diff --git a/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json
index aae882e084..5b619a54c7 100644
--- a/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic 4Max Pro 0.4 nozzle.json	
@@ -24,6 +24,7 @@
     "machine_end_gcode": "PRINT_END",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json
index 60c04de717..2b7f5f9dbd 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Max 0.4 nozzle.json	
@@ -197,6 +197,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json
index 957fe8f41f..f6a66adae4 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Neo 0.4 nozzle.json	
@@ -201,6 +201,7 @@
         "100"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json
index e5ba10c424..d8e074d4b6 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Plus 0.4 nozzle.json	
@@ -204,6 +204,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json
index d2c3b9f2ab..b53bb6e924 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 2 Pro 0.4 nozzle.json	
@@ -202,6 +202,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "0",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json
index 33fb9036ee..94f5e6327c 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.2 nozzle.json	
@@ -208,6 +208,7 @@
         "40"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json
index f34d6a7ef3..cf0b1a4b6b 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.4 nozzle.json	
@@ -210,6 +210,7 @@
         "60"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json
index afe0b5c596..3d7a9cad25 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.6 nozzle.json	
@@ -208,6 +208,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json
index e9ea28c250..36f7efcd45 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 0.8 nozzle.json	
@@ -208,6 +208,7 @@
         "40"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json
index 3ea31a77ae..7d866ae672 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 0.4 nozzle.json	
@@ -201,6 +201,7 @@
         "40"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Anycubic/machine/Anycubic Predator 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Predator 0.4 nozzle.json
index 38c14c21aa..97962c6946 100644
--- a/resources/profiles/Anycubic/machine/Anycubic Predator 0.4 nozzle.json	
+++ b/resources/profiles/Anycubic/machine/Anycubic Predator 0.4 nozzle.json	
@@ -94,6 +94,7 @@
     "layer_change_gcode": "",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "brass",
     "auxiliary_fan": "0"
 }
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json
index 2177f1afff..e8b287b17a 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.2 nozzle.json	
@@ -440,6 +440,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json
index 1b4aaf7e92..edaf6cb5c8 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.4 nozzle.json	
@@ -202,6 +202,7 @@
         "40"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json
index 0f4cbc94d6..a02526d8d8 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.6 nozzle.json	
@@ -440,6 +440,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json
index d4c30ae637..75c2e6af9b 100644
--- a/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery M1 Pro 0.8 nozzle.json	
@@ -440,6 +440,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json
index 9fc8e6fc5b..9730ed685a 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json	
@@ -197,6 +197,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json
index 88913a1426..3c59617f5d 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json	
@@ -197,6 +197,7 @@
         "40"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json
index 21ac4ada3e..365bc1c19b 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json	
@@ -197,6 +197,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json
index 456028bdc8..8666f1c1a5 100644
--- a/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json	
@@ -197,6 +197,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/BIQU/machine/fdm_biqu_common.json b/resources/profiles/BIQU/machine/fdm_biqu_common.json
index 234ed87650..bce36a0358 100644
--- a/resources/profiles/BIQU/machine/fdm_biqu_common.json
+++ b/resources/profiles/BIQU/machine/fdm_biqu_common.json
@@ -133,6 +133,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/BIQU/machine/fdm_klipper_common.json b/resources/profiles/BIQU/machine/fdm_klipper_common.json
index ade0a9f973..fb5690b955 100644
--- a/resources/profiles/BIQU/machine/fdm_klipper_common.json
+++ b/resources/profiles/BIQU/machine/fdm_klipper_common.json
@@ -135,6 +135,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Blocks/machine/fdm_klipper_common.json b/resources/profiles/Blocks/machine/fdm_klipper_common.json
index 1f537d4194..f3c760d994 100644
--- a/resources/profiles/Blocks/machine/fdm_klipper_common.json
+++ b/resources/profiles/Blocks/machine/fdm_klipper_common.json
@@ -135,6 +135,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Chuanying/machine/fdm_chuanying_common.json b/resources/profiles/Chuanying/machine/fdm_chuanying_common.json
index eacd271545..09980b6f8f 100644
--- a/resources/profiles/Chuanying/machine/fdm_chuanying_common.json
+++ b/resources/profiles/Chuanying/machine/fdm_chuanying_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Chuanying/machine/fdm_klipper_common.json b/resources/profiles/Chuanying/machine/fdm_klipper_common.json
index 4a8ce82235..f347003a17 100644
--- a/resources/profiles/Chuanying/machine/fdm_klipper_common.json
+++ b/resources/profiles/Chuanying/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";DSLR_SNAPSHOT\nTIMELAPSE_TAKE_FRAME",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Chuanying/machine/fdm_x1_common.json b/resources/profiles/Chuanying/machine/fdm_x1_common.json
index 69452f1adf..44e006e86a 100644
--- a/resources/profiles/Chuanying/machine/fdm_x1_common.json
+++ b/resources/profiles/Chuanying/machine/fdm_x1_common.json
@@ -100,6 +100,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "140x110"
     ],
diff --git a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json
index 110db95f38..b875238852 100644
--- a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json	
+++ b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json	
@@ -189,6 +189,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json
index 982fddea10..0e15564481 100644
--- a/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json	
+++ b/resources/profiles/CoLiDo/machine/CoLiDo DIY 4.0 0.4 nozzle.json	
