juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-14 09:02:06 +00:00
Code Issues Packages Projects Releases Wiki Activity

Wiki Update 7 (#10007)

Browse Source 
* Large images optimizations

* Add image and update instructions for junction deviation

Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.

* Update README links to Wiki

* Fix Wiki image paths + Typos

* Fixes, typos and Infill improvements

* Update VFA calibration guide and add resonance avoidance

Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.

* Add surface density setting to top/bottom shells docs

* Ironing Wiki Wip

* Wall and surfaces wiki wip

* Fix top/bottom link

* Better topbottom reddirect

* bridging wiki wip

* Fix TOP bottom

* Wall wiki wip

* strength advanced wiki wip

* speed advance renaming

* inital speed wiki wip

* Other Layer Speed Wiki Wip...

* Speed overhang Wiki WIP

* Travel speed wiki wip

* Speed acceleration wiki wip

* Update speed_settings_initial_layer_speed.md

* Jerk Wiki Wip

* support wiki wip

* Raft wiki wip

* support filamnet wiki wip

* Support ironing wiki wip

* Support advanced Wiki Wip

* Tree wiki wip

* STL images optimizations

* Prime tower wiki wip

* Update PA line diagram images

Were bigger than original used to crop this ones.

* Ooze wiki wip

* Flush wiki wip

* Image optimizatios

* Clarify TPMS-D infill description

Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* images+++

* Multimaterial advanced Wiki Wip

* Skirt Wiki Wip

* Brim wiki wip

* Add Junction Deviation formula to documentation

Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Others special mode Wiki Wip

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Fix links

* Fill Multiline infill Wiki

Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.

* Multiline infill wiki update

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Multiline Tab.cpp

* Gcode output Wiki Wip

* Others wiki wips

* Home quality

* Add process links in home

* Quality Basic Missing descriptions

* Update quality_settings_bridging.md

* basic desc

* basic advance strentgth

* Basic speed

* basic other speeds

* Fix link

* Update speed_settings_overhang_speed.md

* Update speed_settings_travel.md

* Update speed_settings_acceleration.md

* Fix

* Expand documentation for acceleration and jerk settings

* Support wiki

* Raft wiki

* Support wiki desc

* Prime tower wiki

* Multimaterial wiki desc

* Filament to features wiki

* Ooze improve

* Fix duplicate text

* Fix typo in volumetric speed calibration guide

Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.

* centeres image

* Overlapping gif

* Others wiki basic desc

* Clarify retraction calibration recommendation

Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Links in Readme + minor change

Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.

* Add SVG icons to infill pattern comparison table

* Delete doc/images/gui directory

remplaced with GUI

* Create process-preset-full.png

---------

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>
This commit is contained in:
Ian Bassi
2025-07-07 21:53:53 -03:00
committed by GitHub
parent b785f40fb0
commit eba08bf727
94 changed files with 1618 additions and 382 deletions
Download Patch File Download Diff File Expand all files Collapse all files

