diff --git a/deps_src/imgui/imstb_textedit.h b/deps_src/imgui/imstb_textedit.h index 7644670975..3733bb2fa9 100644 --- a/deps_src/imgui/imstb_textedit.h +++ b/deps_src/imgui/imstb_textedit.h @@ -465,6 +465,57 @@ static void stb_textedit_click(STB_TEXTEDIT_STRING *str, STB_TexteditState *stat STB_TEXTEDIT_LAYOUTROW(&r, str, 0); y = r.ymin; } + else + { + // In multi-line mode, clamp y to stay within the text vertical bounds. + // This lets the click still land at a valid location if the mouse is slightly + // above or below the text. + StbTexteditRow r; + int n = STB_TEXTEDIT_STRINGLEN(str); + int i = 0; + float base_y = 0, y_min, y_max; + + // Get the first row to establish y_min and start the iteration + STB_TEXTEDIT_LAYOUTROW(&r, str, 0); + if (r.num_chars <= 0) + { + state->cursor = 0; + state->select_start = state->cursor; + state->select_end = state->cursor; + state->has_preferred_x = 0; + return; + } + y_min = r.ymin; + y_max = base_y + r.ymax; + i = r.num_chars; + base_y += r.baseline_y_delta; + + // Walk the remaining rows to find the bottom of the last row + while (i < n) + { + STB_TEXTEDIT_LAYOUTROW(&r, str, i); + if (r.num_chars <= 0) + break; + y_max = base_y + r.ymax; + i += r.num_chars; + base_y += r.baseline_y_delta; + } + + // If the text ends with a newline, account for the empty trailing line + // so the cursor can be placed on it + if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE) + { + STB_TEXTEDIT_LAYOUTROW(&r, str, n); + y_max = base_y + r.ymax; + } + + // Subtract half the last line height to avoid rounding issues when the mouse + // is just barely below the last line (keep cursor on the last line, not after the text) + y_max -= (r.ymax - r.ymin) * 0.5f; + + if (y < y_min) y = y_min; + if (y > y_max) y = y_max; + } state->cursor = stb_text_locate_coord(str, x, y); state->select_start = state->cursor; @@ -485,6 +536,50 @@ static void stb_textedit_drag(STB_TEXTEDIT_STRING *str, STB_TexteditState *state STB_TEXTEDIT_LAYOUTROW(&r, str, 0); y = r.ymin; } + else + { + // In multi-line mode, clamp y to stay within the text vertical bounds. + // This lets the drag keep working if the mouse goes off the top or bottom of the text. + StbTexteditRow r; + int n = STB_TEXTEDIT_STRINGLEN(str); + int i = 0; + float base_y = 0, y_min, y_max; + + // Get the first row to establish y_min and start the iteration + STB_TEXTEDIT_LAYOUTROW(&r, str, 0); + if (r.num_chars <= 0) + return; + y_min = r.ymin; + y_max = base_y + r.ymax; + i = r.num_chars; + base_y += r.baseline_y_delta; + + // Walk the remaining rows to find the bottom of the last row + while (i < n) + { + STB_TEXTEDIT_LAYOUTROW(&r, str, i); + if (r.num_chars <= 0) + break; + y_max = base_y + r.ymax; + i += r.num_chars; + base_y += r.baseline_y_delta; + } + + // If the text ends with a newline, account for the empty trailing line + // so the cursor can be placed on it + if (n > 0 && STB_TEXTEDIT_GETCHAR(str, n - 1) == STB_TEXTEDIT_NEWLINE) + { + STB_TEXTEDIT_LAYOUTROW(&r, str, n); + y_max = base_y + r.ymax; + } + + // Subtract half the last line height to avoid rounding issues when the mouse + // is just barely below the last line (keep cursor on the last line, not after the text) + y_max -= (r.ymax - r.ymin) * 0.5f; + + if (y < y_min) y = y_min; + if (y > y_max) y = y_max; + } if (state->select_start == state->select_end) state->select_start = state->cursor; diff --git a/resources/profiles/Custom.json b/resources/profiles/Custom.json index a416f17db0..0429742c88 100644 --- a/resources/profiles/Custom.json +++ b/resources/profiles/Custom.json @@ -1,6 +1,6 @@ { "name": "Custom Printer", - "version": "02.04.00.01", + "version": "02.04.00.02", "force_update": "0", "description": "My configurations", "machine_model_list": [ diff --git a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json index 1683513dbd..bf48e0488b 100644 --- a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json @@ -24,12 +24,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json index 5cc46deb7e..ad26608bff 100644 --- a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json @@ -24,12 +24,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json index 0c8918427d..d710282360 100644 --- a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json @@ -24,12 +24,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json index a7d86885ef..481fd04152 100644 --- a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json @@ -24,12 +24,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json index d80b197394..47f175c277 100644 --- a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json @@ -25,12 +25,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json index 693551c428..95e47a32a8 100644 --- a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json @@ -25,12 +25,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json index cf1db6e225..b8fe088325 100644 --- a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json @@ -25,12 +25,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json index 6ae729d622..4a766aa3ef 100644 --- a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json @@ -25,12 +25,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json index ccb6d16c73..6fe168abcc 100644 --- a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json @@ -25,12 +25,6 @@ "filament_loading_speed_start": [ "50" ], - "filament_multitool_ramming": [ - "1" - ], - "filament_multitool_ramming_flow": [ - "40" - ], "filament_stamping_distance": [ "45" ], diff --git a/resources/profiles/Custom/machine/fdm_klipper_common.json b/resources/profiles/Custom/machine/fdm_klipper_common.json index 36f3fe13c6..a0ee0f1a47 100644 --- a/resources/profiles/Custom/machine/fdm_klipper_common.json +++ b/resources/profiles/Custom/machine/fdm_klipper_common.json @@ -116,7 +116,7 @@ "deretraction_speed": [ "30" ], - "z_hop_types": "Normal Lift", + "z_hop_types": "Slope Lift", "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", diff --git a/resources/profiles/Custom/machine/fdm_repetier_common.json b/resources/profiles/Custom/machine/fdm_repetier_common.json index 1171559086..b36b716e4e 100644 --- a/resources/profiles/Custom/machine/fdm_repetier_common.json +++ b/resources/profiles/Custom/machine/fdm_repetier_common.json @@ -118,7 +118,7 @@ "deretraction_speed": [ "30" ], - "z_hop_types": "Normal Lift", + "z_hop_types": "Slope Lift", "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", diff --git a/resources/profiles/Custom/machine/fdm_rrf_common.json b/resources/profiles/Custom/machine/fdm_rrf_common.json index 68708490a1..2fc9df9a3d 100644 --- a/resources/profiles/Custom/machine/fdm_rrf_common.json +++ b/resources/profiles/Custom/machine/fdm_rrf_common.json @@ -116,7 +116,7 @@ "deretraction_speed": [ "30" ], - "z_hop_types": "Normal Lift", + "z_hop_types": "Slope Lift", "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", diff --git a/resources/profiles/Custom/machine/fdm_toolchanger_common.json b/resources/profiles/Custom/machine/fdm_toolchanger_common.json index ff702d0034..7ef8b5207c 100644 --- a/resources/profiles/Custom/machine/fdm_toolchanger_common.json +++ b/resources/profiles/Custom/machine/fdm_toolchanger_common.json @@ -172,11 +172,11 @@ "0.4" ], "z_hop_types": [ - "Normal Lift", - "Normal Lift", - "Normal Lift", - "Normal Lift", - "Normal Lift" + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift" ], "purge_in_prime_tower": "0", "machine_pause_gcode": "M601", diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json index cd9abd8b0d..9701c6eb0d 100644 --- a/resources/profiles/OrcaFilamentLibrary.json +++ b/resources/profiles/OrcaFilamentLibrary.json @@ -1,6 +1,6 @@ { "name": "OrcaFilamentLibrary", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Orca Filament Library", "filament_list": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json index 5a4e910502..c455832b9c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json @@ -36,6 +36,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_type": [ "PET-CF" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json index 9117643990..755f78cf08 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json @@ -39,6 +39,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json index 69cfb1dab7..0026f408f2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json @@ -39,6 +39,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json index 889822b02f..1f11ddcc54 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json @@ -21,6 +21,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_type": [ "PLA-AERO" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json index 49fdcb1e1b..1dea20d081 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json @@ -27,6 +27,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_scarf_seam_type": [ "none" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json index 3fe47727e1..bf714a0352 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json @@ -21,6 +21,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json index 00834bb4a5..a4b0ebce09 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json @@ -36,6 +36,9 @@ "filament_max_volumetric_speed": [ "1" ], + "filament_multitool_ramming_flow": [ + "1" + ], "filament_retraction_minimum_travel": [ "3" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json index d6ca0d695b..b4da81db72 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json @@ -72,15 +72,6 @@ "fan_min_speed": [ "10" ], - "filament_cooling_final_speed": [ - "0" - ], - "filament_cooling_initial_speed": [ - "0" - ], - "filament_cooling_moves": [ - "0" - ], "filament_cost": [ "599" ], @@ -99,30 +90,12 @@ "filament_is_support": [ "0" ], - "filament_loading_speed": [ - "0" - ], - "filament_loading_speed_start": [ - "0" - ], "filament_long_retractions_when_cut": [ "nil" ], "filament_max_volumetric_speed": [ "15" ], - "filament_minimal_purge_on_wipe_tower": [ - "0" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], "filament_notes": [ "" ], @@ -165,21 +138,6 @@ "filament_soluble": [ "0" ], - "filament_stamping_distance": [ - "0" - ], - "filament_stamping_loading_speed": [ - "0" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "0" - ], - "filament_unloading_speed_start": [ - "0" - ], "filament_vendor": [ "Elas" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json index 478210bb7d..8b6db5d3ad 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json @@ -42,15 +42,6 @@ "fan_min_speed": [ "20" ], - "filament_cooling_final_speed": [ - "0" - ], - "filament_cooling_initial_speed": [ - "0" - ], - "filament_cooling_moves": [ - "0" - ], "filament_cost": [ "445" ], @@ -69,30 +60,12 @@ "filament_is_support": [ "0" ], - "filament_loading_speed": [ - "0" - ], - "filament_loading_speed_start": [ - "0" - ], "filament_long_retractions_when_cut": [ "1" ], "filament_max_volumetric_speed": [ "18" ], - "filament_minimal_purge_on_wipe_tower": [ - "0" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], "filament_notes": [ "" ], @@ -135,21 +108,6 @@ "filament_soluble": [ "0" ], - "filament_stamping_distance": [ - "0" - ], - "filament_stamping_loading_speed": [ - "0" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "0" - ], - "filament_unloading_speed_start": [ - "0" - ], "filament_wipe": [ "nil" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json index abfa611aa3..d3f34beb80 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json @@ -71,15 +71,6 @@ "fan_min_speed": [ "60" ], - "filament_cooling_final_speed": [ - "0" - ], - "filament_cooling_initial_speed": [ - "0" - ], - "filament_cooling_moves": [ - "0" - ], "filament_cost": [ "449.5" ], @@ -98,30 +89,12 @@ "filament_is_support": [ "0" ], - "filament_loading_speed": [ - "0" - ], - "filament_loading_speed_start": [ - "0" - ], "filament_long_retractions_when_cut": [ "nil" ], "filament_max_volumetric_speed": [ "25" ], - "filament_minimal_purge_on_wipe_tower": [ - "0" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], "filament_notes": [ "" ], @@ -164,21 +137,6 @@ "filament_soluble": [ "0" ], - "filament_stamping_distance": [ - "0" - ], - "filament_stamping_loading_speed": [ - "0" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "0" - ], - "filament_unloading_speed_start": [ - "0" - ], "filament_vendor": [ "Elas" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json index 38313d1d55..41fd91f011 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json @@ -71,15 +71,6 @@ "fan_min_speed": [ "100" ], - "filament_cooling_final_speed": [ - "0" - ], - "filament_cooling_initial_speed": [ - "0" - ], - "filament_cooling_moves": [ - "0" - ], "filament_cost": [ "500" ], @@ -98,30 +89,12 @@ "filament_is_support": [ "0" ], - "filament_loading_speed": [ - "0" - ], - "filament_loading_speed_start": [ - "0" - ], "filament_long_retractions_when_cut": [ "nil" ], "filament_max_volumetric_speed": [ "18" ], - "filament_minimal_purge_on_wipe_tower": [ - "0" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], "filament_notes": [ "" ], @@ -164,21 +137,6 @@ "filament_soluble": [ "0" ], - "filament_stamping_distance": [ - "0" - ], - "filament_stamping_loading_speed": [ - "0" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "0" - ], - "filament_unloading_speed_start": [ - "0" - ], "filament_vendor": [ "Elas" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json index d7dd19c086..7d22d28387 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json @@ -24,6 +24,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "nozzle_temperature": [ "290" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json index d6cd360eba..997f38ed4d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json @@ -35,6 +35,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_vendor": [ "Elegoo" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json index abae441db5..3d6c95ed00 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json @@ -12,6 +12,9 @@ "filament_max_volumetric_speed": [ "10" ], + "filament_multitool_ramming_flow": [ + "10" + ], "nozzle_temperature": [ "220" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json index b40ce2310b..dff734c96d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json @@ -44,5 +44,8 @@ ], "filament_max_volumetric_speed": [ "10" + ], + "filament_multitool_ramming_flow": [ + "10" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json index 843cf72fc5..1c3184da11 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json @@ -44,5 +44,8 @@ ], "filament_max_volumetric_speed": [ "8" + ], + "filament_multitool_ramming_flow": [ + "8" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json index f7b9df437a..cf01ddf65b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json @@ -10,5 +10,8 @@ "filament_type": [ "PA-CF" ], + "filament_multitool_ramming_flow": [ + "8" + ], "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json index e402cdf775..25cf20c304 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json @@ -8,5 +8,8 @@ "filament_max_volumetric_speed": [ "20" ], + "filament_multitool_ramming_flow": [ + "20" + ], "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json index 5ee99ffed9..30884cf5a0 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json @@ -17,6 +17,9 @@ "filament_max_volumetric_speed": [ "11.5" ], + "filament_multitool_ramming_flow": [ + "13" + ], "overhang_fan_speed": [ "100" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json index 041ff59c44..1880ca2b21 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json @@ -12,6 +12,9 @@ "filament_max_volumetric_speed": [ "18" ], + "filament_multitool_ramming_flow": [ + "25" + ], "slow_down_layer_time": [ "4" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json index d3a6d4813c..39c71d0d62 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json @@ -8,6 +8,9 @@ "filament_max_volumetric_speed": [ "11" ], + "filament_multitool_ramming_flow": [ + "11" + ], "filament_retraction_length": [ "0.8" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json index 65420e9dae..a7c1bbff00 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json @@ -15,6 +15,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_type": [ "PP-CF" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json index 931ee4b7b3..cf9ea7ace2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json @@ -15,6 +15,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_type": [ "PP-GF" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Air PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Air PLA @base.json index 39e351a24c..98d390e9b8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Air PLA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/Overture Air PLA @base.json @@ -17,6 +17,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_vendor": [ "Overture" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json index d873590f08..258f80fb15 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json @@ -23,6 +23,9 @@ "filament_max_volumetric_speed": [ "7.5" ], + "filament_multitool_ramming_flow": [ + "7.5" + ], "filament_vendor": [ "Valment" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json index 6d9d015c11..dea3f03264 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_abs.json @@ -43,6 +43,12 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "15" + ], + "filament_multitool_ramming_volume": [ + "10" + ], "filament_type": [ "ABS" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json index 922a5eaa7a..09a29ce792 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_asa.json @@ -43,6 +43,12 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "12" + ], + "filament_multitool_ramming_volume": [ + "10" + ], "filament_type": [ "ASA" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json index d37476f458..cd15600a52 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_bvoh.json @@ -41,6 +41,15 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "6" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], "filament_type": [ "BVOH" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json index ce95ca7c52..3ff7e805ae 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_common.json @@ -66,6 +66,12 @@ "filament_minimal_purge_on_wipe_tower": [ "15" ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "5" + ], "filament_retract_before_wipe": [ "nil" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json index 80ffd173de..798f560e01 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_cope.json @@ -41,6 +41,9 @@ "filament_max_volumetric_speed": [ "16" ], + "filament_multitool_ramming_flow": [ + "16" + ], "filament_scarf_seam_type": [ "none" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json index bf1ff86af1..40498a05aa 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_eva.json @@ -8,6 +8,9 @@ "filament_type": [ "EVA" ], + "filament_multitool_ramming_flow": [ + "12" + ], "supertack_plate_temp": [ "0" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json index beaebbd0e7..f67709b4b2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_hips.json @@ -41,6 +41,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_type": [ "HIPS" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json index c2e4cf86df..185af32de7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pa.json @@ -44,6 +44,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "12" + ], "filament_type": [ "PA" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json index 058469ff71..2a1ca6d510 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_paht.json @@ -7,6 +7,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "12" + ], "filament_type": [ "PAHT" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json index 0f550063ad..d8fb7d00ae 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pc.json @@ -86,6 +86,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "16" + ], "filament_flow_ratio": [ "0.94" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json index 8ca7e39994..e656fb7715 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pctg.json @@ -26,6 +26,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "10" + ], "filament_type": [ "PCTG" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json index beb533d07f..a47543334b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pe.json @@ -38,6 +38,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "12" + ], "filament_type": [ "PE" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json index eabb12c708..8b3fef2f2b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pet.json @@ -26,6 +26,9 @@ "filament_max_volumetric_speed": [ "10" ], + "filament_multitool_ramming_flow": [ + "15" + ], "filament_type": [ "PETG" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json index f6ef3ffc0c..7719c6563d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pha.json @@ -38,6 +38,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_type": [ "PHA" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json index ae82d44129..21b7c44365 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla.json @@ -38,6 +38,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "20" + ], "filament_scarf_seam_type": [ "none" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json index 3680a85602..a5fd601060 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pla_silk.json @@ -9,6 +9,9 @@ "filament_flow_ratio": [ "0.98" ], + "filament_multitool_ramming_flow": [ + "10" + ], "slow_down_layer_time": [ "8" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json index ec9405ef9a..4df7753132 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pp.json @@ -38,6 +38,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "12" + ], "filament_type": [ "PP" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json index 3eac71bc69..c250e588b0 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_ppa.json @@ -47,6 +47,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_type": [ "PPA-CF" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json index a6a95a804e..49e0bddefd 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pps.json @@ -43,6 +43,9 @@ "filament_max_volumetric_speed": [ "4" ], + "filament_multitool_ramming_flow": [ + "4" + ], "filament_type": [ "PPS" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json index 0109726b0d..4bb30d7e11 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_pva.json @@ -40,6 +40,15 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "6" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], "filament_soluble": [ "1" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json index 96626d808d..9bc4d5ce36 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_sbs.json @@ -11,6 +11,9 @@ "filament_max_volumetric_speed": [ "12" ], + "filament_multitool_ramming_flow": [ + "12" + ], "filament_type": [ "SBS" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json index 30d9415ad3..d6fb38a6ba 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/base/fdm_filament_tpu.json @@ -43,6 +43,15 @@ "filament_max_volumetric_speed": [ "3.2" ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "3.2" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], "filament_retraction_length": [ "0.4" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Marble @base.json b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Marble @base.json index 40c314585c..cbd4f84ed4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Marble @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Marble @base.json @@ -17,6 +17,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_vendor": [ "eSUN" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Matte @base.json index 85c6049935..8d22168408 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Matte @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN PLA-Matte @base.json @@ -17,6 +17,9 @@ "filament_max_volumetric_speed": [ "8" ], + "filament_multitool_ramming_flow": [ + "8" + ], "filament_vendor": [ "eSUN" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json index 138a388419..732eb3fd5b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/eSUN/eSUN ePLA-LW @System.json @@ -21,6 +21,9 @@ "filament_max_volumetric_speed": [ "6" ], + "filament_multitool_ramming_flow": [ + "6" + ], "filament_vendor": [ "eSUN" ], diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index cdc7f0fe81..ab2433242e 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.07", + "version": "02.04.00.08", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ @@ -426,10 +426,6 @@ "name": "0.16 Optimal @Snapmaker U1 (0.4 nozzle)", "sub_path": "process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json" }, - { - "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)", - "sub_path": "process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json" - }, { "name": "0.20 Quality @Snapmaker U1 (0.4 nozzle)", "sub_path": "process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json" @@ -486,6 +482,66 @@ "name": "fdm_process_U1_0.8_common", "sub_path": "process/fdm_process_U1_0.8_common.json" }, + { + "name": "fdm_process_U1_0.06_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.06_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.08_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.08_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.10_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.10_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.12_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.12_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.14_nozzle_0.2", + "sub_path": "process/fdm_process_U1_0.14_nozzle_0.2.json" + }, + { + "name": "fdm_process_U1_0.18_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.18_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.24_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.24_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.24_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.24_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.30_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.30_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.32_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.32_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.36_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.36_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.40_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.40_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.42_nozzle_0.6", + "sub_path": "process/fdm_process_U1_0.42_nozzle_0.6.json" + }, + { + "name": "fdm_process_U1_0.48_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.48_nozzle_0.8.json" + }, + { + "name": "fdm_process_U1_0.56_nozzle_0.8", + "sub_path": "process/fdm_process_U1_0.56_nozzle_0.8.json" + }, { "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", "sub_path": "process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json" @@ -1508,10 +1564,6 @@ "name": "Snapmaker PLA Metal @U1", "sub_path": "filament/Snapmaker PLA Metal @U1.json" }, - { - "name": "Snapmaker PLA Silk @U1", - "sub_path": "filament/Snapmaker PLA Silk @U1.json" - }, { "name": "Snapmaker PLA Silk", "sub_path": "filament/Snapmaker PLA Silk.json" @@ -1671,6 +1723,214 @@ { "name": "Snapmaker PLA Matte @U1 base", "sub_path": "filament/Snapmaker PLA Matte @U1 base.json" + }, + { + "name": "Polymaker PLA @U1 base", + "sub_path": "filament/Polymaker PLA @U1 base.json" + }, + { + "name": "Polymaker Silk PLA Family @U1", + "sub_path": "filament/Polymaker Silk PLA Family @U1.json" + }, + { + "name": "Polymaker Tough PLA Family @U1", + "sub_path": "filament/Polymaker Tough PLA Family @U1.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 base2", + "sub_path": "filament/Snapmaker PETG HF @U1 base2.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 base", + "sub_path": "filament/Snapmaker PETG Translucent @U1 base.json" + }, + { + "name": "Snapmaker PLA Basic @U1 base", + "sub_path": "filament/Snapmaker PLA Basic @U1 base.json" + }, + { + "name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Glow @U1 base", + "sub_path": "filament/Snapmaker PLA Glow @U1 base.json" + }, + { + "name": "Snapmaker PLA Matte @U1 base2", + "sub_path": "filament/Snapmaker PLA Matte @U1 base2.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Silk @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 base2", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 base2.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 base", + "sub_path": "filament/Snapmaker PLA Translucent @U1 base.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Wood @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Wood @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA-CF @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA-CF @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PVA @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PVA @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PVA @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker TPU 90A @U1", + "sub_path": "filament/Snapmaker TPU 90A @U1.json" + }, + { + "name": "Snapmaker TPU 90A @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker TPU 90A @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker TPU 90A @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1", + "sub_path": "filament/Snapmaker TPU 95A HF @U1.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker TPU 95A HF @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA Silk @U1", + "sub_path": "filament/Snapmaker PLA Silk @U1.json" + }, + { + "name": "Polymaker General PLA Family @U1", + "sub_path": "filament/Polymaker General PLA Family @U1.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PETG HF @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PETG HF @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PETG Translucent @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA Basic @U1", + "sub_path": "filament/Snapmaker PLA Basic @U1.json" + }, + { + "name": "Snapmaker PLA Glow @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Glow @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Matte @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Matte @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.2 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.4 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.6 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json" + }, + { + "name": "Snapmaker PLA Translucent @U1 0.8 nozzle", + "sub_path": "filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json" } ], "machine_list": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json new file mode 100644 index 0000000000..c706ba776d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker General PLA Family @U1.