Merge remote-tracking branch 'upstream/main' into dev/cut-keep-paint

localization/i18n/OrcaSlicer.pot

@@ -13121,6 +13121,9 @@ msgstr ""
 msgid "Contour"
 msgstr ""
 
+msgid "Hole"
+msgstr ""
+
 msgid "Contour and hole"
 msgstr ""
 
@@ -14209,7 +14212,10 @@ msgstr ""
 msgid "Raft contact Z distance"
 msgstr ""
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
 
 msgid "Raft expansion"
@@ -14980,13 +14986,16 @@ msgstr ""
 msgid "Top Z distance"
 msgstr ""
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
 
 msgid "Bottom Z distance"
 msgstr ""
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
 
 msgid "Support/raft base"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -15232,6 +15232,9 @@ msgstr "Només pintat"
 msgid "Contour"
 msgstr "Contorn"
 
+msgid "Hole"
+msgstr "Forat"
+
 msgid "Contour and hole"
 msgstr "Contorn i forat"
 
@@ -16644,10 +16647,14 @@ msgstr "Model d'impressora"
 msgid "Raft contact Z distance"
 msgstr "Distància Z de contacte de la Vora d'Adherència"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Distància Z entre l'objecte i la Vora d'Adherència. S'ignorarà per a "
+"Espai Z entre la vora d'Adherència i l'objecte. "
-"interfície soluble"
+"Si la distància Z superior del suport és 0, aquest valor s'ignora i l'objecte "
+"s'imprimeix en contacte directe amb la vora d'Adherència (sense espai)."
 
 msgid "Raft expansion"
 msgstr "Expansió de la Vora d'Adherència"
@@ -17628,14 +17635,20 @@ msgstr "Ignora els voladissos petits que possiblement no requereixen suport."
 msgid "Top Z distance"
 msgstr "Distància Z superior"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "La distància z entre la interfície de suport superior i l'objecte"
+msgstr "Espai Z entre la part superior del suport i l'objecte."
 
 msgid "Bottom Z distance"
 msgstr "Distància Z inferior"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "La distància z entre la interfície de suport inferior i l'objecte"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Espai Z entre l'objecte i la part inferior del suport. "
+"Si la distància Z superior del suport és 0 i la part inferior té capes d'interfície, aquest "
+"valor s'ignora i el suport s'imprimeix en contacte directe amb l'objecte (sense espai)."
 
 msgid "Support/raft base"
 msgstr "Base del Suport/Vora d'Adherència"

localization/i18n/cs/OrcaSlicer_cs.po

@@ -14821,6 +14821,9 @@ msgstr "Painted only"
 msgid "Contour"
 msgstr "Obrys"
 
+msgid "Hole"
+msgstr "Otvor"
+
 msgid "Contour and hole"
 msgstr "Obrys a otvor"
 
@@ -16178,9 +16181,14 @@ msgstr "Varianta tiskárny"
 msgid "Raft contact Z distance"
 msgstr "Z vzdálenost kontaktu raftu"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Z mezera mezi objektem a raftem. Ignorováno pro rozpustitelné rozhraní."
+"Z mezera mezi raftem a objektem. "
+"Pokud je Horní Z vzdálenost podpory 0, tato hodnota se ignoruje "
+"a objekt se tiskne v přímém kontaktu s raftem (bez mezery)."
 
 msgid "Raft expansion"
 msgstr "Rozšíření raftu"
@@ -17131,14 +17139,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Horní vzdálenost v ose Z"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr "Z mezera mezi horním rozhraním podpory a objektem."
 
 msgid "Bottom Z distance"
 msgstr "Spodní vzdálenost v ose Z"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Z mezera mezi spodním rozhraním podpory a objektem."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z mezera mezi spodním rozhraním podpory a objektem. "
+"Pokud je Horní Z vzdálenost podpory 0 a spodek má vrstvy rozhraní, tato hodnota "
+"se ignoruje a podpora se tiskne v přímém kontaktu s objektem (bez mezery)."
 
 msgid "Support/raft base"
 msgstr "Podpora/základ raftu"

localization/i18n/de/OrcaSlicer_de.po

@@ -15357,6 +15357,9 @@ msgstr "Nur lackiert"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Loch"
+
 msgid "Contour and hole"
 msgstr "Kontur und Loch"
 
@@ -16764,9 +16767,14 @@ msgstr "Druckervariante"
 msgid "Raft contact Z distance"
 msgstr "Z Abstand Objekt Druckbasis "
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Z-Abstand zwischen Objekt und Druckbasis. Bei löslicher Oberfläche ignoriert"
+"Z-Abstand zwischen Druckbasis (Raft) und Objekt. "
+"Wenn der obere Z-Abstand der Stützen ist 0, wird dieser Wert ignoriert und das "
+"Objekt wird in direktem Kontakt mit der Druckbasis (Raft) gedruckt (kein Abstand)."
 
 msgid "Raft expansion"
 msgstr "Druckbasis Erweiterung"
@@ -17741,14 +17749,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Oberer Z-Abstand"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "Der Z-Abstand zwischen der oberen Stütz-Schnittstelle und dem Objekt"
+msgstr "Z-Abstand zwischen der Oberseite der Stützen und dem Objekt."
 
 msgid "Bottom Z distance"
 msgstr "Unterer Z-Abstand"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Der Z-Abstand zwischen der unteren Stütz-Schnittstelle und dem Objekt"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z-Abstand zwischen dem Objekt und der Unterseite der Stützen. "
+"Wenn der obere Z-Abstand der Stützen ist 0 und die Unterseite Schnittstellenschichten hat, wird dieser "
+"Wert ignoriert und die Stützen werden in direktem Kontakt mit dem Objekt gedruckt (kein Abstand)."
 
 msgid "Support/raft base"
 msgstr "Stütz-/Basis-Objekt"

localization/i18n/en/OrcaSlicer_en.po

@@ -13403,6 +13403,9 @@ msgstr ""
 msgid "Contour"
 msgstr ""
 
+msgid "Hole"
+msgstr ""
+
 msgid "Contour and hole"
 msgstr ""
 
@@ -14524,10 +14527,13 @@ msgstr ""
 msgid "Raft contact Z distance"
 msgstr ""
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"This is the Z gap between an object and a raft. It is ignored for soluble "
+"Z gap between raft and object. If Support Top Z Distance is 0, this value "
-"interfaces."
+"is ignored and the object is printed in direct contact with the raft (no gap)."
 
 msgid "Raft expansion"
 msgstr ""
@@ -15322,14 +15328,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr ""
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "This determines the Z gap between top support interfaces and objects."
+msgstr "Z gap between the support's top and object."
 
 msgid "Bottom Z distance"
 msgstr ""
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 
 msgid "Support/raft base"
 msgstr ""

localization/i18n/es/OrcaSlicer_es.po

@@ -15294,6 +15294,9 @@ msgstr "Solo pintado"
 msgid "Contour"
 msgstr "Contorno"
 
+msgid "Hole"
+msgstr "Orificio"
+
 msgid "Contour and hole"
 msgstr "Contorno y orificio"
 
@@ -16710,10 +16713,14 @@ msgstr "Variante de la impresora"
 msgid "Raft contact Z distance"
 msgstr "Distancia Z de contacto de la balsa (base de impresión)"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Espacio Z entre el objeto y la balsa (base de impresión). Se ignora con una "
+"Espacio Z entre el objeto y la balsa (base de impresión). "
-"interfaz soluble."
+"Si la distancia Z superior del soporte es 0, este valor se ignora y el "
+"objeto se imprime en contacto directo con la balsa (sin separación)."
 
 msgid "Raft expansion"
 msgstr "Expansión de la balsa (base de impresión)"
@@ -17701,14 +17708,20 @@ msgstr "Ignorar pequeños voladizos que posiblemente no requieran soporte."
 msgid "Top Z distance"
 msgstr "Distancia Z superior"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr "La distancia z entre la interfaz de soporte superior y el objeto."
 
 msgid "Bottom Z distance"
 msgstr "Distancia Z inferior"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "La distancia z entre la interfaz de apoyo inferior y el objeto."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"La distancia z entre la interfaz de apoyo inferior y el objeto. "
+"Si la distancia Z superior del soporte es 0 y la base tiene capas de interfaz, este valor "
+"se ignora y el soporte se imprime en contacto directo con el objeto (sin separación)."
 
 msgid "Support/raft base"
 msgstr "Capa base/balsa"

localization/i18n/fr/OrcaSlicer_fr.po

@@ -15433,6 +15433,9 @@ msgstr "Peint uniquement"
 msgid "Contour"
 msgstr "Contour"
 
+msgid "Hole"
+msgstr "Trou"
+
 msgid "Contour and hole"
 msgstr "Contour et trou"
 
@@ -16869,8 +16872,14 @@ msgstr "Variante de l’imprimante"
 msgid "Raft contact Z distance"
 msgstr "Distance Z de contact du radeau"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "Écart en Z entre l'objet et le radeau. Ignoré pour l'interface soluble"
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Écart Z entre le radeau et l'objet. "
+"Si la distance Z supérieure du support est 0, cette valeur est ignorée "
+"et l'objet est imprimé en contact direct avec le radeau (sans écart)."
 
 msgid "Raft expansion"
 msgstr "Agrandissement du radeau"
@@ -17867,14 +17876,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Distance Z supérieure"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "L'écart z entre l'interface de support supérieure et l'objet"
+msgstr "Écart Z entre le haut du support et l'objet."
 
 msgid "Bottom Z distance"
 msgstr "Distance Z inférieure"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "L'écart Z entre l'interface du support inférieur et l'objet"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Écart Z entre l'objet et le bas du support. "
+"Si la distance Z supérieure du support est 0 et que le bas a des couches d'interface, cette "
+"valeur est ignorée et le support est imprimé en contact direct avec l'objet (sans écart)."
 
 msgid "Support/raft base"
 msgstr "Support/base du radeau"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -15122,6 +15122,9 @@ msgstr "Csak festett"
 msgid "Contour"
 msgstr "Kontúr"
 
+msgid "Hole"
+msgstr "Lyuk"
+
 msgid "Contour and hole"
 msgstr "Kontúr és lyuk"
 
