Orca filament profile revamp - done (#8287)

* Update Qidi profiles

* restructure orca filament lib folder

* update profiles

* add more global filaments

* check missing instantiation errors

* fix missing instantiation attribute

* delete voron generic filaments

* remove Mellow filaments

* clean profiles

* QoL: select only visible filament when select all filaments

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.2 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "HATCHBOX ABS @0.2 nozzle",
+    "name": "HATCHBOX ABS @Qidi 0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "filament_flow_ratio": [
         "0.95"
     ],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.6 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "HATCHBOX ABS @0.6 nozzle",
+    "name": "HATCHBOX ABS @Qidi 0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi 0.8 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "HATCHBOX ABS @0.8 nozzle",
+    "name": "HATCHBOX ABS @Qidi 0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "filament_flow_ratio": [
         "0.95"
     ],

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi Q1 Pro 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -31,7 +31,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi Q1 Pro 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi Q1 Pro 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi Q1 Pro 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi X-Plus 4 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi X-Plus 4 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi X-Plus 4 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "HATCHBOX ABS",
+    "inherits": "HATCHBOX ABS @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX ABS @Qidi X-Plus 4 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX ABS @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "HATCHBOX ABS",
+    "name": "HATCHBOX ABS @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_abs",

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.2 nozzle.json

@@ -5,7 +5,7 @@
     "name": "HATCHBOX PETG @0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
 	"reduce_fan_stop_start_freq": [
         "1"
     ],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.6 nozzle.json

@@ -5,7 +5,7 @@
     "name": "HATCHBOX PETG @0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
 	"reduce_fan_stop_start_freq": [
         "1"
     ],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi 0.8 nozzle.json

@@ -5,7 +5,7 @@
     "name": "HATCHBOX PETG @0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
 	"reduce_fan_stop_start_freq": [
         "1"
     ],

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi Q1 Pro 0.2 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi Q1 Pro 0.4 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi Q1 Pro 0.6 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi Q1 Pro 0.8 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi X-Plus 4 0.2 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi X-Plus 4 0.4 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi X-Plus 4 0.6 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle.json

@@ -18,7 +18,7 @@
     "hot_plate_temp_initial_layer": [
         "80"
     ],
-    "inherits": "HATCHBOX PETG",
+    "inherits": "HATCHBOX PETG @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PETG @Qidi X-Plus 4 0.8 nozzle",
     "overhang_fan_speed": [

resources/profiles/Qidi/filament/HATCHBOX PETG @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
 	"filament_id": "GFG99",
     "setting_id": "GFSG99",
-    "name": "HATCHBOX PETG",
+    "name": "HATCHBOX PETG @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_pet",

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.2 nozzle.json

@@ -5,7 +5,7 @@
     "name": "HATCHBOX PLA @0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
 	"filament_flow_ratio": [
         "0.98"
     ],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.6 nozzle.json

@@ -5,7 +5,7 @@
     "name": "HATCHBOX PLA @0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
 	"filament_flow_ratio": [
         "0.98"
     ],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi 0.8 nozzle.json

@@ -5,7 +5,7 @@
     "name": "HATCHBOX PLA @0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
 	"filament_flow_ratio": [
         "0.98"
     ],

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi Q1 Pro 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi Q1 Pro 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi Q1 Pro 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi Q1 Pro 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi X-Plus 4 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi X-Plus 4 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi X-Plus 4 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "HATCHBOX PLA",
+    "inherits": "HATCHBOX PLA @Qidi",
     "is_custom_defined": "0",
     "name": "HATCHBOX PLA @Qidi X-Plus 4 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/HATCHBOX PLA @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "HATCHBOX PLA",
+    "name": "HATCHBOX PLA @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_pla",

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.2 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "Overture ABS @0.2 nozzle",
+    "name": "Overture ABS @Qidi 0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.6 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "Overture ABS @0.6 nozzle",
+    "name": "Overture ABS @Qidi 0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/Overture ABS @Qidi 0.8 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "Overture ABS @0.8 nozzle",
+    "name": "Overture ABS @Qidi 0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi Q1 Pro 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -28,7 +28,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi Q1 Pro 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -22,7 +22,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi Q1 Pro 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -22,7 +22,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi Q1 Pro 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -22,7 +22,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi X-Plus 4 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -19,7 +19,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi X-Plus 4 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -19,7 +19,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi X-Plus 4 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -19,7 +19,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "Overture ABS",
+    "inherits": "Overture ABS @Qidi",
     "is_custom_defined": "0",
     "name": "Overture ABS @Qidi X-Plus 4 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture ABS @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "Overture ABS",
+    "name": "Overture ABS @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_abs",

