mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-14 11:21:18 +00:00
Add orca-translations Claude skill and PO tool (#16436)
* Add orca-translations Claude skill and PO tool
Add a .claude skill that guides translation passes over the localization/i18n gettext catalogs. It covers the workflow: run gettext, settle new glossary terms, translate in batches, verify, and report.
Includes translation-rules.md, which condenses the placeholder, line-break and glossary rules plus the guidance on review notes.
Also adds scripts/po_tool.py (standard library only). It lists pending entries with glossary hints, validates and applies translations, adding '# AI Translated' and '# Needs human review' comments, and rewrites only the entries it changes. It can also check catalogs, look up existing translations, suggest glossary candidates and update the wiki glossary TSV.
* Let po_tool apply translations by entry id
pending now gives each entry a short id, so a translation file can name
entries by id instead of repeating the English msgid. apply accepts either.
A "review": "" item clears an earlier review note when overwriting an
entry, and check gives each msgfmt run its own temporary output file so
parallel checks do not collide.
* Fill all empty translations
Regenerate the template with run_gettext --full and translate every empty
entry in the 22 catalogs (7,089 entries) with the orca-translations skill,
following the localization glossary, including the new belt printer,
IDEX/IQEX and plugin terms. Every new entry is marked "# AI Translated";
122 also carry "# Needs human review" with what to check.
* Show entry ids in po_tool lookup and search translations
lookup now prints each entry's id, so an entry found there can be
rewritten with apply --overwrite without repeating the English, and
--msgstr searches the translations instead of the msgids, which finds
every entry that still uses a term being changed.
SKILL.md describes how to change an established term: check the
catalog's usage first, update the glossary cell, then rewrite only the
entries where the term has that meaning.
* Fix mistranslated terms and align catalogs with the glossary
Correct labels that the glossary had copied, and the entries that used
them:
- ca: Raft was rendered as the Brim term; it is now "Rai". Exhaust fan,
Monotonic line, Unretract, Slice, Lateral Honeycomb and PA Tower
labels fixed.
- cs: Lightning infill is "Blesk", not "Osvětlení" (illumination).
- sv: Retraction is "Retraktion", not "Reduktion"; Unretract,
Lagerhöjd, Delkylningsfläkt, Utsugsfläkt, Aligned Rectilinear and the
Preset label fixed.
- de: Brim is "Rand" and Skirt is "Umrandung", as most entries already
had them.
- lt: brim entries used the Skirt word "apvadas"; they now use "kraštas".
- es: Sparse infill is "relleno de baja densidad", the catalog majority.
- eu: nozzle wipe is "garbiketa", not purge.
- th: the project plate is "เพลต", distinct from the bed.
- uk: Quarter Cubic, Latin "PA" in PA Tower, and Belt purge tower.
- pl: Cross Hatch, Tri-hexagon, Volumetric speed and Raft labels.
- zh_TW: Brim stays "Brim", as the existing labels have it.
- tr: "Prime Tower" read "Prime Minister Tower".
- ko: the plugin "Capabilities" label read "performance".
- Build Volume labels fixed in tr, de, cs and eu.
All 242 rewritten entries are marked "# AI Translated".
* Make more UI text translatable and fix pluralization and context
Audit the sources for text that translators could not translate
correctly and fix it.
Mark text that reached users in English only: IDEX/IQEX role names,
plugin permission prompts and errors, 3MF/preset loading errors, G-code
placeholder parser errors, calibration and device messages, notification
texts, file dialog filters, and the config validation messages.
Replace sentences built from translated fragments, such as the prime
tower warnings, "left"/"right" nozzle names, and "Filament " + number,
with single msgids that have placeholders, so translators can reorder
and inflect them.
Use plural forms for texts with a count ("%1% mixed filaments",
"%d objects", "%1% triangles") instead of "(s)" and mismatched verbs.
Fix the swapped singular/plural pair in "The following presets inherit
this preset".
Add translation contexts where one English word has several meanings
(Subscribed/Local, Standard, Pause, View, Step, Model, Camera, Flow,
Filter, Others, Prepare, the Design tools). Show "Size" instead of
"Build Volume" in the Cut tool, which displays the object size.
Fix code that compared translated text with English (the Edit G-code
dialog group, the plugin registration failure check), and add the
bundled web pages' missing string-table entries. Use the single
character for degrees Celsius, say "G-code", and describe the head
filament map without internal jargon.
Install the libslic3r translate callback before the presets load, so
their load errors are translated, and list the 28 source files that had
marked strings but were never extracted into localization/i18n/list.txt.
* Suggest earlier translations and list fuzzy entries in po_tool pending
pending now attaches the closest earlier translation of a similar
English text (from obsolete or translated entries), so a reworded or
split string keeps its wording, and it lists fuzzy entries by default,
since users never see them. A fuzzy entry also carries its stale
translation as previous_translation.
* Fix wording of the non-boolean operands error
The logical operation error said "operators" where it means the
operands the operation was applied to.
* Translate the newly translatable strings in all languages
Regenerate the template after the translatability changes and fill every
new or changed entry in the 22 catalogs (about 12,800 entries): the
strings that became translatable, the plural forms, the entries split by
context, and the previously fuzzy singular entries that became plurals.
Every new entry is marked "# AI Translated", and about 360 also carry a
"# Needs human review" note saying what to check. Terms follow the
localization glossary. Earlier translations of reworded strings were
reused where the meaning was unchanged. Existing entries were not
changed, and obsolete entries are kept.