@@ -16517,10 +16520,14 @@ msgstr "Nyomtató változat"
 msgid "Raft contact Z distance"
 msgstr "Tutaj érintkezési Z-távolság"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"This is the Z gap between an object and a raft. It is ignored for soluble "
+"Z rés a tutaj és a tárgy között. "
-"interfaces."
+"Ha a támasz felső Z-távolsága 0, ez az érték figyelmen kívül lesz "
+"hagyva és a tárgy közvetlenül a tutajon kerül nyomtatásra (rés nélkül)."
 
 msgid "Raft expansion"
 msgstr "Tutaj kibővítése"
@@ -17507,19 +17514,24 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Z távolság"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Meghatározza a Z távolságot a felső támasz érintkező rétege és az objektum "
+"Z rés a támasz teteje és a tárgy között."
-"között."
 
 msgid "Bottom Z distance"
 msgstr "Alsó Z távolság"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "A Z távolság az alsó támasz érintkező rétege és az objektum között."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z rés a tárgy és a támasz alja között. "
+"Ha a támasz felső Z-távolsága 0 és az alján vannak interfész rétegek, ez az érték "
+"figyelmen kívül lesz hagyva, és a támasz közvetlenül a tárgyhoz lesz nyomtatva (rés nélkül)."
 
 msgid "Support/raft base"
-msgstr "Támaszték/tutaj alap"
+msgstr "Támasz/tutaj alap"
 
 msgid ""
 "Filament to print support base and raft. \"Default\" means no specific "
@@ -17555,7 +17567,7 @@ msgstr ""
 "letiltva."
 
 msgid "Support/raft interface"
-msgstr "Támaszték/tutaj csatlakozófelület"
+msgstr "Támasz/tutaj interfész"
 
 msgid ""
 "Filament to print support interface. \"Default\" means no specific filament "

localization/i18n/it/OrcaSlicer_it.po

@@ -15319,6 +15319,9 @@ msgstr "Solo verniciato"
 msgid "Contour"
 msgstr "Contorno"
 
+msgid "Hole"
+msgstr "Foro"
+
 msgid "Contour and hole"
 msgstr "Contorno e foro"
 
@@ -16745,10 +16748,14 @@ msgstr "Variante stampante"
 msgid "Raft contact Z distance"
 msgstr "Distanza Z di contatto zattera"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Indica lo spazio Z tra oggetto e zattera. Viene ignorato per le interfacce "
+"Spazio Z tra zattera e oggetto. "
-"di supporto solubili."
+"Se la distanza Z superiore del supporto è 0, questo valore viene ignorato e "
+"l'oggetto viene stampato a contatto diretto con la zattera (senza spazio)."
 
 msgid "Raft expansion"
 msgstr "Espansione della zattera"
@@ -17742,16 +17749,21 @@ msgstr "Ignora i piccoli sbalzi che potrebbero non richiedere supporto."
 msgid "Top Z distance"
 msgstr "Distanza Z superiore"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Determina lo spazio Z tra l'interfaccia di supporto superiore e l'oggetto."
+"Spazio Z tra la parte superiore del supporto e l'oggetto."
 
 msgid "Bottom Z distance"
 msgstr "Distanza Z inferiore"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
-"Determina lo spazio Z tra l'interfaccia di supporto inferiore e l'oggetto."
+"Spazio Z tra l'oggetto e la base del supporto. "
+"Se la distanza Z superiore del supporto è 0 e la base ha strati di interfaccia, questo valore "
+"viene ignorato e il supporto viene stampato a contatto diretto con l'oggetto (senza spazio)."
 
 msgid "Support/raft base"
 msgstr "Base supporto/zattera"

localization/i18n/ja/OrcaSlicer_ja.po

@@ -14093,6 +14093,9 @@ msgstr "塗装のみ"
 msgid "Contour"
 msgstr "輪郭"
 
+msgid "Hole"
+msgstr "穴"
+
 msgid "Contour and hole"
 msgstr "輪郭と穴"
 
@@ -15231,10 +15234,14 @@ msgstr "プリンターバリエーション"
 msgid "Raft contact Z distance"
 msgstr "ラフト接触面Z間隔"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"ラフトとオブジェクトのZ方向の間隔。可溶性材料を使用する場合この設定が無効で"
+"ラフトとオブジェクトの間のZ隙間。"
-"す。"
+"サポート上面Z距離が0の場合、この値は無視され、"
+"オブジェクトはラフトに直接接触して印刷されます（隙間なし）。"
 
 msgid "Raft expansion"
 msgstr "ラフト拡張"
@@ -16043,14 +16050,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "トップ面とのZ間隔"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "サポート接触面とオブジェクトのZ方向の間隔"
+msgstr "サポート上面とオブジェクトの間のZ隙間。"
 
 msgid "Bottom Z distance"
 msgstr "底面とのZ間隔"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "サポート底面とオブジェクトのZ方向間隔"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"オブジェクトとサポート下面の間のZ隙間。"
+"サポート上面Z距離が0で、下面にインターフェース層がある場合、"
+"この値は無視され、サポートはオブジェクトに直接接触して印刷されます（隙間なし）。"
 
 msgid "Support/raft base"
 msgstr ""

localization/i18n/ko/OrcaSlicer_ko.po

@@ -14240,6 +14240,9 @@ msgstr "도색만"
 msgid "Contour"
 msgstr "윤곽"
 
+msgid "Hole"
+msgstr "구멍"
+
 msgid "Contour and hole"
 msgstr "윤곽 및 구멍"
 
@@ -15506,8 +15509,14 @@ msgstr "프린터 변형"
 msgid "Raft contact Z distance"
 msgstr "라프트 접점 Z 거리"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "객체와 라프트 사이의 Z 거리. 가용성 재료의 접점은 무시됨"
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"래프트와 객체 사이의 Z 간격. "
+"서포트 상단 Z 거리가 0이면 이 값은 무시되고 "
+"객체는 래프트에 직접 접촉하여 출력됩니다(간격 없음)."
 
 msgid "Raft expansion"
 msgstr "라프트 확장"
@@ -16423,14 +16432,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "상단 Z 거리"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "서포트 상단과 객체 접점의 간격"
+msgstr "서포트 상단과 객체 사이의 Z 간격."
 
 msgid "Bottom Z distance"
 msgstr "하단 Z 거리"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "서포트 하단과 객체 접점의 간격"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"객체와 서포트 하단 사이의 Z 간격. "
+"서포트 상단 Z 거리가 0이고 하단에 인터페이스 레이어가 있으"
+"면 이 값은 무시되고 서포트가 객체에 직접 접촉하여 출력됩니다(간격 없음)."
 
 msgid "Support/raft base"
 msgstr "서포트/라프트 기본"

localization/i18n/lt/OrcaSlicer_lt.po

@@ -15043,6 +15043,9 @@ msgstr "Tik dažytas"
 msgid "Contour"
 msgstr "Kontūras"
 
+msgid "Hole"
+msgstr "Skylė"
+
 msgid "Contour and hole"
 msgstr "Kontūras ir skylė"
 
@@ -16432,10 +16435,14 @@ msgstr "Spausdintuvo variantas"
 msgid "Raft contact Z distance"
 msgstr "Platformos kontakto Z atstumas"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Z tarpas tarp objekto ir platformos. Į jį neatsižvelgiama tirpių sąsajų "
+"Z tarpas tarp platformos ir objekto. "
-"atveju."
+"Jei viršutinis atramos Z atstumas yra 0, ši reikšmė ignoruojama ir "
+"objektas spausdinamas tiesiogiai kontaktuojant su platforma (be tarpo)."
 
 msgid "Raft expansion"
 msgstr "Platformos išplėtimas"
@@ -17405,14 +17412,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Viršutinis Z atstumas"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "Taip nustatomas Z tarpas tarp viršutinių atramų sąsajų ir objektų."
+msgstr "Z tarpas tarp atramos viršaus ir objekto."
 
 msgid "Bottom Z distance"
 msgstr "Apatinis Z atstumas"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Z tarpas tarp apatinės atramos sąsajos ir objekto."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z tarpas tarp objekto ir atramos apačios. "
+"Jei viršutinis atramos Z atstumas yra 0 ir apačioje yra sąsajos sluoksniai, ši reikšmė "
+"ignoruojama ir atrama spausdinama tiesiogiai kontaktuojant su objektu (be tarpo)."
 
 msgid "Support/raft base"
 msgstr "Atraminis ir (arba) platformos pagrindas"

localization/i18n/nl/OrcaSlicer_nl.po

@@ -15043,6 +15043,9 @@ msgstr "Alleen geverfd"
 msgid "Contour"
 msgstr "Contour"
 
+msgid "Hole"
+msgstr "Gat"
+
 msgid "Contour and hole"
 msgstr "Contour en gat"
 
@@ -16426,10 +16429,14 @@ msgstr "Printervariant"
 msgid "Raft contact Z distance"
 msgstr "Vlot (raft) contact Z afstand:"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Dit is de Z-afstand tussen een object en een raft. Het wordt genegeerd voor "
+"Z-gap tussen het vlot en het object. "
-"oplosbare materialen."
+"Als de bovenste Z-afstand van de ondersteuning 0 is, wordt deze waarde "
+"genegeerd en wordt het object direct in contact met het vlot geprint (geen gap)."
 
 msgid "Raft expansion"
 msgstr "Vlot (raft) expansie"
@@ -17404,15 +17411,21 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Top Z afstand"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Dit bepaald de Z-afstand tussen de bovenste support interfaces en het object."
+"Z-gap tussen de bovenkant van de ondersteuning en het object."
 
 msgid "Bottom Z distance"
 msgstr "Onderste Z-afstand"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "De z-opening tussen de onderste ondersteuningsinterface en het object"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z-gap tussen het object en de onderkant van de ondersteuning. "
+"Als de bovenste Z-afstand van de ondersteuning 0 is en de onderkant interfacerlagen heeft, wordt "
+"deze waarde genegeerd en wordt de ondersteuning direct in contact met het object geprint (geen gap)."
 
 msgid "Support/raft base"
 msgstr "Support/raft base"

localization/i18n/pl/OrcaSlicer_pl.po

@@ -14539,6 +14539,9 @@ msgstr "Tylko malowane"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Otwory"
+
 msgid "Contour and hole"
 msgstr "Kontur i otwory"
 
