Reapply "Sync Bambu Lab profiles with BambuStudio"

This reverts commit b46916a8be.

resources/profiles/BBL/cli_config.json

@@ -30,6 +30,7 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
+                    "Bambu Lab H2C 0.2 nozzle",
                     "Bambu Lab X2D 0.2 nozzle"
                 ],
                 "Bambu Lab A1 0.4 nozzle": [
@@ -43,6 +44,7 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
+                    "Bambu Lab H2C 0.4 nozzle",
                     "Bambu Lab X2D 0.4 nozzle"
                 ],
                 "Bambu Lab A1 0.6 nozzle": [
@@ -56,6 +58,7 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
+                    "Bambu Lab H2C 0.6 nozzle",
                     "Bambu Lab X2D 0.6 nozzle"
                 ],
                 "Bambu Lab A1 0.8 nozzle": [
@@ -69,6 +72,7 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
+                    "Bambu Lab H2C 0.8 nozzle",
                     "Bambu Lab X2D 0.8 nozzle"
                 ]
             }
@@ -102,6 +106,7 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
+                    "Bambu Lab H2C 0.2 nozzle",
                     "Bambu Lab X2D 0.2 nozzle"
                 ],
                 "Bambu Lab A1 mini 0.4 nozzle": [
@@ -114,6 +119,7 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
+                    "Bambu Lab H2C 0.4 nozzle",
                     "Bambu Lab X2D 0.4 nozzle"
                 ],
                 "Bambu Lab A1 mini 0.6 nozzle": [
@@ -126,6 +132,7 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
+                    "Bambu Lab H2C 0.6 nozzle",
                     "Bambu Lab X2D 0.6 nozzle"
                 ],
                 "Bambu Lab A1 mini 0.8 nozzle": [
@@ -138,6 +145,7 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
+                    "Bambu Lab H2C 0.8 nozzle",
                     "Bambu Lab X2D 0.8 nozzle"
                 ]
             }
@@ -151,7 +159,9 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab X1 0.4 nozzle": [
                     "Bambu Lab A1 mini 0.4 nozzle",
@@ -160,7 +170,9 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab X1 0.6 nozzle": [
                     "Bambu Lab A1 mini 0.6 nozzle",
@@ -169,7 +181,9 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab X1 0.8 nozzle": [
                     "Bambu Lab A1 mini 0.8 nozzle",
@@ -178,7 +192,9 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -191,7 +207,9 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab X1 Carbon 0.4 nozzle": [
                     "Bambu Lab A1 mini 0.4 nozzle",
@@ -200,7 +218,9 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab X1 Carbon 0.6 nozzle": [
                     "Bambu Lab A1 mini 0.6 nozzle",
@@ -209,7 +229,9 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab X1 Carbon 0.8 nozzle": [
                     "Bambu Lab A1 mini 0.8 nozzle",
@@ -218,7 +240,9 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -231,7 +255,9 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab X1E 0.4 nozzle": [
                     "Bambu Lab A1 mini 0.4 nozzle",
@@ -240,7 +266,9 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab X1E 0.6 nozzle": [
                     "Bambu Lab A1 mini 0.6 nozzle",
@@ -249,7 +277,9 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab X1E 0.8 nozzle": [
                     "Bambu Lab A1 mini 0.8 nozzle",
@@ -258,7 +288,9 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -271,7 +303,9 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab P1P 0.4 nozzle": [
                     "Bambu Lab A1 mini 0.4 nozzle",
@@ -280,7 +314,9 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab P1P 0.6 nozzle": [
                     "Bambu Lab A1 mini 0.6 nozzle",
@@ -289,7 +325,9 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab P1P 0.8 nozzle": [
                     "Bambu Lab A1 mini 0.8 nozzle",
@@ -298,7 +336,9 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -311,7 +351,9 @@
                     "Bambu Lab H2D Pro 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab P1S 0.4 nozzle": [
                     "Bambu Lab A1 mini 0.4 nozzle",
@@ -320,7 +362,9 @@
                     "Bambu Lab H2D Pro 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab P1S 0.6 nozzle": [
                     "Bambu Lab A1 mini 0.6 nozzle",
@@ -329,7 +373,9 @@
                     "Bambu Lab H2D Pro 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab P1S 0.8 nozzle": [
                     "Bambu Lab A1 mini 0.8 nozzle",
@@ -338,7 +384,9 @@
                     "Bambu Lab H2D Pro 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -354,7 +402,9 @@
                     "Bambu Lab A1 mini 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab H2D 0.4 nozzle": [
                     "Bambu Lab P1S 0.4 nozzle",
@@ -366,7 +416,9 @@
                     "Bambu Lab A1 mini 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab H2D 0.6 nozzle": [
                     "Bambu Lab P1S 0.6 nozzle",
@@ -378,7 +430,9 @@
                     "Bambu Lab A1 mini 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab H2D 0.8 nozzle": [
                     "Bambu Lab P1S 0.8 nozzle",
@@ -390,7 +444,9 @@
                     "Bambu Lab A1 mini 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -406,7 +462,9 @@
                     "Bambu Lab A1 mini 0.2 nozzle",
                     "Bambu Lab H2S 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab H2D Pro 0.4 nozzle": [
                     "Bambu Lab P1S 0.4 nozzle",
@@ -418,7 +476,9 @@
                     "Bambu Lab A1 mini 0.4 nozzle",
                     "Bambu Lab H2S 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab H2D Pro 0.6 nozzle": [
                     "Bambu Lab P1S 0.6 nozzle",
@@ -430,7 +490,9 @@
                     "Bambu Lab A1 mini 0.6 nozzle",
                     "Bambu Lab H2S 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab H2D Pro 0.8 nozzle": [
                     "Bambu Lab P1S 0.8 nozzle",
@@ -442,7 +504,9 @@
                     "Bambu Lab A1 mini 0.8 nozzle",
                     "Bambu Lab H2S 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -459,7 +523,9 @@
                     "Bambu Lab X1 Carbon 0.2 nozzle",
                     "Bambu Lab X1E 0.2 nozzle",
                     "Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab H2S 0.4 nozzle": [
                     "Bambu Lab A1 0.4 nozzle",
@@ -472,7 +538,9 @@
                     "Bambu Lab X1 Carbon 0.4 nozzle",
                     "Bambu Lab X1E 0.4 nozzle",
                     "Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab H2S 0.6 nozzle": [
                     "Bambu Lab A1 0.6 nozzle",
@@ -485,7 +553,9 @@
                     "Bambu Lab X1 Carbon 0.6 nozzle",
                     "Bambu Lab X1E 0.6 nozzle",
                     "Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab H2S 0.8 nozzle": [
                     "Bambu Lab A1 0.8 nozzle",
@@ -498,7 +568,9 @@