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Polymaker General PLA Family @U1", + "inherits": "Polymaker PLA @U1 base", + "from": "system", + "setting_id": "thXfSaUkOAKJ50ey", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "temperature_vitrification": [ + "62" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json new file mode 100644 index 0000000000..b27c48f720 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker PLA @U1 base.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Polymaker PLA @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OGFL99", + "instantiation": "false", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Generic" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "15%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_shrink": [ + "100%" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json new file mode 100644 index 0000000000..b6bd119022 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker Silk PLA Family @U1.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Polymaker Silk PLA Family @U1", + "inherits": "Polymaker PLA @U1 base", + "from": "system", + "setting_id": "h8vIYpXbxFtHPV6e", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_density": [ + "1.34" + ], + "filament_vendor": [ + "Polymaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json new file mode 100644 index 0000000000..e5c2c7d7f6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Polymaker Tough PLA Family @U1.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "Polymaker Tough PLA Family @U1", + "inherits": "Polymaker PLA @U1 base", + "from": "system", + "setting_id": "d6CC81Es2hp46bto", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_vendor": [ + "Polymaker" + ], + "slow_down_layer_time": [ + "6" + ], + "temperature_vitrification": [ + "55" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json index 31799163c6..b38925e01b 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon ASA-CF08 @Snapmaker U1.json @@ -11,7 +11,6 @@ "filament_minimal_purge_on_wipe_tower": [ "15" ], - "pressure_advance": [ "0.05" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json index fd99eee105..1bb569c291 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA12-CF10 @Snapmaker U1.json @@ -17,7 +17,6 @@ "filament_z_hop": [ "0.0" ], - "enable_pressure_advance": [ "1" ], diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json index 1b227b2fd0..d6106faa50 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PA6-CF20 @Snapmaker U1.json @@ -17,7 +17,6 @@ "filament_z_hop": [ "0.0" ], - "enable_pressure_advance": [ "1" ], diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json index cfe6890a80..6e1797904c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Fiberon PETG-ESD @Snapmaker U1.json @@ -17,7 +17,6 @@ "supertack_plate_temp_initial_layer": [ "70" ], - "pressure_advance": [ "0.04" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json index 707d5ae54b..f4703d6c40 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyLite Dual PLA @0.2 nozzle", - "setting_id": "jhmy4YHi9MuL0DWu", "inherits": "PolyLite PLA @0.2 nozzle", + "from": "system", + "setting_id": "jhmy4YHi9MuL0DWu", + "instantiation": "true", "compatible_printers": [ "Snapmaker A250 Dual (0.2 nozzle)", "Snapmaker A250 Dual BKit (0.2 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json index 1a4422472c..e1ce855c61 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyLite J1 PLA @0.2 nozzle", - "setting_id": "jFlRSxx0KvN3BOUu", "inherits": "PolyLite PLA @0.2 nozzle", + "from": "system", + "setting_id": "jFlRSxx0KvN3BOUu", + "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.2 nozzle)" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json index 6c5017d0a8..55d39a0832 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyLite J1 PLA", - "setting_id": "wcpOTTMyZNPFKyXr", "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "wcpOTTMyZNPFKyXr", + "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.4 nozzle)", "Snapmaker J1 (0.6 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json index cd5f75a463..579940a5b2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Base.json @@ -1,4 +1,9 @@ { + "type": "filament", + "name": "PolyLite PETG @Base", + "inherits": "fdm_filament_petg", + "from": "system", + "instantiation": "false", "filament_density": [ "1.25" ], @@ -18,11 +23,6 @@ "0" ], "description": "", - "inherits": "fdm_filament_petg", - "name": "PolyLite PETG @Base", - "type": "filament", - "instantiation": "false", - "from": "system", "filament_vendor": [ "Polymaker" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json index 47cf37385d..f51cc5eeec 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG @Snapmaker U1.json @@ -17,7 +17,6 @@ "supertack_plate_temp_initial_layer": [ "70" ], - "pressure_advance": [ "0.05" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json index 6089dd66c4..a3efeee371 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PETG Translucent @Snapmaker U1.json @@ -17,7 +17,6 @@ "supertack_plate_temp_initial_layer": [ "70" ], - "pressure_advance": [ "0.05" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json index c3897e63c2..fcceb14014 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyLite PLA @0.2 nozzle", - "setting_id": "s9mdMaFca8SHfji9", "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "s9mdMaFca8SHfji9", + "instantiation": "true", "compatible_printers": [ "Snapmaker A250 (0.2 nozzle)", "Snapmaker A250 BKit (0.2 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json index 4173572637..3a4621b838 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite PLA @base.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "false", "name": "PolyLite PLA @base", - "filament_id": "1393866034", "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "1393866034", + "instantiation": "false", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json index b45068dd52..3f8cbc7674 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyTerra Dual PLA @0.2 nozzle", - "setting_id": "UQYgjH1uVxf3d2Nv", "inherits": "PolyTerra PLA @0.2 nozzle", + "from": "system", + "setting_id": "UQYgjH1uVxf3d2Nv", + "instantiation": "true", "compatible_printers": [ "Snapmaker A250 Dual (0.2 nozzle)", "Snapmaker A250 Dual BKit (0.2 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json index dd4f969f62..9cb7060139 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyTerra J1 PLA @0.2 nozzle", - "setting_id": "mxKHxGmBZzPLS82O", "inherits": "PolyTerra PLA @0.2 nozzle", + "from": "system", + "setting_id": "mxKHxGmBZzPLS82O", + "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.2 nozzle)" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json index 7b66438058..2583b2a2c3 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyTerra J1 PLA", - "setting_id": "4MZWZX7QPBzxdEGj", "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "4MZWZX7QPBzxdEGj", + "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.4 nozzle)", "Snapmaker J1 (0.6 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json index 07d45a7633..e70ee3d5a0 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "from": "system", - "instantiation": "true", "name": "PolyTerra PLA @0.2 nozzle", - "setting_id": "6W1ygT08NordBdIW", "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "6W1ygT08NordBdIW", + "instantiation": "true", "compatible_printers": [ "Snapmaker A250 (0.2 nozzle)", "Snapmaker A250 BKit (0.2 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json index 7c05254a2e..76b1d2020c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA @Base.json @@ -1,4 +1,9 @@ { + "type": "filament", + "name": "Polymaker HT-PLA @Base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", "filament_density": [ "1.28" ], @@ -18,11 +23,6 @@ "0" ], "description": "", - "inherits": "fdm_filament_pla", - "name": "Polymaker HT-PLA @Base", - "type": "filament", - "instantiation": "false", - "from": "system", "filament_vendor": [ "Polymaker" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json index 3a64237122..06019b562c 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker HT-PLA-GF @Base.json @@ -1,4 +1,9 @@ { + "type": "filament", + "name": "Polymaker HT-PLA-GF @Base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", "filament_density": [ "1.34" ], @@ -18,11 +23,6 @@ "0" ], "description": "", - "inherits": "fdm_filament_pla", - "name": "Polymaker HT-PLA-GF @Base", - "type": "filament", - "instantiation": "false", - "from": "system", "filament_vendor": [ "Polymaker" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json index 0965bd153b..3692eac7d5 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PETG @Base.json @@ -1,4 +1,9 @@ { + "type": "filament", + "name": "Polymaker PETG @Base", + "inherits": "fdm_filament_petg", + "from": "system", + "instantiation": "false", "filament_density": [ "1.3" ], @@ -18,11 +23,6 @@ "0" ], "description": "", - "inherits": "fdm_filament_petg", - "name": "Polymaker PETG @Base", - "type": "filament", - "instantiation": "false", - "from": "system", "filament_vendor": [ "Polymaker" ] diff --git a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json index 072fa53c93..d69ccc79f2 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/Polymaker PLA Pro @Base.json @@ -1,4 +1,9 @@ { + "type": "filament", + "name": "Polymaker PLA Pro @Base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", "filament_density": [ "1.23" ], @@ -18,11 +23,6 @@ "0" ], "description": "", - "inherits": "fdm_filament_pla", - "name": "Polymaker PLA Pro @Base", - "type": "filament", - "instantiation": "false", - "from": "system", "filament_vendor": [ "Polymaker" ] diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json index 083432ebd5..fe6c59ba80 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ABS @U1.json @@ -7,5 +7,8 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_retract_length_toolchange": [ + "5" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json index 0c5d22723a..67bde29e8d 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker ASA @U1.json @@ -7,5 +7,8 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_retract_length_toolchange": [ + "5" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json new file mode 100644 index 0000000000..db331b0daa --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.2 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.2 nozzle", + "inherits": "Snapmaker Breakaway Support @base", + "from": "system", + "setting_id": "mJoaud6wulT4p8SA", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "filament_type": [ + "PLA" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json new file mode 100644 index 0000000000..248c57f6d0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.6 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.6 nozzle", + "inherits": "Snapmaker Breakaway Support @base", + "from": "system", + "setting_id": "rKUUREJNhstIU0I2", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_type": [ + "PLA" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.02" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json new file mode 100644 index 0000000000..47cf80d076 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1 0.8 nozzle.json @@ -0,0 +1,98 @@ +{ + "type": "filament", + "name": "Snapmaker Breakaway Support For PLA @U1 0.8 nozzle", + "inherits": "Snapmaker Breakaway Support @base", + "from": "system", + "setting_id": "hQ8jQ5GKQKGKuPew", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_type": [ + "PLA" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.3" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "3" + ], + "filament_retraction_speed": [ + "nil" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.015" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "textured_plate_temp": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json index 97b2f8b07f..9e5d63a63c 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker Breakaway Support For PLA @U1.json @@ -10,5 +10,83 @@ ], "filament_type": [ "PLA" + ], + "enable_pressure_advance": [ + "1" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "pressure_advance": [ + "0.03" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json new file mode 100644 index 0000000000..f1c3aa30a1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json @@ -0,0 +1,108 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.2 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "Ujul2YTBwfldFiFd", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "\n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "3" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_z_hop_types": [ + "Slope Lift" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..66a535b7fb --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json @@ -0,0 +1,113 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.6 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "2FfQZdp5xunngnF0", + "instantiation": "true", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "2.5" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..04446a623e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 0.8 nozzle", + "inherits": "Snapmaker PETG HF @U1 base2", + "from": "system", + "setting_id": "ebANa67V4B2nwUaX", + "instantiation": "true", + "filament_ramming_travel_time": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json new file mode 100644 index 0000000000..0ad75759a1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 base2.json @@ -0,0 +1,279 @@ +{ + "type": "filament", + "name": "Snapmaker PETG HF @U1 base2", + "inherits": "fdm_filament_petg", + "from": "system", + "filament_id": "GFG96", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "filament_type": [ + "PETG" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "25" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "counter_coef_1": [ + "0" + ], + "counter_coef_2": [ + "0.008" + ], + "counter_coef_3": [ + "-0.041" + ], + "counter_limit_min": [ + "-0.035" + ], + "counter_limit_max": [ + "0.033" + ], + "circle_compensation_speed": [ + "200" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "diameter_limit": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "0" + ], + "filament_dev_ams_drying_ams_limitations": [ + "0" + ], + "filament_dev_ams_drying_temperature": [ + "40.0" + ], + "filament_dev_ams_drying_time": [ + "8.0" + ], + "filament_dev_drying_softening_temperature": [ + "40.0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45.0" + ], + "filament_dev_drying_cooling_temperature": [ + "35.0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "90.0" + ], + "filament_dev_chamber_drying_time": [ + "12.0" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_long_retractions_when_ec": [ + "nil" + ], + "filament_ramming_volumetric_speed": [ + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_printable": [ + "3" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_ec": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_vendor": [ + "Generic" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_shrink": [ + "100%" + ], + "filament_pre_cooling_temperature": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0" + ], + "filament_ramming_travel_time": [ + "0" + ], + "filament_ramming_travel_time_nc": [ + "0" + ], + "filament_retract_length_nc": [ + "14" + ], + "hole_coef_1": [ + "0" + ], + "hole_coef_2": [ + "-0.008" + ], + "hole_coef_3": [ + "0.23415" + ], + "hole_limit_min": [ + "0.088" + ], + "hole_limit_max": [ + "0.22" + ], + "impact_strength_z": [ + "10" + ], + "long_retractions_when_ec": [ + "0" + ], + "retraction_distances_when_ec": [ + "0" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "no_slow_down_for_cooling_on_outwalls": [ + "0" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "70" + ], + "filament_change_length": [ + "10" + ], + "filament_velocity_adaptation_factor": [ + "1" + ], + "compatible_printers": [], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_adaptive_volumetric_speed": [ + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json new file mode 100644 index 0000000000..ee6234f406 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.2 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.2 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "from": "system", + "setting_id": "UTpedqYJysaoe3OI", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "additional_cooling_fan_speed": [ + "20" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_loading_speed": [ + "28" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.23" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json new file mode 100644 index 0000000000..e0e60a0e14 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.4 nozzle.json @@ -0,0 +1,98 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.4 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "from": "system", + "setting_id": "k6UQJJASzFSfePqN", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "24.99" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.04" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_density": [ + "1.25" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json new file mode 100644 index 0000000000..14f59104f8 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.6 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "from": "system", + "setting_id": "FlcbnP3kWiJLMDMl", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json new file mode 100644 index 0000000000..e746141f06 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 0.8 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 0.8 nozzle", + "inherits": "Snapmaker PETG Translucent @U1 base", + "from": "system", + "setting_id": "aJk3TnFTU3uQGjd3", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "80" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_threshold": [ + "10%" + ], + "pressure_advance": [ + "0.02" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json new file mode 100644 index 0000000000..eb18fb4838 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG Translucent @U1 base.json @@ -0,0 +1,8 @@ +{ + "type": "filament", + "name": "Snapmaker PETG Translucent @U1 base", + "inherits": "fdm_filament_petg", + "from": "system", + "filament_id": "PETG_TRANSLUCENT_001", + "instantiation": "false" +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json new file mode 100644 index 0000000000..adf7624e1f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1 base.json @@ -0,0 +1,127 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Basic @U1 base", + "from": "system", + "filament_id": "1417031127011", + "instantiation": "false", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json new file mode 100644 index 0000000000..4b68672fa5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Basic @U1.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Basic @U1", + "inherits": "Snapmaker PLA Basic @U1 base", + "from": "system", + "setting_id": "ZtUJN4JpkR0MLpiY", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json new file mode 100644 index 0000000000..990e67a79e --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Full Spectrum @U1 0.4 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Full Spectrum @U1 0.4 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "from": "system", + "setting_id": "iybaFWrXKOsmXgMJ", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json new file mode 100644 index 0000000000..907781cd2c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 0.4 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Glow @U1 0.4 nozzle", + "inherits": "Snapmaker PLA Glow @U1 base", + "from": "system", + "setting_id": "ee1YNNr8CwKetuvY", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "20" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_minimal_purge_on_wipe_tower": [ + "30" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json new file mode 100644 index 0000000000..ad3c1f4bbb --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Glow @U1 base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Glow @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "SPGLOW001", + "instantiation": "false", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "nozzle_temperature": [ + "220" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json new file mode 100644 index 0000000000..2a8c1e40c3 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.2 nozzle.json @@ -0,0 +1,287 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.2 nozzle", + "inherits": "Snapmaker PLA Matte @U1 base2", + "from": "system", + "setting_id": "d3c48DeNk7VDeeHf", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "2" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.05" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_minimal_purge_on_wipe_tower": [ + "5" + ], + "filament_multitool_ramming_flow": [ + "4" + ], + "filament_multitool_ramming_volume": [ + "4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_z_hop_types": [ + "nil" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.025" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json new file mode 100644 index 0000000000..9de7615ae5 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.6 nozzle.json @@ -0,0 +1,287 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.6 nozzle", + "inherits": "Snapmaker PLA Matte @U1 base2", + "from": "system", + "setting_id": "l3E1WaljDn2uoTqW", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unloading_speed": [ + "100" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json new file mode 100644 index 0000000000..251b2a47b6 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 0.8 nozzle.json @@ -0,0 +1,287 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 0.8 nozzle", + "inherits": "Snapmaker PLA Matte @U1 base2", + "from": "system", + "setting_id": "NLPd4AA0seW3NXdy", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "215" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "additional_cooling_fan_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_unloading_speed": [ + "100" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json new file mode 100644 index 0000000000..6c0dcf26fd --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1 base2.json @@ -0,0 +1,127 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Matte @U1 base2", + "from": "system", + "filament_id": "141703112701", + "instantiation": "false", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.24" + ], + "filament_cost": [ + "20" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "temperature_vitrification": [ + "60" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json index fcb1d74c92..a71c43f9b0 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Matte @U1.json @@ -27,7 +27,7 @@ "0" ], "additional_cooling_fan_speed": [ - "70" + "80" ], "chamber_temperature": [ "0" @@ -47,9 +47,6 @@ "cool_plate_temp_initial_layer": [ "60" ], - "default_filament_colour": [ - "" - ], "dont_slow_down_outer_wall": [ "0" ], @@ -60,7 +57,7 @@ "1" ], "enable_pressure_advance": [ - "1" + "0" ], "eng_plate_temp": [ "60" @@ -102,7 +99,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "1.01" + "1" ], "filament_is_support": [ "0" @@ -117,7 +114,7 @@ "nil" ], "filament_max_volumetric_speed": [ - "20" + "22" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -140,6 +137,9 @@ "filament_retract_before_wipe": [ "nil" ], + "filament_retract_length_toolchange": [ + "5" + ], "filament_retract_lift_above": [ "nil" ], @@ -216,19 +216,19 @@ "0" ], "hot_plate_temp": [ - "55" + "65" ], "hot_plate_temp_initial_layer": [ - "55" + "65" ], "idle_temperature": [ "0" ], "nozzle_temperature": [ - "220" + "215" ], "nozzle_temperature_initial_layer": [ - "220" + "215" ], "nozzle_temperature_range_high": [ "240" @@ -276,9 +276,9 @@ "40" ], "textured_plate_temp": [ - "60" + "65" ], "textured_plate_temp_initial_layer": [ - "60" + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json index a530b9208e..9fba864f40 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Metal @U1 base.json @@ -46,8 +46,5 @@ ], "nozzle_temperature": [ "220" - ], - "default_filament_colour": [ - "" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json new file mode 100644 index 0000000000..5eb860506c --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.2 nozzle.json @@ -0,0 +1,285 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.2 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "from": "system", + "setting_id": "Q5xH6oGGlbXr14Pa", + "filament_id": "11813638720", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.02" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "3" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json new file mode 100644 index 0000000000..5df6ff5a3a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.6 nozzle.json @@ -0,0 +1,285 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.6 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "from": "system", + "setting_id": "2pieDQoz9PiDCnU1", + "filament_id": "11813638720", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "15" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json new file mode 100644 index 0000000000..0758372ea0 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 0.8 nozzle.json @@ -0,0 +1,285 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Silk @U1 0.8 nozzle", + "inherits": "Snapmaker PLA Basic @U1 base", + "from": "system", + "setting_id": "f3H0JFUnds0mkKCN", + "filament_id": "11813638720", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "15" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json index 12d65834ea..227fa034dc 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1 base.json @@ -55,8 +55,5 @@ ], "nozzle_temperature": [ "230" - ], - "default_filament_colour": [ - "" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json index 7fdf44e792..c68904ffd9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Silk @U1.json @@ -1,11 +1,285 @@ { "type": "filament", "name": "Snapmaker PLA Silk @U1", - "inherits": "Snapmaker PLA Silk @U1 base", + "inherits": "Snapmaker PLA Basic @U1 base", "from": "system", "setting_id": "9PkHSwtXFM0zPWth", + "filament_id": "11813638720", "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_unloading_speed": [ + "90" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.015" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json new file mode 100644 index 0000000000..7fcb20f31b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.2 nozzle.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.2 nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 base2", + "from": "system", + "setting_id": "jsAgNNiUC6DoO7rz", + "instantiation": "true", + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "1.01" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pressure_advance": [ + "0.2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json new file mode 100644 index 0000000000..18fca8b4fd --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.6 nozzle.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.6 nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 base2", + "from": "system", + "setting_id": "aKudBpQBj3MZZZav", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1.6" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json new file mode 100644 index 0000000000..2ebadbd2b2 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 0.8 nozzle.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 0.8 nozzle", + "inherits": "Snapmaker PLA SnapSpeed @U1 base2", + "from": "system", + "setting_id": "sWoInox4hzxzIHfe", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_multitool_ramming_flow": [ + "30" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1.6" + ], + "filament_retraction_speed": [ + "30" + ], + "nozzle_temperature": [ + "215" + ], + "pressure_advance": [ + "0.018" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "enable_pressure_advance": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json new file mode 100644 index 0000000000..84889e3d9b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1 base2.json @@ -0,0 +1,281 @@ +{ + "type": "filament", + "name": "Snapmaker PLA SnapSpeed @U1 base2", + "from": "system", + "filament_id": "141703112701", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers": [], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "45" + ], + "eng_plate_temp_initial_layer": [ + "45" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + " " + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + " " + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json index 96d86d2a81..2525f5b2a9 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA SnapSpeed @U1.json @@ -33,13 +33,13 @@ "0" ], "close_fan_the_first_x_layers": [ - "3" + "1" ], "compatible_printers_condition": "", "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ - "80" + "70" ], "cool_plate_temp": [ "60" @@ -47,20 +47,17 @@ "cool_plate_temp_initial_layer": [ "60" ], - "default_filament_colour": [ - "" - ], "dont_slow_down_outer_wall": [ "0" ], "during_print_exhaust_fan_speed": [ - "60" + "70" ], "enable_overhang_bridge_fan": [ "1" ], "enable_pressure_advance": [ - "1" + "0" ], "eng_plate_temp": [ "60" @@ -102,7 +99,7 @@ "; filament end gcode \n" ], "filament_flow_ratio": [ - "0.99" + "0.966" ], "filament_is_support": [ "0" @@ -117,7 +114,7 @@ "nil" ], "filament_max_volumetric_speed": [ - "18" + "20" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -126,7 +123,7 @@ "1" ], "filament_multitool_ramming_flow": [ - "40" + "30" ], "filament_multitool_ramming_volume": [ "5" @@ -140,6 +137,9 @@ "filament_retract_before_wipe": [ "nil" ], + "filament_retract_length_toolchange": [ + "5" + ], "filament_retract_lift_above": [ "nil" ], @@ -159,13 +159,13 @@ "nil" ], "filament_retraction_length": [ - "0.8" + "1.2" ], "filament_retraction_minimum_travel": [ "nil" ], "filament_retraction_speed": [ - "30" + "nil" ], "filament_shrink": [ "100%" @@ -207,19 +207,19 @@ "nil" ], "filament_z_hop": [ - "nil" + "0.4" ], "filament_z_hop_types": [ - "nil" + "Slope Lift" ], "full_fan_speed_layer": [ "0" ], "hot_plate_temp": [ - "55" + "65" ], "hot_plate_temp_initial_layer": [ - "55" + "65" ], "idle_temperature": [ "0" @@ -231,7 +231,7 @@ "220" ], "nozzle_temperature_range_high": [ - "230" + "240" ], "nozzle_temperature_range_low": [ "190" @@ -246,7 +246,7 @@ "0.4157" ], "pressure_advance": [ - "0.026" + "0.02" ], "reduce_fan_stop_start_freq": [ "1" @@ -267,7 +267,7 @@ "-1" ], "temperature_vitrification": [ - "60" + "45" ], "textured_cool_plate_temp": [ "40" @@ -276,9 +276,9 @@ "40" ], "textured_plate_temp": [ - "60" + "65" ], "textured_plate_temp_initial_layer": [ - "60" + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json new file mode 100644 index 0000000000..6271b7af42 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.2 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.2 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "from": "system", + "setting_id": "zIg9XLrieYNBduyn", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "1.02" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.15" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json new file mode 100644 index 0000000000..7d4270ef31 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.4 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.4 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "from": "system", + "setting_id": "RqtrcLcy124ICGEc", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.32" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "8" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "50" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json new file mode 100644 index 0000000000..af3f95c757 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.6 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.6 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "from": "system", + "setting_id": "OZHemzEcvzFMN8fL", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json new file mode 100644 index 0000000000..a10a4b2fb1 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 0.8 nozzle.json @@ -0,0 +1,284 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 0.8 nozzle", + "inherits": "Snapmaker PLA Translucent @U1 base", + "from": "system", + "setting_id": "IPehCg9fKawLorB5", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "adaptive_pressure_advance": [ + "0" + ], + "adaptive_pressure_advance_bridges": [ + "0" + ], + "adaptive_pressure_advance_model": [ + "0,0,0\n0,0,0" + ], + "adaptive_pressure_advance_overhangs": [ + "0" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_shrinkage_compensation_z": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_vendor": [ + "Snapmaker" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "idle_temperature": [ + "0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pellet_flow_coefficient": [ + "0.4157" + ], + "pressure_advance": [ + "0.02" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "45" + ], + "textured_cool_plate_temp": [ + "40" + ], + "textured_cool_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json new file mode 100644 index 0000000000..4f4842ae1d --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Translucent @U1 base.