diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot
index 13c581ab18..041b59c5ef 100644
--- a/localization/i18n/OrcaSlicer.pot
+++ b/localization/i18n/OrcaSlicer.pot
@@ -1696,7 +1696,7 @@ msgstr ""
 msgid "Click to download new version in default browser: %s"
 msgstr ""
 
-msgid "The Orca Slicer needs an upgrade"
+msgid "OrcaSlicer needs an update"
 msgstr ""
 
 msgid "This is the newest version."
@@ -2135,10 +2135,10 @@ msgstr ""
 msgid "Restore to meters"
 msgstr ""
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr ""
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr ""
 
 msgid "Mesh boolean"
@@ -5269,7 +5269,7 @@ msgstr ""
 msgid "Keyboard Shortcuts"
 msgstr ""
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr ""
 
 msgid "Setup Wizard"
@@ -8049,7 +8049,7 @@ msgstr ""
 msgid "Developer"
 msgstr ""
 
-msgid "Develop mode"
+msgid "Developer mode"
 msgstr ""
 
 msgid "Skip AMS blacklist check"
@@ -16832,7 +16832,7 @@ msgstr ""
 msgid "Please find the best line on your plate"
 msgstr ""
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr ""
 
 msgid "Input Value"
@@ -17537,7 +17537,7 @@ msgstr ""
 msgid "Vendor is not selected, please reselect vendor."
 msgstr ""
 
-msgid "Custom vendor is not input, please input custom vendor."
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 
 msgid ""
@@ -17568,8 +17568,8 @@ msgstr ""
 #, possible-c-format, possible-boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 
 msgid "Some existing presets have failed to be created, as follows:\n"
@@ -19058,7 +19058,7 @@ msgid "Stack objects\nDid you know that you can stack objects as a whole one?"
 msgstr ""
 
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
-msgid "Flush into support/objects/infill\nDid you know that you can save wasted filament by flushing it into support/objects/infill during filament change?"
+msgid "Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?"
 msgstr ""
 
 #: resources/data/hints.ini: [hint:Improve strength]
diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po
index c8a44d1039..af07758cc3 100644
--- a/localization/i18n/ca/OrcaSlicer_ca.po
+++ b/localization/i18n/ca/OrcaSlicer_ca.po
@@ -1781,7 +1781,8 @@ msgstr "S'està carregant la configuració"
 msgid "Click to download new version in default browser: %s"
 msgstr "Feu clic per descarregar la nova versió al navegador predeterminat: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "L'Orca Slicer necessita una actualització"
 
 msgid "This is the newest version."
@@ -2258,10 +2259,10 @@ msgstr "Convertir des de metres"
 msgid "Restore to meters"
 msgstr "Restaurar a metres"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Ensamblar els objectes seleccionats a un objecte amb diverses peces"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Ensamblar els objectes seleccionats a un objecte amb una sola peça"
 
 msgid "Mesh boolean"
@@ -5747,7 +5748,7 @@ msgstr "Enviar a multidispositiu"
 msgid "Keyboard Shortcuts"
 msgstr "Dreceres de teclat"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Mostrar la llista de les dreceres de teclat"
 
 msgid "Setup Wizard"
@@ -8857,7 +8858,8 @@ msgstr "Associar enllaços web a OrcaSlicer"
 msgid "Developer"
 msgstr "Desenvolupador"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Mode de desenvolupament"
 
 msgid "Skip AMS blacklist check"
@@ -19986,7 +19988,7 @@ msgstr "El nom no pot superar els 40 caràcters."
 msgid "Please find the best line on your plate"
 msgstr "Busqueu la millor línia a la placa"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Busqueu la cantonada amb un grau d'extrusió perfecte"
 
 msgid "Input Value"
@@ -20765,7 +20767,8 @@ msgstr "Crear"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "El proveïdor no està seleccionat, torneu a seleccionar el proveïdor."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "El proveïdor personalitzat no s'ha introduït, introduïu un proveïdor "
 "personalitzat."
@@ -20808,8 +20811,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "El nom de Filament %s que heu creat ja existeix.\n"
 "Si continueu creant-lo, el perfil creat es mostrarà amb el seu nom complet. "
@@ -22837,7 +22840,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Neteja al suport/objectes/farciment\n"
diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po
index 46366b4f15..33b5b0fe87 100644
--- a/localization/i18n/cs/OrcaSlicer_cs.po
+++ b/localization/i18n/cs/OrcaSlicer_cs.po
@@ -1745,7 +1745,8 @@ msgstr "Načítání konfigurace"
 msgid "Click to download new version in default browser: %s"
 msgstr "Kliknutím stáhnete novou verzi ve výchozím prohlížeči: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer potřebuje aktualizaci"
 
 msgid "This is the newest version."
@@ -2220,10 +2221,10 @@ msgstr "Převést z metrů"
 msgid "Restore to meters"
 msgstr "Obnovit na metry"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Sestavit vybrané objekty do objektu s více částmi"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Sestavit vybrané objekty do objektu s jednou částí"
 
 msgid "Mesh boolean"
@@ -5654,7 +5655,7 @@ msgstr "Odeslat na více zařízení"
 msgid "Keyboard Shortcuts"
 msgstr "Klávesové zkratky"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Zobrazit seznam klávesových zkratek"
 
 msgid "Setup Wizard"
@@ -8682,7 +8683,8 @@ msgstr "Přiřadit webové odkazy k OrcaSliceru"
 msgid "Developer"
 msgstr "Developer"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Vývojářský režim"
 
 msgid "Skip AMS blacklist check"
@@ -19403,7 +19405,7 @@ msgstr "Název nesmí přesáhnout 40 znaků."
 msgid "Please find the best line on your plate"
 msgstr "Najděte nejlepší čáru na své desce."
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Najděte roh s ideálním množstvím extruze."
 
 msgid "Input Value"
@@ -20166,7 +20168,8 @@ msgstr "Vytvořit"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Dodavatel není vybrán, prosím vyberte jej znovu."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Není zadán vlastní výrobce, zadejte prosím vlastního výrobce."
 
 msgid ""
@@ -20204,8 +20207,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Název filamentu %s, který jste vytvořili, již existuje.\n"
 "Pokud budete pokračovat, vytvořená předvolba se zobrazí s plným názvem. "
@@ -22159,7 +22162,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Proplach do podpory/objektů/výplně\n"
diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po
index e2b74f5eb3..37b7c1400d 100644
--- a/localization/i18n/de/OrcaSlicer_de.po
+++ b/localization/i18n/de/OrcaSlicer_de.po
@@ -1783,7 +1783,8 @@ msgstr ""
 "Klicken Sie hier, um die neueste Version im Standardbrowser herunterzuladen: "
 "%s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer benötigt ein Upgrade"
 
 msgid "This is the newest version."
@@ -2262,11 +2263,11 @@ msgstr "Von Metern umrechnen"
 msgid "Restore to meters"
 msgstr "Auf Meter zurücksetzen"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr ""
 "Die ausgewählten Objekte zu einem Objekt mit mehreren Teilen zusammenfügen"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Zusammenfügen der ausgewählten Objekte zu einem Objekt mit einem Teil"
 
 msgid "Mesh boolean"
@@ -5800,7 +5801,7 @@ msgstr "An Multi-Gerät senden"
 msgid "Keyboard Shortcuts"
 msgstr "Tastaturkürzel"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Liste der Tastaturkürzel anzeigen"
 
 msgid "Setup Wizard"
@@ -8924,7 +8925,8 @@ msgstr "Web-Links mit OrcaSlicer verknüpfen"
 msgid "Developer"
 msgstr "Entwickler"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Entwicklermodus"
 
