2.2.1 - test (#86)

resources/web/flutter_web/assets/assets/i10n/en.json

@@ -92,7 +92,6 @@
   "Upload Image": "Upload Image",
   "Upload File": "Upload File",
 
-
   "Device Control": "Control",
   "Create New Project": "NewProject",
   "Waiting for device authorization": "Waiting for device authorization...",
@@ -269,7 +268,6 @@
 
   "cancel_print_confirm_message": "Cancel printing Do you want to cancel the printing task ? ",
 
-
   "Tips": "Tips",
   "close_led_confirm_message": "AI monitoring is enabled. Turning off the LED may reduce detection accuracy. Turn it off anyway?",
 
@@ -315,7 +313,11 @@
 
   "Network may be unstable, device connection may be unreliable.": "Network may be unstable, device connection may be unreliable",
   "network_unstable_partial_operation_failed": "Network unstable, partial operation may failed",
-
+  "camera_turn_off_countdown": "Camera turn-off countdown",
+  "continue_camera": "Continue",
+  "camera_auto_shutdown_message": "The camera has been unused for a long time. To reduce power consumption, it has automatically shut down.",
+  "got_it": "Got it",
+  "monitoring_module_hibernated": "Note : Monitoring Module hibernated. Click Play to wake it up.",
 
   "Check": "Check",
   "default_exception_title": "Exception",
@@ -602,14 +604,14 @@
   "error_0002052300020035_desc": "Check if the current toolhead is properly picked and placed, and ensure all idle toolheads on the dock are securely installed. Reinstall any misaligned toolheads, then tap to resume the task.",
   "error_0002052300030035_title": "Toolhead Swapping Anomaly",
   "error_0002052300030035_desc": "Check if the current toolhead is properly picked and placed, and ensure all idle toolheads on the dock are securely installed. Reinstall any misaligned toolheads, then tap to resume the task.",
-  "error_0003052300000036_title": "Nozzle Temperature Exceeded",
+  "error_0003052300000036_title": "Nozzle Temperature Out of Range",
-  "error_0003052300000036_desc": "Toolhead 1 nozzle target temperature exceeded limit. Check the G-code file. It is recommended to use G-code files exported by Snapmaker Orca for printing.",
+  "error_0003052300000036_desc": "Nozzle temperature set for Toolhead 1 is outside the allowable range. Reset to valid parameters.",
-  "error_0003052300010036_title": "Nozzle Temperature Exceeded",
+  "error_0003052300010036_title": "Nozzle Temperature Out of Range",
-  "error_0003052300010036_desc": "Toolhead 2 nozzle target temperature exceeded limit. Check the G-code file. It is recommended to use G-code files exported by Snapmaker Orca for printing.",
+  "error_0003052300010036_desc": "Nozzle temperature set for Toolhead 2 is outside the allowable range. Reset to valid parameters.",
-  "error_0003052300020036_title": "Nozzle Temperature Exceeded",
+  "error_0003052300020036_title": "Nozzle Temperature Out of Range",
-  "error_0003052300020036_desc": "Toolhead 3 nozzle target temperature exceeded limit. Check the G-code file. It is recommended to use G-code files exported by Snapmaker Orca for printing.",
+  "error_0003052300020036_desc": "Nozzle temperature set for Toolhead 3 is outside the allowable range. Reset to valid parameters.",
-  "error_0003052300030036_title": "Nozzle Temperature Exceeded",
+  "error_0003052300030036_title": "Nozzle Temperature Out of Range",
-  "error_0003052300030036_desc": "Toolhead 4 nozzle target temperature exceeded limit. Check the G-code file. It is recommended to use G-code files exported by Snapmaker Orca for printing.",
+  "error_0003052300030036_desc": "Nozzle temperature set for Toolhead 4 is outside the allowable range. Reset to valid parameters.",
   "error_0002052300009000_title": "Flow Calibration Anomaly",
   "error_0002052300009000_desc": "Toolhead 1 flow calibration anomaly. Contact technical support.",
   "error_0002052300019000_title": "Flow Calibration Anomaly",
@@ -748,9 +750,388 @@
   "error_0001053100000007_desc": "Cloud print file download failed. Check your network connection and retry. If issue persists, contact technical support.",
   "error_0001053100000008_title": "System Anomaly",
   "error_0001053100000008_desc": "USB flash drive read anomaly. Ensure the USB flash drive is properly connected and retry. If issue persists, contact technical support.",
-  "camera_turn_off_countdown": "Camera turn-off countdown",
+  "error_0003052200000000_title": "System Anomaly",
-  "continue_camera": "Continue",
+  "error_0003052200000000_desc": "See anomaly details. Contact technical support.",
-    "camera_auto_shutdown_message": "The camera has been unused for a long time. To reduce power consumption, it has automatically shut down.",
+  "error_0003052200000001_title": "System Anomaly",
-  "got_it": "Got it",
+  "error_0003052200000001_desc": "Contact technical support.",
-  "monitoring_module_hibernated": "Note : Monitoring Module hibernated. Click Play to wake it up."
+  "error_0003052200000002_title": "System Anomaly",
+  "error_0003052200000002_desc": "Printer stopped. See anomaly details. Contact technical support.",
+  "error_0003052200000003_title": "System Failed to Start",
+  "error_0003052200000003_desc": "Configuration load anomaly. Contact technical support or restore factory settings.",
+  "error_0003052200000004_title": "System Failed to Start",
+  "error_0003052200000004_desc": "Configuration load anomaly. Contact technical support or restore factory settings.",
+  "error_0003052200000005_title": "System Failed to Start",
+  "error_0003052200000005_desc": "Communication protocol load anomaly. Contact technical support or update firmware.",
+  "error_0003052200000006_title": "System Failed to Start",
+  "error_0003052200000006_desc": "Host MCU connection failed. Contact technical support.",
+  "error_0003052200010006_title": "System Failed to Start",
+  "error_0003052200010006_desc": "Mainboard MCU connection failed. Contact technical support.",
+  "error_0003052200020006_title": "System Failed to Start",
+  "error_0003052200020006_desc": "Toolhead 1 MCU connection failed. Power off printer, check toolhead cable, then restart printer. If issue persists, contact technical support.",
+  "error_0003052200030006_title": "System Failed to Start",
+  "error_0003052200030006_desc": "Toolhead 2 MCU connection failed. Power off printer, check toolhead cable, then restart printer. If issue persists, contact technical support.",
+  "error_0003052200040006_title": "System Failed to Start",
+  "error_0003052200040006_desc": "Toolhead 3 MCU connection failed. Power off printer, check toolhead cable, then restart printer. If issue persists, contact technical support.",
+  "error_0003052200050006_title": "System Failed to Start",
+  "error_0003052200050006_desc": "Toolhead 4 MCU connection failed. Power off printer, check toolhead cable, then restart printer. If issue persists, contact technical support.",
+  "error_0003052200000007_title": "System Failed to Start",
+  "error_0003052200000007_desc": "Abnormal MCU connection. Contact technical support.",
+  "error_0003052200000008_title": "System Anomaly",
+  "error_0003052200000008_desc": "Host MCU connection interrupted. Contact technical support.",
+  "error_0003052200010008_title": "System Anomaly",
+  "error_0003052200010008_desc": "Mainboard MCU connection interrupted. Contact technical support.",
+  "error_0003052200020008_title": "System Anomaly",
+  "error_0003052200020008_desc": "Toolhead 1 MCU connection interrupted. Power off printer, check Toolhead 1 cable, then restart to resume operation.",
+  "error_0003052200030008_title": "System Anomaly",
+  "error_0003052200030008_desc": "Toolhead 2 MCU connection interrupted. Power off printer, check Toolhead 2 cable, then restart to resume operation.",
+  "error_0003052200040008_title": "System Anomaly",
+  "error_0003052200040008_desc": "Toolhead 3 MCU connection interrupted. Power off printer, check Toolhead 3 cable, then restart to resume operation.",
+  "error_0003052200050008_title": "System Anomaly",
+  "error_0003052200050008_desc": "Toolhead 4 MCU connection interrupted. Power off printer, check Toolhead 4 cable, then restart to resume operation.",
+  "error_0003052200000009_title": "Sensor Anomaly",
+  "error_0003052200000009_desc": "Accelerometer storage anomaly. Try powering off and restarting to resume. If the problem recurs, contact technical support.",
+  "error_0003052200000010_title": "Sensor Anomaly",
+  "error_0003052200000010_desc": "Accelerometer failed to obtain valid device ID. Try powering off and restarting to resume. If the problem recurs, contact technical support.",
+  "error_0003052200000011_title": "Motor Driver Anomaly",
+  "error_0003052200000011_desc": "Motor driver anomaly. See anomaly details. Contact technical support.",
+  "error_0003052200000012_title": "Axis Movement Anomaly",
+  "error_0003052200000012_desc": "Tap Home first, then move the X axis.",
+  "error_0003052200010012_title": "Axis Movement Anomaly",
+  "error_0003052200010012_desc": "Tap Home first, then move the Y axis.",
+  "error_0003052200020012_title": "Axis Movement Anomaly",
+  "error_0003052200020012_desc": "Tap Home first, then move the Z axis.",
+  "error_0003052200000013_title": "Axis Movement Anomaly",
+  "error_0003052200000013_desc": "X-axis movement exceeded travel limit.",
+  "error_0003052200010013_title": "Axis Movement Anomaly",
+  "error_0003052200010013_desc": "Y-axis movement exceeded travel limit.",
+  "error_0003052200020013_title": "Axis Movement Anomaly",
+  "error_0003052200020013_desc": "Z-axis movement exceeded travel limit.",
+  "error_0003052200000014_title": "Sensor Anomaly",
+  "error_0003052200000014_desc": "ADC sensor configuration exceeded limit. System has shut down for protection. Export printer logs and contact technical support.",
+  "error_0003052200000015_title": "Temperature Anomaly",
+  "error_0003052200000015_desc": "Heating module failed to heat up normally. System has shut down for protection. Export printer logs and contact technical support.",
+  "error_0003052200000016_title": "System Anomaly",
+  "error_0003052200000016_desc": "Host MCU control timed out. System has shut down for protection. Contact technical support.",
+  "error_0003052200010016_title": "System Anomaly",
+  "error_0003052200010016_desc": "Mainboard MCU control timed out. System has shut down for protection. Contact technical support.",
+  "error_0003052200020016_title": "System Anomaly",
+  "error_0003052200020016_desc": "Toolhead 1 MCU control timed out. System has shut down for protection. Power off printer, check Toolhead 1 cable, then restart to resume operation.",
+  "error_0003052200030016_title": "System Anomaly",
+  "error_0003052200030016_desc": "Toolhead 2 MCU control timed out. System has shut down for protection. Power off printer, check Toolhead 2 cable, then restart to resume operation.",
+  "error_0003052200040016_title": "System Anomaly",
+  "error_0003052200040016_desc": "Toolhead 3 MCU control timed out. System has shut down for protection. Power off printer, check Toolhead 3 cable, then restart to resume operation.",
+  "error_0003052200050016_title": "System Anomaly",
+  "error_0003052200050016_desc": "Toolhead 4 MCU control timed out. System has shut down for protection. Power off printer, check Toolhead 4 cable, then restart to resume operation.",
+  "error_0003052200000017_title": "System Anomaly",
+  "error_0003052200000017_desc": "Mainboard MCU detected power-off signal. System has shut down for protection. Contact technical support.",
+  "error_0003052200010017_title": "System Anomaly",
+  "error_0003052200010017_desc": "Toolhead 1 MCU detected power-off signal. System has shut down for protection. Contact technical support.",
+  "error_0003052200020017_title": "System Anomaly",
+  "error_0003052200020017_desc": "Toolhead 2 MCU detected power-off signal. System has shut down for protection. Contact technical support.",
+  "error_0003052200030017_title": "System Anomaly",
+  "error_0003052200030017_desc": "Toolhead 3 MCU detected power-off signal. System has shut down for protection. Contact technical support.",
+  "error_0003052200040017_title": "System Anomaly",
+  "error_0003052200040017_desc": "Toolhead 4 MCU detected power-off signal. System has shut down for protection. Contact technical support.",
+  "error_0003052600000000_title": "Heated Bed Temperature Abnormal",
+  "error_0003052600000000_desc": "Possible temperature sensor failure. Contact Technical Support.",
+  "error_0003052600000001_title": "Heated Bed Temperature Abnormal",