@@ -15873,10 +15876,14 @@ msgstr "Wariant drukarki"
 msgid "Raft contact Z distance"
 msgstr "Odległość Z kontaktu z tratwą"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Dystans między modelem, a raftem, mierzony w poziomie. Ignorowany dla "
+"Odstęp Z między tratwą a obiektem. "
-"rozpuszczalnych warstw łączących"
+"Jeśli górny odstęp Z podpór wynosi 0, ta wartość jest ignorowana i "
+"obiekt jest drukowany w bezpośrednim kontakcie z tratwą (bez odstępu)."
 
 msgid "Raft expansion"
 msgstr "Rozszerzenie tratwy"
@@ -16843,14 +16850,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Odstęp góry w osi Z"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "Odstęp osi Z między górną warstwą łączącą podporę z obiektem"
+msgstr "Odstęp Z między górą podpór a obiektem."
 
 msgid "Bottom Z distance"
 msgstr "Odstęp spodu w osi Z"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Odległość w osi Z między dolną warstwą łączącyą a obiektem"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Odstęp Z między obiektem a dołem podpór. "
+"Jeśli górny odstęp Z podpór wynosi 0 i dół ma warstwy interfejsu, ta wartość jest "
+"ignorowana, a podpory są drukowane w bezpośrednim kontakcie z obiektem (bez odstępu)."
 
 msgid "Support/raft base"
 msgstr "Podstawa podpory/tratwy"

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -15186,6 +15186,9 @@ msgstr "Somente pintado"
 msgid "Contour"
 msgstr "Contorno"
 
+msgid "Hole"
+msgstr "Furo"
+
 msgid "Contour and hole"
 msgstr "Contorno e furo"
 
@@ -16593,8 +16596,14 @@ msgstr "Variante da impressora"
 msgid "Raft contact Z distance"
 msgstr "Distância Z de contato da jangada"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "Vão Z entre o objeto e a jangada. Ignorado para interface solúvel."
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Espaço Z entre a balsa e o objeto. "
+"Se a Distância Z Superior do Suporte for 0, este valor é ignorado "
+"e o objeto é impresso em contato direto com a balsa (sem espaço)."
 
 msgid "Raft expansion"
 msgstr "Expansão da jangada"
@@ -17572,14 +17581,20 @@ msgstr "Ignorar pequenas saliências que possivelmente não requerem suporte."
 msgid "Top Z distance"
 msgstr "Distância Z superior"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "O vão Z entre a interface superior de suporte e o objeto."
+msgstr "Espaço Z entre o topo do suporte e o objeto."
 
 msgid "Bottom Z distance"
 msgstr "Distância Z inferior"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "O vão Z entre a interface inferior de suporte e o objeto."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Espaço Z entre o objeto e a base do suporte. "
+"Se a Distância Z Superior do Suporte for 0 e a base tiver camadas de interface, este "
+"valor é ignorado e o suporte é impresso em contato direto com o objeto (sem espaço)."
 
 msgid "Support/raft base"
 msgstr "Base de suporte/jangada"

localization/i18n/ru/OrcaSlicer_ru.po

@@ -15501,6 +15501,9 @@ msgstr "Вручную"
 msgid "Contour"
 msgstr "Контур"
 
+msgid "Hole"
+msgstr "Отверстия"
+
 msgid "Contour and hole"
 msgstr "Контур и отверстия"
 
@@ -16954,10 +16957,14 @@ msgstr "Модификация принтера"
 msgid "Raft contact Z distance"
 msgstr "Зазор под моделью"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Вертикальное расстояние между подложкой и моделью. Значение игнорируется при "
+"Вертикальное расстояние между подложкой и моделью. "
-"выборе растворимого материала."
+"Если зазор поддержки сверху равен 0, это значение игнорируется, "
+"и модель печатается в прямом контакте с подложкой (без зазора)."
 
 msgid "Raft expansion"
 msgstr "Расширение подложки"
@@ -18047,16 +18054,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Зазор поддержки сверху"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr ""
+msgstr "Вертикальное расстояние между связующим слоем поддержки сверху и моделью."
-"Вертикальное расстояние между связующим слоем поддержки сверху и моделью."
 
 msgid "Bottom Z distance"
 msgstr "Зазор поддержки снизу"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
 msgstr ""
 "Вертикальное расстояние между связующим слоем поддержки снизу и моделью. "
+"Если зазор поддержки сверху равен 0 и снизу есть интерфейсные слои, это значение "
+"игнорируется, и поддержка печатается в прямом контакте с моделью (без зазора)."
 
 msgid "Support/raft base"
 msgstr "Поддержка/подложка"

localization/i18n/sv/OrcaSlicer_sv.po

@@ -14883,6 +14883,9 @@ msgstr "Endast målad"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Hål"
+
 msgid "Contour and hole"
 msgstr "Kontur och hål"
 
@@ -16255,10 +16258,14 @@ msgstr "Printer variant"
 msgid "Raft contact Z distance"
 msgstr "Raft kontakt Z avstånd"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Där finns Z mellanrum mellan ett objekt och en raft. Detta ignoreras för "
+"Z-gapet mellan raften och objektet. "
-"lösliga gränssnitt"
+"Om Topp Z-distans är 0 ignoreras detta värde och objektet "
+"skrivs ut i direkt kontakt med raften (utan mellanrum)."
 
 msgid "Raft expansion"
 msgstr "Raft expansion"
@@ -17219,15 +17226,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Topp Z-distans"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
 msgstr ""
-"Detta bestämmer Z-avståndet mellan det övre support gränssnittet och objektet"
+"Z-gapet mellan supportens topp och objektet."
 
 msgid "Bottom Z distance"
 msgstr "Nedre Z-avstånd"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Z-gapet mellan botten support och objektets anläggningsyta"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr "Z-gapet mellan objektet och supportens botten. "
+"Om Topp Z-distans är 0 och botten har gränssnittslager ignoreras detta "
+"värde och supporten skrivs ut i direkt kontakt med objektet (utan mellanrum)."
 
 msgid "Support/raft base"
 msgstr "Support/raft bas"

localization/i18n/tr/OrcaSlicer_tr.po

@@ -13339,6 +13339,9 @@ msgstr "Sadece boyalı"
 msgid "Contour"
 msgstr "Kontur"
 
+msgid "Hole"
+msgstr "Delik"
+
 msgid "Contour and hole"
 msgstr "Kontur ve delik"
 
@@ -14487,8 +14490,14 @@ msgstr "Yazıcı çeşidi"
 msgid "Raft contact Z distance"
 msgstr "Raft kontak Z mesafesi"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "Nesne ve raft arasındaki Z boşluğu. Çözünür arayüz için göz ardı edildi."
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Sal ile nesne arasındaki Z boşluğu. "
+"Destek üst Z mesafesi 0 ise bu değer yok sayılır ve nesne "
+"sal ile doğrudan temas halinde basılır (boşluk yok)."
 
 msgid "Raft expansion"
 msgstr "Raft genişletme"
@@ -15271,14 +15280,20 @@ msgstr "Muhtemelen destek gerektirmeyen küçük çıkıntıları göz ardı edi
 msgid "Top Z distance"
 msgstr "Üst z mesafesi"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "Üst destek arayüzü ile nesne arasındaki z boşluğu."
+msgstr "Desteğin üstü ile nesne arasındaki Z boşluğu."
 
 msgid "Bottom Z distance"
 msgstr "Alt z mesafesi"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Alt destek arayüzü ile nesne arasındaki z boşluğu."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Nesne ile destek altı arasındaki Z boşluğu. "
+"Destek üst Z mesafesi 0 ise ve altta arayüz katmanları varsa bu değer yok "
+"sayılır ve destek nesneyle doğrudan temas halinde basılır (boşluk yok)."
 
 msgid "Support/raft base"
 msgstr "Destek/raft tabanı"

localization/i18n/uk/OrcaSlicer_uk.po

@@ -14536,6 +14536,9 @@ msgstr "Тільки пофарбовані"
 msgid "Contour"
 msgstr "Контур"
 
+msgid "Hole"
+msgstr "Отвір"
+
 msgid "Contour and hole"
 msgstr "Контур та отвір"
 
@@ -15865,9 +15868,14 @@ msgstr "Варіант принтера"
 msgid "Raft contact Z distance"
 msgstr "Відстань Z контакту підкладки"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
 msgstr ""
-"Зазор Z між об'єктом та підкладкою. Ігнорується для розчинного інтерфейсу"
+"Z-зазор між підкладкою та моделлю. "
+"Якщо верхній Z-зазор підтримки дорівнює 0, це значення ігнорується, "
+"і модель друкується в прямому контакті з підкладкою (без зазору)."
 
 msgid "Raft expansion"
 msgstr "Розширення підкладки"
@@ -16820,14 +16828,20 @@ msgstr ""
 msgid "Top Z distance"
 msgstr "Верхня відстань Z"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "Зазор осі z між верхом підтримки та об'єктом"
+msgstr "Z-зазор між верхом підтримки та моделлю."
 
 msgid "Bottom Z distance"
 msgstr "Нижня відстань Z"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Зазор осі z між низом підтримки та об'єктом"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Z-зазор між моделлю та нижньою частиною підтримки. "
+"Якщо верхній Z-зазор підтримки дорівнює 0 і знизу є інтерфейсні шари, це значення "
+"ігнорується, і підтримка друкується в прямому контакті з моделлю (без зазору)."
 
 msgid "Support/raft base"
 msgstr "База підтримки/підкладки"

localization/i18n/vi/OrcaSlicer_vi.po

@@ -14730,6 +14730,9 @@ msgstr "Chỉ được sơn"
 msgid "Contour"
 msgstr "Đường viền"
 
+msgid "Hole"
+msgstr "Lỗ"
+
 msgid "Contour and hole"
 msgstr "Đường viền và lỗ"
 
@@ -16079,8 +16082,14 @@ msgstr "Biến thể máy in"
 msgid "Raft contact Z distance"
 msgstr "Khoảng cách Z tiếp xúc raft"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "Khe Z giữa đối tượng và raft. Bị bỏ qua cho giao diện hòa tan."
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr ""
+"Khoảng cách Z giữa bè và vật thể. "
+"Nếu khoảng cách Z trên của hỗ trợ bằng 0, giá trị này sẽ bị bỏ qua "
+"và vật thể được in tiếp xúc trực tiếp với bè (không có khe hở)."
 