* Document the source translatability audit in the orca-translations skill
Add a reference describing how strings reach translators, what to look
for (untranslated text, spliced sentences, missing plurals, ambiguous
words), what not to translate, where a context cannot be carried, and
what to do after the edits, plus a scanner that lists untranslated
user-facing string literals.
* Document how to write translatable strings in AGENTS.md
Tell developers to keep each message complete in one msgid: use
placeholders instead of concatenating translated fragments, plural forms
for counts, and contexts for ambiguous words, and to list new source
files in localization/i18n/list.txt. Add a matching code review item.
* Translate the strings added since the rebase
Regenerate the template against the current main and translate the 26
new entries per language: the Fix Model commands and messages, and the
texture displacement image adjustment panel. Each new entry is marked
"# AI Translated"; existing entries are unchanged.
* tidy
This commit is contained in:
Ian Bassi
+107
-96
@@ -2438,7 +2438,7 @@ void PrintConfigDef::init_fff_params()
|
||||
|
||||
def = this->add("machine_end_gcode", coString);
|
||||
def->label = L("End G-code");
|
||||
def->tooltip = L("Add end G-Code when finishing the entire print.");
|
||||
def->tooltip = L("Add end G-code when finishing the entire print.");
|
||||
def->multiline = true;
|
||||
def->full_width = true;
|
||||
def->height = 12;
|
||||
@@ -4578,7 +4578,7 @@ void PrintConfigDef::init_fff_params()
|
||||
//def->enum_values.push_back("machinekit");
|
||||
//def->enum_values.push_back("smoothie");
|
||||
//def->enum_values.push_back("no-extrusion");
|
||||
def->enum_labels.push_back("Marlin(legacy)");
|
||||
def->enum_labels.push_back(L("Marlin (legacy)"));
|
||||
def->enum_labels.push_back(L("Klipper"));
|
||||
def->enum_labels.push_back("RepRapFirmware");
|
||||
def->enum_labels.push_back("Repetier");
|
||||
@@ -5301,11 +5301,11 @@ void PrintConfigDef::init_fff_params()
|
||||
(void)L("Maximum speed E");
|
||||
def->category = L("Machine limits");
|
||||
def->readonly = false;
|
||||
def->tooltip = (boost::format("Maximum speed of %1% axis") % axis_upper).str();
|
||||
(void)L("Maximum X speed");
|
||||
(void)L("Maximum Y speed");
|
||||
(void)L("Maximum Z speed");
|
||||
(void)L("Maximum E speed");
|
||||
def->tooltip = (boost::format("Maximum speed of the %1% axis") % axis_upper).str();
|
||||
(void)L("Maximum speed of the X axis");
|
||||
(void)L("Maximum speed of the Y axis");
|
||||
(void)L("Maximum speed of the Z axis");
|
||||
(void)L("Maximum speed of the E axis");
|
||||
def->sidetext = L("mm/s"); // millimeters per second, CIS languages need translation
|
||||
def->min = 0;
|
||||
def->mode = comSimple;
|
||||
@@ -5919,7 +5919,7 @@ void PrintConfigDef::init_fff_params()
|
||||
|
||||
def = this->add("slicing_pipeline_plugin", coStrings);
|
||||
def->label = L("Slicing Pipeline Plugin");
|
||||
def->tooltip = L("Python plugin(s) invoked at each slicing pipeline step to read and modify intermediate slicing data, "
|
||||
def->tooltip = L("Python plugins invoked at each slicing pipeline step to read and modify intermediate slicing data, "
|
||||
"including a final G-code post-processing step. Research/experimental.");
|
||||
def->gui_type = ConfigOptionDef::GUIType::plugin_picker;
|
||||
def->plugin_type = "slicing-pipeline";
|
||||
@@ -6943,7 +6943,7 @@ void PrintConfigDef::init_fff_params()
|
||||
// are unchanged; only the gcode emission frame shifts.
|
||||
def = this->add("imex_firmware_managed_zones", coBool);
|
||||
def->label = L("Firmware-managed zones");
|
||||
def->tooltip = L("When enabled, the slicer emits g-code with the primary zone's "
|
||||
def->tooltip = L("When enabled, the slicer emits G-code with the primary zone's "
|
||||
"contents centered on bed origin (0,0). The printer firmware is "
|
||||
"responsible for placing copies/mirrors at each physical zone "
|
||||
"position. Enable only on printers whose firmware applies its own "
|
||||
@@ -7036,7 +7036,8 @@ void PrintConfigDef::init_fff_params()
|
||||
def = this->add("imex_head_filament_map", coString);
|
||||
def->label = L("IDEX/IQEX head filament map");
|
||||
def->tooltip = L("Per-plate override mapping physical heads to filament slots "
|
||||
"(1-based). Empty means use pem-inversion defaults.");
|
||||
"(1-based). Empty means each head uses the first filament that the "
|
||||
"printer's physical extruder map routes to it.");
|
||||
def->mode = comDevelop;
|
||||
def->set_default_value(new ConfigOptionString(""));
|
||||
|
||||
@@ -7628,7 +7629,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->category = L("Printable space");
|
||||
def->tooltip = L("Axis the mesh is rotated about before slicing. This is the belt "
|
||||
"printer's tilt: an isometric (no distortion) rotation that also "
|
||||
"drives bed rendering and support gravity tilt, and that the g-code "
|
||||
"drives bed rendering and support gravity tilt, and that the G-code "
|
