updates for PR #6638 - typos and grammar

Including resolved merge conflicts.

localization/i18n/nl/OrcaSlicer_nl.po

@@ -1119,7 +1119,7 @@ msgid "Path can't be healed from selfintersection and multiple points."
 msgstr ""
 
 msgid ""
-"Final shape constains selfintersection or multiple points with same "
+"Final shape contains self-intersection or multiple points with same "
 "coordinate."
 msgstr ""
 
@@ -3189,7 +3189,7 @@ msgstr "Het uitvoeren van post-processing scripts"
 msgid "Successfully executed post-processing script"
 msgstr "Successfully executed post-processing script"
 
-msgid "Unknown error occured during exporting G-code."
+msgid "Unknown error occurred during exporting G-code."
 msgstr "Onbekende fout opgetreden tijdens exporteren van de G-code."
 
 #, boost-format
@@ -5011,7 +5011,7 @@ msgstr ""
 msgid "Printer camera is malfunctioning."
 msgstr "De printercamera werkt niet goed."
 
-msgid "Problem occured. Please update the printer firmware and try again."
+msgid "Problem occurred. Please update the printer firmware and try again."
 msgstr ""
 "Er heeft zich een probleem voorgedaan. Werk de printerfirmware bij en "
 "probeer het opnieuw."
@@ -6684,11 +6684,11 @@ msgid "If enabled, useful hints are displayed at startup."
 msgstr ""
 "Indien ingeschakeld, worden bij het opstarten nuttige tips weergegeven."
 
-msgid "Flushing volumes: Auto-calculate everytime the color changed."
+msgid "Flushing volumes: Auto-calculate every time the color changed."
 msgstr ""
 "Spoelvolumes: Automatisch berekenen telkens wanneer de kleur verandert."
 
-msgid "If enabled, auto-calculate everytime the color changed."
+msgid "If enabled, auto-calculate every time the color changed."
 msgstr ""
 "Als deze optie is ingeschakeld, wordt elke keer dat de kleur verandert "
 "automatisch berekend."
@@ -6807,7 +6807,7 @@ msgstr ""
 msgid "every"
 msgstr "elke"
 
-msgid "The peroid of backup in seconds."
+msgid "The period of backup in seconds."
 msgstr "De periode van de back-up in seconden."
 
 msgid "Downloads"
@@ -7022,7 +7022,7 @@ msgstr "3mf bestand uploaden"
 msgid "Jump to model publish web page"
 msgstr "Ga naar de website om het model te publiceren"
 
-msgid "Note: The preparation may takes several minutes. Please be patiant."
+msgid "Note: The preparation may takes several minutes. Please be patient."
 msgstr ""
 "Notitie: het voorbereiden kan enkele minuten duren. Even geduld alstublieft."
 
@@ -7458,8 +7458,8 @@ msgstr "Algemene voorwaarden"
 
 msgid ""
 "Thank you for purchasing a Bambu Lab device.Before using your Bambu Lab "
-"device, please read the termsand conditions.By clicking to agree to use your "
-"Bambu Lab device, you agree to abide by the Privacy Policyand Terms of "
+"device, please read the terms and conditions.By clicking to agree to use your "
+"Bambu Lab device, you agree to abide by the Privacy Policy and Terms of "
 "Use(collectively, the \"Terms\"). If you do not comply with or agree to the "
 "Bambu Lab Privacy Policy, please do not use Bambu Lab equipment and services."
 msgstr ""
@@ -7547,7 +7547,7 @@ msgstr ""
 "voorinstelling."
 
 msgid ""
-"Prime tower is required for smooth timeplase. There may be flaws on the "
+"Prime tower is required for smooth timelapse. There may be flaws on the "
 "model without prime tower. Are you sure you want to disable prime tower?"
 msgstr ""
 "Een Prime-toren is vereist voor een vloeiende timeplase-modus. Er kunnen "
@@ -8012,7 +8012,7 @@ msgstr "Versnellingsbeperking"
 msgid "Jerk limitation"
 msgstr "Jerk beperking"
 
-msgid "Single extruder multimaterial setup"
+msgid "Single extruder multi-material setup"
 msgstr ""
 
 msgid "Number of extruders of the printer."
@@ -8031,11 +8031,11 @@ msgstr "Mondstuk diameter"
 msgid "Wipe tower"
 msgstr "Afveegblok"
 