+  "error_0003052600000001_desc": "Heated bed heating anomaly. Contact technical support.",
+  "error_0003052700000000_title": "Chamber Temperature Abnormal",
+  "error_0003052700000000_desc": "Check and ensure the temperature sensor cable is properly connected, or contact Technical Support.",
+  "error_0003053000000000_title": "Calibration Anomaly",
+  "error_0003053000000000_desc": "Toolhead 1 calibration sensor anomaly. Check if the calibration sensor is disconnected. For assistance, contact technical support.",
+  "error_0003053000010000_title": "Calibration Anomaly",
+  "error_0003053000010000_desc": "Toolhead 2 calibration sensor anomaly. Check if the calibration sensor is disconnected. For assistance, contact technical support.",
+  "error_0003053000020000_title": "Calibration Anomaly",
+  "error_0003053000020000_desc": "Toolhead 3 calibration sensor anomaly. Check if the calibration sensor is disconnected. For assistance, contact technical support.",
+  "error_0003053000030000_title": "Calibration Anomaly",
+  "error_0003053000030000_desc": "Toolhead 4 calibration sensor anomaly. Check if the calibration sensor is disconnected. For assistance, contact technical support.",
+  "error_0003053000000001_title": "Calibration Anomaly",
+  "error_0003053000000001_desc": "Toolhead 1 calibration sensor anomaly. Sensor data exceeded allowable range. Contact technical support.",
+  "error_0003053000010001_title": "Calibration Anomaly",
+  "error_0003053000010001_desc": "Toolhead 2 calibration sensor anomaly. Sensor data exceeded allowable range. Contact technical support.",
+  "error_0003053000020001_title": "Calibration Anomaly",
+  "error_0003053000020001_desc": "Toolhead 3 calibration sensor anomaly. Sensor data exceeded allowable range. Contact technical support.",
+  "error_0003053000030001_title": "Calibration Anomaly",
+  "error_0003053000030001_desc": "Toolhead 4 calibration sensor anomaly. Sensor data exceeded allowable range. Contact technical support.",
+  "error_0003053000000002_title": "Calibration Anomaly",
+  "error_0003053000000002_desc": "Toolhead must be homed before calibration module works. Home and retry. If issue persists, contact technical support.",
+  "error_0003053000000003_title": "Calibration Anomaly",
+  "error_0003053000000003_desc": "Incorrect calibration parameters. Contact technical support.",
+  "error_0003053000000004_title": "Calibration Anomaly",
+  "error_0003053000000004_desc": "Calibration failed. Check if toolhead is properly positioned, manually return to home position, then retry. If issue persists, contact technical support.",
+  "error_0003053000000005_title": "Calibration Anomaly",
+  "error_0003053000000005_desc": "Incorrect operation command. Check if toolheads match placement position numbers, ensure numbers match, then retry. If issue persists, contact technical support.",
+  "error_0003053000000006_title": "Calibration Anomaly",
+  "error_0003053000000006_desc": "Calibration module model of current toolhead does not match. Contact technical support.",
+  "error_0003053000000007_title": "Calibration Anomaly",
+  "error_0003053000000007_desc": "Probe command anomaly. Axes other than X, Y, Z are used. Use correct commands.",
+  "error_0003053000000008_title": "Calibration Anomaly",
+  "error_0003053000000008_desc": "Check the X axis for any obstructions and if toolhead nozzle has residual material. Clean and retry. If issue persists, contact technical support.",
+  "error_0003053000010008_title": "Calibration Anomaly",
+  "error_0003053000010008_desc": "Check the Y axis for any obstructions and if toolhead nozzle has residual material. Clean and retry. If issue persists, contact technical support.",
+  "error_0003053000020008_title": "Calibration Anomaly",
+  "error_0003053000020008_desc": "Check if Z axis for any obstructions and if toolhead nozzle has residual material. Clean and retry. If issue persists, contact technical support.",
+  "error_0003053000000009_title": "Calibration Anomaly",
+  "error_0003053000000009_desc": "Calibration unavailable due to system anomaly. Contact technical support.",
+  "error_0003053000000010_title": "Heated Bed Detection Anomaly",
+  "error_0003053000000010_desc": "PEI sheet detected as removed. Place PEI sheet and retry printing.",
+  "error_0003053000000011_title": "Heated Bed Detection Anomaly",
+  "error_0003053000000011_desc": "PEI sheet detected as not removed. Remove PEI sheet and retry calibration.",
+  "error_0003053000000012_title": "Heated Bed Detection Anomaly",
+  "error_0003053000000012_desc": "Heated bed detection anomaly. Contact technical support.",
+  "error_0001053100000000_title": "System Anomaly",
+  "error_0001053100000000_desc": "Failed to retrieve file list.",
+  "error_0001053100000001_title": "System Anomaly",
+  "error_0001053100000001_desc": "Printer is printing, cannot operate slicing files. Retry when printer is idle.",
+  "error_0001053100000002_title": "System Anomaly",
+  "error_0001053100000002_desc": "Commands M28, M29, M30 are not supported. Please remove them.",
+  "error_0001053100000003_title": "System Anomaly",
+  "error_0001053100000003_desc": "Parsing G-code commands from slicing file. Resetting slicing file is not allowed.",
+  "error_0001053100000004_title": "System Anomaly",
+  "error_0001053100000004_desc": "Cannot open slicing file.",
+  "error_0001053100000005_title": "System Anomaly",
+  "error_0001053100000005_desc": "Failed to resume printing after power outage.",
+  "error_0001053100000006_title": "System Anomaly",
+  "error_0001053100000006_desc": "Deleting power-off data is not allowed during printing.",
+  "error_0001052500000010_title": "Filament Pre-loading Anomaly",
+  "error_0001052500000010_desc": "Feeder 1 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500010010_title": "Filament Pre-loading Anomaly",
+  "error_0001052500010010_desc": "Feeder 2 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500020010_title": "Filament Pre-loading Anomaly",
+  "error_0001052500020010_desc": "Feeder 3 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500030010_title": "Filament Pre-loading Anomaly",
+  "error_0001052500030010_desc": "Feeder 4 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500000011_title": "Filament Pre-loading Anomaly",
+  "error_0001052500000011_desc": "Feeder 1 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0001052500010011_title": "Filament Pre-loading Anomaly",
+  "error_0001052500010011_desc": "Feeder 2 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0001052500020011_title": "Filament Pre-loading Anomaly",
+  "error_0001052500020011_desc": "Feeder 3 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0001052500030011_title": "Filament Pre-loading Anomaly",
+  "error_0001052500030011_desc": "Feeder 4 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0001052500000012_title": "Filament Pre-loading Anomaly",
+  "error_0001052500000012_desc": "Feeder 1 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500010012_title": "Filament Pre-loading Anomaly",
+  "error_0001052500010012_desc": "Feeder 2 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500020012_title": "Filament Pre-loading Anomaly",
+  "error_0001052500020012_desc": "Feeder 3 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500030012_title": "Filament Pre-loading Anomaly",
+  "error_0001052500030012_desc": "Feeder 4 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500000013_title": "Filament Pre-loading Anomaly",
+  "error_0001052500000013_desc": "No filament detected in Feeder 1. Insert filament.",
+  "error_0001052500010013_title": "Filament Pre-loading Anomaly",
+  "error_0001052500010013_desc": "No filament detected in Feeder 2. Insert filament.",
+  "error_0001052500020013_title": "Filament Pre-loading Anomaly",
+  "error_0001052500020013_desc": "No filament detected in Feeder 3. Insert filament.",
+  "error_0001052500030013_title": "Filament Pre-loading Anomaly",
+  "error_0001052500030013_desc": "No filament detected in Feeder 4. Insert filament.",
+  "error_0001052500000014_title": "Filament Pre-loading Anomaly",
+  "error_0001052500000014_desc": "Feeder 1 feeding timeout. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500010014_title": "Filament Pre-loading Anomaly",
+  "error_0001052500010014_desc": "Feeder 2 feeding timeout. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500020014_title": "Filament Pre-loading Anomaly",
+  "error_0001052500020014_desc": "Feeder 3 feeding timeout. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500030014_title": "Filament Pre-loading Anomaly",
+  "error_0001052500030014_desc": "Feeder 4 feeding timeout. The filament may be tangled or the feeding path obstructed. Reload the filament after resolving the issue.",
+  "error_0001052500000015_title": "Filament Pre-loading Anomaly",
+  "error_0001052500000015_desc": "Residual filament in Toolhead 1. Remove the residual filament from the toolhead, then reload.",
+  "error_0001052500010015_title": "Filament Pre-loading Anomaly",
+  "error_0001052500010015_desc": "Residual filament in Toolhead 2. Remove the residual filament from the toolhead, then reload.",
+  "error_0001052500020015_title": "Filament Pre-loading Anomaly",
+  "error_0001052500020015_desc": "Residual filament in Toolhead 3. Remove the residual filament from the toolhead, then reload.",
+  "error_0001052500030015_title": "Filament Pre-loading Anomaly",
+  "error_0001052500030015_desc": "Residual filament in Toolhead 4. Remove the residual filament from the toolhead, then reload.",
+  "error_0002052500000030_title": "Filament Loading Anomaly",
+  "error_0002052500000030_desc": "Feeder 1 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500010030_title": "Filament Loading Anomaly",
+  "error_0002052500010030_desc": "Feeder 2 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500020030_title": "Filament Loading Anomaly",
+  "error_0002052500020030_desc": "Feeder 3 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500030030_title": "Filament Loading Anomaly",
+  "error_0002052500030030_desc": "Feeder 4 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500000031_title": "Filament Loading Anomaly",
+  "error_0002052500000031_desc": "Feeder 1 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0002052500010031_title": "Filament Loading Anomaly",
+  "error_0002052500010031_desc": "Feeder 2 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0002052500020031_title": "Filament Loading Anomaly",
+  "error_0002052500020031_desc": "Feeder 3 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0002052500030031_title": "Filament Loading Anomaly",
+  "error_0002052500030031_desc": "Feeder 4 motor speed anomaly. Check and ensure the feeder cable is properly connected. If the error persists, contact Technical Support.",
+  "error_0002052500000032_title": "Filament Loading Anomaly",
+  "error_0002052500000032_desc": "Feeder 1 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500010032_title": "Filament Loading Anomaly",
+  "error_0002052500010032_desc": "Feeder 2 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500020032_title": "Filament Loading Anomaly",
+  "error_0002052500020032_desc": "Feeder 3 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500030032_title": "Filament Loading Anomaly",
+  "error_0002052500030032_desc": "Feeder 4 encoder wheel speed anomaly. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500000033_title": "Filament Loading Anomaly",
+  "error_0002052500000033_desc": "No filament detected in Feeder 1. Insert filament.",
+  "error_0002052500010033_title": "Filament Loading Anomaly",
+  "error_0002052500010033_desc": "No filament detected in Feeder 2. Insert filament.",
+  "error_0002052500020033_title": "Filament Loading Anomaly",
+  "error_0002052500020033_desc": "No filament detected in Feeder 3. Insert filament.",
+  "error_0002052500030033_title": "Filament Loading Anomaly",
+  "error_0002052500030033_desc": "No filament detected in Feeder 4. Insert filament.",
+  "error_0002052500000034_title": "Filament Loading Anomaly",
+  "error_0002052500000034_desc": "Feeder 1 feeding timeout. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500010034_title": "Filament Loading Anomaly",
+  "error_0002052500010034_desc": "Feeder 2 feeding timeout. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500020034_title": "Filament Loading Anomaly",
+  "error_0002052500020034_desc": "Feeder 3 feeding timeout. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500030034_title": "Filament Loading Anomaly",