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Translucent @U1 base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "SPTR001", + "instantiation": "false", + "filament_end_gcode": [ + "" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_loading_speed_start": [ + "35" + ], + "filament_loading_speed": [ + "35" + ], + "filament_unloading_speed_start": [ + "35" + ], + "filament_unloading_speed": [ + "35" + ], + "filament_load_time": [ + "2" + ], + "filament_unload_time": [ + "2" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_cooling_initial_speed": [ + "35" + ], + "filament_cooling_final_speed": [ + "60" + ], + "nozzle_temperature": [ + "220" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json new file mode 100644 index 0000000000..4768ac2783 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.4 nozzle.json @@ -0,0 +1,108 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "XvizDDHbds3bVrzi", + "filament_id": "GFL9922", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_start_gcode": [ + "" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "0.6" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "4" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json new file mode 100644 index 0000000000..43d306ebae --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Kp77DCcitdmoyjqm", + "filament_id": "GFL9922", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_start_gcode": [ + "" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "0.4" + ], + "pressure_advance": [ + "0.014" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json new file mode 100644 index 0000000000..da788a35fb --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA Wood @U1 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "Snapmaker PLA Wood @U1 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "nBYnNiqwLo6nAsqi", + "filament_id": "GFL9922", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_start_gcode": [ + "" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "\n" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.965" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_multitool_ramming_flow": [ + "40" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "0.4" + ], + "pressure_advance": [ + "0.007" + ], + "slow_down_layer_time": [ + "4" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "nozzle_temperature": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json new file mode 100644 index 0000000000..b986a7244a --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json @@ -0,0 +1,132 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "2INwruC3ZVkBTdUT", + "filament_id": "GFL98111", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "1" + ], + "filament_end_gcode": [ + "" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": [ + "50" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "5" + ], + "filament_retraction_length": [ + "1" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pressure_advance": [ + "0.01" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..dcb6392634 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.6 nozzle.json @@ -0,0 +1,138 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "CKfdL85SvbOLzMuP", + "filament_id": "GFL98111", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "2" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.015" + ], + "filament_cost": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_wipe_distance": [ + "2" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..1e6e961497 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.8 nozzle.json @@ -0,0 +1,135 @@ +{ + "type": "filament", + "name": "Snapmaker PLA-CF @U1 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "fhhnfJm4dN9FXpWQ", + "filament_id": "GFL98111", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_end_gcode": [ + "" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "25" + ], + "filament_start_gcode": [ + "" + ], + "filament_vendor": [ + "Snapmaker" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "3" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.015" + ], + "filament_cost": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "slow_down_layer_time": [ + "8" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "overhang_fan_threshold": [ + "50%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json index 617a8c23ea..63f877d965 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 base.json @@ -59,9 +59,6 @@ "temperature_vitrification": [ "150" ], - "default_filament_colour": [ - "" - ], "filament_type": [ "PLA-CF" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json index ec04c8108d..9091258467 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1.json @@ -7,5 +7,8 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "filament_retract_length_toolchange": [ + "5" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json new file mode 100644 index 0000000000..b28e0627ad --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.6 nozzle.json @@ -0,0 +1,113 @@ +{ + "type": "filament", + "name": "Snapmaker PVA @U1 0.6 nozzle", + "inherits": "Snapmaker PVA @U1 base", + "from": "system", + "setting_id": "lIqgnfeZdAm8G0TH", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "filament_cost": [ + "79.98" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "7" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "fan_min_speed": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json new file mode 100644 index 0000000000..6572a60078 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1 0.8 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Snapmaker PVA @U1 0.8 nozzle", + "inherits": "Snapmaker PVA @U1 base", + "from": "system", + "setting_id": "WxtuvwWxy73Gi0IK", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "enable_pressure_advance": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "79.98" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_retract_length_toolchange": [ + "10" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_soluble": [ + "1" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_low": [ + "205" + ], + "pressure_advance": [ + "0.03" + ], + "slow_down_layer_time": [ + "7" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_multitool_ramming_volume": [ + "5" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json index f9a33d7bcb..5ed5d243ac 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PVA @U1.json @@ -7,5 +7,95 @@ "instantiation": "true", "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" + ], + "enable_pressure_advance": [ + "1" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "pressure_advance": [ + "0.03" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_minimal_purge_on_wipe_tower": [ + "20" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "filament_retract_length_toolchange": [ + "4" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" ] } diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json new file mode 100644 index 0000000000..6ae8a5b675 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.6 nozzle.json @@ -0,0 +1,150 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.6 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "uQCplebxmpBpzsnk", + "filament_id": "GFU99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.2" + ], + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "pressure_advance": [ + "0.02" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_deretraction_speed": [ + "20" + ], + "filament_flow_ratio": [ + "1.093" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_retract_length_toolchange": [ + "4" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "20" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "14" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "0" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json new file mode 100644 index 0000000000..45f0f7a0e9 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1 0.8 nozzle.json @@ -0,0 +1,144 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1 0.8 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "w4Hpl2qNPmgNvaeM", + "filament_id": "GFU99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.5" + ], + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "pressure_advance": [ + "0.02" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_deretraction_speed": [ + "20" + ], + "filament_flow_ratio": [ + "1.095" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_retract_length_toolchange": [ + "4" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "20" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "14" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json new file mode 100644 index 0000000000..e89397849b --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 90A @U1.json @@ -0,0 +1,141 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 90A @U1", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "T4MmgICRrSzvmCZ5", + "filament_id": "GFU99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.2" + ], + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "pressure_advance": [ + "0.4" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "100" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "enable_pressure_advance": [ + "0" + ], + "filament_deretraction_speed": [ + "15" + ], + "filament_flow_ratio": [ + "1.045" + ], + "filament_multitool_ramming_flow": [ + "5" + ], + "filament_retract_length_toolchange": [ + "2" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "15" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "14" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json index a6d8c41b5d..3c51439206 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A @U1 base.json @@ -43,9 +43,6 @@ "filament_retraction_speed": [ "nil" ], - "filament_settings_id": [ - "" - ], "filament_soluble": [ "0" ], diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json new file mode 100644 index 0000000000..1085c84e6f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.6 nozzle.json @@ -0,0 +1,147 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.6 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "Q2svXpkEqg0dCdq3", + "filament_id": "GFU99", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.067" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_retract_length_toolchange": [ + "8" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.14" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json new file mode 100644 index 0000000000..bef4c7712f --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1 0.8 nozzle.json @@ -0,0 +1,147 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1 0.8 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "RjsE08h3l37cAkAs", + "filament_id": "GFU99", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.045" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_multitool_ramming_flow": [ + "15" + ], + "filament_retract_length_toolchange": [ + "8" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.12" + ], + "slow_down_layer_time": [ + "12" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json new file mode 100644 index 0000000000..5e0696d906 --- /dev/null +++ b/resources/profiles/Snapmaker/filament/Snapmaker TPU 95A HF @U1.json @@ -0,0 +1,144 @@ +{ + "type": "filament", + "name": "Snapmaker TPU 95A HF @U1", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "KwcwmV2UmZUgCBoz", + "filament_id": "GFU99", + "instantiation": "true", + "compatible_printers": [ + "Snapmaker U1 (0.4 nozzle)" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_multitool_ramming": [ + "1" + ], + "filament_multitool_ramming_volume": [ + "0.1" + ], + "enable_pressure_advance": [ + "0" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_flow_ratio": [ + "1.067" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_retract_length_toolchange": [ + "6" + ], + "filament_retraction_length": [ + "1" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_vendor": [ + "Snapmaker" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pressure_advance": [ + "0.23" + ], + "slow_down_layer_time": [ + "10" + ], + "activate_air_filtration": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "filament_cost": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature_range_low": [ + "200" + ] +} diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json index 8a5cbc56d8..aebc032855 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json @@ -1,13 +1,54 @@ { "type": "machine", - "setting_id": "CwJeuh1rxZcjvkXh", "name": "Snapmaker U1 (0.2 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_U1", + "from": "system", + "setting_id": "CwJeuh1rxZcjvkXh", + "instantiation": "true", "printer_model": "Snapmaker U1", "printer_variant": "0.2", - "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", + "auxiliary_fan": "1", + "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0" + ], + "host_type": "octoprint", + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_tool_change_time": "5", "max_layer_height": [ "0.14", "0.14", @@ -26,5 +67,126 @@ "0.2", "0.2" ], - "nozzle_type": "hardened_steel" + "nozzle_type": "hardened_steel", + "printable_area": [ + "0.5x1", + "270.5x1", + "270.5x271", + "0.5x271" + ], + "printable_height": "270.05", + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "10", + "10", + "10", + "10" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "269", + "269", + "269", + "269" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "thumbnails": "48x48/PNG, 300x300/PNG", + "travel_slope": [ + "3", + "3", + "3", + "3" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_rod": "27.5", + "extruder_clearance_radius": "72.5", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", + "machine_pause_gcode": "M600", + "nozzle_volume": "143", + "support_multi_bed_types": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json index 1105a7ec1d..28ccfd0a29 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json @@ -1,14 +1,20 @@ { "type": "machine", - "setting_id": "UeTP4RqAd7xAMHVE", "name": "Snapmaker U1 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_U1", + "from": "system", + "setting_id": "UeTP4RqAd7xAMHVE", + "instantiation": "true", "printer_model": "Snapmaker U1", "printer_variant": "0.4", "auxiliary_fan": "1", "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], "extruder_colour": [ "#FCE94F", "#FCE94F", @@ -29,38 +35,6 @@ "0" ], "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", - "machine_max_acceleration_extruding": [ - "25000", - "25000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "25000", - "25000" - ], - "machine_max_acceleration_x": [ - "25000", - "25000" - ], - "machine_max_acceleration_y": [ - "25000", - "25000" - ], - "machine_max_acceleration_z": [ - "500", - "200" - ], - "machine_max_jerk_x": [ - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9" - ], "machine_max_jerk_z": [ "3", "0.4" @@ -69,22 +43,11 @@ "30", "25" ], - "machine_max_speed_x": [ - "1000", - "200" - ], - "machine_max_speed_y": [ - "1000", - "200" - ], "machine_max_speed_z": [ "20", "12" ], - "resonance_avoidance": "1", - "min_resonance_avoidance_speed": "40", - "max_resonance_avoidance_speed": "90", - "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20251222 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\nG28 X Y\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nG28 Z\n\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n; Original upstream: BED_MESH_CALIBRATE PROBE_COUNT=11,11\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X10 Y3 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X110 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", "machine_tool_change_time": "5", "max_layer_height": [ "0.32", @@ -104,7 +67,7 @@ "0.4", "0.4" ], - "nozzle_type": "stainless_steel", + "nozzle_type": "hardened_steel", "printable_area": [ "0.5x1", "270.5x1", @@ -112,7 +75,6 @@ "0.5x271" ], "printable_height": "270.05", - "printer_settings_id": "MyToolChanger 0.4 nozzle - Copy", "retract_before_wipe": [ "0%", "0%", @@ -168,10 +130,10 @@ "18" ], "retraction_length": [ - "0.8", - "0.8", - "0.8", - "0.8" + "1.5", + "1.5", + "1.5", + "1.5" ], "retraction_minimum_travel": [ "1", @@ -180,16 +142,10 @@ "1" ], "retraction_speed": [ - "40", - "40", - "40", - "40" - ], - "deretraction_speed": [ - "35", - "35", - "35", - "35" + "30", + "30", + "30", + "30" ], "thumbnails": "48x48/PNG, 300x300/PNG", "travel_slope": [ @@ -228,17 +184,12 @@ "machine_load_filament_time": "0", "machine_unload_filament_time": "0", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", - "z_hop_when_prime": [ - "0", - "0", - "0", - "0" - ], - "ramming_pressure_advance_value": "0.02", - "tool_change_temprature_wait": "0", - "printer_notes": "", + "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", "machine_pause_gcode": "M600", "default_bed_type": "Textured PEI Plate", - "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num+1}", - "nozzle_volume": "143" + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "nozzle_volume": "143", + "resonance_avoidance": "1", + "min_resonance_avoidance_speed": "40", + "max_resonance_avoidance_speed": "90" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json index f637b2a592..c9866329bd 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "O6AMxX1Ptbtv4zCK", "name": "Snapmaker U1 (0.4+0.6 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_U1", + "from": "system", + "setting_id": "O6AMxX1Ptbtv4zCK", + "instantiation": "true", "printer_model": "Snapmaker U1", "printer_variant": "0.4+0.6", "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle)", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json index 60e699d108..f4dff2f357 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json @@ -1,18 +1,59 @@ { "type": "machine", - "setting_id": "1OseO7RSPgE4CRKO", "name": "Snapmaker U1 (0.6 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_U1", + "from": "system", + "setting_id": "1OseO7RSPgE4CRKO", + "instantiation": "true", "printer_model": "Snapmaker U1", "printer_variant": "0.6", - "default_print_profile": "0.20 Standard @Snapmaker U1 (0.6 nozzle)", + "auxiliary_fan": "1", + "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0" + ], + "host_type": "octoprint", + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_tool_change_time": "5", "max_layer_height": [ - "0.48", - "0.48", - "0.48", - "0.48" + "0.42", + "0.42", + "0.42", + "0.42" ], "min_layer_height": [ "0.12", @@ -26,5 +67,126 @@ "0.6", "0.6" ], - "nozzle_type": "stainless_steel" + "nozzle_type": "stainless_steel", + "printable_area": [ + "0.5x1", + "270.5x1", + "270.5x271", + "0.5x271" + ], + "printable_height": "270.05", + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "10", + "10", + "10", + "10" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "269", + "269", + "269", + "269" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3", + "3", + "3" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "thumbnails": "48x48/PNG, 300x300/PNG", + "travel_slope": [ + "3", + "3", + "3", + "3" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "1", + "1", + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_rod": "27.5", + "extruder_clearance_radius": "72.5", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", + "machine_pause_gcode": "M600", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "nozzle_volume": "143", + "support_multi_bed_types": "0", + "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json index b775c2c964..e356f4264b 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json @@ -1,13 +1,54 @@ { "type": "machine", - "setting_id": "WTkhQtyDO06YY6AG", "name": "Snapmaker U1 (0.8 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_U1", + "from": "system", + "setting_id": "WTkhQtyDO06YY6AG", + "instantiation": "true", "printer_model": "Snapmaker U1", "printer_variant": "0.8", - "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", + "auxiliary_fan": "1", + "change_filament_gcode": ";===== date: 20260607 =====================\n; Change Tool[previous_extruder] -> Tool[next_extruder] (layer [layer_num])\n; max_layer_z [max_layer_z]\n; max_print_height [max_print_height]\n; print_sequence [print_sequence]\n\n{\nlocal move_z = 1.5;\nlocal max_speed_toolchange = 350.0;\nlocal wait_for_extruder_temp = true;\nposition[2] = position[2] + 2.0;\nlocal speed_toolchange = max_speed_toolchange;\n\nif travel_speed < max_speed_toolchange then\n speed_toolchange = travel_speed;\nendif\n\nif print_sequence == \"by object\" then\n\n if max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\n endif\n\nendif\n\n\"G91\nG1 Z\" + move_z + \" F600\nG90\n\";\n\"G1 F\" + (speed_toolchange * 60) + \"\n\";\nif wait_for_extruder_temp and not((layer_num < 0) and (next_extruder == initial_tool)) then\n \"\n\";\n \"; \" + layer_num + \"\n\";\n if layer_num == 0 then\n \"M109 S\" + first_layer_temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n else\n \"M109 S\" + temperature[next_extruder] + \" T\" + next_extruder + \"\n\";\n endif\nendif\n\"M400\" + \"\n\";\n\"T\" + next_extruder + \"\n\";\nif filament_type[next_extruder] == \"PVA\" then\n\"SET_VELOCITY_LIMIT ACCEL=3000\n\";\nelse\nendif\nif previous_extruder != next_extruder and initial_extruder != next_extruder then\n\"SM_PRINT_PREEXTRUDE_FILAMENT INDEX=\" + next_extruder + \"\n\";\nendif\n\"G90\n\";\n}\n", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "extruder_colour": [ + "#FCE94F", + "#FCE94F", + "#FCE94F", + "#FCE94F" + ], + "extruder_offset": [ + "0x0", + "0x0", + "0x0", + "0x0" + ], + "host_type": "octoprint", + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", + "machine_max_jerk_z": [ + "3", + "0.4" + ], + "machine_max_speed_e": [ + "30", + "25" + ], + "machine_max_speed_z": [ + "20", + "12" + ], + "machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20260128 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\nG28 X Y\nDEFECT_DETECT_NOODLE_FIRST\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nWAIT_CHAMBER_TEMP TIMEOUT=180\n{if curr_bed_type==\"High Temp Plate\"} \nG28 Z Z_OFFSET -0.07 \n{else} \nG28 Z \n{endif} \n\n\n;===== 热床调平 =================\n{if curr_bed_type==\"High Temp Plate\"} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 Z_OFFSET=-0.07\n{else} \n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n{endif} \n\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X85 Y1 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X185 E15 F360\nG1 Z1.5\n\nG90\nM106 S0", + "machine_tool_change_time": "5", "max_layer_height": [ "0.56", "0.56", @@ -26,5 +67,126 @@ "0.8", "0.8" ], - "nozzle_type": "hardened_steel" + "nozzle_type": "hardened_steel", + "printable_area": [ + "0.5x1", + "270.5x1", + "270.5x271", + "0.5x271" + ], + "printable_height": "270.05", + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "10", + "10", + "10", + "10" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "269", + "269", + "269", + "269" + ], + "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "thumbnails": "48x48/PNG, 300x300/PNG", + "travel_slope": [ + "3", + "3", + "3", + "3" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "enable_filament_ramming": "0", + "extruder_clearance_height_to_rod": "27.5", + "extruder_clearance_radius": "72.5", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", + "machine_pause_gcode": "M600", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", + "nozzle_volume": "143", + "support_multi_bed_types": "0", + "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json index 73fe5b74ef..7ee65878e6 100644 --- a/resources/profiles/Snapmaker/machine/fdm_U1.json +++ b/resources/profiles/Snapmaker/machine/fdm_U1.json @@ -176,8 +176,6 @@ "Normal Lift", "Normal Lift" ], - "bed_mesh_max": "267,267", - "bed_mesh_min": "3,3", "purge_in_prime_tower": "0", "machine_pause_gcode": "M601", "change_filament_gcode": "", @@ -186,12 +184,14 @@ "nozzle_type": "undefine", "auxiliary_fan": "0", "default_bed_type": "Textured PEI Plate", - "printer_agent": "snapmaker", "printable_area": [ "0.5x1", "270.5x1", "270.5x271", "0.5x271" ], - "printable_height": "270.05" + "printable_height": "270.05", + "bed_mesh_min": "3,3", + "bed_mesh_max": "267,267", + "printer_agent": "snapmaker" } diff --git a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json index 996b127b77..3dec06228e 100644 --- a/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,43 +1,31 @@ { - "type": "process", - "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.06", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.06", - "support_bottom_z_distance": "0.06", - "setting_id": "3SCofR6VrVyo3vJp", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", - "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "13.5", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.06_nozzle_0.2", + "from": "system", + "setting_id": "3SCofR6VrVyo3vJp", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": "4000", + "elefant_foot_compensation": "0.15", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "13.5", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json index 85e50ec87f..7c80e048f6 100644 --- a/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.06 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.06", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.06", - "support_bottom_z_distance": "0.06", - "setting_id": "997RaiNHd2YhpaRB", - "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "13.5", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.06_nozzle_0.2", + "from": "system", + "setting_id": "997RaiNHd2YhpaRB", + "instantiation": "true", + "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "13.5", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json index aeffe99f2a..b8a8e126aa 100644 --- a/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Extra Fine @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,19 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "18", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "outer_wall_speed": "100", + "precise_outer_wall": "1", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json index fe0fc0e87d..27d3903f06 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,43 +1,31 @@ { - "type": "process", - "name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.08", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.08", - "support_bottom_z_distance": "0.08", - "setting_id": "6ExpMU3Wq4J1R7wy", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": "4000", - "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", - "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.08_nozzle_0.2", + "from": "system", + "setting_id": "6ExpMU3Wq4J1R7wy", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": "4000", + "elefant_foot_compensation": "0.15", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "18", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json index b86156d841..677e6742d9 100644 --- a/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -21,6 +21,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "18", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "1", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json index 472176ff40..b4728bd60f 100644 --- a/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.08 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.08", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.08", - "support_bottom_z_distance": "0.08", - "setting_id": "loFrCYH9ux2L5JpZ", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "18", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.08_nozzle_0.2", + "from": "system", + "setting_id": "loFrCYH9ux2L5JpZ", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "18", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json