 msgid "Skip AMS blacklist check"
@@ -20108,7 +20110,7 @@ msgstr "Der Name darf 40 Zeichen nicht überschreiten."
 msgid "Please find the best line on your plate"
 msgstr "Bitte finden Sie die beste Linie auf Ihrer Platte"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Bitte finden Sie die Ecke mit dem perfekten Extrusionsgrad"
 
 msgid "Input Value"
@@ -20885,7 +20887,8 @@ msgstr "Erstellen"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Hersteller ist nicht ausgewählt, bitte Hersteller erneut auswählen."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "Benutzerdefinierter Hersteller ist nicht eingegeben, bitte "
 "benutzerdefinierten Hersteller eingeben."
@@ -20927,8 +20930,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Der Filamentname %s, den Sie erstellt haben, existiert bereits.\n"
 "Wenn Sie mit der Erstellung fortfahren, wird das erstellte Profil mit seinem "
@@ -22949,7 +22952,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Reinigen in Stützstrukturen/Objekten/Füllungen\n"
diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po
index 74c57e579c..598d026908 100644
--- a/localization/i18n/en/OrcaSlicer_en.po
+++ b/localization/i18n/en/OrcaSlicer_en.po
@@ -1694,8 +1694,8 @@ msgstr ""
 msgid "Click to download new version in default browser: %s"
 msgstr ""
 
-msgid "The Orca Slicer needs an upgrade"
-msgstr "Orca Slicer needs an update"
+msgid "OrcaSlicer needs an update"
+msgstr ""
 
 msgid "This is the newest version."
 msgstr ""
@@ -2135,11 +2135,11 @@ msgstr "Convert from Meters"
 msgid "Restore to meters"
 msgstr "Restore to Meter"
 
-msgid "Assemble the selected objects to an object with multiple parts"
-msgstr "Assemble the selected objects into an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
+msgstr ""
 
-msgid "Assemble the selected objects to an object with single part"
-msgstr "Assemble the selected objects into an object with single part"
+msgid "Assemble the selected objects into an object with single part"
+msgstr ""
 
 msgid "Mesh boolean"
 msgstr ""
@@ -5326,8 +5326,8 @@ msgstr ""
 msgid "Keyboard Shortcuts"
 msgstr ""
 
-msgid "Show the list of the keyboard shortcuts"
-msgstr "Show the list of keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
+msgstr ""
 
 msgid "Setup Wizard"
 msgstr ""
@@ -8152,8 +8152,8 @@ msgstr ""
 msgid "Developer"
 msgstr ""
 
-msgid "Develop mode"
-msgstr "Developer mode"
+msgid "Developer mode"
+msgstr ""
 
 msgid "Skip AMS blacklist check"
 msgstr ""
@@ -16912,7 +16912,7 @@ msgid "Support: generate contact points"
 msgstr ""
 
 msgid "Loading of a model file failed."
-msgstr "Loading of model file failed."
+msgstr ""
 
 msgid "Meshing of a model file failed or no valid shape."
 msgstr ""
@@ -17258,7 +17258,7 @@ msgstr ""
 msgid "Please find the best line on your plate"
 msgstr ""
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Please find the corner with the perfect degree of extrusion"
 
 msgid "Input Value"
@@ -17963,7 +17963,7 @@ msgstr ""
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Vendor is not selected; please reselect vendor."
 
-msgid "Custom vendor is not input, please input custom vendor."
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Custom vendor missing; please input custom vendor."
 
 msgid ""
@@ -17996,8 +17996,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "The Filament name %s you created already exists.\n"
 "If you continue, the preset created will be displayed with its full name. Do "
@@ -19639,7 +19639,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Flush into support/objects/infill\n"
diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po
index 4951eadd34..5593321f8f 100644
--- a/localization/i18n/es/OrcaSlicer_es.po
+++ b/localization/i18n/es/OrcaSlicer_es.po
@@ -1787,7 +1787,8 @@ msgid "Click to download new version in default browser: %s"
 msgstr ""
 "Haga clic para descargar la nueva versión en el navegador por defecto: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer necesita una actualización"
 
 msgid "This is the newest version."
@@ -2269,10 +2270,10 @@ msgstr "Convertir de metros"
 msgid "Restore to meters"
 msgstr "Restaurar a metros"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Ensamblar los objetos seleccionados en un objeto con múltiples piezas"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Ensamblar los objetos seleccionados en un objeto de una sola pieza"
 
 msgid "Mesh boolean"
@@ -5787,7 +5788,7 @@ msgstr "Enviar a multidispositivo"
 msgid "Keyboard Shortcuts"
 msgstr "Atajos de teclado"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Mostrar la lista de los atajos de teclado"
 
 msgid "Setup Wizard"
@@ -8904,7 +8905,7 @@ msgstr "Asociar enlaces web a OrcaSlicer"
 msgid "Developer"
 msgstr "Desarrollador"
 
-msgid "Develop mode"
+msgid "Developer mode"
 msgstr "Modo de desarrollador"
 
 msgid "Skip AMS blacklist check"
@@ -20075,7 +20076,7 @@ msgstr "El nombre no puede exceder de 40 caracteres."
 msgid "Please find the best line on your plate"
 msgstr "Por favor encuentre la mejor línea en su cama"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Encuentre la esquina con el grado de extrusión perfecto"
 
 msgid "Input Value"
@@ -20859,7 +20860,8 @@ msgid "Vendor is not selected, please reselect vendor."
 msgstr ""
 "El fabricante no ha sido seleccionado, por favor, seleccione el fabricante."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "El fabricante personalizado no ha sido introducido, por favor introdúzcalo."
 
@@ -20901,8 +20903,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "El nombre del filamento %s que ha creado ya existe.\n"
 "Si continúa, el perfil creado se mostrará con su nombre completo. ¿Desea "
@@ -22938,7 +22940,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Descarga en soporte/objetos/relleno\n"
diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po
index 42336db6a9..b04f8e0f24 100644
--- a/localization/i18n/fr/OrcaSlicer_fr.po
+++ b/localization/i18n/fr/OrcaSlicer_fr.po
@@ -1800,7 +1800,8 @@ msgstr ""
 "Cliquez pour télécharger la nouvelle version dans le navigateur par défaut : "
 "%s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer a besoin d’être mis à jour"
 
 msgid "This is the newest version."
@@ -2282,10 +2283,10 @@ msgstr "Convertir en mètre"
 msgid "Restore to meters"
 msgstr "Restaurer au compteur"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Assembler les objets sélectionnés à un objet en plusieurs parties"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Assembler les objets sélectionnés à un objet en une seule pièce"
 
 msgid "Mesh boolean"
@@ -5797,7 +5798,7 @@ msgstr "Envoyer à plusieurs appareils"
 msgid "Keyboard Shortcuts"
 msgstr "Raccourcis Clavier"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Afficher la liste des raccourcis clavier"
 
 msgid "Setup Wizard"
@@ -8940,7 +8941,8 @@ msgstr "Associer des liens web à OrcaSlicer"
 msgid "Developer"
 msgstr "Développeur"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Mode Développeur"
 
 msgid "Skip AMS blacklist check"
@@ -20269,7 +20271,7 @@ msgstr "Le nom ne peut pas dépasser 40 caractères."
 msgid "Please find the best line on your plate"
 msgstr "Veuillez trouver la meilleure ligne sur votre plateau"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Veuillez trouver l'angle avec le degré d'extrusion parfait"
 