||||
"back-transform inverts before the machine-frame shear/scale and remap. "
|
||||
"X is the typical gantry tilt (belt travels along Y).");
|
||||
def->enum_keys_map = &ConfigOptionEnum<BeltRotationAxis>::get_enum_values();
|
||||
@@ -7653,7 +7654,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def = this->add("belt_frame_tilt_decouple", coBool);
|
||||
def->label = L("Decouple machine-frame tilt");
|
||||
def->category = L("Printable space");
|
||||
def->tooltip = L("Expert override: set the machine-frame (g-code shear/scale) tilt angle "
|
||||
def->tooltip = L("Expert override: set the machine-frame (G-code shear/scale) tilt angle "
|
||||
"independently of the pre-slice rotation angle. When disabled, the "
|
||||
"machine-frame transform is derived from the belt tilt angle, so a single "
|
||||
"angle drives both stages. Enable only to compensate for a machine whose "
|
||||
@@ -8620,7 +8621,7 @@ void PrintConfigDef::init_fff_params()
|
||||
def->label = L("Maximum wall deviation");
|
||||
def->category = L("Quality");
|
||||
def->tooltip = L("The maximum deviation allowed when reducing the resolution for the 'Maximum wall resolution' setting. If you increase this, "
|
||||
"the print will be less accurate, but the G-Code will be smaller. 'Maximum wall deviation' limits 'Maximum wall resolution', "
|
||||
"the print will be less accurate, but the G-code will be smaller. 'Maximum wall deviation' limits 'Maximum wall resolution', "
|
||||
"so if the two conflict, 'Maximum wall deviation' takes precedence.");
|
||||
def->sidetext = L("mm"); // millimeters, CIS languages need translation
|
||||
def->mode = comExpert;
|
||||
@@ -9939,7 +9940,8 @@ void PrintConfigDef::handle_legacy_composite(DynamicPrintConfig &config)
|
||||
auto [thumbnails_list, errors] = GCodeThumbnails::make_and_check_thumbnail_list(thumbnails_str, extention);
|
||||
|
||||
if (errors != enum_bitmask<ThumbnailError>()) {
|
||||
std::string error_str = "\n" + Slic3r::format("Invalid value provided for parameter %1%: %2%", "thumbnails", thumbnails_str);
|
||||
// TRN %1% is a parameter name, %2% its value.
|
||||
std::string error_str = "\n" + Slic3r::format(_u8L("Invalid value provided for parameter %1%: %2%"), "thumbnails", thumbnails_str);
|
||||
error_str += GCodeThumbnails::get_error_string(errors);
|
||||
throw BadOptionValueException(error_str);
|
||||
}
|
||||
@@ -12328,42 +12330,42 @@ std::map<std::string, std::string> validate(const FullPrintConfig &cfg, bool und
|
||||
std::map<std::string, std::string> error_message;
|
||||
// --layer-height
|
||||
if (cfg.get_abs_value("layer_height") <= 0) {
|
||||
error_message.emplace("layer_height", L("invalid value ") + std::to_string(cfg.get_abs_value("layer_height")));
|
||||
error_message.emplace("layer_height", _u8L("invalid value ") + std::to_string(cfg.get_abs_value("layer_height")));
|
||||
}
|
||||
else if (fabs(fmod(cfg.get_abs_value("layer_height"), SCALING_FACTOR)) > 1e-4) {
|
||||
error_message.emplace("layer_height", L("invalid value ") + std::to_string(cfg.get_abs_value("layer_height")));
|
||||
error_message.emplace("layer_height", _u8L("invalid value ") + std::to_string(cfg.get_abs_value("layer_height")));
|
||||
}
|
||||
|
||||
// --first-layer-height
|
||||
if (cfg.initial_layer_print_height.value <= 0) {
|
||||
error_message.emplace("initial_layer_print_height", L("invalid value ") + std::to_string(cfg.initial_layer_print_height.value));
|
||||
error_message.emplace("initial_layer_print_height", _u8L("invalid value ") + std::to_string(cfg.initial_layer_print_height.value));
|
||||
}
|
||||
|
||||
// --filament-diameter
|
||||
for (double fd : cfg.filament_diameter.values)
|
||||
if (fd < 1) {
|
||||
error_message.emplace("filament_diameter", L("invalid value ") + cfg.filament_diameter.serialize());
|
||||
error_message.emplace("filament_diameter", _u8L("invalid value ") + cfg.filament_diameter.serialize());
|
||||
break;
|
||||
}
|
||||
|
||||
// --nozzle-diameter
|
||||
for (double nd : cfg.nozzle_diameter.values)
|
||||
if (nd < 0.005) {
|
||||
error_message.emplace("nozzle_diameter", L("invalid value ") + cfg.nozzle_diameter.serialize());
|
||||
error_message.emplace("nozzle_diameter", _u8L("invalid value ") + cfg.nozzle_diameter.serialize());
|
||||
break;
|
||||
}
|
||||
|
||||
// --perimeters
|
||||
if (cfg.wall_loops.value < 0) {
|
||||
error_message.emplace("wall_loops", L("invalid value ") + std::to_string(cfg.wall_loops.value));
|
||||
error_message.emplace("wall_loops", _u8L("invalid value ") + std::to_string(cfg.wall_loops.value));
|
||||
}
|
||||
|
||||
// --solid-layers
|
||||
if (cfg.top_shell_layers < 0) {
|
||||
error_message.emplace("top_shell_layers", L("invalid value ") + std::to_string(cfg.top_shell_layers));
|
||||
error_message.emplace("top_shell_layers", _u8L("invalid value ") + std::to_string(cfg.top_shell_layers));
|
||||
}
|
||||
if (cfg.bottom_shell_layers < 0) {
|
||||
error_message.emplace("bottom_shell_layers", L("invalid value ") + std::to_string(cfg.bottom_shell_layers));
|
||||
