juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-09-16 13:32:44 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix review findings in the shared wipe tower estimate

Browse Source 
A raft is not a reason to reserve a tower. Print::apply runs
normalize_fdm_2, which clears enable_prime_tower for a plate that purges
one filament unless smooth timelapse or wrapping detection is on, so a
single-filament plate with a raft prints no tower at all and the estimate
was reserving bed area for one. Drop the input; need_wipe_tower is now
exactly the two exceptions normalize_fdm_2 honours, named there so the
next reason added has to be checked against it.

The GUI preview and the validation containment check each re-derived
"is a tower printed here" from the filament count instead of reading the
estimate, so both missed the towers printed with no tool change to purge
for. They now take the answer from the footprint, which is the drift this
shared estimate exists to remove. A tower that is not printed estimates to
zero, so its hull is degenerate and every check on it passes trivially -
the containment check needs no gate of its own.

WipeTowerData::width was written only by the pre-generation estimate and
left at zero for the whole post-generation life of the Print, while its
neighbour depth held the real value. Set it from the generator in both
branches.

The plate's height scan transformed every model part's full mesh per
instance on each scene reload, discarding all but the z extent. The
cached convex hull has the same z extent.

A plate loaded from a sliced .gcode.3mf holds no objects and its filaments
live in slice_filaments_info; the config-taking get_extruders overload
returned an empty list for it, which sized the tower for a placeholder two
filaments. It now answers the way the wx overload does, without reaching
the plater.

Also drop estimate_wipe_tower_size, which has no callers.
This commit is contained in:
Hanif Koh
2026-09-09 15:45:16 +08:00
committed by HanifKoh
parent 8df5e5e738
commit e1efec7d6c
9 changed files with 154 additions and 76 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/libslic3r/Print.cpp
+14 -15
View File
@@ -1081,22 +1081,21 @@ static StringObjectException layered_print_cleareance_valid(const Print &print,
if (print_config.enable_wrapping_detection.value && !intersection({wrapping_poly}, convex_hulls_temp).empty()) {
return {L("Prime Tower") + L(" is too close to clumping detection area, and collisions will be caused.\n")};
}
// Skip the containment check for towers that will never be printed (single-filament
// prints without smooth timelapse keep the config's tower position but emit nothing).
// No gate on "is there a tower": one that is not printed estimates to zero, so the hull
// is degenerate and every check passes. Re-deriving it here missed the wrapping-detection
// tower on a single-filament plate.
// Pre-generation only the body square is tested — the auto-brim estimate can overshoot
// the generated brim by several mm and must not hard-fail a print that physically fits.
// Post-generation the mesh bottom already includes the real brim, so the exact
// footprint is tested.
if (filaments_count > 1 || print.enable_timelapse_print()) {
// The shared printable polygon is plate-local, while the tower polygons above are
// already shifted by the plate origin.
Polygons printable_polys = print.get_extruder_shared_printable_polygon();
const Point plate_shift(scale_(plate_origin.x()), scale_(plate_origin.y()));
for (Polygon &p : printable_polys)
p.translate(plate_shift);
if (!diff(convex_hulls_temp, printable_polys).empty())
return {L("Prime Tower") + L(" is partially outside the printable area, and it cannot be printed.\n")};
}
// The shared printable polygon is plate-local, while the tower polygons above are
// already shifted by the plate origin.
Polygons printable_polys = print.get_extruder_shared_printable_polygon();
const Point plate_shift(scale_(plate_origin.x()), scale_(plate_origin.y()));
for (Polygon &p : printable_polys)
p.translate(plate_shift);
if (!diff(convex_hulls_temp, printable_polys).empty())
return {L("Prime Tower") + L(" is partially outside the printable area, and it cannot be printed.\n")};
return {};
}
@@ -4005,16 +4004,14 @@ const WipeTowerData &Print::wipe_tower_data(size_t filaments_cnt) const
double max_height = 0.;
double layer_height = std::numeric_limits<double>::max();
bool any_raft = false;
for (const PrintObject *object : m_objects) {
max_height = std::max(max_height, unscale_(double(object->size().z())));
layer_height = std::min(layer_height, object->config().layer_height.value);
any_raft = any_raft || object->config().raft_layers.value > 0;
}
if (max_height < EPSILON)
return m_wipe_tower_data;
const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(m_config, filaments_cnt, layer_height, max_height, any_raft);
const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(m_config, filaments_cnt, layer_height, max_height);
WipeTowerData &data = const_cast<Print *>(this)->m_wipe_tower_data;
data.depth = float(footprint.depth);
data.width = float(footprint.width);
@@ -4244,6 +4241,7 @@ void Print::_make_wipe_tower()
m_wipe_tower_data.tool_changes.reserve(m_wipe_tower_data.tool_ordering.layer_tools().size());
wipe_tower.generate_new(m_wipe_tower_data.tool_changes);
m_wipe_tower_data.depth = wipe_tower.get_depth();
m_wipe_tower_data.width = wipe_tower.width();
m_wipe_tower_data.brim_width = wipe_tower.get_brim_width();
m_wipe_tower_data.bbx = wipe_tower.get_bbx();
m_wipe_tower_data.rib_offset = wipe_tower.get_rib_offset();
@@ -4357,6 +4355,7 @@ void Print::_make_wipe_tower()
m_wipe_tower_data.tool_changes.reserve(m_wipe_tower_data.tool_ordering.layer_tools().size());
wipe_tower.generate(m_wipe_tower_data.tool_changes);
m_wipe_tower_data.depth = wipe_tower.get_depth();
m_wipe_tower_data.width = wipe_tower.width();
m_wipe_tower_data.z_and_depth_pairs = wipe_tower.get_z_and_depth_pairs();
m_wipe_tower_data.brim_width = wipe_tower.get_brim_width();
m_wipe_tower_data.height = wipe_tower.get_wipe_tower_height();