                     "Bambu Lab X1 Carbon 0.8 nozzle",
                     "Bambu Lab X1E 0.8 nozzle",
                     "Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab X2D 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
                 ]
             }
         },
@@ -515,7 +587,9 @@
                     "Bambu Lab X1 0.2 nozzle",
                     "Bambu Lab X1 Carbon 0.2 nozzle",
                     "Bambu Lab X1E 0.2 nozzle",
-					"Bambu Lab X2D 0.2 nozzle"
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab X2D 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
                 ],
                 "Bambu Lab P2S 0.4 nozzle": [
                     "Bambu Lab A1 0.4 nozzle",
@@ -528,7 +602,9 @@
                     "Bambu Lab X1 0.4 nozzle",
                     "Bambu Lab X1 Carbon 0.4 nozzle",
                     "Bambu Lab X1E 0.4 nozzle",
-					"Bambu Lab X2D 0.4 nozzle"
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab X2D 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
                 ],
                 "Bambu Lab P2S 0.6 nozzle": [
                     "Bambu Lab A1 0.6 nozzle",
@@ -541,7 +617,9 @@
                     "Bambu Lab X1 0.6 nozzle",
                     "Bambu Lab X1 Carbon 0.6 nozzle",
                     "Bambu Lab X1E 0.6 nozzle",
-					"Bambu Lab X2D 0.6 nozzle"
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab X2D 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
                 ],
                 "Bambu Lab P2S 0.8 nozzle": [
                     "Bambu Lab A1 0.8 nozzle",
@@ -554,67 +632,9 @@
                     "Bambu Lab X1 0.8 nozzle",
                     "Bambu Lab X1 Carbon 0.8 nozzle",
                     "Bambu Lab X1E 0.8 nozzle",
-					"Bambu Lab X2D 0.8 nozzle"
+                    "Bambu Lab H2C 0.8 nozzle",
-				]
+                    "Bambu Lab X2D 0.8 nozzle",
-			}
+                    "Bambu Lab A2L 0.8 nozzle"
-		},
-		"Bambu Lab X2D": {
-			"downward_check": {
-				"Bambu Lab X2D 0.2 nozzle": [
-					"Bambu Lab A1 0.2 nozzle",
-					"Bambu Lab A1 mini 0.2 nozzle",
-					"Bambu Lab X1 0.2 nozzle",
-					"Bambu Lab X1 Carbon 0.2 nozzle",
-					"Bambu Lab X1E 0.2 nozzle",
-					"Bambu Lab P1P 0.2 nozzle",
-					"Bambu Lab P1S 0.2 nozzle",
-					"Bambu Lab H2D 0.2 nozzle",
-					"Bambu Lab H2D Pro 0.2 nozzle",
-					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle",
-					"Bambu Lab H2C 0.2 nozzle"
-				],
-				"Bambu Lab X2D 0.4 nozzle": [
-					"Bambu Lab A1 0.4 nozzle",
-					"Bambu Lab A1 mini 0.4 nozzle",
-					"Bambu Lab X1 0.4 nozzle",
-					"Bambu Lab X1 Carbon 0.4 nozzle",
-					"Bambu Lab X1E 0.4 nozzle",
-					"Bambu Lab P1P 0.4 nozzle",
-					"Bambu Lab P1S 0.4 nozzle",
-					"Bambu Lab H2D 0.4 nozzle",
-					"Bambu Lab H2D Pro 0.4 nozzle",
-					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle",
-					"Bambu Lab H2C 0.4 nozzle"
-				],
-				"Bambu Lab X2D 0.6 nozzle": [
-					"Bambu Lab A1 0.6 nozzle",
-					"Bambu Lab A1 mini 0.6 nozzle",
-					"Bambu Lab X1 0.6 nozzle",
-					"Bambu Lab X1 Carbon 0.6 nozzle",
-					"Bambu Lab X1E 0.6 nozzle",
-					"Bambu Lab P1P 0.6 nozzle",
-					"Bambu Lab P1S 0.6 nozzle",
-					"Bambu Lab H2D 0.6 nozzle",
-					"Bambu Lab H2D Pro 0.6 nozzle",
-					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle",
-					"Bambu Lab H2C 0.6 nozzle"
-				],
-				"Bambu Lab X2D 0.8 nozzle": [
-					"Bambu Lab A1 0.8 nozzle",
-					"Bambu Lab A1 mini 0.8 nozzle",
-					"Bambu Lab X1 0.8 nozzle",
-					"Bambu Lab X1 Carbon 0.8 nozzle",
-					"Bambu Lab X1E 0.8 nozzle",
-					"Bambu Lab P1P 0.8 nozzle",
-					"Bambu Lab P1S 0.8 nozzle",
-					"Bambu Lab H2D 0.8 nozzle",
-					"Bambu Lab H2D Pro 0.8 nozzle",
-					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle",
-					"Bambu Lab H2C 0.8 nozzle"
                 ]
             }
         },
@@ -682,6 +702,70 @@
                 ]
             }
         },
+        "Bambu Lab X2D": {
+            "downward_check": {
+                "Bambu Lab X2D 0.2 nozzle": [
+                    "Bambu Lab A1 0.2 nozzle",
+                    "Bambu Lab A1 mini 0.2 nozzle",
+                    "Bambu Lab X1 0.2 nozzle",
+                    "Bambu Lab X1 Carbon 0.2 nozzle",
+                    "Bambu Lab X1E 0.2 nozzle",
+                    "Bambu Lab P1P 0.2 nozzle",
+                    "Bambu Lab P1S 0.2 nozzle",
+                    "Bambu Lab H2D 0.2 nozzle",
+                    "Bambu Lab H2D Pro 0.2 nozzle",
+                    "Bambu Lab H2S 0.2 nozzle",
+                    "Bambu Lab P2S 0.2 nozzle",
+                    "Bambu Lab H2C 0.2 nozzle",
+                    "Bambu Lab A2L 0.2 nozzle"
+                ],
+                "Bambu Lab X2D 0.4 nozzle": [
+                    "Bambu Lab A1 0.4 nozzle",
+                    "Bambu Lab A1 mini 0.4 nozzle",
+                    "Bambu Lab X1 0.4 nozzle",
+                    "Bambu Lab X1 Carbon 0.4 nozzle",
+                    "Bambu Lab X1E 0.4 nozzle",
+                    "Bambu Lab P1P 0.4 nozzle",
+                    "Bambu Lab P1S 0.4 nozzle",
+                    "Bambu Lab H2D 0.4 nozzle",
+                    "Bambu Lab H2D Pro 0.4 nozzle",
+                    "Bambu Lab H2S 0.4 nozzle",
+                    "Bambu Lab P2S 0.4 nozzle",
+                    "Bambu Lab H2C 0.4 nozzle",
+                    "Bambu Lab A2L 0.4 nozzle"
+                ],
+                "Bambu Lab X2D 0.6 nozzle": [
+                    "Bambu Lab A1 0.6 nozzle",
+                    "Bambu Lab A1 mini 0.6 nozzle",
+                    "Bambu Lab X1 0.6 nozzle",
+                    "Bambu Lab X1 Carbon 0.6 nozzle",
+                    "Bambu Lab X1E 0.6 nozzle",
+                    "Bambu Lab P1P 0.6 nozzle",
+                    "Bambu Lab P1S 0.6 nozzle",
+                    "Bambu Lab H2D 0.6 nozzle",
+                    "Bambu Lab H2D Pro 0.6 nozzle",
+                    "Bambu Lab H2S 0.6 nozzle",
+                    "Bambu Lab P2S 0.6 nozzle",
+                    "Bambu Lab H2C 0.6 nozzle",
+                    "Bambu Lab A2L 0.6 nozzle"
+                ],
+                "Bambu Lab X2D 0.8 nozzle": [
+                    "Bambu Lab A1 0.8 nozzle",
+                    "Bambu Lab A1 mini 0.8 nozzle",
+                    "Bambu Lab X1 0.8 nozzle",
+                    "Bambu Lab X1 Carbon 0.8 nozzle",
+                    "Bambu Lab X1E 0.8 nozzle",
+                    "Bambu Lab P1P 0.8 nozzle",
+                    "Bambu Lab P1S 0.8 nozzle",
+                    "Bambu Lab H2D 0.8 nozzle",
+                    "Bambu Lab H2D Pro 0.8 nozzle",
+                    "Bambu Lab H2S 0.8 nozzle",
+                    "Bambu Lab P2S 0.8 nozzle",
+                    "Bambu Lab H2C 0.8 nozzle",
+                    "Bambu Lab A2L 0.8 nozzle"
+                ]
+            }
+        },
         "Bambu Lab A2L": {
             "machine_limits": {
                 "cli_safe_acceleration_e": "0,0",