 msgid "Raft expansion"
 msgstr "Mở rộng raft"
@@ -17021,14 +17030,20 @@ msgstr "Ignore small overhangs that possibly don't require support."
 msgid "Top Z distance"
 msgstr "Khoảng cách Z trên"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "Khe Z giữa giao diện support trên và đối tượng."
+msgstr "Khoảng cách Z giữa mặt trên của hỗ trợ và vật thể."
 
 msgid "Bottom Z distance"
 msgstr "Khoảng cách Z dưới"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "Khe Z giữa giao diện support dưới và đối tượng."
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"Khoảng cách Z giữa vật thể và phần đáy của hỗ trợ. "
+"Nếu khoảng cách Z trên của hỗ trợ bằng 0 và phần đáy có các lớp giao diện, giá trị "
+"này sẽ bị bỏ qua và hỗ trợ được in tiếp xúc trực tiếp với vật thể (không có khe hở)."
 
 msgid "Support/raft base"
 msgstr "Đế support/raft"
@@ -22872,3 +22887,4 @@ msgstr ""
 #, c-format, boost-format
 #~ msgid "*Printing %s material with %s may cause nozzle damage"
 #~ msgstr "*In vật liệu %s với %s có thể gây hư hỏng đầu phun"
+

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -13894,6 +13894,9 @@ msgstr "仅涂漆"
 msgid "Contour"
 msgstr "轮廓"
 
+msgid "Hole"
+msgstr "孔"
+
 msgid "Contour and hole"
 msgstr "轮廓和孔"
 
@@ -15128,8 +15131,11 @@ msgstr "打印机变种"
 msgid "Raft contact Z distance"
 msgstr "筏层Z间距"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "模型和筏层之间的Z间隙"
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr "筏层与模型之间的Z间隙。如果支撑顶部Z距离为0，则忽略该值，模型与筏层直接接触打印（无间隙）。"
 
 msgid "Raft expansion"
 msgstr "筏层扩展"
@@ -15988,14 +15994,19 @@ msgstr "将几乎不需要支撑的微小悬垂忽略掉。"
 msgid "Top Z distance"
 msgstr "顶部Z距离"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "支撑顶部和模型之间的z间隙"
+msgstr "支撑顶部与模型之间的Z间隙。"
 
 msgid "Bottom Z distance"
 msgstr "底部Z距离"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "支撑生成于模型表面时，支撑面底部和模型之间的z间隙"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"模型与支撑底部之间的Z间隙。"
+"如果支撑顶部Z距离为0且底部有界面层，则忽略该值，支撑与模型直接接触打印（无间隙）。"
 
 msgid "Support/raft base"
 msgstr "支撑/筏层主体"

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -4152,7 +4152,7 @@ msgstr ""
 "重設為 0。seam_slope_start_height 必須小於 layer_height。\n"
 "重設為 0。"
 
-#, no-c-format, no-boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "Lock depth should smaller than skin depth.\n"
 "Reset to 50% of skin depth."
@@ -14006,6 +14006,9 @@ msgstr "僅塗漆"
 msgid "Contour"
 msgstr "輪廓"
 
+msgid "Hole"
+msgstr "孔洞"
+
 msgid "Contour and hole"
 msgstr "輪廓和孔"
 
@@ -15260,8 +15263,11 @@ msgstr "列印設備型號"
 msgid "Raft contact Z distance"
 msgstr "筏層 Z 間距"
 
-msgid "Z gap between object and raft. Ignored for soluble interface."
+msgid ""
-msgstr "模型和筏層之間的Z間隙"
+"Z gap between raft and object. "
+"If Support Top Z Distance is 0, this value is ignored and "
+"the object is printed in direct contact with the raft (no gap)."
+msgstr "筏層與模型之間的Z間隙。若支撐頂部Z距離為0，則忽略此值，模型與筏層直接接觸列印（無間隙）。"
 
 msgid "Raft expansion"
 msgstr "筏層擴展"
@@ -16124,14 +16130,19 @@ msgstr "將幾乎不需要支撐的微小懸空忽略掉。"
 msgid "Top Z distance"
 msgstr "頂部 Z 間距"
 
-msgid "The Z gap between the top support interface and object."
+msgid "Z gap between the support's top and object."
-msgstr "支撐頂部和模型之間的 Z 間隙"
+msgstr "支撐頂部與模型之間的Z間隙。"
 
 msgid "Bottom Z distance"
 msgstr "底部 Z 間距"
 
-msgid "The Z gap between the bottom support interface and object."
+msgid ""
-msgstr "支撐產生於模型表面時，支撐面底部和模型之間的 Z 間隙"
+"Z gap between the object and the support bottom. "
+"If Support Top Z Distance is 0 and the bottom has interface layers, this value "
+"is ignored and the support is printed in direct contact with the object (no gap)."
+msgstr ""
+"模型與支撐底部之間的Z間隙。"
+"若支撐頂部Z距離為0且底部有介面層，則忽略此值，支撐與模型直接接觸列印（無間隙）。"
 
 msgid "Support/raft base"
 msgstr "支撐/筏層主體"

resources/printers/N6.json

@@ -0,0 +1,112 @@
+{
+	"00.00.00.00": {
+		"display_name": "Bambu Lab X2D",
+		"print": {
+			"ipcam": {
+				"resolution_supported": [ "1080p" ],
+				"virtual_camera": "enabled",
+				"liveview": {
+					"remote": "tutk"
+				},
+				"file": {
+					"local": "local",
+					"remote": "tutk",
+					"model_download": "enabled"
+				}
+			},
+			"nozzle_temp_range": [ 0, 300 ],
+			"nozzle_replace_wiki": {
+				"zh": "https://wiki.bambulab.com/zh/h2/maintenance/replace-hotend",
+				"en": "https://wiki.bambulab.com/en/h2/maintenance/replace-hotend"
+			},
+			"bed_temp_range": [ 0, 120 ],
+			"support_motor_noise_cali": false,
+			"support_tunnel_mqtt": true,
+			"support_mqtt_alive": true,
+			"support_command_ams_switch": true,
+			"support_ssl_for_mqtt": true,
+			"support_cloud_print_only": false,
+			"support_1080dpi": true,
+			"support_prompt_sound": false,
+			"support_ams_humidity": true,
+			"support_auto_recovery_step_loss": true,
+			"support_bed_leveling": 2,
+			"support_update_remain": true,
+			"support_timelapse": true,
+			"support_filament_backup": true,
+			"support_chamber_fan": true,
+			"support_aux_fan": true,
+			"support_send_to_sd": true,
+			"support_print_all": true,
+			"support_print_without_sd": true,
+			"support_flow_calibration": true,
+			"support_auto_flow_calibration": true,
+			"support_build_plate_marker_detect": true,
+			"support_build_plate_marker_detect_type": 2,
+			"support_lidar_calibration": false,
+			"support_nozzle_offset_calibration": true,
+			"support_high_tempbed_calibration": true,
+			"support_clump_position_calibration": true,
+			"support_ai_monitoring": true,
+			"support_first_layer_inspect": false,
+			"support_save_remote_print_file_to_storage": true,
+			"support_chamber": true,
+			"support_chamber_temp_edit": true,
+			"support_chamber_temp_edit_range": [0, 65],
+			"support_chamber_temp_switch_heating": 40,
+			"support_extrusion_cali": false,
+			"support_user_preset": false,
+			"support_ams_ext_mix_print": true,
+			"support_ams_filament_change_abort": true
+		},
+		"fan" : {
+			"0" :
+			{
+				"mode_name": "Strong Cooling",
+				"2": "Left(Aux)",
+				"10": {
+					"-1": "Right(Aux)",
+					"0": "Right(Aux)",
+					"1": "Right(Filter)"
+				}
+			},
+			"1" :
+			{
+				"mode_name": "Heating",
+				"2": "Left(Heating)",
+				"10": "Right(Filter)"
+			},
+			"special_cooling_text" : "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air."
+		},
+		"model_id": "N6",
+		"subseries": ["N6-V2"],
+		"auto_pa_cali_thumbnail_image": "fd_calibration_auto_n6",
+		"support_wrapping_detection": false,
+		"compatible_machine": [],
+		"printer_type": "N6",
+		"printer_thumbnail_image": "printer_thumbnail_N6",
+		"printer_connect_help_image": "input_access_code_x1",
+		"printer_use_ams_image": "ams_icon",
+		"printer_ext_image": ["ext_image_default"],
+		"use_ams_type": "generic",
+		"printer_arch": "core_xy",
+		"printer_series": "series_x1",
+		"has_cali_line": true,
+		"printer_is_enclosed": true,
+		"enable_set_nozzle_info": false,
+		"support_safety_options": true,
+		"filament_load_image": ["filament_load_n6_series_ext0","filament_load_n6_series_ext1"],
+		"tool_head_display_names": {
+			"0": {
+				"extruder": ["Auxiliary Extruder", "Auxiliary extruder", "auxiliary extruder"],
+				"nozzle":   ["Auxiliary Nozzle",   "Auxiliary nozzle",   "auxiliary nozzle"],
+				"hotend":   ["Auxiliary Hotend",   "Auxiliary hotend",   "auxiliary hotend"]
+			},
+			"1": {
+				"extruder": ["Main Extruder", "Main extruder", "main extruder"],
+				"nozzle":   ["Main Nozzle",   "Main nozzle",   "main nozzle"],
+				"hotend":   ["Main Hotend",   "Main hotend",   "main hotend"]
+			}
+		}
+	}
+}

resources/printers/filaments_blacklist.json

@@ -14,6 +14,24 @@
 			"slot": "ams",
 			"description": "AMS does not support 'Bambu Lab PET-CF'."
 		},
+		{
+			"type": "TPU",
+			"action": "warning",
+			"model_id": [
+				"N6"
+			],
+			"description": "How to feed TPU filament on X2D.",
+			"wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
+		},
+		{
+			"type": "TPU-AMS",
+			"action": "warning",
+			"model_id": [
+				"N6"
+			],
+			"description": "How to feed TPU filament on X2D.",
+			"wiki": "https://e.bambulab.com/t?c=PAxXqQu2zBgvN3ea"
+		},
 		{
 			"type": "TPU",
 			"action": "warning",