 msgid "Input Value"
@@ -21055,7 +21057,8 @@ msgid "Vendor is not selected, please reselect vendor."
 msgstr ""
 "Le fournisseur n’est pas sélectionné, veuillez le sélectionner à nouveau."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "Le fournisseur personnalisé n’est pas saisi, veuillez saisir le fournisseur "
 "personnalisé."
@@ -21100,8 +21103,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Le nom de filament %s que vous avez créé existe déjà.\n"
 "Si vous continuez la création, le réglage créé sera affiché avec son nom "
@@ -23162,7 +23165,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Purger dans les supports/les objets/le remplissage\n"
diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po
index dffa28be51..6fe80a24fe 100644
--- a/localization/i18n/hu/OrcaSlicer_hu.po
+++ b/localization/i18n/hu/OrcaSlicer_hu.po
@@ -1766,7 +1766,8 @@ msgstr "Konfiguráció betöltése"
 msgid "Click to download new version in default browser: %s"
 msgstr "Kattints az új verzió letöltéséhez az alapértelmezett böngészőben: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "A Orca Slicert frissíteni kell"
 
 msgid "This is the newest version."
@@ -2241,10 +2242,10 @@ msgstr "Átváltás méterről"
 msgid "Restore to meters"
 msgstr "Visszaállítás méterre"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Összeállítja a kijelölt objektumot egy több részből álló objektummá"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr ""
 "Összeállítja a kijelölt objektumokat egy egyetlen részből álló objektummá"
 
@@ -5727,7 +5728,7 @@ msgstr "Küldés több eszközre"
 msgid "Keyboard Shortcuts"
 msgstr "Gyorsbillentyűk"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Gyorsgombok listájának megjelenítése"
 
 msgid "Setup Wizard"
@@ -8794,7 +8795,8 @@ msgstr "Webhivatkozások társítása OrcaSlicerhez"
 msgid "Developer"
 msgstr "Fejlesztő"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Fejlesztői mód"
 
 msgid "Skip AMS blacklist check"
@@ -19847,7 +19849,7 @@ msgstr "A név nem haladhatja meg a 40 karaktert."
 msgid "Please find the best line on your plate"
 msgstr "Keresd meg a legjobb vonalat a tálcán"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Keresd meg a tökéletesen extrudált sarkot"
 
 msgid "Input Value"
@@ -20617,10 +20619,12 @@ msgstr "Filamentbeállítás"
 msgid "Create"
 msgstr "Létrehoz"
 
+#, fuzzy
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Vendor is not selected; please reselect vendor."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Custom vendor missing; please input custom vendor."
 
 msgid ""
@@ -20657,8 +20661,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "A(z) %s filamentnév már létezik.\n"
 "Ha folytatod, az új beállítás a teljes nevével fog megjelenni. Folytatod?"
@@ -22657,7 +22661,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Öblítés támaszokba/objektumokba/kitöltésbe\n"
diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po
index ae9e26387a..4b77ae8d67 100644
--- a/localization/i18n/it/OrcaSlicer_it.po
+++ b/localization/i18n/it/OrcaSlicer_it.po
@@ -1791,7 +1791,8 @@ msgstr "Caricamento configurazione"
 msgid "Click to download new version in default browser: %s"
 msgstr "Fai clic per scaricare la nuova versione nel browser predefinito: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "OrcaSlicer necessita di aggiornamento"
 
 msgid "This is the newest version."
@@ -2267,10 +2268,10 @@ msgstr "Converti da metri"
 msgid "Restore to meters"
 msgstr "Ripristina in metri"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Assembla gli oggetti selezionati in un oggetto con più parti"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Assembla gli oggetti selezionati in un oggetto con una singola parte"
 
 msgid "Mesh boolean"
@@ -5779,7 +5780,7 @@ msgstr "Invia a più dispositivi"
 msgid "Keyboard Shortcuts"
 msgstr "Scorciatoie da tastiera"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Mostra l'elenco delle scorciatoie da tastiera"
 
 msgid "Setup Wizard"
@@ -8871,7 +8872,8 @@ msgstr "Associa i collegamenti web ad OrcaSlicer"
 msgid "Developer"
 msgstr "Sviluppatore"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Modalità sviluppatore"
 
 msgid "Skip AMS blacklist check"
@@ -20126,7 +20128,7 @@ msgstr "Il nome non può superare i 40 caratteri."
 msgid "Please find the best line on your plate"
 msgstr "Trova la linea migliore nel tuo piatto"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Individua l'angolo con il grado di estrusione ideale"
 
 msgid "Input Value"
@@ -20911,7 +20913,8 @@ msgstr ""
 "Il produttore non è stato selezionato, si prega di selezionare nuovamente il "
 "produttore."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "Il produttore personalizzato non è stato inserito, si prega di inserire il "
 "fornitore personalizzato."
@@ -20955,8 +20958,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Il nome del filamento %s che hai creato esiste già.\n"
 "Se continui nella creazione, il profilo creato verrà visualizzato con il suo "
@@ -22983,7 +22986,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Spurga nei supporti/oggetti/riempimenti\n"
diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po
index ba6af3b17a..675dec6d9d 100644
--- a/localization/i18n/ja/OrcaSlicer_ja.po
+++ b/localization/i18n/ja/OrcaSlicer_ja.po
@@ -1753,7 +1753,8 @@ msgstr "構成を読込み中"
 msgid "Click to download new version in default browser: %s"
 msgstr "新バージョンをダウンロードするにはクリックしてください: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer をアップデートする必要があります"
 
 msgid "This is the newest version."
@@ -2220,10 +2221,10 @@ msgstr "メートルから変換"
 msgid "Restore to meters"
 msgstr "メータル単位に復元"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "選択したオブジェクトを一つオブジェクトに組み立てます（複数パーツ）"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "選択したオブジェクトを一つオブジェクトに組み立てます（単パーツ）"
 
 msgid "Mesh boolean"
@@ -5605,7 +5606,7 @@ msgstr "マルチデバイスに送信"
 msgid "Keyboard Shortcuts"
 msgstr "ショートカット"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "ショートカット一覧を表示"
 
 msgid "Setup Wizard"
@@ -8608,7 +8609,8 @@ msgstr "ウェブリンクをOrcaSlicerに関連付け"
 msgid "Developer"
 msgstr "開発者"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "開発者モード"
 
 msgid "Skip AMS blacklist check"
@@ -18018,7 +18020,7 @@ msgstr ""
 msgid "Please find the best line on your plate"
 msgstr ""
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr ""
 
 msgid "Input Value"
@@ -18738,7 +18740,8 @@ msgstr "作成"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "ベンダーが選択されていません。ベンダーを再選択してください。"
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "カスタムベンダーが入力されていません。カスタムベンダーを入力してください。"
 