-msgid "Single extruder multimaterial parameters"
+msgid "Single extruder multi-material parameters"
 msgstr "Parameter voor multi-material met één extruder"
 
 msgid ""
-"This is a single extruder multimaterial printer, diameters of all extruders "
+"This is a single extruder multi-material printer, diameters of all extruders "
 "will be set to the new value. Do you want to proceed?"
 msgstr ""
 
@@ -8447,7 +8447,7 @@ msgid "Flushing volumes for filament change"
 msgstr "Volumes reinigen voor filament wijziging"
 
 msgid ""
-"Orca would re-calculate your flushing volumes everytime the filaments color "
+"Orca would re-calculate your flushing volumes every time the filaments color "
 "changed. You could disable the auto-calculate in Orca Slicer > Preferences"
 msgstr ""
 
@@ -8493,7 +8493,7 @@ msgstr ""
 
 msgid ""
 "Missing BambuSource component registered for media playing! Please re-"
-"install BambuStutio or seek after-sales help."
+"install BambuStudio or seek after-sales help."
 msgstr ""
 
 msgid ""
@@ -9777,7 +9777,7 @@ msgid ""
 "The number of bottom solid layers is increased when slicing if the thickness "
 "calculated by bottom shell layers is thinner than this value. This can avoid "
 "having too thin shell when layer height is small. 0 means that this setting "
-"is disabled and thickness of bottom shell is absolutely determained by "
+"is disabled and thickness of bottom shell is absolutely determined by "
 "bottom shell layers"
 msgstr ""
 "Het aantal onderste solide lagen wordt verhoogd tijdens het slicen als de "
@@ -9855,7 +9855,7 @@ msgstr "Drempel voor overhang koeling"
 #, c-format
 msgid ""
 "Force cooling fan to be specific speed when overhang degree of printed part "
-"exceeds this value. Expressed as percentage which indicides how much width "
+"exceeds this value. Expressed as percentage which indicates how much width "
 "of the line without support from lower layer. 0% means forcing cooling for "
 "all outer wall no matter how much overhang degree"
 msgstr ""
@@ -10009,7 +10009,7 @@ msgid ""
 "Silk PLA. It can also help reduce warping on floating regions over "
 "supports.\n"
 "\n"
-"For this setting to be the most effective, it is recomended to set the "
+"For this setting to be the most effective, it is recommended to set the "
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on odd layers irrespective of their overhang degree."
 msgstr ""
@@ -10119,7 +10119,7 @@ msgstr "Rand type"
 
 msgid ""
 "This controls the generation of the brim at outer and/or inner side of "
-"models. Auto means the brim width is analysed and calculated automatically."
+"models. Auto means the brim width is analyzed and calculated automatically."
 msgstr ""
 "This controls the generation of the brim at outer and/or inner side of "
 "models. Auto means the brim width is analyzed and calculated automatically."
@@ -10316,16 +10316,16 @@ msgid ""
 "unsupported internal solid infill. The options below control the amount of "
 "filtering, i.e. the amount of internal bridges created.\n"
 "\n"
-"Filter - enable this option. This is the default behaviour and works well in "
+"Filter - enable this option. This is the default behavior and works well in "
 "most cases.\n"
 "\n"
 "Limited filtering - creates internal bridges on heavily slanted surfaces, "
-"while avoiding creating uncessesary interal bridges. This works well for "
+"while avoiding creating unnecessary internal bridges. This works well for "
 "most difficult models.\n"
 "\n"
 "No filtering - creates internal bridges on every potential internal "
 "overhang. This option is useful for heavily slanted top surface models. "
-"However, in most cases it creates too many unecessary bridges."
+"However, in most cases it creates too many unnecessary bridges."
 msgstr ""
 
