mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-14 20:47:33 +00:00
Feature/revert recent flashforge changes(#8498)
* Revert "fix more Flashforge issues" This reverts commit6e473fd5fa. * Revert "Fixed an issue that some Flashforge filament profiles don't' have compatible_printers defined which cause filament selection dialog didn't filter properly" This reverts commitf8c0cdfb11. * Revert "Merged Orca-Flashforge 1.3 branch (Added AD5X & G4P) + fixes & optimizations (#8461)" This reverts commitb8e4ce75e0, reversing changes made tobe8bf54884.
This commit is contained in:
SoftFever
@@ -1,39 +0,0 @@
|
||||
{
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"filament_density": ["1.04"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["FlashForge PC @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PC"
|
||||
],
|
||||
"filament_type": ["PC"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "FlashForge PC @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature_initial_layer": ["265"],
|
||||
"nozzle_temperature_range_high": ["290"],
|
||||
"nozzle_temperature_range_low": ["250"],
|
||||
"overhang_fan_speed": ["50"],
|
||||
"slow_down_layer_time": ["12"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["50"],
|
||||
"temperature_vitrification": ["120"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,39 +0,0 @@
|
||||
{
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"filament_density": ["1.04"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["FlashForge PC @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PC"
|
||||
],
|
||||
"filament_type": ["PC"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "FlashForge PC @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature_initial_layer": ["265"],
|
||||
"nozzle_temperature_range_high": ["290"],
|
||||
"nozzle_temperature_range_low": ["250"],
|
||||
"overhang_fan_speed": ["50"],
|
||||
"slow_down_layer_time": ["12"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["50"],
|
||||
"temperature_vitrification": ["120"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,39 +0,0 @@
|
||||
{
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"filament_density": ["1.04"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["FlashForge PC @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PC"
|
||||
],
|
||||
"filament_type": ["PC"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "FusRock Generic S-PAHT @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "FlashForge PC @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature_initial_layer": ["265"],
|
||||
"nozzle_temperature_range_high": ["290"],
|
||||
"nozzle_temperature_range_low": ["250"],
|
||||
"overhang_fan_speed": ["50"],
|
||||
"slow_down_layer_time": ["12"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["50"],
|
||||
"temperature_vitrification": ["120"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,46 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["2"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["5"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_cost": ["175"],
|
||||
"filament_density": ["1.36"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["FlashForge PPS @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PPS"
|
||||
],
|
||||
"filament_type": ["PPS"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "FlashForge PPS @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["315"],
|
||||
"nozzle_temperature_initial_layer": ["320"],
|
||||
"nozzle_temperature_range_high": ["320"],
|
||||
"nozzle_temperature_range_low": ["300"],
|
||||
"overhang_fan_speed": ["40"],
|
||||
"pressure_advance": ["0.03"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"support_material_interface_fan_speed": ["40"],
|
||||
"temperature_vitrification": ["125"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,46 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["2"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["5"],
|
||||
"fan_max_speed": ["50"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_cost": ["175"],
|
||||
"filament_density": ["1.36"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["FlashForge PPS @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PPS"
|
||||
],
|
||||
"filament_type": ["PPS"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "FlashForge PPS @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["315"],
|
||||
"nozzle_temperature_initial_layer": ["320"],
|
||||
"nozzle_temperature_range_high": ["320"],
|
||||
"nozzle_temperature_range_low": ["300"],
|
||||
"overhang_fan_speed": ["40"],
|
||||
"pressure_advance": ["0.03"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"support_material_interface_fan_speed": ["40"],
|
||||
"temperature_vitrification": ["125"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,44 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["2"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["5"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_cost": ["175"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["FlashForge PPS-CF @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PPS"
|
||||
],
|
||||
"filament_type": ["PPS"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "FusRock Generic PET-CF @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "FlashForge PPS-CF @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["315"],
|
||||
"nozzle_temperature_initial_layer": ["320"],
|
||||
"nozzle_temperature_range_high": ["320"],
|
||||
"nozzle_temperature_range_low": ["300"],
|
||||
"overhang_fan_speed": ["40"],
|
||||
"pressure_advance": ["0.03"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"support_material_interface_fan_speed": ["40"],
|
||||
"temperature_vitrification": ["220"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,32 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "FFF02",
|
||||
"setting_id": "FFFA01",
|
||||
"name": "Flashforge ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_vendor": ["Flashforge"],
|
||||
"filament_flow_ratio": ["1.09"],
|
||||
"filament_max_volumetric_speed": ["20"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"support_material_interface_fan_speed": ["80"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: ABS\n"
|
||||
],
|
||||
"filament_end_gcode": ["; filament end gcode\n"],
|
||||
"filament_diameter": ["1.75"],
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"nozzle_temperature": ["230"],
|
||||
"enable_pressure_advance": ["1"],
|
||||
"pressure_advance": ["0.00"],