@@ -18772,8 +18775,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 
 msgid "Some existing presets have failed to be created, as follows:\n"
@@ -20448,7 +20451,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "サポート/オブジェクト/インフィルにフラッシュ\n"
diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po
index d8f1a9a476..0d44ec2237 100644
--- a/localization/i18n/ko/OrcaSlicer_ko.po
+++ b/localization/i18n/ko/OrcaSlicer_ko.po
@@ -1749,7 +1749,8 @@ msgstr "구성 파일 로드 중"
 msgid "Click to download new version in default browser: %s"
 msgstr "기본 브라우저에서 새 버전을 다운로드하려면 클릭: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer 업그레이드가 필요합니다"
 
 msgid "This is the newest version."
@@ -2217,10 +2218,10 @@ msgstr "미터에서 변환"
 msgid "Restore to meters"
 msgstr "미터로 복원"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "선택한 객체를 여러 부품이 있는 객체로 조립"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "선택한 객체를 단일 부품이 있는 객체로 조립"
 
 msgid "Mesh boolean"
@@ -5561,7 +5562,7 @@ msgstr "여러 장치로 보내기"
 msgid "Keyboard Shortcuts"
 msgstr "키보드 단축키"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "키보드 단축키 목록 표시"
 
 msgid "Setup Wizard"
@@ -8485,7 +8486,8 @@ msgstr "OrcaSlicer에 웹 링크 연결"
 msgid "Developer"
 msgstr ""
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "개발자 모드"
 
 msgid "Skip AMS blacklist check"
@@ -18560,7 +18562,7 @@ msgstr "이름은 40자를 초과할 수 없습니다."
 msgid "Please find the best line on your plate"
 msgstr "당신의 플레이트에서 가장 좋은 선을 찾아보세요"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "완벽한 돌출 정도를 가진 코너를 찾아주세요."
 
 msgid "Input Value"
@@ -19286,7 +19288,8 @@ msgstr "생성"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "공급업체가 선택되지 않았습니다. 공급업체를 다시 선택하세요."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "사용자 정의 공급업체가 입력되지 않았습니다. 사용자 정의 공급업체를 입력해 주"
 "세요."
@@ -19324,8 +19327,8 @@ msgstr "아직 프린터나 사전 설정을 선택하지 않았습니다. 하
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "생성한 필라멘트 이름 %s이(가) 이미 존재합니다.\n"
 "계속 생성하면 생성된 사전 설정이 전체 이름과 함께 표시됩니다. 계속하시겠습니"
@@ -21143,7 +21146,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "서포트/객체/채우기에 내보내기\n"
diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po
index e0ae114829..e47c428a4f 100644
--- a/localization/i18n/lt/OrcaSlicer_lt.po
+++ b/localization/i18n/lt/OrcaSlicer_lt.po
@@ -1764,7 +1764,8 @@ msgid "Click to download new version in default browser: %s"
 msgstr ""
 "Spustelėkite, kad atsisiųstumėte naują versiją numatytoje naršyklėje: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "OrcaSlicer reikia atnaujinti"
 
 msgid "This is the newest version."
@@ -2241,10 +2242,10 @@ msgstr "Konvertuoti iš metrų"
 msgid "Restore to meters"
 msgstr "Grąžinti į metrus"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Sujungti pasirinktus objektus į daugiadalį objektą"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Sujungti pasirinktus objektus į vienadalį objektą"
 
 msgid "Mesh boolean"
@@ -5710,7 +5711,7 @@ msgstr "Siųsti į multiįrenginį"
 msgid "Keyboard Shortcuts"
 msgstr "Klaviatūros nuorodos"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Rodyti sparčiųjų klavišų sąrašą"
 
 msgid "Setup Wizard"
@@ -8774,7 +8775,8 @@ msgstr "Susieti interneto nuorodas su Orca Slicer"
 msgid "Developer"
 msgstr "Developer"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Kūrėjo režimas"
 
 msgid "Skip AMS blacklist check"
@@ -19714,7 +19716,7 @@ msgstr "Pavadinimas negali būti ilgesnis nei 40 simbolių."
 msgid "Please find the best line on your plate"
 msgstr "Raskite geriausią liniją ant pagrindo"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Raskite kampą su tobulu išspaudimo laipsniu"
 
 msgid "Input Value"
@@ -20485,7 +20487,8 @@ msgstr "Sukurti"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Pardavėjas nepasirinktas, pasirinkite pardavėją iš naujo."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Pasirinktinis pardavėjas neįvestas, įveskite pasirinktinį pardavėją."
 
 msgid ""
@@ -20524,8 +20527,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Sukurtas gijos pavadinimas %s jau egzistuoja.\n"
 "Jei toliau kursite, bus rodomas visas sukurto išankstinio nustatymo "
@@ -22513,7 +22516,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Išspausti į atramą/objektus/užpildą \n"
diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po
index 758d0bf066..532d073626 100644
--- a/localization/i18n/nl/OrcaSlicer_nl.po
+++ b/localization/i18n/nl/OrcaSlicer_nl.po
@@ -1756,7 +1756,8 @@ msgid "Click to download new version in default browser: %s"
 msgstr ""
 "Klik hier om de nieuwe versie te downloaden in je standaard browser: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer heeft een upgrade nodig"
 
 msgid "This is the newest version."
@@ -2228,11 +2229,11 @@ msgstr "Omzetten vanuit meter"
 msgid "Restore to meters"
 msgstr "Terugzetten naar meter"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr ""
 "Monteer de geselecteerde objecten tot een object bestaande uit meerdere delen"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr ""
 "Monteer de geselecteerde objecten tot een object bestaande uit 1 onderdeel"
 
@@ -5697,7 +5698,7 @@ msgstr "Naar meerdere apparaten verzenden"
 msgid "Keyboard Shortcuts"
 msgstr "Sneltoesten"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Toon lijst met sneltoetsen"
 
 msgid "Setup Wizard"
@@ -8780,7 +8781,8 @@ msgstr "Koppel weblinks aan OrcaSlicer"
 msgid "Developer"
 msgstr "Ontwikkelaar"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Ontwikkelmodus"
 
 msgid "Skip AMS blacklist check"
@@ -19714,7 +19716,7 @@ msgstr "De naam mag niet langer zijn dan 40 tekens."
 msgid "Please find the best line on your plate"
 msgstr "Zoek de beste regel op je bord"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Zoek de hoek met de perfecte extrusiegraad"
 
 msgid "Input Value"
@@ -20480,10 +20482,12 @@ msgstr "Filament voorinstelling"
 msgid "Create"
 msgstr "Creëren"
 
+#, fuzzy
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Vendor is not selected; please reselect vendor."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Custom vendor missing; please input custom vendor."
 
 msgid ""
@@ -20521,8 +20525,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "De filamentnaam %s die je hebt gemaakt, bestaat al.\n"
 "Als u doorgaat, wordt de gemaakte voorinstelling weergegeven met de "
@@ -22488,7 +22492,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Flush in support/voorwerpen/infill\n"
diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po
index 8de15512c2..8e81b05204 100644
--- a/localization/i18n/pl/OrcaSlicer_pl.po
+++ b/localization/i18n/pl/OrcaSlicer_pl.po
@@ -1755,7 +1755,8 @@ msgstr "Ładowanie konfiguracji"
 msgid "Click to download new version in default browser: %s"
 msgstr "Kliknij, aby pobrać nową wersję w domyślnej przeglądarce: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer wymaga uaktualnienia"
 
 msgid "This is the newest version."
@@ -2215,10 +2216,10 @@ msgstr "Konwertuj z metra"
 msgid "Restore to meters"
 msgstr "Przywróć do metra"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Zmontuj wybrane obiekty w obiekt wieloczęściowy"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Zmontuj wybrane obiekty w jedną część"
 
 msgid "Mesh boolean"
@@ -5552,7 +5553,7 @@ msgstr "Wyślij do wielu urządzeń"
 msgid "Keyboard Shortcuts"
 msgstr "Skróty klawiszowe"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Pokaż listę skrótów klawiszowych"
 
 msgid "Setup Wizard"
@@ -8518,7 +8519,8 @@ msgstr "Powiązania odnośników z OrcaSlicer"
 msgid "Developer"
 msgstr ""
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Tryb deweloperski"
 
 msgid "Skip AMS blacklist check"
@@ -19089,7 +19091,7 @@ msgstr "Nazwa nie może przekraczać 40 znaków."
 msgid "Please find the best line on your plate"
 msgstr "Znajdź najlepszą linię na swojej płycie"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Znajdź róg z idealnym stopniem ekstruzji"
 
 msgid "Input Value"
@@ -19820,7 +19822,8 @@ msgstr "Utwórz"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Dostawca nie jest wybrany, proszę ponownie wybrać producenta."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "Nie wprowadzono dostawcy, proszę wprowadzić niestandardowego producenta."
 