+  "error_0002052500030034_desc": "Feeder 4 feeding timeout. The filament may be tangled or the feeding path obstructed. Tap to resume, or reload the filament after resolving the issue.",
+  "error_0002052500000035_title": "Filament Loading Anomaly",
+  "error_0002052500000035_desc": "Feeder 1 feeding stroke overrun. Check if the filament tube has detached from this feeder. After reconnecting, tap to resume, or reload the filament.",
+  "error_0002052500010035_title": "Filament Loading Anomaly",
+  "error_0002052500010035_desc": "Feeder 2 feeding stroke overrun. Check if the filament tube has detached from this feeder. After reconnecting, tap to resume, or reload the filament.",
+  "error_0002052500020035_title": "Filament Loading Anomaly",
+  "error_0002052500020035_desc": "Feeder 3 feeding stroke overrun. Check if the filament tube has detached from this feeder. After reconnecting, tap to resume, or reload the filament.",
+  "error_0002052500030035_title": "Filament Loading Anomaly",
+  "error_0002052500030035_desc": "Feeder 4 feeding stroke overrun. Check if the filament tube has detached from this feeder. After reconnecting, tap to resume, or reload the filament.",
+  "error_0002052500000050_title": "Extrusion Anomaly",
+  "error_0002052500000050_desc": "Feeder 1 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500010050_title": "Extrusion Anomaly",
+  "error_0002052500010050_desc": "Feeder 2 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500020050_title": "Extrusion Anomaly",
+  "error_0002052500020050_desc": "Feeder 3 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500030050_title": "Extrusion Anomaly",
+  "error_0002052500030050_desc": "Feeder 4 anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500000051_title": "Extrusion Anomaly",
+  "error_0002052500000051_desc": "Feeder 1 Feeding Failure. The filament may be tangled, jammed in the extrusion gears, or the nozzle may be clogged. Troubleshoot and retry.",
+  "error_0002052500010051_title": "Extrusion Anomaly",
+  "error_0002052500010051_desc": "Feeder 2 Feeding Failure. The filament may be tangled, jammed in the extrusion gears, or the nozzle may be clogged. Troubleshoot and retry.",
+  "error_0002052500020051_title": "Extrusion Anomaly",
+  "error_0002052500020051_desc": "Feeder 3 Feeding Failure. The filament may be tangled, jammed in the extrusion gears, or the nozzle may be clogged. Troubleshoot and retry.",
+  "error_0002052500030051_title": "Extrusion Anomaly",
+  "error_0002052500030051_desc": "Feeder 4 Feeding Failure. The filament may be tangled, jammed in the extrusion gears, or the nozzle may be clogged. Troubleshoot and retry.",
+  "error_0002052500000070_title": "Filament Unloading Anomaly",
+  "error_0002052500000070_desc": "Feeder 1 unloading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500010070_title": "Filament Unloading Anomaly",
+  "error_0002052500010070_desc": "Feeder 2 unloading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500020070_title": "Filament Unloading Anomaly",
+  "error_0002052500020070_desc": "Feeder 3 unloading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052500030070_title": "Filament Unloading Anomaly",
+  "error_0002052500030070_desc": "Feeder 4 unloading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500000090_title": "Manual Loading Anomaly",
+  "error_0001052500000090_desc": "Feeder 1 manual loading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500010090_title": "Manual Loading Anomaly",
+  "error_0001052500010090_desc": "Feeder 2 manual loading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500020090_title": "Manual Loading Anomaly",
+  "error_0001052500020090_desc": "Feeder 3 manual loading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0001052500030090_title": "Manual Loading Anomaly",
+  "error_0001052500030090_desc": "Feeder 4 manual loading anomaly. Tap the error code for details. It is recommended to contact Technical Support for assistance.",
+  "error_0002052300000040_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000040_desc": "Toolhead 1 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010040_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010040_desc": "Toolhead 2 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020040_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020040_desc": "Toolhead 3 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030040_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030040_desc": "Toolhead 4 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000041_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000041_desc": "Toolhead 1 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010041_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010041_desc": "Toolhead 2 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020041_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020041_desc": "Toolhead 3 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030041_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030041_desc": "Toolhead 4 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000042_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000042_desc": "Toolhead 1 return failed. Foreign objects may be present in the dock or working area. Remove any obstructions, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010042_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010042_desc": "Toolhead 2 return failed. Foreign objects may be present in the dock or working area. Remove any obstructions, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020042_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020042_desc": "Toolhead 3 return failed. Foreign objects may be present in the dock or working area. Remove any obstructions, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030042_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030042_desc": "Toolhead 4 return failed. Foreign objects may be present in the dock or working area. Remove any obstructions, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000043_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000043_desc": "Toolhead 1 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010043_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010043_desc": "Toolhead 2 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020043_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020043_desc": "Toolhead 3 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030043_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030043_desc": "Toolhead 4 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000044_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000044_desc": "Toolhead 1 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010044_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010044_desc": "Toolhead 2 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020044_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020044_desc": "Toolhead 3 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030044_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030044_desc": "Toolhead 4 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000045_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000045_desc": "Toolhead 1 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010045_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010045_desc": "Toolhead 2 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020045_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020045_desc": "Toolhead 3 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030045_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030045_desc": "Toolhead 4 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000046_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000046_desc": "Toolhead 1 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010046_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010046_desc": "Toolhead 2 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020046_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020046_desc": "Toolhead 3 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030046_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030046_desc": "Toolhead 4 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300000047_title": "Toolhead Swapping Anomaly",
+  "error_0002052300000047_desc": "Toolhead 1 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300010047_title": "Toolhead Swapping Anomaly",
+  "error_0002052300010047_desc": "Toolhead 2 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300020047_title": "Toolhead Swapping Anomaly",
+  "error_0002052300020047_desc": "Toolhead 3 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052300030047_title": "Toolhead Swapping Anomaly",
+  "error_0002052300030047_desc": "Toolhead 4 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800000013_title": "Homing Anomaly",
+  "error_0002052800000013_desc": "Toolhead 1 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800010013_title": "Homing Anomaly",
+  "error_0002052800010013_desc": "Toolhead 2 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800020013_title": "Homing Anomaly",
+  "error_0002052800020013_desc": "Toolhead 3 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800030013_title": "Homing Anomaly",
+  "error_0002052800030013_desc": "Toolhead 4 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800000014_title": "Homing Anomaly",
+  "error_0002052800000014_desc": "Toolhead 1 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800010014_title": "Homing Anomaly",
+  "error_0002052800010014_desc": "Toolhead 2 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800020014_title": "Homing Anomaly",
+  "error_0002052800020014_desc": "Toolhead 3 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0002052800030014_title": "Homing Anomaly",
+  "error_0002052800030014_desc": "Toolhead 4 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000000013_title": "Detection Anomaly",
+  "error_0003053000000013_desc": "Attach any one toolhead and retry.",
+  "error_0003053000000014_title": "Detection Anomaly",
+  "error_0003053000000014_desc": "Toolhead 1 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000010014_title": "Detection Anomaly",
+  "error_0003053000010014_desc": "Toolhead 2 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000020014_title": "Detection Anomaly",
+  "error_0003053000020014_desc": "Toolhead 3 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000030014_title": "Detection Anomaly",
+  "error_0003053000030014_desc": "Toolhead 4 detached. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000000015_title": "Detection Anomaly",
+  "error_0003053000000015_desc": "Toolhead 1 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000010015_title": "Detection Anomaly",
+  "error_0003053000010015_desc": "Toolhead 2 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000020015_title": "Detection Anomaly",
+  "error_0003053000020015_desc": "Toolhead 3 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000030015_title": "Detection Anomaly",
+  "error_0003053000030015_desc": "Toolhead 4 Pogopin contact anomaly. Clean both the toolhead and the Pogopin contacts on the toolhead swapper using a dust-free cloth. Then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000000016_title": "Detection Anomaly",
+  "error_0003053000000016_desc": "Toolhead 1 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000010016_title": "Detection Anomaly",
+  "error_0003053000010016_desc": "Toolhead 2 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000020016_title": "Detection Anomaly",
+  "error_0003053000020016_desc": "Toolhead 3 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000030016_title": "Detection Anomaly",
+  "error_0003053000030016_desc": "Toolhead 4 placement anomaly. Manually reinstall the toolhead into its dock, then tap to attempt resuming the job. If the error persists, contact Technical Support.",
+  "error_0003053000030017_title": "Heated Bed Detection Anomaly",
+  "error_0003053000030017_desc": "The PEI sheet is not properly positioned. Correctly place the PEI sheet and retry.",
+  "error_0002053200000001_title": "Possible Foreign Object Detected on Print Bed",
+  "error_0002053200000001_desc": "Please check and remove any foreign objects. If none are found, click Continue to resume printing.",
+  "error_0002053200000002_title": "Possible Spaghetti Defect Detected",
+  "error_0002053200000002_desc": "Please inspect the model. If any defects are acceptable—or none are found—click Continue to resume printing."
 }