|
||||
"filament_density": ["1.04"],
|
||||
"temperature_vitrification": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 3 Series 0.4 Nozzle",
|
||||
"Flashforge Adventurer 3 Series 0.6 Nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,28 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["100"],
|
||||
"cool_plate_temp_initial_layer": ["100"],
|
||||
"eng_plate_temp": ["100"],
|
||||
"eng_plate_temp_initial_layer": ["100"],
|
||||
"fan_max_speed": ["20"],
|
||||
"filament_cost": ["20"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF AD5X 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_02",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS @FF AD5M 0.25 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF AD5X 0.25 nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["100"],
|
||||
"textured_plate_temp_initial_layer": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["105"],
|
||||
"cool_plate_temp_initial_layer": ["105"],
|
||||
"eng_plate_temp": ["105"],
|
||||
"eng_plate_temp_initial_layer": ["105"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF AD5X 0.6 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF AD5X 0.6 nozzle",
|
||||
"textured_plate_temp": ["105"],
|
||||
"textured_plate_temp_initial_layer": ["105"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["105"],
|
||||
"cool_plate_temp_initial_layer": ["105"],
|
||||
"eng_plate_temp": ["105"],
|
||||
"eng_plate_temp_initial_layer": ["105"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF AD5X 0.8 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF AD5X 0.8 nozzle",
|
||||
"textured_plate_temp": ["105"],
|
||||
"textured_plate_temp_initial_layer": ["105"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["100"],
|
||||
"cool_plate_temp_initial_layer": ["100"],
|
||||
"eng_plate_temp": ["100"],
|
||||
"eng_plate_temp_initial_layer": ["100"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["20"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF AD5X"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF AD5X",
|
||||
"nozzle_temperature": ["260"],
|
||||
"textured_plate_temp": ["100"],
|
||||
"textured_plate_temp_initial_layer": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["20"],
|
||||
"filament_cost": ["20"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF G4P 0.25 nozzle"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge ABS Basic @FF G4P",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF G4P 0.25 nozzle",
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,42 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["110"],
|
||||
"eng_plate_temp_initial_layer": ["110"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:ABS"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"hot_plate_temp": ["110"],
|
||||
"hot_plate_temp_initial_layer": ["110"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["110"],
|
||||
"textured_plate_temp_initial_layer": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,107 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"1"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"60"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"35"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"29"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"28"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge ABS Basic @FF G4P 0.6 nozzle"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:ABS"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"29"
|
||||
],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"Flashforge Guider4 Pro 0.6 nozzle"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"115"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"115"
|
||||
],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,43 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:ABS"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,33 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["20"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: ABS\n"
|
||||
],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF G4P HF",
|
||||
"nozzle_temperature": ["265"],
|
||||
"nozzle_temperature_initial_layer": ["265"],
|
||||
"nozzle_temperature_range_high": ["270"],
|
||||
"nozzle_temperature_range_low": ["230"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"support_material_interface_fan_speed": ["80"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,17 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_settings_id": ["Flashforge ABS Basic @FF G4P"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS Basic @FF G4P",
|
||||
"slow_down_layer_time": ["4"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,43 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ABS-CF @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:ABS"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS-CF @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["30"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_settings_id": ["Flashforge ABS-CF @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: ABS-CF\n"
|
||||
],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ABS-CF @FF G4P",
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"nozzle_temperature_range_low": ["240"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"slow_down_layer_time": ["6"],
|
||||
"temperature_vitrification": ["70"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,29 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["100"],
|
||||
"cool_plate_temp_initial_layer": ["100"],
|
||||
"eng_plate_temp": ["100"],
|
||||
"eng_plate_temp_initial_layer": ["100"],
|
||||
"fan_max_speed": ["20"],
|
||||
"filament_cost": ["20"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF AD5X 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_05",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge ASA Basic @FF AD5X",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF AD5X 0.25 nozzle",
|
||||
"nozzle_temperature_initial_layer": ["265"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"textured_plate_temp": ["100"],
|
||||
"textured_plate_temp_initial_layer": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["105"],
|
||||
"cool_plate_temp_initial_layer": ["105"],
|
||||
"eng_plate_temp": ["105"],
|
||||
"eng_plate_temp_initial_layer": ["105"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF AD5X 0.6 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF AD5X 0.6 nozzle",
|
||||
"textured_plate_temp": ["105"],
|
||||
