Wiki Update 7 (#10007)

* Large images optimizations

* Add image and update instructions for junction deviation

Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.

* Update README links to Wiki

* Fix Wiki image paths + Typos

* Fixes, typos and Infill improvements

* Update VFA calibration guide and add resonance avoidance

Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.

* Add surface density setting to top/bottom shells docs

* Ironing Wiki Wip

* Wall and surfaces wiki wip

* Fix top/bottom link

* Better topbottom reddirect

* bridging wiki wip

* Fix TOP bottom

* Wall wiki wip

* strength advanced wiki wip

* speed advance renaming

* inital speed wiki wip

* Other Layer Speed Wiki Wip...

* Speed overhang Wiki WIP

* Travel speed wiki wip

* Speed acceleration wiki wip

* Update speed_settings_initial_layer_speed.md

* Jerk Wiki Wip

* support wiki wip

* Raft wiki wip

* support filamnet wiki wip

* Support ironing wiki wip

* Support advanced Wiki Wip

* Tree wiki wip

* STL images optimizations

* Prime tower wiki wip

* Update PA line diagram images

Were bigger than original used to crop this ones.

* Ooze wiki wip

* Flush wiki wip

* Image optimizatios

* Clarify TPMS-D infill description

Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* images+++

* Multimaterial advanced Wiki Wip

* Skirt Wiki Wip

* Brim wiki wip

* Add Junction Deviation formula to documentation

Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Others special mode Wiki Wip

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Fix links

* Fill Multiline infill Wiki

Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.

* Multiline infill wiki update

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Multiline Tab.cpp

* Gcode output Wiki Wip

* Others wiki wips

* Home quality

* Add process links in home

* Quality Basic Missing descriptions

* Update quality_settings_bridging.md

* basic desc

* basic advance strentgth

* Basic speed

* basic other speeds

* Fix link

* Update speed_settings_overhang_speed.md

* Update speed_settings_travel.md

* Update speed_settings_acceleration.md

* Fix

* Expand documentation for acceleration and jerk settings

* Support wiki

* Raft wiki

* Support wiki desc

* Prime tower wiki

* Multimaterial wiki desc

* Filament to features wiki

* Ooze improve

* Fix duplicate text

* Fix typo in volumetric speed calibration guide

Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.

* centeres image

* Overlapping gif

* Others wiki basic desc

* Clarify retraction calibration recommendation

Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Links in Readme + minor change

Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.

* Add SVG icons to infill pattern comparison table

* Delete doc/images/gui directory

remplaced with GUI

* Create process-preset-full.png

---------

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>

doc/print_settings/others/others_settings_brim.md

@@ -0,0 +1,46 @@
+# Brim
+
+Brim is a flat layer printed around the base of a model to help with adhesion to the print bed. It can be useful for models with small footprints or those that are prone to warping.
+
+## Type
+
+This controls the generation of the brim at outer and/or inner side of models.  
+Auto means the brim width is analyzed and calculated automatically.
+
+### Painted
+
+Painted will generate a brim only on painted areas of the model in the Prepare tab.
+
+### Outer
+
+Outer will generate a brim around the outer perimeter of the model.
+Easier to remove than inner brim but can affect the model's appearance if the brim is not removed cleanly.
+
+### Inner
+
+Inner will generate a brim around the inner perimeter of the model.
+More difficult to remove than outer brim and may close the model's inner details, but can hide where the brim was removed.
+
+### Mouse Ears
+
+Mouse ears are small extensions added to the brim to help with adhesion and prevent warping.
+Usually this ears are added in the corners of objects to provide additional support and affect the model's appearance less than a full brim.
+
+#### Ear max angle
+
+Maximum angle to let a brim ear appear.  
+If set to 0, no brim will be created.  
+If set to ~180, brim will be created on everything but straight sections.
+
+#### Ear detection radius
+
+The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.  
+0 to deactivate.
+
+## Width
+
+Distance from model to the outermost brim line.
+
+## Brim-Object Gap
+
+A gap between innermost brim line and object can make brim be removed more easily.