@@ -203,6 +203,7 @@
         "20"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json
index 9127702f9a..c717d10cb5 100644
--- a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json	
+++ b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json	
@@ -189,6 +189,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/CoLiDo/machine/fdm_klipper_common.json b/resources/profiles/CoLiDo/machine/fdm_klipper_common.json
index a7a8bf785a..fb80bdb19e 100644
--- a/resources/profiles/CoLiDo/machine/fdm_klipper_common.json
+++ b/resources/profiles/CoLiDo/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
index 13dc2f1a6e..d17e15b856 100644
--- a/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
+++ b/resources/profiles/Comgrow/machine/fdm_comgrow_common.json
@@ -142,5 +142,6 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality CR-10 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 SE 0.2 nozzle.json
index 24e8684ecc..8fcf6c51a8 100644
--- a/resources/profiles/Creality/machine/Creality CR-10 SE 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-10 SE 0.2 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality CR-10 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 SE 0.4 nozzle.json
index 92e8e62fd2..5878eba189 100644
--- a/resources/profiles/Creality/machine/Creality CR-10 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-10 SE 0.4 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality CR-10 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 SE 0.6 nozzle.json
index fbdc3b373c..a2711452b9 100644
--- a/resources/profiles/Creality/machine/Creality CR-10 SE 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-10 SE 0.6 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality CR-10 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 SE 0.8 nozzle.json
index cb06bdf124..3cc2d98d69 100644
--- a/resources/profiles/Creality/machine/Creality CR-10 SE 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality CR-10 SE 0.8 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "M220 S100 ;Reset feed rate \nM221 S100 ;Reset flow rate \n\nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp\nG28 ;Home \nG92 E0 ;Reset extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positioning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z3 ;Raise Z more \nG90 ;Absolute positioning \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json
index f59a667666..abf1b059a1 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json	
@@ -131,6 +131,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96/PNG, 300x300/PNG"
     ]
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json
index 6852a7d6ed..f48ddf9c05 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json	
@@ -131,6 +131,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96/PNG, 300x300/PNG"
     ]
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.2 nozzle.json
index d495fb7b39..71f1224f2e 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.2 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
     "machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json
index 247e6b8327..ac924725f5 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
     "machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.6 nozzle.json
index bcfa85e09f..d0f0ffd193 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.6 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
     "machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.8 nozzle.json
index 80d042b46f..5dbffcd30b 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.8 nozzle.json	
@@ -121,6 +121,7 @@
     "machine_start_gcode": "SET_GCODE_VARIABLE MACRO=PRINTER_PARAM VARIABLE=fan0_min VALUE=30 ;compensate for fan speed\nSET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 ;revert accel_to_decel back to 2500\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nM140 S[bed_temperature_initial_layer_single] ;Set bed temp\nG28 X Y ;Home XY axes\nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize\nG28 Z ;Home Z axis & load bed mesh\nBED_MESH_CALIBRATE PROBE_COUNT=5,5 ;Auto bed level\n\nM104 S[nozzle_temperature_initial_layer] ;Set nozzle temp\nG92 E0 ;Reset Extruder\nG1 X-2.0 Y20 Z0.3 F5000.0 ;Move to start position\nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize\nG1 Z0.2 ;Lower nozzle to printing height\nG1 Y145.0 F1500.0 E15 ;Draw the first line\nG1 X-1.7 F5000.0 ;Move to side a little\nG1 Y30 F1500.0 E15 ;Draw the second line\nG92 E0 ;Reset Extruder",
     "machine_end_gcode": "G92 E0 ;Reset Extruder\nG1 E-1.2 Z{max_layer_z + 0.5} F1800 ;Retract and raise Z\n{if max_layer_z < 50}\nG1 Z{max_layer_z + 25} F900 ;Raise Z more\n{endif}\n\nG1 X2 Y218 F3000 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96",
         "300x300"
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json
index daf2334fc5..84da14ea18 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.4 nozzle.json	
@@ -128,6 +128,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "320x320"
     ]
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json
index 6de09c6cf1..6773a43b40 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.6 nozzle.json	
@@ -128,6 +128,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0\nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "320x320"
     ]
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json
index d11c81c658..af6ed367d0 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json	
@@ -119,6 +119,7 @@
     "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "disable_m73": "1",
     "thumbnails": []
 }
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json
index 3264d668a0..e6bdac7195 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json	
@@ -119,6 +119,7 @@
     "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "disable_m73": "1",
     "thumbnails": []
 }
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json
index 5b17184bb0..e90ba38860 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json	
@@ -119,6 +119,7 @@
     "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "disable_m73": "1",
     "thumbnails": []
 }
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json
index 06a93521fc..951693eb80 100644
--- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json	
@@ -119,6 +119,7 @@
     "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