438
src/slic3r/GUI/Tab.cpp
View File

@@ -2115,8 +2115,8 @@ void TabPrint::build()
optgroup = page->new_optgroup(L("Precision"), L"param_precision");
optgroup->append_single_option_line("slice_closing_radius");
optgroup->append_single_option_line("resolution");
optgroup->append_single_option_line("slice_closing_radius", "quality_settings_precision#slice-gap-closing-radius");
optgroup->append_single_option_line("resolution", "quality_settings_precision#resolution");
optgroup->append_single_option_line("enable_arc_fitting", "quality_settings_precision#arc-fitting");
optgroup->append_single_option_line("xy_hole_compensation", "quality_settings_precision#xy-compensation");
optgroup->append_single_option_line("xy_contour_compensation", "quality_settings_precision#xy-compensation");
@@ -2124,17 +2124,17 @@ void TabPrint::build()
optgroup->append_single_option_line("elefant_foot_compensation_layers", "quality_settings_precision#elefant-foot-compensation");
optgroup->append_single_option_line("precise_outer_wall", "quality_settings_precision#precise-wall");
optgroup->append_single_option_line("precise_z_height", "quality_settings_precision#precise-z-height");
optgroup->append_single_option_line("hole_to_polyhole");
optgroup->append_single_option_line("hole_to_polyhole_threshold");
optgroup->append_single_option_line("hole_to_polyhole_twisted");
optgroup->append_single_option_line("hole_to_polyhole", "quality_settings_precision#polyholes");
optgroup->append_single_option_line("hole_to_polyhole_threshold", "quality_settings_precision#polyholes");
optgroup->append_single_option_line("hole_to_polyhole_twisted", "quality_settings_precision#polyholes");
optgroup = page->new_optgroup(L("Ironing"), L"param_ironing");
optgroup->append_single_option_line("ironing_type", "parameter/ironing");
optgroup->append_single_option_line("ironing_pattern");
optgroup->append_single_option_line("ironing_flow");
optgroup->append_single_option_line("ironing_spacing");
optgroup->append_single_option_line("ironing_inset");
optgroup->append_single_option_line("ironing_angle");
optgroup->append_single_option_line("ironing_type", "quality_settings_ironing#type");
optgroup->append_single_option_line("ironing_pattern", "quality_settings_ironing#pattern");
optgroup->append_single_option_line("ironing_flow", "quality_settings_ironing#flow");
optgroup->append_single_option_line("ironing_spacing", "quality_settings_ironing#spacing");
optgroup->append_single_option_line("ironing_inset", "quality_settings_ironing#inset");
optgroup->append_single_option_line("ironing_angle", "quality_settings_ironing#angle");
optgroup = page->new_optgroup(L("Wall generator"), L"param_wall_generator");
optgroup->append_single_option_line("wall_generator", "quality_settings_wall_generator");
@@ -2148,35 +2148,35 @@ void TabPrint::build()
optgroup->append_single_option_line("min_length_factor", "quality_settings_wall_generator#arachne");
optgroup = page->new_optgroup(L("Walls and surfaces"), L"param_wall_surface");
optgroup->append_single_option_line("wall_sequence");
optgroup->append_single_option_line("is_infill_first");
optgroup->append_single_option_line("wall_direction");
optgroup->append_single_option_line("print_flow_ratio");
optgroup->append_single_option_line("top_solid_infill_flow_ratio");
optgroup->append_single_option_line("bottom_solid_infill_flow_ratio");
optgroup->append_single_option_line("only_one_wall_top");
optgroup->append_single_option_line("min_width_top_surface");
optgroup->append_single_option_line("only_one_wall_first_layer");
optgroup->append_single_option_line("reduce_crossing_wall");
optgroup->append_single_option_line("max_travel_detour_distance");
optgroup->append_single_option_line("wall_sequence", "quality_settings_wall_and_surfaces#walls-printing-order");
optgroup->append_single_option_line("is_infill_first", "quality_settings_wall_and_surfaces#print-infill-first");
optgroup->append_single_option_line("wall_direction", "quality_settings_wall_and_surfaces#wall-loop-direction");
optgroup->append_single_option_line("print_flow_ratio", "quality_settings_wall_and_surfaces#surface-flow-ratio");
optgroup->append_single_option_line("top_solid_infill_flow_ratio", "quality_settings_wall_and_surfaces#surface-flow-ratio");
optgroup->append_single_option_line("bottom_solid_infill_flow_ratio", "quality_settings_wall_and_surfaces#surface-flow-ratio");
optgroup->append_single_option_line("only_one_wall_top", "quality_settings_wall_and_surfaces#only-one-wall");
optgroup->append_single_option_line("min_width_top_surface", "quality_settings_wall_and_surfaces#threshold");
optgroup->append_single_option_line("only_one_wall_first_layer", "quality_settings_wall_and_surfaces#only-one-wall");
optgroup->append_single_option_line("reduce_crossing_wall", "quality_settings_wall_and_surfaces#avoid-crossing-walls");
optgroup->append_single_option_line("max_travel_detour_distance", "quality_settings_wall_and_surfaces#max-detour-length");
optgroup->append_single_option_line("small_area_infill_flow_compensation", "small-area-infill-flow-compensation");
optgroup->append_single_option_line("small_area_infill_flow_compensation", "quality_settings_wall_and_surfaces#small-area-flow-compensation");
Option option = optgroup->get_option("small_area_infill_flow_compensation_model");
option.opt.full_width = true;
option.opt.is_code = true;
option.opt.height = 15;
optgroup->append_single_option_line(option, "small-area-infill-flow-compensation");
optgroup->append_single_option_line(option, "quality_settings_wall_and_surfaces#small-area-flow-compensation");
optgroup = page->new_optgroup(L("Bridging"), L"param_bridge");
optgroup->append_single_option_line("bridge_flow");
optgroup->append_single_option_line("internal_bridge_flow");
optgroup->append_single_option_line("bridge_density");
optgroup->append_single_option_line("internal_bridge_density");
optgroup->append_single_option_line("thick_bridges");
optgroup->append_single_option_line("thick_internal_bridges");
optgroup->append_single_option_line("enable_extra_bridge_layer");
optgroup->append_single_option_line("dont_filter_internal_bridges");
optgroup->append_single_option_line("counterbore_hole_bridging");
optgroup->append_single_option_line("bridge_flow", "quality_settings_bridging#flow-ratio");
optgroup->append_single_option_line("internal_bridge_flow", "quality_settings_bridging#flow-ratio");
