Merge branch 'feature/update-toolchanger-profiles' into feature/wipetower2_travel_path

resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json

@@ -1,5 +1,8 @@
 {
 	"type": "filament",
+	"name": "Polymaker General PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
 	"setting_id": "thXfSaUkOAKJ50ey",
 	"instantiation": "true",
 	"compatible_printers": [
@@ -14,9 +17,6 @@
 	"filament_vendor": [
 		"Polymaker"
 	],
-	"from": "system",
-	"inherits": "Polymaker PLA @U1 base",
-	"name": "Polymaker General PLA Family @U1",
 	"nozzle_temperature_range_high": [
 		"230"
 	],

resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json

@@ -3,6 +3,7 @@
 	"name": "Polymaker PLA @U1 base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"filament_id": "OGFL99",
 	"instantiation": "false",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
@@ -102,6 +103,5 @@
 	],
 	"filament_end_gcode": [
 		"; filament end gcode\n"
-	],
+	]
-	"filament_id": "OGFL99"
 }

resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json

@@ -1,5 +1,8 @@
 {
 	"type": "filament",
+	"name": "Polymaker Silk PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
 	"setting_id": "h8vIYpXbxFtHPV6e",
 	"instantiation": "true",
 	"compatible_printers": [
@@ -11,9 +14,6 @@
 	"filament_vendor": [
 		"Polymaker"
 	],
-	"from": "system",
-	"inherits": "Polymaker PLA @U1 base",
-	"name": "Polymaker Silk PLA Family @U1",
 	"nozzle_temperature": [
 		"230"
 	],

resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json

@@ -1,5 +1,8 @@
 {
 	"type": "filament",
+	"name": "Polymaker Tough PLA Family @U1",
+	"inherits": "Polymaker PLA @U1 base",
+	"from": "system",
 	"setting_id": "d6CC81Es2hp46bto",
 	"instantiation": "true",
 	"compatible_printers": [
@@ -14,9 +17,6 @@
 	"filament_vendor": [
 		"Polymaker"
 	],
-	"from": "system",
-	"inherits": "Polymaker PLA @U1 base",
-	"name": "Polymaker Tough PLA Family @U1",
 	"slow_down_layer_time": [
 		"6"
 	],

resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json

@@ -11,7 +11,6 @@
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]

resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json

@@ -17,7 +17,6 @@
 	"filament_z_hop": [
 		"0.0"
 	],
-
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json

@@ -17,7 +17,6 @@
 	"filament_z_hop": [
 		"0.0"
 	],
-
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json

@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.04"
 	]

resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite Dual PLA @0.2 nozzle",
-	"setting_id": "jhmy4YHi9MuL0DWu",
 	"inherits": "PolyLite PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "jhmy4YHi9MuL0DWu",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 Dual (0.2 nozzle)",
 		"Snapmaker A250 Dual BKit (0.2 nozzle)",

resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite J1 PLA @0.2 nozzle",
-	"setting_id": "jFlRSxx0KvN3BOUu",
 	"inherits": "PolyLite PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "jFlRSxx0KvN3BOUu",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.2 nozzle)"
 	]

resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite J1 PLA",
-	"setting_id": "wcpOTTMyZNPFKyXr",
 	"inherits": "PolyLite PLA @base",
+	"from": "system",
+	"setting_id": "wcpOTTMyZNPFKyXr",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.4 nozzle)",
 		"Snapmaker J1 (0.6 nozzle)",

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json

@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "PolyLite PETG @Base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.25"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_petg",
-	"name": "PolyLite PETG @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json

@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json

@@ -17,7 +17,6 @@
 	"supertack_plate_temp_initial_layer": [
 		"70"
 	],
-
 	"pressure_advance": [
 		"0.05"
 	]

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyLite PLA @0.2 nozzle",
-	"setting_id": "s9mdMaFca8SHfji9",
 	"inherits": "PolyLite PLA @base",
+	"from": "system",
+	"setting_id": "s9mdMaFca8SHfji9",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 (0.2 nozzle)",
 		"Snapmaker A250 BKit (0.2 nozzle)",

resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "PolyLite PLA @base",
-	"filament_id": "1393866034",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "1393866034",
+	"instantiation": "false",
 	"filament_flow_ratio": [
 		"0.95"
 	],