     "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "disable_m73": "1",
     "thumbnails": []
 }
\ No newline at end of file
diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json
index 81ca96beb8..eeb2a55da8 100644
--- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json	
@@ -72,6 +72,7 @@
     "printhost_ssl_ignore_revoke": "0",
     "purge_in_prime_tower": "1",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "0",
diff --git a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json
index cfe328d3ab..f9e986f867 100644
--- a/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json	
@@ -140,6 +140,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96/PNG, 300x300/PNG"
     ]
diff --git a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json
index 05c1569e43..8ffab0b085 100644
--- a/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json	
@@ -140,6 +140,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "96x96/PNG, 300x300/PNG"
     ]
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json
index d453d971ca..f40587061c 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json	
@@ -126,6 +126,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json
index 533d34a09e..593504abab 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json	
@@ -126,6 +126,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json
index 1d5f8ac62c..40215c507e 100644
--- a/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json	
@@ -126,6 +126,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json
index 83fcb055d7..5666891b71 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json
index 010c41c0af..e44c6774a6 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json
index d1c38a1301..f32a5fe588 100644
--- a/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json	
+++ b/resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json
index a7f25403e1..45ac0a71b4 100644
--- a/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json	
@@ -126,6 +126,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json
index 23962b93ce..9438cb571c 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json
index 1e5fe93833..ee3802c298 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json
index 0925a6ba92..6c65499fd4 100644
--- a/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json
index a765295763..1d3be4da68 100644
--- a/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json
index 9026e36017..9e7198018c 100644
--- a/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json
index c1360b288d..c389a932a1 100644
--- a/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json
index 9b63f58fa2..ab80c35de5 100644
--- a/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json
index cc76190924..1ece63ce1c 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json
index eff3cc126b..bb33e09530 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json
index 8d5279f771..61b89ae47d 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json
index 64955bf444..9f856fd7c9 100644
--- a/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json	
+++ b/resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json	
@@ -141,6 +141,7 @@
     "change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails_format": "PNG",
     "thumbnails": [
         "300x300",
diff --git a/resources/profiles/Creality/machine/fdm_creality_common.json b/resources/profiles/Creality/machine/fdm_creality_common.json
index 2a50ea8150..f232ce73a3 100644
--- a/resources/profiles/Creality/machine/fdm_creality_common.json
+++ b/resources/profiles/Creality/machine/fdm_creality_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json
index f8f90404b1..4c8888ac3d 100644
--- a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json	
+++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json	
@@ -212,6 +212,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "0",
diff --git a/resources/profiles/Custom/machine/fdm_klipper_common.json b/resources/profiles/Custom/machine/fdm_klipper_common.json
index bb2b666524..1b165d9db0 100644
--- a/resources/profiles/Custom/machine/fdm_klipper_common.json
+++ b/resources/profiles/Custom/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Custom/machine/fdm_rrf_common.json b/resources/profiles/Custom/machine/fdm_rrf_common.json
index 5a79ae4577..09d68a821e 100644
--- a/resources/profiles/Custom/machine/fdm_rrf_common.json
+++ b/resources/profiles/Custom/machine/fdm_rrf_common.json
@@ -131,6 +131,7 @@
         "0x0"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0",
     "machine_start_gcode": "; Prime Filament Sensor for Runout\nM581 P1 T2 S-1 R0\nM950 J1 C\"nil\" ; Input 1 e0 Filament Sensor \nM591 D0 P2 C\"e0stop\" S1 ; Filament Runout Sensor\n\nM83  ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S140 ; Set extruder temp 140C before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n;G28 W\nG32 ; Levels Z Tilt and probes Z=0\nG29 S0 ; mesh bed leveling\nG1 X0 Y0 Z2 F2000\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 X10 Y-7 Z0.3 F1000.0 ; go outside print area\nG92 E0.0\nG1 Z0.2 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0",
diff --git a/resources/profiles/Custom/machine/fdm_toolchanger_common.json b/resources/profiles/Custom/machine/fdm_toolchanger_common.json
index c29367f4b0..3a58350f73 100644
--- a/resources/profiles/Custom/machine/fdm_toolchanger_common.json
+++ b/resources/profiles/Custom/machine/fdm_toolchanger_common.json
@@ -183,6 +183,7 @@
     "change_filament_gcode": "",
     "machine_start_gcode": "PRINT_START  TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif}  BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json b/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json
index 387d80cb5c..f53fd7726f 100755
--- a/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json
+++ b/resources/profiles/DeltaMaker/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Dremel/machine/fdm_dremel_common.json b/resources/profiles/Dremel/machine/fdm_dremel_common.json
index 132590dd15..f227889af7 100644
--- a/resources/profiles/Dremel/machine/fdm_dremel_common.json
+++ b/resources/profiles/Dremel/machine/fdm_dremel_common.json
@@ -133,6 +133,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json b/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json
index e7d66e536c..4bb0fa30c2 100644
--- a/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json	
