Wiki Update 7 (#10007)

Browse Source

* Large images optimizations

* Add image and update instructions for junction deviation

Added a new image illustrating the printer jerk limitation setting and updated the calibration documentation to clarify steps for setting Maximum Junction Deviation. Improved formatting and corrected a typo in the instructions.

* Update README links to Wiki

* Fix Wiki image paths + Typos

* Fixes, typos and Infill improvements

* Update VFA calibration guide and add resonance avoidance

Expanded the VFA calibration documentation with more detailed explanations of VFA causes, the VFA Speed Test, and how to use the Resonance Avoidance Speed Range. Added a new image illustrating the resonance avoidance configuration.

* Add surface density setting to top/bottom shells docs

* Ironing Wiki Wip

* Wall and surfaces wiki wip

* Fix top/bottom link

* Better topbottom reddirect

* bridging wiki wip

* Fix TOP bottom

* Wall wiki wip

* strength advanced wiki wip

* speed advance renaming

* inital speed wiki wip

* Other Layer Speed Wiki Wip...

* Speed overhang Wiki WIP

* Travel speed wiki wip

* Speed acceleration wiki wip

* Update speed_settings_initial_layer_speed.md

* Jerk Wiki Wip

* support wiki wip

* Raft wiki wip

* support filamnet wiki wip

* Support ironing wiki wip

* Support advanced Wiki Wip

* Tree wiki wip

* STL images optimizations

* Prime tower wiki wip

* Update PA line diagram images

Were bigger than original used to crop this ones.

* Ooze wiki wip

* Flush wiki wip

* Image optimizatios

* Clarify TPMS-D infill description

Updated the TPMS-D infill section to specify that it refers to the Schwarz Diamond surface, improving clarity for users. Also updated the infill calculator spreadsheet.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* images+++

* Multimaterial advanced Wiki Wip

* Skirt Wiki Wip

* Brim wiki wip

* Add Junction Deviation formula to documentation

Included the mathematical formula for Junction Deviation in the cornering calibration documentation to clarify its calculation.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Others special mode Wiki Wip

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Fix links

* Fill Multiline infill Wiki

Introduced a new section in the infill documentation describing the Fill Multiline setting, its differences from other slicers, and its use cases. Added a comparison table and illustrative GIF to clarify how OrcaSlicer maintains density and material usage when using multiple infill lines.

* Multiline infill wiki update

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Multiline Tab.cpp

* Gcode output Wiki Wip

* Others wiki wips

* Home quality

* Add process links in home

* Quality Basic Missing descriptions

* Update quality_settings_bridging.md

* basic desc

* basic advance strentgth

* Basic speed

* basic other speeds

* Fix link

* Update speed_settings_overhang_speed.md

* Update speed_settings_travel.md

* Update speed_settings_acceleration.md

* Fix

* Expand documentation for acceleration and jerk settings

* Support wiki

* Raft wiki

* Support wiki desc

* Prime tower wiki

* Multimaterial wiki desc

* Filament to features wiki

* Ooze improve

* Fix duplicate text

* Fix typo in volumetric speed calibration guide

Corrected 'promoted' to 'prompted' in the instructions for entering test settings in the volumetric speed calibration documentation.

* centeres image

* Overlapping gif

* Others wiki basic desc

* Clarify retraction calibration recommendation

Expanded the explanation for calibrating retraction settings, specifying that it should be done after Flow and Pressure Advance calibration for optimal extrusion setup.

Co-Authored-By: Rodrigo <162915171+RF47@users.noreply.github.com>

* Links in Readme + minor change

Refined links and formatting in README for better navigation. Expanded wall printing order section in quality settings documentation to clarify Inner/Outer, Inner/Outer/Inner, and Outer/Inner modes. Updated calibration guide images and formatting for improved clarity.

* Add SVG icons to infill pattern comparison table

* Delete doc/images/gui directory

remplaced with GUI

* Create process-preset-full.png

---------

Co-authored-by: Rodrigo <162915171+RF47@users.noreply.github.com>

...

This commit is contained in:

Ian Bassi

2025-07-07 21:53:53 -03:00

committed by GitHub

parent b785f40fb0

commit eba08bf727

94 changed files with 1618 additions and 382 deletions

Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL

Download Patch File Download Diff File Expand all files Collapse all files

BIN

doc/images/Flow-Rate/flowrate-0-5.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 382 KiB After Width:  |  Height:  |  Size: 213 KiB

BIN

doc/images/Flow-Rate/flowrate-6.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 738 KiB After Width:  |  Height:  |  Size: 350 KiB

BIN

doc/images/Flow-Rate/flowrate-pass1.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 1.8 MiB After Width:  |  Height:  |  Size: 838 KiB

BIN

doc/images/Flow-Rate/flowrate-pass2.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 550 KiB After Width:  |  Height:  |  Size: 329 KiB

0

doc/images/gui/process-preset-full.png → doc/images/GUI/process-preset-full.png

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 50 KiB After Width:  |  Height:  |  Size: 50 KiB

