resources/profiles/Snapmaker/machine/fdm_klipper.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json index 1b6a068387..aadd744bf0 100644 --- a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json +++ b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json index 3dec06228e..15546ce4bb 100644 --- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -11,8 +11,6 @@ "outer_wall_acceleration": "2000", "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json index 7c80e048f6..3881460bda 100644 --- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json index b8a8e126aa..0a3ba43c86 100644 --- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "Tayg0K1WRyJMLoke", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json index 27d3903f06..2aeb309d58 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -11,8 +11,6 @@ "outer_wall_acceleration": "2000", "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json index 677e6742d9..107731b2cb 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -15,8 +15,6 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json index b4728bd60f..ea8c719085 100644 --- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json index 80b2120807..6fc26cd55f 100644 --- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -11,8 +11,6 @@ "outer_wall_acceleration": "2000", "outer_wall_speed": "60", "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json index 80739205ac..d33ce1c083 100644 --- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json index 2da54a6dc3..6de6d483da 100644 --- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "xBU1j8ldOefYfosp", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json index 9302a40421..a5f215d7f3 100644 --- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -15,8 +15,6 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "180", "top_surface_speed": "150", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json index cc93a97e99..632d9614f7 100644 --- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json index 54513eb14b..0de823db1f 100644 --- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.2 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json index 416d85881c..1306485d6f 100644 --- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -15,8 +15,6 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json index 6871a3e120..838f250e8c 100644 --- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "ERcgRLp5bQo1hgz8", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json index 77b756bffc..88fbb33812 100644 --- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json index da92006d49..be894aa221 100644 --- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "BBXxXQCXCme2Mvy0", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json index 5d873d5efd..443afe55dd 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "XR5r9SuWmSag5Qjo", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json index 63bb6ea170..b4e22777e8 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json @@ -17,8 +17,6 @@ "internal_solid_infill_line_width": "105%", "support_line_width": "105%", "top_surface_line_width": "105%", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "prime_tower_width": "30", "slowdown_for_curled_perimeters": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json index d1bb174a62..5c87ff68d0 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Standard 0.2 mm layer height profile for the Snapmaker U1 with 0.6 mm nozzles. Balances print speed and surface quality for everyday prints.", "layer_height": "0.20", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json index 91c5995b92..1d051fc801 100644 --- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json @@ -8,8 +8,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", "outer_wall_speed": "60", "sparse_infill_density": "25%", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "wall_loops": "6", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json index 0cb85cc26d..577065ca3f 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "4whjHJVCN44w8SPE", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json index f98007b6e1..8e09376daf 100644 --- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "MYRo7jTenu7F0Zv4", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json index 7a9f4e2154..2fa2eeabdb 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json index d9e1a2bf94..316bb0dbee 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.8 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json index 4382b11e41..8829efafdb 100644 --- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json @@ -6,8 +6,6 @@ "setting_id": "0fSeyAIS6z75A1r3", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json index 52eb63a64d..defbc6740b 100644 --- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Fast draft profile for the Snapmaker U1 with 0.6 mm nozzles. 0.3 mm layer height for quick prototypes and functional parts.", "layer_height": "0.30", - "smooth_coefficient": "80", - "overhang_totally_speed": "40", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json index e2d5c192bb..92bebf6219 100644 --- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json index c216eb09d2..f268a92446 100644 --- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json @@ -9,8 +9,6 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json index d2c20559fd..de7559f827 100644 --- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.8 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json index 44ea3bb3f4..6dc9f26329 100644 --- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json index 37238fb0ea..b18e30c210 100644 --- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.", "layer_height": "0.40", - "smooth_coefficient": "80", - "overhang_totally_speed": "30", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json index 8d00eb9fab..b0cf935465 100644 --- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.8 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json index d3e4bf7f07..eaa04faadc 100644 --- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.6 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json index d6cdf607dd..599cf24db5 100644 --- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.8 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json index 9f67114c20..ca728fe66a 100644 --- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Snapmaker U1 (0.8 nozzle)" ], diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json index 72dab0c16b..4e0d7bf6e6 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json @@ -3,7 +3,6 @@ "name": "fdm_process_U1", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", @@ -66,7 +65,5 @@ "prime_tower_width": "60", "xy_hole_compensation": "0", "xy_contour_compensation": "0", - "compatible_printers": [], - "smooth_coefficient": "80", - "overhang_totally_speed": "24" + "compatible_printers": [] } diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json index 462ddb53ae..5240f242c4 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json @@ -17,7 +17,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_speed": "30", diff --git a/resources/profiles/Snapmaker/process/fdm_process_common.json b/resources/profiles/Snapmaker/process/fdm_process_common.json index 458a0f6162..13e5825ebd 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "layer_height": "0.2", "initial_layer_print_height": "0.3", "line_width": "0.42", @@ -72,7 +71,6 @@ "infill_combination": "0", "detect_narrow_internal_solid_infill": "1", "ensure_vertical_shell_thickness": "1", - "internal_bridge_support_thickness": "0.8", "initial_layer_speed": "50", "initial_layer_infill_speed": "50", "initial_layer_travel_speed": "80%", @@ -86,7 +84,6 @@ "support_interface_speed": "50", "ironing_speed": "35", "enable_overhang_speed": "1", - "overhang_speed_classic": "0", "overhang_1_4_speed": "35", "overhang_2_4_speed": "25", "overhang_3_4_speed": "15", @@ -129,7 +126,6 @@ "tree_support_adaptive_layer_height": "1", "tree_support_auto_brim": "1", "tree_support_brim_width": "3", - "tree_support_with_infill": "0", "support_top_z_distance": "0.12", "support_bottom_z_distance": "0.12", "support_base_pattern": "rectilinear", diff --git a/resources/profiles/Sovol.json b/resources/profiles/Sovol.json index 9562873886..7f08417ed7 100644 --- a/resources/profiles/Sovol.json +++ b/resources/profiles/Sovol.json @@ -1,7 +1,7 @@ { "name": "Sovol", "url": "", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "0", "description": "Sovol configurations", "machine_model_list": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 MAX.json b/resources/profiles/Sovol/machine/Sovol SV08 MAX.json index 92a92a9a1d..df4690f54b 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 MAX.json @@ -8,5 +8,5 @@ "bed_model": "sovol_sv08_max_buildplate_model.stl", "bed_texture": "sovol_sv08_max_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic PLA;Generic PLA Silk;Generic ABS;Generic PETG;Polymaker PETG;SUNLU PETG;Generic TPU;Generic PC" + "default_materials": "Generic PLA @Sovol SV08 MAX;Generic PLA Silk @Sovol SV08 MAX;Generic ABS @Sovol SV08 MAX;Generic PETG @Sovol SV08 MAX;Polymaker PETG @Sovol SV08 MAX;SUNLU PETG @Sovol SV08 MAX;Generic TPU @Sovol SV08 MAX;Generic PC @Sovol SV08 MAX" } diff --git a/resources/profiles/Sovol/machine/fdm_machine_common.json b/resources/profiles/Sovol/machine/fdm_machine_common.json index 017b725d2e..0a804a2e5e 100644 --- a/resources/profiles/Sovol/machine/fdm_machine_common.json +++ b/resources/profiles/Sovol/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -113,7 +112,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "z_hop_types": "Normal Lift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", diff --git a/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json index 9d44b2f112..ebe3c8679f 100644 --- a/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.08mm High Quality @Sovol SV06 ACE 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "WQqoRN1avqbX8Pgd", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.08", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json b/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json index 8ab14fe775..9718bacd69 100644 --- a/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json +++ b/resources/profiles/Sovol/process/0.10mm Standard @Sovol SV08 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "sTiNnwPQInBM8oMT", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.10", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json index f95e107e59..fcc8cb2817 100644 --- a/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.12mm Quality @Sovol SV06 ACE 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "EGRlZsIz0TvybH5a", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json b/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json index 27723eb6fb..f4fc63ed23 100644 --- a/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json +++ b/resources/profiles/Sovol/process/0.12mm Standard @Sovol SV06 ACE 0.2 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "1nAnGTBSg9NbEjRl", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json index 5a9ceee897..2f41d5a509 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV01Pro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "C5l9Xp7PFZJ8EUuI", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json index b86f3c50ab..f46285f806 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV02.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "XGwpYXpDBGmz3IST", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json index 3f5b032956..b4b0c6acaa 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV05.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "hx4TRRO93eAhKRlo", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json index 3c7bc35311..f23714d5aa 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "rDtPKzMhHP85acXh", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json index ab14ae1852..1c62c68ea7 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV06Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "L1YTQWBe8jGxUG5n", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json index ca8fffec79..b11502689c 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "CCj4nI9LPvB6tBwv", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json index 0f1251d22d..e84fae24b7 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV07Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Y7BQqmsJc3sCg5M4", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json index a36b67382e..45a9e0f34d 100644 --- a/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json +++ b/resources/profiles/Sovol/process/0.18mm Optimal @Sovol SV08.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dtNZVowJXglP0ygk", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json b/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json index d4102b9521..bedd71ef41 100644 --- a/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.20mm High-Speed @Sovol SV06.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "S1iAf6JiKSas9AMw", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json index a830bec966..56a3c7ad3e 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "CFwXlxanOmqsdA48", "name": "0.20mm Standard @Sovol SV01", - "from": "system", "inherits": "fdm_process_common", + "from": "system", + "setting_id": "CFwXlxanOmqsdA48", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json index 4d7be1276a..298356b0a5 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV01Pro.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "i3AkK2cR13YkyVrJ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json index 65a6f16806..836581fbca 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV02.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ASEHMkWIP3Z7M6Eg", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json index 529ffbc648..e53d0f99ee 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV05.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "qz3ogX30ClF0lLRt", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json index 22efbbb514..44bd8afa66 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 ACE.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "vJmKSRBaoZ7y02CV", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json index 39f9f21d9c..28c730ac6b 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06 Plus ACE.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "7qkFiEhE4BGMZrDJ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json index 45d822eb85..b913b12187 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "cremVs4Sj00nBWtu", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json index 700232a310..511c44ad5f 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV06Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "bku5PsptBdjUrbQ6", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json index 4781a94d88..865a30cb6d 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "D6GOAXI1isGTNnfb", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json index 5e8957e16c..8d6484e7f8 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV07Plus.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "88ExWsak5lVw9qYZ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json index 7178632118..84450ca0f0 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "v0m5eV5ZVA813MVP", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json index 32cbc84429..c3da799594 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "sPSDTG9mKjIOuy4m", "name": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle", - "from": "system", "inherits": "fdm_process_common", + "from": "system", + "setting_id": "sPSDTG9mKjIOuy4m", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "100%", "layer_height": "0.20", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json index 3411f92dab..3584a15477 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol SV08.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "vYejAtfzNoeBDq00", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.20", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json index 6b1ea0db9a..323553beaa 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "ShJTVnJ492No1j2j", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "1", "max_travel_detour_distance": "100%", "layer_height": "0.20", diff --git a/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json index 19862486c1..d4a0610587 100644 --- a/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Ydon9OsrFa7A8L1F", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.28", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json index 0b4210b7f3..39612b5a56 100644 --- a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json +++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV06 ACE 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "n7KDWYlaTDObslGp", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.30", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json index aa4c3fb129..3b2cb68b92 100644 --- a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json +++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 0.6 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "VGWhB6OKWJrzkfrC", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.30", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json index be242638fa..dc8d3df0ba 100644 --- a/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json +++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol SV08 MAX 0.6 nozzle.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "EhJl99Rdzr3bYnjW", "name": "0.30mm Standard @Sovol SV08 MAX 0.6 nozzle", - "from": "system", "inherits": "fdm_process_common", + "from": "system", + "setting_id": "EhJl99Rdzr3bYnjW", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "100%", "layer_height": "0.30", diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json index 165d9817f9..964172accb 100644 --- a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json +++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV06 ACE 0.8 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "hkA5BT13eWBp5BKQ", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.40", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json index ccb9e95529..10e154842a 100644 --- a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json +++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 0.8 nozzle.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "THLtL3Q597dBsUgK", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.40", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json index e56135a018..20481d3719 100644 --- a/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json +++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json @@ -1,11 +1,10 @@ { "type": "process", - "setting_id": "5UL3y12LS7RXWO0d", "name": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle", - "from": "system", "inherits": "fdm_process_common", + "from": "system", + "setting_id": "5UL3y12LS7RXWO0d", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "max_travel_detour_distance": "100%", "layer_height": "0.40", diff --git a/resources/profiles/Sovol/process/fdm_process_common.json b/resources/profiles/Sovol/process/fdm_process_common.json index 0d9a2c994f..4f32e17501 100644 --- a/resources/profiles/Sovol/process/fdm_process_common.json +++ b/resources/profiles/Sovol/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Tiertime.json b/resources/profiles/Tiertime.json index 0aab493c03..a7efecf420 100644 --- a/resources/profiles/Tiertime.json +++ b/resources/profiles/Tiertime.json @@ -1,6 +1,6 @@ { "name": "Tiertime", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "0", "description": "Tiertime configurations", "machine_model_list": [ diff --git a/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json b/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json index 7f937ef561..18e17f9b05 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP300 HS.json @@ -8,5 +8,5 @@ "bed_model": "", "bed_texture": "", "hotend_model": "", - "default_materials": "Tiertime ABS;Tiertime PLA" + "default_materials": "Tiertime ABS;Tiertime PLA;Tiertime PLA@300HS" } diff --git a/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json b/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json index 0ae3b64d9a..cab3e4503c 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP600 HS.json @@ -8,5 +8,5 @@ "bed_model": "", "bed_texture": "", "hotend_model": "", - "default_materials": "Tiertime ABS;Tiertime PLA" + "default_materials": "Tiertime ABS;Tiertime PLA;Tiertime PLA@300HS" } diff --git a/resources/profiles/Tiertime/machine/fdm_machine_common.json b/resources/profiles/Tiertime/machine/fdm_machine_common.json index d4a5c3be25..fbe40f97e3 100644 --- a/resources/profiles/Tiertime/machine/fdm_machine_common.json +++ b/resources/profiles/Tiertime/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Tiertime/machine/fdm_tiertime_common.json b/resources/profiles/Tiertime/machine/fdm_tiertime_common.json index de802f566a..66d1d1e858 100644 --- a/resources/profiles/Tiertime/machine/fdm_tiertime_common.json +++ b/resources/profiles/Tiertime/machine/fdm_tiertime_common.json @@ -1,9 +1,9 @@ { "type": "machine", "name": "fdm_tiertime_common", + "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", - "inherits": "fdm_machine_common", "gcode_flavor": "klipper", "machine_max_acceleration_e": [ "5000", @@ -117,15 +117,12 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ "1" ], - "default_filament_profile": [ - "" - ], + "default_filament_profile": [], "default_print_profile": "0.20mm Standard @Tiertime UP400 Pro", "bed_exclude_area": [ "0x0" diff --git a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json index d9ef9fe332..53b0175f21 100644 --- a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP400 Pro 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a smaller layer height and results in smoother surface and higher printing quality.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json index 241b319114..902078336c 100644 --- a/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.18mm Fine @Tiertime UP600 HS 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a smaller layer height and results in smoother surface and higher printing quality.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json index c45c24b84a..81ab969572 100644 --- a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP400 Pro 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a smaller layer height and results in smoother surface and higher printing quality.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json index 0eadac356d..d62180d9aa 100644 --- a/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.24mm Fine @Tiertime UP600 HS 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a smaller layer height and results in smoother surface and higher printing quality.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json index abccc0329b..a2248af5dc 100644 --- a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP400 Pro 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a balanced layer height for good quality and reasonable printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json index 9e04a6e6b5..26b61969cc 100644 --- a/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.24mm Standard @Tiertime UP600 HS 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a balanced layer height for good quality and reasonable printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json index 34d74cb1ad..50635f3825 100644 --- a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP400 Pro 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json index 747872499e..95bffc096b 100644 --- a/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.30mm Standard @Tiertime UP600 HS 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json index 82e011345f..38a14009e4 100644 --- a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP400 Pro 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height with optimized settings for stronger parts.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "sparse_infill_density": "25%", "wall_loops": "3", "compatible_printers": [ diff --git a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json index 03d21e34d1..41c823cfa7 100644 --- a/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.30mm Strength @Tiertime UP600 HS 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height with optimized settings for stronger parts.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "sparse_infill_density": "25%", "wall_loops": "3", "compatible_printers": [ diff --git a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json index ff33334f90..f03358440b 100644 --- a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP400 Pro 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a balanced layer height for good quality and reasonable printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json index 8eaeb571af..ffa7019f3d 100644 --- a/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.32mm Standard @Tiertime UP600 HS 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a balanced layer height for good quality and reasonable printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json index 71090fa613..fc918c5c68 100644 --- a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP400 Pro 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a bigger layer height for faster printing but with more visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json index 5e192e28ee..45772b22a5 100644 --- a/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.36mm Draft @Tiertime UP600 HS 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a bigger layer height for faster printing but with more visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json index d3518d81d5..f308def5b4 100644 --- a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP400 Pro 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json index ef0ee0040d..ae3b7dc3d3 100644 --- a/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.40mm Standard @Tiertime UP600 HS 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json index 1e850801ca..3e06b09767 100644 --- a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP400 Pro 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has the biggest layer height for fastest printing but with very visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json index 7d2afaea09..dfa351b066 100644 --- a/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/process/0.42mm Extra Draft @Tiertime UP600 HS 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has the biggest layer height for fastest printing but with very visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.6 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json index f48c94c1b1..0e5575991d 100644 --- a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP400 Pro 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a bigger layer height for faster printing but with more visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json index c09e4c24e8..34a9b0439b 100644 --- a/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.48mm Draft @Tiertime UP600 HS 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a bigger layer height for faster printing but with more visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json index 4ba7a7af61..059ac43c3f 100644 --- a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP400 Pro 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has the biggest layer height for fastest printing but with very visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP400 Pro 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json index dab79b259d..54af1e8588 100644 --- a/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json +++ b/resources/profiles/Tiertime/process/0.56mm Extra Draft @Tiertime UP600 HS 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has the biggest layer height for fastest printing but with very visible layer lines.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Tiertime UP600 HS 0.8 nozzle" ] diff --git a/resources/profiles/Tiertime/process/fdm_process_common.json b/resources/profiles/Tiertime/process/fdm_process_common.json index ca4d181e78..26eb3a50a0 100644 --- a/resources/profiles/Tiertime/process/fdm_process_common.json +++ b/resources/profiles/Tiertime/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "50", diff --git a/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json b/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json index 3b0906e2e9..6cd3aa3014 100644 --- a/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json +++ b/resources/profiles/Tiertime/process/fdm_process_tiertime_common.json @@ -21,7 +21,6 @@ "top_surface_acceleration": "2000", "initial_layer_acceleration": "500", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_line_width": "0.5", "initial_layer_speed": "50", "initial_layer_infill_speed": "90", diff --git a/resources/profiles/Tronxy.json b/resources/profiles/Tronxy.json index 32cf5ffa69..ac146b9850 100644 --- a/resources/profiles/Tronxy.json +++ b/resources/profiles/Tronxy.json @@ -1,6 +1,6 @@ { "name": "Tronxy", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Tronxy configurations", "machine_model_list": [ diff --git a/resources/profiles/Tronxy/machine/fdm_machine_common.json b/resources/profiles/Tronxy/machine/fdm_machine_common.json index fc02a60619..2ca47511d7 100644 --- a/resources/profiles/Tronxy/machine/fdm_machine_common.json +++ b/resources/profiles/Tronxy/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Tronxy/process/fdm_process_common.json b/resources/profiles/Tronxy/process/fdm_process_common.json index 8c2401bfb7..7f80f8bc79 100644 --- a/resources/profiles/Tronxy/process/fdm_process_common.json +++ b/resources/profiles/Tronxy/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json b/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json index beca23a8bb..940a5e590d 100644 --- a/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json +++ b/resources/profiles/Tronxy/process/fdm_process_tronxy_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/TwoTrees.json b/resources/profiles/TwoTrees.json index 7817792c99..5d97581ffc 100644 --- a/resources/profiles/TwoTrees.json +++ b/resources/profiles/TwoTrees.json @@ -1,6 +1,6 @@ { "name": "TwoTrees", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "1", "description": "TwoTrees configurations", "machine_model_list": [ diff --git a/resources/profiles/TwoTrees/machine/TwoTrees SK1.json b/resources/profiles/TwoTrees/machine/TwoTrees SK1.json index 5674e7c408..a15fdfd12e 100644 --- a/resources/profiles/TwoTrees/machine/TwoTrees SK1.json +++ b/resources/profiles/TwoTrees/machine/TwoTrees SK1.json @@ -8,5 +8,5 @@ "bed_model": "TwoTrees SK1_buildplate_model.stl", "bed_texture": "TwoTrees SK1_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic TPU 95A @TwoTrees SK1;TwoTrees Generic PETG @SK1;Generic HS PLA @TwoTrees SK1;TwoTrees Generic PLA @SK1;TwoTrees Generic PLA-CF @SK1;TwoTrees Generic PLA Matte @SK1;TwoTrees Generic PLA Silk @SK1" + "default_materials": "Generic TPU 95A @TwoTrees SK1;Generic PETG @System;Generic HS PLA @TwoTrees SK1;Generic PLA @System;Generic PLA-CF @System;Generic PLA Matte @System;Generic PLA Silk @System" } diff --git a/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json b/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json index a1e8548b5b..cde6900374 100644 --- a/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json +++ b/resources/profiles/TwoTrees/machine/TwoTrees SP-5 Klipper.json @@ -8,5 +8,5 @@ "bed_model": "SP-5_bed.stl", "bed_texture": "SP-5_texture.svg", "hotend_model": "", - "default_materials": "TwoTrees Generic ABS;TwoTrees Generic PLA;TwoTrees Generic PLA-CF;TwoTrees Generic PETG;TwoTrees Generic TPU;TwoTrees Generic ASA;TwoTrees Generic PC;TwoTrees Generic PVA;TwoTrees Generic PA;TwoTrees Generic PA-CF" + "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System" } diff --git a/resources/profiles/TwoTrees/machine/fdm_klipper_common.json b/resources/profiles/TwoTrees/machine/fdm_klipper_common.json index ce04b2d6e8..596334cf2e 100644 --- a/resources/profiles/TwoTrees/machine/fdm_klipper_common.json +++ b/resources/profiles/TwoTrees/machine/fdm_klipper_common.json @@ -118,7 +118,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE\n", @@ -126,7 +125,7 @@ "1" ], "default_filament_profile": [ - "TwoTrees Generic PLA" + "Generic PLA @System" ], "bed_exclude_area": [ "0x0" diff --git a/resources/profiles/TwoTrees/machine/fdm_machine_common.json b/resources/profiles/TwoTrees/machine/fdm_machine_common.json index fc02a60619..2ca47511d7 100644 --- a/resources/profiles/TwoTrees/machine/fdm_machine_common.json +++ b/resources/profiles/TwoTrees/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json b/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json index db4e413741..bcfdfdbb66 100644 --- a/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json +++ b/resources/profiles/TwoTrees/process/fdm_process_TwoTrees_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/TwoTrees/process/fdm_process_common.json b/resources/profiles/TwoTrees/process/fdm_process_common.json index c769a23e7c..651e12c439 100644 --- a/resources/profiles/TwoTrees/process/fdm_process_common.json +++ b/resources/profiles/TwoTrees/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "1", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/UltiMaker.json b/resources/profiles/UltiMaker.json index da2b5442a1..52daf03cec 100644 --- a/resources/profiles/UltiMaker.json +++ b/resources/profiles/UltiMaker.json @@ -1,7 +1,7 @@ { "name": "UltiMaker", "url": "", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "UltiMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/UltiMaker/machine/fdm_machine_common.json b/resources/profiles/UltiMaker/machine/fdm_machine_common.json index bcb191c0b1..035efc68ba 100644 --- a/resources/profiles/UltiMaker/machine/fdm_machine_common.json +++ b/resources/profiles/UltiMaker/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "10000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json index 02e0127bef..a71eed1b78 100644 --- a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "4iVomDxutraufw6B", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.12", "max_travel_detour_distance": "0", diff --git a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json index 8c5596cfab..5026572ee8 100644 --- a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "Mo2NUdUehA5y4OwV", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.18", "max_travel_detour_distance": "0", diff --git a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json index 7df1292a9d..bd77f960ac 100644 --- a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json +++ b/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "dBum79P8qUSRgT90", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", diff --git a/resources/profiles/UltiMaker/process/fdm_process_common.json b/resources/profiles/UltiMaker/process/fdm_process_common.json index 99fcd508d0..45c9bcf236 100644 --- a/resources/profiles/UltiMaker/process/fdm_process_common.json +++ b/resources/profiles/UltiMaker/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Vivedino.json b/resources/profiles/Vivedino.json index bd7228a295..c8f6b65c3e 100644 --- a/resources/profiles/Vivedino.json +++ b/resources/profiles/Vivedino.json @@ -1,6 +1,6 @@ { "name": "Vivedino", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Vivedino configurations", "machine_model_list": [ diff --git a/resources/profiles/Vivedino/machine/fdm_klipper_common.json b/resources/profiles/Vivedino/machine/fdm_klipper_common.json index 23bfda64f1..3712765b66 100644 --- a/resources/profiles/Vivedino/machine/fdm_klipper_common.json +++ b/resources/profiles/Vivedino/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ diff --git a/resources/profiles/Vivedino/machine/fdm_machine_common.json b/resources/profiles/Vivedino/machine/fdm_machine_common.json index 3c5f92be16..7b8f13e442 100644 --- a/resources/profiles/Vivedino/machine/fdm_machine_common.json +++ b/resources/profiles/Vivedino/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Vivedino/machine/fdm_rrf_common.json b/resources/profiles/Vivedino/machine/fdm_rrf_common.json index b639ec3fd7..08fd49e3ad 100644 --- a/resources/profiles/Vivedino/machine/fdm_rrf_common.json +++ b/resources/profiles/Vivedino/machine/fdm_rrf_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE\n", diff --git a/resources/profiles/Vivedino/process/fdm_process_common.json b/resources/profiles/Vivedino/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Vivedino/process/fdm_process_common.json +++ b/resources/profiles/Vivedino/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json index 9736bc5c0d..a10193f25a 100644 --- a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json +++ b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Volumic.json b/resources/profiles/Volumic.json index af7aa294bc..7923f2d92f 100644 --- a/resources/profiles/Volumic.json +++ b/resources/profiles/Volumic.json @@ -1,6 +1,6 @@ { "name": "Volumic", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "1", "description": "VOLUMIC configurations", "machine_model_list": [ diff --git a/resources/profiles/Volumic/machine/EXO42 IDRE.json b/resources/profiles/Volumic/machine/EXO42 IDRE.json index ad6ad5ba44..185924e798 100644 --- a/resources/profiles/Volumic/machine/EXO42 IDRE.json +++ b/resources/profiles/Volumic/machine/EXO42 IDRE.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "EXO42_bed.STL", - "default_materials": "Volumic PLA Ultra" + "default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/EXO42 Performance.json b/resources/profiles/Volumic/machine/EXO42 Performance.json index 14979aca7c..0ae9738e0e 100644 --- a/resources/profiles/Volumic/machine/EXO42 Performance.json +++ b/resources/profiles/Volumic/machine/EXO42 Performance.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "EXO42_bed.STL", - "default_materials": "Volumic PLA Ultra" + "default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/EXO65 IDRE.json b/resources/profiles/Volumic/machine/EXO65 IDRE.json index 4d6060a134..3532466902 100644 --- a/resources/profiles/Volumic/machine/EXO65 IDRE.json +++ b/resources/profiles/Volumic/machine/EXO65 IDRE.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "EXO65_bed.STL", - "default_materials": "Volumic PLA Ultra" + "default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/EXO65 Performance.json b/resources/profiles/Volumic/machine/EXO65 Performance.json index c34582d5f0..4e1ffaa2b0 100644 --- a/resources/profiles/Volumic/machine/EXO65 Performance.json +++ b/resources/profiles/Volumic/machine/EXO65 Performance.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "EXO65_bed.STL", - "default_materials": "Volumic PLA Ultra" + "default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/SH65 IDRE.json b/resources/profiles/Volumic/machine/SH65 IDRE.json index ee9d97b97f..79c2fee79c 100644 --- a/resources/profiles/Volumic/machine/SH65 IDRE.json +++ b/resources/profiles/Volumic/machine/SH65 IDRE.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "SH65_bed.STL", - "default_materials": "Volumic PLA Ultra" + "default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/SH65 Performance.json b/resources/profiles/Volumic/machine/SH65 Performance.json index b5e4eb2bf0..4091b52b93 100644 --- a/resources/profiles/Volumic/machine/SH65 Performance.json +++ b/resources/profiles/Volumic/machine/SH65 Performance.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "SH65_bed.STL", - "default_materials": "Volumic PLA Ultra" + "default_materials": "Volumic PLA Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/VS30SC2 Performance.json b/resources/profiles/Volumic/machine/VS30SC2 Performance.json index 93f1ac8c28..74fa8c1fc8 100644 --- a/resources/profiles/Volumic/machine/VS30SC2 Performance.json +++ b/resources/profiles/Volumic/machine/VS30SC2 Performance.json @@ -6,5 +6,5 @@ "machine_tech": "FFF", "family": "VOLUMIC", "bed_model": "VS30U_bed.STL", - "default_materials": "Volumic UNIVERSAL Ultra" + "default_materials": "Volumic UNIVERSAL Ultra;Volumic PLA Ultra (Performance)" } diff --git a/resources/profiles/Volumic/machine/fdm_volumic_common.json b/resources/profiles/Volumic/machine/fdm_volumic_common.json index a0f8a16b48..59a9facfde 100644 --- a/resources/profiles/Volumic/machine/fdm_volumic_common.json +++ b/resources/profiles/Volumic/machine/fdm_volumic_common.json @@ -31,7 +31,6 @@ "retraction_speed": [ "30" ], - "silent_mode": "0", "machine_max_acceleration_e": [ "0", "0" diff --git a/resources/profiles/Volumic/process/fdm_process_volumic_common.json b/resources/profiles/Volumic/process/fdm_process_volumic_common.json index 52dfcb1eb8..5a7ff0840a 100644 --- a/resources/profiles/Volumic/process/fdm_process_volumic_common.json +++ b/resources/profiles/Volumic/process/fdm_process_volumic_common.json @@ -5,7 +5,6 @@ "instantiation": "false", "precise_outer_wall": "1", "enable_overhang_speed": "1", - "adaptive_layer_height": "0", "reduce_crossing_wall": "1", "max_travel_detour_distance": "0", "extra_perimeters_on_overhangs": "1", diff --git a/resources/profiles/Voron.json b/resources/profiles/Voron.json index 74df754a9d..9f6f785ad7 100644 --- a/resources/profiles/Voron.json +++ b/resources/profiles/Voron.json @@ -1,6 +1,6 @@ { "name": "Voron", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Voron configurations", "machine_model_list": [ diff --git a/resources/profiles/Voron/machine/fdm_klipper_common.json b/resources/profiles/Voron/machine/fdm_klipper_common.json index b4ffd1a4bb..4eedd71412 100644 --- a/resources/profiles/Voron/machine/fdm_klipper_common.json +++ b/resources/profiles/Voron/machine/fdm_klipper_common.json @@ -117,7 +117,6 @@ "30" ], "z_hop_types": "Slope Lift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Voron/machine/fdm_machine_common.json b/resources/profiles/Voron/machine/fdm_machine_common.json index 921560eee8..f7f0f31d7e 100644 --- a/resources/profiles/Voron/machine/fdm_machine_common.json +++ b/resources/profiles/Voron/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Voron/process/fdm_process_common.json b/resources/profiles/Voron/process/fdm_process_common.json index d8955e2bfb..c118c4a2c9 100644 --- a/resources/profiles/Voron/process/fdm_process_common.json +++ b/resources/profiles/Voron/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Voron/process/fdm_process_voron_common.json b/resources/profiles/Voron/process/fdm_process_voron_common.json index f5ad2128d0..d06e0e7e9a 100644 --- a/resources/profiles/Voron/process/fdm_process_voron_common.json +++ b/resources/profiles/Voron/process/fdm_process_voron_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Voxelab.json b/resources/profiles/Voxelab.json index 758b9d0cd3..6d1fa00061 100644 --- a/resources/profiles/Voxelab.json +++ b/resources/profiles/Voxelab.json @@ -1,7 +1,7 @@ { "name": "Voxelab", "url": "", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Voxelab configurations", "machine_model_list": [ diff --git a/resources/profiles/Voxelab/machine/fdm_machine_common.json b/resources/profiles/Voxelab/machine/fdm_machine_common.json index b4aada4829..a2c7c89e17 100644 --- a/resources/profiles/Voxelab/machine/fdm_machine_common.json +++ b/resources/profiles/Voxelab/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_start_gcode": "", diff --git a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json index f595e8b16b..29a42d75ec 100644 --- a/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.16mm Optimal @Voxelab AquilaX2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "xCSbqEmBX0IB51ZS", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.16", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json index 97d049eb14..ec6f76816d 100644 --- a/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json +++ b/resources/profiles/Voxelab/process/0.20mm Standard @Voxelab AquilaX2.json @@ -5,7 +5,6 @@ "from": "system", "setting_id": "DbIfKn2knpsOQT7H", "instantiation": "true", - "adaptive_layer_height": "1", "reduce_crossing_wall": "0", "layer_height": "0.2", "max_travel_detour_distance": "0", diff --git a/resources/profiles/Voxelab/process/fdm_process_common.json b/resources/profiles/Voxelab/process/fdm_process_common.json index 99fcd508d0..45c9bcf236 100644 --- a/resources/profiles/Voxelab/process/fdm_process_common.json +++ b/resources/profiles/Voxelab/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Vzbot.json b/resources/profiles/Vzbot.json index bcefdaf26c..a64b4807e8 100644 --- a/resources/profiles/Vzbot.json +++ b/resources/profiles/Vzbot.json @@ -1,6 +1,6 @@ { "name": "Vzbot", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Vzbot configurations", "machine_model_list": [ diff --git a/resources/profiles/Vzbot/machine/fdm_klipper_common.json b/resources/profiles/Vzbot/machine/fdm_klipper_common.json index 97e546f272..26bac7d0f3 100644 --- a/resources/profiles/Vzbot/machine/fdm_klipper_common.json +++ b/resources/profiles/Vzbot/machine/fdm_klipper_common.json @@ -116,8 +116,6 @@ "deretraction_speed": [ "80" ], - "z_lift_type": "NormalLift", - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "PAUSE\n", diff --git a/resources/profiles/Vzbot/machine/fdm_machine_common.json b/resources/profiles/Vzbot/machine/fdm_machine_common.json index 7c66fd5988..407e718f94 100644 --- a/resources/profiles/Vzbot/machine/fdm_machine_common.json +++ b/resources/profiles/Vzbot/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json index dc8a25695d..de407b2612 100644 --- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json +++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json index 110151e4f8..f5b58f9df2 100644 --- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json +++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.5_nozzle.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common_0.5_nozzle", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json index 7375f8d03f..3d0a6667be 100644 --- a/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json +++ b/resources/profiles/Vzbot/process/fdm_process_Vzbot_common_0.6_nozzle.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common_0.6_nozzle", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/Vzbot/process/fdm_process_common.json b/resources/profiles/Vzbot/process/fdm_process_common.json index d8955e2bfb..c118c4a2c9 100644 --- a/resources/profiles/Vzbot/process/fdm_process_common.json +++ b/resources/profiles/Vzbot/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json index d07534d8b5..30b508b5ad 100644 --- a/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json +++ b/resources/profiles/Vzbot/process/fdm_process_common_0.5_nozzle.json @@ -3,7 +3,6 @@ "name": "fdm_process_common_0.5_nozzle", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "150", diff --git a/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json b/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json index 8d0c3ec113..f61615dd8c 100644 --- a/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json +++ b/resources/profiles/Vzbot/process/fdm_process_common_0.6_nozzle.json @@ -3,7 +3,6 @@ "name": "fdm_process_common_0.6_nozzle", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "150", diff --git a/resources/profiles/WEMAKE3D.json b/resources/profiles/WEMAKE3D.json index 399d342641..feeeba132b 100644 --- a/resources/profiles/WEMAKE3D.json +++ b/resources/profiles/WEMAKE3D.json @@ -1,6 +1,6 @@ { "name": "WEMAKE3D", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "WEMAKE3D configurations", "machine_model_list": [ diff --git a/resources/profiles/WEMAKE3D/process/fdm_process_common.json b/resources/profiles/WEMAKE3D/process/fdm_process_common.json index 3708fca48b..1dc5f32da4 100644 --- a/resources/profiles/WEMAKE3D/process/fdm_process_common.json +++ b/resources/profiles/WEMAKE3D/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -92,7 +91,6 @@ "support_top_z_distance": "0.275", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/Wanhao France.json b/resources/profiles/Wanhao France.json index ce18d5c5d0..9087899761 100644 --- a/resources/profiles/Wanhao France.json +++ b/resources/profiles/Wanhao France.json @@ -1,6 +1,6 @@ { "name": "Wanhao France", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "Wanhao France D12 configurations", "machine_model_list": [ diff --git a/resources/profiles/Wanhao France/filament/YUMI PETG.json b/resources/profiles/Wanhao France/filament/YUMI PETG.json index 9d1bf0288a..7495416e39 100644 --- a/resources/profiles/Wanhao France/filament/YUMI PETG.json +++ b/resources/profiles/Wanhao France/filament/YUMI PETG.json @@ -108,9 +108,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "42" - ], "filament_loading_speed": [ "0" ], @@ -180,9 +177,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "0" ], diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json index b15cecc588..366c7b8ad8 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json @@ -8,7 +8,7 @@ "printer_model": "D12 230 PRO SMARTPAD DIRECT", "default_print_profile": "0.20mm Standard @Wanhao-D12-230", "default_filament_profile": [ - "Direct Drive" + "YUMI PLA Direct Drive" ], "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nTIMELAPSE_TAKE_FRAME\nG92 E0", "change_filament_gcode": "M600", diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json index 88fc2fa519..f7308b5838 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json @@ -26,7 +26,7 @@ "auxiliary_fan": "0", "printer_variant": "0.4", "default_filament_profile": [ - "Direct Drive" + "YUMI PLA Direct Drive" ], "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0", "change_filament_gcode": "M600", diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json index 5795ec87f1..81e3bfe34b 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json @@ -22,7 +22,7 @@ "auxiliary_fan": "0", "printer_variant": "0.4", "default_filament_profile": [ - "Direct Drive" + "YUMI PLA Direct Drive" ], "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nTIMELAPSE_TAKE_FRAME\nG92 E0", "change_filament_gcode": "M600", diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json index d49638c216..916c24cef6 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json @@ -22,7 +22,7 @@ "auxiliary_fan": "0", "printer_variant": "0.4", "default_filament_profile": [ - "Direct Drive" + "YUMI PLA Direct Drive" ], "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0", "change_filament_gcode": "M600", diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json index 4b41bbee33..d79e811b91 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json @@ -22,7 +22,7 @@ "auxiliary_fan": "0", "printer_variant": "0.4", "default_filament_profile": [ - "Direct Drive" + "YUMI PLA Direct Drive" ], "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nLOG_Z\nTIMELAPSE_TAKE_FRAME\nG92 E0", "change_filament_gcode": "M600", diff --git a/resources/profiles/Wanhao France/machine/fdm_machine_common.json b/resources/profiles/Wanhao France/machine/fdm_machine_common.json index 38881092e1..e72b821fa1 100644 --- a/resources/profiles/Wanhao France/machine/fdm_machine_common.json +++ b/resources/profiles/Wanhao France/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "support_chamber_temp_control": "0", "support_air_filtration": "0", "machine_max_acceleration_e": [ diff --git a/resources/profiles/Wanhao France/process/fdm_process_common.json b/resources/profiles/Wanhao France/process/fdm_process_common.json index fb15ba32dd..ce18f8a69a 100644 --- a/resources/profiles/Wanhao France/process/fdm_process_common.json +++ b/resources/profiles/Wanhao France/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Wanhao.json b/resources/profiles/Wanhao.json index d534a75d8b..81afe3eff5 100644 --- a/resources/profiles/Wanhao.json +++ b/resources/profiles/Wanhao.json @@ -1,6 +1,6 @@ { "name": "Wanhao", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "Wanhao configurations", "machine_model_list": [ diff --git a/resources/profiles/Wanhao/machine/fdm_machine_common.json b/resources/profiles/Wanhao/machine/fdm_machine_common.json index 20d52ddf93..654d066697 100644 --- a/resources/profiles/Wanhao/machine/fdm_machine_common.json +++ b/resources/profiles/Wanhao/machine/fdm_machine_common.json @@ -14,7 +14,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -110,7 +109,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up", "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end" diff --git a/resources/profiles/Wanhao/machine/fdm_wanhao_common.json b/resources/profiles/Wanhao/machine/fdm_wanhao_common.json index 90c105b44d..0b8e77b013 100644 --- a/resources/profiles/Wanhao/machine/fdm_wanhao_common.json +++ b/resources/profiles/Wanhao/machine/fdm_wanhao_common.json @@ -116,7 +116,6 @@ "deretraction_speed": [ "40" ], - "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Wanhao/process/fdm_process_common.json b/resources/profiles/Wanhao/process/fdm_process_common.json index a3fe34bea4..d7da41458a 100644 --- a/resources/profiles/Wanhao/process/fdm_process_common.json +++ b/resources/profiles/Wanhao/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", diff --git a/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json b/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json index f3ec727575..d8b026f624 100644 --- a/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json +++ b/resources/profiles/Wanhao/process/fdm_process_wanhao_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", diff --git a/resources/profiles/WonderMaker.json b/resources/profiles/WonderMaker.json index 0eeffdb045..35a1b5c8fa 100755 --- a/resources/profiles/WonderMaker.json +++ b/resources/profiles/WonderMaker.json @@ -1,7 +1,7 @@ { "name": "WonderMaker", "url": "", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "WonderMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/WonderMaker/machine/fdm_machine_common.json b/resources/profiles/WonderMaker/machine/fdm_machine_common.json index 6e812d4a1a..3fc194fe33 100755 --- a/resources/profiles/WonderMaker/machine/fdm_machine_common.json +++ b/resources/profiles/WonderMaker/machine/fdm_machine_common.json @@ -20,7 +20,6 @@ "0x0" ], "gcode_flavor": "klipper", - "silent_mode": "0", "long_retractions_when_cut": [ "0" ], diff --git a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json index 0b113f9f01..231a6d61b5 100755 --- a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.2 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json index 27b1b48eca..400c52194c 100755 --- a/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.06mm Fine @WonderMaker ZR Ultra 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json index 7b393336df..840a438931 100755 --- a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json +++ b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR Ultra.json @@ -6,8 +6,6 @@ "setting_id": "S9bZmEeAYQKyQW6v", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json index 1f4a7fed3b..51c704a726 100755 --- a/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json +++ b/resources/profiles/WonderMaker/process/0.08mm Extra Fine @WonderMaker ZR.json @@ -6,8 +6,6 @@ "setting_id": "MDzBBVuT9evcSDUx", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.4 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json index 4713c9c6ef..1e32bc43f8 100755 --- a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.2 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json index 422b17646b..b2e1739b53 100755 --- a/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.08mm Optimal @WonderMaker ZR Ultra 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json index 1c298bcab0..d8db56e028 100755 --- a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.2 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json index eeddb0e9f8..f83e6254f7 100755 --- a/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json index a1275857de..954e3ae8ed 100755 --- a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.2 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json index f9a1aedca2..7f4a704c05 100755 --- a/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.12mm Draft @WonderMaker ZR Ultra 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json index f270e60327..a5b2aa0d55 100755 --- a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json +++ b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR Ultra.json @@ -6,8 +6,6 @@ "setting_id": "bSzDzVfhYbOfsvrm", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json index 1e0fd84bfd..cb96ef20a9 100755 --- a/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json +++ b/resources/profiles/WonderMaker/process/0.12mm Fine @WonderMaker ZR.json @@ -6,8 +6,6 @@ "setting_id": "RNjDYmMvSgIjaGUB", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.4 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json index 5c24551f11..9fb20debdd 100755 --- a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.2 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json index d10132d333..3eb2a453ff 100755 --- a/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.14mm Extra Draft @WonderMaker ZR Ultra 0.2 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json index 49e6dee9e5..33adc94625 100755 --- a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json +++ b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR Ultra.json @@ -6,8 +6,6 @@ "setting_id": "CJRH0KVoqMhAKf7b", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json index d6837e19f2..fef4b0de51 100755 --- a/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json +++ b/resources/profiles/WonderMaker/process/0.16mm Optimal @WonderMaker ZR.json @@ -6,8 +6,6 @@ "setting_id": "Gq8p7VLck61epJRQ", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.4 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json index 5ac88d7e8c..97c2009db6 100755 --- a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.6 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json index b3c7bc33da..82699880de 100755 --- a/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.18mm Fine @WonderMaker ZR Ultra 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json index 88320865b2..0655aa9194 100755 --- a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json +++ b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR Ultra.json @@ -6,8 +6,6 @@ "setting_id": "5UnvGUSJUfxiX3Oh", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json index da46084462..fcfeabbcd9 100755 --- a/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json +++ b/resources/profiles/WonderMaker/process/0.20mm Standard @WonderMaker ZR.json @@ -6,8 +6,6 @@ "setting_id": "nalI7H3j0Qhs6qig", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.4 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json index 0c33e1a7f1..0463b259bd 100755 --- a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json +++ b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR Ultra.json @@ -6,8 +6,6 @@ "setting_id": "hSxtB6qUwhhTkAtv", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json index f0b4ba5369..f56e519bef 100755 --- a/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json +++ b/resources/profiles/WonderMaker/process/0.24mm Draft @WonderMaker ZR.json @@ -6,8 +6,6 @@ "setting_id": "ptoXhTDH4PGy8H4w", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.4 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json index 0808b7056e..764c717695 100755 --- a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.8 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json index 433cc33740..70a708ba46 100755 --- a/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.24mm Fine @WonderMaker ZR Ultra 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json index ec5029b95a..b21d155153 100755 --- a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.6 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json index e31b67eb36..f9667fface 100755 --- a/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.24mm Optimal @WonderMaker ZR Ultra 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json index 52b01c70c4..1785ba49f5 100755 --- a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json +++ b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR Ultra.json @@ -6,8 +6,6 @@ "setting_id": "sGfFFynEl5ot8fzq", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json index 3c61b187bf..e598576f17 100755 --- a/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json +++ b/resources/profiles/WonderMaker/process/0.28mm Extra Draft @WonderMaker ZR.json @@ -6,8 +6,6 @@ "setting_id": "cns9NtEbZzQRnUOq", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.4 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json index 3818aa0c7f..45bc88f11c 100755 --- a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.6 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json index 35257448ee..749427287a 100755 --- a/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json index 01040bc97d..5117bec5c7 100755 --- a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.8 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json index 9387e0bd31..650f2b16bd 100755 --- a/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.32mm Optimal @WonderMaker ZR Ultra 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json index 32e8d231a0..5da20d13fe 100755 --- a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.6 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json index aec25c67cd..c5d787805f 100755 --- a/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.36mm Draft @WonderMaker ZR Ultra 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json index 9e040a39f7..178371f567 100755 --- a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.8 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json index 1e5fbadf5a..b05bad45c8 100755 --- a/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json index 23b41cff0f..3de31e9320 100755 --- a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.6 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json index 0499dd48ff..cfce9cde18 100755 --- a/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.42mm Extra Draft @WonderMaker ZR Ultra 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json index b2d1696c4f..37089b0318 100755 --- a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.8 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json index 526dd3db7d..93311ca1d2 100755 --- a/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.48mm Draft @WonderMaker ZR Ultra 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json index 399b583429..5ffbf26b77 100755 --- a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "WonderMaker ZR 0.8 nozzle" ] diff --git a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json index 4708bbfed9..f5b2d333a9 100755 --- a/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/process/0.56mm Extra Draft @WonderMaker ZR Ultra 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "ooze_prevention": "1", "preheat_time": "30", "standby_temperature_delta": "-80", diff --git a/resources/profiles/WonderMaker/process/fdm_process_common.json b/resources/profiles/WonderMaker/process/fdm_process_common.json index ba67f8406c..a9d67585ce 100755 --- a/resources/profiles/WonderMaker/process/fdm_process_common.json +++ b/resources/profiles/WonderMaker/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "bridge_speed": "25", @@ -69,7 +68,5 @@ "xy_hole_compensation": "0", "xy_contour_compensation": "0", "compatible_printers": [], - "smooth_coefficient": "80", - "overhang_totally_speed": "19", "scarf_angle_threshold": "155" } diff --git a/resources/profiles/WonderMaker/process/fdm_process_wm_common.json b/resources/profiles/WonderMaker/process/fdm_process_wm_common.json index 3b7fb2ba74..72e8a815a2 100755 --- a/resources/profiles/WonderMaker/process/fdm_process_wm_common.json +++ b/resources/profiles/WonderMaker/process/fdm_process_wm_common.json @@ -20,7 +20,6 @@ "inner_wall_acceleration": "8000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_speed": "30", diff --git a/resources/profiles/Z-Bolt.json b/resources/profiles/Z-Bolt.json index aa092cc8b2..7c16785c62 100644 --- a/resources/profiles/Z-Bolt.json +++ b/resources/profiles/Z-Bolt.json @@ -1,7 +1,7 @@ { "name": "Z-Bolt", "url": "", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Z-Bolt configurations", "machine_model_list": [ diff --git a/resources/profiles/Z-Bolt/machine/fdm_machine_common.json b/resources/profiles/Z-Bolt/machine/fdm_machine_common.json index 2a5cddb2f2..e9350c430c 100644 --- a/resources/profiles/Z-Bolt/machine/fdm_machine_common.json +++ b/resources/profiles/Z-Bolt/machine/fdm_machine_common.json @@ -19,7 +19,6 @@ "0x0" ], "gcode_flavor": "marlin", - "silent_mode": "0", "machine_max_acceleration_e": [ "5000" ], @@ -111,7 +110,6 @@ "wipe": [ "1" ], - "z_lift_type": "NormalLift", "default_print_profile": "", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_BEFORE_LAYER_CHANGE", "layer_change_gcode": "_AFTER_LAYER_CHANGE Z={layer_z}", diff --git a/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json index 52e9dae00d..fa724bd573 100644 --- a/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.08mm Extra Fine @Z-Bolt 0.4 nozzle.json @@ -7,8 +7,6 @@ "setting_id": "aQbSyiYUXanu2sjX", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json index c71a6ae5ef..8535207de5 100644 --- a/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.08mm High Quality @Z-Bolt 0.4 nozzle.json @@ -16,8 +16,6 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "150", "top_surface_speed": "150", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json index 74108d7eb6..4cd386a5a9 100644 --- a/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.12mm Fine @Z-Bolt 0.4 nozzle.json @@ -7,8 +7,6 @@ "setting_id": "FXUuYzz6QKb2B8NO", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json index b7faeba25f..f79c91e16c 100644 --- a/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.12mm High Quality @Z-Bolt 0.4 nozzle.json @@ -16,8 +16,6 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "180", "top_surface_speed": "150", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json index 06b6c23e34..72b2a62857 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.4 nozzle.json @@ -16,8 +16,6 @@ "sparse_infill_pattern": "gyroid", "sparse_infill_speed": "200", "top_surface_speed": "150", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json index e826d762af..036b2ae886 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm High Quality @Z-Bolt 0.6 nozzle.json @@ -12,8 +12,6 @@ "top_surface_speed": "100", "default_acceleration": "5000", "outer_wall_acceleration": "2500", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json index ccd2dbcd33..7f375e45f5 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm Optimal @Z-Bolt 0.4 nozzle.json @@ -7,8 +7,6 @@ "setting_id": "TrwuaRthXrp9Aqc2", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json index 62e3e30a66..831f6dabdd 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt 0.6 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json index a2651b61b8..4d70dc3505 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S300 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json index 7dceacb4d0..058a3a870c 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S400 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json index db42d946e5..977400fb28 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S600 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json index 053a3b9593..15405feb72 100644 --- a/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.16mm Standard @Z-Bolt S800 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json index d926fede96..df9e3494fd 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm High Quality @Z-Bolt 0.6 nozzle.json @@ -13,8 +13,6 @@ "top_surface_speed": "100", "default_acceleration": "5000", "outer_wall_acceleration": "2500", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json index e10958dbfe..740f23349e 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.4 nozzle.json @@ -7,8 +7,6 @@ "setting_id": "jSA9QDV6RfL4eb5X", "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json index 92e55765eb..b5ccd2ba7a 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt 0.6 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json index 97f40201d2..43f9ea536b 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S300 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json index 6366647a6f..641a53bd80 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S400 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json index 7b31b4afbb..2843e854cb 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S600 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json index 27808d012c..37ddf5b15d 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Standard @Z-Bolt S800 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json index 177a7d1f87..ab0077d73a 100644 --- a/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.20mm Strength @Z-Bolt 0.4 nozzle.json @@ -9,8 +9,6 @@ "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", "outer_wall_speed": "60", "sparse_infill_density": "25%", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "wall_loops": "6", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json index 358ae59e06..9505267903 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Draft @Z-Bolt 0.4 nozzle.json @@ -7,8 +7,6 @@ "setting_id": "L1bdHzIO1OKLDT3Q", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json index 5ef55f74f5..627d9ea582 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.6 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json index dad1890533..f16cccf104 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt 0.8 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json index fce0f0dc27..e646fce399 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json index 1f84b54785..9d8d457f31 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S300 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json index fe57ad2149..b304c7d305 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json index c1a1f9d3ba..ad2726dc6a 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S400 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.8 nozzle", "Z-Bolt S400 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json index e12643bd2a..5780b16d09 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json index 962ba3a32a..f4f133b107 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S600 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.8 nozzle", "Z-Bolt S600 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json index 8ba32b08b9..9ea1286a91 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json index 7ff2da7c2d..309d3ea585 100644 --- a/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.24mm Standard @Z-Bolt S800 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.8 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json index f442650a69..3304756c78 100644 --- a/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.28mm Extra Draft @Z-Bolt 0.4 nozzle.json @@ -7,8 +7,6 @@ "setting_id": "U6WOuHSZoT8XksE5", "instantiation": "true", "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.4 nozzle", "Z-Bolt S300 Dual 0.4 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json index 006f1c4d0a..0d00b00d51 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt 0.6 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json index 5bc3a498b3..b040598949 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S300 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json index 6984af380f..611ec1a723 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S400 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json index 6df85166a4..34e6b16951 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S600 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json index 5add162efc..219a9150dc 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Standard @Z-Bolt S800 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json index 8fea281789..14c5183ddb 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt 0.6 nozzle.json @@ -10,8 +10,6 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json index 127c42f19c..aed5e54271 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S300 0.6 nozzle.json @@ -9,8 +9,6 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json index d03ac505d5..67525a87b8 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S400 0.6 nozzle.json @@ -9,8 +9,6 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json index 14dcc0f4ee..01745da5e5 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S600 0.6 nozzle.json @@ -9,8 +9,6 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json index 9dd0eb0728..a03c875c2a 100644 --- a/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.30mm Strength @Z-Bolt S800 0.6 nozzle.json @@ -9,8 +9,6 @@ "elefant_foot_compensation": "0.15", "sparse_infill_density": "25%", "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json index 7a8f7ea2e9..8587bb3e67 100644 --- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt 0.8 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json index e639b6b277..f36ba77e24 100644 --- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S300 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json index dc7e570d65..0ad0f9371a 100644 --- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S400 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.8 nozzle", "Z-Bolt S400 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json index e7a77f55a1..f449cfd705 100644 --- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S600 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.8 nozzle", "Z-Bolt S600 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json index 7fe7708930..7732bb1c18 100644 --- a/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.32mm Standard @Z-Bolt S800 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.8 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json index 236979d112..8f5029d11d 100644 --- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt 0.6 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json index 32ec85d70d..d782d7d919 100644 --- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S300 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json index 5f0e926991..a196f43fea 100644 --- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S400 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json index e58fecfbe1..42f2d6defc 100644 --- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S600 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json index 3d2af55bd0..e06c917d53 100644 --- a/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.36mm Standard @Z-Bolt S800 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json index b8c39f25b3..652815aeb7 100644 --- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt 0.8 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json index bacba10332..b00f4442af 100644 --- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S300 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json index 1234ff53d8..103dd99e63 100644 --- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S400 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.8 nozzle", "Z-Bolt S400 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json index 6b05db5f96..30f9ef5ff1 100644 --- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S600 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.8 nozzle", "Z-Bolt S600 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json index 0d0475e7d9..57a59eb902 100644 --- a/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.40mm Standard @Z-Bolt S800 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.8 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json index ccaab4f070..b64b0028f9 100644 --- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt 0.6 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json index 9a5e4b5aa5..87f866d958 100644 --- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S300 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.6 nozzle", "Z-Bolt S300 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json index c84e8895c0..c82284df22 100644 --- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S400 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.6 nozzle", "Z-Bolt S400 Dual 0.6 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json index 20f0a155e3..110605f717 100644 --- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S600 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.6 nozzle", "Z-Bolt S600 Dual 0.6 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json index ed319c209f..c042b0bea2 100644 --- a/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.42mm Standard @Z-Bolt S800 0.6 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.6 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json index b26b749a81..c67e1d42fa 100644 --- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt 0.8 nozzle.json @@ -8,8 +8,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json index 42ddc4ff8d..c1d19c312e 100644 --- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S300 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S300 0.8 nozzle", "Z-Bolt S300 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json index 916e7a28e6..efed7665fe 100644 --- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S400 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S400 0.8 nozzle", "Z-Bolt S400 Dual 0.8 nozzle" diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json index 32dc534606..49092fb651 100644 --- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S600 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S600 0.8 nozzle", "Z-Bolt S600 Dual 0.8 nozzle", diff --git a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json index 21c660ae18..cdea08b5f2 100644 --- a/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/process/0.48mm Standard @Z-Bolt S800 0.8 nozzle.json @@ -7,8 +7,6 @@ "instantiation": "true", "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", "compatible_printers": [ "Z-Bolt S800 Dual 0.8 nozzle" ] diff --git a/resources/profiles/Z-Bolt/process/fdm_process_common.json b/resources/profiles/Z-Bolt/process/fdm_process_common.json index 4859096b3d..a685416c9b 100644 --- a/resources/profiles/Z-Bolt/process/fdm_process_common.json +++ b/resources/profiles/Z-Bolt/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "bridge_flow": "0.95", "bridge_no_support": "0", "bridge_speed": "25", @@ -41,7 +40,6 @@ "internal_solid_infill_speed": "40", "outer_wall_line_width": "0.42", "outer_wall_speed": "120", - "overhang_totally_speed": "19", "print_sequence": "by layer", "spiral_mode": "0", "standby_temperature_delta": "-5", @@ -70,6 +68,5 @@ "xy_hole_compensation": "0", "xy_contour_compensation": "0", "compatible_printers": [], - "smooth_coefficient": "80", "scarf_angle_threshold": "155" } diff --git a/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json b/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json index 627ed0f9f9..dd205e9370 100644 --- a/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json +++ b/resources/profiles/Z-Bolt/process/fdm_process_zbolt_common.json @@ -17,7 +17,6 @@ "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", - "internal_bridge_support_thickness": "0.8", "initial_layer_acceleration": "500", "initial_layer_line_width": "0.5", "initial_layer_speed": "30", diff --git a/resources/profiles/iQ.json b/resources/profiles/iQ.json index 4b1f83b354..1148b112f3 100644 --- a/resources/profiles/iQ.json +++ b/resources/profiles/iQ.json @@ -1,6 +1,6 @@ { "name": "innovatiQ", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "1", "description": "innovatiQ configuration", "machine_model_list": [ diff --git a/resources/profiles/iQ/filament/fdm_filament_common.json b/resources/profiles/iQ/filament/fdm_filament_common.json index 4bf9b7986c..5d8d059f91 100644 --- a/resources/profiles/iQ/filament/fdm_filament_common.json +++ b/resources/profiles/iQ/filament/fdm_filament_common.json @@ -84,9 +84,6 @@ "filament_is_support": [ "0" ], - "filament_load_time": [ - "0" - ], "filament_loading_speed": [ "28" ], @@ -153,9 +150,6 @@ "filament_toolchange_delay": [ "0" ], - "filament_unload_time": [ - "0" - ], "filament_unloading_speed": [ "90" ], diff --git a/resources/profiles/iQ/machine/TiQ2.json b/resources/profiles/iQ/machine/TiQ2.json index 36c04edf6e..3a24cd308a 100644 --- a/resources/profiles/iQ/machine/TiQ2.json +++ b/resources/profiles/iQ/machine/TiQ2.json @@ -7,5 +7,5 @@ "family": "TiQ", "bed_model": "TiQ2.stl", "bed_texture": "TiQ2_texture.svg", - "default_materials": "Fiberthree PACF Pro P1 @iQ TiQ2 0.4 Nozzle" + "default_materials": "Fiberthree PACF Pro P1 @iQ TiQ2 0.4 Nozzle;Generic PLA @System" } diff --git a/resources/profiles/iQ/machine/TiQ8.json b/resources/profiles/iQ/machine/TiQ8.json index 21d9c23413..0243125926 100644 --- a/resources/profiles/iQ/machine/TiQ8.json +++ b/resources/profiles/iQ/machine/TiQ8.json @@ -7,5 +7,5 @@ "family": "TiQ", "bed_model": "TiQ8.stl", "bed_texture": "TiQ8_texture.svg", - "default_materials": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle" + "default_materials": "Material4Print ABS Natur P1 @iQ TiQ8 0.4 Nozzle;Generic PLA @System" } diff --git a/resources/profiles/iQ/machine/fdm_tiq_common.json b/resources/profiles/iQ/machine/fdm_tiq_common.json index 2f1b6b8415..42fda68609 100644 --- a/resources/profiles/iQ/machine/fdm_tiq_common.json +++ b/resources/profiles/iQ/machine/fdm_tiq_common.json @@ -176,7 +176,6 @@ "30" ], "scan_first_layer": "0", - "silent_mode": "0", "single_extruder_multi_material": "0", "support_air_filtration": "1", "support_chamber_temp_control": "1", diff --git a/resources/profiles/iQ/process/fdm_process_tiq_common.json b/resources/profiles/iQ/process/fdm_process_tiq_common.json index 3214a995d5..d89538b598 100644 --- a/resources/profiles/iQ/process/fdm_process_tiq_common.json +++ b/resources/profiles/iQ/process/fdm_process_tiq_common.json @@ -30,7 +30,6 @@ "standby_temperature_delta": "-40", "preheat_time": "30", "preheat_steps": "1", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", @@ -100,7 +99,6 @@ "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", "tree_support_wall_count": "0", - "tree_support_with_infill": "0", "detect_thin_wall": "0", "top_surface_pattern": "monotonicline", "top_shell_thickness": "0.8", diff --git a/resources/profiles/re3D.json b/resources/profiles/re3D.json index 52ad3a3fc5..da34373d47 100644 --- a/resources/profiles/re3D.json +++ b/resources/profiles/re3D.json @@ -1,7 +1,7 @@ { "name": "re3D", "url": "", - "version": "03.00.10", + "version": "03.00.11", "force_update": "0", "description": "re3D configurations", "machine_model_list": [ diff --git a/resources/profiles/re3D/machine/fdm_machine_common.json b/resources/profiles/re3D/machine/fdm_machine_common.json index 736342291d..8c7a63cff5 100644 --- a/resources/profiles/re3D/machine/fdm_machine_common.json +++ b/resources/profiles/re3D/machine/fdm_machine_common.json @@ -4,10 +4,11 @@ "from": "system", "instantiation": "false", "auxiliary_fan": "0", - "bed_exclude_area": ["0x0"], + "bed_exclude_area": [ + "0x0" + ], "family": "re3D", "gcode_flavor": "klipper", "emit_machine_limits_to_gcode": "0", - "silent_mode": "0", "scan_first_layer": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/machine/fgf_re3D_common.json b/resources/profiles/re3D/machine/fgf_re3D_common.json index 3e0e409228..553bd126ee 100644 --- a/resources/profiles/re3D/machine/fgf_re3D_common.json +++ b/resources/profiles/re3D/machine/fgf_re3D_common.json @@ -1,9 +1,9 @@ { "type": "machine", "name": "fgf_re3D_common", + "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", - "inherits": "fdm_machine_common", "gcode_flavor": "klipper", "printer_settings_id": "", "printer_technology": "FFF", @@ -43,7 +43,6 @@ "30" ], "z_hop_types": "Normal Lift", - "silent_mode": "0", "single_extruder_multi_material": "0", "change_filament_gcode": "M600", "machine_pause_gcode": "PAUSE", @@ -60,4 +59,4 @@ "scan_first_layer": "0", "nozzle_type": "undefine", "auxiliary_fan": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/process/fdm_process_common.json b/resources/profiles/re3D/process/fdm_process_common.json index dcd5c826ae..8a8f884b10 100644 --- a/resources/profiles/re3D/process/fdm_process_common.json +++ b/resources/profiles/re3D/process/fdm_process_common.json @@ -3,7 +3,6 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "adaptive_layer_height": "0", "reduce_crossing_wall": "0", "bridge_flow": "0.95", "brim_width": "5", diff --git a/resources/profiles/re3D/process/fdm_process_re3D_common.json b/resources/profiles/re3D/process/fdm_process_re3D_common.json index ea169330f4..d72e984ae1 100644 --- a/resources/profiles/re3D/process/fdm_process_re3D_common.json +++ b/resources/profiles/re3D/process/fdm_process_re3D_common.json @@ -1,88 +1,87 @@ { - "type": "process", - "name": "fdm_process_re3D_common", - "from": "system", - "instantiation": "false", - "inherits": "fdm_process_common", - "adaptive_layer_height": "0", - "reduce_crossing_wall": "1", - "bridge_flow": "0.985", - "brim_width": "8", - "print_sequence": "by layer", - "bridge_no_support": "0", - "elefant_foot_compensation": "0", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "rectilinear", - "infill_combination": "0", - "infill_wall_overlap": "25%", - "detect_overhang_wall": "1", - "reduce_infill_retraction": "0", - "filename_format": "{input_filename_base}.gcode", - "wall_loops": "3", - "wall_generator": "arachne", - "raft_layers": "0", - "seam_position": "nearest", - "skirt_distance": "8", - "skirt_height": "1", - "minimum_sparse_infill_area": "0", - "spiral_mode": "0", - "standby_temperature_delta": "-75", - "enable_support": "1", - "support_filament": "0", - "support_interface_filament": "0", - "support_on_build_plate_only": "0", - "support_interface_loop_pattern": "0", - "support_interface_top_layers": "2", - "support_interface_spacing": "0.05", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2", - "support_threshold_angle": "30", - "support_object_xy_distance": "0.5", - "detect_thin_wall": "0", - "enable_prime_tower": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "brim_object_gap": "0.1", - "compatible_printers_condition": "", - "draft_shield": "disabled", - "enable_arc_fitting": "1", - "wall_infill_order": "inner wall/outer wall/infill", - "infill_direction": "45", - "interface_shells": "0", - "ironing_flow": "10%", - "ironing_spacing": "0.1", - "ironing_type": "no ironing", - "print_settings_id": "fdm_process_re3D_common", - "skirt_loops": "2", - "resolution": "0.0", - "support_type": "normal(auto)", - "support_style": "snug", - "support_interface_bottom_layers": "2", - "tree_support_branch_angle": "45", - "tree_support_wall_count": "0", - "top_surface_pattern": "monotonicline", - "top_shell_layers": "4", - "top_shell_thickness": "0.6", - "wipe_tower_no_sparse_layers": "0", - "precise_outer_wall": "0", - "accel_to_decel_enable": "0", - "prime_volume": "200", - "ooze_prevention": "1", - "preheat_time": "30", - "slow_down_layers": "2", - "small_perimeter_threshold": "10", - "exclude_object": "1", - "compatible_printers": [ - "re3D Gigabot 4 0.4 nozzle", - "re3D Gigabot 4 0.8 nozzle", - "re3D Gigabot 4 XLT 0.4 nozzle", - "re3D Gigabot 4 XLT 0.8 nozzle", - "re3D Terabot 4 0.4 nozzle", - "re3D Terabot 4 0.8 nozzle" - ] + "type": "process", + "name": "fdm_process_re3D_common", + "inherits": "fdm_process_common", + "from": "system", + "instantiation": "false", + "reduce_crossing_wall": "1", + "bridge_flow": "0.985", + "brim_width": "8", + "print_sequence": "by layer", + "bridge_no_support": "0", + "elefant_foot_compensation": "0", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "rectilinear", + "infill_combination": "0", + "infill_wall_overlap": "25%", + "detect_overhang_wall": "1", + "reduce_infill_retraction": "0", + "filename_format": "{input_filename_base}.gcode", + "wall_loops": "3", + "wall_generator": "arachne", + "raft_layers": "0", + "seam_position": "nearest", + "skirt_distance": "8", + "skirt_height": "1", + "minimum_sparse_infill_area": "0", + "spiral_mode": "0", + "standby_temperature_delta": "-75", + "enable_support": "1", + "support_filament": "0", + "support_interface_filament": "0", + "support_on_build_plate_only": "0", + "support_interface_loop_pattern": "0", + "support_interface_top_layers": "2", + "support_interface_spacing": "0.05", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "2", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.5", + "detect_thin_wall": "0", + "enable_prime_tower": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "brim_object_gap": "0.1", + "compatible_printers_condition": "", + "draft_shield": "disabled", + "enable_arc_fitting": "1", + "wall_infill_order": "inner wall/outer wall/infill", + "infill_direction": "45", + "interface_shells": "0", + "ironing_flow": "10%", + "ironing_spacing": "0.1", + "ironing_type": "no ironing", + "print_settings_id": "fdm_process_re3D_common", + "skirt_loops": "2", + "resolution": "0.0", + "support_type": "normal(auto)", + "support_style": "snug", + "support_interface_bottom_layers": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "0", + "top_surface_pattern": "monotonicline", + "top_shell_layers": "4", + "top_shell_thickness": "0.6", + "wipe_tower_no_sparse_layers": "0", + "precise_outer_wall": "0", + "accel_to_decel_enable": "0", + "prime_volume": "200", + "ooze_prevention": "1", + "preheat_time": "30", + "slow_down_layers": "2", + "small_perimeter_threshold": "10", + "exclude_object": "1", + "compatible_printers": [ + "re3D Gigabot 4 0.4 nozzle", + "re3D Gigabot 4 0.8 nozzle", + "re3D Gigabot 4 XLT 0.4 nozzle", + "re3D Gigabot 4 XLT 0.8 nozzle", + "re3D Terabot 4 0.4 nozzle", + "re3D Terabot 4 0.8 nozzle" + ] } diff --git a/resources/profiles/re3D/process/fgf_process_re3D_common.json b/resources/profiles/re3D/process/fgf_process_re3D_common.json index 3258753500..902366c830 100644 --- a/resources/profiles/re3D/process/fgf_process_re3D_common.json +++ b/resources/profiles/re3D/process/fgf_process_re3D_common.json @@ -1,10 +1,9 @@ { "type": "process", "name": "fgf_process_re3D_common", + "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "inherits": "fdm_process_common", - "adaptive_layer_height": "0", "reduce_crossing_wall": "1", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonicline", @@ -112,4 +111,4 @@ "re3D TerabotX 2 0.8 nozzle", "re3D TerabotX 2 1.75 nozzle" ] -} \ No newline at end of file +} diff --git a/scripts/orca_profile_tool.py b/scripts/orca_profile_tool.py index 8c2b4c1854..b889a1bc39 100755 --- a/scripts/orca_profile_tool.py +++ b/scripts/orca_profile_tool.py @@ -24,9 +24,11 @@ options shared by several commands: since the snapshot describes resources/profiles alone After adding, renaming or deleting profile files, run: - normalize -> trim -> update-index -> generate-id -> update-snapshot -> check -Each step feeds the next: normalize writes the "type" update-index files a -profile by, and trim judges against the index update-index is about to rebuild. + normalize -> update-index -> generate-id -> update-snapshot -> check +normalize supplies missing types; update-index registers presets before id +generation. update-snapshot is needed when filament ids or claims change. +Use trim only for deliberate cleanup, previewed with --dry-run: it judges against +the current index and can delete newly added, unindexed presets. Run from anywhere; "python scripts/orca_profile_tool.py --help" repeats this list and "... --help" documents one command in full. @@ -128,6 +130,9 @@ BAMBU_MAP_PATH = os.path.normpath( os.path.join(SCRIPTS_DIR, "..", "resources", "printers", "bambu_filament_ids.json")) OFL = "OrcaFilamentLibrary" +# The validator's data dir, created under resources/profiles by a local run; +# not a vendor bundle, so an unscoped pass leaves it alone. +USER_DIR = "user" # Bambu (BBL) is the only vendor exempt from the setting_id rule: it keeps its # authoritative "G*" cloud ids. No vendor is exempt from the filament_id rule. @@ -146,7 +151,9 @@ PROFILE_TYPES = ("machine_model", "process", "filament", "machine") # Data files that sit under a vendor bundle but are not presets: no name, no type. NON_PROFILE_FILES = {"filaments_color_codes.json", "cli_config.json"} -# Settings dropped from PrintConfig.cpp. Reported by "check --obsolete-keys". +# Mirror PrintConfigDef::handle_legacy's ignore set in PrintConfig.cpp; a test +# checks parity. Used by normalize and check. Active options and +# legacy aliases that the loader migrates do not belong here. OBSOLETE_KEYS = { "acceleration", "scale", "rotate", "duplicate", "duplicate_grid", "bed_size", "print_center", "g0", "wipe_tower_per_color_wipe", @@ -158,10 +165,11 @@ OBSOLETE_KEYS = { "bed_temperature_initial_layer", "can_switch_nozzle_type", "can_add_auxiliary_fan", "extra_flush_volume", "spaghetti_detector", "adaptive_layer_height", "z_hop_type", "z_lift_type", "bed_temperature_difference", "long_retraction_when_cut", - "retraction_distance_when_cut", "extruder_type", "internal_bridge_support_thickness", - "extruder_clearance_max_radius", "top_area_threshold", "reduce_wall_solid_infill", + "retraction_distance_when_cut", "internal_bridge_support_thickness", + "top_area_threshold", "reduce_wall_solid_infill", "filament_load_time", "filament_unload_time", "smooth_coefficient", - "overhang_totally_speed", "silent_mode", "overhang_speed_classic" + "overhang_totally_speed", "silent_mode", "overhang_speed_classic", + "anisotropic_surfaces", } # Keys renamed at some point, whose old and new spellings must never co-exist: @@ -1050,13 +1058,12 @@ def load_available_filament_profiles(profiles_dir, vendor): def check_machine_default_materials(profiles_dir, vendor): """Every default material a machine names must exist, in the bundle or in OFL. - Returns (errors, warnings); the warning is the bundle having no machine/ at all. + Returns (errors, warnings); a bundle with no machine/ has nothing to check. """ error_count = 0 machine_dir = Path(profiles_dir) / vendor / "machine" if not machine_dir.exists(): - print_warning(f"No machine profiles found for vendor: {vendor}") - return 0, 1 + return 0, 0 available = (load_available_filament_profiles(profiles_dir, vendor) | load_available_filament_profiles(profiles_dir, OFL)) @@ -1246,7 +1253,7 @@ def check_filament_id_length(profiles_dir, vendor): def check_obsolete_keys(profiles_dir, vendor): - """Warn about settings PrintConfig.cpp no longer defines. Returns the count.""" + """Warn about settings PrintConfig.cpp explicitly discards. Returns the count.""" warn_count = 0 profiles_path = Path(profiles_dir) vendor_path = profiles_path / vendor / "filament" @@ -1397,16 +1404,17 @@ def check_normalized(profiles_dir, vendor): # check # --------------------------------------------------------------------------- -def check_profiles(profiles_dir=PROFILES_DIR, vendors=None, snapshot_path=SNAPSHOT_PATH, - materials=False, obsolete_keys=False): +def check_profiles(profiles_dir=PROFILES_DIR, vendors=None, snapshot_path=SNAPSHOT_PATH): """Validate the whole profile tree. Returns the error count. The per-vendor checks honour `vendors`; the setting_id and filament_id checks are cross-vendor properties a narrowed run cannot answer, so they always cover the - whole tree. With no `vendors`, OrcaFilamentLibrary is left out of the per-vendor - pass: it is the shared base bundle, its filaments are generic by design, and they - are checked through the vendors that inherit them. Naming it explicitly checks it. - The normalization pass covers it either way - see the comment on that loop. + whole tree. With no `vendors`, every bundle is checked except the `user` directory + a local validator run leaves behind, being its data dir rather than a bundle; + naming it explicitly checks it. OrcaFilamentLibrary is checked like any other + bundle, its only exemption being that a library filament may leave + compatible_printers empty - what check_filament_compatible_printers applies. The + normalization pass takes its own vendor list - see the comment on that loop. """ print_info("Checking profiles ...") errors_found = 0 @@ -1416,19 +1424,17 @@ def check_profiles(profiles_dir=PROFILES_DIR, vendors=None, snapshot_path=SNAPSH if vendors: checked = list(vendors) else: - checked = [v for v in list_profile_dirs(profiles_dir) if v != OFL] + checked = [v for v in list_profile_dirs(profiles_dir) if v != USER_DIR] for vendor in checked: errors_found += check_preset_name_uniqueness(profiles_dir, vendor) errors_found += check_filament_compatible_printers(profiles_dir, vendor) - if materials: - new_errors, new_warnings = check_machine_default_materials(profiles_dir, vendor) - errors_found += new_errors - warnings_found += new_warnings + new_errors, new_warnings = check_machine_default_materials(profiles_dir, vendor) + errors_found += new_errors + warnings_found += new_warnings - if obsolete_keys: - warnings_found += check_obsolete_keys(profiles_dir, vendor) + warnings_found += check_obsolete_keys(profiles_dir, vendor) new_errors, new_warnings = check_name_consistency(profiles_dir, vendor) errors_found += new_errors @@ -1445,12 +1451,11 @@ def check_profiles(profiles_dir=PROFILES_DIR, vendors=None, snapshot_path=SNAPSH errors_found += new_errors remedies.update(gaps) - # normalize and update-index know nothing of the OrcaFilamentLibrary exemption - # above - that bundle sits out the per-vendor pass because its filaments are - # generic by design, which says nothing about the shape of its files - so this pass - # takes its own vendor list. Unscoped that is the bundles with an index, exactly - # what those two commands take; a --vendor is passed through as given, so a bundle - # whose index has not landed yet still has its files held to what normalize writes. + # normalize and update-index judge file and index shape, not the preset-content + # rules above, so this pass takes its own vendor list. Unscoped that is the + # bundles with an index, exactly what those two commands take; a --vendor is + # passed through as given, so a bundle whose index has not landed yet still has + # its files held to what normalize writes. for vendor in (vendors or list_vendor_names(profiles_dir)): new_errors, gaps = check_normalized(profiles_dir, vendor) errors_found += new_errors @@ -2061,6 +2066,10 @@ def _normalize_profile(data, sub): del data[field] changes.append(f"remove {field}") + for field in sorted(OBSOLETE_KEYS.intersection(data)): + del data[field] + changes.append(f"remove {field}") + # BBS renamed extruder_clearance_radius to extruder_clearance_max_radius, but some # profiles carry both with different values, and the slicer cannot tell which one # to obey - a toolhead collision waiting to happen. Keep the larger one only. @@ -2306,8 +2315,9 @@ def build_index_sections(profiles_dir, vendor, profile_types=None): one message each, for the caller to report. `sections` is None when two files claim one preset name: the bundle can only hold one profile under a name, so rebuilding would pick a winner by directory order and quietly drop the other, and the index has - to be left alone instead. Deleting the stale copy is trim's job, which is why it - runs before this. + to be left alone instead. Identify the intended preset and delete or rename the + duplicate before retrying. Use trim only for deliberate unindexed-file cleanup, + previewed with --dry-run. """ vendor_dir = os.path.join(profiles_dir, vendor) sections = {} @@ -2360,8 +2370,8 @@ def build_index_sections(profiles_dir, vendor, profile_types=None): problems.append(f'{vendor}.json: {len(subs)} profiles are named "{name}" ' f'({", ".join(sorted(subs))}); only one can be indexed under ' f"that name, so delete or rename the others - " - f'"python scripts/orca_profile_tool.py trim" removes an ' - f"unindexed copy") + f"preview unindexed-file cleanup with " + f'"python scripts/orca_profile_tool.py trim --dry-run"') return (None if clashes else sections), problems @@ -2433,9 +2443,11 @@ examples: re-record the sanctioned filament_id state after a generate-id run after adding, renaming or deleting profile files, run in this order: - normalize -> trim -> update-index -> generate-id -> update-snapshot -> check -each step feeds the next: normalize writes the "type" update-index files a -profile by, and trim judges against the index update-index is about to rebuild. + normalize -> update-index -> generate-id -> update-snapshot -> check +normalize supplies missing types; update-index registers presets before id +generation. update-snapshot is needed when filament ids or claims change. +Use trim only for deliberate cleanup, previewed with --dry-run: it judges against +the current index and can delete newly added, unindexed presets. """ @@ -2483,23 +2495,18 @@ def build_parser(): name, parents=parents, help=help_text, description=description, allow_abbrev=False, formatter_class=argparse.RawDescriptionHelpFormatter) - check_cmd = add( + add( "check", [vendor_opt, snapshot_opt, profiles_opt], "validate the whole profile tree -- what CI runs", "Validate the whole profile tree: preset name uniqueness, index coverage\n" - "both ways, compatible_printers, conflicting and vector-typed keys,\n" - "filament_id length, that normalize and update-index would leave every\n" - "bundle alone, and the tree-wide setting_id and filament_id state.