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.10",
+	"version": "02.01.00.11",
 	"force_update": "0",
 	"description": "the initial version of BBL configurations",
 	"machine_model_list": [
@@ -48,6 +48,10 @@
 		{
 			"name": "Bambu Lab X1E",
 			"sub_path": "machine/Bambu Lab X1E.json"
+		},
+		{
+			"name": "Bambu Lab X2D",
+			"sub_path": "machine/Bambu Lab X2D.json"
 		}
 	],
 	"process_list": [
@@ -958,6 +962,70 @@
 		{
 			"name": "0.56mm Standard @BBL X1C 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json"
+		},
+		{
+			"name": "0.08mm High Quality @BBL X2D 0.2 nozzle",
+			"sub_path": "process/0.08mm High Quality @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "0.08mm High Quality @BBL X2D",
+			"sub_path": "process/0.08mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.10mm Standard @BBL X2D 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm Balanced Quality @BBL X2D 0.2 nozzle",
+			"sub_path": "process/0.12mm Balanced Quality @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "0.12mm High Quality @BBL X2D",
+			"sub_path": "process/0.12mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.16mm High Quality @BBL X2D",
+			"sub_path": "process/0.16mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.16mm Standard @BBL X2D",
+			"sub_path": "process/0.16mm Standard @BBL X2D.json"
+		},
+		{
+			"name": "0.18mm Balanced Quality @BBL X2D 0.6 nozzle",
+			"sub_path": "process/0.18mm Balanced Quality @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @BBL X2D",
+			"sub_path": "process/0.20mm High Quality @BBL X2D.json"
+		},
+		{
+			"name": "0.20mm Standard @BBL X2D",
+			"sub_path": "process/0.20mm Standard @BBL X2D.json"
+		},
+		{
+			"name": "0.24mm Standard @BBL X2D",
+			"sub_path": "process/0.24mm Standard @BBL X2D.json"
+		},
+		{
+			"name": "0.24mm Balanced Quality @BBL X2D 0.6 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "0.24mm Balanced Quality @BBL X2D 0.8 nozzle",
+			"sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "0.30mm Standard @BBL X2D 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Balanced Quality @BBL X2D 0.8 nozzle",
+			"sub_path": "process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "0.40mm Standard @BBL X2D 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @BBL X2D 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -8680,6 +8748,734 @@
 		{
 			"name": "BETA HIPS @BBL X1C",
 			"sub_path": "filament/BETA/BETA HIPS @BBL X1C.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D",
+			"sub_path": "filament/Bambu ABS @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu ABS @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu ABS-GF @BBL X2D",
+			"sub_path": "filament/Bambu ABS-GF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support for ABS @BBL X2D",
+			"sub_path": "filament/Bambu Support for ABS @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support for ABS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @BBL X2D",
+			"sub_path": "filament/Generic ABS @BBL X2D.json"
+		},
+		{
+			"name": "Generic ABS @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic ABS @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ABS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA @BBL X2D",
+			"sub_path": "filament/Bambu ASA @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ASA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA-Aero @BBL X2D",
+			"sub_path": "filament/Bambu ASA-Aero @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu ASA-CF @BBL X2D",
+			"sub_path": "filament/Bambu ASA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu ASA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @BBL X2D",
+			"sub_path": "filament/Generic ASA @BBL X2D.json"
+		},
+		{
+			"name": "Generic ASA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic ASA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic ASA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic ASA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic BVOH @BBL X2D",
+			"sub_path": "filament/Generic BVOH @BBL X2D.json"
+		},
+		{
+			"name": "Generic BVOH @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic BVOH @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic EVA @BBL X2D",
+			"sub_path": "filament/Generic EVA @BBL X2D.json"
+		},
+		{
+			"name": "Generic EVA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic EVA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic HIPS @BBL X2D",
+			"sub_path": "filament/Generic HIPS @BBL X2D.json"
+		},
+		{
+			"name": "Generic HIPS @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic HIPS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic HIPS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PA-CF @BBL X2D",
+			"sub_path": "filament/Bambu PA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PA6-CF @BBL X2D",
+			"sub_path": "filament/Bambu PA6-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PA6-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PA6-GF @BBL X2D",
+			"sub_path": "filament/Bambu PA6-GF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PA6-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PAHT-CF @BBL X2D",
+			"sub_path": "filament/Bambu PAHT-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PA/PET @BBL X2D",
+			"sub_path": "filament/Bambu Support For PA PET @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support For PA/PET @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support G @BBL X2D",
+			"sub_path": "filament/Bambu Support G @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support G @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support G @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PA @BBL X2D",
+			"sub_path": "filament/Generic PA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PA-CF @BBL X2D",
+			"sub_path": "filament/Generic PA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PC @BBL X2D",
+			"sub_path": "filament/Bambu PC @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PC @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PC @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PC @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PC @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL X2D",
+			"sub_path": "filament/Bambu PC FR @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PC FR @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PC FR @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PC FR @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PC @BBL X2D",
+			"sub_path": "filament/Generic PC @BBL X2D.json"
+		},
+		{
+			"name": "Generic PC @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PC @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PC @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PCTG @BBL X2D",
+			"sub_path": "filament/Generic PCTG @BBL X2D.json"
+		},
+		{
+			"name": "Generic PCTG @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PCTG @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PE @BBL X2D",
+			"sub_path": "filament/Generic PE @BBL X2D.json"
+		},
+		{
+			"name": "Generic PE @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PE @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PE-CF @BBL X2D",
+			"sub_path": "filament/Generic PE-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PE-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PE-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PET-CF @BBL X2D",
+			"sub_path": "filament/Bambu PET-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PET-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL X2D",
+			"sub_path": "filament/Bambu PETG Basic @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Basic @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL X2D",
+			"sub_path": "filament/Bambu PETG HF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG HF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL X2D",
+			"sub_path": "filament/Bambu PETG-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PETG-CF @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @BBL X2D",
+			"sub_path": "filament/Generic PETG @BBL X2D.json"
+		},
+		{
+			"name": "Generic PETG @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PETG @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL X2D",
+			"sub_path": "filament/Generic PETG HF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PETG HF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PETG HF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PETG-CF @BBL X2D",
+			"sub_path": "filament/Generic PETG-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PHA @BBL X2D",
+			"sub_path": "filament/Generic PHA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PHA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PHA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL X2D",
+			"sub_path": "filament/Bambu PLA Aero @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Aero @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL X2D",
+			"sub_path": "filament/Bambu PLA Basic @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Basic @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL X2D",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL X2D",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL X2D",
+			"sub_path": "filament/Bambu PLA Glow @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Glow @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL X2D",
+			"sub_path": "filament/Bambu PLA Lite @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Lite @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL X2D",
+			"sub_path": "filament/Bambu PLA Marble @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Marble @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL X2D",
+			"sub_path": "filament/Bambu PLA Matte @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Matte @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL X2D",
+			"sub_path": "filament/Bambu PLA Metal @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Metal @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL X2D",
+			"sub_path": "filament/Bambu PLA Silk @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL X2D",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Silk+ @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL X2D",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Sparkle @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL X2D",
+			"sub_path": "filament/Bambu PLA Tough @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL X2D",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Tough+ @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.6 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Translucent @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL X2D",
+			"sub_path": "filament/Bambu PLA Wood @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA Wood @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL X2D",
+			"sub_path": "filament/Bambu PLA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PLA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL X2D",
+			"sub_path": "filament/Bambu Support For PLA @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL X2D",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support For PLA/PETG @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Support W @BBL X2D",
+			"sub_path": "filament/Bambu Support W @BBL X2D.json"
+		},
+		{
+			"name": "Bambu Support W @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Support W @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu Support W @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @BBL X2D",
+			"sub_path": "filament/Generic PLA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PLA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL X2D",
+			"sub_path": "filament/Generic PLA High Speed @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA Silk @BBL X2D",
+			"sub_path": "filament/Generic PLA Silk @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PLA-CF @BBL X2D",
+			"sub_path": "filament/Generic PLA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PP @BBL X2D",
+			"sub_path": "filament/Generic PP @BBL X2D.json"
+		},
+		{
+			"name": "Generic PP @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PP @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PP-CF @BBL X2D",
+			"sub_path": "filament/Generic PP-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PP-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PP-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PP-GF @BBL X2D",
+			"sub_path": "filament/Generic PP-GF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PP-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PP-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PPA-CF @BBL X2D",
+			"sub_path": "filament/Bambu PPA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PPA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PPA-CF @BBL X2D",
+			"sub_path": "filament/Generic PPA-CF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PPA-CF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PPA-GF @BBL X2D",
+			"sub_path": "filament/Generic PPA-GF @BBL X2D.json"
+		},
+		{
+			"name": "Generic PPA-GF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu PVA @BBL X2D",
+			"sub_path": "filament/Bambu PVA @BBL X2D.json"
+		},
+		{
+			"name": "Bambu PVA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu PVA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic PVA @BBL X2D",
+			"sub_path": "filament/Generic PVA @BBL X2D.json"
+		},
+		{
+			"name": "Generic PVA @BBL X2D 0.2 nozzle",
+			"sub_path": "filament/Generic PVA @BBL X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Generic PVA @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic PVA @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 85A @BBL X2D",
+			"sub_path": "filament/Bambu TPU 85A @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 85A @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL X2D",
+			"sub_path": "filament/Bambu TPU 90A @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 90A @BBL X2D 0.8 nozzle",
+			"sub_path": "filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A @BBL X2D",
+			"sub_path": "filament/Bambu TPU 95A @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 95A @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL X2D",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU 95A HF @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL X2D",
+			"sub_path": "filament/Bambu TPU for AMS @BBL X2D.json"
+		},
+		{
+			"name": "Bambu TPU for AMS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU @BBL X2D",
+			"sub_path": "filament/Generic TPU @BBL X2D.json"
+		},
+		{
+			"name": "Generic TPU @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Generic TPU for AMS @BBL X2D",
+			"sub_path": "filament/Generic TPU for AMS @BBL X2D.json"
+		},
+		{
+			"name": "Generic TPU for AMS @BBL X2D 0.4 nozzle",
+			"sub_path": "filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json"
 		}
 	],
 	"machine_list": [
@@ -8870,6 +9666,22 @@
 		{
 			"name": "Bambu Lab H2D Pro 0.8 nozzle",
 			"sub_path": "machine/Bambu Lab H2D Pro 0.8 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.4 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.4 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.2 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.2 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.6 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.6 nozzle.json"
+		},
+		{
+			"name": "Bambu Lab X2D 0.8 nozzle",
+			"sub_path": "machine/Bambu Lab X2D 0.8 nozzle.json"
 		}
 	]
 }