@@ -19860,8 +19863,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Nazwa filamentu %s, którą utworzyłeś, już istnieje.\n"
 "Jeśli będziesz kontynuować, utworzony preset będzie wyświetlany pod swoją "
@@ -21739,7 +21742,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Czyszczenie do podpór/obiektów/wypełnienia\n"
diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
index 221a4e0e77..4139d93e2e 100644
--- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
+++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po
@@ -1778,7 +1778,7 @@ msgstr "Carregando configuração"
 msgid "Click to download new version in default browser: %s"
 msgstr "Clique para baixar a nova versão no navegador padrão: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+msgid "OrcaSlicer needs an update"
 msgstr "O OrcaSlicer precisa de uma atualização"
 
 msgid "This is the newest version."
@@ -2254,10 +2254,10 @@ msgstr "Converter de metros"
 msgid "Restore to meters"
 msgstr "Restaurar para metros"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Montar os objetos selecionados em um objeto com várias peças"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Montar os objetos selecionados em um objeto com uma única peça"
 
 msgid "Mesh boolean"
@@ -5745,8 +5745,8 @@ msgstr "Enviar para multi-dispositivo"
 msgid "Keyboard Shortcuts"
 msgstr "Atalhos de Teclado"
 
-msgid "Show the list of the keyboard shortcuts"
-msgstr "Mostrar a lista dos atalhos de teclado"
+msgid "Show the list of keyboard shortcuts"
+msgstr "Mostrar a lista de atalhos de teclado"
 
 msgid "Setup Wizard"
 msgstr "Assistente de Configuração"
@@ -8832,8 +8832,8 @@ msgstr "Associar links da web ao OrcaSlicer"
 msgid "Developer"
 msgstr "Desenvolvedor"
 
-msgid "Develop mode"
-msgstr "Modo de Desenvolvimento"
+msgid "Developer mode"
+msgstr "Modo de Desenvolvedor"
 
 msgid "Skip AMS blacklist check"
 msgstr "Pular verificação de lista negra AMS"
@@ -19906,8 +19906,8 @@ msgstr "O nome não pode ter mais de 40 caracteres."
 msgid "Please find the best line on your plate"
 msgstr "Por favor, encontre a melhor linha em sua placa"
 
-msgid "Please find the corner with perfect degree of extrusion"
-msgstr "Por favor, encontre o canto com grau perfeito de extrusão"
+msgid "Please find the corner with the perfect degree of extrusion"
+msgstr "Por favor, encontre o canto com o grau perfeito de extrusão"
 
 msgid "Input Value"
 msgstr "Valor de entrada"
@@ -20677,11 +20677,11 @@ msgid "Create"
 msgstr "Criar"
 
 msgid "Vendor is not selected, please reselect vendor."
-msgstr "Fornecedor não está selecionado, por favor reselecione o fornecedor."
+msgstr "O fornecedor não está selecionado, por favor reselecione o fornecedor."
 
-msgid "Custom vendor is not input, please input custom vendor."
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
-"O fornecedor personalizado não foi inserido, por favor insira o fornecedor "
+"O fornecedor personalizado está faltando, por favor insira o fornecedor "
 "personalizado."
 
 msgid ""
@@ -20721,12 +20721,12 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "O nome do Filamento %s que você criou já existe.\n"
-"Se você continuar a criação, a predefinição criada será exibida com o seu "
-"nome completo. Você quer continuar?"
+"Se você continuar, a predefinição criada será exibida com o seu nome "
+"completo. Você quer continuar?"
 
 msgid "Some existing presets have failed to be created, as follows:\n"
 msgstr ""
@@ -22742,11 +22742,11 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Purga no suporte/objetos/preenchimento\n"
-"Você sabia que pode economizar o filamento desperdiçado ao purgar nos "
+"Você sabia que pode reduzir o filamento desperdiçado ao purgar nos "
 "suportes/objetos/preenchimento durante a troca de filamento?"
 
 #: resources/data/hints.ini: [hint:Improve strength]
diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po
index 43b04bf565..4e03817756 100644
--- a/localization/i18n/ru/OrcaSlicer_ru.po
+++ b/localization/i18n/ru/OrcaSlicer_ru.po
@@ -1812,7 +1812,8 @@ msgstr "Загрузка настроек"
 msgid "Click to download new version in default browser: %s"
 msgstr "Нажмите «Скачать» для загрузки версии %s в вашем основном браузере."
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer нуждается в обновлении"
 
 msgid "This is the newest version."
@@ -2291,11 +2292,11 @@ msgstr "Преобразовать миллиметры в дюймы"
 msgid "Restore to meters"
 msgstr "Восстановить в миллиметры"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr ""
 "Объединение выбранных объектов в модель, состоящую из нескольких частей"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Объединение выбранных моделей в единую"
 
 msgid "Mesh boolean"
@@ -5891,7 +5892,7 @@ msgstr "Отправить на несколько устройств"
 msgid "Keyboard Shortcuts"
 msgstr "Горячие клавиши"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Показать список сочетаний клавиш"
 
 msgid "Setup Wizard"
@@ -9018,7 +9019,8 @@ msgstr "Открытие ссылок в OrcaSlicer"
 msgid "Developer"
 msgstr "Разработка"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Режим разработчика"
 
 msgid "Skip AMS blacklist check"
@@ -20541,7 +20543,7 @@ msgstr "Максимальная длина имени 40 символов."
 msgid "Please find the best line on your plate"
 msgstr "Пожалуйста, найдите лучшую линию на столе"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Пожалуйста, найдите угол с идеальной экструзией"
 
 msgid "Input Value"
@@ -21322,7 +21324,8 @@ msgstr "Создать"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Не выбран производитель, пожалуйста, выберите его заново."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Не задан производитель, пожалуйста, введите производителя."
 
 msgid ""
@@ -21361,8 +21364,8 @@ msgstr "Выберите хотя бы один принтер или профи
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Материал с таким именем %s уже существует.\n"
 "Если продолжить создание, то созданный профиль будет отображаться с полным "
@@ -23364,7 +23367,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Прочистка в поддержку/модель/заполнение\n"
diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po
index e4afd775dc..c76e321357 100644
--- a/localization/i18n/sv/OrcaSlicer_sv.po
+++ b/localization/i18n/sv/OrcaSlicer_sv.po
@@ -1743,7 +1743,8 @@ msgstr "Konfigurationen laddas"
 msgid "Click to download new version in default browser: %s"
 msgstr "Tryck på ladda ner ny version ifrån standard webbläsaren: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer behöver uppdateras"
 
 msgid "This is the newest version."
@@ -2216,10 +2217,10 @@ msgstr "Konvertera ifrån meter"
 msgid "Restore to meters"
 msgstr "Återställ till meter"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Montera de valda objekten till ett objekt med multipla delar"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Montera de valda objekten till ett objekt med en enda del"
 
 msgid "Mesh boolean"
@@ -5666,7 +5667,7 @@ msgstr "Send to Multi-device"
 msgid "Keyboard Shortcuts"
 msgstr "Kortkommando"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Visa lista över kortkommandon"
 
 msgid "Setup Wizard"
@@ -8694,7 +8695,8 @@ msgstr "Associate web links to OrcaSlicer"
 msgid "Developer"
 msgstr "Utvecklare"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Utvecklingsläge"
 
 msgid "Skip AMS blacklist check"
@@ -19515,7 +19517,7 @@ msgstr "Namnet får inte innehålla mer än 40 tecken."
 msgid "Please find the best line on your plate"
 msgstr "Hitta den bästa linjen på din platta."
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Hitta hörnet med den perfekta graden av extrudering"
 
 msgid "Input Value"
@@ -20277,10 +20279,12 @@ msgstr "Filament inställning"
 msgid "Create"
 msgstr "Skapa"
 