resources/profiles/BBL/filament/Bambu ABS @BBL A1.json

@@ -17,6 +17,9 @@
     "filament_retraction_distances_when_cut": [
         "18"
     ],
+    "filament_retraction_length": [
+        "0.4"
+    ],
     "hot_plate_temp": [
         "100"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json

@@ -77,105 +77,8 @@
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
         "270",

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json

@@ -14,33 +14,44 @@
     "counter_coef_3": [
         "0.0241"
     ],
-	"counter_limit_max": [
-		"0.3341"
-	],
     "counter_limit_min": [
         "0.0241"
     ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_change_length": [
-		"4"
-	],
     "filament_cooling_before_tower": [
+        "10",
         "10",
         "10"
     ],
     "filament_flow_ratio": [
+        "0.98",
         "0.98",
         "0.98"
     ],
     "filament_max_volumetric_speed": [
         "25",
-		"30"
+        "30",
+        "25"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
     ],
     "filament_prime_volume": [
         "30"
@@ -48,137 +59,62 @@
     "filament_prime_volume_nc": [
         "30"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
     "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
     "filament_ramming_travel_time_nc": [
         "1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_wipe": [
         "1",
         "1"
     ],
-	"filament_wipe_distance": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
     ],
     "filament_change_length_nc": [
         "4"
     ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
     "hole_coef_2": [
         "-0.0008"
     ],
     "hole_coef_3": [
         "0.1319"
     ],
-	"hole_limit_max": [
-		"0.1319"
-	],
     "hole_limit_min": [
         "0.1119"
     ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
     "filament_preheat_temperature_delta": [
+        "20",
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
@@ -186,6 +122,7 @@
         "12"
     ],
     "slow_down_min_speed": [
+        "20",
         "20",
         "20"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json

@@ -94,85 +94,8 @@
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
         "270",

resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json

@@ -14,33 +14,44 @@
     "counter_coef_3": [
         "0.0241"
     ],
-	"counter_limit_max": [
-		"0.3341"
-	],
     "counter_limit_min": [
         "0.0241"
     ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_change_length": [
-		"4"
-	],
     "filament_cooling_before_tower": [
+        "10",
         "10",
         "10"
     ],
     "filament_flow_ratio": [
+        "0.98",
         "0.98",
         "0.98"
     ],
     "filament_max_volumetric_speed": [
         "20",
-		"30"
+        "30",
+        "20"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.6",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
     ],
     "filament_prime_volume": [
         "30"
@@ -48,137 +59,62 @@
     "filament_prime_volume_nc": [
         "30"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
     "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
     "filament_ramming_travel_time_nc": [
         "1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.6"
-	],
-	"filament_wipe": [
         "1",
         "1"
     ],
-	"filament_wipe_distance": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
     ],
     "filament_change_length_nc": [
         "4"
     ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
     "hole_coef_2": [
         "-0.0008"
     ],
     "hole_coef_3": [
         "0.1319"
     ],
-	"hole_limit_max": [
-		"0.1319"
-	],
     "hole_limit_min": [
         "0.1119"
     ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
     "filament_preheat_temperature_delta": [
+        "20",
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
@@ -186,6 +122,7 @@
         "12"
     ],
     "slow_down_min_speed": [
+        "20",
         "20",
         "20"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json

@@ -8,100 +8,53 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_prime_volume": [
-		"0",
+        "30"
-		"0"
     ],
-	"long_retractions_when_ec": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "nozzle_temperature": [
         "270",
@@ -111,16 +64,12 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json

@@ -8,123 +8,94 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "filament_cooling_before_tower": [
-		"0.95",
+        "10",
-		"0.95"
+        "10",
-	],
+        "10"
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
-		"35"
+        "35",
+        "25"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
     ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
+        "1",
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "hole_coef_2": [
-		"Direct Drive Standard",
+        "-0.0008"
-		"Direct Drive High Flow"
     ],
-	"filament_pre_cooling_temperature": [
+    "hole_coef_3": [
-		"0",
+        "0.1319"
-		"0"
     ],
-	"filament_ramming_travel_time": [
+    "hole_limit_max": [
-		"0",
+        "0.1319"
-		"0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_limit_min": [
-		"0",
+        "0.1119"
-		"0"
     ],
-	"filament_extruder_id": [
+    "include": [
-		"1",
+        "fdm_filament_template_direct_dual_e3d"
-		"1"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json

@@ -8,65 +8,33 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -75,33 +43,34 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_prime_volume": [
-		"0",
+        "30"
-		"0"
     ],
-	"long_retractions_when_ec": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "nozzle_temperature": [
         "260",
@@ -111,16 +80,12 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json

@@ -8,119 +8,94 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "filament_cooling_before_tower": [
-		"0.95",
+        "10",
-		"0.95"
+        "10",
-	],
+        "10"
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "20",
-		"35"
+        "35",
+        "20"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
     ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
         "1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
         "1",
         "1"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json

@@ -11,97 +11,20 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -111,16 +34,12 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json

@@ -11,62 +11,22 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -75,33 +35,12 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "include": [
-		"Direct Drive Standard",
+        "fdm_filament_template_direct_dual"
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -111,16 +50,12 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json

@@ -11,62 +11,22 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -75,33 +35,12 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "include": [
-		"Direct Drive Standard",
+        "fdm_filament_template_direct_dual"
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "260",
@@ -111,16 +50,12 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json

@@ -11,62 +11,22 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "20",
         "30"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -75,33 +35,12 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "include": [
-		"Direct Drive Standard",
+        "fdm_filament_template_direct_dual"
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -111,16 +50,12 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json

@@ -8,99 +8,60 @@
     "chamber_temperatures": [
         "60"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
     "fan_min_speed": [
         "40"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
     ],
     "filament_flush_volumetric_speed": [
         "3",
         "3"
     ],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -127,9 +88,9 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json

@@ -8,106 +8,89 @@
     "chamber_temperatures": [
         "60"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "filament_cooling_before_tower": [
-		"0.95",
+        "10",
-		"0.95"
+        "10",
-	],
+        "10"
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
-		"35"
+        "35",
+        "25"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
+        "1",
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
         "0",
         "0"
     ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
@@ -118,15 +101,17 @@
         "2"
     ],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json

@@ -8,65 +8,33 @@
     "chamber_temperatures": [
         "60"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -75,29 +43,34 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
     ],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -124,9 +97,9 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json

@@ -8,106 +8,89 @@
     "chamber_temperatures": [
         "60"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "filament_cooling_before_tower": [
-		"0.95",
+        "10",
-		"0.95"
+        "10",
-	],
+        "10"
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "20",
-		"35"
+        "35",
+        "20"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
+        "1",
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
         "0",
         "0"
     ],
+    "hole_coef_2": [
+        "-0.0008"
+    ],
+    "hole_coef_3": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
@@ -118,15 +101,17 @@
         "2"
     ],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.4 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_38",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.4 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json

@@ -0,0 +1,72 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL P1S 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_39",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4"
+    ],
+    "filament_retraction_speed": [
+        "nil",
+        "40"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab P1S 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json

@@ -11,132 +11,55 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
     "fan_min_speed": [
         "40"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
     ],
     "filament_flush_volumetric_speed": [
         "3",
         "3"
     ],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_ramming_travel_time_nc": [
+    "filament_retraction_distances_when_cut": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
         "10",
         "10"
     ],
-	"filament_overhang_totally_speed": [
+    "hole_coef_2": [
-		"10",
+        "-0.0008"
-		"10"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "hole_coef_3": [
-		"0",
+        "0.1319"
-		"0"
+    ],
+    "hole_limit_max": [
+        "0.1319"
+    ],
+    "hole_limit_min": [
+        "0.1119"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -150,10 +73,6 @@
         "260",
         "260"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
         "0",
         "0"
@@ -161,9 +80,9 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json

@@ -5,165 +5,96 @@
     "from": "system",
     "setting_id": "GFSB00_36",
     "instantiation": "true",
-	"activate_air_filtration": [
-		"0"
-	],
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "16",
-		"35"
+        "35",
-	],
+        "16"
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
+        "10",
         "10",
         "10"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
         "0",
         "0"
     ],
-	"filament_enable_overhang_speed": [
+    "hole_coef_2": [
-		"1",
+        "-0.0008"
-		"1"
     ],
-	"filament_overhang_1_4_speed": [
+    "hole_coef_3": [
-		"0",
+        "0.1319"
-		"0"
     ],
-	"filament_overhang_2_4_speed": [
+    "hole_limit_min": [
-		"50",
+        "0.1119"
-		"50"
     ],
-	"filament_overhang_3_4_speed": [
+    "hole_limit_max": [
-		"30",
+        "0.1319"
-		"30"
     ],
-	"filament_overhang_4_4_speed": [
+    "include": [
-		"10",
+        "fdm_filament_template_direct_dual_e3d"
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
     ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json

@@ -11,52 +11,32 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "18",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
         "10",
@@ -66,77 +46,24 @@
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "hole_coef_2": [
-		"Direct Drive Standard",
+        "-0.0008"
-		"Direct Drive High Flow"
     ],
-	"filament_pre_cooling_temperature": [
+    "hole_coef_3": [
-		"0",
+        "0.1319"
-		"0"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "hole_limit_max": [
-		"0",
+        "0.1319"
-		"0"
     ],
-	"filament_ramming_travel_time": [
+    "hole_limit_min": [
-		"0",
+        "0.1119"
-		"0"
     ],
-	"filament_ramming_travel_time_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -150,10 +77,6 @@
         "260",
         "260"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
         "0",
         "0"
@@ -161,13 +84,6 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "compatible_printers": [
         "Bambu Lab P2S 0.8 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json