resources/profiles/BBL/cli_config.json

@@ -29,7 +29,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab A1 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -41,7 +42,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab A1 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -53,7 +55,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab A1 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -65,7 +68,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -97,7 +101,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab A1 mini 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -108,7 +113,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab A1 mini 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -119,7 +125,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab A1 mini 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -130,7 +137,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -142,7 +150,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab X1 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -150,7 +159,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab X1 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -158,7 +168,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab X1 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -166,7 +177,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -178,7 +190,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -186,7 +199,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -194,7 +208,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab X1 Carbon 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -202,7 +217,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -214,7 +230,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab X1E 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -222,7 +239,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab X1E 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -230,7 +248,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab X1E 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -238,7 +257,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -250,7 +270,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab P1P 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -258,7 +279,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab P1P 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -266,7 +288,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab P1P 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -274,7 +297,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -286,7 +310,8 @@
 					"Bambu Lab H2D 0.2 nozzle",
 					"Bambu Lab H2D Pro 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab P1S 0.4 nozzle": [
 					"Bambu Lab A1 mini 0.4 nozzle",
@@ -294,7 +319,8 @@
 					"Bambu Lab H2D 0.4 nozzle",
 					"Bambu Lab H2D Pro 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab P1S 0.6 nozzle": [
 					"Bambu Lab A1 mini 0.6 nozzle",
@@ -302,7 +328,8 @@
 					"Bambu Lab H2D 0.6 nozzle",
 					"Bambu Lab H2D Pro 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab P1S 0.8 nozzle": [
 					"Bambu Lab A1 mini 0.8 nozzle",
@@ -310,7 +337,8 @@
 					"Bambu Lab H2D 0.8 nozzle",
 					"Bambu Lab H2D Pro 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -325,7 +353,8 @@
 					"Bambu Lab A1 0.2 nozzle",
 					"Bambu Lab A1 mini 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab H2D 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -336,7 +365,8 @@
 					"Bambu Lab A1 0.4 nozzle",
 					"Bambu Lab A1 mini 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab H2D 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -347,7 +377,8 @@
 					"Bambu Lab A1 0.6 nozzle",
 					"Bambu Lab A1 mini 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab H2D 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -358,7 +389,8 @@
 					"Bambu Lab A1 0.8 nozzle",
 					"Bambu Lab A1 mini 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -373,7 +405,8 @@
 					"Bambu Lab A1 0.2 nozzle",
 					"Bambu Lab A1 mini 0.2 nozzle",
 					"Bambu Lab H2S 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab H2D Pro 0.4 nozzle": [
 					"Bambu Lab P1S 0.4 nozzle",
@@ -384,7 +417,8 @@
 					"Bambu Lab A1 0.4 nozzle",
 					"Bambu Lab A1 mini 0.4 nozzle",
 					"Bambu Lab H2S 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab H2D Pro 0.6 nozzle": [
 					"Bambu Lab P1S 0.6 nozzle",
@@ -395,7 +429,8 @@
 					"Bambu Lab A1 0.6 nozzle",
 					"Bambu Lab A1 mini 0.6 nozzle",
 					"Bambu Lab H2S 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab H2D Pro 0.8 nozzle": [
 					"Bambu Lab P1S 0.8 nozzle",
@@ -406,7 +441,8 @@
 					"Bambu Lab A1 0.8 nozzle",
 					"Bambu Lab A1 mini 0.8 nozzle",
 					"Bambu Lab H2S 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -422,7 +458,8 @@
 					"Bambu Lab X1 0.2 nozzle",
 					"Bambu Lab X1 Carbon 0.2 nozzle",
 					"Bambu Lab X1E 0.2 nozzle",
-					"Bambu Lab P2S 0.2 nozzle"
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab H2S 0.4 nozzle": [
 					"Bambu Lab A1 0.4 nozzle",
@@ -434,7 +471,8 @@
 					"Bambu Lab X1 0.4 nozzle",
 					"Bambu Lab X1 Carbon 0.4 nozzle",
 					"Bambu Lab X1E 0.4 nozzle",
-					"Bambu Lab P2S 0.4 nozzle"
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab H2S 0.6 nozzle": [
 					"Bambu Lab A1 0.6 nozzle",
@@ -446,7 +484,8 @@
 					"Bambu Lab X1 0.6 nozzle",
 					"Bambu Lab X1 Carbon 0.6 nozzle",
 					"Bambu Lab X1E 0.6 nozzle",
-					"Bambu Lab P2S 0.6 nozzle"
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab H2S 0.8 nozzle": [
 					"Bambu Lab A1 0.8 nozzle",
@@ -458,7 +497,8 @@
 					"Bambu Lab X1 0.8 nozzle",
 					"Bambu Lab X1 Carbon 0.8 nozzle",
 					"Bambu Lab X1E 0.8 nozzle",
-					"Bambu Lab P2S 0.8 nozzle"
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
 				]
 			}
 		},
@@ -474,7 +514,8 @@
 					"Bambu Lab P1S 0.2 nozzle",
 					"Bambu Lab X1 0.2 nozzle",
 					"Bambu Lab X1 Carbon 0.2 nozzle",
-					"Bambu Lab X1E 0.2 nozzle"
+					"Bambu Lab X1E 0.2 nozzle",
+					"Bambu Lab X2D 0.2 nozzle"
 				],
 				"Bambu Lab P2S 0.4 nozzle": [
 					"Bambu Lab A1 0.4 nozzle",
@@ -486,7 +527,8 @@
 					"Bambu Lab P1S 0.4 nozzle",
 					"Bambu Lab X1 0.4 nozzle",
 					"Bambu Lab X1 Carbon 0.4 nozzle",
-					"Bambu Lab X1E 0.4 nozzle"
+					"Bambu Lab X1E 0.4 nozzle",
+					"Bambu Lab X2D 0.4 nozzle"
 				],
 				"Bambu Lab P2S 0.6 nozzle": [
 					"Bambu Lab A1 0.6 nozzle",
@@ -498,7 +540,8 @@
 					"Bambu Lab P1S 0.6 nozzle",
 					"Bambu Lab X1 0.6 nozzle",
 					"Bambu Lab X1 Carbon 0.6 nozzle",
-					"Bambu Lab X1E 0.6 nozzle"
+					"Bambu Lab X1E 0.6 nozzle",
+					"Bambu Lab X2D 0.6 nozzle"
 				],
 				"Bambu Lab P2S 0.8 nozzle": [
 					"Bambu Lab A1 0.8 nozzle",
@@ -510,7 +553,68 @@
 					"Bambu Lab P1S 0.8 nozzle",
 					"Bambu Lab X1 0.8 nozzle",
 					"Bambu Lab X1 Carbon 0.8 nozzle",
-					"Bambu Lab X1E 0.8 nozzle"
+					"Bambu Lab X1E 0.8 nozzle",
+					"Bambu Lab X2D 0.8 nozzle"
+				]
+			}
+		},
+		"Bambu Lab X2D": {
+			"downward_check": {
+				"Bambu Lab X2D 0.2 nozzle": [
+					"Bambu Lab A1 0.2 nozzle",
+					"Bambu Lab A1 mini 0.2 nozzle",
+					"Bambu Lab X1 0.2 nozzle",
+					"Bambu Lab X1 Carbon 0.2 nozzle",
+					"Bambu Lab X1E 0.2 nozzle",
+					"Bambu Lab P1P 0.2 nozzle",
+					"Bambu Lab P1S 0.2 nozzle",
+					"Bambu Lab H2D 0.2 nozzle",
+					"Bambu Lab H2D Pro 0.2 nozzle",
+					"Bambu Lab H2S 0.2 nozzle",
+					"Bambu Lab P2S 0.2 nozzle",
+					"Bambu Lab H2C 0.2 nozzle"
+				],
+				"Bambu Lab X2D 0.4 nozzle": [
+					"Bambu Lab A1 0.4 nozzle",
+					"Bambu Lab A1 mini 0.4 nozzle",
+					"Bambu Lab X1 0.4 nozzle",
+					"Bambu Lab X1 Carbon 0.4 nozzle",
+					"Bambu Lab X1E 0.4 nozzle",
+					"Bambu Lab P1P 0.4 nozzle",
+					"Bambu Lab P1S 0.4 nozzle",
+					"Bambu Lab H2D 0.4 nozzle",
+					"Bambu Lab H2D Pro 0.4 nozzle",
+					"Bambu Lab H2S 0.4 nozzle",
+					"Bambu Lab P2S 0.4 nozzle",
+					"Bambu Lab H2C 0.4 nozzle"
+				],
+				"Bambu Lab X2D 0.6 nozzle": [
+					"Bambu Lab A1 0.6 nozzle",
+					"Bambu Lab A1 mini 0.6 nozzle",
+					"Bambu Lab X1 0.6 nozzle",
+					"Bambu Lab X1 Carbon 0.6 nozzle",
+					"Bambu Lab X1E 0.6 nozzle",
+					"Bambu Lab P1P 0.6 nozzle",
+					"Bambu Lab P1S 0.6 nozzle",
+					"Bambu Lab H2D 0.6 nozzle",
+					"Bambu Lab H2D Pro 0.6 nozzle",
+					"Bambu Lab H2S 0.6 nozzle",
+					"Bambu Lab P2S 0.6 nozzle",
+					"Bambu Lab H2C 0.6 nozzle"
+				],
+				"Bambu Lab X2D 0.8 nozzle": [
+					"Bambu Lab A1 0.8 nozzle",
+					"Bambu Lab A1 mini 0.8 nozzle",
+					"Bambu Lab X1 0.8 nozzle",
+					"Bambu Lab X1 Carbon 0.8 nozzle",
+					"Bambu Lab X1E 0.8 nozzle",
+					"Bambu Lab P1P 0.8 nozzle",
+					"Bambu Lab P1S 0.8 nozzle",
+					"Bambu Lab H2D 0.8 nozzle",
+					"Bambu Lab H2D Pro 0.8 nozzle",
+					"Bambu Lab H2S 0.8 nozzle",
+					"Bambu Lab P2S 0.8 nozzle",
+					"Bambu Lab H2C 0.8 nozzle"
 				]
 			}
 		}

resources/profiles/BBL/filament/AliZ/AliZ PA-CF @P1-X1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AliZPX1FSA04",
 	"name": "AliZ PA-CF @P1-X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "AliZ PA-CF @base",
+	"from": "system",
+	"setting_id": "AliZPX1FSA04",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AliZPX1FSA04",
 	"name": "AliZ PETG @P1-X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "AliZ PETG @base",
+	"from": "system",
+	"setting_id": "AliZPX1FSA04",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/BBL/filament/AliZ/AliZ PETG-CF @P1-X1.json