+#, fuzzy
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Vendor is not selected; please reselect vendor."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Custom vendor missing; please input custom vendor."
 
 msgid ""
@@ -20317,8 +20321,8 @@ msgstr "Du har ännu inte valt någon printer eller inställning. Välj minst en
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Filamentnamnet %s som du skapade finns redan.\n"
 "Om du fortsätter kommer den skapade inställningen att visas med sitt "
@@ -22279,7 +22283,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Rensa in i support/objekt/ifyllnad\n"
diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po
index 7213477c1f..2a155cd693 100644
--- a/localization/i18n/tr/OrcaSlicer_tr.po
+++ b/localization/i18n/tr/OrcaSlicer_tr.po
@@ -1679,7 +1679,8 @@ msgstr "Yapılandırma yükleniyor"
 msgid "Click to download new version in default browser: %s"
 msgstr "Yeni sürümü varsayılan tarayıcıda indirmek için tıklayın: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Dilimleyicinin yükseltilmesi gerekiyor"
 
 msgid "This is the newest version."
@@ -2129,10 +2130,10 @@ msgstr "Metreden dönüştür"
 msgid "Restore to meters"
 msgstr "Metreye geri çevir"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Seçilen nesneleri birden çok parçalı bir nesneyle birleştirin"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Seçilen nesneleri tek parçalı bir nesneye birleştirin"
 
 msgid "Mesh boolean"
@@ -5296,7 +5297,7 @@ msgstr "Çoklu cihaza gönder"
 msgid "Keyboard Shortcuts"
 msgstr "Klavye kısayolları"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Klavye kısayollarının listesini göster"
 
 msgid "Setup Wizard"
@@ -8077,7 +8078,8 @@ msgstr "Web bağlantılarını OrcaSlicer ile ilişkilendirin"
 msgid "Developer"
 msgstr "Geliştirici"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Geliştirici Modu"
 
 msgid "Skip AMS blacklist check"
@@ -17203,7 +17205,7 @@ msgstr "Ad 40 karakteri aşamaz."
 msgid "Please find the best line on your plate"
 msgstr "Lütfen plakadaki en iyi çizgiyi bulun"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Lütfen mükemmel ekstrüzyon derecesine sahip köşeyi bulun"
 
 msgid "Input Value"
@@ -17940,7 +17942,8 @@ msgstr "Oluştur"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Satıcı seçilmedi, lütfen satıcıyı yeniden seçin."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "Özel satıcı girişi yapılmaz, lütfen özel satıcıyı girin."
 
 msgid ""
@@ -17970,8 +17973,8 @@ msgstr "Henüz bir yazıcı veya ön ayar seçmediniz. Lütfen en az birini seç
 
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Oluşturduğunuz %s Filament adı zaten mevcut.\n"
 "Oluşturmaya devam ederseniz oluşturulan ön ayar tam adıyla görüntülenecektir. Devam etmek istiyor musun?"
@@ -19658,7 +19661,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Desteğe/nesnelere/dolguya hizalayın\n"
diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po
index 23737951fa..5b1c8ee04a 100644
--- a/localization/i18n/uk/OrcaSlicer_uk.po
+++ b/localization/i18n/uk/OrcaSlicer_uk.po
@@ -1757,7 +1757,8 @@ msgid "Click to download new version in default browser: %s"
 msgstr ""
 "Натисніть OK, щоб завантажити останню версію в стандартному браузері: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer потребує оновлення"
 
 msgid "This is the newest version."
@@ -2217,10 +2218,10 @@ msgstr "Перетворити з метричної"
 msgid "Restore to meters"
 msgstr "Відновити в метричну"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Зібрати вибрані об'єкти в об'єкт з кількома частинами"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Зібрати вибрані об'єкти в об'єкт в одне ціле"
 
 msgid "Mesh boolean"
@@ -5552,7 +5553,7 @@ msgstr "Відправити на багато пристроїв"
 msgid "Keyboard Shortcuts"
 msgstr "Гарячі клавіші"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Показати список гарячих клавіш"
 
 msgid "Setup Wizard"
@@ -8545,7 +8546,8 @@ msgstr "Асоціювати веб-посилання з OrcaSlicer"
 msgid "Developer"
 msgstr ""
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Режим розробки"
 
 msgid "Skip AMS blacklist check"
@@ -19046,7 +19048,7 @@ msgstr "Ім’я не може перевищувати 40 символів."
 msgid "Please find the best line on your plate"
 msgstr "Будь ласка, знайдіть найкращу лінію на вашій пластині"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Будь ласка, знайдіть кут з ідеальним ступенем витіснення"
 
 msgid "Input Value"
@@ -19776,7 +19778,8 @@ msgstr "Створити"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Виробник не вибраний. Будь ласка, перевиберіть виробника."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "Власного виробника не введено. Будь ласка, введіть інформацію про власного "
 "виробника."
@@ -19818,8 +19821,8 @@ msgstr ""
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Назва філаменту %s, яку ви створили, вже існує.\n"
 "Якщо ви продовжите створення, новий набір параметрів буде відображений з "
@@ -21701,7 +21704,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Промивати в підтримки/об'єкти/заповнення\n"
diff --git a/localization/i18n/vi/OrcaSlicer_vi.po b/localization/i18n/vi/OrcaSlicer_vi.po
index 11c089e45c..8b430b906e 100644
--- a/localization/i18n/vi/OrcaSlicer_vi.po
+++ b/localization/i18n/vi/OrcaSlicer_vi.po
@@ -1742,7 +1742,8 @@ msgstr "Đang tải cấu hình"
 msgid "Click to download new version in default browser: %s"
 msgstr "Nhấn để tải phiên bản mới trong trình duyệt mặc định: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer cần nâng cấp"
 
 msgid "This is the newest version."
@@ -2212,10 +2213,10 @@ msgstr "Chuyển đổi từ mét"
 msgid "Restore to meters"
 msgstr "Khôi phục về mét"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "Lắp ráp các vật thể đã chọn thành vật thể có nhiều phần"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "Lắp ráp các vật thể đã chọn thành vật thể có một phần"
 
 msgid "Mesh boolean"
@@ -5627,7 +5628,7 @@ msgstr "Gửi đến nhiều thiết bị"
 msgid "Keyboard Shortcuts"
 msgstr "Phím tắt"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "Hiện danh sách phím tắt"
 
 msgid "Setup Wizard"
@@ -8634,10 +8635,12 @@ msgstr "Nếu được bật, đặt OrcaSlicer làm ứng dụng mặc định
 msgid "Associate web links to OrcaSlicer"
 msgstr "Liên kết liên kết web với OrcaSlicer"
 
+#, fuzzy
 msgid "Developer"
 msgstr "Developer"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "Chế độ phát triển"
 
 msgid "Skip AMS blacklist check"
@@ -19290,7 +19293,7 @@ msgstr "Tên không thể vượt quá 40 ký tự."
 msgid "Please find the best line on your plate"
 msgstr "Vui lòng tìm đường tốt nhất trên bàn của bạn"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "Vui lòng tìm góc có mức độ đùn hoàn hảo"
 
 msgid "Input Value"
@@ -20054,7 +20057,8 @@ msgstr "Tạo"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "Nhà cung cấp không được chọn, vui lòng chọn lại nhà cung cấp."
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr ""
 "Nhà cung cấp tùy chỉnh không được nhập, vui lòng nhập nhà cung cấp tùy chỉnh."
 