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra Dual PLA @0.2 nozzle",
-	"setting_id": "UQYgjH1uVxf3d2Nv",
 	"inherits": "PolyTerra PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "UQYgjH1uVxf3d2Nv",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 Dual (0.2 nozzle)",
 		"Snapmaker A250 Dual BKit (0.2 nozzle)",

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra J1 PLA @0.2 nozzle",
-	"setting_id": "mxKHxGmBZzPLS82O",
 	"inherits": "PolyTerra PLA @0.2 nozzle",
+	"from": "system",
+	"setting_id": "mxKHxGmBZzPLS82O",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.2 nozzle)"
 	]

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra J1 PLA",
-	"setting_id": "4MZWZX7QPBzxdEGj",
 	"inherits": "PolyTerra PLA @base",
+	"from": "system",
+	"setting_id": "4MZWZX7QPBzxdEGj",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker J1 (0.4 nozzle)",
 		"Snapmaker J1 (0.6 nozzle)",

resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "true",
 	"name": "PolyTerra PLA @0.2 nozzle",
-	"setting_id": "6W1ygT08NordBdIW",
 	"inherits": "PolyTerra PLA @base",
+	"from": "system",
+	"setting_id": "6W1ygT08NordBdIW",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker A250 (0.2 nozzle)",
 		"Snapmaker A250 BKit (0.2 nozzle)",

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json

@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker HT-PLA @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.28"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker HT-PLA @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]

resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json

@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker HT-PLA-GF @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.34"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker HT-PLA-GF @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]

resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json

@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker PETG @Base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.3"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_petg",
-	"name": "Polymaker PETG @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]

resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json

@@ -1,4 +1,9 @@
 {
+	"type": "filament",
+	"name": "Polymaker PLA Pro @Base",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"instantiation": "false",
 	"filament_density": [
 		"1.23"
 	],
@@ -18,11 +23,6 @@
 		"0"
 	],
 	"description": "",
-	"inherits": "fdm_filament_pla",
-	"name": "Polymaker PLA Pro @Base",
-	"type": "filament",
-	"instantiation": "false",
-	"from": "system",
 	"filament_vendor": [
 		"Polymaker"
 	]

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "mJoaud6wulT4p8SA",
 	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle",
-	"inherits": "Snapmaker Breakaway Support @base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "rKUUREJNhstIU0I2",
 	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle",
-	"inherits": "Snapmaker Breakaway Support @base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
+	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "hQ8jQ5GKQKGKuPew",
 	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle",
-	"inherits": "Snapmaker Breakaway Support @base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker Breakaway Support For PLA @U1",
+	"inherits": "Snapmaker Breakaway Support @base",
 	"from": "system",
 	"setting_id": "5DqT3CYUgp1oJD1V",
 	"instantiation": "true",
-	"name": "Snapmaker Breakaway Support For PLA @U1",
-	"inherits": "Snapmaker Breakaway Support @base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "UTpedqYJysaoe3OI",
 	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.2 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "k6UQJJASzFSfePqN",
 	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.4 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "FlcbnP3kWiJLMDMl",
 	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.6 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
+	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"from": "system",
 	"setting_id": "aJk3TnFTU3uQGjd3",
 	"instantiation": "true",
-	"name": "Snapmaker PETG Translucent @U1 0.8 nozzle",
-	"inherits": "Snapmaker PETG Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json

@@ -1,8 +1,8 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PETG Translucent @U1 base",
+	"inherits": "fdm_filament_petg",
+	"from": "system",
 	"filament_id": "PETG_TRANSLUCENT_001",
-	"inherits": "fdm_filament_petg"
+	"instantiation": "false"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA @U1 base",
-	"filament_id": "14170311270",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "14170311270",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Basic @U1 base",
+	"from": "system",
 	"filament_id": "1417031127011",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Basic @U1",
+	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "ZtUJN4JpkR0MLpiY",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Basic @U1",
-	"inherits": "Snapmaker PLA Basic @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Eco @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Eco @U1 base",
-	"filament_id": "2008037900",
 	"inherits": "fdm_filament_pla_eco",
+	"from": "system",
+	"filament_id": "2008037900",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
+	"inherits": "Snapmaker PLA Basic @U1 base",
 	"from": "system",
 	"setting_id": "iybaFWrXKOsmXgMJ",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle",
-	"inherits": "Snapmaker PLA Basic @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
+	"inherits": "Snapmaker PLA Glow @U1 base",
 	"from": "system",
 	"setting_id": "ee1YNNr8CwKetuvY",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Glow @U1 0.4 nozzle",
-	"inherits": "Snapmaker PLA Glow @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Glow @U1 base",
-	"filament_id": "SPGLOW001",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "SPGLOW001",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"from": "system",
 	"setting_id": "d3c48DeNk7VDeeHf",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 0.2 nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"from": "system",
 	"setting_id": "l3E1WaljDn2uoTqW",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 0.6 nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
+	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"from": "system",
 	"setting_id": "NLPd4AA0seW3NXdy",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1 0.8 nozzle",
-	"inherits": "Snapmaker PLA Matte @U1 base2",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Matte @U1 base",
+	"from": "system",
 	"filament_id": "141703112701",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Matte @U1 base2",
+	"from": "system",
 	"filament_id": "141703112701",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Matte @U1",
+	"inherits": "Snapmaker PLA @U1 base",
 	"from": "system",
 	"setting_id": "uAhykL5ap1DAKacf",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Matte @U1",
-	"inherits": "Snapmaker PLA @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Metal @U1 base",
-	"filament_id": "20299943460",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "20299943460",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json