error_message.emplace("bottom_shell_layers", _u8L("invalid value ") + std::to_string(cfg.bottom_shell_layers));
|
||||
}
|
||||
|
||||
if (cfg.use_firmware_retraction.value &&
|
||||
@@ -12384,61 +12386,61 @@ std::map<std::string, std::string> validate(const FullPrintConfig &cfg, bool und
|
||||
|
||||
// --gcode-flavor
|
||||
if (! print_config_def.get("gcode_flavor")->has_enum_value(cfg.gcode_flavor.serialize())) {
|
||||
error_message.emplace("gcode_flavor", L("invalid value ") + cfg.gcode_flavor.serialize());
|
||||
error_message.emplace("gcode_flavor", _u8L("invalid value ") + cfg.gcode_flavor.serialize());
|
||||
}
|
||||
|
||||
// --fill-pattern
|
||||
if (! print_config_def.get("sparse_infill_pattern")->has_enum_value(cfg.sparse_infill_pattern.serialize())) {
|
||||
error_message.emplace("sparse_infill_pattern", L("invalid value ") + cfg.sparse_infill_pattern.serialize());
|
||||
error_message.emplace("sparse_infill_pattern", _u8L("invalid value ") + cfg.sparse_infill_pattern.serialize());
|
||||
}
|
||||
|
||||
// --top-fill-pattern
|
||||
if (! print_config_def.get("top_surface_pattern")->has_enum_value(cfg.top_surface_pattern.serialize())) {
|
||||
error_message.emplace("top_surface_pattern", L("invalid value ") + cfg.top_surface_pattern.serialize());
|
||||
error_message.emplace("top_surface_pattern", _u8L("invalid value ") + cfg.top_surface_pattern.serialize());
|
||||
}
|
||||
|
||||
// --bottom-fill-pattern
|
||||
if (! print_config_def.get("bottom_surface_pattern")->has_enum_value(cfg.bottom_surface_pattern.serialize())) {
|
||||
error_message.emplace("bottom_surface_pattern", L("invalid value ") + cfg.bottom_surface_pattern.serialize());
|
||||
error_message.emplace("bottom_surface_pattern", _u8L("invalid value ") + cfg.bottom_surface_pattern.serialize());
|
||||
}
|
||||
|
||||
// --soild-fill-pattern
|
||||
if (!print_config_def.get("internal_solid_infill_pattern")->has_enum_value(cfg.internal_solid_infill_pattern.serialize())) {
|
||||
error_message.emplace("internal_solid_infill_pattern", L("invalid value ") + cfg.internal_solid_infill_pattern.serialize());
|
||||
error_message.emplace("internal_solid_infill_pattern", _u8L("invalid value ") + cfg.internal_solid_infill_pattern.serialize());
|
||||
}
|
||||
|
||||
// --skirt-height
|
||||
if (cfg.skirt_height < 0) {
|
||||
error_message.emplace("skirt_height", L("invalid value ") + std::to_string(cfg.skirt_height));
|
||||
error_message.emplace("skirt_height", _u8L("invalid value ") + std::to_string(cfg.skirt_height));
|
||||
}
|
||||
|
||||
// --bridge-flow-ratio
|
||||
if (cfg.bridge_flow <= 0) {
|
||||
error_message.emplace("bridge_flow", L("invalid value ") + std::to_string(cfg.bridge_flow));
|
||||
error_message.emplace("bridge_flow", _u8L("invalid value ") + std::to_string(cfg.bridge_flow));
|
||||
}
|
||||
|
||||
// --internal-bridge-flow-ratio
|
||||
if (cfg.internal_bridge_flow <= 0) {
|
||||
error_message.emplace("internal_bridge_flow", L("invalid value ") + std::to_string(cfg.internal_bridge_flow));
|
||||
error_message.emplace("internal_bridge_flow", _u8L("invalid value ") + std::to_string(cfg.internal_bridge_flow));
|
||||
}
|
||||
|
||||
// extruder clearance
|
||||
if (cfg.extruder_clearance_radius <= 0) {
|
||||
error_message.emplace("extruder_clearance_radius", L("invalid value ") + std::to_string(cfg.extruder_clearance_radius));
|
||||
error_message.emplace("extruder_clearance_radius", _u8L("invalid value ") + std::to_string(cfg.extruder_clearance_radius));
|
||||
}
|
||||
if (cfg.extruder_clearance_height_to_rod <= 0) {
|
||||
error_message.emplace("extruder_clearance_height_to_rod", L("invalid value ") + std::to_string(cfg.extruder_clearance_height_to_rod));
|
||||
error_message.emplace("extruder_clearance_height_to_rod", _u8L("invalid value ") + std::to_string(cfg.extruder_clearance_height_to_rod));
|
||||
}
|
||||
if (cfg.extruder_clearance_height_to_lid <= 0) {
|
||||
error_message.emplace("extruder_clearance_height_to_lid", L("invalid value ") + std::to_string(cfg.extruder_clearance_height_to_lid));
|
||||
error_message.emplace("extruder_clearance_height_to_lid", _u8L("invalid value ") + std::to_string(cfg.extruder_clearance_height_to_lid));
|
||||
}
|
||||
if (cfg.nozzle_height <= 0)
|
||||
error_message.emplace("nozzle_height", L("invalid value ") + std::to_string(cfg.nozzle_height));
|
||||
error_message.emplace("nozzle_height", _u8L("invalid value ") + std::to_string(cfg.nozzle_height));
|
||||
|
||||
// --extrusion-multiplier
|
||||
for (double em : cfg.filament_flow_ratio.values)
|
||||
if (em <= 0) {
|
||||
error_message.emplace("filament_flow_ratio", L("invalid value ") + cfg.filament_flow_ratio.serialize());
|
||||
error_message.emplace("filament_flow_ratio", _u8L("invalid value ") + cfg.filament_flow_ratio.serialize());
|
||||
break;
|
||||
}
|
||||
|
||||
@@ -12448,27 +12450,27 @@ std::map<std::string, std::string> validate(const FullPrintConfig &cfg, bool und
|
||||
// Note that we might want to have more than one perimeter on the bottom
|
||||
// solid layers.