 msgid "Filter"
@@ -10473,7 +10473,7 @@ msgid ""
 "Print sequence of the internal (inner) and external (outer) walls. \n"
 "\n"
 "Use Inner/Outer for best overhangs. This is because the overhanging walls "
-"can adhere to a neighouring perimeter while printing. However, this option "
+"can adhere to a neighbouring perimeter while printing. However, this option "
 "results in slightly reduced surface quality as the external perimeter is "
 "deformed by being squashed to the internal perimeter.\n"
 "\n"
@@ -10483,7 +10483,7 @@ msgid ""
 "perimeter to print the external wall against. This option requires a minimum "
 "of 3 walls to be effective as it prints the internal walls from the 3rd "
 "perimeter onwards first, then the external perimeter and, finally, the first "
-"internal perimeter. This option is recomended against the Outer/Inner option "
+"internal perimeter. This option is recommended against the Outer/Inner option "
 "in most cases. \n"
 "\n"
 "Use Outer/Inner for the same external wall quality and dimensional accuracy "
@@ -10511,7 +10511,7 @@ msgid ""
 "first, which works best in most cases.\n"
 "\n"
 "Printing infill first may help with extreme overhangs as the walls have the "
-"neighbouring infill to adhere to. However, the infill will slighly push out "
+"neighbouring infill to adhere to. However, the infill will slightly push out "
 "the printed walls where it is attached to them, resulting in a worse "
 "external surface finish. It can also cause the infill to shine through the "
 "external surfaces of the part."
@@ -10528,7 +10528,7 @@ msgid ""
 "odd is enabled. Set this to any option other than Auto will force the wall "
 "direction regardless of the Reverse on odd.\n"
 "\n"
-"This option will be disabled if sprial vase mode is enabled."
+"This option will be disabled if spiral vase mode is enabled."
 msgstr ""
 
 msgid "Counter clockwise"
@@ -10655,7 +10655,7 @@ msgid "Enable pressure advance"
 msgstr "Pressure advance inschakelen"
 
 msgid ""
-"Enable pressure advance, auto calibration result will be overwriten once "
+"Enable pressure advance, auto calibration result will be overwritten once "
 "enabled."
 msgstr ""
 
@@ -10678,11 +10678,11 @@ msgid ""
 "your printer's extrusion system depending on the volumetric flow speed and "
 "acceleration it is printing at. Internally, it generates a fitted model that "
 "can extrapolate the needed pressure advance for any given volumetric flow "
-"speed and acceleration, which is then emmited to the printer depending on "
+"speed and acceleration, which is then emitted to the printer depending on "
 "the current print conditions.\n"
 "\n"
-"When enabled, the pressure advance value above is overriden. However, a "
-"reasonable default value above is strongly recomended to act as a fallback "
+"When enabled, the pressure advance value above is overridden. However, a "
+"reasonable default value above is strongly recommended to act as a fallback "
 "and for when tool changing.\n"
 "\n"
 msgstr ""
@@ -10706,7 +10706,7 @@ msgid ""
 "feature print speed in your profile (usually its the sparse or solid "
 "infill). Then run them for the same speeds for the slowest and fastest print "
 "accelerations,and no faster than the recommended maximum acceleration as "
-"given by the klipper input shaper.\n"
+"given by the Klipper input shaper.\n"
 "2. Take note of the optimal PA value for each volumetric flow speed and "
 "acceleration. You can find the flow number by selecting flow from the color "
 "scheme drop down and move the horizontal slider over the PA pattern lines. "
@@ -10751,8 +10751,8 @@ msgid "Keep fan always on"
 msgstr "Laat de ventilator aan staan"
 
 msgid ""
-"If enable this setting, part cooling fan will never be stoped and will run "
-"at least at minimum speed to reduce the frequency of starting and stoping"
+"If enable this setting, part cooling fan will never be stopped and will run "
+"at least at minimum speed to reduce the frequency of starting and stopping"
 msgstr ""
 "Als deze instelling is ingeschakeld, zal de printkop ventilator altijd aan "
 "staan op een minimale snelheid om het aantal start en stop momenten te "
@@ -10768,8 +10768,8 @@ msgid ""
 "\n"
 " 1. To avoid changes in shine when printing glossy filaments \n"
 "2. To avoid changes in external wall speed which may create slight wall "
-"artefacts that appear like z banding \n"
-"3. To avoid printing at speeds which cause VFAs (fine artefacts) on the "
+"artifacts that appear like z banding \n"
+"3. To avoid printing at speeds which cause VFAs (fine artifacts) on the "
 "external walls\n"
 "\n"
 msgstr ""
@@ -10860,7 +10860,7 @@ msgid "Pellet flow coefficient"
 msgstr ""
 
 msgid ""
-"Pellet flow coefficient is emperically derived and allows for volume "
+"Pellet flow coefficient is empirically derived and allows for volume "
 "calculation for pellet printers.\n"
 "\n"
 "Internally it is converted to filament_diameter. All other volume "
@@ -10993,23 +10993,23 @@ msgstr ""
 "Deze frase is bewerkt door het Rammingdialoog en bevat parameters voor de "
 "ramming."
 