@@ -11,159 +11,93 @@
     "chamber_temperatures": [
         "65"
     ],
+    "counter_coef_2": [
+        "0.0124"
+    ],
+    "counter_coef_3": [
+        "0.0241"
+    ],
+    "counter_limit_min": [
+        "0.0241"
+    ],
+    "counter_limit_max": [
+        "0.3341"
+    ],
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "16",
-		"25"
+        "25",
-	],
+        "16"
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
+        "10",
         "10",
         "10"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
         "0",
         "0"
     ],
-	"filament_enable_overhang_speed": [
+    "hole_coef_2": [
-		"1",
+        "-0.0008"
-		"1"
     ],
-	"filament_overhang_1_4_speed": [
+    "hole_coef_3": [
-		"0",
+        "0.1319"
-		"0"
     ],
-	"filament_overhang_2_4_speed": [
+    "hole_limit_min": [
-		"50",
+        "0.1119"
-		"50"
     ],
-	"filament_overhang_3_4_speed": [
+    "hole_limit_max": [
-		"30",
+        "0.1319"
-		"30"
     ],
-	"filament_overhang_4_4_speed": [
+    "include": [
-		"10",
+        "fdm_filament_template_direct_dual_e3d"
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
     ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json

@@ -20,81 +20,12 @@
         "18",
         "18"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -115,9 +46,9 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json

@@ -0,0 +1,64 @@
+{
+    "type": "filament",
+    "name": "Bambu ABS @BBL X1C 0.6 nozzle",
+    "inherits": "Bambu ABS @base",
+    "from": "system",
+    "setting_id": "GFSB00_40",
+    "instantiation": "true",
+    "fan_max_speed": [
+        "60"
+    ],
+    "filament_long_retractions_when_cut": [
+        "1",
+        "nil"
+    ],
+    "filament_max_volumetric_speed": [
+        "16",
+        "25"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "18",
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.8"
+    ],
+    "filament_z_hop": [
+        "nil",
+        "0.6"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
+    ],
+    "long_retractions_when_ec": [
+        "0",
+        "0"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "260",
+        "260"
+    ],
+    "retraction_distances_when_ec": [
+        "0",
+        "0"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X1 Carbon 0.6 nozzle"
+    ]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json

@@ -20,81 +20,16 @@
         "18",
         "18"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "nil"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -115,13 +50,6 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",

resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json

@@ -8,93 +8,40 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_deretraction_speed": [
+        "nil",
+        "40"
+    ],
     "filament_long_retractions_when_cut": [
         "1",
-		"1"
+        "nil"
     ],
     "filament_max_volumetric_speed": [
         "16",
-		"16"
+        "25"
     ],
     "filament_retraction_distances_when_cut": [
         "18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
         "nil"
     ],
     "filament_retraction_length": [
-		"nil",
+        "0.4",
-		"nil"
+        "0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_speed": [
         "nil",
-		"nil"
+        "40"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
     ],
     "filament_z_hop": [
         "nil",
-		"nil"
+        "0.6"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -115,16 +62,13 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab X1 Carbon 0.6 nozzle",
+        "Bambu Lab X1 0.6 nozzle"
-		"Bambu Lab X1 0.6 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
-		"Bambu Lab P1S 0.6 nozzle"
     ]
 }

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json

@@ -8,22 +8,6 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_long_retractions_when_cut": [
         "1",
         "1"
@@ -32,69 +16,16 @@
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -115,9 +46,9 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1E 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json

@@ -8,22 +8,6 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_long_retractions_when_cut": [
         "1",
         "1"
@@ -32,69 +16,20 @@
         "18",
         "18"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_retraction_length": [
-		"0",
+        "0.4",
-		"0"
+        "nil"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -115,13 +50,6 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"slow_down_min_speed": [
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "compatible_printers": [
         "Bambu Lab X1E 0.8 nozzle"
     ]

resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json

@@ -8,22 +8,6 @@
     "fan_max_speed": [
         "60"
     ],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_long_retractions_when_cut": [
         "1",
         "1"
@@ -32,69 +16,20 @@
         "16",
         "16"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
     "filament_retraction_length": [
-		"nil",
+        "0.4",
         "nil"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -115,9 +50,9 @@
     "slow_down_layer_time": [
         "12"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1E 0.4 nozzle",

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB00_20",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3",
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -239,6 +23,12 @@
     "fan_min_speed": [
         "80"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
@@ -248,6 +38,12 @@
         "0.95",
         "0.95"
     ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3",
+        "3",
+        "3"
+    ],
     "filament_max_volumetric_speed": [
         "2",
         "2",
@@ -260,9 +56,33 @@
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
     "hole_coef_2": [
         "-0.0008"
     ],
@@ -275,6 +95,9 @@
     "hole_limit_min": [
         "0.1119"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
     "nozzle_temperature": [
         "270",
         "270",
@@ -287,9 +110,21 @@
         "260",
         "260"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.2 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB00_09",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -239,10 +23,20 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
     "filament_flow_ratio": [
+        "0.95",
+        "0.95",
         "0.95",
         "0.95",
         "0.95",
@@ -252,17 +46,61 @@
         "16",
         "25",
         "16",
-		"18"
+        "16",
+        "18",
+        "16"
     ],
     "filament_ramming_travel_time": [
+        "0",
+        "0",
         "0",
         "0",
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
     "hole_coef_2": [
         "-0.0008"
     ],
@@ -275,21 +113,47 @@
     "hole_limit_min": [
         "0.1119"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
         "260",
         "260",
         "260",
         "260"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.4 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB00_30",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -239,6 +23,12 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
@@ -260,9 +50,39 @@
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
     "hole_coef_2": [
         "-0.0008"
     ],
@@ -275,6 +95,9 @@
     "hole_limit_min": [
         "0.1119"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
     "nozzle_temperature": [
         "270",
         "270",
@@ -287,9 +110,21 @@
         "260",
         "260"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.8 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB00_19",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -239,10 +23,20 @@
     "fan_max_speed": [
         "60"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
     "filament_flow_ratio": [
+        "0.95",
+        "0.95",
         "0.95",
         "0.95",
         "0.95",
@@ -252,17 +46,61 @@
         "16",
         "35",
         "16",
+        "16",
+        "16",
         "16"
     ],
     "filament_ramming_travel_time": [
+        "0",
+        "0",
         "0",
         "0",
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "1",
+        "nil",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "1",
+        "nil",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift"
+    ],
     "hole_coef_2": [
         "-0.0008"
     ],
@@ -275,21 +113,44 @@
     "hole_limit_min": [
         "0.1119"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
         "260",
         "260",
         "260",
         "260"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
     "slow_down_layer_time": [
         "12"
     ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.6 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ABS @base.json

@@ -7,7 +7,7 @@
     "instantiation": "false",
     "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
     "filament_cost": [
-		"24.99"
+        "15.99"
     ],
     "filament_flow_ratio": [
         "0.95"

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json

@@ -9,10 +9,12 @@
         "60"
     ],
     "filament_cooling_before_tower": [
+        "10",
         "10",
         "10"
     ],
     "filament_max_volumetric_speed": [
+        "12",
         "12",
         "12"
     ],
@@ -23,14 +25,17 @@
         "30"
     ],
     "filament_pre_cooling_temperature_nc": [
+        "230",
         "230",
         "230"
     ],
     "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
     "filament_ramming_travel_time_nc": [
+        "1",
         "1",
         "1"
     ],
@@ -44,118 +49,25 @@
         "4"
     ],
     "filament_preheat_temperature_delta": [
+        "20",
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
     "slow_down_min_speed": [
+        "20",
         "20",
         "20"
     ],