+++ b/resources/profiles/Elegoo/machine/Elegoo OrangeStorm Giga 0.4 nozzle.json	
@@ -82,6 +82,7 @@
     "nozzle_height": "4.76",
     "nozzle_volume": "125",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "time_lapse_gcode": "",
     "gcode_flavor": "klipper",
     "change_filament_gcode": "M600",
diff --git a/resources/profiles/Elegoo/machine/fdm_elegoo_common.json b/resources/profiles/Elegoo/machine/fdm_elegoo_common.json
index 6e428a7b3e..aa38f1044a 100644
--- a/resources/profiles/Elegoo/machine/fdm_elegoo_common.json
+++ b/resources/profiles/Elegoo/machine/fdm_elegoo_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Elegoo/machine/fdm_neptune_4_common.json b/resources/profiles/Elegoo/machine/fdm_neptune_4_common.json
index a1dc285716..65d9c7cde5 100644
--- a/resources/profiles/Elegoo/machine/fdm_neptune_4_common.json
+++ b/resources/profiles/Elegoo/machine/fdm_neptune_4_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0",
     "thumbnails": [
diff --git a/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json
index 96decf4b9a..3f4684a342 100644
--- a/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json	
+++ b/resources/profiles/Eryone/machine/Thinker X400 0.4 nozzle.json	
@@ -182,6 +182,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Eryone/machine/fdm_machine_common.json b/resources/profiles/Eryone/machine/fdm_machine_common.json
index a1fe46674b..12f9368473 100644
--- a/resources/profiles/Eryone/machine/fdm_machine_common.json
+++ b/resources/profiles/Eryone/machine/fdm_machine_common.json
@@ -141,6 +141,7 @@
         "40"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
index ec75eeac70..bd01d6220e 100644
--- a/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
+++ b/resources/profiles/Eryone/machine/fdm_machine_eryone_ER20_common.json
@@ -132,6 +132,7 @@
         "50"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "0",
     "support_air_filtration": "0",
diff --git a/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json
index 9a13876403..6ec7f6a11a 100644
--- a/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json	
+++ b/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json	
@@ -170,6 +170,7 @@
     "layer_change_gcode": "",
     "support_chamber_temp_control": "0",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "adaptive_bed_mesh_margin": "0",
     "emit_machine_limits_to_gcode": "0",
diff --git a/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json
index 91fdf0d5bb..c239bd1dcc 100644
--- a/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json	
+++ b/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json	
@@ -170,6 +170,7 @@
     "layer_change_gcode": "",
     "support_chamber_temp_control": "0",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "adaptive_bed_mesh_margin": "0",
     "emit_machine_limits_to_gcode": "0",
diff --git a/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json
index 9fb0cc1273..9cbf3a0603 100644
--- a/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json	
+++ b/resources/profiles/FLSun/machine/FLSun V400 0.4 nozzle.json	
@@ -94,6 +94,7 @@
     "layer_change_gcode": "",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json
index 3c2a558dd6..4c76fa9dbe 100644
--- a/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/FlashForge AD5X 0.25 nozzle.json	
@@ -199,6 +199,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json
index e427f0a182..a04a0abceb 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.4 nozzle.json	
@@ -199,6 +199,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json
index 388595d40b..6c27abc918 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.6 nozzle.json	
@@ -199,6 +199,7 @@
         "35"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json
index 4e4786820b..53fb65f716 100644
--- a/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge AD5X 0.8 nozzle.json	
@@ -199,6 +199,7 @@
         "35"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json
index 8db6493097..02e52d76f3 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json	
@@ -186,6 +186,7 @@
         "35"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json
index 7e2e5feeda..6d840d1fe5 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.25 nozzle.json	
@@ -198,6 +198,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "0",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json
index 05a44faa07..a87a43579f 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json	
@@ -198,6 +198,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json
index 6b9411156f..3485781876 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 nozzle.json	
@@ -198,6 +198,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json
index 19adda56f3..e9f9b0feb2 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json	
@@ -198,6 +198,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json
index 85fa3afa97..63bc0f28a2 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json	
@@ -198,6 +198,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json
index 87703e6221..de2993ba41 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json	
@@ -198,6 +198,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json
index f5a9241abf..87a2eb2b19 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.25 nozzle.json	
@@ -198,6 +198,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json
index 589b702d94..e5c6bbffe8 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json	
@@ -198,6 +198,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json
index b82ef8bd53..94401af418 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 nozzle.json	
@@ -198,6 +198,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json
index 570dc73725..e5b751d896 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json	
@@ -198,6 +198,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json
index dad3fc71bc..deef947feb 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json	
@@ -198,6 +198,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json
index bbf76a2486..dca058d66d 100644
--- a/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json	
+++ b/resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json	
@@ -198,6 +198,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Flashforge/machine/fdm_adventurer3_common.json b/resources/profiles/Flashforge/machine/fdm_adventurer3_common.json
index b9d5942144..9466479767 100644