"textured_plate_temp_initial_layer": ["105"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["105"],
|
||||
"cool_plate_temp_initial_layer": ["105"],
|
||||
"eng_plate_temp": ["105"],
|
||||
"eng_plate_temp_initial_layer": ["105"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["18"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF AD5X 0.8 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF AD5X 0.8 nozzle",
|
||||
"textured_plate_temp": ["105"],
|
||||
"textured_plate_temp_initial_layer": ["105"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["100"],
|
||||
"cool_plate_temp_initial_layer": ["100"],
|
||||
"eng_plate_temp": ["100"],
|
||||
"eng_plate_temp_initial_layer": ["100"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["20"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF AD5X"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF AD5X",
|
||||
"nozzle_temperature": ["260"],
|
||||
"textured_plate_temp": ["100"],
|
||||
"textured_plate_temp_initial_layer": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["20"],
|
||||
"filament_cost": ["20"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF G4P 0.25 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: ASA\n"
|
||||
],
|
||||
"filament_type": ["ASA"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge ASA Basic @FF AD5X",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF G4P 0.25 nozzle",
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,43 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:ASA"
|
||||
],
|
||||
"filament_type": ["ASA"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,44 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:ASA"
|
||||
],
|
||||
"filament_type": ["ASA"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,44 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:ASA"
|
||||
],
|
||||
"filament_type": ["ASA"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,34 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["20"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: ASA\n"
|
||||
],
|
||||
"filament_type": ["ASA"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF G4P HF",
|
||||
"nozzle_temperature": ["265"],
|
||||
"nozzle_temperature_initial_layer": ["265"],
|
||||
"nozzle_temperature_range_high": ["270"],
|
||||
"nozzle_temperature_range_low": ["230"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"support_material_interface_fan_speed": ["80"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,21 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_settings_id": ["Flashforge ASA Basic @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: ASA\n"
|
||||
],
|
||||
"filament_type": ["ASA"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge ASA Basic @FF G4P",
|
||||
"slow_down_layer_time": ["4"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,63 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Flashforge ASA-CF",
|
||||
"inherits": "FusRock Generic PAHT-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge ASA-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"is_custom_defined": "0",
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"version": "2.0.2.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,43 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HIPS @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:HIPS"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HIPS @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,43 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["115"],
|
||||
"eng_plate_temp_initial_layer": ["115"],
|
||||
"fan_cooling_layer_time": ["35"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["25"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HIPS @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:HIPS"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["115"],
|
||||
"hot_plate_temp_initial_layer": ["115"],
|
||||
"inherits": "Flashforge Generic ABS @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HIPS @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"nozzle_temperature_range_high": ["280"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"textured_plate_temp": ["115"],
|
||||
"textured_plate_temp_initial_layer": ["115"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HIPS @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: HIPS\n"
|
||||
],
|
||||
"filament_type": ["HIPS"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HIPS @FF G4P HF",
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"nozzle_temperature_range_high": ["250"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,38 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"close_fan_the_first_x_layers": ["2"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"fan_max_speed": ["30"],
|
||||
"fan_min_speed": ["10"],
|
||||
"filament_density": ["1.04"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge HIPS @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:HIPS\n"
|
||||
],
|
||||
"filament_type": ["HIPS"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic HS PLA",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HIPS @FF G4P",
|
||||
"nozzle_temperature": ["230"],
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"nozzle_temperature_range_high": ["250"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["50"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.036"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"support_material_interface_fan_speed": ["40"],
|
||||
"temperature_vitrification": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,28 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"fan_max_speed": ["100"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF AD5X 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_12",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG @FF AD5M 0.25 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF AD5X 0.25 nozzle",
|
||||
"nozzle_temperature": ["235"],
|
||||
"nozzle_temperature_initial_layer": ["240"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF AD5X 0.6 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF AD5X 0.6 nozzle",
|
||||
"nozzle_temperature": ["235"],
|
||||
"nozzle_temperature_initial_layer": ["235"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF AD5X 0.8 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF AD5X 0.8 nozzle",
|
||||
"nozzle_temperature": ["235"],
|
||||