\n" - "Exits nonzero on errors.\n" + "both ways, compatible_printers, default-material references, obsolete,\n" + "conflicting and vector-typed keys, filament_id length, that normalize and\n" + "update-index would leave every bundle alone, and the tree-wide setting_id\n" + "and filament_id state. Exits nonzero on errors.\n" "\n" "--vendor narrows the per-vendor checks only: setting_id uniqueness and the\n" "filament_id state are cross-vendor properties a narrowed run cannot answer,\n" "so they always cover the whole tree.") - check_cmd.add_argument("--materials", action="store_true", - help="also check that every default material a machine names " - "exists") - check_cmd.add_argument("--obsolete-keys", action="store_true", dest="obsolete_keys", - help="also warn about settings the slicer no longer defines") generate_cmd = add( "generate-id", [vendor_opt, dry_run_opt, profiles_opt], @@ -2533,6 +2540,9 @@ def build_parser(): "loader only ever reads the sub_paths listed there, so an unindexed preset\n" "never loads.\n" "\n" + "Use only for deliberate cleanup, previewed with --dry-run. Newly added,\n" + "unindexed presets can be deleted too; omit trim from the authoring workflow.\n" + "\n" "Assets and data files are kept, a file that cannot be parsed is kept and\n" "reported, and so is one a surviving profile inherits from that no indexed\n" "profile provides -- but a stale copy of an indexed profile goes, since\n" @@ -2546,7 +2556,9 @@ def build_parser(): "A profile is indexed under the section its own \"type\" names, so run\n" "normalize first: it is what writes a missing type. Two files claiming one\n" "preset name leave that index alone, because a rebuild could only keep one\n" - "of them; run trim first, which is what clears a stale copy.") + "of them. Identify the intended preset and delete or rename the duplicate.\n" + "Use trim only for deliberate unindexed-file cleanup, previewed with\n" + "--dry-run; it can also delete newly authored presets.") add("update-snapshot", [dry_run_opt, snapshot_opt, profiles_opt], "re-record scripts/filament_id_snapshot.json", @@ -2591,8 +2603,7 @@ def main(argv=None): snapshot_path = SNAPSHOT_PATH if args.command == "check": - errors = check_profiles(profiles_dir, vendors, snapshot_path, - materials=args.materials, obsolete_keys=args.obsolete_keys) + errors = check_profiles(profiles_dir, vendors, snapshot_path) return 1 if errors else 0 if args.command == "generate-id": diff --git a/scripts/tests/test_filament_id.py b/scripts/tests/test_filament_id.py index 80afd78a6b..548dd9c777 100644 --- a/scripts/tests/test_filament_id.py +++ b/scripts/tests/test_filament_id.py @@ -1696,7 +1696,9 @@ class TestCli(unittest.TestCase): ["--update-snapshot"], # the pre-subcommand flag ["nonsense"], # not a command ["generate-id", "--filament-id", "--setting-id"], - ["generate-id", "--materials"], # check's option + ["generate-id", "--snapshot", "x"], # check's option + ["check", "--materials"], # removed flag + ["check", "--obsolete-keys"], # removed flag ["check", "--filament-id"], # generate-id's option ["normalize", "--snapshot", "x"], # not a snapshot command ["normalize", "--profile-type", "nozzle"]): # not a profile type diff --git a/scripts/tests/test_profile_tool.py b/scripts/tests/test_profile_tool.py index b96ea44e49..44b8604625 100644 --- a/scripts/tests/test_profile_tool.py +++ b/scripts/tests/test_profile_tool.py @@ -12,6 +12,7 @@ import contextlib import io import json import os +import re import shutil import sys import tempfile @@ -125,6 +126,20 @@ class TreeCase(unittest.TestCase): # normalize # --------------------------------------------------------------------------- +class TestObsoleteKeys(unittest.TestCase): + def test_obsolete_keys_match_the_loader_ignore_set(self): + path = os.path.join(REPO_ROOT, "src", "libslic3r", "PrintConfig.cpp") + with open(path, encoding="utf-8") as f: + source = f.read() + match = re.search( + r"void PrintConfigDef::handle_legacy\(.*?" + r"static\s+std::set\s+ignore\s*=\s*\{(.*?)\};", + source, re.DOTALL) + self.assertIsNotNone(match, "Could not locate the loader's obsolete-key set") + keys = re.sub(r"//[^\n]*|/\*.*?\*/", "", match.group(1), flags=re.DOTALL) + self.assertEqual(apt.OBSOLETE_KEYS, set(re.findall(r'"([^"\n]+)"', keys))) + + class TestNormalize(TreeCase): def test_a_missing_type_is_filled_in_from_the_directory(self): self.t.write("V", "filament/A.json", {"name": "A"}) @@ -148,16 +163,36 @@ class TestNormalize(TreeCase): self.t.write("V", "filament/A.json", { "type": "filament", "name": "A", "version": "1.2.3", "is_custom_defined": "1", "filament_type": "PLA", - "filament_vendor": "AV", "travel_speed": 200}) + "filament_vendor": "AV", "travel_speed": 200, + "filament_load_time": ["15"], "filament_unload_time": "0"}) rc, out = self.run_command("normalize") self.assertEqual(rc, 0, out) data = self.t.read("V", "filament/A.json") self.assertNotIn("version", data) self.assertNotIn("is_custom_defined", data) self.assertNotIn("travel_speed", data) # a process setting, not a filament one + self.assertNotIn("filament_load_time", data) + self.assertNotIn("filament_unload_time", data) self.assertEqual(data["filament_type"], ["PLA"]) self.assertEqual(data["filament_vendor"], ["AV"]) + def test_obsolete_keys_are_removed_from_every_profile_type(self): + for sub in ("filament", "process", "machine"): + with self.subTest(profile_type=sub): + expected = {"type": sub, "name": "A"} + self.t.write("V", f"{sub}/A.json", { + **expected, "silent_mode": "", "adaptive_layer_height": "0", + "anisotropic_surfaces": "1", "filament_load_time": ["0"], + "filament_unload_time": "0"}) + rc, out = self.run_command("normalize") + self.assertEqual(rc, 0, out) + self.assertEqual(self.t.read("V", f"{sub}/A.json"), expected) + before = self.t.bytes_map() + rc, out = self.run_command("normalize") + self.assertEqual(rc, 0, out) + self.assertIn("0 profile(s) normalized", out) + self.assertEqual(self.t.bytes_map(), before) + def test_the_larger_extruder_clearance_wins(self): # Keeping the smaller one would licence a toolhead collision. self.t.write("V", "machine/M.json", { @@ -186,6 +221,15 @@ class TestNormalize(TreeCase): def test_a_conforming_tree_is_left_byte_identical(self): self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"}) + # These used to be misclassified as obsolete: one is active, the other + # is a legacy alias that still supplies the toolhead clearance on load. + self.t.write("V", "machine/M.json", { + "type": "machine", "name": "M", "extruder_type": ["Direct Drive"], + "extruder_clearance_max_radius": "68", "machine_load_filament_time": "15", + "machine_unload_filament_time": "10"}) + self.t.write("V", "process/P.json", { + "type": "process", "name": "P", "travel_speed": "200", + "top_surface_fill_order": "outward"}) before = self.t.bytes_map() rc, out = self.run_command("normalize") self.assertEqual(rc, 0, out) @@ -200,7 +244,7 @@ class TestNormalize(TreeCase): b'{\n\t"type": "filament",\n\t"name": "A"\n}\n') def test_dry_run_writes_nothing(self): - self.t.write("V", "filament/A.json", {"name": "A"}) + self.t.write("V", "filament/A.json", {"name": "A", "bed_temperature": ["60"]}) before = self.t.bytes_map() rc, out = self.run_command("normalize", "--dry-run") self.assertEqual(rc, 0, out) @@ -453,6 +497,8 @@ class TestCheck(TreeCase): errors += apt.check_filament_id_length(self.t.profiles, "V") conflict, _warn = apt.check_conflict_keys(self.t.profiles, "V") errors += conflict + materials, _warn = apt.check_machine_default_materials(self.t.profiles, "V") + errors += materials return errors, buf.getvalue() def test_a_clean_bundle_reports_nothing(self): @@ -467,6 +513,27 @@ class TestCheck(TreeCase): self.assertGreater(errors, 0) self.assertIn("'compatible_printers' missing", out) + def test_a_library_filament_may_leave_compatible_printers_empty(self): + # The shared library is exempt from that rule and nothing else. + self.t.write(apt.OFL, "filament/A.json", + {"type": "filament", "name": "A", "instantiation": "true"}) + buf = io.StringIO() + with contextlib.redirect_stdout(buf): + errors = apt.check_filament_compatible_printers(self.t.profiles, apt.OFL) + self.assertEqual(errors, 0, buf.getvalue()) + + def test_the_library_is_checked_like_any_other_bundle(self): + # A file the library's own index does not reference must fail plain + # `check`, now that the per-vendor pass no longer skips it. + self.t.write(apt.OFL, "filament/Stray.json", + {"type": "filament", "name": "Stray"}) + snapshot = os.path.join(self.t.dir, "snapshot.json") + self.run_command("update-snapshot", "--snapshot", snapshot) + rc, out = self.run_command("check", "--snapshot", snapshot) + self.assertEqual(rc, 1, out) + self.assertIn(f"{apt.OFL}/filament/Stray.json: no {apt.OFL}.json list " + f"references it", out) + def test_a_duplicate_key_is_an_error(self): self.bundle().write_raw("V", "filament/B.json", b'{"type":"filament","name":"B","name":"B2"}') @@ -516,15 +583,28 @@ class TestCheck(TreeCase): self.assertGreater(errors, 0) self.assertIn("Filament id too long", out) - def test_obsolete_keys_are_opt_in_warnings(self): + def test_obsolete_key_warnings_exclude_active_and_renamed_options(self): self.bundle().write("V", "filament/B.json", { - "type": "filament", "name": "B", "silent_mode": True}) + "type": "filament", "name": "B", "silent_mode": "0", + "anisotropic_surfaces": "0", "extruder_type": ["Direct Drive"], + "extruder_clearance_max_radius": "68"}) buf = io.StringIO() with contextlib.redirect_stdout(buf): warnings = apt.check_obsolete_keys(self.t.profiles, "V") - self.assertEqual(warnings, 1) + self.assertEqual(warnings, 2) self.assertIn("Obsolete key", buf.getvalue()) + def test_obsolete_key_warnings_run_without_a_flag(self): + self.t.write("V", "filament/A.json", { + "type": "filament", "name": "A", "silent_mode": "0"}) + self.run_command("update-index") + snapshot = os.path.join(self.t.dir, "snapshot.json") + self.run_command("update-snapshot", "--snapshot", snapshot) + rc, out = self.run_command("check", "--snapshot", snapshot) + self.assertEqual(rc, 1, out) # normalization also rejects the obsolete key + self.assertIn("Obsolete key: 'silent_mode' found in V/filament/A.json", out) + self.assertIn("Files with warnings : 1", out) + def test_a_default_material_must_exist_somewhere(self): self.bundle().write("V", "machine/M.json", { "type": "machine", "name": "M 0.4 nozzle", @@ -535,6 +615,32 @@ class TestCheck(TreeCase): self.assertEqual(errors, 1) self.assertIn("'Nope'", buf.getvalue()) + def test_a_default_material_fails_check_without_a_flag(self): + # The reference check is part of the default run, not an opt-in: a + # dangling name has to fail plain `check`. + self.bundle() + self.t.write("V", "machine/M.json", { + "type": "machine", "name": "M 0.4 nozzle", + "default_filament_profile": ["A", "Nope"]}) + self.t.index("V", "machine", "M 0.4 nozzle", "machine/M.json") + snapshot = os.path.join(self.t.dir, "snapshot.json") + self.run_command("update-snapshot", "--snapshot", snapshot) + rc, out = self.run_command("check", "--snapshot", snapshot) + self.assertEqual(rc, 1, out) + self.assertIn("Missing filament profile: 'Nope'", out) + + def test_the_stray_user_directory_is_not_a_vendor(self): + # A local validator run leaves resources/profiles/user/ behind; an + # unscoped check must not count it as a bundle and warn about it. + self.bundle() + for sub in apt.PROFILE_SUBDIRS: + os.makedirs(os.path.join(self.t.profiles, apt.USER_DIR, "default", sub)) + snapshot = os.path.join(self.t.dir, "snapshot.json") + self.run_command("update-snapshot", "--snapshot", snapshot) + _rc, out = self.run_command("check", "--snapshot", snapshot) + self.assertIn("Checked vendors : 1", out) + self.assertNotIn("user", out) + def names(self, vendor="V"): """The preset name check for one bundle, which is what --vendor narrows.""" buf = io.StringIO() @@ -752,9 +858,8 @@ class TestNormalized(TreeCase): self.assertEqual(gaps["stale_index"], 0, out) def test_the_shared_base_bundle_is_covered_too(self): - # The per-vendor pass leaves OrcaFilamentLibrary out because its filaments are - # generic by design. That says nothing about the shape of its files, and - # normalize and update-index rewrite that bundle like any other. + # normalize and update-index own the shape of every bundle, the shared + # library included. self.t.write(apt.OFL, "filament/A.json", {"type": "filament", "name": "A", "version": "01.00.00.00"}) rc, out = self.run_command("check", "--snapshot", self.snapshot()) @@ -791,8 +896,7 @@ class TestDispatch(TreeCase): self.assertIn(expected, out) def test_an_option_belongs_to_one_command_only(self): - for argv in (["normalize", "--materials"], - ["trim", "--force"], + for argv in (["trim", "--force"], ["update-index", "--filament-id"], ["check", "--profile-type", "filament"], ["update-snapshot", "--vendor", "V"]): diff --git a/src/libslic3r/PresetBundle.cpp b/src/libslic3r/PresetBundle.cpp index 746856906c..dc731b63c4 100644 --- a/src/libslic3r/PresetBundle.cpp +++ b/src/libslic3r/PresetBundle.cpp @@ -7619,6 +7619,9 @@ bool PresetBundle::has_errors(bool check_duplicate_filament_subtypes) const if (this->check_preset_references()) has_errors = true; + if (this->check_printer_default_materials()) + has_errors = true; + return has_errors; } @@ -7711,6 +7714,70 @@ bool PresetBundle::check_preset_references() const return found; } +bool PresetBundle::check_printer_default_materials() const +{ + bool found = false; + // A model's default_materials list is shared by its variants, so report each unknown name once. + std::set checked_models; + // default_filament_profile is inherited from shared base machine presets, so one bad name can + // surface on many variants; report it once, at the first printer that names it. + std::set reported_unknown_profiles; + for (const Preset &printer : printers) { + if (!printer.is_system || printer.vendor == nullptr || printer.printer_technology() != ptFFF) + continue; + + const VendorProfile::PrinterModel *model = PresetUtils::system_printer_model(printer); + const PresetWithVendorProfile active_printer = printers.get_preset_with_vendor_profile(printer); + // Use the same name lookup as load_installed_filaments, not UI aliases or fuzzy matching. + // A model's defaults can cover different nozzles, but at least one must cover this variant. + const bool has_default = model != nullptr && std::any_of(model->default_materials.begin(), model->default_materials.end(), + [&](const std::string &name) { + const Preset *filament = filaments.find_preset(name, false); + return filament != nullptr && filament->is_system && + is_compatible_with_printer(filaments.get_preset_with_vendor_profile(*filament), active_printer); + }); + if (!has_default) { + found = true; + BOOST_LOG_TRIVIAL(error) << "Printer preset \"" << printer.name << "\" (vendor \"" << printer.vendor->name + << "\", model \"" << printer.config.opt_string("printer_model") << "\", variant \"" + << printer.config.opt_string("printer_variant") + << "\") has no compatible system filament in its model's \"default_materials\". " + "Add at least one full filament preset name compatible with this printer variant:\n" + << preset_file_uri(printer.file); + } + + if (model != nullptr && checked_models.insert(model).second) { + for (const std::string &name : model->default_materials) { + const Preset *filament = filaments.find_preset(name, false); + if (filament == nullptr || !filament->is_system) { + found = true; + BOOST_LOG_TRIVIAL(error) << "Printer model \"" << model->name << "\" (vendor \"" << printer.vendor->name + << "\") names the unknown system filament \"" << name + << "\" in its \"default_materials\":\n" << preset_file_uri(printer.file); + } + } + } + + if (printer.config.has("default_filament_profile")) { + for (const std::string &name : printer.config.opt("default_filament_profile")->values) { + // A ";"-separated list can leave an empty trailing segment; formatting noise, not a name. + if (name.empty()) + continue; + const Preset *filament = filaments.find_preset(name, false); + if ((filament == nullptr || !filament->is_system) && reported_unknown_profiles.insert(name).second) { + found = true; + BOOST_LOG_TRIVIAL(error) << "Printer preset \"" << printer.name << "\" (vendor \"" << printer.vendor->name + << "\", model \"" << printer.config.opt_string("printer_model") << "\", variant \"" + << printer.config.opt_string("printer_variant") + << "\") names the unknown system filament \"" << name + << "\" in its \"default_filament_profile\":\n" << preset_file_uri(printer.file); + } + } + } + } + return found; +} + // Orca: a filament is matched from the AMS by (filament_id + printer compatibility). // For any one printer, at most one instantiated filament preset with a given // filament_id may be compatible - otherwise the AMS match is ambiguous and the diff --git a/src/libslic3r/PresetBundle.hpp b/src/libslic3r/PresetBundle.hpp index 88455fabf3..5a8f34e706 100644 --- a/src/libslic3r/PresetBundle.hpp +++ b/src/libslic3r/PresetBundle.hpp @@ -617,6 +617,11 @@ public: // compatible_prints references a deleted (unknown) or renamed (old) preset name. bool check_preset_references() const; + // Validator-only: every system FFF printer variant needs a compatible system filament + // named in its model's default_materials, every name there and in the printer's + // default_filament_profile must resolve to a system filament. + bool check_printer_default_materials() const; + // Merge one vendor's presets with the other vendor's presets, report duplicates. // Public so per-vendor-cache consumers (e.g. the setup wizard) can assemble a // bundle out of several per-vendor caches loaded into separate PresetBundle instances. diff --git a/tests/libslic3r/test_preset_bundle_loading.cpp b/tests/libslic3r/test_preset_bundle_loading.cpp index 73d244cf42..6ec6ba9b1e 100644 --- a/tests/libslic3r/test_preset_bundle_loading.cpp +++ b/tests/libslic3r/test_preset_bundle_loading.cpp @@ -553,6 +553,107 @@ TEST_CASE("Profile validator flags dangling and renamed preset references", "[Pr } } +TEST_CASE("Every printer variant has a compatible default material", "[Preset][Validate][DefaultMaterials]") +{ + PresetBundle bundle; + auto &vendor = bundle.vendors["Acme"]; + vendor.id = vendor.name = "Acme"; + vendor.models.emplace_back(); + auto &model = vendor.models.back(); + model.id = model.name = "Acme Printer"; + model.default_materials = {"Acme PLA @0.4", "Acme PLA @0.6"}; + + for (const std::string variant : {"0.4", "0.6"}) { + model.variants.emplace_back(variant); + const std::string printer_name = "Acme Printer " + variant; + Preset &printer = add_inmemory_preset(bundle.printers, printer_name); + printer.is_system = true; + printer.is_visible = false; // Validation covers uninstalled variants too. + printer.vendor = &vendor; + printer.config.option("printer_model")->value = model.id; + printer.config.option("printer_variant")->value = variant; + printer.config.option("nozzle_diameter")->values = {std::stod(variant)}; + + Preset &filament = add_inmemory_preset(bundle.filaments, "Acme PLA @" + variant); + filament.is_system = true; + filament.vendor = &vendor; + filament.alias = "Acme PLA"; + filament.config.option("compatible_printers")->values = {printer_name}; + } + + // A second system filament, compatible with a user printer this model does not have, so a + // section can list a known-but-incompatible name without tripping the existence check. + Preset &other_printer = add_inmemory_preset(bundle.printers, "Acme Printer 0.2"); + other_printer.vendor = &vendor; + Preset &other_filament = add_inmemory_preset(bundle.filaments, "Acme PLA @0.2"); + other_filament.is_system = true; + other_filament.vendor = &vendor; + other_filament.alias = "Acme PLA"; + other_filament.config.option("compatible_printers")->values = {"Acme Printer 0.2"}; + + CHECK_FALSE(bundle.has_errors()); + bool expected_errors = true; + + SECTION("A model default for one nozzle does not cover another nozzle") { + model.default_materials = {"Acme PLA @0.4"}; + } + SECTION("An empty default list leaves every variant uncovered") { + model.default_materials.clear(); + } + SECTION("An unknown filament cannot be a default") { + model.default_materials = {"Missing PLA"}; + } + SECTION("An unknown name is an error even when a compatible default covers the variant") { + model.default_materials.insert(model.default_materials.begin(), "Missing PLA"); + } + SECTION("An unknown default_filament_profile name is an error") { + bundle.printers.find_preset("Acme Printer 0.6", false, true) + ->config.option("default_filament_profile", true)->values = {"Missing PLA"}; + } + SECTION("A known default_filament_profile name is not an error") { + bundle.printers.find_preset("Acme Printer 0.6", false, true) + ->config.option("default_filament_profile", true)->values = {"Acme PLA @0.6"}; + expected_errors = false; + } + SECTION("A short alias does not resolve as an installed default") { + model.default_materials = {"Acme PLA"}; + } + SECTION("A user filament cannot satisfy a shipped default") { + bundle.filaments.find_preset("Acme PLA @0.6", false, true)->is_system = false; + } + SECTION("One compatible default per variant is sufficient") { + model.default_materials.insert(model.default_materials.begin(), "Acme PLA @0.2"); + expected_errors = false; + } + SECTION("Compatibility conditions apply to each nozzle") { + model.default_materials = {"Acme PLA @0.4"}; + Preset *filament = bundle.filaments.find_preset("Acme PLA @0.4", false, true); + auto &library = bundle.vendors[PresetBundle::ORCA_FILAMENT_LIBRARY]; + library.id = library.name = PresetBundle::ORCA_FILAMENT_LIBRARY; + filament->vendor = &library; + filament->config.option("compatible_printers")->values.clear(); + filament->config.option("compatible_printers_condition")->value = "nozzle_diameter[0] == 0.4"; + } + SECTION("Library defaults respect printer exclusions") { + model.default_materials = {"Acme PLA @0.4"}; + Preset *filament = bundle.filaments.find_preset("Acme PLA @0.4", false, true); + auto &library = bundle.vendors[PresetBundle::ORCA_FILAMENT_LIBRARY]; + library.id = library.name = PresetBundle::ORCA_FILAMENT_LIBRARY; + filament->vendor = &library; + filament->config.option("compatible_printers")->values.clear(); + CHECK_FALSE(bundle.check_printer_default_materials()); + filament->m_excluded_from.insert("Acme Printer 0.6"); + } + SECTION("User printers do not need model defaults") { + model.default_materials = {"Acme PLA @0.4"}; + bundle.printers.find_preset("Acme Printer 0.6", false, true)->is_system = false; + expected_errors = false; + } + + CHECK(bundle.check_printer_default_materials() == expected_errors); + CHECK(bundle.has_errors() == expected_errors); +} + // Under a shared override key, the last preset merged into the full config overwrote the others', so an // edited slicing-pipeline override never reached Print::apply's diff and re-configuring a plugin never // re-sliced. Per-type keys make that collision impossible; guard the scoping here. From c833ccdf6ff76a7deb6fba8e55b3b71c908ccb47 Mon Sep 17 00:00:00 2001 From: Ian Bassi Date: Thu, 17 Sep 2026 14:27:53 -0300 Subject: [PATCH 7/8] Update localizations and improve strings (#15739) --- localization/i18n/OrcaSlicer.pot | 223 ++++++--- localization/i18n/ca/OrcaSlicer_ca.po | 502 +++++++++++++++---- localization/i18n/cs/OrcaSlicer_cs.po | 504 ++++++++++++++----- localization/i18n/de/OrcaSlicer_de.po | 498 +++++++++++++++---- localization/i18n/en/OrcaSlicer_en.po | 223 ++++++--- localization/i18n/es/OrcaSlicer_es.po | 494 +++++++++++++++---- localization/i18n/eu/OrcaSlicer_eu.po | 494 +++++++++++++++---- localization/i18n/fr/OrcaSlicer_fr.po | 498 +++++++++++++++---- localization/i18n/hu/OrcaSlicer_hu.po | 502 +++++++++++++++---- localization/i18n/it/OrcaSlicer_it.po | 502 +++++++++++++++---- localization/i18n/ja/OrcaSlicer_ja.po | 502 +++++++++++++++---- localization/i18n/ko/OrcaSlicer_ko.po | 504 ++++++++++++++----- localization/i18n/lt/OrcaSlicer_lt.po | 498 +++++++++++++++---- localization/i18n/nl/OrcaSlicer_nl.po | 504 ++++++++++++++----- localization/i18n/pl/OrcaSlicer_pl.po | 502 +++++++++++++++---- localization/i18n/pt_BR/OrcaSlicer_pt_BR.po | 496 +++++++++++++++---- localization/i18n/ru/OrcaSlicer_ru.po | 502 +++++++++++++++---- localization/i18n/sv/OrcaSlicer_sv.po | 508 +++++++++++++++----- localization/i18n/th/OrcaSlicer_th.po | 502 +++++++++++++++---- localization/i18n/tr/OrcaSlicer_tr.po | 498 +++++++++++++++---- localization/i18n/uk/OrcaSlicer_uk.po | 498 +++++++++++++++---- localization/i18n/vi/OrcaSlicer_vi.po | 504 ++++++++++++++----- localization/i18n/zh_CN/OrcaSlicer_zh_CN.po | 502 +++++++++++++++---- localization/i18n/zh_TW/OrcaSlicer_zh_TW.po | 502 +++++++++++++++---- src/libslic3r/GCode/ToolOrdering.cpp | 6 +- src/libslic3r/PrintConfig.cpp | 3 +- src/slic3r/GUI/AMSDryControl.cpp | 4 +- src/slic3r/GUI/ColorDecomposeSupport.cpp | 5 +- src/slic3r/GUI/GCodeViewer.cpp | 9 +- src/slic3r/GUI/PublishSettingsDialog.cpp | 107 +++-- src/slic3r/GUI/UnsavedChangesDialog.cpp | 2 +- src/slic3r/GUI/Widgets/TempInput.cpp | 4 +- src/slic3r/Utils/PresetUpdater.cpp | 4 +- 33 files changed, 9124 insertions(+), 2482 deletions(-) diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index a063ab0484..32269c0e6d 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -2293,13 +2293,6 @@ msgstr "" msgid "%s has been removed." msgstr "" - -msgid "Select the language" -msgstr "" - -msgid "Language" -msgstr "" - #, possible-c-format, possible-boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "" @@ -3486,10 +3479,12 @@ msgstr "" msgid "Switch track at Filament Track Switch" msgstr "" -msgid "The maximum temperature cannot exceed " +#, possible-c-format, possible-boost-format +msgid "The maximum temperature cannot exceed %d" msgstr "" -msgid "The minmum temperature should not be less than " +#, possible-c-format, possible-boost-format +msgid "The minimum temperature should not be less than %d" msgstr "" msgid "Type to filter..." @@ -4322,6 +4317,12 @@ msgid "" "Error message: %1%" msgstr "" +#, possible-boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" + #, possible-boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "" @@ -4994,8 +4995,10 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "" #, possible-c-format, possible-boost-format -msgid "" -"Is it %s%% or %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "" + +msgid "%" msgstr "" #, possible-boost-format @@ -5021,16 +5024,13 @@ msgstr "" msgid "System agents" msgstr "" -msgid "No plugin selected" -msgstr "" - msgid "Add plugin" msgstr "" -msgid "Select plugin" +msgid "Remove plugin" msgstr "" -msgid "Remove plugin" +msgid "No plugin selected" msgstr "" msgid "Configure" @@ -5286,13 +5286,16 @@ msgstr "" msgid "Regroup filament" msgstr "" -msgid "up to" +#, possible-boost-format +msgid "up to %1% mm" msgstr "" -msgid "above" +#, possible-boost-format +msgid "above %1% mm" msgstr "" -msgid "from" +#, possible-boost-format +msgid "from %1% to %2% mm" msgstr "" msgid "Usage" @@ -5643,7 +5646,7 @@ msgstr "" msgid "Size:" msgstr "" -#, possible-boost-format +#, possible-c-format, possible-boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "" @@ -7180,6 +7183,12 @@ msgctxt "Layers" msgid "Bottom" msgstr "" +msgid "This setting does not specify a plugin capability type." +msgstr "" + +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "" + msgid "Plugin Selection" msgstr "" @@ -8290,7 +8299,6 @@ msgstr "" msgid "Language selection" msgstr "" - msgid "Asia-Pacific" msgstr "" @@ -8384,6 +8392,9 @@ msgstr "" msgid "General" msgstr "" +msgid "Language" +msgstr "" + msgid "Metric" msgstr "" @@ -8773,9 +8784,6 @@ msgstr "" msgid "Dimmed layer brightness" msgstr "" -msgid "%" -msgstr "" - msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." @@ -9169,13 +9177,12 @@ msgstr "" msgid "Filament %d (mixed)" msgstr "" -msgid "needs" +#, possible-boost-format +msgid "%1% needs %2%, which is not enabled." msgstr "" -msgid "not enabled" -msgstr "" - -msgid "material not published" +#, possible-boost-format +msgid "%1% needs %2%, whose material will not be published." msgstr "" msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." @@ -9230,6 +9237,9 @@ msgstr "" msgid "Detach from parent" msgstr "" +msgid "Save without parent" +msgstr "" + msgid "Unique preset" msgstr "" @@ -9879,9 +9889,15 @@ msgstr "" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "" +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "" + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "" +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "" + msgid "Still print by object?" msgstr "" @@ -10230,9 +10246,6 @@ msgstr "" msgid "Printable space" msgstr "" -msgid "Printer Agent" -msgstr "" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "" @@ -10592,12 +10605,6 @@ msgstr "" msgid "Capabilities" msgstr "" -msgid "Left: " -msgstr "" - -msgid "Right: " -msgstr "" - msgid "Show all presets (including incompatible)" msgstr "" @@ -11401,15 +11408,19 @@ msgstr "" msgid "Copying of file %1% to %2% failed: %3%" msgstr "" +msgid "Downloading new vendor profile(s): " +msgstr "" + +#, possible-boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "" + +msgid "Failed to download vendor profile(s): " +msgstr "" + msgid "Please check any unsaved changes before updating the configuration." msgstr "" -msgid "Configuration package: " -msgstr "" - -msgid " updated to " -msgstr "" - msgid "Open G-code file:" msgstr "" @@ -11465,10 +11476,12 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "" -msgid "Grouping error: " +#, possible-boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" msgstr "" -msgid " can not be placed in the " +#, possible-boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" msgstr "" msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -11582,6 +11595,9 @@ msgstr "" msgid "%1% is too tall, and collisions will be caused." msgstr "" +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "" + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" @@ -11904,6 +11920,9 @@ msgstr "" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "" +msgid "Printer Agent" +msgstr "" + msgid "Select the network agent implementation for printer communication." msgstr "" @@ -12752,6 +12771,9 @@ msgstr "" msgid "Concentric" msgstr "" +msgid "Spiral Inset" +msgstr "" + msgid "Hilbert Curve" msgstr "" @@ -12821,7 +12843,7 @@ msgid "Top surface fill order" msgstr "" msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" @@ -12830,7 +12852,7 @@ msgid "Bottom surface fill order" msgstr "" msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" @@ -12918,6 +12940,12 @@ msgstr "" msgid "Clockwise" msgstr "" +msgid "Distance to rod" +msgstr "" + +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "" + msgid "Height to rod" msgstr "" @@ -14868,6 +14896,15 @@ msgstr "" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "" +msgid "Print unsupported walls last" +msgstr "" + +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" + msgid "Outer walls" msgstr "" @@ -15277,6 +15314,27 @@ msgstr "" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "" +msgid "Wipe inward" +msgstr "" + +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" + +msgid "Wipe inward distance" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" + msgid "Wipe before external loop" msgstr "" @@ -15517,7 +15575,7 @@ msgstr "" msgid "No sparse layers (beta)" msgstr "" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." msgstr "" msgid "Prime all printing extruders" @@ -15538,6 +15596,24 @@ msgstr "" msgid "Cyclic" msgstr "" +msgid "Cyclic order" +msgstr "" + +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" + +msgid "Apply cyclic order to first layer" +msgstr "" + +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" + msgid "Slice gap closing radius" msgstr "" @@ -15547,9 +15623,6 @@ msgstr "" msgid "Slicing Mode" msgstr "" -msgid "Other" -msgstr "" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "" @@ -16452,6 +16525,12 @@ msgstr "" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" +msgid "Strict mode" +msgstr "" + +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "" + msgid "Normative check" msgstr "" @@ -16464,10 +16543,22 @@ msgstr "" msgid "This outputs the model’s information." msgstr "" +msgid "Inspect mesh (JSON to stdout)" +msgstr "" + +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "" + +msgid "Inspect paint (JSON to stdout)" +msgstr "" + +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "" + msgid "Export Settings" msgstr "" -msgid "This exports settings to a file." +msgid "This exports settings to a file. Use - to write them to stdout." msgstr "" msgid "Send progress to pipe" @@ -16524,6 +16615,24 @@ msgstr "" msgid "Rotation angle around the Y axis in degrees." msgstr "" +msgid "Ground largest face" +msgstr "" + +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "" + +msgid "Ground face by normal" +msgstr "" + +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "" + +msgid "Ground face at point" +msgstr "" + +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "" + msgid "Scale the model by a float factor." msgstr "" @@ -19654,10 +19763,12 @@ msgstr "" msgid "Drying-Dehumidifying" msgstr "" -msgid " maximum drying temperature is " +#, possible-c-format, possible-boost-format +msgid "%s maximum drying temperature is %d°C." msgstr "" -msgid " minimum drying temperature is " +#, possible-c-format, possible-boost-format +msgid "%s minimum drying temperature is %d°C." msgstr "" msgid "This filament may not be completely dried." diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index 4fee47786f..e1a06108b6 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2025-03-15 10:55+0100\n" "Last-Translator: \n" "Language-Team: \n" @@ -2522,13 +2522,6 @@ msgstr "Hi ha una actualització disponible. Obriu el quadre de diàleg del paqu msgid "%s has been removed." msgstr "%s s'ha eliminat." - -msgid "Select the language" -msgstr "Seleccioneu l'idioma" - -msgid "Language" -msgstr "Idioma" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3782,11 +3775,15 @@ msgstr "Retirar el filament actual al Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Canviar de via al Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "La temperatura màxima no pot superar " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "La temperatura màxima no pot superar %d" -msgid "The minmum temperature should not be less than " -msgstr "La temperatura mínima no hauria de ser inferior a " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "La temperatura mínima no hauria de ser inferior a %d" # AI Translated msgid "Type to filter..." @@ -4687,6 +4684,15 @@ msgstr "" "Error en copiar el codi-G temporal al codi-G de sortida. Potser la targeta SD està bloquejada contra escriptura?\n" "Missatge d'error: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Ha fallat la còpia del codi-G temporal al codi-G de sortida.\n" +"Missatge d'error: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Error en copiar el codi-G temporal al codi-G de sortida. Hi pot haver un problema amb el dispositiu de destinació, intenteu exportar novament o utilitzeu un dispositiu diferent. El codi-G de sortida malmès és a %1%.tmp." @@ -5428,10 +5434,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "El valor %s està fora de rang. El rang vàlid és de %d a %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"És %s%% or %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "És %s%% or %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5457,22 +5464,18 @@ msgstr "Format no vàlid. Format vectorial esperat: \"%1%\"" msgid "System agents" msgstr "Agents del sistema" -# AI Translated -msgid "No plugin selected" -msgstr "Cap connector seleccionat" - # AI Translated msgid "Add plugin" msgstr "Afegir connector" -# AI Translated -msgid "Select plugin" -msgstr "Seleccionar connector" - # AI Translated msgid "Remove plugin" msgstr "Eliminar connector" +# AI Translated +msgid "No plugin selected" +msgstr "Cap connector seleccionat" + # AI Translated msgid "Configure" msgstr "Configurar" @@ -5731,14 +5734,20 @@ msgstr "Estableix a l'òptim" msgid "Regroup filament" msgstr "Reagrupa filaments" -msgid "up to" -msgstr "fins a" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "fins a %1% mm" -msgid "above" -msgstr "sobre" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "per sobre de %1% mm" -msgid "from" -msgstr "des de" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "de %1% a %2% mm" msgid "Usage" msgstr "Ús" @@ -6101,7 +6110,7 @@ msgstr "Volum:" msgid "Size:" msgstr "Mida:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "S'han trobat conflictes de rutes gcode a la capa %d, Z = %.2lfmm. Si us plau, separeu els objectes conflictius més lluny ( %s <-> %s )." @@ -6415,11 +6424,13 @@ msgstr "Desa el projecte com a" msgid "Save current project as" msgstr "Desar el projecte actual com" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Publicar 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Exportar un fitxer 3MF amb la configuració seleccionada incrustada" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importar 3MF STL/STEP/SVG/OBJ/AMF" @@ -7704,6 +7715,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferior" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Aquesta opció no especifica cap tipus de capacitat del connector." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Aquesta opció especifica un tipus de capacitat del connector no reconegut: " + # AI Translated msgid "Plugin Selection" msgstr "Selecció de connectors" @@ -8275,11 +8294,13 @@ msgstr "Confirmeu que els Codis-G d'aquests perfils són segurs per evitar danys msgid "Customized Preset" msgstr "Perfil personalitzat" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "No s'han pogut aplicar algunes opcions publicades:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "S'han canviat algunes ranures de filament:" # AI Translated msgid "Component name(s) inside step file not in UTF-8 format!" @@ -8693,13 +8714,17 @@ msgstr "Desa el fitxer Laminat com a:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "El fitxer %s s'ha enviat a l'emmagatzematge de la impressora i es pot visualitzar a la impressora." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Publicar el fitxer 3MF com a:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"No s'ha pogut exportar el fitxer 3MF publicat.\n" +"Comproveu si la carpeta existeix en línia o si altres programes tenen el fitxer obert." msgid "Publish" msgstr "Publicar" @@ -8918,7 +8943,6 @@ msgstr "Voleu continuar?" msgid "Language selection" msgstr "Selecció d'idiomes" - msgid "Asia-Pacific" msgstr "Àsia-Pacífic" @@ -9024,6 +9048,9 @@ msgstr "Ruta de la Instància Actual: " msgid "General" msgstr "General" +msgid "Language" +msgstr "Idioma" + msgid "Metric" msgstr "Mètric" @@ -9489,9 +9516,6 @@ msgstr "En desplaçar el control lliscant de capes a la previsualització lamina msgid "Dimmed layer brightness" msgstr "Brillantor de les capes enfosquides" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9910,63 +9934,80 @@ msgstr "Carregant dades" msgid "Jump to webpage" msgstr "Anar a la pàgina web" +# AI Translated msgid "Material" -msgstr "" +msgstr "Material" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filament mixt" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Alguns filaments mixtos depenen de filaments que no es publicaran:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (mixt)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% necessita %2%, que no està activat." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% necessita %2%, el material del qual no es publicarà." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Per publicar un filament mixt, activeu tots els filaments que fa servir i trieu Publicació completa o compliu el seu requisit de Tipus." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Publicar igualment" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Publicar 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Seleccioneu quines opcions es publicaran al fitxer 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki de Publicar 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Guia en vídeo de Publicar 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filament mixt - es publica com un conjunt quan se selecciona \"Activar\" a dalt" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Publicar aquest filament mixt i activar + publicar completament els seus filaments components" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Publicar aquesta ranura de filament al fitxer 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Publicació completa" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Incrustar tot el filament d'aquesta ranura al fitxer 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtrar els no seleccionats" #, c-format, boost-format msgid "Save %s as" @@ -9985,6 +10026,10 @@ msgstr "Copia en aquest perfil tots els valors heretats del perfil pare i elimin msgid "Detach from parent" msgstr "Desvincula del pare" +# AI Translated +msgid "Save without parent" +msgstr "Desar sense pare" + # AI Translated msgid "Unique preset" msgstr "Perfil únic" @@ -10692,9 +10737,17 @@ msgstr "Es necessita una torre de purga per a la detecció d'acumulació. Pot ha msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Activar tant l'alçada Z precisa com la torre de purga pot causar errors de tall. Voleu activar l'alçada Z precisa igualment?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "El timelapse suau necessita una Torre de Purga a cada capa, cosa que no és compatible amb \"Sense capes poc denses\". S'ha desactivat \"Sense capes poc denses\"." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "La Torre de Purga és necessària per a un timelapse suau. Pot haver-hi defectes en el model sense Torre de Purga. Vols habilitar la Torre de Purga?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Sense capes poc denses\" no és compatible amb el timelapse suau, que necessita una Torre de Purga a cada capa. El timelapse ha canviat al mode tradicional." + msgid "Still print by object?" msgstr "Continuar imprimint per objecte?" @@ -11072,9 +11125,6 @@ msgstr "Perfils de processos compatibles" msgid "Printable space" msgstr "Espai imprimible" -msgid "Printer Agent" -msgstr "Agent de la impressora" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Seleccioneu la implementació de l'agent de xarxa per a la comunicació amb la impressora. Els agents disponibles es registren a l'inici." @@ -11495,14 +11545,6 @@ msgstr "Nombre d'extrusors" msgid "Capabilities" msgstr "Capacitats" -# AI Translated -msgid "Left: " -msgstr "Esquerra: " - -# AI Translated -msgid "Right: " -msgstr "Dreta: " - msgid "Show all presets (including incompatible)" msgstr "Mostra tots els perfils ( inclosos els incompatibles )" @@ -12355,15 +12397,22 @@ msgstr "Reparació cancel·lada" msgid "Copying of file %1% to %2% failed: %3%" msgstr "La còpia del fitxer %1% a %2% ha fallat: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "S'estan descarregant perfils de fabricant nous: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Paquet de configuració: %1% actualitzat a %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "No s'han pogut descarregar els perfils de fabricant: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Cal comprovar els canvis no desats abans de les actualitzacions de configuració." -msgid "Configuration package: " -msgstr "Paquet de configuració: " - -msgid " updated to " -msgstr " actualitzat a " - msgid "Open G-code file:" msgstr "Obre el fitxer de Codi-G:" @@ -12428,11 +12477,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "L'Input Shaping només és compatible amb Klipper, RepRapFirmware i Marlin 2." -msgid "Grouping error: " -msgstr "Error d'agrupació: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Error d'agrupació: %1% no es pot col·locar al broquet esquerre" -msgid " can not be placed in the " -msgstr " no es pot col·locar al " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Error d'agrupació: %1% no es pot col·locar al broquet dret" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12547,6 +12600,10 @@ msgstr "%1% està massa a prop d'altres i es poden produir col·lisions." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% és massa alt i es provocaran col·lisions." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "La posició relativa del model i la Torre de Purga no compleix els requisits de la funció \"Sense capes poc denses\". Ajusteu-ne les posicions relatives, reduïu l'alçada del model o desactiveu \"Sense capes poc denses\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " està massa a prop de l'àrea d'exclusió, pot haver-hi col·lisions en imprimir." @@ -12911,6 +12968,9 @@ msgstr "Utilitzar 3MF en lloc de G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Activeu-ho si la impressora accepta un fitxer 3MF com a treball d'impressió. Quan està activat, Orca Slicer envia el fitxer laminat com a .gcode.3mf, en lloc d'un fitxer .gcode simple." +msgid "Printer Agent" +msgstr "Agent de la impressora" + msgid "Select the network agent implementation for printer communication." msgstr "Seleccioneu la implementació de l'agent de xarxa per a la comunicació amb la impressora." @@ -13987,6 +14047,10 @@ msgstr "Alineat Rectilini" msgid "Concentric" msgstr "Concèntric" +# AI Translated +msgid "Spiral Inset" +msgstr "Espiral interior" + msgid "Hilbert Curve" msgstr "Corba de Hilbert" @@ -14078,13 +14142,13 @@ msgstr "Ordre d'emplenament de la superfície superior" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direcció en què s'omplen les superfícies superiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n" -"Cap a fora comença al centre de la superfície, de manera que l'excés de material es desplaça cap a la vora, on és menys visible. Cap a dins comença a la vora i acaba amb les corbes tancades del centre.\n" -"Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció." +"Direcció en què s'omplen les superfícies superiors quan es fa servir un patró basat en el centre (Concèntric, Espiral interior, Acords d'Arquimedes, Octograma en Espiral).\n" +"Cap a fora comença al centre de la superfície, de manera que el material sobrant s'empeny cap a la vora, on és menys visible. Cap a dins comença a la vora i acaba amb les corbes tancades del centre.\n" +"Per defecte fa servir l'ordre del camí més curt, que pot anar en qualsevol dels dos sentits." # AI Translated msgid "Bottom surface fill order" @@ -14092,13 +14156,13 @@ msgstr "Ordre d'emplenament de la superfície inferior" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direcció en què s'omplen les superfícies inferiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n" -"Cap a dins comença cada superfície amb les corbes exteriors més amples, cosa que millora l'adherència de la capa inicial en plaques on les corbes tancades del centre poden no adherir-se. Cap a fora comença al centre i desplaça l'excés de material cap a la vora.\n" -"Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció." +"Direcció en què s'omplen les superfícies inferiors quan es fa servir un patró basat en el centre (Concèntric, Espiral interior, Acords d'Arquimedes, Octograma en Espiral).\n" +"Cap a dins comença cada superfície per les corbes exteriors més amples, cosa que millora l'adhesió de la capa inicial en llits on les corbes tancades del centre poden no agafar-se. Cap a fora comença al centre i empeny el material sobrant cap a la vora.\n" +"Per defecte fa servir l'ordre del camí més curt, que pot anar en qualsevol dels dos sentits." msgid "Internal solid infill pattern" msgstr "Patró de farciment sòlid intern" @@ -14203,6 +14267,14 @@ msgstr "En sentit contrari a les agulles del rellotge" msgid "Clockwise" msgstr "En el sentit de les agulles del rellotge" +# AI Translated +msgid "Distance to rod" +msgstr "Distància a la barra" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Distància horitzontal de la punta del broquet a la vora més llunyana de la barra. Es fa servir per evitar col·lisions en la impressió per objecte." + msgid "Height to rod" msgstr "Alçada a la tija" @@ -16421,6 +16493,20 @@ msgstr "Detectar voladís de perímetre" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Detectar el percentatge de voladís en relació amb l'amplada de la línia i utilitzar una velocitat diferent per imprimir. Per al voladís del 100%%, s'utilitza la velocitat de pont." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Imprimir al final els perímetres sense suport" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Els bucles de perímetre que queden completament a l'aire s'imprimeixen quan alguna cosa els pot sostenir:\n" +"s'extrudeixen després dels altres perímetres de la seva illa, començant pel més interior, sigui quin sigui l'ordre de perímetres.\n" +"Un bucle que només poden ancorar els ponts d'aquesta capa espera que s'imprimeixin aquests ponts, mentre que un bucle que va al costat d'un perímetre amb suport manté el seu lloc abans del farciment, que el necessita com a ancoratge." + # AI Translated msgid "Outer walls" msgstr "Perímetres exteriors" @@ -16869,6 +16955,39 @@ msgstr "Neteja en bucles" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Per minimitzar la visibilitat de la costura en una extrusió de bucle tancat, s'executa un petit moviment cap a l'interior abans que l'extrusora surti del bucle." +# AI Translated +msgid "Wipe inward" +msgstr "Netejar cap a dins" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Només s'aplica als perímetres exteriors, inclosos els contorns dels forats. Durant la neteja mou el broquet calent cap als perímetres interiors ja impresos per reduir el reescalfament del plàstic acabat d'imprimir i les marques de costura.\n" +"\n" +"És especialment útil amb alçades de capa per sota de 0,1 mm, on les marques de neteja es veuen més.\n" +"\n" +"Fa servir la neteja normal si no hi ha cap perímetre interior contigu ja imprès (zones d'un sol perímetre o ordre de perímetres Exterior/Interior) o si no es troba cap trajectòria cap a dins amb suport, per exemple a cantonades tancades o a buits de la costura." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Distància de neteja cap a dins" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Distància que es desplaça la trajectòria de neteja allunyant-se del perímetre exterior, indicada en mil·límetres o com a percentatge de l'amplada d'extrusió real del perímetre exterior.\n" +"\n" +"Per exemple, 50% desplaça la trajectòria la meitat de l'amplada del perímetre exterior. El desplaçament efectiu està limitat tant per l'amplada real del perímetre exterior com per l'espai disponible fins al perímetre contigu, de manera que els valors per sobre de 100% o una distància absoluta equivalent no tenen cap efecte addicional. Poseu-hi 0 per desactivar el desplaçament." + msgid "Wipe before external loop" msgstr "Netejar abans del bucle extern" @@ -17133,8 +17252,9 @@ msgstr "Recull la nova eina sense esperar que arribi a la temperatura d'impressi msgid "No sparse layers (beta)" msgstr "Sense capes poc denses( beta )" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Si està habilitat, la Torre de Purga no s'imprimeix en capes sense canvis d'eina. En capes amb canvi d'eina, l'extrusor es desplaçarà cap avall per imprimir la Torre de Purga. L'usuari és responsable de garantir que no hi hagi col·lisió amb la impressió." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Si s'activa, la Torre de Purga no s'imprimirà a les capes sense canvis d'eina. A les capes amb un canvi d'eina, l'extrusor baixarà per imprimir la Torre de Purga, de manera que la torre queda per sota del model i el capçal ha de baixar fins a ella. Es rebutgen les disposicions en què això xocaria amb un objecte ja imprès. No té cap efecte amb el timelapse suau ni amb la detecció d'obstruccions al broquet, que necessiten una torre a cada capa." msgid "Prime all printing extruders" msgstr "Purgar tots els extrusors d'impressió" @@ -17160,6 +17280,34 @@ msgstr "" msgid "Cyclic" msgstr "Cíclic" +# AI Translated +msgid "Cyclic order" +msgstr "Ordre cíclic" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Seqüència de filaments personalitzada que fa servir l'ordre cíclic de canvis d'eina, com a números de filament separats per comes (p. ex. \"3,2,1,4\").\n" +"Cada capa imprimeix els seus filaments seguint aquesta seqüència; els filaments que no hi consten s'imprimeixen al final, en ordre ascendent.\n" +"Deixeu-ho buit per recórrer els filaments en ordre ascendent." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Aplicar l'ordre cíclic a la capa inicial" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Aplica l'ordre cíclic de canvis d'eina també a la capa inicial.\n" +"Per defecte està desactivat, perquè la capa inicial s'ordena en lloc d'això per aconseguir la millor adhesió al llit: els filaments que imprimeixen detalls petits i fràgils de la capa inicial s'imprimeixen al final, de manera que els canvis d'eina i els recorreguts posteriors tenen menys probabilitats d'arrencar aquestes peces mal ancorades. Aquest ordre de la capa inicial també respecta una seqüència de filaments personalitzada per a la capa inicial quan se n'ha definit una. L'avantatge de l'ordre cíclic (els canvis d'eina addicionals donen a cada capa més temps per refredar-se) no s'aplica a la capa inicial, que s'imprimeix a poc a poc i calenta per afavorir l'adhesió.\n" +"Activeu-ho només si necessiteu exactament la mateixa seqüència d'eines a totes les capes, inclosa la primera, a costa d'aquesta optimització de l'adhesió." + msgid "Slice gap closing radius" msgstr "Radi de tancament dels buits en laminar" @@ -17169,9 +17317,6 @@ msgstr "Les esquerdes de menys de dues vegades el radi de tancament de buits s'o msgid "Slicing Mode" msgstr "Mode de laminat" -msgid "Other" -msgstr "Altre" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Utilitzeu \"Parell-imparell\" per als models d'avió 3DLabPrint. Utilitzeu \"Tancar forats\" per tancar tots els forats del model." @@ -18189,6 +18334,14 @@ msgstr "No comprovar" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "No executar cap comprovació de validesa, com ara la comprovació de conflictes de trajectòria al Codi-G." +# AI Translated +msgid "Strict mode" +msgstr "Mode estricte" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Surt amb un codi diferent de zero quan el llescat genera un avís no crític que altrament només es registraria, com ara un model que necessita suports mentre els suports estan desactivats. Feu-ho servir en CI o en processos automatitzats que mai no han de lliurar un llescat subtilment defectuós. Cadascun d'aquests avisos també apareix amb una classe estable a la matriu `warnings` de result.json, que només s'escriu a Linux. No es pot combinar amb --no-check, que omet la comprovació de suports." + msgid "Normative check" msgstr "Comprovació normativa" @@ -18201,11 +18354,28 @@ msgstr "Informació del model de sortida" msgid "This outputs the model’s information." msgstr "Emet la informació del model." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Inspeccionar la malla (JSON a stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Escriu a stdout un resum JSON de cada objecte carregat i després surt: les seves capses contenidores i les cares de l'envolupant convexa sobre les quals es pot recolzar, amb les normals, àrees i centres corresponents. Aquestes són les cares entre les quals trien les opcions --ground-*. Alternativa llegible per màquina a --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Inspeccionar el pintat (JSON a stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Escriu un resum JSON estructurat de cada capa pintada (suports, costura, color MMU, pell difusa) ja desada al model carregat — nombre de facetes, àrea de superfície i capsa contenidora local a la malla per a cada estat — i després surt. Alternativa llegible per màquina a obrir les eines de pintat a la interfície." + msgid "Export Settings" msgstr "Exportar Configuració" -msgid "This exports settings to a file." -msgstr "Exporta la configuració a un fitxer." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Això exporta la configuració a un fitxer. Feu servir - per escriure-la a stdout." msgid "Send progress to pipe" msgstr "Envia el progrés a la canalització" @@ -18261,6 +18431,30 @@ msgstr "Rotar al voltant de l'eix Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Angle de rotació al voltant de l'eix Y en graus." +# AI Translated +msgid "Ground largest face" +msgstr "Recolzar sobre la cara més gran" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Recolza cada objecte sobre la cara més gran de la seva envolupant convexa i el deixa caure sobre el llit. Entre cares igual de grans es conserva la que ja mira cap avall. Els objectes sense una cara prou gran per recolzar-s'hi es deixen tal com estan. Les transformacions s'apliquen en l'ordre de la línia d'ordres, de manera que es respecten les rotacions indicades abans d'aquesta opció. --orient 1 s'executa després de totes les transformacions i substitueix l'orientació." + +# AI Translated +msgid "Ground face by normal" +msgstr "Recolzar sobre la cara segons la normal" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Recolza cada objecte sobre la cara de l'envolupant convexa la normal exterior de la qual sigui més propera a la direcció NX,NY,NZ i el deixa caure sobre el llit. La direcció és en coordenades de l'objecte, que inclouen les rotacions indicades abans d'aquesta opció i coincideixen amb els eixos de la safata llevat que el fitxer d'entrada giri l'objecte. Per exemple, 1,0,0 recolza l'objecte sobre el seu costat +X. --orient 1 s'executa després de totes les transformacions i substitueix l'orientació." + +# AI Translated +msgid "Ground face at point" +msgstr "Recolzar sobre la cara en un punt" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Recolza cada objecte sobre la cara de l'envolupant convexa que conté el punt X,Y,Z i el deixa caure sobre el llit. El punt és en coordenades de l'objecte, que inclouen les rotacions indicades abans d'aquesta opció; --inspect-mesh indica els centres de les cares en aquestes coordenades. Els objectes sense una cara així es deixen tal com estan, i l'execució falla si cap objecte en té. --orient 1 s'executa després de totes les transformacions i substitueix l'orientació." + msgid "Scale the model by a float factor." msgstr "Escala el model amb un factor flotant" @@ -21457,14 +21651,17 @@ msgstr "Aquesta acció no es pot desfer. Continuar?" msgid "Skipping objects." msgstr "Ometent objectes." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Proporció de material" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Alçada del model" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Proporció" msgid "Select Filament" msgstr "Seleccioneu filament" @@ -21749,12 +21946,14 @@ msgid "Drying-Dehumidifying" msgstr "Assecatge - Deshumidificació" # AI Translated -msgid " maximum drying temperature is " -msgstr " la temperatura màxima d'assecatge és " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "La temperatura màxima d'assecatge de %s és %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " la temperatura mínima d'assecatge és " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "La temperatura mínima d'assecatge de %s és %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -22200,6 +22399,97 @@ msgstr "" "Evitar la deformació( warping )\n" "Sabíeu que quan imprimiu materials propensos a deformar-se, com ara l'ABS, augmentar adequadament la temperatura del llit pot reduir la probabilitat de deformació?" +#~ msgid "Other" +#~ msgstr "Altre" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Esquerra: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Dreta: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "La temperatura màxima no pot superar " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "La temperatura mínima no hauria de ser inferior a " + +#~ msgid "up to" +#~ msgstr "fins a" + +#~ msgid "above" +#~ msgstr "sobre" + +#~ msgid "from" +#~ msgstr "des de" + +#~ msgid "Configuration package: " +#~ msgstr "Paquet de configuració: " + +#~ msgid " updated to " +#~ msgstr " actualitzat a " + +#~ msgid "Grouping error: " +#~ msgstr "Error d'agrupació: " + +#~ msgid " can not be placed in the " +#~ msgstr " no es pot col·locar al " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " la temperatura màxima d'assecatge és " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " la temperatura mínima d'assecatge és " + +# AI Translated +#~ msgid "needs" +#~ msgstr "necessita" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "no activat" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "material no publicat" + +#~ msgid "Select the language" +#~ msgstr "Seleccioneu l'idioma" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Seleccionar connector" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direcció en què s'omplen les superfícies superiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n" +#~ "Cap a fora comença al centre de la superfície, de manera que l'excés de material es desplaça cap a la vora, on és menys visible. Cap a dins comença a la vora i acaba amb les corbes tancades del centre.\n" +#~ "Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direcció en què s'omplen les superfícies inferiors quan s'utilitza un patró centrat (Concèntric, Acords d'Arquimedes, Octograma en Espiral).\n" +#~ "Cap a dins comença cada superfície amb les corbes exteriors més amples, cosa que millora l'adherència de la capa inicial en plaques on les corbes tancades del centre poden no adherir-se. Cap a fora comença al centre i desplaça l'excés de material cap a la vora.\n" +#~ "Per defecte utilitza l'ordenació pel camí més curt, que pot anar en qualsevol direcció." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Si està habilitat, la Torre de Purga no s'imprimeix en capes sense canvis d'eina. En capes amb canvi d'eina, l'extrusor es desplaçarà cap avall per imprimir la Torre de Purga. L'usuari és responsable de garantir que no hi hagi col·lisió amb la impressió." + +#~ msgid "This exports settings to a file." +#~ msgstr "Exporta la configuració a un fitxer." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "La visualització en directe nativa de Wayland requereix el sink de vídeo GTK de GStreamer. Instal·leu el connector gtksink per a GStreamer i reinicieu l'OrcaSlicer." diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index f79c90bcd1..9dd405673e 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: Jakub Hencl\n" "Language-Team: \n" @@ -2482,13 +2482,6 @@ msgstr "Je k dispozici aktualizace. Otevřete dialog balíčku předvoleb a prov msgid "%s has been removed." msgstr "%s bylo odstraněno." - -msgid "Select the language" -msgstr "Zvolte jazyk" - -msgid "Language" -msgstr "Jazyk" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3749,11 +3742,15 @@ msgstr "Vytáhnout aktuální filament zpět na Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Přepnout dráhu na Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "Maximální teplota nesmí překročit " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Maximální teplota nesmí překročit %d" -msgid "The minmum temperature should not be less than " -msgstr "Minimální teplota nesmí být nižší než " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Minimální teplota nesmí být nižší než %d" # AI Translated msgid "Type to filter..." @@ -4647,6 +4644,15 @@ msgstr "" "Kopírování dočasného G-kódu do výstupního G-kódu selhalo. Možná je SD karta uzamčená pro zápis?\n" "Chybová zpráva: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Kopírování dočasného G-kódu do výstupního G-kódu selhalo.\n" +"Chybová zpráva: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Kopírování dočasného G-kódu do výstupního G-kódu selhalo. Může být problém s cílovým zařízením, zkuste prosím exportovat znovu nebo použijte jiné zařízení. Poškozený výstupní G-kód je na %1%.tmp." @@ -5385,10 +5391,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Hodnota %s je mimo rozsah. Platný rozsah je od %d do %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Je to %s%% nebo %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Je to %s%% nebo %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5414,22 +5421,18 @@ msgstr "Neplatný formát. Očekávaný vektorový formát: \"%1%\"" msgid "System agents" msgstr "Systémoví agenti" -# AI Translated -msgid "No plugin selected" -msgstr "Není vybrán žádný plugin" - # AI Translated msgid "Add plugin" msgstr "Přidat plugin" -# AI Translated -msgid "Select plugin" -msgstr "Vybrat plugin" - # AI Translated msgid "Remove plugin" msgstr "Odebrat plugin" +# AI Translated +msgid "No plugin selected" +msgstr "Není vybrán žádný plugin" + # AI Translated msgid "Configure" msgstr "Konfigurovat" @@ -5690,14 +5693,20 @@ msgstr "Nastavit optimální" msgid "Regroup filament" msgstr "Znovu seskupit filament" -msgid "up to" -msgstr "až do" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "až do %1% mm" -msgid "above" -msgstr "nad" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "nad %1% mm" -msgid "from" -msgstr "Od" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "od %1% do %2% mm" msgid "Usage" msgstr "Využití" @@ -6063,7 +6072,7 @@ msgstr "Objem:" msgid "Size:" msgstr "Velikost:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Byly nalezeny konflikty drah G-kódu ve vrstvě %d, Z = %.2lf mm. Oddělte prosím konfliktní objekty více od sebe (%s <-> %s)." @@ -6376,11 +6385,13 @@ msgstr "Uložit projekt jako" msgid "Save current project as" msgstr "Uložit aktuální projekt jako" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Publikovat 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Exportovat soubor 3MF s vloženými vybranými nastaveními" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importovat 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7671,6 +7682,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Spodní" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Toto nastavení neurčuje typ schopnosti pluginu." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Toto nastavení určuje neznámý typ schopnosti pluginu: " + # AI Translated msgid "Plugin Selection" msgstr "Výběr pluginů" @@ -8237,11 +8256,13 @@ msgstr "Potvrďte prosím, že je G-code v těchto předvolbách bezpečný, aby msgid "Customized Preset" msgstr "Přizpůsobená předvolba" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Některá publikovaná nastavení nebylo možné použít:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Některé sloty filamentu byly změněny:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Názvy komponent v souboru STEP nejsou ve formátu UTF-8!" @@ -8653,13 +8674,17 @@ msgstr "Uložit rozřezaný soubor jako:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Soubor %s byl odeslán do úložiště tiskárny a lze jej zobrazit na tiskárně." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Publikovat soubor 3MF jako:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Export publikovaného souboru 3MF selhal.\n" +"Zkontrolujte prosím, zda složka existuje online, nebo zda soubor nemají otevřený jiné programy." msgid "Publish" msgstr "Publikovat" @@ -8876,7 +8901,6 @@ msgstr "Chcete pokračovat?" msgid "Language selection" msgstr "Výběr jazyka" - msgid "Asia-Pacific" msgstr "Asie-Pacifik" @@ -8982,6 +9006,9 @@ msgstr "Cesta k aktuální instanci: " msgid "General" msgstr "Obecné" +msgid "Language" +msgstr "Jazyk" + msgid "Metric" msgstr "Metrika" @@ -9444,9 +9471,6 @@ msgstr "Při posouvání posuvníku vrstev v náhledu po slicování vykresluje msgid "Dimmed layer brightness" msgstr "Jas ztmavených vrstev" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9858,63 +9882,80 @@ msgstr "Nahrávání dat" msgid "Jump to webpage" msgstr "Přejít na webovou stránku" +# AI Translated msgid "Material" -msgstr "" +msgstr "Materiál" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Míchaný filament" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Některé míchané filamenty závisejí na filamentech, které nebudou publikovány:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (míchaný)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% vyžaduje %2%, který není povolen." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% vyžaduje %2%, jehož materiál nebude publikován." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Chcete-li publikovat míchaný filament, povolte každý filament, který používá, a zvolte Úplné publikování nebo splňte jeho požadavek Typ." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Přesto publikovat" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Publikovat 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Vyberte, která nastavení se mají publikovat v souboru 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki k publikování 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Videonávod k publikování 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Míchaný filament - publikuje se jako celek, pokud je výše zvoleno \"Povolit\"" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Publikovat tento míchaný filament a povolit + úplně publikovat jeho složkové filamenty" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Publikovat tento slot filamentu v souboru 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Úplné publikování" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Vložit celý filament tohoto slotu do souboru 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtrovat nevybrané" #, c-format, boost-format msgid "Save %s as" @@ -9934,6 +9975,10 @@ msgstr "Zkopíruje do této předvolby všechny hodnoty zděděné z nadřazené msgid "Detach from parent" msgstr "Oddělit od nadřazeného" +# AI Translated +msgid "Save without parent" +msgstr "Uložit bez nadřazeného" + # AI Translated msgid "Unique preset" msgstr "Samostatná předvolba" @@ -10640,9 +10685,17 @@ msgstr "Pro detekci shlukování je vyžadována čistící věž. Bez čistíc msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Povolení přesné výšky Z i čistící věže může způsobit chyby slicování. Chcete přesto povolit přesnou výšku Z?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Plynulý časosběr vyžaduje čistící věž na každé vrstvě, což není slučitelné s možností \"Žádné řídké vrstvy\". Možnost \"Žádné řídké vrstvy\" byla vypnuta." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Pro hladký časosběr je potřeba základní věž. Model může mít vady bez základní věže. Chcete povolit základní věž?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "Možnost \"Žádné řídké vrstvy\" není slučitelná s plynulým časosběrem, který vyžaduje čistící věž na každé vrstvě. Časosběr byl přepnut do tradičního režimu." + msgid "Still print by object?" msgstr "Stále tisknout po objektu?" @@ -11021,10 +11074,6 @@ msgstr "Kompatibilní procesní profily" msgid "Printable space" msgstr "Tisknutelný prostor" -# AI Translated -msgid "Printer Agent" -msgstr "Agent tiskárny" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Vyberte implementaci síťového agenta pro komunikaci s tiskárnou. Dostupní agenti jsou registrováni při spuštění." @@ -11440,14 +11489,6 @@ msgstr "Počet extrudérů" msgid "Capabilities" msgstr "Možnosti" -# AI Translated -msgid "Left: " -msgstr "Levý: " - -# AI Translated -msgid "Right: " -msgstr "Pravý: " - msgid "Show all presets (including incompatible)" msgstr "Zobrazit všechny předvolby (včetně nekompatibilních)" @@ -12339,15 +12380,22 @@ msgstr "Oprava zrušena" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Kopírování souboru %1% do %2% selhalo: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Stahování nových profilů dodavatelů: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Balíček konfigurace: %1% aktualizováno na %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Stažení profilů dodavatelů selhalo: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Nejprve je třeba zkontrolovat neuložené změny před aktualizací konfigurace." -msgid "Configuration package: " -msgstr "Balíček konfigurace: " - -msgid " updated to " -msgstr " aktualizováno na " - msgid "Open G-code file:" msgstr "Otevřít G-code soubor:" @@ -12407,11 +12455,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input Shaping je podporován pouze v Klipperu, RepRapFirmware a Marlinu 2" -msgid "Grouping error: " -msgstr "Chyba seskupení: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Chyba seskupení: %1% nelze umístit do levé trysky" -msgid " can not be placed in the " -msgstr " nelze umístit do " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Chyba seskupení: %1% nelze umístit do pravé trysky" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12526,6 +12578,10 @@ msgstr "%1% je příliš blízko ostatním, může dojít ke kolizím." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% je příliš vysoký, může dojít ke kolizím." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Vzájemná poloha modelu a čistící věže nesplňuje požadavky funkce \"Žádné řídké vrstvy\". Upravte prosím jejich vzájemnou polohu, snižte výšku modelu nebo vypněte možnost \"Žádné řídké vrstvy\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " je příliš blízko oblasti vyloučení, při tisku mohou nastat kolize." @@ -12889,6 +12945,10 @@ msgstr "Použít 3MF místo G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Zapněte, pokud tiskárna přijímá jako tiskovou úlohu soubor 3MF. Je-li zapnuto, odešle Orca Slicer slicovaný soubor jako .gcode.3mf místo prostého souboru .gcode." +# AI Translated +msgid "Printer Agent" +msgstr "Agent tiskárny" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Vyberte implementaci síťového agenta pro komunikaci s tiskárnou." @@ -13952,6 +14012,10 @@ msgstr "Zarovnaná pravoúhlá" msgid "Concentric" msgstr "Koncentrický" +# AI Translated +msgid "Spiral Inset" +msgstr "Spirálový odsaz" + msgid "Hilbert Curve" msgstr "Hilbertova křivka" @@ -14043,13 +14107,13 @@ msgstr "Pořadí vyplňování horního povrchu" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Směr, ve kterém jsou horní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n" -"Ven začíná ve středu povrchu, takže je přebytečný materiál vytlačen k okraji, kde je nejméně viditelný. Dovnitř začíná u okraje a končí těsnými oblouky ve středu.\n" -"Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech." +"Směr, ve kterém se vyplňují horní povrchy při použití vzoru vycházejícího ze středu (Koncentrický, Spirálový odsaz, Archimédovy akordy, Oktagramová spirála).\n" +"Ven začíná ve středu povrchu, takže se přebytečný materiál vytlačuje k okraji, kde je nejméně vidět. Dovnitř začíná u okraje a končí těsnými oblouky ve středu.\n" +"Výchozí používá řazení podle nejkratší cesty, které může probíhat v obou směrech." # AI Translated msgid "Bottom surface fill order" @@ -14057,13 +14121,13 @@ msgstr "Pořadí vyplňování spodního povrchu" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Směr, ve kterém jsou spodní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n" -"Dovnitř začíná každý povrch širšími vnějšími oblouky, což zlepšuje přilnavost první vrstvy na podložkách, kde se těsné oblouky ve středu nemusí přichytit. Ven začíná ve středu a přebytečný materiál vytlačuje k okraji.\n" -"Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech." +"Směr, ve kterém se vyplňují spodní povrchy při použití vzoru vycházejícího ze středu (Koncentrický, Spirálový odsaz, Archimédovy akordy, Oktagramová spirála).\n" +"Dovnitř začíná každý povrch širšími vnějšími oblouky, což zlepšuje přilnavost počáteční vrstvy na podložkách, kde se těsné oblouky ve středu nemusí uchytit. Ven začíná ve středu a vytlačuje přebytečný materiál k okraji.\n" +"Výchozí používá řazení podle nejkratší cesty, které může probíhat v obou směrech." msgid "Internal solid infill pattern" msgstr "Vzor vnitřní plné výplně" @@ -14166,6 +14230,14 @@ msgstr "Proti směru hodinových ručiček" msgid "Clockwise" msgstr "Po směru hodinových ručiček" +# AI Translated +msgid "Distance to rod" +msgstr "Vzdálenost k tyči" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Vodorovná vzdálenost špičky trysky ke vzdálenější hraně tyče. Používá se pro vyhýbání se kolizím při tisku podle objektu." + msgid "Height to rod" msgstr "Výška k tyči" @@ -16362,6 +16434,20 @@ msgstr "Detekovat převislou stěnu" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Detekuje procento převisu vzhledem k šířce čáry a použije odlišnou rychlost tisku. Pro 100%% převis je použita rychlost mostů." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Tisknout nepodepřené stěny jako poslední" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Smyčky stěn, které leží zcela ve vzduchu, se tisknou až ve chvíli, kdy je má co udržet:\n" +"extrudují se po ostatních stěnách svého ostrůvku, nejprve ta nejvnitřnější, bez ohledu na pořadí stěn.\n" +"Smyčka, kterou dokážou ukotvit pouze můstky této vrstvy, čeká, až budou tyto můstky vytištěny, zatímco smyčka vedoucí podél podepřené stěny si ponechá své místo před výplní, která ji potřebuje jako ukotvení." + # AI Translated msgid "Outer walls" msgstr "Vnější stěny" @@ -16806,6 +16892,39 @@ msgstr "Očištění na okruzích" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Pro minimalizaci viditelnosti stehu v uzavřené smyčce extruze je před opuštěním smyčky tryskou proveden malý pohyb směrem dovnitř." +# AI Translated +msgid "Wipe inward" +msgstr "Očištění dovnitř" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Platí pouze pro vnější stěny včetně obrysů otvorů. Během očištění posouvá horkou trysku směrem k již vytištěným vnitřním stěnám, aby se omezilo opětovné zahřívání čerstvě vytištěného plastu a stopy po švu.\n" +"\n" +"Obzvláště užitečné při výškách vrstvy pod 0,1 mm, kde jsou stopy po očištění výraznější.\n" +"\n" +"Použije běžné očištění, pokud není žádná sousední vnitřní stěna již vytištěná (oblasti s jedinou stěnou nebo pořadí stěn Vnější/Vnitřní) nebo pokud nelze najít podepřenou dráhu dovnitř, například v ostrých rozích nebo v mezerách švu." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Vzdálenost očištění dovnitř" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Vzdálenost, o kterou se dráha očištění posune od vnějšího obvodu, uvedená v milimetrech nebo jako procento skutečné šířky extruze vnější stěny.\n" +"\n" +"Například 50% posune dráhu o polovinu šířky vnější stěny. Účinný posun je omezen jak skutečnou šířkou vnější stěny, tak dostupnou mezerou k sousední stěně, takže hodnoty nad 100% nebo odpovídající absolutní vzdálenost už nemají další účinek. Nastavením na 0 posun vypnete." + msgid "Wipe before external loop" msgstr "Očištění před vnějším okruhem" @@ -17073,8 +17192,9 @@ msgstr "Vyzvedne nový nástroj, aniž by čekal na dosažení tiskové teploty, msgid "No sparse layers (beta)" msgstr "Žádné řídké vrstvy (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Je-li povoleno, věž na očištění trysky se nebude tisknout na vrstvách bez změny nástroje. Na vrstvách s výměnou nástroje pojede extruder dolů k tisku věže na očištění trysky. Uživatel je zodpovědný za zajištění, že nedojde ke kolizi s tiskem." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Pokud je povoleno, čistící věž se nebude tisknout na vrstvách bez změny nástroje. Na vrstvách se změnou nástroje extruder sjede dolů, aby čistící věž vytiskl, takže věž skončí pod modelem a tisková hlava k ní musí dosáhnout dolů. Rozvržení, kde by to znamenalo kolizi s již vytištěným objektem, jsou odmítnuta. Nemá vliv při plynulém časosběru ani při detekci nánosů na trysce, které vyžadují věž na každé vrstvě." msgid "Prime all printing extruders" msgstr "Připravit všechny tiskové extrudery" @@ -17100,6 +17220,34 @@ msgstr "" msgid "Cyclic" msgstr "Cyklické" +# AI Translated +msgid "Cyclic order" +msgstr "Cyklické pořadí" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Vlastní posloupnost filamentů použitá cyklickým řazením změn nástroje, jako čísla filamentů oddělená čárkami (např. \"3,2,1,4\").\n" +"Každá vrstva tiskne své filamenty podle této posloupnosti; filamenty, které v ní nejsou uvedeny, se tisknou jako poslední, ve vzestupném pořadí.\n" +"Ponechte prázdné, chcete-li filamenty procházet ve vzestupném pořadí." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Použít cyklické pořadí na počáteční vrstvu" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Použije cyklické pořadí změn nástroje také na počáteční vrstvu.\n" +"Ve výchozím nastavení je vypnuto, protože počáteční vrstva se místo toho řadí pro nejlepší přilnavost k podložce: filamenty, které tisknou malé, křehké prvky počáteční vrstvy, se tisknou jako poslední, takže následné změny nástroje a přejezdy tyto slabě ukotvené části s menší pravděpodobností urazí. Toto pořadí počáteční vrstvy také respektuje vlastní posloupnost filamentů pro počáteční vrstvu, je-li nastavena. Přínos cyklického pořadí (další změny nástroje dávají každé vrstvě více času na vychladnutí) se na počáteční vrstvu nevztahuje, protože se tiskne pomalu a horká kvůli přilnavosti.\n" +"Povolte to pouze tehdy, pokud potřebujete přesně stejnou posloupnost nástrojů na každé vrstvě včetně první, za cenu této optimalizace přilnavosti." + msgid "Slice gap closing radius" msgstr "Poloměr uzavření mezery řezu" @@ -17109,9 +17257,6 @@ msgstr "Trhliny menší než 2x poloměr uzavření mezery jsou při řezání t msgid "Slicing Mode" msgstr "Režim slicingu" -msgid "Other" -msgstr "Ostatní" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Použijte \"Sudý-lichý\" pro modely letadel 3DLabPrint. Použijte \"Zavřít díry\" pro uzavření všech otvorů v modelu." @@ -18111,6 +18256,14 @@ msgstr "Bez kontroly" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Nespouštějte žádné kontroly platnosti, například kontrolu konfliktů dráhy G-kódu." +# AI Translated +msgid "Strict mode" +msgstr "Přísný režim" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Skončí s nenulovým návratovým kódem, pokud slicování vyvolá nekritické varování, které by se jinak pouze zapsalo do protokolu, například model vyžadující podpory, zatímco jsou podpory vypnuté. Použijte v CI nebo ve skriptovaných procesech, které nikdy nesmí dodat nenápadně vadný výsledek slicování. Každé takové varování je navíc uvedeno se stabilní třídou v poli `warnings` souboru result.json, který se zapisuje pouze na Linuxu. Nelze kombinovat s --no-check, který přeskakuje kontrolu podpor." + msgid "Normative check" msgstr "Normativní kontrola" @@ -18123,11 +18276,28 @@ msgstr "Informace o výstupním modelu" msgid "This outputs the model’s information." msgstr "Zobrazit informace o modelu." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Prozkoumat síť (JSON na stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Vypíše na stdout souhrn JSON pro každý načtený objekt a poté skončí: jeho ohraničující kvádry a stěny konvexní obálky, na které jej lze položit, včetně jejich normál, obsahů a středů. Právě z těchto stěn vybírají volby --ground-*. Strojově čitelná alternativa k --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Prozkoumat malování (JSON na stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Vypíše strukturovaný souhrn JSON každé malované vrstvy (podpory, šev, barva MMU, fuzzy skin) již uložené v načteném modelu — počet facet, plochu povrchu a ohraničující kvádr v souřadnicích sítě pro každý stav — a poté skončí. Strojově čitelná alternativa k otevření malovacích nástrojů v rozhraní." + msgid "Export Settings" msgstr "Exportovat nastavení" -msgid "This exports settings to a file." -msgstr "Exportovat nastavení do souboru." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Toto exportuje nastavení do souboru. Použijte - pro zápis na stdout." msgid "Send progress to pipe" msgstr "Odesílat průběh do pipe" @@ -18183,6 +18353,30 @@ msgstr "Otočit kolem osy Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Úhel rotace kolem osy Y ve stupních." +# AI Translated +msgid "Ground largest face" +msgstr "Položit na největší stěnu" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Položí každý objekt na největší stěnu jeho konvexní obálky a spustí jej na podložku. Ze stejně velkých stěn se zachová ta, která již směřuje dolů. Objekty bez stěny dostatečně velké na to, aby na ní mohly spočívat, zůstanou beze změny. Transformace se provádějí v pořadí zadání na příkazové řádce, takže rotace uvedené před touto volbou jsou respektovány. --orient 1 se spouští po všech transformacích a nahrazuje orientaci." + +# AI Translated +msgid "Ground face by normal" +msgstr "Položit na stěnu podle normály" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Položí každý objekt na tu stěnu konvexní obálky, jejíž vnější normála je nejblíže směru NX,NY,NZ, a spustí jej na podložku. Směr je v souřadnicích objektu, které zahrnují rotace uvedené před touto volbou a odpovídají osám podložky, pokud vstupní soubor objekt neotáčí. Například 1,0,0 postaví objekt na jeho stranu +X. --orient 1 se spouští po všech transformacích a nahrazuje orientaci." + +# AI Translated +msgid "Ground face at point" +msgstr "Položit na stěnu v bodě" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Položí každý objekt na tu stěnu konvexní obálky, která obsahuje bod X,Y,Z, a spustí jej na podložku. Bod je v souřadnicích objektu, které zahrnují rotace uvedené před touto volbou; --inspect-mesh uvádí středy stěn v těchto souřadnicích. Objekty bez takové stěny zůstanou beze změny a běh selže, pokud ji nemá žádný objekt. --orient 1 se spouští po všech transformacích a nahrazuje orientaci." + msgid "Scale the model by a float factor." msgstr "Změnit měřítko modelu podle desetinného faktoru." @@ -21401,14 +21595,17 @@ msgstr "Tuto akci nelze vrátit zpět. Pokračovat?" msgid "Skipping objects." msgstr "Přeskakování objektů." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Poměr materiálu" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Výška modelu" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Poměr" # AI Translated msgid "Select Filament" @@ -21724,12 +21921,14 @@ msgid "Drying-Dehumidifying" msgstr "Sušení – odvlhčování" # AI Translated -msgid " maximum drying temperature is " -msgstr " maximální teplota sušení je " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Maximální teplota sušení pro %s je %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " minimální teplota sušení je " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Minimální teplota sušení pro %s je %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -22181,6 +22380,97 @@ msgstr "" "Zamezte kroucení\n" "Víte, že při tisku materiálů náchylných ke kroucení, jako je ABS, může vhodné zvýšení teploty vyhřívané desky snížit pravděpodobnost kroucení?" +#~ msgid "Other" +#~ msgstr "Ostatní" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Levý: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Pravý: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Maximální teplota nesmí překročit " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Minimální teplota nesmí být nižší než " + +#~ msgid "up to" +#~ msgstr "až do" + +#~ msgid "above" +#~ msgstr "nad" + +#~ msgid "from" +#~ msgstr "Od" + +#~ msgid "Configuration package: " +#~ msgstr "Balíček konfigurace: " + +#~ msgid " updated to " +#~ msgstr " aktualizováno na " + +#~ msgid "Grouping error: " +#~ msgstr "Chyba seskupení: " + +#~ msgid " can not be placed in the " +#~ msgstr " nelze umístit do " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " maximální teplota sušení je " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " minimální teplota sušení je " + +# AI Translated +#~ msgid "needs" +#~ msgstr "vyžaduje" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "není povoleno" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "materiál není publikován" + +#~ msgid "Select the language" +#~ msgstr "Zvolte jazyk" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Vybrat plugin" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Směr, ve kterém jsou horní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n" +#~ "Ven začíná ve středu povrchu, takže je přebytečný materiál vytlačen k okraji, kde je nejméně viditelný. Dovnitř začíná u okraje a končí těsnými oblouky ve středu.\n" +#~ "Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Směr, ve kterém jsou spodní povrchy vyplňovány při použití vzoru vycházejícího ze středu (Koncentrický, Archimédovy akordy, Oktagramová spirála).\n" +#~ "Dovnitř začíná každý povrch širšími vnějšími oblouky, což zlepšuje přilnavost první vrstvy na podložkách, kde se těsné oblouky ve středu nemusí přichytit. Ven začíná ve středu a přebytečný materiál vytlačuje k okraji.\n" +#~ "Výchozí používá řazení podle nejkratší dráhy, které může probíhat v obou směrech." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Je-li povoleno, věž na očištění trysky se nebude tisknout na vrstvách bez změny nástroje. Na vrstvách s výměnou nástroje pojede extruder dolů k tisku věže na očištění trysky. Uživatel je zodpovědný za zajištění, že nedojde ke kolizi s tiskem." + +#~ msgid "This exports settings to a file." +#~ msgstr "Exportovat nastavení do souboru." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Nativní živý náhled ve Waylandu vyžaduje video sink GStreamer GTK. Nainstalujte prosím plugin gtksink pro GStreamer a poté restartujte OrcaSlicer." diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 2a3e4e19d6..a4909c409b 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -2430,13 +2430,6 @@ msgstr "Es ist ein Update verfügbar. Öffnen Sie den Profilbündel-Dialog, um e msgid "%s has been removed." msgstr "%s wurde entfernt." - -msgid "Select the language" -msgstr "Sprache wählen" - -msgid "Language" -msgstr "Sprache" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3678,11 +3671,15 @@ msgstr "Aktuelles Filament am Filament Track Switch zurückziehen" msgid "Switch track at Filament Track Switch" msgstr "Spur am Filament Track Switch wechseln" -msgid "The maximum temperature cannot exceed " -msgstr "Die maximale Temperatur darf nicht überschritten werden " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Die maximale Temperatur darf %d nicht überschreiten" -msgid "The minmum temperature should not be less than " -msgstr "Die minimale Temperatur sollte nicht weniger als " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Die minimale Temperatur darf %d nicht unterschreiten" msgid "Type to filter..." msgstr "Tippen zum Filtern..." @@ -4554,6 +4551,15 @@ msgstr "" "Das Kopieren des temporären G-Codes in den Ausgabe-G-Code ist fehlgeschlagen. Ist die SD-Karte schreibgeschützt?\n" "Fehlermeldung: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Das Kopieren des temporären G-Codes in den Ausgabe-G-Code ist fehlgeschlagen.\n" +"Fehlermeldung: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Das Kopieren des temporären G-Codes in den Ausgabe-G-Code ist fehlgeschlagen. Es könnte ein Problem mit dem Zielgerät geben. Versuchen Sie es erneut oder verwenden Sie ein anderes Gerät. Der beschädigte Ausgabe-G-Code befindet sich in %1%.tmp." @@ -5290,10 +5296,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Wert %s ist außerhalb des Bereichs. Der gültige Bereich liegt zwischen %d und %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Heißt es %s%% oder %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Heißt es %s%% oder %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5319,22 +5326,18 @@ msgstr "Ungültiges Format. Erwartetes Vektorformat: \"%1%\"" msgid "System agents" msgstr "Systemagenten" -# AI Translated -msgid "No plugin selected" -msgstr "Kein Plugin ausgewählt" - # AI Translated msgid "Add plugin" msgstr "Plugin hinzufügen" -# AI Translated -msgid "Select plugin" -msgstr "Plugin auswählen" - # AI Translated msgid "Remove plugin" msgstr "Plugin entfernen" +# AI Translated +msgid "No plugin selected" +msgstr "Kein Plugin ausgewählt" + # AI Translated msgid "Configure" msgstr "Konfigurieren" @@ -5590,14 +5593,20 @@ msgstr "Auf optimal setzen" msgid "Regroup filament" msgstr "Filament neu gruppieren" -msgid "up to" -msgstr "bis zu" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "bis zu %1% mm" -msgid "above" -msgstr "über" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "über %1% mm" -msgid "from" -msgstr "von" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "von %1% bis %2% mm" msgid "Usage" msgstr "Nutzung" @@ -5957,7 +5966,7 @@ msgstr "Volumen:" msgid "Size:" msgstr "Größe:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Konflikte von G-Code-Pfaden wurden bei Layer %d, Z = %.2lf mm gefunden.Bitte trennen Sie die konfliktbehafteten Objekte weiter voneinander (%s <-> %s)." @@ -6268,11 +6277,13 @@ msgstr "Projekt speichern als" msgid "Save current project as" msgstr "Aktuelles Projekt speichern als" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "3MF veröffentlichen" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Eine 3MF-Datei mit den ausgewählten eingebetteten Einstellungen exportieren" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importiere 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7541,6 +7552,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Untere" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Diese Einstellung gibt keinen Plugin-Fähigkeitstyp an." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Diese Einstellung gibt einen unbekannten Plugin-Fähigkeitstyp an: " + # AI Translated msgid "Plugin Selection" msgstr "Plugin-Auswahl" @@ -8107,11 +8126,13 @@ msgstr "Bitte bestätigen Sie, dass die G-Codes innerhalb dieser Profile sicher msgid "Customized Preset" msgstr "Benutzerdefinierte Profile" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Einige veröffentlichte Einstellungen konnten nicht angewendet werden:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Einige Filament-Steckplätze wurden geändert:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Der Name der Komponenten in der Step-Datei ist nicht im UTF-8-Format!" @@ -8525,13 +8546,17 @@ msgstr "Geslicte Datei speichern unter:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Die Datei %s wurde an den Speicher des Druckers gesendet und kann auf dem Drucker angezeigt werden." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "3MF-Datei veröffentlichen als:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Die veröffentlichte 3MF-Datei konnte nicht exportiert werden.\n" +"Bitte prüfen Sie, ob der Ordner online liegt oder ob andere Programme die Datei geöffnet haben." msgid "Publish" msgstr "Veröffentlichen" @@ -8748,7 +8773,6 @@ msgstr "Möchten Sie fortfahren?" msgid "Language selection" msgstr "Sprachauswahl" - msgid "Asia-Pacific" msgstr "Asien-Pazifik" @@ -8853,6 +8877,9 @@ msgstr "Aktueller Instanzpfad: " msgid "General" msgstr "Allgemein" +msgid "Language" +msgstr "Sprache" + msgid "Metric" msgstr "Metrisch" @@ -9291,9 +9318,6 @@ msgstr "Beim Bewegen des Schichtreglers in der geslicten Vorschau werden die Sch msgid "Dimmed layer brightness" msgstr "Helligkeit abgedunkelter Schichten" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9692,63 +9716,80 @@ msgstr "Daten werden hochgeladen" msgid "Jump to webpage" msgstr "Zu einer Website springen" +# AI Translated msgid "Material" -msgstr "" +msgstr "Material" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Mischfilament" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Einige Mischfilamente benötigen Filamente, die nicht veröffentlicht werden:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (gemischt)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% benötigt %2%, das nicht aktiviert ist." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% benötigt %2%, dessen Material nicht veröffentlicht wird." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Um ein Mischfilament zu veröffentlichen, aktivieren Sie jedes von ihm verwendete Filament und wählen Sie Vollständig veröffentlichen oder erfüllen Sie dessen Typ-Anforderung." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Trotzdem veröffentlichen" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "3MF veröffentlichen..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Wählen Sie aus, welche Einstellungen in der 3MF-Datei veröffentlicht werden" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki: 3MF veröffentlichen" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Videoanleitung: 3MF veröffentlichen" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Mischfilament - wird als Ganzes veröffentlicht, wenn oben \"Aktivieren\" ausgewählt ist" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Dieses Mischfilament veröffentlichen und seine Komponentenfilamente aktivieren + vollständig veröffentlichen" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Diesen Filament-Steckplatz in der 3MF-Datei veröffentlichen" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Vollständig veröffentlichen" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Das gesamte Filament dieses Steckplatzes in die 3MF-Datei einbetten" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Nicht ausgewählte filtern" #, c-format, boost-format msgid "Save %s as" @@ -9767,6 +9808,10 @@ msgstr "Kopiert alle vom übergeordneten Profil geerbten Werte in dieses Profil msgid "Detach from parent" msgstr "Vom übergeordneten Element trennen" +# AI Translated +msgid "Save without parent" +msgstr "Ohne übergeordnetes Element speichern" + # AI Translated msgid "Unique preset" msgstr "Eigenständiges Profil" @@ -10467,9 +10512,17 @@ msgstr "Reinigungsturm ist für die Erkennung von Klumpen erforderlich. Ohne Rei msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Das Aktivieren von sowohl präziser Z-Höhe als auch Reinigungsturm kann zu Slicing-Fehlern führen. Möchten Sie trotzdem die präzise Z-Höhe aktivieren?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Der Smooth-Zeitraffer benötigt auf jeder Schicht einen Reinigungsturm und ist daher nicht mit \"Keine dünnen Schichten\" kompatibel. \"Keine dünnen Schichten\" wurde deaktiviert." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Für den gewählten Zeitraffermodus ist ein Reinigungsturm erforderlich. Ohne Reinigungsturm kann es zu Fehlern am Modell kommen. Möchten Sie den Reinigungsturm aktivieren?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Keine dünnen Schichten\" ist nicht mit dem Smooth-Zeitraffer kompatibel, der auf jeder Schicht einen Reinigungsturm benötigt. Der Zeitraffer wurde auf den traditionellen Modus umgestellt." + msgid "Still print by object?" msgstr "Trotzdem nach Objekt drucken?" @@ -10839,9 +10892,6 @@ msgstr "Kompatible Prozessprofile" msgid "Printable space" msgstr "Druckbarer Raum" -msgid "Printer Agent" -msgstr "Drucker-Agent" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Wählen Sie die Implementierung des Netzwerkagenten für die Druckerkommunikation. Verfügbare Agenten werden beim Start registriert." @@ -11243,12 +11293,6 @@ msgstr "Anzahl der Extruder" msgid "Capabilities" msgstr "Fähigkeiten" -msgid "Left: " -msgstr "Links: " - -msgid "Right: " -msgstr "Rechts: " - msgid "Show all presets (including incompatible)" msgstr "Alle Profile anzeigen (auch inkompatible)" @@ -12086,15 +12130,22 @@ msgstr "Reparatur abgebrochen" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Kopieren der Datei %1% nach %2% fehlgeschlagen: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Neue Herstellerprofile werden heruntergeladen: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Konfigurationspaket: %1% aktualisiert auf %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Herstellerprofile konnten nicht heruntergeladen werden: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Vor der Aktualisierung der Konfiguration müssen die nicht gespeicherten Änderungen überprüft werden." -msgid "Configuration package: " -msgstr "Konfigurationspaket:" - -msgid " updated to " -msgstr " aktualisiert auf " - msgid "Open G-code file:" msgstr "Öffne G-Code-Datei:" @@ -12154,11 +12205,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input Shaping wird nur von Klipper, RepRapFirmware und Marlin 2 unterstützt" -msgid "Grouping error: " -msgstr "Gruppierungsfehler: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Gruppierungsfehler: %1% kann nicht in der linken Düse platziert werden" -msgid " can not be placed in the " -msgstr " kann nicht platziert werden in der " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Gruppierungsfehler: %1% kann nicht in der rechten Düse platziert werden" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12272,6 +12327,10 @@ msgstr "%1% ist zu nah an anderen, was Kollisionen verursachen kann." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% ist zu hoch und es kommt zu Kollisionen." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Die relative Position von Modell und Reinigungsturm erfüllt nicht die Anforderungen der Funktion \"Keine dünnen Schichten\". Bitte passen Sie ihre relative Position an, verringern Sie die Modellhöhe oder deaktivieren Sie \"Keine dünnen Schichten\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " befindet sich zu nahe an einem Sperrbereich. Beim Drucken kann es zu Kollisionen kommen." @@ -12617,6 +12676,9 @@ msgstr "Benutze 3MF statt G-Code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Aktivieren Sie diese Option, wenn der Drucker eine 3MF-Datei als Druckauftrag akzeptiert. Wenn aktiviert, sendet Orca Slicer die geslicete Datei als .gcode.3mf, anstatt als einfache .gcode-Datei." +msgid "Printer Agent" +msgstr "Drucker-Agent" + msgid "Select the network agent implementation for printer communication." msgstr "Wählen Sie die Netzwerk-Agent-Implementierung für die Druckerkommunikation aus." @@ -13661,6 +13723,10 @@ msgstr "Geradlinig ausgerichtet" msgid "Concentric" msgstr "Konzentrisch" +# AI Translated +msgid "Spiral Inset" +msgstr "Spiralversatz" + msgid "Hilbert Curve" msgstr "Hilbert-Kurve" @@ -13752,13 +13818,13 @@ msgstr "Füllreihenfolge der oberen Oberfläche" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Richtung, in der obere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n" -"Nach außen beginnt in der Mitte der Oberfläche, sodass überschüssiges Material zum Rand geschoben wird, wo es am wenigsten sichtbar ist. Nach innen beginnt am Rand und endet mit den engen Kurven in der Mitte.\n" -"Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann." +"Richtung, in der obere Flächen gefüllt werden, wenn ein zentrumsbasiertes Muster verwendet wird (Konzentrisch, Spiralversatz, Archimedische Akkorde, Oktagramm Spirale).\n" +"Nach außen beginnt in der Mitte der Fläche, sodass überschüssiges Material zum Rand gedrückt wird, wo es am wenigsten sichtbar ist. Nach innen beginnt am Rand und endet mit den engen Kurven in der Mitte.\n" +"Standard verwendet die Reihenfolge des kürzesten Weges, die in beide Richtungen verlaufen kann." # AI Translated msgid "Bottom surface fill order" @@ -13766,13 +13832,13 @@ msgstr "Füllreihenfolge der unteren Oberfläche" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Richtung, in der untere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n" -"Nach innen beginnt jede Oberfläche mit den breiteren äußeren Kurven, was die Haftung der ersten Schicht auf Druckbetten verbessert, auf denen die engen Kurven in der Mitte möglicherweise nicht haften. Nach außen beginnt in der Mitte und schiebt überschüssiges Material zum Rand.\n" -"Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann." +"Richtung, in der untere Flächen gefüllt werden, wenn ein zentrumsbasiertes Muster verwendet wird (Konzentrisch, Spiralversatz, Archimedische Akkorde, Oktagramm Spirale).\n" +"Nach innen beginnt jede Fläche mit den weiteren äußeren Kurven, was die Haftung der ersten Schicht auf Druckbetten verbessert, auf denen die engen Kurven in der Mitte möglicherweise nicht haften. Nach außen beginnt in der Mitte und drückt überschüssiges Material zum Rand.\n" +"Standard verwendet die Reihenfolge des kürzesten Weges, die in beide Richtungen verlaufen kann." msgid "Internal solid infill pattern" msgstr "Muster für das interne feste Füllmuster" @@ -13875,6 +13941,14 @@ msgstr "Gegen den Uhrzeigersinn" msgid "Clockwise" msgstr "Im Uhrzeigersinn" +# AI Translated +msgid "Distance to rod" +msgstr "Abstand zur Stange" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Horizontaler Abstand der Düsenspitze zur entfernteren Kante der Stange. Wird zur Kollisionsvermeidung beim Drucken nach Objekt verwendet." + msgid "Height to rod" msgstr "Höhe zur Führung" @@ -16028,6 +16102,20 @@ msgstr "Erkennen von Wandüberhängen" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Erkennt den Prozentsatz des Überhangs im Verhältnis zur Linienbreite und verwenden hierfür eine unterschiedliche Druckgeschwindigkeiten. Bei einem 100%% Überhang wird die Brückengeschwindigkeit verwendet." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Nicht gestützte Wände zuletzt drucken" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Wandschleifen, die vollständig in der Luft liegen, werden erst gedruckt, wenn etwas sie halten kann:\n" +"Sie werden nach den übrigen Wänden ihrer Insel extrudiert, die innerste zuerst, unabhängig von der Wandreihenfolge.\n" +"Eine Schleife, die nur von den Überbrückungen dieser Schicht verankert werden kann, wartet, bis diese Überbrückungen gedruckt sind, während eine Schleife, die neben einer gestützten Wand verläuft, ihren Platz vor der Füllung behält, die sie als Verankerung benötigt." + msgid "Outer walls" msgstr "Äußere Wände" @@ -16469,6 +16557,39 @@ msgstr "Wischbewegung nach innen" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Um die Sichtbarkeit der Naht in einer geschlossenen Schleifen-Extrusion zu minimieren, wird vor dem Verlassen der Schleife eine kleine Bewegung nach innen ausgeführt." +# AI Translated +msgid "Wipe inward" +msgstr "Reinigen nach innen" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Gilt nur für Außenwände, einschließlich Lochkonturen. Bewegt die heiße Düse beim Reinigen in Richtung bereits gedruckter innerer Wände, um das erneute Aufschmelzen frisch gedruckten Kunststoffs und Nahtmarkierungen zu verringern.\n" +"\n" +"Besonders nützlich bei Schichthöhen unter 0,1 mm, wo Reinigungsspuren deutlicher sichtbar sind.\n" +"\n" +"Verwendet die normale Reinigung, wenn keine angrenzende innere Wand bereits gedruckt ist (Bereiche mit nur einer Wand oder die Wandreihenfolge Außen/Innen) oder wenn kein gestützter Weg nach innen gefunden werden kann, zum Beispiel an engen Ecken oder Nahtlücken." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Abstand für Reinigen nach innen" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Der Abstand, um den der Reinigungsweg vom Außenperimeter weg verschoben wird, angegeben in Millimetern oder als Prozentsatz der tatsächlichen Extrusionsbreite der Außenwand.\n" +"\n" +"Zum Beispiel verschiebt 50% den Weg um die halbe Außenwandbreite. Der wirksame Versatz wird sowohl durch die tatsächliche Außenwandbreite als auch durch den verfügbaren Abstand zur benachbarten Wand begrenzt, sodass Werte über 100% oder ein entsprechender absoluter Abstand keine zusätzliche Wirkung haben. Auf 0 setzen, um den Versatz zu deaktivieren." + msgid "Wipe before external loop" msgstr "Wischbewegung vor äußerer Schleife" @@ -16731,8 +16852,9 @@ msgstr "Nimmt das neue Werkzeug auf, ohne auf das Erreichen der Drucktemperatur msgid "No sparse layers (beta)" msgstr "Keine dünnen Schichten (Beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Wenn aktiviert, wird der Reinigungsturm nicht auf Schichten ohne Werkzeugwechsel gedruckt. Auf Schichten mit einem Werkzeugwechsel wird der Extruder nach unten fahren, um den Reinigungsturm zu drucken. Der Benutzer ist dafür verantwortlich, dass es keine Kollision mit dem Druck gibt." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Wenn aktiviert, wird der Reinigungsturm auf Schichten ohne Werkzeugwechsel nicht gedruckt. Auf Schichten mit einem Werkzeugwechsel fährt der Extruder nach unten, um den Reinigungsturm zu drucken, sodass der Turm unterhalb des Modells endet und der Werkzeugkopf zu ihm hinuntergreifen muss. Anordnungen, bei denen das mit einem bereits gedruckten Objekt kollidieren würde, werden abgelehnt. Hat keine Wirkung beim Smooth-Zeitraffer oder bei der Düsenverstopfungserkennung, die auf jeder Schicht einen Turm benötigen." msgid "Prime all printing extruders" msgstr "Reinige alle Druckextruder" @@ -16758,6 +16880,34 @@ msgstr "" msgid "Cyclic" msgstr "Zyklisch" +# AI Translated +msgid "Cyclic order" +msgstr "Zyklische Reihenfolge" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Benutzerdefinierte Filamentreihenfolge für die zyklische Werkzeugwechsel-Reihenfolge, als durch Kommas getrennte Filamentnummern (z. B. \"3,2,1,4\").\n" +"Jede Schicht druckt ihre Filamente in dieser Reihenfolge; nicht aufgeführte Filamente werden zuletzt gedruckt, in aufsteigender Reihenfolge.\n" +"Leer lassen, um die Filamente in aufsteigender Reihenfolge zu durchlaufen." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Zyklische Reihenfolge auf erste Schicht anwenden" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Wendet die zyklische Werkzeugwechsel-Reihenfolge auch auf die erste Schicht an.\n" +"Standardmäßig ist dies deaktiviert, weil die erste Schicht stattdessen für die beste Druckbetthaftung sortiert wird: Filamente, die kleine, empfindliche Elemente der ersten Schicht drucken, werden zuletzt gedruckt, sodass die folgenden Werkzeugwechsel und Eilgänge diese schwach verankerten Teile seltener losreißen. Diese Reihenfolge der ersten Schicht berücksichtigt auch eine benutzerdefinierte Filamentreihenfolge für die erste Schicht, sofern eine festgelegt ist. Der Vorteil der zyklischen Reihenfolge (zusätzliche Werkzeugwechsel geben jeder Schicht mehr Zeit zum Abkühlen) gilt nicht für die erste Schicht, die für die Haftung langsam und heiß gedruckt wird.\n" +"Aktivieren Sie dies nur, wenn Sie auf jeder Schicht einschließlich der ersten exakt dieselbe Werkzeugreihenfolge benötigen, auf Kosten dieser Haftungsoptimierung." + msgid "Slice gap closing radius" msgstr "Slice-Lückenschlussradius" @@ -16767,9 +16917,6 @@ msgstr "Risse, die kleiner als das 2-fache des Lückenschlussradius sind, werden msgid "Slicing Mode" msgstr "Slicing-Modus" -msgid "Other" -msgstr "Sonstiges" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Verwenden Sie \"Gerade-ungerade\" für 3DLabPrint-Flugzeugmodelle. Verwenden Sie \"Löcher schließen\", um alle Löcher im Modell zu schließen." @@ -17760,6 +17907,14 @@ msgstr "Keine Überprüfung" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Führe keine Gültigkeitsprüfungen durch, wie beispielsweise die Überprüfung von G-Code-Pfadkonflikten." +# AI Translated +msgid "Strict mode" +msgstr "Strikter Modus" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Beendet sich mit einem Rückgabewert ungleich null, wenn das Slicen eine nicht kritische Warnung auslöst, die sonst nur protokolliert wird, etwa ein Modell, das Stützen benötigt, während Stützen deaktiviert sind. Verwenden Sie dies in CI- oder Skript-Pipelines, die niemals einen unbemerkt fehlerhaften Slice ausliefern sollen. Jede solche Warnung wird zusätzlich mit einer stabilen Klasse im Array `warnings` von result.json aufgeführt, das nur unter Linux geschrieben wird. Kann nicht mit --no-check kombiniert werden, das die Stützenprüfung überspringt." + msgid "Normative check" msgstr "Normative Überprüfung" @@ -17772,11 +17927,28 @@ msgstr "Ausgabe Modellinformationen" msgid "This outputs the model’s information." msgstr "Geben Sie die Informationen des Modells aus." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Mesh prüfen (JSON nach stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Gibt eine JSON-Zusammenfassung jedes geladenen Objekts nach stdout aus und beendet sich dann: seine Begrenzungsrahmen und die Flächen der konvexen Hülle, auf die es gelegt werden kann, mit deren Normalen, Flächeninhalten und Mittelpunkten. Dies sind die Flächen, aus denen die Optionen --ground-* auswählen. Maschinenlesbare Alternative zu --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Bemalung prüfen (JSON nach stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Gibt eine strukturierte JSON-Zusammenfassung jeder bereits im geladenen Modell gespeicherten Bemalungsebene (Stützen, Naht, MMU-Farbe, Fuzzy skin) aus — Facettenanzahl, Oberfläche und mesh-lokaler Begrenzungsrahmen je Zustand — und beendet sich dann. Maschinenlesbare Alternative zum Öffnen der Mal-Gizmos in der Benutzeroberfläche." + msgid "Export Settings" msgstr "Einstellungen exportieren" -msgid "This exports settings to a file." -msgstr "Einstellungen in eine Datei exportieren." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Exportiert die Einstellungen in eine Datei. Verwenden Sie -, um sie nach stdout zu schreiben." msgid "Send progress to pipe" msgstr "Fortschritt an die Leitung senden" @@ -17832,6 +18004,30 @@ msgstr "Rotieren um Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Rotationswinkel um die Y-Achse in Grad." +# AI Translated +msgid "Ground largest face" +msgstr "Auf größte Fläche legen" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Legt jedes Objekt auf die größte Fläche seiner konvexen Hülle und lässt es auf das Druckbett fallen. Bei gleich großen Flächen wird die bereits nach unten zeigende beibehalten. Objekte ohne eine ausreichend große Auflagefläche bleiben unverändert. Transformationen werden in der Reihenfolge der Befehlszeile ausgeführt, sodass vor dieser Option angegebene Drehungen berücksichtigt werden. --orient 1 läuft nach allen Transformationen und ersetzt die Ausrichtung." + +# AI Translated +msgid "Ground face by normal" +msgstr "Auf Fläche nach Normale legen" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Legt jedes Objekt auf die Fläche der konvexen Hülle, deren äußere Normale der Richtung NX,NY,NZ am nächsten kommt, und lässt es auf das Druckbett fallen. Die Richtung ist in Objektkoordinaten angegeben, die die vor dieser Option angegebenen Drehungen enthalten und den Achsen des Druckbetts entsprechen, sofern die Eingabedatei das Objekt nicht dreht. Zum Beispiel stellt 1,0,0 das Objekt auf seine +X-Seite. --orient 1 läuft nach allen Transformationen und ersetzt die Ausrichtung." + +# AI Translated +msgid "Ground face at point" +msgstr "Auf Fläche an Punkt legen" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Legt jedes Objekt auf die Fläche der konvexen Hülle, die den Punkt X,Y,Z enthält, und lässt es auf das Druckbett fallen. Der Punkt ist in Objektkoordinaten angegeben, die die vor dieser Option angegebenen Drehungen enthalten; --inspect-mesh gibt Flächenmittelpunkte in diesen an. Objekte ohne eine solche Fläche bleiben unverändert, und der Durchlauf schlägt fehl, wenn kein Objekt eine solche hat. --orient 1 läuft nach allen Transformationen und ersetzt die Ausrichtung." + msgid "Scale the model by a float factor." msgstr "Skalierung des Modells um einen Faktor" @@ -20886,14 +21082,17 @@ msgstr "Diese Aktion kann nicht rückgängig gemacht werden. Fortsetzen?" msgid "Skipping objects." msgstr "Objekte werden übersprungen." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Materialanteil" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Modellhöhe" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Anteil" msgid "Select Filament" msgstr "Filament auswählen" @@ -21151,12 +21350,14 @@ msgid "Drying-Dehumidifying" msgstr "Trocknung – Entfeuchten" # AI Translated -msgid " maximum drying temperature is " -msgstr " maximale Trocknungstemperatur ist " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Die maximale Trocknungstemperatur von %s beträgt %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " minimale Trocknungstemperatur ist " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Die minimale Trocknungstemperatur von %s beträgt %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -21601,6 +21802,95 @@ msgstr "" "Verwerfungen vermeiden\n" "Wussten Sie, dass beim Drucken von Materialien, die zu Verwerfungen neigen, wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die Wahrscheinlichkeit von Verwerfungen verringert werden kann?" +#~ msgid "Other" +#~ msgstr "Sonstiges" + +#~ msgid "Left: " +#~ msgstr "Links: " + +#~ msgid "Right: " +#~ msgstr "Rechts: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Die maximale Temperatur darf nicht überschritten werden " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Die minimale Temperatur sollte nicht weniger als " + +#~ msgid "up to" +#~ msgstr "bis zu" + +#~ msgid "above" +#~ msgstr "über" + +#~ msgid "from" +#~ msgstr "von" + +#~ msgid "Configuration package: " +#~ msgstr "Konfigurationspaket:" + +#~ msgid " updated to " +#~ msgstr " aktualisiert auf " + +#~ msgid "Grouping error: " +#~ msgstr "Gruppierungsfehler: " + +#~ msgid " can not be placed in the " +#~ msgstr " kann nicht platziert werden in der " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " maximale Trocknungstemperatur ist " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " minimale Trocknungstemperatur ist " + +# AI Translated +#~ msgid "needs" +#~ msgstr "benötigt" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "nicht aktiviert" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "Material nicht veröffentlicht" + +#~ msgid "Select the language" +#~ msgstr "Sprache wählen" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Plugin auswählen" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Richtung, in der obere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n" +#~ "Nach außen beginnt in der Mitte der Oberfläche, sodass überschüssiges Material zum Rand geschoben wird, wo es am wenigsten sichtbar ist. Nach innen beginnt am Rand und endet mit den engen Kurven in der Mitte.\n" +#~ "Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Richtung, in der untere Oberflächen gefüllt werden, wenn ein mittenbasiertes Muster (Konzentrisch, Archimedische Akkorde, Oktagramm Spirale) verwendet wird.\n" +#~ "Nach innen beginnt jede Oberfläche mit den breiteren äußeren Kurven, was die Haftung der ersten Schicht auf Druckbetten verbessert, auf denen die engen Kurven in der Mitte möglicherweise nicht haften. Nach außen beginnt in der Mitte und schiebt überschüssiges Material zum Rand.\n" +#~ "Standard verwendet die Sortierung nach kürzestem Pfad, die in beide Richtungen verlaufen kann." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Wenn aktiviert, wird der Reinigungsturm nicht auf Schichten ohne Werkzeugwechsel gedruckt. Auf Schichten mit einem Werkzeugwechsel wird der Extruder nach unten fahren, um den Reinigungsturm zu drucken. Der Benutzer ist dafür verantwortlich, dass es keine Kollision mit dem Druck gibt." + +#~ msgid "This exports settings to a file." +#~ msgstr "Einstellungen in eine Datei exportieren." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Native Wayland Liveview erfordert das GStreamer GTK Video Sink. Bitte installieren Sie das gtksink-Plugin für GStreamer und starten Sie OrcaSlicer neu." diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 37485ba662..d6f39cacb5 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-06-17 15:44-0300\n" "Last-Translator: Alexandre Folle de Menezes\n" "Language-Team: \n" @@ -2289,13 +2289,6 @@ msgstr "" msgid "%s has been removed." msgstr "" - -msgid "Select the language" -msgstr "" - -msgid "Language" -msgstr "" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "" @@ -3482,10 +3475,12 @@ msgstr "" msgid "Switch track at Filament Track Switch" msgstr "" -msgid "The maximum temperature cannot exceed " +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" msgstr "" -msgid "The minmum temperature should not be less than " +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" msgstr "" msgid "Type to filter..." @@ -4318,6 +4313,12 @@ msgid "" "Error message: %1%" msgstr "" +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "" @@ -4990,8 +4991,10 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "" #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "" + +msgid "%" msgstr "" #, boost-format @@ -5017,16 +5020,13 @@ msgstr "" msgid "System agents" msgstr "" -msgid "No plugin selected" -msgstr "" - msgid "Add plugin" msgstr "" -msgid "Select plugin" +msgid "Remove plugin" msgstr "" -msgid "Remove plugin" +msgid "No plugin selected" msgstr "" msgid "Configure" @@ -5282,13 +5282,16 @@ msgstr "" msgid "Regroup filament" msgstr "" -msgid "up to" +#, boost-format +msgid "up to %1% mm" msgstr "" -msgid "above" +#, boost-format +msgid "above %1% mm" msgstr "" -msgid "from" +#, boost-format +msgid "from %1% to %2% mm" msgstr "" msgid "Usage" @@ -5639,7 +5642,7 @@ msgstr "" msgid "Size:" msgstr "" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "" @@ -7176,6 +7179,12 @@ msgctxt "Layers" msgid "Bottom" msgstr "" +msgid "This setting does not specify a plugin capability type." +msgstr "" + +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "" + msgid "Plugin Selection" msgstr "" @@ -8286,7 +8295,6 @@ msgstr "" msgid "Language selection" msgstr "" - msgid "Asia-Pacific" msgstr "" @@ -8380,6 +8388,9 @@ msgstr "" msgid "General" msgstr "" +msgid "Language" +msgstr "" + msgid "Metric" msgstr "" @@ -8769,9 +8780,6 @@ msgstr "" msgid "Dimmed layer brightness" msgstr "" -msgid "%" -msgstr "" - msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." @@ -9165,13 +9173,12 @@ msgstr "" msgid "Filament %d (mixed)" msgstr "" -msgid "needs" +#, boost-format +msgid "%1% needs %2%, which is not enabled." msgstr "" -msgid "not enabled" -msgstr "" - -msgid "material not published" +#, boost-format +msgid "%1% needs %2%, whose material will not be published." msgstr "" msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." @@ -9226,6 +9233,9 @@ msgstr "" msgid "Detach from parent" msgstr "" +msgid "Save without parent" +msgstr "" + msgid "Unique preset" msgstr "" @@ -9875,9 +9885,15 @@ msgstr "" msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "" +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "" + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "" +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "" + msgid "Still print by object?" msgstr "" @@ -10226,9 +10242,6 @@ msgstr "" msgid "Printable space" msgstr "" -msgid "Printer Agent" -msgstr "" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "" @@ -10588,12 +10601,6 @@ msgstr "" msgid "Capabilities" msgstr "" -msgid "Left: " -msgstr "" - -msgid "Right: " -msgstr "" - msgid "Show all presets (including incompatible)" msgstr "" @@ -11397,15 +11404,19 @@ msgstr "" msgid "Copying of file %1% to %2% failed: %3%" msgstr "" +msgid "Downloading new vendor profile(s): " +msgstr "" + +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "" + +msgid "Failed to download vendor profile(s): " +msgstr "" + msgid "Please check any unsaved changes before updating the configuration." msgstr "" -msgid "Configuration package: " -msgstr "" - -msgid " updated to " -msgstr "" - msgid "Open G-code file:" msgstr "" @@ -11461,10 +11472,12 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "" -msgid "Grouping error: " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" msgstr "" -msgid " can not be placed in the " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" msgstr "" msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -11578,6 +11591,9 @@ msgstr "" msgid "%1% is too tall, and collisions will be caused." msgstr "" +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "" + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "" @@ -11900,6 +11916,9 @@ msgstr "" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "" +msgid "Printer Agent" +msgstr "" + msgid "Select the network agent implementation for printer communication." msgstr "" @@ -12748,6 +12767,9 @@ msgstr "" msgid "Concentric" msgstr "" +msgid "Spiral Inset" +msgstr "" + msgid "Hilbert Curve" msgstr "" @@ -12817,7 +12839,7 @@ msgid "Top surface fill order" msgstr "" msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" @@ -12826,7 +12848,7 @@ msgid "Bottom surface fill order" msgstr "" msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" @@ -12914,6 +12936,12 @@ msgstr "" msgid "Clockwise" msgstr "" +msgid "Distance to rod" +msgstr "" + +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "" + msgid "Height to rod" msgstr "" @@ -14864,6 +14892,15 @@ msgstr "" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "" +msgid "Print unsupported walls last" +msgstr "" + +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" + msgid "Outer walls" msgstr "" @@ -15273,6 +15310,27 @@ msgstr "" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "" +msgid "Wipe inward" +msgstr "" + +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" + +msgid "Wipe inward distance" +msgstr "" + +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" + msgid "Wipe before external loop" msgstr "" @@ -15513,7 +15571,7 @@ msgstr "" msgid "No sparse layers (beta)" msgstr "" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." msgstr "" msgid "Prime all printing extruders" @@ -15534,6 +15592,24 @@ msgstr "" msgid "Cyclic" msgstr "" +msgid "Cyclic order" +msgstr "" + +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" + +msgid "Apply cyclic order to first layer" +msgstr "" + +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" + msgid "Slice gap closing radius" msgstr "" @@ -15543,9 +15619,6 @@ msgstr "" msgid "Slicing Mode" msgstr "" -msgid "Other" -msgstr "" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "" @@ -16448,6 +16521,12 @@ msgstr "" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "" +msgid "Strict mode" +msgstr "" + +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "" + msgid "Normative check" msgstr "" @@ -16460,10 +16539,22 @@ msgstr "" msgid "This outputs the model’s information." msgstr "" +msgid "Inspect mesh (JSON to stdout)" +msgstr "" + +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "" + +msgid "Inspect paint (JSON to stdout)" +msgstr "" + +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "" + msgid "Export Settings" msgstr "" -msgid "This exports settings to a file." +msgid "This exports settings to a file. Use - to write them to stdout." msgstr "" msgid "Send progress to pipe" @@ -16520,6 +16611,24 @@ msgstr "" msgid "Rotation angle around the Y axis in degrees." msgstr "" +msgid "Ground largest face" +msgstr "" + +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "" + +msgid "Ground face by normal" +msgstr "" + +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "" + +msgid "Ground face at point" +msgstr "" + +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "" + msgid "Scale the model by a float factor." msgstr "" @@ -19650,10 +19759,12 @@ msgstr "" msgid "Drying-Dehumidifying" msgstr "" -msgid " maximum drying temperature is " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." msgstr "" -msgid " minimum drying temperature is " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." msgstr "" msgid "This filament may not be completely dried." diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 9dfcde53e5..56132eb970 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: Ian A. Bassi <>\n" "Language-Team: \n" @@ -2356,13 +2356,6 @@ msgstr "Hay una actualización disponible. Abra el cuadro de diálogo del paquet msgid "%s has been removed." msgstr "Se ha eliminado %s." - -msgid "Select the language" -msgstr "Seleccionar el idioma" - -msgid "Language" -msgstr "Idioma" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "No se pudo cambiar Orca Slicer al idioma %s." @@ -3560,11 +3553,15 @@ msgstr "Retirar el filamento actual en el Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Cambiar de vía en el Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "La temperatura máxima no puede superar " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "La temperatura máxima no puede superar %d" -msgid "The minmum temperature should not be less than " -msgstr "La temperatura mínima no debe ser inferior a " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "La temperatura mínima no debe ser inferior a %d" msgid "Type to filter..." msgstr "Escribe para filtrar..." @@ -4424,6 +4421,15 @@ msgstr "" "Error al copiar el G-Code temporal en el G-Code de salida. ¿Quizás la tarjeta SD está protegida contra escritura?\n" "Mensaje de error: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Error al copiar el código G temporal al código G de salida.\n" +"Mensaje de error: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "La copia del G-Code temporal al G-Code de salida ha fallado. Puede haber un problema con el dispositivo de destino, intenta exportar nuevamente o usa un dispositivo diferente. El G-Code de salida dañado está en %1%.tmp." @@ -5154,10 +5160,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "El valor %s está fuera de rango. El rango válido es de %d a %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"¿Es %s%% o %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "¿Es %s%% o %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5182,18 +5189,15 @@ msgstr "Formato inválido. Formato de vector esperado: \"%1%\"" msgid "System agents" msgstr "Agentes del sistema" -msgid "No plugin selected" -msgstr "Ningún plugin seleccionado" - msgid "Add plugin" msgstr "Añadir plugin" -msgid "Select plugin" -msgstr "Seleccionar plugin" - msgid "Remove plugin" msgstr "Eliminar plugin" +msgid "No plugin selected" +msgstr "Ningún plugin seleccionado" + msgid "Configure" msgstr "Configurar" @@ -5447,14 +5451,20 @@ msgstr "Ajustar a óptimo" msgid "Regroup filament" msgstr "Reagrupar filamentos" -msgid "up to" -msgstr "hasta" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "hasta %1% mm" -msgid "above" -msgstr "sobre" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "por encima de %1% mm" -msgid "from" -msgstr "desde" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "de %1% a %2% mm" msgid "Usage" msgstr "Uso" @@ -5811,7 +5821,7 @@ msgstr "Volumen:" msgid "Size:" msgstr "Tamaño:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Se han encontrado conflictos de rutas G-Code en la capa %d, Z = %.2lfmm. Por favor, separe más los objetos en conflicto (%s <-> %s)." @@ -6123,11 +6133,13 @@ msgstr "Guardar proyecto como" msgid "Save current project as" msgstr "Guardar el proyecto actual como" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Publicar 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Exportar un archivo 3MF con los ajustes seleccionados incrustados" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importar 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7386,6 +7398,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferior" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Este ajuste no especifica un tipo de capacidad de plugin." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Este ajuste especifica un tipo de capacidad de plugin no reconocido: " + msgid "Plugin Selection" msgstr "Selección de plugins" @@ -7910,11 +7930,13 @@ msgstr "¡Por favor, confirme que el G-Code dentro de los perfiles son seguros p msgid "Customized Preset" msgstr "Perfil Personalizado" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Algunos ajustes publicados no se han podido aplicar:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Se han cambiado algunas ranuras de filamento:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "¡El nombre de los componentes dentro del archivo de pasos no tiene formato UTF-8!" @@ -8311,13 +8333,17 @@ msgstr "Guardar el archivo laminado como:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "El archivo %s ha sido mandado al almacenamiento de la impresora y puede ser visualizado en la impresora." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Publicar archivo 3MF como:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"No se ha podido exportar el archivo 3MF publicado.\n" +"Compruebe si la carpeta existe en línea o si otros programas tienen el archivo abierto." msgid "Publish" msgstr "Publicar" @@ -8523,7 +8549,6 @@ msgstr "¿Quieres continuar?" msgid "Language selection" msgstr "Selección de idiomas" - msgid "Asia-Pacific" msgstr "Asia-Pacífico" @@ -8628,6 +8653,9 @@ msgstr "Ruta de Instancia Actual: " msgid "General" msgstr "General" +msgid "Language" +msgstr "Idioma" + msgid "Metric" msgstr "Métrico" @@ -9053,9 +9081,6 @@ msgstr "Al desplazar el control deslizante de capas en la vista previa laminada, msgid "Dimmed layer brightness" msgstr "Brillo de las capas atenuadas" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9449,63 +9474,80 @@ msgstr "Cargando datos" msgid "Jump to webpage" msgstr "Ir a la página web" +# AI Translated msgid "Material" -msgstr "" +msgstr "Material" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filamento mixto" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Algunos filamentos mixtos dependen de filamentos que no se publicarán:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filamento %d (mixto)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% necesita %2%, que no está habilitado." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% necesita %2%, cuyo material no se publicará." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Para publicar un filamento mixto, habilite todos los filamentos que utiliza y elija Publicación completa o cumpla su requisito de Tipo." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Publicar de todos modos" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Publicar 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Seleccione qué ajustes se publicarán en el archivo 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki de Publicar 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Guía en vídeo de Publicar 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filamento mixto - se publica como un conjunto cuando se selecciona \"Habilitar\" arriba" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Publicar este filamento mixto y habilitar + publicar completamente sus filamentos componentes" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Publicar esta ranura de filamento en el archivo 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Publicación completa" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Incrustar el filamento completo de esta ranura en el archivo 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtrar no seleccionados" #, c-format, boost-format msgid "Save %s as" @@ -9524,6 +9566,10 @@ msgstr "Copia en este perfil todos los valores heredados del perfil padre y elim msgid "Detach from parent" msgstr "Separar del elemento padre" +# AI Translated +msgid "Save without parent" +msgstr "Guardar sin elemento padre" + # AI Translated msgid "Unique preset" msgstr "Perfil único" @@ -10184,9 +10230,17 @@ msgstr "La torre de purga es necesaria para la detección de aglomeraciones. Pue msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Habilitar tanto la altura Z precisa como la torre de purga puede causar errores de laminado. ¿Desea habilitar la altura Z precisa?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "El timelapse suave necesita una torre de purga en cada capa, lo que no es compatible con \"Sin capas de baja densidad\". Se ha desactivado \"Sin capas de baja densidad\"." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "La torre de purga es necesaria para que el timelapse sea suave. Puede haber defectos en el modelo sin torre de purga. ¿Desea activar la torre de purga?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Sin capas de baja densidad\" no es compatible con el timelapse suave, que necesita una torre de purga en cada capa. El timelapse ha cambiado al modo tradicional." + msgid "Still print by object?" msgstr "¿Seguir imprimiendo por objeto?" @@ -10551,9 +10605,6 @@ msgstr "Perfiles de proceso compatibles" msgid "Printable space" msgstr "Espacio imprimible" -msgid "Printer Agent" -msgstr "Agente de impresora" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Seleccione la implementación del agente de red para la comunicación con la impresora. Los agentes disponibles se registran al iniciar el sistema." @@ -10952,12 +11003,6 @@ msgstr "Número de extrusores" msgid "Capabilities" msgstr "Capacidades" -msgid "Left: " -msgstr "Izquierda: " - -msgid "Right: " -msgstr "Derecha: " - msgid "Show all presets (including incompatible)" msgstr "Mostrar todos los perfiles (incluyendo los compatibles)" @@ -11775,15 +11820,22 @@ msgstr "Reparación cancelada" msgid "Copying of file %1% to %2% failed: %3%" msgstr "La copia del archivo %1% a %2% falló: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Descargando nuevos perfiles de fabricante: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Paquete de configuración: %1% actualizado a %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "No se han podido descargar los perfiles de fabricante: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Es necesario comprobar los cambios no guardados antes de actualizar la configuración." -msgid "Configuration package: " -msgstr "Paquete de configuración: " - -msgid " updated to " -msgstr " Actualizado a " - msgid "Open G-code file:" msgstr "Abrir archivo G-Code:" @@ -11843,11 +11895,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping solo es compatible con Klipper, RepRapFirmware y Marlin 2." -msgid "Grouping error: " -msgstr "Error de agrupación: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Error de agrupación: %1% no se puede colocar en la boquilla izquierda" -msgid " can not be placed in the " -msgstr " no se puede colocar en el " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Error de agrupación: %1% no se puede colocar en la boquilla derecha" msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Error de agrupación en modo manual. Compruebe el número de boquillas o vuelva a agrupar." @@ -11960,6 +12016,10 @@ msgstr "%1% está demasiado cerca de otros, y pueden producirse colisiones." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% es demasiado alto, y se producirán colisiones." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "La posición relativa del modelo y la torre de purga no cumple los requisitos de la función \"Sin capas de baja densidad\". Ajuste sus posiciones relativas, reduzca la altura del modelo o desactive \"Sin capas de baja densidad\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " está muy cerca del área de exclusión, puede conllevar colisiones cuando se imprime." @@ -12295,6 +12355,9 @@ msgstr "Utiliza 3MF en lugar de G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Activa esta opción si la impresora admite un archivo 3MF como trabajo de impresión. Cuando está activada, Orca Slicer envía el archivo cortado como un archivo .gcode.3mf, en lugar de como un archivo .gcode convencional." +msgid "Printer Agent" +msgstr "Agente de impresora" + msgid "Select the network agent implementation for printer communication." msgstr "Seleccione la implementación del agente de red para la comunicación con la impresora." @@ -13340,6 +13403,10 @@ msgstr "Rectilíneo Alineado" msgid "Concentric" msgstr "Concéntrico" +# AI Translated +msgid "Spiral Inset" +msgstr "Espiral interior" + msgid "Hilbert Curve" msgstr "Curva de Hilbert" @@ -13419,26 +13486,28 @@ msgstr "" msgid "Top surface fill order" msgstr "Orden de relleno de la superficie superior" +# AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Dirección en la que se rellenan las superficies superiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n" -"Hacia afuera comienza en el centro de la superficie, de modo que cualquier exceso de material se empuja hacia el borde, donde es menos visible. Hacia adentro comienza en el borde y termina con las curvas cerradas del centro.\n" -"Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección." +"Dirección en la que se rellenan las superficies superiores cuando se usa un patrón basado en el centro (Concéntrico, Espiral interior, Espiral de Arquímedes, Espiral Octagonal).\n" +"Hacia fuera empieza en el centro de la superficie, de modo que el material sobrante se empuja hacia el borde, donde resulta menos visible. Hacia dentro empieza en el borde y termina con las curvas cerradas del centro.\n" +"Por defecto usa el orden de ruta más corta, que puede recorrerse en cualquiera de los dos sentidos." msgid "Bottom surface fill order" msgstr "Orden de relleno de la superficie inferior" +# AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Dirección en la que se rellenan las superficies inferiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n" -"Hacia adentro comienza cada superficie con las curvas exteriores más amplias, lo que mejora la adherencia de la primera capa en las camas donde las curvas cerradas del centro pueden no adherirse. Hacia afuera comienza en el centro, empujando cualquier exceso de material hacia el borde.\n" -"Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección." +"Dirección en la que se rellenan las superficies inferiores cuando se usa un patrón basado en el centro (Concéntrico, Espiral interior, Espiral de Arquímedes, Espiral Octagonal).\n" +"Hacia dentro empieza cada superficie por las curvas exteriores más amplias, lo que mejora la adhesión de la capa inicial en camas donde las curvas cerradas del centro pueden no agarrar. Hacia fuera empieza en el centro y empuja el material sobrante hacia el borde.\n" +"Por defecto usa el orden de ruta más corta, que puede recorrerse en cualquiera de los dos sentidos." msgid "Internal solid infill pattern" msgstr "Patrón de relleno sólido interno" @@ -13537,6 +13606,14 @@ msgstr "En sentido contrario a las agujas del reloj" msgid "Clockwise" msgstr "En el sentido de las agujas del reloj" +# AI Translated +msgid "Distance to rod" +msgstr "Distancia a la varilla" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Distancia horizontal de la punta de la boquilla al borde más alejado de la varilla. Se usa para evitar colisiones en la impresión por objeto." + msgid "Height to rod" msgstr "Altura a la barra" @@ -15663,6 +15740,20 @@ msgstr "Detectar perímetros en voladizo" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Detecta el porcentaje de voladizo en relación con el ancho de línea y utiliza diferentes velocidades para imprimir. Para el 100%% de voladizo, se utiliza la velocidad de puente." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Imprimir al final los perímetros sin soporte" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Los bucles de perímetro que quedan completamente en el aire se imprimen cuando algo puede sostenerlos:\n" +"se extruyen después de los demás perímetros de su isla, empezando por el más interno, sea cual sea el orden de perímetros.\n" +"Un bucle que solo pueden anclar los puentes de esta capa espera a que se impriman esos puentes, mientras que un bucle que discurre junto a un perímetro con soporte mantiene su lugar antes del relleno, que lo necesita como anclaje." + msgid "Outer walls" msgstr "Paredes exteriores" @@ -16090,6 +16181,39 @@ msgstr "Purgado en contornos curvos" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Para minimizar la visibilidad de la costura en un contorno curvo cerrado, se ejecuta un pequeño movimiento hacia dentro antes de que el extrusor abandone la curva." +# AI Translated +msgid "Wipe inward" +msgstr "Purgado hacia dentro" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Se aplica solo a los perímetros externos, incluidos los contornos de los agujeros. Durante el purgado mueve la boquilla caliente hacia los perímetros internos ya impresos para reducir el recalentamiento del plástico recién depositado y las marcas de costura.\n" +"\n" +"Es especialmente útil con alturas de capa por debajo de 0,1 mm, donde las marcas de purgado se ven más.\n" +"\n" +"Usa el purgado normal si no hay ningún perímetro interno contiguo ya impreso (zonas de un solo perímetro u orden de perímetros Exterior/Interior) o si no se encuentra ninguna trayectoria hacia dentro con apoyo, por ejemplo en esquinas cerradas o huecos de costura." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Distancia de purgado hacia dentro" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Distancia que se desplaza la trayectoria de purgado alejándose del perímetro externo, indicada en milímetros o como porcentaje del ancho de extrusión real del perímetro externo.\n" +"\n" +"Por ejemplo, 50% desplaza la trayectoria la mitad del ancho del perímetro externo. El desplazamiento efectivo está limitado tanto por el ancho real del perímetro externo como por el espacio disponible hasta el perímetro contiguo, por lo que valores por encima de 100% o una distancia absoluta equivalente no tienen ningún efecto adicional. Ponga 0 para desactivar el desplazamiento." + msgid "Wipe before external loop" msgstr "Purgado antes del bucle externo" @@ -16349,8 +16473,9 @@ msgstr "Recoge la nueva herramienta sin esperar a que alcance la temperatura de msgid "No sparse layers (beta)" msgstr "Sin capas de baja densidad (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Sí está activado, la torre de purga no se imprimirá en las capa sin cambio de cabezal. En las capas con cambio de cabezal, viajará hacía abajo para imprimir la torre de purga. El usuario es responsable de asegurarse que no hay colisiones con la impresión." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Si se habilita, la torre de purga no se imprimirá en las capas sin cambios de herramienta. En las capas con un cambio de herramienta, el extrusor bajará para imprimir la torre de purga, de modo que la torre queda por debajo del modelo y el cabezal tiene que descender hasta ella. Se rechazan las disposiciones en las que eso chocaría con un objeto ya impreso. No tiene efecto con el timelapse suave ni con la detección de atascos en la boquilla, que necesitan una torre en cada capa." msgid "Prime all printing extruders" msgstr "Purgar todos los extrusores" @@ -16373,6 +16498,34 @@ msgstr "" msgid "Cyclic" msgstr "Cíclico" +# AI Translated +msgid "Cyclic order" +msgstr "Orden cíclico" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Secuencia de filamentos personalizada que usa el orden cíclico de cambios de herramienta, como números de filamento separados por comas (p. ej. \"3,2,1,4\").\n" +"Cada capa imprime sus filamentos siguiendo esta secuencia; los filamentos no incluidos se imprimen al final, en orden ascendente.\n" +"Déjelo vacío para recorrer los filamentos en orden ascendente." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Aplicar el orden cíclico a la capa inicial" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Aplica el orden cíclico de cambios de herramienta también a la capa inicial.\n" +"Por defecto está desactivado, porque la capa inicial se ordena en su lugar para lograr la mejor adhesión a la cama: los filamentos que imprimen detalles pequeños y frágiles de la capa inicial se imprimen al final, de modo que los cambios de herramienta y desplazamientos posteriores tienen menos probabilidad de arrancar esas piezas mal ancladas. Este orden de la capa inicial también respeta una secuencia de filamentos personalizada para la capa inicial cuando se ha definido. La ventaja del orden cíclico (los cambios de herramienta adicionales dan a cada capa más tiempo para enfriarse) no se aplica a la capa inicial, que se imprime despacio y caliente para favorecer la adhesión.\n" +"Active esta opción solo si necesita exactamente la misma secuencia de herramientas en todas las capas, incluida la primera, a costa de esa optimización de la adhesión." + msgid "Slice gap closing radius" msgstr "Radio de cierre de laminado" @@ -16382,9 +16535,6 @@ msgstr "Las grietas más pequeñas que 2x el radio de cierre se rellenan durante msgid "Slicing Mode" msgstr "Modo de laminado" -msgid "Other" -msgstr "Otro" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Utilice \"Par-impar\" para los modelos de avión de 3DLabPrint. Utilice \"Cerrar orificios\" para cerrar todos los orificios del modelo." @@ -17358,6 +17508,14 @@ msgstr "No comprobar" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "No ejecute ninguna comprobación de validez, como la comprobación de conflictos de ruta de G-Code." +# AI Translated +msgid "Strict mode" +msgstr "Modo estricto" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Sale con un código distinto de cero cuando el laminado genera un aviso no crítico que de otro modo solo se registraría, como un modelo que necesita soportes mientras los soportes están desactivados. Úselo en CI o en procesos automatizados que nunca deban entregar un laminado sutilmente defectuoso. Cada uno de esos avisos también aparece con una clase estable en el array `warnings` de result.json, que solo se escribe en Linux. No se puede combinar con --no-check, que omite la comprobación de soportes." + msgid "Normative check" msgstr "Comprobación de normativa" @@ -17370,11 +17528,28 @@ msgstr "Información del modelo de salida" msgid "This outputs the model’s information." msgstr "Salida de la información del modelo." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Inspeccionar malla (JSON por stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Imprime por stdout un resumen JSON de cada objeto cargado y después sale: sus cajas envolventes y las caras de su envolvente convexa sobre las que puede apoyarse, con sus normales, áreas y centros. Estas son las caras entre las que eligen las opciones --ground-*. Alternativa legible por máquina a --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Inspeccionar pintado (JSON por stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Imprime un resumen JSON estructurado de cada capa pintada (soportes, costura, color MMU, piel rugosa) ya guardada en el modelo cargado — número de facetas, área de superficie y caja envolvente local a la malla por cada estado — y después sale. Alternativa legible por máquina a abrir las herramientas de pintado en la interfaz." + msgid "Export Settings" msgstr "Ajustes de exportación" -msgid "This exports settings to a file." -msgstr "Exporta los ajustes a un archivo." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Esto exporta los ajustes a un archivo. Use - para escribirlos por stdout." msgid "Send progress to pipe" msgstr "Enviar el progreso a la tubería" @@ -17430,6 +17605,30 @@ msgstr "Rotar alrededor de Y" msgid "Rotation angle around the Y axis in degrees." msgstr "El ángulo de rotación alrededor del eje Y en grados." +# AI Translated +msgid "Ground largest face" +msgstr "Apoyar sobre la cara mayor" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Apoya cada objeto sobre la cara mayor de su envolvente convexa y lo deja caer sobre la cama. Entre caras igual de grandes se conserva la que ya mira hacia abajo. Los objetos sin una cara lo bastante grande para apoyarse se dejan como están. Las transformaciones se aplican en el orden de la línea de órdenes, por lo que se respetan las rotaciones indicadas antes de esta opción. --orient 1 se ejecuta después de todas las transformaciones y sustituye la orientación." + +# AI Translated +msgid "Ground face by normal" +msgstr "Apoyar sobre la cara según la normal" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Apoya cada objeto sobre la cara de su envolvente convexa cuya normal exterior sea la más próxima a la dirección NX,NY,NZ y lo deja caer sobre la cama. La dirección está en coordenadas del objeto, que incluyen las rotaciones indicadas antes de esta opción y coinciden con los ejes de la bandeja salvo que el archivo de entrada rote el objeto. Por ejemplo, 1,0,0 apoya el objeto sobre su lado +X. --orient 1 se ejecuta después de todas las transformaciones y sustituye la orientación." + +# AI Translated +msgid "Ground face at point" +msgstr "Apoyar sobre la cara en un punto" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Apoya cada objeto sobre la cara de su envolvente convexa que contiene el punto X,Y,Z y lo deja caer sobre la cama. El punto está en coordenadas del objeto, que incluyen las rotaciones indicadas antes de esta opción; --inspect-mesh indica los centros de las caras en esas coordenadas. Los objetos sin una cara así se dejan como están, y la ejecución falla si ningún objeto tiene una. --orient 1 se ejecuta después de todas las transformaciones y sustituye la orientación." + msgid "Scale the model by a float factor." msgstr "Escala el modelo por un factor de flotación." @@ -20479,14 +20678,17 @@ msgstr "Esta acción no se puede deshacer. ¿Continuar?" msgid "Skipping objects." msgstr "Omitiendo objetos." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Proporción de material" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Altura del modelo" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Proporción" msgid "Select Filament" msgstr "Seleccionar Filamento" @@ -20727,11 +20929,15 @@ msgstr "Secado - Calentamiento" msgid "Drying-Dehumidifying" msgstr "Secado - Deshumidificación" -msgid " maximum drying temperature is " -msgstr " la temperatura máxima de secado es " +# AI Translated +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "La temperatura máxima de secado de %s es %d°C." -msgid " minimum drying temperature is " -msgstr " la temperatura mínima de secado es " +# AI Translated +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "La temperatura mínima de secado de %s es %d°C." msgid "This filament may not be completely dried." msgstr "Es posible que este filamento no esté completamente seco." @@ -21144,6 +21350,90 @@ msgstr "" "Evita la deformación\n" "¿Sabías que al imprimir materiales propensos a la deformación como el ABS, aumentar adecuadamente la temperatura de la cama térmica puede reducir la probabilidad de deformaciones?" +#~ msgid "Other" +#~ msgstr "Otro" + +#~ msgid "Left: " +#~ msgstr "Izquierda: " + +#~ msgid "Right: " +#~ msgstr "Derecha: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "La temperatura máxima no puede superar " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "La temperatura mínima no debe ser inferior a " + +#~ msgid "up to" +#~ msgstr "hasta" + +#~ msgid "above" +#~ msgstr "sobre" + +#~ msgid "from" +#~ msgstr "desde" + +#~ msgid "Configuration package: " +#~ msgstr "Paquete de configuración: " + +#~ msgid " updated to " +#~ msgstr " Actualizado a " + +#~ msgid "Grouping error: " +#~ msgstr "Error de agrupación: " + +#~ msgid " can not be placed in the " +#~ msgstr " no se puede colocar en el " + +#~ msgid " maximum drying temperature is " +#~ msgstr " la temperatura máxima de secado es " + +#~ msgid " minimum drying temperature is " +#~ msgstr " la temperatura mínima de secado es " + +# AI Translated +#~ msgid "needs" +#~ msgstr "necesita" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "no habilitado" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "material no publicado" + +#~ msgid "Select the language" +#~ msgstr "Seleccionar el idioma" + +#~ msgid "Select plugin" +#~ msgstr "Seleccionar plugin" + +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Dirección en la que se rellenan las superficies superiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n" +#~ "Hacia afuera comienza en el centro de la superficie, de modo que cualquier exceso de material se empuja hacia el borde, donde es menos visible. Hacia adentro comienza en el borde y termina con las curvas cerradas del centro.\n" +#~ "Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección." + +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Dirección en la que se rellenan las superficies inferiores al usar un patrón basado en el centro (Concéntrico, Cuerdas de Arquímedes, Espiral de octograma).\n" +#~ "Hacia adentro comienza cada superficie con las curvas exteriores más amplias, lo que mejora la adherencia de la primera capa en las camas donde las curvas cerradas del centro pueden no adherirse. Hacia afuera comienza en el centro, empujando cualquier exceso de material hacia el borde.\n" +#~ "Por defecto usa el orden de ruta más corta, que puede ir en cualquier dirección." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Sí está activado, la torre de purga no se imprimirá en las capa sin cambio de cabezal. En las capas con cambio de cabezal, viajará hacía abajo para imprimir la torre de purga. El usuario es responsable de asegurarse que no hay colisiones con la impresión." + +#~ msgid "This exports settings to a file." +#~ msgstr "Exporta los ajustes a un archivo." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "La función de visualización en directo nativa de Wayland requiere el receptor de vídeo GTK de GStreamer. Instale el plugin gtksink para GStreamer y, a continuación, reinicie OrcaSlicer." diff --git a/localization/i18n/eu/OrcaSlicer_eu.po b/localization/i18n/eu/OrcaSlicer_eu.po index b966a124cb..a510fcd436 100644 --- a/localization/i18n/eu/OrcaSlicer_eu.po +++ b/localization/i18n/eu/OrcaSlicer_eu.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-07-20 13:33+0200\n" "Last-Translator: Manu Goiogana \n" "Language-Team: \n" @@ -2390,13 +2390,6 @@ msgstr "Eguneratze bat dago erabilgarri. Ireki aurrezarpen-paketeen elkarrizketa msgid "%s has been removed." msgstr "%s kendu da." - -msgid "Select the language" -msgstr "Hautatu hizkuntza" - -msgid "Language" -msgstr "Hizkuntza" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Ezin izan da OrcaSlicer %s hizkuntzara aldatu." @@ -3599,11 +3592,15 @@ msgstr "Atzera erakarri uneko filamentua Filament Track Switch-en" msgid "Switch track at Filament Track Switch" msgstr "Aldatu bidea Filament Track Switch-en" -msgid "The maximum temperature cannot exceed " -msgstr "Gehieneko tenperaturak ezin du hau gainditu: " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Gehieneko tenperaturak ezin du %d gainditu" -msgid "The minmum temperature should not be less than " -msgstr "Gutxieneko tenperaturak ezin du hau baino txikiagoa izan: " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Gutxieneko tenperaturak ezin du %d baino txikiagoa izan" msgid "Type to filter..." msgstr "Idatzi iragazteko..." @@ -4470,6 +4467,15 @@ msgstr "" "Aldi baterako G-code-a irteerako G-code-an kopiatzeak huts egin du. Agian SD txartela idazteko blokeatuta dago?\n" "Errore- mezua: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Huts egin du aldi baterako G-kodea irteerako G-kodera kopiatzeak.\n" +"Errore-mezua: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Aldi baterako G-code-a irteerako G-code-an kopiatzeak huts egin du. Arazoak egon daitezke helburuko gailuarekin, saiatu berriro esportatzen edo beste gailu bat erabiltzen. Hondatutako irteerako G-code-a hemen da: %1%.tmp." @@ -5202,10 +5208,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "%s balioa tartetik kanpo dago. Baliozko tartea %d eta %d artekoa da." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"%s%% edo %s %s da?" +msgid "Is it %s%% or %s %s?" +msgstr "%s%% edo %s %s da?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5231,18 +5238,15 @@ msgstr "Formatuak ez du balio. Espero den formatu bektoriala: \"%1%\"" msgid "System agents" msgstr "Sistema-agenteak" -msgid "No plugin selected" -msgstr "Ez da pluginik hautatu" - msgid "Add plugin" msgstr "Gehitu plugina" -msgid "Select plugin" -msgstr "Hautatu plugina" - msgid "Remove plugin" msgstr "Kendu plugina" +msgid "No plugin selected" +msgstr "Ez da pluginik hautatu" + msgid "Configure" msgstr "Konfiguratu" @@ -5496,14 +5500,20 @@ msgstr "Ezarri optimo gisa" msgid "Regroup filament" msgstr "Taldekatu berriro filamentua" -msgid "up to" -msgstr "honaino" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "%1% mm arte" -msgid "above" -msgstr "honen gainean" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "%1% mm-tik gora" -msgid "from" -msgstr "hemendik" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "%1% mm-tik %2% mm-ra" msgid "Usage" msgstr "Erabilera" @@ -5861,7 +5871,7 @@ msgstr "Bolumena:" msgid "Size:" msgstr "Tamaina:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "G-code ibilbideen gatazkak aurkitu dira %d geruzan, Z = %.2lf mm. Urrundu gehiago gatazkan dauden objektuak (%s <-> %s)." @@ -6169,11 +6179,13 @@ msgstr "Gorde proiektua honela" msgid "Save current project as" msgstr "Gorde uneko proiektua honela" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Argitaratu 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Esportatu 3MF fitxategi bat hautatutako ezarpenak kapsulatuta dituela" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Inportatu 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7433,6 +7445,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Behea" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Ezarpen honek ez du plugin-gaitasun motarik zehazten." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Ezarpen honek ezagutzen ez den plugin-gaitasun mota bat zehazten du: " + msgid "Plugin Selection" msgstr "Plugin-hautaketa" @@ -7988,11 +8008,13 @@ msgstr "Berretsi aurrezarpen hauetako G-codea segurua dela, makinari kalterik ez msgid "Customized Preset" msgstr "Aurrezarpen pertsonalizatua" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Argitaratutako ezarpen batzuk ezin izan dira aplikatu:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Filamentu-erreten batzuk aldatu dira:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "STEP fitxategiko osagai-izena(k) ez dago/daude UTF-8 formatuan!" @@ -8394,13 +8416,17 @@ msgstr "Gorde xerratutako fitxategia honela:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "%s fitxategia inprimagailuaren biltegiratze-eremura bidali da eta inprimagailuan ikus daiteke." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Argitaratu 3MF fitxategia honela:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Huts egin du argitaratutako 3MF fitxategia esportatzeak.\n" +"Egiaztatu karpeta linean dagoen edo beste programa batzuek fitxategia irekita duten." msgid "Publish" msgstr "Argitaratu" @@ -8604,7 +8630,6 @@ msgstr "Jarraitu nahi duzu?" msgid "Language selection" msgstr "Hizkuntza-hautaketa" - msgid "Asia-Pacific" msgstr "Asia-Pazifikoa" @@ -8709,6 +8734,9 @@ msgstr "Uneko instantziaren bide-izena: " msgid "General" msgstr "Orokorra" +msgid "Language" +msgstr "Hizkuntza" + msgid "Metric" msgstr "Metrikoa" @@ -9137,9 +9165,6 @@ msgstr "Xerratutako aurrebistan geruza-graduatzailea mugitzean, unekoaren azpiko msgid "Dimmed layer brightness" msgstr "Ilundutako geruzen distira" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9535,63 +9560,80 @@ msgstr "Datuak igotzen" msgid "Jump to webpage" msgstr "Joan web-orrira" +# AI Translated msgid "Material" -msgstr "" +msgstr "Materiala" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filamentu nahasia" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Filamentu nahasi batzuk argitaratuko ez diren filamentuen mende daude:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "%d filamentua (nahasia)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% filamentuak %2% behar du, baina ez dago gaituta." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% filamentuak %2% behar du, baina haren materiala ez da argitaratuko." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Filamentu nahasi bat argitaratzeko, gaitu erabiltzen dituen filamentu guztiak eta hautatu Argitalpen osoa edo bete bere Mota baldintza." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Argitaratu hala ere" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Argitaratu 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Hautatu zein ezarpen argitaratuko diren 3MF fitxategian" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "3MF argitaratzeko wikia" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "3MF argitaratzeko bideo-gida" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filamentu nahasia - osorik argitaratzen da goian \"Gaitu\" hautatuta dagoenean" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Argitaratu filamentu nahasi hau eta gaitu + argitaratu osorik bere osagai diren filamentuak" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Argitaratu filamentu-erreten hau 3MF fitxategian" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Argitalpen osoa" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Kapsulatu erreten honetako filamentu osoa 3MF fitxategian" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Iragazi hautatu gabeak" #, c-format, boost-format msgid "Save %s as" @@ -9610,6 +9652,10 @@ msgstr "Aurrezarpen honetara gurasoaren balio heredatu guztiak kopiatzen ditu et msgid "Detach from parent" msgstr "Bereizi gurasotik" +# AI Translated +msgid "Save without parent" +msgstr "Gorde gurasorik gabe" + # AI Translated msgid "Unique preset" msgstr "Aurrezarpen bakarra" @@ -10291,9 +10337,17 @@ msgstr "Purgatze-dorrea behar da material-metaketa detektatzeko. Modeloak akatsa msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Z altuera zehatza eta purgatze-dorrea batera gaitzeak xerratze-erroreak eragin ditzake. Hala ere Z altuera zehatza gaitu nahi duzu?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Timelapse leunak purgatze-dorrea behar du geruza guztietan, eta hori ez da bateragarria \"Geruza bakandurik ez\" aukerarekin. \"Geruza bakandurik ez\" desaktibatu da." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Purgatze-dorrea behar da timelapse leunaren modurako. Modeloak akatsak izan ditzake purgatze-dorrerik gabe. Purgatze-dorrea gaitu nahi duzu?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Geruza bakandurik ez\" ez da bateragarria timelapse leunarekin, horrek purgatze-dorrea behar baitu geruza guztietan. Timelapsea modu tradizionalera aldatu da." + msgid "Still print by object?" msgstr "Objektuka inprimatu hala ere?" @@ -10663,9 +10717,6 @@ msgstr "Prozesu-profil bateragarriak" msgid "Printable space" msgstr "Inprimatzeko espazioa" -msgid "Printer Agent" -msgstr "Inprimagailu-agentea" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Hautatu sare-agentearen inplementazioa inprimagailuarekin komunikatzeko. Erabilgarri dauden agenteak abioan erregistratzen dira." @@ -11059,12 +11110,6 @@ msgstr "Estrusore kopurua" msgid "Capabilities" msgstr "Gaitasunak" -msgid "Left: " -msgstr "Ezkerra: " - -msgid "Right: " -msgstr "Eskuina: " - msgid "Show all presets (including incompatible)" msgstr "Erakutsi aurrezarpen guztiak (bateraezinak barne)" @@ -11895,15 +11940,22 @@ msgstr "Konponketa bertan behera utzi da" msgid "Copying of file %1% to %2% failed: %3%" msgstr "%1% fitxategia %2% helmugara kopiatzeak huts egin du: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Hornitzaileen profil berriak deskargatzen: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Konfigurazio-paketea: %1% %2% bertsiora eguneratu da" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Huts egin du hornitzaileen profilak deskargatzeak: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Egiaztatu gorde gabeko aldaketarik dagoen konfigurazioa eguneratu aurretik." -msgid "Configuration package: " -msgstr "Konfigurazio-paketea: " - -msgid " updated to " -msgstr " hona eguneratu da: " - msgid "Open G-code file:" msgstr "Ireki G-code fitxategia:" @@ -11963,11 +12015,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Sarrera-moldaketa Klipperrek, RepRapFirmwarek eta Marlin 2k soilik onartzen dute." -msgid "Grouping error: " -msgstr "Taldekatze-errorea: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Taldekatze-errorea: %1% ezin da ezkerreko pitan jarri" -msgid " can not be placed in the " -msgstr " ezin da hemen kokatu: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Taldekatze-errorea: %1% ezin da eskuineko pitan jarri" msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Taldekatze-errorea eskuzko moduan. Egiaztatu pita kopurua edo taldekatu berriro." @@ -12080,6 +12136,10 @@ msgstr "%1% besteetatik gertuegi dago, eta talkak sor daitezke." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% altuegia da, eta talkak sortuko dira." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Modeloaren eta purgatze-dorrearen kokapen erlatiboak ez ditu betetzen \"Geruza bakandurik ez\" funtzioaren baldintzak. Doitu haien kokapen erlatiboa, jaitsi modeloaren altuera edo desaktibatu \"Geruza bakandurik ez\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " baztertze-eremutik gertuegi dago; talkak egon daitezke inprimatzean." @@ -12426,6 +12486,9 @@ msgstr "Erabili 3MF G-codearen ordez" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Gaitu aukera hau inprimagailuak 3MF fitxategi bat inprimatze-lan gisa onartzen badu. Gaituta dagoenean, OrcaSlicerrek xerratutako fitxategia .gcode.3mf gisa bidaltzen du, .gcode fitxategi arrunt baten ordez." +msgid "Printer Agent" +msgstr "Inprimagailu-agentea" + msgid "Select the network agent implementation for printer communication." msgstr "Hautatu inprimagailuarekin komunikatzeko sare-agentearen inplementazioa." @@ -13473,6 +13536,10 @@ msgstr "Lerrozuzen lerrokatua" msgid "Concentric" msgstr "Kontzentrikoa" +# AI Translated +msgid "Spiral Inset" +msgstr "Kiribil-barneratzea" + msgid "Hilbert Curve" msgstr "Hilbert kurba" @@ -13558,26 +13625,26 @@ msgstr "Goiko gainazala betetzeko ordena" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Goiko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n" -"Kanporanzkoa erdialdean hasten da, beraz, gehiegizko materiala gutxien ikusten den ertzera bultzatzen da. Barruranzkoa ertzean hasten da eta erdian kurba estuekin amaitzen da.\n" -"Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen." +"Goiko gainazalak zein norabidetan betetzen diren erdigunetik abiatzen den patroi bat erabiltzean (Kontzentrikoa, Kiribil-barneratzea, Arkimedesen kordak, Oktagrama-kiribila).\n" +"Kanporantz gainazalaren erdigunean hasten da, eta, hala, soberako materiala ertzerantz bultzatzen da, non gutxien ikusten den. Barrurantz ertzean hasten da eta erdiguneko kurba estuekin amaitzen da.\n" +"Lehenetsia bide laburrenaren ordena erabiltzen du, eta bi norabideetako edozeinetan joan daiteke." msgid "Bottom surface fill order" msgstr "Beheko gainazala betetzeko ordena" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n" -"Barruranzkoa hasten da gainazal bakoitza kanpoko kurba zabalagoekin, eta horrek lehen geruzaren atxikimendua hobetzen du erdiko kurba estuak itsatsi ez daitezkeen inprimatze-plaketan. Kanporanzkoa erdialdean hasten da, gehiegizko materiala ertzera bultzatuz.\n" -"Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen." +"Beheko gainazalak zein norabidetan betetzen diren erdigunetik abiatzen den patroi bat erabiltzean (Kontzentrikoa, Kiribil-barneratzea, Arkimedesen kordak, Oktagrama-kiribila).\n" +"Barrurantz gainazal bakoitza kanpoko kurba zabalagoekin hasten da, eta horrek lehen geruzaren itsaspena hobetzen du erdiguneko kurba estuak ondo itsasten ez diren oheetan. Kanporantz erdigunean hasten da, eta soberako materiala ertzerantz bultzatzen du.\n" +"Lehenetsia bide laburrenaren ordena erabiltzen du, eta bi norabideetako edozeinetan joan daiteke." # AI Translated msgid "Internal solid infill pattern" @@ -13679,6 +13746,14 @@ msgstr "Erlojuaren kontrako noranzkoa" msgid "Clockwise" msgstr "Erlojuaren noranzkoa" +# AI Translated +msgid "Distance to rod" +msgstr "Barrarainoko distantzia" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Pitaren muturretik barraren urrunen dagoen ertzerainoko distantzia horizontala. Objektuka inprimatzean talkak saihesteko erabiltzen da." + msgid "Height to rod" msgstr "Hagaxkarainoko altuera" @@ -15833,6 +15908,20 @@ msgstr "Detektatu irtengune-hormak" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Honek irtenguneen ehunekoa detektatzen du lerro-zabalerarekiko eta abiadura desberdina erabiltzen du. 100%%-eko irtengunean zubi-abiadura erabiltzen da." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Inprimatu azkenik euskarririk gabeko hormak" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Erabat airean dauden hormako begiztak zerbaitek eutsi diezaiekeenean inprimatzen dira:\n" +"beren uhartearen gainerako hormen ondoren estruitzen dira, barrukoenetik hasita, hormen ordena edozein dela ere.\n" +"Geruza honetako zubiek soilik ainguratu dezaketen begizta batek zubi horiek inprimatu arte itxaroten du; euskarria duen horma baten ondotik doan begiztak, berriz, betegarriaren aurreko lekuari eusten dio, betegarriak aingura gisa behar baitu." + msgid "Outer walls" msgstr "Kanpoko hormak" @@ -16262,6 +16351,39 @@ msgstr "Garbitu begiztetan" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Begizta itxiko estrusio batean josturaren ikusgarritasuna minimizatzeko, barruranzko mugimendu txiki bat egiten da estrusoreak begizta utzi aurretik." +# AI Translated +msgid "Wipe inward" +msgstr "Purgatu barrurantz" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Kanpoko hormei soilik aplikatzen zaie, zuloen mugak barne. Purgatzean pita beroa jada inprimatutako barruko hormetarantz mugitzen du, inprimatu berri den plastikoa berriro berotzea eta jostura-markak murrizteko.\n" +"\n" +"Bereziki erabilgarria da 0,1 mm-tik beherako geruza-altueretan, non purgatze-markak nabarmenago ikusten diren.\n" +"\n" +"Purgatze arrunta erabiltzen du ondoko barruko hormarik jada inprimatuta ez badago (horma bakarreko eremuak edo Kanpokoa/Barrukoa hormen ordena) edo euskarria duen barrurako biderik aurkitzen ez bada, adibidez izkina estuetan edo josturako hutsuneetan." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Barrurako purgatze-distantzia" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Purgatze-bidea kanpoko perimetrotik zenbat desplazatzen den, milimetrotan edo kanpoko hormaren benetako estrusio-zabaleraren ehuneko gisa adierazita.\n" +"\n" +"Adibidez, 50% bideak kanpoko hormaren zabaleraren erdia desplazatzen du. Desplazamendu eraginkorra mugatuta dago bai kanpoko hormaren benetako zabaleragatik bai ondoko hormarainoko tarte erabilgarriagatik; beraz, 100% baino handiagoko balioek edo baliokidea den distantzia absolutu batek ez dute eragin gehigarririk. Ezarri 0 desplazamendua desgaitzeko." + msgid "Wipe before external loop" msgstr "Garbitu kanpoko begizta baino lehen" @@ -16521,8 +16643,9 @@ msgstr "Hartu erreminta berria inprimatze-tenperaturara iritsi arte itxaron gabe msgid "No sparse layers (beta)" msgstr "Geruza bakandurik ez (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Gaituta badago, purgatze-dorrea ez da inprimatuko tresna-aldaketarik ez duten geruzetan. Tresna-aldaketa duten geruzetan, estrusorea beherantz mugituko da purgatze-dorrea inprimatzeko. Erabiltzailearen ardura da inprimaketarekin talkarik ez dagoela ziurtatzea." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Gaituz gero, purgatze-dorrea ez da inprimatuko erreminta-aldaketarik ez duten geruzetan. Erreminta-aldaketa duten geruzetan, estrusorea behera joango da purgatze-dorrea inprimatzera; beraz, dorrea modeloaren azpian geratzen da eta inprimatze-buruak beheraino iritsi behar du. Jada inprimatutako objektu batekin talka egingo luketen antolamenduak baztertu egiten dira. Ez du eraginik timelapse leunarekin edo pitaren pilaketa-detekzioarekin, horiek geruza guztietan dorrea behar baitute." msgid "Prime all printing extruders" msgstr "Primatu inprimatzeko estrusore guztiak" @@ -16545,6 +16668,34 @@ msgstr "" msgid "Cyclic" msgstr "Ziklikoa" +# AI Translated +msgid "Cyclic order" +msgstr "Ordena ziklikoa" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Erreminta-aldaketen ordena ziklikoak erabiltzen duen filamentu-sekuentzia pertsonalizatua, filamentu-zenbakiak komaz bereizita (adib. \"3,2,1,4\").\n" +"Geruza bakoitzak sekuentzia horri jarraituz inprimatzen ditu bere filamentuak; zerrendatu gabeko filamentuak azkenik inprimatzen dira, gorantz ordenatuta.\n" +"Utzi hutsik filamentuak gorantz ordenatuta zeharkatzeko." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Aplikatu ordena ziklikoa lehen geruzari" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Erreminta-aldaketen ordena ziklikoa lehen geruzari ere aplikatzen dio.\n" +"Lehenespenez desgaituta dago, lehen geruza ohean ahalik eta ondoen itsasteko ordenatzen baita: lehen geruzako elementu txiki eta hauskorrak inprimatzen dituzten filamentuak azkenik inprimatzen dira, hala ondorengo erreminta-aldaketek eta desplazamenduek nekezago askatuko baitituzte ahul ainguratutako zati horiek. Lehen geruzaren ordena horrek lehen geruzarako filamentu-sekuentzia pertsonalizatua ere errespetatzen du, ezarrita badago. Ordena ziklikoaren onura (erreminta-aldaketa gehigarriek geruza bakoitzari hozteko denbora gehiago ematen diote) ez da lehen geruzari aplikatzen, itsaspenagatik astiro eta bero inprimatzen baita.\n" +"Gaitu hau soilik geruza guztietan, lehena barne, erreminta-sekuentzia zehatz-mehatz bera behar baduzu, itsaspen-optimizazio hori galtzearen truke." + msgid "Slice gap closing radius" msgstr "Xerraketan tartea ixteko erradioa" @@ -16554,9 +16705,6 @@ msgstr "Tartea ixteko erradioaren bikoitza baino txikiagoak diren pitzadurak bet msgid "Slicing Mode" msgstr "Xerratze-modua" -msgid "Other" -msgstr "Bestelakoak" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Erabili \"Bikoiti-bakoiti\" 3DLabPrint hegazkin-modeloetarako. Erabili \"Itxi zuloak\" modeloko zulo guztiak ixteko." @@ -17539,6 +17687,14 @@ msgstr "Egiaztapenik ez" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Ez exekutatu baliozkotasun-egiaztapenik, hala nola G-code bideen gatazken egiaztapena." +# AI Translated +msgid "Strict mode" +msgstr "Modu zorrotza" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Zerorik bestelako kode batekin irteten da xerratzeak larria ez den abisu bat sortzen duenean, bestela erregistroan soilik jasoko litzatekeena; adibidez, euskarria behar duen modelo bat euskarria desgaituta dagoenean. Erabili hau inoiz ezkutuko akatsik duen xerratzerik eman behar ez duten CI edo script bidezko prozesuetan. Horrelako abisu bakoitza result.json fitxategiko `warnings` array-an ere zerrendatzen da klase egonkor batekin; fitxategi hori Linuxen soilik idazten da. Ezin da --no-check aukerarekin konbinatu, horrek euskarrien egiaztapena saltatzen baitu." + msgid "Normative check" msgstr "Arauzko egiaztapena" @@ -17551,11 +17707,28 @@ msgstr "Irteerako modeloaren informazioa" msgid "This outputs the model’s information." msgstr "Atera modeloaren informazioa ateratzen du honek." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Aztertu sarea (JSON stdout-era)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Kargatutako objektu bakoitzaren JSON laburpena stdout-era idazten du eta gero irten egiten da: bere muga-kutxak eta jarri daitekeen oskol ganbileko aurpegiak, haien normalak, azalerak eta erdiguneak barne. --ground-* aukerek aurpegi horien artean egiten dute hautua. --info aukeraren ordezko makina-irakurgarria." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Aztertu margoketa (JSON stdout-era)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Kargatutako modeloan jada gordeta dagoen margotutako geruza bakoitzaren (euskarriak, jostura, MMU kolorea, gainazal zimurra) JSON laburpen egituratua idazten du — egoera bakoitzeko aurpegi kopurua, gainazal-azalera eta sarearekiko muga-kutxa — eta gero irten egiten da. Interfazean margoketa-tresnak irekitzearen ordezko makina-irakurgarria." + msgid "Export Settings" msgstr "Esportatu ezarpenak" -msgid "This exports settings to a file." -msgstr "Honek ezarpenak fitxategi batera esportatzen ditu." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Honek ezarpenak fitxategi batera esportatzen ditu. Erabili - stdout-era idazteko." msgid "Send progress to pipe" msgstr "Bidali aurrerapena pipe-ra" @@ -17611,6 +17784,30 @@ msgstr "Biratu Y inguruan" msgid "Rotation angle around the Y axis in degrees." msgstr "Y ardatzaren inguruko biraketa-angelua, gradutan." +# AI Translated +msgid "Ground largest face" +msgstr "Jarri aurpegirik handienaren gainean" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Objektu bakoitza bere oskol ganbileko aurpegirik handienaren gainean jartzen du eta ohera erortzen uzten du. Tamaina bereko aurpegien artean, jada beherantz begira dagoena mantentzen da. Bermatzeko behar bezain aurpegi handirik ez duten objektuak dauden bezala uzten dira. Eraldaketak komando-lerroaren ordenan exekutatzen dira; beraz, aukera honen aurretik emandako biraketak errespetatzen dira. --orient 1 eraldaketa guztien ondoren exekutatzen da eta orientazioa ordezkatzen du." + +# AI Translated +msgid "Ground face by normal" +msgstr "Jarri aurpegiaren gainean normalaren arabera" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Objektu bakoitza kanporako normala NX,NY,NZ norabidetik hurbilen duen oskol ganbileko aurpegiaren gainean jartzen du eta ohera erortzen uzten du. Norabidea objektuaren koordenatuetan adierazten da; horiek aukera honen aurretik emandako biraketak barne hartzen dituzte eta plataformaren ardatzekin bat datoz, sarrerako fitxategiak objektua biratzen ez badu behintzat. Adibidez, 1,0,0 balioak objektua bere +X aldearen gainean jartzen du zutik. --orient 1 eraldaketa guztien ondoren exekutatzen da eta orientazioa ordezkatzen du." + +# AI Translated +msgid "Ground face at point" +msgstr "Jarri puntu bateko aurpegiaren gainean" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Objektu bakoitza X,Y,Z puntua duen oskol ganbileko aurpegiaren gainean jartzen du eta ohera erortzen uzten du. Puntua objektuaren koordenatuetan adierazten da; horiek aukera honen aurretik emandako biraketak barne hartzen dituzte, eta --inspect-mesh aukerak koordenatu horietan ematen ditu aurpegien erdiguneak. Horrelako aurpegirik ez duten objektuak dauden bezala uzten dira, eta exekuzioak huts egiten du objektu bakar batek ere ez badu horrelakorik. --orient 1 eraldaketa guztien ondoren exekutatzen da eta orientazioa ordezkatzen du." + msgid "Scale the model by a float factor." msgstr "Eskalatu modeloa koma mugikorreko faktore baten bidez." @@ -20666,14 +20863,17 @@ msgstr "Ekintza hau ezin da desegin. Jarraitu?" msgid "Skipping objects." msgstr "Objektuak saltatzen." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Material-proportzioa" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Modeloaren altuera" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Proportzioa" msgid "Select Filament" msgstr "Hautatu filamentua" @@ -20916,11 +21116,15 @@ msgstr "Lehortzen-Berotzen" msgid "Drying-Dehumidifying" msgstr "Lehortzen-Hezetasuna kentzen" -msgid " maximum drying temperature is " -msgstr " lehortze-tenperatura maximoa da " +# AI Translated +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s: gehieneko lehortze-tenperatura %d°C da." -msgid " minimum drying temperature is " -msgstr " lehortze-tenperatura minimoa da " +# AI Translated +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s: gutxieneko lehortze-tenperatura %d°C da." msgid "This filament may not be completely dried." msgstr "Baliteke filamentu hau erabat lehortuta ez egotea." @@ -21333,6 +21537,92 @@ msgstr "" "Saihestu okertzea\n" "Ba al zenekien ABS bezalako okertzeko joera duten materialak inprimatzean ohe beroaren tenperatura egoki igotzeak okertzeko probabilitatea murriztu dezakeela?" +#~ msgid "Other" +#~ msgstr "Bestelakoak" + +#~ msgid "Left: " +#~ msgstr "Ezkerra: " + +#~ msgid "Right: " +#~ msgstr "Eskuina: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Gehieneko tenperaturak ezin du hau gainditu: " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Gutxieneko tenperaturak ezin du hau baino txikiagoa izan: " + +#~ msgid "up to" +#~ msgstr "honaino" + +#~ msgid "above" +#~ msgstr "honen gainean" + +#~ msgid "from" +#~ msgstr "hemendik" + +#~ msgid "Configuration package: " +#~ msgstr "Konfigurazio-paketea: " + +#~ msgid " updated to " +#~ msgstr " hona eguneratu da: " + +#~ msgid "Grouping error: " +#~ msgstr "Taldekatze-errorea: " + +#~ msgid " can not be placed in the " +#~ msgstr " ezin da hemen kokatu: " + +#~ msgid " maximum drying temperature is " +#~ msgstr " lehortze-tenperatura maximoa da " + +#~ msgid " minimum drying temperature is " +#~ msgstr " lehortze-tenperatura minimoa da " + +# AI Translated +#~ msgid "needs" +#~ msgstr "honakoa behar du:" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "ez dago gaituta" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "materiala ez dago argitaratuta" + +#~ msgid "Select the language" +#~ msgstr "Hautatu hizkuntza" + +#~ msgid "Select plugin" +#~ msgstr "Hautatu plugina" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Goiko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n" +#~ "Kanporanzkoa erdialdean hasten da, beraz, gehiegizko materiala gutxien ikusten den ertzera bultzatzen da. Barruranzkoa ertzean hasten da eta erdian kurba estuekin amaitzen da.\n" +#~ "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Beheko gainazalak betetzen diren noranzkoa zentroan oinarritutako patroia erabiltzen denean (Kontzentrikoa, Arkimedesen kordak, Oktagrama-kiribila).\n" +#~ "Barruranzkoa hasten da gainazal bakoitza kanpoko kurba zabalagoekin, eta horrek lehen geruzaren atxikimendua hobetzen du erdiko kurba estuak itsatsi ez daitezkeen inprimatze-plaketan. Kanporanzkoa erdialdean hasten da, gehiegizko materiala ertzera bultzatuz.\n" +#~ "Lehenetsiak bide laburreneko ordena erabiltzen du, zeina norabide batean zein bestean ibil daitekeen." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Gaituta badago, purgatze-dorrea ez da inprimatuko tresna-aldaketarik ez duten geruzetan. Tresna-aldaketa duten geruzetan, estrusorea beherantz mugituko da purgatze-dorrea inprimatzeko. Erabiltzailearen ardura da inprimaketarekin talkarik ez dagoela ziurtatzea." + +#~ msgid "This exports settings to a file." +#~ msgstr "Honek ezarpenak fitxategi batera esportatzen ditu." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Waylanden jatorrizko zuzeneko ikuspegiak GStreamer GTK bideo-hustubidea behar du. Instalatu GStreamerrerako gtksink plugina eta berrabiarazi OrcaSlicer." diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 9d8739babe..3d410daf6e 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril, Thomas Lété\n" @@ -2414,13 +2414,6 @@ msgstr "Une mise à jour est disponible. Ouvrez la boîte de dialogue du paquet msgid "%s has been removed." msgstr "%s a été supprimé." - -msgid "Select the language" -msgstr "Sélectionner la langue" - -msgid "Language" -msgstr "Langue" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Le passage d’Orca Slicer à la langue %s a échoué." @@ -3635,11 +3628,15 @@ msgstr "Rétracter le filament actuel au Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Changer de voie au Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "La température maximale ne peut pas dépasser " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "La température maximale ne peut pas dépasser %d" -msgid "The minmum temperature should not be less than " -msgstr "La température minimale ne doit pas être inférieure à " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "La température minimale ne doit pas être inférieure à %d" msgid "Type to filter..." msgstr "Saisissez du texte pour filtrer…" @@ -4507,6 +4504,15 @@ msgstr "" "La copie du G-code temporaire vers le G-code de sortie a échoué. La carte SD est peut-être bloquée en écriture ?\n" "Message d’erreur : %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"La copie du G-code temporaire vers le G-code de sortie a échoué.\n" +"Message d'erreur : %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "La copie du G-code temporaire vers le G-code de sortie a échoué. Il se peut qu’il y ait un problème avec le dispositif cible, veuillez essayer d’exporter à nouveau ou d’utiliser un autre périphérique. Le G-code de sortie corrompu se trouve dans %1%.tmp." @@ -5240,10 +5246,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "La valeur %s est hors plage. La plage valide est comprise entre %d et %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Est-ce %s%% ou %s %s ?" +msgid "Is it %s%% or %s %s?" +msgstr "Est-ce %s%% ou %s %s ?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5269,22 +5276,18 @@ msgstr "Format invalide. Format vectoriel attendu : \"%1%\"" msgid "System agents" msgstr "Agents système" -# AI Translated -msgid "No plugin selected" -msgstr "Aucun plugin sélectionné" - # AI Translated msgid "Add plugin" msgstr "Ajouter un plugin" -# AI Translated -msgid "Select plugin" -msgstr "Sélectionner un plugin" - # AI Translated msgid "Remove plugin" msgstr "Supprimer le plugin" +# AI Translated +msgid "No plugin selected" +msgstr "Aucun plugin sélectionné" + # AI Translated msgid "Configure" msgstr "Configurer" @@ -5540,14 +5543,20 @@ msgstr "Définir comme optimal" msgid "Regroup filament" msgstr "Regrouper les filaments" -msgid "up to" -msgstr "jusqu’à" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "jusqu’à %1% mm" -msgid "above" -msgstr "plus que" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "au-dessus de %1% mm" -msgid "from" -msgstr "de" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "de %1% à %2% mm" msgid "Usage" msgstr "Utilisation" @@ -5905,7 +5914,7 @@ msgstr "Volume :" msgid "Size:" msgstr "Taille :" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Des conflits de chemins G-code ont été trouvés au niveau de la couche %d, z = %.2lfmm. Veuillez séparer davantage les objets en conflit (%s <-> %s)." @@ -6217,11 +6226,13 @@ msgstr "Enregistrer le projet sous" msgid "Save current project as" msgstr "Enregistrer le projet actuel sous" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Publier 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Exporter un fichier 3MF avec les réglages sélectionnés intégrés" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importer des fichiers 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7484,6 +7495,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inférieur" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Ce réglage ne précise pas de type de capacité de plugin." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Ce réglage précise un type de capacité de plugin non reconnu : " + # AI Translated msgid "Plugin Selection" msgstr "Sélection des plugins" @@ -8044,11 +8063,13 @@ msgstr "Veuillez vous assurer que les G-codes de ces préréglages sont sûrs af msgid "Customized Preset" msgstr "Préréglage personnalisé" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Certains réglages publiés n'ont pas pu être appliqués :" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Certains emplacements de filament ont été modifiés :" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Le nom des composants dans le fichier STEP n'est pas au format UTF-8 !" @@ -8451,13 +8472,17 @@ msgstr "Enregistrer le fichier découpé sous :" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Le fichier %s a été envoyé vers l'espace de stockage de l'imprimante et peut être visualisé sur l'imprimante." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Publier le fichier 3MF sous :" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Échec de l'exportation du fichier 3MF publié.\n" +"Veuillez vérifier si le dossier existe en ligne ou si d'autres programmes ont le fichier ouvert." msgid "Publish" msgstr "Publier" @@ -8672,7 +8697,6 @@ msgstr "Voulez-vous continuer ?" msgid "Language selection" msgstr "Sélection de la langue" - msgid "Asia-Pacific" msgstr "Asie-Pacifique" @@ -8777,6 +8801,9 @@ msgstr "Chemin d’accès à l’instance courante : " msgid "General" msgstr "Général" +msgid "Language" +msgstr "Langue" + msgid "Metric" msgstr "Métrique" @@ -9207,9 +9234,6 @@ msgstr "Lors du défilement du curseur de couche dans l'aperçu découpé, affic msgid "Dimmed layer brightness" msgstr "Luminosité des couches assombries" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9606,63 +9630,80 @@ msgstr "Téléversement des données" msgid "Jump to webpage" msgstr "Ouvrir la page internet" +# AI Translated msgid "Material" -msgstr "" +msgstr "Matériau" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filament mixte" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Certains filaments mixtes dépendent de filaments qui ne seront pas publiés :" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (mixte)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% nécessite %2%, qui n'est pas activé." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% nécessite %2%, dont le matériau ne sera pas publié." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Pour publier un filament mixte, activez chacun des filaments qu'il utilise et choisissez Publication complète ou satisfaites son exigence de Type." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Publier quand même" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Publier 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Sélectionnez les réglages à publier dans le fichier 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki de Publier 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Guide vidéo de Publier 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filament mixte - publié dans son ensemble lorsque « Activer » est coché ci-dessus" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Publier ce filament mixte, puis activer + publier entièrement ses filaments composants" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Publier cet emplacement de filament dans le fichier 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Publication complète" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Intégrer l'ensemble du filament de cet emplacement dans le fichier 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtrer les éléments non sélectionnés" #, c-format, boost-format msgid "Save %s as" @@ -9681,6 +9722,10 @@ msgstr "Copie dans ce préréglage toutes les valeurs héritées du préréglage msgid "Detach from parent" msgstr "Détacher du parent" +# AI Translated +msgid "Save without parent" +msgstr "Enregistrer sans parent" + # AI Translated msgid "Unique preset" msgstr "Préréglage unique" @@ -10382,9 +10427,17 @@ msgstr "Une tour d'amorçage est requise pour la détection d'agglomération. Il msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "L'activation simultanée de la hauteur Z précise et de la tour d'amorçage peut provoquer des erreurs de tranchage. Voulez-vous quand même activer la hauteur Z précise ?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Le timelapse fluide nécessite une tour d’amorçage à chaque couche, ce qui est incompatible avec « Pas de couches éparses ». « Pas de couches éparses » a été désactivé." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Une tour d’amorçage est requise pour le mode timelapse fluide. Le modèle peut présenter des défauts sans tour d’amorçage. Voulez-vous activer la tour d’amorçage ?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "« Pas de couches éparses » est incompatible avec le timelapse fluide, qui nécessite une tour d’amorçage à chaque couche. Le timelapse est repassé en mode traditionnel." + msgid "Still print by object?" msgstr "Vous imprimez toujours par objet ?" @@ -10753,9 +10806,6 @@ msgstr "Profils de traitement compatibles" msgid "Printable space" msgstr "Espace imprimable" -msgid "Printer Agent" -msgstr "Agent d'imprimante" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Sélectionner l'implémentation de l'agent réseau pour la communication avec l'imprimante. Les agents disponibles sont enregistrés au démarrage." @@ -11154,12 +11204,6 @@ msgstr "Nombre d'extrudeurs" msgid "Capabilities" msgstr "Fonctionnalités" -msgid "Left: " -msgstr "Gauche : " - -msgid "Right: " -msgstr "Droite : " - msgid "Show all presets (including incompatible)" msgstr "Afficher tous les préréglages (y compris incompatibles)" @@ -11993,15 +12037,22 @@ msgstr "Réparation annulée" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Échec de la copie du fichier %1% vers %2% : %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Téléchargement des nouveaux profils de fabricant : " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Paquet de configuration : %1% mis à jour en %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Échec du téléchargement des profils de fabricant : " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Besoin de vérifier les modifications non enregistrées avant les mises à jour de configuration." -msgid "Configuration package: " -msgstr "Paquet de configuration : " - -msgid " updated to " -msgstr " mis à jour en " - msgid "Open G-code file:" msgstr "Ouvrir un fichier G-code :" @@ -12061,11 +12112,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "La mise en forme du signal n’est prise en charge que par Klipper, RepRapFirmware et Marlin 2" -msgid "Grouping error: " -msgstr "Erreur de regroupement : " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Erreur de regroupement : %1% ne peut pas être placé dans la buse gauche" -msgid " can not be placed in the " -msgstr " ne peut pas être placé dans le/la " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Erreur de regroupement : %1% ne peut pas être placé dans la buse droite" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12179,6 +12234,10 @@ msgstr "%1% est trop proche des autres, cela pourrait provoquer des collisions." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% est trop grand, cela pourrait provoquer des collisions." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "La position relative du modèle et de la tour d’amorçage ne répond pas aux exigences de la fonction « Pas de couches éparses ». Veuillez ajuster leurs positions relatives, réduire la hauteur du modèle ou désactiver « Pas de couches éparses »." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " est trop proche d'une zone d'exclusion, il peut y avoir des collisions lors de l'impression." @@ -12522,6 +12581,9 @@ msgstr "Utiliser le 3MF au lieu du G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Activez ceci si l’imprimante accepte un fichier 3MF comme tâche d’impression. Lorsque cette option est activée, Orca Slicer envoie le fichier découpé au format .gcode.3mf au lieu d’un simple fichier .gcode." +msgid "Printer Agent" +msgstr "Agent d'imprimante" + msgid "Select the network agent implementation for printer communication." msgstr "Sélectionner l'implémentation de l'agent réseau pour la communication avec l'imprimante." @@ -13567,6 +13629,10 @@ msgstr "Rectiligne Aligné" msgid "Concentric" msgstr "Concentrique" +# AI Translated +msgid "Spiral Inset" +msgstr "Spirale décalée" + msgid "Hilbert Curve" msgstr "Courbe de Hilbert" @@ -13658,13 +13724,13 @@ msgstr "Ordre de remplissage de la surface supérieure" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direction dans laquelle les surfaces supérieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n" -"Vers l'extérieur commence au centre de la surface, de sorte que tout excès de matière est poussé vers le bord où il est le moins visible. Vers l'intérieur commence au bord et se termine par les courbes serrées au centre.\n" -"Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens." +"Sens dans lequel les surfaces supérieures sont remplies avec un motif partant du centre (Concentrique, Spirale décalée, Spirale d'Archimède, Spirale Octagramme).\n" +"Vers l'extérieur commence au centre de la surface, ce qui repousse l'excédent de matière vers le bord, là où il est le moins visible. Vers l'intérieur commence au bord et se termine par les courbes serrées du centre.\n" +"Défaut utilise l'ordre du chemin le plus court, qui peut aller dans un sens comme dans l'autre." # AI Translated msgid "Bottom surface fill order" @@ -13672,13 +13738,13 @@ msgstr "Ordre de remplissage de la surface inférieure" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direction dans laquelle les surfaces inférieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n" -"Vers l'intérieur commence chaque surface par les courbes extérieures plus larges, ce qui améliore l'adhérence de la première couche sur les plateaux où les courbes serrées au centre peuvent ne pas adhérer. Vers l'extérieur commence au centre, poussant tout excès de matière vers le bord.\n" -"Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens." +"Sens dans lequel les surfaces inférieures sont remplies avec un motif partant du centre (Concentrique, Spirale décalée, Spirale d'Archimède, Spirale Octagramme).\n" +"Vers l'intérieur commence chaque surface par les courbes extérieures les plus larges, ce qui améliore l'adhérence de la couche initiale sur les plateaux où les courbes serrées du centre risquent de ne pas accrocher. Vers l'extérieur commence au centre et repousse l'excédent de matière vers le bord.\n" +"Défaut utilise l'ordre du chemin le plus court, qui peut aller dans un sens comme dans l'autre." msgid "Internal solid infill pattern" msgstr "Motif de remplissage plein interne" @@ -13777,6 +13843,14 @@ msgstr "Sens inverse des aiguilles d’une montre" msgid "Clockwise" msgstr "Dans le sens des aiguilles d’une montre" +# AI Translated +msgid "Distance to rod" +msgstr "Distance à la tige" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Distance horizontale entre la pointe de la buse et le bord le plus éloigné de la tige. Utilisée pour éviter les collisions lors de l'impression par objet." + msgid "Height to rod" msgstr "Hauteur jusqu’à la tige" @@ -15929,6 +16003,20 @@ msgstr "Détecter les parois en surplomb" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Détectez le pourcentage de surplomb par rapport à la largeur de la ligne et utilisez une vitesse différente pour imprimer. Pour un surplomb de 100%% la vitesse du pont est utilisée." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Imprimer les parois sans support en dernier" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Les boucles de paroi entièrement en l'air ne sont imprimées qu'une fois que quelque chose peut les soutenir :\n" +"elles sont extrudées après les autres parois de leur îlot, la plus intérieure d'abord, quel que soit l'ordre des parois.\n" +"Une boucle que seuls les ponts de cette couche peuvent ancrer attend que ces ponts soient imprimés, tandis qu'une boucle longeant une paroi soutenue garde sa place avant le remplissage, qui en a besoin comme ancrage." + msgid "Outer walls" msgstr "Parois extérieures" @@ -16365,6 +16453,39 @@ msgstr "Essuyer sur les boucles" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Pour minimiser la visibilité de la couture dans une extrusion en boucle fermée, un petit mouvement vers l’intérieur est exécuté avant que la buse ne quitte la boucle." +# AI Translated +msgid "Wipe inward" +msgstr "Essuyage vers l'intérieur" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"S'applique uniquement aux parois extérieures, contours des trous compris. Déplace la buse chaude vers les parois intérieures déjà imprimées pendant l'essuyage, afin de limiter le réchauffement du plastique fraîchement déposé et les marques de couture.\n" +"\n" +"Particulièrement utile pour des hauteurs de couche inférieures à 0,1 mm, où les marques d'essuyage sont plus visibles.\n" +"\n" +"Utilise l'essuyage normal si aucune paroi intérieure adjacente n'est déjà imprimée (zones à paroi unique ou ordre des parois Extérieur/Intérieur), ou si aucun chemin vers l'intérieur soutenu n'est trouvé, par exemple dans les angles serrés ou aux interruptions de couture." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Distance d'essuyage vers l'intérieur" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Distance dont le chemin d'essuyage est décalé par rapport au périmètre extérieur, exprimée en millimètres ou en pourcentage de la largeur d'extrusion réelle de la paroi extérieure.\n" +"\n" +"Par exemple, 50% décale le chemin de la moitié de la largeur de la paroi extérieure. Le décalage effectif est limité à la fois par la largeur réelle de la paroi extérieure et par l'espace disponible jusqu'à la paroi adjacente : les valeurs supérieures à 100% ou une distance absolue équivalente n'ont donc aucun effet supplémentaire. Mettez 0 pour désactiver le décalage." + msgid "Wipe before external loop" msgstr "Essuyer avant la boucle externe" @@ -16626,8 +16747,9 @@ msgstr "Prend le nouvel outil sans attendre qu’il atteigne la température d msgid "No sparse layers (beta)" msgstr "Pas de couches éparses (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Si cette option est activée, la tour d’essuyage ne sera pas imprimée sur les couches sans changement d’outil. Sur les couches avec changement d’outil, l’extrudeur se déplacera vers le bas pour imprimer la tour d’essuyage. L’utilisateur est responsable de s’assurer qu’il n’y a pas de collision avec l’impression." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Si cette option est activée, la tour d'essuyage n'est pas imprimée sur les couches sans changement d'outil. Sur les couches comportant un changement d'outil, l'extrudeur descend pour imprimer la tour d'essuyage : la tour se retrouve donc sous le modèle et la tête d'outil doit descendre jusqu'à elle. Les dispositions où cela entrerait en collision avec un objet déjà imprimé sont rejetées. Sans effet avec le timelapse fluide ou la détection d'agglomération de la buse, qui nécessitent une tour à chaque couche." msgid "Prime all printing extruders" msgstr "Amorcer tous les extrudeurs d’impression" @@ -16653,6 +16775,34 @@ msgstr "" msgid "Cyclic" msgstr "Cyclique" +# AI Translated +msgid "Cyclic order" +msgstr "Ordre cyclique" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Séquence de filaments personnalisée utilisée par l'ordre cyclique des changements d'outil, sous forme de numéros de filament séparés par des virgules (par ex. « 3,2,1,4 »).\n" +"Chaque couche imprime ses filaments en suivant cette séquence ; les filaments non listés sont imprimés en dernier, par ordre croissant.\n" +"Laissez vide pour parcourir les filaments par ordre croissant." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Appliquer l'ordre cyclique à la couche initiale" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Applique également l'ordre cyclique des changements d'outil à la couche initiale.\n" +"Cette option est désactivée par défaut, car la couche initiale est au contraire ordonnée pour la meilleure adhérence au plateau : les filaments qui impriment de petits détails fragiles de la couche initiale sont imprimés en dernier, si bien que les changements d'outil et déplacements suivants risquent moins de décoller ces parties faiblement ancrées. Cet ordre de la couche initiale respecte aussi une séquence de filaments personnalisée pour la couche initiale lorsqu'elle est définie. L'avantage de l'ordre cyclique (les changements d'outil supplémentaires laissent à chaque couche plus de temps pour refroidir) ne s'applique pas à la couche initiale, imprimée lentement et à chaud pour l'adhérence.\n" +"N'activez cette option que si vous avez besoin exactement de la même séquence d'outils sur chaque couche, y compris la première, au prix de cette optimisation de l'adhérence." + msgid "Slice gap closing radius" msgstr "Rayon de fermeture de l’écart des tranches" @@ -16662,9 +16812,6 @@ msgstr "Les fissures plus petites que 2x le rayon de fermeture de l’espace son msgid "Slicing Mode" msgstr "Mode de découpe" -msgid "Other" -msgstr "Autre" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez « Fermer les trous » pour fermer tous les trous du modèle." @@ -17651,6 +17798,14 @@ msgstr "Pas de vérification" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Ne pas effectuer de contrôle de validité, tel que le contrôle des conflits de parcours de G-code." +# AI Translated +msgid "Strict mode" +msgstr "Mode strict" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Termine avec un code de retour non nul lorsque le découpage émet un avertissement non critique qui ne serait autrement que consigné, par exemple un modèle nécessitant des supports alors que les supports sont désactivés. À utiliser en intégration continue ou dans des chaînes de traitement automatisées qui ne doivent jamais livrer un découpage subtilement défectueux. Chacun de ces avertissements est également listé avec une classe stable dans le tableau `warnings` de result.json, écrit uniquement sous Linux. Ne peut pas être combiné avec --no-check, qui saute la vérification des supports." + msgid "Normative check" msgstr "Contrôle normatif" @@ -17663,11 +17818,28 @@ msgstr "Information du Modèle de Sortie" msgid "This outputs the model’s information." msgstr "Sortie des informations du modèle." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Inspecter le maillage (JSON sur stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Affiche sur stdout un résumé JSON de chaque objet chargé, puis quitte : ses boîtes englobantes et les faces de son enveloppe convexe sur lesquelles il peut reposer, avec leurs normales, aires et centres. Ce sont les faces parmi lesquelles choisissent les options --ground-*. Alternative exploitable par une machine à --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Inspecter la peinture (JSON sur stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Affiche un résumé JSON structuré de chaque couche peinte (supports, couture, couleur MMU, surface irrégulière) déjà enregistrée sur le modèle chargé — nombre de facettes, aire de surface et boîte englobante locale au maillage pour chaque état — puis quitte. Alternative exploitable par une machine à l'ouverture des gizmos de peinture dans l'interface." + msgid "Export Settings" msgstr "Paramètres d'exportation" -msgid "This exports settings to a file." -msgstr "Exporter les paramètres vers un fichier." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Exporte les réglages vers un fichier. Utilisez - pour les écrire sur stdout." msgid "Send progress to pipe" msgstr "Envoyer la progression à la queue" @@ -17723,6 +17895,30 @@ msgstr "Rotation autour de l’axe Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Angle de rotation autour de l’axe Y en degrés." +# AI Translated +msgid "Ground largest face" +msgstr "Poser sur la plus grande face" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Pose chaque objet sur la plus grande face de son enveloppe convexe et le fait tomber sur le plateau. Parmi des faces de même taille, celle déjà tournée vers le bas est conservée. Les objets dépourvus d'une face assez grande pour reposer dessus sont laissés tels quels. Les transformations s'appliquent dans l'ordre de la ligne de commande : les rotations indiquées avant cette option sont donc respectées. --orient 1 s'exécute après toutes les transformations et remplace l'orientation." + +# AI Translated +msgid "Ground face by normal" +msgstr "Poser sur la face selon la normale" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Pose chaque objet sur la face de son enveloppe convexe dont la normale extérieure est la plus proche de la direction NX,NY,NZ et le fait tomber sur le plateau. La direction est exprimée dans les coordonnées de l'objet, qui incluent les rotations indiquées avant cette option et correspondent aux axes du plateau, sauf si le fichier d'entrée fait pivoter l'objet. Par exemple, 1,0,0 pose l'objet sur sa face +X. --orient 1 s'exécute après toutes les transformations et remplace l'orientation." + +# AI Translated +msgid "Ground face at point" +msgstr "Poser sur la face en un point" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Pose chaque objet sur la face de son enveloppe convexe qui contient le point X,Y,Z et le fait tomber sur le plateau. Le point est exprimé dans les coordonnées de l'objet, qui incluent les rotations indiquées avant cette option ; --inspect-mesh donne les centres des faces dans ces coordonnées. Les objets dépourvus d'une telle face sont laissés tels quels, et l'exécution échoue si aucun objet n'en possède. --orient 1 s'exécute après toutes les transformations et remplace l'orientation." + msgid "Scale the model by a float factor." msgstr "Mettre à l'échelle le modèle par un facteur flottant" @@ -20778,14 +20974,17 @@ msgstr "Cette action ne peut pas être annulée. Continuer ?" msgid "Skipping objects." msgstr "Ignorer des objets." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Proportion de matériau" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Hauteur du modèle" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Proportion" msgid "Select Filament" msgstr "Sélectionner le filament" @@ -21041,12 +21240,14 @@ msgid "Drying-Dehumidifying" msgstr "Séchage - Déshumidification" # AI Translated -msgid " maximum drying temperature is " -msgstr " la température de séchage maximale est de " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "La température de séchage maximale de %s est de %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " la température de séchage minimale est de " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "La température de séchage minimale de %s est de %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -21491,6 +21692,95 @@ msgstr "" "Éviter la déformation\n" "Saviez-vous que lors de l’impression de matériaux susceptibles de se déformer, tels que l’ABS, une augmentation appropriée de la température du plateau chauffant peut réduire la probabilité de déformation?" +#~ msgid "Other" +#~ msgstr "Autre" + +#~ msgid "Left: " +#~ msgstr "Gauche : " + +#~ msgid "Right: " +#~ msgstr "Droite : " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "La température maximale ne peut pas dépasser " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "La température minimale ne doit pas être inférieure à " + +#~ msgid "up to" +#~ msgstr "jusqu’à" + +#~ msgid "above" +#~ msgstr "plus que" + +#~ msgid "from" +#~ msgstr "de" + +#~ msgid "Configuration package: " +#~ msgstr "Paquet de configuration : " + +#~ msgid " updated to " +#~ msgstr " mis à jour en " + +#~ msgid "Grouping error: " +#~ msgstr "Erreur de regroupement : " + +#~ msgid " can not be placed in the " +#~ msgstr " ne peut pas être placé dans le/la " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " la température de séchage maximale est de " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " la température de séchage minimale est de " + +# AI Translated +#~ msgid "needs" +#~ msgstr "nécessite" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "non activé" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "matériau non publié" + +#~ msgid "Select the language" +#~ msgstr "Sélectionner la langue" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Sélectionner un plugin" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direction dans laquelle les surfaces supérieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n" +#~ "Vers l'extérieur commence au centre de la surface, de sorte que tout excès de matière est poussé vers le bord où il est le moins visible. Vers l'intérieur commence au bord et se termine par les courbes serrées au centre.\n" +#~ "Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direction dans laquelle les surfaces inférieures sont remplies lors de l'utilisation d'un motif centré (Concentrique, Cordes d'Archimède, Spirale d'octogramme).\n" +#~ "Vers l'intérieur commence chaque surface par les courbes extérieures plus larges, ce qui améliore l'adhérence de la première couche sur les plateaux où les courbes serrées au centre peuvent ne pas adhérer. Vers l'extérieur commence au centre, poussant tout excès de matière vers le bord.\n" +#~ "Par défaut utilise un ordonnancement par chemin le plus court, qui peut aller dans les deux sens." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Si cette option est activée, la tour d’essuyage ne sera pas imprimée sur les couches sans changement d’outil. Sur les couches avec changement d’outil, l’extrudeur se déplacera vers le bas pour imprimer la tour d’essuyage. L’utilisateur est responsable de s’assurer qu’il n’y a pas de collision avec l’impression." + +#~ msgid "This exports settings to a file." +#~ msgstr "Exporter les paramètres vers un fichier." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "L’aperçu en direct natif sous Wayland nécessite le récepteur vidéo GStreamer GTK. Veuillez installer le plugin gtksink pour GStreamer, puis redémarrer OrcaSlicer." diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 198d3decac..bc65ceef4b 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -2460,13 +2460,6 @@ msgstr "Frissítés érhető el. Nyisd meg a beállításcsomag párbeszédablak msgid "%s has been removed." msgstr "%s eltávolítva." - -msgid "Select the language" -msgstr "Válaszd ki a nyelvet" - -msgid "Language" -msgstr "Nyelv" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3710,11 +3703,15 @@ msgstr "Az aktuális filament visszahúzása a Filament Track Switch-nél" msgid "Switch track at Filament Track Switch" msgstr "Sáv váltása a Filament Track Switch-nél" -msgid "The maximum temperature cannot exceed " -msgstr "A maximális hőmérséklet nem haladhatja meg ezt: " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "A maximális hőmérséklet nem haladhatja meg ezt: %d" -msgid "The minmum temperature should not be less than " -msgstr "A minimális hőmérséklet nem lehet kevesebb ennél: " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "A minimális hőmérséklet nem lehet kevesebb ennél: %d" # AI Translated msgid "Type to filter..." @@ -4601,6 +4598,15 @@ msgstr "" "Nem sikerült az ideiglenes G-kódot a kimeneti G-kódba másolni. Lehet, hogy az SD-kártya írásvédett?\n" "Hibaüzenet: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Az ideiglenes G-kód másolása a kimeneti G-kódba nem sikerült.\n" +"Hibaüzenet: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Nem sikerült az ideiglenes G-kódot a kimeneti G-kódba másolni. Probléma lehet a céleszközzel. Kérlek, exportáld újra, vagy használj másik eszközt. A sérült kimeneti G-kód helye: %1%.tmp." @@ -5337,10 +5343,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "%s érték tartományon kívül van. Az érvényes tartomány: %d - %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"%s%% vagy %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "%s%% vagy %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5366,22 +5373,18 @@ msgstr "Érvénytelen formátum. Elvárt vektor formátum: \"%1%\"" msgid "System agents" msgstr "Rendszerügynökök" -# AI Translated -msgid "No plugin selected" -msgstr "Nincs kiválasztott bővítmény" - # AI Translated msgid "Add plugin" msgstr "Bővítmény hozzáadása" -# AI Translated -msgid "Select plugin" -msgstr "Bővítmény kiválasztása" - # AI Translated msgid "Remove plugin" msgstr "Bővítmény eltávolítása" +# AI Translated +msgid "No plugin selected" +msgstr "Nincs kiválasztott bővítmény" + # AI Translated msgid "Configure" msgstr "Konfigurálás" @@ -5637,14 +5640,20 @@ msgstr "Beállítás optimálisra" msgid "Regroup filament" msgstr "Filamentek újracsoportosítása" -msgid "up to" -msgstr "legfeljebb" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "legfeljebb %1% mm" -msgid "above" -msgstr "felett" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "%1% mm felett" -msgid "from" -msgstr "ettől" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "%1% mm-től %2% mm-ig" msgid "Usage" msgstr "Használat" @@ -6005,7 +6014,7 @@ msgstr "Térfogat:" msgid "Size:" msgstr "Méret:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "G-kód útvonalütközés található a(z) %d. rétegen, Z = %.2lfmm. Helyezd távolabb egymástól az ütköző objektumokat (%s <-> %s)." @@ -6319,11 +6328,13 @@ msgstr "Projekt mentése másként" msgid "Save current project as" msgstr "Jelenlegi projekt mentése másként" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "3MF közzététele" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "3MF fájl exportálása a kiválasztott beállítások beágyazásával" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importálás 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7598,6 +7609,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Alsó" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Ez a beállítás nem ad meg bővítményképesség-típust." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Ez a beállítás ismeretlen bővítményképesség-típust ad meg: " + # AI Translated msgid "Plugin Selection" msgstr "Bővítmény kiválasztása" @@ -8159,11 +8178,13 @@ msgstr "Kérlek, győződj meg arról, hogy a beállításokban található G-k msgid "Customized Preset" msgstr "Egyedi beállítás" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Néhány közzétett beállítást nem sikerült alkalmazni:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Néhány filamenthely megváltozott:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "A STEP fájlon belüli komponens neve nem UTF-8 formátumban van!" @@ -8577,13 +8598,17 @@ msgstr "Szeletelt fájl mentése mint:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "A(z) %s fájlt elküldtük a nyomtató tárhelyére. A fájl a nyomtatón tekinthető meg." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "3MF fájl közzététele mint:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"A közzétett 3MF fájl exportálása nem sikerült.\n" +"Ellenőrizd, hogy a mappa elérhető-e online, illetve hogy más program nem tartja-e nyitva a fájlt." msgid "Publish" msgstr "Közzététel" @@ -8800,7 +8825,6 @@ msgstr "Szeretnéd folytatni?" msgid "Language selection" msgstr "Nyelv kiválasztása" - msgid "Asia-Pacific" msgstr "Ázsia-Csendes-óceáni térség" @@ -8905,6 +8929,9 @@ msgstr "Jelenlegi példány útvonala: " msgid "General" msgstr "Általános" +msgid "Language" +msgstr "Nyelv" + msgid "Metric" msgstr "Metrikus" @@ -9349,9 +9376,6 @@ msgstr "A rétegcsúszka mozgatásakor a szeletelt előnézetben az aktuális r msgid "Dimmed layer brightness" msgstr "Elhalványított rétegek fényereje" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9766,63 +9790,80 @@ msgstr "Adatok feltöltése" msgid "Jump to webpage" msgstr "Ugrás a weboldalra" +# AI Translated msgid "Material" -msgstr "" +msgstr "Anyag" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Kevert filament" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Néhány kevert filament olyan filamentektől függ, amelyek nem lesznek közzétéve:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "%d. filament (kevert)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% a következőt igényli: %2%, amely nincs engedélyezve." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% a következőt igényli: %2%, amelynek az anyaga nem lesz közzétéve." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Kevert filament közzétételéhez engedélyezd az összes általa használt filamentet, és válaszd a Teljes közzétételt, vagy teljesítsd a Típus követelményét." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Közzététel mindenképp" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "3MF közzététele..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Válaszd ki, mely beállítások kerüljenek közzétételre a 3MF fájlban" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "3MF közzététele wiki" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "3MF közzététele videós útmutató" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Kevert filament - egészében kerül közzétételre, ha fent az \"Engedélyezve\" be van jelölve" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Ennek a kevert filamentnek a közzététele, valamint az összetevő filamentjeinek engedélyezése + teljes közzététele" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Ennek a filamenthelynek a közzététele a 3MF fájlban" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Teljes közzététel" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Ennek a helynek a teljes filamentjét beágyazza a 3MF fájlba" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Nem kijelöltek szűrése" #, c-format, boost-format msgid "Save %s as" @@ -9841,6 +9882,10 @@ msgstr "Az összes örökölt értéket átmásolja a szülő előbeállításb msgid "Detach from parent" msgstr "Leválasztás a szülőről" +# AI Translated +msgid "Save without parent" +msgstr "Mentés szülő nélkül" + # AI Translated msgid "Unique preset" msgstr "Önálló előbeállítás" @@ -10547,9 +10592,17 @@ msgstr "A csomósodás-észleléshez szükség van a törlőtoronyra. Nélküle msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "A pontos Z magasság és a törlőtorony egyidejű engedélyezése szeletelési hibákat okozhat. Továbbra is engedélyezi a pontos Z magasságot?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "A sima Timelapse-hez minden rétegen törlőtorony kell, ami nem használható a \"Nincsenek ritka rétegek\" beállítással együtt. A \"Nincsenek ritka rétegek\" kikapcsolva." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "A sima Timelapse módhoz törlőtorony szükséges. Nélküle hibák jelenhetnek meg a nyomtatott tárgyon. Bekapcsolod a törlőtornyot?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "A \"Nincsenek ritka rétegek\" nem használható a sima Timelapse-szel, amelyhez minden rétegen törlőtorony kell. A Timelapse hagyományos módra váltott." + msgid "Still print by object?" msgstr "Továbbra is tárgyanként szeretnél nyomtatni?" @@ -10925,9 +10978,6 @@ msgstr "Kompatibilis folyamatprofilok" msgid "Printable space" msgstr "Nyomtatási terület" -msgid "Printer Agent" -msgstr "Nyomtatóügynök" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Válaszd ki a nyomtatóval való kommunikációhoz használt hálózati ügynököt. Az elérhető ügynököket indításkor regisztrálja a rendszer." @@ -11332,14 +11382,6 @@ msgstr "Extruderek száma" msgid "Capabilities" msgstr "Képességek" -# AI Translated -msgid "Left: " -msgstr "Bal: " - -# AI Translated -msgid "Right: " -msgstr "Jobb: " - msgid "Show all presets (including incompatible)" msgstr "Minden beállítás megjelenítése (beleértve az inkompatibiliseket is)" @@ -12183,15 +12225,22 @@ msgstr "Javítás megszakítva" msgid "Copying of file %1% to %2% failed: %3%" msgstr "%1% fájl másolása sikertelen a következő helyre: %2% Hiba: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Új gyártói profilok letöltése: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Konfigurációs csomag: %1% frissítve erre: %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Nem sikerült letölteni a gyártói profilokat: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Kérlek, ellenőrizd a nem mentett módosításokat a konfiguráció frissítése előtt." -msgid "Configuration package: " -msgstr "Konfigurációs csomag: " - -msgid " updated to " -msgstr " frissítve erre: " - msgid "Open G-code file:" msgstr "G-kód fájl megnyitása:" @@ -12251,11 +12300,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "A rezgéskompenzációt csak a Klipper, a RepRapFirmware és a Marlin 2 támogatja" -msgid "Grouping error: " -msgstr "Csoportosítási hiba: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Csoportosítási hiba: %1% nem helyezhető a bal fúvókába" -msgid " can not be placed in the " -msgstr " nem helyezhető ide: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Csoportosítási hiba: %1% nem helyezhető a jobb fúvókába" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12369,6 +12422,10 @@ msgstr "%1% túl közel van más tárgyakhoz, a nyomtatás során előfordulhatn msgid "%1% is too tall, and collisions will be caused." msgstr "%1% túl magas, a nyomtatás során előfordulhatnak ütközések." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "A modell és a törlőtorony egymáshoz viszonyított helyzete nem felel meg a \"Nincsenek ritka rétegek\" funkció követelményeinek. Módosítsd az egymáshoz viszonyított helyzetüket, csökkentsd a modell magasságát, vagy kapcsold ki a \"Nincsenek ritka rétegek\" beállítást." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " túl közel van a tiltott területhez, a nyomtatás során előfordulhatnak ütközések." @@ -12729,6 +12786,9 @@ msgstr "3MF használata G-kód helyett" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Kapcsold be, ha a nyomtató 3MF fájlt fogad el nyomtatási feladatként. Bekapcsolva az Orca Slicer a szeletelt fájlt .gcode.3mf formátumban küldi el egyszerű .gcode fájl helyett." +msgid "Printer Agent" +msgstr "Nyomtatóügynök" + msgid "Select the network agent implementation for printer communication." msgstr "Válaszd ki a nyomtató kommunikációjához használt hálózati ügynök implementációját." @@ -13790,6 +13850,10 @@ msgstr "Igazított vonal" msgid "Concentric" msgstr "Koncentrikus" +# AI Translated +msgid "Spiral Inset" +msgstr "Spirális behúzás" + msgid "Hilbert Curve" msgstr "Hilbert-görbe" @@ -13881,13 +13945,13 @@ msgstr "Felső felület kitöltési sorrendje" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Az az irány, amelyben a felső felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n" -"A Kifelé a felület közepén kezd, így a felesleges anyag a szélek felé tolódik, ahol a legkevésbé látszik. A Befelé a szélén kezd, és a középen lévő szűk ívekkel fejeződik be.\n" -"Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat." +"Az az irány, amelyben a felső felületek kitöltése történik középpontból induló mintázat esetén (Koncentrikus, Spirális behúzás, Archimédeszi vonalak, Nyolcágú spirál).\n" +"A Kifelé a felület közepén indul, így a felesleges anyag a szélek felé tolódik, ahol a legkevésbé látszik. A Befelé a szélen indul, és a középen lévő szűk ívekkel ér véget.\n" +"Az Alapértelmezett a legrövidebb út szerinti sorrendet használja, amely bármelyik irányba haladhat." # AI Translated msgid "Bottom surface fill order" @@ -13895,13 +13959,13 @@ msgstr "Alsó felület kitöltési sorrendje" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Az az irány, amelyben az alsó felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n" -"A Befelé minden felületet a szélesebb külső ívekkel kezd, ami javítja az első réteg tapadását azokon az asztalokon, ahol a középen lévő szűk ívek nem tapadnak meg jól. A Kifelé a közepén kezd, a felesleges anyagot a szélek felé tolva.\n" -"Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat." +"Az az irány, amelyben az alsó felületek kitöltése történik középpontból induló mintázat esetén (Koncentrikus, Spirális behúzás, Archimédeszi vonalak, Nyolcágú spirál).\n" +"A Befelé minden felületet a szélesebb külső ívekkel kezd, ami javítja a kezdőréteg tapadását azokon az asztalokon, amelyeken a középen lévő szűk ívek esetleg nem tapadnak meg. A Kifelé a közepén indul, és a felesleges anyagot a szélek felé tolja.\n" +"Az Alapértelmezett a legrövidebb út szerinti sorrendet használja, amely bármelyik irányba haladhat." # AI Translated msgid "Internal solid infill pattern" @@ -14005,6 +14069,14 @@ msgstr "Óramutató járásával ellentétes" msgid "Clockwise" msgstr "Óramutató járásával megegyező" +# AI Translated +msgid "Distance to rod" +msgstr "Távolság a rúdtól" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "A fúvóka hegyének vízszintes távolsága a rúd távolabbi élétől. Ütközés elkerülésére szolgál tárgyankénti nyomtatás esetén." + msgid "Height to rod" msgstr "Magasság a rúdig" @@ -16183,6 +16255,20 @@ msgstr "Túlnyúló falak felismerése" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Felismeri a túlnyúlás százalékos arányát a vonalszélességhez viszonyítva, és más sebességet használ. A 100%%-os túlnyúlás esetén az áthidaláshoz beállított sebességet használja." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Alátámasztatlan falak nyomtatása utoljára" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"A teljesen a levegőben lévő falhurkok csak akkor kerülnek nyomtatásra, amikor már van, ami megtartsa őket:\n" +"a szigetük többi fala után kerülnek extrudálásra, a legbelsővel kezdve, függetlenül a falak sorrendjétől.\n" +"Az a hurok, amelyet csak az adott réteg áthidalásai tudnak rögzíteni, megvárja, amíg ezek az áthidalások kinyomtatásra kerülnek, míg egy alátámasztott fal mellett futó hurok megtartja a helyét a kitöltés előtt, amelynek rögzítésként szüksége van rá." + # AI Translated msgid "Outer walls" msgstr "Külső falak" @@ -16623,6 +16709,39 @@ msgstr "Törlés hurkokon" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "A varrat láthatóságának csökkentéséhez zárt hurok extrudálásnál egy kis befelé irányuló mozgás történik, mielőtt az extruder elhagyná a hurkot." +# AI Translated +msgid "Wipe inward" +msgstr "Törlés befelé" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Csak a külső falakra vonatkozik, beleértve a furatok kontúrjait is. Törlés közben a forró fúvókát a már kinyomtatott belső falak felé mozgatja, hogy csökkentse a frissen nyomtatott műanyag újramelegedését és a varratnyomokat.\n" +"\n" +"Különösen hasznos 0,1 mm alatti rétegmagasságnál, ahol a törlésnyomok jobban látszanak.\n" +"\n" +"A szokásos törlést használja, ha nincs még kinyomtatott szomszédos belső fal (egyfalú területek vagy Külső/Belső falsorrend), illetve ha nem található alátámasztott befelé vezető útvonal, például szűk sarkoknál vagy varrathézagoknál." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Törlés befelé távolsága" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Az a távolság, amennyivel a törlési útvonal eltolódik a külső kerülettől, milliméterben vagy a külső fal tényleges extrudálási szélességének százalékában megadva.\n" +"\n" +"Például az 50% a külső fal szélességének felével tolja el az útvonalat. A tényleges eltolást korlátozza a külső fal tényleges szélessége és a szomszédos falig rendelkezésre álló hely is, ezért a 100% feletti értékeknek vagy az ezzel egyenértékű abszolút távolságnak nincs további hatása. Az eltolás kikapcsolásához állítsd 0-ra." + msgid "Wipe before external loop" msgstr "Törlés a külső hurok előtt" @@ -16888,8 +17007,9 @@ msgstr "Felveszi az új szerszámot anélkül, hogy megvárná a nyomtatási hő msgid "No sparse layers (beta)" msgstr "Nincsenek ritka rétegek (béta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Ha engedélyezed, nem készül törlőtorony azokon a rétegeken, ahol nincs szerszámváltás. A szerszámváltást tartalmazó rétegeknél az extruder az aktuális magasság alá süllyed a törlőtorony nyomtatásához. Ügyelj arra, hogy ez ne okozzon ütközést a nyomtatás során." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Ha be van kapcsolva, a törlőtorony nem kerül nyomtatásra azokon a rétegeken, ahol nincs eszközváltás. Az eszközváltást tartalmazó rétegeken az extruder lefelé mozdul, hogy kinyomtassa a törlőtornyot, így a torony a modell alá kerül, és a szerszámfejnek le kell nyúlnia hozzá. Azok az elrendezések, ahol ez ütközne egy már kinyomtatott tárggyal, elutasításra kerülnek. Nincs hatása sima Timelapse vagy fúvókalerakódás-érzékelés esetén, mert ezekhez minden rétegen kell torony." msgid "Prime all printing extruders" msgstr "Az összes nyomtató extruder előkészítése" @@ -16915,6 +17035,34 @@ msgstr "" msgid "Cyclic" msgstr "Ciklikus" +# AI Translated +msgid "Cyclic order" +msgstr "Ciklikus sorrend" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"A ciklikus eszközváltási sorrend által használt egyéni filamentsorrend, vesszővel elválasztott filamentszámokként (pl. \"3,2,1,4\").\n" +"Minden réteg ezt a sorrendet követve nyomtatja a filamentjeit; a fel nem sorolt filamentek utoljára kerülnek nyomtatásra, növekvő sorrendben.\n" +"Hagyd üresen, ha a filamenteket növekvő sorrendben szeretnéd végigjárni." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Ciklikus sorrend alkalmazása a kezdőrétegre" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"A ciklikus eszközváltási sorrendet a kezdőrétegre is alkalmazza.\n" +"Alapértelmezés szerint ki van kapcsolva, mert a kezdőréteg helyette a legjobb asztalra tapadás érdekében kerül sorba rendezésre: azok a filamentek, amelyek kicsi, törékeny kezdőréteg-elemeket nyomtatnak, utoljára kerülnek sorra, így a következő eszközváltások és mozgások kisebb eséllyel szakítják le ezeket a gyengén rögzített részeket. Ez a kezdőréteg-sorrend figyelembe veszi a kezdőréteghez beállított egyéni filamentsorrendet is, ha van ilyen. A ciklikus sorrend előnye (a további eszközváltások több időt adnak minden rétegnek a hűlésre) nem érvényes a kezdőrétegre, amely a tapadás érdekében lassan és forrón készül.\n" +"Csak akkor kapcsold be, ha pontosan ugyanarra az eszközsorrendre van szükséged minden rétegen, beleértve az elsőt is, ezen tapadásoptimalizálás rovására." + msgid "Slice gap closing radius" msgstr "Szeletelési hézag lezárási sugara" @@ -16924,9 +17072,6 @@ msgstr "A háromszögháló szeletelésekor kitölti a hézagzárási sugár ké msgid "Slicing Mode" msgstr "Szeletelési mód" -msgid "Other" -msgstr "Egyéb" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Használd a \"Páros-páratlan\" opciót a 3DLabPrint repülőgépmodellekhez. Használd a \"Hézagok lezárása\" lehetőséget a modell összes házagának lezárásához." @@ -17924,6 +18069,14 @@ msgstr "Nincs ellenőrzés" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Ne futtass érvényességi ellenőrzéseket, például G-kód útvonalütközés-ellenőrzést." +# AI Translated +msgid "Strict mode" +msgstr "Szigorú mód" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Nem nulla kilépési kóddal lép ki, ha a szeletelés olyan nem kritikus figyelmeztetést ad, amely egyébként csak naplózásra kerülne, például ha egy modellhez támasz kellene, miközben a támasz ki van kapcsolva. Használd CI-ben vagy szkriptelt folyamatokban, amelyek soha nem adhatnak ki észrevétlenül hibás szeletelést. Minden ilyen figyelmeztetés stabil osztállyal szerepel a result.json `warnings` tömbjében is, amely csak Linuxon készül el. Nem használható a --no-check kapcsolóval együtt, amely kihagyja a támaszellenőrzést." + msgid "Normative check" msgstr "Normatív ellenőrzés" @@ -17936,11 +18089,28 @@ msgstr "Kimeneti modell információ" msgid "This outputs the model’s information." msgstr "Kimeneti modell információ." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Háló vizsgálata (JSON a stdout-ra)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Kiír a stdout-ra egy JSON összegzést minden betöltött tárgyról, majd kilép: a befoglaló dobozait és a konvex burok azon lapjait, amelyekre lefektethető, ezek normálisaival, területével és középpontjával együtt. Ezek közül a lapok közül választanak a --ground-* kapcsolók. Az --info géppel olvasható alternatívája." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Festés vizsgálata (JSON a stdout-ra)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Kiír egy strukturált JSON összegzést a betöltött modellen már tárolt minden festett rétegről (támaszok, varrat, MMU-szín, barázdált felület) — állapotonkénti lapszám, felület és a hálóhoz viszonyított befoglaló doboz —, majd kilép. A festőeszközök felületen történő megnyitásának géppel olvasható alternatívája." + msgid "Export Settings" msgstr "Beállítások exportálása" -msgid "This exports settings to a file." -msgstr "Beállítások exportálása egy fájlba." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Ez fájlba exportálja a beállításokat. A - használatával a stdout-ra írja őket." msgid "Send progress to pipe" msgstr "Folyamat elküldése" @@ -17996,6 +18166,30 @@ msgstr "Forgatás Y körül" msgid "Rotation angle around the Y axis in degrees." msgstr "Az Y tengely körüli forgatási szög fokban." +# AI Translated +msgid "Ground largest face" +msgstr "Fektetés a legnagyobb lapra" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Minden tárgyat a konvex burkának legnagyobb lapjára fektet, és ráejti az asztalra. Az egyforma méretű lapok közül a már lefelé néző marad. Azok a tárgyak, amelyeknek nincs elég nagy lapjuk a megtámaszkodáshoz, változatlanok maradnak. Az átalakítások a parancssori sorrendben futnak, így az ezen kapcsoló előtt megadott forgatások érvényesülnek. Az --orient 1 az összes átalakítás után fut, és felülírja a tájolást." + +# AI Translated +msgid "Ground face by normal" +msgstr "Fektetés lapra normális szerint" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Minden tárgyat a konvex burok azon lapjára fektet, amelynek kifelé mutató normálisa a legközelebb van az NX,NY,NZ irányhoz, és ráejti az asztalra. Az irány a tárgy koordinátáiban értendő, amelyek tartalmazzák az ezen kapcsoló előtt megadott forgatásokat, és megegyeznek az asztal tengelyeivel, hacsak a bemeneti fájl el nem forgatja a tárgyat. Például az 1,0,0 a +X oldalára állítja a tárgyat. Az --orient 1 az összes átalakítás után fut, és felülírja a tájolást." + +# AI Translated +msgid "Ground face at point" +msgstr "Fektetés pontban lévő lapra" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Minden tárgyat a konvex burok azon lapjára fektet, amely tartalmazza az X,Y,Z pontot, és ráejti az asztalra. A pont a tárgy koordinátáiban értendő, amelyek tartalmazzák az ezen kapcsoló előtt megadott forgatásokat; az --inspect-mesh ezekben adja meg a lapok középpontját. Azok a tárgyak, amelyeknek nincs ilyen lapjuk, változatlanok maradnak, és a futás hibával áll le, ha egyetlen tárgynak sincs ilyen lapja. Az --orient 1 az összes átalakítás után fut, és felülírja a tájolást." + msgid "Scale the model by a float factor." msgstr "A modell méretezése egy lebegő tényezővel" @@ -21180,14 +21374,17 @@ msgstr "Ez a művelet nem vonható vissza. Folytatod?" msgid "Skipping objects." msgstr "Objektumok kihagyása." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Anyagarány" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Modellmagasság" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Arány" msgid "Select Filament" msgstr "Filament kiválasztása" @@ -21471,12 +21668,14 @@ msgid "Drying-Dehumidifying" msgstr "Szárítás – páramentesítés" # AI Translated -msgid " maximum drying temperature is " -msgstr " maximális szárítási hőmérséklete " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s maximális szárítási hőmérséklete %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " minimális szárítási hőmérséklete " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s minimális szárítási hőmérséklete %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -21922,6 +22121,97 @@ msgstr "" "Kunkorodás elkerülése\n" "Tudtad, hogy a kunkorodásra hajlamos anyagok (például ABS) nyomtatásakor az asztal hőmérsékletének növelése csökkentheti a kunkorodás valószínűségét?" +#~ msgid "Other" +#~ msgstr "Egyéb" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Bal: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Jobb: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "A maximális hőmérséklet nem haladhatja meg ezt: " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "A minimális hőmérséklet nem lehet kevesebb ennél: " + +#~ msgid "up to" +#~ msgstr "legfeljebb" + +#~ msgid "above" +#~ msgstr "felett" + +#~ msgid "from" +#~ msgstr "ettől" + +#~ msgid "Configuration package: " +#~ msgstr "Konfigurációs csomag: " + +#~ msgid " updated to " +#~ msgstr " frissítve erre: " + +#~ msgid "Grouping error: " +#~ msgstr "Csoportosítási hiba: " + +#~ msgid " can not be placed in the " +#~ msgstr " nem helyezhető ide: " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " maximális szárítási hőmérséklete " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " minimális szárítási hőmérséklete " + +# AI Translated +#~ msgid "needs" +#~ msgstr "ehhez kell" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "nincs engedélyezve" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "az anyag nincs közzétéve" + +#~ msgid "Select the language" +#~ msgstr "Válaszd ki a nyelvet" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Bővítmény kiválasztása" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Az az irány, amelyben a felső felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n" +#~ "A Kifelé a felület közepén kezd, így a felesleges anyag a szélek felé tolódik, ahol a legkevésbé látszik. A Befelé a szélén kezd, és a középen lévő szűk ívekkel fejeződik be.\n" +#~ "Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Az az irány, amelyben az alsó felületek kitöltése történik középpont alapú mintázat (Koncentrikus, Archimédeszi vonalak, Nyolcágú spirál) használatakor.\n" +#~ "A Befelé minden felületet a szélesebb külső ívekkel kezd, ami javítja az első réteg tapadását azokon az asztalokon, ahol a középen lévő szűk ívek nem tapadnak meg jól. A Kifelé a közepén kezd, a felesleges anyagot a szélek felé tolva.\n" +#~ "Az Alapértelmezett a legrövidebb útvonal szerinti sorrendet használja, amely bármelyik irányba haladhat." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Ha engedélyezed, nem készül törlőtorony azokon a rétegeken, ahol nincs szerszámváltás. A szerszámváltást tartalmazó rétegeknél az extruder az aktuális magasság alá süllyed a törlőtorony nyomtatásához. Ügyelj arra, hogy ez ne okozzon ütközést a nyomtatás során." + +#~ msgid "This exports settings to a file." +#~ msgstr "Beállítások exportálása egy fájlba." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "A natív Wayland élőképhez a GStreamer GTK videonyelő szükséges. Telepítsd a gtksink beépülő modult a GStreamerhez, majd indítsd újra az OrcaSlicert." diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index bc9a0980f2..a28bfe7c7e 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -2466,13 +2466,6 @@ msgstr "È disponibile un aggiornamento. Apri la finestra di dialogo del bundle msgid "%s has been removed." msgstr "%s è stato rimosso." - -msgid "Select the language" -msgstr "Seleziona la lingua" - -msgid "Language" -msgstr "Lingua" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3713,11 +3706,15 @@ msgstr "Ritira il filamento attuale sul Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Cambia traccia sul Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "La temperatura massima non può superare " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "La temperatura massima non può superare %d" -msgid "The minmum temperature should not be less than " -msgstr "La temperatura minima non deve essere inferiore a " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "La temperatura minima non deve essere inferiore a %d" # AI Translated msgid "Type to filter..." @@ -4603,6 +4600,15 @@ msgstr "" "Copia del G-code temporaneo sul G-code di uscita non riuscita. Forse la scheda SD è protetta da scrittura?\n" "Messaggio di errore: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Copia del G-code temporaneo nel G-code di output non riuscita.\n" +"Messaggio di errore: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Copia del G-code temporaneo nel G-code di uscita non riuscita. Potrebbe esserci un problema nel dispositivo di destinazione. Prova ad esportare di nuovo o usa un dispositivo diverso. Il file G-code corrotto è su %1%.tmp." @@ -5338,10 +5344,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Il valore %s è fuori intervallo. L'intervallo valido è da %d a %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"È %s%% o %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "È %s%% o %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5367,22 +5374,18 @@ msgstr "Formato non valido. Formato vettoriale previsto: \"%1%\"" msgid "System agents" msgstr "Agenti di sistema" -# AI Translated -msgid "No plugin selected" -msgstr "Nessun plugin selezionato" - # AI Translated msgid "Add plugin" msgstr "Aggiungi plugin" -# AI Translated -msgid "Select plugin" -msgstr "Seleziona plugin" - # AI Translated msgid "Remove plugin" msgstr "Rimuovi plugin" +# AI Translated +msgid "No plugin selected" +msgstr "Nessun plugin selezionato" + # AI Translated msgid "Configure" msgstr "Configura" @@ -5638,14 +5641,20 @@ msgstr "Imposta al valore ottimale" msgid "Regroup filament" msgstr "Raggruppa nuovamente i filamenti" -msgid "up to" -msgstr "fino a" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "fino a %1% mm" -msgid "above" -msgstr "sopra" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "sopra %1% mm" -msgid "from" -msgstr "da" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "da %1% a %2% mm" msgid "Usage" msgstr "Utilizzo" @@ -6007,7 +6016,7 @@ msgstr "Volume:" msgid "Size:" msgstr "Dimensione:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Sono stati trovati conflitti di percorsi nel G-code sullo strato %d, Z = %.2lfmm. Si prega di separare gli oggetti in conflitto (%s <-> %s)." @@ -6321,11 +6330,13 @@ msgstr "Salva progetto con nome" msgid "Save current project as" msgstr "Salva progetto corrente con nome" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Pubblica 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Esporta un file 3MF con le impostazioni selezionate incorporate" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importa 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7602,6 +7613,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferiore" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Questa impostazione non specifica un tipo di funzionalità del plugin." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Questa impostazione specifica un tipo di funzionalità del plugin non riconosciuto: " + # AI Translated msgid "Plugin Selection" msgstr "Selezione plugin" @@ -8163,11 +8182,13 @@ msgstr "Si prega di confermare che i G-code all'interno di questi profili sono s msgid "Customized Preset" msgstr "Profilo personalizzato" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Alcune impostazioni pubblicate non sono state applicate:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Alcuni slot filamento sono stati modificati:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Il nome dei componenti all'interno del file STEP non è in formato UTF-8!" @@ -8576,13 +8597,17 @@ msgstr "Salva file elaborato con nome:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Il file %s è stato inviato alla memoria della stampante e può essere visualizzato da lì." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Pubblica il file 3MF come:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Esportazione del file 3MF pubblicato non riuscita.\n" +"Verifica se la cartella esiste online o se altri programmi hanno il file aperto." msgid "Publish" msgstr "Pubblica" @@ -8801,7 +8826,6 @@ msgstr "Vuoi continuare?" msgid "Language selection" msgstr "Selezione lingua" - msgid "Asia-Pacific" msgstr "Asia-Pacifico" @@ -8907,6 +8931,9 @@ msgstr "Percorso istanza attuale: " msgid "General" msgstr "Generale" +msgid "Language" +msgstr "Lingua" + msgid "Metric" msgstr "Metrico" @@ -9368,9 +9395,6 @@ msgstr "Quando si scorre il cursore degli strati nell'anteprima elaborata, gli s msgid "Dimmed layer brightness" msgstr "Luminosità degli strati attenuati" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9784,63 +9808,80 @@ msgstr "Caricamento dati" msgid "Jump to webpage" msgstr "Vai alla pagina web" +# AI Translated msgid "Material" -msgstr "" +msgstr "Materiale" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filamento misto" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Alcuni filamenti misti dipendono da filamenti che non verranno pubblicati:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filamento %d (misto)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% richiede %2%, che non è abilitato." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% richiede %2%, il cui materiale non verrà pubblicato." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Per pubblicare un filamento misto, abilita ogni filamento che utilizza e scegli Pubblicazione completa oppure soddisfa il suo requisito Tipo." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Pubblica comunque" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Pubblica 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Seleziona quali impostazioni pubblicare nel file 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki di Pubblica 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Guida video di Pubblica 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filamento misto - pubblicato per intero quando sopra è selezionato \"Abilita\"" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Pubblica questo filamento misto e abilita + pubblica per intero i suoi filamenti componenti" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Pubblica questo slot filamento nel file 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Pubblicazione completa" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Incorpora l'intero filamento di questo slot nel file 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtra non selezionati" #, c-format, boost-format msgid "Save %s as" @@ -9859,6 +9900,10 @@ msgstr "Copia in questo profilo tutti i valori ereditati dal profilo padre e rim msgid "Detach from parent" msgstr "Scollega dal genitore" +# AI Translated +msgid "Save without parent" +msgstr "Salva senza genitore" + # AI Translated msgid "Unique preset" msgstr "Profilo unico" @@ -10563,9 +10608,17 @@ msgstr "È necessaria una torre di spurgo per il rilevamento degli ammassi. Potr msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "L'abilitazione sia dell'altezza Z precisa che della torre di spurgo potrebbe causare errori di slicing. Vuoi comunque abilitare l'altezza Z precisa?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Il timelapse fluido richiede una torre di spurgo su ogni strato, il che non è compatibile con \"Nessuno strato sparso\". \"Nessuno strato sparso\" è stato disattivato." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "È necessaria una torre di spurgo per una modalità timelapse fluida. Potrebbero esserci dei difetti sul modello senza una torre di spurgo. Vuoi abilitare la torre di spurgo?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Nessuno strato sparso\" non è compatibile con il timelapse fluido, che richiede una torre di spurgo su ogni strato. Il timelapse è passato alla modalità tradizionale." + msgid "Still print by object?" msgstr "Stampare ancora per oggetto?" @@ -10939,9 +10992,6 @@ msgstr "Profili di processo compatibili" msgid "Printable space" msgstr "Spazio di stampa" -msgid "Printer Agent" -msgstr "Agente stampante" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Selezionare l'implementazione dell'agente di rete per la comunicazione con la stampante. Gli agenti disponibili vengono registrati all'avvio." @@ -11350,14 +11400,6 @@ msgstr "Numero di estrusori" msgid "Capabilities" msgstr "Caratteristiche" -# AI Translated -msgid "Left: " -msgstr "Sinistra: " - -# AI Translated -msgid "Right: " -msgstr "Destra: " - msgid "Show all presets (including incompatible)" msgstr "Mostra tutti i profili (compresi quelli non compatibili)" @@ -12204,15 +12246,22 @@ msgstr "Riparazione annullata" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Copia del file %1% su %2% non riuscita: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Download dei nuovi profili produttore: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Pacchetto di configurazione: %1% aggiornato a %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Download dei profili produttore non riuscito: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Controllare le modifiche non salvate prima di aggiornare la configurazione." -msgid "Configuration package: " -msgstr "Pacchetto di configurazione: " - -msgid " updated to " -msgstr " aggiornato a " - msgid "Open G-code file:" msgstr "Apri un file G-code:" @@ -12272,11 +12321,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "La compensazione della risonanza è supportata solo da Klipper, RepRapFirmware e Marlin 2" -msgid "Grouping error: " -msgstr "Errore di raggruppamento: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Errore di raggruppamento: %1% non può essere collocato nell'ugello sinistro" -msgid " can not be placed in the " -msgstr " non può essere posizionato nel " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Errore di raggruppamento: %1% non può essere collocato nell'ugello destro" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12390,6 +12443,10 @@ msgstr "%1% è troppo vicino ad altri oggetti e potrebbe causare collisioni." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% è troppo alto e si verificheranno collisioni." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "La posizione relativa del modello e della torre di spurgo non soddisfa i requisiti della funzione \"Nessuno strato sparso\". Modifica le loro posizioni relative, riduci l'altezza del modello oppure disattiva \"Nessuno strato sparso\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " è troppo vicino all'area di esclusione e potrebbero verificarsi collisioni durante la stampa." @@ -12749,6 +12806,9 @@ msgstr "Usa 3MF invece di G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Abilita questa opzione se la stampante accetta un file 3MF come processo di stampa. Quando è abilitata, Orca Slicer invia il file elaborato come .gcode.3mf, invece di un semplice file .gcode." +msgid "Printer Agent" +msgstr "Agente stampante" + msgid "Select the network agent implementation for printer communication." msgstr "Selezionare l'implementazione dell'agente di rete per la comunicazione con la stampante." @@ -13810,6 +13870,10 @@ msgstr "Rettilineo allineato" msgid "Concentric" msgstr "Concentrico" +# AI Translated +msgid "Spiral Inset" +msgstr "Spirale interna" + msgid "Hilbert Curve" msgstr "Curva di Hilbert" @@ -13901,13 +13965,13 @@ msgstr "Ordine di riempimento della superficie superiore" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direzione in cui vengono riempite le superfici superiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n" -"Verso l'esterno inizia dal centro della superficie, in modo che il materiale in eccesso venga spinto verso il bordo dove è meno visibile. Verso l'interno inizia dal bordo e termina con le curve strette al centro.\n" -"L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni." +"Direzione in cui vengono riempite le superfici superiori quando si usa un motivo che parte dal centro (Concentrico, Spirale interna, Corde di Archimede, Spirale a ottogramma).\n" +"Verso l'esterno parte dal centro della superficie, così il materiale in eccesso viene spinto verso il bordo, dove è meno visibile. Verso l'interno parte dal bordo e termina con le curve strette al centro.\n" +"Predefinito usa l'ordinamento del percorso più breve, che può procedere in entrambe le direzioni." # AI Translated msgid "Bottom surface fill order" @@ -13915,13 +13979,13 @@ msgstr "Ordine di riempimento della superficie inferiore" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direzione in cui vengono riempite le superfici inferiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n" -"Verso l'interno inizia ogni superficie con le curve esterne più ampie, il che migliora l'adesione del primo strato sui piatti di stampa dove le curve strette al centro potrebbero non aderire. Verso l'esterno inizia dal centro, spingendo il materiale in eccesso verso il bordo.\n" -"L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni." +"Direzione in cui vengono riempite le superfici inferiori quando si usa un motivo che parte dal centro (Concentrico, Spirale interna, Corde di Archimede, Spirale a ottogramma).\n" +"Verso l'interno inizia ogni superficie con le curve esterne più ampie, migliorando l'adesione del primo strato sui piatti su cui le curve strette al centro potrebbero non aderire. Verso l'esterno parte dal centro e spinge il materiale in eccesso verso il bordo.\n" +"Predefinito usa l'ordinamento del percorso più breve, che può procedere in entrambe le direzioni." msgid "Internal solid infill pattern" msgstr "Motivo riempimento solido interno" @@ -14024,6 +14088,14 @@ msgstr "Senso antiorario" msgid "Clockwise" msgstr "Senso orario" +# AI Translated +msgid "Distance to rod" +msgstr "Distanza dall'asta" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Distanza orizzontale tra la punta dell'ugello e il bordo più lontano dell'asta. Usata per evitare collisioni nella stampa per oggetto." + msgid "Height to rod" msgstr "Altezza asta" @@ -16202,6 +16274,20 @@ msgstr "Rileva pareti sporgenti" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Rileva la percentuale di sporgenza rispetto alla larghezza della parete e utilizza un velocità di stampa differente. Per una sporgenza del 100%%, viene utilizzata la velocità dei ponti." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Stampa per ultime le pareti non supportate" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"I perimetri di stampa che si trovano interamente in aria vengono stampati solo quando qualcosa può sostenerli:\n" +"sono estrusi dopo le altre pareti della loro isola, partendo dalla più interna, qualunque sia l'ordine delle pareti.\n" +"Un perimetro che solo i ponti di questo strato possono ancorare attende che tali ponti siano stampati, mentre un perimetro che corre accanto a una parete supportata mantiene il suo posto prima del riempimento, che lo richiede come ancoraggio." + # AI Translated msgid "Outer walls" msgstr "Pareti esterne" @@ -16646,6 +16732,39 @@ msgstr "Spurgo sui perimetri di stampa" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Per ridurre al minimo la visibilità della cucitura in un'estrusione ad anello chiuso, viene eseguito un piccolo movimento verso l'interno prima che l'estrusore lasci il perimetro." +# AI Translated +msgid "Wipe inward" +msgstr "Spurgo verso l'interno" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Si applica solo alle pareti esterne, inclusi i contorni dei fori. Durante lo spurgo sposta l'ugello caldo verso le pareti interne già stampate, per ridurre il riscaldamento della plastica appena depositata e i segni di cucitura.\n" +"\n" +"Particolarmente utile con altezze strato inferiori a 0,1 mm, dove i segni di spurgo sono più visibili.\n" +"\n" +"Usa lo spurgo normale se nessuna parete interna adiacente è già stata stampata (zone a parete singola oppure ordine delle pareti Esterna/Interna) o se non si trova un percorso verso l'interno che sia supportato, ad esempio in angoli stretti o in corrispondenza di interruzioni della cucitura." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Distanza di spurgo verso l'interno" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Distanza di cui il percorso di spurgo viene spostato rispetto al perimetro esterno, espressa in millimetri o in percentuale della larghezza di estrusione effettiva della parete esterna.\n" +"\n" +"Ad esempio, 50% sposta il percorso di metà della larghezza della parete esterna. Lo spostamento effettivo è limitato sia dalla larghezza effettiva della parete esterna sia dallo spazio disponibile fino alla parete adiacente, perciò valori superiori a 100% o una distanza assoluta equivalente non hanno alcun effetto aggiuntivo. Imposta 0 per disattivare lo spostamento." + msgid "Wipe before external loop" msgstr "Spurgo prima del perimetro esterno" @@ -16912,8 +17031,9 @@ msgstr "Preleva la nuova testina senza attendere che raggiunga la temperatura di msgid "No sparse layers (beta)" msgstr "Nessuno strato sparso (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Se abilitata, la torre di spurgo non verrà stampata sugli strati in cui non viene effettuato alcun cambio di testina. Sui strati con un cambio di testina, l'estrusore si sposterà verso il basso per stampare la torre di spurgo. L'utente dovrà accertarsi che non avvengano collisioni con la stampa." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Se abilitata, la torre di spurgo non viene stampata sugli strati senza cambi testina. Sugli strati con un cambio testina l'estrusore scende per stampare la torre di spurgo, perciò la torre finisce sotto il modello e la testa di stampa deve abbassarsi fino ad essa. Le disposizioni in cui ciò comporterebbe una collisione con un oggetto già stampato vengono rifiutate. Non ha effetto con il timelapse fluido o con il rilevamento degli ammassi sull'ugello, che richiedono una torre su ogni strato." msgid "Prime all printing extruders" msgstr "Prepara tutti gli estrusori di stampa" @@ -16939,6 +17059,34 @@ msgstr "" msgid "Cyclic" msgstr "Ciclico" +# AI Translated +msgid "Cyclic order" +msgstr "Ordine ciclico" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Sequenza di filamenti personalizzata usata dall'ordinamento ciclico dei cambi testina, come numeri di filamento separati da virgole (ad es. \"3,2,1,4\").\n" +"Ogni strato stampa i suoi filamenti seguendo questa sequenza; i filamenti non elencati vengono stampati per ultimi, in ordine crescente.\n" +"Lascia vuoto per scorrere i filamenti in ordine crescente." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Applica l'ordine ciclico al primo strato" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Applica l'ordine ciclico dei cambi testina anche al primo strato.\n" +"Per impostazione predefinita è disattivato, perché il primo strato viene invece ordinato per la migliore adesione al piatto: i filamenti che stampano dettagli piccoli e fragili del primo strato vengono stampati per ultimi, così i cambi testina e gli spostamenti successivi hanno meno probabilità di staccare quelle parti ancorate debolmente. Questo ordine del primo strato rispetta anche una sequenza di filamenti personalizzata per il primo strato, quando ne è impostata una. Il vantaggio dell'ordine ciclico (i cambi testina aggiuntivi danno a ogni strato più tempo per raffreddarsi) non si applica al primo strato, che viene stampato lentamente e caldo per l'adesione.\n" +"Abilita questa opzione solo se ti serve esattamente la stessa sequenza di testine su ogni strato, incluso il primo, a scapito di quell'ottimizzazione dell'adesione." + msgid "Slice gap closing radius" msgstr "Raggio di chiusura spazi vuoti" @@ -16948,9 +17096,6 @@ msgstr "Le fessure più piccole di 2 volte il raggio di chiusura degli spazi vuo msgid "Slicing Mode" msgstr "Modalità elaborazione" -msgid "Other" -msgstr "Altro" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Usa \"Pari-dispari\" per modelli di aeroplano 3DLabPrint. Utilizza \"Chiudi fori\" per chiudere tutti i fori del modello." @@ -17947,6 +18092,14 @@ msgstr "Nessun controllo" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Non eseguire alcun controllo di validità, come il controllo dei conflitti di percorso del G-code." +# AI Translated +msgid "Strict mode" +msgstr "Modalità rigorosa" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Termina con un codice di uscita diverso da zero quando l'elaborazione genera un avviso non critico che altrimenti verrebbe solo registrato, ad esempio un modello che richiede supporti mentre i supporti sono disattivati. Usala in CI o in pipeline automatizzate che non devono mai consegnare un'elaborazione sottilmente difettosa. Ciascuno di questi avvisi è inoltre elencato con una classe stabile nell'array `warnings` di result.json, che viene scritto solo su Linux. Non può essere combinata con --no-check, che salta il controllo dei supporti." + msgid "Normative check" msgstr "Controllo normativo" @@ -17959,11 +18112,28 @@ msgstr "Informazioni modello di output" msgid "This outputs the model’s information." msgstr "Fornisce le informazioni del modello." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Ispeziona mesh (JSON su stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Stampa su stdout un riepilogo JSON di ogni oggetto caricato, poi esce: i suoi riquadri di delimitazione e le facce dell'inviluppo convesso su cui può appoggiarsi, con le relative normali, aree e centri. Sono queste le facce tra cui scelgono le opzioni --ground-*. Alternativa leggibile da una macchina a --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Ispeziona pittura (JSON su stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Stampa un riepilogo JSON strutturato di ogni livello dipinto (supporti, cucitura, colore MMU, superficie ruvida) già memorizzato nel modello caricato — numero di facce, area della superficie e riquadro di delimitazione locale alla mesh per ciascuno stato — poi esce. Alternativa leggibile da una macchina all'apertura degli strumenti di pittura nell'interfaccia." + msgid "Export Settings" msgstr "Esporta impostazioni" -msgid "This exports settings to a file." -msgstr "Esporta le impostazioni in un file." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Esporta le impostazioni in un file. Usa - per scriverle su stdout." msgid "Send progress to pipe" msgstr "Invia l'avanzamento al pipe" @@ -18019,6 +18189,30 @@ msgstr "Ruota attorno ad Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Angolo di rotazione attorno all'asse Y in gradi." +# AI Translated +msgid "Ground largest face" +msgstr "Appoggia sulla faccia più grande" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Appoggia ogni oggetto sulla faccia più grande del suo inviluppo convesso e lo fa cadere sul piatto. Tra facce di uguale dimensione viene mantenuta quella già rivolta verso il basso. Gli oggetti privi di una faccia abbastanza grande su cui appoggiarsi restano invariati. Le trasformazioni vengono applicate nell'ordine della riga di comando, perciò le rotazioni indicate prima di questa opzione sono rispettate. --orient 1 viene eseguito dopo tutte le trasformazioni e sostituisce l'orientamento." + +# AI Translated +msgid "Ground face by normal" +msgstr "Appoggia sulla faccia per normale" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Appoggia ogni oggetto sulla faccia dell'inviluppo convesso la cui normale esterna è più vicina alla direzione NX,NY,NZ e lo fa cadere sul piatto. La direzione è espressa nelle coordinate dell'oggetto, che includono le rotazioni indicate prima di questa opzione e coincidono con gli assi del piatto a meno che il file di input non ruoti l'oggetto. Ad esempio, 1,0,0 appoggia l'oggetto sul suo lato +X. --orient 1 viene eseguito dopo tutte le trasformazioni e sostituisce l'orientamento." + +# AI Translated +msgid "Ground face at point" +msgstr "Appoggia sulla faccia in un punto" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Appoggia ogni oggetto sulla faccia dell'inviluppo convesso che contiene il punto X,Y,Z e lo fa cadere sul piatto. Il punto è espresso nelle coordinate dell'oggetto, che includono le rotazioni indicate prima di questa opzione; --inspect-mesh riporta i centri delle facce in tali coordinate. Gli oggetti privi di una faccia simile restano invariati e l'esecuzione fallisce se nessun oggetto ne ha una. --orient 1 viene eseguito dopo tutte le trasformazioni e sostituisce l'orientamento." + msgid "Scale the model by a float factor." msgstr "Ridimensiona il modello in base a un fattore decimale." @@ -21204,14 +21398,17 @@ msgstr "Questa azione non può essere annullata. Continuare?" msgid "Skipping objects." msgstr "Salto degli oggetti." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Proporzione materiale" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Altezza modello" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Proporzione" msgid "Select Filament" msgstr "Seleziona filamento" @@ -21495,12 +21692,14 @@ msgid "Drying-Dehumidifying" msgstr "Essiccazione - Deumidificazione" # AI Translated -msgid " maximum drying temperature is " -msgstr " la temperatura massima di essiccazione è " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "La temperatura massima di essiccazione di %s è %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " la temperatura minima di essiccazione è " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "La temperatura minima di essiccazione di %s è %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -21946,6 +22145,97 @@ msgstr "" "Evita le deformazioni\n" "Sapevi che quando si stampano materiali soggetti a deformazioni come l'ABS, aumentare in modo appropriato la temperatura del piano riscaldato può ridurre la probabilità di deformazione?" +#~ msgid "Other" +#~ msgstr "Altro" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Sinistra: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Destra: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "La temperatura massima non può superare " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "La temperatura minima non deve essere inferiore a " + +#~ msgid "up to" +#~ msgstr "fino a" + +#~ msgid "above" +#~ msgstr "sopra" + +#~ msgid "from" +#~ msgstr "da" + +#~ msgid "Configuration package: " +#~ msgstr "Pacchetto di configurazione: " + +#~ msgid " updated to " +#~ msgstr " aggiornato a " + +#~ msgid "Grouping error: " +#~ msgstr "Errore di raggruppamento: " + +#~ msgid " can not be placed in the " +#~ msgstr " non può essere posizionato nel " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " la temperatura massima di essiccazione è " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " la temperatura minima di essiccazione è " + +# AI Translated +#~ msgid "needs" +#~ msgstr "richiede" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "non abilitato" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "materiale non pubblicato" + +#~ msgid "Select the language" +#~ msgstr "Seleziona la lingua" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Seleziona plugin" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direzione in cui vengono riempite le superfici superiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n" +#~ "Verso l'esterno inizia dal centro della superficie, in modo che il materiale in eccesso venga spinto verso il bordo dove è meno visibile. Verso l'interno inizia dal bordo e termina con le curve strette al centro.\n" +#~ "L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direzione in cui vengono riempite le superfici inferiori quando si utilizza un motivo basato sul centro (Concentrico, Corde di Archimede, Spirale a ottagramma).\n" +#~ "Verso l'interno inizia ogni superficie con le curve esterne più ampie, il che migliora l'adesione del primo strato sui piatti di stampa dove le curve strette al centro potrebbero non aderire. Verso l'esterno inizia dal centro, spingendo il materiale in eccesso verso il bordo.\n" +#~ "L'impostazione predefinita utilizza l'ordinamento a percorso più breve, che può procedere in entrambe le direzioni." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Se abilitata, la torre di spurgo non verrà stampata sugli strati in cui non viene effettuato alcun cambio di testina. Sui strati con un cambio di testina, l'estrusore si sposterà verso il basso per stampare la torre di spurgo. L'utente dovrà accertarsi che non avvengano collisioni con la stampa." + +#~ msgid "This exports settings to a file." +#~ msgstr "Esporta le impostazioni in un file." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "La funzione di visualizzazione in tempo reale nativa di Wayland richiede il ricevitore video GTK di GStreamer. Installare il modulo gtksink per GStreamer e riavviare OrcaSlicer." diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index ed9960bb8a..68691d6700 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -2473,13 +2473,6 @@ msgstr "アップデートが利用可能です。