@@ -1,10 +1,11 @@
 {
 	"type": "filament",
-	"from": "system",
-	"setting_id": "Q5xH6oGGlbXr14Pa",
-	"instantiation": "true",
 	"name": "Snapmaker PLA Silk @U1 0.2 nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
+	"from": "system",
+	"setting_id": "Q5xH6oGGlbXr14Pa",
+	"filament_id": "11813638720",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],
@@ -280,6 +281,5 @@
 	],
 	"pressure_advance": [
 		"0.015"
-	],
+	]
-	"filament_id": "11813638720"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json

@@ -1,10 +1,11 @@
 {
 	"type": "filament",
-	"from": "system",
-	"setting_id": "2pieDQoz9PiDCnU1",
-	"instantiation": "true",
 	"name": "Snapmaker PLA Silk @U1 0.6 nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
+	"from": "system",
+	"setting_id": "2pieDQoz9PiDCnU1",
+	"filament_id": "11813638720",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],
@@ -280,6 +281,5 @@
 	],
 	"pressure_advance": [
 		"0.015"
-	],
+	]
-	"filament_id": "11813638720"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json

@@ -1,10 +1,11 @@
 {
 	"type": "filament",
-	"from": "system",
-	"setting_id": "f3H0JFUnds0mkKCN",
-	"instantiation": "true",
 	"name": "Snapmaker PLA Silk @U1 0.8 nozzle",
 	"inherits": "Snapmaker PLA Basic @U1 base",
+	"from": "system",
+	"setting_id": "f3H0JFUnds0mkKCN",
+	"filament_id": "11813638720",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],
@@ -280,6 +281,5 @@
 	],
 	"pressure_advance": [
 		"0.015"
-	],
+	]
-	"filament_id": "11813638720"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Silk @U1 base",
-	"filament_id": "11813638720",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "11813638720",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json

@@ -1,10 +1,11 @@
 {
 	"type": "filament",
-	"from": "system",
-	"setting_id": "9PkHSwtXFM0zPWth",
-	"instantiation": "true",
 	"name": "Snapmaker PLA Silk @U1",
 	"inherits": "Snapmaker PLA Basic @U1 base",
+	"from": "system",
+	"setting_id": "9PkHSwtXFM0zPWth",
+	"filament_id": "11813638720",
+	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],
@@ -280,6 +281,5 @@
 	],
 	"pressure_advance": [
 		"0.015"
-	],
+	]
-	"filament_id": "11813638720"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"from": "system",
 	"setting_id": "jsAgNNiUC6DoO7rz",
 	"instantiation": "true",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"filament_deretraction_speed": [
 		"30"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"from": "system",
 	"setting_id": "aKudBpQBj3MZZZav",
 	"instantiation": "true",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"from": "system",
 	"setting_id": "sWoInox4hzxzIHfe",
 	"instantiation": "true",
-	"name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 base2",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA SnapSpeed @U1 base",
+	"from": "system",
 	"filament_id": "141703112701",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA SnapSpeed @U1 base2",
+	"from": "system",
 	"filament_id": "141703112701",
+	"instantiation": "false",
 	"activate_air_filtration": [
 		"0"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA SnapSpeed @U1",
+	"inherits": "Snapmaker PLA SnapSpeed @U1 base",
 	"from": "system",
 	"setting_id": "en6Pvvbc1P9TKm8I",
 	"instantiation": "true",
-	"name": "Snapmaker PLA SnapSpeed @U1",
-	"inherits": "Snapmaker PLA SnapSpeed @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "zIg9XLrieYNBduyn",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Translucent @U1 0.2 nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.2 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "RqtrcLcy124ICGEc",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Translucent @U1 0.4 nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "OZHemzEcvzFMN8fL",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Translucent @U1 0.6 nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
+	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"from": "system",
 	"setting_id": "IPehCg9fKawLorB5",
 	"instantiation": "true",
-	"name": "Snapmaker PLA Translucent @U1 0.8 nozzle",
-	"inherits": "Snapmaker PLA Translucent @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA Translucent @U1 base",
-	"filament_id": "SPTR001",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "SPTR001",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json