resources/web/flutter_web/assets/assets/i10n/zh-CN.json

@@ -310,7 +310,6 @@
   "Cannot load file content": "无法加载文件内容",
   "uploadFile requires the printer to be online, currently the printer is not online": "上传文件需要设备在线，当前设备不在线",
 
-  
   "Confirm": "确认",
   "device_input_pin_code_desc": "请输入PIN码.",
   "device_input_pin_code_tips_desc": "请输入8位PIN码",
@@ -379,7 +378,6 @@
   "Network may be unstable, device connection may be unreliable": "网络不稳定，设备连接可能不可靠",
   "network_unstable_partial_operation_failed": "网络不稳定，部分操作可能失败",
 
-
   "Heated Bed Temp.": "热床温度",
   "Print Speed": "打印速度",
   "Fan": "风扇",
@@ -486,7 +484,6 @@
   "White": "白色",
   "Sky Blue": "天蓝",
 
-
   "Time remaining": "剩余时间",
   "N/A": "N/A",
   "Are you sure you want to disconnect this device?": "确定要断开此设备吗？",
@@ -574,7 +571,11 @@
   "time_lapse_video_downloaded_success_2_format": "视频 {} 已下载，但导出视频到相册失败",
   "time_lapse_video_start_downloading": "正在下载视频……",
   "time_lapse_video_export_video_failed": "导出视频失败",
-
+  "camera_turn_off_countdown": "摄像机关闭倒计时",
+  "continue_camera": "继续播放",
+  "camera_auto_shutdown_message": "摄像头长时间未使用，为了节省电量，已自动关闭。",
+  "got_it": "知道了",
+  "monitoring_module_hibernated": "提示：监控模块已休眠，点击播放按钮即可唤醒",
 