optgroup->append_single_option_line("bridge_density", "quality_settings_bridging#bridge-density");
optgroup->append_single_option_line("internal_bridge_density", "quality_settings_bridging#bridge-density");
optgroup->append_single_option_line("thick_bridges", "quality_settings_bridging#thick-bridges");
optgroup->append_single_option_line("thick_internal_bridges", "quality_settings_bridging#thick-bridges");
optgroup->append_single_option_line("enable_extra_bridge_layer", "quality_settings_bridging#extra-bridge-layers");
optgroup->append_single_option_line("dont_filter_internal_bridges", "quality_settings_bridging#filter-out-small-internal-bridges");
optgroup->append_single_option_line("counterbore_hole_bridging", "quality_settings_bridging#bridge-counterbore-hole");
optgroup = page->new_optgroup(L("Overhangs"), L"param_overhang");
optgroup->append_single_option_line("detect_overhang_wall");
@@ -2190,24 +2190,24 @@ void TabPrint::build()
page = add_options_page(L("Strength"), "custom-gcode_strength"); // ORCA: icon only visible on placeholders
optgroup = page->new_optgroup(L("Walls"), L"param_wall");
optgroup->append_single_option_line("wall_loops");
optgroup->append_single_option_line("alternate_extra_wall");
optgroup->append_single_option_line("detect_thin_wall");
optgroup->append_single_option_line("wall_loops", "strength_settings_walls#wall-loop");
optgroup->append_single_option_line("alternate_extra_wall", "strength_settings_walls#alternate-extra-wall");
optgroup->append_single_option_line("detect_thin_wall", "strength_settings_walls#detect-thin-wall");
optgroup = page->new_optgroup(L("Top/bottom shells"), L"param_shell");
optgroup->append_single_option_line("top_shell_layers", "strength_top-bottom_shells");
optgroup->append_single_option_line("top_shell_thickness", "strength_top-bottom_shells");
optgroup->append_single_option_line("top_surface_density", "strength_top-bottom_shells");
optgroup->append_single_option_line("top_surface_pattern", "strength_top-bottom_shells");
optgroup->append_single_option_line("bottom_shell_layers", "strength_top-bottom_shells");
optgroup->append_single_option_line("bottom_shell_thickness", "strength_top-bottom_shells");
optgroup->append_single_option_line("bottom_surface_density", "strength_top-bottom_shells");
optgroup->append_single_option_line("bottom_surface_pattern", "strength_top-bottom_shells");
optgroup->append_single_option_line("top_bottom_infill_wall_overlap", "strength_top-bottom_shells");
optgroup->append_single_option_line("top_shell_layers", "strength_settings_top_bottom_shells#shells-layers");
optgroup->append_single_option_line("top_shell_thickness", "strength_settings_top_bottom_shells#shell-thickness");
optgroup->append_single_option_line("top_surface_density", "strength_settings_top_bottom_shells#surface-density");
optgroup->append_single_option_line("top_surface_pattern", "strength_settings_top_bottom_shells#surface-pattern");
optgroup->append_single_option_line("bottom_shell_layers", "strength_settings_top_bottom_shells#shells-layers");
optgroup->append_single_option_line("bottom_shell_thickness", "strength_settings_top_bottom_shells#shell-thickness");
optgroup->append_single_option_line("bottom_surface_density", "strength_settings_top_bottom_shells#surface-density");
optgroup->append_single_option_line("bottom_surface_pattern", "strength_settings_top_bottom_shells#surface-pattern");
optgroup->append_single_option_line("top_bottom_infill_wall_overlap", "strength_settings_top_bottom_shells#infillwall-overlap");
optgroup = page->new_optgroup(L("Infill"), L"param_infill");
optgroup->append_single_option_line("sparse_infill_density", "strength_settings_infill#sparse-infill-density");
optgroup->append_single_option_line("fill_multiline"); // fill multiline
optgroup->append_single_option_line("fill_multiline", "strength_settings_infill##fill-multiline");
optgroup->append_single_option_line("sparse_infill_pattern", "strength_settings_infill#sparse-infill-pattern");
optgroup->append_single_option_line("infill_direction", "strength_settings_infill#direction");
optgroup->append_single_option_line("sparse_infill_rotate_template", "strength_settings_infill#rotation");
@@ -2233,36 +2233,36 @@ void TabPrint::build()
optgroup->append_single_option_line("infill_wall_overlap", "strength_settings_infill#infill-wall-overlap");
optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
optgroup->append_single_option_line("bridge_angle");
optgroup->append_single_option_line("internal_bridge_angle"); // ORCA: Internal bridge angle override
optgroup->append_single_option_line("minimum_sparse_infill_area");
optgroup->append_single_option_line("infill_combination");
optgroup->append_single_option_line("infill_combination_max_layer_height");
optgroup->append_single_option_line("detect_narrow_internal_solid_infill");
optgroup->append_single_option_line("ensure_vertical_shell_thickness");
optgroup->append_single_option_line("bridge_angle", "strength_settings_advanced#bridge-infill-direction");
optgroup->append_single_option_line("internal_bridge_angle", "strength_settings_advanced#bridge-infill-direction"); // ORCA: Internal bridge angle override
optgroup->append_single_option_line("minimum_sparse_infill_area", "strength_settings_advanced#minimum-sparse-infill-threshold");
optgroup->append_single_option_line("infill_combination", "strength_settings_advanced#infill-combination");
optgroup->append_single_option_line("infill_combination_max_layer_height", "strength_settings_advanced#max-layer-height");
optgroup->append_single_option_line("detect_narrow_internal_solid_infill", "strength_settings_advanced#detect-narrow-internal-solid-infill");
optgroup->append_single_option_line("ensure_vertical_shell_thickness", "strength_settings_advanced#ensure-vertical-shell-thickness");
page = add_options_page(L("Speed"), "custom-gcode_speed"); // ORCA: icon only visible on placeholders
optgroup = page->new_optgroup(L("Initial layer speed"), L"param_speed_first", 15);
optgroup->append_single_option_line("initial_layer_speed");
optgroup->append_single_option_line("initial_layer_infill_speed");
optgroup->append_single_option_line("initial_layer_travel_speed");
optgroup->append_single_option_line("slow_down_layers");
optgroup->append_single_option_line("initial_layer_speed", "speed_settings_initial_layer_speed#initial-layer");
optgroup->append_single_option_line("initial_layer_infill_speed", "speed_settings_initial_layer_speed#initial-layer-infill");