@@ -20092,8 +20096,8 @@ msgstr "Bạn chưa chọn máy in hoặc cài đặt sẵn. Vui lòng chọn í
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "Tên filament %s bạn đã tạo đã tồn tại.\n"
 "Nếu bạn tiếp tục tạo, cài đặt sẵn được tạo sẽ được hiển thị với tên đầy đủ "
@@ -22051,7 +22055,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "Xả vào support/đối tượng/infill\n"
diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
index 9d662abb3c..602b35c0a4 100644
--- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
+++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
@@ -1720,7 +1720,8 @@ msgstr "正在加载配置"
 msgid "Click to download new version in default browser: %s"
 msgstr "在默认浏览器中点击下载最新版本: %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "逆戟鲸切片器需要进行升级"
 
 msgid "This is the newest version."
@@ -2179,10 +2180,10 @@ msgstr "从米转换"
 msgid "Restore to meters"
 msgstr "恢复到米"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "组合所选对象为一个多零件对象"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "组合所选对象为一个单零件对象"
 
 msgid "Mesh boolean"
@@ -5439,7 +5440,7 @@ msgstr "发送到多设备"
 msgid "Keyboard Shortcuts"
 msgstr "快捷键"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "显示快捷键列表"
 
 msgid "Setup Wizard"
@@ -8291,7 +8292,8 @@ msgstr "将网页链接关联到OrcaSlicer"
 msgid "Developer"
 msgstr "开发者"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "开发者模式"
 
 msgid "Skip AMS blacklist check"
@@ -18064,7 +18066,7 @@ msgstr "名称不能超过40个字符。"
 msgid "Please find the best line on your plate"
 msgstr "请在您的打印板上找到最佳线条"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "请找到具有完美挤出度的转角"
 
 msgid "Input Value"
@@ -18811,7 +18813,8 @@ msgstr "创建"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "未选择供应商，请重新选择供应商。"
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "未输入自定义供应商，请输入自定义供应商。"
 
 msgid ""
@@ -18843,8 +18846,8 @@ msgstr "您还没有选择打印机或预设。请至少选择一个。"
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "您创建的耗材名称 %s 有重名。\n"
 "如果您继续创建，您创建的预设将以全名显示。您想继续吗？"
@@ -20650,7 +20653,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "冲刷到支撑/对象/填充中\n"
diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
index 98997731cb..2da1019e0a 100644
--- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
+++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
@@ -1725,7 +1725,8 @@ msgstr "正在讀取設定檔"
 msgid "Click to download new version in default browser: %s"
 msgstr "在預設瀏覽器中開啟頁面下載最新版本： %s"
 
-msgid "The Orca Slicer needs an upgrade"
+#, fuzzy
+msgid "OrcaSlicer needs an update"
 msgstr "Orca Slicer 需要進行升級"
 
 msgid "This is the newest version."
@@ -2186,10 +2187,10 @@ msgstr "從公尺轉換"
 msgid "Restore to meters"
 msgstr "恢復到公尺"
 
-msgid "Assemble the selected objects to an object with multiple parts"
+msgid "Assemble the selected objects into an object with multiple parts"
 msgstr "組合所選物件為一個多零件物件"
 
-msgid "Assemble the selected objects to an object with single part"
+msgid "Assemble the selected objects into an object with single part"
 msgstr "組合所選物件為一個單零件物件"
 
 msgid "Mesh boolean"
@@ -5508,7 +5509,7 @@ msgstr "傳送給多個列印設備"
 msgid "Keyboard Shortcuts"
 msgstr "快捷鍵"
 
-msgid "Show the list of the keyboard shortcuts"
+msgid "Show the list of keyboard shortcuts"
 msgstr "顯示快捷鍵清單"
 
 msgid "Setup Wizard"
@@ -8382,7 +8383,8 @@ msgstr "將網頁連結關聯到 OrcaSlicer"
 msgid "Developer"
 msgstr "開發者"
 
-msgid "Develop mode"
+#, fuzzy
+msgid "Developer mode"
 msgstr "開發者模式"
 
 msgid "Skip AMS blacklist check"
@@ -18203,7 +18205,7 @@ msgstr "名稱不能超過40個字元。"
 msgid "Please find the best line on your plate"
 msgstr "請在您的列印板上找到最佳線條"
 
-msgid "Please find the corner with perfect degree of extrusion"
+msgid "Please find the corner with the perfect degree of extrusion"
 msgstr "請找到最完美的列印角度"
 
 msgid "Input Value"
@@ -18952,7 +18954,8 @@ msgstr "建立"
 msgid "Vendor is not selected, please reselect vendor."
 msgstr "廠牌尚未選擇，請重新選擇廠牌。"
 
-msgid "Custom vendor is not input, please input custom vendor."
+#, fuzzy
+msgid "Custom vendor is missing, please input custom vendor."
 msgstr "自訂廠牌尚未輸入，請輸入自訂廠牌。"
 
 msgid ""
@@ -18983,8 +18986,8 @@ msgstr "尚未選擇列印設備或預設，請至少選擇一個。"
 #, c-format, boost-format
 msgid ""
 "The Filament name %s you created already exists.\n"
-"If you continue creating, the preset created will be displayed with its full "
-"name. Do you want to continue?"
+"If you continue, the preset created will be displayed with its full name. "
+"Do you want to continue?"
 msgstr ""
 "所建立的線材名稱 %s 已經存在。\n"
 "如果繼續建立，預設將顯示完整的名稱。是否要繼續？"
@@ -20798,7 +20801,7 @@ msgstr ""
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
 "Flush into support/objects/infill\n"
-"Did you know that you can save wasted filament by flushing it into support/"
+"Did you know that you can reduce wasted filament by flushing it into support/"
 "objects/infill during filament change?"
 msgstr ""
 "廢料運用到支撐/物件/填充中\n"
diff --git a/resources/data/hints.ini b/resources/data/hints.ini
index ff3c8e158a..7839e5fd45 100644
--- a/resources/data/hints.ini
+++ b/resources/data/hints.ini
@@ -140,7 +140,7 @@ text = STEP\nDid you know that you can improve your print quality by slicing a S
 text = Z seam location\nDid you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!
 
 [hint:Fine-tuning for flow rate]
-text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning. 
+text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning.
 
 [hint:Split your prints into plates]
 text = Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts.
@@ -149,7 +149,7 @@ text = Split your prints into plates\nDid you know that you can split a model th
 text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
 
 [hint:Support painting]
-text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it. 
+text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it.
 
 [hint:Different types of supports]
 text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
@@ -167,7 +167,7 @@ text = Set parameters for multiple objects\nDid you know that you can set slicin
 text = Stack objects\nDid you know that you can stack objects as a whole one?
 
 [hint:Flush into support/objects/infill]
-text = Flush into support/objects/infill\nDid you know that you can save wasted filament by flushing it into support/objects/infill during filament change? 
+text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?
 