   "Check": "查看",
   "default_exception_title": "异常",
@@ -862,13 +863,13 @@
   "error_0002052300030035_title": "换头异常",
   "error_0002052300030035_desc": "检查当前执行头的抓取、放置状态有无异常，同时检查未被抓取的执行头是否安装到位。手动将异常执行头装回放置架后，点击继续按钮尝试恢复任务。",
   "error_0003052300000036_title": "喷嘴温度超限",
-  "error_0003052300000036_desc": "1 号执行头的喷嘴目标温度超出限制，请检查 G-code 切片文件。建议使用 Snapmaker Orca 导出的切片文件进行打印。",
+  "error_0003052300000036_desc": "1 号执行头设置的喷嘴温度不在允许范围之内。请重新设置。",
   "error_0003052300010036_title": "喷嘴温度超限",
-  "error_0003052300010036_desc": "2 号执行头的喷嘴目标温度超出限制，请检查 G-code 切片文件。建议使用 Snapmaker Orca 导出的切片文件进行打印。",
+  "error_0003052300010036_desc": "2 号执行头设置的喷嘴温度不在允许范围之内。请重新设置。",
   "error_0003052300020036_title": "喷嘴温度超限",
-  "error_0003052300020036_desc": "3 号执行头的喷嘴目标温度超出限制，请检查 G-code 切片文件。建议使用 Snapmaker Orca 导出的切片文件进行打印。",
+  "error_0003052300020036_desc": "3 号执行头设置的喷嘴温度不在允许范围之内。请重新设置。",
   "error_0003052300030036_title": "喷嘴温度超限",
-  "error_0003052300030036_desc": "4 号执行头的喷嘴目标温度超出限制，请检查 G-code 切片文件。建议使用 Snapmaker Orca 导出的切片文件进行打印。",
+  "error_0003052300030036_desc": "4 号执行头设置的喷嘴温度不在允许范围之内。请重新设置。",
   "error_0002052300009000_title": "流量校准异常",
   "error_0002052300009000_desc": "1 号执行头流量校准异常，请联系技术支持。",
   "error_0002052300019000_title": "流量校准异常",
@@ -982,13 +983,13 @@
   "error_0002052800000012_title": "返回原位异常",
   "error_0002052800000012_desc": "请检查同步带是否张紧，X、Y 轴是否运动顺畅，碰撞位置是否有异物，请排查后重试。如不能解决，请联系技术支持。",
   "error_0002052300000038_title": "打印异常",
-  "error_0002052300000038_desc": "请检查 1 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍出现异常，请联系技术支持。",
+  "error_0002052300000038_desc": "请检查 1 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍报错，请联系技术支持。",
   "error_0002052300010038_title": "打印异常",
-  "error_0002052300010038_desc": "请检查 2 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍出现异常，请联系技术支持。",
+  "error_0002052300010038_desc": "请检查 2 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍报错，请联系技术支持。",
   "error_0002052300020038_title": "打印异常",
-  "error_0002052300020038_desc": "请检查 3 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍出现异常，请联系技术支持。",
+  "error_0002052300020038_desc": "请检查 3 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍报错，请联系技术支持。",
   "error_0002052300030038_title": "打印异常",
-  "error_0002052300030038_desc": "请检查 4 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍出现异常，请联系技术支持。",
+  "error_0002052300030038_desc": "请检查 4 号执行头的耗材是否在导料管里断料、是否在料盘缠绕，以及执行头是否堵塞。排查后点击继续按钮恢复打印。若仍报错，请联系技术支持。",
   "error_0002052300000039_title": "耗材异常",
   "error_0002052300000039_desc": "1 号执行头的耗材信息未设置。请进入耗材界面编辑，再点击继续按钮恢复打印。",
   "error_0002052300010039_title": "耗材异常",
@@ -1007,9 +1008,388 @@
   "error_0001053100000007_desc": "云打印文件下载失败。请确保网络连接正常，然后重试。若仍出现异常，请联系技术支持。",
   "error_0001053100000008_title": "系统异常",
   "error_0001053100000008_desc": "U 盘读取异常。请确保 U 盘连接正常，然后重试。若仍出现异常，请联系技术支持。",
-  "camera_turn_off_countdown": "摄像机关闭倒计时",
+  "error_0003052200000000_title": "系统异常",
-  "continue_camera": "继续播放",
+  "error_0003052200000000_desc": "详见异常报错信息，请联系技术支持。",
-  "camera_auto_shutdown_message": "摄像头长时间未使用，为了节省电量，已自动关闭。",
+  "error_0003052200000001_title": "系统异常",
-  "got_it": "知道了",
+  "error_0003052200000001_desc": "请联系技术支持。",
-  "monitoring_module_hibernated": "提示：监控模块已休眠，点击播放按钮即可唤醒"
+  "error_0003052200000002_title": "系统异常",
+  "error_0003052200000002_desc": "打印机停止工作，详见异常报错信息，请联系技术支持。",
+  "error_0003052200000003_title": "系统无法启动",
+  "error_0003052200000003_desc": "配置加载异常，请联系技术支持，或尝试恢复出厂设置进行恢复。",
+  "error_0003052200000004_title": "系统无法启动",
+  "error_0003052200000004_desc": "配置加载异常，请联系技术支持，或尝试恢复出厂设置进行恢复。",
+  "error_0003052200000005_title": "系统无法启动",
+  "error_0003052200000005_desc": "通讯协议加载错误，请联系技术支持，或尝试升级固件进行恢复。",
+  "error_0003052200000006_title": "系统无法启动",
+  "error_0003052200000006_desc": "主机 MCU 连接失败，请联系技术支持。",
+  "error_0003052200010006_title": "系统无法启动",
+  "error_0003052200010006_desc": "主板 MCU 连接失败，请联系技术支持。",
+  "error_0003052200020006_title": "系统无法启动",
+  "error_0003052200020006_desc": "1 号执行头 MCU 连接失败。请关机，检查执行头接线，然后重启。若不能解决，请联系技术支持。",
+  "error_0003052200030006_title": "系统无法启动",
+  "error_0003052200030006_desc": "2 号执行头 MCU 连接失败。请关机，检查执行头接线，然后重启。若不能解决，请联系技术支持。",
+  "error_0003052200040006_title": "系统无法启动",
+  "error_0003052200040006_desc": "3 号执行头 MCU 连接失败。请关机，检查执行头接线，然后重启。若不能解决，请联系技术支持。",
+  "error_0003052200050006_title": "系统无法启动",
+  "error_0003052200050006_desc": "4 号执行头 MCU 连接失败。请关机，检查执行头接线，然后重启。若不能解决，请联系技术支持。",
+  "error_0003052200000007_title": "系统无法启动",
+  "error_0003052200000007_desc": "MCU 连接过程中出现异常，请联系技术支持。",
+  "error_0003052200000008_title": "系统异常",
+  "error_0003052200000008_desc": "主机 MCU 连接中断，请联系技术支持。",
+  "error_0003052200010008_title": "系统异常",
+  "error_0003052200010008_desc": "主板 MCU 连接中断，请联系技术支持。",
+  "error_0003052200020008_title": "系统异常",
+  "error_0003052200020008_desc": "1 号执行头 MCU 连接中断。请关机，检查 1 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200030008_title": "系统异常",
+  "error_0003052200030008_desc": "2 号执行头 MCU 连接中断。请关机，检查 2 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200040008_title": "系统异常",
+  "error_0003052200040008_desc": "3 号执行头 MCU 连接中断。请关机，检查 3 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200050008_title": "系统异常",
+  "error_0003052200050008_desc": "4 号执行头 MCU 连接中断。请关机，检查 4 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200000009_title": "传感器异常",
+  "error_0003052200000009_desc": "加速度传感器存储异常，请尝试断电重启以恢复。若问题再次出现，请联系技术支持。",
+  "error_0003052200000010_title": "传感器异常",
+  "error_0003052200000010_desc": "加速度传感器无法获取有效设备 ID，请尝试断电重启以恢复。若问题再次出现，请联系技术支持。",
+  "error_0003052200000011_title": "电机驱动异常",
+  "error_0003052200000011_desc": "电机驱动异常，详见异常报错信息，请联系技术支持。",
+  "error_0003052200000012_title": "轴移动异常",
+  "error_0003052200000012_desc": "请先点击返回原位，再移动 X 轴。",
+  "error_0003052200010012_title": "轴移动异常",
+  "error_0003052200010012_desc": "请先点击返回原位，再移动 Y 轴。",
+  "error_0003052200020012_title": "轴移动异常",
+  "error_0003052200020012_desc": "请先点击返回原位，再移动 Z 轴。",
+  "error_0003052200000013_title": "轴移动异常",
+  "error_0003052200000013_desc": "X 轴移动超出行程。",
+  "error_0003052200010013_title": "轴移动异常",
+  "error_0003052200010013_desc": "Y 轴移动超出行程。",
+  "error_0003052200020013_title": "轴移动异常",
+  "error_0003052200020013_desc": "Z 轴移动超出行程。",
+  "error_0003052200000014_title": "传感器异常",
+  "error_0003052200000014_desc": "ADC 传感器配置超限，系统已停机保护，请导出打印机工作日志并联系技术支持。",
+  "error_0003052200000015_title": "温度异常",
+  "error_0003052200000015_desc": "加热模块未正常升温，系统已停机保护，请导出打印机工作日志并联系技术支持。",
+  "error_0003052200000016_title": "系统异常",
+  "error_0003052200000016_desc": "主机 MCU 控制超时，系统已停机保护，请联系技术支持。",
+  "error_0003052200010016_title": "系统异常",
+  "error_0003052200010016_desc": "主板 MCU 控制超时，系统已停机保护，请联系技术支持。",
+  "error_0003052200020016_title": "系统异常",
+  "error_0003052200020016_desc": "1 号执行头 MCU 控制超时，系统已停机保护。请关机，检查 1 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200030016_title": "系统异常",
+  "error_0003052200030016_desc": "2 号执行头 MCU 控制超时，系统已停机保护。请关机，检查 2 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200040016_title": "系统异常",
+  "error_0003052200040016_desc": "3 号执行头 MCU 控制超时，系统已停机保护。请关机，检查 3 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200050016_title": "系统异常",
+  "error_0003052200050016_desc": "4 号执行头 MCU 控制超时，系统已停机保护。请关机，检查 4 号执行头接线，然后重启以恢复作业。",
+  "error_0003052200000017_title": "系统异常",
+  "error_0003052200000017_desc": "主板 MCU 检测到断电信号，系统已停机保护。请联系技术支持。",
+  "error_0003052200010017_title": "系统异常",
+  "error_0003052200010017_desc": "1 号执行头 MCU 检测到断电信号，系统已停机保护。请联系技术支持。",
+  "error_0003052200020017_title": "系统异常",
+  "error_0003052200020017_desc": "2 号执行头 MCU 检测到断电信号，系统已停机保护。请联系技术支持。",
+  "error_0003052200030017_title": "系统异常",
+  "error_0003052200030017_desc": "3 号执行头 MCU 检测到断电信号，系统已停机保护。请联系技术支持。",
+  "error_0003052200040017_title": "系统异常",
+  "error_0003052200040017_desc": "4 号执行头 MCU 检测到断电信号，系统已停机保护。请联系技术支持。",
+  "error_0003052600000000_title": "热床温度异常",
+  "error_0003052600000000_desc": "可能是温度传感器故障，请联系技术支持。",
+  "error_0003052600000001_title": "热床温度异常",
+  "error_0003052600000001_desc": "热床加热异常，请联系技术支持。",
+  "error_0003052700000000_title": "腔体温度异常",
+  "error_0003052700000000_desc": "请检查并确保温度传感器接线正常，或联系技术支持。",
+  "error_0003053000000000_title": "校准异常",
+  "error_0003053000000000_desc": "1 号执行头校准传感器异常，请检查校准传感器是否断开。如需协助，请联系技术支持。",
+  "error_0003053000010000_title": "校准异常",
+  "error_0003053000010000_desc": "2 号执行头校准传感器异常，请检查校准传感器是否断开。如需协助，请联系技术支持。",
+  "error_0003053000020000_title": "校准异常",
+  "error_0003053000020000_desc": "3 号执行头校准传感器异常，请检查校准传感器是否断开。如需协助，请联系技术支持。",
+  "error_0003053000030000_title": "校准异常",
+  "error_0003053000030000_desc": "4 号执行头校准传感器异常，请检查校准传感器是否断开。如需协助，请联系技术支持。",
+  "error_0003053000000001_title": "校准异常",
+  "error_0003053000000001_desc": "1 号执行头校准传感器异常，传感器数据超出允许范围，请联系技术支持。",
+  "error_0003053000010001_title": "校准异常",
+  "error_0003053000010001_desc": "2 号执行头校准传感器异常，传感器数据超出允许范围，请联系技术支持。",
+  "error_0003053000020001_title": "校准异常",
+  "error_0003053000020001_desc": "3 号执行头校准传感器异常，传感器数据超出允许范围，请联系技术支持。",
+  "error_0003053000030001_title": "校准异常",
+  "error_0003053000030001_desc": "4 号执行头校准传感器异常，传感器数据超出允许范围，请联系技术支持。",
+  "error_0003053000000002_title": "校准异常",
+  "error_0003053000000002_desc": "校准模块工作时需要先将执行头返回原位，请返回原位后重试。若不能解决，请联系技术支持。",
+  "error_0003053000000003_title": "校准异常",
+  "error_0003053000000003_desc": "校准参数错误，请联系技术支持。",
+  "error_0003053000000004_title": "校准异常",
+  "error_0003053000000004_desc": "无法进行校准。可检查执行头是否正确放置到位，请手动放回原位，然后重试。若不能解决，请联系技术支持。",
+  "error_0003053000000005_title": "校准异常",
+  "error_0003053000000005_desc": "错误操作指令。请检查执行头与放置位序号是否匹配，请确保序号匹配，然后重试。若不能解决，请联系技术支持。",
+  "error_0003053000000006_title": "校准异常",
+  "error_0003053000000006_desc": "当前执行头的校准模块型号不匹配，请联系技术支持。",
+  "error_0003053000000007_title": "校准异常",
+  "error_0003053000000007_desc": "探测指令错误，使用了 X、Y、Z 以外的轴，请使用正确的指令。",
+  "error_0003053000000008_title": "校准异常",
+  "error_0003053000000008_desc": "请检查 X 轴有无异物堵塞，执行头喷嘴有无残料，请清理后重试。若不能解决，请联系技术支持。",
+  "error_0003053000010008_title": "校准异常",
+  "error_0003053000010008_desc": "请检查 Y 轴有无异物堵塞，执行头喷嘴有无残料，请清理后重试。若不能解决，请联系技术支持。",
+  "error_0003053000020008_title": "校准异常",
+  "error_0003053000020008_desc": "请检查 Z 轴有无异物堵塞，执行头喷嘴有无残料，请清理后重试。若不能解决，请联系技术支持。",
+  "error_0003053000000009_title": "校准异常",
+  "error_0003053000000009_desc": "由于系统出现异常，无法进行校准，请联系技术支持。",
+  "error_0003053000000010_title": "热床检测异常",
+  "error_0003053000000010_desc": "检测到 PEI 钢板被取下。请放上 PEI 钢板，重新尝试打印。",
+  "error_0003053000000011_title": "热床检测异常",
+  "error_0003053000000011_desc": "检测到 PEI 钢板未被取下。请取下 PEI 钢板，重新尝试校准。",
+  "error_0003053000000012_title": "热床检测异常",
+  "error_0003053000000012_desc": "热床检测异常，请联系技术支持。",
+  "error_0001053100000000_title": "系统异常",
+  "error_0001053100000000_desc": "获取文件列表失败。",
+  "error_0001053100000001_title": "系统异常",
+  "error_0001053100000001_desc": "打印机正在进行打印，无法操作切片文件，请打印机空闲后重试。",
+  "error_0001053100000002_title": "系统异常",
+  "error_0001053100000002_desc": "不支持指令 M28、M29、M30，请删除。",
+  "error_0001053100000003_title": "系统异常",
+  "error_0001053100000003_desc": "正在从切片文件解析 G 代码指令， 不允许重置切片文件。",
+  "error_0001053100000004_title": "系统异常",
+  "error_0001053100000004_desc": "无法打开切片文件。",
+  "error_0001053100000005_title": "系统异常",
+  "error_0001053100000005_desc": "断电续打失败。",
+  "error_0001053100000006_title": "系统异常",
+  "error_0001053100000006_desc": "打印过程中不允许删除掉电数据。",
+  "error_0001052500000010_title": "耗材预装载异常",
+  "error_0001052500000010_desc": "1 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0001052500010010_title": "耗材预装载异常",
+  "error_0001052500010010_desc": "2 号进料口出现异常，点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0001052500020010_title": "耗材预装载异常",
+  "error_0001052500020010_desc": "3 号进料口出现异常，点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0001052500030010_title": "耗材预装载异常",
+  "error_0001052500030010_desc": "4 号进料口出现异常，点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0001052500000011_title": "耗材预装载异常",
+  "error_0001052500000011_desc": "1 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0001052500010011_title": "耗材预装载异常",
+  "error_0001052500010011_desc": "2 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0001052500020011_title": "耗材预装载异常",
+  "error_0001052500020011_desc": "3 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0001052500030011_title": "耗材预装载异常",
+  "error_0001052500030011_desc": "4 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0001052500000012_title": "耗材预装载异常",
+  "error_0001052500000012_desc": "1 号进料口里程轮转速异常，可能是耗材发生了缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500010012_title": "耗材预装载异常",
+  "error_0001052500010012_desc": "2 号进料口里程轮转速异常，可能是耗材发生了缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500020012_title": "耗材预装载异常",
+  "error_0001052500020012_desc": "3 号进料口里程轮转速异常，可能是耗材发生了缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500030012_title": "耗材预装载异常",
+  "error_0001052500030012_desc": "4 号进料口里程轮转速异常，可能是耗材发生了缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500000013_title": "耗材预装载异常",
+  "error_0001052500000013_desc": "1 号进料口未检测到耗材，请插入耗材。",
+  "error_0001052500010013_title": "耗材预装载异常",