プリセットバンドルの msgid "%s has been removed." msgstr "%sを削除しました。" - -msgid "Select the language" -msgstr "言語を選択" - -msgid "Language" -msgstr "言語" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3727,11 +3720,15 @@ msgstr "Filament Track Switchで現在のフィラメントを引き戻す" msgid "Switch track at Filament Track Switch" msgstr "Filament Track Switchでトラックを切り替える" -msgid "The maximum temperature cannot exceed " -msgstr "最高温度は次の値を超えることはできません " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "最高温度は %d を超えることはできません" -msgid "The minmum temperature should not be less than " -msgstr "最低温度は次の値を下回ることはできません " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "最低温度は %d を下回ることはできません" # AI Translated msgid "Type to filter..." @@ -4610,6 +4607,15 @@ msgstr "" "一時的なGコードの出力Gコードへのコピーに失敗しました。 もしかしたらSDカードが書き込みロックされていませんか？\n" "エラーメッセージ：%1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"一時G-codeから出力G-codeへのコピーに失敗しました。\n" +"エラーメッセージ: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "一時Gコードの出力Gコードへのコピーに失敗しました。 ターゲットデバイスに問題がある可能性があります。もう一度エクスポートするか、別のデバイスを使用してみてください。 破損した出力Gコードは%1%.tmpにあります。" @@ -5352,10 +5358,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "値%sは範囲外です。有効な範囲は%dから%dです。" #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"%s%% か、それとも %s %sですか？" +msgid "Is it %s%% or %s %s?" +msgstr "%s%% か、それとも %s %sですか？" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5381,22 +5388,18 @@ msgstr "無効なフォーマット、%1%であるはずです。" msgid "System agents" msgstr "システムエージェント" -# AI Translated -msgid "No plugin selected" -msgstr "プラグインが選択されていません" - # AI Translated msgid "Add plugin" msgstr "プラグインを追加" -# AI Translated -msgid "Select plugin" -msgstr "プラグインを選択" - # AI Translated msgid "Remove plugin" msgstr "プラグインを削除" +# AI Translated +msgid "No plugin selected" +msgstr "プラグインが選択されていません" + # AI Translated msgid "Configure" msgstr "設定" @@ -5653,14 +5656,20 @@ msgstr "最適に設定" msgid "Regroup filament" msgstr "フィラメントを再グルーピング" -msgid "up to" -msgstr "最大" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "%1% mm まで" -msgid "above" -msgstr "以上" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "%1% mm 以上" -msgid "from" -msgstr "から" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "%1% mm から %2% mm まで" msgid "Usage" msgstr "使用量" @@ -6023,7 +6032,7 @@ msgstr "ボリューム" msgid "Size:" msgstr "サイズ:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "レイヤー%d、Z = %.2lfmmでG-codeパスの衝突が検出されました。衝突するオブジェクトをもっと離してください（%s <-> %s）。" @@ -6331,11 +6340,13 @@ msgstr "プロジェクトを名前を付けて保存" msgid "Save current project as" msgstr "プロジェクトを名前を付けて保存" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "3MFを公開" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "選択した設定を埋め込んだ3MFファイルをエクスポートします" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "3MF/STL/STEP/SVG/OBJ/AMFをインポート" @@ -7609,6 +7620,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "底面" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "この設定にはプラグイン機能タイプが指定されていません。" + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "この設定には認識できないプラグイン機能タイプが指定されています: " + # AI Translated msgid "Plugin Selection" msgstr "プラグインの選択" @@ -8178,11 +8197,13 @@ msgstr "これらのプリセット内のG-codeがマシンに損傷を与えな msgid "Customized Preset" msgstr "カスタマイズされたプリセット" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "一部の公開された設定を適用できませんでした:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "一部のフィラメントスロットが変更されました:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "ファイルのエンコーディング方式はUTF-8形式ではありません" @@ -8596,13 +8617,17 @@ msgstr "名前を付けて保存:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "%sを送信しました、プリンターにて確認できます" +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "3MFファイルを次の名前で公開:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"公開する3MFファイルのエクスポートに失敗しました。\n" +"フォルダーがオンラインで存在するか、他のプログラムがファイルを開いていないか確認してください。" msgid "Publish" msgstr "公開する" @@ -8820,7 +8845,6 @@ msgstr "続行しますか？" msgid "Language selection" msgstr "言語選択" - msgid "Asia-Pacific" msgstr "アジア太平洋地域" @@ -8925,6 +8949,9 @@ msgstr "現在のインスタンスのパス: " msgid "General" msgstr "一般" +msgid "Language" +msgstr "言語" + msgid "Metric" msgstr "メートル" @@ -9389,9 +9416,6 @@ msgstr "スライスプレビューで積層スライダーを操作する際、 msgid "Dimmed layer brightness" msgstr "暗くした積層の明るさ" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9807,63 +9831,80 @@ msgstr "データをアップロード中" msgid "Jump to webpage" msgstr "ウェブページに移動" +# AI Translated msgid "Material" -msgstr "" +msgstr "材料" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "混合フィラメント" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "一部の混合フィラメントは、公開されないフィラメントに依存しています:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "フィラメント %d (混合)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1%には%2%が必要ですが、有効化されていません。" -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1%には%2%が必要ですが、その材料は公開されません。" +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "混合フィラメントを公開するには、使用しているすべてのフィラメントを有効にし、完全公開を選ぶか、タイプの要件を満たしてください。" +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "それでも公開" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "3MFを公開..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "3MFファイルで公開する設定を選択してください" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "3MF公開のWiki" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "3MF公開のビデオガイド" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "混合フィラメント - 上の「有効化」を選択すると全体が公開されます" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "この混合フィラメントを公開し、その構成フィラメントを有効化＋完全公開します" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "このフィラメントスロットを3MFファイルで公開します" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "完全公開" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "このスロットのフィラメント全体を3MFファイルに埋め込みます" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "未選択を絞り込み" #, c-format, boost-format msgid "Save %s as" @@ -9882,6 +9923,10 @@ msgstr "親プリセットから継承したすべての値をこのプリセッ msgid "Detach from parent" msgstr "親から分離" +# AI Translated +msgid "Save without parent" +msgstr "親なしで保存" + # AI Translated msgid "Unique preset" msgstr "独立したプリセット" @@ -10588,9 +10633,17 @@ msgstr "クランピング検出にはプライムタワーが必要です。プ msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "正確なZ高さとプライムタワーの両方を有効にすると、スライスエラーが発生する可能性があります。それでも正確なZ高さを有効にしますか？" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "スムーズタイムラプスは全積層にプライムタワーが必要なため、「スパース層なし」とは併用できません。「スパース層なし」をオフにしました。" + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "スムーズタイムラプスビデオを作成するにはプライムタワーが必要です。プライムタワーを有効にしますか？" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "「スパース層なし」は、全積層にプライムタワーが必要なスムーズタイムラプスとは併用できません。タイムラプスを通常モードに切り替えました。" + msgid "Still print by object?" msgstr "それでもオブジェクト別に印刷しますか？" @@ -10957,9 +11010,6 @@ msgstr "互換性のあるプロセスプロファイル" msgid "Printable space" msgstr "造形可能領域" -msgid "Printer Agent" -msgstr "プリンターエージェント" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "プリンター通信用のネットワークエージェント実装を選択します。使用可能なエージェントは起動時に登録されます。" @@ -11372,14 +11422,6 @@ msgstr "エクストルーダー数" msgid "Capabilities" msgstr "能力" -# AI Translated -msgid "Left: " -msgstr "左: " - -# AI Translated -msgid "Right: " -msgstr "右: " - msgid "Show all presets (including incompatible)" msgstr "全てのプリセットを表示" @@ -12231,15 +12273,22 @@ msgstr "修復を取消しました" msgid "Copying of file %1% to %2% failed: %3%" msgstr "ファイル %1% を %2% へのコピーが失敗しました (%3%)" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "新しいベンダープロファイルをダウンロード中: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "設定パッケージ: %1% を %2% に更新しました" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "ベンダープロファイルのダウンロードに失敗しました: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "構成を更新する前に、未保存の変更をご確認ください" -msgid "Configuration package: " -msgstr "設定パッケージ: " - -msgid " updated to " -msgstr " を更新しました " - msgid "Open G-code file:" msgstr "G-codeファイルを開く" @@ -12303,11 +12352,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "インプットシェーピングはKlipper、RepRapFirmware、Marlin 2のみが対応しています。" -msgid "Grouping error: " -msgstr "グルーピングエラー: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "グルーピングエラー: %1% は左ノズルに配置できません" -msgid " can not be placed in the " -msgstr " に配置できません " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "グルーピングエラー: %1% は右ノズルに配置できません" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12421,6 +12474,10 @@ msgstr "%1% は他のオブジェクトと近すぎるため、衝突の可能 msgid "%1% is too tall, and collisions will be caused." msgstr "%1% は高すぎます、衝突の可能性があります。" +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "モデルとプライムタワーの相対位置が「スパース層なし」機能の要件を満たしていません。相対位置を調整するか、モデルの高さを下げるか、「スパース層なし」をオフにしてください。" + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "が除外領域に近すぎます。衝突の可能性があります。" @@ -12793,6 +12850,9 @@ msgstr "G-codeの代わりに3MFを使用" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "プリンターが印刷ジョブとして3MFファイルを受け付ける場合に有効にします。有効にすると、Orca Slicerはスライス済みファイルを通常の.gcodeファイルではなく.gcode.3mfとして送信します。" +msgid "Printer Agent" +msgstr "プリンターエージェント" + msgid "Select the network agent implementation for printer communication." msgstr "プリンター通信用のネットワークエージェント実装を選択します。" @@ -13902,6 +13962,10 @@ msgstr "整列直線" msgid "Concentric" msgstr "同心" +# AI Translated +msgid "Spiral Inset" +msgstr "スパイラルインセット" + msgid "Hilbert Curve" msgstr "ヒルベルト曲線" @@ -13995,13 +14059,13 @@ msgstr "上面の充填順序" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、上面を充填する方向です。\n" -"外向きは面の中心から始まるため、余分な材料が最も目立たない縁へ押し出されます。内向きは縁から始まり、中心の細かいカーブで終わります。\n" -"デフォルトは最短経路順で、どちらの方向にもなり得ます。" +"中心を起点とするパターン（同心、スパイラルインセット、アルキメデス螺旋、オクタグラムスパイラル）を使用する場合の、トップ面を充填する方向です。\n" +"外側は面の中心から始まるため、余分な材料は最も目立たない縁へ押し出されます。内側は縁から始まり、中心の細かいカーブで終わります。\n" +"デフォルトは最短経路順を使用し、どちらの方向にも進むことがあります。" # AI Translated msgid "Bottom surface fill order" @@ -14009,13 +14073,13 @@ msgstr "底面の充填順序" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、底面を充填する方向です。\n" -"内向きは各面を幅の広い外側のカーブから始めるため、中心の細かいカーブが定着しにくいベッドでも1層目の密着性が向上します。外向きは中心から始まり、余分な材料を縁へ押し出します。\n" -"デフォルトは最短経路順で、どちらの方向にもなり得ます。" +"中心を起点とするパターン（同心、スパイラルインセット、アルキメデス螺旋、オクタグラムスパイラル）を使用する場合の、底面を充填する方向です。\n" +"内側は各面を幅の広い外側のカーブから始めるため、中心の細かいカーブが定着しにくいベッドでも1層目の接着が改善します。外側は中心から始まり、余分な材料を縁へ押し出します。\n" +"デフォルトは最短経路順を使用し、どちらの方向にも進むことがあります。" msgid "Internal solid infill pattern" msgstr "内部ソリッドインフィルパターン" @@ -14124,6 +14188,14 @@ msgstr "反時計回り" msgid "Clockwise" msgstr "時計回り" +# AI Translated +msgid "Distance to rod" +msgstr "ロッドまでの距離" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "ノズル先端からロッドの遠い側の端までの水平距離です。オブジェクト順の造形で衝突を回避するために使用されます。" + msgid "Height to rod" msgstr "レールまでの高さ" @@ -16463,6 +16535,20 @@ msgstr "オーバーハングを検出" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "この設定により、線幅に対するオーバーハングの割合を検出し、異なる速度で造形します。100%%のオーバーハングの場合、ブリッジの速度が使用されます。" +# AI Translated +msgid "Print unsupported walls last" +msgstr "支えのない壁を最後に造形" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"完全に宙に浮いている壁面ループは、支えとなるものができてから造形されます。\n" +"壁の順序にかかわらず、同じアイランドの他の壁の後に、最も内側から順に押し出されます。\n" +"この積層のブリッジだけが固定できるループは、それらのブリッジが造形されるまで待ちます。一方、支えのある壁に沿って走るループは、それをアンカーとして必要とするインフィルの前という位置を保ちます。" + # AI Translated msgid "Outer walls" msgstr "外壁" @@ -16955,6 +17041,39 @@ msgstr "ループ上でワイプ" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "閉ループ押出における継ぎ目を目立たなくするため、押出機がループを離れる前にわずかに内側へ移動します。" +# AI Translated +msgid "Wipe inward" +msgstr "内側へ拭き上げ" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"穴の輪郭を含む外壁にのみ適用されます。拭き上げ中に高温のノズルを造形済みの内壁へ向かって動かし、造形したばかりの樹脂の再加熱と継ぎ目の跡を抑えます。\n" +"\n" +"拭き上げの跡が目立ちやすい積層ピッチ0.1 mm未満で特に有効です。\n" +"\n" +"隣接する内壁がまだ造形されていない場合（壁が1本のみの領域や、壁の順序が外側/内側の場合）、または細かい角や継ぎ目の隙間などで支えのある内向きの経路が見つからない場合は、通常の拭き上げを使用します。" + +# AI Translated +msgid "Wipe inward distance" +msgstr "内側への拭き上げ距離" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"拭き上げ経路を外周から離す距離で、ミリメートルまたは実際の外壁の押出線幅に対する割合で指定します。\n" +"\n" +"例えば50%では、経路を外壁幅の半分だけずらします。実効オフセットは実際の外壁幅と隣接する壁までの利用可能な間隔の両方で制限されるため、100%を超える値や同等の絶対距離を指定しても追加の効果はありません。0に設定するとオフセットは無効になります。" + # AI Translated msgid "Wipe before external loop" msgstr "外周ループ前のワイプ" @@ -17257,8 +17376,9 @@ msgstr "印刷温度に達するのを待たずに新しいツールを取り付 msgid "No sparse layers (beta)" msgstr "スパース層なし (ベータ)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "有効にすると、ツール変更がない場合にワイプタワーをプリントしなくなります。 ワイプタワーの高さが同期しなくなりますので、ツールチェンジのあるレイヤーでは、エクストルーダーがプリント面より下方に移動してワイプタワーをプリントするケースもあります。 この場合、プリントした部分との衝突がないことをご自身で確認しておく必要があります。" +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "有効にすると、ツール交換のない積層ではワイプタワーを造形しません。ツール交換のある積層では押出機が下降してワイプタワーを造形するため、タワーはモデルより下に位置し、ツールヘッドがそこまで下りる必要があります。造形済みのオブジェクトと衝突するような配置は拒否されます。全積層にタワーが必要なスムーズタイムラプスやノズル付着検出では効果がありません。" msgid "Prime all printing extruders" msgstr "全てのエクストルーダーでプライムを実施" @@ -17284,6 +17404,34 @@ msgstr "" msgid "Cyclic" msgstr "循環" +# AI Translated +msgid "Cyclic order" +msgstr "循環順" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"循環ツール交換順で使用するカスタムフィラメント順序です。フィラメント番号をカンマ区切りで指定します（例: 「3,2,1,4」）。\n" +"各積層はこの順序に従ってフィラメントを造形します。記載のないフィラメントは最後に、昇順で造形されます。\n" +"空欄のままにすると、フィラメントを昇順で巡回します。" + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "循環順を1層目にも適用" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"循環ツール交換順を1層目にも適用します。\n" +"既定では無効です。1層目は代わりにベッド接着が最良になるよう並べ替えられるためです。1層目の小さく壊れやすい部分を造形するフィラメントを最後に回すことで、その後のツール交換や移動が、弱く固定された部分を剥がしにくくなります。この1層目の順序は、1層目用のカスタムフィラメント順序が設定されていればそれも尊重します。循環順の利点（ツール交換が増えることで各積層の冷却時間が長くなる）は、接着のために低速かつ高温で造形される1層目には当てはまりません。\n" +"接着の最適化を犠牲にしてでも、1層目を含む全積層でまったく同じツール順序が必要な場合にのみ有効にしてください。" + msgid "Slice gap closing radius" msgstr "隙間充填半径" @@ -17294,9 +17442,6 @@ msgstr "三角メッシュのスライス時に、隙間閉じ半径の2倍よ msgid "Slicing Mode" msgstr "スライシングモード" -msgid "Other" -msgstr "その他" - # AI Translated msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "3DLabPrintの飛行機モデルには「偶奇」を使用してください。モデル内のすべての穴を閉じるには「穴を閉じる」を使用してください。" @@ -18357,6 +18502,14 @@ msgstr "チェックなし" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "G-codeパスの競合チェックなど、いかなる妥当性チェックも実行しません。" +# AI Translated +msgid "Strict mode" +msgstr "厳格モード" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "サポートが無効なのにサポートが必要なモデルなど、通常はログに記録されるだけの重大でない警告がスライス時に発生した場合、ゼロ以外の終了コードで終了します。わずかに壊れたスライス結果を決して出荷してはならないCIやスクリプト処理で使用してください。そうした警告はいずれも、Linuxでのみ書き出されるresult.jsonの`warnings`配列に、安定したクラス名とともに列挙されます。サポート確認を省略する--no-checkとは併用できません。" + # AI Translated msgid "Normative check" msgstr "規範チェック" @@ -18371,11 +18524,28 @@ msgstr "出力モデル情報" msgid "This outputs the model’s information." msgstr "出力するモデル情報です。" +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "メッシュを検査 (JSONをstdoutへ)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "読み込んだ各オブジェクトのJSON要約をstdoutに出力して終了します。バウンディングボックスと、設置できる凸包の面、およびそれらの法線・面積・中心が含まれます。--ground-*オプションはこれらの面から選択します。--infoの機械可読版です。" + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "ペイントを検査 (JSONをstdoutへ)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "読み込んだモデルに保存済みの各ペイント層（サポート、継ぎ目、MMUカラー、ファジー壁面）について、状態ごとの面数・表面積・メッシュ座標系のバウンディングボックスを構造化JSONで出力して終了します。GUIでペイントギズモを開く操作の機械可読版です。" + msgid "Export Settings" msgstr "エクスポート設定" -msgid "This exports settings to a file." -msgstr "設定をファイルにエクスポートします。" +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "設定をファイルにエクスポートします。- を指定するとstdoutに書き出します。" msgid "Send progress to pipe" msgstr "パイプに進捗を送信" @@ -18436,6 +18606,30 @@ msgstr "Y軸周りの回転" msgid "Rotation angle around the Y axis in degrees." msgstr "Y軸を中心とした回転角（度単位）。" +# AI Translated +msgid "Ground largest face" +msgstr "最大面を接地" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "各オブジェクトを凸包の最大面で接地させ、ベッドへ落とします。同じ大きさの面が複数ある場合は、すでに下を向いている面が保持されます。載せられるだけの大きさの面がないオブジェクトはそのまま残ります。変換はコマンドラインの順に実行されるため、このオプションより前に指定した回転は尊重されます。--orient 1 はすべての変換の後に実行され、向きを置き換えます。" + +# AI Translated +msgid "Ground face by normal" +msgstr "法線で面を接地" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "各オブジェクトを、外向き法線が方向 NX,NY,NZ に最も近い凸包の面で接地させ、ベッドへ落とします。方向はオブジェクト座標系で指定します。この座標系はこのオプションより前に指定した回転を含み、入力ファイルがオブジェクトを回転していない限りプレートの軸と一致します。例えば 1,0,0 はオブジェクトを +X 側で立たせます。--orient 1 はすべての変換の後に実行され、向きを置き換えます。" + +# AI Translated +msgid "Ground face at point" +msgstr "指定点の面を接地" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "各オブジェクトを、点 X,Y,Z を含む凸包の面で接地させ、ベッドへ落とします。点はオブジェクト座標系で指定します。この座標系はこのオプションより前に指定した回転を含み、--inspect-mesh はこの座標系で面の中心を報告します。該当する面がないオブジェクトはそのまま残り、どのオブジェクトにも該当面がない場合は実行が失敗します。--orient 1 はすべての変換の後に実行され、向きを置き換えます。" + msgid "Scale the model by a float factor." msgstr "指定した比率で伸縮する" @@ -21749,14 +21943,17 @@ msgstr "この操作は元に戻せません。続行しますか？" msgid "Skipping objects." msgstr "オブジェクトをスキップ中。" +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "材料比率" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "モデル高さ" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "比率" msgid "Select Filament" msgstr "フィラメントを選択" @@ -22040,12 +22237,14 @@ msgid "Drying-Dehumidifying" msgstr "乾燥 - 除湿" # AI Translated -msgid " maximum drying temperature is " -msgstr " の最高乾燥温度は " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s の最高乾燥温度は %d°C です。" # AI Translated -msgid " minimum drying temperature is " -msgstr " の最低乾燥温度は " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s の最低乾燥温度は %d°C です。" # AI Translated msgid "This filament may not be completely dried." @@ -22502,6 +22701,97 @@ msgstr "" "反りを避ける\n" "ABSのような反りやすい素材を印刷する場合、ヒートベッドの温度を適切に上げることで、反りが発生する確率を下げることができることをご存知ですか？" +#~ msgid "Other" +#~ msgstr "その他" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "左: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "右: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "最高温度は次の値を超えることはできません " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "最低温度は次の値を下回ることはできません " + +#~ msgid "up to" +#~ msgstr "最大" + +#~ msgid "above" +#~ msgstr "以上" + +#~ msgid "from" +#~ msgstr "から" + +#~ msgid "Configuration package: " +#~ msgstr "設定パッケージ: " + +#~ msgid " updated to " +#~ msgstr " を更新しました " + +#~ msgid "Grouping error: " +#~ msgstr "グルーピングエラー: " + +#~ msgid " can not be placed in the " +#~ msgstr " に配置できません " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " の最高乾燥温度は " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " の最低乾燥温度は " + +# AI Translated +#~ msgid "needs" +#~ msgstr "が必要" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "未有効" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "材料が未公開" + +#~ msgid "Select the language" +#~ msgstr "言語を選択" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "プラグインを選択" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、上面を充填する方向です。\n" +#~ "外向きは面の中心から始まるため、余分な材料が最も目立たない縁へ押し出されます。内向きは縁から始まり、中心の細かいカーブで終わります。\n" +#~ "デフォルトは最短経路順で、どちらの方向にもなり得ます。" + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "中心を基準とするパターン (同心円、アルキメデス弦、八芒星スパイラル) を使用する場合に、底面を充填する方向です。\n" +#~ "内向きは各面を幅の広い外側のカーブから始めるため、中心の細かいカーブが定着しにくいベッドでも1層目の密着性が向上します。外向きは中心から始まり、余分な材料を縁へ押し出します。\n" +#~ "デフォルトは最短経路順で、どちらの方向にもなり得ます。" + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "有効にすると、ツール変更がない場合にワイプタワーをプリントしなくなります。 ワイプタワーの高さが同期しなくなりますので、ツールチェンジのあるレイヤーでは、エクストルーダーがプリント面より下方に移動してワイプタワーをプリントするケースもあります。 この場合、プリントした部分との衝突がないことをご自身で確認しておく必要があります。" + +#~ msgid "This exports settings to a file." +#~ msgstr "設定をファイルにエクスポートします。" + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "ネイティブWaylandのライブビューにはGStreamer GTKビデオシンクが必要です。GStreamer用のgtksinkプラグインをインストールし、OrcaSlicerを再起動してください。" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index 16dc582437..dccc289f47 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2025-06-02 17:12+0900\n" "Last-Translator: crwusiz \n" "Language-Team: \n" @@ -2481,13 +2481,6 @@ msgstr "사용 가능한 업데이트가 있습니다. 사전 설정 번들 대 msgid "%s has been removed." msgstr "%s이(가) 제거되었습니다." - -msgid "Select the language" -msgstr "언어 선택" - -msgid "Language" -msgstr "언어" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3727,11 +3720,15 @@ msgstr "Filament Track Switch에서 현재 필라멘트 되감기" msgid "Switch track at Filament Track Switch" msgstr "Filament Track Switch에서 트랙 전환" -msgid "The maximum temperature cannot exceed " -msgstr "최대 온도는 다음 값을 초과할 수 없습니다 " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "최대 온도는 %d을(를) 초과할 수 없습니다" -msgid "The minmum temperature should not be less than " -msgstr "최소 온도는 다음 값보다 낮아서는 안 됩니다 " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "최소 온도는 %d보다 낮을 수 없습니다" # AI Translated msgid "Type to filter..." @@ -4625,6 +4622,15 @@ msgstr "" "임시 Gcode를 출력 Gcode로 복사하지 못했습니다. SD 카드가 쓰기 잠겨 있나요?\n" "오류 메시지입니다: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"임시 G-code를 출력 G-code로 복사하지 못했습니다.\n" +"오류 메시지: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "임시 Gcode를 출력 Gcode로 복사하지 못했습니다. 대상 장치에 문제가 있을 수 있으니 다시 내보내거나 다른 장치를 사용해 보세요. 손상된 출력 Gcode는 %1%.tmp에 있습니다." @@ -5363,10 +5369,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "값 %s이 범위를 벗어났습니다. 유효한 범위는 %d에서 %d까지입니다." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"%s%% 또는 %s %s입니까?" +msgid "Is it %s%% or %s %s?" +msgstr "%s%% 또는 %s %s입니까?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5392,22 +5399,18 @@ msgstr "잘못된 형식입니다. 필요한 벡터 형식: \"%1%\"" msgid "System agents" msgstr "시스템 에이전트" -# AI Translated -msgid "No plugin selected" -msgstr "선택된 플러그인 없음" - # AI Translated msgid "Add plugin" msgstr "플러그인 추가" -# AI Translated -msgid "Select plugin" -msgstr "플러그인 선택" - # AI Translated msgid "Remove plugin" msgstr "플러그인 제거" +# AI Translated +msgid "No plugin selected" +msgstr "선택된 플러그인 없음" + # AI Translated msgid "Configure" msgstr "구성" @@ -5664,14 +5667,20 @@ msgstr "최적으로 설정" msgid "Regroup filament" msgstr "필라멘트 재그룹핑" -msgid "up to" -msgstr "까지" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "%1% mm까지" -msgid "above" -msgstr "위에" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "%1% mm 이상" -msgid "from" -msgstr "부터" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "%1% mm에서 %2% mm까지" msgid "Usage" msgstr "사용량" @@ -6035,7 +6044,7 @@ msgstr "용량:" msgid "Size:" msgstr "크기:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "레이어 %d, Z = %.2lf mm에서 Gcode 경로 충돌이 발견되었습니다. 충돌하는 객체를 더 멀리 분리하세요 (%s <-> %s)." @@ -6344,11 +6353,13 @@ msgstr "프로젝트 다른 이름으로 저장" msgid "Save current project as" msgstr "현재 프로젝트 다른 이름으로 저장" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "3MF 게시" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "선택한 설정이 포함된 3MF 파일을 내보냅니다" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "3MF/STL/STEP/SVG/OBJ/AMF 가져오기" @@ -7621,6 +7632,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "하부" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "이 설정은 플러그인 기능 유형을 지정하지 않습니다." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "이 설정은 인식할 수 없는 플러그인 기능 유형을 지정합니다: " + # AI Translated msgid "Plugin Selection" msgstr "플러그인 선택" @@ -8195,11 +8214,13 @@ msgstr "이러한 사전 설정 내의 Gcode가 기계 손상을 방지할 수 msgid "Customized Preset" msgstr "사용자 정의 프리셋" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "일부 게시된 설정을 적용할 수 없습니다:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "일부 필라멘트 슬롯이 변경되었습니다:" # AI Translated msgid "Component name(s) inside step file not in UTF-8 format!" @@ -8628,13 +8649,17 @@ msgstr "슬라이스 파일을 다음으로 저장:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "%s 파일이 프린터의 저장 공간으로 전송되었으며 프린터에서 볼 수 있습니다." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "3MF 파일을 다음 이름으로 게시:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"게시할 3MF 파일을 내보내지 못했습니다.\n" +"폴더가 온라인에 있는지, 또는 다른 프로그램이 해당 파일을 열어 두었는지 확인하세요." msgid "Publish" msgstr "게시" @@ -8854,7 +8879,6 @@ msgstr "계속하시겠습니까?" msgid "Language selection" msgstr "언어 선택" - msgid "Asia-Pacific" msgstr "아시아 태평양" @@ -8968,6 +8992,9 @@ msgstr "현재 인스턴스 경로: " msgid "General" msgstr "일반" +msgid "Language" +msgstr "언어" + msgid "Metric" msgstr "미터법" @@ -9463,9 +9490,6 @@ msgstr "슬라이스된 미리보기에서 레이어 슬라이더를 움직일 msgid "Dimmed layer brightness" msgstr "어둡게 표시된 레이어의 밝기" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9896,63 +9920,80 @@ msgstr "데이터 업로드 중" msgid "Jump to webpage" msgstr "웹 페이지로 이동" +# AI Translated msgid "Material" -msgstr "" +msgstr "재료" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "혼합 필라멘트" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "일부 혼합 필라멘트는 게시되지 않을 필라멘트에 의존합니다:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "필라멘트 %d (혼합)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1%에는 %2%이(가) 필요하지만 활성화되어 있지 않습니다." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1%에는 %2%이(가) 필요하지만 해당 재료는 게시되지 않습니다." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "혼합 필라멘트를 게시하려면 사용하는 모든 필라멘트를 활성화하고 전체 게시를 선택하거나 유형 요구 사항을 충족하세요." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "그래도 게시" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "3MF 게시..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "3MF 파일에 게시할 설정을 선택하세요" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "3MF 게시 위키" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "3MF 게시 비디오 가이드" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "혼합 필라멘트 - 위에서 \"활성화\"를 선택하면 전체가 게시됩니다" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "이 혼합 필라멘트를 게시하고 구성 필라멘트를 활성화 + 전체 게시합니다" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "이 필라멘트 슬롯을 3MF 파일에 게시합니다" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "전체 게시" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "이 슬롯의 필라멘트 전체를 3MF 파일에 포함합니다" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "선택되지 않은 항목 필터링" #, c-format, boost-format msgid "Save %s as" @@ -9972,6 +10013,10 @@ msgstr "상위 사전 설정에서 상속한 모든 값을 이 사전 설정으 msgid "Detach from parent" msgstr "상위 항목에서 분리" +# AI Translated +msgid "Save without parent" +msgstr "상위 항목 없이 저장" + # AI Translated msgid "Unique preset" msgstr "독립 사전 설정" @@ -10686,10 +10731,18 @@ msgstr "뭉침 감지에는 프라임 타워가 필요합니다. 프라임 타 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "정밀 Z 높이와 프라임 타워를 함께 활성화하면 슬라이싱 오류가 발생할 수 있습니다. 그래도 정밀 Z 높이를 활성화하시겠습니까?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "스무드 타임랩스는 모든 레이어에 프라임 타워가 필요하므로 \"희소 레이어 없음\"과 함께 사용할 수 없습니다. \"희소 레이어 없음\"이 해제되었습니다." + # AI Translated msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "유연 모드 타임랩스를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 모델에는 결함이 있을 수 있습니다. 프라임 타워를 활성화하시겠습니까?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"희소 레이어 없음\"은 모든 레이어에 프라임 타워가 필요한 스무드 타임랩스와 함께 사용할 수 없습니다. 타임랩스가 기존 모드로 전환되었습니다." + msgid "Still print by object?" msgstr "아직도 객체별로 출력하시나요?" @@ -11066,10 +11119,6 @@ msgstr "호환 프로세스 사전설정" msgid "Printable space" msgstr "출력 가능 공간" -# AI Translated -msgid "Printer Agent" -msgstr "프린터 에이전트" - # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "프린터 통신에 사용할 네트워크 에이전트 구현을 선택합니다. 사용 가능한 에이전트는 시작 시 등록됩니다." @@ -11494,14 +11543,6 @@ msgstr "익스트루더 수" msgid "Capabilities" msgstr "성능" -# AI Translated -msgid "Left: " -msgstr "왼쪽: " - -# AI Translated -msgid "Right: " -msgstr "오른쪽: " - msgid "Show all presets (including incompatible)" msgstr "모든 사전 설정 표시(호환되지 않는 설정 포함)" @@ -12364,15 +12405,22 @@ msgstr "수리 취소됨" msgid "Copying of file %1% to %2% failed: %3%" msgstr "파일 %1%를 %2%으로 복사 실패: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "새 제조사 프로파일 다운로드 중: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "구성 패키지: %1%이(가) %2%(으)로 업데이트되었습니다" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "제조사 프로파일을 다운로드하지 못했습니다: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "구성 업데이트 전에 저장되지 않은 변경 사항을 확인해야 합니다." -msgid "Configuration package: " -msgstr "구성 패키지: " - -msgid " updated to " -msgstr " 로 업데이트되었습니다 " - msgid "Open G-code file:" msgstr "Gcode 파일 열기:" @@ -12437,11 +12485,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "인풋 셰이핑은 Klipper, RepRapFirmware, Marlin 2에서만 지원됩니다." -msgid "Grouping error: " -msgstr "그룹화 오류입니다:" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "그룹화 오류: %1%은(는) 왼쪽 노즐에 배치할 수 없습니다" -msgid " can not be placed in the " -msgstr " 에 배치할 수 없습니다" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "그룹화 오류: %1%은(는) 오른쪽 노즐에 배치할 수 없습니다" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12556,6 +12608,10 @@ msgstr "%1% 이(가) 다른 객체와 너무 가까워 출력 시 충돌이 발 msgid "%1% is too tall, and collisions will be caused." msgstr "%1% 이(가) 너무 높아서 충돌이 출력 시 발생할 수 있습니다." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "모델과 프라임 타워의 상대 위치가 \"희소 레이어 없음\" 기능의 요구 사항을 충족하지 않습니다. 상대 위치를 조정하거나 모델 높이를 낮추거나 \"희소 레이어 없음\"을 해제하세요." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " 이(가) 제외 영역에 너무 가깝습니다. 출력 시 충돌이 발생 할 수 있습니다." @@ -12930,6 +12986,10 @@ msgstr "G-code 대신 3MF 사용" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "프린터가 출력 작업으로 3MF 파일을 허용하는 경우 이 옵션을 활성화하십시오. 활성화하면 Orca Slicer가 슬라이스된 파일을 일반 .gcode 파일 대신 .gcode.3mf로 전송합니다." +# AI Translated +msgid "Printer Agent" +msgstr "프린터 에이전트" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "프린터 통신에 사용할 네트워크 에이전트 구현을 선택합니다." @@ -14029,6 +14089,10 @@ msgstr "정렬된 직선" msgid "Concentric" msgstr "동심" +# AI Translated +msgid "Spiral Inset" +msgstr "나선형 인셋" + msgid "Hilbert Curve" msgstr "힐베르트 곡선" @@ -14122,13 +14186,13 @@ msgstr "상단 표면 채우기 순서" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 상단 표면을 채우는 방향입니다.\n" -"바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작하여 중앙의 좁은 곡선에서 끝납니다.\n" -"기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다." +"중심에서 시작하는 패턴(동심, 나선형 인셋, 아르키메데스 코드, 팔각 나선형)을 사용할 때 상단 표면을 채우는 방향입니다.\n" +"바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작해 중앙의 좁은 곡선으로 끝납니다.\n" +"기본값은 최단 경로 순서를 사용하며, 어느 방향으로든 진행될 수 있습니다." # AI Translated msgid "Bottom surface fill order" @@ -14136,13 +14200,13 @@ msgstr "하단 표면 채우기 순서" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 하단 표면을 채우는 방향입니다.\n" -"안쪽은 각 표면을 더 넓은 바깥쪽 곡선에서 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 빌드 플레이트에서 초기 레이어 접착력이 향상됩니다. 바깥쪽은 중앙에서 시작하여 남는 재료를 가장자리로 밀어냅니다.\n" -"기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다." +"중심에서 시작하는 패턴(동심, 나선형 인셋, 아르키메데스 코드, 팔각 나선형)을 사용할 때 하단 표면을 채우는 방향입니다.\n" +"안쪽은 각 표면을 더 넓은 바깥쪽 곡선부터 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 베드에서 초기 레이어 안착이 개선됩니다. 바깥쪽은 중앙에서 시작해 남는 재료를 가장자리로 밀어냅니다.\n" +"기본값은 최단 경로 순서를 사용하며, 어느 방향으로든 진행될 수 있습니다." msgid "Internal solid infill pattern" msgstr "꽉찬 내부 채우기 패턴" @@ -14246,6 +14310,14 @@ msgstr "시계 반대 방향" msgid "Clockwise" msgstr "시계방향" +# AI Translated +msgid "Distance to rod" +msgstr "로드까지의 거리" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "노즐 끝에서 로드의 먼 쪽 가장자리까지의 수평 거리입니다. 객체별 출력에서 충돌을 피하는 데 사용됩니다." + msgid "Height to rod" msgstr "레일까지의 높이" @@ -16498,6 +16570,20 @@ msgstr "오버행 벽 감지" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "선 너비에 비례하여 오버행 백분율을 감지하고 다른 속도를 사용하여 출력합니다. 100%% 오버행의 경우 브릿지 속도가 사용됩니다." +# AI Translated +msgid "Print unsupported walls last" +msgstr "지지되지 않는 벽을 마지막에 출력" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"완전히 공중에 떠 있는 벽 루프는 이를 받쳐 줄 것이 생긴 뒤에 출력됩니다.\n" +"벽 순서와 관계없이 같은 섬의 다른 벽들보다 나중에, 가장 안쪽부터 압출됩니다.\n" +"이 레이어의 브릿지만이 고정할 수 있는 루프는 해당 브릿지가 출력될 때까지 기다리고, 지지되는 벽을 따라 지나가는 루프는 이를 고정점으로 필요로 하는 채우기보다 앞선 자리를 유지합니다." + # AI Translated msgid "Outer walls" msgstr "외벽" @@ -16949,6 +17035,39 @@ msgstr "루프에서 노즐 청소" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "폐쇄 루프 압출에서 재봉선의 가시성을 최소화하기 위해 압출기가 루프를 떠나기 전에 안쪽으로의 작은 이동이 실행됩니다." +# AI Translated +msgid "Wipe inward" +msgstr "안쪽으로 노즐 청소" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"구멍 경계를 포함한 외벽에만 적용됩니다. 노즐 청소 중 뜨거운 노즐을 이미 출력된 내벽 쪽으로 이동시켜, 갓 출력된 플라스틱의 재가열과 재봉선 자국을 줄입니다.\n" +"\n" +"청소 자국이 더 잘 보이는 0.1 mm 미만의 레이어 높이에서 특히 유용합니다.\n" +"\n" +"인접한 내벽이 아직 출력되지 않았거나(벽이 하나뿐인 영역 또는 외벽/내벽 순서), 좁은 모서리나 재봉선 간격 등에서 지지되는 안쪽 경로를 찾을 수 없는 경우에는 일반 노즐 청소를 사용합니다." + +# AI Translated +msgid "Wipe inward distance" +msgstr "안쪽 노즐 청소 거리" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"노즐 청소 경로를 외곽 둘레에서 밀어내는 거리로, 밀리미터 또는 실제 외벽 압출 너비에 대한 백분율로 지정합니다.\n" +"\n" +"예를 들어 50%는 경로를 외벽 너비의 절반만큼 이동시킵니다. 실제 오프셋은 실제 외벽 너비와 인접한 벽까지의 여유 간격 모두에 의해 제한되므로, 100%를 넘는 값이나 그에 상응하는 절대 거리를 지정해도 추가 효과가 없습니다. 오프셋을 끄려면 0으로 설정하세요." + msgid "Wipe before external loop" msgstr "외부 루프 전 닦아내기" @@ -17219,8 +17338,9 @@ msgstr "출력 온도에 도달할 때까지 기다리지 않고 새 툴을 집 msgid "No sparse layers (beta)" msgstr "희소 레이어 없음(베타)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "활성화되면 툴 체인지 없이 레이어에 프라임 타워가 출력되지 않습니다. 툴 체인지가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 프라임 타워를 출력합니다. 출력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "활성화하면 툴체인지가 없는 레이어에서는 프라임 타워가 출력되지 않습니다. 툴체인지가 있는 레이어에서는 압출기가 아래로 이동해 프라임 타워를 출력하므로, 타워가 모델보다 아래에 놓이고 툴헤드가 거기까지 내려가야 합니다. 이미 출력된 객체와 충돌하게 되는 배치는 거부됩니다. 모든 레이어에 타워가 필요한 스무드 타임랩스나 노즐 클럼핑 감지에서는 효과가 없습니다." msgid "Prime all printing extruders" msgstr "모든 활성화된 압출기 프라이밍" @@ -17246,6 +17366,34 @@ msgstr "" msgid "Cyclic" msgstr "순환" +# AI Translated +msgid "Cyclic order" +msgstr "순환 순서" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"순환 툴체인지 순서에서 사용하는 사용자 지정 필라멘트 순서로, 필라멘트 번호를 쉼표로 구분해 지정합니다(예: \"3,2,1,4\").\n" +"각 레이어는 이 순서에 따라 필라멘트를 출력하며, 목록에 없는 필라멘트는 오름차순으로 마지막에 출력됩니다.\n" +"비워 두면 필라멘트를 오름차순으로 순환합니다." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "초기 레이어에도 순환 순서 적용" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"순환 툴체인지 순서를 초기 레이어에도 적용합니다.\n" +"기본적으로 꺼져 있는데, 초기 레이어는 대신 베드 안착이 가장 잘 되도록 정렬되기 때문입니다. 초기 레이어의 작고 약한 형상을 출력하는 필라멘트를 마지막에 출력하면, 이어지는 툴체인지와 이동 동작이 약하게 고정된 부분을 떨어뜨릴 가능성이 줄어듭니다. 이 초기 레이어 순서는 초기 레이어용 사용자 지정 필라멘트 순서가 설정되어 있으면 그것도 따릅니다. 순환 순서의 이점(툴체인지가 늘어나 각 레이어의 냉각 시간이 길어지는 것)은 안착을 위해 느리고 뜨겁게 출력되는 초기 레이어에는 해당하지 않습니다.\n" +"안착 최적화를 포기하더라도 초기 레이어를 포함한 모든 레이어에서 정확히 같은 툴 순서가 필요한 경우에만 활성화하세요." + msgid "Slice gap closing radius" msgstr "슬라이스 간격 폐쇄 반경" @@ -17255,9 +17403,6 @@ msgstr "간격 폐쇄 반경의 2배보다 작은 균열은 삼각형 메시 슬 msgid "Slicing Mode" msgstr "슬라이싱 모드" -msgid "Other" -msgstr "기타" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "3DLabPrint 비행기 모델에는 \"짝수-홀수\"를 사용하세요. \"구멍 닫기\"를 사용하여 모델의 모든 구멍을 닫습니다." @@ -18279,6 +18424,14 @@ msgstr "확인 안 함" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Gcode 경로 충돌 검사와 같은 유효성 검사를 실행하지 마십시오." +# AI Translated +msgid "Strict mode" +msgstr "엄격 모드" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "서포트가 꺼져 있는데 서포트가 필요한 모델처럼, 평소에는 로그에만 남는 치명적이지 않은 경고가 슬라이싱 중에 발생하면 0이 아닌 코드로 종료합니다. 미묘하게 잘못된 슬라이싱 결과를 절대 내보내면 안 되는 CI나 스크립트 파이프라인에서 사용하세요. 그러한 경고는 Linux에서만 기록되는 result.json의 `warnings` 배열에도 고정된 분류와 함께 나열됩니다. 서포트 검사를 건너뛰는 --no-check와 함께 사용할 수 없습니다." + msgid "Normative check" msgstr "표준 검사" @@ -18291,11 +18444,28 @@ msgstr "모델 정보 출력" msgid "This outputs the model’s information." msgstr "모델 정보를 출력합니다." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "메시 검사 (JSON을 stdout으로)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "불러온 각 객체의 JSON 요약을 stdout으로 출력한 뒤 종료합니다: 경계 상자와 올려놓을 수 있는 볼록 껍질 면, 그리고 각 면의 법선, 면적, 중심이 포함됩니다. --ground-* 옵션이 선택하는 대상이 바로 이 면들입니다. --info의 기계 판독용 대안입니다." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "페인팅 검사 (JSON을 stdout으로)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "불러온 모델에 이미 저장된 모든 페인팅 레이어(서포트, 재봉선, MMU 색상, 퍼지 스킨)에 대해 상태별 면 개수, 표면적, 메시 기준 경계 상자를 구조화된 JSON으로 출력한 뒤 종료합니다. GUI에서 페인팅 도구를 여는 작업의 기계 판독용 대안입니다." + msgid "Export Settings" msgstr "설정 내보내기" -msgid "This exports settings to a file." -msgstr "설정을 파일로 내보내기." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "설정을 파일로 내보냅니다. -를 사용하면 stdout으로 출력합니다." msgid "Send progress to pipe" msgstr "진행 상황을 파이프로 보내기" @@ -18351,6 +18521,30 @@ msgstr "Y를 중심으로 회전" msgid "Rotation angle around the Y axis in degrees." msgstr "Y축을 중심으로 한 회전 각도입니다." +# AI Translated +msgid "Ground largest face" +msgstr "가장 큰 면으로 안착" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "각 객체를 볼록 껍질의 가장 큰 면으로 눕히고 베드로 떨어뜨립니다. 크기가 같은 면이 여럿이면 이미 아래를 향한 면이 유지됩니다. 올려놓을 만큼 큰 면이 없는 객체는 그대로 둡니다. 변환은 명령줄 순서대로 실행되므로 이 옵션보다 앞에 지정한 회전은 유지됩니다. --orient 1은 모든 변환 뒤에 실행되어 방향을 대체합니다." + +# AI Translated +msgid "Ground face by normal" +msgstr "법선 기준 면으로 안착" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "각 객체를 바깥쪽 법선이 방향 NX,NY,NZ에 가장 가까운 볼록 껍질 면으로 눕히고 베드로 떨어뜨립니다. 방향은 객체 좌표계 기준이며, 이 좌표계는 이 옵션보다 앞에 지정한 회전을 포함하고, 입력 파일이 객체를 회전시키지 않는 한 플레이트 축과 일치합니다. 예를 들어 1,0,0은 객체를 +X 쪽으로 세웁니다. --orient 1은 모든 변환 뒤에 실행되어 방향을 대체합니다." + +# AI Translated +msgid "Ground face at point" +msgstr "지정 지점의 면으로 안착" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "각 객체를 점 X,Y,Z를 포함하는 볼록 껍질 면으로 눕히고 베드로 떨어뜨립니다. 점은 객체 좌표계 기준이며, 이 좌표계는 이 옵션보다 앞에 지정한 회전을 포함합니다. --inspect-mesh는 이 좌표계로 면 중심을 알려줍니다. 그러한 면이 없는 객체는 그대로 두며, 어떤 객체에도 해당 면이 없으면 실행이 실패합니다. --orient 1은 모든 변환 뒤에 실행되어 방향을 대체합니다." + msgid "Scale the model by a float factor." msgstr "부동 소수점 계수로 모델 크기 조정" @@ -21606,14 +21800,17 @@ msgstr "이 작업은 취소할 수 없습니다. 계속하시겠습니까?" msgid "Skipping objects." msgstr "물체 건너뛰기" +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "재료 비율" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "모델 높이" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "비율" msgid "Select Filament" msgstr "필라멘트 선택" @@ -21916,12 +22113,14 @@ msgid "Drying-Dehumidifying" msgstr "건조-제습" # AI Translated -msgid " maximum drying temperature is " -msgstr " 최대 건조 온도는 " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s의 최대 건조 온도는 %d°C입니다." # AI Translated -msgid " minimum drying temperature is " -msgstr " 최소 건조 온도는 " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s의 최소 건조 온도는 %d°C입니다." # AI Translated msgid "This filament may not be completely dried." @@ -22368,6 +22567,97 @@ msgstr "" "뒤틀림 방지\n" "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?" +#~ msgid "Other" +#~ msgstr "기타" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "왼쪽: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "오른쪽: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "최대 온도는 다음 값을 초과할 수 없습니다 " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "최소 온도는 다음 값보다 낮아서는 안 됩니다 " + +#~ msgid "up to" +#~ msgstr "까지" + +#~ msgid "above" +#~ msgstr "위에" + +#~ msgid "from" +#~ msgstr "부터" + +#~ msgid "Configuration package: " +#~ msgstr "구성 패키지: " + +#~ msgid " updated to " +#~ msgstr " 로 업데이트되었습니다 " + +#~ msgid "Grouping error: " +#~ msgstr "그룹화 오류입니다:" + +#~ msgid " can not be placed in the " +#~ msgstr " 에 배치할 수 없습니다" + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " 최대 건조 온도는 " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " 최소 건조 온도는 " + +# AI Translated +#~ msgid "needs" +#~ msgstr "필요" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "활성화되지 않음" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "재료 미게시" + +#~ msgid "Select the language" +#~ msgstr "언어 선택" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "플러그인 선택" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 상단 표면을 채우는 방향입니다.\n" +#~ "바깥쪽은 표면 중앙에서 시작하므로 남는 재료가 가장 눈에 덜 띄는 가장자리로 밀려납니다. 안쪽은 가장자리에서 시작하여 중앙의 좁은 곡선에서 끝납니다.\n" +#~ "기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "중심 기반 패턴(동심원, 아르키메데스 현, 팔각별 나선)을 사용할 때 하단 표면을 채우는 방향입니다.\n" +#~ "안쪽은 각 표면을 더 넓은 바깥쪽 곡선에서 시작하므로, 중앙의 좁은 곡선이 잘 붙지 않는 빌드 플레이트에서 초기 레이어 접착력이 향상됩니다. 바깥쪽은 중앙에서 시작하여 남는 재료를 가장자리로 밀어냅니다.\n" +#~ "기본값은 최단 경로 순서를 사용하며 어느 방향으로든 진행될 수 있습니다." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "활성화되면 툴 체인지 없이 레이어에 프라임 타워가 출력되지 않습니다. 툴 체인지가 있는 레이어에서는 압출기가 아래쪽으로 이동하여 프라임 타워를 출력합니다. 출력물과의 충돌이 없는지 확인하는 것은 사용자의 책임입니다." + +#~ msgid "This exports settings to a file." +#~ msgstr "설정을 파일로 내보내기." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "네이티브 Wayland 실시간 보기에는 GStreamer GTK 비디오 싱크가 필요합니다. GStreamer용 gtksink 플러그인을 설치한 후 OrcaSlicer를 다시 시작하십시오." diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po index 0141917d77..7798105df7 100644 --- a/localization/i18n/lt/OrcaSlicer_lt.po +++ b/localization/i18n/lt/OrcaSlicer_lt.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-07-02 14:13+0300\n" "Last-Translator: Gintaras Kučinskas \n" "Language-Team: \n" @@ -2449,13 +2449,6 @@ msgstr "Yra prieinamas atnaujinimas. Atidarykite profilių paketo dialogo langą msgid "%s has been removed." msgstr "%s buvo pašalintas." - -msgid "Select the language" -msgstr "Pasirinkite kalbą" - -msgid "Language" -msgstr "Kalba" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3701,11 +3694,15 @@ msgstr "Ištraukite dabartinę giją ties Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Perjunkite takelį ties Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "Maksimali temperatūra negali viršyti " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Maksimali temperatūra negali viršyti %d" -msgid "The minmum temperature should not be less than " -msgstr "Minimali temperatūra neturi būti mažesnė nei " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Minimali temperatūra neturi būti mažesnė nei %d" msgid "Type to filter..." msgstr "Įveskite tekstą filtravimui..." @@ -4587,6 +4584,15 @@ msgstr "" "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gal draudžiama įrašinėti į SD kortelę?\n" "Klaidos pranešimas: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Nepavyko nukopijuoti laikinojo G kodo į išvesties G kodą.\n" +"Klaidos pranešimas: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Nepavyko nukopijuoti laikinojo G-kodo į išvesties G-kodą. Gali kilti problemų dėl tikslinio įrenginio. Bandykite eksportuoti dar kartą arba naudokite kitą įrenginį. Sugadintas išvesties G-kodas yra %1%.tmp." @@ -5324,10 +5330,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Reikšmė %s yra už ribų. Galimas diapazonas yra nuo %d iki %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Ar tai %s%% ar %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Ar tai %s%% ar %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5353,22 +5360,18 @@ msgstr "Netinkamas formatas. Tinkamas vektorinis formatas: \"%1%\"" msgid "System agents" msgstr "Sisteminiai agentai" -# AI Translated -msgid "No plugin selected" -msgstr "Nepasirinktas joks papildinys" - # AI Translated msgid "Add plugin" msgstr "Pridėti papildinį" -# AI Translated -msgid "Select plugin" -msgstr "Pasirinkti papildinį" - # AI Translated msgid "Remove plugin" msgstr "Pašalinti papildinį" +# AI Translated +msgid "No plugin selected" +msgstr "Nepasirinktas joks papildinys" + # AI Translated msgid "Configure" msgstr "Konfigūruoti" @@ -5624,14 +5627,20 @@ msgstr "Nustatyti į optimalų" msgid "Regroup filament" msgstr "Pergrupuoti gijas" -msgid "up to" -msgstr "iki" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "iki %1% mm" -msgid "above" -msgstr "virš" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "virš %1% mm" -msgid "from" -msgstr "nuo" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "nuo %1% iki %2% mm" msgid "Usage" msgstr "Naudojimas" @@ -5994,7 +6003,7 @@ msgstr "Tūris:" msgid "Size:" msgstr "Dydis:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Rasta G-kodo trajektorijų konfliktų %d sluoksnyje, Z = %.2lfmm. Prašome labiau atskirti konfliktuojančius objektus (%s <-> %s)." @@ -6306,11 +6315,13 @@ msgstr "Įrašyti projektą kaip" msgid "Save current project as" msgstr "Įrašyti dabartinį projektą kaip" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Talpinti 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Eksportuoti 3MF failą su įterptais pasirinktais parametrais" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importuoti 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7585,6 +7596,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Apatinis" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Šis parametras nenurodo papildinio gebos tipo." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Šis parametras nurodo neatpažintą papildinio gebos tipą: " + # AI Translated msgid "Plugin Selection" msgstr "Papildinio pasirinkimas" @@ -8153,11 +8172,13 @@ msgstr "Patvirtinkite, kad šiuose profiliuose esantis G-kodas yra saugus, kad i msgid "Customized Preset" msgstr "Pritaikytas profilis" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Kai kurių patalpintų parametrų pritaikyti nepavyko:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Kai kurie gijų lizdai buvo pakeisti:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Komponentų pavadinimai STEP faile nėra UTF-8 formato!" @@ -8570,13 +8591,17 @@ msgstr "Išsaugoti susluoksniuotą failą kaip:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Failas %s išsiųstas į spausdintuvo laikmeną ir gali būti peržiūrimas spausdintuve." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Talpinti 3MF failą kaip:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Nepavyko eksportuoti patalpinto 3MF failo.\n" +"Patikrinkite, ar aplankas pasiekiamas internete ir ar failo neturi atvėrusios kitos programos." msgid "Publish" msgstr "Talpinti" @@ -8791,7 +8816,6 @@ msgstr "Ar norite tęsti?" msgid "Language selection" msgstr "Kalbos pasirinkimas" - msgid "Asia-Pacific" msgstr "Azija-Ramusis vandenynas" @@ -8896,6 +8920,9 @@ msgstr "Dabartinės versijos kelias: " msgid "General" msgstr "Bendras" +msgid "Language" +msgstr "Kalba" + msgid "Metric" msgstr "Metrinė" @@ -9324,9 +9351,6 @@ msgstr "Slenkant sluoksnių slankiklį pjaustytoje peržiūroje, atvaizduoti že msgid "Dimmed layer brightness" msgstr "Pritemdytų sluoksnių ryškumas" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9723,63 +9747,80 @@ msgstr "Įkeliami duomenys" msgid "Jump to webpage" msgstr "Pereiti į interneto puslapį" +# AI Translated msgid "Material" -msgstr "" +msgstr "Medžiaga" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Mišri gija" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Kai kurios mišrios gijos priklauso nuo gijų, kurios nebus patalpintos:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Gija %d (mišri)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% reikalauja %2%, kuri nėra įjungta." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% reikalauja %2%, kurios medžiaga nebus paskelbta." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Norėdami patalpinti mišrią giją, įjunkite kiekvieną jos naudojamą giją ir pasirinkite Pilną talpinimą arba įvykdykite jos Tipo reikalavimą." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Vis tiek talpinti" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Talpinti 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Pasirinkite, kuriuos parametrus talpinti 3MF faile" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "3MF talpinimo wiki" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "3MF talpinimo vaizdo vadovas" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Mišri gija - talpinama kaip visuma, kai viršuje pasirinkta \"Įjungti\"" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Talpinti šią mišrią giją ir įjungti + pilnai patalpinti jos sudedamąsias gijas" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Talpinti šį gijos lizdą 3MF faile" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Pilnas talpinimas" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Įterpti visą šio lizdo giją į 3MF failą" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtruoti nepasirinktus" #, c-format, boost-format msgid "Save %s as" @@ -9798,6 +9839,10 @@ msgstr "Nukopijuoja į šį profilį visas iš pirminio profilio paveldėtas rei msgid "Detach from parent" msgstr "Atskirti nuo tėvinio profilio" +# AI Translated +msgid "Save without parent" +msgstr "Išsaugoti be tėvinio profilio" + # AI Translated msgid "Unique preset" msgstr "Savarankiškas profilis" @@ -10500,9 +10545,17 @@ msgstr "Norint aptikti gumbų susidarymą, reikalingas valymo bokštas. Be valym msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Įjungus ir tikslų Z aukštį, ir valymo bokštą, gali kilti sluoksniavimo klaidų. Ar vis tiek norite įjungti tikslų Z aukštį?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Sklandžiam pakadriniam filmavimui (timelapse) reikia valymo bokšto kiekviename sluoksnyje, o tai nesuderinama su parinktimi \"Nėra retų sluoksnių\". Parinktis \"Nėra retų sluoksnių\" buvo išjungta." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Norint sklandžiai įrašyti laiko tarpų (timelapse) vaizdo įrašą, reikalingas valymo bokštas. Be valymo bokšto modelyje gali atsirasti defektų. Ar norite įjungti valymo bokštą?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "Parinktis \"Nėra retų sluoksnių\" nesuderinama su sklandžiu pakadriniu filmavimu (timelapse), kuriam reikia valymo bokšto kiekviename sluoksnyje. Pakadrinis filmavimas perjungtas į tradicinį režimą." + msgid "Still print by object?" msgstr "Vis dar spausdinti pagal objektą?" @@ -10875,9 +10928,6 @@ msgstr "Suderinami apdorojimo profiliai" msgid "Printable space" msgstr "Erdvė spausdinimui" -msgid "Printer Agent" -msgstr "Spausdintuvo agentas" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Pasirinkite tinklo agento modulį ryšiui su spausdintuvu palaikyti. Prieinami agentai užregistruojami paleidimo metu." @@ -11280,12 +11330,6 @@ msgstr "Ekstruderių skaičius" msgid "Capabilities" msgstr "Galimybės" -msgid "Left: " -msgstr "Kairė:" - -msgid "Right: " -msgstr "Dešinė:" - msgid "Show all presets (including incompatible)" msgstr "Rodyti visus profilius (įskaitant nesuderinamus)" @@ -12124,15 +12168,22 @@ msgstr "Taisymas atšauktas" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Failo %1% kopijavimas į %2% nepavyko: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Atsisiunčiami nauji gamintojų profiliai: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Konfigūracijos paketas: %1% atnaujintas į %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Nepavyko atsisiųsti gamintojų profilių: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Prieš atnaujinant konfigūraciją reikia patikrinti neišsaugotus pakeitimus." -msgid "Configuration package: " -msgstr "Konfigūracijos paketas: " - -msgid " updated to " -msgstr " atnaujintas į " - msgid "Open G-code file:" msgstr "Atidaryti G-kodo failą:" @@ -12192,11 +12243,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "„Input shaping“ funkcija palaikoma tik „Klipper“, „RepRapFirmware“ ir „Marlin 2“ programinėje aparatinėje įrangoje" -msgid "Grouping error: " -msgstr "Grupavimo klaida: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Grupavimo klaida: %1% negalima įdėti į kairįjį purkštuką" -msgid " can not be placed in the " -msgstr "negali būti įkeltas į " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Grupavimo klaida: %1% negalima įdėti į dešinįjį purkštuką" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12310,6 +12365,10 @@ msgstr "%1% yra per arti kitų, todėl gali įvykti susidūrimas." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% yra per aukštas, todėl įvyks susidūrimai." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Modelio ir valymo bokšto tarpusavio padėtis neatitinka funkcijos \"Nėra retų sluoksnių\" reikalavimų. Pakoreguokite jų tarpusavio padėtį, sumažinkite modelio aukštį arba išjunkite parinktį \"Nėra retų sluoksnių\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " yra per arti uždraustosios zonos, spausdinant gali įvykti susidūrimų." @@ -12655,6 +12714,9 @@ msgstr "Vietoj G-kodo naudoti 3MF" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Įjunkite, jei spausdintuvas spausdinimo užduotims priima 3MF failus. Kai įjungta, „Orca Slicer“ sugeneruotą failą siunčia kaip „.gcode.3mf“, o ne kaip paprastą „.gcode“ failą." +msgid "Printer Agent" +msgstr "Spausdintuvo agentas" + msgid "Select the network agent implementation for printer communication." msgstr "Pasirinkite tinklo agento modulį ryšiui su spausdintuvu palaikyti." @@ -13699,6 +13761,10 @@ msgstr "Sulygiuotas tiesiaeigis" msgid "Concentric" msgstr "Koncentrinis" +# AI Translated +msgid "Spiral Inset" +msgstr "Spiralinis poslinkis" + msgid "Hilbert Curve" msgstr "Hilberto kreivė" @@ -13790,13 +13856,13 @@ msgstr "Viršutinio paviršiaus užpildymo tvarka" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Kryptis, kuria užpildomi viršutiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n" -"„Į išorę“ prasideda paviršiaus centre, todėl bet koks perteklinė medžiaga stumiama link krašto, kur ji mažiausiai matoma. „Į vidų“ prasideda nuo krašto ir baigiasi ankštomis kreivėmis centre.\n" -"Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi." +"Kryptis, kuria užpildomi viršutiniai paviršiai naudojant nuo centro einantį raštą (Koncentrinis, Spiralinis poslinkis, Archimedo akordai, Oktagramos spiralė).\n" +"Į išorę pradeda nuo paviršiaus centro, todėl medžiagos perteklius stumiamas link krašto, kur jis mažiausiai matomas. Į vidų pradeda nuo krašto ir baigia ankštais posūkiais centre.\n" +"Numatytasis naudoja trumpiausio kelio eiliškumą, kuris gali eiti bet kuria kryptimi." # AI Translated msgid "Bottom surface fill order" @@ -13804,13 +13870,13 @@ msgstr "Apatinio paviršiaus užpildymo tvarka" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Kryptis, kuria užpildomi apatiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n" -"„Į vidų“ pradeda kiekvieną paviršių platesnėmis išorinėmis kreivėmis, o tai pagerina pirmojo sluoksnio sukibimą ant pagrindų, kur ankštos kreivės centre gali nesilaikyti. „Į išorę“ prasideda centre, stumdama bet kokią perteklinę medžiagą link krašto.\n" -"Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi." +"Kryptis, kuria užpildomi apatiniai paviršiai naudojant nuo centro einantį raštą (Koncentrinis, Spiralinis poslinkis, Archimedo akordai, Oktagramos spiralė).\n" +"Į vidų pradeda kiekvieną paviršių nuo platesnių išorinių posūkių, o tai pagerina pirmojo sluoksnio sukibimą su pagrindais, prie kurių ankšti posūkiai centre gali nepriliptų. Į išorę pradeda nuo centro ir stumia medžiagos perteklių link krašto.\n" +"Numatytasis naudoja trumpiausio kelio eiliškumą, kuris gali eiti bet kuria kryptimi." msgid "Internal solid infill pattern" msgstr "Vidinio tvirto užpildo raštas" @@ -13909,6 +13975,14 @@ msgstr "Prieš laikrodžio rodyklę" msgid "Clockwise" msgstr "Pagal laikrodžio rodyklę" +# AI Translated +msgid "Distance to rod" +msgstr "Atstumas iki strypo" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Horizontalus atstumas nuo purkštuko galiuko iki tolimesnio strypo krašto. Naudojamas susidūrimams išvengti spausdinant objektą po objekto." + msgid "Height to rod" msgstr "Aukštis iki ašies (strypo)" @@ -16064,6 +16138,20 @@ msgstr "Aptikti iškyšų sieneles" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Nustatykite iškyšos procentinę dalį, palyginti su linijos pločiu, ir naudokite skirtingą spausdinimo greitį. Jei iškyša 100%%, naudojamas tilto greitis." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Neatremtas sieneles spausdinti paskutines" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Sienelės kontūrai, esantys visiškai ore, spausdinami tik tada, kai juos yra kam palaikyti:\n" +"jie išspaudžiami po kitų savo salos sienelių, pradedant nuo vidinės, nepriklausomai nuo sienelių eiliškumo.\n" +"Kontūras, kurį gali įtvirtinti tik šio sluoksnio tiltai, laukia, kol tie tiltai bus atspausdinti, o kontūras, einantis šalia atremtos sienelės, išlaiko savo vietą prieš užpildą, kuriam jis reikalingas kaip įtvirtinimas." + msgid "Outer walls" msgstr "Išorinės sienelės" @@ -16497,6 +16585,39 @@ msgstr "Nuvalyti kilpas" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Siekiant sumažinti siūlės matomumą uždaroje ekstruzijos kilpoje, prieš ekstruderiui išeinant iš kilpos atliekamas nedidelis judesys į vidų." +# AI Translated +msgid "Wipe inward" +msgstr "Valymas į vidų" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Taikoma tik išorinėms sienelėms, įskaitant skylių kontūrus. Valymo metu karštą purkštuką patraukia link jau atspausdintų vidinių sienelių, kad sumažintų ką tik atspausdinto plastiko pakartotinį įkaitimą ir siūlės žymes.\n" +"\n" +"Ypač naudinga esant mažesniam nei 0,1 mm sluoksnio aukščiui, kai valymo žymės labiau matomos.\n" +"\n" +"Naudoja įprastą valymą, jei nėra jau atspausdintos gretimos vidinės sienelės (vienos sienelės sritys arba sienelių eiliškumas Išorinis / vidinis) arba jei nepavyksta rasti atremto kelio į vidų, pavyzdžiui, ankštuose kampuose ar siūlės tarpuose." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Valymo į vidų atstumas" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Atstumas, kuriuo valymo kelias pastumiamas nuo išorinio kontūro, nurodomas milimetrais arba procentais nuo faktinio išorinės sienelės išspaudimo pločio.\n" +"\n" +"Pavyzdžiui, 50% pastumia kelią per pusę išorinės sienelės pločio. Faktinį poslinkį riboja tiek tikrasis išorinės sienelės plotis, tiek laisvas tarpas iki gretimos sienelės, todėl didesnės nei 100% reikšmės ar joms lygiavertis absoliutus atstumas papildomo poveikio neturi. Nustatykite 0, kad poslinkis būtų išjungtas." + msgid "Wipe before external loop" msgstr "Valymas prieš išorinį kontūrą" @@ -16758,8 +16879,9 @@ msgstr "Paima naują įrankį nelaukdamas, kol jis pasieks spausdinimo temperat msgid "No sparse layers (beta)" msgstr "Nėra retų sluoksnių (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Jei įjungta, valymo bokštas nebus spausdinamas tuose sluoksniuose, kur įrankis nekeičiamas. Sluoksniuose, kur įrankis keičiamas, ekstruderis nusileis žemyn atspausdinti valymo bokšto dalies. Naudotojas pats atsako už tai, kad ekstruderis nesusidurtų su spaudiniu." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Jei įjungta, valymo bokštas nebus spausdinamas sluoksniuose be įrankio keitimų. Sluoksniuose su įrankio keitimu ekstruderis nusileis žemyn, kad atspausdintų valymo bokštą, todėl bokštas atsiduria žemiau modelio ir spausdinimo galvutė turi prie jo pasiekti žemyn. Išdėstymai, kuriuose tai susidurtų su jau atspausdintu objektu, atmetami. Neveikia esant sklandžiam pakadriniam filmavimui ar purkštuko apnašų aptikimui, nes jiems reikia bokšto kiekviename sluoksnyje." msgid "Prime all printing extruders" msgstr "Paruošti (prime) visus spausdinimo ekstruderius" @@ -16785,6 +16907,34 @@ msgstr "" msgid "Cyclic" msgstr "Ciklinė" +# AI Translated +msgid "Cyclic order" +msgstr "Ciklinis eiliškumas" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Pasirinktinė gijų seka, naudojama cikliniame įrankių keitimo eiliškume, kaip kableliais atskirti gijų numeriai (pvz., \"3,2,1,4\").\n" +"Kiekvienas sluoksnis spausdina savo gijas pagal šią seką; nenurodytos gijos spausdinamos paskutinės, didėjimo tvarka.\n" +"Palikite tuščią, kad gijos būtų perrenkamos didėjimo tvarka." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Taikyti ciklinį eiliškumą pirmajam sluoksniui" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Taiko ciklinį įrankių keitimo eiliškumą ir pirmajam sluoksniui.\n" +"Pagal numatytuosius nustatymus tai išjungta, nes pirmasis sluoksnis vietoj to išdėstomas siekiant geriausio sukibimo su pagrindu: gijos, kuriomis spausdinamos mažos, trapios pirmojo sluoksnio detalės, spausdinamos paskutinės, todėl tolesni įrankių keitimai ir tuščiosios eigos rečiau nuplėšia tas silpnai įtvirtintas dalis. Šis pirmojo sluoksnio eiliškumas taip pat atsižvelgia į pirmojo sluoksnio pasirinktinę gijų seką, jei ji nustatyta. Ciklinio eiliškumo nauda (papildomi įrankių keitimai kiekvienam sluoksniui suteikia daugiau laiko atvėsti) pirmajam sluoksniui negalioja, nes jis spausdinamas lėtai ir karštas dėl sukibimo.\n" +"Įjunkite tai tik tuomet, jei jums reikia tiksliai tokios pačios įrankių sekos kiekviename sluoksnyje, įskaitant pirmąjį, aukojant šį sukibimo optimizavimą." + msgid "Slice gap closing radius" msgstr "Sluoksniavimo tarpo uždarymo spindulys" @@ -16794,9 +16944,6 @@ msgstr "Plyšiai, mažesni nei 2x tarpo uždarymo spindulys, užpildomi trikampi msgid "Slicing Mode" msgstr "Sluoksniavimo režimas" -msgid "Other" -msgstr "Kita" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "„3DLabPrint“ lėktuvų modeliams naudokite „Lyginis-nelyginis“. Naudokite „Uždaryti kiaurymes“, kad uždarytumėte visas modelio kiaurymes." @@ -17799,6 +17946,14 @@ msgstr "Netikrinama" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Nevykdyti jokių tinkamumo patikrinimų, pavyzdžiui, G-kodo (G-code) trajektorijų konfliktų patikros." +# AI Translated +msgid "Strict mode" +msgstr "Griežtas režimas" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Baigia darbą su ne nuliniu kodu, kai sluoksniuojant pateikiamas nekritinis įspėjimas, kuris kitu atveju būtų tik užregistruotas žurnale, pavyzdžiui, modelis, kuriam reikia atramų, kai atramos išjungtos. Naudokite tai CI arba scenarijais valdomuose procesuose, kurie niekada neturėtų pateikti nepastebimai sugadinto rezultato. Kiekvienas toks įspėjimas taip pat nurodomas su pastoviu klasės vardu result.json masyve `warnings`, kuris rašomas tik Linux sistemoje. Negalima derinti su --no-check, kuris praleidžia atramų patikrą." + msgid "Normative check" msgstr "Normatyvinė patikra" @@ -17811,11 +17966,28 @@ msgstr "Išvesti modelio informaciją" msgid "This outputs the model’s information." msgstr "Tai išveda modelio informaciją." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Tikrinti tinklelį (JSON į stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Išveda į stdout JSON santrauką apie kiekvieną įkeltą objektą ir baigia darbą: jo ribojančius gretasienius ir iškiliojo apvalkalo sienas, ant kurių jį galima paguldyti, su jų normalėmis, plotais ir centrais. Būtent iš šių sienų renkasi --ground-* parinktys. Kompiuterio skaitoma alternatyva --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Tikrinti piešinį (JSON į stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Išveda struktūrizuotą JSON santrauką apie kiekvieną piešimo sluoksnį (atramos, siūlė, MMU spalva, grublėtas paviršius), jau įrašytą į įkeltą modelį — sienelių skaičių, paviršiaus plotą ir ribojantį gretasienį tinklelio koordinatėmis kiekvienai būsenai — ir baigia darbą. Kompiuterio skaitoma alternatyva piešimo įrankių atvėrimui sąsajoje." + msgid "Export Settings" msgstr "Eksportavimo nustatymai" -msgid "This exports settings to a file." -msgstr "Tai eksportuoja nustatymus į failą." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Tai eksportuoja parametrus į failą. Naudokite -, kad jie būtų įrašyti į stdout." msgid "Send progress to pipe" msgstr "Siųsti pažangą į kanalą" @@ -17871,6 +18043,30 @@ msgstr "Pasukti aplink Y ašį" msgid "Rotation angle around the Y axis in degrees." msgstr "Sukimosi kampas aplink Y ašį laipsniais." +# AI Translated +msgid "Ground largest face" +msgstr "Guldyti ant didžiausios sienos" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Paguldo kiekvieną objektą ant didžiausios jo iškiliojo apvalkalo sienos ir nuleidžia jį ant pagrindo. Iš vienodo dydžio sienų paliekama ta, kuri jau nukreipta žemyn. Objektai, neturintys pakankamai didelės sienos atsiremti, paliekami tokie, kokie yra. Transformacijos vykdomos komandų eilutės tvarka, todėl prieš šią parinktį nurodyti pasukimai išlaikomi. --orient 1 vykdoma po visų transformacijų ir pakeičia orientaciją." + +# AI Translated +msgid "Ground face by normal" +msgstr "Guldyti ant sienos pagal normalę" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Paguldo kiekvieną objektą ant tos iškiliojo apvalkalo sienos, kurios išorinė normalė arčiausia krypties NX,NY,NZ, ir nuleidžia jį ant pagrindo. Kryptis nurodoma objekto koordinatėmis, kurios apima prieš šią parinktį nurodytus pasukimus ir sutampa su pagrindo ašimis, nebent įvesties failas objektą pasuka. Pavyzdžiui, 1,0,0 pastato objektą ant jo +X pusės. --orient 1 vykdoma po visų transformacijų ir pakeičia orientaciją." + +# AI Translated +msgid "Ground face at point" +msgstr "Guldyti ant sienos taške" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Paguldo kiekvieną objektą ant tos iškiliojo apvalkalo sienos, kurioje yra taškas X,Y,Z, ir nuleidžia jį ant pagrindo. Taškas nurodomas objekto koordinatėmis, kurios apima prieš šią parinktį nurodytus pasukimus; --inspect-mesh pateikia sienų centrus būtent jomis. Objektai, neturintys tokios sienos, paliekami tokie, kokie yra, o vykdymas nepavyksta, jei tokios sienos neturi nė vienas objektas. --orient 1 vykdoma po visų transformacijų ir pakeičia orientaciją." + msgid "Scale the model by a float factor." msgstr "Keisti modelio mastelį pagal slankiojo kablelio koeficientą." @@ -20935,14 +21131,17 @@ msgstr "Šio veiksmo atšaukti nebus galima. Tęsti?" msgid "Skipping objects." msgstr "Praleidžiami objektai." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Medžiagos santykis" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Modelio aukštis" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Santykis" msgid "Select Filament" msgstr "Pasirinkti giją" @@ -21198,12 +21397,14 @@ msgid "Drying-Dehumidifying" msgstr "Džiovinimas – sausinimas" # AI Translated -msgid " maximum drying temperature is " -msgstr " didžiausia džiovinimo temperatūra yra " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Didžiausia %s džiovinimo temperatūra yra %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " mažiausia džiovinimo temperatūra yra " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Mažiausia %s džiovinimo temperatūra yra %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -21648,6 +21849,95 @@ msgstr "" "Venkite deformacijų (warping)\n" "Ar žinojote, kad spausdinant medžiagas, kurios yra linkusios trauktis ir riestis (pvz., ABS), tinkamas kaitinamojo pagrindo temperatūros padidinimas gali sumažinti deformacijų (warping) tikimybę?" +#~ msgid "Other" +#~ msgstr "Kita" + +#~ msgid "Left: " +#~ msgstr "Kairė:" + +#~ msgid "Right: " +#~ msgstr "Dešinė:" + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Maksimali temperatūra negali viršyti " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Minimali temperatūra neturi būti mažesnė nei " + +#~ msgid "up to" +#~ msgstr "iki" + +#~ msgid "above" +#~ msgstr "virš" + +#~ msgid "from" +#~ msgstr "nuo" + +#~ msgid "Configuration package: " +#~ msgstr "Konfigūracijos paketas: " + +#~ msgid " updated to " +#~ msgstr " atnaujintas į " + +#~ msgid "Grouping error: " +#~ msgstr "Grupavimo klaida: " + +#~ msgid " can not be placed in the " +#~ msgstr "negali būti įkeltas į " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " didžiausia džiovinimo temperatūra yra " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " mažiausia džiovinimo temperatūra yra " + +# AI Translated +#~ msgid "needs" +#~ msgstr "reikalauja" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "neįjungta" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "medžiaga nepatalpinta" + +#~ msgid "Select the language" +#~ msgstr "Pasirinkite kalbą" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Pasirinkti papildinį" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Kryptis, kuria užpildomi viršutiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n" +#~ "„Į išorę“ prasideda paviršiaus centre, todėl bet koks perteklinė medžiaga stumiama link krašto, kur ji mažiausiai matoma. „Į vidų“ prasideda nuo krašto ir baigiasi ankštomis kreivėmis centre.\n" +#~ "Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Kryptis, kuria užpildomi apatiniai paviršiai naudojant į centrą orientuotą raštą (koncentrinį, Archimedo stygų, Oktogramos spiralės).\n" +#~ "„Į vidų“ pradeda kiekvieną paviršių platesnėmis išorinėmis kreivėmis, o tai pagerina pirmojo sluoksnio sukibimą ant pagrindų, kur ankštos kreivės centre gali nesilaikyti. „Į išorę“ prasideda centre, stumdama bet kokią perteklinę medžiagą link krašto.\n" +#~ "Numatytoji tvarka naudoja trumpiausio kelio rikiavimą, kuris gali vykti bet kuria kryptimi." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Jei įjungta, valymo bokštas nebus spausdinamas tuose sluoksniuose, kur įrankis nekeičiamas. Sluoksniuose, kur įrankis keičiamas, ekstruderis nusileis žemyn atspausdinti valymo bokšto dalies. Naudotojas pats atsako už tai, kad ekstruderis nesusidurtų su spaudiniu." + +#~ msgid "This exports settings to a file." +#~ msgstr "Tai eksportuoja nustatymus į failą." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Tiesioginei „Native Wayland“ peržiūrai reikalingas „GStreamer GTK“ vaizdo sinchronizatorius (video sink). Įdiekite „GStreamer“ skirtą „gtksink“ papildinį, tada iš naujo paleiskite „OrcaSlicer“." diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index a767093bb8..24d2f3a322 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -2679,13 +2679,6 @@ msgstr "Er is een update beschikbaar. Open het dialoogvenster voor de voorinstel msgid "%s has been removed." msgstr "%s is verwijderd." - -msgid "Select the language" -msgstr "Kies de taal" - -msgid "Language" -msgstr "Taal" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -4031,12 +4024,14 @@ msgid "Switch track at Filament Track Switch" msgstr "Van baan wisselen bij de Filament Track Switch" # AI Translated -msgid "The maximum temperature cannot exceed " -msgstr "De maximumtemperatuur mag niet hoger zijn dan " +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "De maximumtemperatuur mag niet hoger zijn dan %d" # AI Translated -msgid "The minmum temperature should not be less than " -msgstr "De minimumtemperatuur mag niet lager zijn dan " +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "De minimumtemperatuur mag niet lager zijn dan %d" # AI Translated msgid "Type to filter..." @@ -5008,6 +5003,15 @@ msgstr "" "Fout bij het exporteren naar output-G-code. Is de SD-kaart geblokkeerd tegen schrijven?\n" "Foutbericht: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Het kopiëren van de tijdelijke G-code naar de uitvoer-G-code is mislukt.\n" +"Foutmelding: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Fout bij het exporteren naar output-G-code. Het probleem ligt mogelijk bij het doelapparaat. Probeer het opnieuw te exporteren of gebruik een ander apparat. De beschadigde G-code is opgeslagen als %1%.tmp." @@ -5830,10 +5834,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Waarde %s valt buiten het bereik. Het geldige bereik loopt van %d tot %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Is het %s%% or %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Is het %s%% or %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5862,22 +5867,18 @@ msgstr "Onjuist formaat. Het Vector formaat wordt verwacht: \"%1%\"" msgid "System agents" msgstr "Systeemagenten" -# AI Translated -msgid "No plugin selected" -msgstr "Geen plug-in geselecteerd" - # AI Translated msgid "Add plugin" msgstr "Plug-in toevoegen" -# AI Translated -msgid "Select plugin" -msgstr "Plug-in selecteren" - # AI Translated msgid "Remove plugin" msgstr "Plug-in verwijderen" +# AI Translated +msgid "No plugin selected" +msgstr "Geen plug-in geselecteerd" + # AI Translated msgid "Configure" msgstr "Configureren" @@ -6154,14 +6155,20 @@ msgstr "Op optimaal instellen" msgid "Regroup filament" msgstr "Filamenten opnieuw groeperen" -msgid "up to" -msgstr "tot" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "tot %1% mm" -msgid "above" -msgstr "Boven" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "boven %1% mm" -msgid "from" -msgstr "Van" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "van %1% tot %2% mm" msgid "Usage" msgstr "Gebruik" @@ -6547,7 +6554,7 @@ msgid "Size:" msgstr "Maat:" # AI Translated -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Er zijn conflicten tussen G-code-paden gevonden op laag %d, Z = %.2lfmm. Plaats de conflicterende objecten verder uit elkaar (%s <-> %s)." @@ -6882,11 +6889,13 @@ msgstr "Bewaar project als" msgid "Save current project as" msgstr "Bewaar huidig project als" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "3MF publiceren" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Een 3MF-bestand exporteren met de geselecteerde instellingen erin ingesloten" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "3MF/STL/STEP/SVG/OBJ/AMF importeren" @@ -8273,6 +8282,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Onderste" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Deze instelling geeft geen type plug-infunctionaliteit op." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Deze instelling geeft een niet-herkend type plug-infunctionaliteit op: " + # AI Translated msgid "Plugin Selection" msgstr "Plug-inselectie" @@ -8904,11 +8921,13 @@ msgstr "Controleer of de G-codes in deze presets veilig zijn om schade aan de ma msgid "Customized Preset" msgstr "Aangepaste voorinstelling" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Sommige gepubliceerde instellingen konden niet worden toegepast:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Sommige filamentsleuven zijn gewijzigd:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Naam van componenten in step-bestand is niet UTF-8-formaat!" @@ -9345,13 +9364,17 @@ msgstr "Bewaar het geslicede bestand als:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Het bestand %s is naar de opslagruimte van de printer gestuurd en kan op de printer worden bekeken." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "3MF-bestand publiceren als:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Het exporteren van het gepubliceerde 3MF-bestand is mislukt.\n" +"Controleer of de map online bestaat of dat andere programma's het bestand geopend hebben." msgid "Publish" msgstr "Publiceren" @@ -9596,7 +9619,6 @@ msgstr "Wilt u doorgaan?" msgid "Language selection" msgstr "Taal selectie" - msgid "Asia-Pacific" msgstr "Azië-Pacific" @@ -9711,6 +9733,9 @@ msgstr "Huidig instancepad: " msgid "General" msgstr "Algemeen" +msgid "Language" +msgstr "Taal" + msgid "Metric" msgstr "Metrisch" @@ -10215,9 +10240,6 @@ msgstr "Bij het verschuiven van de laagschuifregelaar in de slicevoorvertoning w msgid "Dimmed layer brightness" msgstr "Helderheid van gedimde lagen" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -10657,63 +10679,80 @@ msgstr "Gegevens uploaden" msgid "Jump to webpage" msgstr "Ga naar de website" +# AI Translated msgid "Material" -msgstr "" +msgstr "Materiaal" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Gemengd filament" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Sommige gemengde filamenten zijn afhankelijk van filamenten die niet worden gepubliceerd:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (gemengd)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% heeft %2% nodig, dat niet is ingeschakeld." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% heeft %2% nodig, waarvan het materiaal niet wordt gepubliceerd." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Om een gemengd filament te publiceren, schakel je elk filament in dat het gebruikt en kies je Volledig publiceren of voldoe je aan de Type-vereiste ervan." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Toch publiceren" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "3MF publiceren..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Selecteer welke instellingen in het 3MF-bestand worden gepubliceerd" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki over 3MF publiceren" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Videohandleiding over 3MF publiceren" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Gemengd filament - wordt als geheel gepubliceerd wanneer hierboven \"Inschakelen\" is geselecteerd" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Dit gemengde filament publiceren en de samenstellende filamenten inschakelen + volledig publiceren" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Deze filamentsleuf publiceren in het 3MF-bestand" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Volledig publiceren" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Het volledige filament van deze sleuf insluiten in het 3MF-bestand" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Niet-geselecteerde filteren" #, c-format, boost-format msgid "Save %s as" @@ -10733,6 +10772,10 @@ msgstr "Kopieert alle overgeërfde waarden van de bovenliggende voorinstelling n msgid "Detach from parent" msgstr "Losmaken van bovenliggend element" +# AI Translated +msgid "Save without parent" +msgstr "Opslaan zonder bovenliggend element" + # AI Translated msgid "Unique preset" msgstr "Unieke voorinstelling" @@ -11503,9 +11546,17 @@ msgstr "Voor klontdetectie is een prime toren vereist. Zonder prime toren kunnen msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Het inschakelen van zowel precieze Z-hoogte als de spoeltoren kan slicefouten veroorzaken. Wilt u precieze Z-hoogte nog steeds inschakelen?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Vloeiende timelapse heeft op elke laag een prime toren nodig, wat niet samengaat met \"Geen dunne lagen\". \"Geen dunne lagen\" is uitgeschakeld." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Een prime-toren is vereist voor een vloeiende timelapse-modus. Er kunnen gebreken ontstaan aan het model zonder prime-toren. Wilt u de prime-toren inschakelen?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Geen dunne lagen\" gaat niet samen met vloeiende timelapse, die op elke laag een prime toren nodig heeft. De timelapse is overgeschakeld naar de traditionele modus." + msgid "Still print by object?" msgstr "Print je nog steeds per object?" @@ -11894,10 +11945,6 @@ msgstr "Geschikte proces profielen" msgid "Printable space" msgstr "Ruimte waarbinnen geprint kan worden" -# AI Translated -msgid "Printer Agent" -msgstr "Printeragent" - # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Selecteer de implementatie van de netwerkagent voor de communicatie met de printer. Beschikbare agenten worden bij het opstarten geregistreerd." @@ -12338,14 +12385,6 @@ msgstr "Aantal extruders" msgid "Capabilities" msgstr "Mogelijkheden" -# AI Translated -msgid "Left: " -msgstr "Links: " - -# AI Translated -msgid "Right: " -msgstr "Rechts: " - msgid "Show all presets (including incompatible)" msgstr "Toon alle presets (inclusief incompatibele)" @@ -13288,17 +13327,22 @@ msgstr "Repareren geannuleerd" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Het kopieeren van bestand %1% naar %2% is mislukt: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Nieuwe leveranciersprofielen downloaden: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Configuratiepakket: %1% bijgewerkt naar %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Downloaden van leveranciersprofielen mislukt: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Controleer niet-opgeslagen wijzigingen voordat u de configuratie bijwerkt." -# AI Translated -msgid "Configuration package: " -msgstr "Configuratiepakket: " - -# AI Translated -msgid " updated to " -msgstr " bijgewerkt naar " - msgid "Open G-code file:" msgstr "Open G-code bestand:" @@ -13366,12 +13410,14 @@ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping wordt alleen ondersteund door Klipper, RepRapFirmware en Marlin 2." # AI Translated -msgid "Grouping error: " -msgstr "Groeperingsfout: " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Groeperingsfout: %1% kan niet in de linker nozzle worden geplaatst" # AI Translated -msgid " can not be placed in the " -msgstr " kan niet worden geplaatst in de " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Groeperingsfout: %1% kan niet in de rechter nozzle worden geplaatst" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -13486,6 +13532,10 @@ msgstr "%1% staat te dicht bij anderen en er kunnen botsingen ontstaan." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% is te hoog en er kunnen botsingen ontstaan." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "De onderlinge positie van het model en de prime toren voldoet niet aan de eisen van de functie \"Geen dunne lagen\". Pas hun onderlinge posities aan, verlaag de modelhoogte of schakel \"Geen dunne lagen\" uit." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "is te dicht bij het uitsluitingsgebied, er botsingen optreden tijdens het printen." @@ -13881,6 +13931,10 @@ msgstr "3MF gebruiken in plaats van G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Schakel dit in als de printer een 3MF-bestand als printopdracht accepteert. Indien ingeschakeld verzendt Orca Slicer het geslicede bestand als een .gcode.3mf in plaats van als een gewoon .gcode-bestand." +# AI Translated +msgid "Printer Agent" +msgstr "Printeragent" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Selecteer de implementatie van de netwerkagent voor de communicatie met de printer." @@ -15045,6 +15099,10 @@ msgstr "Uitgelijnd Rechtlijnig" msgid "Concentric" msgstr "Concentrisch" +# AI Translated +msgid "Spiral Inset" +msgstr "Spiraalinzet" + # AI Translated msgid "Hilbert Curve" msgstr "Hilbertkromme" @@ -15142,12 +15200,12 @@ msgstr "Vulvolgorde bovenoppervlak" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Richting waarin bovenoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n" -"Naar buiten begint in het midden van het oppervlak, zodat overtollig materiaal naar de rand wordt geduwd, waar het het minst zichtbaar is. Naar binnen begint aan de rand en eindigt met de krappe bochten in het midden.\n" +"Richting waarin bovenvlakken worden gevuld bij een patroon dat vanuit het midden werkt (Concentrisch, Spiraalinzet, Archimedische koorden, Octagram Spiraal).\n" +"Naar buiten begint in het midden van het vlak, zodat overtollig materiaal naar de rand wordt geduwd, waar het het minst opvalt. Naar binnen begint aan de rand en eindigt met de krappe bochten in het midden.\n" "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen." # AI Translated @@ -15156,12 +15214,12 @@ msgstr "Vulvolgorde onderoppervlak" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Richting waarin onderoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n" -"Naar binnen begint elk oppervlak met de bredere buitenbochten, wat de hechting van de eerste laag verbetert op printbedden waar de krappe bochten in het midden mogelijk niet hechten. Naar buiten begint in het midden en duwt overtollig materiaal naar de rand.\n" +"Richting waarin ondervlakken worden gevuld bij een patroon dat vanuit het midden werkt (Concentrisch, Spiraalinzet, Archimedische koorden, Octagram Spiraal).\n" +"Naar binnen begint elk vlak met de bredere buitenste bochten, wat de hechting van de eerste laag verbetert op printbedden waar de krappe bochten in het midden mogelijk niet plakken. Naar buiten begint in het midden en duwt overtollig materiaal naar de rand.\n" "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen." msgid "Internal solid infill pattern" @@ -15279,6 +15337,14 @@ msgstr "Tegen de klok in" msgid "Clockwise" msgstr "Met de klok mee" +# AI Translated +msgid "Distance to rod" +msgstr "Afstand tot de stang" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Horizontale afstand van de punt van het mondstuk tot de verste rand van de stang. Wordt gebruikt om botsingen te vermijden bij printen op basis van object." + msgid "Height to rod" msgstr "Hoogte tot geleider" @@ -17735,6 +17801,20 @@ msgstr "Overhange wand detecteren" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Dit maakt het mogelijk om het overhangpercentage ten opzichte van de lijnbreedte te detecteren en gebruikt verschillende snelheden om af te drukken. Voor 100%% overhang wordt de brugsnelheid gebruikt." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Niet-ondersteunde wanden als laatste printen" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Wandlussen die volledig in de lucht liggen, worden pas geprint zodra iets ze kan dragen:\n" +"ze worden geëxtrudeerd na de andere wanden van hun eiland, de binnenste eerst, ongeacht de wandvolgorde.\n" +"Een lus die alleen de bruggen van deze laag kunnen verankeren, wacht tot die bruggen geprint zijn, terwijl een lus die langs een ondersteunde wand loopt zijn plek vóór de vulling behoudt, die hem als verankering nodig heeft." + # AI Translated msgid "Outer walls" msgstr "Buitenste wanden" @@ -18242,6 +18322,39 @@ msgstr "Vegen bij lussen" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Om de zichtbaarheid van de naad bij een gesloten lusextrusie te minimaliseren, wordt er een kleine beweging naar binnen uitgevoerd voordat de extruder de lus verlaat." +# AI Translated +msgid "Wipe inward" +msgstr "Naar binnen vegen" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Geldt alleen voor buitenwanden, inclusief gatcontouren. Beweegt het hete mondstuk tijdens het vegen naar reeds geprinte binnenwanden, om het opnieuw opwarmen van vers geprint plastic en naadsporen te beperken.\n" +"\n" +"Vooral nuttig bij laaghoogtes onder 0,1 mm, waar veegsporen beter zichtbaar zijn.\n" +"\n" +"Gebruikt het gewone vegen als er nog geen aangrenzende binnenwand geprint is (gebieden met één wand of de wandvolgorde Buiten/Binnen), of als er geen ondersteund pad naar binnen gevonden kan worden, bijvoorbeeld bij krappe hoeken of onderbrekingen in de naad." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Afstand voor naar binnen vegen" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"De afstand waarover het veegpad van de buitenste omtrek af wordt verschoven, opgegeven in millimeters of als percentage van de werkelijke extrusiebreedte van de buitenwand.\n" +"\n" +"Bijvoorbeeld: 50% verschuift het pad over de helft van de breedte van de buitenwand. De effectieve verschuiving wordt begrensd door zowel de werkelijke breedte van de buitenwand als de beschikbare ruimte tot de aangrenzende wand, dus waarden boven 100% of een gelijkwaardige absolute afstand hebben geen extra effect. Stel in op 0 om de verschuiving uit te schakelen." + # AI Translated msgid "Wipe before external loop" msgstr "Vegen vóór de externe lus" @@ -18549,8 +18662,9 @@ msgstr "Pakt het nieuwe gereedschap op zonder te wachten tot het de printtempera msgid "No sparse layers (beta)" msgstr "Geen dunne lagen (bèta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele botsingen met de print." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Indien ingeschakeld wordt het afveegblok niet geprint op lagen zonder gereedschapswissels. Op lagen met een gereedschapswissel beweegt de extruder omlaag om het afveegblok te printen, zodat het blok onder het model uitkomt en de printkop ernaartoe omlaag moet reiken. Opstellingen waarbij dat zou botsen met een al geprint voorwerp worden afgewezen. Heeft geen effect bij vloeiende timelapse of klontdetectie, die op elke laag een blok nodig hebben." msgid "Prime all printing extruders" msgstr "Veeg alle printextruders af" @@ -18576,6 +18690,34 @@ msgstr "" msgid "Cyclic" msgstr "Cyclisch" +# AI Translated +msgid "Cyclic order" +msgstr "Cyclische volgorde" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Aangepaste filamentvolgorde die door de cyclische gereedschapswisselvolgorde wordt gebruikt, als filamentnummers gescheiden door komma's (bijv. \"3,2,1,4\").\n" +"Elke laag print zijn filamenten volgens deze volgorde; niet vermelde filamenten worden als laatste geprint, in oplopende volgorde.\n" +"Laat leeg om de filamenten in oplopende volgorde te doorlopen." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Cyclische volgorde toepassen op de eerste laag" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Past de cyclische gereedschapswisselvolgorde ook toe op de eerste laag.\n" +"Standaard staat dit uit, omdat de eerste laag juist wordt geordend voor de beste printbed hechting: filamenten die kleine, kwetsbare details van de eerste laag printen, worden als laatste geprint, zodat de daaropvolgende gereedschapswissels en verplaatsingen die zwak verankerde delen minder snel losstoten. Deze volgorde van de eerste laag houdt ook rekening met een aangepaste filamentvolgorde voor de eerste laag, als die is ingesteld. Het voordeel van de cyclische volgorde (extra gereedschapswissels geven elke laag meer tijd om af te koelen) geldt niet voor de eerste laag, die langzaam en heet wordt geprint voor de hechting.\n" +"Schakel dit alleen in als je op elke laag, inclusief de eerste, exact dezelfde gereedschapsvolgorde nodig hebt, ten koste van die hechtingsoptimalisatie." + msgid "Slice gap closing radius" msgstr "Sluitingsradius van de gap" @@ -18585,9 +18727,6 @@ msgstr "Scheuren kleiner dan 2x de sluitradius van de spleet worden opgevuld tij msgid "Slicing Mode" msgstr "Slicing-modus" -msgid "Other" -msgstr "Anders" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Gebruik „Even-Oneven” voor 3DLabPrint-vliegtuigmodellen. Gebruik „Gaten sluiten” om alle gaten in het model te sluiten." @@ -19684,6 +19823,14 @@ msgstr "Geen controle" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Voer geen geldigheidscontroles uit, zoals de controle op conflicten tussen G-code-paden." +# AI Translated +msgid "Strict mode" +msgstr "Strikte modus" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Sluit af met een andere waarde dan nul wanneer het slicen een niet-kritieke waarschuwing oplevert die anders alleen gelogd wordt, zoals een model dat ondersteuning nodig heeft terwijl ondersteuning uitstaat. Gebruik dit in CI of in geautomatiseerde pipelines die nooit een subtiel kapotte slice mogen opleveren. Elke zo'n waarschuwing staat ook met een stabiele klasse in de array `warnings` van result.json, die alleen op Linux wordt geschreven. Kan niet worden gecombineerd met --no-check, dat de ondersteuningscontrole overslaat." + # AI Translated msgid "Normative check" msgstr "Normatieve controle" @@ -19698,11 +19845,28 @@ msgstr "Model informatie weergeven" msgid "This outputs the model’s information." msgstr "Dit geeft de informatie van het model weer." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Mesh inspecteren (JSON naar stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Print een JSON-samenvatting van elk geladen voorwerp naar stdout en sluit dan af: de begrenzingskaders en de vlakken van de convexe omhulling waarop het kan rusten, met hun normalen, oppervlakten en middelpunten. Dit zijn de vlakken waaruit de opties --ground-* kiezen. Machineleesbaar alternatief voor --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Beschildering inspecteren (JSON naar stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Print een gestructureerde JSON-samenvatting van elke beschilderde laag (ondersteuning, naad, MMU-kleur, vage buitenkant) die al op het geladen model is opgeslagen — aantal facetten, oppervlakte en mesh-lokaal begrenzingskader per toestand — en sluit dan af. Machineleesbaar alternatief voor het openen van de schildergizmo's in de interface." + msgid "Export Settings" msgstr "Exporteer instellingen" -msgid "This exports settings to a file." -msgstr "Exporteer instellingen naar een bestand" +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Dit exporteert instellingen naar een bestand. Gebruik - om ze naar stdout te schrijven." msgid "Send progress to pipe" msgstr "Stuur voortgang naar pipe" @@ -19761,6 +19925,30 @@ msgstr "Draai over de Y-as" msgid "Rotation angle around the Y axis in degrees." msgstr "Rotatiehoek rond de Y-as in graden." +# AI Translated +msgid "Ground largest face" +msgstr "Op grootste vlak leggen" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Legt elk voorwerp op het grootste vlak van zijn convexe omhulling en laat het op het printbed zakken. Van even grote vlakken blijft het vlak dat al omlaag wijst behouden. Voorwerpen zonder een vlak dat groot genoeg is om op te rusten, blijven zoals ze zijn. Transformaties worden uitgevoerd in de volgorde van de opdrachtregel, dus rotaties die vóór deze optie zijn opgegeven worden gerespecteerd. --orient 1 draait na alle transformaties en vervangt de oriëntatie." + +# AI Translated +msgid "Ground face by normal" +msgstr "Op vlak volgens normaal leggen" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Legt elk voorwerp op het vlak van de convexe omhulling waarvan de naar buiten gerichte normaal het dichtst bij de richting NX,NY,NZ ligt, en laat het op het printbed zakken. De richting is in voorwerpcoördinaten, die de vóór deze optie opgegeven rotaties bevatten en overeenkomen met de assen van het printbed, tenzij het invoerbestand het voorwerp draait. Bijvoorbeeld: 1,0,0 zet het voorwerp op zijn +X-zijde. --orient 1 draait na alle transformaties en vervangt de oriëntatie." + +# AI Translated +msgid "Ground face at point" +msgstr "Op vlak bij punt leggen" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Legt elk voorwerp op het vlak van de convexe omhulling dat het punt X,Y,Z bevat, en laat het op het printbed zakken. Het punt is in voorwerpcoördinaten, die de vóór deze optie opgegeven rotaties bevatten; --inspect-mesh geeft de middelpunten van vlakken in die coördinaten. Voorwerpen zonder zo'n vlak blijven zoals ze zijn, en de uitvoering mislukt als geen enkel voorwerp er een heeft. --orient 1 draait na alle transformaties en vervangt de oriëntatie." + msgid "Scale the model by a float factor." msgstr "Schaal het model met een float-factor" @@ -23315,14 +23503,17 @@ msgstr "Deze actie kan niet ongedaan worden gemaakt. Doorgaan?" msgid "Skipping objects." msgstr "Objecten worden overgeslagen." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Materiaalverhouding" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Modelhoogte" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Verhouding" msgid "Select Filament" msgstr "Selecteer filament" @@ -23632,12 +23823,14 @@ msgid "Drying-Dehumidifying" msgstr "Drogen - ontvochtigen" # AI Translated -msgid " maximum drying temperature is " -msgstr " de maximale droogtemperatuur is " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "De maximale droogtemperatuur van %s is %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " de minimale droogtemperatuur is " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "De minimale droogtemperatuur van %s is %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -24088,6 +24281,103 @@ msgstr "" "Kromtrekken voorkomen\n" "Wist je dat bij het printen van materialen die gevoelig zijn voor kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het warmtebed de kans op kromtrekken kan verkleinen?" +#~ msgid "Other" +#~ msgstr "Anders" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Links: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Rechts: " + +# AI Translated +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "De maximumtemperatuur mag niet hoger zijn dan " + +# AI Translated +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "De minimumtemperatuur mag niet lager zijn dan " + +#~ msgid "up to" +#~ msgstr "tot" + +#~ msgid "above" +#~ msgstr "Boven" + +#~ msgid "from" +#~ msgstr "Van" + +# AI Translated +#~ msgid "Configuration package: " +#~ msgstr "Configuratiepakket: " + +# AI Translated +#~ msgid " updated to " +#~ msgstr " bijgewerkt naar " + +# AI Translated +#~ msgid "Grouping error: " +#~ msgstr "Groeperingsfout: " + +# AI Translated +#~ msgid " can not be placed in the " +#~ msgstr " kan niet worden geplaatst in de " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " de maximale droogtemperatuur is " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " de minimale droogtemperatuur is " + +# AI Translated +#~ msgid "needs" +#~ msgstr "heeft nodig" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "niet ingeschakeld" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "materiaal niet gepubliceerd" + +#~ msgid "Select the language" +#~ msgstr "Kies de taal" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Plug-in selecteren" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Richting waarin bovenoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n" +#~ "Naar buiten begint in het midden van het oppervlak, zodat overtollig materiaal naar de rand wordt geduwd, waar het het minst zichtbaar is. Naar binnen begint aan de rand en eindigt met de krappe bochten in het midden.