"nozzle_temperature_initial_layer": ["235"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF AD5X"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF AD5X",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"nozzle_temperature": ["235"],
|
||||
"nozzle_temperature_initial_layer": ["240"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["80"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF G4P 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge HS PETG @FF G4P",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF G4P 0.25 nozzle",
|
||||
"nozzle_temperature": ["230"],
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,34 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["2"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["40"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["30"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_ramming_parameters": [
|
||||
"105 105 6.68817 6.75269 6.43011 7.39785 11.957 17.6344 20 19.8925 19.8925 19.1398 13.5484 4.60215 0.215054 0.193548 0.473118 0.494624| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 19.8699 1.95 19.7215 2.45 19.0323 2.95 1.06237 3.45 0.245161 3.95 0.417204 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["235"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["0"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,39 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["90"],
|
||||
"fan_min_speed": ["40"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_density": ["1.27"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PLA\n"
|
||||
],
|
||||
"filament_type": ["PETG"],
|
||||
"filament_unload_time": ["29"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF G4P HF",
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"pressure_advance": ["0.075"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"temperature_vitrification": ["70"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PETG @FF G4P"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PETG @FF G4P",
|
||||
"nozzle_temperature": ["230"],
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"complete_print_exhaust_fan_speed": ["80"],
|
||||
"cool_plate_temp_initial_layer": ["60"],
|
||||
"during_print_exhaust_fan_speed": ["60"],
|
||||
"eng_plate_temp_initial_layer": ["60"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF AD5X 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_19",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
|
||||
"hot_plate_temp": ["60"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"inherits": "Flashforge Generic PLA @FF AD5M 0.25 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF AD5X 0.25 nozzle",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["215"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["6"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"textured_plate_temp_initial_layer": ["60"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,21 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp_initial_layer": ["60"],
|
||||
"eng_plate_temp_initial_layer": ["60"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF AD5X 0.6 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"hot_plate_temp": ["60"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"inherits": "Flashforge Generic PLA",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF AD5X 0.6 nozzle",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"textured_plate_temp_initial_layer": ["60"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,21 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp_initial_layer": ["60"],
|
||||
"eng_plate_temp_initial_layer": ["60"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF AD5X 0.8 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"hot_plate_temp": ["60"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"inherits": "Flashforge Generic PLA",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF AD5X 0.8 nozzle",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"textured_plate_temp_initial_layer": ["60"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp_initial_layer": ["60"],
|
||||
"eng_plate_temp_initial_layer": ["60"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF AD5X"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"hot_plate_temp": ["60"],
|
||||
"hot_plate_temp_initial_layer": ["60"],
|
||||
"inherits": "Flashforge Generic PLA",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF AD5X",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["215"],
|
||||
"textured_plate_temp_initial_layer": ["60"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF G4P 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
|
||||
"hot_plate_temp": ["55"],
|
||||
"hot_plate_temp_initial_layer": ["55"],
|
||||
"inherits": "Flashforge HS PLA @FF G4P",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF G4P 0.25 nozzle",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"overhang_fan_threshold": ["50%"],
|
||||
"pressure_advance": ["0.026"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,34 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["43"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_ramming_parameters": [
|
||||
"105 105 9.50538 9.56989 9.39785 10.2366 13.7634 18.129 19.9355 19.8495 19.8925 19.3548 13.6559 4.32258 0.0430108 0.301075 0.645161 0.55914| 0.05 9.43871 0.45 9.5957 0.95 10.5957 1.45 19.6978 1.95 19.6355 2.45 19.5484 2.95 0.417204 3.45 0.417204 3.95 0.417204 4.45 0.288172 4.95 0.245161"
|
||||
],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:PLA\n\n\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["9"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"temperature_vitrification": ["45"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,32 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PLA\n\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["205"],
|
||||
"nozzle_temperature_initial_layer": ["205"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"temperature_vitrification": ["45"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,32 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PLA\n\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["205"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"temperature_vitrification": ["45"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,42 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["100"],
|
||||
"filament_density": ["1.24"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["49"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PLA\n"
|
||||
],
|
||||
"filament_type": ["PLA"],
|
||||
