From ea49b4851e2c2f96ac101af60194725408373548 Mon Sep 17 00:00:00 2001 From: Eric McCann Date: Tue, 29 Sep 2026 07:26:38 -0400 Subject: [PATCH] Make U1 filament notes readable without commit references Co-authored-by: Codex --- .../filament/Generic PETG @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Generic PETG @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic PETG @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic PETG @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Generic PETG HF @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Generic PETG HF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic PETG HF @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic PETG HF @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Generic PLA @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Generic PLA @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic PLA @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic PLA @U1 0.8 High Flow nozzle.json | 2 +- .../Generic PLA High Speed @U1 0.2 High Flow nozzle.json | 2 +- .../Generic PLA High Speed @U1 0.4 High Flow nozzle.json | 2 +- .../Generic PLA High Speed @U1 0.6 High Flow nozzle.json | 2 +- .../Generic PLA High Speed @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Generic TPU @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Generic TPU @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Generic TPU @U1 0.8 High Flow nozzle.json | 2 +- .../Polymaker General PLA Family @U1 0.4 High Flow nozzle.json | 2 +- .../Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json | 2 +- .../Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json | 2 +- .../Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json | 2 +- .../Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json | 2 +- .../Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json | 2 +- .../Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json | 2 +- .../Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json | 2 +- .../Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json | 2 +- .../Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json | 2 +- .../Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json | 2 +- .../Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json | 2 +- .../Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json | 2 +- .../Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json | 2 +- .../Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json | 2 +- .../Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json | 2 +- .../filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json | 2 +- 80 files changed, 80 insertions(+), 80 deletions(-) diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json index 69a948e993..b3774299ab 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.2 High Flow nozzle.json @@ -17,6 +17,6 @@ "1" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json index c0ea593f87..3d2d110ab8 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json index dbb184c629..4c39a6b53f 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json index f34b489862..7700ec94a9 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json index bf10c3f60a..7afbd3ad2f 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.2 High Flow nozzle.json @@ -17,6 +17,6 @@ "1" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json index f6c8c07549..6e79495a5d 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "16" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json index a9a0fad842..e2734fdbe7 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "16" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json index ec6e6fb489..21c39efbb2 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG HF @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "16" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json index 541068fb5a..e1ebd81f1c 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "11" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json index 5533276d17..0bc1021008 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "11.5" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json index e351a4ca4e..acdb9f92c9 100644 --- a/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PETG-CF @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "11.5" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json index 68231acfb7..4c60340703 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.2 High Flow nozzle.json @@ -17,6 +17,6 @@ "1.6" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json index 2baa380948..04f5b81b65 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json index 10c26c9d84..e9cd941ccb 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json index e718fafcf4..0df240dcd0 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json index 86932032b6..228901f1cf 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.2 High Flow nozzle.json @@ -17,6 +17,6 @@ "2" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json index af222bcf59..e016e53d1a 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "18" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json index 69d900ad3f..348db5014d 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "18" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json index 7aab3575f0..f377e30f7b 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA High Speed @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "18" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json index edcf2ba1b4..53fc87bb9b 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.2 High Flow nozzle.json @@ -17,6 +17,6 @@ "2" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json index c3670ffc51..980840da51 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "7.5" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json index 9bb5ac2b2e..d3e0aced6d 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "7.5" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json index cf4f4fc493..450b030227 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA Silk @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "7.5" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json index 85ca08b766..07af2d1a24 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json index af044f19ea..aa2ae79dc5 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json index 3aba0b6dc9..ddeec0f5bd 100644 --- a/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic PLA-CF @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "12" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json index 665559b2f7..83ff889f31 100644 --- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.4 High Flow nozzle.json @@ -17,6 +17,6 @@ "3.2" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json index 475ad1725c..cd745b81b6 100644 --- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.6 High Flow nozzle.json @@ -17,6 +17,6 @@ "3.2" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json index 3e5a21716f..589302d895 100644 --- a/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Generic TPU @U1 0.8 High Flow nozzle.json @@ -17,6 +17,6 @@ "3.2" ], "filament_notes": [ - "Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json index 2c0f8a6936..22401d9ca5 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "15" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json index c51dce398d..0c9dfe4271 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "12" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json index 724ab002c2..2eac1cc0c2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "12" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json index 0de983e448..fb361728c6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1 0.4 High Flow nozzle.json @@ -45,6 +45,6 @@ "280" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json index 212e9b1044..b5609dc056 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1 0.4 High Flow nozzle.json @@ -45,6 +45,6 @@ "0.02" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json index 6fded62f26..c86ce97a3a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 High Flow nozzle.json @@ -24,6 +24,6 @@ "1" ], "filament_notes": [ - "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json index 5b562ef932..232d346113 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.4 High Flow nozzle.json @@ -63,6 +63,6 @@ "0.035" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json index 1bb8fca6dd..80eb645ad2 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 High Flow nozzle.json @@ -24,6 +24,6 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json index b95ecd4911..10321dcf95 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 High Flow nozzle.json @@ -24,6 +24,6 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json index eec95f80bf..6c67be5752 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "1" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json index 1a17739f69..c25ea01897 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 High Flow nozzle.json @@ -15,7 +15,7 @@ "0.05" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "10" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json index 0fceb6ef5a..675e07357b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "16" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json