--- a/resources/profiles/Flashforge/machine/fdm_adventurer3_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_adventurer3_common.json
@@ -92,6 +92,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": "80x60",
     "use_relative_e_distances": "0",
     "z_hop_types": "Auto Lift",
diff --git a/resources/profiles/Flashforge/machine/fdm_adventurer4_common.json b/resources/profiles/Flashforge/machine/fdm_adventurer4_common.json
index e5a58ef36c..00d253ede5 100644
--- a/resources/profiles/Flashforge/machine/fdm_adventurer4_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_adventurer4_common.json
@@ -46,6 +46,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": "80x60",
     "use_relative_e_distances": "0",
     "z_hop_types": "Auto Lift",
diff --git a/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json b/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json
index a0a7632408..f38bba1b50 100644
--- a/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json
@@ -101,6 +101,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "140x110"
     ],
diff --git a/resources/profiles/Flashforge/machine/fdm_flashforge_common.json b/resources/profiles/Flashforge/machine/fdm_flashforge_common.json
index 8269a54c39..809d47df31 100644
--- a/resources/profiles/Flashforge/machine/fdm_flashforge_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_flashforge_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "1"
 }
\ No newline at end of file
diff --git a/resources/profiles/Flashforge/machine/fdm_klipper_common.json b/resources/profiles/Flashforge/machine/fdm_klipper_common.json
index 4cdab6a047..ecb9d44403 100644
--- a/resources/profiles/Flashforge/machine/fdm_klipper_common.json
+++ b/resources/profiles/Flashforge/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";DSLR_SNAPSHOT\nTIMELAPSE_TAKE_FRAME",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/FlyingBear/machine/FlyingBear Ghost 6 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/FlyingBear Ghost 6 0.4 nozzle.json
index 51cf31cffc..c3c8968310 100644
--- a/resources/profiles/FlyingBear/machine/FlyingBear Ghost 6 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/FlyingBear Ghost 6 0.4 nozzle.json	
@@ -127,6 +127,7 @@
     "machine_start_gcode": "M220 S100 ;reset feedrate\nM221 S100 ;reset flowrate\nG21 ;set units to millimeters\nG90 ;use absolute coordinates\nM82 ;absolute extrusion mode\nM107 ;turn off colling fan\n\nM140 S[bed_temperature_initial_layer] ;set bed temperature continue without waiting\nM104 S[nozzle_temperature_initial_layer] ;set hotend temperature continue without waiting\n\nG28 ;home\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n\nM190 S[bed_temperature_initial_layer] ;wait for bed temperature\nM109 S[nozzle_temperature_initial_layer] ;wait for hotend temperature\n\nG1 X20 Y20 F5000 ;start position \nG1 Z0.28 F1500 ;lower z\nG1 E4 F500 ;prime the filament\n\nG1 X20 Y20.0 Z0.28 F3000.0  ;start position \nG1 X20 Y170.0 Z0.28 F1500.0 E12 ;1st line\nG1 X20.3 F1500\nG1 X20.3 Y20.0 Z0.28 F1500.0 E18 ;2nd line\n\nG92 E0 ;reset extruder\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n",
     "machine_end_gcode": "G91 ;use relative coordinates\nG1 E-4 F1500 ;retract the filament\nG1 X5 Y5 Z0.2 F5000 ;wipe\nG1 Z5 F1500 ;raise z\nG90 ;use absolute coordinates\nG1 X10 Y210 F5000 ;park print head\n\nM107 ;turn off fan\nM104 S0 ;turn off hotend\nM140 S0 ;turn off heatbed\nM84 ;disable motors",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "thumbnails": [
         "100x100",
         "320x320"
diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json
index 252e0b1515..c535599083 100644
--- a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json	
@@ -180,6 +180,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json
index f87cfc40dc..89b55f8fd1 100644
--- a/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
+++ b/resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json	
@@ -177,6 +177,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
index 6e67c8fb13..e8de83bc39 100644
--- a/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_klipper_common.json
@@ -176,6 +176,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/FlyingBear/machine/fdm_machine_common.json b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
index 21e3e53169..02dceb0877 100644
--- a/resources/profiles/FlyingBear/machine/fdm_machine_common.json
+++ b/resources/profiles/FlyingBear/machine/fdm_machine_common.json
@@ -172,6 +172,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/Folgertech/machine/fdm_folgertech_common.json b/resources/profiles/Folgertech/machine/fdm_folgertech_common.json
index e0c8944658..f9f894af46 100644
--- a/resources/profiles/Folgertech/machine/fdm_folgertech_common.json
+++ b/resources/profiles/Folgertech/machine/fdm_folgertech_common.json
@@ -133,6 +133,7 @@
     "machine_end_gcode": "M140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nG28 X Y ; Home X and Y axis\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json
index 7cf74c4dea..96fa10f6e3 100644
--- a/resources/profiles/Geeetech/machine/fdm_geeetech_common.json
+++ b/resources/profiles/Geeetech/machine/fdm_geeetech_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": ";------------------------------------\n;layer No：[layer_num] ———>Print Height：[layer_z] mm\n;------------------------------------",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "support_multi_bed_types": "1",
     "auxiliary_fan": "0",
diff --git a/resources/profiles/Ginger Additive/machine/fdm_machine_common.json b/resources/profiles/Ginger Additive/machine/fdm_machine_common.json
index 4c5f6f5f04..0434bc77f4 100644
--- a/resources/profiles/Ginger Additive/machine/fdm_machine_common.json	
+++ b/resources/profiles/Ginger Additive/machine/fdm_machine_common.json	
@@ -191,6 +191,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
index 6b2455604a..f6aca42480 100644
--- a/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
+++ b/resources/profiles/InfiMech/machine/HSN/fdm_klipper_common.json
@@ -177,6 +177,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json b/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
index e1e6e5b3ab..56becb53a1 100644
--- a/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
+++ b/resources/profiles/InfiMech/machine/HSN/fdm_machine_common.json