-msgid "Enable ramming for multitool setups"
+msgid "Enable ramming for multi-tool setups"
 msgstr ""
 
 msgid ""
-"Perform ramming when using multitool printer (i.e. when the 'Single Extruder "
+"Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder "
 "Multimaterial' in Printer Settings is unchecked). When checked, a small "
 "amount of filament is rapidly extruded on the wipe tower just before the "
 "toolchange. This option is only used when the wipe tower is enabled."
 msgstr ""
 
-msgid "Multitool ramming volume"
+msgid "Multi-tool ramming volume"
 msgstr ""
 
 msgid "The volume to be rammed before the toolchange."
 msgstr ""
 
-msgid "Multitool ramming flow"
+msgid "Multi-tool ramming flow"
 msgstr ""
 
 msgid "Flow used for ramming the filament before the toolchange."
@@ -11051,7 +11051,7 @@ msgstr "Verzachtingstemperatuur"
 msgid ""
 "The material softens at this temperature, so when the bed temperature is "
 "equal to or greater than it, it's highly recommended to open the front door "
-"and/or remove the upper glass to avoid cloggings."
+"and/or remove the upper glass to avoid clogging."
 msgstr ""
 "The material softens at this temperature, so when the bed temperature is "
 "equal to or greater than this, it's highly recommended to open the front "
@@ -11338,7 +11338,7 @@ msgid ""
 "This fan speed is enforced during all support interfaces, to be able to "
 "weaken their bonding with a high fan speed.\n"
 "Set to -1 to disable this override.\n"
-"Can only be overriden by disable_fan_first_layers."
+"Can only be overridden by disable_fan_first_layers."
 msgstr ""
 
 msgid ""
@@ -11362,7 +11362,7 @@ msgid "Fuzzy skin thickness"
 msgstr "Fuzzy skin dikte"
 
 msgid ""
-"The width within which to jitter. It's adversed to be below outer wall line "
+"The width within which to jitter. It's advised to be below outer wall line "
 "width"
 msgstr ""
 "De breedte van jittering: het is aan te raden deze lager te houden dan de "
@@ -11372,7 +11372,7 @@ msgid "Fuzzy skin point distance"
 msgstr "Fuzzy skin punt afstand"
 
 msgid ""
-"The average diatance between the random points introducded on each line "
+"The average distance between the random points introduced on each line "
 "segment"
 msgstr ""
 "De gemiddelde afstand tussen de willekeurige punten die op ieder lijnsegment "
@@ -11422,7 +11422,7 @@ msgid ""
 "Enable this to get a G-code file which has G2 and G3 moves. The fitting "
 "tolerance is same as the resolution. \n"
 "\n"
-"Note: For klipper machines, this option is recomended to be disabled. "
+"Note: For Klipper machines, this option is recommended to be disabled. "
 "Klipper does not benefit from arc commands as these are split again into "
 "line segments by the firmware. This results in a reduction in surface "
 "quality as line segments are converted to arcs by the slicer and then back "
@@ -11518,7 +11518,7 @@ msgid ""
 "can use fractional seconds). It assumes infinite acceleration for this time "
 "estimation, and will only take into account G1 and G0 moves (arc fitting is "
 "unsupported).\n"
-"It won't move fan comands from custom gcodes (they act as a sort of "
+"It won't move fan commands from custom gcodes (they act as a sort of "
 "'barrier').\n"
 "It won't move fan comands into the start gcode if the 'only custom start "
 "gcode' is activated.\n"
@@ -11669,7 +11669,7 @@ msgstr ""
 msgid ""
 "Top solid infill area is enlarged slightly to overlap with wall for better "
 "bonding and to minimize the appearance of pinholes where the top infill "
-"meets the walls. A value of 25-30% is a good starting point, minimising the "
+"meets the walls. A value of 25-30% is a good starting point, minimizing the "
 "appearance of pinholes. The percentage value is relative to line width of "
 "sparse infill"
 msgstr ""
@@ -12305,7 +12305,7 @@ msgstr ""
 "om kromtrekken te voorkomen bij het afdrukken met ABS."
 