optgroup->append_single_option_line("initial_layer_travel_speed", "speed_settings_initial_layer_speed#initial-layer-travel-speed");
optgroup->append_single_option_line("slow_down_layers", "speed_settings_initial_layer_speed#number-of-slow-layers");
optgroup = page->new_optgroup(L("Other layers speed"), L"param_speed", 15);
optgroup->append_single_option_line("outer_wall_speed");
optgroup->append_single_option_line("inner_wall_speed");
optgroup->append_single_option_line("small_perimeter_speed");
optgroup->append_single_option_line("small_perimeter_threshold");
optgroup->append_single_option_line("sparse_infill_speed");
optgroup->append_single_option_line("internal_solid_infill_speed");
optgroup->append_single_option_line("top_surface_speed");
optgroup->append_single_option_line("gap_infill_speed");
optgroup->append_single_option_line("ironing_speed");
optgroup->append_single_option_line("support_speed");
optgroup->append_single_option_line("support_interface_speed");
optgroup->append_single_option_line("outer_wall_speed", "speed_settings_other_layers_speed#outer-wall");
optgroup->append_single_option_line("inner_wall_speed", "speed_settings_other_layers_speed#inner-wall");
optgroup->append_single_option_line("small_perimeter_speed", "speed_settings_other_layers_speed#small-perimeters");
optgroup->append_single_option_line("small_perimeter_threshold", "speed_settings_other_layers_speed#small-perimeters-threshold");
optgroup->append_single_option_line("sparse_infill_speed", "speed_settings_other_layers_speed#sparse-infill");
optgroup->append_single_option_line("internal_solid_infill_speed", "speed_settings_other_layers_speed#internal-solid-infill");
optgroup->append_single_option_line("top_surface_speed", "speed_settings_other_layers_speed#top-surface");
optgroup->append_single_option_line("gap_infill_speed", "speed_settings_other_layers_speed#gap-infill");
optgroup->append_single_option_line("ironing_speed", "speed_settings_other_layers_speed#ironing-speed");
optgroup->append_single_option_line("support_speed", "speed_settings_other_layers_speed#support");
optgroup->append_single_option_line("support_interface_speed", "speed_settings_other_layers_speed#support-interface");
optgroup = page->new_optgroup(L("Overhang speed"), L"param_overhang_speed", 15);
optgroup->append_single_option_line("enable_overhang_speed", "slow-down-for-overhang");
optgroup->append_single_option_line("enable_overhang_speed", "speed_settings_overhang_speed#slow-down-for-overhang");
optgroup->append_single_option_line("slowdown_for_curled_perimeters");
optgroup->append_single_option_line("slowdown_for_curled_perimeters", "speed_settings_overhang_speed#slow-down-for-curled-perimeters");
Line line = { L("Overhang speed"), L("This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used") };
line.label_path = "slow-down-for-overhang";
line.append_option(optgroup->get_option("overhang_1_4_speed"));
@@ -2277,215 +2277,215 @@ void TabPrint::build()
optgroup->append_line(line);
optgroup = page->new_optgroup(L("Travel speed"), L"param_travel_speed", 15);
optgroup->append_single_option_line("travel_speed");
optgroup->append_single_option_line("travel_speed", "speed_settings_travel");
optgroup = page->new_optgroup(L("Acceleration"), L"param_acceleration", 15);
optgroup->append_single_option_line("default_acceleration");
optgroup->append_single_option_line("outer_wall_acceleration");
optgroup->append_single_option_line("inner_wall_acceleration");
optgroup->append_single_option_line("bridge_acceleration");
optgroup->append_single_option_line("sparse_infill_acceleration");
optgroup->append_single_option_line("internal_solid_infill_acceleration");
optgroup->append_single_option_line("initial_layer_acceleration");
optgroup->append_single_option_line("top_surface_acceleration");
optgroup->append_single_option_line("travel_acceleration");
optgroup->append_single_option_line("accel_to_decel_enable");
optgroup->append_single_option_line("accel_to_decel_factor");
optgroup->append_single_option_line("default_acceleration", "speed_settings_acceleration#normal-printing");
optgroup->append_single_option_line("outer_wall_acceleration", "speed_settings_acceleration#outer-wall");
optgroup->append_single_option_line("inner_wall_acceleration", "speed_settings_acceleration#inner-wall");
optgroup->append_single_option_line("bridge_acceleration", "speed_settings_acceleration#bridge");
optgroup->append_single_option_line("sparse_infill_acceleration", "speed_settings_acceleration#sparse-infill");
optgroup->append_single_option_line("internal_solid_infill_acceleration", "speed_settings_acceleration#internal-solid-infill");
optgroup->append_single_option_line("initial_layer_acceleration", "speed_settings_acceleration#initial-layer");
optgroup->append_single_option_line("top_surface_acceleration", "speed_settings_acceleration#top-surface");
optgroup->append_single_option_line("travel_acceleration", "speed_settings_acceleration#travel");
optgroup->append_single_option_line("accel_to_decel_enable", "speed_settings_acceleration");
optgroup->append_single_option_line("accel_to_decel_factor", "speed_settings_acceleration");
optgroup = page->new_optgroup(L("Jerk(XY)"), L"param_jerk", 15);
optgroup->append_single_option_line("default_jerk");
optgroup->append_single_option_line("outer_wall_jerk");
optgroup->append_single_option_line("inner_wall_jerk");
optgroup->append_single_option_line("infill_jerk");
optgroup->append_single_option_line("top_surface_jerk");
optgroup->append_single_option_line("initial_layer_jerk");
optgroup->append_single_option_line("travel_jerk");
optgroup->append_single_option_line("default_junction_deviation");
optgroup->append_single_option_line("default_jerk", "speed_settings_jerk_xy#default");
optgroup->append_single_option_line("outer_wall_jerk", "speed_settings_jerk_xy#outer-wall");
optgroup->append_single_option_line("inner_wall_jerk", "speed_settings_jerk_xy#inner-wall");
optgroup->append_single_option_line("infill_jerk", "speed_settings_jerk_xy#infill");
optgroup->append_single_option_line("top_surface_jerk", "speed_settings_jerk_xy#top-surface");
optgroup->append_single_option_line("initial_layer_jerk", "speed_settings_jerk_xy#initial-layer");
optgroup->append_single_option_line("travel_jerk", "speed_settings_jerk_xy#travel");
optgroup->append_single_option_line("default_junction_deviation", "speed_settings_jerk_xy#junction-deviation");