@@ -173,6 +173,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/InfiMech/machine/fdm_klipper_common.json b/resources/profiles/InfiMech/machine/fdm_klipper_common.json
index 2ed1044f3f..64557e7e9f 100644
--- a/resources/profiles/InfiMech/machine/fdm_klipper_common.json
+++ b/resources/profiles/InfiMech/machine/fdm_klipper_common.json
@@ -177,6 +177,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/InfiMech/machine/fdm_machine_common.json b/resources/profiles/InfiMech/machine/fdm_machine_common.json
index 5e5bb0e43b..2d2c5f2ec0 100644
--- a/resources/profiles/InfiMech/machine/fdm_machine_common.json
+++ b/resources/profiles/InfiMech/machine/fdm_machine_common.json
@@ -173,6 +173,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "template_custom_gcode": "",
diff --git a/resources/profiles/Kingroon/machine/fdm_machine_common.json b/resources/profiles/Kingroon/machine/fdm_machine_common.json
index 00d6258c7e..10d7943938 100644
--- a/resources/profiles/Kingroon/machine/fdm_machine_common.json
+++ b/resources/profiles/Kingroon/machine/fdm_machine_common.json
@@ -153,6 +153,7 @@
         "35"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "deretraction_speed": [
         "30"
     ],
diff --git a/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro Common.json b/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro Common.json
index 2970ca8368..871e7dab73 100644
--- a/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro Common.json	
+++ b/resources/profiles/Lulzbot/machine/Lulzbot Taz Pro Common.json	
@@ -117,6 +117,7 @@
     "change_filament_gcode": "",
     "machine_pause_gcode": "M600 B10",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "support_chamber_temp_control": "0",
     "support_air_filtration": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json
index 2dbd15cfe3..2be0f67169 100644
--- a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json	
+++ b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json	
@@ -35,6 +35,7 @@
     "single_extruder_multi_material": "1",
     "change_filament_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "cooling_tube_length": "20",
     "cooling_tube_retraction": "60",
     "extruder_clearance_height_to_lid": "100",
diff --git a/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json
index 6d5b224121..ed93a6acf6 100644
--- a/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json	
+++ b/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json	
@@ -45,6 +45,7 @@
     "single_extruder_multi_material": "1",
     "change_filament_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "cooling_tube_length": "20",
     "cooling_tube_retraction": "60",
     "extruder_clearance_height_to_lid": "100",
diff --git a/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json
index ebdf9bc2c8..0570d7b79e 100644
--- a/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json	
+++ b/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json	
@@ -43,6 +43,7 @@
     "single_extruder_multi_material": "1",
     "change_filament_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "cooling_tube_length": "20",
     "cooling_tube_retraction": "60",
     "extruder_clearance_height_to_lid": "100",
diff --git a/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json
index 9db9af26d9..42ea8d5814 100644
--- a/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json	
+++ b/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json	
@@ -51,6 +51,7 @@
     "single_extruder_multi_material": "1",
     "change_filament_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "cooling_tube_length": "20",
     "cooling_tube_retraction": "60",
     "deretraction_speed": [
diff --git a/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json
index 11ec60b7b3..9f603d5791 100644
--- a/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json	
+++ b/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json	
@@ -43,6 +43,7 @@
     "single_extruder_multi_material": "1",
     "change_filament_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "cooling_tube_length": "20",
     "cooling_tube_retraction": "60",
     "extruder_clearance_height_to_lid": "100",
diff --git a/resources/profiles/Mellow/machine/fdm_common_M1.json b/resources/profiles/Mellow/machine/fdm_common_M1.json
index eacd2426e0..90dc277ac1 100644
--- a/resources/profiles/Mellow/machine/fdm_common_M1.json
+++ b/resources/profiles/Mellow/machine/fdm_common_M1.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Peopoly/machine/fdm_klipper_common.json b/resources/profiles/Peopoly/machine/fdm_klipper_common.json
index ed90d9a768..2e3ebbf83b 100644
--- a/resources/profiles/Peopoly/machine/fdm_klipper_common.json
+++ b/resources/profiles/Peopoly/machine/fdm_klipper_common.json
@@ -138,6 +138,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json
index d5cebe6e54..b0ca53e8fc 100644
--- a/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json	
+++ b/resources/profiles/Phrozen/machine/Phrozen Arco 0.4 nozzle.json	
@@ -201,6 +201,7 @@
         "45"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": "1",
diff --git a/resources/profiles/Positron3D/machine/fdm_common_the_positron.json b/resources/profiles/Positron3D/machine/fdm_common_the_positron.json
index 62cbaf3cef..fed072c77c 100644
--- a/resources/profiles/Positron3D/machine/fdm_common_the_positron.json
+++ b/resources/profiles/Positron3D/machine/fdm_common_the_positron.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json
index 48aad4e9fa..879c52c90d 100644
--- a/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINI 0.25 nozzle.json	
@@ -87,6 +87,7 @@
     "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json
index 705db6d8b8..8a793b8473 100644
--- a/resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINI 0.4 nozzle.json	
@@ -81,6 +81,7 @@
     "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MINI 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINI 0.6 nozzle.json
index 764beb282e..af7c9ad5ff 100644
--- a/resources/profiles/Prusa/machine/Prusa MINI 0.6 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINI 0.6 nozzle.json	
@@ -81,6 +81,7 @@
     "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MINI 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINI 0.8 nozzle.json
index 0a7620dd04..d86eed790f 100644
--- a/resources/profiles/Prusa/machine/Prusa MINI 0.8 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINI 0.8 nozzle.json	