+  "error_0001052500010013_desc": "2 号进料口未检测到耗材，请插入耗材。",
+  "error_0001052500020013_title": "耗材预装载异常",
+  "error_0001052500020013_desc": "3 号进料口未检测到耗材，请插入耗材。",
+  "error_0001052500030013_title": "耗材预装载异常",
+  "error_0001052500030013_desc": "4 号进料口未检测到耗材，请插入耗材。",
+  "error_0001052500000014_title": "耗材预装载异常",
+  "error_0001052500000014_desc": "1 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500010014_title": "耗材预装载异常",
+  "error_0001052500010014_desc": "2 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500020014_title": "耗材预装载异常",
+  "error_0001052500020014_desc": "3 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500030014_title": "耗材预装载异常",
+  "error_0001052500030014_desc": "4 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请尝试重新装载耗材。",
+  "error_0001052500000015_title": "耗材预装载异常",
+  "error_0001052500000015_desc": "1 号执行头中有残留耗材。请取出执行头内残留耗材后，重新装载耗材。",
+  "error_0001052500010015_title": "耗材预装载异常",
+  "error_0001052500010015_desc": "2 号执行头中有残留耗材。请取出执行头内残留耗材后，重新装载耗材。",
+  "error_0001052500020015_title": "耗材预装载异常",
+  "error_0001052500020015_desc": "3 号执行头中有残留耗材。请取出执行头内残留耗材后，重新装载耗材。",
+  "error_0001052500030015_title": "耗材预装载异常",
+  "error_0001052500030015_desc": "4 号执行头中有残留耗材。请取出执行头内残留耗材后，重新装载耗材。",
+  "error_0002052500000030_title": "送料异常",
+  "error_0002052500000030_desc": "1 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500010030_title": "送料异常",
+  "error_0002052500010030_desc": "2 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500020030_title": "送料异常",
+  "error_0002052500020030_desc": "3 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500030030_title": "送料异常",
+  "error_0002052500030030_desc": "4 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500000031_title": "送料异常",
+  "error_0002052500000031_desc": "1 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0002052500010031_title": "送料异常",
+  "error_0002052500010031_desc": "2 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0002052500020031_title": "送料异常",
+  "error_0002052500020031_desc": "3 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0002052500030031_title": "送料异常",
+  "error_0002052500030031_desc": "4 号进料口送料电机转速异常，请检查并确保进料器接线正常。若仍报错，请联系技术支持。",
+  "error_0002052500000032_title": "送料异常",
+  "error_0002052500000032_desc": "1 号进料口里程轮转速异常，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复，或者重新装载耗材。",
+  "error_0002052500010032_title": "送料异常",
+  "error_0002052500010032_desc": "2 号进料口里程轮转速异常，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复，或者重新装载耗材。",
+  "error_0002052500020032_title": "送料异常",
+  "error_0002052500020032_desc": "3 号进料口里程轮转速异常，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复，或者重新装载耗材。",
+  "error_0002052500030032_title": "送料异常",
+  "error_0002052500030032_desc": "4 号进料口里程轮转速异常，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复，或者重新装载耗材。",
+  "error_0002052500000033_title": "送料异常",
+  "error_0002052500000033_desc": "1 号进料口未检测到耗材，请插入耗材。",
+  "error_0002052500010033_title": "送料异常",
+  "error_0002052500010033_desc": "2 号进料口未检测到耗材，请插入耗材。",
+  "error_0002052500020033_title": "送料异常",
+  "error_0002052500020033_desc": "3 号进料口未检测到耗材，请插入耗材。",
+  "error_0002052500030033_title": "送料异常",
+  "error_0002052500030033_desc": "4 号进料口未检测到耗材，请插入耗材。",
+  "error_0002052500000034_title": "送料异常",
+  "error_0002052500000034_desc": "1 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500010034_title": "送料异常",
+  "error_0002052500010034_desc": "2 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500020034_title": "送料异常",
+  "error_0002052500020034_desc": "3 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500030034_title": "送料异常",
+  "error_0002052500030034_desc": "4 号进料口送料超时，可能是耗材缠绕或者送料路径受阻。解决问题后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500000035_title": "送料异常",
+  "error_0002052500000035_desc": "1 号进料口送料行程超限，请检查该进料口的导料管是否已脱落。重新装好后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500010035_title": "送料异常",
+  "error_0002052500010035_desc": "2 号进料口送料行程超限，请检查该进料口的导料管是否已脱落。重新装好后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500020035_title": "送料异常",
+  "error_0002052500020035_desc": "3 号进料口送料行程超限，请检查该进料口的导料管是否已脱落。重新装好后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500030035_title": "送料异常",
+  "error_0002052500030035_desc": "4 号进料口送料行程超限，请检查该进料口的导料管是否已脱落。重新装好后，请点击继续按钮尝试恢复作业，或者重新装载耗材。",
+  "error_0002052500000050_title": "挤出异常",
+  "error_0002052500000050_desc": "1 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500010050_title": "挤出异常",
+  "error_0002052500010050_desc": "2 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500020050_title": "挤出异常",
+  "error_0002052500020050_desc": "3 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500030050_title": "挤出异常",
+  "error_0002052500030050_desc": "4 号进料口出现异常。点击错误代码可查看详情，建议联系技术支持排查与恢复。",
+  "error_0002052500000051_title": "挤出异常",
+  "error_0002052500000051_desc": "1 号进料口无法正常送料。可能是耗材发生了缠绕、卡在挤出齿轮内，或者喷嘴堵塞，请排查问题后再次尝试。",
+  "error_0002052500010051_title": "挤出异常",
+  "error_0002052500010051_desc": "2 号进料口无法正常送料。可能是耗材发生了缠绕、卡在挤出齿轮内，或者喷嘴堵塞，请排查问题后再次尝试。",
+  "error_0002052500020051_title": "挤出异常",
+  "error_0002052500020051_desc": "3 号进料口无法正常送料。可能是耗材发生了缠绕、卡在挤出齿轮内，或者喷嘴堵塞，请排查问题后再次尝试。",
+  "error_0002052500030051_title": "挤出异常",
+  "error_0002052500030051_desc": "4 号进料口无法正常送料。可能是耗材发生了缠绕、卡在挤出齿轮内，或者喷嘴堵塞，请排查问题后再次尝试。",
+  "error_0002052500000070_title": "退料异常",
+  "error_0002052500000070_desc": "1 号进料口耗材退出异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0002052500010070_title": "退料异常",
+  "error_0002052500010070_desc": "2 号进料口耗材退出异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0002052500020070_title": "退料异常",
+  "error_0002052500020070_desc": "3 号进料口耗材退出异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0002052500030070_title": "退料异常",
+  "error_0002052500030070_desc": "4 号进料口耗材退出异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0001052500000090_title": "手动进料异常",
+  "error_0001052500000090_desc": "1 号进料口手动进料异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0001052500010090_title": "手动进料异常",
+  "error_0001052500010090_desc": "2 号进料口手动进料异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0001052500020090_title": "手动进料异常",
+  "error_0001052500020090_desc": "3 号进料口手动进料异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0001052500030090_title": "手动进料异常",
+  "error_0001052500030090_desc": "4 号进料口手动进料异常。点击错误代码查看详情，建议联系技术支持排查解决。",
+  "error_0002052300000040_title": "换头异常",
+  "error_0002052300000040_desc": "1 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010040_title": "换头异常",
+  "error_0002052300010040_desc": "2 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020040_title": "换头异常",
+  "error_0002052300020040_desc": "3 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030040_title": "换头异常",
+  "error_0002052300030040_desc": "4 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000041_title": "换头异常",
+  "error_0002052300000041_desc": "1 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010041_title": "换头异常",
+  "error_0002052300010041_desc": "2 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020041_title": "换头异常",
+  "error_0002052300020041_desc": "3 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030041_title": "换头异常",
+  "error_0002052300030041_desc": "4 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000042_title": "换头异常",
+  "error_0002052300000042_desc": "1 号执行头放回失败。可能是放置架或工作区存在异物，处理异物后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010042_title": "换头异常",
+  "error_0002052300010042_desc": "2 号执行头放回失败。可能是放置架或工作区存在异物，处理异物后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020042_title": "换头异常",
+  "error_0002052300020042_desc": "3 号执行头放回失败。可能是放置架或工作区存在异物，处理异物后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030042_title": "换头异常",
+  "error_0002052300030042_desc": "4 号执行头放回失败。可能是放置架或工作区存在异物，处理异物后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000043_title": "换头异常",
+  "error_0002052300000043_desc": "1 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010043_title": "换头异常",
+  "error_0002052300010043_desc": "2 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020043_title": "换头异常",
+  "error_0002052300020043_desc": "3 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030043_title": "换头异常",
+  "error_0002052300030043_desc": "4 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000044_title": "换头异常",
+  "error_0002052300000044_desc": "1 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010044_title": "换头异常",
+  "error_0002052300010044_desc": "2 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020044_title": "换头异常",
+  "error_0002052300020044_desc": "3 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030044_title": "换头异常",
+  "error_0002052300030044_desc": "4 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000045_title": "换头异常",
+  "error_0002052300000045_desc": "1 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010045_title": "换头异常",
+  "error_0002052300010045_desc": "2 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020045_title": "换头异常",
+  "error_0002052300020045_desc": "3 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030045_title": "换头异常",
+  "error_0002052300030045_desc": "4 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000046_title": "换头异常",
+  "error_0002052300000046_desc": "1 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010046_title": "换头异常",
+  "error_0002052300010046_desc": "2 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020046_title": "换头异常",
+  "error_0002052300020046_desc": "3 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030046_title": "换头异常",
+  "error_0002052300030046_desc": "4 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300000047_title": "换头异常",
+  "error_0002052300000047_desc": "1 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300010047_title": "换头异常",
+  "error_0002052300010047_desc": "2 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300020047_title": "换头异常",
+  "error_0002052300020047_desc": "3 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052300030047_title": "换头异常",
+  "error_0002052300030047_desc": "4 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800000013_title": "返回原位异常",
+  "error_0002052800000013_desc": "1 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800010013_title": "返回原位异常",
+  "error_0002052800010013_desc": "2 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800020013_title": "返回原位异常",
+  "error_0002052800020013_desc": "3 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800030013_title": "返回原位异常",
+  "error_0002052800030013_desc": "4 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800000014_title": "返回原位异常",
+  "error_0002052800000014_desc": "1 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800010014_title": "返回原位异常",
+  "error_0002052800010014_desc": "2 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800020014_title": "返回原位异常",
+  "error_0002052800020014_desc": "3 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0002052800030014_title": "返回原位异常",
+  "error_0002052800030014_desc": "4 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000000013_title": "探测异常",
+  "error_0003053000000013_desc": "请取出任意执行头，然后重试。",
+  "error_0003053000000014_title": "探测异常",
+  "error_0003053000000014_desc": "1 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000010014_title": "探测异常",
+  "error_0003053000010014_desc": "2 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000020014_title": "探测异常",
+  "error_0003053000020014_desc": "3 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000030014_title": "探测异常",
+  "error_0003053000030014_desc": "4 号执行头脱落。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000000015_title": "探测异常",
+  "error_0003053000000015_desc": "1 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000010015_title": "探测异常",
+  "error_0003053000010015_desc": "2 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000020015_title": "探测异常",
+  "error_0003053000020015_desc": "3 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000030015_title": "探测异常",
+  "error_0003053000030015_desc": "4 号执行头 Pogopin 接触异常。请用无尘布将执行头及执行头转换器上的 Pogopin 擦拭干净后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000000016_title": "探测异常",
+  "error_0003053000000016_desc": "1 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000010016_title": "探测异常",
+  "error_0003053000010016_desc": "2 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000020016_title": "探测异常",
+  "error_0003053000020016_desc": "3 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000030016_title": "探测异常",
+  "error_0003053000030016_desc": "4 号执行头放置状态异常。请手动将该执行头装回放置架后，点击继续按钮尝试恢复任务。若仍报错，请联系技术支持。",
+  "error_0003053000030017_title": "热床检测异常",
+  "error_0003053000030017_desc": "PEI 钢板放置状态不正确。请将 PEI 钢板放置好，然后重试。",
+  "error_0002053200000001_title": "检测到床面可能有异物",
+  "error_0002053200000001_desc": "请检查并清理异物后，点击继续以恢复打印；若检查无误，也可直接点击继续。",
+  "error_0002053200000002_title": "检测到可能存在炒面缺陷",
+  "error_0002053200000002_desc": "请检查模型，若缺陷可接受，点击继续以恢复打印；若检查无误，也可直接点击继续。"
 }