optgroup = page->new_optgroup(L("Advanced"), L"param_advanced", 15);
optgroup->append_single_option_line("max_volumetric_extrusion_rate_slope", "speed_settings_extrusion_rate_smoothing");
optgroup->append_single_option_line("max_volumetric_extrusion_rate_slope_segment_length", "speed_settings_extrusion_rate_smoothing");
optgroup->append_single_option_line("extrusion_rate_smoothing_external_perimeter_only", "speed_settings_extrusion_rate_smoothing");
optgroup->append_single_option_line("max_volumetric_extrusion_rate_slope", "speed_settings_advanced");
optgroup->append_single_option_line("max_volumetric_extrusion_rate_slope_segment_length", "speed_settings_advanced");
optgroup->append_single_option_line("extrusion_rate_smoothing_external_perimeter_only", "speed_settings_advanced");
page = add_options_page(L("Support"), "custom-gcode_support"); // ORCA: icon only visible on placeholders
optgroup = page->new_optgroup(L("Support"), L"param_support");
optgroup->append_single_option_line("enable_support", "support");
optgroup->append_single_option_line("support_type", "support#support-types");
optgroup->append_single_option_line("support_style", "support#support-styles");
optgroup->append_single_option_line("support_threshold_angle", "support#threshold-angle");
optgroup->append_single_option_line("support_threshold_overlap", "support#threshold-angle");
optgroup->append_single_option_line("raft_first_layer_density");
optgroup->append_single_option_line("raft_first_layer_expansion");
optgroup->append_single_option_line("support_on_build_plate_only");
optgroup->append_single_option_line("support_critical_regions_only");
optgroup->append_single_option_line("support_remove_small_overhang");
//optgroup->append_single_option_line("enforce_support_layers");
optgroup->append_single_option_line("enable_support", "support_settings_support");
optgroup->append_single_option_line("support_type", "support_settings_support#type");
optgroup->append_single_option_line("support_style", "support_settings_support#style");
optgroup->append_single_option_line("support_threshold_angle", "support_settings_support#threshold-angle");
optgroup->append_single_option_line("support_threshold_overlap", "support_settings_support#threshold-overlap");
optgroup->append_single_option_line("raft_first_layer_density", "support_settings_support#initial-layer-density");
optgroup->append_single_option_line("raft_first_layer_expansion", "support_settings_support#initial-layer-expansion");
optgroup->append_single_option_line("support_on_build_plate_only", "support_settings_support#on-build-plate-only");
optgroup->append_single_option_line("support_critical_regions_only", "support_settings_support#support-critical-regions-only");
optgroup->append_single_option_line("support_remove_small_overhang", "support_settings_support#remove-small-overhangs");
//optgroup->append_single_option_line("enforce_support_layers", "support_settings_support");
optgroup = page->new_optgroup(L("Raft"), L"param_raft");
optgroup->append_single_option_line("raft_layers");
optgroup->append_single_option_line("raft_contact_distance");
optgroup->append_single_option_line("raft_layers", "support_settings_raft");
optgroup->append_single_option_line("raft_contact_distance", "support_settings_raft");
optgroup = page->new_optgroup(L("Support filament"), L"param_support_filament");
optgroup->append_single_option_line("support_filament", "support#support-filament");
optgroup->append_single_option_line("support_interface_filament", "support#support-filament");
optgroup->append_single_option_line("support_interface_not_for_body", "support#support-filament");
optgroup->append_single_option_line("support_filament", "support_settings_filament#base");
optgroup->append_single_option_line("support_interface_filament", "support_settings_filament#interface");
optgroup->append_single_option_line("support_interface_not_for_body", "support_settings_filament#avoid-interface-filament-for-base");
optgroup = page->new_optgroup(L("Support ironing"), L"param_ironing");
optgroup->append_single_option_line("support_ironing");
optgroup->append_single_option_line("support_ironing_pattern");
optgroup->append_single_option_line("support_ironing_flow");
optgroup->append_single_option_line("support_ironing_spacing");
optgroup->append_single_option_line("support_ironing", "support_settings_ironing");
optgroup->append_single_option_line("support_ironing_pattern", "support_settings_ironing#pattern");
optgroup->append_single_option_line("support_ironing_flow", "support_settings_ironing#flow");
optgroup->append_single_option_line("support_ironing_spacing", "support_settings_ironing#line-spacing");
//optgroup = page->new_optgroup(L("Options for support material and raft"));
// Support
optgroup = page->new_optgroup(L("Advanced"), L"param_advanced");
optgroup->append_single_option_line("support_top_z_distance", "support#top-z-distance");
optgroup->append_single_option_line("support_bottom_z_distance", "support#bottom-z-distance");
optgroup->append_single_option_line("tree_support_wall_count");
optgroup->append_single_option_line("support_base_pattern", "support#base-pattern");
optgroup->append_single_option_line("support_base_pattern_spacing", "support#base-pattern");
optgroup->append_single_option_line("support_angle");
optgroup->append_single_option_line("support_interface_top_layers", "support#base-pattern");
optgroup->append_single_option_line("support_interface_bottom_layers", "support#base-pattern");
optgroup->append_single_option_line("support_interface_pattern", "support#base-pattern");
optgroup->append_single_option_line("support_interface_spacing", "support#base-pattern");
optgroup->append_single_option_line("support_bottom_interface_spacing");
optgroup->append_single_option_line("support_expansion", "support#base-pattern");
//optgroup->append_single_option_line("support_interface_loop_pattern");
optgroup->append_single_option_line("support_top_z_distance", "support_settings_advanced#z-distance");
optgroup->append_single_option_line("support_bottom_z_distance", "support_settings_advanced#z-distance");
optgroup->append_single_option_line("tree_support_wall_count", "support_settings_advanced#support-wall-loops");
optgroup->append_single_option_line("support_base_pattern", "support_settings_advanced#base-pattern");