|
||||
if (cfg.wall_loops != 1) {
|
||||
error_message.emplace("wall_loops", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.wall_loops));
|
||||
error_message.emplace("wall_loops", _u8L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.wall_loops));
|
||||
//return "Can't make more than one perimeter when spiral vase mode is enabled";
|
||||
//return "Can't make less than one perimeter when spiral vase mode is enabled";
|
||||
}
|
||||
|
||||
if (cfg.sparse_infill_density > 0) {
|
||||
error_message.emplace("sparse_infill_density", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.sparse_infill_density));
|
||||
error_message.emplace("sparse_infill_density", _u8L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.sparse_infill_density));
|
||||
//return "Spiral vase mode can only print hollow objects, so you need to set Fill density to 0";
|
||||
}
|
||||
|
||||
if (cfg.top_shell_layers > 0) {
|
||||
error_message.emplace("top_shell_layers", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.top_shell_layers));
|
||||
error_message.emplace("top_shell_layers", _u8L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.top_shell_layers));
|
||||
//return "Spiral vase mode is not compatible with top solid layers";
|
||||
}
|
||||
|
||||
if (cfg.enable_support ) {
|
||||
error_message.emplace("enable_support", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.enable_support));
|
||||
error_message.emplace("enable_support", _u8L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.enable_support));
|
||||
//return "Spiral vase mode is not compatible with support";
|
||||
}
|
||||
if (cfg.enforce_support_layers > 0) {
|
||||
error_message.emplace("enforce_support_layers", L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.enforce_support_layers));
|
||||
error_message.emplace("enforce_support_layers", _u8L("Invalid value when spiral vase mode is enabled: ") + std::to_string(cfg.enforce_support_layers));
|
||||
//return "Spiral vase mode is not compatible with support";
|
||||
}
|
||||
}
|
||||
@@ -12499,9 +12501,9 @@ std::map<std::string, std::string> validate(const FullPrintConfig &cfg, bool und
|
||||
double allowed_max = (key == "bridge_line_width") ? min_nozzle_diameter : MAX_LINE_WIDTH_MULTIPLIER * max_nozzle_diameter;
|
||||
if (abs_width > allowed_max) {
|
||||
if (key == "bridge_line_width")
|
||||
error_message.emplace(key, L("Bridge line width must not exceed nozzle diameter: ") + std::to_string(abs_width));
|
||||
error_message.emplace(key, _u8L("Bridge line width must not exceed nozzle diameter: ") + std::to_string(abs_width));
|
||||
else
|
||||
error_message.emplace(key, L("too large line width ") + std::to_string(abs_width));
|
||||
error_message.emplace(key, _u8L("too large line width ") + std::to_string(abs_width));
|
||||
//return std::string("Too Large line width: ") + key;
|
||||
}
|
||||
}
|
||||
@@ -12548,7 +12550,8 @@ std::map<std::string, std::string> validate(const FullPrintConfig &cfg, bool und
|
||||
}
|
||||
if (out_of_range) {
|
||||
if (error_message.find(opt_key) == error_message.end())
|
||||
error_message.emplace(opt_key, opt->serialize() + L(" not in range ") +"[" + std::to_string(optdef->min) + "," + std::to_string(optdef->max) + "]");
|
||||
// TRN %1% is the current value, %2% and %3% the lowest and highest allowed values.
|
||||
error_message.emplace(opt_key, Slic3r::format(_u8L("%1% not in range [%2%, %3%]"), opt->serialize(), optdef->min, optdef->max));
|
||||
//return std::string("Value out of range: " + opt_key);
|
||||
}
|
||||
}
|
||||
@@ -12606,7 +12609,7 @@ CLIActionsConfigDef::CLIActionsConfigDef()
|
||||
// Actions:
|
||||
/*def = this->add("export_obj", coBool);
|
||||
def->label = L("Export OBJ");
|
||||
def->tooltip = L("Export the model(s) as OBJ.");
|
||||
def->tooltip = L("Export the models as OBJ.");
|
||||
def->set_default_value(new ConfigOptionBool(false));*/
|
||||
|
||||
/*
|
||||
@@ -12642,7 +12645,7 @@ CLIActionsConfigDef::CLIActionsConfigDef()
|
||||
|
||||
/*def = this->add("export_amf", coBool);
|
||||
def->label = L("Export AMF");
|
||||
def->tooltip = L("Export the model(s) as AMF.");
|
||||
def->tooltip = L("Export the models as AMF.");
|
||||
def->set_default_value(new ConfigOptionBool(false));*/
|
||||
|
||||
def = this->add("export_stl", coBool);
|
||||
@@ -12926,7 +12929,7 @@ CLITransformConfigDef::CLITransformConfigDef()
|
||||
|
||||
/*def = this->add("split", coBool);
|
||||
def->label = L("Split");
|
||||
def->tooltip = L("Detect unconnected parts in the given model(s) and split them into separate objects.");
|
||||
def->tooltip = L("Detect unconnected parts in the given models and split them into separate objects.");
|
||||
|
||||
def = this->add("scale_to_fit", coPoint3);
|
||||
def->label = L("Scale to Fit");
|
||||
@@ -13234,12 +13237,12 @@ OtherSlicingStatesConfigDef::OtherSlicingStatesConfigDef()
|
||||
def->label = L("Has single extruder MM priming");