index 0f15ce7c5f..80b2120807 100644 --- a/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 High Quality @Snapmaker U1 (0.2 nozzle).json @@ -1,43 +1,31 @@ { - "type": "process", - "name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.1", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.1", - "support_bottom_z_distance": "0.1", - "setting_id": "BfLpmnJnSBYBFInR", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", - "default_acceleration": "4000", - "elefant_foot_compensation": "0.15", - "outer_wall_acceleration": "2000", - "outer_wall_speed": "60", - "sparse_infill_pattern": "gyroid", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "28", - "prime_volume": "25", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.10_nozzle_0.2", + "from": "system", + "setting_id": "BfLpmnJnSBYBFInR", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", + "default_acceleration": "4000", + "elefant_foot_compensation": "0.15", + "outer_wall_acceleration": "2000", + "outer_wall_speed": "60", + "sparse_infill_pattern": "gyroid", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "28", + "prime_volume": "25", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json index 460bf8b6fd..80739205ac 100644 --- a/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.10 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,41 +1,29 @@ { - "type": "process", - "name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.1", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.1", - "support_bottom_z_distance": "0.1", - "setting_id": "SOq962UWv1ml1Mk0", - "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "preheat_time": "31", - "prime_tower_brim_width": "6", - "prime_tower_width": "28", - "prime_volume": "25", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "slowdown_for_curled_perimeters": "0" + "type": "process", + "name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.10_nozzle_0.2", + "from": "system", + "setting_id": "SOq962UWv1ml1Mk0", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "preheat_time": "31", + "prime_tower_brim_width": "6", + "prime_tower_width": "28", + "prime_volume": "25", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "slowdown_for_curled_perimeters": "0" } diff --git a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json index 42823b3f0b..2da54a6dc3 100644 --- a/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Fine @Snapmaker U1 (0.4 nozzle).json @@ -13,5 +13,18 @@ ], "ooze_prevention": "1", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "27", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "1", + "support_threshold_angle": "25", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json index 8564a41b24..9302a40421 100644 --- a/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -20,5 +20,20 @@ "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], - "slowdown_for_curled_perimeters": "0" + "prime_tower_width": "30", + "prime_volume": "27", + "slowdown_for_curled_perimeters": "0", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "standby_temperature_delta": "-150", + "support_threshold_angle": "25", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json index de68cc0dd0..cc93a97e99 100644 --- a/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.12 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.12", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.12", - "support_bottom_z_distance": "0.12", - "setting_id": "KHC1zpxpuvaUEzvf", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "28", - "prime_volume": "27", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.12_nozzle_0.2", + "from": "system", + "setting_id": "KHC1zpxpuvaUEzvf", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "28", + "prime_volume": "27", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json index c265d55e67..54513eb14b 100644 --- a/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.14 Standard @Snapmaker U1 (0.2 nozzle).json @@ -1,39 +1,27 @@ { - "type": "process", - "name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", - "inherits": "fdm_process_U1_0.2_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.14", - "initial_layer_print_height": "0.1", - "wall_loops": "4", - "bottom_shell_layers": "5", - "top_shell_layers": "7", - "bridge_flow": "1", - "initial_layer_speed": "40", - "initial_layer_infill_speed": "70", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "support_top_z_distance": "0.14", - "support_bottom_z_distance": "0.14", - "setting_id": "NGJoV0n6T510y9wM", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.2 nozzle)" - ], - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "32", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib" + "type": "process", + "name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)", + "inherits": "fdm_process_U1_0.14_nozzle_0.2", + "from": "system", + "setting_id": "NGJoV0n6T510y9wM", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.2 nozzle)" + ], + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "32", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib" } diff --git a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json index e66f9f3beb..416d85881c 100644 --- a/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 High Quality @Snapmaker U1 (0.4 nozzle).json @@ -21,6 +21,19 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "36", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "1", + "support_threshold_angle": "30", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json index 2817871fad..6871a3e120 100644 --- a/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.16 Optimal @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "36", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "1", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json index e68cf86d75..77b756bffc 100644 --- a/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.18 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,42 +1,32 @@ { - "type": "process", - "name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.25", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "support_top_z_distance": "0.18", - "support_bottom_z_distance": "0.18", - "setting_id": "XGSrVgnsUFv6uCRs", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "41", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)" + "type": "process", + "name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.18_nozzle_0.6", + "from": "system", + "setting_id": "XGSrVgnsUFv6uCRs", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "layer_height": "0.25", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "41", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json deleted file mode 100644 index 5de608c68d..0000000000 --- a/resources/profiles/Snapmaker/process/0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle).json +++ /dev/null @@ -1,23 +0,0 @@ -{ - "type": "process", - "name": "0.20 Bambu Support W @Snapmaker U1 (0.4 nozzle)", - "inherits": "fdm_process_U1_0.20", - "from": "system", - "setting_id": "8OkVMuElKExBdftG", - "instantiation": "true", - "enable_support": "1", - "support_interface_top_layers": "3", - "support_top_z_distance": "0.2", - "support_interface_loop_pattern": "1", - "support_interface_spacing": "0", - "support_interface_speed": "80", - "support_filament": "0", - "support_interface_filament": "0", - "enable_prime_tower": "1", - "compatible_printers": [ - "Snapmaker U1 (0.4 nozzle)" - ], - "ooze_prevention": "1", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" -} diff --git a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json index ac7fc102bc..da92006d49 100644 --- a/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Quality @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,7 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json index 243718507b..5d873d5efd 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,8 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "45", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json index 52e1aa9349..63bb6ea170 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json @@ -20,6 +20,7 @@ "smooth_coefficient": "150", "overhang_totally_speed": "50", "ooze_prevention": "1", + "prime_tower_width": "30", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json index f5ab699928..d1bb174a62 100644 --- a/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json @@ -13,6 +13,7 @@ "Snapmaker U1 (0.6 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json index 4defa45a16..91c5995b92 100644 --- a/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Strength @Snapmaker U1 (0.4 nozzle).json @@ -15,6 +15,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "45", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "1", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json index 36a3172b48..0cb85cc26d 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,8 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "40", + "prime_volume": "15", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json index 37ba596b63..3d1887bea9 100644 --- a/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.20 Support W @Snapmaker U1 (0.4 nozzle).json @@ -18,6 +18,8 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "50", + "prime_volume": "38", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150" } diff --git a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json index a4c10a8ad1..f98007b6e1 100644 --- a/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Draft @Snapmaker U1 (0.4 nozzle).json @@ -12,6 +12,18 @@ "Snapmaker U1 (0.4 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "54", "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150" + "standby_temperature_delta": "-150", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "precise_outer_wall": "1", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json index b8a8427baf..7a9f4e2154 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,41 +1,32 @@ { - "type": "process", - "name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.24", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "BziJYuA5U5gWm6FM", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "55", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.24_nozzle_0.6", + "from": "system", + "setting_id": "BziJYuA5U5gWm6FM", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "55", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json index 1b13e745d2..d9e1a2bf94 100644 --- a/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.24 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,43 +1,32 @@ { - "type": "process", - "name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.24", - "initial_layer_print_height": "0.4", - "bridge_flow": "1", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "QcJ5p9h0eYUb91ak", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "min_width_top_surface": "90", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "54", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)" + "type": "process", + "name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.24_nozzle_0.8", + "from": "system", + "setting_id": "QcJ5p9h0eYUb91ak", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "min_width_top_surface": "90", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "54", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json index 4adf06f100..4382b11e41 100644 --- a/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json @@ -11,5 +11,19 @@ "compatible_printers": [ "Snapmaker U1 (0.4 nozzle)" ], - "slowdown_for_curled_perimeters": "0" + "prime_tower_width": "30", + "prime_volume": "63", + "slowdown_for_curled_perimeters": "0", + "wipe_tower_filament": "0", + "prime_tower_brim_width": "5", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "gap_fill_target": "topbottom" } diff --git a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json index 8f8e6a1d15..52eb63a64d 100644 --- a/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json @@ -13,6 +13,8 @@ "Snapmaker U1 (0.6 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "68", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json index 3ed454a7d5..e2d5c192bb 100644 --- a/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,40 +1,31 @@ { - "type": "process", - "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.3", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "TWxp6qgz1DJa8Ngo", - "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "68", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.30_nozzle_0.6", + "from": "system", + "setting_id": "TWxp6qgz1DJa8Ngo", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "68", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json index ce6563d960..c216eb09d2 100644 --- a/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.30 Strength @Snapmaker U1 (0.6 nozzle).json @@ -1,42 +1,33 @@ { - "type": "process", - "name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.3", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "CBaL0vgwtgsd6Snj", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "elefant_foot_compensation": "0.15", - "sparse_infill_density": "25%", - "wall_loops": "4", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_width": "30", - "prime_volume": "68", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "prime_tower_brim_width": "5", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_type": "tree(auto)", - "wipe_tower_extra_spacing": "120%" + "type": "process", + "name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.30_nozzle_0.6", + "from": "system", + "setting_id": "CBaL0vgwtgsd6Snj", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", + "elefant_foot_compensation": "0.15", + "sparse_infill_density": "25%", + "wall_loops": "4", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_width": "30", + "prime_volume": "68", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "prime_tower_brim_width": "5", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_type": "tree(auto)", + "wipe_tower_extra_spacing": "120%" } diff --git a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json index 47ac276acc..d2c20559fd 100644 --- a/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.32 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,44 +1,34 @@ { - "type": "process", - "name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.32", - "initial_layer_print_height": "0.4", - "bridge_flow": "0.7", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "iVRz2B0VBIBL1xVd", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "72", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "bridge_density": "70%", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.32_nozzle_0.8", + "from": "system", + "setting_id": "iVRz2B0VBIBL1xVd", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "72", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "bridge_density": "70%", + "bridge_flow": "0.7", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json index ddd97a76c3..44ea3bb3f4 100644 --- a/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.36 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,41 +1,32 @@ { - "type": "process", - "name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.36", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "C0PiCFd3P222knX9", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "81", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.36_nozzle_0.6", + "from": "system", + "setting_id": "C0PiCFd3P222knX9", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "81", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json index 265c91eb35..37238fb0ea 100644 --- a/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json @@ -13,6 +13,8 @@ "Snapmaker U1 (0.6 nozzle)" ], "ooze_prevention": "1", + "prime_tower_width": "30", + "prime_volume": "90", "slowdown_for_curled_perimeters": "0", "standby_temperature_delta": "-150", "wipe_tower_filament": "0", diff --git a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json index 24edfabf6d..8d00eb9fab 100644 --- a/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.40 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,45 +1,35 @@ { - "type": "process", - "name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.4", - "initial_layer_print_height": "0.4", - "bridge_flow": "0.8", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "VqkPgUtZi159BKpJ", - "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "90", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "bridge_density": "60%", - "enable_arc_fitting": "0", - "min_width_top_surface": "200%", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "40", - "support_type": "tree(auto)" + "type": "process", + "name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.40_nozzle_0.8", + "from": "system", + "setting_id": "VqkPgUtZi159BKpJ", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "90", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "bridge_density": "60%", + "bridge_flow": "0.8", + "enable_arc_fitting": "0", + "min_width_top_surface": "200%", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "40", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json index d65ba8e688..d3e4bf7f07 100644 --- a/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.42 Standard @Snapmaker U1 (0.6 nozzle).json @@ -1,41 +1,32 @@ { - "type": "process", - "name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", - "inherits": "fdm_process_U1_0.6_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.42", - "initial_layer_print_height": "0.3", - "bridge_flow": "1", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "15", - "setting_id": "SVJzhQA3KQetRZmo", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.6 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "precise_z_height": "0", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "95", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)", + "inherits": "fdm_process_U1_0.42_nozzle_0.6", + "from": "system", + "setting_id": "SVJzhQA3KQetRZmo", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.6 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "95", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json index 08e054619e..d6cdf607dd 100644 --- a/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.48 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,43 +1,32 @@ { - "type": "process", - "name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.48", - "initial_layer_print_height": "0.4", - "bridge_flow": "1", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "5H6JWChFEo3zqoHQ", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "internal_bridge_speed": "100%", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "108", - "seam_gap": "15%", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.48_nozzle_0.8", + "from": "system", + "setting_id": "5H6JWChFEo3zqoHQ", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "internal_bridge_speed": "100%", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "108", + "seam_gap": "15%", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json index 86b571d1f5..9f67114c20 100644 --- a/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/process/0.56 Standard @Snapmaker U1 (0.8 nozzle).json @@ -1,41 +1,31 @@ { - "type": "process", - "name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", - "inherits": "fdm_process_U1_0.8_common", - "from": "system", - "instantiation": "true", - "layer_height": "0.56", - "initial_layer_print_height": "0.4", - "bridge_flow": "1", - "top_surface_pattern": "monotonic", - "initial_layer_speed": "35", - "initial_layer_infill_speed": "55", - "sparse_infill_speed": "100", - "top_surface_speed": "150", - "bridge_speed": "30", - "overhang_3_4_speed": "25", - "overhang_4_4_speed": "5", - "setting_id": "JZEIXOUT33c7MrZj", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", - "elefant_foot_compensation": "0.15", - "smooth_coefficient": "150", - "overhang_totally_speed": "50", - "compatible_printers": [ - "Snapmaker U1 (0.8 nozzle)" - ], - "filter_out_gap_fill": "1", - "gap_fill_target": "topbottom", - "prime_tower_brim_width": "5", - "prime_tower_width": "30", - "prime_volume": "126", - "wipe_tower_extra_rib_length": "8", - "wipe_tower_extra_spacing": "120%", - "wipe_tower_wall_type": "rib", - "enable_arc_fitting": "0", - "ooze_prevention": "1", - "precise_outer_wall": "0", - "slowdown_for_curled_perimeters": "0", - "standby_temperature_delta": "-150", - "support_threshold_angle": "35", - "support_type": "tree(auto)" + "type": "process", + "name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)", + "inherits": "fdm_process_U1_0.56_nozzle_0.8", + "from": "system", + "setting_id": "JZEIXOUT33c7MrZj", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", + "elefant_foot_compensation": "0.15", + "smooth_coefficient": "150", + "overhang_totally_speed": "50", + "compatible_printers": [ + "Snapmaker U1 (0.8 nozzle)" + ], + "filter_out_gap_fill": "1", + "gap_fill_target": "topbottom", + "layer_height": "0.56", + "prime_tower_brim_width": "5", + "prime_tower_width": "30", + "prime_volume": "126", + "wipe_tower_extra_rib_length": "8", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_wall_type": "rib", + "enable_arc_fitting": "0", + "ooze_prevention": "1", + "precise_outer_wall": "1", + "slowdown_for_curled_perimeters": "0", + "standby_temperature_delta": "-150", + "support_threshold_angle": "35", + "support_type": "tree(auto)" } diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1.json b/resources/profiles/Snapmaker/process/fdm_process_U1.json index 5d89a91866..72dab0c16b 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1.json @@ -33,7 +33,6 @@ "wall_loops": "2", "inner_wall_line_width": "0.45", "inner_wall_speed": "40", - "print_settings_id": "", "raft_layers": "0", "seam_position": "nearest", "skirt_distance": "2", diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json new file mode 100644 index 0000000000..240fd4f425 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.06_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.06_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.06", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.06", + "support_bottom_z_distance": "0.06" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json new file mode 100644 index 0000000000..41a824fa3a --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.08_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.08_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.08", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.08", + "support_bottom_z_distance": "0.08" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json new file mode 100644 index 0000000000..5ca58d7bd1 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.10_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.10_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.1", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.1", + "support_bottom_z_distance": "0.1" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json new file mode 100644 index 0000000000..8c70dd9dee --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.12_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.12_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.12", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.12", + "support_bottom_z_distance": "0.12" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json new file mode 100644 index 0000000000..1ac42c9ffa --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.14_nozzle_0.2.json @@ -0,0 +1,27 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.14_nozzle_0.2", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.14", + "initial_layer_print_height": "0.1", + "wall_loops": "4", + "bottom_shell_layers": "5", + "top_shell_layers": "7", + "bridge_flow": "1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "initial_layer_line_width": "0.25", + "sparse_infill_line_width": "0.22", + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "support_line_width": "0.22", + "top_surface_line_width": "0.22", + "initial_layer_speed": "40", + "initial_layer_infill_speed": "70", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "support_top_z_distance": "0.14", + "support_bottom_z_distance": "0.14" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json new file mode 100644 index 0000000000..f4725a73c7 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.18_nozzle_0.6.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.18_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.18", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15", + "support_top_z_distance": "0.18", + "support_bottom_z_distance": "0.18" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json new file mode 100644 index 0000000000..a014a375b3 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.24_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.24", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json new file mode 100644 index 0000000000..e958e9a2ee --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.24_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.24_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.24", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json new file mode 100644 index 0000000000..a44a9ca05a --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.30_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.30_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.3", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json new file mode 100644 index 0000000000..67d9ecdb62 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.32_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.32_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.32", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json new file mode 100644 index 0000000000..314965b603 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.36_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.36_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.36", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json new file mode 100644 index 0000000000..ec19b56fa5 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.40_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.40_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.4", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json new file mode 100644 index 0000000000..18c1e7d79b --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.42_nozzle_0.6.