optgroup->append_single_option_line("support_base_pattern_spacing", "support_settings_advanced#base-pattern-spacing");
optgroup->append_single_option_line("support_angle", "support_settings_advanced#pattern-angle");
optgroup->append_single_option_line("support_interface_top_layers", "support_settings_advanced#interface-layers");
optgroup->append_single_option_line("support_interface_bottom_layers", "support_settings_advanced#interface-layers");
optgroup->append_single_option_line("support_interface_pattern", "support_settings_advanced#interface-pattern");
optgroup->append_single_option_line("support_interface_spacing", "support_settings_advanced#interface-spacing");
optgroup->append_single_option_line("support_bottom_interface_spacing", "support_settings_advanced#interface-spacing");
optgroup->append_single_option_line("support_expansion", "support_settings_advanced#normal-support-expansion");
//optgroup->append_single_option_line("support_interface_loop_pattern", "support_settings_advanced");
optgroup->append_single_option_line("support_object_xy_distance", "support");
optgroup->append_single_option_line("support_object_first_layer_gap", "support");
optgroup->append_single_option_line("bridge_no_support", "support#base-pattern");
optgroup->append_single_option_line("max_bridge_length", "support#tree-support-only-options");
optgroup->append_single_option_line("independent_support_layer_height", "support");
optgroup->append_single_option_line("support_object_xy_distance", "support_settings_advanced#supportobject-xy-distance");
optgroup->append_single_option_line("support_object_first_layer_gap", "support_settings_advanced#supportobject-first-layer-gap");
optgroup->append_single_option_line("bridge_no_support", "support_settings_advanced#dont-support-bridges");
optgroup->append_single_option_line("max_bridge_length", "support_settings_advanced");
optgroup->append_single_option_line("independent_support_layer_height", "support_settings_advanced#independent-support-layer-height");
optgroup = page->new_optgroup(L("Tree supports"), L"param_support_tree");
optgroup->append_single_option_line("tree_support_tip_diameter");
optgroup->append_single_option_line("tree_support_branch_distance", "support#tree-support-only-options");
optgroup->append_single_option_line("tree_support_branch_distance_organic", "support#tree-support-only-options");
optgroup->append_single_option_line("tree_support_top_rate");
optgroup->append_single_option_line("tree_support_branch_diameter", "support#tree-support-only-options");
optgroup->append_single_option_line("tree_support_branch_diameter_organic", "support#tree-support-only-options");
optgroup->append_single_option_line("tree_support_branch_diameter_angle");
optgroup->append_single_option_line("tree_support_branch_angle", "support#tree-support-only-options");
optgroup->append_single_option_line("tree_support_branch_angle_organic", "support#tree-support-only-options");
optgroup->append_single_option_line("tree_support_angle_slow");
optgroup->append_single_option_line("tree_support_adaptive_layer_height");
optgroup->append_single_option_line("tree_support_auto_brim");
optgroup->append_single_option_line("tree_support_brim_width");
optgroup->append_single_option_line("tree_support_tip_diameter", "support_settings_tree#tip-diameter");
optgroup->append_single_option_line("tree_support_branch_distance", "support_settings_tree#branch-distance");
optgroup->append_single_option_line("tree_support_branch_distance_organic", "support_settings_tree#branch-distance");
optgroup->append_single_option_line("tree_support_top_rate", "support_settings_tree#branch-density");
optgroup->append_single_option_line("tree_support_branch_diameter", "support_settings_tree#branch-diameter");
optgroup->append_single_option_line("tree_support_branch_diameter_organic", "support_settings_tree#branch-diameter");
optgroup->append_single_option_line("tree_support_branch_diameter_angle", "support_settings_tree#branch-diameter-angle");
optgroup->append_single_option_line("tree_support_branch_angle", "support_settings_tree#branch-angle");
optgroup->append_single_option_line("tree_support_branch_angle_organic", "support_settings_tree#branch-angle");
optgroup->append_single_option_line("tree_support_angle_slow", "support_settings_tree#preferred-branch-angle");
optgroup->append_single_option_line("tree_support_adaptive_layer_height", "support_settings_tree");
optgroup->append_single_option_line("tree_support_auto_brim", "support_settings_tree");
optgroup->append_single_option_line("tree_support_brim_width", "support_settings_tree");
page = add_options_page(L("Multimaterial"), "custom-gcode_multi_material"); // ORCA: icon only visible on placeholders
optgroup = page->new_optgroup(L("Prime tower"), L"param_tower");
optgroup->append_single_option_line("enable_prime_tower");
optgroup->append_single_option_line("prime_tower_width");
optgroup->append_single_option_line("prime_volume");
optgroup->append_single_option_line("prime_tower_brim_width");
optgroup->append_single_option_line("wipe_tower_rotation_angle");
optgroup->append_single_option_line("wipe_tower_bridging");
optgroup->append_single_option_line("wipe_tower_extra_spacing");
optgroup->append_single_option_line("wipe_tower_extra_flow");
optgroup->append_single_option_line("wipe_tower_max_purge_speed");
optgroup->append_single_option_line("wipe_tower_wall_type");
optgroup->append_single_option_line("wipe_tower_cone_angle");
optgroup->append_single_option_line("wipe_tower_extra_rib_length");
optgroup->append_single_option_line("wipe_tower_rib_width");
optgroup->append_single_option_line("wipe_tower_fillet_wall");
optgroup->append_single_option_line("wipe_tower_no_sparse_layers");
optgroup->append_single_option_line("single_extruder_multi_material_priming");
optgroup->append_single_option_line("enable_prime_tower", "multimaterial_settings_prime_tower");
optgroup->append_single_option_line("prime_tower_width", "multimaterial_settings_prime_tower#width");
optgroup->append_single_option_line("prime_volume", "multimaterial_settings_prime_tower");
optgroup->append_single_option_line("prime_tower_brim_width", "multimaterial_settings_prime_tower#brim-width");
optgroup->append_single_option_line("wipe_tower_rotation_angle", "multimaterial_settings_prime_tower#wipe-tower-rotation-angle");
optgroup->append_single_option_line("wipe_tower_bridging", "multimaterial_settings_prime_tower#maximal-bridging-distance");