@@ -4,13 +4,13 @@
 	"inherits": "AliZ PETG-CF @base",
 	"from": "system",
 	"setting_id": "AliZPX1FSG50",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],
 	"pressure_advance": [
 		"0.026"
 	],
-	"instantiation": "true",
 	"compatible_printers": [
 		"Bambu Lab X1 Carbon 0.4 nozzle",
 		"Bambu Lab X1 0.4 nozzle",

resources/profiles/BBL/filament/AliZ/AliZ PLA @P1-X1.json

@@ -1,10 +1,10 @@
 {
 	"type": "filament",
-	"setting_id": "AliZPX1FSA04",
 	"name": "AliZ PLA @P1-X1",
-	"from": "system",
-	"instantiation": "true",
 	"inherits": "AliZ PLA @base",
+	"from": "system",
+	"setting_id": "AliZPX1FSA04",
+	"instantiation": "true",
 	"enable_pressure_advance": [
 		"1"
 	],

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_09",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"25",
+		"16",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D 0.8 nozzle",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_30",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"35",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS @BBL X2D",
+	"inherits": "Bambu ABS @base",
+	"from": "system",
+	"setting_id": "GFSB00_19",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0124"
+	],
+	"counter_coef_3": [
+		"0.0241"
+	],
+	"counter_limit_max": [
+		"0.3341"
+	],
+	"counter_limit_min": [
+		"0.0241"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"35",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0008"
+	],
+	"hole_coef_3": [
+		"0.1319"
+	],
+	"hole_limit_max": [
+		"0.1319"
+	],
+	"hole_limit_min": [
+		"0.1119"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,266 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS-GF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ABS-GF @base",
+	"from": "system",
+	"setting_id": "GFSB50_06",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json

@@ -0,0 +1,267 @@
+{
+	"type": "filament",
+	"name": "Bambu ABS-GF @BBL X2D",
+	"inherits": "Bambu ABS-GF @base",
+	"from": "system",
+	"setting_id": "GFSB50_07",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"1",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,293 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu ASA @base",
+	"from": "system",
+	"setting_id": "GFSB01_21",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0094"
+	],
+	"counter_coef_3": [
+		"-0.0092"
+	],
+	"counter_limit_max": [
+		"0.2258"
+	],
+	"counter_limit_min": [
+		"-0.0092"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"0.0013"
+	],
+	"hole_coef_3": [
+		"0.1261"
+	],
+	"hole_limit_max": [
+		"0.1586"
+	],
+	"hole_limit_min": [
+		"0.1261"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,293 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ASA @base",
+	"from": "system",
+	"setting_id": "GFSB01_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0094"
+	],
+	"counter_coef_3": [
+		"-0.0092"
+	],
+	"counter_limit_max": [
+		"0.2258"
+	],
+	"counter_limit_min": [
+		"-0.0092"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"25",
+		"18",
+		"20"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"0.0013"
+	],
+	"hole_coef_3": [
+		"0.1261"
+	],
+	"hole_limit_max": [
+		"0.1586"
+	],
+	"hole_limit_min": [
+		"0.1261"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA @BBL X2D",
+	"inherits": "Bambu ASA @base",
+	"from": "system",
+	"setting_id": "GFSB01_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"65"
+	],
+	"counter_coef_2": [
+		"0.0094"
+	],
+	"counter_coef_3": [
+		"-0.0092"
+	],
+	"counter_limit_max": [
+		"0.2258"
+	],
+	"counter_limit_min": [
+		"-0.0092"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"35",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"0.0013"
+	],
+	"hole_coef_3": [
+		"0.1261"
+	],
+	"hole_limit_max": [
+		"0.1586"
+	],
+	"hole_limit_min": [
+		"0.1261"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,269 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ASA-Aero @base",
+	"from": "system",
+	"setting_id": "GFSB02_06",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5",
+		"1.5",
+		"1.5",
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"5",
+		"5",
+		"5",
+		"5"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift",
+		"Normal Lift",
+		"Normal Lift",
+		"Normal Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.52",
+		"0.52",
+		"0.52",
+		"0.52"
+	],
+	"filament_max_volumetric_speed": [
+		"3",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D.json

@@ -0,0 +1,270 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA-Aero @BBL X2D",
+	"inherits": "Bambu ASA-Aero @base",
+	"from": "system",
+	"setting_id": "GFSB02_07",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5",
+		"1.5",
+		"1.5",
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"5",
+		"5",
+		"5",
+		"5"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Normal Lift",
+		"Normal Lift",
+		"Normal Lift",
+		"Normal Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.52",
+		"0.52",
+		"0.52",
+		"0.52"
+	],
+	"filament_max_volumetric_speed": [
+		"3",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,269 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA-CF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu ASA-CF @base",
+	"from": "system",
+	"setting_id": "GFSB51_12",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.9",
+		"0.9",
+		"0.9",
+		"0.9"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"275"
+	],
+	"nozzle_temperature": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D.json

@@ -0,0 +1,270 @@
+{
+	"type": "filament",
+	"name": "Bambu ASA-CF @BBL X2D",
+	"inherits": "Bambu ASA-CF @base",
+	"from": "system",
+	"setting_id": "GFSB51_13",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.9",
+		"0.9",
+		"0.9",
+		"0.9"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"275"
+	],
+	"nozzle_temperature": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,281 @@
+{
+	"type": "filament",
+	"name": "Bambu PA-CF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PA-CF @base",
+	"from": "system",
+	"setting_id": "GFSN03_05",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"additional_fan_full_speed_layer": [
+		"2"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"290"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D.json

@@ -0,0 +1,282 @@
+{
+	"type": "filament",
+	"name": "Bambu PA-CF @BBL X2D",
+	"inherits": "Bambu PA-CF @base",
+	"from": "system",
+	"setting_id": "GFSN03_06",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"additional_fan_full_speed_layer": [
+		"2"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"fan_cooling_layer_time": [
+		"5"
+	],
+	"fan_max_speed": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"290"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,302 @@
+{
+	"type": "filament",
+	"name": "Bambu PA6-CF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PA6-CF @base",
+	"from": "system",
+	"setting_id": "GFSN05_01",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"-0.0016"
+	],
+	"counter_coef_3": [
+		"0.0031"
+	],
+	"counter_limit_max": [
+		"0.0031"
+	],
+	"counter_limit_min": [
+		"-0.038"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"275"
+	],
+	"hole_coef_2": [
+		"-0.0051"
+	],
+	"hole_coef_3": [
+		"0.2194"
+	],
+	"hole_limit_max": [
+		"0.2194"
+	],
+	"hole_limit_min": [
+		"0.092"
+	],
+	"nozzle_temperature": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"overhang_fan_speed": [
+		"55"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D.json

@@ -0,0 +1,294 @@
+{
+	"type": "filament",
+	"name": "Bambu PA6-CF @BBL X2D",
+	"inherits": "Bambu PA6-CF @base",
+	"from": "system",
+	"setting_id": "GFSN05_07",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"-0.0016"
+	],
+	"counter_coef_3": [
+		"0.0031"
+	],
+	"counter_limit_max": [
+		"0.0031"
+	],
+	"counter_limit_min": [
+		"-0.038"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"275"
+	],
+	"hole_coef_2": [
+		"-0.0051"
+	],
+	"hole_coef_3": [
+		"0.2194"
+	],
+	"hole_limit_max": [
+		"0.2194"
+	],
+	"hole_limit_min": [
+		"0.092"
+	],
+	"nozzle_temperature": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"nozzle_temperature_initial_layer": [
+		"275",
+		"275",
+		"275",
+		"275"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,266 @@
+{
+	"type": "filament",
+	"name": "Bambu PA6-GF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PA6-GF @base",
+	"from": "system",
+	"setting_id": "GFSN08_06",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"1",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"10.5",
+		"10.5",
+		"10.5",
+		"10.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"265"
+	],
+	"nozzle_temperature": [
+		"265",
+		"265",
+		"265",
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265",
+		"265",
+		"265"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D.json

@@ -0,0 +1,267 @@
+{
+	"type": "filament",
+	"name": "Bambu PA6-GF @BBL X2D",
+	"inherits": "Bambu PA6-GF @base",
+	"from": "system",
+	"setting_id": "GFSN08_07",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"10.5",
+		"10.5",
+		"10.5",
+		"10.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"265"
+	],
+	"nozzle_temperature": [
+		"265",
+		"265",
+		"265",
+		"265"
+	],
+	"nozzle_temperature_initial_layer": [
+		"265",
+		"265",
+		"265",
+		"265"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PAHT-CF @base",
+	"from": "system",
+	"setting_id": "GFSN04_04",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"0.002"
+	],
+	"counter_coef_3": [
+		"-0.055"
+	],
+	"counter_limit_max": [
+		"-0.005"
+	],
+	"counter_limit_min": [
+		"-0.055"
+	],
+	"fan_max_speed": [
+		"45"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"290"
+	],
+	"hole_coef_2": [
+		"0.0009"
+	],
+	"hole_coef_3": [
+		"0.1686"
+	],
+	"hole_limit_max": [
+		"0.19"
+	],
+	"hole_limit_min": [
+		"0.1686"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"overhang_fan_speed": [
+		"60"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D.json