resources/web/flutter_web/flutter_bootstrap.js

@@ -11,6 +11,6 @@ _flutter.buildConfig = {"engineRevision":"b8800d88be4866db1b15f8b954ab2573bba996
 
 _flutter.loader.load({
   serviceWorkerSettings: {
-    serviceWorkerVersion: "122636570"
+    serviceWorkerVersion: "332938162"
   }
 });

resources/web/flutter_web/flutter_service_worker.js

@@ -3,33 +3,33 @@ const MANIFEST = 'flutter-app-manifest';
 const TEMP = 'flutter-temp-cache';
 const CACHE_NAME = 'flutter-app-cache';
 
-const RESOURCES = {"flutter_bootstrap.js": "360fcb7ece74a6ddc0b90b99cfaf61e8",
+const RESOURCES = {"flutter_bootstrap.js": "70025bb433b520d0ec62b28dee896ad3",
-"version.json": "970f76bce879e0e8a3c71f92c31d53be",
+"version.json": "e52a93209d7448318a7147c855506052",
-"index.html": "0ea1997f6c2c3b34b0f1fb58390e10c7",
+"index.html": "ac3c42043ce225dd2ddf521624bed1f8",
-"/": "0ea1997f6c2c3b34b0f1fb58390e10c7",
+"/": "ac3c42043ce225dd2ddf521624bed1f8",
-"main.dart.js": "a295ed043d6a84d80de1eb3143542830",
+"main.dart.js": "0aecb6c76ad938e3203514c93b85649c",
 "flutter.js": "f31737fb005cd3a3c6bd9355efd33061",
-"version.changelog": "1ba1bc2d44d055158f7719b3b2ffe3a7",
+"version.changelog": "9590096c9e50df042fdc3575b0b6c55c",
 "favicon.png": "be8d1ab28c20907c9869c345d0482962",
 "icons/Icon-192.png": "ab1f25ced1559729e334de938eae91a5",
 "icons/Icon-maskable-192.png": "e41e8489c0f6a822acf8dab362e112b7",
 "icons/Icon-maskable-512.png": "4870fb6720f4fcad016cb582589d136d",
 "icons/Icon-512.png": "343022ac1c56796cb7ff635faf0646ef",
 "manifest.json": "901d86fb8842ec0d66225a542131d689",
-"assets/AssetManifest.json": "72e2d76c872feeb5bb96bcc8facd729c",
+"assets/AssetManifest.json": "c02aa73daf8e9a2b906ee21d959ce1e4",
 "assets/NOTICES": "d453b0291cf6ccfc5ced86766a1aa652",
 "assets/FontManifest.json": "0dc3d44d47c5e2636cdca4babafb2396",
-"assets/AssetManifest.bin.json": "e834d2b760d8a73a48c833be3c19ba6e",
+"assets/AssetManifest.bin.json": "5735ff58f81401cb83bd84da8208c527",
 "assets/packages/lava_device_control/assets/files/filament.json": "54d21ade78e6cd6025306530023b094d",
 "assets/packages/cupertino_icons/assets/CupertinoIcons.ttf": "391ff5f9f24097f4f6e4406690a06243",
 "assets/packages/fluttertoast/assets/toastify.js": "56e2c9cedd97f10e7e5f1cebd85d53e3",
 "assets/packages/fluttertoast/assets/toastify.css": "a85675050054f179444bc5ad70ffc635",
 "assets/packages/wakelock_plus/assets/no_sleep.js": "7748a45cd593f33280669b29c2c8919a",
 "assets/shaders/ink_sparkle.frag": "ecc85a2e95f5e9f53123dcaf8cb9b6ce",
-"assets/AssetManifest.bin": "e6421692063a637e740d83842b7b806d",
+"assets/AssetManifest.bin": "e859f2edad71e24cca9c40b84878deb9",
 "assets/fonts/MaterialIcons-Regular.otf": "aa361df3c4cfa80e7a16cc8899e3c663",
-"assets/assets/i10n/zh-CN.json": "11eb31598543608b7fb935f5673cbaef",
+"assets/assets/i10n/zh-CN.json": "7248514969b4e327a7441ee87a09fd67",
-"assets/assets/i10n/en.json": "552a55a8589175d6bd2422e3d4acc5ca",
+"assets/assets/i10n/en.json": "20735bec964e2a0563e735fa1db06e73",
 "assets/assets/images/deviceNoResponse.webp": "1ca23a7feedfdc34362ea5789ccf895b",
 "assets/assets/images/deviceAuthorized.webp": "8eb814193bed15cec22658018871aba8",
 "assets/assets/images/IpInputGuide.webp": "06c11ce1dadc2910676aec6d40a5eea5",

resources/web/flutter_web/index.html

@@ -57,8 +57,8 @@
 
     function open_browser() {
       const message = JSON.stringify({
-        sequence_id: 1222222,
+        seqid: 1222222,
-        command: "homepage_test_browser",
+        cmd: "homepage_test_browser",
         params: {
           url: "http://localhost:7357/?locale=zh-cn-CN&dark_model=1&path=/",
         },
@@ -74,8 +74,8 @@
 
     function open_snapmaker_browser() {
       const message = JSON.stringify({
-        sequence_id: 1222222,
+        seqid: 1222222,
-        command: "sw_OpenBrowser",
+        cmd: "sw_OpenBrowser",
         params: {
           url: "http://localhost:7357/?locale=zh-cn-CN&dark_model=1&path=/",
         },

resources/web/flutter_web/version.changelog

@@ -1,5 +1,6 @@
 
 # Changelog
 
+- 优化绑定和连接体验
 - 修复局域网连接打开监控失败
-- 优化体验
+- 优化发送文件打印

resources/web/flutter_web/version.json

@@ -1 +1 @@
-{"app_name":"orca","version":"2.1.2","build_number":"20251223154027","package_name":"orca"}
+{"app_name":"orca","version":"2.2.1","build_number":"20251225210739","package_name":"orca"}