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json

@@ -9,10 +9,12 @@
         "60"
     ],
     "filament_cooling_before_tower": [
+        "10",
         "10",
         "10"
     ],
     "filament_max_volumetric_speed": [
+        "12",
         "12",
         "12"
     ],
@@ -23,14 +25,17 @@
         "30"
     ],
     "filament_pre_cooling_temperature_nc": [
+        "230",
         "230",
         "230"
     ],
     "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
     "filament_ramming_travel_time_nc": [
+        "1",
         "1",
         "1"
     ],
@@ -44,118 +49,25 @@
         "4"
     ],
     "filament_preheat_temperature_delta": [
+        "20",
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
     "slow_down_min_speed": [
+        "20",
         "20",
         "20"
     ],

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json

@@ -8,113 +8,44 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
+        "12",
         "12",
         "12"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
         "0",
         "0"
     ],
-	"long_retractions_when_ec": [
+    "filament_prime_volume": [
-		"1",
+        "30"
-		"1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20"
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.4 nozzle",

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json

@@ -8,97 +8,20 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "12",
         "12"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -108,13 +31,9 @@
         "260",
         "260"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.4 nozzle",

resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json

@@ -8,113 +8,54 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
+        "12",
         "12",
         "12"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
         "0",
         "0"
     ],
+    "filament_change_length": [
+        "4"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.4 nozzle",

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json

@@ -9,89 +9,20 @@
         "1",
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
     "filament_max_volumetric_speed": [
         "12",
         "12"
     ],
-	"filament_deretraction_speed": [
+    "filament_retraction_distances_when_cut": [
-		"nil",
+        "18",
-		"nil"
+        "18"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -109,9 +40,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab P1P 0.8 nozzle",

resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json

@@ -11,153 +11,53 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
+        "12",
         "12",
         "12"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
         "0",
         "0"
     ],
-	"filament_enable_overhang_speed": [
+    "filament_retraction_distances_when_cut": [
-		"1",
+        "10",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
         "10",
         "10"
     ],
-	"filament_overhang_totally_speed": [
+    "include": [
-		"10",
+        "fdm_filament_template_direct_dual_e3d"
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
     ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
         "260",
         "260"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.4 nozzle",

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json

@@ -9,89 +9,20 @@
         "1",
         "1"
     ],
-	"filament_retraction_distances_when_cut": [
-		"18",
-		"18"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
     "filament_max_volumetric_speed": [
         "12",
         "12"
     ],
-	"filament_deretraction_speed": [
+    "filament_retraction_distances_when_cut": [
-		"nil",
+        "18",
-		"nil"
+        "18"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -109,9 +40,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab P1S 0.4 nozzle",

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json

@@ -5,258 +5,95 @@
     "from": "system",
     "setting_id": "GFSB50_06",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "60"
-		"0",
-		"0",
-		"0"
     ],
     "filament_cooling_before_tower": [
         "10",
         "10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
         "10",
         "10",
         "10",
         "10"
     ],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"1",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
     "filament_flow_ratio": [
+        "0.95",
+        "0.95",
         "0.95",
         "0.95",
         "0.95",
         "0.95"
     ],
     "filament_max_volumetric_speed": [
+        "12",
+        "12",
         "12",
         "12",
         "12",
         "12"
     ],
     "filament_ramming_travel_time": [
+        "0",
+        "0",
         "0",
         "0",
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "1",
+        "1",
+        "1",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
         "260",
         "260",
         "260",
         "260"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.4 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json

@@ -5,258 +5,95 @@
     "from": "system",
     "setting_id": "GFSB50_07",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
+    "chamber_temperatures": [
-		"0",
+        "60"
-		"0",
-		"0",
-		"0"
     ],
     "filament_cooling_before_tower": [
         "10",
         "10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
         "10",
         "10",
         "10",
         "10"
     ],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"1",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
-	"chamber_temperatures": [
-		"60"
-	],
     "filament_flow_ratio": [
+        "0.95",
+        "0.95",
         "0.95",
         "0.95",
         "0.95",
         "0.95"
     ],
     "filament_max_volumetric_speed": [
+        "12",
+        "12",
         "12",
         "12",
         "12",
         "12"
     ],
     "filament_ramming_travel_time": [
+        "0",
+        "0",
         "0",
         "0",
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "1",
+        "nil",
+        "1",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "260",
+        "260",
         "260",
         "260",
         "260",
         "260"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.6 nozzle",
         "Bambu Lab X2D 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ABS-GF @base.json

@@ -13,7 +13,7 @@
         "30"
     ],
     "filament_cost": [
-		"29.99"
+        "26.99"
     ],
     "filament_density": [
         "1.08"

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json

@@ -71,105 +71,8 @@
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
         "270",

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json

@@ -14,30 +14,41 @@
     "counter_coef_3": [
         "-0.0092"
     ],
-	"counter_limit_max": [
-		"0.2258"
-	],
     "counter_limit_min": [
         "-0.0092"
     ],
-	"filament_change_length": [
+    "counter_limit_max": [
-		"4"
+        "0.2258"
     ],
     "filament_cooling_before_tower": [
+        "10",
         "10",
         "10"
     ],
     "filament_flow_ratio": [
+        "0.96",
         "0.96",
         "0.96"
     ],
     "filament_max_volumetric_speed": [
         "25",
-		"30"
+        "30",
+        "25"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.4",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
     ],
     "filament_prime_volume": [
         "30"
@@ -45,141 +56,67 @@
     "filament_prime_volume_nc": [
         "30"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
     "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
     "filament_ramming_travel_time_nc": [
         "1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4"
-	],
-	"filament_wipe": [
         "1",
         "1"
     ],
-	"filament_wipe_distance": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
     ],
     "filament_change_length_nc": [
         "4"
     ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
     "hole_coef_2": [
         "0.0013"
     ],
     "hole_coef_3": [
         "0.1261"
     ],
-	"hole_limit_max": [
-		"0.1586"
-	],
     "hole_limit_min": [
         "0.1261"
     ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
     "filament_preheat_temperature_delta": [
+        "20",
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
     "slow_down_min_speed": [
+        "20",
         "20",
         "20"
     ],

resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json

@@ -91,85 +91,8 @@
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
         "270",

resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json

@@ -14,30 +14,41 @@
     "counter_coef_3": [
         "-0.0092"
     ],
-	"counter_limit_max": [
-		"0.2258"
-	],
     "counter_limit_min": [
         "-0.0092"
     ],
-	"filament_change_length": [
+    "counter_limit_max": [
-		"4"
+        "0.2258"
     ],
     "filament_cooling_before_tower": [
+        "10",
         "10",
         "10"
     ],
     "filament_flow_ratio": [
+        "0.96",
         "0.96",
         "0.96"
     ],
     "filament_max_volumetric_speed": [
         "20",
-		"30"
+        "30",
+        "20"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "filament_retraction_length": [
-		"230",
+        "0.4",
-		"230"
+        "0.6",
+        "0.4"
+    ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1"
     ],
     "filament_prime_volume": [
         "30"
@@ -45,141 +56,67 @@
     "filament_prime_volume_nc": [
         "30"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_pre_cooling_temperature_nc": [
+        "230",
+        "230",
+        "230"
+    ],
     "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
     "filament_ramming_travel_time_nc": [
         "1",
-		"1"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.6"
-	],
-	"filament_wipe": [
         "1",
         "1"
     ],
-	"filament_wipe_distance": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"first_x_layer_fan_speed": [
-		"0"
     ],
     "filament_change_length_nc": [
         "4"
     ],
+    "first_x_layer_fan_speed": [
+        "0"
+    ],
     "hole_coef_2": [
         "0.0013"
     ],
     "hole_coef_3": [
         "0.1261"
     ],
-	"hole_limit_max": [
-		"0.1586"
-	],
     "hole_limit_min": [
         "0.1261"
     ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
     "filament_preheat_temperature_delta": [
+        "20",
         "20",
         "20"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
-	],
-	"retraction_distances_when_ec": [
-		"10",
-		"10"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
     "slow_down_min_speed": [
+        "20",
         "20",
         "20"
     ],

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json

@@ -8,97 +8,50 @@
     "chamber_temperatures": [
         "65"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_max": [
-		"0",
+        "0.2258"
-		"0"
     ],
-	"filament_flush_volumetric_speed": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
     ],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_prime_volume": [
-		"0",
+        "30"
-		"0"
     ],
-	"long_retractions_when_ec": [
+    "filament_change_length": [
-		"1",
+        "4"
-		"1"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "nozzle_temperature": [
         "270",
@@ -108,13 +61,9 @@
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json