|
||||
def->tooltip = L("Are the extra multi-material priming regions used in this print?");
|
||||
|
||||
new_def("initial_no_support_extruder", coInt, "Initial no support extruder", "Zero-based index of the first extruder used for printing without support. Same as initial_no_support_tool.");
|
||||
new_def("in_head_wrap_detect_zone", coBool, "In head wrap detect zone", "Indicates if the first layer overlaps with the head wrap zone.");
|
||||
new_def("curr_bed_type", coString, "Current bed type", "Name of the currently selected bed plate type (e.g. 'Textured PEI Plate', 'Smooth High Temp Plate').");
|
||||
new_def("imex_mode", coString, "IDEX/IQEX active mode", "Name of the active IDEX/IQEX parallel print mode for this plate (e.g. 'primary', 'mirror', 'copy'). Empty string if IDEX/IQEX is not enabled.");
|
||||
new_def("imex_mode_index", coInt, "IDEX/IQEX active mode index", "Zero-based index of the active IDEX/IQEX parallel print mode within imex_mode_names.");
|
||||
new_def("imex_mode_gcode", coString, "IDEX/IQEX active mode G-code", "The raw mode G-code template for the active IDEX/IQEX parallel print mode, after placeholder evaluation. Globals defined here flow into machine_start_gcode.");
|
||||
new_def("initial_no_support_extruder", coInt, L("Initial no support extruder"), L("Zero-based index of the first extruder used for printing without support. Same as initial_no_support_tool."));
|
||||
new_def("in_head_wrap_detect_zone", coBool, L("In head wrap detect zone"), L("Indicates if the first layer overlaps with the head wrap zone."));
|
||||
new_def("curr_bed_type", coString, L("Current bed type"), L("Name of the currently selected bed plate type (e.g. 'Textured PEI Plate', 'Smooth High Temp Plate')."));
|
||||
new_def("imex_mode", coString, L("IDEX/IQEX active mode"), L("Name of the active IDEX/IQEX parallel print mode for this plate (e.g. 'primary', 'mirror', 'copy'). Empty string if IDEX/IQEX is not enabled."));
|
||||
new_def("imex_mode_index", coInt, L("IDEX/IQEX active mode index"), L("Zero-based index of the active IDEX/IQEX parallel print mode within imex_mode_names."));
|
||||
new_def("imex_mode_gcode", coString, L("IDEX/IQEX active mode G-code"), L("The raw mode G-code template for the active IDEX/IQEX parallel print mode, after placeholder evaluation. Globals defined here flow into machine_start_gcode."));
|
||||
}
|
||||
|
||||
PrintStatisticsConfigDef::PrintStatisticsConfigDef()
|
||||
@@ -13357,8 +13360,8 @@ ObjectsInfoConfigDef::ObjectsInfoConfigDef()
|
||||
def->label = L("Input filename without extension");
|
||||
def->tooltip = L("Source filename of the first object, without extension.");
|
||||
|
||||
new_def("input_filename", coString, "Full input filename", "Source filename of the first object.");
|
||||
new_def("plate_name", coString, "Plate name", "Name of the plate sliced.");
|
||||
new_def("input_filename", coString, L("Full input filename"), L("Source filename of the first object."));
|
||||
new_def("plate_name", coString, L("Plate name"), L("Name of the plate sliced."));
|
||||
}
|
||||
|
||||
DimensionsConfigDef::DimensionsConfigDef()
|
||||
@@ -13397,22 +13400,22 @@ DimensionsConfigDef::DimensionsConfigDef()
|
||||
def->label = L("Size of the print bed bounding box");
|
||||
def->tooltip = bb_size_tooltip;
|
||||
|
||||
new_def("first_layer_center_no_wipe_tower", coFloats, "First layer center without wipe tower", point_tooltip);
|
||||
new_def("first_layer_height", coFloat, "First layer height", "Height of the first layer.");
|
||||
new_def("first_layer_center_no_wipe_tower", coFloats, L("First layer center without wipe tower"), point_tooltip);
|
||||
new_def("first_layer_height", coFloat, L("First layer height"), L("Height of the first layer."));
|
||||
}
|
||||
|
||||
TemperaturesConfigDef::TemperaturesConfigDef()
|
||||
{
|
||||
ConfigOptionDef* def;
|
||||
|
||||
new_def("bed_temperature", coInts, "Bed temperature", "Vector of bed temperatures for each extruder/filament.")
|
||||
new_def("bed_temperature_initial_layer", coInts, "First layer bed temperature", "Vector of first layer bed temperatures for each extruder/filament. Provides the same value as first_layer_bed_temperature.")
|
||||
new_def("bed_temperature_initial_layer_single", coInt, "First layer bed temperature (initial extruder)", "First layer bed temperature for the initial extruder. Same as bed_temperature_initial_layer[initial_extruder]")
|
||||
new_def("chamber_temperature", coInts, "Chamber temperature", "Vector of chamber temperatures for each extruder/filament.")
|
||||
new_def("chamber_minimal_temperature", coInts, "Chamber minimal temperature", "Vector of minimal chamber temperatures for each extruder/filament.")
|
||||
new_def("overall_chamber_temperature", coInt, "Overall chamber temperature", "Overall chamber temperature. This value is the maximum chamber temperature of any extruder/filament used.")