\n" +#~ "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Richting waarin onderoppervlakken worden gevuld bij gebruik van een patroon dat vanuit het midden werkt (Concentrisch, Archimedische koorden, Octagramspiraal).\n" +#~ "Naar binnen begint elk oppervlak met de bredere buitenbochten, wat de hechting van de eerste laag verbetert op printbedden waar de krappe bochten in het midden mogelijk niet hechten. Naar buiten begint in het midden en duwt overtollig materiaal naar de rand.\n" +#~ "Standaard gebruikt de volgorde van het kortste pad, die beide kanten op kan lopen." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Het afveegblok wordt niet geprint bij lagen zonder toolwisselingen als dit is ingeschakeld. Op lagen met een toolwissel zal de extruder neerwaarts bewegen naar het afveegblok. De gebruiker is verantwoordelijk voor eventuele botsingen met de print." + +#~ msgid "This exports settings to a file." +#~ msgstr "Exporteer instellingen naar een bestand" + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Voor de native Wayland-liveview is de GStreamer GTK-videosink nodig. Installeer de gtksink-plug-in voor GStreamer en start OrcaSlicer opnieuw." diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index 39b0c71d89..8f66233eb3 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer 2.3.0-rc\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: \n" "Last-Translator: Krzysztof Morga <>\n" "Language-Team: \n" @@ -2512,13 +2512,6 @@ msgstr "Dostępna jest aktualizacja. Otwórz okno pakietu profili, aby ją zains msgid "%s has been removed." msgstr "%s został usunięty." - -msgid "Select the language" -msgstr "Wybierz język" - -msgid "Language" -msgstr "Język" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3789,11 +3782,15 @@ msgstr "Wycofaj bieżący filament na Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Przełącz tor na Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "Maksymalna temperatura nie może przekroczyć " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Maksymalna temperatura nie może przekroczyć %d" -msgid "The minmum temperature should not be less than " -msgstr "Minimalna temperatura nie powinna być mniejsza niż " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Minimalna temperatura nie powinna być mniejsza niż %d" # AI Translated msgid "Type to filter..." @@ -4702,6 +4699,15 @@ msgstr "" "Kopiowanie tymczasowego G-code do wyjściowego pliku G-code nie powiodło się. Być może karta SD jest zablokowana do zapisu?\n" "Komunikat błędu: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Skopiowanie tymczasowego G-code do wyjściowego G-code nie powiodło się.\n" +"Komunikat błędu: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Kopiowanie tymczasowego G-code do wyjściowego pliku G-code nie powiodło się. Może być problem z urządzeniem docelowym, spróbuj ponownie wyeksportować lub użyć innego urządzenia. Uszkodzony plik wyjściowego G-code znajduje się w pliku %1%.tmp." @@ -5451,10 +5457,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Wartość %s jest spoza zakresu. Poprawny zakres wynosi od %d do %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Czy to %s%% czy %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Czy to %s%% czy %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5482,22 +5489,18 @@ msgstr "Nieprawidłowy format. Oczekiwano formatu wektorowego: „%1%”" msgid "System agents" msgstr "Agenci systemowi" -# AI Translated -msgid "No plugin selected" -msgstr "Nie wybrano wtyczki" - # AI Translated msgid "Add plugin" msgstr "Dodaj wtyczkę" -# AI Translated -msgid "Select plugin" -msgstr "Wybierz wtyczkę" - # AI Translated msgid "Remove plugin" msgstr "Usuń wtyczkę" +# AI Translated +msgid "No plugin selected" +msgstr "Nie wybrano wtyczki" + # AI Translated msgid "Configure" msgstr "Konfiguruj" @@ -5761,14 +5764,20 @@ msgstr "Ustaw na optymalne" msgid "Regroup filament" msgstr "Zmień grupowanie filamentu" -msgid "up to" -msgstr "do" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "do %1% mm" -msgid "above" -msgstr "powyżej" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "powyżej %1% mm" -msgid "from" -msgstr "od" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "od %1% do %2% mm" # AI Translated msgid "Usage" @@ -6143,7 +6152,7 @@ msgstr "Objętość:" msgid "Size:" msgstr "Rozmiar:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Wykryto konflikty ścieżek G-code na warstwie %d, Z = %.2lfmm. Proszę oddalić od siebie obiekty będące w konflikcie (%s <-> %s)." @@ -6463,11 +6472,13 @@ msgstr "Zapisz projekt jako" msgid "Save current project as" msgstr "Zapisz bieżący projekt jako" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Opublikuj 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Eksportuj plik 3MF z osadzonymi wybranymi ustawieniami" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importuj 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7779,6 +7790,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Dół" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "To ustawienie nie określa typu funkcji wtyczki." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "To ustawienie określa nierozpoznany typ funkcji wtyczki: " + # AI Translated msgid "Plugin Selection" msgstr "Wybór wtyczek" @@ -8353,11 +8372,13 @@ msgstr "Proszę potwierdź, że G-code w tych profilach jest bezpieczny, aby zap msgid "Customized Preset" msgstr "Dostosowany profil" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Niektórych opublikowanych ustawień nie udało się zastosować:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Niektóre gniazda filamentu zostały zmienione:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Nazwa komponentów w pliku step nie jest w formacie UTF-8!" @@ -8785,13 +8806,17 @@ msgstr "Zapisz plik po wykonaniu cięcia jako:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Plik %s został wysłany do pamięci drukarki i można go obejrzeć na urządzeniu." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Opublikuj plik 3MF jako:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Nie udało się wyeksportować opublikowanego pliku 3MF.\n" +"Sprawdź, czy folder istnieje w trybie online lub czy inne programy nie mają otwartego tego pliku." msgid "Publish" msgstr "Opublikuj" @@ -9010,7 +9035,6 @@ msgstr "Czy kontynuować?" msgid "Language selection" msgstr "Wybór języka" - msgid "Asia-Pacific" msgstr "Azja i Pacyfik" @@ -9124,6 +9148,9 @@ msgstr "Aktualna ścieżka instancji: " msgid "General" msgstr "Ogólne" +msgid "Language" +msgstr "Język" + msgid "Metric" msgstr "Metryczne" @@ -9618,9 +9645,6 @@ msgstr "Podczas przewijania suwaka warstw w podglądzie po cięciu renderuj wars msgid "Dimmed layer brightness" msgstr "Jasność przyciemnionych warstw" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -10052,63 +10076,80 @@ msgstr "Przesyłanie danych" msgid "Jump to webpage" msgstr "Przejdź na stronę" +# AI Translated msgid "Material" -msgstr "" +msgstr "Materiał" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filament mieszany" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Niektóre filamenty mieszane zależą od filamentów, które nie zostaną opublikowane:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (mieszany)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% wymaga %2%, który nie jest włączony." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% wymaga %2%, którego materiał nie zostanie opublikowany." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Aby opublikować filament mieszany, włącz każdy filament, którego używa, i wybierz Pełną publikację lub spełnij jego wymaganie Rodzaju." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Opublikuj mimo to" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Opublikuj 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Wybierz, które ustawienia zostaną opublikowane w pliku 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki publikowania 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Poradnik wideo publikowania 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filament mieszany - publikowany w całości, gdy powyżej zaznaczono \"Włącz\"" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Opublikuj ten filament mieszany oraz włącz + opublikuj w całości jego filamenty składowe" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Opublikuj to gniazdo filamentu w pliku 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Pełna publikacja" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Osadź cały filament z tego gniazda w pliku 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtruj niezaznaczone" #, c-format, boost-format msgid "Save %s as" @@ -10128,6 +10169,10 @@ msgstr "Kopiuje do tego profilu wszystkie wartości odziedziczone z profilu nadr msgid "Detach from parent" msgstr "Odłącz od elementu nadrzędnego" +# AI Translated +msgid "Save without parent" +msgstr "Zapisz bez elementu nadrzędnego" + # AI Translated msgid "Unique preset" msgstr "Profil niezależny" @@ -10851,9 +10896,17 @@ msgstr "Wykrywanie zlepiania wymaga wieży czyszczącej. Bez wieży czyszczącej msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Jednoczesne włączenie precyzyjnej wysokości Z i wieży czyszczącej może powodować błędy cięcia. Czy nadal chcesz włączyć precyzyjną wysokość Z?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Płynny timelapse wymaga wieży czyszczącej na każdej warstwie, co nie jest zgodne z opcją \"Warstwy bez czyszczenia\". Opcja \"Warstwy bez czyszczenia\" została wyłączona." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Wieża czyszcząca jest wymagana dla płynnego timelapse. Możliwe są wady na modelu bez wieży czyszczącej. Czy włączyć wieżę czyszczącą?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "Opcja \"Warstwy bez czyszczenia\" nie jest zgodna z płynnym timelapse, który wymaga wieży czyszczącej na każdej warstwie. Timelapse został przełączony w tryb tradycyjny." + msgid "Still print by object?" msgstr "Czy nadal drukować według obiektu?" @@ -11238,10 +11291,6 @@ msgstr "Kompatybilne profile procesów" msgid "Printable space" msgstr "Przestrzeń do druku" -# AI Translated -msgid "Printer Agent" -msgstr "Agent drukarki" - # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Wybierz implementację agenta sieciowego do komunikacji z drukarką. Dostępni agenci są rejestrowani przy uruchamianiu." @@ -11670,14 +11719,6 @@ msgstr "Liczba ekstruderów" msgid "Capabilities" msgstr "Możliwości" -# AI Translated -msgid "Left: " -msgstr "Lewy: " - -# AI Translated -msgid "Right: " -msgstr "Prawy: " - msgid "Show all presets (including incompatible)" msgstr "Pokaż wszystkie profile (łącznie z niekompatybilnymi)" @@ -12536,15 +12577,22 @@ msgstr "Naprawa anulowana" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Nie udało się skopiować pliku %1% do %2%: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Pobieranie nowych profili producentów: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Pakiet konfiguracyjny: %1% zaktualizowany do %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Nie udało się pobrać profili producentów: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Należy sprawdzić niezapisane zmiany przed aktualizacją konfiguracji." -msgid "Configuration package: " -msgstr "Pakiet konfiguracyjny:" - -msgid " updated to " -msgstr " aktualizacja do " - msgid "Open G-code file:" msgstr "Otwórz plik G-code:" @@ -12608,11 +12656,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping jest obsługiwany tylko przez Klipper, RepRapFirmware i Marlin 2." -msgid "Grouping error: " -msgstr "Błąd grupowania: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Błąd grupowania: %1% nie może zostać umieszczony w lewej dyszy" -msgid " can not be placed in the " -msgstr " nie może być umieszczony w " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Błąd grupowania: %1% nie może zostać umieszczony w prawej dyszy" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12727,6 +12779,10 @@ msgstr "%1% jest zbyt blisko innych, mogą wystąpić kolizje." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% jest zbyt wysoki, mogą wystąpić kolizje." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Wzajemne położenie modelu i wieży czyszczącej nie spełnia wymagań funkcji \"Warstwy bez czyszczenia\". Zmień ich wzajemne położenie, zmniejsz wysokość modelu albo wyłącz opcję \"Warstwy bez czyszczenia\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " jest zbyt blisko obszaru wykluczenia, mogą wystąpić kolizje podczas drukowania." @@ -13099,6 +13155,10 @@ msgstr "Użyj 3MF zamiast G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Włącz tę opcję, jeśli drukarka przyjmuje plik 3MF jako zadanie druku. Po włączeniu Orca Slicer wysyła plik po cięciu jako .gcode.3mf zamiast zwykłego pliku .gcode." +# AI Translated +msgid "Printer Agent" +msgstr "Agent drukarki" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Wybierz implementację agenta sieciowego do komunikacji z drukarką." @@ -14202,6 +14262,10 @@ msgstr "Wyrównany prostoliniowy" msgid "Concentric" msgstr "Koncentryczny" +# AI Translated +msgid "Spiral Inset" +msgstr "Spirala do wewnątrz" + msgid "Hilbert Curve" msgstr "Krzywa Hilberta" @@ -14295,13 +14359,13 @@ msgstr "Kolejność wypełniania górnej powierzchni" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Kierunek wypełniania górnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n" +"Kierunek wypełniania górnych powierzchni przy wzorze rozchodzącym się od środka (Koncentryczny, Spirala do wewnątrz, Struny Archimedesa, Spirala oktagramu).\n" "Na zewnątrz zaczyna od środka powierzchni, dzięki czemu nadmiar materiału jest wypychany ku krawędzi, gdzie jest najmniej widoczny. Do wewnątrz zaczyna od krawędzi i kończy ciasnymi łukami na środku.\n" -"Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku." +"Domyślny używa kolejności najkrótszej ścieżki, która może przebiegać w dowolnym kierunku." # AI Translated msgid "Bottom surface fill order" @@ -14309,13 +14373,13 @@ msgstr "Kolejność wypełniania dolnej powierzchni" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Kierunek wypełniania dolnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n" -"Do wewnątrz rozpoczyna każdą powierzchnię od szerszych łuków zewnętrznych, co poprawia przyczepność pierwszej warstwy na stołach, do których ciasne łuki na środku mogą nie przylegać. Na zewnątrz zaczyna od środka, wypychając nadmiar materiału ku krawędzi.\n" -"Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku." +"Kierunek wypełniania dolnych powierzchni przy wzorze rozchodzącym się od środka (Koncentryczny, Spirala do wewnątrz, Struny Archimedesa, Spirala oktagramu).\n" +"Do wewnątrz zaczyna każdą powierzchnię od szerszych łuków zewnętrznych, co poprawia przyczepność pierwszej warstwy na stołach, na których ciasne łuki na środku mogą się nie przykleić. Na zewnątrz zaczyna od środka i wypycha nadmiar materiału ku krawędzi.\n" +"Domyślny używa kolejności najkrótszej ścieżki, która może przebiegać w dowolnym kierunku." msgid "Internal solid infill pattern" msgstr "Wzór wewnętrznego pełnego wypełnienia" @@ -14418,6 +14482,14 @@ msgstr "Przeciwnie" msgid "Clockwise" msgstr "Zgodnie" +# AI Translated +msgid "Distance to rod" +msgstr "Odległość do pręta" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Odległość pozioma czubka dyszy od dalszej krawędzi pręta. Używana do unikania kolizji przy druku wg obiektu." + msgid "Height to rod" msgstr "Odległość od prowadnicy" @@ -16670,6 +16742,20 @@ msgstr "Wykrywanie ścian nawisu" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Określ procentowy udział nawisów w stosunku do szerokości ekstruzji i użyj różnych prędkości do druku. Dla 100%% nawisów, zostanie użyta prędkość mostu." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Drukuj niepodparte ściany na końcu" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Pętle ścian leżące w całości w powietrzu są drukowane dopiero wtedy, gdy coś może je utrzymać:\n" +"są wytłaczane po pozostałych ścianach swojej wyspy, począwszy od najbardziej wewnętrznej, niezależnie od kolejności ścian.\n" +"Pętla, którą mogą zakotwiczyć tylko mosty tej warstwy, czeka na wydrukowanie tych mostów, natomiast pętla biegnąca wzdłuż podpartej ściany zachowuje swoje miejsce przed wypełnieniem, które potrzebuje jej jako zakotwiczenia." + # AI Translated msgid "Outer walls" msgstr "Ściany zewnętrzne" @@ -17120,6 +17206,39 @@ msgstr "Czyszczenie na pętlach" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Aby zminimalizować widoczność szwu w ekstruzji zamkniętej pętli, przed opuszczeniem pętli przez extruder wykonuje się mały ruch do wewnątrz." +# AI Translated +msgid "Wipe inward" +msgstr "Wycieranie do wewnątrz" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Dotyczy wyłącznie ścian zewnętrznych, w tym obrysów otworów. Podczas wycierania przesuwa gorącą dyszę w stronę wydrukowanych już ścian wewnętrznych, aby ograniczyć ponowne nagrzewanie świeżo wydrukowanego tworzywa i ślady szwu.\n" +"\n" +"Szczególnie przydatne przy wysokościach warstwy poniżej 0,1 mm, gdzie ślady wycierania są bardziej widoczne.\n" +"\n" +"Używa zwykłego wycierania, jeśli żadna sąsiednia ściana wewnętrzna nie została jeszcze wydrukowana (obszary o pojedynczej ścianie lub kolejność ścian Zewnętrzna/wewnętrzna) albo jeśli nie można znaleźć podpartej ścieżki do wewnątrz, na przykład w ciasnych narożnikach lub przerwach szwu." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Odległość wycierania do wewnątrz" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Odległość, o jaką ścieżka wycierania zostaje przesunięta od zewnętrznego obrysu, podana w milimetrach lub jako procent rzeczywistej szerokości ekstruzji zewnętrznej ściany.\n" +"\n" +"Na przykład 50% przesuwa ścieżkę o połowę szerokości zewnętrznej ściany. Skuteczne przesunięcie jest ograniczone zarówno rzeczywistą szerokością zewnętrznej ściany, jak i dostępnym odstępem do sąsiedniej ściany, więc wartości powyżej 100% lub równoważna odległość bezwzględna nie dają dodatkowego efektu. Ustaw 0, aby wyłączyć przesunięcie." + msgid "Wipe before external loop" msgstr "Wycieranie przed zewnętrzną pętlą" @@ -17396,8 +17515,9 @@ msgstr "Pobiera nowe narzędzie bez czekania, aż osiągnie temperaturę druku, msgid "No sparse layers (beta)" msgstr "Warstwy bez czyszczenia (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Jeśli włączone to wieża czyszcząca nie będzie drukowana na warstwach, na których nie ma zmian koloru. Na kolejnych warstwach ze zmianami koloru ekstruder zjedzie w dół, aby kontynuować czyszczenie na wieży. Pamiętaj, że to użytkownik musi upewnić się, że nie dojdzie do kolizji głowicy z wydrukiem." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Jeśli opcja jest włączona, wieża czyszcząca nie będzie drukowana na warstwach bez zmian narzędzia. Na warstwach ze zmianą narzędzia ekstruder zjedzie w dół, aby wydrukować wieżę czyszczącą, przez co wieża znajdzie się poniżej modelu, a głowica musi po nią sięgnąć w dół. Układy, w których doszłoby przy tym do kolizji z już wydrukowanym obiektem, są odrzucane. Nie działa przy płynnym timelapse ani przy wykrywaniu nalotu na dyszy, które wymagają wieży na każdej warstwie." msgid "Prime all printing extruders" msgstr "Wyczyść wszystkie używane ekstrudery" @@ -17423,6 +17543,34 @@ msgstr "" msgid "Cyclic" msgstr "Cykliczna" +# AI Translated +msgid "Cyclic order" +msgstr "Kolejność cykliczna" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Własna sekwencja filamentów używana przez cykliczną kolejność zmian narzędzia, jako numery filamentów oddzielone przecinkami (np. \"3,2,1,4\").\n" +"Każda warstwa drukuje swoje filamenty zgodnie z tą sekwencją; filamenty niewymienione są drukowane na końcu, w kolejności rosnącej.\n" +"Pozostaw puste, aby przechodzić przez filamenty w kolejności rosnącej." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Zastosuj kolejność cykliczną do pierwszej warstwy" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Stosuje cykliczną kolejność zmian narzędzia również do pierwszej warstwy.\n" +"Domyślnie jest to wyłączone, ponieważ pierwsza warstwa jest zamiast tego układana pod kątem najlepszej przyczepności do podłoża: filamenty drukujące małe, delikatne elementy pierwszej warstwy są drukowane na końcu, dzięki czemu kolejne zmiany narzędzia i przemieszczenia rzadziej odrywają te słabo zakotwiczone fragmenty. Ta kolejność pierwszej warstwy uwzględnia też własną sekwencję filamentów dla pierwszej warstwy, jeśli została ustawiona. Korzyść z kolejności cyklicznej (dodatkowe zmiany narzędzia dają każdej warstwie więcej czasu na ostygnięcie) nie dotyczy pierwszej warstwy, która jest drukowana wolno i gorąco dla przyczepności.\n" +"Włącz tę opcję tylko wtedy, gdy potrzebujesz dokładnie tej samej sekwencji narzędzi na każdej warstwie, łącznie z pierwszą, kosztem tej optymalizacji przyczepności." + msgid "Slice gap closing radius" msgstr "Promień zamykania szpar" @@ -17432,9 +17580,6 @@ msgstr "Szpary mniejsze niż dwukrotność wartości parametru „promień zamyk msgid "Slicing Mode" msgstr "Tryb cięcia" -msgid "Other" -msgstr "Inne" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Użyj „Parzysto-nieparzysty” dla modeli samolotów 3DLabPrint. Użyj „Zamknij otwory” do zamknięcia wszystkich otworów w modelu." @@ -18458,6 +18603,14 @@ msgstr "Brak sprawdzania" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Nie uruchamiaj żadnych testów poprawności, takich jak sprawdzanie konfliktów ścieżek G-code." +# AI Translated +msgid "Strict mode" +msgstr "Tryb ścisły" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Kończy działanie z kodem różnym od zera, gdy cięcie zgłosi niekrytyczne ostrzeżenie, które w przeciwnym razie trafiłoby tylko do dziennika, na przykład model wymagający podpór przy wyłączonych podporach. Używaj tego w CI lub w zautomatyzowanych procesach, które nigdy nie powinny wypuścić subtelnie wadliwego cięcia. Każde takie ostrzeżenie jest też wymienione ze stabilną klasą w tablicy `warnings` pliku result.json, zapisywanego wyłącznie w systemie Linux. Nie można łączyć z --no-check, które pomija kontrolę podpór." + msgid "Normative check" msgstr "Kontrola normatywna" @@ -18470,11 +18623,28 @@ msgstr "Informacje o modelu wyjściowym" msgid "This outputs the model’s information." msgstr "Wyświetl informacje o modelu." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Sprawdź siatkę (JSON na stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Wypisuje na stdout podsumowanie JSON każdego wczytanego obiektu, a następnie kończy działanie: jego prostopadłościany otaczające oraz ściany otoczki wypukłej, na których może spoczywać, wraz z ich normalnymi, polami i środkami. To właśnie spośród tych ścian wybierają opcje --ground-*. Czytelna maszynowo alternatywa dla --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Sprawdź malowanie (JSON na stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Wypisuje ustrukturyzowane podsumowanie JSON każdej malowanej warstwy (podpory, szew, kolor MMU, skóra fuzzy) już zapisanej we wczytanym modelu — liczba ścianek, pole powierzchni i prostopadłościan otaczający w układzie siatki dla każdego stanu — a następnie kończy działanie. Czytelna maszynowo alternatywa dla otwierania narzędzi malowania w interfejsie." + msgid "Export Settings" msgstr "Ustawienia eksportu" -msgid "This exports settings to a file." -msgstr "Eksportuj ustawienia do pliku." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "To eksportuje ustawienia do pliku. Użyj -, aby zapisać je na stdout." msgid "Send progress to pipe" msgstr "Wyślij postęp do rury" @@ -18530,6 +18700,30 @@ msgstr "Obróć wokół osi Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Kąt obrotu wokół osi Y w stopniach." +# AI Translated +msgid "Ground largest face" +msgstr "Oprzyj na największej ścianie" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Kładzie każdy obiekt na największej ścianie jego otoczki wypukłej i opuszcza go na stół. Spośród ścian o równej wielkości zachowywana jest ta, która już jest skierowana w dół. Obiekty bez ściany wystarczająco dużej, by na niej spocząć, pozostają bez zmian. Przekształcenia wykonywane są w kolejności z wiersza poleceń, więc obroty podane przed tą opcją są respektowane. --orient 1 działa po wszystkich przekształceniach i zastępuje orientację." + +# AI Translated +msgid "Ground face by normal" +msgstr "Oprzyj na ścianie wg normalnej" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Kładzie każdy obiekt na tej ścianie otoczki wypukłej, której normalna zewnętrzna jest najbliższa kierunkowi NX,NY,NZ, i opuszcza go na stół. Kierunek podawany jest we współrzędnych obiektu, które uwzględniają obroty podane przed tą opcją i pokrywają się z osiami stołu, o ile plik wejściowy nie obraca obiektu. Na przykład 1,0,0 stawia obiekt na jego stronie +X. --orient 1 działa po wszystkich przekształceniach i zastępuje orientację." + +# AI Translated +msgid "Ground face at point" +msgstr "Oprzyj na ścianie w punkcie" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Kładzie każdy obiekt na tej ścianie otoczki wypukłej, która zawiera punkt X,Y,Z, i opuszcza go na stół. Punkt podawany jest we współrzędnych obiektu, które uwzględniają obroty podane przed tą opcją; --inspect-mesh podaje środki ścian w tych współrzędnych. Obiekty bez takiej ściany pozostają bez zmian, a przebieg kończy się niepowodzeniem, jeśli żaden obiekt jej nie ma. --orient 1 działa po wszystkich przekształceniach i zastępuje orientację." + msgid "Scale the model by a float factor." msgstr "Skaluj model przez czynnik zmiennoprzecinkowy" @@ -21793,14 +21987,17 @@ msgstr "Tego działania nie będzie można cofnąć. Kontynuować?" msgid "Skipping objects." msgstr "Pomijanie obiektów." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Udział materiału" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Wysokość modelu" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Udział" msgid "Select Filament" msgstr "Wybierz filament" @@ -22094,12 +22291,14 @@ msgid "Drying-Dehumidifying" msgstr "Suszenie — osuszanie" # AI Translated -msgid " maximum drying temperature is " -msgstr " maksymalna temperatura suszenia to " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Maksymalna temperatura suszenia dla %s to %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " minimalna temperatura suszenia to " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Minimalna temperatura suszenia dla %s to %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -22545,6 +22744,97 @@ msgstr "" "Unikaj odkształceń\n" "Czy wiesz, że podczas drukowania filamentami podatnymi na odkształcenia, takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może zmniejszyć prawdopodobieństwo odkształceń?" +#~ msgid "Other" +#~ msgstr "Inne" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Lewy: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Prawy: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Maksymalna temperatura nie może przekroczyć " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Minimalna temperatura nie powinna być mniejsza niż " + +#~ msgid "up to" +#~ msgstr "do" + +#~ msgid "above" +#~ msgstr "powyżej" + +#~ msgid "from" +#~ msgstr "od" + +#~ msgid "Configuration package: " +#~ msgstr "Pakiet konfiguracyjny:" + +#~ msgid " updated to " +#~ msgstr " aktualizacja do " + +#~ msgid "Grouping error: " +#~ msgstr "Błąd grupowania: " + +#~ msgid " can not be placed in the " +#~ msgstr " nie może być umieszczony w " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " maksymalna temperatura suszenia to " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " minimalna temperatura suszenia to " + +# AI Translated +#~ msgid "needs" +#~ msgstr "wymaga" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "nie włączony" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "materiał nieopublikowany" + +#~ msgid "Select the language" +#~ msgstr "Wybierz język" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Wybierz wtyczkę" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Kierunek wypełniania górnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n" +#~ "Na zewnątrz zaczyna od środka powierzchni, dzięki czemu nadmiar materiału jest wypychany ku krawędzi, gdzie jest najmniej widoczny. Do wewnątrz zaczyna od krawędzi i kończy ciasnymi łukami na środku.\n" +#~ "Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Kierunek wypełniania dolnych powierzchni przy użyciu wzoru opartego na środku (Koncentryczny, Cięciwy Archimedesa, Spirala Octagram).\n" +#~ "Do wewnątrz rozpoczyna każdą powierzchnię od szerszych łuków zewnętrznych, co poprawia przyczepność pierwszej warstwy na stołach, do których ciasne łuki na środku mogą nie przylegać. Na zewnątrz zaczyna od środka, wypychając nadmiar materiału ku krawędzi.\n" +#~ "Domyślnie używana jest kolejność najkrótszej ścieżki, która może przebiegać w dowolnym kierunku." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Jeśli włączone to wieża czyszcząca nie będzie drukowana na warstwach, na których nie ma zmian koloru. Na kolejnych warstwach ze zmianami koloru ekstruder zjedzie w dół, aby kontynuować czyszczenie na wieży. Pamiętaj, że to użytkownik musi upewnić się, że nie dojdzie do kolizji głowicy z wydrukiem." + +#~ msgid "This exports settings to a file." +#~ msgstr "Eksportuj ustawienia do pliku." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Natywny podgląd na żywo w Wayland wymaga ujścia wideo GStreamer GTK. Zainstaluj wtyczkę gtksink dla GStreamer, a następnie uruchom ponownie OrcaSlicer." diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po index ca92c4c09e..dd701176a7 100644 --- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po +++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-07-26 11:14-0300\n" "Last-Translator: Alexandre Folle de Menezes\n" "Language-Team: Portuguese, Brazilian\n" @@ -2356,13 +2356,6 @@ msgstr "Há uma atualização disponível. Abra a caixa de diálogo do pacote de msgid "%s has been removed." msgstr "%s foi removido." - -msgid "Select the language" -msgstr "Selecione o idioma" - -msgid "Language" -msgstr "Idioma" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Falha ao mudar o idioma do OrcaSlicer para %s." @@ -3571,11 +3564,15 @@ msgstr "Recuar o filamento atual no Filament Track Switch" msgid "Switch track at Filament Track Switch" msgstr "Trocar de trilha no Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "A temperatura máxima não pode exceder " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "A temperatura máxima não pode exceder %d" -msgid "The minmum temperature should not be less than " -msgstr "A temperatura mínima não pode ser menor do que " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "A temperatura mínima não pode ser menor do que %d" msgid "Type to filter..." msgstr "Digite para filtrar…" @@ -4441,6 +4438,15 @@ msgstr "" "A cópia do G-code temporário para o G-code de saída falhou. Talvez o cartão SD esteja travado pra escrita?\n" "Mensagem de erro: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Falha ao copiar o G-code temporário para o G-code de saída.\n" +"Mensagem de erro: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "A cópia do G-code temporário para o G-code de saída falhou. Pode haver problema com o dispositivo de destino, por favor tente exportar novamente ou usar outro dispositivo. O G-code de saída corrompido está em %1%.tmp." @@ -5168,10 +5174,12 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Valor %s está fora do intervalo. O intervalo válido é de %d para %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"É %s%% ou %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "É %s%% ou %s %s?" + +# AI Translated +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5196,18 +5204,15 @@ msgstr "Formato inválido. Formato de vetor esperado: \"%1%\"" msgid "System agents" msgstr "Agentes do sistema" -msgid "No plugin selected" -msgstr "Nenhum plugin selecionado" - msgid "Add plugin" msgstr "Adicionar plugin" -msgid "Select plugin" -msgstr "Selecionar plugin" - msgid "Remove plugin" msgstr "Remover plugin" +msgid "No plugin selected" +msgstr "Nenhum plugin selecionado" + msgid "Configure" msgstr "Configurar" @@ -5462,14 +5467,20 @@ msgstr "Definir para Ideal" msgid "Regroup filament" msgstr "Reagrupar filamento" -msgid "up to" -msgstr "até" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "até %1% mm" -msgid "above" -msgstr "acima" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "acima de %1% mm" -msgid "from" -msgstr "de" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "de %1% a %2% mm" msgid "Usage" msgstr "Uso" @@ -5827,7 +5838,7 @@ msgstr "Volume:" msgid "Size:" msgstr "Tamanho:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Foram encontrados conflitos de caminhos de G-code na camada %d, Z = %.2lfmm. Por favor, separe mais os objetos em conflito (%s <-> %s)." @@ -6139,11 +6150,13 @@ msgstr "Salvar projeto como" msgid "Save current project as" msgstr "Salvar o projeto atual como" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Publicar 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Exportar um arquivo 3MF com as configurações selecionadas incorporadas" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importar 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7404,6 +7417,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Inferior" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Esta configuração não especifica um tipo de recurso de plugin." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Esta configuração especifica um tipo de recurso de plugin não reconhecido: " + msgid "Plugin Selection" msgstr "Seleção de plugins" @@ -7941,11 +7962,13 @@ msgstr "Por favor, confirme se o G-code dentro dessas predefinições é seguro msgid "Customized Preset" msgstr "Predefinição Personalizada" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Algumas configurações publicadas não puderam ser aplicadas:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Alguns espaços de filamento foram alterados:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Os nomes dos componentes dentro do arquivo STEP não estão no formato UTF-8!" @@ -8351,13 +8374,17 @@ msgstr "Salvar arquivo fatiado como:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "O arquivo %s foi enviado para o espaço de armazenamento da impressora e pode ser visualizado na impressora." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Publicar arquivo 3MF como:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Falha ao exportar o arquivo 3MF publicado.\n" +"Verifique se a pasta existe online ou se outros programas estão com o arquivo aberto." msgid "Publish" msgstr "Publicar" @@ -8566,7 +8593,6 @@ msgstr "Você deseja continuar?" msgid "Language selection" msgstr "Seleção de idioma" - msgid "Asia-Pacific" msgstr "Ásia-Pacífico" @@ -8671,6 +8697,9 @@ msgstr "Caminho da Instância Atual: " msgid "General" msgstr "Geral" +msgid "Language" +msgstr "Idioma" + msgid "Metric" msgstr "Métrico" @@ -9108,10 +9137,6 @@ msgstr "Ao mover o controle deslizante de camadas na pré-visualização fatiada msgid "Dimmed layer brightness" msgstr "Brilho das camadas escurecidas" -# AI Translated -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9508,63 +9533,80 @@ msgstr "Enviando dados" msgid "Jump to webpage" msgstr "Ir para a página web" +# AI Translated msgid "Material" -msgstr "" +msgstr "Material" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filamento misto" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Alguns filamentos mistos dependem de filamentos que não serão publicados:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filamento %d (misto)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% precisa de %2%, que não está ativado." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% precisa de %2%, cujo material não será publicado." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Para publicar um filamento misto, ative todos os filamentos que ele usa e escolha Publicação completa ou atenda ao seu requisito de Tipo." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Publicar mesmo assim" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Publicar 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Selecione quais configurações serão publicadas no arquivo 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Documentação de Publicar 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Guia em vídeo de Publicar 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filamento misto - publicado por inteiro quando \"Ativar\" acima está selecionado" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Publicar este filamento misto e ativar + publicar por inteiro seus filamentos componentes" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Publicar este espaço de filamento no arquivo 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Publicação completa" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Incorporar o filamento inteiro deste espaço no arquivo 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtrar não selecionados" #, c-format, boost-format msgid "Save %s as" @@ -9583,6 +9625,10 @@ msgstr "Copia para esta predefinição todos os valores herdados da predefiniç msgid "Detach from parent" msgstr "Separar do pai" +# AI Translated +msgid "Save without parent" +msgstr "Salvar sem pai" + # AI Translated msgid "Unique preset" msgstr "Predefinição única" @@ -10249,9 +10295,17 @@ msgstr "Uma torre de purga é necessária para a detecção de aglomeração. Po msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Habilitar a altura Z precisa e a torre de preparação juntas pode causar erros de fatiamento. Deseja habilitar a altura Z precisa mesmo assim?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "O timelapse suave precisa de uma torre de purga em todas as camadas, o que não é compatível com \"Sem camadas esparsas\". \"Sem camadas esparsas\" foi desativado." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Uma torre de purga é necessária para um timelapse suave. Pode haver falhas no modelo sem a torre de purga. Deseja ativar a torre de purga?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Sem camadas esparsas\" não é compatível com o timelapse suave, que precisa de uma torre de purga em todas as camadas. O timelapse foi alterado para o modo tradicional." + msgid "Still print by object?" msgstr "Ainda imprimir por objeto?" @@ -10618,9 +10672,6 @@ msgstr "Perfis de processo compatíveis" msgid "Printable space" msgstr "Espaço de impressão" -msgid "Printer Agent" -msgstr "Agente de Impressora" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Selecione a implementação do agente de rede para comunicação com a impressora. Os agentes disponíveis são registrados na inicialização." @@ -11019,12 +11070,6 @@ msgstr "Número de extrusoras" msgid "Capabilities" msgstr "Capacidades" -msgid "Left: " -msgstr "Esquerda: " - -msgid "Right: " -msgstr "Direita: " - msgid "Show all presets (including incompatible)" msgstr "Mostrar todas as predefinições (incluindo as incompatíveis)" @@ -11846,15 +11891,22 @@ msgstr "Reparo cancelado" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Falha ao copiar o arquivo %1% para %2%: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Baixando novos perfis de fornecedor: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Pacote de configuração: %1% atualizado para %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Falha ao baixar os perfis de fornecedor: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Verifique as alterações não salvas antes de atualizar a configuração." -msgid "Configuration package: " -msgstr "Pacote de configuração: " - -msgid " updated to " -msgstr " atualizado para " - msgid "Open G-code file:" msgstr "Abrir arquivo G-code:" @@ -11914,11 +11966,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "O controle de entrada é suportado apenas pelo Klipper, RepRapFirmware e Marlin 2." -msgid "Grouping error: " -msgstr "Erro de agrupamento: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Erro de agrupamento: %1% não pode ser colocado no bico esquerdo" -msgid " can not be placed in the " -msgstr " não pode ser colocado na " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Erro de agrupamento: %1% não pode ser colocado no bico direito" msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Erro de agrupamento no modo manual. Por favor, verifique o número de bicos ou reagrupe." @@ -12031,6 +12087,10 @@ msgstr "%1% está muito perto de outros, e colisões podem ocorrer." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% está muito alto, e ocorrerão colisões." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "A posição relativa do modelo e da torre de purga não atende aos requisitos do recurso \"Sem camadas esparsas\". Ajuste as posições relativas, reduza a altura do modelo ou desative \"Sem camadas esparsas\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " está muito perto da área de exclusão, pode haver colisões durante a impressão." @@ -12371,6 +12431,9 @@ msgstr "Usar 3MF em vez de G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Ative esta opção se a impressora aceitar um arquivo 3MF como trabalho de impressão. Quando ativada, o OrcaSlicer envia o arquivo fatiado como .gcode.3mf, em vez de um arquivo .gcode comum." +msgid "Printer Agent" +msgstr "Agente de Impressora" + msgid "Select the network agent implementation for printer communication." msgstr "Selecione a implementação do agente de rede para comunicação com a impressora." @@ -13415,6 +13478,10 @@ msgstr "Retilíneo alinhado" msgid "Concentric" msgstr "Concêntrico" +# AI Translated +msgid "Spiral Inset" +msgstr "Espiral interna" + msgid "Hilbert Curve" msgstr "Curva de Hilbert" @@ -13494,26 +13561,28 @@ msgstr "" msgid "Top surface fill order" msgstr "Ordem de preenchimento da superfície superior" +# AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direção em que as superfícies superiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n" -"Para fora começa no centro da superfície, de modo que qualquer excesso de material seja empurrado em direção à borda, onde é menos visível. Para dentro começa na borda e termina com as curvas fechadas no centro.\n" -"O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção." +"Direção em que as superfícies superiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Espiral interna, Cordas Arquimedeanas, Espiral de Octagrama).\n" +"Para Fora começa no centro da superfície, de modo que o material excedente é empurrado para a borda, onde fica menos visível. Para Dentro começa na borda e termina com as curvas fechadas do centro.\n" +"Padrão usa a ordenação pelo caminho mais curto, que pode seguir em qualquer uma das direções." msgid "Bottom surface fill order" msgstr "Ordem de preenchimento da superfície inferior" +# AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Direção em que as superfícies inferiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n" -"Para dentro começa cada superfície com as curvas externas mais largas, o que melhora a aderência da primeira camada em mesas onde as curvas fechadas no centro podem não aderir. Para fora começa no centro, empurrando qualquer excesso de material em direção à borda.\n" -"O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção." +"Direção em que as superfícies inferiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Espiral interna, Cordas Arquimedeanas, Espiral de Octagrama).\n" +"Para Dentro começa cada superfície pelas curvas externas mais amplas, o que melhora a adesão da primeira camada em mesas nas quais as curvas fechadas do centro podem não grudar. Para Fora começa no centro, empurrando o material excedente para a borda.\n" +"Padrão usa a ordenação pelo caminho mais curto, que pode seguir em qualquer uma das direções." msgid "Internal solid infill pattern" msgstr "Padrão de preenchimento sólido interno" @@ -13612,6 +13681,14 @@ msgstr "Anti-horário" msgid "Clockwise" msgstr "Horário" +# AI Translated +msgid "Distance to rod" +msgstr "Distância até a haste" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Distância horizontal da ponta do bico até a borda mais distante da haste. Usada para evitar colisões na impressão por objeto." + msgid "Height to rod" msgstr "Altura até a haste" @@ -15735,6 +15812,20 @@ msgstr "Detectar paredes salientes" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Isso detecta a porcentagem relativa de saliência em relação a largura do perímetro e usa uma velocidade diferente de impressão. Para saliências 100%%, a velocidade de ponte é usada." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Imprimir por último as paredes sem suporte" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Voltas de parede que ficam inteiramente no ar só são impressas quando algo pode sustentá-las:\n" +"elas são extrudadas depois das demais paredes da sua ilha, da mais interna para fora, seja qual for a ordem das paredes.\n" +"Uma volta que somente as pontes desta camada conseguem ancorar aguarda até que essas pontes sejam impressas, enquanto uma volta que corre ao lado de uma parede apoiada mantém seu lugar antes do preenchimento, que precisa dela como ancoragem." + msgid "Outer walls" msgstr "Paredes externas" @@ -16161,6 +16252,39 @@ msgstr "Limpeza em voltas" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Para minimizar a visibilidade da costura em uma extrusão de volta fechada, é executado um pequeno movimento para dentro antes que a extrusora saia da volta." +# AI Translated +msgid "Wipe inward" +msgstr "Limpeza para dentro" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Aplica-se apenas às paredes externas, incluindo os contornos dos furos. Durante a limpeza, move o bico quente em direção às paredes internas já impressas, para reduzir o reaquecimento do plástico recém-depositado e as marcas de costura.\n" +"\n" +"Especialmente útil em alturas de camada abaixo de 0,1 mm, nas quais as marcas de limpeza ficam mais visíveis.\n" +"\n" +"Usa a limpeza normal se nenhuma parede interna adjacente já tiver sido impressa (áreas de parede única ou ordem de paredes Exterior/Interior) ou se nenhum caminho apoiado para dentro puder ser encontrado, por exemplo em cantos fechados ou em falhas da costura." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Distância de limpeza para dentro" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Distância pela qual o caminho de limpeza é deslocado para longe do perímetro externo, indicada em milímetros ou como porcentagem da largura de extrusão real da parede externa.\n" +"\n" +"Por exemplo, 50% desloca o caminho pela metade da largura da parede externa. O deslocamento efetivo é limitado tanto pela largura real da parede externa quanto pelo espaço disponível até a parede adjacente, de modo que valores acima de 100% ou uma distância absoluta equivalente não têm efeito adicional. Defina 0 para desativar o deslocamento." + msgid "Wipe before external loop" msgstr "Limpeza antes da volta externa" @@ -16418,8 +16542,9 @@ msgstr "Pega a nova ferramenta sem esperar que ela atinja a temperatura de impre msgid "No sparse layers (beta)" msgstr "Sem camadas esparsas (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Se ativado, a torre de purga não será impressa em camadas sem troca de ferramenta. Em camadas com uma troca de ferramenta, a extrusora deslocará para baixo para imprimir a torre de purga. O usuário é responsável por garantir que não haja colisão com a impressão." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Se ativado, a torre de purga não será impressa nas camadas sem mudanças de ferramenta. Nas camadas com mudança de ferramenta, a extrusora descerá para imprimir a torre de purga, de modo que a torre fica abaixo do modelo e a cabeça da ferramenta precisa descer até ela. Disposições em que isso colidiria com um objeto já impresso são rejeitadas. Não tem efeito com o timelapse suave nem com a detecção de aglomeração no bico, que precisam de uma torre em todas as camadas." msgid "Prime all printing extruders" msgstr "Preparar todas as extrusoras de impressão" @@ -16442,6 +16567,34 @@ msgstr "" msgid "Cyclic" msgstr "Cíclico" +# AI Translated +msgid "Cyclic order" +msgstr "Ordem cíclica" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Sequência de filamentos personalizada usada pela ordenação cíclica de mudanças de ferramenta, como números de filamento separados por vírgulas (p. ex. \"3,2,1,4\").\n" +"Cada camada imprime seus filamentos seguindo esta sequência; os filamentos não listados são impressos por último, em ordem crescente.\n" +"Deixe em branco para percorrer os filamentos em ordem crescente." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Aplicar a ordem cíclica à primeira camada" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Aplica a ordem cíclica de mudanças de ferramenta também à primeira camada.\n" +"Por padrão isso fica desativado, porque a primeira camada é, em vez disso, ordenada para a melhor adesão à mesa: os filamentos que imprimem detalhes pequenos e frágeis da primeira camada são impressos por último, de modo que as mudanças de ferramenta e os deslocamentos seguintes têm menos chance de soltar essas partes fracamente ancoradas. Essa ordem da primeira camada também respeita uma sequência de filamentos personalizada para a primeira camada, quando definida. O benefício da ordem cíclica (as mudanças de ferramenta extras dão a cada camada mais tempo para esfriar) não se aplica à primeira camada, que é impressa devagar e quente para favorecer a adesão.\n" +"Ative isto apenas se você precisar exatamente da mesma sequência de ferramentas em todas as camadas, inclusive a primeira, ao custo dessa otimização de adesão." + msgid "Slice gap closing radius" msgstr "Raio de fechamento de vãos de fatiamento" @@ -16451,9 +16604,6 @@ msgstr "Frestas menores que 2x o vão de fatiamento serão preenchidas durante o msgid "Slicing Mode" msgstr "Modo de Fatiamento" -msgid "Other" -msgstr "Outro" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Usar \"Par-impar\" para modelos de avião 3DLabPrint. Use \"Fechar buracos\" para fechar todos os buracos no modelo." @@ -17421,6 +17571,14 @@ msgstr "Sem verificação" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Não execute nenhuma verificação de validade, como a verificação de conflitos de caminho do G-code." +# AI Translated +msgid "Strict mode" +msgstr "Modo estrito" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Sai com código diferente de zero quando o fatiamento gera um aviso não crítico que, de outro modo, seria apenas registrado, como um modelo que precisa de suporte enquanto o suporte está desativado. Use isto em CI ou em pipelines automatizadas que nunca devem entregar um fatiamento sutilmente defeituoso. Cada um desses avisos também é listado com uma classe estável no array `warnings` do result.json, que é gravado apenas no Linux. Não pode ser combinado com --no-check, que ignora a verificação de suporte." + msgid "Normative check" msgstr "Verificação normativa" @@ -17433,11 +17591,28 @@ msgstr "Emitir Informações do Modelo" msgid "This outputs the model’s information." msgstr "Isso emite as informações do modelo." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Inspecionar malha (JSON para stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Imprime no stdout um resumo JSON de cada objeto carregado e então sai: suas caixas delimitadoras e as faces do fecho convexo sobre as quais ele pode ser apoiado, com suas normais, áreas e centros. Essas são as faces entre as quais as opções --ground-* escolhem. Alternativa legível por máquina ao --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Inspecionar pintura (JSON para stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Imprime um resumo JSON estruturado de cada camada pintada (suportes, costura, cor MMU, textura difusa) já armazenada no modelo carregado — contagem de facetas, área de superfície e caixa delimitadora local à malha por estado — e então sai. Alternativa legível por máquina a abrir as ferramentas de pintura na interface." + msgid "Export Settings" msgstr "Exportar Configurações" -msgid "This exports settings to a file." -msgstr "Isso exporta configurações para um arquivo." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Isto exporta as configurações para um arquivo. Use - para gravá-las no stdout." msgid "Send progress to pipe" msgstr "Enviar o progresso para a fila" @@ -17493,6 +17668,30 @@ msgstr "Rotacionar ao redor de Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Ângulo de rotação ao redor do Eixo Y em graus." +# AI Translated +msgid "Ground largest face" +msgstr "Apoiar na maior face" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Apoia cada objeto na maior face do seu fecho convexo e o solta sobre a mesa. Entre faces de mesmo tamanho, mantém-se a que já está voltada para baixo. Objetos sem uma face grande o bastante para se apoiar são deixados como estão. As transformações são aplicadas na ordem da linha de comando, portanto rotações indicadas antes desta opção são respeitadas. --orient 1 é executado depois de todas as transformações e substitui a orientação." + +# AI Translated +msgid "Ground face by normal" +msgstr "Apoiar na face pela normal" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Apoia cada objeto na face do fecho convexo cuja normal externa é a mais próxima da direção NX,NY,NZ e o solta sobre a mesa. A direção está em coordenadas do objeto, que incluem as rotações indicadas antes desta opção e coincidem com os eixos da mesa, a menos que o arquivo de entrada gire o objeto. Por exemplo, 1,0,0 apoia o objeto sobre o lado +X. --orient 1 é executado depois de todas as transformações e substitui a orientação." + +# AI Translated +msgid "Ground face at point" +msgstr "Apoiar na face em um ponto" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Apoia cada objeto na face do fecho convexo que contém o ponto X,Y,Z e o solta sobre a mesa. O ponto está em coordenadas do objeto, que incluem as rotações indicadas antes desta opção; --inspect-mesh informa os centros das faces nessas coordenadas. Objetos sem uma face assim são deixados como estão, e a execução falha se nenhum objeto tiver uma. --orient 1 é executado depois de todas as transformações e substitui a orientação." + msgid "Scale the model by a float factor." msgstr "Escalar o modelo por um fator decimal." @@ -20531,14 +20730,17 @@ msgstr "Esta ação não pode ser desfeita. Continuar?" msgid "Skipping objects." msgstr "Ignorando objetos." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Proporção de Material" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Altura do Modelo" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Proporção" msgid "Select Filament" msgstr "Selecionar Filamento" @@ -20779,11 +20981,15 @@ msgstr "Secando-Aquecendo" msgid "Drying-Dehumidifying" msgstr "Secando-Desumidificando" -msgid " maximum drying temperature is " -msgstr " temperatura máxima de secagem é " +# AI Translated +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "A temperatura máxima de secagem de %s é %d°C." -msgid " minimum drying temperature is " -msgstr " temperatura mínima de secagem é " +# AI Translated +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "A temperatura mínima de secagem de %s é %d°C." msgid "This filament may not be completely dried." msgstr "Este filamento pode não estar completamente seco." @@ -21196,6 +21402,90 @@ msgstr "" "Evitar empenamento\n" "Você sabia que ao imprimir materiais propensos ao empenamento como ABS, aumentar adequadamente a temperatura da mesa aquecida pode reduzir a probabilidade de empenamento?" +#~ msgid "Other" +#~ msgstr "Outro" + +#~ msgid "Left: " +#~ msgstr "Esquerda: " + +#~ msgid "Right: " +#~ msgstr "Direita: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "A temperatura máxima não pode exceder " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "A temperatura mínima não pode ser menor do que " + +#~ msgid "up to" +#~ msgstr "até" + +#~ msgid "above" +#~ msgstr "acima" + +#~ msgid "from" +#~ msgstr "de" + +#~ msgid "Configuration package: " +#~ msgstr "Pacote de configuração: " + +#~ msgid " updated to " +#~ msgstr " atualizado para " + +#~ msgid "Grouping error: " +#~ msgstr "Erro de agrupamento: " + +#~ msgid " can not be placed in the " +#~ msgstr " não pode ser colocado na " + +#~ msgid " maximum drying temperature is " +#~ msgstr " temperatura máxima de secagem é " + +#~ msgid " minimum drying temperature is " +#~ msgstr " temperatura mínima de secagem é " + +# AI Translated +#~ msgid "needs" +#~ msgstr "precisa de" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "não ativado" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "material não publicado" + +#~ msgid "Select the language" +#~ msgstr "Selecione o idioma" + +#~ msgid "Select plugin" +#~ msgstr "Selecionar plugin" + +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direção em que as superfícies superiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n" +#~ "Para fora começa no centro da superfície, de modo que qualquer excesso de material seja empurrado em direção à borda, onde é menos visível. Para dentro começa na borda e termina com as curvas fechadas no centro.\n" +#~ "O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção." + +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Direção em que as superfícies inferiores são preenchidas ao usar um padrão baseado no centro (Concêntrico, Cordas de Arquimedes, Espiral de Octograma).\n" +#~ "Para dentro começa cada superfície com as curvas externas mais largas, o que melhora a aderência da primeira camada em mesas onde as curvas fechadas no centro podem não aderir. Para fora começa no centro, empurrando qualquer excesso de material em direção à borda.\n" +#~ "O padrão usa a ordenação de caminho mais curto, que pode seguir em qualquer direção." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Se ativado, a torre de purga não será impressa em camadas sem troca de ferramenta. Em camadas com uma troca de ferramenta, a extrusora deslocará para baixo para imprimir a torre de purga. O usuário é responsável por garantir que não haja colisão com a impressão." + +#~ msgid "This exports settings to a file." +#~ msgstr "Isso exporta configurações para um arquivo." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "A visualização ao vivo nativa do Wayland requer o receptor de vídeo GTK do GStreamer. Instale o plugin gtksink para GStreamer e reinicie o OrcaSlicer." diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 972f853df4..97c1830426 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer V2.5.0\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-02-25 13:38+0300\n" "Last-Translator: Felix14_v2\n" "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg \n" @@ -2431,13 +2431,6 @@ msgstr "Доступно обновление. Проверьте меню па msgid "%s has been removed." msgstr "%s был удалён." - -msgid "Select the language" -msgstr "Выбор языка" - -msgid "Language" -msgstr "Язык" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Не удалось переключить язык на %s." @@ -3696,11 +3689,15 @@ msgstr "Втянуть текущий материал на Filament Track Switc msgid "Switch track at Filament Track Switch" msgstr "Переключить подачу на Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "Температура не должна превышать " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Температура не должна превышать %d" -msgid "The minmum temperature should not be less than " -msgstr "Температура не должна быть ниже " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Температура не должна быть ниже %d" msgid "Type to filter..." msgstr "Поиск..." @@ -4577,6 +4574,15 @@ msgstr "" "Не удалось скопировать временный G-код в целевое расположение. Возможно, накопитель защищён от записи?\n" "Сообщение об ошибке: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Не удалось скопировать временный G-код в выходной G-код.\n" +"Сообщение об ошибке: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Не удалось скопировать временный G-код в целевое расположение. Возможно, проблема с устройством хранения, попробуйте выполнить экспорт снова или использовать другое устройство. Повреждённый выходной файл G-кода находится в %1%.tmp." @@ -5334,10 +5340,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Значение %s выходит за пределы допустимого диапазона. Допустимый диапазон - от %d до %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Имелось ввиду %s%% или %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Имелось ввиду %s%% или %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5362,18 +5369,15 @@ msgstr "Недопустимый формат. Ожидаемый векторн msgid "System agents" msgstr "Системные агенты" -msgid "No plugin selected" -msgstr "Плагины не выбраны" - msgid "Add plugin" msgstr "Добавить плагин" -msgid "Select plugin" -msgstr "Выбрать плагин" - msgid "Remove plugin" msgstr "Удалить плагин" +msgid "No plugin selected" +msgstr "Плагины не выбраны" + msgid "Configure" msgstr "Настроить" @@ -5656,14 +5660,20 @@ msgstr "Оптимизировать" msgid "Regroup filament" msgstr "Изменить" -msgid "up to" -msgstr "до" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "до %1% мм" -msgid "above" -msgstr "после" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "выше %1% мм" -msgid "from" -msgstr "с" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "от %1% до %2% мм" msgid "Usage" msgstr "Расход" @@ -6025,7 +6035,7 @@ msgstr "Объём:" msgid "Size:" msgstr "Размер:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "В G-коде на %d слое (z = %.2lf мм) обнаружен конфликт путей. Пожалуйста, разместите конфликтующие модели дальше друг от друга (%s <-> %s)." @@ -6372,11 +6382,13 @@ msgstr "Сохранить проект как" msgid "Save current project as" msgstr "Сохранить текущий проект как" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Опубликовать 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Экспорт файла 3MF со встроенными выбранными настройками" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Импорт 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7662,6 +7674,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Снизу" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Эта настройка не указывает тип возможности плагина." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Эта настройка указывает нераспознанный тип возможности плагина: " + msgid "Plugin Selection" msgstr "Выбор плагинов" @@ -8212,11 +8232,13 @@ msgstr "Во избежание повреждения принтера убед msgid "Customized Preset" msgstr "Пользовательский профиль" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Некоторые опубликованные настройки не удалось применить:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Некоторые слоты материалов были изменены:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Имена компонентов внутри файла STEP не в формате UTF-8." @@ -8630,13 +8652,17 @@ msgstr "Сохранить нарезанный файл как:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Файл %s отправлен в память принтера и может быть просмотрен на нём." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Опубликовать файл 3MF как:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Не удалось экспортировать опубликованный файл 3MF.\n" +"Проверьте, доступна ли папка в сети и не открыт ли файл в других программах." msgid "Publish" msgstr "Опубликовать" @@ -8846,7 +8872,6 @@ msgstr "Хотите продолжить?" msgid "Language selection" msgstr "Выбор языка" - msgid "Asia-Pacific" msgstr "Азиатско-Тихоокеанский" @@ -8952,6 +8977,9 @@ msgstr "Расположение: " msgid "General" msgstr "Общие" +msgid "Language" +msgstr "Язык" + msgid "Metric" msgstr "Метрическая СИ" @@ -9392,9 +9420,6 @@ msgstr "Затемнять слои, находящиеся ниже текущ msgid "Dimmed layer brightness" msgstr "Яркость затемнённых слоёв" -msgid "%" -msgstr "%" - msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" "99% is barely darkened, 0% renders them black. Capped at 99% because 100% would be the same as disabling the option." @@ -9800,63 +9825,80 @@ msgstr "Отправка данных" msgid "Jump to webpage" msgstr "Перейти на страницу" +# AI Translated msgid "Material" -msgstr "" +msgstr "Материал" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Смешанный материал" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Некоторые смешанные материалы зависят от материалов, которые не будут опубликованы:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Материал %d (смешанный)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% требует %2%, но он не включён." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% требует %2%, но его материал не будет опубликован." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Чтобы опубликовать смешанный материал, включите каждый используемый им материал и выберите «Полная публикация» либо выполните требование «Тип»." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Всё равно опубликовать" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Опубликовать 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Выберите, какие настройки будут опубликованы в файле 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki по публикации 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Видеоруководство по публикации 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Смешанный материал — публикуется целиком, когда выше выбрано «Включить»" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Опубликовать этот смешанный материал и включить + полностью опубликовать его составляющие материалы" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Опубликовать этот слот материала в файле 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Полная публикация" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Встроить материал этого слота целиком в файл 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Фильтровать невыбранные" #, c-format, boost-format msgid "Save %s as" @@ -9875,6 +9917,10 @@ msgstr "Копирует в этот профиль все значения, у msgid "Detach from parent" msgstr "Сделать независимым" +# AI Translated +msgid "Save without parent" +msgstr "Сохранить без родителя" + # AI Translated msgid "Unique preset" msgstr "Независимый профиль" @@ -10551,9 +10597,17 @@ msgstr "Для обнаружения налипаний на сопле тре msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Включение «Точной высоты по Z» совместно с черновой башней может привести к ошибкам нарезки. Продолжить?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Для плавного таймлапса требуется черновая башня на каждом слое, что несовместимо с параметром «Без разреженных слоёв». Параметр «Без разреженных слоёв» отключён." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Для сглаженного таймлапса требуется черновая башня, без неё на модели могут возникнуть дефекты. Включить черновую башню?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "Параметр «Без разреженных слоёв» несовместим с плавным таймлапсом, которому требуется черновая башня на каждом слое. Таймлапс переключён в обычный режим." + msgid "Still print by object?" msgstr "Продолжить печать по очереди?" @@ -10958,9 +11012,6 @@ msgstr "Совместимые настройки" msgid "Printable space" msgstr "Область печати" -msgid "Printer Agent" -msgstr "Сетевой агент" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Реализация сетевого агента для обмена информацией с принтером. Доступные реализации определяются при запуске." @@ -11363,12 +11414,6 @@ msgstr "Количество экструдеров" msgid "Capabilities" msgstr "Возможности" -msgid "Left: " -msgstr "Левый: " - -msgid "Right: " -msgstr "Правый: " - msgid "Show all presets (including incompatible)" msgstr "Показать все профили (включая несовместимые)" @@ -12203,15 +12248,22 @@ msgstr "Восстановление отменено" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Не удалось скопировать файл %1% в %2%: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Загрузка новых профилей производителей: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Пакет профилей: %1% обновлён до %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Не удалось загрузить профили производителей: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Перед обновлением профилей необходимо проверить несохранённые изменения." -msgid "Configuration package: " -msgstr "Пакет профилей: " - -msgid " updated to " -msgstr " обновлён до " - msgid "Open G-code file:" msgstr "Выберите G-код файл:" @@ -12271,12 +12323,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping поддерживается только в Klipper, RepRapFirmware и Marlin 2." -msgid "Grouping error: " -msgstr "Ошибка группировки: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Ошибка группировки: %1% нельзя разместить в левом сопле" -# filament_type + <перевод> + extruder_name -msgid " can not be placed in the " -msgstr " нельзя заправить в " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Ошибка группировки: %1% нельзя разместить в правом сопле" msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Ошибка группировки в ручном режиме. Проверьте количество сопел или измените группировку." @@ -12389,6 +12444,10 @@ msgstr "%1% находится слишком близко к другим, чт msgid "%1% is too tall, and collisions will be caused." msgstr "Модель «%1%» слишком высокая, что приведёт к столкновению механики." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Взаимное расположение модели и черновой башни не отвечает требованиям функции «Без разреженных слоёв». Измените их взаимное расположение, уменьшите высоту модели или отключите параметр «Без разреженных слоёв»." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " находится слишком близко к области исключения, что может привести к столкновению при печати." @@ -12740,6 +12799,9 @@ msgstr "Сжатие G-кода перед отправкой" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Рекомендуется для принтеров, поддерживающих печать из архивов 3MF. Файлы печати будут отправляться с расширением \".gcode.3mf\"." +msgid "Printer Agent" +msgstr "Сетевой агент" + msgid "Select the network agent implementation for printer communication." msgstr "Реализация сетевого агента для обмена информацией с принтером." @@ -13846,6 +13908,10 @@ msgstr "Ровный зигзаг" msgid "Concentric" msgstr "Эквидистанты" +# AI Translated +msgid "Spiral Inset" +msgstr "Спиральный отступ" + msgid "Hilbert Curve" msgstr "Кривая Гильберта" @@ -13939,28 +14005,28 @@ msgstr "" msgid "Top surface fill order" msgstr "Направление печати" +# AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Направление печати спирали/эквидистант на верхних поверхностях. Позволяет управляемо распределять избыток материала.\n" -"• По умолчанию: использовать кратчайший путь.\n" -"• Наружу: от центра шаблона к краю модели.\n" -"• Внутрь: от края модели к центру шаблона." +"Направление заполнения верхних поверхностей при использовании шаблона, идущего от центра (Эквидистанты, Спиральный отступ, Спираль Архимеда, Спиральная октаграмма).\n" +"Наружу начинает от центра поверхности, поэтому излишек материала вытесняется к краю, где он менее заметен. Внутрь начинает от края и заканчивается тесными изгибами в центре.\n" +"По умолчанию используется порядок по кратчайшему пути, который может идти в любом направлении." msgid "Bottom surface fill order" msgstr "Направление печати" +# AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Направление печати спирали/эквидистант на нижних поверхностях. Позволяет управляемо распределять избыток материала.\n" -"• По умолчанию: использовать кратчайший путь.\n" -"• Наружу: от центра шаблона к краю модели.\n" -"• Внутрь: от края модели к центру шаблона." +"Направление заполнения нижних поверхностей при использовании шаблона, идущего от центра (Эквидистанты, Спиральный отступ, Спираль Архимеда, Спиральная октаграмма).\n" +"Внутрь начинает каждую поверхность с более широких внешних изгибов, что улучшает адгезию первого слоя на столах, к которым тесные изгибы в центре могут не прилипать. Наружу начинает от центра, вытесняя излишек материала к краю.\n" +"По умолчанию используется порядок по кратчайшему пути, который может идти в любом направлении." msgid "Internal solid infill pattern" msgstr "Шаблон сплошного заполнения" @@ -14078,6 +14144,14 @@ msgstr "Против часовой стрелки" msgid "Clockwise" msgstr "По часовой стрелке" +# AI Translated +msgid "Distance to rod" +msgstr "Расстояние до штанги" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Расстояние по горизонтали от кончика сопла до дальнего края штанги. Используется для предотвращения столкновений при печати моделей по очереди." + msgid "Height to rod" msgstr "Высота до вала" @@ -16454,6 +16528,20 @@ msgstr "Обнаруживать нависающие периметры" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Использовать разную скорость печати в зависимости от выноса линии относительно её опоры. Для нависаний без опоры используется скорость печати мостов." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Печатать неподдерживаемые периметры последними" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Контуры периметров, полностью висящие в воздухе, печатаются только тогда, когда их есть чему удержать:\n" +"они выдавливаются после остальных периметров своего острова, начиная с самого внутреннего, независимо от порядка периметров.\n" +"Контур, который могут закрепить только мосты этого слоя, ждёт, пока эти мосты будут напечатаны, а контур, идущий вдоль опирающегося периметра, сохраняет своё место перед заполнением, которому он нужен как якорь." + # В секции "Материал для линий" msgid "Outer walls" msgstr "Внешние периметры" @@ -16964,6 +17052,39 @@ msgstr "" "\n" "Примечание: при отключении настройки зазор не будет заполняться остатками материала, что также может уменьшить заметность шва в сочетании с быстрым переходом к внутренним периметрам." +# AI Translated +msgid "Wipe inward" +msgstr "Очистка внутрь" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Применяется только к внешним периметрам, включая контуры отверстий. Во время очистки перемещает горячее сопло к уже напечатанным внутренним периметрам, чтобы уменьшить повторный нагрев только что напечатанного пластика и следы шва.\n" +"\n" +"Особенно полезно при высоте слоя менее 0,1 мм, где следы очистки заметнее.\n" +"\n" +"Использует обычную очистку, если рядом нет уже напечатанного внутреннего периметра (области с одним периметром или порядок периметров «Снаружи внутрь») либо если не удаётся найти опирающийся путь внутрь, например в тесных углах или разрывах шва." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Расстояние очистки внутрь" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Расстояние, на которое путь очистки смещается от внешнего периметра, задаётся в миллиметрах или в процентах от фактической ширины линии внешнего периметра.\n" +"\n" +"Например, 50% смещает путь на половину ширины внешнего периметра. Фактическое смещение ограничено как реальной шириной внешнего периметра, так и доступным промежутком до соседнего периметра, поэтому значения выше 100% или эквивалентное абсолютное расстояние не дают дополнительного эффекта. Задайте 0, чтобы отключить смещение." + # Подворот начала линии на шве, упреждающая подача перед внешним периметром, # заглубление подачи ..., смещённая подача msgid "Wipe before external loop" @@ -17255,9 +17376,9 @@ msgstr "Забирает новый инструмент, не дожидаяс msgid "No sparse layers (beta)" msgstr "Без разреженных слоёв (beta)" -# Requires refactoring -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Если включено, черновая башня не будет печататься на слоях, где не происходит смена материала/инструмента. На слоях, где происходит смена материала, экструдер будет опускаться вниз до верхней части черновой башни, чтобы напечатать её. Слайсер не проверяет столкновения при перемещении, и пользователь сам несет ответственность за правильную настройку всех соответствующих параметров." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Если включено, черновая башня не будет печататься на слоях без смены инструмента. На слоях со сменой инструмента экструдер опустится вниз, чтобы напечатать черновую башню, поэтому башня оказывается ниже модели, и печатающей голове приходится тянуться к ней вниз. Компоновки, при которых это привело бы к столкновению с уже напечатанной моделью, отклоняются. Не действует при плавном таймлапсе и при обнаружении налипаний, которым нужна башня на каждом слое." msgid "Prime all printing extruders" msgstr "Подготовка всех печатающих экструдеров" @@ -17282,6 +17403,34 @@ msgstr "" msgid "Cyclic" msgstr "Цикличный" +# AI Translated +msgid "Cyclic order" +msgstr "Циклический порядок" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Пользовательская последовательность материалов, используемая циклическим порядком смены инструмента, в виде номеров материалов через запятую (например, «3,2,1,4»).\n" +"Каждый слой печатает свои материалы в этой последовательности; не указанные материалы печатаются последними, по возрастанию.\n" +"Оставьте пустым, чтобы перебирать материалы по возрастанию." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Применять циклический порядок к первому слою" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Применяет циклический порядок смены инструмента и к первому слою.\n" +"По умолчанию отключено, поскольку первый слой вместо этого упорядочивается для наилучшей адгезии к столу: материалы, которыми печатаются мелкие хрупкие элементы первого слоя, печатаются последними, поэтому последующие смены инструмента и перемещения реже отрывают эти слабо закреплённые части. Этот порядок первого слоя учитывает также заданную пользователем последовательность материалов для первого слоя, если она указана. Преимущество циклического порядка (дополнительные смены инструмента дают каждому слою больше времени на остывание) к первому слою не относится, так как он печатается медленно и горячим ради адгезии.\n" +"Включайте это, только если вам нужна в точности одна и та же последовательность инструментов на каждом слое, включая первый, ценой такой оптимизации адгезии." + msgid "Slice gap closing radius" msgstr "Радиус закрытия зазоров полигональной сетки" @@ -17292,9 +17441,6 @@ msgstr "Часто в импортируемых в программу моде msgid "Slicing Mode" msgstr "Режим нарезки" -msgid "Other" -msgstr "Прочее" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "" "Режим нарезки «Чётный-нечётный» применяется для моделей с намеренно нарушенной целостностью. Например, для моделей самолётов с ресурса 3DLabPrint.\n" @@ -18398,6 +18544,14 @@ msgstr "Без проверки" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Не запускать никакие проверки валидности, такие как проверка на конфликт путей в G-коде." +# AI Translated +msgid "Strict mode" +msgstr "Строгий режим" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Завершает работу с ненулевым кодом, если при нарезке возникает некритическое предупреждение, которое иначе только записывается в журнал, например модель, которой нужны поддержки, когда поддержки отключены. Используйте это в CI или скриптовых конвейерах, которые никогда не должны выдавать незаметно испорченную нарезку. Каждое такое предупреждение также перечисляется с устойчивым классом в массиве `warnings` файла result.json, который создаётся только в Linux. Нельзя сочетать с --no-check, который пропускает проверку поддержек." + msgid "Normative check" msgstr "Нормативная проверка" @@ -18412,12 +18566,29 @@ msgstr "Информация о модели" msgid "This outputs the model’s information." msgstr "Вывод информации о модели." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Проверить полисетку (JSON в stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Выводит в stdout сводку JSON по каждой загруженной модели и завершает работу: её ограничивающие параллелепипеды и грани выпуклой оболочки, на которые её можно положить, с их нормалями, площадями и центрами. Именно из этих граней выбирают параметры --ground-*. Машиночитаемая альтернатива --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Проверить покраску (JSON в stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Выводит структурированную сводку JSON по каждому окрашенному слою (поддержки, шов, цвет MMU, нечёткая оболочка), уже сохранённому в загруженной модели, — количество граней, площадь поверхности и ограничивающий параллелепипед в координатах полисетки для каждого состояния — и завершает работу. Машиночитаемая альтернатива открытию инструментов покраски в интерфейсе." + # ??? msgid "Export Settings" msgstr "Экспорт настроек" -msgid "This exports settings to a file." -msgstr "Экспорт настроек в файл." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Экспортирует настройки в файл. Используйте -, чтобы записать их в stdout." # командная строка? нужен ли пеевод? msgid "Send progress to pipe" @@ -18477,6 +18648,30 @@ msgstr "Поворот вокруг оси Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Угол поворота вокруг оси Y в градусах." +# AI Translated +msgid "Ground largest face" +msgstr "Положить на наибольшую грань" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Кладёт каждую модель на наибольшую грань её выпуклой оболочки и опускает на стол. Из одинаковых по площади граней сохраняется та, что уже обращена вниз. Модели без достаточно большой грани для опоры остаются без изменений. Преобразования выполняются в порядке командной строки, поэтому повороты, заданные до этого параметра, учитываются. --orient 1 выполняется после всех преобразований и заменяет ориентацию." + +# AI Translated +msgid "Ground face by normal" +msgstr "Положить на грань по нормали" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Кладёт каждую модель на ту грань выпуклой оболочки, внешняя нормаль которой ближе всего к направлению NX,NY,NZ, и опускает её на стол. Направление задаётся в координатах модели, которые включают повороты, указанные до этого параметра, и совпадают с осями стола, если входной файл не поворачивает модель. Например, 1,0,0 ставит модель на сторону +X. --orient 1 выполняется после всех преобразований и заменяет ориентацию." + +# AI Translated +msgid "Ground face at point" +msgstr "Положить на грань в точке" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Кладёт каждую модель на ту грань выпуклой оболочки, которая содержит точку X,Y,Z, и опускает её на стол. Точка задаётся в координатах модели, которые включают повороты, указанные до этого параметра; --inspect-mesh выводит центры граней именно в них. Модели без такой грани остаются без изменений, а запуск завершается ошибкой, если такой грани нет ни у одной модели. --orient 1 выполняется после всех преобразований и заменяет ориентацию." + msgid "Scale the model by a float factor." msgstr "Масштабировать модель с помощью коэффициента." @@ -21611,14 +21806,17 @@ msgstr "Это действие необратимо. Продолжить?" msgid "Skipping objects." msgstr "Исключение объектов." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Доля материала" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Высота модели" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Доля" msgid "Select Filament" msgstr "Выбрать материал" @@ -21868,11 +22066,15 @@ msgstr "Сушка — нагрев" msgid "Drying-Dehumidifying" msgstr "Сушка — вывод влаги" -msgid " maximum drying temperature is " -msgstr " максимальная температура сушки — " +# AI Translated +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Максимальная температура сушки для %s — %d°C." -msgid " minimum drying temperature is " -msgstr " минимальная температура сушки — " +# AI Translated +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Минимальная температура сушки для %s — %d°C." msgid "This filament may not be completely dried." msgstr "Сушка этого материала может не быть эффективной." @@ -22297,6 +22499,94 @@ msgstr "" "Предотвращение коробления материала\n" "Знаете ли вы, что при печати материалами, склонными к короблению, таких как ABS, повышение температуры подогреваемого стола может снизить эту вероятность?" +#~ msgid "Other" +#~ msgstr "Прочее" + +#~ msgid "Left: " +#~ msgstr "Левый: " + +#~ msgid "Right: " +#~ msgstr "Правый: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Температура не должна превышать " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Температура не должна быть ниже " + +#~ msgid "up to" +#~ msgstr "до" + +#~ msgid "above" +#~ msgstr "после" + +#~ msgid "from" +#~ msgstr "с" + +#~ msgid "Configuration package: " +#~ msgstr "Пакет профилей: " + +#~ msgid " updated to " +#~ msgstr " обновлён до " + +#~ msgid "Grouping error: " +#~ msgstr "Ошибка группировки: " + +# filament_type + <перевод> + extruder_name +#~ msgid " can not be placed in the " +#~ msgstr " нельзя заправить в " + +#~ msgid " maximum drying temperature is " +#~ msgstr " максимальная температура сушки — " + +#~ msgid " minimum drying temperature is " +#~ msgstr " минимальная температура сушки — " + +# AI Translated +#~ msgid "needs" +#~ msgstr "требует" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "не включён" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "материал не опубликован" + +#~ msgid "Select the language" +#~ msgstr "Выбор языка" + +#~ msgid "Select plugin" +#~ msgstr "Выбрать плагин" + +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Направление печати спирали/эквидистант на верхних поверхностях. Позволяет управляемо распределять избыток материала.\n" +#~ "• По умолчанию: использовать кратчайший путь.\n" +#~ "• Наружу: от центра шаблона к краю модели.\n" +#~ "• Внутрь: от края модели к центру шаблона." + +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Направление печати спирали/эквидистант на нижних поверхностях. Позволяет управляемо распределять избыток материала.\n" +#~ "• По умолчанию: использовать кратчайший путь.\n" +#~ "• Наружу: от центра шаблона к краю модели.\n" +#~ "• Внутрь: от края модели к центру шаблона." + +# Requires refactoring +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Если включено, черновая башня не будет печататься на слоях, где не происходит смена материала/инструмента. На слоях, где происходит смена материала, экструдер будет опускаться вниз до верхней части черновой башни, чтобы напечатать её. Слайсер не проверяет столкновения при перемещении, и пользователь сам несет ответственность за правильную настройку всех соответствующих параметров." + +#~ msgid "This exports settings to a file." +#~ msgstr "Экспорт настроек в файл." + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Для нативного отображения трансляции в Wayland требуется gtksink (плагин для GStreamer). Установите необходимый пакет плагинов и перезапустите OrcaSlicer." diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 472b105744..ce0d5f5034 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -2767,13 +2767,6 @@ msgstr "Det finns en uppdatering tillgänglig. Öppna dialogrutan för förinst msgid "%s has been removed." msgstr "%s har tagits bort." - -msgid "Select the language" -msgstr "Välj språk" - -msgid "Language" -msgstr "Språk" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -4104,12 +4097,14 @@ msgid "Switch track at Filament Track Switch" msgstr "Byt spår vid Filament Track Switch" # AI Translated -msgid "The maximum temperature cannot exceed " -msgstr "Maxtemperaturen får inte överstiga " +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Maxtemperaturen får inte överstiga %d" # AI Translated -msgid "The minmum temperature should not be less than " -msgstr "Minimitemperaturen bör inte vara lägre än " +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Minimitemperaturen bör inte vara lägre än %d" # AI Translated msgid "Type to filter..." @@ -5066,6 +5061,15 @@ msgstr "" "Det gick inte att kopiera den tillfälliga G-code-filen till utdatafilen. Kanske är SD-kortet skrivskyddat?\n" "Felmeddelande: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Kopieringen av den tillfälliga G-koden till utdata-G-koden misslyckades.\n" +"Felmeddelande: %1%" + # AI Translated #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." @@ -5904,10 +5908,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Värdet %s ligger utanför intervallet. Giltigt intervall är från %d till %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Det är %s%% eller %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Det är %s%% eller %s %s?" + +msgid "%" +msgstr "%" # AI Translated #, boost-format @@ -5938,22 +5943,18 @@ msgstr "Ogiltligt format. Förväntat vector format: \"%1%\"" msgid "System agents" msgstr "Systemagenter" -# AI Translated -msgid "No plugin selected" -msgstr "Ingen insticksmodul vald" - # AI Translated msgid "Add plugin" msgstr "Lägg till insticksmodul" -# AI Translated -msgid "Select plugin" -msgstr "Välj insticksmodul" - # AI Translated msgid "Remove plugin" msgstr "Ta bort insticksmodul" +# AI Translated +msgid "No plugin selected" +msgstr "Ingen insticksmodul vald" + # AI Translated msgid "Configure" msgstr "Konfigurera" @@ -6234,14 +6235,20 @@ msgstr "Ställ in på optimal" msgid "Regroup filament" msgstr "Gruppera om filament" -msgid "up to" -msgstr "upp till" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "upp till %1% mm" -msgid "above" -msgstr "över" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "över %1% mm" -msgid "from" -msgstr "från" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "från %1% till %2% mm" msgid "Usage" msgstr "Användning" @@ -6630,7 +6637,7 @@ msgid "Size:" msgstr "Storlek:" # AI Translated -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Konflikter mellan G-code-banor hittades på lager %d, Z = %.2lfmm. Placera de objekt som krockar längre ifrån varandra (%s <-> %s)." @@ -6966,11 +6973,13 @@ msgstr "Spara Projekt som" msgid "Save current project as" msgstr "Spara nuvarande projekt som" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Publicera 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Exportera en 3MF-fil med de valda inställningarna inbäddade" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Importera 3MF/STL/STEP/SVG/OBJ/AMF" @@ -8360,6 +8369,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Bottenlager" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Den här inställningen anger ingen typ av insticksmodulsfunktion." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Den här inställningen anger en okänd typ av insticksmodulsfunktion: " + # AI Translated msgid "Plugin Selection" msgstr "Val av insticksmodul" @@ -8996,11 +9013,13 @@ msgstr "Bekräfta att G-koderna i dessa inställningar är säkra för att förh msgid "Customized Preset" msgstr "Anpassad inställning" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Vissa publicerade inställningar kunde inte tillämpas:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Vissa filamentplatser har ändrats:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Komponent namnet i STEP filen är inte UTF-8 format!" @@ -9438,13 +9457,17 @@ msgstr "Spara beredningen som:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Filen %s har skickats till skrivarens lagringsutrymme och kan visas på skrivaren." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Publicera 3MF-filen som:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Det gick inte att exportera den publicerade 3MF-filen.\n" +"Kontrollera om mappen finns online eller om andra program har filen öppen." msgid "Publish" msgstr "Publicera" @@ -9688,7 +9711,6 @@ msgstr "Fortsätta?" msgid "Language selection" msgstr "Språkval" - msgid "Asia-Pacific" msgstr "Asien-Stillahavsområdet" @@ -9808,6 +9830,9 @@ msgstr "Sökväg till aktuell instans: " msgid "General" msgstr "Allmän" +msgid "Language" +msgstr "Språk" + msgid "Metric" msgstr "Metrisk" @@ -10326,9 +10351,6 @@ msgstr "När du drar i lagerreglaget i den beredda förhandsgranskningen rendera msgid "Dimmed layer brightness" msgstr "Ljusstyrka för dämpade lager" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -10771,63 +10793,80 @@ msgstr "Laddar upp data" msgid "Jump to webpage" msgstr "Växla till hemsidan" +# AI Translated msgid "Material" -msgstr "" +msgstr "Material" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Blandat filament" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Vissa blandade filament är beroende av filament som inte kommer att publiceras:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (blandat)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% behöver %2%, som inte är aktiverat." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% behöver %2%, vars material inte kommer att publiceras." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "För att publicera ett blandat filament, aktivera varje filament det använder och välj Fullständig publicering eller uppfyll dess Typ-krav." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Publicera ändå" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Publicera 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Välj vilka inställningar som ska publiceras i 3MF-filen" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki för Publicera 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Videoguide för Publicera 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Blandat filament - publiceras i sin helhet när \"Aktivera\" ovan är valt" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Publicera det här blandade filamentet och aktivera + publicera dess ingående filament fullständigt" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Publicera den här filamentplatsen i 3MF-filen" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Fullständig publicering" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Bädda in hela filamentet från den här platsen i 3MF-filen" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Filtrera ej valda" #, c-format, boost-format msgid "Save %s as" @@ -10847,6 +10886,10 @@ msgstr "Kopierar alla ärvda värden från den överordnade förinställningen t msgid "Detach from parent" msgstr "Koppla loss från överordnad" +# AI Translated +msgid "Save without parent" +msgstr "Spara utan överordnad" + # AI Translated msgid "Unique preset" msgstr "Unik förinställning" @@ -11624,9 +11667,17 @@ msgstr "Ett prime torn krävs för klumpdetektering. Utan prime torn kan modelle msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Att aktivera både exakt Z-höjd och rengöringstornet kan orsaka skärningsfel. Vill du fortfarande aktivera exakt Z-höjd?