optgroup->append_single_option_line("wipe_tower_extra_spacing", "multimaterial_settings_prime_tower#wipe-tower-purge-lines-spacing");
optgroup->append_single_option_line("wipe_tower_extra_flow", "multimaterial_settings_prime_tower#extra-flow-for-purge");
optgroup->append_single_option_line("wipe_tower_max_purge_speed", "multimaterial_settings_prime_tower#maximum-wipe-tower-print-speed");
optgroup->append_single_option_line("wipe_tower_wall_type", "multimaterial_settings_prime_tower#wall-type");
optgroup->append_single_option_line("wipe_tower_cone_angle", "multimaterial_settings_prime_tower#stabilization-cone-apex-angle");
optgroup->append_single_option_line("wipe_tower_extra_rib_length", "multimaterial_settings_prime_tower#extra-rib-length");
optgroup->append_single_option_line("wipe_tower_rib_width", "multimaterial_settings_prime_tower#rib-width");
optgroup->append_single_option_line("wipe_tower_fillet_wall", "multimaterial_settings_prime_tower#fillet-wall");
optgroup->append_single_option_line("wipe_tower_no_sparse_layers", "multimaterial_settings_prime_tower#no-sparse-layers");
optgroup->append_single_option_line("single_extruder_multi_material_priming", "multimaterial_settings_prime_tower");
optgroup = page->new_optgroup(L("Filament for Features"), L"param_filament_for_features");
optgroup->append_single_option_line("wall_filament");
optgroup->append_single_option_line("sparse_infill_filament");
optgroup->append_single_option_line("solid_infill_filament");
optgroup->append_single_option_line("wipe_tower_filament");
optgroup->append_single_option_line("wall_filament", "multimaterial_settings_filament_for_features#walls");
optgroup->append_single_option_line("sparse_infill_filament", "multimaterial_settings_filament_for_features#infill");
optgroup->append_single_option_line("solid_infill_filament", "multimaterial_settings_filament_for_features#solid-infill");
optgroup->append_single_option_line("wipe_tower_filament", "multimaterial_settings_filament_for_features#wipe-tower");
optgroup = page->new_optgroup(L("Ooze prevention"), L"param_ooze_prevention");
optgroup->append_single_option_line("ooze_prevention");
optgroup->append_single_option_line("standby_temperature_delta");
optgroup->append_single_option_line("preheat_time");
optgroup->append_single_option_line("preheat_steps");
optgroup->append_single_option_line("ooze_prevention", "multimaterial_settings_ooze_prevention");
optgroup->append_single_option_line("standby_temperature_delta", "multimaterial_settings_ooze_prevention#temperature-variation");
optgroup->append_single_option_line("preheat_time", "multimaterial_settings_ooze_prevention#preheat-time");
optgroup->append_single_option_line("preheat_steps", "multimaterial_settings_ooze_prevention#preheat-steps");
optgroup = page->new_optgroup(L("Flush options"), L"param_flush");
optgroup->append_single_option_line("flush_into_infill", "reduce-wasting-during-filament-change#wipe-into-infill");
optgroup->append_single_option_line("flush_into_objects", "reduce-wasting-during-filament-change#wipe-into-object");
optgroup->append_single_option_line("flush_into_support", "reduce-wasting-during-filament-change#wipe-into-support-enabled-by-default");
optgroup->append_single_option_line("flush_into_infill", "multimaterial_settings_flush_options#flush-into-objects-infill");
optgroup->append_single_option_line("flush_into_objects", "multimaterial_settings_flush_options");
optgroup->append_single_option_line("flush_into_support", "multimaterial_settings_flush_options#flush-into-objects-support");
optgroup = page->new_optgroup(L("Advanced"), L"advanced");
optgroup->append_single_option_line("interlocking_beam");
optgroup->append_single_option_line("interface_shells");
optgroup->append_single_option_line("mmu_segmented_region_max_width");
optgroup->append_single_option_line("mmu_segmented_region_interlocking_depth");
optgroup->append_single_option_line("interlocking_beam_width");
optgroup->append_single_option_line("interlocking_orientation");
optgroup->append_single_option_line("interlocking_beam_layer_count");
optgroup->append_single_option_line("interlocking_depth");
optgroup->append_single_option_line("interlocking_boundary_avoidance");
optgroup->append_single_option_line("interlocking_beam", "multimaterial_settings_advanced#interlocking-beam");
optgroup->append_single_option_line("interface_shells", "multimaterial_settings_advanced#interface-shells");
optgroup->append_single_option_line("mmu_segmented_region_max_width", "multimaterial_settings_advanced#maximum-width-of-segmented-region");
optgroup->append_single_option_line("mmu_segmented_region_interlocking_depth", "multimaterial_settings_advanced#interlocking-depth-of-segmented-region");
optgroup->append_single_option_line("interlocking_beam_width", "multimaterial_settings_advanced#interlocking-beam-width");
optgroup->append_single_option_line("interlocking_orientation", "multimaterial_settings_advanced#interlocking-direction");
optgroup->append_single_option_line("interlocking_beam_layer_count", "multimaterial_settings_advanced#interlocking-beam-layers");
optgroup->append_single_option_line("interlocking_depth", "multimaterial_settings_advanced#interlocking-depth");
optgroup->append_single_option_line("interlocking_boundary_avoidance", "multimaterial_settings_advanced#interlocking-boundary-avoidance");
page = add_options_page(L("Others"), "custom-gcode_other"); // ORCA: icon only visible on placeholders
optgroup = page->new_optgroup(L("Skirt"), L"param_skirt");
optgroup->append_single_option_line("skirt_loops");
optgroup->append_single_option_line("skirt_type");
optgroup->append_single_option_line("min_skirt_length");
optgroup->append_single_option_line("skirt_distance");
optgroup->append_single_option_line("skirt_start_angle");
optgroup->append_single_option_line("skirt_speed");
optgroup->append_single_option_line("skirt_height");
optgroup->append_single_option_line("draft_shield");
optgroup->append_single_option_line("single_loop_draft_shield");
optgroup->append_single_option_line("skirt_loops", "others_settings_skirt#loops");
optgroup->append_single_option_line("skirt_type", "others_settings_skirt#type");
optgroup->append_single_option_line("min_skirt_length", "others_settings_skirt#minimum-extrusion-length");
optgroup->append_single_option_line("skirt_distance", "others_settings_skirt#distance");