@@ -9,133 +9,87 @@
         "65"
     ],
     "counter_coef_2": [
-		"0.007"
+        "0.0094"
     ],
     "counter_coef_3": [
-		"0.003"
+        "-0.0092"
     ],
     "counter_limit_max": [
-		"0.1"
+        "0.2258"
     ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "filament_change_length": [
-		"0.95",
+        "4"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "20",
-		"35"
+        "35",
+        "20"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
     ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
         "1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hole_coef_2": [
-		"-0.006"
-	],
-	"hole_coef_3": [
-		"0.25"
-	],
-	"hole_limit_min": [
-		"-0.088"
-	],
-	"hole_limit_max": [
-		"0.14"
-	],
-	"long_retractions_when_ec": [
         "1",
         "1"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20"
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json

@@ -8,113 +8,88 @@
     "chamber_temperatures": [
         "65"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_max": [
-		"0",
+        "0.2258"
-		"0"
     ],
-	"filament_flush_volumetric_speed": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
     ],
     "filament_max_volumetric_speed": [
         "25",
-		"35"
+        "35",
+        "25"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
     ],
-	"filament_retract_before_wipe": [
+    "filament_ramming_travel_time": [
-		"nil",
+        "0",
-		"nil"
+        "0",
-	],
+        "0"
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
         "1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
         "1",
         "1"
     ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20",
-	],
+        "20"
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json

@@ -8,62 +8,30 @@
     "chamber_temperatures": [
         "65"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_max": [
-		"0",
+        "0.2258"
-		"0"
     ],
-	"filament_flush_volumetric_speed": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -72,37 +40,38 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_extruder_id": [
         "1",
         "1"
     ],
-	"long_retractions_when_ec": [
+    "filament_prime_volume": [
-		"1",
+        "30"
-		"1"
+    ],
+    "filament_change_length": [
+        "4"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "nozzle_temperature": [
         "270",
@@ -112,13 +81,9 @@
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json

@@ -8,97 +8,20 @@
     "chamber_temperatures": [
         "65"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -108,13 +31,9 @@
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json

@@ -17,62 +17,22 @@
     "counter_limit_max": [
         "0.1"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "20",
         "30"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -81,45 +41,24 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
     "hole_coef_2": [
         "-0.006"
     ],
     "hole_coef_3": [
         "0.25"
     ],
-	"hole_limit_min": [
-		"-0.088"
-	],
     "hole_limit_max": [
         "0.14"
     ],
-	"long_retractions_when_ec": [
+    "hole_limit_min": [
-		"1",
+        "-0.088"
-		"1"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "nozzle_temperature": [
         "270",
@@ -129,13 +68,9 @@
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json

@@ -8,62 +8,22 @@
     "chamber_temperatures": [
         "65"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -72,33 +32,12 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "include": [
-		"Direct Drive Standard",
+        "fdm_filament_template_direct_dual"
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -108,13 +47,9 @@
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json

@@ -8,62 +8,22 @@
     "chamber_temperatures": [
         "65"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -72,33 +32,12 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "include": [
-		"Direct Drive Standard",
+        "fdm_filament_template_direct_dual"
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1"
     ],
     "nozzle_temperature": [
         "270",
@@ -108,13 +47,9 @@
         "270",
         "270"
     ],
-	"retraction_distances_when_ec": [
+    "slow_down_min_speed": [
-		"10",
+        "20",
-		"10"
+        "20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab H2D Pro 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json

@@ -8,93 +8,54 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10"
     ],
     "filament_flush_volumetric_speed": [
         "3",
         "3"
     ],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -118,9 +79,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json

@@ -8,103 +8,86 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
     ],
-	"filament_flush_volumetric_speed": [
+    "counter_limit_max": [
-		"0",
+        "0.2258"
-		"0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
     ],
     "filament_max_volumetric_speed": [
         "25",
-		"35"
+        "35",
+        "25"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
+        "1",
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
         "0",
         "0"
     ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
@@ -115,12 +98,14 @@
         "2"
     ],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json

@@ -8,62 +8,30 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
     ],
-	"filament_flush_volumetric_speed": [
+    "counter_limit_max": [
-		"0",
+        "0.2258"
-		"0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
     ],
     "filament_max_volumetric_speed": [
         "25",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_length": [
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -72,29 +40,34 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
+    "filament_prime_volume": [
-		"nil",
+        "30"
-		"nil"
     ],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "filament_change_length": [
-		"0",
+        "4"
-		"0"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -118,9 +91,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json

@@ -8,103 +8,86 @@
     "chamber_temperatures": [
         "60"
     ],
-	"filament_deretraction_speed": [
+    "counter_coef_2": [
-		"nil",
+        "0.0094"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_coef_3": [
-		"0.95",
+        "-0.0092"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "counter_limit_min": [
-		"0",
+        "-0.0092"
-		"0"
     ],
-	"filament_flush_volumetric_speed": [
+    "counter_limit_max": [
-		"0",
+        "0.2258"
-		"0"
     ],
-	"filament_long_retractions_when_cut": [
+    "filament_change_length": [
-		"nil",
+        "4"
-		"nil"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10"
     ],
     "filament_max_volumetric_speed": [
         "20",
-		"35"
+        "35",
+        "20"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_prime_volume": [
-		"-1",
+        "30"
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
+        "1",
         "1",
         "1"
     ],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_adaptive_volumetric_speed": [
         "0",
         "0"
     ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "include": [
+        "fdm_filament_template_direct_dual_e3d"
+    ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
@@ -115,12 +98,14 @@
         "2"
     ],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20",
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab H2S 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json

@@ -11,11 +11,17 @@
     "chamber_temperatures": [
         "65"
     ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
     ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
     ],
     "fan_max_speed": [
         "60"
@@ -23,66 +29,26 @@
     "fan_min_speed": [
         "30"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
     ],
     "filament_flush_volumetric_speed": [
         "3",
         "3"
     ],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
-	],
     "filament_max_volumetric_speed": [
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
         "10",
         "10"
     ],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
         "1",
         "1"
@@ -91,67 +57,20 @@
         "1",
         "1"
     ],
-	"filament_z_hop": [
+    "hole_coef_2": [
-		"nil",
+        "0.0013"
-		"nil"
     ],
-	"filament_z_hop_types": [
+    "hole_coef_3": [
-		"nil",
+        "0.1261"
-		"nil"
     ],
-	"filament_extruder_variant": [
+    "hole_limit_max": [
-		"Direct Drive Standard",
+        "0.1586"
-		"Direct Drive High Flow"
     ],
-	"filament_pre_cooling_temperature": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -165,23 +84,13 @@
         "270",
         "270"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
         "0",
         "0"
     ],
-	"textured_plate_temp": [
+    "slow_down_min_speed": [
-		"90"
+        "20",
-	],
+        "20"
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json

@@ -11,171 +11,87 @@
     "chamber_temperatures": [
         "65"
     ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
     ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
     ],
-	"filament_deretraction_speed": [
+    "counter_limit_min": [
-		"nil",
+        "-0.0092"
-		"nil"
     ],
-	"filament_flow_ratio": [
+    "counter_limit_max": [
-		"0.95",
+        "0.2258"
-		"0.95"
     ],
-	"filament_flush_temp": [
+    "filament_cooling_before_tower": [
-		"0",
+        "10",
-		"0"
+        "10",
-	],
+        "10"
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "18",
-		"25"
+        "25",
-	],
+        "18"
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
+        "10",
         "10",
         "10"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
+        "Spiral Lift",
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
         "0",
         "0"
     ],
-	"filament_enable_overhang_speed": [
+    "hole_coef_2": [
-		"1",
+        "0.0013"
-		"1"
     ],
-	"filament_overhang_1_4_speed": [
+    "hole_coef_3": [
-		"0",
+        "0.1261"
-		"0"
     ],
-	"filament_overhang_2_4_speed": [
+    "hole_limit_min": [
-		"50",
+        "0.1261"
-		"50"
     ],
-	"filament_overhang_3_4_speed": [
+    "hole_limit_max": [
-		"30",
+        "0.1586"
-		"30"
     ],
-	"filament_overhang_4_4_speed": [
+    "include": [
-		"10",
+        "fdm_filament_template_direct_dual_e3d"
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
     ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
-	"textured_plate_temp": [
+    "slow_down_min_speed": [
-		"90"
+        "20",
-	],
+        "20",
-	"textured_plate_temp_initial_layer": [
+        "20"
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json