index 26749c6ecf..d8771ee472 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "16" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json index 6c06c1c4bf..c5473497d8 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG-CF @U1 0.4 High Flow nozzle.json @@ -60,6 +60,6 @@ "0.028" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json index 3d2e16dc7f..86cd96747b 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "15" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json index 1a63ff75cc..f408b23651 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 High Flow nozzle.json @@ -24,7 +24,7 @@ "0.024" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "15" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json index b2f4efcfb1..70c4b76b98 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 High Flow nozzle.json @@ -21,6 +21,6 @@ "0.023" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PLA Glow @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json index 3b2e3541c4..f9f65c0f64 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 High Flow nozzle.json @@ -27,6 +27,6 @@ "1" ], "filament_notes": [ - "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json index 45bf88f8b5..6a39076a6f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.4 High Flow nozzle.json @@ -39,6 +39,6 @@ "0.024" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA Matte @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json index 2430b54a9d..6c471d4f08 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 High Flow nozzle.json @@ -27,6 +27,6 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json index 38aed6438a..d076c056a5 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 High Flow nozzle.json @@ -27,6 +27,6 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Matte @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json index d8eba5a227..a3715598dd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 High Flow nozzle.json @@ -12,6 +12,6 @@ "2" ], "filament_notes": [ - "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json index 96869e7af9..23626faf6a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.4 High Flow nozzle.json @@ -18,6 +18,6 @@ "Slope Lift" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Silk @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json index e71fc44138..b4f510bfec 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 High Flow nozzle.json @@ -12,6 +12,6 @@ "10" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json index 4b8d8be438..4919383540 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 High Flow nozzle.json @@ -12,6 +12,6 @@ "10" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 10 mm^3/s, from Snorca standard preset Snapmaker PLA Silk @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json index dd492516fb..4b3e1405bb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 High Flow nozzle.json @@ -18,6 +18,6 @@ "1" ], "filament_notes": [ - "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json index 03be272261..48a4044180 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.4 High Flow nozzle.json @@ -21,6 +21,6 @@ "0.024" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 40 mm^3/s, from Snorca HF preset Snapmaker PLA SnapSpeed @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json index 8bb018713c..92c7b1388d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 High Flow nozzle.json @@ -18,6 +18,6 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json index 6af5875213..20db16271a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 High Flow nozzle.json @@ -18,6 +18,6 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA SnapSpeed @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json index 66ea29ff0c..30c289604f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.2 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "1.6" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json index dd3134ef2b..d8ab413ff1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 High Flow nozzle.json @@ -12,7 +12,7 @@ "0.024" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 12 mm^3/s, from Snorca HF preset Snapmaker PLA Translucent @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "12" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json index 647971457c..08ef19a9cb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "12" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json index ef2bcbe096..a2e1b4dc16 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker PLA Translucent @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "12" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json index 5f3d8d6cc7..47fa100cd1 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 High Flow nozzle.json @@ -21,6 +21,6 @@ "0.024" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA Wood @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json index b30036af55..9fc8c36369 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 High Flow nozzle.json @@ -18,6 +18,6 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json index 9bbf33e51b..5300cdbb96 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 High Flow nozzle.json @@ -15,7 +15,7 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PLA Wood @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "20" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json index 310efaefe2..b156c65012 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 High Flow nozzle.json @@ -33,6 +33,6 @@ "0.02" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 20 mm^3/s, from Snorca HF preset Snapmaker PLA-CF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json index 3fecd0e77c..28e15cb5eb 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 High Flow nozzle.json @@ -24,6 +24,6 @@ "1" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json index 0f5a73930a..7c62ffd8ed 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 High Flow nozzle.json @@ -24,6 +24,6 @@ "1" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Snapmaker PLA-CF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json index ca38fd6675..ab3a76e43d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.4 High Flow nozzle.json @@ -21,6 +21,6 @@ "0.6" ], "filament_notes": [ - "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer for 0.4 mm nozzles. Volumetric speed ceiling: 6 mm^3/s, from Snorca HF preset Snapmaker PVA @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json index e5ef681dc3..b3f8c6db87 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 High Flow nozzle.json @@ -12,7 +12,7 @@ "0.9506" ], "filament_notes": [ - "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json index 693f9a4c27..b18972c81f 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 High Flow nozzle.json @@ -12,7 +12,7 @@ "0.9312" ], "filament_notes": [ - "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from Snapmaker OrcaSlicer. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 6 mm^3/s, from Snorca standard preset Snapmaker PVA @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ], "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json index 1accbf432d..61b7ca0026 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "3.2" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json index 51edd1e01f..0e85a008d6 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 High Flow nozzle.json @@ -12,6 +12,6 @@ "3.2" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json index 847f0ed8d5..bd3a88d1cd 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 High Flow nozzle.json @@ -12,6 +12,6 @@ "3.5" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 3.5 mm^3/s, from Snorca standard preset Snapmaker TPU 90A @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json index 0b0d178f90..f0b49ea018 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "9" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 9 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json index 887c94ee7b..198b8de558 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 High Flow nozzle.json @@ -12,6 +12,6 @@ "12" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json index cb976d3246..28374dc75a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 High Flow nozzle.json @@ -12,6 +12,6 @@ "16" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker TPU 95A HF @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json index afaefa2460..c976fd3bc9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.4 High Flow nozzle.json @@ -12,6 +12,6 @@ "10.5" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.4 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json index 00dd85f773..98b3b6a564 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.6 High Flow nozzle.json @@ -12,6 +12,6 @@ "10.5" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.6 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json index cb7d2fa74f..8f49d839c3 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU @U1 0.8 High Flow nozzle.json @@ -12,6 +12,6 @@ "10.5" ], "filament_notes": [ - "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." + "Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10.5 mm^3/s, from Snorca standard preset Snapmaker TPU @U1 0.8 nozzle (Snapmaker OrcaSlicer). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament." ] }