 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
diff --git a/src/slic3r/GUI/CalibrationWizardSavePage.cpp b/src/slic3r/GUI/CalibrationWizardSavePage.cpp
index 3ce5d7e602..f14238d990 100644
--- a/src/slic3r/GUI/CalibrationWizardSavePage.cpp
+++ b/src/slic3r/GUI/CalibrationWizardSavePage.cpp
@@ -876,7 +876,7 @@ void CaliPASaveManualPanel::set_pa_cali_method(ManualPaCaliMethod method)
         m_complete_text->SetLabel(_L("Please find the best line on your plate"));
         set_save_img();
     } else if (method == ManualPaCaliMethod::PA_PATTERN) {
-        m_complete_text->SetLabel(_L("Please find the corner with perfect degree of extrusion"));
+        m_complete_text->SetLabel(_L("Please find the corner with the perfect degree of extrusion"));
         if (wxGetApp().app_config->get_language_code() == "zh-cn") {
             m_picture_panel->set_bmp(ScalableBitmap(this, "fd_pattern_manual_result_CN", 350));
         } else {
@@ -1065,7 +1065,7 @@ void CaliPASaveP1PPanel::set_pa_cali_method(ManualPaCaliMethod method)
         set_save_img();
     }
     else if (method == ManualPaCaliMethod::PA_PATTERN) {
-        m_complete_text->SetLabel(_L("Please find the corner with perfect degree of extrusion"));
+        m_complete_text->SetLabel(_L("Please find the corner with the perfect degree of extrusion"));
         if (wxGetApp().app_config->get_language_code() == "zh-cn") {
             m_picture_panel->set_bmp(ScalableBitmap(this, "fd_pattern_manual_result_CN", 350));
         } else {
diff --git a/src/slic3r/GUI/CreatePresetsDialog.cpp b/src/slic3r/GUI/CreatePresetsDialog.cpp
index a85618145d..eb73cc33e8 100644
--- a/src/slic3r/GUI/CreatePresetsDialog.cpp
+++ b/src/slic3r/GUI/CreatePresetsDialog.cpp
@@ -1058,7 +1058,7 @@ wxWindow *CreateFilamentPresetDialog::create_dialog_buttons()
             }
         } else {
             if (m_filament_custom_vendor_input->GetTextCtrl()->GetValue().empty()) {
-                MessageDialog dlg(this, _L("Custom vendor is not input, please input custom vendor."), wxString(SLIC3R_APP_FULL_NAME) + " - " + _L("Info"),
+                MessageDialog dlg(this, _L("Custom vendor is missing, please input custom vendor."), wxString(SLIC3R_APP_FULL_NAME) + " - " + _L("Info"),
                                   wxYES | wxYES_DEFAULT | wxCENTRE);
                 dlg.ShowModal();
                 return;
@@ -1130,7 +1130,7 @@ wxWindow *CreateFilamentPresetDialog::create_dialog_buttons()
         if (preset_bundle->filaments.is_alias_exist(filament_preset_name)) {
             MessageDialog dlg(this,
                               wxString::Format(_L("The Filament name %s you created already exists.\n"
-                                                  "If you continue creating, the preset created will be displayed with its full name. Do you want to continue?"),
+                                                  "If you continue, the preset created will be displayed with its full name. Do you want to continue?"),
                                                from_u8(filament_preset_name)),
                               wxString(SLIC3R_APP_FULL_NAME) + " - " + _L("Info"), wxYES_NO | wxYES_DEFAULT | wxCENTRE);
             if (wxID_YES != dlg.ShowModal()) { return; }
diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index 0b539e2cd3..b8b36861a8 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -2843,7 +2843,7 @@ bool GUI_App::on_init_inner()
                 wxString tips = wxString::Format(_L("Click to download new version in default browser: %s"), version_str);
                 DownloadDialog dialog(this->mainframe,
                     tips,
-                    _L("The Orca Slicer needs an upgrade"),
+                    _L("OrcaSlicer needs an update"),
                     false,
                     wxCENTER | wxICON_INFORMATION);
                 dialog.SetExtendedMessage(description_text);
diff --git a/src/slic3r/GUI/GUI_Factories.cpp b/src/slic3r/GUI/GUI_Factories.cpp
index 0ee4a76c62..8aa227ebdc 100644
--- a/src/slic3r/GUI/GUI_Factories.cpp
+++ b/src/slic3r/GUI/GUI_Factories.cpp
@@ -1233,7 +1233,7 @@ void MenuFactory::append_menu_items_convert_unit(wxMenu* menu)
 
 void MenuFactory::append_menu_item_merge_to_multipart_object(wxMenu* menu)
 {
-    append_menu_item(menu, wxID_ANY, _L("Assemble"), _L("Assemble the selected objects to an object with multiple parts"),
+    append_menu_item(menu, wxID_ANY, _L("Assemble"), _L("Assemble the selected objects into an object with multiple parts"),
         [](wxCommandEvent&) { obj_list()->merge(true); }, "", menu,
         []() { return obj_list()->can_merge_to_multipart_object(); }, m_parent);
 }
@@ -1241,7 +1241,7 @@ void MenuFactory::append_menu_item_merge_to_multipart_object(wxMenu* menu)
 void MenuFactory::append_menu_item_merge_to_single_object(wxMenu* menu)
 {
     menu->AppendSeparator();
-    append_menu_item(menu, wxID_ANY, _L("Assemble"), _L("Assemble the selected objects to an object with single part"),
+    append_menu_item(menu, wxID_ANY, _L("Assemble"), _L("Assemble the selected objects into an object with single part"),
         [](wxCommandEvent&) { obj_list()->merge(false); }, "", menu,
         []() { return obj_list()->can_merge_to_single_object(); }, m_parent);
 }
diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp
index a343899ec3..7f598c3c62 100644
--- a/src/slic3r/GUI/MainFrame.cpp
+++ b/src/slic3r/GUI/MainFrame.cpp
@@ -2539,7 +2539,7 @@ static wxMenu* generate_help_menu()
     wxMenu* helpMenu = new wxMenu();
 
     // shortcut key
-    append_menu_item(helpMenu, wxID_ANY, _L("Keyboard Shortcuts") + sep + "&?", _L("Show the list of the keyboard shortcuts"),
+    append_menu_item(helpMenu, wxID_ANY, _L("Keyboard Shortcuts") + sep + "&?", _L("Show the list of keyboard shortcuts"),
         [](wxCommandEvent&) { wxGetApp().keyboard_shortcuts(); });
     // Show Beginner's Tutorial
     append_menu_item(helpMenu, wxID_ANY, _L("Setup Wizard"), _L("Setup Wizard"), [](wxCommandEvent &) {wxGetApp().ShowUserGuide();});
diff --git a/src/slic3r/GUI/Preferences.cpp b/src/slic3r/GUI/Preferences.cpp
index ccb85ec813..0578fd7e51 100644
--- a/src/slic3r/GUI/Preferences.cpp
+++ b/src/slic3r/GUI/Preferences.cpp
@@ -1784,7 +1784,7 @@ void PreferencesDialog::create_items()
     //// DEVELOPER > Settings
     g_sizer->Add(create_item_title(_L("Settings")), 1, wxEXPAND);
 
-    auto item_develop_mode     = create_item_checkbox(_L("Develop mode"), "", "developer_mode");
+    auto item_develop_mode     = create_item_checkbox(_L("Developer mode"), "", "developer_mode");
     g_sizer->Add(item_develop_mode);
 
     auto item_ams_blacklist    = create_item_checkbox(_L("Skip AMS blacklist check"), "", "skip_ams_blacklist_check");