 msgid ""
-"G-code path is genereated after simplifing the contour of model to avoid too "
+"G-code path is generated after simplifying the contour of model to avoid too "
 "much points and gcode lines in gcode file. Smaller value means higher "
 "resolution and more time to slice"
 msgstr ""
@@ -12485,7 +12485,7 @@ msgstr "Terugtrek (retraction) snelheid"
 msgid "Speed of retractions"
 msgstr "Dit is de snelheid voor terugtrekken (retraction)"
 
-msgid "Deretraction Speed"
+msgid "De-retraction Speed"
 msgstr "Snelheid van terugtrekken (deretraction)"
 
 msgid ""
@@ -12671,15 +12671,15 @@ msgid "Wipe before external loop"
 msgstr ""
 
 msgid ""
-"To minimise visibility of potential overextrusion at the start of an "
+"To minimize visibility of potential overextrusion at the start of an "
 "external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall "
-"print order, the deretraction is performed slightly on the inside from the "
+"print order, the de-retraction is performed slightly on the inside from the "
 "start of the external perimeter. That way any potential over extrusion is "
 "hidden from the outside surface. \n"
 "\n"
 "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall "
 "print order as in these modes it is more likely an external perimeter is "
-"printed immediately after a deretraction move."
+"printed immediately after a de-retraction move."
 msgstr ""
 
 msgid "Wipe speed"
@@ -12806,10 +12806,10 @@ msgid "Smooth Spiral"
 msgstr "Smooth Spiral"
 
 msgid ""
-"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam "
+"Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam "
 "at all, even in the XY directions on walls that are not vertical"
 msgstr ""
-"Smooth Spiral smoothes out X and Y moves as wellresulting in no visible seam "
+"Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam "
 "at all, even in the XY directions on walls that are not vertical"
 
 msgid "Max XY Smoothing"
@@ -13438,7 +13438,7 @@ msgid ""
 "The number of top solid layers is increased when slicing if the thickness "
 "calculated by top shell layers is thinner than this value. This can avoid "
 "having too thin shell when layer height is small. 0 means that this setting "
-"is disabled and thickness of top shell is absolutely determained by top "
+"is disabled and thickness of top shell is absolutely determined by top "
 "shell layers"
 msgstr ""
 "Het aantal bovenste solide lagen wordt verhoogd tijdens het slicen als de "
@@ -13466,7 +13466,7 @@ msgid "Wipe Distance"
 msgstr "Veeg afstand"
 
 msgid ""
-"Discribe how long the nozzle will move along the last path when "
+"Describe how long the nozzle will move along the last path when "
 "retracting. \n"
 "\n"
 "Depending on how long the wipe operation lasts, how fast and long the "
@@ -13669,7 +13669,7 @@ msgstr ""
 msgid ""
 "Maximum defection of a point to the estimated radius of the circle.\n"
 "As cylinders are often exported as triangles of varying size, points may not "
-"be on the circle circumference. This setting allows you some leway to "
+"be on the circle circumference. This setting allows you some leeway to "
 "broaden the detection.\n"
 "In mm or in % of the radius."
 msgstr ""
@@ -13703,7 +13703,7 @@ msgstr "Relatieve E-afstanden gebruiken"
 
 msgid ""
 "Relative extrusion is recommended when using \"label_objects\" option.Some "
-"extruders work better with this option unckecked (absolute extrusion mode). "
+"extruders work better with this option unchecked (absolute extrusion mode). "
 "Wipe tower is only compatible with relative mode. It is recommended on most "
 "printers. Default is checked"
 msgstr ""
@@ -13812,7 +13812,7 @@ msgid ""
 "NOTE: Bottom and top surfaces will not be affected by this value to prevent "
 "visual gaps on the ouside of the model. Adjust 'One wall threshold' in the "
 "Advanced settings below to adjust the sensitivity of what is considered a "
-"top-surface. 'One wall threshold' is only visibile if this setting is set "
+"top-surface. 'One wall threshold' is only visible if this setting is set "
 "above the default value of 0.5, or if single-wall top surfaces is enabled."
 msgstr ""
 "Pas deze waarde aan om te voorkomen dat korte, niet-gesloten wanden worden "
@@ -13859,7 +13859,7 @@ msgstr "Detecteer dichte interne solide vulling (infill)"
 msgid ""
 "This option will auto detect narrow internal solid infill area. If enabled, "
 "concentric pattern will be used for the area to speed printing up. "
-"Otherwise, rectilinear pattern is used defaultly."
+"Otherwise, rectilinear pattern is used by default."
 msgstr ""
 "Deze optie detecteert automatisch smalle interne solide opvul (infill) "
 "gebieden. Indien ingeschakeld, wordt het concentrische patroon gebruikt voor "
@@ -13939,19 +13939,19 @@ msgstr ""
 msgid ""
 "Position of the extruder at the beginning of the custom G-code block. If the "
 "custom G-code travels somewhere else, it should write to this variable so "
-"PrusaSlicer knows where it travels from when it gets control back."
+"OrcaSlicer knows where it travels from when it gets control back."
 msgstr ""
 