BIN

doc/images/InputShaping/IS_damp_klipper_print_measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 5.5 MiB After Width:  |  Height:  |  Size: 406 KiB

BIN

doc/images/InputShaping/IS_damp_marlin_print_measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 2.4 MiB After Width:  |  Height:  |  Size: 141 KiB

BIN

doc/images/InputShaping/IS_freq_klipper_print_measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 4.0 MiB After Width:  |  Height:  |  Size: 298 KiB

BIN

doc/images/InputShaping/IS_freq_marlin_print_measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 151 KiB After Width:  |  Height:  |  Size: 134 KiB

BIN

doc/images/JunctionDeviation/jd_first_print_measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 537 KiB After Width:  |  Height:  |  Size: 148 KiB

BIN

doc/images/JunctionDeviation/jd_printer_jerk_limitation.png Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 14 KiB

BIN

doc/images/JunctionDeviation/jd_second_print_measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 589 KiB After Width:  |  Height:  |  Size: 148 KiB

BIN

doc/images/Precision/PolyHoles.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 364 KiB After Width:  |  Height:  |  Size: 139 KiB

BIN

doc/images/STL-Transformation/stl-transformation-params.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 82 KiB After Width:  |  Height:  |  Size: 13 KiB

BIN

doc/images/STL-Transformation/stl-transformation-smooth-rough.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 161 KiB After Width:  |  Height:  |  Size: 62 KiB

BIN

doc/images/STL-Transformation/stl-transformation-split.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 154 KiB After Width:  |  Height:  |  Size: 53 KiB

BIN

doc/images/Temp-calib/temp-tower.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 238 KiB After Width:  |  Height:  |  Size: 131 KiB

BIN

doc/images/fill/infill-multiline-1-5.gif Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 192 KiB

BIN

doc/images/fill/infill-multiline-esthetic.gif Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 105 KiB

BIN

doc/images/fill/infill-multiline-overlapping.gif Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 39 KiB

0

doc/images/fill/infill-top-coss-zag.png → doc/images/fill/infill-top-cross-zag.png

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 41 KiB After Width:  |  Height:  |  Size: 41 KiB

BIN

doc/images/pa/apa-expected-results.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 658 KiB After Width:  |  Height:  |  Size: 58 KiB

BIN

doc/images/pa/apa-expected-seam.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 1.4 MiB After Width:  |  Height:  |  Size: 46 KiB

BIN

doc/images/pa/apa-expected-solid-infill.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 1.8 MiB After Width:  |  Height:  |  Size: 99 KiB

BIN

doc/images/pa/apa-identify-optimal.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 110 KiB After Width:  |  Height:  |  Size: 44 KiB

BIN

doc/images/pa/apa-identify-too-high.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 108 KiB After Width:  |  Height:  |  Size: 43 KiB

BIN

doc/images/pa/apa-identify-too-low.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 122 KiB After Width:  |  Height:  |  Size: 49 KiB

BIN

doc/images/pa/apa-setup-result-acceleration-jerk.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 388 KiB After Width:  |  Height:  |  Size: 32 KiB

BIN

doc/images/pa/apa-setup-result-speed.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 161 KiB After Width:  |  Height:  |  Size: 16 KiB

BIN

doc/images/pa/apa-test.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 429 KiB After Width:  |  Height:  |  Size: 88 KiB

BIN

doc/images/pa/apa-test210.jpg

Binary file not shown.

Side by Side Before Width:  |  Height:  |  Size: 524 KiB

BIN

doc/images/pa/apa-test210.png Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 184 KiB

BIN

doc/images/pa/apa-unexpected-solid-infill.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 1.1 MiB After Width:  |  Height:  |  Size: 131 KiB

BIN

doc/images/pa/pa-line-0-016.jpg

Binary file not shown.

Side by Side Before Width:  |  Height:  |  Size: 250 KiB

BIN

doc/images/pa/pa-line-0-016.png Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 40 KiB

BIN

doc/images/pa/pa-lines.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 6.3 MiB After Width:  |  Height:  |  Size: 235 KiB

BIN

doc/images/pa/pa-pattern-batch-plater.png

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 462 KiB After Width:  |  Height:  |  Size: 220 KiB

BIN

doc/images/pa/pa-tower-measure.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 1.3 MiB After Width:  |  Height:  |  Size: 112 KiB

BIN

doc/images/pa/pa-tower.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 669 KiB After Width:  |  Height:  |  Size: 110 KiB

BIN

doc/images/retraction/retraction_test_print.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 630 KiB After Width:  |  Height:  |  Size: 149 KiB

BIN

doc/images/seam/seam-quality.jpg

Binary file not shown.

Side by Side Swipe Overlay Before Width:  |  Height:  |  Size: 1.1 MiB After Width:  |  Height:  |  Size: 135 KiB

BIN

doc/images/top-bottom-shells/top-bottom-shells.png Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 30 KiB

BIN

doc/images/vfa/vfa_resonance_avoidance.png Normal file

Binary file not shown.

Side by Side After Width:  |  Height:  |  Size: 12 KiB