@@ -11,174 +11,100 @@
     "chamber_temperatures": [
         "65"
     ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
     ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
     ],
     "fan_min_speed": [
         "25"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10",
-	],
+        "10"
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "18",
-		"35"
+        "35",
-	],
+        "18"
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
+        "10",
         "10",
         "10"
     ],
     "filament_retraction_length": [
+        "0.4",
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
     "filament_wipe": [
+        "1",
         "1",
         "1"
     ],
     "filament_wipe_distance": [
         "1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time": [
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0"
-	],
-	"filament_enable_overhang_speed": [
         "1",
         "1"
     ],
-	"filament_overhang_1_4_speed": [
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
         "0",
         "0"
     ],
-	"filament_overhang_2_4_speed": [
+    "hole_coef_2": [
-		"50",
+        "0.0013"
-		"50"
     ],
-	"filament_overhang_3_4_speed": [
+    "hole_coef_3": [
-		"30",
+        "0.1261"
-		"30"
     ],
-	"filament_overhang_4_4_speed": [
+    "hole_limit_min": [
-		"10",
+        "0.1261"
-		"10"
     ],
-	"filament_overhang_totally_speed": [
+    "hole_limit_max": [
-		"10",
+        "0.1586"
-		"10"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual_e3d"
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
     ],
     "long_retractions_when_ec": [
+        "0",
         "0",
         "0"
     ],
     "nozzle_temperature": [
+        "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
         "270",
         "270"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
+        "0",
         "0",
         "0"
     ],
-	"textured_plate_temp": [
+    "slow_down_min_speed": [
-		"90"
+        "20",
-	],
+        "20",
-	"textured_plate_temp_initial_layer": [
+        "20"
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.6 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json

@@ -8,58 +8,32 @@
     "chamber_temperatures": [
         "65"
     ],
-	"eng_plate_temp": [
+    "counter_coef_2": [
-		"90"
+        "0.0094"
     ],
-	"eng_plate_temp_initial_layer": [
+    "counter_coef_3": [
-		"90"
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
     ],
     "fan_min_speed": [
         "25"
     ],
-	"filament_deretraction_speed": [
+    "filament_cooling_before_tower": [
-		"nil",
+        "10",
-		"nil"
+        "10"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil"
     ],
     "filament_max_volumetric_speed": [
         "18",
         "35"
     ],
-	"filament_ramming_volumetric_speed": [
+    "filament_ramming_travel_time": [
-		"-1",
+        "0",
-		"-1"
+        "0"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
     ],
     "filament_retraction_distances_when_cut": [
         "10",
@@ -69,83 +43,24 @@
         "0.4",
         "0.4"
     ],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
     "filament_z_hop_types": [
         "Spiral Lift",
         "Spiral Lift"
     ],
-	"filament_extruder_variant": [
+    "hole_coef_2": [
-		"Direct Drive Standard",
+        "0.0013"
-		"Direct Drive High Flow"
     ],
-	"filament_pre_cooling_temperature": [
+    "hole_coef_3": [
-		"0",
+        "0.1261"
-		"0"
     ],
-	"filament_pre_cooling_temperature_nc": [
+    "hole_limit_max": [
-		"0",
+        "0.1586"
-		"0"
     ],
-	"filament_ramming_travel_time": [
+    "hole_limit_min": [
-		"0",
+        "0.1261"
-		"0"
     ],
-	"filament_ramming_travel_time_nc": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10"
-	],
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"hot_plate_temp": [
-		"90"
-	],
-	"hot_plate_temp_initial_layer": [
-		"90"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -159,23 +74,13 @@
         "270",
         "270"
     ],
-	"override_process_overhang_speed": [
-		"0",
-		"0"
-	],
     "retraction_distances_when_ec": [
         "0",
         "0"
     ],
-	"textured_plate_temp": [
+    "slow_down_min_speed": [
-		"90"
+        "20",
-	],
+        "20"
-	"textured_plate_temp_initial_layer": [
-		"90"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
     ],
     "compatible_printers": [
         "Bambu Lab P2S 0.8 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json

@@ -17,81 +17,12 @@
         "18",
         "18"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -109,9 +40,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json

@@ -12,6 +12,10 @@
         "1",
         "1"
     ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "18"
+    ],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
@@ -20,81 +24,12 @@
         "0.4",
         "0.4"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -112,13 +47,13 @@
         "0",
         "0"
     ],
+    "slow_down_min_speed": [
+        "20",
+        "20"
+    ],
     "textured_plate_temp_initial_layer": [
         "V"
     ],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "compatible_printers": [
         "Bambu Lab X1 0.6 nozzle"
     ]

resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json

@@ -17,81 +17,12 @@
         "18",
         "18"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -109,9 +40,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.2 nozzle",

resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json

@@ -12,89 +12,28 @@
         "1",
         "1"
     ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "25"
+    ],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_length": [
         "nil",
-		"nil"
+        "0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
     ],
     "filament_z_hop": [
         "nil",
-		"nil"
+        "0.6"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -112,15 +51,15 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.4 nozzle",
-		"Bambu Lab P1S 0.4 nozzle",
         "Bambu Lab X1 0.4 nozzle",
-		"Bambu Lab P1P 0.4 nozzle",
+        "Bambu Lab P1P 0.8 nozzle",
-		"Bambu Lab P1P 0.8 nozzle"
+        "Bambu Lab P1S 0.4 nozzle",
+        "Bambu Lab P1P 0.4 nozzle"
     ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json

@@ -12,89 +12,28 @@
         "1",
         "1"
     ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "25"
+    ],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_max_volumetric_speed": [
-		"18",
-		"18"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_length": [
         "nil",
-		"nil"
+        "0.4"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
     ],
     "filament_z_hop": [
         "nil",
-		"nil"
+        "0.6"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
     ],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -112,16 +51,16 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1 Carbon 0.6 nozzle",
         "Bambu Lab X1 Carbon 0.8 nozzle",
         "Bambu Lab X1 0.8 nozzle",
-		"Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab P1S 0.8 nozzle",
+        "Bambu Lab P1S 0.6 nozzle",
         "Bambu Lab P1P 0.6 nozzle"
     ]
 }

resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json

@@ -5,22 +5,6 @@
     "from": "system",
     "setting_id": "GFSB01_06",
     "instantiation": "true",
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_long_retractions_when_cut": [
         "1",
         "1"
@@ -29,69 +13,16 @@
         "2",
         "2"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -109,9 +40,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1E 0.2 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json

@@ -5,22 +5,6 @@
     "from": "system",
     "setting_id": "GFSB01_07",
     "instantiation": "true",
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_long_retractions_when_cut": [
         "1",
         "1"
@@ -29,69 +13,16 @@
         "18",
         "18"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -109,9 +40,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1E 0.4 nozzle"

resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json

@@ -8,22 +8,6 @@
     "fan_min_speed": [
         "25"
     ],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_flow_ratio": [
-		"0.95",
-		"0.95"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0"
-	],
     "filament_long_retractions_when_cut": [
         "1",
         "1"
@@ -32,69 +16,16 @@
         "18",
         "18"
     ],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil"
-	],
     "filament_retraction_distances_when_cut": [
         "18",
         "18"
     ],
-	"filament_retraction_length": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"nil",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"nil",
-		"nil"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0"
-	],
     "filament_ramming_travel_time": [
         "0",
         "0"
     ],
-	"filament_adaptive_volumetric_speed": [
+    "include": [
-		"0",
+        "fdm_filament_template_direct_dual"
-		"0"
     ],
     "long_retractions_when_ec": [
         "0",
@@ -112,9 +43,9 @@
         "0",
         "0"
     ],
-	"volumetric_speed_coefficients": [
+    "slow_down_min_speed": [
-		"0 0 0 0 0 0",
+        "20",
-		"0 0 0 0 0 0"
+        "20"
     ],
     "compatible_printers": [
         "Bambu Lab X1E 0.6 nozzle",