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Jämn timelapse kräver ett prime torn på varje lager, vilket inte fungerar ihop med \"Inga glesa lager\". \"Inga glesa lager\" har stängts av." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Prime tower krävs för Smooth timelapse-läge. Det kan bli fel på modellen utan prime tower. Vill du aktivera prime tower?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Inga glesa lager\" fungerar inte ihop med jämn timelapse, som kräver ett prime torn på varje lager. Timelapse har växlat till traditionellt läge." + msgid "Still print by object?" msgstr "Fortfarande utskrift per objekt?" @@ -12052,10 +12103,6 @@ msgstr "Kompatibla process profiler" msgid "Printable space" msgstr "Utskriftsbar yta" -# AI Translated -msgid "Printer Agent" -msgstr "Skrivaragent" - # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Välj vilken nätverksagentimplementation som ska användas för kommunikation med skrivaren. Tillgängliga agenter registreras vid start." @@ -12501,14 +12548,6 @@ msgstr "Antal extruders" msgid "Capabilities" msgstr "Förmågor" -# AI Translated -msgid "Left: " -msgstr "Vänster: " - -# AI Translated -msgid "Right: " -msgstr "Höger: " - msgid "Show all presets (including incompatible)" msgstr "Visa alla inställningar (inklusive inkompatibla)" @@ -13450,17 +13489,22 @@ msgstr "Reparation avbruten" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Kopierar fil %1% till %2% misslyckade: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Laddar ner nya leverantörsprofiler: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Konfigurationspaket: %1% uppdaterat till %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Det gick inte att ladda ner leverantörsprofiler: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Kontrollera ej sparade ändringar innan konfigureringen uppdateras." -# AI Translated -msgid "Configuration package: " -msgstr "Konfigurationspaket: " - -# AI Translated -msgid " updated to " -msgstr " uppdaterat till " - msgid "Open G-code file:" msgstr "Öppna G-kod fil:" @@ -13528,12 +13572,14 @@ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping stöds endast av Klipper, RepRapFirmware och Marlin 2." # AI Translated -msgid "Grouping error: " -msgstr "Grupperingsfel: " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Grupperingsfel: %1% kan inte placeras i vänster nozzel" # AI Translated -msgid " can not be placed in the " -msgstr " kan inte placeras i " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Grupperingsfel: %1% kan inte placeras i höger nozzel" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -13648,6 +13694,10 @@ msgstr "%1% är för nära andra och kan orsaka kollisioner." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% är för hög, och kollisioner kommer att uppstå." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Modellens och prime tornets inbördes placering uppfyller inte kraven för funktionen \"Inga glesa lager\". Justera deras inbördes placering, sänk modellens höjd eller stäng av \"Inga glesa lager\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " är för nära undantagsområdet, det kan förekomma kollisioner vid utskrift." @@ -14050,6 +14100,10 @@ msgstr "Använd 3MF i stället för G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Aktivera detta om skrivaren tar emot en 3MF-fil som utskriftsjobb. När det är aktiverat skickar Orca Slicer den beredda filen som en .gcode.3mf i stället för en vanlig .gcode-fil." +# AI Translated +msgid "Printer Agent" +msgstr "Skrivaragent" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Välj vilken nätverksagentimplementation som ska användas för kommunikation med skrivaren." @@ -15214,6 +15268,10 @@ msgstr "Justerade Rätlinjig" msgid "Concentric" msgstr "Koncentrisk" +# AI Translated +msgid "Spiral Inset" +msgstr "Spiralinsättning" + msgid "Hilbert Curve" msgstr "Hilbert kurvan" @@ -15311,13 +15369,13 @@ msgstr "Fyllordning för ovansidan" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Riktning i vilken ovansidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n" -"Utåt börjar i ytans mitt, så att överskottsmaterial trycks ut mot kanten där det syns minst. Inåt börjar vid kanten och slutar med de trånga kurvorna i mitten.\n" -"Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen." +"Riktningen som toppytor fylls i när ett mönster som utgår från mitten används (Koncentrisk, Spiralinsättning, Arkimediska kordor, Oktagramspiral).\n" +"Utåt börjar i ytans mitt, så att överflödigt material trycks ut mot kanten där det syns minst. Inåt börjar vid kanten och slutar med de trånga kurvorna i mitten.\n" +"Standard använder ordningen efter kortaste väg, som kan gå åt vilket håll som helst." # AI Translated msgid "Bottom surface fill order" @@ -15325,13 +15383,13 @@ msgstr "Fyllordning för undersidan" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Riktning i vilken undersidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n" -"Inåt börjar varje yta med de bredare yttre kurvorna, vilket förbättrar det första lagrets vidhäftning på byggplattor där de trånga kurvorna i mitten kanske inte fastnar. Utåt börjar i mitten och trycker överskottsmaterial mot kanten.\n" -"Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen." +"Riktningen som bottenytor fylls i när ett mönster som utgår från mitten används (Koncentrisk, Spiralinsättning, Arkimediska kordor, Oktagramspiral).\n" +"Inåt börjar varje yta med de bredare yttre kurvorna, vilket förbättrar första lagrets vidhäftning på byggplattor där de trånga kurvorna i mitten kanske inte fäster. Utåt börjar i mitten och trycker ut överflödigt material mot kanten.\n" +"Standard använder ordningen efter kortaste väg, som kan gå åt vilket håll som helst." msgid "Internal solid infill pattern" msgstr "Invändigt mönster för fyllning av solida ytor" @@ -15448,6 +15506,14 @@ msgstr "Moturs" msgid "Clockwise" msgstr "Medurs" +# AI Translated +msgid "Distance to rod" +msgstr "Avstånd till stången" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Vågrätt avstånd från nozzelns spets till stångens bortre kant. Används för att undvika kollisioner vid utskrift per objekt." + msgid "Height to rod" msgstr "Höjd till axel" @@ -17945,6 +18011,20 @@ msgstr "Upptäck överhängs vägg" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Upptäck överhängs procenten i förhållande till linjebredden och använd olika hastigheter för att skriva ut. Vid 100%% överhäng, bridge/brygg hastighet användas." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Skriv ut väggar utan stöd sist" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Väggvarv som ligger helt i luften skrivs ut först när något kan hålla upp dem:\n" +"de extruderas efter de andra väggarna på sin ö, den innersta först, oavsett väggordning.\n" +"Ett varv som bara det här lagrets bridges kan förankra väntar tills dessa bridges är utskrivna, medan ett varv som löper längs en vägg med stöd behåller sin plats före ifyllnaden, som behöver det som förankring." + # AI Translated msgid "Outer walls" msgstr "Ytterväggar" @@ -18463,6 +18543,39 @@ msgstr "Torka på varv" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "För att minimera sömmens synlighet i en sluten varvextrudering görs en liten rörelse inåt innan extrudern lämnar varvet." +# AI Translated +msgid "Wipe inward" +msgstr "Torka inåt" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Gäller endast yttre väggar, inklusive hålkonturer. Flyttar den heta nozzeln mot redan utskrivna inre väggar under avtorkningen, för att minska återuppvärmningen av nyss utskriven plast och sömmärken.\n" +"\n" +"Särskilt användbart vid lagerhöjder under 0,1 mm, där avtorkningsmärken syns tydligare.\n" +"\n" +"Använder vanlig avtorkning om ingen angränsande inre vägg redan är utskriven (områden med en enda vägg eller väggordningen Yttre/Inre), eller om ingen understödd väg inåt kan hittas, till exempel i trånga hörn eller vid sömglapp." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Avstånd för torka inåt" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Avståndet som avtorkningsvägen förskjuts bort från den yttre perimetern, angivet i millimeter eller som procent av den yttre väggens faktiska extruderingsbredd.\n" +"\n" +"Till exempel förskjuter 50% vägen med halva den yttre väggens bredd. Den verkliga förskjutningen begränsas både av den yttre väggens faktiska bredd och av det tillgängliga utrymmet till den angränsande väggen, så värden över 100% eller ett motsvarande absolut avstånd har ingen ytterligare effekt. Ange 0 för att stänga av förskjutningen." + # AI Translated msgid "Wipe before external loop" msgstr "Torka före yttre varv" @@ -18771,8 +18884,8 @@ msgid "No sparse layers (beta)" msgstr "Inga glesa lager (beta)" # AI Translated -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Om detta är aktiverat skrivs prime tornet inte ut på lager utan verktygsbyten. På lager med verktygsbyte flyttar extrudern nedåt för att skriva ut prime tornet. Användaren ansvarar för att det inte uppstår kollision med utskriften." +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Om detta är aktiverat skrivs prime tornet inte ut på lager utan verktygsbyten. På lager med ett verktygsbyte färdas extrudern nedåt för att skriva ut prime tornet, så att tornet hamnar under modellen och verktygshuvudet måste sträcka sig ned till det. Placeringar där detta skulle kollidera med ett redan utskrivet objekt avvisas. Har ingen effekt med jämn timelapse eller detektering av avlagringar på nozzeln, som kräver ett torn på varje lager." # AI Translated msgid "Prime all printing extruders" @@ -18800,6 +18913,34 @@ msgstr "" msgid "Cyclic" msgstr "Cyklisk" +# AI Translated +msgid "Cyclic order" +msgstr "Cyklisk ordning" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Anpassad filamentsekvens som används av den cykliska verktygsbytesordningen, som filamentnummer åtskilda med kommatecken (t.ex. \"3,2,1,4\").\n" +"Varje lager skriver ut sina filament enligt den här sekvensen; filament som inte anges skrivs ut sist, i stigande ordning.\n" +"Lämna tomt för att gå igenom filamenten i stigande ordning." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Tillämpa cyklisk ordning på första lagret" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Tillämpar den cykliska verktygsbytesordningen även på första lagret.\n" +"Detta är avstängt som standard, eftersom första lagret i stället ordnas för bästa vidhäftning mot byggplattan: filament som skriver ut små, ömtåliga detaljer i första lagret skrivs ut sist, så att efterföljande verktygsbyten och förflyttningar är mindre benägna att slå loss de svagt förankrade delarna. Den här ordningen för första lagret följer också en anpassad filamentsekvens för första lagret när en sådan är angiven. Fördelen med den cykliska ordningen (extra verktygsbyten ger varje lager mer tid att svalna) gäller inte första lagret, som skrivs ut långsamt och varmt för vidhäftningens skull.\n" +"Aktivera detta endast om du behöver exakt samma verktygssekvens på varje lager, inklusive det första, på bekostnad av den vidhäftningsoptimeringen." + msgid "Slice gap closing radius" msgstr "Bered spaltens stängningsradie" @@ -18809,9 +18950,6 @@ msgstr "Sprickor mindre än 2 x gap stängningsradie fylls under triangeln mesh msgid "Slicing Mode" msgstr "Berednings läge" -msgid "Other" -msgstr "Andra" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Använd ”Jämn-Udda” för 3DLabPrint flygplans modeller. Använd ”Stäng hål” för att stänga alla hål i modellen." @@ -19911,6 +20049,14 @@ msgstr "Ingen kontroll" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Utför inga giltighets kontroller, t.ex. kontroll av konflikter mellan G-kod och banor." +# AI Translated +msgid "Strict mode" +msgstr "Strikt läge" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Avslutar med en kod skild från noll när beredningen ger en icke-kritisk varning som annars bara loggas, till exempel en modell som behöver support medan support är avstängt. Använd detta i CI eller skriptade flöden som aldrig ska leverera en omärkligt trasig beredning. Varje sådan varning listas också med en stabil klass i arrayen `warnings` i result.json, som bara skrivs på Linux. Kan inte kombineras med --no-check, som hoppar över supportkontrollen." + msgid "Normative check" msgstr "Normativ kontroll" @@ -19923,11 +20069,28 @@ msgstr "Mata ut modell information" msgid "This outputs the model’s information." msgstr "Mata ut modellens information." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Inspektera mesh (JSON till stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Skriver en JSON-sammanfattning av varje inläst objekt till stdout och avslutar sedan: dess begränsningsboxar och de ytor på det konvexa höljet som det kan vila på, med deras normaler, areor och mittpunkter. Det är bland dessa ytor som alternativen --ground-* väljer. Maskinläsbart alternativ till --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Inspektera målning (JSON till stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Skriver en strukturerad JSON-sammanfattning av varje målat lager (support, söm, MMU-färg, ojämn yta) som redan är sparat på den inlästa modellen — antal facetter, ytarea och begränsningsbox i meshens koordinater per tillstånd — och avslutar sedan. Maskinläsbart alternativ till att öppna målningsverktygen i gränssnittet." + msgid "Export Settings" msgstr "Exportera inställningar" -msgid "This exports settings to a file." -msgstr "Exportera inställningar till en fil." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Detta exporterar inställningar till en fil. Använd - för att skriva dem till stdout." msgid "Send progress to pipe" msgstr "Skicka framsteg till röret (SLA)" @@ -19993,6 +20156,30 @@ msgstr "Rotera kring Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Rotationsvinkel kring Y-axeln i grader." +# AI Translated +msgid "Ground largest face" +msgstr "Lägg på största ytan" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Lägger varje objekt på den största ytan av dess konvexa hölje och släpper ned det på byggplattan. Av lika stora ytor behålls den som redan vetter nedåt. Objekt utan en yta som är stor nog att vila på lämnas som de är. Transformationer körs i kommandoradens ordning, så rotationer som anges före det här alternativet respekteras. --orient 1 körs efter alla transformationer och ersätter orienteringen." + +# AI Translated +msgid "Ground face by normal" +msgstr "Lägg på yta efter normal" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Lägger varje objekt på den yta av det konvexa höljet vars utåtriktade normal ligger närmast riktningen NX,NY,NZ och släpper ned det på byggplattan. Riktningen anges i objektets koordinater, som innefattar de rotationer som angetts före det här alternativet och som sammanfaller med byggplattans axlar om inte indatafilen roterar objektet. Till exempel ställer 1,0,0 objektet på sin +X-sida. --orient 1 körs efter alla transformationer och ersätter orienteringen." + +# AI Translated +msgid "Ground face at point" +msgstr "Lägg på yta vid punkt" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Lägger varje objekt på den yta av det konvexa höljet som innehåller punkten X,Y,Z och släpper ned det på byggplattan. Punkten anges i objektets koordinater, som innefattar de rotationer som angetts före det här alternativet; --inspect-mesh anger ytornas mittpunkter i dessa. Objekt utan en sådan yta lämnas som de är, och körningen misslyckas om inget objekt har någon. --orient 1 körs efter alla transformationer och ersätter orienteringen." + msgid "Scale the model by a float factor." msgstr "Skala modellen med en plus faktor" @@ -23583,14 +23770,17 @@ msgstr "Åtgärden kan inte ångras. Vill du fortsätta?" msgid "Skipping objects." msgstr "Hoppar över objekt." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Materialandel" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Modellhöjd" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Andel" msgid "Select Filament" msgstr "Välj filament" @@ -23906,12 +24096,14 @@ msgid "Drying-Dehumidifying" msgstr "Torkning – avfuktning" # AI Translated -msgid " maximum drying temperature is " -msgstr " maximal torktemperatur är " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Maximal torktemperatur för %s är %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " minimal torktemperatur är " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Minimal torktemperatur för %s är %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -24376,6 +24568,104 @@ msgstr "" "Undvik vridning\n" "Visste du att när du skriver ut material som är benägna att vrida, såsom ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten för vridning?" +#~ msgid "Other" +#~ msgstr "Andra" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Vänster: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Höger: " + +# AI Translated +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Maxtemperaturen får inte överstiga " + +# AI Translated +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Minimitemperaturen bör inte vara lägre än " + +#~ msgid "up to" +#~ msgstr "upp till" + +#~ msgid "above" +#~ msgstr "över" + +#~ msgid "from" +#~ msgstr "från" + +# AI Translated +#~ msgid "Configuration package: " +#~ msgstr "Konfigurationspaket: " + +# AI Translated +#~ msgid " updated to " +#~ msgstr " uppdaterat till " + +# AI Translated +#~ msgid "Grouping error: " +#~ msgstr "Grupperingsfel: " + +# AI Translated +#~ msgid " can not be placed in the " +#~ msgstr " kan inte placeras i " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " maximal torktemperatur är " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " minimal torktemperatur är " + +# AI Translated +#~ msgid "needs" +#~ msgstr "behöver" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "inte aktiverad" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "materialet är inte publicerat" + +#~ msgid "Select the language" +#~ msgstr "Välj språk" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Välj insticksmodul" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Riktning i vilken ovansidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n" +#~ "Utåt börjar i ytans mitt, så att överskottsmaterial trycks ut mot kanten där det syns minst. Inåt börjar vid kanten och slutar med de trånga kurvorna i mitten.\n" +#~ "Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Riktning i vilken undersidor fylls när ett centrumbaserat mönster används (Koncentrisk, Arkimediska kordor, Oktagramspiral).\n" +#~ "Inåt börjar varje yta med de bredare yttre kurvorna, vilket förbättrar det första lagrets vidhäftning på byggplattor där de trånga kurvorna i mitten kanske inte fastnar. Utåt börjar i mitten och trycker överskottsmaterial mot kanten.\n" +#~ "Standard använder ordning efter kortaste väg, vilken kan gå i endera riktningen." + +# AI Translated +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Om detta är aktiverat skrivs prime tornet inte ut på lager utan verktygsbyten. På lager med verktygsbyte flyttar extrudern nedåt för att skriva ut prime tornet. Användaren ansvarar för att det inte uppstår kollision med utskriften." + +#~ msgid "This exports settings to a file." +#~ msgstr "Exportera inställningar till en fil." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Liveview i Wayland kräver GStreamers GTK-videosink. Installera insticksmodulen gtksink för GStreamer och starta sedan om OrcaSlicer." diff --git a/localization/i18n/th/OrcaSlicer_th.po b/localization/i18n/th/OrcaSlicer_th.po index 2865914d23..410e3899dc 100644 --- a/localization/i18n/th/OrcaSlicer_th.po +++ b/localization/i18n/th/OrcaSlicer_th.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-06-19 13:40+0700\n" "Last-Translator: Icezaza\n" "Language-Team: Thai\n" @@ -2456,13 +2456,6 @@ msgstr "มีอัปเดตพร้อมใช้งาน เปิด msgid "%s has been removed." msgstr "ลบ %s แล้ว" - -msgid "Select the language" -msgstr "เลือกภาษา" - -msgid "Language" -msgstr "ภาษา" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3696,11 +3689,15 @@ msgstr "ดึงเส้นพลาสติกปัจจุบันกล msgid "Switch track at Filament Track Switch" msgstr "สลับแทร็กที่ Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "อุณหภูมิสูงสุดต้องไม่เกิน " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "อุณหภูมิสูงสุดต้องไม่เกิน %d" -msgid "The minmum temperature should not be less than " -msgstr "อุณหภูมิต่ำสุดไม่ควรต่ำกว่า" +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "อุณหภูมิต่ำสุดไม่ควรต่ำกว่า %d" msgid "Type to filter..." msgstr "พิมพ์เพื่อกรอง..." @@ -4582,6 +4579,15 @@ msgstr "" "การคัดลอก G-code ชั่วคราวไปยังเอาต์พุต G-code ล้มเหลว บางทีการ์ด SD อาจถูกล็อคการเขียน?\n" "ข้อความแสดงข้อผิดพลาด: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"การคัดลอก G-code ชั่วคราวไปยัง G-code ผลลัพธ์ล้มเหลว\n" +"ข้อความแสดงข้อผิดพลาด: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "การคัดลอก G-code ชั่วคราวไปยังเอาต์พุต G-code ล้มเหลว อาจมีปัญหากับอุปกรณ์เป้าหมาย โปรดลองส่งออกอีกครั้งหรือใช้อุปกรณ์อื่น G-code เอาต์พุตที่เสียหายอยู่ที่ %1%.tmp" @@ -5318,10 +5324,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "ค่า %s อยู่นอกช่วง ช่วงที่ถูกต้องคือตั้งแต่ %d ถึง %d" #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"มันคือ %s%% หรือ %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "มันคือ %s%% หรือ %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5347,22 +5354,18 @@ msgstr "รูปแบบไม่ถูกต้อง รูปแบบเ msgid "System agents" msgstr "เอเจนต์ระบบ" -# AI Translated -msgid "No plugin selected" -msgstr "ไม่ได้เลือกปลั๊กอิน" - # AI Translated msgid "Add plugin" msgstr "เพิ่มปลั๊กอิน" -# AI Translated -msgid "Select plugin" -msgstr "เลือกปลั๊กอิน" - # AI Translated msgid "Remove plugin" msgstr "ลบปลั๊กอิน" +# AI Translated +msgid "No plugin selected" +msgstr "ไม่ได้เลือกปลั๊กอิน" + # AI Translated msgid "Configure" msgstr "กำหนดค่า" @@ -5618,14 +5621,20 @@ msgstr "ตั้งค่าให้เหมาะสมที่สุด" msgid "Regroup filament" msgstr "จัดกลุ่มเส้นพลาสติกใหม่" -msgid "up to" -msgstr "สูงสุด" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "สูงสุด %1% มม." -msgid "above" -msgstr "ข้างบน" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "สูงกว่า %1% มม." -msgid "from" -msgstr "จาก" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "จาก %1% ถึง %2% มม." msgid "Usage" msgstr "การใช้งาน" @@ -5986,7 +5995,7 @@ msgstr "ปริมาณ:" msgid "Size:" msgstr "ขนาด:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "พบความขัดแย้งของเส้นทางรหัส G ที่เลเยอร์ %d, Z = %.2lfmm โปรดแยกวัตถุที่ขัดแย้งกันให้ไกลออกไป (%s <-> %s)" @@ -6298,11 +6307,13 @@ msgstr "บันทึกโปรเจกต์เป็น" msgid "Save current project as" msgstr "บันทึกโครงการปัจจุบันเป็น" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "เผยแพร่ 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "ส่งออกไฟล์ 3MF ที่ฝังการตั้งค่าที่เลือกไว้" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "นำเข้า 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7558,6 +7569,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "ล่าง" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "การตั้งค่านี้ไม่ได้ระบุชนิดความสามารถของปลั๊กอิน" + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "การตั้งค่านี้ระบุชนิดความสามารถของปลั๊กอินที่ไม่รู้จัก: " + # AI Translated msgid "Plugin Selection" msgstr "การเลือกปลั๊กอิน" @@ -8118,11 +8137,13 @@ msgstr "โปรดยืนยันว่ารหัส G ภายในค msgid "Customized Preset" msgstr "ค่าที่ตั้งไว้ล่วงหน้าที่กำหนดเอง" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "ไม่สามารถใช้การตั้งค่าที่เผยแพร่บางรายการได้:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "ช่องเส้นพลาสติกบางช่องถูกเปลี่ยนแปลง:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "ชื่อของส่วนประกอบภายในไฟล์ STEP ไม่ใช่รูปแบบ UTF-8!" @@ -8531,13 +8552,17 @@ msgstr "บันทึกไฟล์ที่สไลซ์เป็น:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "ไฟล์ %s ถูกส่งไปยังพื้นที่เก็บข้อมูลของเครื่องพิมพ์แล้ว และสามารถดูได้บนเครื่องพิมพ์" +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "เผยแพร่ไฟล์ 3MF เป็น:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"ส่งออกไฟล์ 3MF ที่เผยแพร่ล้มเหลว\n" +"โปรดตรวจสอบว่าโฟลเดอร์นั้นมีอยู่บนออนไลน์หรือมีโปรแกรมอื่นเปิดไฟล์นี้ค้างไว้หรือไม่" msgid "Publish" msgstr "เผยแพร่" @@ -8752,7 +8777,6 @@ msgstr "ต้องการดำเนินการต่อหรือไ msgid "Language selection" msgstr "การเลือกภาษา" - msgid "Asia-Pacific" msgstr "เอเชียแปซิฟิก" @@ -8857,6 +8881,9 @@ msgstr "เส้นทางอินสแตนซ์ปัจจุบัน msgid "General" msgstr "ทั่วไป" +msgid "Language" +msgstr "ภาษา" + msgid "Metric" msgstr "เมตริก" @@ -9295,9 +9322,6 @@ msgstr "เมื่อเลื่อนแถบเลเยอร์ในต msgid "Dimmed layer brightness" msgstr "ความสว่างของเลเยอร์ที่หรี่" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9697,63 +9721,80 @@ msgstr "กำลังอัพโหลดข้อมูล" msgid "Jump to webpage" msgstr "ข้ามไปที่หน้าเว็บ" +# AI Translated msgid "Material" -msgstr "" +msgstr "วัสดุ" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "เส้นพลาสติกผสม" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "เส้นพลาสติกผสมบางรายการต้องอาศัยเส้นพลาสติกที่จะไม่ถูกเผยแพร่:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "เส้นพลาสติก %d (ผสม)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% ต้องใช้ %2% แต่ยังไม่ได้เปิดใช้" -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% ต้องใช้ %2% แต่วัสดุของมันจะไม่ถูกเผยแพร่" +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "หากต้องการเผยแพร่เส้นพลาสติกผสม ให้เปิดใช้เส้นพลาสติกทุกเส้นที่ใช้ แล้วเลือกการเผยแพร่แบบเต็ม หรือทำตามข้อกำหนดชนิดของมัน" +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "เผยแพร่ต่อไป" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "เผยแพร่ 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "เลือกว่าจะเผยแพร่การตั้งค่าใดในไฟล์ 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "วิกิการเผยแพร่ 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "คู่มือวีดีโอการเผยแพร่ 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "เส้นพลาสติกผสม - เผยแพร่ทั้งชุดเมื่อเลือก \"เปิดใช้\" ด้านบน" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "เผยแพร่เส้นพลาสติกผสมนี้ และเปิดใช้ + เผยแพร่แบบเต็มสำหรับเส้นพลาสติกที่เป็นส่วนประกอบ" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "เผยแพร่ช่องเส้นพลาสติกนี้ในไฟล์ 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "การเผยแพร่แบบเต็ม" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "ฝังเส้นพลาสติกทั้งหมดของช่องนี้ลงในไฟล์ 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "กรองรายการที่ไม่ได้เลือก" #, c-format, boost-format msgid "Save %s as" @@ -9772,6 +9813,10 @@ msgstr "คัดลอกค่าที่สืบทอดมาจากพ msgid "Detach from parent" msgstr "แยกออกจากพรีเซ็ตแม่" +# AI Translated +msgid "Save without parent" +msgstr "บันทึกโดยไม่มีพรีเซ็ตแม่" + # AI Translated msgid "Unique preset" msgstr "พรีเซ็ตอิสระ" @@ -10476,9 +10521,17 @@ msgstr "จำเป็นต้องใช้ Prime Tower ในการต msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "การเปิดใช้งานทั้งความสูง Z ที่แม่นยำและ Prime Tower อาจทำให้เกิดข้อผิดพลาดในการแบ่งส่วน คุณยังต้องการเปิดใช้งานความสูง Z ที่แม่นยำหรือไม่" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "ไทม์แลปส์แบบราบรื่นต้องมี Prime Tower ในทุกเลเยอร์ ซึ่งใช้ร่วมกับ \"ไม่มีชั้นกระจัดกระจาย\" ไม่ได้ จึงปิด \"ไม่มีชั้นกระจัดกระจาย\" แล้ว" + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "จำเป็นต้องใช้ Prime Tower สำหรับโหมดไทม์แลปส์แบบราบรื่น หากไม่มี Prime Tower อาจเกิดตำหนิบนโมเดลได้ ต้องการเปิดใช้ Prime Tower หรือไม่?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"ไม่มีชั้นกระจัดกระจาย\" ใช้ร่วมกับไทม์แลปส์แบบราบรื่นไม่ได้ เพราะไทม์แลปส์แบบราบรื่นต้องมี Prime Tower ในทุกเลเยอร์ ไทม์แลปส์จึงถูกสลับเป็นโหมดแบบดั้งเดิม" + msgid "Still print by object?" msgstr "ยังคงพิมพ์ตามวัตถุใช่ไหม" @@ -10847,9 +10900,6 @@ msgstr "โปรไฟล์กระบวนการที่เข้าก msgid "Printable space" msgstr "พื้นที่ที่สามารถพิมพ์ได้" -msgid "Printer Agent" -msgstr "ตัวแทนเครื่องพิมพ์" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "เลือกการใช้งานตัวแทนเครือข่ายสำหรับการสื่อสารของเครื่องพิมพ์ ตัวแทนที่มีอยู่จะได้รับการลงทะเบียนเมื่อเริ่มต้น" @@ -11250,14 +11300,6 @@ msgstr "จำนวนชุดดันเส้น" msgid "Capabilities" msgstr "ความสามารถ" -# AI Translated -msgid "Left: " -msgstr "ซ้าย: " - -# AI Translated -msgid "Right: " -msgstr "ขวา: " - msgid "Show all presets (including incompatible)" msgstr "แสดงค่าที่ตั้งล่วงหน้าทั้งหมด (รวมทั้งเข้ากันไม่ได้)" @@ -12096,15 +12138,22 @@ msgstr "ยกเลิกการซ่อมแล้ว" msgid "Copying of file %1% to %2% failed: %3%" msgstr "การคัดลอกไฟล์ %1% ถึง %2% ล้มเหลว: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "กำลังดาวน์โหลดโปรไฟล์ผู้ขายใหม่: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "แพคเกจการกำหนดค่า: %1% อัปเดตเป็น %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "ดาวน์โหลดโปรไฟล์ผู้ขายล้มเหลว: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "โปรดตรวจสอบการเปลี่ยนแปลงที่ยังไม่ได้บันทึกก่อนอัปเดตการกำหนดค่า" -msgid "Configuration package: " -msgstr "แพคเกจการกำหนดค่า:" - -msgid " updated to " -msgstr "อัปเดตเป็น" - msgid "Open G-code file:" msgstr "เปิดไฟล์ G-code:" @@ -12162,11 +12211,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "รูปร่างอินพุตรองรับเฉพาะ Klipper, RepRapFirmware และ Marlin 2 เท่านั้น" -msgid "Grouping error: " -msgstr "ข้อผิดพลาดในการจัดกลุ่ม:" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "ข้อผิดพลาดในการจัดกลุ่ม: %1% ไม่สามารถวางในหัวฉีดซ้ายได้" -msgid " can not be placed in the " -msgstr "ไม่สามารถวางใน" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "ข้อผิดพลาดในการจัดกลุ่ม: %1% ไม่สามารถวางในหัวฉีดขวาได้" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12280,6 +12333,10 @@ msgstr "%1% อยู่ใกล้ผู้อื่นมากเกิน msgid "%1% is too tall, and collisions will be caused." msgstr "%1% สูงเกินไป และจะเกิดการชนกัน" +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "ตำแหน่งสัมพัทธ์ของโมเดลกับ Prime Tower ไม่เป็นไปตามข้อกำหนดของฟังก์ชัน \"ไม่มีชั้นกระจัดกระจาย\" โปรดปรับตำแหน่งสัมพัทธ์ของทั้งสอง ลดความสูงของโมเดล หรือปิด \"ไม่มีชั้นกระจัดกระจาย\"" + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "อยู่ใกล้พื้นที่แยกมากเกินไป อาจเกิดการชนกันเมื่อพิมพ์" @@ -12625,6 +12682,9 @@ msgstr "ใช้ 3MF แทน G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "เปิดใช้งานหากเครื่องพิมพ์รับไฟล์ 3MF เป็นงานพิมพ์ เมื่อเปิดใช้งาน OrcaSlicer จะส่งไฟล์ที่สไลซ์แล้วเป็น .gcode.3mf แทนไฟล์ .gcode ธรรมดา" +msgid "Printer Agent" +msgstr "ตัวแทนเครื่องพิมพ์" + msgid "Select the network agent implementation for printer communication." msgstr "เลือกการใช้งานตัวแทนเครือข่ายสำหรับการสื่อสารของเครื่องพิมพ์" @@ -13670,6 +13730,10 @@ msgstr "จัดแนวเป็นเส้นตรง" msgid "Concentric" msgstr "ศูนย์กลาง" +# AI Translated +msgid "Spiral Inset" +msgstr "เกลียวเข้าใน" + msgid "Hilbert Curve" msgstr "ฮิลเบิร์ต เคิร์ฟ" @@ -13761,13 +13825,13 @@ msgstr "ลำดับการเติมพื้นผิวด้านบ # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"ทิศทางที่พื้นผิวด้านบนถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n" -"ออกด้านนอกเริ่มที่กึ่งกลางของพื้นผิว ดังนั้นวัสดุส่วนเกินจะถูกดันไปทางขอบซึ่งมองเห็นได้น้อยที่สุด เข้าด้านในเริ่มที่ขอบและจบด้วยเส้นโค้งแคบที่กึ่งกลาง\n" -"ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้" +"ทิศทางการเติมผิวด้านบนเมื่อใช้รูปแบบที่เริ่มจากศูนย์กลาง (ศูนย์กลาง, เกลียวเข้าใน, คอร์ดอาร์คิมีดีน, เกลียวแปดเหลี่ยม)\n" +"ออกด้านนอกจะเริ่มที่กึ่งกลางของผิว วัสดุส่วนเกินจึงถูกดันไปทางขอบซึ่งมองเห็นได้น้อยที่สุด เข้าด้านในจะเริ่มที่ขอบและจบด้วยเส้นโค้งแคบตรงกึ่งกลาง\n" +"ค่าเริ่มต้นใช้การเรียงตามเส้นทางที่สั้นที่สุด ซึ่งอาจเดินไปทางใดก็ได้" # AI Translated msgid "Bottom surface fill order" @@ -13775,13 +13839,13 @@ msgstr "ลำดับการเติมพื้นผิวด้านล # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"ทิศทางที่พื้นผิวด้านล่างถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n" -"เข้าด้านในเริ่มแต่ละพื้นผิวด้วยเส้นโค้งด้านนอกที่กว้างกว่า ซึ่งช่วยเพิ่มการยึดเกาะเลเยอร์แรกบนฐานพิมพ์ที่เส้นโค้งแคบตรงกลางอาจไม่ติด ออกด้านนอกเริ่มที่กึ่งกลาง โดยดันวัสดุส่วนเกินไปทางขอบ\n" -"ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้" +"ทิศทางการเติมผิวด้านล่างเมื่อใช้รูปแบบที่เริ่มจากศูนย์กลาง (ศูนย์กลาง, เกลียวเข้าใน, คอร์ดอาร์คิมีดีน, เกลียวแปดเหลี่ยม)\n" +"เข้าด้านในจะเริ่มแต่ละผิวด้วยเส้นโค้งด้านนอกที่กว้างกว่า ซึ่งช่วยให้ชั้นแรกยึดเกาะดีขึ้นบนฐานพิมพ์ที่เส้นโค้งแคบตรงกึ่งกลางอาจไม่ติด ออกด้านนอกจะเริ่มที่กึ่งกลางและดันวัสดุส่วนเกินไปทางขอบ\n" +"ค่าเริ่มต้นใช้การเรียงตามเส้นทางที่สั้นที่สุด ซึ่งอาจเดินไปทางใดก็ได้" msgid "Internal solid infill pattern" msgstr "รูปแบบไส้ในของแข็งภายใน" @@ -13884,6 +13948,14 @@ msgstr "ทวนเข็มนาฬิกา" msgid "Clockwise" msgstr "ตามเข็มนาฬิกา" +# AI Translated +msgid "Distance to rod" +msgstr "ระยะถึงแกน" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "ระยะในแนวนอนจากปลายหัวฉีดถึงขอบด้านไกลของแกน ใช้สำหรับหลีกเลี่ยงการชนในการพิมพ์ตามวัตถุ" + msgid "Height to rod" msgstr "ความสูงถึงก้าน" @@ -16053,6 +16125,20 @@ msgstr "ตรวจจับผนังส่วนยื่น" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "ตรวจจับเปอร์เซ็นต์ระยะยื่นที่สัมพันธ์กับความกว้างของเส้น และใช้ความเร็วที่แตกต่างกันในการพิมพ์ สำหรับระยะยื่น 100%% จะใช้ความเร็วบริดจ์" +# AI Translated +msgid "Print unsupported walls last" +msgstr "พิมพ์ผนังที่ไม่มีส่วนรองรับเป็นลำดับสุดท้าย" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"รอบผนังที่ลอยอยู่กลางอากาศทั้งวงจะถูกพิมพ์ก็ต่อเมื่อมีสิ่งที่รองรับมันได้แล้ว:\n" +"โดยจะถูกอัดขึ้นรูปหลังผนังอื่น ๆ ของเกาะเดียวกัน เริ่มจากวงในสุด ไม่ว่าลำดับผนังจะเป็นแบบใด\n" +"รอบที่มีเพียงสะพานของเลเยอร์นี้เท่านั้นที่ยึดไว้ได้จะรอจนกว่าสะพานเหล่านั้นจะถูกพิมพ์ ส่วนรอบที่วิ่งขนานไปกับผนังที่มีส่วนรองรับจะยังคงอยู่ก่อนไส้ใน ซึ่งต้องใช้มันเป็นจุดยึด" + msgid "Outer walls" msgstr "ผนังชั้นนอก" @@ -16490,6 +16576,39 @@ msgstr "เช็ดบนลูป" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "เพื่อลดการมองเห็นรอยต่อในการอัดรีดแบบวงปิด จะมีการเคลื่อนตัวเข้าด้านในเล็กน้อยก่อนที่ชุดดันเส้นจะออกจากวง" +# AI Translated +msgid "Wipe inward" +msgstr "เช็ดเข้าด้านใน" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"ใช้กับผนังด้านนอกเท่านั้น รวมถึงขอบรู โดยจะขยับหัวฉีดที่ร้อนเข้าหาผนังด้านในที่พิมพ์ไปแล้วระหว่างการเช็ด เพื่อลดการให้ความร้อนซ้ำแก่พลาสติกที่เพิ่งพิมพ์และลดรอยตะเข็บ\n" +"\n" +"มีประโยชน์เป็นพิเศษที่ความสูงเลเยอร์ต่ำกว่า 0.1 มม. ซึ่งรอยเช็ดจะเห็นได้ชัดกว่า\n" +"\n" +"จะใช้การเช็ดแบบปกติหากยังไม่มีผนังด้านในที่อยู่ติดกันถูกพิมพ์ (พื้นที่ผนังเดี่ยว หรือลำดับผนังแบบด้านนอก/ด้านใน) หรือหากหาเส้นทางเข้าด้านในที่มีส่วนรองรับไม่ได้ เช่น ที่มุมแคบหรือช่องว่างของรอยตะเข็บ" + +# AI Translated +msgid "Wipe inward distance" +msgstr "ระยะเช็ดเข้าด้านใน" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"ระยะที่เส้นทางการเช็ดถูกเลื่อนออกจากเส้นรอบรูปด้านนอก ระบุเป็นมิลลิเมตรหรือเป็นเปอร์เซ็นต์ของความกว้างการอัดขึ้นรูปจริงของผนังด้านนอก\n" +"\n" +"ตัวอย่างเช่น 50% จะเลื่อนเส้นทางไปครึ่งหนึ่งของความกว้างผนังด้านนอก ระยะเลื่อนที่มีผลจริงถูกจำกัดทั้งโดยความกว้างจริงของผนังด้านนอกและโดยช่องว่างที่มีถึงผนังที่อยู่ติดกัน ดังนั้นค่าที่เกิน 100% หรือระยะสัมบูรณ์ที่เทียบเท่าจะไม่ให้ผลเพิ่มเติม ตั้งเป็น 0 เพื่อปิดการเลื่อน" + msgid "Wipe before external loop" msgstr "เช็ดก่อนวนรอบภายนอก" @@ -16751,8 +16870,9 @@ msgstr "รับเครื่องมือใหม่โดยไม่ร msgid "No sparse layers (beta)" msgstr "ไม่มีชั้นกระจัดกระจาย (เบต้า)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "หากเปิดใช้งาน Wipe Tower จะไม่ถูกพิมพ์บนเลเยอร์โดยไม่มีการเปลี่ยนแปลงเครื่องมือ บนเลเยอร์ที่มีการเปลี่ยนเครื่องมือ ชุดดันเส้นจะเคลื่อนลงด้านล่างเพื่อพิมพ์ Wipe Tower ผู้ใช้มีหน้าที่รับผิดชอบในการตรวจสอบให้แน่ใจว่าไม่มีการชนกันกับงานพิมพ์" +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "หากเปิดใช้ Wipe Tower จะไม่ถูกพิมพ์ในเลเยอร์ที่ไม่มีการเปลี่ยนเครื่องมือ ในเลเยอร์ที่มีการเปลี่ยนเครื่องมือ ชุดดันเส้นจะเคลื่อนลงไปพิมพ์ Wipe Tower ทำให้หอคอยอยู่ต่ำกว่าโมเดลและหัวพิมพ์ต้องยื่นลงไปหามัน การจัดวางที่จะทำให้ชนกับวัตถุที่พิมพ์ไปแล้วจะถูกปฏิเสธ ไม่มีผลเมื่อใช้ไทม์แลปส์แบบราบรื่นหรือการตรวจจับการจับตัวเป็นก้อนที่หัวฉีด ซึ่งต้องมีหอคอยในทุกเลเยอร์" msgid "Prime all printing extruders" msgstr "ใช้ชุดดันเส้นการพิมพ์ทั้งหมด" @@ -16778,6 +16898,34 @@ msgstr "" msgid "Cyclic" msgstr "Cyclic" +# AI Translated +msgid "Cyclic order" +msgstr "ลำดับแบบวนรอบ" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"ลำดับเส้นพลาสติกที่กำหนดเอง ซึ่งใช้โดยการจัดลำดับการเปลี่ยนเครื่องมือแบบวนรอบ ระบุเป็นหมายเลขเส้นพลาสติกคั่นด้วยเครื่องหมายจุลภาค (เช่น \"3,2,1,4\")\n" +"แต่ละเลเยอร์จะพิมพ์เส้นพลาสติกของตนตามลำดับนี้ ส่วนเส้นพลาสติกที่ไม่ได้ระบุไว้จะถูกพิมพ์เป็นลำดับสุดท้ายโดยเรียงจากน้อยไปมาก\n" +"เว้นว่างไว้เพื่อวนใช้เส้นพลาสติกโดยเรียงจากน้อยไปมาก" + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "ใช้ลำดับแบบวนรอบกับชั้นแรก" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"ใช้ลำดับการเปลี่ยนเครื่องมือแบบวนรอบกับชั้นแรกด้วย\n" +"โดยค่าเริ่มต้นจะปิดอยู่ เพราะชั้นแรกจะถูกจัดลำดับเพื่อการยึดเกาะฐานพิมพ์ที่ดีที่สุดแทน กล่าวคือ เส้นพลาสติกที่พิมพ์รายละเอียดเล็กและเปราะบางของชั้นแรกจะถูกพิมพ์เป็นลำดับสุดท้าย การเปลี่ยนเครื่องมือและการเดินหัวเปล่าที่ตามมาจึงมีโอกาสน้อยลงที่จะกระแทกชิ้นส่วนที่ยึดเกาะไม่แน่นเหล่านั้นให้หลุด ลำดับของชั้นแรกนี้ยังเคารพลำดับเส้นพลาสติกของชั้นแรกที่กำหนดเองด้วย หากมีการตั้งค่าไว้ ข้อดีของลำดับแบบวนรอบ (การเปลี่ยนเครื่องมือที่เพิ่มขึ้นทำให้แต่ละเลเยอร์มีเวลาเย็นตัวมากขึ้น) ไม่ใช้กับชั้นแรก ซึ่งพิมพ์อย่างช้าและร้อนเพื่อการยึดเกาะ\n" +"เปิดใช้สิ่งนี้เฉพาะเมื่อคุณต้องการลำดับเครื่องมือที่เหมือนกันทุกประการในทุกเลเยอร์รวมถึงชั้นแรก โดยยอมแลกกับการปรับแต่งการยึดเกาะดังกล่าว" + msgid "Slice gap closing radius" msgstr "รัศมีการปิดช่องว่างของ Slice" @@ -16787,9 +16935,6 @@ msgstr "รอยแตกร้าวที่มีขนาดเล็กก msgid "Slicing Mode" msgstr "โหมดการแบ่งส่วน" -msgid "Other" -msgstr "อื่นๆ" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "ใช้ \"เลขคู่\" สำหรับโมเดลเครื่องบิน 3DLabPrint ใช้ \"ปิดรู\" เพื่อปิดรูทั้งหมดในโมเดล" @@ -17791,6 +17936,14 @@ msgstr "ไม่มีเช็ค" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "อย่าทำการตรวจสอบความถูกต้องใดๆ เช่น การตรวจสอบข้อขัดแย้งของเส้นทาง G-code" +# AI Translated +msgid "Strict mode" +msgstr "โหมดเข้มงวด" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "ออกจากโปรแกรมด้วยค่าที่ไม่ใช่ศูนย์เมื่อการสไลซ์เกิดคำเตือนที่ไม่ร้ายแรง ซึ่งปกติจะถูกบันทึกลงล็อกเท่านั้น เช่น โมเดลที่ต้องการส่วนรองรับขณะที่ปิดส่วนรองรับไว้ ใช้สิ่งนี้ใน CI หรือไปป์ไลน์ที่ทำงานด้วยสคริปต์ซึ่งต้องไม่ส่งมอบผลการสไลซ์ที่เสียหายแบบสังเกตยาก คำเตือนแต่ละรายการดังกล่าวยังถูกแสดงพร้อมคลาสที่คงที่ในอาร์เรย์ `warnings` ของ result.json ซึ่งเขียนเฉพาะบน Linux เท่านั้น ใช้ร่วมกับ --no-check ไม่ได้ เพราะตัวเลือกนั้นข้ามการตรวจสอบส่วนรองรับ" + msgid "Normative check" msgstr "การตรวจสอบเชิงบรรทัดฐาน" @@ -17803,11 +17956,28 @@ msgstr "ข้อมูลรุ่นเอาท์พุต" msgid "This outputs the model’s information." msgstr "ส่งออกข้อมูลของโมเดล" +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "ตรวจสอบเมช (JSON ไปยัง stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "พิมพ์สรุป JSON ของแต่ละวัตถุที่โหลดไว้ไปยัง stdout แล้วออกจากโปรแกรม: กล่องขอบเขตของวัตถุและหน้าของเปลือกนูนที่วัตถุสามารถวางลงได้ พร้อมเวกเตอร์ตั้งฉาก พื้นที่ และจุดศูนย์กลางของหน้าเหล่านั้น หน้าเหล่านี้คือหน้าที่ตัวเลือก --ground-* เลือกใช้ เป็นทางเลือกที่เครื่องอ่านได้แทน --info" + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "ตรวจสอบการระบาย (JSON ไปยัง stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "พิมพ์สรุป JSON แบบมีโครงสร้างของทุกเลเยอร์ที่ระบายไว้ (ส่วนรองรับ, รอยตะเข็บ, สี MMU, ผิวฟัซซี) ซึ่งถูกเก็บไว้ในโมเดลที่โหลดแล้ว — จำนวนหน้า พื้นที่ผิว และกล่องขอบเขตในพิกัดของเมชในแต่ละสถานะ — แล้วออกจากโปรแกรม เป็นทางเลือกที่เครื่องอ่านได้แทนการเปิดเครื่องมือระบายในหน้าจอ" + msgid "Export Settings" msgstr "ส่งออกการตั้งค่า" -msgid "This exports settings to a file." -msgstr "ส่งออกการตั้งค่าไปยังไฟล์" +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "คำสั่งนี้ส่งออกการตั้งค่าไปยังไฟล์ ใช้ - เพื่อเขียนไปยัง stdout" msgid "Send progress to pipe" msgstr "ส่งความคืบหน้าไปป์" @@ -17863,6 +18033,30 @@ msgstr "หมุนรอบ Y" msgid "Rotation angle around the Y axis in degrees." msgstr "มุมการหมุนรอบแกน Y มีหน่วยเป็นองศา" +# AI Translated +msgid "Ground largest face" +msgstr "วางบนหน้าที่ใหญ่ที่สุด" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "วางแต่ละวัตถุลงบนหน้าที่ใหญ่ที่สุดของเปลือกนูน แล้วปล่อยลงบนฐานพิมพ์ ในบรรดาหน้าที่ใหญ่เท่ากัน จะคงหน้าที่หันลงอยู่แล้วไว้ วัตถุที่ไม่มีหน้าใหญ่พอให้วางได้จะถูกปล่อยไว้ตามเดิม การแปลงรูปทำงานตามลำดับในบรรทัดคำสั่ง การหมุนที่ระบุไว้ก่อนตัวเลือกนี้จึงถูกนำมาใช้ด้วย --orient 1 ทำงานหลังการแปลงรูปทั้งหมดและจะแทนที่การจัดวางแนว" + +# AI Translated +msgid "Ground face by normal" +msgstr "วางบนหน้าตามเวกเตอร์ตั้งฉาก" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "วางแต่ละวัตถุลงบนหน้าของเปลือกนูนที่มีเวกเตอร์ตั้งฉากด้านนอกใกล้เคียงทิศทาง NX,NY,NZ มากที่สุด แล้วปล่อยลงบนฐานพิมพ์ ทิศทางนี้อยู่ในพิกัดของวัตถุ ซึ่งรวมการหมุนที่ระบุไว้ก่อนตัวเลือกนี้ และตรงกับแกนของฐานพิมพ์ เว้นแต่ไฟล์นำเข้าจะหมุนวัตถุไว้ ตัวอย่างเช่น 1,0,0 จะตั้งวัตถุขึ้นบนด้าน +X --orient 1 ทำงานหลังการแปลงรูปทั้งหมดและจะแทนที่การจัดวางแนว" + +# AI Translated +msgid "Ground face at point" +msgstr "วางบนหน้าที่จุดที่ระบุ" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "วางแต่ละวัตถุลงบนหน้าของเปลือกนูนที่มีจุด X,Y,Z อยู่ แล้วปล่อยลงบนฐานพิมพ์ จุดนี้อยู่ในพิกัดของวัตถุ ซึ่งรวมการหมุนที่ระบุไว้ก่อนตัวเลือกนี้ โดย --inspect-mesh รายงานจุดศูนย์กลางของหน้าในพิกัดเดียวกันนี้ วัตถุที่ไม่มีหน้าดังกล่าวจะถูกปล่อยไว้ตามเดิม และการทำงานจะล้มเหลวหากไม่มีวัตถุใดมีหน้าเช่นนั้นเลย --orient 1 ทำงานหลังการแปลงรูปทั้งหมดและจะแทนที่การจัดวางแนว" + msgid "Scale the model by a float factor." msgstr "ปรับขนาดโมเดลตามปัจจัยโฟลต" @@ -20961,14 +21155,17 @@ msgstr "การทำงานนี้ไม่สามารถย้อน msgid "Skipping objects." msgstr "ข้ามวัตถุ" +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "สัดส่วนวัสดุ" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "ความสูงโมเดล" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "สัดส่วน" msgid "Select Filament" msgstr "เลือกเส้นพลาสติก" @@ -21226,12 +21423,14 @@ msgid "Drying-Dehumidifying" msgstr "อบแห้ง-ลดความชื้น" # AI Translated -msgid " maximum drying temperature is " -msgstr " อุณหภูมิอบแห้งสูงสุดคือ " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "อุณหภูมิอบแห้งสูงสุดของ %s คือ %d°C" # AI Translated -msgid " minimum drying temperature is " -msgstr " อุณหภูมิอบแห้งต่ำสุดคือ " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "อุณหภูมิอบแห้งต่ำสุดของ %s คือ %d°C" # AI Translated msgid "This filament may not be completely dried." @@ -21676,6 +21875,97 @@ msgstr "" "หลีกเลี่ยงการบิดเบี้ยว\n" "คุณรู้หรือไม่ว่าเมื่อพิมพ์วัสดุที่มีแนวโน้มที่จะเกิดการบิดเบี้ยว เช่น ABS การเพิ่มอุณหภูมิฐานพิมพ์อย่างเหมาะสมสามารถลดความน่าจะเป็นของการบิดเบี้ยวได้" +#~ msgid "Other" +#~ msgstr "อื่นๆ" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "ซ้าย: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "ขวา: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "อุณหภูมิสูงสุดต้องไม่เกิน " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "อุณหภูมิต่ำสุดไม่ควรต่ำกว่า" + +#~ msgid "up to" +#~ msgstr "สูงสุด" + +#~ msgid "above" +#~ msgstr "ข้างบน" + +#~ msgid "from" +#~ msgstr "จาก" + +#~ msgid "Configuration package: " +#~ msgstr "แพคเกจการกำหนดค่า:" + +#~ msgid " updated to " +#~ msgstr "อัปเดตเป็น" + +#~ msgid "Grouping error: " +#~ msgstr "ข้อผิดพลาดในการจัดกลุ่ม:" + +#~ msgid " can not be placed in the " +#~ msgstr "ไม่สามารถวางใน" + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " อุณหภูมิอบแห้งสูงสุดคือ " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " อุณหภูมิอบแห้งต่ำสุดคือ " + +# AI Translated +#~ msgid "needs" +#~ msgstr "ต้องการ" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "ไม่ได้เปิดใช้" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "วัสดุยังไม่ถูกเผยแพร่" + +#~ msgid "Select the language" +#~ msgstr "เลือกภาษา" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "เลือกปลั๊กอิน" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "ทิศทางที่พื้นผิวด้านบนถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n" +#~ "ออกด้านนอกเริ่มที่กึ่งกลางของพื้นผิว ดังนั้นวัสดุส่วนเกินจะถูกดันไปทางขอบซึ่งมองเห็นได้น้อยที่สุด เข้าด้านในเริ่มที่ขอบและจบด้วยเส้นโค้งแคบที่กึ่งกลาง\n" +#~ "ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้" + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "ทิศทางที่พื้นผิวด้านล่างถูกเติมเมื่อใช้ลวดลายแบบอิงจุดศูนย์กลาง (Concentric, Archimedean Chords, Octagram Spiral)\n" +#~ "เข้าด้านในเริ่มแต่ละพื้นผิวด้วยเส้นโค้งด้านนอกที่กว้างกว่า ซึ่งช่วยเพิ่มการยึดเกาะเลเยอร์แรกบนฐานพิมพ์ที่เส้นโค้งแคบตรงกลางอาจไม่ติด ออกด้านนอกเริ่มที่กึ่งกลาง โดยดันวัสดุส่วนเกินไปทางขอบ\n" +#~ "ค่าเริ่มต้นใช้การเรียงลำดับเส้นทางสั้นที่สุด ซึ่งอาจทำงานในทิศทางใดก็ได้" + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "หากเปิดใช้งาน Wipe Tower จะไม่ถูกพิมพ์บนเลเยอร์โดยไม่มีการเปลี่ยนแปลงเครื่องมือ บนเลเยอร์ที่มีการเปลี่ยนเครื่องมือ ชุดดันเส้นจะเคลื่อนลงด้านล่างเพื่อพิมพ์ Wipe Tower ผู้ใช้มีหน้าที่รับผิดชอบในการตรวจสอบให้แน่ใจว่าไม่มีการชนกันกับงานพิมพ์" + +#~ msgid "This exports settings to a file." +#~ msgstr "ส่งออกการตั้งค่าไปยังไฟล์" + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Native Wayland liveview ต้องใช้ GStreamer GTK video sink โปรดติดตั้งปลั๊กอิน gtksink สำหรับ GStreamer จากนั้นรีสตาร์ท OrcaSlicer" diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index a5c11f5300..39ca72ae0f 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-08-21 23:18+0300\n" "Last-Translator: GlauTech\n" "Language-Team: \n" @@ -2480,13 +2480,6 @@ msgstr "Kullanılabilir bir güncelleme var. Güncellemek için ön ayar paketi msgid "%s has been removed." msgstr "%s kaldırıldı." - -msgid "Select the language" -msgstr "Dili seçin" - -msgid "Language" -msgstr "Dil" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3734,11 +3727,15 @@ msgstr "Geçerli filamenti Filament Track Switch'te geri çek" msgid "Switch track at Filament Track Switch" msgstr "Filament Track Switch'te hattı değiştir" -msgid "The maximum temperature cannot exceed " -msgstr "Maksimum sıcaklık şu değeri aşamaz: " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Maksimum sıcaklık %d değerini aşamaz" -msgid "The minmum temperature should not be less than " -msgstr "Minimum sıcaklık şu değerden az olamaz: " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Minimum sıcaklık %d değerinden az olamaz" # AI Translated msgid "Type to filter..." @@ -4641,6 +4638,15 @@ msgstr "" "Geçici G-code'un çıkış G-code'a kopyalanması başarısız oldu. Belki SD kart yazma kilitlidir.\n" "Hata mesajı: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Geçici G-code'un çıktı G-code'a kopyalanması başarısız oldu.\n" +"Hata mesajı: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Geçici G-code'un çıkış G-code'a kopyalanması başarısız oldu. Hedef cihazda sorun olabilir, lütfen tekrar dışa aktarmayı veya farklı bir cihaz kullanmayı deneyin. Bozuk çıktı G-code %1%.tmp konumunda." @@ -5381,10 +5387,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Değer %s aralık dışında. Geçerli aralık %d ile %d arasındadır." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"%s%% mi yoksa %s %s mi?" +msgid "Is it %s%% or %s %s?" +msgstr "%s%% mi yoksa %s %s mi?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5410,22 +5417,18 @@ msgstr "Geçersiz format. Beklenen vektör formatı: \"%1%\"" msgid "System agents" msgstr "Sistem aracıları" -# AI Translated -msgid "No plugin selected" -msgstr "Eklenti seçilmedi" - # AI Translated msgid "Add plugin" msgstr "Eklenti ekle" -# AI Translated -msgid "Select plugin" -msgstr "Eklenti seç" - # AI Translated msgid "Remove plugin" msgstr "Eklentiyi kaldır" +# AI Translated +msgid "No plugin selected" +msgstr "Eklenti seçilmedi" + # AI Translated msgid "Configure" msgstr "Yapılandır" @@ -5683,14 +5686,20 @@ msgstr "Optimum'a Ayarla" msgid "Regroup filament" msgstr "Filamenti yeniden gruplandır" -msgid "up to" -msgstr "kadar" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "%1% mm'ye kadar" -msgid "above" -msgstr "üstünde" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "%1% mm üzerinde" -msgid "from" -msgstr "itibaren" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "%1% mm ile %2% mm arasında" msgid "Usage" msgstr "Kullan" @@ -6053,7 +6062,7 @@ msgstr "Hacim:" msgid "Size:" msgstr "Boyut:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "%d katmanında G-code yollarında çakışmalar bulundu, Z = %.2lfmm. Lütfen çakışan nesneleri daha uzağa ayırın (%s <-> %s)." @@ -6366,11 +6375,13 @@ msgstr "Projeyi farklı kaydet" msgid "Save current project as" msgstr "Mevcut projeyi farklı kaydet" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "3MF Yayınla" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Seçilen ayarların gömülü olduğu bir 3MF dosyası dışa aktar" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "3MF/STL/STEP/SVG/OBJ/AMF'yi içe aktar" @@ -7647,6 +7658,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Alt" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Bu ayar bir eklenti yeteneği türü belirtmiyor." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Bu ayar tanınmayan bir eklenti yeteneği türü belirtiyor: " + # AI Translated msgid "Plugin Selection" msgstr "Eklenti Seçimi" @@ -8215,11 +8234,13 @@ msgstr "Lütfen bu ön ayarlar içindeki G-code'larının makineye herhangi bir msgid "Customized Preset" msgstr "Özel Ayar" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Bazı yayınlanan ayarlar uygulanamadı:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Bazı filament yuvaları değiştirildi:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Step dosyasındaki bileşenlerin adı UTF-8 formatında değil!" @@ -8630,13 +8651,17 @@ msgstr "Dilimlenmiş dosyayı şu şekilde kaydedin:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "%s dosyası yazıcının depolama alanına gönderildi ve yazıcıda görüntülenebiliyor." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "3MF dosyasını şu adla yayınla:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Yayınlanan 3MF dosyası dışa aktarılamadı.\n" +"Lütfen klasörün çevrimiçi olarak var olup olmadığını veya dosyanın başka programlarda açık olup olmadığını kontrol edin." msgid "Publish" msgstr "Yayınla" @@ -8854,7 +8879,6 @@ msgstr "Devam etmek istiyor musun?" msgid "Language selection" msgstr "Dil seçimi" - msgid "Asia-Pacific" msgstr "Asya Pasifik" @@ -8959,6 +8983,9 @@ msgstr "Mevcut Örnek Yolu: " msgid "General" msgstr "Genel" +msgid "Language" +msgstr "Dil" + msgid "Metric" msgstr "Metrik" @@ -9423,9 +9450,6 @@ msgstr "Dilimlenmiş önizlemede katman kaydırıcısı gezdirilirken, geçerli msgid "Dimmed layer brightness" msgstr "Karartılmış katman parlaklığı" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9841,63 +9865,80 @@ msgstr "Veriler yükleniyor" msgid "Jump to webpage" msgstr "Web sayfasına atla" +# AI Translated msgid "Material" -msgstr "" +msgstr "Malzeme" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Karışık filament" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Bazı karışık filamentler, yayınlanmayacak filamentlere bağlıdır:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (karışık)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% için %2% gerekiyor, ancak o etkin değil." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% için %2% gerekiyor, ancak malzemesi yayınlanmayacak." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Bir karışık filamenti yayınlamak için kullandığı her filamenti etkinleştirin ve Tam Yayınlama'yı seçin ya da Tür gereksinimini karşılayın." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Yine de yayınla" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "3MF Yayınla..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "3MF dosyasında hangi ayarların yayınlanacağını seçin" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "3MF Yayınlama Wiki" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "3MF Yayınlama Video Kılavuzu" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Karışık filament - yukarıdaki \"Aktif et\" seçildiğinde bir bütün olarak yayınlanır" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Bu karışık filamenti yayınla ve bileşen filamentlerini etkinleştir + tam olarak yayınla" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Bu filament yuvasını 3MF dosyasında yayınla" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Tam Yayınlama" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Bu yuvadaki filamentin tamamını 3MF dosyasına göm" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Seçilmeyenleri filtrele" #, c-format, boost-format msgid "Save %s as" @@ -9916,6 +9957,10 @@ msgstr "Üst ön ayardan devralınan tüm değerleri bu ön ayara kopyalar ve ü msgid "Detach from parent" msgstr "Ebeveynden ayrıl" +# AI Translated +msgid "Save without parent" +msgstr "Ebeveyn olmadan kaydet" + # AI Translated msgid "Unique preset" msgstr "Bağımsız ön ayar" @@ -10630,9 +10675,17 @@ msgstr "Topaklanma tespiti için bir ana kule gereklidir. Prime tower olmayan mo msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Hem hassas Z yüksekliğini hem de hazırlık kulesini etkinleştirmek dilimleme hatalarına neden olabilir. Yine de hassas Z yüksekliğini etkinleştirmek istiyor musunuz?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Pürüzsüz timelapse her katmanda bir prime kulesi gerektirir; bu da \"Seyrek katman yok\" ile bağdaşmaz. \"Seyrek katman yok\" kapatıldı." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Sorunsuz hızlandırılmış çekim için Prime Tower gereklidir. Prime tower olmayan modelde kusurlar olabilir. Prime tower'ı etkinleştirmek istiyor musunuz?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Seyrek katman yok\", her katmanda bir prime kulesi gerektiren pürüzsüz timelapse ile bağdaşmaz. Timelapse geleneksel moda geçirildi." + msgid "Still print by object?" msgstr "Hala nesneye göre yazdırıyor musunuz?" @@ -11011,9 +11064,6 @@ msgstr "Uyumlu süreç profilleri" msgid "Printable space" msgstr "Plaka Ayarı" -msgid "Printer Agent" -msgstr "Yazıcı Aracısı" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Yazıcı iletişimi için ağ aracısı uygulamasını seçin. Kullanılabilir aracılar başlangıçta kaydedilir." @@ -11434,14 +11484,6 @@ msgstr "Ekstruder sayısı" msgid "Capabilities" msgstr "Yetenekler" -# AI Translated -msgid "Left: " -msgstr "Sol: " - -# AI Translated -msgid "Right: " -msgstr "Sağ: " - msgid "Show all presets (including incompatible)" msgstr "Tüm ön ayarları göster (uyumsuz olanlar dahil)" @@ -12291,15 +12333,22 @@ msgstr "Onarım iptal edildi" msgid "Copying of file %1% to %2% failed: %3%" msgstr "%1% dosyasının %2% dosyasına kopyalanması başarısız oldu: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Yeni satıcı profilleri indiriliyor: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Yapılandırma paketi: %1% sürüm %2% olarak güncellendi" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Satıcı profilleri indirilemedi: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Yapılandırma güncellemelerinden önce kaydedilmemiş değişiklikleri kontrol etmeniz gerekir." -msgid "Configuration package: " -msgstr "Yapılandırma paketi: " - -msgid " updated to " -msgstr " güncellendi " - msgid "Open G-code file:" msgstr "G-code dosyasını açın:" @@ -12364,11 +12413,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping yalnızca Klipper, RepRapFirmware ve Marlin 2 tarafından desteklenir." -msgid "Grouping error: " -msgstr "Gruplama hatası: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Gruplama hatası: %1% sol nozula yerleştirilemez" -msgid " can not be placed in the " -msgstr " içine yerleştirilemez " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Gruplama hatası: %1% sağ nozula yerleştirilemez" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12483,6 +12536,10 @@ msgstr "%1% diğerlerine çok yakın ve çarpışmalara neden olabilir." msgid "%1% is too tall, and collisions will be caused." msgstr "%1% çok uzun ve çarpışmalara neden olacak." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Modelin ve prime kulesinin göreli konumu \"Seyrek katman yok\" özelliğinin gereksinimlerini karşılamıyor. Lütfen göreli konumlarını ayarlayın, model yüksekliğini azaltın veya \"Seyrek katman yok\" seçeneğini kapatın." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " Hariç tutma alanına çok yakın olduğundan yazdırma sırasında çarpışmalar meydana gelebilir." @@ -12848,6 +12905,9 @@ msgstr "G-code yerine 3MF kullan" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Yazıcı, baskı işi olarak 3MF dosyası kabul ediyorsa bunu etkinleştirin. Etkinleştirildiğinde Orca Slicer, dilimlenmiş dosyayı düz bir .gcode dosyası yerine .gcode.3mf olarak gönderir." +msgid "Printer Agent" +msgstr "Yazıcı Aracısı" + msgid "Select the network agent implementation for printer communication." msgstr "Yazıcı iletişimi için ağ aracısı uygulamasını seçin." @@ -13918,6 +13978,10 @@ msgstr "Hizalanmış doğrusal" msgid "Concentric" msgstr "Konsantrik" +# AI Translated +msgid "Spiral Inset" +msgstr "Spiral içe" + msgid "Hilbert Curve" msgstr "Hilbert eğrisi" @@ -14009,12 +14073,12 @@ msgstr "Üst yüzey doldurma sırası" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken üst yüzeylerin doldurulma yönü.\n" -"Dışarı, yüzeyin merkezinden başlar; böylece fazla malzeme en az göründüğü kenara doğru itilir. İçeri kenardan başlar ve merkezdeki dar kavislerle biter.\n" +"Merkezden başlayan bir desen kullanıldığında üst yüzeylerin doldurulma yönü (Konsantrik, Spiral içe, Arşimet akorları, Sekizgen spiral).\n" +"Dışarı, yüzeyin merkezinden başlar; böylece fazla malzeme, en az göründüğü kenara doğru itilir. İçeri, kenardan başlar ve merkezdeki dar kavislerle biter.\n" "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır." # AI Translated @@ -14023,12 +14087,12 @@ msgstr "Alt yüzey doldurma sırası" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken alt yüzeylerin doldurulma yönü.\n" -"İçeri, her yüzeye daha geniş dış kavislerle başlar; bu da merkezdeki dar kavislerin yapışmayabileceği yapı plakalarında ilk katman yapışmasını iyileştirir. Dışarı merkezden başlar ve fazla malzemeyi kenara doğru iter.\n" +"Merkezden başlayan bir desen kullanıldığında alt yüzeylerin doldurulma yönü (Konsantrik, Spiral içe, Arşimet akorları, Sekizgen spiral).\n" +"İçeri, her yüzeye daha geniş dış kavislerle başlar; bu da merkezdeki dar kavislerin tutunamayabileceği yataklarda ilk katman yapışmasını iyileştirir. Dışarı, merkezden başlar ve fazla malzemeyi kenara doğru iter.\n" "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır." msgid "Internal solid infill pattern" @@ -14134,6 +14198,14 @@ msgstr "Saat yönünün tersine" msgid "Clockwise" msgstr "Saat yönünde" +# AI Translated +msgid "Distance to rod" +msgstr "Mile mesafe" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Nozul ucunun milin uzak kenarına olan yatay mesafesi. Nesneye göre baskıda çarpışmalardan kaçınmak için kullanılır." + msgid "Height to rod" msgstr "Çubuğa kadar olan yükseklik" @@ -16353,6 +16425,20 @@ msgstr "Çıkıntılı duvarı algıla" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Çizgi genişliğine göre çıkıntı yüzdesini tespit edin ve yazdırmak için farklı hızlar kullanın. %%100 çıkıntı için köprü hızı kullanılır." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Desteklenmeyen duvarları en son yazdır" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Tamamen havada kalan duvar döngüleri, ancak onları tutabilecek bir şey oluştuğunda yazdırılır:\n" +"duvar sırası ne olursa olsun, kendi adasındaki diğer duvarlardan sonra, en içtekinden başlayarak ekstrüde edilirler.\n" +"Yalnızca bu katmanın köprülerinin sabitleyebileceği bir döngü, o köprüler yazdırılana kadar bekler; desteklenen bir duvar boyunca uzanan bir döngü ise, kendisine sabitleme olarak ihtiyaç duyan dolgudan önceki yerini korur." + # AI Translated msgid "Outer walls" msgstr "Dış duvarlar" @@ -16801,6 +16887,39 @@ msgstr "Döngülerde temizleme" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Kapalı döngü ekstrüzyonda dikişin görünürlüğünü en aza indirmek için, ekstruder döngüden ayrılmadan önce içeriye doğru küçük bir hareket gerçekleştirilir." +# AI Translated +msgid "Wipe inward" +msgstr "İçeri temizleme" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Yalnızca delik sınırları dahil olmak üzere dış duvarlara uygulanır. Temizleme sırasında sıcak nozulu yazdırılmış iç duvarlara doğru hareket ettirerek yeni yazdırılmış plastiğin yeniden ısınmasını ve dikiş izlerini azaltır.\n" +"\n" +"Özellikle temizleme izlerinin daha belirgin olduğu 0,1 mm'nin altındaki katman yüksekliklerinde yararlıdır.\n" +"\n" +"Yazdırılmış bitişik bir iç duvar yoksa (tek duvarlı alanlar veya Dış/İç duvar sırası) ya da örneğin dar köşelerde veya dikiş boşluklarında desteklenen bir içeri yol bulunamazsa normal temizlemeyi kullanır." + +# AI Translated +msgid "Wipe inward distance" +msgstr "İçeri temizleme mesafesi" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Temizleme yolunun dış çevreden uzağa kaydırıldığı mesafe; milimetre cinsinden veya dış duvarın gerçek ekstrüzyon genişliğinin yüzdesi olarak belirtilir.\n" +"\n" +"Örneğin 50%, yolu dış duvar genişliğinin yarısı kadar kaydırır. Etkin kaydırma, hem dış duvarın gerçek genişliğiyle hem de bitişik duvara olan mevcut boşlukla sınırlıdır; bu nedenle 100% üzerindeki değerlerin veya buna denk bir mutlak mesafenin ek bir etkisi olmaz. Kaydırmayı devre dışı bırakmak için 0 girin." + msgid "Wipe before external loop" msgstr "Harici döngüden önce silin" @@ -17067,8 +17186,9 @@ msgstr "Yeni takımı baskı sıcaklığına ulaşmasını beklemeden alır, sil msgid "No sparse layers (beta)" msgstr "Seyrek katman yok (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda yazdırılmayacaktır. Araç değişimi olan katmanlarda, ekstruder silme kulesini yazdırmak için aşağı doğru hareket edecektir. Baskı ile çarpışma olmamasını sağlamak kullanıcının sorumluluğundadır." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda yazdırılmaz. Araç değişimi olan katmanlarda ekstruder silme kulesini yazdırmak için aşağı doğru hareket eder; böylece kule modelin altında kalır ve baskı kafasının ona uzanması gerekir. Bunun daha önce yazdırılmış bir nesneyle çarpışmasına yol açacak yerleşimler reddedilir. Her katmanda bir kule gerektiren pürüzsüz timelapse veya nozul birikme algılamayla birlikte etkisi yoktur." msgid "Prime all printing extruders" msgstr "Tüm ekstruderleri temizle" @@ -17094,6 +17214,34 @@ msgstr "" msgid "Cyclic" msgstr "Döngüsel" +# AI Translated +msgid "Cyclic order" +msgstr "Döngüsel sıra" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Döngüsel araç değiştirme sıralamasının kullandığı özel filament dizisi; virgülle ayrılmış filament numaraları olarak (örn. \"3,2,1,4\").\n" +"Her katman filamentlerini bu diziye göre yazdırır; listelenmeyen filamentler en son, artan sırada yazdırılır.\n" +"Filamentleri artan sırada dolaşmak için boş bırakın." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Döngüsel sırayı ilk katmana uygula" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Döngüsel araç değiştirme sırasını ilk katmana da uygular.\n" +"Varsayılan olarak kapalıdır, çünkü ilk katman bunun yerine en iyi tabla yapışması için sıralanır: ilk katmanın küçük, kırılgan ayrıntılarını yazdıran filamentler en son yazdırılır; böylece sonraki araç değişimleri ve seyahat hareketlerinin bu zayıf tutunan parçaları koparma olasılığı azalır. Bu ilk katman sırası, ayarlanmışsa özel bir ilk katman filament dizisini de dikkate alır. Döngüsel sıranın faydası (fazladan araç değişimleri her katmana soğuması için daha fazla süre tanır) yapışma için yavaş ve sıcak yazdırılan ilk katman için geçerli değildir.\n" +"Bunu yalnızca her katmanda, ilki dahil, tam olarak aynı araç dizisine ihtiyaç duyuyorsanız, söz konusu yapışma optimizasyonundan vazgeçerek etkinleştirin." + msgid "Slice gap closing radius" msgstr "Dilim aralığı kapanma yarıçapı" @@ -17103,9 +17251,6 @@ msgstr "Üçgen mesh dilimleme sırasında 2x boşluk kapatma yarıçapından k msgid "Slicing Mode" msgstr "Dilimleme modu" -msgid "Other" -msgstr "Diğer" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "3DLabPrint uçak modelleri için \"Çift-tek\" seçeneğini kullanın. Modeldeki tüm delikleri kapatmak için \"Delikleri kapat\"ı kullanın." @@ -18121,6 +18266,14 @@ msgstr "Kontrol yok" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "G-code yol çakışmaları kontrolü gibi herhangi bir geçerlilik kontrolü çalıştırmayın." +# AI Translated +msgid "Strict mode" +msgstr "Katı mod" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Dilimleme, aksi halde yalnızca günlüğe yazılacak kritik olmayan bir uyarı verdiğinde sıfırdan farklı bir kodla çıkar; örneğin destek kapalıyken desteğe ihtiyaç duyan bir model. Bunu, fark edilmesi güç biçimde bozuk bir dilimlemeyi asla teslim etmemesi gereken CI veya betikli iş akışlarında kullanın. Bu tür her uyarı ayrıca, yalnızca Linux'ta yazılan result.json dosyasının `warnings` dizisinde kararlı bir sınıfla listelenir. Destek kontrolünü atlayan --no-check ile birlikte kullanılamaz." + msgid "Normative check" msgstr "Normatif kontrol" @@ -18133,11 +18286,28 @@ msgstr "Çıktı Model Bilgileri" msgid "This outputs the model’s information." msgstr "Modelin bilgilerini çıktıla." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Ağı incele (stdout'a JSON)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Yüklenen her nesnenin JSON özetini stdout'a yazar ve ardından çıkar: sınırlayıcı kutuları ve üzerine yatırılabileceği dışbükey kabuk yüzleri ile bunların normalleri, alanları ve merkezleri. --ground-* seçeneklerinin arasından seçim yaptığı yüzler bunlardır. --info seçeneğinin makine tarafından okunabilir alternatifi." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Boyamayı incele (stdout'a JSON)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Yüklenen modelde halihazırda saklanan her boyalı katmanın (destekler, dikiş, MMU rengi, pütürlü yüzey) yapılandırılmış bir JSON özetini — duruma göre yüzey sayısı, yüzey alanı ve ağa göre sınırlayıcı kutu — yazar ve ardından çıkar. Arayüzde boyama araçlarını açmanın makine tarafından okunabilir alternatifi." + msgid "Export Settings" msgstr "Dışa Aktarma Ayarları" -msgid "This exports settings to a file." -msgstr "Ayarları bir dosyaya aktarın." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Bu, ayarları bir dosyaya aktarır. stdout'a yazmak için - kullanın." msgid "Send progress to pipe" msgstr "İlerlemeyi kanala gönder" @@ -18193,6 +18363,30 @@ msgstr "Y etrafında döndür" msgid "Rotation angle around the Y axis in degrees." msgstr "Y ekseni etrafında derece cinsinden dönüş açısı." +# AI Translated +msgid "Ground largest face" +msgstr "En büyük yüze yatır" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Her nesneyi dışbükey kabuğunun en büyük yüzüne yatırır ve yatağa bırakır. Eşit büyüklükteki yüzler arasından zaten aşağı bakan yüz korunur. Üzerine oturacak kadar büyük bir yüzü olmayan nesneler olduğu gibi bırakılır. Dönüşümler komut satırı sırasına göre çalışır; bu nedenle bu seçenekten önce verilen döndürmeler dikkate alınır. --orient 1 tüm dönüşümlerden sonra çalışır ve yönlendirmeyi değiştirir." + +# AI Translated +msgid "Ground face by normal" +msgstr "Normale göre yüze yatır" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Her nesneyi, dışa bakan normali NX,NY,NZ yönüne en yakın olan dışbükey kabuk yüzüne yatırır ve yatağa bırakır. Yön, bu seçenekten önce verilen döndürmeleri içeren ve giriş dosyası nesneyi döndürmediği sürece tabla eksenleriyle örtüşen nesne koordinatlarındadır. Örneğin 1,0,0 nesneyi +X tarafına dikey olarak oturtur. --orient 1 tüm dönüşümlerden sonra çalışır ve yönlendirmeyi değiştirir." + +# AI Translated +msgid "Ground face at point" +msgstr "Noktadaki yüze yatır" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Her nesneyi, X,Y,Z noktasını içeren dışbükey kabuk yüzüne yatırır ve yatağa bırakır. Nokta, bu seçenekten önce verilen döndürmeleri içeren nesne koordinatlarındadır; --inspect-mesh yüz merkezlerini bu koordinatlarda bildirir. Böyle bir yüzü olmayan nesneler olduğu gibi bırakılır ve hiçbir nesnede böyle bir yüz yoksa çalışma başarısız olur. --orient 1 tüm dönüşümlerden sonra çalışır ve yönlendirmeyi değiştirir." + msgid "Scale the model by a float factor." msgstr "Modeli kayan nokta faktörüne göre ölçeklendirin." @@ -21388,14 +21582,17 @@ msgstr "Bu eylem geri alınamaz. Devam etmek?" msgid "Skipping objects." msgstr "Nesneleri atlama." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Malzeme Oranı" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Model Yüksekliği" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Oran" msgid "Select Filament" msgstr "Filament Seçin" @@ -21679,12 +21876,14 @@ msgid "Drying-Dehumidifying" msgstr "Kurutma-Nem Alma" # AI Translated -msgid " maximum drying temperature is " -msgstr " için maksimum kurutma sıcaklığı " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s için maksimum kurutma sıcaklığı %d°C'dir." # AI Translated -msgid " minimum drying temperature is " -msgstr " için minimum kurutma sıcaklığı " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s için minimum kurutma sıcaklığı %d°C'dir." # AI Translated msgid "This filament may not be completely dried." @@ -22131,6 +22330,97 @@ msgstr "" "Eğilmeyi önleyin\n" "ABS gibi bükülmeye yatkın malzemelere baskı yaparken, ısıtma yatağı sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını azaltabileceğini biliyor muydunuz?" +#~ msgid "Other" +#~ msgstr "Diğer" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Sol: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Sağ: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Maksimum sıcaklık şu değeri aşamaz: " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Minimum sıcaklık şu değerden az olamaz: " + +#~ msgid "up to" +#~ msgstr "kadar" + +#~ msgid "above" +#~ msgstr "üstünde" + +#~ msgid "from" +#~ msgstr "itibaren" + +#~ msgid "Configuration package: " +#~ msgstr "Yapılandırma paketi: " + +#~ msgid " updated to " +#~ msgstr " güncellendi " + +#~ msgid "Grouping error: " +#~ msgstr "Gruplama hatası: " + +#~ msgid " can not be placed in the " +#~ msgstr " içine yerleştirilemez " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " için maksimum kurutma sıcaklığı " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " için minimum kurutma sıcaklığı " + +# AI Translated +#~ msgid "needs" +#~ msgstr "şunu gerektirir" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "etkin değil" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "malzeme yayınlanmadı" + +#~ msgid "Select the language" +#~ msgstr "Dili seçin" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Eklenti seç" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken üst yüzeylerin doldurulma yönü.\n" +#~ "Dışarı, yüzeyin merkezinden başlar; böylece fazla malzeme en az göründüğü kenara doğru itilir. İçeri kenardan başlar ve merkezdeki dar kavislerle biter.\n" +#~ "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Merkez tabanlı bir desen (Konsantrik, Arşimet akorları, Sekizgen spiral) kullanılırken alt yüzeylerin doldurulma yönü.\n" +#~ "İçeri, her yüzeye daha geniş dış kavislerle başlar; bu da merkezdeki dar kavislerin yapışmayabileceği yapı plakalarında ilk katman yapışmasını iyileştirir. Dışarı merkezden başlar ve fazla malzemeyi kenara doğru iter.\n" +#~ "Varsayılan, her iki yönde de ilerleyebilen en kısa yol sıralamasını kullanır." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Etkinleştirilirse, silme kulesi araç değişimi olmayan katmanlarda yazdırılmayacaktır. Araç değişimi olan katmanlarda, ekstruder silme kulesini yazdırmak için aşağı doğru hareket edecektir. Baskı ile çarpışma olmamasını sağlamak kullanıcının sorumluluğundadır." + +#~ msgid "This exports settings to a file." +#~ msgstr "Ayarları bir dosyaya aktarın." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Yerel Wayland canlı görüntüsü, GStreamer GTK video alıcısını gerektirir. Lütfen GStreamer için gtksink eklentisini yükleyin ve ardından OrcaSlicer'ı yeniden başlatın." diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index c3ac201896..9232201869 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: orcaslicerua\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-07-17 16:25+0300\n" "Last-Translator: Andrij Mizyk \n" "Language-Team: Ukrainian\n" @@ -2424,13 +2424,6 @@ msgstr "Доступне оновлення. Відкрийте вікно на msgid "%s has been removed." msgstr "%s вилучено." - -msgid "Select the language" -msgstr "Вибрати мову" - -msgid "Language" -msgstr "Мова" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "Не вдалося перемкнути Orca Slicer на мову %s." @@ -3666,11 +3659,15 @@ msgstr "Відвести назад поточний філамент на Filam msgid "Switch track at Filament Track Switch" msgstr "Перемкнути доріжку на Filament Track Switch" -msgid "The maximum temperature cannot exceed " -msgstr "Максимальна температура не повинна перевищувати " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Максимальна температура не повинна перевищувати %d" -msgid "The minmum temperature should not be less than " -msgstr "Мінімальна температура не повинна бути нижчою ніж " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Мінімальна температура не повинна бути нижчою ніж %d" msgid "Type to filter..." msgstr "Вводьте для фільтру..." @@ -4577,6 +4574,15 @@ msgstr "" "Не вдалося скопіювати тимчасовий G-код у місцезнаходження вихідного файлу G-коду. Чи може ваша SD карта захищена від запису?\n" "Повідомлення про помилку: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Не вдалося скопіювати тимчасовий G-код у вихідний G-код.\n" +"Повідомлення про помилку: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Не вдалося скопіювати тимчасовий G-код у вихідний G-код. Можливо, проблема з цільовим пристроєм, спробуйте експортувати ще раз або використати інший пристрій. Пошкоджений вихідний G-код - %1% .tmp." @@ -5329,10 +5335,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Значення %s знаходиться за межами діапазону. Дійсний діапазон від %d до %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Це %s%% або %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Це %s%% або %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5359,22 +5366,18 @@ msgstr "Невірний формат. Очікуваний векторний msgid "System agents" msgstr "Системні агенти" -# AI Translated -msgid "No plugin selected" -msgstr "Плагін не вибрано" - # AI Translated msgid "Add plugin" msgstr "Додати плагін" -# AI Translated -msgid "Select plugin" -msgstr "Вибрати плагін" - # AI Translated msgid "Remove plugin" msgstr "Вилучити плагін" +# AI Translated +msgid "No plugin selected" +msgstr "Плагін не вибрано" + # AI Translated msgid "Configure" msgstr "Налаштувати" @@ -5640,14 +5643,20 @@ msgstr "Встановити до оптимального" msgid "Regroup filament" msgstr "Перегрупувати філамент" -msgid "up to" -msgstr "аж до" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "до %1% мм" -msgid "above" -msgstr "вище" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "вище %1% мм" -msgid "from" -msgstr "від" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "від %1% до %2% мм" msgid "Usage" msgstr "Використання" @@ -6012,7 +6021,7 @@ msgid "Size:" msgstr "Розмір:" # AI Translated -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Виявлено конфлікти шляхів G-коду на шарі %d, Z = %.2lf мм. Будь ласка, рознесіть конфліктуючі обʼєкти далі один від одного (%s <-> %s)." @@ -6335,11 +6344,13 @@ msgstr "Зберегти проєкт як" msgid "Save current project as" msgstr "Зберегти поточний проєкт як" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Публікувати 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Експортувати файл 3MF із вбудованими вибраними налаштуваннями" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Імпорт 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7631,6 +7642,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Низ" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Це налаштування не вказує тип можливості плагіна." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Це налаштування вказує нерозпізнаний тип можливості плагіна: " + # AI Translated msgid "Plugin Selection" msgstr "Вибір плагіна" @@ -8223,11 +8242,13 @@ msgstr "Будь ласка, підтвердьте, що G-коди в цих msgid "Customized Preset" msgstr "Пристосований пресет" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Деякі опубліковані налаштування не вдалося застосувати:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Деякі слоти філаменту було змінено:" # AI Translated msgid "Component name(s) inside step file not in UTF-8 format!" @@ -8641,13 +8662,17 @@ msgstr "Зберегти нарізаний файл як:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "Файл %s надіслано до памʼяті принтера та доступний для перегляду на принтері." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Публікувати файл 3MF як:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Не вдалося експортувати опублікований файл 3MF.\n" +"Перевірте, чи доступна тека онлайн і чи не відкрито файл в інших програмах." msgid "Publish" msgstr "Публікувати" @@ -8868,7 +8893,6 @@ msgstr "Ви хочете продовжувати?" msgid "Language selection" msgstr "Вибір мови" - msgid "Asia-Pacific" msgstr "Азіатсько-Тихоокеанський регіон" @@ -8976,6 +9000,9 @@ msgstr "Шлях Поточної Інсталяції: " msgid "General" msgstr "Загальні" +msgid "Language" +msgstr "Мова" + msgid "Metric" msgstr "Метрика" @@ -9436,9 +9463,6 @@ msgstr "Під час прокручування повзунка шарів у msgid "Dimmed layer brightness" msgstr "Яскравість затемнених шарів" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9844,63 +9868,80 @@ msgstr "Відвантаження даних" msgid "Jump to webpage" msgstr "Перейти на вебсторінку" +# AI Translated msgid "Material" -msgstr "" +msgstr "Матеріал" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Змішаний філамент" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Деякі змішані філаменти залежать від філаментів, які не будуть опубліковані:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Філамент %d (змішаний)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% потребує %2%, але його не ввімкнено." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% потребує %2%, але його матеріал не буде опубліковано." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Щоб опублікувати змішаний філамент, увімкніть кожен філамент, який він використовує, і виберіть «Повна публікація» або виконайте його вимогу «Тип»." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Опублікувати попри це" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Публікувати 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Виберіть, які налаштування буде опубліковано у файлі 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Енциклопедія з публікації 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Відеопосібник з публікації 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Змішаний філамент — публікується цілком, коли вище вибрано «Увімкнути»" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Опублікувати цей змішаний філамент та увімкнути + повністю опублікувати його складові філаменти" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Опублікувати цей слот філаменту у файлі 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Повна публікація" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Вбудувати весь філамент цього слота у файл 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Фільтрувати невибрані" #, c-format, boost-format msgid "Save %s as" @@ -9920,6 +9961,10 @@ msgstr "Копіює в цей пресет усі значення, успад msgid "Detach from parent" msgstr "Відʼєднати від батьківського" +# AI Translated +msgid "Save without parent" +msgstr "Зберегти без батьківського" + # AI Translated msgid "Unique preset" msgstr "Незалежний пресет" @@ -10659,10 +10704,18 @@ msgstr "Для виявлення налипання потрібна підго msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Одночасне увімкнення точної висоти Z та підготовчої вежі може спричинити помилки нарізки. Ви все одно хочете увімкнути точну висоту Z?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Плавний таймлапс потребує підготовчої вежі на кожному шарі, що несумісно з параметром «Без розріджених шарів». Параметр «Без розріджених шарів» вимкнено." + # AI Translated msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Для плавного таймлапсу потрібна підготовча вежа. Без підготовчої вежі на моделі можуть виникати дефекти. Ви хочете увімкнути підготовчу вежу?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "Параметр «Без розріджених шарів» несумісний із плавним таймлапсом, який потребує підготовчої вежі на кожному шарі. Таймлапс перемкнено в традиційний режим." + msgid "Still print by object?" msgstr "Все одно друкувати кожен обʼєкт окремо?" @@ -11053,9 +11106,6 @@ msgstr "Сумісні профілі процесів" msgid "Printable space" msgstr "Місце для друку" -msgid "Printer Agent" -msgstr "Агент принтера" - # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Виберіть реалізацію мережевого агента для звʼязку з принтером. Доступні агенти реєструються під час запуску." @@ -11479,12 +11529,6 @@ msgstr "Кількість екструдерів" msgid "Capabilities" msgstr "Можливості" -msgid "Left: " -msgstr "Лівий: " - -msgid "Right: " -msgstr "Правий: " - msgid "Show all presets (including incompatible)" msgstr "Показувати всі профілі (включаючи несумісні)" @@ -12349,16 +12393,23 @@ msgstr "Ремонт скасовано" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Копіювання %1% у %2% не вдалося: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Завантаження нових профілів виробників: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Пакет конфігурації: %1% оновлено до %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Не вдалося завантажити профілі виробників: " + # AI Translated msgid "Please check any unsaved changes before updating the configuration." msgstr "Будь ласка, перевірте незбережені зміни перед оновленням конфігурації." -msgid "Configuration package: " -msgstr "Пакет конфігурації: " - -msgid " updated to " -msgstr " оновлено до " - msgid "Open G-code file:" msgstr "Відкрити файл G-коду:" @@ -12423,11 +12474,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input Shaping підтримується лише Klipper, RepRapFirmware і Marlin 2." -msgid "Grouping error: " -msgstr "Помилка групування: " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Помилка групування: %1% не можна розмістити в лівому соплі" -msgid " can not be placed in the " -msgstr " не можливо помістити у " +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Помилка групування: %1% не можна розмістити в правому соплі" msgid "Group error in manual mode. Please check nozzle count or regroup." msgstr "Помилка групування в ручному режимі. Перевірте кількість сопел або перегрупуйте." @@ -12541,6 +12596,10 @@ msgstr "%1% знаходиться надто близько до інших, щ msgid "%1% is too tall, and collisions will be caused." msgstr "%1% занадто високий, і можуть виникнути зіткнення." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Взаємне розташування моделі та підготовчої вежі не відповідає вимогам функції «Без розріджених шарів». Змініть їхнє взаємне розташування, зменште висоту моделі або вимкніть параметр «Без розріджених шарів»." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " знаходиться надто близько до зони відчуження, при друку можуть виникати колізії." @@ -12919,6 +12978,9 @@ msgstr "Використовувати 3MF замість G-коду" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Увімкніть, якщо принтер приймає файл 3MF як завдання друку. Якщо увімкнено, Orca Slicer надсилає нарізаний файл як .gcode.3mf замість звичайного файлу .gcode." +msgid "Printer Agent" +msgstr "Агент принтера" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Виберіть реалізацію мережевого агента для звʼязку з принтером." @@ -14014,6 +14076,10 @@ msgstr "Вирівняний прямолінійний" msgid "Concentric" msgstr "Концентричний" +# AI Translated +msgid "Spiral Inset" +msgstr "Спіральний відступ" + msgid "Hilbert Curve" msgstr "Крива Гільберта" @@ -14104,13 +14170,13 @@ msgstr "Порядок заповнення верхньої поверхні" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Напрямок, у якому заповнюються верхні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n" -"Назовні починає з центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Усередину починає з краю та завершується щільними кривими в центрі.\n" -"Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку." +"Напрямок заповнення верхніх поверхонь під час використання шаблону, що йде від центру (Концентричний, Спіральний відступ, Хорди Архімеда, Спіральна октограма).\n" +"Назовні починає від центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Всередину починає від краю й завершується тісними вигинами в центрі.\n" +"Типово використовується порядок за найкоротшим шляхом, який може йти в будь-якому напрямку." # AI Translated msgid "Bottom surface fill order" @@ -14118,13 +14184,13 @@ msgstr "Порядок заповнення нижньої поверхні" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Напрямок, у якому заповнюються нижні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n" -"Усередину починає кожну поверхню з ширших зовнішніх кривих, що покращує зчеплення першого шару на столах, де щільні криві в центрі можуть не прилипати. Назовні починає з центру, виштовхуючи надлишок матеріалу до краю.\n" -"Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку." +"Напрямок заповнення нижніх поверхонь під час використання шаблону, що йде від центру (Концентричний, Спіральний відступ, Хорди Архімеда, Спіральна октограма).\n" +"Всередину починає кожну поверхню з ширших зовнішніх вигинів, що поліпшує прилипання першого шару до столів, до яких тісні вигини в центрі можуть не приставати. Назовні починає від центру, виштовхуючи надлишок матеріалу до краю.\n" +"Типово використовується порядок за найкоротшим шляхом, який може йти в будь-якому напрямку." msgid "Internal solid infill pattern" msgstr "Шаблон внутрішнього суцільного заповнення" @@ -14229,6 +14295,14 @@ msgstr "Проти годинникової стрілки" msgid "Clockwise" msgstr "За годинниковою стрілкою" +# AI Translated +msgid "Distance to rod" +msgstr "Відстань до штанги" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Горизонтальна відстань від кінчика сопла до дальшого краю штанги. Використовується для уникнення зіткнень під час друку по обʼєктах." + msgid "Height to rod" msgstr "Висота до сопла" @@ -16536,6 +16610,20 @@ msgstr "Виявлення стінок що нависають" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Визначити відсоток нависання відносно до ширини лінії та використовувати для друку іншу швидкість. Для 100%%-вого нависання використовується швидкість моста." +# AI Translated +msgid "Print unsupported walls last" +msgstr "Друкувати неопорні стінки останніми" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Контури стінок, що повністю висять у повітрі, друкуються лише тоді, коли їх є чим утримати:\n" +"вони екструдуються після інших стінок свого острова, починаючи з найвнутрішнішої, незалежно від порядку стінок.\n" +"Контур, який можуть закріпити лише мости цього шару, чекає, доки ці мости буде надруковано, тоді як контур, що йде вздовж опертої стінки, зберігає своє місце перед заповненням, якому він потрібен як якір." + # AI Translated msgid "Outer walls" msgstr "Зовнішні стінки" @@ -16982,6 +17070,39 @@ msgstr "Протирати на контурах" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Щоб звести до мінімуму видимість шва при екструзії із замкнутим контуром,Невеликий рух усередину виконується до виходу екструдера з контуру." +# AI Translated +msgid "Wipe inward" +msgstr "Протирання всередину" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Застосовується лише до зовнішніх стінок, зокрема до контурів отворів. Під час протирання переміщує гаряче сопло до вже надрукованих внутрішніх стінок, щоб зменшити повторне нагрівання щойно надрукованого пластику та сліди шва.\n" +"\n" +"Особливо корисно за висоти шару менше 0,1 мм, де сліди протирання помітніші.\n" +"\n" +"Використовує звичайне протирання, якщо поруч немає вже надрукованої внутрішньої стінки (ділянки з однією стінкою або порядок стінок Зовнішня/Внутрішня) або якщо не вдається знайти опертий шлях усередину, наприклад у тісних кутах чи розривах шва." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Відстань протирання всередину" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Відстань, на яку шлях протирання зміщується від зовнішнього контуру, задається в міліметрах або у відсотках від фактичної ширини екструзії зовнішньої стінки.\n" +"\n" +"Наприклад, 50% зміщує шлях на половину ширини зовнішньої стінки. Фактичне зміщення обмежується як реальною шириною зовнішньої стінки, так і доступним проміжком до сусідньої стінки, тому значення понад 100% або еквівалентна абсолютна відстань не дають додаткового ефекту. Задайте 0, щоб вимкнути зміщення." + msgid "Wipe before external loop" msgstr "Протирати перед зовнішнім контуром" @@ -17258,8 +17379,9 @@ msgstr "Бере новий інструмент, не чекаючи, доки msgid "No sparse layers (beta)" msgstr "Без розріджених шарів (бета)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Якщо увімкнено, вежа витирання не друкується на шарах без змін інструментів. На шарах із зміною інструменту екструдер рухатиметься вниз, щоб надрукувати вежу витирання. Користувач несе відповідальність за те, щоб не було зіткнення з друком." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Якщо увімкнено, вежу протирання не буде надруковано на шарах без змін інструменту. На шарах зі зміною інструменту екструдер опуститься вниз, щоб надрукувати вежу протирання, тож вежа опиняється нижче моделі, і головці доводиться тягнутися до неї вниз. Компонування, за яких це призвело б до зіткнення з уже надрукованим обʼєктом, відхиляються. Не діє за плавного таймлапсу чи виявлення налипань на соплі, яким потрібна вежа на кожному шарі." msgid "Prime all printing extruders" msgstr "Підготовка всіх друкуючих екструдерів" @@ -17284,6 +17406,34 @@ msgstr "" msgid "Cyclic" msgstr "Циклічно" +# AI Translated +msgid "Cyclic order" +msgstr "Циклічний порядок" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Власна послідовність філаментів, яку використовує циклічний порядок змін інструменту, у вигляді номерів філаментів через кому (напр. «3,2,1,4»).\n" +"Кожен шар друкує свої філаменти за цією послідовністю; філаменти, яких немає в переліку, друкуються останніми, за зростанням.\n" +"Залиште порожнім, щоб перебирати філаменти за зростанням." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Застосовувати циклічний порядок до першого шару" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Застосовує циклічний порядок змін інструменту також і до першого шару.\n" +"Типово це вимкнено, оскільки перший шар натомість упорядковується для найкращого прилипання до столу: філаменти, якими друкуються дрібні крихкі елементи першого шару, друкуються останніми, тож наступні зміни інструменту та переміщення рідше зривають ці слабко закріплені частини. Цей порядок першого шару враховує також власну послідовність філаментів для першого шару, якщо її задано. Перевага циклічного порядку (додаткові зміни інструменту дають кожному шару більше часу на охолодження) до першого шару не стосується, бо він друкується повільно й гарячим задля прилипання.\n" +"Вмикайте це, лише якщо вам потрібна точно та сама послідовність інструментів на кожному шарі, зокрема на першому, ціною цієї оптимізації прилипання." + msgid "Slice gap closing radius" msgstr "Радіус закриття пробілів під час нарізування" @@ -17293,9 +17443,6 @@ msgstr "Під час розрізання тріщини на трикутну msgid "Slicing Mode" msgstr "Режим нарізки" -msgid "Other" -msgstr "Інший" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Використовуйте «парний-непарний» для моделей літаків 3DLabPrint. Використовуйте «Закрити отвори», щоб закрити всі отвори в моделі." @@ -18331,6 +18478,14 @@ msgstr "Без перевірки" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Не виконувати жодних перевірок дійсності, наприклад перевірку конфліктів шляхів G-коду." +# AI Translated +msgid "Strict mode" +msgstr "Суворий режим" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Завершує роботу з ненульовим кодом, коли нарізка видає некритичне попередження, яке інакше лише записується в журнал, наприклад модель, що потребує підтримок, коли підтримки вимкнено. Використовуйте це в CI або скриптових конвеєрах, які ніколи не мають видавати непомітно зіпсовану нарізку. Кожне таке попередження також наводиться зі сталим класом у масиві `warnings` файлу result.json, який створюється лише в Linux. Не можна поєднувати з --no-check, який пропускає перевірку підтримок." + msgid "Normative check" msgstr "Нормативна перевірка" @@ -18343,11 +18498,28 @@ msgstr "Вихідна інформація про модель" msgid "This outputs the model’s information." msgstr "Виведіть інформацію про модель." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Перевірити сітку (JSON у stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "Виводить у stdout зведення JSON щодо кожного завантаженого обʼєкта й завершує роботу: його обмежувальні паралелепіпеди та грані опуклої оболонки, на які його можна покласти, з їхніми нормалями, площами й центрами. Саме з цих граней вибирають параметри --ground-*. Машиночитна альтернатива --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Перевірити малювання (JSON у stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "Виводить структуроване зведення JSON щодо кожного намальованого шару (підтримки, шов, колір MMU, шорстка поверхня), уже збереженого в завантаженій моделі, — кількість граней, площу поверхні та обмежувальний паралелепіпед у координатах сітки для кожного стану — і завершує роботу. Машиночитна альтернатива відкриттю інструментів малювання в інтерфейсі." + msgid "Export Settings" msgstr "Експортувати налаштування" -msgid "This exports settings to a file." -msgstr "Експортувати налаштування у файл." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Це експортує налаштування у файл. Використовуйте -, щоб записати їх у stdout." msgid "Send progress to pipe" msgstr "Надіслати прогрес до каналу" @@ -18403,6 +18575,30 @@ msgstr "Обертати навколо осі Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Кут обертання навколо осі Y у градусах." +# AI Translated +msgid "Ground largest face" +msgstr "Покласти на найбільшу грань" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Кладе кожен обʼєкт на найбільшу грань його опуклої оболонки й опускає його на стіл. З однакових за площею граней зберігається та, що вже обернена донизу. Обʼєкти без достатньо великої грані для опори лишаються без змін. Перетворення виконуються в порядку командного рядка, тож повороти, задані до цього параметра, враховуються. --orient 1 виконується після всіх перетворень і замінює орієнтацію." + +# AI Translated +msgid "Ground face by normal" +msgstr "Покласти на грань за нормаллю" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Кладе кожен обʼєкт на ту грань опуклої оболонки, зовнішня нормаль якої найближча до напрямку NX,NY,NZ, і опускає його на стіл. Напрямок задається в координатах обʼєкта, які включають повороти, задані до цього параметра, і збігаються з осями столу, якщо вхідний файл не повертає обʼєкт. Наприклад, 1,0,0 ставить обʼєкт на його бік +X. --orient 1 виконується після всіх перетворень і замінює орієнтацію." + +# AI Translated +msgid "Ground face at point" +msgstr "Покласти на грань у точці" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Кладе кожен обʼєкт на ту грань опуклої оболонки, що містить точку X,Y,Z, і опускає його на стіл. Точка задається в координатах обʼєкта, які включають повороти, задані до цього параметра; --inspect-mesh подає центри граней саме в них. Обʼєкти без такої грані лишаються без змін, а запуск завершується помилкою, якщо такої грані немає в жодного обʼєкта. --orient 1 виконується після всіх перетворень і замінює орієнтацію." + msgid "Scale the model by a float factor." msgstr "Масштабуйте модель за допомогою плаваючого коефіцієнта" @@ -21565,14 +21761,17 @@ msgstr "Дію не можливо завершити. Продовжити?" msgid "Skipping objects." msgstr "Пропускання обʼєктів." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Частка матеріалу" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Висота моделі" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Частка" msgid "Select Filament" msgstr "Вибрати філамент" @@ -21837,12 +22036,14 @@ msgid "Drying-Dehumidifying" msgstr "Сушіння — осушення" # AI Translated -msgid " maximum drying temperature is " -msgstr " максимальна температура сушіння — " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Максимальна температура сушіння для %s — %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " мінімальна температура сушіння — " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Мінімальна температура сушіння для %s — %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -22292,6 +22493,95 @@ msgstr "" "Уникнення деформації\n" "Чи знаєте ви, що при друку матеріалами, схильними до деформації, такими як ABS, відповідне підвищення температури столу може зменшити ймовірність деформації?" +#~ msgid "Other" +#~ msgstr "Інший" + +#~ msgid "Left: " +#~ msgstr "Лівий: " + +#~ msgid "Right: " +#~ msgstr "Правий: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Максимальна температура не повинна перевищувати " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Мінімальна температура не повинна бути нижчою ніж " + +#~ msgid "up to" +#~ msgstr "аж до" + +#~ msgid "above" +#~ msgstr "вище" + +#~ msgid "from" +#~ msgstr "від" + +#~ msgid "Configuration package: " +#~ msgstr "Пакет конфігурації: " + +#~ msgid " updated to " +#~ msgstr " оновлено до " + +#~ msgid "Grouping error: " +#~ msgstr "Помилка групування: " + +#~ msgid " can not be placed in the " +#~ msgstr " не можливо помістити у " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " максимальна температура сушіння — " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " мінімальна температура сушіння — " + +# AI Translated +#~ msgid "needs" +#~ msgstr "потребує" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "не увімкнено" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "матеріал не опубліковано" + +#~ msgid "Select the language" +#~ msgstr "Вибрати мову" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Вибрати плагін" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Напрямок, у якому заповнюються верхні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n" +#~ "Назовні починає з центру поверхні, тож надлишок матеріалу виштовхується до краю, де він найменш помітний. Усередину починає з краю та завершується щільними кривими в центрі.\n" +#~ "Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Напрямок, у якому заповнюються нижні поверхні при використанні шаблону з центром (Концентричний, Хорди Архімеда, Спіральна октограма).\n" +#~ "Усередину починає кожну поверхню з ширших зовнішніх кривих, що покращує зчеплення першого шару на столах, де щільні криві в центрі можуть не прилипати. Назовні починає з центру, виштовхуючи надлишок матеріалу до краю.\n" +#~ "Типово використовується впорядкування за найкоротшим шляхом, яке може йти в будь-якому напрямку." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Якщо увімкнено, вежа витирання не друкується на шарах без змін інструментів. На шарах із зміною інструменту екструдер рухатиметься вниз, щоб надрукувати вежу витирання. Користувач несе відповідальність за те, щоб не було зіткнення з друком." + +#~ msgid "This exports settings to a file." +#~ msgstr "Експортувати налаштування у файл." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Нативний перегляд у Wayland потребує відеоприймача GStreamer GTK. Встановіть плагін gtksink для GStreamer, а потім перезапустіть OrcaSlicer." diff --git a/localization/i18n/vi/OrcaSlicer_vi.po b/localization/i18n/vi/OrcaSlicer_vi.po index 4504b5c95c..65ad344552 100644 --- a/localization/i18n/vi/OrcaSlicer_vi.po +++ b/localization/i18n/vi/OrcaSlicer_vi.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2025-10-02 17:43+0700\n" "Last-Translator: \n" "Language-Team: hainguyen.ts13@gmail.com\n" @@ -2568,13 +2568,6 @@ msgstr "Có bản cập nhật khả dụng. Hãy mở hộp thoại gói cài msgid "%s has been removed." msgstr "%s đã bị xóa." - -msgid "Select the language" -msgstr "Chọn ngôn ngữ" - -msgid "Language" -msgstr "Ngôn ngữ" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3878,12 +3871,14 @@ msgid "Switch track at Filament Track Switch" msgstr "Chuyển đường dẫn tại Filament Track Switch" # AI Translated -msgid "The maximum temperature cannot exceed " -msgstr "Nhiệt độ tối đa không được vượt quá " +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "Nhiệt độ tối đa không được vượt quá %d" # AI Translated -msgid "The minmum temperature should not be less than " -msgstr "Nhiệt độ tối thiểu không được thấp hơn " +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "Nhiệt độ tối thiểu không được thấp hơn %d" # AI Translated msgid "Type to filter..." @@ -4834,6 +4829,15 @@ msgstr "" "Sao chép G-code tạm thời sang G-code đầu ra thất bại. Có thể thẻ SD bị khóa ghi?\n" "Thông báo lỗi: %1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"Sao chép G-code tạm sang G-code đầu ra thất bại.\n" +"Thông báo lỗi: %1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "Sao chép G-code tạm thời sang G-code đầu ra thất bại. Có thể có vấn đề với thiết bị đích, vui lòng thử xuất lại hoặc dùng thiết bị khác. G-code đầu ra bị hỏng ở %1%.tmp." @@ -5634,10 +5638,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "Giá trị %s nằm ngoài phạm vi. Phạm vi hợp lệ từ %d đến %d." #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"Là %s%% hay %s %s?" +msgid "Is it %s%% or %s %s?" +msgstr "Là %s%% hay %s %s?" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5663,22 +5668,18 @@ msgstr "Định dạng không hợp lệ. Mong đợi định dạng vector: \"% msgid "System agents" msgstr "Tác nhân hệ thống" -# AI Translated -msgid "No plugin selected" -msgstr "Chưa chọn plugin" - # AI Translated msgid "Add plugin" msgstr "Thêm plugin" -# AI Translated -msgid "Select plugin" -msgstr "Chọn plugin" - # AI Translated msgid "Remove plugin" msgstr "Xóa plugin" +# AI Translated +msgid "No plugin selected" +msgstr "Chưa chọn plugin" + # AI Translated msgid "Configure" msgstr "Cấu hình" @@ -5960,14 +5961,20 @@ msgstr "Đặt về mức tối ưu" msgid "Regroup filament" msgstr "Nhóm lại filament" -msgid "up to" -msgstr "lên đến" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "lên đến %1% mm" -msgid "above" -msgstr "trên" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "trên %1% mm" -msgid "from" -msgstr "từ" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "từ %1% đến %2% mm" msgid "Usage" msgstr "Sử dụng" @@ -6351,7 +6358,7 @@ msgstr "Thể tích:" msgid "Size:" msgstr "Kích thước:" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "Đã tìm thấy xung đột đường đi G-code tại lớp %d, Z = %.2lfmm. Vui lòng tách các vật thể xung đột ra xa hơn (%s <-> %s)." @@ -6683,11 +6690,13 @@ msgstr "Lưu dự án thành" msgid "Save current project as" msgstr "Lưu dự án hiện tại thành" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "Xuất bản 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "Xuất một tệp 3MF có nhúng các cài đặt đã chọn" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "Nhập 3MF/STL/STEP/SVG/OBJ/AMF" @@ -8016,6 +8025,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "Dưới" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "Cài đặt này không chỉ định loại năng lực plugin." + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "Cài đặt này chỉ định một loại năng lực plugin không nhận dạng được: " + # AI Translated msgid "Plugin Selection" msgstr "Chọn plugin" @@ -8629,11 +8646,13 @@ msgstr "Vui lòng xác nhận G-code trong các preset này an toàn để ngăn msgid "Customized Preset" msgstr "Preset tùy chỉnh" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "Không thể áp dụng một số cài đặt đã xuất bản:" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "Một số khe filament đã bị thay đổi:" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "Tên của các thành phần bên trong file STEP không phải định dạng UTF-8!" @@ -9062,13 +9081,17 @@ msgstr "Lưu file đã slice dưới dạng:" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "File %s đã được gửi đến không gian lưu trữ của máy in và có thể được xem trên máy in." +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "Xuất bản tệp 3MF thành:" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"Xuất tệp 3MF đã xuất bản thất bại.\n" +"Vui lòng kiểm tra xem thư mục có tồn tại trực tuyến không, hoặc có chương trình khác đang mở tệp này không." msgid "Publish" msgstr "Xuất bản" @@ -9303,7 +9326,6 @@ msgstr "Bạn có muốn tiếp tục?" msgid "Language selection" msgstr "Chọn ngôn ngữ" - msgid "Asia-Pacific" msgstr "Châu Á-Thái Bình Dương" @@ -9419,6 +9441,9 @@ msgstr "Đường dẫn phiên bản hiện tại: " msgid "General" msgstr "Chung" +msgid "Language" +msgstr "Ngôn ngữ" + msgid "Metric" msgstr "Hệ mét" @@ -9918,9 +9943,6 @@ msgstr "Khi kéo thanh trượt lớp trong bản xem trước đã slice, kết msgid "Dimmed layer brightness" msgstr "Độ sáng của lớp bị làm mờ" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -10357,63 +10379,80 @@ msgstr "Đang tải dữ liệu lên" msgid "Jump to webpage" msgstr "Chuyển đến trang web" +# AI Translated msgid "Material" -msgstr "" +msgstr "Vật liệu" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "Filament pha trộn" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "Một số filament pha trộn phụ thuộc vào các filament sẽ không được xuất bản:" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "Filament %d (pha trộn)" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% cần %2%, nhưng filament này chưa được bật." -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% cần %2%, nhưng vật liệu của nó sẽ không được xuất bản." +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "Để xuất bản một filament pha trộn, hãy bật mọi filament mà nó sử dụng rồi chọn Xuất bản đầy đủ, hoặc đáp ứng yêu cầu Loại của nó." +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "Vẫn xuất bản" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "Xuất bản 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "Chọn những cài đặt sẽ được xuất bản trong tệp 3MF" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "Wiki về Xuất bản 3MF" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "Hướng dẫn video về Xuất bản 3MF" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "Filament pha trộn - được xuất bản trọn bộ khi chọn \"Bật\" ở trên" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "Xuất bản filament pha trộn này và bật + xuất bản đầy đủ các filament thành phần của nó" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "Xuất bản khe filament này trong tệp 3MF" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "Xuất bản đầy đủ" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "Nhúng toàn bộ filament của khe này vào tệp 3MF" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "Lọc mục chưa chọn" #, c-format, boost-format msgid "Save %s as" @@ -10433,6 +10472,10 @@ msgstr "Sao chép tất cả các giá trị kế thừa từ preset cha vào pr msgid "Detach from parent" msgstr "Tách khỏi vật thể cha" +# AI Translated +msgid "Save without parent" +msgstr "Lưu không kèm vật thể cha" + # AI Translated msgid "Unique preset" msgstr "Preset độc lập" @@ -11195,9 +11238,17 @@ msgstr "Prime tower là bắt buộc để phát hiện vón cục. Nếu không msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "Bật cả chiều cao Z chính xác và tháp mồi có thể gây ra lỗi cắt lớp. Bạn vẫn muốn bật chiều cao Z chính xác?" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "Timelapse mượt cần prime tower ở mọi lớp, điều này không tương thích với \"Không có lớp thưa\". \"Không có lớp thưa\" đã được tắt." + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "Cần có prime tower để timelapse mượt. Có thể có khuyết điểm trên model nếu không có prime tower. Bạn có muốn bật prime tower?" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "\"Không có lớp thưa\" không tương thích với timelapse mượt, vốn cần prime tower ở mọi lớp. Timelapse đã chuyển sang chế độ truyền thống." + msgid "Still print by object?" msgstr "Vẫn in theo đối tượng?" @@ -11571,10 +11622,6 @@ msgstr "Hồ sơ quy trình tương thích" msgid "Printable space" msgstr "Không gian in" -# AI Translated -msgid "Printer Agent" -msgstr "Tác nhân máy in" - # AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "Chọn cách triển khai tác nhân mạng cho việc giao tiếp với máy in. Các tác nhân khả dụng được đăng ký khi khởi động." @@ -11998,14 +12045,6 @@ msgstr "Số lượng đầu đùn" msgid "Capabilities" msgstr "Khả năng" -# AI Translated -msgid "Left: " -msgstr "Trái: " - -# AI Translated -msgid "Right: " -msgstr "Phải: " - msgid "Show all presets (including incompatible)" msgstr "Hiển thị tất cả preset (bao gồm cả không tương thích)" @@ -12921,15 +12960,22 @@ msgstr "Sửa chữa đã hủy" msgid "Copying of file %1% to %2% failed: %3%" msgstr "Sao chép file %1% sang %2% thất bại: %3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "Đang tải xuống hồ sơ nhà cung cấp mới: " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "Gói cấu hình: %1% đã cập nhật lên %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "Tải xuống hồ sơ nhà cung cấp thất bại: " + msgid "Please check any unsaved changes before updating the configuration." msgstr "Cần kiểm tra các thay đổi chưa lưu trước khi cập nhật cấu hình." -msgid "Configuration package: " -msgstr "Gói cấu hình: " - -msgid " updated to " -msgstr " đã cập nhật lên " - msgid "Open G-code file:" msgstr "Mở file G-code:" @@ -12996,12 +13042,14 @@ msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "Input shaping chỉ được Klipper, RepRapFirmware và Marlin 2 hỗ trợ." # AI Translated -msgid "Grouping error: " -msgstr "Lỗi nhóm: " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "Lỗi nhóm: %1% không thể đặt vào đầu phun trái" # AI Translated -msgid " can not be placed in the " -msgstr " không thể được đặt vào " +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "Lỗi nhóm: %1% không thể đặt vào đầu phun phải" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -13116,6 +13164,10 @@ msgstr "%1% quá gần các đối tượng khác, và có thể gây va chạm. msgid "%1% is too tall, and collisions will be caused." msgstr "%1% quá cao, và sẽ gây va chạm." +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "Vị trí tương đối giữa mô hình và prime tower không đáp ứng yêu cầu của tính năng \"Không có lớp thưa\". Vui lòng điều chỉnh vị trí tương đối của chúng, hạ chiều cao mô hình, hoặc tắt \"Không có lớp thưa\"." + msgid " is too close to exclusion area, there may be collisions when printing." msgstr " quá gần vùng loại trừ, có thể có va chạm khi in." @@ -13490,6 +13542,10 @@ msgstr "Dùng 3MF thay cho G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "Bật tùy chọn này nếu máy in nhận file 3MF làm tác vụ in. Khi bật, Orca Slicer sẽ gửi file đã slice dưới dạng .gcode.3mf thay vì file .gcode thuần." +# AI Translated +msgid "Printer Agent" +msgstr "Tác nhân máy in" + # AI Translated msgid "Select the network agent implementation for printer communication." msgstr "Chọn cách triển khai tác nhân mạng cho việc giao tiếp với máy in." @@ -14581,6 +14637,10 @@ msgstr "Thẳng hàng căn chỉnh" msgid "Concentric" msgstr "Đồng tâm" +# AI Translated +msgid "Spiral Inset" +msgstr "Xoắn ốc thụt vào" + msgid "Hilbert Curve" msgstr "Đường cong Hilbert" @@ -14672,13 +14732,13 @@ msgstr "Thứ tự lấp bề mặt trên" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Hướng lấp các bề mặt trên khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n" -"Ra ngoài bắt đầu từ tâm bề mặt, nhờ đó vật liệu dư bị đẩy về phía mép nơi ít nhìn thấy nhất. Vào trong bắt đầu từ mép và kết thúc bằng các đường cong hẹp ở tâm.\n" -"Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ." +"Hướng lấp đầy các bề mặt trên khi dùng mẫu xuất phát từ tâm (Đồng tâm, Xoắn ốc thụt vào, Dây cung Archimedes, Xoắn ốc bát giác).\n" +"Ra ngoài bắt đầu từ tâm bề mặt, nên vật liệu dư bị đẩy về phía mép, nơi ít lộ nhất. Vào trong bắt đầu từ mép và kết thúc bằng những đường cong hẹp ở tâm.\n" +"Mặc định dùng thứ tự theo đường đi ngắn nhất, có thể chạy theo hướng nào cũng được." # AI Translated msgid "Bottom surface fill order" @@ -14686,13 +14746,13 @@ msgstr "Thứ tự lấp bề mặt dưới" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"Hướng lấp các bề mặt dưới khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n" -"Vào trong bắt đầu mỗi bề mặt bằng các đường cong ngoài rộng hơn, giúp cải thiện độ bám lớp đầu tiên trên những bàn in mà các đường cong hẹp ở tâm có thể không dính. Ra ngoài bắt đầu từ tâm, đẩy vật liệu dư về phía mép.\n" -"Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ." +"Hướng lấp đầy các bề mặt dưới khi dùng mẫu xuất phát từ tâm (Đồng tâm, Xoắn ốc thụt vào, Dây cung Archimedes, Xoắn ốc bát giác).\n" +"Vào trong bắt đầu mỗi bề mặt bằng những đường cong ngoài rộng hơn, giúp lớp đầu tiên bám tốt hơn trên các bàn in mà những đường cong hẹp ở tâm có thể không dính. Ra ngoài bắt đầu từ tâm, đẩy vật liệu dư về phía mép.\n" +"Mặc định dùng thứ tự theo đường đi ngắn nhất, có thể chạy theo hướng nào cũng được." msgid "Internal solid infill pattern" msgstr "Mẫu infill đặc bên trong" @@ -14796,6 +14856,14 @@ msgstr "Ngược chiều kim đồng hồ" msgid "Clockwise" msgstr "Cùng chiều kim đồng hồ" +# AI Translated +msgid "Distance to rod" +msgstr "Khoảng cách tới thanh" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "Khoảng cách ngang từ mũi đầu phun tới mép xa hơn của thanh. Dùng để tránh va chạm khi in theo đối tượng." + msgid "Height to rod" msgstr "Chiều cao đến thanh" @@ -17070,6 +17138,20 @@ msgstr "Phát hiện thành nhô" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "Phát hiện phần trăm nhô tương đối với độ rộng đường và sử dụng tốc độ khác nhau để in. Đối với phần nhô 100%%, tốc độ cầu được sử dụng." +# AI Translated +msgid "Print unsupported walls last" +msgstr "In các thành không được đỡ sau cùng" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"Các vòng wall nằm hoàn toàn lơ lửng trên không chỉ được in khi đã có thứ gì đó giữ được chúng:\n" +"chúng được đùn sau các thành khác trong cùng đảo, bắt đầu từ vòng trong cùng, bất kể thứ tự thành là gì.\n" +"Một vòng mà chỉ các cầu của lớp này mới neo được sẽ đợi cho tới khi các cầu đó được in, trong khi một vòng chạy dọc theo một thành có điểm tựa vẫn giữ vị trí của nó trước infill, vốn cần nó làm điểm neo." + # AI Translated msgid "Outer walls" msgstr "Thành ngoài" @@ -17519,6 +17601,39 @@ msgstr "Lau trên vòng" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "Để giảm thiểu khả năng nhìn thấy đường nối trong đùn vòng kín, một chuyển động vào trong nhỏ được thực hiện trước khi extruder rời khỏi vòng." +# AI Translated +msgid "Wipe inward" +msgstr "Lau vào trong" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"Chỉ áp dụng cho các thành ngoài, kể cả biên của lỗ. Trong lúc lau, đầu phun nóng được đưa về phía các thành trong đã in để giảm việc nung lại phần nhựa vừa in và giảm vết đường nối.\n" +"\n" +"Đặc biệt hữu ích ở chiều cao lớp dưới 0,1 mm, nơi vết lau dễ thấy hơn.\n" +"\n" +"Dùng cách lau thông thường nếu chưa có thành trong liền kề nào được in (vùng chỉ có một thành hoặc thứ tự thành Ngoài/Trong), hoặc nếu không tìm được đường đi vào trong có điểm tựa, ví dụ ở các góc hẹp hay khe hở đường nối." + +# AI Translated +msgid "Wipe inward distance" +msgstr "Khoảng cách lau vào trong" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"Khoảng cách mà đường lau được dịch ra xa khỏi chu vi ngoài, tính bằng milimét hoặc theo phần trăm độ rộng đùn thực tế của thành ngoài.\n" +"\n" +"Ví dụ, 50% dịch đường đi một nửa độ rộng thành ngoài. Độ dịch thực tế bị giới hạn bởi cả độ rộng thật của thành ngoài lẫn khoảng trống còn lại tới thành liền kề, nên các giá trị trên 100% hoặc khoảng cách tuyệt đối tương đương sẽ không có thêm tác dụng. Đặt 0 để tắt việc dịch chuyển." + msgid "Wipe before external loop" msgstr "Lau trước vòng ngoài" @@ -17788,8 +17903,9 @@ msgstr "Lấy công cụ mới mà không chờ nó đạt nhiệt độ in, di msgid "No sparse layers (beta)" msgstr "Không có lớp thưa (beta)" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "Nếu được bật, wipe tower sẽ không được in trên các lớp không có thay đổi công cụ. Trên các lớp có thay đổi công cụ, extruder sẽ di chuyển xuống để in wipe tower. Người dùng chịu trách nhiệm đảm bảo không có va chạm với bản in." +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "Nếu bật, wipe tower sẽ không được in ở những lớp không có đổi công cụ. Ở những lớp có đổi công cụ, extruder sẽ đi xuống để in wipe tower, nên tháp nằm thấp hơn mô hình và đầu công cụ phải với xuống tới đó. Những bố trí khiến điều này va chạm với một vật thể đã in sẽ bị từ chối. Không có tác dụng với timelapse mượt hoặc phát hiện đóng cục ở đầu phun, vì chúng cần có tháp ở mọi lớp." msgid "Prime all printing extruders" msgstr "Nạp tất cả extruder in" @@ -17815,6 +17931,34 @@ msgstr "" msgid "Cyclic" msgstr "Tuần hoàn" +# AI Translated +msgid "Cyclic order" +msgstr "Thứ tự vòng lặp" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"Trình tự filament tùy chỉnh mà thứ tự đổi công cụ theo vòng lặp sử dụng, viết dưới dạng các số filament ngăn cách bằng dấu phẩy (ví dụ \"3,2,1,4\").\n" +"Mỗi lớp in các filament của nó theo trình tự này; các filament không được liệt kê sẽ in sau cùng, theo thứ tự tăng dần.\n" +"Để trống để luân phiên các filament theo thứ tự tăng dần." + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "Áp dụng thứ tự vòng lặp cho lớp đầu tiên" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"Áp dụng thứ tự đổi công cụ theo vòng lặp cho cả lớp đầu tiên.\n" +"Mặc định tùy chọn này tắt, vì lớp đầu tiên được sắp xếp theo hướng bám dính đế tốt nhất: những filament in các chi tiết nhỏ, mỏng manh của lớp đầu tiên sẽ được in sau cùng, nhờ đó các lần đổi công cụ và di chuyển tiếp theo ít có khả năng làm bong những phần bám yếu đó. Thứ tự lớp đầu tiên này cũng tôn trọng trình tự filament tùy chỉnh cho lớp đầu tiên nếu có thiết lập. Lợi ích của thứ tự vòng lặp (thêm lần đổi công cụ giúp mỗi lớp có nhiều thời gian nguội hơn) không áp dụng cho lớp đầu tiên, vốn được in chậm và nóng để bám dính.\n" +"Chỉ bật tùy chọn này nếu bạn cần đúng cùng một trình tự công cụ ở mọi lớp, kể cả lớp đầu, đánh đổi bằng việc mất tối ưu bám dính nói trên." + msgid "Slice gap closing radius" msgstr "Bán kính đóng khe slice" @@ -17824,9 +17968,6 @@ msgstr "Vết nứt nhỏ hơn 2x bán kính đóng khe được lấp trong sli msgid "Slicing Mode" msgstr "Chế độ slice" -msgid "Other" -msgstr "Khác" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "Sử dụng \"Chẵn-lẻ\" cho model máy bay 3DLabPrint. Sử dụng \"Đóng lỗ\" để đóng tất cả các lỗ trong model." @@ -18859,6 +19000,14 @@ msgstr "Không kiểm tra" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "Không chạy bất kỳ kiểm tra tính hợp lệ nào, chẳng hạn như kiểm tra xung đột đường dẫn G-code." +# AI Translated +msgid "Strict mode" +msgstr "Chế độ nghiêm ngặt" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "Thoát với mã khác 0 khi việc slice phát sinh một cảnh báo không nghiêm trọng mà bình thường chỉ được ghi log, chẳng hạn mô hình cần support trong khi support đang tắt. Hãy dùng trong CI hoặc các quy trình chạy bằng script vốn không bao giờ được xuất ra kết quả slice hỏng một cách khó nhận ra. Mỗi cảnh báo như vậy cũng được liệt kê kèm một lớp ổn định trong mảng `warnings` của result.json, tệp chỉ được ghi trên Linux. Không thể kết hợp với --no-check, tùy chọn bỏ qua việc kiểm tra support." + msgid "Normative check" msgstr "Kiểm tra quy chuẩn" @@ -18871,11 +19020,28 @@ msgstr "Xuất thông tin model" msgid "This outputs the model’s information." msgstr "Xuất thông tin của model." +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "Kiểm tra lưới (JSON ra stdout)" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "In ra stdout bản tóm tắt JSON của từng vật thể đã nạp rồi thoát: các hộp bao của nó và các mặt bao lồi mà nó có thể nằm lên, kèm pháp tuyến, diện tích và tâm của chúng. Đây chính là những mặt mà các tùy chọn --ground-* lựa chọn. Lựa chọn thay thế đọc được bằng máy cho --info." + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "Kiểm tra phần vẽ (JSON ra stdout)" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "In bản tóm tắt JSON có cấu trúc của mọi lớp đã vẽ (support, đường nối, màu MMU, fuzzy skin) đang được lưu trên mô hình đã nạp — số mặt, diện tích bề mặt và hộp bao theo tọa độ lưới cho từng trạng thái — rồi thoát. Lựa chọn thay thế đọc được bằng máy cho việc mở các gizmo vẽ trong giao diện." + msgid "Export Settings" msgstr "Xuất cài đặt" -msgid "This exports settings to a file." -msgstr "Xuất cài đặt vào file." +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "Lệnh này xuất cài đặt ra một tệp. Dùng - để ghi chúng ra stdout." msgid "Send progress to pipe" msgstr "Gửi tiến trình đến pipe" @@ -18931,6 +19097,30 @@ msgstr "Xoay xung quanh Y" msgid "Rotation angle around the Y axis in degrees." msgstr "Góc xoay xung quanh trục Y tính bằng độ." +# AI Translated +msgid "Ground largest face" +msgstr "Đặt lên mặt lớn nhất" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Đặt mỗi vật thể lên mặt lớn nhất của bao lồi rồi thả xuống bàn in. Trong số các mặt lớn bằng nhau, mặt đang hướng xuống sẽ được giữ lại. Những vật thể không có mặt đủ lớn để nằm lên sẽ được giữ nguyên. Các phép biến đổi chạy theo thứ tự trên dòng lệnh, nên các phép xoay đặt trước tùy chọn này vẫn được tôn trọng. --orient 1 chạy sau tất cả các phép biến đổi và thay thế hướng đặt." + +# AI Translated +msgid "Ground face by normal" +msgstr "Đặt lên mặt theo pháp tuyến" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Đặt mỗi vật thể lên mặt của bao lồi có pháp tuyến hướng ra ngoài gần nhất với hướng NX,NY,NZ rồi thả xuống bàn in. Hướng này tính theo tọa độ vật thể, vốn đã bao gồm các phép xoay đặt trước tùy chọn này và trùng với các trục của bàn in trừ khi tệp đầu vào có xoay vật thể. Ví dụ, 1,0,0 dựng vật thể lên mặt +X của nó. --orient 1 chạy sau tất cả các phép biến đổi và thay thế hướng đặt." + +# AI Translated +msgid "Ground face at point" +msgstr "Đặt lên mặt tại điểm" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "Đặt mỗi vật thể lên mặt của bao lồi có chứa điểm X,Y,Z rồi thả xuống bàn in. Điểm này tính theo tọa độ vật thể, vốn đã bao gồm các phép xoay đặt trước tùy chọn này; --inspect-mesh báo tâm các mặt theo đúng hệ tọa độ đó. Những vật thể không có mặt như vậy sẽ được giữ nguyên, và lần chạy sẽ thất bại nếu không vật thể nào có mặt đó. --orient 1 chạy sau tất cả các phép biến đổi và thay thế hướng đặt." + msgid "Scale the model by a float factor." msgstr "Tỷ lệ model theo hệ số số thực." @@ -22235,14 +22425,17 @@ msgstr "Thao tác này không thể hoàn tác. Tiếp tục?" msgid "Skipping objects." msgstr "Đang bỏ qua các vật thể." +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "Tỉ lệ vật liệu" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "Chiều cao mô hình" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "Tỉ lệ" # AI Translated msgid "Select Filament" @@ -22559,12 +22752,14 @@ msgid "Drying-Dehumidifying" msgstr "Sấy - Hút ẩm" # AI Translated -msgid " maximum drying temperature is " -msgstr " nhiệt độ sấy tối đa là " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "Nhiệt độ sấy tối đa của %s là %d°C." # AI Translated -msgid " minimum drying temperature is " -msgstr " nhiệt độ sấy tối thiểu là " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "Nhiệt độ sấy tối thiểu của %s là %d°C." # AI Translated msgid "This filament may not be completely dried." @@ -23015,6 +23210,101 @@ msgstr "" "Tránh cong vênh\n" "Bạn có biết rằng khi in vật liệu dễ cong vênh như ABS, tăng nhiệt độ bàn nóng một cách thích hợp có thể giảm xác suất cong vênh không?" +#~ msgid "Other" +#~ msgstr "Khác" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "Trái: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "Phải: " + +# AI Translated +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "Nhiệt độ tối đa không được vượt quá " + +# AI Translated +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "Nhiệt độ tối thiểu không được thấp hơn " + +#~ msgid "up to" +#~ msgstr "lên đến" + +#~ msgid "above" +#~ msgstr "trên" + +#~ msgid "from" +#~ msgstr "từ" + +#~ msgid "Configuration package: " +#~ msgstr "Gói cấu hình: " + +#~ msgid " updated to " +#~ msgstr " đã cập nhật lên " + +# AI Translated +#~ msgid "Grouping error: " +#~ msgstr "Lỗi nhóm: " + +# AI Translated +#~ msgid " can not be placed in the " +#~ msgstr " không thể được đặt vào " + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " nhiệt độ sấy tối đa là " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " nhiệt độ sấy tối thiểu là " + +# AI Translated +#~ msgid "needs" +#~ msgstr "cần" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "chưa bật" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "vật liệu chưa xuất bản" + +#~ msgid "Select the language" +#~ msgstr "Chọn ngôn ngữ" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "Chọn plugin" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Hướng lấp các bề mặt trên khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n" +#~ "Ra ngoài bắt đầu từ tâm bề mặt, nhờ đó vật liệu dư bị đẩy về phía mép nơi ít nhìn thấy nhất. Vào trong bắt đầu từ mép và kết thúc bằng các đường cong hẹp ở tâm.\n" +#~ "Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ." + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "Hướng lấp các bề mặt dưới khi dùng mẫu dựa trên tâm (Đồng tâm, Dây cung Archimedes, Xoắn ốc bát giác).\n" +#~ "Vào trong bắt đầu mỗi bề mặt bằng các đường cong ngoài rộng hơn, giúp cải thiện độ bám lớp đầu tiên trên những bàn in mà các đường cong hẹp ở tâm có thể không dính. Ra ngoài bắt đầu từ tâm, đẩy vật liệu dư về phía mép.\n" +#~ "Mặc định dùng thứ tự đường đi ngắn nhất, có thể chạy theo hướng bất kỳ." + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "Nếu được bật, wipe tower sẽ không được in trên các lớp không có thay đổi công cụ. Trên các lớp có thay đổi công cụ, extruder sẽ di chuyển xuống để in wipe tower. Người dùng chịu trách nhiệm đảm bảo không có va chạm với bản in." + +#~ msgid "This exports settings to a file." +#~ msgstr "Xuất cài đặt vào file." + # AI Translated #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "Xem trực tiếp trên Wayland thuần cần GStreamer GTK video sink. Vui lòng cài đặt plugin gtksink cho GStreamer, sau đó khởi động lại OrcaSlicer." diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index ff2e0fd940..84df96d57c 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2026-06-11 12:37-0300\n" "Last-Translator: Handle \n" "Language-Team: \n" @@ -2361,13 +2361,6 @@ msgstr "有更新可用。打开预设包对话框进行更新。" msgid "%s has been removed." msgstr "%s 已被移除。" - -msgid "Select the language" -msgstr "选择语言" - -msgid "Language" -msgstr "语言" - #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." msgstr "切换 Orca Slicer 语言到 %s 失败。" @@ -3572,11 +3565,15 @@ msgstr "退回变轨器的当前耗材" msgid "Switch track at Filament Track Switch" msgstr "变轨器开关切换" -msgid "The maximum temperature cannot exceed " -msgstr "最高温度不可超过 " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "最高温度不可超过 %d" -msgid "The minmum temperature should not be less than " -msgstr "最低温度不可低于 " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "最低温度不可低于 %d" msgid "Type to filter..." msgstr "输入以筛选……" @@ -4437,6 +4434,15 @@ msgstr "" "将临时 G-Code 复制到输出 G-Code 失败。也许 SD 卡被写锁定了？\n" "错误消息：%1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"将临时 G-code 复制到输出 G-code 失败。\n" +"错误信息：%1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "将临时 G-Code 复制到输出 G-Code 失败。目标设备可能有问题，请再次尝试导出或使用其他设备。损坏的输出 G-Code 在 %1%.tmp。" @@ -5174,10 +5180,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "值 %s 超出了范围，有效的范围是从 %d 到 %d 。" #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"%s%%还是%s %s？" +msgid "Is it %s%% or %s %s?" +msgstr "%s%%还是%s %s？" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5203,22 +5210,18 @@ msgstr "无效格式，应该是\"%1%\"这种数组格式" msgid "System agents" msgstr "系统代理" -# AI Translated -msgid "No plugin selected" -msgstr "未选择插件" - # AI Translated msgid "Add plugin" msgstr "添加插件" -# AI Translated -msgid "Select plugin" -msgstr "选择插件" - # AI Translated msgid "Remove plugin" msgstr "移除插件" +# AI Translated +msgid "No plugin selected" +msgstr "未选择插件" + # AI Translated msgid "Configure" msgstr "配置" @@ -5474,14 +5477,20 @@ msgstr "设置为最佳" msgid "Regroup filament" msgstr "重新组合耗材丝" -msgid "up to" -msgstr "达到" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "最高 %1% mm" -msgid "above" -msgstr "高于" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "高于 %1% mm" -msgid "from" -msgstr "从" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "从 %1% mm 到 %2% mm" msgid "Usage" msgstr "用法" @@ -5841,7 +5850,7 @@ msgstr "体积：" msgid "Size:" msgstr "尺寸：" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "发现G-code路径在层%d，高度为%.2lf mm处有冲突。请将有冲突的对象分离得更远(%s <-> %s)。" @@ -6153,11 +6162,13 @@ msgstr "项目另存为" msgid "Save current project as" msgstr "项目另存为" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "发布 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "导出内嵌所选设置的 3MF 文件" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "导入 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7411,6 +7422,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "底部" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "此设置未指定插件能力类型。" + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "此设置指定了无法识别的插件能力类型： " + msgid "Plugin Selection" msgstr "插件选择" @@ -7949,11 +7968,13 @@ msgstr "请确认这些预设中的G-codes是否安全，以防止对机器造 msgid "Customized Preset" msgstr "自定义的预设" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "部分已发布的设置无法应用：" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "部分耗材丝槽位已更改：" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "STEP 文件中的部件名称不是 UTF-8 格式！" @@ -8360,13 +8381,17 @@ msgstr "切片文件另存为：" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "文件%s已经发送到打印机的存储空间，可以在打印机上浏览。" +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "发布 3MF 文件为：" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"导出发布的 3MF 文件失败。\n" +"请检查该文件夹是否在线可用，或文件是否被其他程序打开。" msgid "Publish" msgstr "发布" @@ -8581,7 +8606,6 @@ msgstr "是否继续？" msgid "Language selection" msgstr "语言选择" - msgid "Asia-Pacific" msgstr "亚太" @@ -8679,6 +8703,9 @@ msgstr "当前实例路径" msgid "General" msgstr "常规" +msgid "Language" +msgstr "语言" + msgid "Metric" msgstr "公制（Metric）" @@ -9117,9 +9144,6 @@ msgstr "在切片预览中拖动图层滑块时，将当前图层下方的图层 msgid "Dimmed layer brightness" msgstr "调暗图层的亮度" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9519,63 +9543,80 @@ msgstr "正在上传数据" msgid "Jump to webpage" msgstr "跳转到网页" +# AI Translated msgid "Material" -msgstr "" +msgstr "材料" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "混合耗材丝" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "部分混合耗材丝依赖于不会被发布的耗材丝：" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "耗材丝 %d（混合）" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% 需要 %2%，但它未开启。" -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% 需要 %2%，但其材料不会被发布。" +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "要发布混合耗材丝，请开启它所使用的每一种耗材丝，并选择“完整发布”或满足其“类型”要求。" +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "仍然发布" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "发布 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "选择要在 3MF 文件中发布的设置" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "发布 3MF Wiki" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "发布 3MF 视频指南" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "混合耗材丝 - 在上方选择“开启”后将整体发布" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "发布此混合耗材丝，并开启 + 完整发布其组成耗材丝" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "在 3MF 文件中发布此耗材丝槽位" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "完整发布" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "将此槽位的整条耗材丝内嵌到 3MF 文件中" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "筛选未选项" #, c-format, boost-format msgid "Save %s as" @@ -9594,6 +9635,10 @@ msgstr "将父预设继承的所有数值复制到当前预设，并解除继承 msgid "Detach from parent" msgstr "与父级分离" +# AI Translated +msgid "Save without parent" +msgstr "不保留父级另存" + # AI Translated msgid "Unique preset" msgstr "独立预设" @@ -10264,9 +10309,17 @@ msgstr "结块检测需要 Prime 塔。没有主塔的模型可能存在缺陷 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "同时启用精确Z高度和擦拭塔可能会导致切片错误。您仍然要启用精确Z高度吗？" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "平滑模式的延时摄影需要每层都有擦拭塔，因此与“无稀疏层”不兼容。“无稀疏层”已关闭。" + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您想打开擦料塔吗？" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "“无稀疏层”与平滑模式的延时摄影不兼容，后者需要每层都有擦拭塔。延时摄影已切换为传统模式。" + msgid "Still print by object?" msgstr "仍然按对象打印吗？" @@ -10636,9 +10689,6 @@ msgstr "兼容的切片配置" msgid "Printable space" msgstr "可打印区域" -msgid "Printer Agent" -msgstr "打印机代理" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "为打印机通信选择网络代理。可用的代理将在启动时列出。" @@ -11040,14 +11090,6 @@ msgstr "挤出机数量" msgid "Capabilities" msgstr "能力" -# AI Translated -msgid "Left: " -msgstr "左: " - -# AI Translated -msgid "Right: " -msgstr "右: " - msgid "Show all presets (including incompatible)" msgstr "显示所有预设(包括不兼容的)" @@ -11892,15 +11934,22 @@ msgstr "修复被取消" msgid "Copying of file %1% to %2% failed: %3%" msgstr "从%1%拷贝文件到%2%失败：%3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "正在下载新的供应商配置： " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "配置包：%1% 已更新到 %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "下载供应商配置失败： " + msgid "Please check any unsaved changes before updating the configuration." msgstr "需要在配置更新之前检查没有保存的参数修改。" -msgid "Configuration package: " -msgstr "配置包：" - -msgid " updated to " -msgstr "更新到" - msgid "Open G-code file:" msgstr "打开G-code文件：" @@ -11960,11 +12009,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "输入整形仅受 Klipper、RepRapFirmware 和 Marlin 2 支持" -msgid "Grouping error: " -msgstr "分组错误：" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "分组错误：%1% 无法放入左喷嘴" -msgid " can not be placed in the " -msgstr "不能放置在" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "分组错误：%1% 无法放入右喷嘴" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12078,6 +12131,10 @@ msgstr "%1%离其它对象太近，可能会发生碰撞。" msgid "%1% is too tall, and collisions will be caused." msgstr "%1%太高，会发生碰撞。" +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "模型与擦拭塔的相对位置不满足“无稀疏层”功能的要求。请调整两者的相对位置、降低模型高度，或关闭“无稀疏层”。" + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "离不可打印区域太近，打印时可能会发生碰撞。" @@ -12421,6 +12478,9 @@ msgstr "使用 3MF 代替 G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "如果打印机接受 3MF 文件作为打印任务，请启用此选项。启用后，Orca Slicer 将以 .gcode.3mf 格式发送切片文件，而不是普通的 .gcode 文件。" +msgid "Printer Agent" +msgstr "打印机代理" + msgid "Select the network agent implementation for printer communication." msgstr "选择打印机通信的网络代理实施。" @@ -13427,6 +13487,10 @@ msgstr "直线排列" msgid "Concentric" msgstr "同心" +# AI Translated +msgid "Spiral Inset" +msgstr "螺旋内缩" + msgid "Hilbert Curve" msgstr "希尔伯特曲线" @@ -13522,13 +13586,13 @@ msgstr "顶面填充顺序" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充顶面的方向。\n" -"向外从表面中心开始，因此多余的材料会被推向边缘等最不显眼的位置。向内从边缘开始，并以中心处的紧密曲线结束。\n" -"默认使用最短路径排序，可能沿任一方向进行。" +"使用以中心为起点的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，顶面的填充方向。\n" +"向外从表面中心开始，多余的材料会被推向边缘，在那里最不显眼。向内从边缘开始，以中心处的紧密曲线结束。\n" +"默认使用最短路径排序，方向可能是两者中的任意一种。" # AI Translated msgid "Bottom surface fill order" @@ -13536,13 +13600,13 @@ msgstr "底面填充顺序" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充底面的方向。\n" -"向内以较宽的外侧曲线开始每个表面，这可以改善在热床上的首层附着，因为中心处的紧密曲线可能无法粘牢。向外从中心开始，将多余的材料推向边缘。\n" -"默认使用最短路径排序，可能沿任一方向进行。" +"使用以中心为起点的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，底面的填充方向。\n" +"向内让每个表面从较宽的外侧曲线开始，可改善首层在热床上的粘接，尤其当中心处的紧密曲线不易粘牢时。向外从中心开始，将多余的材料推向边缘。\n" +"默认使用最短路径排序，方向可能是两者中的任意一种。" msgid "Internal solid infill pattern" msgstr "内部实心填充图案" @@ -13645,6 +13709,14 @@ msgstr "逆时针" msgid "Clockwise" msgstr "顺时针" +# AI Translated +msgid "Distance to rod" +msgstr "到杆的距离" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "喷嘴尖端到杆较远一侧边缘的水平距离。用于逐件打印时的避障。" + msgid "Height to rod" msgstr "到横杆高度" @@ -15809,6 +15881,20 @@ msgstr "识别悬垂外墙" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "检测悬垂相对于线宽的百分比，并应用不同的速度打印。100%%的悬垂将使用桥接速度。" +# AI Translated +msgid "Print unsupported walls last" +msgstr "最后打印无支撑的墙" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"完全悬空的墙闭环会等到有东西能够承托它们时才打印：\n" +"无论墙的顺序如何，它们都在同一岛屿的其他墙之后挤出，从最内侧开始。\n" +"只能由本层桥接锚定的闭环会等待这些桥接打印完成；而沿着有支撑的墙延伸的闭环则保持在填充之前的位置，因为填充需要它作为锚点。" + msgid "Outer walls" msgstr "外墙" @@ -16248,6 +16334,39 @@ msgstr "闭环擦拭" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "为了最大限度地减少闭环挤出中接缝的可见性，在挤出机离开环之前，会向内执行一个小小的移动。" +# AI Translated +msgid "Wipe inward" +msgstr "向内擦拭" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"仅适用于外墙，包括孔洞边界。擦拭时将高温喷嘴移向已打印的内墙，以减少刚打印塑料的二次受热和接缝痕迹。\n" +"\n" +"在层高低于 0.1 mm 时尤其有用，此时擦拭痕迹更明显。\n" +"\n" +"若相邻内墙尚未打印（单墙区域或外墙/内墙顺序），或找不到有支撑的向内路径（例如在锐角或接缝间隙处），则使用常规擦拭。" + +# AI Translated +msgid "Wipe inward distance" +msgstr "向内擦拭距离" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"擦拭路径偏离外墙轮廓的距离，以毫米或实际外墙挤出宽度的百分比指定。\n" +"\n" +"例如，50% 会将路径偏移外墙宽度的一半。实际偏移量同时受实际外墙宽度和到相邻墙的可用间距限制，因此超过 100% 的值或等效的绝对距离不会产生额外效果。设为 0 可禁用偏移。" + msgid "Wipe before external loop" msgstr "额外的外墙打印前擦拭" @@ -16509,8 +16628,9 @@ msgstr "拾取新工具头后不等待其达到打印温度，直接移动到擦 msgid "No sparse layers (beta)" msgstr "无稀疏层 （实验功能）" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "如果启用，将不会在没有换色的层打印擦拭塔。存在换色的层时，挤出机将降低高度打印擦拭塔。用户应该确保不会与打印内容发生冲突。" +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "启用后，擦拭塔不会在没有换料的层上打印。在有换料的层上，挤出机会向下移动去打印擦拭塔，因此塔会低于模型，工具头必须向下伸到它那里。若这样会与已打印的对象发生碰撞，则该布局会被拒绝。对平滑模式的延时摄影或喷嘴结块检测无效，因为它们需要每层都有塔。" msgid "Prime all printing extruders" msgstr "所有挤出机画线" @@ -16536,6 +16656,34 @@ msgstr "" msgid "Cyclic" msgstr "循环" +# AI Translated +msgid "Cyclic order" +msgstr "循环顺序" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"循环换料排序所使用的自定义耗材丝序列，以逗号分隔的耗材丝编号表示（例如“3,2,1,4”）。\n" +"每一层按此序列打印其耗材丝；未列出的耗材丝最后打印，并按升序排列。\n" +"留空则按升序循环使用各耗材丝。" + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "对首层应用循环顺序" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"将循环换料顺序同样应用于首层。\n" +"默认关闭，因为首层改为按最佳热床粘接排序：打印首层细小脆弱特征的耗材丝会最后打印，这样后续的换料和空驶就不易将这些附着薄弱的部分蹭掉。若设置了自定义首层耗材丝序列，该首层顺序也会遵循它。循环顺序的好处（额外的换料让每层有更多冷却时间）并不适用于首层，因为首层为了粘接会以慢速高温打印。\n" +"仅当你需要包括首层在内的每一层都使用完全相同的换料顺序时才启用此项，代价是失去上述粘接优化。" + msgid "Slice gap closing radius" msgstr "切片间隙闭合半径" @@ -16545,9 +16693,6 @@ msgstr "在三角形网格切片过程中，小于2倍间隙闭合半径的裂 msgid "Slicing Mode" msgstr "切片模式" -msgid "Other" -msgstr "其他" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "对3DLabPrint的飞机模型使用 \"奇偶\"。使用 \"闭孔 \"来关闭模型上的所有孔。" @@ -17541,6 +17686,14 @@ msgstr "不进行检查" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "不运行任何有效性检查，例如G-code路径冲突检查。" +# AI Translated +msgid "Strict mode" +msgstr "严格模式" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "当切片产生原本仅记入日志的非严重警告时（例如禁用支撑却需要支撑的模型），以非零状态码退出。请在绝不能交付存在隐蔽缺陷切片结果的 CI 或脚本流程中使用。每条此类警告还会以稳定的类别列在 result.json 的 `warnings` 数组中，该文件仅在 Linux 上生成。不能与 --no-check 同时使用，后者会跳过支撑检查。" + msgid "Normative check" msgstr "规范性检查" @@ -17553,11 +17706,28 @@ msgstr "输出模型信息" msgid "This outputs the model’s information." msgstr "输出模型的信息。" +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "检查网格（JSON 输出到 stdout）" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "将每个已加载对象的 JSON 摘要输出到 stdout，然后退出：包括其包围盒，以及可供放置的凸包面及其法线、面积和中心。--ground-* 选项正是从这些面中选择。--info 的机器可读替代方案。" + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "检查绘制（JSON 输出到 stdout）" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "输出已加载模型上已保存的每个绘制图层（支撑、接缝、MMU 颜色、绒毛表面）的结构化 JSON 摘要 — 每种状态的面片数量、表面积和网格局部包围盒 — 然后退出。在图形界面中打开绘制工具的机器可读替代方案。" + msgid "Export Settings" msgstr "导出配置" -msgid "This exports settings to a file." -msgstr "导出配置到文件。" +# AI Translated +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "将设置导出到文件。使用 - 可将其写入 stdout。" msgid "Send progress to pipe" msgstr "将进度发送到管道" @@ -17613,6 +17783,30 @@ msgstr "绕 Y 旋转" msgid "Rotation angle around the Y axis in degrees." msgstr "绕 Y 轴的旋转角度（以度为单位）" +# AI Translated +msgid "Ground largest face" +msgstr "以最大面着床" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "将每个对象以其凸包的最大面放置，并落到热床上。若有多个同样大的面，则保留已经朝下的那一个。没有足够大可供放置的面的对象保持原样。变换按命令行中的先后顺序执行，因此在此选项之前给出的旋转会被保留。--orient 1 在所有变换之后执行，并会替换朝向。" + +# AI Translated +msgid "Ground face by normal" +msgstr "按法线以指定面着床" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "将每个对象以其凸包中外法线最接近方向 NX,NY,NZ 的面放置，并落到热床上。该方向使用对象坐标系，其中包含在此选项之前给出的旋转；除非输入文件旋转了该对象，否则它与打印板的坐标轴一致。例如，1,0,0 会让对象以 +X 面站立。--orient 1 在所有变换之后执行，并会替换朝向。" + +# AI Translated +msgid "Ground face at point" +msgstr "以指定点所在面着床" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "将每个对象以其凸包中包含点 X,Y,Z 的面放置，并落到热床上。该点使用对象坐标系，其中包含在此选项之前给出的旋转；--inspect-mesh 报告的面中心也使用该坐标系。没有此类面的对象保持原样；若所有对象都没有此类面，则本次运行失败。--orient 1 在所有变换之后执行，并会替换朝向。" + msgid "Scale the model by a float factor." msgstr "根据因数缩放模型" @@ -20709,14 +20903,17 @@ msgstr "此操作无法撤消。继续？" msgid "Skipping objects." msgstr "跳过对象。" +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "材料比例" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "模型高度" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "比例" msgid "Select Filament" msgstr "选择耗材" @@ -20974,12 +21171,14 @@ msgid "Drying-Dehumidifying" msgstr "干燥-除湿" # AI Translated -msgid " maximum drying temperature is " -msgstr " 最高干燥温度为 " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s 的最高干燥温度为 %d°C。" # AI Translated -msgid " minimum drying temperature is " -msgstr " 最低干燥温度为 " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s 的最低干燥温度为 %d°C。" # AI Translated msgid "This filament may not be completely dried." @@ -21424,6 +21623,97 @@ msgstr "" "避免翘曲\n" "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。" +#~ msgid "Other" +#~ msgstr "其他" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "左: " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "右: " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "最高温度不可超过 " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "最低温度不可低于 " + +#~ msgid "up to" +#~ msgstr "达到" + +#~ msgid "above" +#~ msgstr "高于" + +#~ msgid "from" +#~ msgstr "从" + +#~ msgid "Configuration package: " +#~ msgstr "配置包：" + +#~ msgid " updated to " +#~ msgstr "更新到" + +#~ msgid "Grouping error: " +#~ msgstr "分组错误：" + +#~ msgid " can not be placed in the " +#~ msgstr "不能放置在" + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " 最高干燥温度为 " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " 最低干燥温度为 " + +# AI Translated +#~ msgid "needs" +#~ msgstr "需要" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "未开启" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "材料未发布" + +#~ msgid "Select the language" +#~ msgstr "选择语言" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "选择插件" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充顶面的方向。\n" +#~ "向外从表面中心开始，因此多余的材料会被推向边缘等最不显眼的位置。向内从边缘开始，并以中心处的紧密曲线结束。\n" +#~ "默认使用最短路径排序，可能沿任一方向进行。" + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "使用基于中心的图案（同心、阿基米德和弦、八角螺旋）时填充底面的方向。\n" +#~ "向内以较宽的外侧曲线开始每个表面，这可以改善在热床上的首层附着，因为中心处的紧密曲线可能无法粘牢。向外从中心开始，将多余的材料推向边缘。\n" +#~ "默认使用最短路径排序，可能沿任一方向进行。" + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "如果启用，将不会在没有换色的层打印擦拭塔。存在换色的层时，挤出机将降低高度打印擦拭塔。用户应该确保不会与打印内容发生冲突。" + +#~ msgid "This exports settings to a file." +#~ msgstr "导出配置到文件。" + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "原生 Wayland 实时画面需要 GStreamer GTK 视频接收器。请安装 GStreamer 的 gtksink 插件，然后重启 OrcaSlicer。" diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index e0e468fccf..b60602ca38 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-03 10:27+0800\n" +"POT-Creation-Date: 2026-09-17 12:41-0300\n" "PO-Revision-Date: 2025-11-28 13:48-0600\n" "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n" "Language-Team: \n" @@ -2425,13 +2425,6 @@ msgstr "有可用的更新。請開啟預設組合對話框進行更新。" msgid "%s has been removed." msgstr "%s 已移除。" - -msgid "Select the language" -msgstr "選擇語言" - -msgid "Language" -msgstr "語言" - # AI Translated #, c-format, boost-format msgid "Switching Orca Slicer to language %s failed." @@ -3670,11 +3663,15 @@ msgstr "在 Filament Track Switch 退回目前線材" msgid "Switch track at Filament Track Switch" msgstr "在 Filament Track Switch 切換軌道" -msgid "The maximum temperature cannot exceed " -msgstr "最高溫度不能超過 " +# AI Translated +#, c-format, boost-format +msgid "The maximum temperature cannot exceed %d" +msgstr "最高溫度不能超過 %d" -msgid "The minmum temperature should not be less than " -msgstr "最低溫度不應低於 " +# AI Translated +#, c-format, boost-format +msgid "The minimum temperature should not be less than %d" +msgstr "最低溫度不應低於 %d" msgid "Type to filter..." msgstr "輸入以篩選..." @@ -4550,6 +4547,15 @@ msgstr "" "錯誤訊息：%1%將臨時的 G-code 複製到輸出的 G-code 失敗 ，也許 SD 卡寫入被鎖定？\n" "錯誤訊息：%1%" +# AI Translated +#, boost-format +msgid "" +"Copying of the temporary G-code to the output G-code failed.\n" +"Error message: %1%" +msgstr "" +"將暫存 G-code 複製到輸出 G-code 失敗。\n" +"錯誤訊息：%1%" + #, boost-format msgid "Copying of the temporary G-code to the output G-code failed. There might be problem with target device, please try exporting again or using different device. The corrupted output G-code is at %1%.tmp." msgstr "將臨時 G-code 複製到輸出 G-code 時失敗。目標裝置可能存在問題，請嘗試再次匯出或使用不同的裝置。損壞的 G-code 已輸出為 %1%.tmp。將臨時 G-code 複製到輸出 G-code 時失敗。目標裝置可能存在問題，請嘗試再次匯出或使用不同的裝置。損壞的 G-code 已輸出為 %1%.tmp。" @@ -5303,10 +5309,11 @@ msgid "Value %s is out of range. The valid range is from %d to %d." msgstr "數值 %s 超出範圍。有效範圍是從 %d 到 %d。" #, c-format, boost-format -msgid "" -"Is it %s%% or %s %s?" -msgstr "" -"是 %s%% 還是 %s %s？" +msgid "Is it %s%% or %s %s?" +msgstr "是 %s%% 還是 %s %s？" + +msgid "%" +msgstr "%" #, boost-format msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" @@ -5332,22 +5339,18 @@ msgstr "無效格式，應該是「%1%」這種格式" msgid "System agents" msgstr "系統代理程式" -# AI Translated -msgid "No plugin selected" -msgstr "未選擇外掛" - # AI Translated msgid "Add plugin" msgstr "新增外掛" -# AI Translated -msgid "Select plugin" -msgstr "選擇外掛" - # AI Translated msgid "Remove plugin" msgstr "移除外掛" +# AI Translated +msgid "No plugin selected" +msgstr "未選擇外掛" + # AI Translated msgid "Configure" msgstr "設定" @@ -5603,14 +5606,20 @@ msgstr "設為最佳" msgid "Regroup filament" msgstr "重新分組線材" -msgid "up to" -msgstr "達到" +# AI Translated +#, boost-format +msgid "up to %1% mm" +msgstr "最高 %1% mm" -msgid "above" -msgstr "高於" +# AI Translated +#, boost-format +msgid "above %1% mm" +msgstr "高於 %1% mm" -msgid "from" -msgstr "從" +# AI Translated +#, boost-format +msgid "from %1% to %2% mm" +msgstr "從 %1% mm 到 %2% mm" msgid "Usage" msgstr "使用情況" @@ -5970,7 +5979,7 @@ msgstr "體積：" msgid "Size:" msgstr "尺寸：" -#, boost-format +#, c-format, boost-format msgid "Conflicts of G-code paths have been found at layer %d, Z = %.2lfmm. Please separate the conflicted objects farther (%s <-> %s)." msgstr "發現 G-code 路徑在 %d 層，Z = %.2lf mm 處的衝突。請將有衝突的物件分離得更遠（%s <-> %s）。" @@ -6283,11 +6292,13 @@ msgstr "另存專案為" msgid "Save current project as" msgstr "將目前專案另存為" +# AI Translated msgid "Publish 3MF" -msgstr "" +msgstr "發布 3MF" +# AI Translated msgid "Export a 3MF file with the selected settings embedded" -msgstr "" +msgstr "匯出內嵌所選設定的 3MF 檔案" msgid "Import 3MF/STL/STEP/SVG/OBJ/AMF" msgstr "匯入 3MF/STL/STEP/SVG/OBJ/AMF" @@ -7550,6 +7561,14 @@ msgctxt "Layers" msgid "Bottom" msgstr "底部" +# AI Translated +msgid "This setting does not specify a plugin capability type." +msgstr "此設定未指定外掛能力類型。" + +# AI Translated +msgid "This setting specifies an unrecognized plugin capability type: " +msgstr "此設定指定了無法識別的外掛能力類型： " + # AI Translated msgid "Plugin Selection" msgstr "外掛選擇" @@ -8110,11 +8129,13 @@ msgstr "請確認這些預設中的 G-code 是安全的，以防止對列印裝 msgid "Customized Preset" msgstr "自訂預設" +# AI Translated msgid "Some published settings could not be applied:" -msgstr "" +msgstr "部分已發布的設定無法套用：" +# AI Translated msgid "Some filament slots were changed:" -msgstr "" +msgstr "部分線材槽位已變更：" msgid "Component name(s) inside step file not in UTF-8 format!" msgstr "STEP 檔案內部元件的名稱不是 UTF-8 格式！" @@ -8526,13 +8547,17 @@ msgstr "切片檔案另存為：" msgid "The file %s has been sent to the printer's storage space and can be viewed on the printer." msgstr "檔案 %s 已經傳送到列印裝置的儲存空間，可以在列印裝置上瀏覽。" +# AI Translated msgid "Publish 3MF file as:" -msgstr "" +msgstr "發布 3MF 檔案為：" +# AI Translated msgid "" "Failed to export the published 3MF file.\n" "Please check whether the folder exists online or if other programs have the file open." msgstr "" +"匯出已發布的 3MF 檔案失敗。\n" +"請檢查該資料夾是否在線上可用，或檔案是否被其他程式開啟。" msgid "Publish" msgstr "發布" @@ -8747,7 +8772,6 @@ msgstr "是否繼續？" msgid "Language selection" msgstr "語言選擇" - msgid "Asia-Pacific" msgstr "亞太" @@ -8852,6 +8876,9 @@ msgstr "目前實例路徑：" msgid "General" msgstr "一般" +msgid "Language" +msgstr "語言" + msgid "Metric" msgstr "公制" @@ -9290,9 +9317,6 @@ msgstr "在切片預覽中拖曳層滑桿時，將目前層以下的各層算繪 msgid "Dimmed layer brightness" msgstr "變暗層的亮度" -msgid "%" -msgstr "%" - # AI Translated msgid "" "How brightly the dimmed layers are rendered when \"Dim lower layers\" is enabled.\n" @@ -9692,63 +9716,80 @@ msgstr "正在上傳資料" msgid "Jump to webpage" msgstr "跳至網頁" +# AI Translated msgid "Material" -msgstr "" +msgstr "材料" +# AI Translated msgid "Mixed filament" -msgstr "" +msgstr "混合線材" +# AI Translated msgid "Some mixed filaments rely on filaments that will not be published:" -msgstr "" +msgstr "部分混合線材依賴不會被發布的線材：" +# AI Translated #, c-format, boost-format msgid "Filament %d (mixed)" -msgstr "" +msgstr "線材 %d（混合）" -msgid "needs" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, which is not enabled." +msgstr "%1% 需要 %2%，但它未啟用。" -msgid "not enabled" -msgstr "" - -msgid "material not published" -msgstr "" +# AI Translated +#, boost-format +msgid "%1% needs %2%, whose material will not be published." +msgstr "%1% 需要 %2%，但其材料不會被發布。" +# AI Translated msgid "To publish a mixed filament, enable every filament it uses and choose Full Publish or check its Type requirement." -msgstr "" +msgstr "若要發布混合線材，請啟用它所使用的每一種線材，並選擇「完整發布」或滿足其「類型」需求。" +# AI Translated msgid "Publish anyway" -msgstr "" +msgstr "仍要發布" +# AI Translated msgid "Publish 3MF..." -msgstr "" +msgstr "發布 3MF..." +# AI Translated msgid "Select which settings to be published in the 3MF file" -msgstr "" +msgstr "選擇要在 3MF 檔案中發布的設定" +# AI Translated msgid "Publish 3MF Wiki" -msgstr "" +msgstr "發布 3MF Wiki" +# AI Translated msgid "Publish 3MF Video Guide" -msgstr "" +msgstr "發布 3MF 影片指南" +# AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "" +msgstr "混合線材 - 在上方選擇「啟用」後將整體發布" +# AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "" +msgstr "發布此混合線材，並啟用 + 完整發布其組成線材" +# AI Translated msgid "Publish this filament slot in the 3MF file" -msgstr "" +msgstr "在 3MF 檔案中發布此線材槽位" +# AI Translated msgid "Full Publish" -msgstr "" +msgstr "完整發布" +# AI Translated msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "" +msgstr "將此槽位的整條線材內嵌到 3MF 檔案中" +# AI Translated msgid "Filter non-selected" -msgstr "" +msgstr "篩選未選項" #, c-format, boost-format msgid "Save %s as" @@ -9767,6 +9808,10 @@ msgstr "將父配置繼承的所有數值複製到目前的配置，並解除繼 msgid "Detach from parent" msgstr "從父預設分離" +# AI Translated +msgid "Save without parent" +msgstr "不保留父預設另存" + # AI Translated msgid "Unique preset" msgstr "獨立配置" @@ -10470,9 +10515,17 @@ msgstr "堵塞偵測需要換料塔。若沒有換料塔，列印物件上可能 msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" msgstr "同時啟用精確 Z 高度和擦拭塔可能會導致切片錯誤。您仍然要啟用精確 Z 高度嗎？" +# AI Translated +msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." +msgstr "平滑模式的縮時攝影需要每層都有換料塔，因此與「取消稀疏層」不相容。「取消稀疏層」已關閉。" + msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" msgstr "平滑模式的縮時錄影需要換料塔，否則列印物件上可能會有瑕疵。您是否要啟用換料塔？" +# AI Translated +msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." +msgstr "「取消稀疏層」與平滑模式的縮時攝影不相容，後者需要每層都有換料塔。縮時攝影已切換為傳統模式。" + msgid "Still print by object?" msgstr "持續逐件列印？" @@ -10842,9 +10895,6 @@ msgstr "相容的切片設定" msgid "Printable space" msgstr "可列印區域" -msgid "Printer Agent" -msgstr "列印裝置代理" - msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." msgstr "選擇列印裝置通訊的網路代理實施。可用代理在啟動時註冊。" @@ -11246,14 +11296,6 @@ msgstr "擠出機數量" msgid "Capabilities" msgstr "能力" -# AI Translated -msgid "Left: " -msgstr "左： " - -# AI Translated -msgid "Right: " -msgstr "右： " - msgid "Show all presets (including incompatible)" msgstr "顯示所有預設（包括不相容的）" @@ -12096,15 +12138,22 @@ msgstr "修復被取消" msgid "Copying of file %1% to %2% failed: %3%" msgstr "從 %1% 複製檔案到 %2% 失敗：%3%" +# AI Translated +msgid "Downloading new vendor profile(s): " +msgstr "正在下載新的廠牌設定檔： " + +# AI Translated +#, boost-format +msgid "Configuration package: %1% updated to %2%" +msgstr "設定檔：%1% 已更新到 %2%" + +# AI Translated +msgid "Failed to download vendor profile(s): " +msgstr "下載廠牌設定檔失敗： " + msgid "Please check any unsaved changes before updating the configuration." msgstr "在設定更新之前需要檢查未儲存的設定變更。" -msgid "Configuration package: " -msgstr "設定檔：" - -msgid " updated to " -msgstr "更新到 " - msgid "Open G-code file:" msgstr "開啟 G-code 檔案：" @@ -12164,11 +12213,15 @@ msgstr "" msgid "Input shaping is only supported by Klipper, RepRapFirmware and Marlin 2." msgstr "輸入整形僅受 Klipper、RepRapFirmware 和 Marlin 2 支援" -msgid "Grouping error: " -msgstr "分組錯誤：" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the left nozzle" +msgstr "分組錯誤：%1% 無法放入左噴嘴" -msgid " can not be placed in the " -msgstr "無法放置於" +# AI Translated +#, boost-format +msgid "Grouping error: %1% cannot be placed in the right nozzle" +msgstr "分組錯誤：%1% 無法放入右噴嘴" # AI Translated msgid "Group error in manual mode. Please check nozzle count or regroup." @@ -12282,6 +12335,10 @@ msgstr "%1% 離其它物件太近，可能會發生碰撞。" msgid "%1% is too tall, and collisions will be caused." msgstr "%1% 太高，會發生碰撞。" +# AI Translated +msgid "The relative position of the model and the prime tower does not meet the requirements of the \"No sparse layers\" feature. Please adjust their relative positions, lower the model height, or turn off \"No sparse layers\"." +msgstr "模型與換料塔的相對位置不符合「取消稀疏層」功能的需求。請調整兩者的相對位置、降低模型高度，或關閉「取消稀疏層」。" + msgid " is too close to exclusion area, there may be collisions when printing." msgstr "離淨空區域太近，列印時可能會發生碰撞。" @@ -12625,6 +12682,9 @@ msgstr "使用 3MF 取代 G-code" msgid "Enable this if the printer accepts a 3MF file as the print job. When enabled, Orca Slicer sends the sliced file as a .gcode.3mf, instead of a plain .gcode file." msgstr "若列印裝置接受 3MF 檔案作為列印作業，請啟用此選項。啟用後，Orca Slicer 會將切片後的檔案以 .gcode.3mf 形式傳送，而非單純的 .gcode 檔案。" +msgid "Printer Agent" +msgstr "列印裝置代理" + msgid "Select the network agent implementation for printer communication." msgstr "選擇用於列印裝置通訊的網路代理實作。" @@ -13642,6 +13702,10 @@ msgstr "直線排列" msgid "Concentric" msgstr "同心" +# AI Translated +msgid "Spiral Inset" +msgstr "螺旋內縮" + msgid "Hilbert Curve" msgstr "希爾伯特曲線" @@ -13733,13 +13797,13 @@ msgstr "頂面填充順序" # AI Translated msgid "" -"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which top surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，頂面填充的方向。\n" -"「向外」從表面中心開始，因此多餘的材料會被推向最不明顯的邊緣。「向內」從邊緣開始，並以中心的緊密曲線結束。\n" -"預設使用最短路徑排序，方向可能為任一種。" +"使用以中心為起點的圖案（同心、螺旋內縮、阿基米德和弦、八角螺旋）時，頂面的填充方向。\n" +"向外從表面中心開始，多餘的材料會被推向邊緣，在該處最不明顯。向內從邊緣開始，並以中心處的緊密曲線結束。\n" +"預設使用最短路徑排序，方向可能為兩者之一。" # AI Translated msgid "Bottom surface fill order" @@ -13747,13 +13811,13 @@ msgstr "底面填充順序" # AI Translated msgid "" -"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +"Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Spiral Inset, Archimedean Chords, Octagram Spiral).\n" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，底面填充的方向。\n" -"「向內」讓每個表面從較寬的外側曲線開始，可改善中心緊密曲線可能無法附著的列印板上的第一層附著。「向外」從中心開始，將多餘的材料推向邊緣。\n" -"預設使用最短路徑排序，方向可能為任一種。" +"使用以中心為起點的圖案（同心、螺旋內縮、阿基米德和弦、八角螺旋）時，底面的填充方向。\n" +"向內讓每個表面從較寬的外側曲線開始，可改善首層在列印板上的黏著，尤其當中心處的緊密曲線不易黏牢時。向外從中心開始，將多餘的材料推向邊緣。\n" +"預設使用最短路徑排序，方向可能為兩者之一。" msgid "Internal solid infill pattern" msgstr "內部實心填充圖案" @@ -13852,6 +13916,14 @@ msgstr "逆時針" msgid "Clockwise" msgstr "順時針" +# AI Translated +msgid "Distance to rod" +msgstr "至桿件的距離" + +# AI Translated +msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." +msgstr "噴嘴尖端到桿件較遠一側邊緣的水平距離。用於逐件列印時的避障。" + msgid "Height to rod" msgstr "到橫杆高度" @@ -16016,6 +16088,20 @@ msgstr "偵測懸空外牆" msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." msgstr "偵測懸空相對於線寬的百分比，並套用不同的速度列印。100%% 的懸空將使用橋接速度。" +# AI Translated +msgid "Print unsupported walls last" +msgstr "最後列印無支撐的牆" + +# AI Translated +msgid "" +"Wall loops that lie entirely in mid air are printed once something can hold them:\n" +"they are extruded after the other walls of their island, innermost first, whatever the wall order is.\n" +"A loop that only the bridges of this layer can anchor waits until those bridges are printed, while a loop running alongside a supported wall keeps its place before the infill, which needs it as an anchor." +msgstr "" +"完全懸空的牆迴圈會等到有東西能夠承托它們時才列印：\n" +"無論牆的順序為何，它們都在同一島嶼的其他牆之後擠出，從最內側開始。\n" +"只能由本層橋接錨定的迴圈會等待這些橋接列印完成；而沿著有支撐的牆延伸的迴圈則保持在填充之前的位置，因為填充需要它作為錨點。" + msgid "Outer walls" msgstr "外牆" @@ -16451,6 +16537,39 @@ msgstr "閉環擦拭" msgid "To minimize the visibility of the seam in a closed loop extrusion, a small inward movement is executed before the extruder leaves the loop." msgstr "為了降低閉環擠出中接縫的可見性，在擠出機退出閉環前會進行一次微小的內縮移動。" +# AI Translated +msgid "Wipe inward" +msgstr "向內擦拭" + +# AI Translated +msgid "" +"Applies only to external walls, including hole boundaries. Moves the hot nozzle toward printed inner walls during wiping to reduce reheating of freshly printed plastic and seam marks.\n" +"\n" +"Especially useful at layer heights below 0.1 mm, where wipe marks are more visible.\n" +"\n" +"Uses the regular wipe if no adjacent inner wall is already printed (single-wall areas or Outer/Inner wall order), or if no supported inward path can be found, for example at tight corners or seam gaps." +msgstr "" +"僅適用於外牆，包括孔洞邊界。擦拭時將高溫噴嘴移向已列印的內牆，以減少剛列印塑膠的二次受熱與接縫痕跡。\n" +"\n" +"在層高低於 0.1 mm 時特別有用，此時擦拭痕跡更明顯。\n" +"\n" +"若相鄰內牆尚未列印（單牆區域或外牆/內牆順序），或找不到有支撐的向內路徑（例如在銳角或接縫間隙處），則使用一般擦拭。" + +# AI Translated +msgid "Wipe inward distance" +msgstr "向內擦拭距離" + +# AI Translated +#, no-c-format, no-boost-format +msgid "" +"The distance the wipe path is shifted away from the external perimeter, specified in millimeters or as a percentage of the actual outer-wall extrusion width.\n" +"\n" +"For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited by both the actual outer-wall width and the available spacing to the adjacent wall, so values above 100% or an equivalent absolute distance have no additional effect. Set to 0 to disable the offset." +msgstr "" +"擦拭路徑偏離外牆輪廓的距離，以公釐或實際外牆擠出寬度的百分比指定。\n" +"\n" +"例如，50% 會將路徑偏移外牆寬度的一半。實際偏移量同時受實際外牆寬度與到相鄰牆的可用間距限制，因此超過 100% 的值或等效的絕對距離不會產生額外效果。設為 0 可停用偏移。" + msgid "Wipe before external loop" msgstr "外牆迴圈前的擦拭動作" @@ -16705,8 +16824,9 @@ msgstr "取用新工具時不等待其達到列印溫度，先移動到換料塔 msgid "No sparse layers (beta)" msgstr "取消稀疏層（Beta）" -msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." -msgstr "啟用此選項後，換料塔將不會在沒有工具更換的層中列印。在有工具更換的層中，擠出機將向下移動以列印換料塔。請使用者自行確保清洗塔與列印物之間不會發生碰撞。" +# AI Translated +msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." +msgstr "啟用後，換料塔不會在沒有換工具的層上列印。在有換工具的層上，擠出機會向下移動去列印換料塔，因此塔會低於模型，工具頭必須向下伸到該處。若這樣會與已列印的物件發生碰撞，該配置將被拒絕。對平滑模式的縮時攝影或噴嘴結塊偵測無效，因為它們需要每層都有塔。" msgid "Prime all printing extruders" msgstr "所有擠出機畫線" @@ -16732,6 +16852,34 @@ msgstr "" msgid "Cyclic" msgstr "循環" +# AI Translated +msgid "Cyclic order" +msgstr "循環順序" + +# AI Translated +msgid "" +"Custom filament sequence used by the cyclic toolchange ordering, as filament numbers separated by commas (e.g. \"3,2,1,4\").\n" +"Each layer prints its filaments following this sequence; filaments not listed are printed last, in ascending order.\n" +"Leave empty to cycle through the filaments in ascending order." +msgstr "" +"循環換工具排序所使用的自訂線材序列，以逗號分隔的線材編號表示（例如「3,2,1,4」）。\n" +"每一層依此序列列印其線材；未列出的線材最後列印，並依遞增順序排列。\n" +"留空則依遞增順序循環使用各線材。" + +# AI Translated +msgid "Apply cyclic order to first layer" +msgstr "對首層套用循環順序" + +# AI Translated +msgid "" +"Applies the cyclic toolchange order to the first layer as well.\n" +"By default this is disabled, because the first layer is instead ordered for the best bed adhesion: filaments that print small, fragile first-layer features are printed last, so the following tool changes and travel moves are less likely to knock those weakly anchored parts loose. This first-layer order also honors a custom first layer filament sequence when one is set. The cyclic order's benefit (extra tool changes give each layer more time to cool) does not apply to the first layer, which is printed slowly and hot for adhesion.\n" +"Enable this only if you need the exact same tool sequence on every layer, including the first, at the cost of that adhesion optimization." +msgstr "" +"將循環換工具順序同樣套用於首層。\n" +"預設為關閉，因為首層改為依最佳列印板黏著排序：列印首層細小脆弱特徵的線材會最後列印，如此後續的換工具與空駛就不易將這些附著薄弱的部分蹭掉。若已設定自訂首層線材序列，此首層順序也會遵循它。循環順序的好處（額外的換工具讓每層有更多冷卻時間）並不適用於首層，因為首層為了黏著會以慢速高溫列印。\n" +"僅當你需要包含首層在內的每一層都使用完全相同的換工具順序時才啟用此項，代價是失去上述黏著最佳化。" + msgid "Slice gap closing radius" msgstr "切片間隙閉合半徑" @@ -16741,9 +16889,6 @@ msgstr "在三角網格切片過程中，寬度小於 2 倍間隙閉合半徑的 msgid "Slicing Mode" msgstr "切片模式" -msgid "Other" -msgstr "其他" - msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." msgstr "針對 3DLabPrint 飛機模型，請選擇『奇偶』模式。若需閉合模型中的所有孔洞，請啟用『閉合孔洞』選項。" @@ -17729,6 +17874,14 @@ msgstr "不檢查" msgid "Do not run any validity checks, such as G-code path conflicts check." msgstr "不要執行任何有效性檢查，如 G-code 路徑衝突檢查。" +# AI Translated +msgid "Strict mode" +msgstr "嚴格模式" + +# AI Translated +msgid "Exit non-zero when slicing raises a non-critical warning that is otherwise only logged, such as a model that needs support while support is disabled. Use this in CI or scripted pipelines that should never ship a subtly broken slice. Each such warning is also listed with a stable class in the `warnings` array of result.json, which is written on Linux only. Cannot be combined with --no-check, which skips the support check." +msgstr "當切片產生原本僅記入日誌的非嚴重警告時（例如停用支撐卻需要支撐的模型），以非零狀態碼結束。請在絕不能交付存在隱蔽缺陷切片結果的 CI 或指令碼流程中使用。每一則此類警告還會以穩定的類別列在 result.json 的 `warnings` 陣列中，該檔案僅在 Linux 上產生。不能與 --no-check 同時使用，後者會略過支撐檢查。" + msgid "Normative check" msgstr "規範符合性偵測" @@ -17741,12 +17894,28 @@ msgstr "輸出模型資訊" msgid "This outputs the model’s information." msgstr "輸出模型資訊。" +# AI Translated +msgid "Inspect mesh (JSON to stdout)" +msgstr "檢查網格（JSON 輸出至 stdout）" + +# AI Translated +msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." +msgstr "將每個已載入物件的 JSON 摘要輸出至 stdout，然後結束：包括其邊界框，以及可供放置的凸包面及其法線、面積與中心。--ground-* 選項正是從這些面中選擇。--info 的機器可讀替代方案。" + +# AI Translated +msgid "Inspect paint (JSON to stdout)" +msgstr "檢查繪製（JSON 輸出至 stdout）" + +# AI Translated +msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." +msgstr "輸出已載入模型上已儲存的每個繪製圖層（支撐、接縫、MMU 顏色、絨毛表面）的結構化 JSON 摘要 — 每種狀態的面片數量、表面積與網格局部邊界框 — 然後結束。在圖形介面中開啟繪製工具的機器可讀替代方案。" + msgid "Export Settings" msgstr "匯出設定" # AI Translated -msgid "This exports settings to a file." -msgstr "將設定匯出至檔案。" +msgid "This exports settings to a file. Use - to write them to stdout." +msgstr "將設定匯出至檔案。使用 - 可將其寫入 stdout。" msgid "Send progress to pipe" msgstr "將進度傳送到 Pipe" @@ -17802,6 +17971,30 @@ msgstr "繞 Y 旋轉" msgid "Rotation angle around the Y axis in degrees." msgstr "繞 Y 軸的旋轉角度（以度為單位）。" +# AI Translated +msgid "Ground largest face" +msgstr "以最大面著床" + +# AI Translated +msgid "Lay each object on the largest face of its convex hull and drop it onto the bed. Of equally large faces, the one already facing down is kept. Objects without a face large enough to rest on are left as they are. Transforms run in command-line order, so rotations given before this option are respected. --orient 1 runs after all transforms and replaces the orientation." +msgstr "將每個物件以其凸包的最大面放置，並落到列印板上。若有多個同樣大的面，則保留已經朝下的那一個。沒有足夠大可供放置的面的物件維持原狀。變換依命令列中的先後順序執行，因此在此選項之前給定的旋轉會被保留。--orient 1 在所有變換之後執行，並會取代定向。" + +# AI Translated +msgid "Ground face by normal" +msgstr "依法線以指定面著床" + +# AI Translated +msgid "Lay each object on the convex hull face whose outward normal is closest to the direction NX,NY,NZ and drop it onto the bed. The direction is in object coordinates, which include the rotations given before this option and match the plate axes unless the input file rotates the object. For example, 1,0,0 stands the object on its +X side. --orient 1 runs after all transforms and replaces the orientation." +msgstr "將每個物件以其凸包中外法線最接近方向 NX,NY,NZ 的面放置，並落到列印板上。該方向使用物件座標系，其中包含在此選項之前給定的旋轉；除非輸入檔案旋轉了該物件，否則它與列印板的座標軸一致。例如，1,0,0 會讓物件以 +X 面站立。--orient 1 在所有變換之後執行，並會取代定向。" + +# AI Translated +msgid "Ground face at point" +msgstr "以指定點所在面著床" + +# AI Translated +msgid "Lay each object on the convex hull face that contains the point X,Y,Z and drop it onto the bed. The point is in object coordinates, which include the rotations given before this option; --inspect-mesh reports face centers in them. Objects without such a face are left as they are, and the run fails if no object has one. --orient 1 runs after all transforms and replaces the orientation." +msgstr "將每個物件以其凸包中包含點 X,Y,Z 的面放置，並落到列印板上。該點使用物件座標系，其中包含在此選項之前給定的旋轉；--inspect-mesh 回報的面中心也使用該座標系。沒有此類面的物件維持原狀；若所有物件都沒有此類面，則本次執行失敗。--orient 1 在所有變換之後執行，並會取代定向。" + msgid "Scale the model by a float factor." msgstr "依浮點數比例縮放模型" @@ -20902,14 +21095,17 @@ msgstr "此操作無法撤消。繼續？" msgid "Skipping objects." msgstr "跳過物件。" +# AI Translated msgid "Material Ratio" -msgstr "" +msgstr "材料比例" +# AI Translated msgid "Model Height" -msgstr "" +msgstr "模型高度" +# AI Translated msgid "Ratio" -msgstr "" +msgstr "比例" msgid "Select Filament" msgstr "選擇線材" @@ -21167,12 +21363,14 @@ msgid "Drying-Dehumidifying" msgstr "烘乾—除濕" # AI Translated -msgid " maximum drying temperature is " -msgstr " 最高烘乾溫度為 " +#, c-format, boost-format +msgid "%s maximum drying temperature is %d°C." +msgstr "%s 的最高烘乾溫度為 %d°C。" # AI Translated -msgid " minimum drying temperature is " -msgstr " 最低烘乾溫度為 " +#, c-format, boost-format +msgid "%s minimum drying temperature is %d°C." +msgstr "%s 的最低烘乾溫度為 %d°C。" # AI Translated msgid "This filament may not be completely dried." @@ -21638,6 +21836,98 @@ msgstr "" "避免翹曲\n" "您知道嗎？當列印容易翹曲的材料（如 ABS）時，適當提高熱床溫度可以降低翹曲的機率。" +#~ msgid "Other" +#~ msgstr "其他" + +# AI Translated +#~ msgid "Left: " +#~ msgstr "左： " + +# AI Translated +#~ msgid "Right: " +#~ msgstr "右： " + +#~ msgid "The maximum temperature cannot exceed " +#~ msgstr "最高溫度不能超過 " + +#~ msgid "The minmum temperature should not be less than " +#~ msgstr "最低溫度不應低於 " + +#~ msgid "up to" +#~ msgstr "達到" + +#~ msgid "above" +#~ msgstr "高於" + +#~ msgid "from" +#~ msgstr "從" + +#~ msgid "Configuration package: " +#~ msgstr "設定檔：" + +#~ msgid " updated to " +#~ msgstr "更新到 " + +#~ msgid "Grouping error: " +#~ msgstr "分組錯誤：" + +#~ msgid " can not be placed in the " +#~ msgstr "無法放置於" + +# AI Translated +#~ msgid " maximum drying temperature is " +#~ msgstr " 最高烘乾溫度為 " + +# AI Translated +#~ msgid " minimum drying temperature is " +#~ msgstr " 最低烘乾溫度為 " + +# AI Translated +#~ msgid "needs" +#~ msgstr "需要" + +# AI Translated +#~ msgid "not enabled" +#~ msgstr "未啟用" + +# AI Translated +#~ msgid "material not published" +#~ msgstr "材料未發布" + +#~ msgid "Select the language" +#~ msgstr "選擇語言" + +# AI Translated +#~ msgid "Select plugin" +#~ msgstr "選擇外掛" + +# AI Translated +#~ msgid "" +#~ "Direction in which top surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，頂面填充的方向。\n" +#~ "「向外」從表面中心開始，因此多餘的材料會被推向最不明顯的邊緣。「向內」從邊緣開始，並以中心的緊密曲線結束。\n" +#~ "預設使用最短路徑排序，方向可能為任一種。" + +# AI Translated +#~ msgid "" +#~ "Direction in which bottom surfaces are filled when using a center-based pattern (Concentric, Archimedean Chords, Octagram Spiral).\n" +#~ "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" +#~ "Default uses shortest-path ordering, which may run in either direction." +#~ msgstr "" +#~ "使用以中心為基礎的圖樣（同心、阿基米德弦線、八角星螺旋）時，底面填充的方向。\n" +#~ "「向內」讓每個表面從較寬的外側曲線開始，可改善中心緊密曲線可能無法附著的列印板上的第一層附著。「向外」從中心開始，將多餘的材料推向邊緣。\n" +#~ "預設使用最短路徑排序，方向可能為任一種。" + +#~ msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower. User is responsible for ensuring there is no collision with the print." +#~ msgstr "啟用此選項後，換料塔將不會在沒有工具更換的層中列印。在有工具更換的層中，擠出機將向下移動以列印換料塔。請使用者自行確保清洗塔與列印物之間不會發生碰撞。" + +# AI Translated +#~ msgid "This exports settings to a file." +#~ msgstr "將設定匯出至檔案。" + #~ msgid "Native Wayland liveview requires the GStreamer GTK video sink. Please install the gtksink plugin for GStreamer, then restart OrcaSlicer." #~ msgstr "原生 Wayland 即時檢視需要 GStreamer GTK 視訊接收器。請為 GStreamer 安裝 gtksink 外掛程式，然後重新啟動 OrcaSlicer。" diff --git a/src/libslic3r/GCode/ToolOrdering.cpp b/src/libslic3r/GCode/ToolOrdering.cpp index 64ea4d52b3..7ea46cf8a7 100644 --- a/src/libslic3r/GCode/ToolOrdering.cpp +++ b/src/libslic3r/GCode/ToolOrdering.cpp @@ -10,6 +10,7 @@ #include "FilamentMixer.hpp" #include "LocalesUtils.hpp" #include "Utils.hpp" +#include "format.hpp" #include "I18N.hpp" #include @@ -82,8 +83,9 @@ bool check_filament_printable_after_group(const std::vector &used_ int printable_status = print_config->filament_printable.get_at(filament_id); int extruder_idx = filament_maps[filament_id]; if (!(printable_status >> extruder_idx & 1)) { - std::string extruder_name = extruder_idx == 0 ? _L("left") : _L("right"); - std::string error_msg = _L("Grouping error: ") + filament_type + _L(" can not be placed in the ") + extruder_name + _L(" nozzle"); + std::string error_msg = extruder_idx == 0 ? + Slic3r::format(_L("Grouping error: %1% cannot be placed in the left nozzle"), filament_type) : + Slic3r::format(_L("Grouping error: %1% cannot be placed in the right nozzle"), filament_type); throw Slic3r::RuntimeError(error_msg); } } diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index ea39cbeb5b..02d1b50198 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -6302,6 +6302,7 @@ void PrintConfigDef::init_fff_params() def = this->add("wipe_inward_distance", coFloatOrPercent); def->label = L("Wipe inward distance"); def->category = L("Quality"); + // xgettext:no-c-format, no-boost-format def->tooltip = L("The distance the wipe path is shifted away from the external perimeter, specified in millimeters " "or as a percentage of the actual outer-wall extrusion width.\n\n" "For example, 50% shifts the path by half of the outer-wall width. The effective offset is limited " @@ -6762,7 +6763,7 @@ void PrintConfigDef::init_fff_params() def = this->add("slicing_mode", coEnum); def->label = L("Slicing Mode"); - def->category = L("Other"); + def->category = L("Others"); def->tooltip = L("Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."); def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); def->enum_values.push_back("regular"); diff --git a/src/slic3r/GUI/AMSDryControl.cpp b/src/slic3r/GUI/AMSDryControl.cpp index eb5ddb5d4e..17d7d62ad8 100644 --- a/src/slic3r/GUI/AMSDryControl.cpp +++ b/src/slic3r/GUI/AMSDryControl.cpp @@ -1197,11 +1197,11 @@ void AMSDryCtrWin::update_normal_description(DevAms* dev_ams) for (const auto& lim : ams_limits) { if (dev_ams->GetAmsType() == lim.type) { if (temp_val > lim.max_temp) { - wxString msg = wxString(lim.name) + _L(" maximum drying temperature is ") + wxString::Format(wxT("%d"), lim.max_temp) + wxString::FromUTF8("°C."); + wxString msg = wxString::Format(_L("%s maximum drying temperature is %d°C."), wxString(lim.name), lim.max_temp); warning_text += msg + "\n"; can_enable_button = false; } else if (temp_val < lim.min_temp) { - wxString msg = wxString(lim.name) + _L(" minimum drying temperature is ") + wxString::Format(wxT("%d"), lim.min_temp) + wxString::FromUTF8("°C."); + wxString msg = wxString::Format(_L("%s minimum drying temperature is %d°C."), wxString(lim.name), lim.min_temp); warning_text += msg + "\n"; can_enable_button = false; } diff --git a/src/slic3r/GUI/ColorDecomposeSupport.cpp b/src/slic3r/GUI/ColorDecomposeSupport.cpp index ea67564208..cfd0d02532 100644 --- a/src/slic3r/GUI/ColorDecomposeSupport.cpp +++ b/src/slic3r/GUI/ColorDecomposeSupport.cpp @@ -395,8 +395,9 @@ bool confirm_create_decompose_missing_components(wxWindow* parent, const std::ve missing_text += missing[i].display_name; } - wxString message = _L("The current filament list does not contain ") + missing_text + - _L(". A project filament required by the mixed filament will be created automatically after decomposition."); + wxString message = wxString::Format(_L("The current filament list does not contain %s. A project filament required by " + "the mixed filament will be created automatically after decomposition."), + missing_text); MessageDialog dlg(parent, message, _L("Tip"), wxOK | wxCANCEL | wxICON_INFORMATION); dlg.show_dsa_button(); diff --git a/src/slic3r/GUI/GCodeViewer.cpp b/src/slic3r/GUI/GCodeViewer.cpp index 49477ac7dd..c40d6dd222 100644 --- a/src/slic3r/GUI/GCodeViewer.cpp +++ b/src/slic3r/GUI/GCodeViewer.cpp @@ -17,6 +17,7 @@ #include "Plater.hpp" #include "Camera.hpp" #include "I18N.hpp" +#include "format.hpp" #include "GUI_Utils.hpp" #include "GUI.hpp" #include "GLCanvas3D.hpp" @@ -3436,16 +3437,18 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv return ret; }; + // Whole sentences: the bare "up to"/"above"/"from"/"to" these used to be glued from gave a + // translator no context, and left the unit and the numbers stuck in English word order. auto upto_label = [](double z) { char buf[64]; ::sprintf(buf, "%.2f", z); - return _u8L("up to") + " " + std::string(buf) + " " + _u8L("mm"); + return format(_u8L("up to %1% mm"), buf); }; auto above_label = [](double z) { char buf[64]; ::sprintf(buf, "%.2f", z); - return _u8L("above") + " " + std::string(buf) + " " + _u8L("mm"); + return format(_u8L("above %1% mm"), buf); }; auto fromto_label = [](double z1, double z2) { @@ -3453,7 +3456,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv ::sprintf(buf1, "%.2f", z1); char buf2[64]; ::sprintf(buf2, "%.2f", z2); - return _u8L("from") + " " + std::string(buf1) + " " + _u8L("to") + " " + std::string(buf2) + " " + _u8L("mm"); + return format(_u8L("from %1% to %2% mm"), buf1, buf2); }; auto role_time_and_percent = [this, total_estimated_time](libvgcode::EGCodeExtrusionRole role) { diff --git a/src/slic3r/GUI/PublishSettingsDialog.cpp b/src/slic3r/GUI/PublishSettingsDialog.cpp index 82de9fca68..57818dca82 100644 --- a/src/slic3r/GUI/PublishSettingsDialog.cpp +++ b/src/slic3r/GUI/PublishSettingsDialog.cpp @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -416,12 +417,54 @@ std::set project_used_filament_slots(const PresetBundle& bundle, const D return used; } +// Lays a translated sentence out along `row`, replacing each "%1%"-style placeholder with the +// matching window from `chips`. Keeping the sentence in one msgid lets a translation put the +// placeholders wherever its own grammar needs them; spacing comes from the translation itself. +void add_sentence_with_chips(wxWindow* parent, wxSizer* row, const wxString& sentence, const std::vector& chips) +{ + std::vector placed(chips.size(), false); + auto add_text = [&](wxString text) { + text.Replace("%%", "%"); // the sentence is a format string + if (text.IsEmpty()) + return; + auto* label = new wxStaticText(parent, wxID_ANY, text); + label->SetFont(Label::Body_12); + label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#6B6B6B"))); + row->Add(label, 0, wxALIGN_CENTER_VERTICAL); + }; + auto add_chip = [&](size_t i) { + if (i < chips.size() && chips[i] != nullptr && !placed[i]) { + placed[i] = true; + row->Add(chips[i], 0, wxALIGN_CENTER_VERTICAL); + } + }; + + size_t literal = 0, pos = 0; + while ((pos = sentence.find('%', pos)) != wxString::npos) { + size_t end = pos + 1; + while (end < sentence.length() && sentence[end] >= '0' && sentence[end] <= '9') + ++end; + if (end == pos + 1 || end >= sentence.length() || sentence[end] != '%') { + ++pos; // a bare '%' + continue; + } + long index = 0; + sentence.Mid(pos + 1, end - pos - 1).ToLong(&index); + add_text(sentence.Mid(literal, pos - literal)); + add_chip(size_t(index - 1)); + literal = pos = end + 1; + } + add_text(sentence.Mid(literal)); + for (size_t i = 0; i < chips.size(); ++i) // whatever the translation left out + add_chip(i); +} + } // namespace // Warning shown on OK when an enabled mixed-filament slot relies on a filament that would ship -// without its material. One row per unmet dependency: the mixed slot's colour chip, the -// component filament's colour chip, and the reason. "Cancel" is the safe choice and keeps the -// dialog open; "Publish anyway" continues. +// without its material. One row per unmet dependency, each a single translated sentence whose +// two placeholders are the mixed slot's and the component filament's colour chips. "Cancel" is +// the safe choice and keeps the dialog open; "Publish anyway" continues. class MixedFilamentWarningDialog : public MsgDialog { public: @@ -437,47 +480,37 @@ public: content->AddSpacer(FromDIP(10)); const int swatch = FromDIP(20); - for (const MixedDependencyIssue& issue : issues) { - auto* row = new wxBoxSizer(wxHORIZONTAL); - - // The mixed slot as just its own chip (gradient-aware, numbered like its tab); - // falls back to a plain label when the chip cannot be built. - const wxString mix_label = wxString::Format(_L("Filament %d (mixed)"), int(issue.mixed_slot) + 1); - const wxBitmap mix_bmp = mixed_filament_chip_bitmap(full, issue.mixed_slot, swatch); - if (mix_bmp.IsOk()) { - auto* bmp = new wxStaticBitmap(this, wxID_ANY, mix_bmp); - bmp->SetToolTip(mix_label); - row->Add(bmp, 0, wxALIGN_CENTER_VERTICAL); - } else { - auto* label = new wxStaticText(this, wxID_ANY, mix_label); - label->SetFont(Label::Body_12); - row->Add(label, 0, wxALIGN_CENTER_VERTICAL); + // The slot's colour swatch, numbered like its tab, with the slot name on hover; falls + // back to a label so the sentence always names both filaments. + auto make_chip = [&](const wxBitmap& bmp, const wxString& name) -> wxWindow* { + if (bmp.IsOk()) { + auto* chip = new wxStaticBitmap(this, wxID_ANY, bmp); + chip->SetToolTip(name); + return chip; } + auto* label = new wxStaticText(this, wxID_ANY, name); + label->SetFont(Label::Body_12); + return label; + }; - auto* needs = new wxStaticText(this, wxID_ANY, _L("needs")); - needs->SetFont(Label::Body_12); - needs->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#6B6B6B"))); - row->Add(needs, 0, wxALIGN_CENTER_VERTICAL | wxLEFT | wxRIGHT, FromDIP(6)); - - // The component filament's colour chip, numbered like the tab strips; the slot - // name stays on hover to keep the row itself short. + for (const MixedDependencyIssue& issue : issues) { std::string hex = filament_color_hex(full, issue.component_slot); if (hex.empty()) hex = "#D9D9D9"; - if (wxBitmap* chip = get_extruder_color_icon(hex, std::to_string(issue.component_slot + 1), swatch, swatch)) { - auto* comp_bmp = new wxStaticBitmap(this, wxID_ANY, *chip); - comp_bmp->SetToolTip(wxString::Format(_L("Filament %d"), int(issue.component_slot) + 1)); - row->Add(comp_bmp, 0, wxALIGN_CENTER_VERTICAL); - } + const wxBitmap* comp_bmp = get_extruder_color_icon(hex, std::to_string(issue.component_slot + 1), swatch, swatch); - auto* reason = new wxStaticText(this, wxID_ANY, - issue.reason == MixedDependencyIssue::Reason::Disabled ? _L("not enabled") : - _L("material not published")); - reason->SetFont(Label::Body_12); - reason->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#989898"))); - row->Add(reason, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(8)); + wxWindow* mix_chip = make_chip(mixed_filament_chip_bitmap(full, issue.mixed_slot, swatch), + wxString::Format(_L("Filament %d (mixed)"), int(issue.mixed_slot) + 1)); + wxWindow* comp_chip = make_chip(comp_bmp != nullptr ? *comp_bmp : wxNullBitmap, + wxString::Format(_L("Filament %d"), int(issue.component_slot) + 1)); - content->Add(row, 0, wxLEFT, FromDIP(10)); + auto* row = new wxWrapSizer(wxHORIZONTAL); + add_sentence_with_chips(this, row, + issue.reason == MixedDependencyIssue::Reason::Disabled ? + _L("%1% needs %2%, which is not enabled.") : + _L("%1% needs %2%, whose material will not be published."), + {mix_chip, comp_chip}); + content->Add(row, 0, wxEXPAND | wxLEFT, FromDIP(10)); content->AddSpacer(FromDIP(6)); } diff --git a/src/slic3r/GUI/UnsavedChangesDialog.cpp b/src/slic3r/GUI/UnsavedChangesDialog.cpp index acf50e6641..39e611b341 100644 --- a/src/slic3r/GUI/UnsavedChangesDialog.cpp +++ b/src/slic3r/GUI/UnsavedChangesDialog.cpp @@ -1497,7 +1497,7 @@ void UnsavedChangesDialog::update_tree(Preset::Type type, DynamicConfig * config const std::string label = def ? (def->full_label.empty() ? def->label : def->full_label) : std::string(); option.label_local = (label.empty() ? from_u8(opt_key) : _L(label)).ToStdWstring(); option.category_local = (def && !def->category.empty() ? - Tab::translate_category(from_u8(def->category), type) : _L("Other")).ToStdWstring(); + Tab::translate_category(from_u8(def->category), type) : _L("Others")).ToStdWstring(); } auto category = option.category_local; auto opt = dynamic_cast(config->option(opt_key)); diff --git a/src/slic3r/GUI/Widgets/TempInput.cpp b/src/slic3r/GUI/Widgets/TempInput.cpp index 6705378dac..79899940d1 100644 --- a/src/slic3r/GUI/Widgets/TempInput.cpp +++ b/src/slic3r/GUI/Widgets/TempInput.cpp @@ -275,9 +275,9 @@ void TempInput::Warning(bool warn, WarningType type) wxString warning_string; if (type == WarningType::WARNING_TOO_HIGH) - warning_string = _L("The maximum temperature cannot exceed ") + wxString::Format("%d", max_temp); + warning_string = wxString::Format(_L("The maximum temperature cannot exceed %d"), max_temp); else if (type == WarningType::WARNING_TOO_LOW) - warning_string = _L("The minmum temperature should not be less than ") + wxString::Format("%d", min_temp); + warning_string = wxString::Format(_L("The minimum temperature should not be less than %d"), min_temp); warning_text->SetLabel(warning_string); warning_text->Wrap(-1); warning_text->Fit(); diff --git a/src/slic3r/Utils/PresetUpdater.cpp b/src/slic3r/Utils/PresetUpdater.cpp index 69bfa4217e..5fd5898a1b 100644 --- a/src/slic3r/Utils/PresetUpdater.cpp +++ b/src/slic3r/Utils/PresetUpdater.cpp @@ -1711,7 +1711,7 @@ void PresetUpdater::priv::check_new_vendors(const std::set& system_ GUI::wxGetApp().plater()->get_notification_manager()->push_notification( GUI::NotificationType::PresetUpdateFinished, GUI::NotificationManager::NotificationLevel::ImportantNotificationLevel, - _u8L("Configuration package: ") + vendor_id + _u8L(" updated to ") + cur_ver.to_string()); + Slic3r::format(_u8L("Configuration package: %1% updated to %2%"), vendor_id, cur_ver.to_string())); } }); } @@ -1806,7 +1806,7 @@ PresetUpdater::UpdateResult PresetUpdater::config_update(const Semver& old_slic3 ->get_notification_manager() ->push_notification(GUI::NotificationType::PresetUpdateFinished, GUI::NotificationManager::NotificationLevel::ImportantNotificationLevel, - _u8L("Configuration package: ") + b + _u8L(" updated to ") + cur_ver.to_string()); + Slic3r::format(_u8L("Configuration package: %1% updated to %2%"), b, cur_ver.to_string())); } return R_UPDATE_INSTALLED; } From 52f4c68c41328dd32321e164600253cac6f9293e Mon Sep 17 00:00:00 2001 From: Valerii Bokhan <80919135+valerii-bokhan@users.noreply.github.com> Date: Thu, 17 Sep 2026 22:50:30 +0200 Subject: [PATCH 8/8] addnorth filament profiles: H2C and A2L support (#14764) --- resources/profiles/BBL.json | 2 +- .../BBL/filament/addnorth/addnorth ABS rABS.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PA Adura FDA.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PA Adura.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PA-CF Adura X.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PA6 Addlantis.json | 10 +++++++++- .../filament/addnorth/addnorth PC BLend HT LCF.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PETG Base.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PETG ESD.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PETG Economy.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PETG Flame v0.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PETG PRO Matte.json | 10 +++++++++- .../filament/addnorth/addnorth PETG rPETG Matte.json | 10 +++++++++- .../filament/addnorth/addnorth PETG-CF Rigid X.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PLA E-PLA.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PLA Economy.json | 10 +++++++++- .../addnorth/addnorth PLA HT-PLA PRO Matte.json | 10 +++++++++- .../filament/addnorth/addnorth PLA Premium Silk.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PLA Textura.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PLA Wood.json | 10 +++++++++- .../addnorth/addnorth PLA X-PLA High Speed.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth PLA X-PLA.json | 10 +++++++++- .../filament/addnorth/addnorth PLA rPLA RE-ADD.json | 10 +++++++++- .../addnorth/addnorth PLA-CF Carbon Fiber.json | 10 +++++++++- .../filament/addnorth/addnorth PVDF Adamant S1.json | 10 +++++++++- .../BBL/filament/addnorth/addnorth TPU EasyFlex.json | 10 +++++++++- .../filament/addnorth/addnorth TPU Pro Matte 85A.json | 10 +++++++++- .../filament/addnorth/addnorth TPU Pro Matte 95A.json | 10 +++++++++- 28 files changed, 244 insertions(+), 28 deletions(-) diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 3f655ddd22..7491f4064d 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,7 +1,7 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "02.01.00.27", + "version": "02.01.00.28", "force_update": "0", "description": "BBL configurations", "machine_model_list": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json b/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json index cb237f18d4..5d6b376e47 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json index b97552d7be..703389a687 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json index a9af61a692..beba3c51de 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json b/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json index 2c0ba3a07d..f4894e3e6a 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json b/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json index 70c9d23c7e..5cb61738c8 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json b/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json index cf406059c4..b94065e44d 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json index 0bc31baa96..eb1ffaf48c 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json index af7b7a58ce..de07353b97 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json index 1a2f3fc199..f3df226774 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json index d39f99b6a1..08ad97161a 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json index b4bf97f5ef..0948d9f9c7 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json index b93d234c7d..0396c6578d 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json b/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json index a67766a158..a0f78bb956 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json index 230487e7b9..3a35d16b29 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json index d127ef80bb..77a86797f0 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json index 1a4b6ce91b..5327b8a083 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json index d149f1cccd..1487f567cd 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json index 50d8e0f6ca..789d2bd096 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json index 219c0d4384..aed77a1a1a 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json index 5e4796c0e4..6e0a0952d5 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json index 9d852517a2..d785327ee7 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json index 8cd0d62151..c530f3fa7c 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json b/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json index 3c542ea4d7..32debd4c18 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json b/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json index 0213bc0680..88258976f2 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json index 0fd00bee84..afdcb43296 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json index d04dd869fd..81d08c4681 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [], diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json index e3460d0353..0b4e7c3fcd 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json +++ b/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json @@ -58,7 +58,15 @@ "Bambu Lab X2D 0.2 nozzle", "Bambu Lab X2D 0.4 nozzle", "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.2 nozzle", + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" ], "compatible_printers_condition": "", "compatible_prints": [],