@@ -3,6 +3,8 @@
 	"name": "Snapmaker PLA Wood @U1 0.4 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"setting_id": "XvizDDHbds3bVrzi",
+	"filament_id": "GFL9922",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
@@ -102,7 +104,5 @@
 	],
 	"temperature_vitrification": [
 		"45"
-	],
+	]
-	"setting_id": "XvizDDHbds3bVrzi",
-	"filament_id": "GFL9922"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json

@@ -3,6 +3,8 @@
 	"name": "Snapmaker PLA Wood @U1 0.6 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"setting_id": "Kp77DCcitdmoyjqm",
+	"filament_id": "GFL9922",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
@@ -108,7 +110,5 @@
 	],
 	"temperature_vitrification": [
 		"45"
-	],
+	]
-	"setting_id": "Kp77DCcitdmoyjqm",
-	"filament_id": "GFL9922"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json

@@ -3,6 +3,8 @@
 	"name": "Snapmaker PLA Wood @U1 0.8 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"setting_id": "nBYnNiqwLo6nAsqi",
+	"filament_id": "GFL9922",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
@@ -108,7 +110,5 @@
 	],
 	"temperature_vitrification": [
 		"45"
-	],
+	]
-	"setting_id": "nBYnNiqwLo6nAsqi",
-	"filament_id": "GFL9922"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json

@@ -3,6 +3,8 @@
 	"name": "Snapmaker PLA-CF @U1 0.4 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"setting_id": "2INwruC3ZVkBTdUT",
+	"filament_id": "GFL98111",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
@@ -126,7 +128,5 @@
 	],
 	"additional_cooling_fan_speed": [
 		"0"
-	],
+	]
-	"setting_id": "2INwruC3ZVkBTdUT",
-	"filament_id": "GFL98111"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json

@@ -3,6 +3,8 @@
 	"name": "Snapmaker PLA-CF @U1 0.6 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"setting_id": "CKfdL85SvbOLzMuP",
+	"filament_id": "GFL98111",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
@@ -132,7 +134,5 @@
 	],
 	"additional_cooling_fan_speed": [
 		"0"
-	],
+	]
-	"setting_id": "CKfdL85SvbOLzMuP",
-	"filament_id": "GFL98111"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json

@@ -3,6 +3,8 @@
 	"name": "Snapmaker PLA-CF @U1 0.8 nozzle",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
+	"setting_id": "fhhnfJm4dN9FXpWQ",
+	"filament_id": "GFL98111",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
@@ -129,7 +131,5 @@
 	],
 	"additional_cooling_fan_speed": [
 		"0"
-	],
+	]
-	"setting_id": "fhhnfJm4dN9FXpWQ",
-	"filament_id": "GFL98111"
 }

resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PLA-CF @U1 base",
-	"filament_id": "17021473250",
 	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"filament_id": "17021473250",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.6 nozzle",
+	"inherits": "Snapmaker PVA @U1 base",
 	"from": "system",
 	"setting_id": "lIqgnfeZdAm8G0TH",
 	"instantiation": "true",
-	"name": "Snapmaker PVA @U1 0.6 nozzle",
-	"inherits": "Snapmaker PVA @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.6 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PVA @U1 0.8 nozzle",
+	"inherits": "Snapmaker PVA @U1 base",
 	"from": "system",
 	"setting_id": "WxtuvwWxy73Gi0IK",
 	"instantiation": "true",
-	"name": "Snapmaker PVA @U1 0.8 nozzle",
-	"inherits": "Snapmaker PVA @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.8 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker PVA @U1 base",
-	"filament_id": "31046369800",
 	"inherits": "fdm_filament_pva",
+	"from": "system",
+	"filament_id": "31046369800",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
+	"name": "Snapmaker PVA @U1",
+	"inherits": "Snapmaker PVA @U1 base",
 	"from": "system",
 	"setting_id": "A9gyeySGTtUrTPeG",
 	"instantiation": "true",
-	"name": "Snapmaker PVA @U1",
-	"inherits": "Snapmaker PVA @U1 base",
 	"compatible_printers": [
 		"Snapmaker U1 (0.4 nozzle)"
 	],

resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json

@@ -1,9 +1,9 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker TPU 95A @U1 base",
+	"from": "system",
 	"filament_id": "297165629001",
+	"instantiation": "false",
 	"overhang_fan_threshold": [
 		"95%"
 	],

resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 base.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"from": "system",
-	"instantiation": "false",
 	"name": "Snapmaker TPU @U1 base",
-	"filament_id": "29716562900",
 	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"filament_id": "29716562900",
+	"instantiation": "false",
 	"filament_end_gcode": [
 		""
 	],

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
 	"name": "Snapmaker U1 (0.2 nozzle)",
+	"inherits": "fdm_U1",
 	"from": "system",
 	"setting_id": "CwJeuh1rxZcjvkXh",
 	"instantiation": "true",
-	"inherits": "fdm_U1",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.2",
 	"auxiliary_fan": "1",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
 	"name": "Snapmaker U1 (0.4 nozzle)",
+	"inherits": "fdm_U1",
 	"from": "system",
 	"setting_id": "UeTP4RqAd7xAMHVE",
 	"instantiation": "true",
-	"inherits": "fdm_U1",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.4",
 	"auxiliary_fan": "1",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
-	"setting_id": "O6AMxX1Ptbtv4zCK",
 	"name": "Snapmaker U1 (0.4+0.6 nozzle)",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "fdm_U1",
+	"from": "system",
+	"setting_id": "O6AMxX1Ptbtv4zCK",
+	"instantiation": "true",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.4+0.6",
 	"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle)",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
 	"name": "Snapmaker U1 (0.6 nozzle)",
+	"inherits": "fdm_U1",
 	"from": "system",
 	"setting_id": "1OseO7RSPgE4CRKO",
 	"instantiation": "true",
-	"inherits": "fdm_U1",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.6",
 	"auxiliary_fan": "1",

resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json

@@ -1,10 +1,10 @@
 {
 	"type": "machine",
 	"name": "Snapmaker U1 (0.8 nozzle)",
+	"inherits": "fdm_U1",
 	"from": "system",
 	"setting_id": "WTkhQtyDO06YY6AG",
 	"instantiation": "true",
-	"inherits": "fdm_U1",
 	"printer_model": "Snapmaker U1",
 	"printer_variant": "0.8",
 	"auxiliary_fan": "1",

resources/profiles/Snapmaker/machine/Snapmaker U1.json

@@ -1,8 +1,8 @@
 {
 	"type": "machine_model",
+	"name": "Snapmaker U1",
 	"machine_tech": "FFF",
 	"family": "Snapmaker",
-	"name": "Snapmaker U1",
 	"url": "",
 	"model_id": "797581801",
 	"bed_model": "Snapmaker U1_bed.stl",

resources/profiles/Snapmaker/machine/fdm_U1.json

@@ -1,9 +1,9 @@
 {
 	"type": "machine",
 	"name": "fdm_U1",
+	"inherits": "fdm_toolchanger",
 	"from": "system",
 	"instantiation": "false",
-	"inherits": "fdm_toolchanger",
 	"gcode_flavor": "klipper",
 	"single_extruder_multi_material": "0",
 	"bed_model": "Snapmaker U1_bed.stl",

resources/profiles/Snapmaker/process/fdm_process_U1_common.json

@@ -45,7 +45,7 @@
 	"internal_solid_infill_speed": "150",
 	"initial_layer_infill_speed": "60",
 	"resolution": "0.012",
-	"support_type": "normal(auto)",
+	"support_type": "tree(auto)",
 	"support_style": "default",
 	"support_top_z_distance": "0.2",
 	"support_bottom_z_distance": "0.2",

resources/profiles/Snapmaker/process/fdm_process_common.json

@@ -110,7 +110,7 @@
 	"top_surface_jerk": "2",
 	"travel_jerk": "4",
 	"enable_support": "0",
-	"support_type": "normal(auto)",
+	"support_type": "tree(auto)",
 	"support_style": "snug",
 	"support_threshold_angle": "30",
 	"support_on_build_plate_only": "1",