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.42_nozzle_0.6", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.42", + "initial_layer_print_height": "0.3", + "bridge_flow": "1", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "initial_layer_line_width": "0.62", + "sparse_infill_line_width": "0.62", + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "15" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json new file mode 100644 index 0000000000..8d5632b790 --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.48_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.48_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.48", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json new file mode 100644 index 0000000000..7a5c92932d --- /dev/null +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.56_nozzle_0.8.json @@ -0,0 +1,26 @@ +{ + "type": "process", + "name": "fdm_process_U1_0.56_nozzle_0.8", + "inherits": "fdm_process_U1_common", + "from": "system", + "instantiation": "false", + "layer_height": "0.56", + "initial_layer_print_height": "0.4", + "bridge_flow": "1", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "initial_layer_line_width": "0.82", + "sparse_infill_line_width": "0.82", + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "35", + "initial_layer_infill_speed": "55", + "sparse_infill_speed": "100", + "top_surface_speed": "150", + "bridge_speed": "30", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5" +} diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json index 93119a9370..40ea900ba2 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_0.6_common.json @@ -7,7 +7,7 @@ "line_width": "0.62", "outer_wall_line_width": "0.62", "inner_wall_line_width": "0.62", - "initial_layer_line_width": "0.72", + "initial_layer_line_width": "0.62", "sparse_infill_line_width": "0.62", "internal_solid_infill_line_width": "0.62", "support_line_width": "0.62", diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json index 0af8c229a7..462ddb53ae 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json @@ -13,8 +13,7 @@ "compatible_printers_condition": "", "draft_shield": "disabled", "elefant_foot_compensation": "0", - "enable_arc_fitting": "1", - "exclude_object": "1", + "enable_arc_fitting": "0", "outer_wall_acceleration": "5000", "wall_infill_order": "inner wall/outer wall/infill", "line_width": "0.42", @@ -46,7 +45,7 @@ "internal_solid_infill_speed": "150", "initial_layer_infill_speed": "60", "resolution": "0.012", - "support_type": "normal(auto)", + "support_type": "tree(auto)", "support_style": "default", "support_top_z_distance": "0.2", "support_bottom_z_distance": "0.2", @@ -68,11 +67,9 @@ "travel_speed": "500", "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", - "wipe_tower_cone_angle": "30", - "wipe_tower_wall_type": "rib", - "wipe_tower_extra_rib_length": "0", "prime_tower_width": "35", - "prime_volume": "30", "wall_generator": "arachne", - "compatible_printers": [] + "compatible_printers": [], + "wipe_tower_extra_rib_length": "8", + "exclude_object": "1" } diff --git a/resources/profiles/Snapmaker/process/fdm_process_a400.json b/resources/profiles/Snapmaker/process/fdm_process_a400.json index 39e7565f0b..f8ca481f9f 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_a400.json +++ b/resources/profiles/Snapmaker/process/fdm_process_a400.json @@ -5,7 +5,7 @@ "from": "system", "instantiation": "false", "initial_layer_print_height": "0.2", - "enable_arc_fitting": "1", + "enable_arc_fitting": "0", "initial_layer_infill_speed": "75", "outer_wall_speed": "100", "inner_wall_speed": "160", diff --git a/resources/profiles/Snapmaker/process/fdm_process_common.json b/resources/profiles/Snapmaker/process/fdm_process_common.json index 6fb4fa2de4..458a0f6162 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_common.json @@ -110,7 +110,7 @@ "top_surface_jerk": "2", "travel_jerk": "4", "enable_support": "0", - "support_type": "normal(auto)", + "support_type": "tree(auto)", "support_style": "snug", "support_threshold_angle": "30", "support_on_build_plate_only": "1", diff --git a/resources/profiles/Snapmaker/process/fdm_process_idex.json b/resources/profiles/Snapmaker/process/fdm_process_idex.json index 7e04710bd3..6aeabfdaa7 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_idex.json +++ b/resources/profiles/Snapmaker/process/fdm_process_idex.json @@ -5,7 +5,7 @@ "from": "system", "instantiation": "false", "initial_layer_print_height": "0.2", - "enable_arc_fitting": "1", + "enable_arc_fitting": "0", "initial_layer_infill_speed": "75", "outer_wall_speed": "120", "inner_wall_speed": "250", diff --git a/resources/profiles/Voron/machine/fdm_klipper_common.json b/resources/profiles/Voron/machine/fdm_klipper_common.json index 4d40f3d168..b4ffd1a4bb 100644 --- a/resources/profiles/Voron/machine/fdm_klipper_common.json +++ b/resources/profiles/Voron/machine/fdm_klipper_common.json @@ -116,7 +116,7 @@ "deretraction_speed": [ "30" ], - "z_hop_types": "Normal Lift", + "z_hop_types": "Slope Lift", "silent_mode": "0", "single_extruder_multi_material": "1", "change_filament_gcode": "", diff --git a/scripts/orca_extra_profile_check.py b/scripts/orca_extra_profile_check.py index cdfc8544a4..07ce3d69d3 100644 --- a/scripts/orca_extra_profile_check.py +++ b/scripts/orca_extra_profile_check.py @@ -46,12 +46,16 @@ def no_duplicates_object_pairs_hook(pairs): return seen # NOTE: currently Orca expects compatible_printers to be a defined in every instantiation profile, inheritation is not supported in Profile page -def check_filament_compatible_printers(vendor_folder): +def check_filament_compatible_printers(vendor, vendor_folder): """ Checks JSON files in the vendor folder for missing or empty 'compatible_printers' when 'instantiation' is flagged as true. + In the OrcaFilamentLibrary 'compatible_printers' is optional: a profile without it is generic and + offered on every printer, while a profile that lists printers supersedes the generic one there. + Parameters: + vendor (str): The vendor name the folder belongs to. vendor_folder (str or Path): The directory to search for JSON profile files. Returns: @@ -115,7 +119,7 @@ def check_filament_compatible_printers(vendor_folder): for profile in profiles.values(): instantiation = str(profile['content'].get("instantiation", "")).lower() == "true" - if instantiation: + if instantiation and vendor != 'OrcaFilamentLibrary': try: compatible_printers = get_property(profile, "compatible_printers") if not compatible_printers or (isinstance(compatible_printers, list) and not compatible_printers): @@ -571,7 +575,7 @@ def main(): vendor_path = profiles_dir / vendor_name if args.check_filaments or not (args.check_materials and not args.check_filaments): - errors_found += check_filament_compatible_printers(vendor_path / "filament") + errors_found += check_filament_compatible_printers(vendor_name, vendor_path / "filament") if args.check_materials: new_errors, new_warnings = check_machine_default_materials(profiles_dir, vendor_name) diff --git a/src/libslic3r/AABBTreeLines.hpp b/src/libslic3r/AABBTreeLines.hpp index 97ad1bdf44..52c4cdf545 100644 --- a/src/libslic3r/AABBTreeLines.hpp +++ b/src/libslic3r/AABBTreeLines.hpp @@ -31,8 +31,9 @@ namespace AABBTreeLines { inline VectorType closest_point_to_origin(size_t primitive_index, ScalarType& squared_distance) const { Vec nearest_point; + Vec cast_origin = origin.template cast(); const LineType& line = lines[primitive_index]; - squared_distance = line_alg::distance_to_squared(line, origin.template cast(), &nearest_point); + squared_distance = line_alg::distance_to_squared(line, cast_origin, &nearest_point); return nearest_point.template cast(); } }; diff --git a/src/libslic3r/Extruder.cpp b/src/libslic3r/Extruder.cpp index 1e250b707e..b1b6ca347a 100644 --- a/src/libslic3r/Extruder.cpp +++ b/src/libslic3r/Extruder.cpp @@ -220,12 +220,12 @@ double Extruder::retract_restart_extra() const double Extruder::retract_length_toolchange() const { - return m_config->retract_length_toolchange.get_at(extruder_id()); + return m_config->retract_length_toolchange.get_at(m_config_index); } double Extruder::retract_restart_extra_toolchange() const { - return m_config->retract_restart_extra_toolchange.get_at(extruder_id()); + return m_config->retract_restart_extra_toolchange.get_at(m_config_index); } double Extruder::travel_slope() const diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index f5db2e8349..babe018651 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -1137,8 +1137,8 @@ static std::vector get_path_of_change_filament(const Print& print) float old_retract_length = (old_filament_id != -1) ? full_config.retraction_length.get_at(old_fi) : 0; float new_retract_length = full_config.retraction_length.get_at(new_fi); - float old_retract_length_toolchange = (old_filament_id != -1) ? full_config.retract_length_toolchange.get_at(old_filament_id) : 0; - float new_retract_length_toolchange = full_config.retract_length_toolchange.get_at(new_filament_id); + float old_retract_length_toolchange = (old_filament_id != -1) ? full_config.retract_length_toolchange.get_at(old_fi) : 0; + float new_retract_length_toolchange = full_config.retract_length_toolchange.get_at(new_fi); int old_filament_temp = (old_filament_id != -1) ? (gcodegen.on_first_layer()? full_config.nozzle_temperature_initial_layer.get_at(old_fi) : full_config.nozzle_temperature.get_at(old_fi)) : 210; int new_filament_temp = gcodegen.on_first_layer() ? full_config.nozzle_temperature_initial_layer.get_at(new_fi) : full_config.nozzle_temperature.get_at(new_fi); Vec3d nozzle_pos = gcode_writer.get_position(); @@ -2884,6 +2884,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato DoExport::init_gcode_processor(print.config(), m_processor, m_silent_time_estimator_enabled, print.get_layered_nozzle_group_result()); const bool is_bbl_printers = print.is_BBL_printer(); + const bool skip_config_block = print.config().gcode_skip_config_block; const WipeTowerType wipe_tower_type = print.wipe_tower_type(); m_calib_config.clear(); // resets analyzer's tracking data @@ -3059,7 +3060,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato // as configuration key / value pairs to be parsable by older versions of // PrusaSlicer G-code viewer. { - if (is_bbl_printers) { + if (is_bbl_printers && !skip_config_block) { file.write("; CONFIG_BLOCK_START\n"); std::string full_config; append_full_config(print, full_config); @@ -4086,23 +4087,25 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato GCodeProcessor::ETags::Estimated_Printing_Time_Placeholder) .c_str()); file.write("\n"); - file.write("; CONFIG_BLOCK_START\n"); - std::string full_config; - append_full_config(print, full_config); - if (!full_config.empty()) - file.write(full_config); + if (!skip_config_block) { + file.write("; CONFIG_BLOCK_START\n"); + std::string full_config; + append_full_config(print, full_config); + if (!full_config.empty()) + file.write(full_config); - // SoftFever: write compatiple info - int first_layer_bed_temperature = get_bed_temperature(0, true, print.config().curr_bed_type); - file.write_format("; first_layer_bed_temperature = %d\n", first_layer_bed_temperature); - file.write_format("; bed_shape = %s\n", print.full_print_config().opt_serialize("printable_area").c_str()); - file.write_format("; first_layer_temperature = %d\n", print.config().nozzle_temperature_initial_layer.get_at(0)); - file.write_format("; first_layer_height = %.3f\n", print.config().initial_layer_print_height.value); - - //SF TODO -// file.write_format("; variable_layer_height = %d\n", print.ad.adaptive_layer_height ? 1 : 0); - - file.write("; CONFIG_BLOCK_END\n\n"); + // SoftFever: write compatiple info + int first_layer_bed_temperature = get_bed_temperature(0, true, print.config().curr_bed_type); + file.write_format("; first_layer_bed_temperature = %d\n", first_layer_bed_temperature); + file.write_format("; bed_shape = %s\n", print.full_print_config().opt_serialize("printable_area").c_str()); + file.write_format("; first_layer_temperature = %d\n", print.config().nozzle_temperature_initial_layer.get_at(0)); + file.write_format("; first_layer_height = %.3f\n", print.config().initial_layer_print_height.value); + + //SF TODO +// file.write_format("; variable_layer_height = %d\n", print.ad.adaptive_layer_height ? 1 : 0); + + file.write("; CONFIG_BLOCK_END\n\n"); + } // !skip_config_block } file.write("\n"); @@ -9035,7 +9038,7 @@ std::string GCode::set_extruder(unsigned int new_filament_id, double print_z, bo // per-layer nozzle grouping; resolve the column instead of indexing by the filament id. size_t new_fi = get_filament_config_index((int)new_filament_id); float new_retract_length = m_config.retraction_length.get_at(new_fi); - float new_retract_length_toolchange = m_config.retract_length_toolchange.get_at(new_filament_id); + float new_retract_length_toolchange = m_config.retract_length_toolchange.get_at(new_fi); int new_filament_temp = this->on_first_layer() ? m_config.nozzle_temperature_initial_layer.get_at(new_fi) : m_config.nozzle_temperature.get_at(new_fi); // BBS: if print_z == 0 use first layer temperature if (abs(print_z) < EPSILON) @@ -9066,7 +9069,7 @@ std::string GCode::set_extruder(unsigned int new_filament_id, double print_z, bo // gap-filled carry-forward, so its current-layer column matches the nozzle it occupies. size_t old_fi = get_filament_config_index(old_filament_id); old_retract_length = m_config.retraction_length.get_at(old_fi); - old_retract_length_toolchange = m_config.retract_length_toolchange.get_at(old_filament_id); + old_retract_length_toolchange = m_config.retract_length_toolchange.get_at(old_fi); old_filament_temp = this->on_first_layer()? m_config.nozzle_temperature_initial_layer.get_at(old_fi) : m_config.nozzle_temperature.get_at(old_fi); //During the filament change, the extruder will extrude an extra length of grab_length for the corresponding detection, so the purge can reduce this length. diff --git a/src/libslic3r/GCodeWriter.cpp b/src/libslic3r/GCodeWriter.cpp index e3d1c30362..0e80cc1fb7 100644 --- a/src/libslic3r/GCodeWriter.cpp +++ b/src/libslic3r/GCodeWriter.cpp @@ -3,6 +3,7 @@ #include "I18N.hpp" #include "PrintConfig.hpp" #include "ClipperUtils.hpp" +#include "Geometry/ArcWelder.hpp" #include "Line.hpp" #include #include @@ -1018,45 +1019,48 @@ std::string GCodeWriter::_spiral_travel_to_z(double z, const Vec2d &ij_offset, c } if (!this->config.enable_arc_fitting) { // Orca: if arc fitting is disabled, approximate the arc with small linear segments - std::ostringstream oss; const double z_start = m_pos(2); // starting Z height - // -------------------------------------------------------------------- - // Determine number of segments based on Resolution - // -------------------------------------------------------------------- - const double ref_resolution = 0.01; // reference resolution in mm - const double ref_segments = 8.0; // reference number of segments at reference resolution - - // number of linear segments to use for approximating the arc, clamp between 4 and 16 - const int segments = std::clamp(int(std::round(ref_segments * (ref_resolution / m_resolution))), 4, 16); - // -------------------------------------------------------------------- - const double px = m_pos(0) - m_x_offset; // take plate offset into consideration const double py = m_pos(1) - m_y_offset; // take plate offset into consideration const double cx = px + ij_offset(0); // center x const double cy = py + ij_offset(1); // center y const double radius = ij_offset.norm(); // radius + + // Number of linear segments approximating the circle, chosen so that a chord never deviates + // from the true arc by more than the slicing resolution. A resolution of 0 means "no + // simplification", which has no finite segment count, so it takes the upper bound. + constexpr size_t min_segments = 8; // keep a small spiral visibly round + constexpr size_t max_segments = 128; // bound the emitted G-code + const int segments = int(m_resolution > 0. ? + std::clamp(Geometry::ArcWelder::arc_discretization_steps(radius, 2. * M_PI, m_resolution), min_segments, max_segments) : + max_segments); + const double a0 = std::atan2(py - cy, px - cx); // start angle - const double delta = 2.0 * M_PI; // CCW full circle - if (full_gcode_comment) - oss << ";" << comment << "\n"; + auto emit_point = [&output](const Vec3d &point) { + GCodeG1Formatter w; + w.emit_xyz(point); + output += w.string(); + }; - oss << "G1 F" << (speed * 60.0) << "\n"; // set feedrate + output.reserve(size_t(segments) * 40); // ~40 characters per emitted G1 line + + GCodeG1Formatter w; // set feedrate + w.emit_f(speed * 60.0); + w.emit_comment(GCodeWriter::full_gcode_comment, comment); + output += w.string(); // approximate the arc with small linear segments (without the last point which is added later to ensure exactness) for (int i = 1; i < segments; ++i) { - double t = double(i) / segments; // parametric position along arc - double a = a0 + delta * t; // CCW arc param - double x = cx + radius * std::cos(a); // point on circle - double y = cy + radius * std::sin(a); // point on circle - double zz = z_start + (z - z_start) * t; // interpolated Z height - - oss << "G1 X" << x << " Y" << y << " Z" << zz << "\n"; + const double t = double(i) / segments; // parametric position along arc + const double a = a0 + 2. * M_PI * t; // CCW arc param, full circle + emit_point(Vec3d(cx + radius * std::cos(a), // point on circle + cy + radius * std::sin(a), + z_start + (z - z_start) * t)); // interpolated Z height } - oss << "G1 X" << px << " Y" << py << " Z" << z << "\n"; // final point to ensure exactness - output = oss.str(); + emit_point(Vec3d(px, py, z)); // final point to ensure exactness } else { // Orca: if arc fitting is enabled emit a G2/G3 command for the spiral lift output = std::string("G17") + (full_gcode_comment ? " ; XY plane for arc\n" : "\n"); diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp index ad4d615807..2d6c993d78 100644 --- a/src/libslic3r/PerimeterGenerator.cpp +++ b/src/libslic3r/PerimeterGenerator.cpp @@ -1977,7 +1977,7 @@ void PerimeterGenerator::process_no_bridge(Surfaces& all_surfaces, coord_t perim ExPolygons unsupported = diff_ex(last, *this->lower_slices, ApplySafetyOffset::Yes); if (!unsupported.empty()) { //remove small overhangs - ExPolygons unsupported_filtered = offset2_ex(unsupported, double(-perimeter_spacing), double(perimeter_spacing)); + ExPolygons unsupported_filtered = opening_ex(unsupported, perimeter_spacing); if (!unsupported_filtered.empty()) { //to_draw.insert(to_draw.end(), last.begin(), last.end()); @@ -2090,35 +2090,40 @@ void PerimeterGenerator::process_no_bridge(Surfaces& all_surfaces, coord_t perim //TODO: add other polys as holes inside this one (-margin) } else { // if(this->config->counterbore_hole_bridging.value == chbBridges) // Orca: Partial counterbore bridging is mask-based. Preserve the supported - // remainder (`last`) and use simplified BridgeDetector coverage to derive the + // remainder and use simplified BridgeDetector coverage to derive the // bridgeable counterbore span. The span is grown from supported material, - // shrunk back, stripped from `last`, and expanded back. It is then prevented - // from intruding deeper into `last` than the explicit anchor overlap. - // Finally, add the allowed anchor band from `last` then remove the + // shrunk back, stripped from the remaining normal surface, and expanded back. + // It is then prevented from intruding deeper into it than the explicit anchor overlap. + // Finally, add the allowed anchor band from it then remove the // narrow hole-side wall contact, which must remain unbridgeable. - last = diff_ex(last, unsupported_filtered, ApplySafetyOffset::Yes); + const ExPolygons remaining = diff_ex(last, unsupported_filtered, ApplySafetyOffset::Yes); ExPolygons bridgeable_filtered; + for (ExPolygon& poly : bridgeable) { poly.simplify(perimeter_spacing, &bridgeable_filtered); } bridgeable_filtered = opening_ex(bridgeable_filtered, ext_perimeter_width); // Get rid of coarseness of the resulted bridgeable area by using the original supported area as reference. - // This is to avoid keeping tiny bridgeable areas that are far from the supported area, or protrude into it. - bridgeable_filtered = union_ex(offset_ex(last, perimeter_spacing), bridgeable_filtered); + // This is to avoid keeping tiny bridgeable areas that are far from the supported area, or protrude into it. + bridgeable_filtered = union_ex(offset_ex(remaining, perimeter_spacing), bridgeable_filtered); bridgeable_filtered = offset_ex(bridgeable_filtered, -perimeter_spacing); - bridgeable_filtered = diff_ex(bridgeable_filtered, last, ApplySafetyOffset::Yes); + bridgeable_filtered = diff_ex(bridgeable_filtered, remaining, ApplySafetyOffset::Yes); bridgeable_filtered = opening_ex(bridgeable_filtered, perimeter_spacing); // filter noise from the diff_ex bridgeable_filtered = offset_ex(bridgeable_filtered, perimeter_spacing); // restore the size to the original bridgeable area // Safety measure: Keep the bridge mask from intruding deeper into the - // supported anchor region (`last`) than the explicit anchor overlap. - bridgeable_filtered = diff_ex(bridgeable_filtered, offset_ex(last, -bridge_anchor_offset)); + // supported anchor region than the explicit anchor overlap. + bridgeable_filtered = diff_ex(bridgeable_filtered, offset_ex(remaining, -bridge_anchor_offset)); - ExPolygons bridge_anchor_areas = intersection_ex(last, offset_ex(unsupported_filtered, bridge_anchor_offset)); + ExPolygons bridge_anchor_areas = intersection_ex(remaining, offset_ex(unsupported_filtered, bridge_anchor_offset)); unsupported_filtered = union_ex(bridgeable_filtered, bridge_anchor_areas); // add bridge anchor unsupported_filtered = opening_ex(unsupported_filtered, bridge_anchor_offset); // remove anchor area from hole-side walls, it must remain unbridgeable + + // update 'last' only if we have a valid bridgeable area, otherwise we will lose the original unsupported area + if (!unsupported_filtered.empty()) + last = remaining; // TODO: Fix the case with thin outer walls around the bridge (1~2 walls) where classic wall // might generate two walls in a tiny space or non at all if "Detect thin walls" is not activated } diff --git a/src/libslic3r/PlaceholderParser.cpp b/src/libslic3r/PlaceholderParser.cpp index e3a4037590..3e29e0c172 100644 --- a/src/libslic3r/PlaceholderParser.cpp +++ b/src/libslic3r/PlaceholderParser.cpp @@ -1791,6 +1791,8 @@ namespace client // from UTF8 to UTF16 don't bail out. msg += boost::nowide::narrow(boost::nowide::widen(error_line)); msg += '\n'; + // The error dialog (MsgDialog.cpp) renders this excerpt monospaced. It recognizes a source + // line directly above a caret line of spaces and a single '^'. for (size_t i = 0; i < error_pos; ++ i) msg += ' '; msg += "^\n"; diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp index 2821bef0af..47d448b69b 100644 --- a/src/libslic3r/Preset.cpp +++ b/src/libslic3r/Preset.cpp @@ -1351,6 +1351,8 @@ static std::vector s_Preset_filament_options {/*"filament_colour", "filament_retraction_length", "filament_retraction_minimum_travel", "filament_retraction_speed", + "filament_retract_length_toolchange", + "filament_retract_restart_extra_toolchange", "filament_wipe", "filament_z_hop", "filament_z_hop_types", @@ -1404,7 +1406,7 @@ static std::vector s_Preset_machine_limits_options { static std::vector s_Preset_printer_options { "printer_technology", "printable_area", "extruder_printable_area", "support_parallel_printheads", "parallel_printheads_count", "parallel_printheads_bed_exclude_areas", "bed_exclude_area","bed_custom_texture", "bed_custom_model", "gcode_flavor", - "fan_kickstart", "part_cooling_fan_min_pwm", "fan_speedup_time", "fan_speedup_overhangs", + "gcode_skip_config_block", "fan_kickstart", "part_cooling_fan_min_pwm", "fan_speedup_time", "fan_speedup_overhangs", "single_extruder_multi_material", "manual_filament_change", "file_start_gcode", "machine_start_gcode", "machine_end_gcode", "before_layer_change_gcode", "printing_by_object_gcode", "layer_change_gcode", "time_lapse_gcode", "wrapping_detection_gcode", "change_filament_gcode", "change_extrusion_role_gcode", "printer_model", "printer_variant", "printer_extruder_id", "printer_extruder_variant", "extruder_variant_list", "default_nozzle_volume_type", "printable_height", "extruder_printable_height", "extruder_clearance_radius", "extruder_clearance_height_to_lid", "extruder_clearance_height_to_rod", @@ -3784,12 +3786,14 @@ void PresetCollection::update_library_profile_excluded_from() } // Check all presets that has the same alias as the filament presets with empty compatible_printers in Orca Filament Library. + // A printer specific profile supersedes the generic one, no matter whether it lives in a vendor bundle or in the + // library itself. for (const Preset& preset : m_presets) { - if (preset.vendor == nullptr || preset.vendor->name == PresetBundle::ORCA_FILAMENT_LIBRARY) + if (preset.vendor == nullptr) continue; const auto* compatible_printers = dynamic_cast(preset.config.option("compatible_printers")); - // All profiles in concrete vendor profile shouldn't have empty compatible_printers, but here we check it for safety. + // Profiles with empty compatible_printers are the generic ones, they never supersede anything. if (compatible_printers == nullptr || compatible_printers->values.empty()) continue; auto itr = excluded_froms.find(preset.alias); diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index cc991f91cc..849b0754dc 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -72,6 +72,8 @@ const std::vector filament_extruder_override_keys = { "filament_deretraction_speed", "filament_retract_restart_extra", //not in filament_options_with_variant, added on 20250816 "filament_retraction_minimum_travel", + "filament_retract_length_toolchange", + "filament_retract_restart_extra_toolchange", // BBS: floats "filament_wipe_distance", // bools @@ -4259,6 +4261,15 @@ void PrintConfigDef::init_fff_params() def->readonly = false; def->set_default_value(new ConfigOptionEnum(gcfMarlinLegacy)); + def = this->add("gcode_skip_config_block", coBool); + def->label = L("Skip G-code config block"); + def->tooltip = L("Do not write the CONFIG_BLOCK (slicer configuration key/value pairs) into the G-code file. " + "This can help with printers whose firmware crashes when parsing these comment lines " + "(e.g. Anycubic go-klipper). Note: the G-code file will no longer contain slicer settings, " + "so importing it back into OrcaSlicer will not restore the configuration."); + def->mode = comAdvanced; + def->set_default_value(new ConfigOptionBool(false)); + def = this->add("pellet_modded_printer", coBool); def->label = L("Pellet Modded Printer"); def->tooltip = L("Enable this option if your printer uses pellets instead of filaments."); @@ -4292,7 +4303,7 @@ void PrintConfigDef::init_fff_params() "slow down."); def->mode = comAdvanced; def->set_default_value(new ConfigOptionBool(0)); - + //BBS def = this->add("infill_combination", coBool); def->label = L("Infill combination"); @@ -5725,12 +5736,10 @@ void PrintConfigDef::init_fff_params() def->set_default_value(new ConfigOptionFloatsNullable{10}); def = this->add("retract_length_toolchange", coFloats); - def->label = L("Length"); - //def->full_label = L("Retraction Length (Toolchange)"); - def->full_label = "Retraction Length (Toolchange)"; - //def->tooltip = L("When retraction is triggered before changing tool, filament is pulled back " - // "by the specified amount (the length is measured on raw filament, before it enters " - // "the extruder)."); + def->label = L("Retraction Length (Toolchange)"); + def->tooltip = L("When retraction is triggered before changing tool, filament is pulled back " + "by the specified amount (the length is measured on raw filament, before it enters " + "the extruder)."); def->sidetext = L("mm"); // millimeters, CIS languages need translation def->mode = comAdvanced; def->set_default_value(new ConfigOptionFloats { 10. }); @@ -5984,7 +5993,7 @@ void PrintConfigDef::init_fff_params() def->set_default_value(new ConfigOptionFloats { 0. }); def = this->add("retract_restart_extra_toolchange", coFloats); - def->label = L("Extra length on restart"); + def->label = L("Extra length on restart (Toolchange)"); def->tooltip = L("When the retraction is compensated after changing tool, the extruder will push " "this additional amount of filament."); def->sidetext = L("mm"); // millimeters, CIS languages need translation @@ -8154,10 +8163,12 @@ void PrintConfigDef::init_extruder_option_keys() "long_retractions_when_cut", "retract_after_wipe", "retract_before_wipe", + "retract_length_toolchange", "retract_lift_above", "retract_lift_below", "retract_lift_enforce", "retract_restart_extra", + "retract_restart_extra_toolchange", "retract_when_changing_layer", "retraction_distances_when_cut", "retraction_length", @@ -9245,6 +9256,8 @@ std::set filament_options_with_variant = { "filament_retract_lift_below", "filament_retract_lift_enforce", "filament_retract_restart_extra", + "filament_retract_length_toolchange", + "filament_retract_restart_extra_toolchange", "filament_retraction_speed", "filament_deretraction_speed", "filament_retraction_minimum_travel", diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index 90aa1adb3d..c1875e0288 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -1547,7 +1547,7 @@ PRINT_CONFIG_CLASS_DEFINE( ((ConfigOptionBool, gcode_add_line_number)) ((ConfigOptionBool, bbl_bed_temperature_gcode)) ((ConfigOptionEnum, gcode_flavor)) - + ((ConfigOptionBool, gcode_skip_config_block)) ((ConfigOptionFloat, time_cost)) ((ConfigOptionString, layer_change_gcode)) ((ConfigOptionString, time_lapse_gcode)) diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index a24c095ad6..110b6697ae 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -4756,7 +4756,9 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) deselect_all(); } //BBS Select plate in this 3D canvas. - else if (evt.LeftUp() && !m_mouse.dragging && m_picking_enabled && !m_hover_plate_idxs.empty() && (m_canvas_type == CanvasView3D) && !is_layers_editing_enabled()) + // The left up may come from an ImGui window (e.g. a drag started on the gizmo floating window and released over the bed), + // in which case it must not be treated as a click on the plate, otherwise the gizmo would be closed (see deselect_all below). + else if (evt.LeftUp() && !m_mouse.ignore_left_up && !m_mouse.dragging && m_picking_enabled && !m_hover_plate_idxs.empty() && (m_canvas_type == CanvasView3D) && !is_layers_editing_enabled()) { int hover_idx = m_hover_plate_idxs.front(); wxGetApp().plater()->select_plate_by_hover_id(hover_idx); diff --git a/src/slic3r/GUI/GLCanvas3D.hpp b/src/slic3r/GUI/GLCanvas3D.hpp index 7bae744098..17497edf16 100644 --- a/src/slic3r/GUI/GLCanvas3D.hpp +++ b/src/slic3r/GUI/GLCanvas3D.hpp @@ -1119,6 +1119,10 @@ public: void set_mouse_as_dragging() { m_mouse.dragging = true; } bool is_mouse_dragging() const { return m_mouse.dragging; } + // True when the current left up event comes from an ImGui window and was not processed by it + // (e.g. a drag that started on a gizmo floating window and was released over the 3D scene). + // Such a release is the end of an ImGui interaction, not a click on the scene. + bool is_mouse_left_up_ignored() const { return m_mouse.ignore_left_up; } double get_size_proportional_to_max_bed_size(double factor) const; diff --git a/src/slic3r/GUI/GUI.cpp b/src/slic3r/GUI/GUI.cpp index 554ecd4a4e..29f8fc9749 100644 --- a/src/slic3r/GUI/GUI.cpp +++ b/src/slic3r/GUI/GUI.cpp @@ -256,18 +256,18 @@ void change_opt_value(DynamicPrintConfig& config, const t_config_option_key& opt } } -void show_error(wxWindow* parent, const wxString& message, bool monospaced_font) +void show_error(wxWindow* parent, const wxString& message, bool has_code_excerpts) { wxGetApp().CallAfter([=] { - ErrorDialog msg(parent, message, monospaced_font); + ErrorDialog msg(parent, message, has_code_excerpts); msg.ShowModal(); }); } -void show_error(wxWindow* parent, const char* message, bool monospaced_font) +void show_error(wxWindow* parent, const char* message, bool has_code_excerpts) { assert(message); - show_error(parent, wxString::FromUTF8(message), monospaced_font); + show_error(parent, wxString::FromUTF8(message), has_code_excerpts); } void show_error_id(int id, const std::string& message) diff --git a/src/slic3r/GUI/GUI.hpp b/src/slic3r/GUI/GUI.hpp index 357fd20a97..db882b79cf 100644 --- a/src/slic3r/GUI/GUI.hpp +++ b/src/slic3r/GUI/GUI.hpp @@ -40,11 +40,11 @@ extern void add_menus(wxMenuBar *menu, int event_preferences_changed, int event_ // Change option value in config void change_opt_value(DynamicPrintConfig& config, const t_config_option_key& opt_key, const boost::any& value, int opt_index = 0); -// If monospaced_font is true, the error message is displayed using html 
 tags,
-// so that the code formatting will be preserved. This is useful for reporting errors from the placeholder parser.
-void show_error(wxWindow* parent, const wxString& message, bool monospaced_font = false);
-void show_error(wxWindow* parent, const char* message, bool monospaced_font = false);
-inline void show_error(wxWindow* parent, const std::string& message, bool monospaced_font = false) { show_error(parent, message.c_str(), monospaced_font); }
+// If has_code_excerpts is true, code excerpts (a source line and the caret line below it) render
+// monospaced so the caret aligns. Used for placeholder-parser errors.
+void show_error(wxWindow* parent, const wxString& message, bool has_code_excerpts = false);
+void show_error(wxWindow* parent, const char* message, bool has_code_excerpts = false);
+inline void show_error(wxWindow* parent, const std::string& message, bool has_code_excerpts = false) { show_error(parent, message.c_str(), has_code_excerpts); }
 void show_error_id(int id, const std::string& message);   // For Perl
 void show_info(wxWindow* parent, const wxString& message, const wxString& title = wxString());
 void show_info(wxWindow* parent, const char* message, const char* title = nullptr);
diff --git a/src/slic3r/GUI/GUI_Utils.hpp b/src/slic3r/GUI/GUI_Utils.hpp
index 890e8b9e1c..c93c40b066 100644
--- a/src/slic3r/GUI/GUI_Utils.hpp
+++ b/src/slic3r/GUI/GUI_Utils.hpp
@@ -113,14 +113,7 @@ public:
         update_dark_ui(this);
 #endif
 