|
||||
new_def("first_layer_bed_temperature", coInts, "First layer bed temperature", "Vector of first layer bed temperatures for each extruder/filament. Provides the same value as bed_temperature_initial_layer.")
|
||||
new_def("first_layer_temperature", coInts, "First layer temperature", "Vector of first layer temperatures for each extruder/filament.")
|
||||
new_def("bed_temperature", coInts, L("Bed temperature"), L("Vector of bed temperatures for each extruder/filament."))
|
||||
new_def("bed_temperature_initial_layer", coInts, L("First layer bed temperature"), L("Vector of first layer bed temperatures for each extruder/filament. Provides the same value as first_layer_bed_temperature."))
|
||||
new_def("bed_temperature_initial_layer_single", coInt, L("First layer bed temperature (initial extruder)"), L("First layer bed temperature for the initial extruder. Same as bed_temperature_initial_layer[initial_extruder]"))
|
||||
new_def("chamber_temperature", coInts, L("Chamber temperature"), L("Vector of chamber temperatures for each extruder/filament."))
|
||||
new_def("chamber_minimal_temperature", coInts, L("Chamber minimal temperature"), L("Vector of minimal chamber temperatures for each extruder/filament."))
|
||||
new_def("overall_chamber_temperature", coInt, L("Overall chamber temperature"), L("Overall chamber temperature. This value is the maximum chamber temperature of any extruder/filament used."))
|
||||
new_def("first_layer_bed_temperature", coInts, L("First layer bed temperature"), L("Vector of first layer bed temperatures for each extruder/filament. Provides the same value as bed_temperature_initial_layer."))
|
||||
new_def("first_layer_temperature", coInts, L("First layer temperature"), L("Vector of first layer temperatures for each extruder/filament."))
|
||||
}
|
||||
|
||||
|
||||
@@ -13519,42 +13522,50 @@ CustomGcodeSpecificConfigDef::CustomGcodeSpecificConfigDef()
|
||||
def->tooltip = L("The current extruder ID. The same as current_extruder.");
|
||||
|
||||
// change_filament_gcode
|
||||
new_def("previous_extruder", coInt, "Previous extruder", "Index of the extruder that is being unloaded. The index is zero based (first extruder has index 0).");
|
||||
new_def("next_extruder", coInt, "Next extruder", "Index of the extruder that is being loaded. The index is zero based (first extruder has index 0).");
|
||||
new_def("relative_e_axis", coBool, "Relative e-axis", "Indicates if relative positioning is being used.");
|
||||
new_def("toolchange_count", coInt, "Toolchange count", "The number of toolchanges throught the print.");
|
||||
new_def("previous_extruder", coInt, L("Previous extruder"), L("Index of the extruder that is being unloaded. The index is zero based (first extruder has index 0)."));
|
||||
new_def("next_extruder", coInt, L("Next extruder"), L("Index of the extruder that is being loaded. The index is zero based (first extruder has index 0)."));
|
||||
new_def("relative_e_axis", coBool, L("Relative e-axis"), L("Indicates if relative positioning is being used."));
|
||||
new_def("toolchange_count", coInt, L("Toolchange count"), L("The number of toolchanges throughout the print."));
|
||||
new_def("fan_speed", coNone, "", ""); //Option is no longer used and is zeroed by placeholder parser for compatability
|
||||
new_def("old_retract_length", coFloat, "Old retract length", "The retraction length of the previous filament.");
|
||||
new_def("new_retract_length", coFloat, "New retract length", "The retraction lenght of the new filament.");
|
||||
new_def("old_retract_length_toolchange", coFloat, "Old retract length toolchange", "The toolchange retraction length of the previous filament.");
|
||||
new_def("new_retract_length_toolchange", coFloat, "New retract length toolchange", "The toolchange retraction length of the new filament.");
|
||||
new_def("old_filament_temp", coInt, "Old filament temp", "The old filament temp.");
|
||||
new_def("new_filament_temp", coInt, "New filament temp", "The new filament temp.");
|
||||
new_def("x_after_toolchange", coFloat, "X after toolchange", "The X pos after toolchange.");
|
||||
new_def("y_after_toolchange", coFloat, "Y after toolchange", "The Y pos after toolchange.");
|
||||
new_def("z_after_toolchange", coFloat, "Z after toolchange", "The Z pos after toolchange.");
|
||||
new_def("first_flush_volume", coFloat, "First flush volume", "The first flush volume.");
|
||||
new_def("second_flush_volume", coFloat, "Second flush volume", "The second flush volume.");
|
||||
new_def("old_filament_e_feedrate", coInt, "Old filament e feedrate", "The old filament extruder feedrate.");
|
||||
new_def("new_filament_e_feedrate", coInt, "New filament e feedrate", "The new filament extruder feedrate.");
|
||||
new_def("travel_point_1_x", coFloat, "Travel point 1 X", "The travel point 1 X.");
|
||||
new_def("travel_point_1_y", coFloat, "Travel point 1 Y", "The travel point 1 Y.");
|
||||
new_def("travel_point_2_x", coFloat, "Travel point 2 X", "The travel point 2 X.");
|
||||
new_def("travel_point_2_y", coFloat, "Travel point 2 Y", "The travel point 2 Y.");
|
||||