src/slic3r/GUI/NetworkTestDialog.cpp

@@ -12,6 +12,12 @@
 #include <boost/asio/ip/tcp.hpp>
 #include <boost/log/trivial.hpp>
 #include <chrono>
+#include <vector>
+#include <cstdio>
+#include <memory>
+#ifndef _WIN32
+#include <sys/wait.h>
+#endif
 
 namespace Slic3r {
 namespace GUI {
@@ -522,22 +528,38 @@ void NetworkTestDialog::start_test_ping(wxString server, TestJob job)
 #ifdef _WIN32
 		// Windows: ping -n 4 <server>
 		wxString ping_cmd = "ping -n 4 " + server;
-#else
+		// Windows 可以使用 wxExecute
-		// Linux/Mac: ping -c 4 <server>
-		wxString ping_cmd = "ping -c 4 " + server;
-#endif
-
-		// 执行ping命令 - 使用wxEXEC_NODISABLE和wxEXEC_HIDE_CONSOLE避免影响主线程
 		wxArrayString output;
 		wxArrayString errors;
-
+		long exec_flags = wxEXEC_SYNC | wxEXEC_NODISABLE | wxEXEC_HIDE_CONSOLE;
-		// 添加标志：不禁用窗口，隐藏控制台窗口
-		long exec_flags = wxEXEC_SYNC | wxEXEC_NODISABLE;
-#ifdef _WIN32
-		exec_flags |= wxEXEC_HIDE_CONSOLE;  // Windows下隐藏cmd窗口
-#endif
-
 		long result = wxExecute(ping_cmd, output, errors, exec_flags);
+#else
+		// Linux/Mac: ping -c 4 <server>
+		// 使用 popen() 而不是 wxExecute，因为 wxExecute 在 macOS 上不能在异步线程中使用
+		std::string ping_cmd = "ping -c 4 " + server.ToStdString();
+		wxArrayString output;
+		long result = -1;
+		
+		FILE* pipe = popen(ping_cmd.c_str(), "r");
+		if (pipe != nullptr) {
+			char buffer[1024];
+			while (fgets(buffer, sizeof(buffer), pipe) != nullptr) {
+				// 转换为 wxString 并添加到 output
+				wxString line = wxString::FromUTF8(buffer);
+				line.Trim();  // 移除换行符
+				if (!line.IsEmpty()) {
+					output.Add(line);
+				}
+			}
+			int pclose_result = pclose(pipe);
+			// pclose 返回的是命令的退出状态，需要检查 WEXITSTATUS
+			if (WIFEXITED(pclose_result)) {
+				result = WEXITSTATUS(pclose_result);
+			} else {
+				result = -1;
+			}
+		}
+#endif
 
 		if (result == 0 && output.GetCount() > 0) {
 			// 解析ping输出（不输出每一行，减少UI更新）
@@ -546,6 +568,9 @@ void NetworkTestDialog::start_test_ping(wxString server, TestJob job)
 			int received = 0;
 			int sent = 4;
 			
+			// macOS需要收集所有time值来计算平均值
+			std::vector<double> time_values;
+
 			for (size_t i = 0; i < output.GetCount(); i++) {
 				wxString line = output[i];
 
@@ -639,12 +664,62 @@ void NetworkTestDialog::start_test_ping(wxString server, TestJob job)
 					}
 				}
 #else
-				// Linux/Mac格式: "rtt min/avg/max/mdev = 1.234/5.678/9.012/1.234 ms"
+				// macOS格式: "64 bytes from 13.35.32.150: icmp_seq=519 ttl=244 time=57.030 ms"
-				if (line.Contains("rtt") && line.Contains("avg")) {
+				// 需要从每行提取 time=XX.XXX ms 并收集所有值
-					found_rtt = true;
+				if (line.Contains("time=")) {
-					rtt_info = line;
+					int time_pos = line.Find("time=");
+					if (time_pos != wxNOT_FOUND) {
+						wxString after_time = line.Mid(time_pos + 5);  // 跳过 "time="
+						wxString time_str;
+						// 提取数字（可能包含小数点）
+						for (size_t j = 0; j < after_time.Length(); j++) {
+							wxChar c = after_time[j];
+							if (wxIsdigit(c) || c == '.') {
+								time_str += c;
+							} else if (c == ' ' || c == 'm') {
+								// 遇到空格或 'm' (ms) 停止
+								break;
+							}
+						}
+						if (!time_str.IsEmpty()) {
+							double time_val;
+							if (time_str.ToDouble(&time_val)) {
+								time_values.push_back(time_val);
+								found_rtt = true;
+							}
+						}
+					}
 				}
-				// 统计格式: "4 packets transmitted, 4 received"
+				
+				// Linux格式: "rtt min/avg/max/mdev = 1.234/5.678/9.012/1.234 ms"
+				if (!found_rtt && line.Contains("rtt") && line.Contains("avg")) {
+					found_rtt = true;
+					// 提取平均值
+					int avg_pos = line.Find("avg");
+					if (avg_pos != wxNOT_FOUND) {
+						wxString after_avg = line.Mid(avg_pos + 3);
+						wxString num_str;
+						size_t i = 0;
+						// 跳过空格和等号
+						while (i < after_avg.Length() && (after_avg[i] == ' ' || after_avg[i] == '\t' || after_avg[i] == '=')) {
+							i++;
+						}
+						// 提取数字直到遇到斜杠或空格
+						while (i < after_avg.Length() && (wxIsdigit(after_avg[i]) || after_avg[i] == '.')) {
+							num_str += after_avg[i];
+							i++;
+						}
+						if (!num_str.IsEmpty()) {
+							rtt_info = num_str + "ms (average)";
+						} else {
+							rtt_info = line;
+						}
+					} else {
+						rtt_info = line;
+					}
+				}
+				
+				// 统计格式: "4 packets transmitted, 4 received" (Linux/macOS通用)
 				if (line.Contains("packets transmitted") && line.Contains("received")) {
 					int pos_received = line.Find(" received");
 					if (pos_received != wxNOT_FOUND) {
@@ -663,9 +738,47 @@ void NetworkTestDialog::start_test_ping(wxString server, TestJob job)
 						}
 					}
 				}
+				
+				// macOS 可能还有统计行: "round-trip min/avg/max/stddev = 1.234/5.678/9.012/1.234 ms"
+				if (!found_rtt && line.Contains("round-trip") && line.Contains("avg")) {
+					found_rtt = true;
+					int avg_pos = line.Find("avg");
+					if (avg_pos != wxNOT_FOUND) {
+						wxString after_avg = line.Mid(avg_pos + 3);
+						wxString num_str;
+						size_t i = 0;
+						while (i < after_avg.Length() && (after_avg[i] == ' ' || after_avg[i] == '\t' || after_avg[i] == '=')) {
+							i++;
+						}
+						while (i < after_avg.Length() && (wxIsdigit(after_avg[i]) || after_avg[i] == '.')) {
+							num_str += after_avg[i];
+							i++;
+							if (i < after_avg.Length() && after_avg[i] == '/') break;  // 遇到斜杠停止
+						}
+						if (!num_str.IsEmpty()) {
+							rtt_info = num_str + "ms (average)";
+						} else {
+							rtt_info = line;
+						}
+					} else {
+						rtt_info = line;
+					}
+				}
 #endif
 			}
 
+			// 如果收集了多个time值（macOS），计算平均值
+			if (!time_values.empty()) {
+				double sum = 0.0;
+				for (double val : time_values) {
+					sum += val;
+				}
+				double avg = sum / time_values.size();
+				rtt_info = wxString::Format("%.3fms (average from %zu samples)", avg, time_values.size());
+			} else if (found_rtt && rtt_info.IsEmpty()) {
+				rtt_info = "N/A";
+			}
+
 			// 计算丢包率
 			int packet_loss = ((sent - received) * 100) / sent;
 
@@ -677,8 +790,8 @@ void NetworkTestDialog::start_test_ping(wxString server, TestJob job)
 
 			if (parse_success) {
 				// 成功解析了ping结果
-				if (found_rtt) {
+				if (found_rtt && !rtt_info.IsEmpty()) {
-					summary += "[OK] Ping RTT: " + rtt_info + "\n";
+					summary += "[OK] Ping round-trip time: " + rtt_info + "\n";
 				}
 				summary += wxString::Format("Packet loss: %d%% (%d/%d received)\n", packet_loss, received, sent);
 
@@ -697,9 +810,20 @@ void NetworkTestDialog::start_test_ping(wxString server, TestJob job)
 
 		} else {
 			wxString error_summary = "\n[FAIL] Ping command failed or timed out";
+#ifdef _WIN32
 			for (size_t i = 0; i < errors.GetCount(); i++) {
 				error_summary += "\nError: " + errors[i];
 			}
+#else
+			if (output.GetCount() > 0) {
+				error_summary += "\nOutput:\n";
+				for (size_t i = 0; i < output.GetCount() && i < 5; i++) {
+					error_summary += "  " + output[i] + "\n";
+				}
+			} else {
+				error_summary += "\nNo output from ping command";
+			}
+#endif
 			update_status(-1, error_summary);
 		}
 

src/slic3r/GUI/WebPresetDialog.cpp

@@ -188,6 +188,8 @@ WebPresetDialog::WebPresetDialog(GUI_App* pGUI, long style)
     });
     // LoadProfile();
 
+    m_load_thread->detach();
+
     // UI
     SetStartPage(BBL_REGION);
 

version.inc

@@ -10,7 +10,7 @@ endif()
 if(NOT DEFINED BBL_INTERNAL_TESTING)
 set(BBL_INTERNAL_TESTING "0")
 endif()
-set(Snapmaker_VERSION "2.2.0")
+set(Snapmaker_VERSION "2.2.1")
 set(MIN_FIRM_VER "1.0.0")
 string(REGEX MATCH "^([0-9]+)\\.([0-9]+)\\.([0-9]+)"
        Snapmaker_VERSION_MATCH ${Snapmaker_VERSION})