-        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
-        // So, calculate the m_em_unit value from the font size, as before
-#if !defined(__WXGTK__)
-        m_em_unit = std::max(10, 10.0f * m_scale_factor);
-#else
-        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
-        m_em_unit = std::max(10, this->GetTextExtent("m").x - 1);
-#endif // __WXGTK__
+        update_em_unit();
 
 //        recalc_font();
 
@@ -235,6 +228,19 @@ private:
 //         m_em_unit = metrics.averageWidth;
 //    }
 
+    // update em_unit value for new window font
+    void update_em_unit()
+    {
+        // Linux specific issue : get_dpi_for_window(this) still doesn't responce to the Display's scale in new wxWidgets(3.1.3).
+        // So, calculate the m_em_unit value from the font size, as before
+#if !defined(__WXGTK__)
+        m_em_unit = std::max(10, 10.0f * m_scale_factor);
+#else
+        // initialize default width_unit according to the width of the one symbol ("m") of the currently active font of this window.
+        m_em_unit = std::max(10, this->GetTextExtent("m").x - 1);
+#endif // __WXGTK__
+    }
+
     // check if new scale is differ from previous
     bool    is_new_scale_factor() const { return fabs(m_scale_factor - m_prev_scale_factor) > 0.001; }
 
@@ -247,8 +253,7 @@ private:
         // set normal application font as a current window font
         m_normal_font = this->GetFont();
 