new_def("travel_point_3_x", coFloat, "Travel point 3 X", "The travel point 3 X.");
|
||||
new_def("travel_point_3_y", coFloat, "Travel point 3 Y", "The travel point 3 Y.");
|
||||
new_def("flush_length_1", coFloat, "Flush Length 1", "The first flush length.");
|
||||
new_def("flush_length_2", coFloat, "Flush Length 2", "The second flush length.");
|
||||
new_def("flush_length_3", coFloat, "Flush Length 3", "The third flush length.");
|
||||
new_def("flush_length_4", coFloat, "Flush Length 4", "The fourth flush length.");
|
||||
new_def("old_retract_length", coFloat, L("Old retract length"), L("The retraction length of the previous filament."));
|
||||
new_def("new_retract_length", coFloat, L("New retract length"), L("The retraction length of the new filament."));
|
||||
new_def("old_retract_length_toolchange", coFloat, L("Old retract length toolchange"), L("The toolchange retraction length of the previous filament."));
|
||||
new_def("new_retract_length_toolchange", coFloat, L("New retract length toolchange"), L("The toolchange retraction length of the new filament."));
|
||||
new_def("old_filament_temp", coInt, L("Old filament temp"), L("The old filament temp."));
|
||||
new_def("new_filament_temp", coInt, L("New filament temp"), L("The new filament temp."));
|
||||
new_def("x_after_toolchange", coFloat, L("X after toolchange"), L("The X pos after toolchange."));
|
||||
new_def("y_after_toolchange", coFloat, L("Y after toolchange"), L("The Y pos after toolchange."));
|
||||
new_def("z_after_toolchange", coFloat, L("Z after toolchange"), L("The Z pos after toolchange."));
|
||||
new_def("first_flush_volume", coFloat, L("First flush volume"), L("The first flush volume."));
|
||||
new_def("second_flush_volume", coFloat, L("Second flush volume"), L("The second flush volume."));
|
||||
new_def("old_filament_e_feedrate", coInt, L("Old filament e feedrate"), L("The old filament extruder feedrate."));
|
||||
new_def("new_filament_e_feedrate", coInt, L("New filament e feedrate"), L("The new filament extruder feedrate."));
|
||||
new_def("travel_point_1_x", coFloat, L("Travel point 1 X"), L("The travel point 1 X."));
|
||||
new_def("travel_point_1_y", coFloat, L("Travel point 1 Y"), L("The travel point 1 Y."));
|
||||
new_def("travel_point_2_x", coFloat, L("Travel point 2 X"), L("The travel point 2 X."));
|
||||
new_def("travel_point_2_y", coFloat, L("Travel point 2 Y"), L("The travel point 2 Y."));
|
||||
new_def("travel_point_3_x", coFloat, L("Travel point 3 X"), L("The travel point 3 X."));
|
||||
new_def("travel_point_3_y", coFloat, L("Travel point 3 Y"), L("The travel point 3 Y."));
|
||||
new_def("flush_length_1", coFloat, L("Flush Length 1"), L("The first flush length."));
|
||||
new_def("flush_length_2", coFloat, L("Flush Length 2"), L("The second flush length."));
|
||||
new_def("flush_length_3", coFloat, L("Flush Length 3"), L("The third flush length."));
|
||||
new_def("flush_length_4", coFloat, L("Flush Length 4"), L("The fourth flush length."));
|
||||
|
||||
// change_extrusion_role_gcode
|
||||
std::string extrusion_role_types = "Possible Values:\n[\"Perimeter\", \"ExternalPerimeter\", "
|
||||
"\"OverhangPerimeter\", \"InternalInfill\", \"SolidInfill\", \"TopSolidInfill\", \"BottomSurface\", \"BridgeInfill\", \"GapFill\", \"Ironing\", "
|
||||
"\"Skirt\", \"Brim\", \"SupportMaterial\", \"SupportMaterialInterface\", \"SupportTransition\", \"WipeTower\", \"Mixed\"]";
|
||||
// The whole tooltip is one literal so that the GUI can look it up in the catalog.
|
||||
def = this->add("extrusion_role", coString);
|
||||
def->label = L("Extrusion role");
|
||||
// TRN The quoted values are G-code identifiers; keep them in English.
|
||||
def->tooltip = L("The new extrusion role/type that is going to be used\nPossible values:\n[\"Perimeter\", \"ExternalPerimeter\", "
|
||||
"\"OverhangPerimeter\", \"InternalInfill\", \"SolidInfill\", \"TopSolidInfill\", \"BottomSurface\", \"BridgeInfill\", \"GapFill\", \"Ironing\", "
|
||||
"\"Skirt\", \"Brim\", \"SupportMaterial\", \"SupportMaterialInterface\", \"SupportTransition\", \"WipeTower\", \"Mixed\"]");
|
||||
|
||||
new_def("extrusion_role", coString, "Extrusion role", "The new extrusion role/type that is going to be used\n" + extrusion_role_types);
|
||||
new_def("last_extrusion_role", coString, "Last extrusion role", "The previously used extrusion role/type\nPossible Values:\n" + extrusion_role_types);
|
||||
def = this->add("last_extrusion_role", coString);
|
||||
def->label = L("Last extrusion role");
|
||||
// TRN The quoted values are G-code identifiers; keep them in English.
|
||||
def->tooltip = L("The previously used extrusion role/type\nPossible values:\n[\"Perimeter\", \"ExternalPerimeter\", "
|
||||
"\"OverhangPerimeter\", \"InternalInfill\", \"SolidInfill\", \"TopSolidInfill\", \"BottomSurface\", \"BridgeInfill\", \"GapFill\", \"Ironing\", "
|
||||
"\"Skirt\", \"Brim\", \"SupportMaterial\", \"SupportMaterialInterface\", \"SupportTransition\", \"WipeTower\", \"Mixed\"]");
|
||||
}
|
||||
|
||||
const CustomGcodeSpecificConfigDef custom_gcode_specific_config_def;
|
||||
|
||||
Reference in New Issue
Block a user