"filament_unload_time": ["29"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["55"],
|
||||
"hot_plate_temp_initial_layer": ["55"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF G4P HF",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"nozzle_temperature_range_high": ["240"],
|
||||
"nozzle_temperature_range_low": ["190"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"overhang_fan_threshold": ["50%"],
|
||||
"pressure_advance": ["0.031"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"temperature_vitrification": ["60"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge HS PLA @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PLA\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["55"],
|
||||
"inherits": "Flashforge Generic HS PLA",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA @FF G4P",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"nozzle_temperature_range_high": ["240"],
|
||||
"pressure_advance": ["0.026"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,35 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["35"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_ramming_parameters": [
|
||||
"105 105 9.87097 10.129 10.129 10.9247 14.1505 18.1505 19.7634 19.7419 19.8925 19.5484 13.9785 4.45161 0.0430108 0.236559 0.473118 0.301075| 0.05 9.73979 0.45 10.2409 0.95 11.2409 1.45 19.5688 1.95 19.5925 2.45 19.9355 2.95 0.503226 3.45 0.331183 3.95 0.116129 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_settings_id": ["Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:PLA\n\n\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["200"],
|
||||
"nozzle_temperature_initial_layer": ["215"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["9"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"temperature_vitrification": ["45"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,42 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["100"],
|
||||
"filament_density": ["1.24"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["49"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PLA Burnt Ti @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PLA\n"
|
||||
],
|
||||
"filament_type": ["PLA"],
|
||||
"filament_unload_time": ["29"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["55"],
|
||||
"hot_plate_temp_initial_layer": ["55"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA Burnt Ti @FF G4P HF",
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"nozzle_temperature_range_high": ["240"],
|
||||
"nozzle_temperature_range_low": ["190"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"overhang_fan_threshold": ["50%"],
|
||||
"pressure_advance": ["0.031"],
|
||||
"slow_down_layer_time": ["4"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"temperature_vitrification": ["60"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,32 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PLA\n\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["200"],
|
||||
"nozzle_temperature_initial_layer": ["205"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"temperature_vitrification": ["45"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,32 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["100"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["28"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PLA\n\n"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["200"],
|
||||
"nozzle_temperature_initial_layer": ["205"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.025"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"temperature_vitrification": ["45"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,47 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["2"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"cool_plate_temp": ["0"],
|
||||
"cool_plate_temp_initial_layer": ["0"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"eng_plate_temp": ["105"],
|
||||
"eng_plate_temp_initial_layer": ["105"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"fan_max_speed": ["80"],
|
||||
"fan_min_speed": ["50"],
|
||||
"filament_density": ["1.04"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["15"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PA @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:PA\n\n\n"
|
||||
],
|
||||
"filament_type": ["PA"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"hot_plate_temp": ["105"],
|
||||
"hot_plate_temp_initial_layer": ["105"],
|
||||
"inherits": "Flashforge Generic PLA @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PA @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["290"],
|
||||
"nozzle_temperature_initial_layer": ["290"],
|
||||
"nozzle_temperature_range_high": ["295"],
|
||||
"nozzle_temperature_range_low": ["240"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"pressure_advance": ["0.023"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"support_material_interface_fan_speed": ["80"],
|
||||
"temperature_vitrification": ["108"],
|
||||
"textured_plate_temp": ["105"],
|
||||
"textured_plate_temp_initial_layer": ["105"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_density": ["1.24"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PA @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PA\n"
|
||||
],
|
||||
"filament_type": ["PA"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PA @FF G4P HF",
|
||||
"nozzle_temperature": ["280"],
|
||||
"nozzle_temperature_initial_layer": ["280"],
|
||||
"nozzle_temperature_range_high": ["300"],
|
||||
"nozzle_temperature_range_low": ["260"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"overhang_fan_threshold": ["50%"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"temperature_vitrification": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,31 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge PA @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PA\n"
|
||||
],
|
||||
"filament_type": ["PA"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic TPU",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PA @FF G4P",
|
||||
"nozzle_temperature": ["280"],
|
||||
"nozzle_temperature_initial_layer": ["280"],
|
||||
"nozzle_temperature_range_high": ["300"],
|
||||
"nozzle_temperature_range_low": ["260"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"temperature_vitrification": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["5"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_density": ["1.06"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge PA-CF @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PA-CF\n"