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB01_21",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"3",
-		"3",
-		"3",
-		"3"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -236,6 +20,12 @@
     "counter_limit_min": [
         "-0.0092"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
@@ -245,6 +35,12 @@
         "0.95",
         "0.95"
     ],
+    "filament_flush_volumetric_speed": [
+        "3",
+        "3",
+        "3",
+        "3"
+    ],
     "filament_max_volumetric_speed": [
         "2",
         "2",
@@ -257,9 +53,33 @@
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
     "hole_coef_2": [
         "0.0013"
     ],
@@ -272,6 +92,9 @@
     "hole_limit_min": [
         "0.1261"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
     "nozzle_temperature": [
         "270",
         "270",
@@ -284,6 +107,18 @@
         "270",
         "270"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.2 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB01_22",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"0.4",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift",
-		"Spiral Lift"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -236,10 +20,20 @@
     "counter_limit_min": [
         "-0.0092"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
     "filament_flow_ratio": [
+        "0.95",
+        "0.95",
         "0.95",
         "0.95",
         "0.95",
@@ -249,17 +43,61 @@
         "18",
         "25",
         "18",
-		"20"
+        "18",
+        "20",
+        "18"
     ],
     "filament_ramming_travel_time": [
+        "0",
+        "0",
         "0",
         "0",
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "0.4",
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "1",
+        "1",
+        "1",
+        "1",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift",
+        "Spiral Lift"
+    ],
     "hole_coef_2": [
         "0.0013"
     ],
@@ -272,18 +110,44 @@
     "hole_limit_min": [
         "0.1261"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ],
     "compatible_printers": [
         "Bambu Lab X2D 0.4 nozzle"
     ],

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,149 @@
+{
+    "type": "filament",
+    "name": "Bambu ASA @BBL X2D 0.8 nozzle",
+    "inherits": "Bambu ASA @base",
+    "from": "system",
+    "setting_id": "GFSB01_50",
+    "instantiation": "true",
+    "chamber_temperatures": [
+        "65"
+    ],
+    "counter_coef_2": [
+        "0.0094"
+    ],
+    "counter_coef_3": [
+        "-0.0092"
+    ],
+    "counter_limit_max": [
+        "0.2258"
+    ],
+    "counter_limit_min": [
+        "-0.0092"
+    ],
+    "fan_min_speed": [
+        "25"
+    ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_dev_ams_drying_temperature": [
+        "65",
+        "80",
+        "65",
+        "80"
+    ],
+    "filament_dev_ams_drying_time": [
+        "12",
+        "8.0",
+        "12",
+        "8.0"
+    ],
+    "filament_extruder_compatibility": [
+        "24"
+    ],
+    "filament_flow_ratio": [
+        "0.95",
+        "0.95",
+        "0.95",
+        "0.95"
+    ],
+    "filament_flush_temp_fast": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_max_volumetric_speed": [
+        "18",
+        "35",
+        "18",
+        "18"
+    ],
+    "filament_ramming_travel_time": [
+        "0",
+        "0",
+        "0",
+        "0"
+    ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
+    "filament_tower_interface_print_temp": [
+        "270"
+    ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "nil"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "nil"
+    ],
+    "hole_coef_2": [
+        "0.0013"
+    ],
+    "hole_coef_3": [
+        "0.1261"
+    ],
+    "hole_limit_max": [
+        "0.1586"
+    ],
+    "hole_limit_min": [
+        "0.1261"
+    ],
+    "include": [
+        "fdm_filament_template_direct_bowden"
+    ],
+    "nozzle_temperature": [
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
+        "270",
+        "270"
+    ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
+    "compatible_printers": [
+        "Bambu Lab X2D 0.8 nozzle"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\n"
+    ]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json

@@ -5,222 +5,6 @@
     "from": "system",
     "setting_id": "GFSB01_20",
     "instantiation": "true",
-	"filament_adaptive_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_cooling_before_tower": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_deretraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_enable_overhang_speed": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"filament_extruder_variant": [
-		"Direct Drive Standard",
-		"Direct Drive High Flow",
-		"Bowden Standard",
-		"Bowden High Flow"
-	],
-	"filament_flush_temp": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_flush_volumetric_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_long_retractions_when_cut": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_overhang_1_4_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_overhang_2_4_speed": [
-		"50",
-		"50",
-		"50",
-		"50"
-	],
-	"filament_overhang_3_4_speed": [
-		"30",
-		"30",
-		"30",
-		"30"
-	],
-	"filament_overhang_4_4_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_overhang_totally_speed": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_bridge_speed": [
-		"25",
-		"25",
-		"25",
-		"25"
-	],
-	"filament_pre_cooling_temperature": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_pre_cooling_temperature_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_ramming_travel_time_nc": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"filament_retract_length_nc": [
-		"14",
-		"14",
-		"14",
-		"14"
-	],
-	"filament_ramming_volumetric_speed": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_ramming_volumetric_speed_nc": [
-		"-1",
-		"-1",
-		"-1",
-		"-1"
-	],
-	"filament_retract_before_wipe": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_restart_extra": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retract_when_changing_layer": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_distances_when_cut": [
-		"10",
-		"10",
-		"10",
-		"10"
-	],
-	"filament_retraction_length": [
-		"0.4",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_minimum_travel": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_retraction_speed": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_wipe": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_wipe_distance": [
-		"1",
-		"nil",
-		"1",
-		"nil"
-	],
-	"filament_z_hop": [
-		"nil",
-		"nil",
-		"nil",
-		"nil"
-	],
-	"filament_z_hop_types": [
-		"Spiral Lift",
-		"nil",
-		"Spiral Lift",
-		"nil"
-	],
-	"long_retractions_when_ec": [
-		"1",
-		"1",
-		"1",
-		"1"
-	],
-	"override_process_overhang_speed": [
-		"0",
-		"0",
-		"0",
-		"0"
-	],
-	"retraction_distances_when_ec": [
-		"3",
-		"3",
-		"4",
-		"4"
-	],
-	"slow_down_min_speed": [
-		"20",
-		"20",
-		"20",
-		"20"
-	],
-	"volumetric_speed_coefficients": [
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0",
-		"0 0 0 0 0 0"
-	],
     "chamber_temperatures": [
         "65"
     ],
@@ -239,10 +23,20 @@
     "fan_min_speed": [
         "25"
     ],
+    "filament_cooling_before_tower": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
     "filament_extruder_compatibility": [
         "24"
     ],
     "filament_flow_ratio": [
+        "0.95",
+        "0.95",
         "0.95",
         "0.95",
         "0.95",
@@ -252,17 +46,61 @@
         "18",
         "35",
         "18",
+        "18",
+        "18",
         "18"
     ],
     "filament_ramming_travel_time": [
+        "0",
+        "0",
         "0",
         "0",
         "0",
         "0"
     ],
+    "filament_retraction_distances_when_cut": [
+        "10",
+        "10",
+        "10",
+        "10",
+        "10",
+        "10"
+    ],
+    "filament_retraction_length": [
+        "0.4",
+        "nil",
+        "0.4",
+        "nil",
+        "nil",
+        "nil"
+    ],
     "filament_tower_interface_print_temp": [
         "270"
     ],
+    "filament_wipe": [
+        "1",
+        "nil",
+        "1",
+        "1",
+        "nil",
+        "1"
+    ],
+    "filament_wipe_distance": [
+        "1",
+        "nil",
+        "1",
+        "1",
+        "nil",
+        "1"
+    ],
+    "filament_z_hop_types": [
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift",
+        "Spiral Lift",
+        "nil",
+        "Spiral Lift"
+    ],
     "hole_coef_2": [
         "0.0013"
     ],
@@ -275,21 +113,43 @@
     "hole_limit_min": [
         "0.1261"
     ],
+    "include": [
+        "fdm_filament_template_direct_bowden_e3d"
+    ],
     "nozzle_temperature": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
     "nozzle_temperature_initial_layer": [
+        "270",
+        "270",
         "270",
         "270",
         "270",
         "270"
     ],
+    "retraction_distances_when_ec": [
+        "3",
+        "3",
+        "3",
+        "4",
+        "4",
+        "4"
+    ],
+    "slow_down_min_speed": [
+        "20",
+        "20",
+        "20",
+        "20",
+        "20",
+        "20"
+    ],
     "compatible_printers": [
-		"Bambu Lab X2D 0.6 nozzle",
+        "Bambu Lab X2D 0.6 nozzle"
-		"Bambu Lab X2D 0.8 nozzle"
     ],
     "filament_start_gcode": [
         "; filament start gcode\n"