Creality K2 Plus Filament Profile Updates (#15237)

* Increase max volumetric speed for CR-ABS filament

* Update filament settings for CR-PETG profile

* Increase max volumetric speed from 16 to 18

* Increase max volumetric speed from 16 to 18

* Increase max volumetric speed for CR-PLA Matte

* Adjust filament temperature and speed settings

* Update filament settings for ENDER FAST PLA profile

* Modify pressure advance and filament load settings

* Adjust filament cost, speeds, and pressure advance

Updated filament settings for Hyper PETG @K2 Plus.

* Update filament cost and pressure advance values

* Increase max volumetric speed from 10 to 14

* Enable pressure advance in filament profile

---------

Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>

resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"14"
 	],
 	"filament_density": [
-		"1.23"
+		"1.24"
 	],
 	"filament_flow_ratio": [
 		"0.95"
@@ -49,10 +49,10 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -67,10 +67,10 @@
 		"70"
 	],
 	"nozzle_temperature": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_initial_layer": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_range_high": [
 		"270"
@@ -79,7 +79,7 @@
 		"220"
 	],
 	"overhang_fan_speed": [
-		"90"
+		"100"
 	],
 	"overhang_fan_threshold": [
 		"25%"
@@ -94,7 +94,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"80"
+		"60"
 	],
 	"textured_plate_temp": [
 		"70"

resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"10"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -100,10 +100,10 @@
 		"50"
 	],
 	"nozzle_temperature": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_range_high": [
 		"240"

resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -155,7 +155,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.05",
+	"pressure_advance": "0.04",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json

@@ -58,7 +58,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"14"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"40"
 	],
 	"filament_cost": [
-		"24.99"
+		"25"
 	],
 	"filament_density": [
 		"1.28"
@@ -52,13 +52,13 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"23"
 	],
 	"filament_retract_before_wipe": [
 		"100"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -97,7 +97,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"74.3"
+		"75"
 	],
 	"textured_plate_temp": [
 		"70"
@@ -136,7 +136,7 @@
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
-	"pressure_advance": "0.07",
+	"pressure_advance": "0.05",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json

@@ -31,7 +31,7 @@
 		"50"
 	],
 	"filament_cost": [
-		"30"
+		"20"
 	],
 	"filament_deretraction_speed": [
 		"nil"
@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"21"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -146,7 +146,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.04",
+	"pressure_advance": "0.044",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",