|
||||
],
|
||||
"filament_type": ["PA-CF"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic PLA-CF10",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PA-CF @FF G4P",
|
||||
"nozzle_temperature": ["290"],
|
||||
"nozzle_temperature_initial_layer": ["290"],
|
||||
"nozzle_temperature_range_high": ["300"],
|
||||
"nozzle_temperature_range_low": ["260"],
|
||||
"overhang_fan_speed": ["60"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"slow_down_layer_time": ["2"],
|
||||
"support_material_interface_fan_speed": ["60"],
|
||||
"temperature_vitrification": ["180"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,66 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Flashforge PA12-CF",
|
||||
"inherits": "FusRock Generic PET-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PA12-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"is_custom_defined": "0",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"version": "2.0.2.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,63 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Flashforge PA6-CF",
|
||||
"inherits": "FusRock Generic PET-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PA6-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA6-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"is_custom_defined": "0",
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"version": "2.0.2.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,63 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Flashforge PA66-CF",
|
||||
"inherits": "FusRock Generic PET-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PA66-CF"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"is_custom_defined": "0",
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"version": "2.0.2.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"chamber_temperature": ["60"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["5"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_density": ["1.06"],
|
||||
"filament_flow_ratio": ["0.95"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge PAHT-CF @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PA-CF\n"
|
||||
],
|
||||
"filament_type": ["PA-CF"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["100"],
|
||||
"hot_plate_temp_initial_layer": ["100"],
|
||||
"inherits": "Flashforge Generic PLA-CF10",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PAHT-CF @FF G4P",
|
||||
"nozzle_temperature": ["290"],
|
||||
"nozzle_temperature_initial_layer": ["290"],
|
||||
"nozzle_temperature_range_high": ["300"],
|
||||
"nozzle_temperature_range_low": ["260"],
|
||||
"overhang_fan_speed": ["60"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"slow_down_layer_time": ["2"],
|
||||
"support_material_interface_fan_speed": ["60"],
|
||||
"temperature_vitrification": ["180"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,35 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["10"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["0"],
|
||||
"filament_max_volumetric_speed": ["15"],
|
||||
"filament_settings_id": ["Flashforge PET @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PET\n"
|
||||
],
|
||||
"filament_type": ["PET-CF"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic TPU",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PET @FF G4P",
|
||||
"nozzle_temperature": ["280"],
|
||||
"nozzle_temperature_initial_layer": ["280"],
|
||||
"nozzle_temperature_range_high": ["300"],
|
||||
"nozzle_temperature_range_low": ["260"],
|
||||
"overhang_fan_speed": ["30"],
|
||||
"overhang_fan_threshold": ["95%"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"slow_down_layer_time": ["6"],
|
||||
"support_material_interface_fan_speed": ["-1"],
|
||||
"temperature_vitrification": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,35 +0,0 @@
|
||||
{
|
||||
"activate_chamber_temp_control": ["1"],
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"chamber_temperature": ["60"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["10"],
|
||||
"fan_max_speed": ["60"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_flow_ratio": ["0.98"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge PET-CF @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PET-CF\n"
|
||||
],
|
||||
"filament_type": ["PET-CF"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic TPU",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PET-CF @FF G4P",
|
||||
"nozzle_temperature": ["280"],
|
||||
"nozzle_temperature_initial_layer": ["280"],
|
||||
"nozzle_temperature_range_high": ["300"],
|
||||
"nozzle_temperature_range_low": ["260"],
|
||||
"overhang_fan_speed": ["60"],
|
||||
"pressure_advance": ["0.02"],
|
||||
"slow_down_layer_time": ["6"],
|
||||
"support_material_interface_fan_speed": ["60"],
|
||||
"temperature_vitrification": ["110"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,57 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Flashforge PET-CF",
|
||||
"inherits": "FusRock Generic PET-CF",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PET-CF"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"is_custom_defined": "0",
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"20"
|
||||
],
|
||||
"version": "2.0.2.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,41 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "FFF03",
|
||||
"setting_id": "FFFP02",
|
||||
"name": "Flashforge PETG",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"filament_vendor": ["Flashforge"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_max_volumetric_speed": ["20"],
|
||||
"slow_down_layer_time": ["8"],
|
||||
"temperature_vitrification": ["70"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"additional_cooling_fan_speed": ["50"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode \n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_end_gcode": ["; filament end gcode\n"],
|
||||
"filament_diameter": ["1.75"],
|
||||
"enable_pressure_advance": ["1"],
|
||||
"pressure_advance": ["0.0"],
|
||||
"filament_density": ["1.27"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"nozzle_temperature_range_high": ["260"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature": ["245"],
|
||||
"fan_cooling_layer_time": ["30"],
|
||||
"fan_max_speed": ["90"],
|
||||
"fan_min_speed": ["40"],
|
||||
"overhang_fan_threshold": ["25%"],
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 3 Series 0.4 Nozzle",
|
||||