-        // update em_unit value for new window font
-        m_em_unit = std::max(10, 10.0f * m_scale_factor);
+        update_em_unit();
 
         // rescale missed controls sizes and images
         on_dpi_changed(suggested_rect);
diff --git a/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp b/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
index feba37133a..ecf465afe7 100644
--- a/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
+++ b/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
@@ -566,8 +566,11 @@ bool GLGizmoEmboss::on_mouse_for_translate(const wxMouseEvent &mouse_event)
 
 void GLGizmoEmboss::on_mouse_change_selection(const wxMouseEvent &mouse_event)
 {
-    static bool was_dragging = true;  
-    if ((mouse_event.LeftUp() || mouse_event.RightUp()) && !was_dragging) {
+    static bool was_dragging = true;
+    // The left up may be the end of a drag that started on the gizmo floating window (e.g. selecting
+    // text in the input field). Such a release is not a click on the scene and must not close the gizmo.
+    // (The flag is only set for left up events, so right up behavior is unchanged.)
+    if ((mouse_event.LeftUp() || mouse_event.RightUp()) && !was_dragging && !m_parent.is_mouse_left_up_ignored()) {
         // is hovered volume closest hovered?
         int hovered_idx = m_parent.get_first_hover_volume_idx();
         if (hovered_idx < 0) 
diff --git a/src/slic3r/GUI/MsgDialog.cpp b/src/slic3r/GUI/MsgDialog.cpp
index ebf4db6846..7f1effd162 100644
--- a/src/slic3r/GUI/MsgDialog.cpp
+++ b/src/slic3r/GUI/MsgDialog.cpp
@@ -9,8 +9,13 @@
 #include 
 #include 
 #include 
+#include 
+
+#include 
 
 #include 
+#include 
+#include 
 
 #include "libslic3r/libslic3r.h"
 #include "libslic3r/Utils.hpp"
@@ -229,12 +234,82 @@ void MsgDialog::finalize()
 }
 
 
+// A placeholder-parser caret line, pointing at the column where parsing failed.
+static bool is_caret_line(const std::string &line)
+{
+    return std::count(line.begin(), line.end(), '^') == 1 &&
+           std::all_of(line.begin(), line.end(), [](char c) { return c == ' ' || c == '^'; });
+}
+
+// Tag each line as a code excerpt (a caret line or the source line above one) that must stay
+// monospaced for the '^' to align.
+static std::vector> classify_code_lines(const std::string &msg)
+{
+    std::vector lines;
+    boost::split(lines, msg, boost::is_any_of("\n"));
+    for (std::string &line : lines)
+        if (!line.empty() && line.back() == '\r')
+            line.pop_back();
+
+    std::vector> tagged;
+    tagged.reserve(lines.size());
+    for (size_t i = 0; i < lines.size(); ++i) {
+        bool is_code = is_caret_line(lines[i]) || (i + 1 < lines.size() && is_caret_line(lines[i + 1]));
+        tagged.emplace_back(std::move(lines[i]), is_code);
+    }
+    return tagged;
+}
+
+// Keeps whitespace literal so the caret's leading spaces survive.
+// Used inside , which supplies the fixed face. 
 does both but adds a blank line above it.
+class CodeExcerptTagHandler : public wxHtmlWinTagHandler
+{
+public:
+    wxString GetSupportedTags() override { return wxT("EXCERPT"); }
+    bool     HandleTag(const wxHtmlTag &tag) override
+    {
+        const wxHtmlWinParser::WhitespaceMode ws = m_WParser->GetWhitespaceMode();
+        m_WParser->SetWhitespaceMode(wxHtmlWinParser::Whitespace_Pre);
+        ParseInner(tag);
+        m_WParser->SetWhitespaceMode(ws);
+        return true;
+    }
+};
+
+// Render the message as HTML, monospacing only the code excerpts.
+static std::string format_parser_error_html(const std::string &msg)
+{
+    std::string out;
+    for (const auto &[text, is_code] : classify_code_lines(msg)) {
+        if (!out.empty()) out += "
"; // join, not trail; a trailing 
 forces a scrollbar
+        std::string escaped = xml_escape(text);
+        if (is_code)
+            out += "" + escaped + "";
+        else
+            out += escaped;
+    }
+    return out;
+}
+
+// Measure each line in the font it will render in, so the dialog fits the longest line without slack.
+static wxSize measure_mixed_text(wxWindow *parent, const std::string &msg, const wxFont &prose_font, const wxFont &code_font)
+{
+    wxClientDC dc(parent);
+    int width = 0, height = 0;
+    for (const auto &[text, is_code] : classify_code_lines(msg)) {
+        dc.SetFont(is_code ? code_font : prose_font);
+        width   = std::max(width, dc.GetTextExtent(wxString::FromUTF8(text.c_str())).GetWidth());
+        height += dc.GetCharHeight();
+    }
+    return wxSize(width, height);
+}
+
 // Text shown as HTML, so that mouse selection and Ctrl-V to copy will work.
 static void add_msg_content(wxWindow   *parent,
                             wxBoxSizer *content_sizer,
                             wxString    msg,
-                            bool        monospaced_font = false,
-                            bool        is_marked_msg   = false,
+                            bool        has_code_excerpts = false,
+                            bool        is_marked_msg     = false,
                             const wxString &link_text = "",
                             std::function link_callback = nullptr)
 {
@@ -243,7 +318,7 @@ static void add_msg_content(wxWindow   *parent,
 
     // count lines in the message
     int msg_lines = 0;
-    if (!monospaced_font) {
+    if (!has_code_excerpts) {
         int line_len = 55;// count of symbols in one line
         int start_line = 0;
         for (auto i = msg.begin(); i != msg.end(); ++i) {
@@ -300,13 +375,23 @@ static void add_msg_content(wxWindow   *parent,
         page_size       = wxSize(info_width, page_height);
     }
     else {
-        wxClientDC dc(parent);
-        dc.SetFont(font); // ORCA without this it calculates bigger size
-        wxSize msg_sz = dc.GetMultiLineTextExtent(msg) + parent->FromDIP(wxSize(10,5)); // added extra spacing to prevent wrapping
+        wxSize msg_sz;
+        if (has_code_excerpts) {
+            msg_sz = measure_mixed_text(parent, msg.ToUTF8().data(), font, monospace);
+        } else {
+            wxClientDC dc(parent);
+            dc.SetFont(font); // ORCA without this it calculates bigger size
+            msg_sz = dc.GetMultiLineTextExtent(msg);
+        }
+        msg_sz += parent->FromDIP(wxSize(10,5)); // added extra spacing to prevent wrapping
 
-        page_size = wxSize(std::min(msg_sz.GetX(), info_width), std::min(msg_sz.GetY(), info_width));
+        int page_height = msg_sz.GetY();
+        // Reserve the horizontal scrollbar's height, or it clips the last line.
+        if (msg_sz.GetX() > info_width)
+            page_height += wxSystemSettings::GetMetric(wxSYS_HSCROLL_Y, parent);
+        page_size = wxSize(std::min(msg_sz.GetX(), info_width), std::min(page_height, info_width));
         // Extra line breaks in message dialog
-        if (link_text.IsEmpty() && !link_callback && is_marked_msg == false) {//for common text
+        if (link_text.IsEmpty() && !link_callback && is_marked_msg == false && !has_code_excerpts) {//for common text
             html->Destroy();
             if (msg_sz.GetX() < info_width) {//No need for line breaks
                 info_width = msg_sz.GetX();
@@ -337,12 +422,15 @@ static void add_msg_content(wxWindow   *parent,
     }
     html->SetMinSize(page_size);
 
-    std::string msg_escaped = xml_escape(msg.ToUTF8().data(), is_marked_msg);
-    boost::replace_all(msg_escaped, "\r\n", "
");
-    boost::replace_all(msg_escaped, "\n", "
");
-    if (monospaced_font)
-        // Code formatting will be preserved. This is useful for reporting errors from the placeholder parser.
-        msg_escaped = std::string("
") + msg_escaped + "
";
+    std::string msg_escaped;
+    if (has_code_excerpts) {
+        html->GetParser()->AddTagHandler(new CodeExcerptTagHandler());
+        msg_escaped = format_parser_error_html(msg.ToUTF8().data());
+    } else {
+        msg_escaped = xml_escape(msg.ToUTF8().data(), is_marked_msg);
+        boost::replace_all(msg_escaped, "\r\n", "
");
+        boost::replace_all(msg_escaped, "\n", "
");
+    }
 
     if (!link_text.IsEmpty() && link_callback) {
         msg_escaped += "" + std::string(link_text.ToUTF8().data()) + "";
@@ -360,15 +448,15 @@ static void add_msg_content(wxWindow   *parent,
 