optgroup->append_single_option_line("skirt_start_angle", "others_settings_skirt#start-point");
optgroup->append_single_option_line("skirt_speed", "others_settings_skirt#speed");
optgroup->append_single_option_line("skirt_height", "others_settings_skirt#height");
optgroup->append_single_option_line("draft_shield", "others_settings_skirt#shield");
optgroup->append_single_option_line("single_loop_draft_shield", "others_settings_skirt#single-loop-after-first-layer");
optgroup = page->new_optgroup(L("Brim"), L"param_adhension");
optgroup->append_single_option_line("brim_type", "auto-brim");
optgroup->append_single_option_line("brim_width", "auto-brim#manual");
optgroup->append_single_option_line("brim_object_gap", "auto-brim#brim-object-gap");
optgroup->append_single_option_line("brim_ears_max_angle");
optgroup->append_single_option_line("brim_ears_detection_length");
optgroup->append_single_option_line("brim_type", "others_settings_brim#type");
optgroup->append_single_option_line("brim_width", "others_settings_brim#width");
optgroup->append_single_option_line("brim_object_gap", "others_settings_brim#brim-object-gap");
optgroup->append_single_option_line("brim_ears_max_angle", "others_settings_brim#ear-max-angle");
optgroup->append_single_option_line("brim_ears_detection_length", "others_settings_brim#ear-detection-radius");
optgroup = page->new_optgroup(L("Special mode"), L"param_special");
optgroup->append_single_option_line("slicing_mode");
optgroup->append_single_option_line("print_sequence", "sequent-print");
optgroup->append_single_option_line("print_order");
optgroup->append_single_option_line("spiral_mode", "spiral-vase");
optgroup->append_single_option_line("spiral_mode_smooth", "spiral-vase#smooth");
optgroup->append_single_option_line("spiral_mode_max_xy_smoothing", "spiral-vase#max-xy-smoothing");
optgroup->append_single_option_line("spiral_starting_flow_ratio", "spiral-vase#starting-flow-ratio");
optgroup->append_single_option_line("spiral_finishing_flow_ratio", "spiral-vase#finishing-flow-ratio");
optgroup->append_single_option_line("slicing_mode", "others_settings_special_mode#slicing-mode");
optgroup->append_single_option_line("print_sequence", "others_settings_special_mode#print-sequence");
optgroup->append_single_option_line("print_order", "others_settings_special_mode#intra-layer-order");
optgroup->append_single_option_line("spiral_mode", "others_settings_special_mode#spiral-vase");
optgroup->append_single_option_line("spiral_mode_smooth", "others_settings_special_mode#smooth-spiral");
optgroup->append_single_option_line("spiral_mode_max_xy_smoothing", "others_settings_special_mode#max-xy-smoothing");
optgroup->append_single_option_line("spiral_starting_flow_ratio", "others_settings_special_mode#spiral-starting-flow-ratio");
optgroup->append_single_option_line("spiral_finishing_flow_ratio", "others_settings_special_mode#spiral-finishing-flow-ratio");
optgroup->append_single_option_line("timelapse_type", "Timelapse");
optgroup->append_single_option_line("timelapse_type", "others_settings_special_mode#timelapse");
optgroup->append_single_option_line("fuzzy_skin");
optgroup->append_single_option_line("fuzzy_skin_noise_type");
optgroup->append_single_option_line("fuzzy_skin_point_distance");
optgroup->append_single_option_line("fuzzy_skin_thickness");
optgroup->append_single_option_line("fuzzy_skin_scale");
optgroup->append_single_option_line("fuzzy_skin_octaves");
optgroup->append_single_option_line("fuzzy_skin_persistence");
optgroup->append_single_option_line("fuzzy_skin_first_layer");
optgroup->append_single_option_line("fuzzy_skin", "others_settings_special_mode#fuzzy-skin");
optgroup->append_single_option_line("fuzzy_skin_noise_type", "others_settings_special_mode#fuzzy-skin-mode");
optgroup->append_single_option_line("fuzzy_skin_point_distance", "others_settings_special_mode#point-distance");
optgroup->append_single_option_line("fuzzy_skin_thickness", "others_settings_special_mode#skin-thickness");
optgroup->append_single_option_line("fuzzy_skin_scale", "others_settings_special_mode#skin-feature-size");
optgroup->append_single_option_line("fuzzy_skin_octaves", "others_settings_special_mode#skin-noise-octaves");
optgroup->append_single_option_line("fuzzy_skin_persistence", "others_settings_special_mode#skin-noise-persistence");
optgroup->append_single_option_line("fuzzy_skin_first_layer", "others_settings_special_mode#apply-fuzzy-skin-to-first-layer");
optgroup = page->new_optgroup(L("G-code output"), L"param_gcode");
optgroup->append_single_option_line("reduce_infill_retraction");
optgroup->append_single_option_line("gcode_add_line_number");
optgroup->append_single_option_line("gcode_comments");
optgroup->append_single_option_line("gcode_label_objects");
optgroup->append_single_option_line("exclude_object");
optgroup->append_single_option_line("reduce_infill_retraction", "others_settings_g_code_output#reduce-infill-retraction");
optgroup->append_single_option_line("gcode_add_line_number", "others_settings_g_code_output#add-line-number");
optgroup->append_single_option_line("gcode_comments", "others_settings_g_code_output#verbose-g-code");
optgroup->append_single_option_line("gcode_label_objects", "others_settings_g_code_output#label-objects");
optgroup->append_single_option_line("exclude_object", "others_settings_g_code_output#exclude-objects");
option = optgroup->get_option("filename_format");
// option.opt.full_width = true;
option.opt.is_code = true;
option.opt.multiline = true;
// option.opt.height = 5;
optgroup->append_single_option_line(option);
optgroup->append_single_option_line(option, "others_settings_g_code_output#filename-format");
optgroup = page->new_optgroup(L("Post-processing Scripts"), L"param_gcode", 0);
option = optgroup->get_option("post_process");
option.opt.full_width = true;
option.opt.is_code = true;
option.opt.height = 15;
optgroup->append_single_option_line(option);
optgroup->append_single_option_line(option, "others_settings_post_processing_scripts");
optgroup = page->new_optgroup(L("Notes"), "note", 0);
option = optgroup->get_option("notes");
option.opt.full_width = true;
option.opt.height = 25;//250;
optgroup->append_single_option_line(option);
optgroup->append_single_option_line(option, "others_settings_notes");
// Orca: hide the dependencies tab for process for now. The UI is not ready yet.
// page = add_options_page(L("Dependencies"), "param_profile_dependencies"); // icons ready