"Flashforge Adventurer 3 Series 0.6 Nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_settings_id": ["Flashforge PETG Basic @G3U"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "false",
|
||||
"inherits": "Flashforge Generic PETG @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Basic @G3U",
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,42 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"additional_cooling_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PETG Basic"
|
||||
],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Basic",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"265"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.1.1.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"fan_max_speed": ["100"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF AD5X 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_12",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG @FF AD5M 0.25 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF AD5X 0.25 nozzle",
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF AD5X 0.6 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF AD5X 0.6 nozzle",
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF AD5X 0.8 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF AD5X 0.8 nozzle",
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF AD5X"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF AD5X",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["80"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF G4P 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge PETG Pro @FF G4P",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF G4P 0.25 nozzle",
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,28 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_ramming_parameters": [
|
||||
"105 105 6.68817 6.75269 6.51613 7.54839 11.9355 17.5054 19.957 19.828 19.828 18.9892 13.0538 4.08602 0.0430108 0.387097 0.666667 0.344086| 0.05 6.6 0.45 6.8 0.95 7.97204 1.45 19.4828 1.95 19.5495 2.45 18.7742 2.95 0.331183 3.45 0.632258 3.95 0.116129 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["235"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["0"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,40 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["90"],
|
||||
"fan_min_speed": ["40"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_density": ["1.27"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PETG\n"
|
||||
],
|
||||
"filament_type": ["PETG"],
|
||||
"filament_unload_time": ["29"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF G4P HF",
|
||||
"nozzle_temperature": ["255"],
|
||||
"nozzle_temperature_initial_layer": ["255"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"temperature_vitrification": ["70"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Pro @FF G4P"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro @FF G4P",
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,42 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"additional_cooling_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PETG Pro"
|
||||
],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Pro",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.1.1.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"fan_max_speed": ["100"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["8"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF AD5X 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_12",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.25 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG @FF AD5M 0.25 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF AD5X 0.25 nozzle",
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF AD5X 0.6 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF AD5X 0.6 nozzle",
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF AD5X 0.8 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF AD5X 0.8 nozzle",
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF AD5X"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF AD5X",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"nozzle_temperature_initial_layer": ["260"],
|
||||
"pressure_advance": ["0.04"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["100"],
|
||||
"fan_min_speed": ["80"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["12"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF G4P 0.25 nozzle"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.25 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge PETG Transparent @FF G4P",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF G4P 0.25 nozzle",
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,28 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_ramming_parameters": [
|
||||
"105 105 6.68817 6.75269 6.51613 7.54839 11.9355 17.5054 19.957 19.828 19.828 18.9892 13.0538 4.08602 0.0430108 0.387097 0.666667 0.344086| 0.05 6.6 0.45 6.8 0.95 7.97204 1.45 19.4828 1.95 19.5495 2.45 18.7742 2.95 0.331183 3.45 0.632258 3.95 0.116129 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF G4P 0.6 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n; right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 HF nozzle"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF G4P 0.6 HF nozzle",
|
||||
"nozzle_temperature": ["235"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.96"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF G4P 0.8 HF nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.8 HF nozzle"],
|
||||
"hot_plate_temp": ["0"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF G4P 0.8 HF nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,40 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"close_fan_the_first_x_layers": ["1"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_max_speed": ["90"],
|
||||
"fan_min_speed": ["40"],
|
||||
"filament_cost": ["30"],
|
||||
"filament_density": ["1.27"],
|
||||
"filament_flow_ratio": ["1"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["25"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF G4P HF"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PETG\n"
|
||||
],
|
||||
"filament_type": ["PETG"],
|
||||
"filament_unload_time": ["29"],
|
||||
"filament_unloading_speed": ["90"],
|
||||
"filament_unloading_speed_start": ["100"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 HF nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic ABS @G3U",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF G4P HF",
|
||||