 msgid ""
 "Retraction state at the beginning of the custom G-code block. If the custom "
 "G-code moves the extruder axis, it should write to this variable so "
-"PrusaSlicer deretracts correctly when it gets control back."
+"OrcaSlicer de-retracts correctly when it gets control back."
 msgstr ""
 
-msgid "Extra deretraction"
+msgid "Extra de-retraction"
 msgstr ""
 
-msgid "Currently planned extra extruder priming after deretraction."
+msgid "Currently planned extra extruder priming after de-retraction."
 msgstr ""
 
 msgid "Absolute E position"
@@ -14001,7 +14001,7 @@ msgstr ""
 msgid "Is extruder used?"
 msgstr ""
 
-msgid "Vector of bools stating whether a given extruder is used in the print."
+msgid "Vector of booleans stating whether a given extruder is used in the print."
 msgstr ""
 
 msgid "Has single extruder MM priming"
@@ -15201,7 +15201,7 @@ msgstr ""
 msgid "Filament type is not selected, please reselect type."
 msgstr "Het type draad is niet geselecteerd, selecteer het type opnieuw."
 
-msgid "Filament serial is not inputed, please input serial."
+msgid "Filament serial is not entered, please enter serial."
 msgstr "Filament serial missing; please input serial."
 
 msgid ""
@@ -15271,7 +15271,7 @@ msgstr "Preset importeren"
 msgid "Create Type"
 msgstr "Type maken"
 
-msgid "The model is not found, place reselect vendor."
+msgid "The model is not found, please reselect vendor."
 msgstr "The model was not found; please reselect vendor."
 
 msgid "Select Model"
@@ -15320,10 +15320,10 @@ msgstr "Preset-pad niet gevonden; selecteer leverancier opnieuw."
 msgid "The printer model was not found, please reselect."
 msgstr "Het printermodel is niet gevonden, selecteer opnieuw."
 
-msgid "The nozzle diameter is not found, place reselect."
+msgid "The nozzle diameter is not found, please reselect."
 msgstr "De diameter van het mondstuk is niet gevonden. Selecteer opnieuw."
 
-msgid "The printer preset is not found, place reselect."
+msgid "The printer preset is not found, please reselect."
 msgstr "The printer preset was not found; please reselect."
 
 msgid "Printer Preset"
@@ -15355,7 +15355,7 @@ msgstr ""
 "U hebt een niet toegestaan teken ingevoerd in het gedeelte van het "
 "afdrukbare gebied op de eerste pagina. Gebruik alleen cijfers."
 
-msgid "The custom printer or model is not inputed, place input."
+msgid "The custom printer or model is not entered, please enter it."
 msgstr "The custom printer or model missing; please input."
 
 msgid ""
@@ -15394,7 +15394,7 @@ msgid "Current vendor has no models, please reselect."
 msgstr "De huidige leverancier heeft geen modellen. Selecteer opnieuw."
 
 msgid ""
-"You have not selected the vendor and model or inputed the custom vendor and "
+"You have not selected the vendor and model or entered the custom vendor and "
 "model."
 msgstr ""
 "U hebt de verkoper en het model niet geselecteerd of de aangepaste verkoper "
@@ -15519,7 +15519,7 @@ msgid ""
 msgstr ""
 
 msgid ""
-"User's fillment preset set. \n"
+"User's filament preset set. \n"
 "Can be shared with others."
 msgstr ""
 "Ingestelde preset vullingsset van de gebruiker.\n"
@@ -15753,7 +15753,7 @@ msgstr "Connection to Duet is working correctly."
 msgid "Could not connect to Duet"
 msgstr "Kan geen verbinding maken met Duet"
 
-msgid "Unknown error occured"
+msgid "Unknown error occurred"
 msgstr "Onbekende fout opgetreden"
 
 msgid "Wrong password"