 // ErrorDialog
 
-ErrorDialog::ErrorDialog(wxWindow *parent, const wxString &temp_msg, bool monospaced_font)
+ErrorDialog::ErrorDialog(wxWindow *parent, const wxString &temp_msg, bool has_code_excerpts)
     : MsgDialog(parent, wxString::Format(_(L("%s error")), SLIC3R_APP_FULL_NAME),
                         wxString::Format(_(L("%s has encountered an error")), SLIC3R_APP_FULL_NAME), wxOK)
     , msg(temp_msg)
 {
-    add_msg_content(this, content_sizer, msg, monospaced_font);
+    add_msg_content(this, content_sizer, msg, has_code_excerpts);
 
-	// Use a small bitmap with monospaced font, as the error text will not be wrapped.
-	logo->SetBitmap(create_scaled_bitmap("OrcaSlicer_192px_grayscale.png", this, monospaced_font ? 48 : /*1*/64));
+	// Use a small bitmap for code excerpts, which cannot wrap and so need the width.
+	logo->SetBitmap(create_scaled_bitmap("OrcaSlicer_192px_grayscale.png", this, has_code_excerpts ? 48 : /*1*/64));
 
     SetMaxSize(MSG_DLG_MAX_SIZE);
 
diff --git a/src/slic3r/GUI/MsgDialog.hpp b/src/slic3r/GUI/MsgDialog.hpp
index 174d734336..90fd160310 100644
--- a/src/slic3r/GUI/MsgDialog.hpp
+++ b/src/slic3r/GUI/MsgDialog.hpp
@@ -106,9 +106,9 @@ protected:
 class ErrorDialog : public MsgDialog
 {
 public:
-	// If monospaced_font is true, the error message is displayed using html 
 tags,
-	// so that the code formatting will be preserved. This is useful for reporting errors from the placeholder parser.
-	ErrorDialog(wxWindow *parent, const wxString &temp_msg, bool courier_font);
+	// If has_code_excerpts is true, code excerpts (a source line and the caret line below it) render
+	// monospaced so the caret aligns. Used for placeholder-parser errors.
+	ErrorDialog(wxWindow *parent, const wxString &temp_msg, bool has_code_excerpts);
 	ErrorDialog(ErrorDialog &&) = delete;
 	ErrorDialog(const ErrorDialog &) = delete;
 	ErrorDialog &operator=(ErrorDialog &&) = delete;
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index bade7fee98..f5cb3d045b 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -3078,7 +3078,7 @@ void TabPrint::build()
         optgroup->append_single_option_line("combine_brims", "others_settings_brim#combine-brims");
         optgroup->append_single_option_line("brim_ears_max_angle", "others_settings_brim#ear-max-angle");
         optgroup->append_single_option_line("brim_ears_detection_length", "others_settings_brim#ear-detection-radius");
-        optgroup->append_single_option_line("brim_ears_outer_only");
+        optgroup->append_single_option_line("brim_ears_outer_only", "others_settings_brim#brim-ears-outer-only");
 
         optgroup = page->new_optgroup(L("Special mode"), L"param_special");
         optgroup->append_single_option_line("slicing_mode", "others_settings_special_mode#slicing-mode");
@@ -4007,13 +4007,12 @@ void TabFilament::add_filament_overrides_page()
 
     const int extruder_idx = 0; // #ys_FIXME
 
-    ConfigOptionsGroupShp retraction_optgroup = page->new_optgroup(L("Retraction"), L"param_retraction");
-    auto append_retraction_option = [this, retraction_optgroup](const std::string& opt_key, int opt_index)
+    auto append_retraction_option = [this](ConfigOptionsGroupShp optgroup, const std::string& opt_key, int opt_index)
     {
         Line line {"",""};
-        line = retraction_optgroup->create_single_option_line(retraction_optgroup->get_option(opt_key, opt_index));
+        line = optgroup->create_single_option_line(optgroup->get_option(opt_key, opt_index));
 
-        line.near_label_widget = [this, optgroup_wk = ConfigOptionsGroupWkp(retraction_optgroup), opt_key, opt_index](wxWindow* parent) {
+        line.near_label_widget = [this, optgroup_wk = ConfigOptionsGroupWkp(optgroup), opt_key, opt_index](wxWindow* parent) {
             auto check_box = new ::CheckBox(parent); // ORCA modernize checkboxes
             check_box->Bind(wxEVT_TOGGLEBUTTON, [this, optgroup_wk, opt_key, opt_index](wxCommandEvent& evt) {
                 const bool is_checked = evt.IsChecked();
@@ -4040,9 +4039,10 @@ void TabFilament::add_filament_overrides_page()
             return check_box;
         };
 
-        retraction_optgroup->append_line(line);
+        optgroup->append_line(line);
     };
 
+    ConfigOptionsGroupShp retraction_optgroup = page->new_optgroup(L("Retraction"), L"param_retraction");
     for (const std::string opt_key : {  "filament_retraction_length",
                                         "filament_z_hop",
                                         "filament_z_hop_types",
@@ -4066,7 +4066,13 @@ void TabFilament::add_filament_overrides_page()
                                         //SoftFever
                                         // "filament_seam_gap"
                                      })
-        append_retraction_option(opt_key, extruder_idx);
+        append_retraction_option(retraction_optgroup, opt_key, extruder_idx);
+
+    ConfigOptionsGroupShp toolchange_optgroup = page->new_optgroup(L("Retraction when switching material"), L"param_retraction_material_change");
+    for (const std::string opt_key : {  "filament_retract_length_toolchange",
+                                        "filament_retract_restart_extra_toolchange"
+                                     })
+        append_retraction_option(toolchange_optgroup, opt_key, extruder_idx);
 
     ConfigOptionsGroupShp ironing_optgroup = page->new_optgroup(L("Ironing"), L"param_ironing");
     auto append_ironing_option = [this, ironing_optgroup](const std::string& opt_key, int opt_index)
@@ -4181,6 +4187,8 @@ void TabFilament::update_filament_overrides_page(const DynamicPrintConfig* print
                                             "filament_retraction_speed",
                                             "filament_deretraction_speed",
                                             "filament_retract_restart_extra",
+                                            "filament_retract_length_toolchange",
+                                            "filament_retract_restart_extra_toolchange",
                                             "filament_retraction_minimum_travel",
                                             "filament_retract_when_changing_layer",
                                             "filament_wipe",
@@ -4211,7 +4219,8 @@ void TabFilament::update_filament_overrides_page(const DynamicPrintConfig* print
         is_checked &= !dynamic_cast(m_config->option(opt_key))->is_nil(extruder_idx);
         m_overrides_options[opt_key]->SetValue(is_checked);
 
-        Field* field = optgroup->get_fieldc(opt_key, 0);
+        // the toolchange overrides live in their own optgroup, so search the whole page
+        Field* field = page->get_field(opt_key, 0);
         if (field == nullptr) continue;
 
         if (opt_key == "filament_long_retractions_when_cut") {
@@ -5017,6 +5026,7 @@ void TabPrinter::build_fff()
 
         optgroup->append_single_option_line("printer_structure", "printer_basic_information_advanced#printer-structure");
         optgroup->append_single_option_line("gcode_flavor", "printer_basic_information_advanced#g-code-flavor");
+        optgroup->append_single_option_line("gcode_skip_config_block", "printer_basic_information_advanced#skip-g-code-config-block");
         optgroup->append_single_option_line("pellet_modded_printer", "printer_basic_information_advanced#pellet-modded-printer");
         optgroup->append_single_option_line("bbl_use_printhost", "printer_basic_information_advanced#use-3rd-party-print-host");
 
diff --git a/tests/fff_print/test_print.cpp b/tests/fff_print/test_print.cpp
index 9cb085f78b..6bff945fc3 100644
--- a/tests/fff_print/test_print.cpp
+++ b/tests/fff_print/test_print.cpp
@@ -338,6 +338,22 @@ TEST_CASE("G-code lists the resolved extrusion-width settings", "[Print]")
     CHECK(with_first_layer.find("; first layer extrusion width") != std::string::npos);
 }
 
+// gcode_skip_config_block suppresses the resolved-settings block while leaving the
+// header and executable blocks intact.
+TEST_CASE("gcode_skip_config_block omits the resolved-settings comment block", "[Print]")
+{
+    const std::string gcode = slice({ cube(20) }, {
+        { "gcode_skip_config_block", true },
+        { "gcode_comments",         true },
+    });
+    CHECK(gcode.find("; CONFIG_BLOCK_START")     == std::string::npos);
+    CHECK(gcode.find("; CONFIG_BLOCK_END")       == std::string::npos);
+    CHECK(gcode.find("; layer_height =")         == std::string::npos);
+    CHECK(gcode.find("; fill_density =")         == std::string::npos);
+    CHECK(gcode.find("; HEADER_BLOCK_START")     != std::string::npos);
+    CHECK(gcode.find("; EXECUTABLE_BLOCK_START") != std::string::npos);
+}
+
 // Custom G-code templates substitute placeholders during export.
 TEST_CASE("Custom G-code placeholders are substituted", "[Print]")
 {
diff --git a/tests/libslic3r/CMakeLists.txt b/tests/libslic3r/CMakeLists.txt
index dbc6c99f15..1ad299473c 100644
--- a/tests/libslic3r/CMakeLists.txt
+++ b/tests/libslic3r/CMakeLists.txt
@@ -29,6 +29,7 @@ add_executable(${_TEST_NAME}_tests
     test_stl.cpp
     test_meshboolean.cpp
     test_marchingsquares.cpp
+    test_model.cpp
     test_utils.cpp
     test_timeutils.cpp
     test_voronoi.cpp
diff --git a/tests/libslic3r/test_3mf.cpp b/tests/libslic3r/test_3mf.cpp
index 1a082cd8e0..a6fe3ed460 100644
--- a/tests/libslic3r/test_3mf.cpp
+++ b/tests/libslic3r/test_3mf.cpp
@@ -509,64 +509,3 @@ SCENARIO("Nozzle-group metadata .3mf round-trip", "[3mf][MultiNozzle]") {
         boost::filesystem::remove_all(backup_dir);
     }
 }
-
-SCENARIO("2D convex hull of sinking object", "[3mf][.]") {
-    GIVEN("model") {
-        // load a model
-        Model model;
-        std::string src_file = std::string(TEST_DATA_DIR) + "/test_3mf/Prusa.stl";
-        REQUIRE(load_stl(src_file.c_str(), &model));
-        model.add_default_instances();
-
-        WHEN("model is rotated, scaled and set as sinking") {
-            ModelObject* object = model.objects[0];
-            object->center_around_origin(false);
-
-	    // This outputs the same exact data as the Prusaslicer test
-	    write_debug_stl("3mf/orca.ascii", object->volumes[0]->mesh());
-
-            // set instance's attitude so that it is rotated, scaled (and sinking? how is it sinking? the rotation? does it matter if it's sinking?)
-            ModelInstance* instance = object->instances[0];
-            instance->set_rotation(X, -M_PI / 4.0);
-            instance->set_offset(Vec3d::Zero());
-            instance->set_scaling_factor({ 2.0, 2.0, 2.0 });
-
-            // calculate 2D convex hull
-	    auto trafo = instance->get_transformation().get_matrix();
-
-	    // This matrix is the same exact matrix as the Prusaslicer test
-	    CAPTURE(trafo);
-            Polygon hull_2d = object->convex_hull_2d(trafo);
-
-	    // But we get different hull_2d.points here (and somehow decimal numbers despite being int64_t values, but that's probabaly printing configuration somewhere -- Prusaslicer's prints out with newlines between the X&Y and not one between coordinates, which is about the worse possible output).
-	    // I think it's something to do with PrusaSlicer ignoring everything under the Z plane, which makes sense from the results.
-	    // See the comments added to ModelObject::convex_hull_2d for more information.
-
-            // verify result
-            Points result = {
-                { -91501496, -15914144 },
-                { 91501496, -15914144 },
-                { 91501496, 4243 },
-                { 78229680, 4246883 },
-                { 56898100, 4246883 },
-                { -85501496, 4242641 },
-                { -91501496, 4243 }
-            };
-
-            THEN("2D convex hull should match with reference") {
-                // Allow 1um error due to floating point rounding.
-                bool res = hull_2d.points.size() == result.size();
-                if (res) {
-                    for (size_t i = 0; i < result.size(); ++ i) {
-                        const Point &p1 = result[i];
-                        const Point &p2 = hull_2d.points[i];
-                        CHECK((std::abs(p1.x() - p2.x()) > 1 || std::abs(p1.y() - p2.y()) > 1));
-                    }
-                }
-
-                CAPTURE(hull_2d.points);
-                REQUIRE(res);
-            }
-        }
-    }
-}
diff --git a/tests/libslic3r/test_model.cpp b/tests/libslic3r/test_model.cpp
new file mode 100644
index 0000000000..3a580e3be2
--- /dev/null
+++ b/tests/libslic3r/test_model.cpp
@@ -0,0 +1,40 @@
+#include 
+
+#include "libslic3r/Model.hpp"
+
+using namespace Slic3r;
+
+// convex_hull_2d does not clip geometry below the bed, so these cases avoid
+// sinking transforms.
+TEST_CASE("A part's 2D convex hull is its footprint projected onto the bed", "[Model]")
+{
+    Model model;
+    ModelObject* object = model.add_object();
+    // Keep the cube's raw coordinates ([0,20] on every axis): the default
+    // add_volume re-centers the geometry, which would move the footprint.
+    object->add_volume(make_cube(20, 20, 20), ModelVolumeType::MODEL_PART, false);
+
+    SECTION("identity transform yields the 20 mm square") {
+        const Polygon hull   = object->convex_hull_2d(Geometry::Transformation{}.get_matrix());
+        const BoundingBox bb = hull.bounding_box();
+        CHECK(hull.size() == 4);
+        CHECK(bb.min.x() == scaled(0.));
+        CHECK(bb.min.y() == scaled(0.));
+        CHECK(bb.max.x() == scaled(20.));
+        CHECK(bb.max.y() == scaled(20.));
+    }
+
+    SECTION("scaling and offset move and grow the footprint") {
+        Geometry::Transformation t;
+        t.set_scaling_factor({2, 2, 2}); // cube now spans [0,40]
+        t.set_offset({10, 5, 0});        // then shift +10 in X, +5 in Y
+
+        const Polygon hull   = object->convex_hull_2d(t.get_matrix());
+        const BoundingBox bb = hull.bounding_box();
+        CHECK(hull.size() == 4);
+        CHECK(bb.min.x() == scaled(10.));
+        CHECK(bb.min.y() == scaled(5.));
+        CHECK(bb.max.x() == scaled(50.));
+        CHECK(bb.max.y() == scaled(45.));
+    }
+}
diff --git a/tests/libslic3r/test_preset_bundle_loading.cpp b/tests/libslic3r/test_preset_bundle_loading.cpp
index 351535dd9d..c697c4461c 100644
--- a/tests/libslic3r/test_preset_bundle_loading.cpp
+++ b/tests/libslic3r/test_preset_bundle_loading.cpp
@@ -488,3 +488,69 @@ TEST_CASE("Plugin capability override keys are scoped per preset type", "[Preset
         }
 }
 
+namespace {
+
+// A standalone filament collection that exposes the protected library masking builder, so the Orca
+// Filament Library scenario can be set up without the full system-profile load pipeline.
+struct LibraryFilamentTestCollection : public PresetCollection
+{
+    LibraryFilamentTestCollection()
+        : PresetCollection(Preset::TYPE_FILAMENT, Preset::filament_options(),
+                           static_cast(FullPrintConfig::defaults()))
+    {}
+    using PresetCollection::update_library_profile_excluded_from;
+};
+
+} // namespace
+
+// Orca: a filament in the Orca Filament Library that names its compatible printers has to hide the generic
+// library filament sharing its alias, the same way a vendor owned filament does. Otherwise both are compatible
+// with that printer and the plater combo box lists the shared alias twice.
+TEST_CASE("A printer specific filament supersedes the generic library filament with the same alias", "[Preset][Bundle]")
+{
+    LibraryFilamentTestCollection filaments;
+    PresetCollection              printers(Preset::TYPE_PRINTER, Preset::printer_options(),
+                                           static_cast(FullPrintConfig::defaults()));
+    // The masking keys off the vendor name, which VendorProfile's constructor does not derive from the id.
+    VendorProfile                 library(PresetBundle::ORCA_FILAMENT_LIBRARY);
+    VendorProfile                 vendor("Vendor");
+    library.name = PresetBundle::ORCA_FILAMENT_LIBRARY;
+    vendor.name  = "Vendor";
+
+    auto add_filament = [&filaments](const VendorProfile &owner, const std::string &name, std::vector compatible_printers) {
+        Preset &preset = add_inmemory_preset(filaments, name);
+        preset.alias   = "Generic ABS";
+        preset.vendor  = &owner;
+        preset.config.option("compatible_printers", true)->values = std::move(compatible_printers);
+    };
+
+    add_filament(library, "Generic ABS @System", {});
+    add_filament(library, "Generic ABS @Printer A", { "Printer A" });
+    add_filament(vendor,  "Generic ABS @Printer B", { "Printer B" });
+
+    filaments.update_library_profile_excluded_from();
+
+    const Preset *generic = filaments.find_preset("Generic ABS @System");
+    REQUIRE(generic != nullptr);
+    CHECK(generic->m_excluded_from.count("Printer A") == 1);
+    CHECK(generic->m_excluded_from.count("Printer B") == 1);
+    CHECK(generic->m_excluded_from.size() == 2);
+
+    // A printer specific profile names printers, so it is never the one being hidden - not even by itself.
+    const Preset *specific = filaments.find_preset("Generic ABS @Printer A");
+    REQUIRE(specific != nullptr);
+    CHECK(specific->m_excluded_from.empty());
+
+    // ...and the generic profile really drops out of the compatible set on the printer it is hidden from.
+    add_inmemory_preset(printers, "Printer A");
+    add_inmemory_preset(printers, "Printer C");
+    const Preset *printer_a = printers.find_preset("Printer A");
+    const Preset *printer_c = printers.find_preset("Printer C");
+    REQUIRE(printer_a != nullptr);
+    REQUIRE(printer_c != nullptr);
+
+    const PresetWithVendorProfile generic_lib(*generic, &library);
+    CHECK_FALSE(is_compatible_with_printer(generic_lib, PresetWithVendorProfile(*printer_a, nullptr)));
+    CHECK(is_compatible_with_printer(generic_lib, PresetWithVendorProfile(*printer_c, nullptr)));
+}
+