"nozzle_temperature": ["255"],
|
||||
"nozzle_temperature_initial_layer": ["255"],
|
||||
"overhang_fan_speed": ["80"],
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"slow_down_min_speed": ["30"],
|
||||
"support_material_interface_fan_speed": ["90"],
|
||||
"temperature_vitrification": ["70"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"activate_air_filtration": ["1"],
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_settings_id": ["Flashforge PETG Transparent @FF G4P"],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent @FF G4P",
|
||||
"pressure_advance": ["0.045"],
|
||||
"slow_down_layer_time": ["5"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,42 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"additional_cooling_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Flashforge PETG Transparent"
|
||||
],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG Transparent",
|
||||
"nozzle_temperature": [
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"265"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.1.1.0",
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 5M 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M 0.8 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.4 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.6 Nozzle",
|
||||
"Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"Flashforge AD5X 0.4 nozzle",
|
||||
"Flashforge AD5X 0.6 nozzle",
|
||||
"Flashforge AD5X 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_settings_id": ["Flashforge PETG-CF @FF AD5X 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG-CF\n"
|
||||
],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.6 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG-CF10",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG-CF @FF AD5X 0.6 nozzle",
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,22 +0,0 @@
|
||||
{
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_settings_id": ["Flashforge PETG-CF @FF AD5X 0.8 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG-CF\n"
|
||||
],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge AD5X 0.8 nozzle"],
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG-CF10",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG-CF @FF AD5X 0.8 nozzle",
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"cool_plate_temp": ["75"],
|
||||
"cool_plate_temp_initial_layer": ["75"],
|
||||
"eng_plate_temp": ["75"],
|
||||
"eng_plate_temp_initial_layer": ["75"],
|
||||
"filament_settings_id": ["Flashforge PETG-CF @FF AD5X"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG-CF\n"
|
||||
],
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04",
|
||||
"instantiation": "true",
|
||||
"hot_plate_temp": ["75"],
|
||||
"hot_plate_temp_initial_layer": ["75"],
|
||||
"inherits": "Flashforge Generic PETG-CF10",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG-CF @FF AD5X",
|
||||
"compatible_printers": ["Flashforge AD5X 0.4 nozzle"],
|
||||
"nozzle_temperature": ["240"],
|
||||
"textured_plate_temp": ["75"],
|
||||
"textured_plate_temp_initial_layer": ["75"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["0"],
|
||||
"close_fan_the_first_x_layers": ["3"],
|
||||
"complete_print_exhaust_fan_speed": ["40"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"fan_cooling_layer_time": ["20"],
|
||||
"fan_max_speed": ["65"],
|
||||
"fan_min_speed": ["30"],
|
||||
"filament_cost": ["25"],
|
||||
"filament_density": ["1.28"],
|
||||
"filament_flow_ratio": ["0.92"],
|
||||
"filament_load_time": ["29"],
|
||||
"filament_max_volumetric_speed": ["22"],
|
||||
"filament_minimal_purge_on_wipe_tower": ["15"],
|
||||
"filament_settings_id": ["Flashforge PETG-CF @FF G4P 0.6 nozzle"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material:PETG"
|
||||
],
|
||||
"filament_unload_time": ["29"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.6 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG-CF @G3U 0.6 Nozzle",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG-CF @FF G4P 0.6 nozzle",
|
||||
"nozzle_temperature": ["240"],
|
||||
"nozzle_temperature_initial_layer": ["245"],
|
||||
"nozzle_temperature_range_high": ["265"],
|
||||
"nozzle_temperature_range_low": ["220"],
|
||||
"overhang_fan_speed": ["100"],
|
||||
"slow_down_layer_time": ["10"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"additional_cooling_fan_speed": ["40"],
|
||||
"complete_print_exhaust_fan_speed": ["50"],
|
||||
"during_print_exhaust_fan_speed": ["40"],
|
||||
"filament_flow_ratio": ["0.91"],
|
||||
"filament_settings_id": ["Flashforge PETG-CF @FF G4P"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode \n;right_extruder_material:PETG-CF"
|
||||
],
|
||||
"filament_type": ["PETG-CF"],
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": ["Flashforge Guider4 Pro 0.4 nozzle"],
|
||||
"hot_plate_temp": ["80"],
|
||||
"hot_plate_temp_initial_layer": ["80"],
|
||||
"inherits": "Flashforge Generic PETG",
|
||||
"is_custom_defined": "0",
|
||||
"name": "Flashforge PETG-CF @FF G4P",
|
||||
"nozzle_temperature": ["230"],
|
||||
"nozzle_temperature_initial_layer": ["230"],
|
||||
"overhang_fan_speed": ["90"],
|
||||
"pressure_advance": ["0.035"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"version": "2.1.1.0"
|
||||
}
|
||||
@@ -1,33 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "FFF01",
|
||||
"setting_id": "FFFP01",
|
||||
"name": "Flashforge PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_vendor": ["Flashforge"],
|
||||
"filament_flow_ratio": ["1.09"],
|
||||
"filament_max_volumetric_speed": ["20"],
|
||||
"hot_plate_temp_initial_layer": ["50"],
|
||||
"hot_plate_temp": ["50"],
|
||||
"slow_down_layer_time": ["6"],
|
||||
"slow_down_min_speed": ["20"],
|
||||
"support_material_interface_fan_speed": ["100"],
|
||||
"additional_cooling_fan_speed": ["100"],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n;right_extruder_material: PLA\n"
|
||||
],
|
||||
"filament_end_gcode": ["; filament end gcode\n"],
|
||||
"filament_diameter": ["1.75"],
|
||||
"enable_pressure_advance": ["1"],
|
||||
"pressure_advance": ["0.00"],
|
||||
"nozzle_temperature_initial_layer": ["210"],
|
||||
"nozzle_temperature": ["210"],
|
||||
"nozzle_temperature_range_high": ["230"],
|
||||
"nozzle_temperature_range_low": ["190"],
|
||||
"compatible_printers": [
|
||||
"Flashforge Adventurer 3 Series 0.4 Nozzle",
|
||||
"Flashforge Adventurer 3 Series 0.6 Nozzle"
|
||||
]
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user