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.2 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "PolyLite PLA @0.2 nozzle",
+    "name": "Overture PLA @Qidi 0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "PolyLite PLA",
+    "inherits": "Overture PLA @Qidi",
     "pressure_advance": [
         "0.057"
     ],

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.6 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "Overture PLA @0.6 nozzle",
+    "name": "Overture PLA @Qidi 0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/Overture PLA @Qidi 0.8 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "Overture PLA @0.8 nozzle",
+    "name": "Overture PLA @Qidi 0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi Q1 Pro 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi Q1 Pro 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi Q1 Pro 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi Q1 Pro 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi X-Plus 4 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi X-Plus 4 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi X-Plus 4 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "Overture PLA",
+    "inherits": "Overture PLA @Qidi",
     "is_custom_defined": "0",
     "name": "Overture PLA @Qidi X-Plus 4 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/Overture PLA @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "Overture PLA",
+    "name": "Overture PLA @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_pla",

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.2 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "PolyLite ABS @0.2 nozzle",
+    "name": "PolyLite ABS @Qidi 0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.6 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "PolyLite ABS @0.6 nozzle",
+    "name": "PolyLite ABS @Qidi 0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi 0.8 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "PolyLite ABS @0.8 nozzle",
+    "name": "PolyLite ABS @Qidi 0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.2 nozzle.json

@@ -25,7 +25,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi Q1 Pro 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.4 nozzle.json

@@ -28,7 +28,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi Q1 Pro 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.6 nozzle.json

@@ -22,7 +22,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi Q1 Pro 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi Q1 Pro 0.8 nozzle.json

@@ -22,7 +22,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi Q1 Pro 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.2 nozzle.json

@@ -22,7 +22,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi X-Plus 4 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.4 nozzle.json

@@ -19,7 +19,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi X-Plus 4 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.6 nozzle.json

@@ -19,7 +19,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi X-Plus 4 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi X-Plus 4 0.8 nozzle.json

@@ -19,7 +19,7 @@
     "hot_plate_temp_initial_layer": [
         "90"
     ],
-    "inherits": "PolyLite ABS",
+    "inherits": "PolyLite ABS @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite ABS @Qidi X-Plus 4 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite ABS @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
     "filament_id": "GFB99",
     "setting_id": "GFSA04",
-    "name": "PolyLite ABS",
+    "name": "PolyLite ABS @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_abs",

resources/profiles/Qidi/filament/PolyLite PLA @Qidi 0.2 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "Overture PLA @0.2 nozzle",
+    "name": "PolyLite PLA @Qidi 0.2 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "Overture PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "pressure_advance": [
         "0.057"
     ],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi 0.6 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "PolyLite PLA @0.6 nozzle",
+    "name": "PolyLite PLA @Qidi 0.6 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi 0.8 nozzle.json

@@ -2,10 +2,10 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "PolyLite PLA @0.8 nozzle",
+    "name": "PolyLite PLA @Qidi 0.8 nozzle",
     "from": "system",
     "instantiation": "true",
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "enable_pressure_advance": [
         "1"
     ],

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.2 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi Q1 Pro 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.4 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi Q1 Pro 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.6 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi Q1 Pro 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi Q1 Pro 0.8 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi Q1 Pro 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.2 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi X-Plus 4 0.2 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.4 nozzle.json

@@ -33,7 +33,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi X-Plus 4 0.4 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.6 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi X-Plus 4 0.6 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi X-Plus 4 0.8 nozzle.json

@@ -30,7 +30,7 @@
     "hot_plate_temp_initial_layer": [
         "60"
     ],
-    "inherits": "PolyLite PLA",
+    "inherits": "PolyLite PLA @Qidi",
     "is_custom_defined": "0",
     "name": "PolyLite PLA @Qidi X-Plus 4 0.8 nozzle",
     "nozzle_temperature": [

resources/profiles/Qidi/filament/PolyLite PLA @Qidi.json

@@ -2,7 +2,7 @@
     "type": "filament",
 	"filament_id": "GFL99",
     "setting_id": "GFSL99",
-    "name": "PolyLite PLA",
+    "name": "PolyLite PLA @Qidi",
     "from": "system",
     "instantiation": "true",
     "inherits": "fdm_filament_pla",