@@ -81,6 +81,7 @@
     "machine_start_gcode": "M862.3 P \"MINI\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json
index 6f7bd1649a..4029070162 100644
--- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json	
@@ -108,6 +108,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINIIS\nNO_TEMPLATES",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "brass",
diff --git a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json
index 8d5307d1a8..2d449b9dee 100644
--- a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json	
@@ -108,6 +108,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n{if ! spiral_mode}M74 W[extruded_weight_total]{endif}\n",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK3.5",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "brass",
diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json
index 8f3b224a82..443b29c55e 100644
--- a/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.25 nozzle.json	
@@ -53,7 +53,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n",
-    "scan_first_layer": "0",
+    "": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json
index 078bf79488..7c6f29b558 100644
--- a/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.4 nozzle.json	
@@ -54,6 +54,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json
index 5782d3df69..a39903b510 100644
--- a/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.6 nozzle.json	
@@ -54,6 +54,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json
index d70ede0cb2..d7eaf848f6 100644
--- a/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK3S 0.8 nozzle.json	
@@ -54,6 +54,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK4 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK4 0.25 nozzle.json
index f67ecd9e8b..584e5a5eb0 100644
--- a/resources/profiles/Prusa/machine/Prusa MK4 0.25 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK4 0.25 nozzle.json	
@@ -68,6 +68,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPG",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK4 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK4 0.4 nozzle.json
index 42f06dee3e..8503be59bd 100644
--- a/resources/profiles/Prusa/machine/Prusa MK4 0.4 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK4 0.4 nozzle.json	
@@ -61,6 +61,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPG",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK4 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK4 0.6 nozzle.json
index 82421f8ce6..eb25aa5394 100644
--- a/resources/profiles/Prusa/machine/Prusa MK4 0.6 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK4 0.6 nozzle.json	
@@ -68,6 +68,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPG",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/Prusa MK4 0.8 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK4 0.8 nozzle.json
index 4eb4b3806a..458b9185da 100644
--- a/resources/profiles/Prusa/machine/Prusa MK4 0.8 nozzle.json	
+++ b/resources/profiles/Prusa/machine/Prusa MK4 0.8 nozzle.json	
@@ -68,6 +68,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_MK4IS\nPG",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "17",
     "machine_unload_filament_time": "16",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/Prusa/machine/fdm_machine_common_xl.json b/resources/profiles/Prusa/machine/fdm_machine_common_xl.json
index 14a6bcf217..7ab730a44e 100644
--- a/resources/profiles/Prusa/machine/fdm_machine_common_xl.json
+++ b/resources/profiles/Prusa/machine/fdm_machine_common_xl.json
@@ -102,6 +102,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_XLIS\nPG\nINPUT_SHAPER",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "0",
     "thumbnails": [
diff --git a/resources/profiles/Qidi/machine/fdm_q_common.json b/resources/profiles/Qidi/machine/fdm_q_common.json
index a36bf68f68..6a413d7f47 100644
--- a/resources/profiles/Qidi/machine/fdm_q_common.json
+++ b/resources/profiles/Qidi/machine/fdm_q_common.json
@@ -126,6 +126,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "1",
     "support_air_filtration": [
diff --git a/resources/profiles/Qidi/machine/fdm_qidi_common.json b/resources/profiles/Qidi/machine/fdm_qidi_common.json
index 46e8f5d67d..d4e777d2cb 100644
--- a/resources/profiles/Qidi/machine/fdm_qidi_common.json
+++ b/resources/profiles/Qidi/machine/fdm_qidi_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Ratrig/machine/fdm_klipper_common.json b/resources/profiles/Ratrig/machine/fdm_klipper_common.json
index e4a3b00c3d..61a2cdc474 100644
--- a/resources/profiles/Ratrig/machine/fdm_klipper_common.json
+++ b/resources/profiles/Ratrig/machine/fdm_klipper_common.json
@@ -137,6 +137,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json b/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json
index 5a70d3869c..ca0f95d121 100644
--- a/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json	
+++ b/resources/profiles/RolohaunDesign/machine/fdm_common_Rook MK1 LDO.json	
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/SecKit/machine/SecKit Go3 0.4 nozzle.json b/resources/profiles/SecKit/machine/SecKit Go3 0.4 nozzle.json
index a73774cfc9..5d59a19a23 100644
--- a/resources/profiles/SecKit/machine/SecKit Go3 0.4 nozzle.json	
+++ b/resources/profiles/SecKit/machine/SecKit Go3 0.4 nozzle.json	
@@ -17,6 +17,7 @@
     ],
     "printable_height": "275",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "machine_load_filament_time": "0",
     "machine_unload_filament_time": "0",
     "nozzle_type": "hardened_steel",
diff --git a/resources/profiles/SecKit/machine/fdm_klipper_common.json b/resources/profiles/SecKit/machine/fdm_klipper_common.json
index 853b961cd1..bbe3d9d8dd 100644
--- a/resources/profiles/SecKit/machine/fdm_klipper_common.json
+++ b/resources/profiles/SecKit/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/machine/fdm_U1.json b/resources/profiles/Snapmaker/machine/fdm_U1.json
index fca1592792..219172009c 100644
--- a/resources/profiles/Snapmaker/machine/fdm_U1.json
+++ b/resources/profiles/Snapmaker/machine/fdm_U1.json
@@ -183,6 +183,7 @@
     "change_filament_gcode": "",
     "machine_start_gcode": ";===== machine: PR2 ========================\n;===== date: 20250717 =====================\nPRINT_START\n;===== 预热热床和第一个挤出头 =================\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\n\n;===== 粗回零 =================\nG28 X Y\nT{initial_extruder}\nM109 T{initial_extruder} S140\nG28 Z\nG90\nG0 Z10 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG4 P2000\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 自动进料  ======================\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\n\n;===== 挤出流量  ======================\n{if (is_extruder_used[0])}\nSM_PRINT_FLOW_CALIBRATE INDEX=0 TARGET_TEMP={nozzle_temperature[0]}\n{endif}\n{if (is_extruder_used[1])}\nSM_PRINT_FLOW_CALIBRATE INDEX=1 TARGET_TEMP={nozzle_temperature[1]}\n{endif}\n{if (is_extruder_used[2])}\nSM_PRINT_FLOW_CALIBRATE INDEX=2 TARGET_TEMP={nozzle_temperature[2]}\n{endif}\n{if (is_extruder_used[3])}\nSM_PRINT_FLOW_CALIBRATE INDEX=3 TARGET_TEMP={nozzle_temperature[3]}\n{endif}\n\n;===== 取出第一个挤出头 =================\nT{initial_extruder}\nSET_VELOCITY_LIMIT ACCEL=10000\nM204 S10000\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z10 F10000\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_1\nG0 Z5 F10000\nROUGHLY_CLEAN_NOZZLE\nG0 Z5 F10000\nFINELY_CLEAN_NOZZLE_STAGE_2\nM83\n\n;===== 第一个挤出头降温 =================\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM106 S0\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nINNER_CUTOFF_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nINNER_ROUGHLY_CLEAN_NOZZLE_BASE_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\n\n;===== 精回零 =================\nG28 Z\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n\n;BED_MESH_CALIBRATE PROBE_COUNT=7,7\n\n\n;======== 预挤出/划线 ================\n{if (is_extruder_used[0]) and 0 != initial_extruder}\nSM_PRINT_START_LINE INDEX=0 TARGET_TEMP={nozzle_temperature_initial_layer[0]}\nM83\nM104 S{nozzle_temperature[0] - 90}\n{endif}\n\n{if (is_extruder_used[1]) and 1 != initial_extruder}\nSM_PRINT_START_LINE INDEX=1 TARGET_TEMP={nozzle_temperature_initial_layer[1]}\nM83\nM104 S{nozzle_temperature[1] - 90}\n{endif}\n\n{if (is_extruder_used[2]) and 2 != initial_extruder}\nSM_PRINT_START_LINE INDEX=2 TARGET_TEMP={nozzle_temperature_initial_layer[2]}\nM83\nM104 S{nozzle_temperature[2] - 90}\n{endif}\n\n{if (is_extruder_used[3]) and 3 != initial_extruder}\nSM_PRINT_START_LINE INDEX=3 TARGET_TEMP={nozzle_temperature_initial_layer[3]}\nM83\nM104 S{nozzle_temperature[3] - 90}\n{endif}\n\n{if (is_extruder_used[initial_extruder])}\nSM_PRINT_START_LINE INDEX={initial_extruder} TARGET_TEMP={nozzle_temperature_initial_layer[initial_extruder]}\n{endif}\nM109 S{nozzle_temperature_initial_layer[initial_extruder]} T{initial_extruder}\nM106 S0\n\nTIMELAPSE_START",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
index 122771ea81..d6df3adc01 100644
--- a/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
+++ b/resources/profiles/Snapmaker/machine/fdm_toolchanger.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/TwoTrees/machine/fdm_klipper_common.json b/resources/profiles/TwoTrees/machine/fdm_klipper_common.json
index 9ee98bb885..cb8249be50 100644
--- a/resources/profiles/TwoTrees/machine/fdm_klipper_common.json
+++ b/resources/profiles/TwoTrees/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Vivedino/machine/fdm_klipper_common.json b/resources/profiles/Vivedino/machine/fdm_klipper_common.json
index eea637cac9..8573410382 100644
--- a/resources/profiles/Vivedino/machine/fdm_klipper_common.json
+++ b/resources/profiles/Vivedino/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "machine_pause_gcode": "PAUSE",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Vivedino/machine/fdm_rrf_common.json b/resources/profiles/Vivedino/machine/fdm_rrf_common.json
index b29e24bb9c..7f083a60b6 100644
--- a/resources/profiles/Vivedino/machine/fdm_rrf_common.json
+++ b/resources/profiles/Vivedino/machine/fdm_rrf_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Volumic/machine/fdm_volumic_common.json b/resources/profiles/Volumic/machine/fdm_volumic_common.json
index d3f5b10b3f..a598287b3e 100644
--- a/resources/profiles/Volumic/machine/fdm_volumic_common.json
+++ b/resources/profiles/Volumic/machine/fdm_volumic_common.json
@@ -113,6 +113,7 @@
         "0x0"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression",
     "machine_end_gcode": "M107\nM104 S0\nM140 S0\nG0 X1 Y299 F5000\nM84\nM300",
diff --git a/resources/profiles/Voron/machine/fdm_klipper_common.json b/resources/profiles/Voron/machine/fdm_klipper_common.json
index 3b7cb32cd1..8b4465fecd 100644
--- a/resources/profiles/Voron/machine/fdm_klipper_common.json
+++ b/resources/profiles/Voron/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Vzbot/machine/fdm_klipper_common.json b/resources/profiles/Vzbot/machine/fdm_klipper_common.json
index 95829931df..9d0215d0d3 100644
--- a/resources/profiles/Vzbot/machine/fdm_klipper_common.json
+++ b/resources/profiles/Vzbot/machine/fdm_klipper_common.json
@@ -136,6 +136,7 @@
     "layer_change_gcode": ";DSLR_SNAPSHOT\nTIMELAPSE_TAKE_FRAME",
     "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/Wanhao/machine/fdm_wanhao_common.json b/resources/profiles/Wanhao/machine/fdm_wanhao_common.json
index 655b82265e..d819cfd173 100644
--- a/resources/profiles/Wanhao/machine/fdm_wanhao_common.json
+++ b/resources/profiles/Wanhao/machine/fdm_wanhao_common.json
@@ -134,6 +134,7 @@
     "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
     "layer_change_gcode": "",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "undefine",
     "auxiliary_fan": "0"
 }
\ No newline at end of file
diff --git a/resources/profiles/WonderMaker/machine/fdm_klipper_common.json b/resources/profiles/WonderMaker/machine/fdm_klipper_common.json
index 71443d95cc..82740c587f 100755
--- a/resources/profiles/WonderMaker/machine/fdm_klipper_common.json
+++ b/resources/profiles/WonderMaker/machine/fdm_klipper_common.json
@@ -131,6 +131,7 @@
     ],
     "support_multi_bed_types": "1",
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "nozzle_type": "hardened_steel",
     "single_extruder_multi_material": "1",
     "layer_change_gcode": "",
diff --git a/resources/profiles/iQ/machine/fdm_tiq_common.json b/resources/profiles/iQ/machine/fdm_tiq_common.json
index ac0cc450f5..368e603a06 100644
--- a/resources/profiles/iQ/machine/fdm_tiq_common.json
+++ b/resources/profiles/iQ/machine/fdm_tiq_common.json
@@ -176,6 +176,7 @@
         "30"
     ],
     "scan_first_layer": "0",
+    "disable_power_loss_recovery": "0",
     "silent_mode": "0",
     "single_extruder_multi_material": "0",
     "support_air_filtration": "1",