@@ -0,0 +1,291 @@
+{
+	"type": "filament",
+	"name": "Bambu PAHT-CF @BBL X2D",
+	"inherits": "Bambu PAHT-CF @base",
+	"from": "system",
+	"setting_id": "GFSN04_05",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"0.002"
+	],
+	"counter_coef_3": [
+		"-0.055"
+	],
+	"counter_limit_max": [
+		"-0.005"
+	],
+	"counter_limit_min": [
+		"-0.055"
+	],
+	"filament_flow_ratio": [
+		"0.96",
+		"0.96",
+		"0.96",
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"290"
+	],
+	"hole_coef_2": [
+		"0.0009"
+	],
+	"hole_coef_3": [
+		"0.1686"
+	],
+	"hole_limit_max": [
+		"0.19"
+	],
+	"hole_limit_min": [
+		"0.1686"
+	],
+	"nozzle_temperature": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"nozzle_temperature_initial_layer": [
+		"290",
+		"290",
+		"290",
+		"290"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,302 @@
+{
+	"type": "filament",
+	"name": "Bambu PC @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PC @base",
+	"from": "system",
+	"setting_id": "GFSC00_18",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"0.0081"
+	],
+	"counter_coef_3": [
+		"0.0183"
+	],
+	"counter_limit_max": [
+		"0.2208"
+	],
+	"counter_limit_min": [
+		"0.0183"
+	],
+	"fan_max_speed": [
+		"55"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_flow_ratio": [
+		"0.94",
+		"0.94",
+		"0.94",
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"30",
+		"18",
+		"20"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"280"
+	],
+	"hole_coef_2": [
+		"0.0009"
+	],
+	"hole_coef_3": [
+		"0.0725"
+	],
+	"hole_limit_max": [
+		"0.095"
+	],
+	"hole_limit_min": [
+		"0.0725"
+	],
+	"nozzle_temperature": [
+		"280",
+		"280",
+		"280",
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"overhang_fan_speed": [
+		"75"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,296 @@
+{
+	"type": "filament",
+	"name": "Bambu PC @BBL X2D 0.8 nozzle",
+	"inherits": "Bambu PC @base",
+	"from": "system",
+	"setting_id": "GFSC00_37",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"0.0081"
+	],
+	"counter_coef_3": [
+		"0.0183"
+	],
+	"counter_limit_max": [
+		"0.2208"
+	],
+	"counter_limit_min": [
+		"0.0183"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.94",
+		"0.94",
+		"0.94",
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"35",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"260"
+	],
+	"hole_coef_2": [
+		"0.0009"
+	],
+	"hole_coef_3": [
+		"0.0725"
+	],
+	"hole_limit_max": [
+		"0.095"
+	],
+	"hole_limit_min": [
+		"0.0725"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PC @BBL X2D.json

@@ -0,0 +1,296 @@
+{
+	"type": "filament",
+	"name": "Bambu PC @BBL X2D",
+	"inherits": "Bambu PC @base",
+	"from": "system",
+	"setting_id": "GFSC00_31",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"counter_coef_2": [
+		"0.0081"
+	],
+	"counter_coef_3": [
+		"0.0183"
+	],
+	"counter_limit_max": [
+		"0.2208"
+	],
+	"counter_limit_min": [
+		"0.0183"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.94",
+		"0.94",
+		"0.94",
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"35",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"260"
+	],
+	"hole_coef_2": [
+		"0.0009"
+	],
+	"hole_coef_3": [
+		"0.0725"
+	],
+	"hole_limit_max": [
+		"0.095"
+	],
+	"hole_limit_min": [
+		"0.0725"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PC FR @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PC FR @base",
+	"from": "system",
+	"setting_id": "GFSC01_28",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.94",
+		"0.94",
+		"0.94",
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"280"
+	],
+	"nozzle_temperature": [
+		"280",
+		"280",
+		"280",
+		"280"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PC FR @BBL X2D 0.8 nozzle",
+	"inherits": "Bambu PC FR @base",
+	"from": "system",
+	"setting_id": "GFSC01_40",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.94",
+		"0.94",
+		"0.94",
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"260"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PC FR @BBL X2D.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PC FR @BBL X2D",
+	"inherits": "Bambu PC FR @base",
+	"from": "system",
+	"setting_id": "GFSC01_29",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"60"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"filament_flow_ratio": [
+		"0.94",
+		"0.94",
+		"0.94",
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"260"
+	],
+	"nozzle_temperature": [
+		"260",
+		"260",
+		"260",
+		"260"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"slow_down_layer_time": [
+		"12"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,311 @@
+{
+	"type": "filament",
+	"name": "Bambu PET-CF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PET-CF @base",
+	"from": "system",
+	"setting_id": "GFST01_06",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"counter_coef_2": [
+		"-0.0004"
+	],
+	"counter_coef_3": [
+		"-0.0156"
+	],
+	"counter_limit_max": [
+		"-0.015"
+	],
+	"counter_limit_min": [
+		"-0.025"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_max_speed": [
+		"45"
+	],
+	"fan_min_speed": [
+		"25"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0003"
+	],
+	"hole_coef_3": [
+		"0.1741"
+	],
+	"hole_limit_max": [
+		"0.174"
+	],
+	"hole_limit_min": [
+		"0.167"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"overhang_fan_speed": [
+		"50"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D.json

@@ -0,0 +1,309 @@
+{
+	"type": "filament",
+	"name": "Bambu PET-CF @BBL X2D",
+	"inherits": "Bambu PET-CF @base",
+	"from": "system",
+	"setting_id": "GFST01_07",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"chamber_temperatures": [
+		"50"
+	],
+	"counter_coef_2": [
+		"-0.0004"
+	],
+	"counter_coef_3": [
+		"-0.0156"
+	],
+	"counter_limit_max": [
+		"-0.015"
+	],
+	"counter_limit_min": [
+		"-0.025"
+	],
+	"eng_plate_temp": [
+		"100"
+	],
+	"eng_plate_temp_initial_layer": [
+		"100"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"8",
+		"8",
+		"8",
+		"8"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"270"
+	],
+	"hole_coef_2": [
+		"-0.0003"
+	],
+	"hole_coef_3": [
+		"0.1741"
+	],
+	"hole_limit_max": [
+		"0.174"
+	],
+	"hole_limit_min": [
+		"0.167"
+	],
+	"nozzle_temperature": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270",
+		"270",
+		"270",
+		"270"
+	],
+	"reduce_fan_stop_start_freq": [
+		"0"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,278 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Basic @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PETG Basic @base",
+	"from": "system",
+	"setting_id": "GFSG00_13",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"0.5",
+		"0.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"250"
+	],
+	"filament_tower_ironing_area": [
+		"8"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,278 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Basic @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PETG Basic @base",
+	"from": "system",
+	"setting_id": "GFSG00_12",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"15",
+		"21",
+		"15",
+		"15"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"250"
+	],
+	"filament_tower_ironing_area": [
+		"8"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D.json

@@ -0,0 +1,279 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Basic @BBL X2D",
+	"inherits": "Bambu PETG Basic @base",
+	"from": "system",
+	"setting_id": "GFSG00_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"23",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"250"
+	],
+	"filament_tower_ironing_area": [
+		"8"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"nozzle_temperature_initial_layer": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,311 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG HF @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PETG HF @base",
+	"from": "system",
+	"setting_id": "GFSG02_13",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0058"
+	],
+	"counter_coef_3": [
+		"0.0107"
+	],
+	"counter_limit_max": [
+		"0.15"
+	],
+	"counter_limit_min": [
+		"0.01"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"0.5",
+		"0.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"filament_tower_ironing_area": [
+		"8"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0042"
+	],
+	"hole_coef_3": [
+		"0.2006"
+	],
+	"hole_limit_max": [
+		"0.2"
+	],
+	"hole_limit_min": [
+		"0.09"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230",
+		"230",
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,311 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG HF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PETG HF @base",
+	"from": "system",
+	"setting_id": "GFSG02_12",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0058"
+	],
+	"counter_coef_3": [
+		"0.0107"
+	],
+	"counter_limit_max": [
+		"0.15"
+	],
+	"counter_limit_min": [
+		"0.01"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"30",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"filament_tower_ironing_area": [
+		"8"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0042"
+	],
+	"hole_coef_3": [
+		"0.2006"
+	],
+	"hole_limit_max": [
+		"0.2"
+	],
+	"hole_limit_min": [
+		"0.09"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230",
+		"230",
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D.json

@@ -0,0 +1,312 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG HF @BBL X2D",
+	"inherits": "Bambu PETG HF @base",
+	"from": "system",
+	"setting_id": "GFSG02_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0058"
+	],
+	"counter_coef_3": [
+		"0.0107"
+	],
+	"counter_limit_max": [
+		"0.15"
+	],
+	"counter_limit_min": [
+		"0.01"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"30"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"35",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"filament_tower_ironing_area": [
+		"8"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0042"
+	],
+	"hole_coef_3": [
+		"0.2006"
+	],
+	"hole_limit_max": [
+		"0.2"
+	],
+	"hole_limit_min": [
+		"0.09"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230",
+		"230",
+		"230",
+		"230"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,281 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PETG Translucent @base",
+	"from": "system",
+	"setting_id": "GFSG01_21",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"additional_cooling_fan_speed": [
+		"20"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"0.5",
+		"0.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,278 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PETG Translucent @base",
+	"from": "system",
+	"setting_id": "GFSG01_19",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"additional_cooling_fan_speed": [
+		"10"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"6",
+		"6",
+		"6",
+		"6"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,275 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle",
+	"inherits": "Bambu PETG Translucent @base",
+	"from": "system",
+	"setting_id": "GFSG01_29",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"16",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D.json

@@ -0,0 +1,275 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG Translucent @BBL X2D",
+	"inherits": "Bambu PETG Translucent @base",
+	"from": "system",
+	"setting_id": "GFSG01_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"20"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"16",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"245"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"245",
+		"245",
+		"245",
+		"245"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250",
+		"250",
+		"250",
+		"250"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,305 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG-CF @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PETG-CF @base",
+	"from": "system",
+	"setting_id": "GFSG50_17",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0022"
+	],
+	"counter_coef_3": [
+		"-0.0178"
+	],
+	"counter_limit_max": [
+		"0.036"
+	],
+	"counter_limit_min": [
+		"-0.0178"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"11.5",
+		"11.5",
+		"11.5",
+		"11.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"255"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0014"
+	],
+	"hole_coef_3": [
+		"0.11"
+	],
+	"hole_limit_max": [
+		"0.11"
+	],
+	"hole_limit_min": [
+		"0.075"
+	],
+	"nozzle_temperature": [
+		"255",
+		"255",
+		"255",
+		"255"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255",
+		"255",
+		"255"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json

@@ -0,0 +1,305 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG-CF @BBL X2D 0.8 nozzle",
+	"inherits": "Bambu PETG-CF @base",
+	"from": "system",
+	"setting_id": "GFSG50_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0022"
+	],
+	"counter_coef_3": [
+		"-0.0178"
+	],
+	"counter_limit_max": [
+		"0.036"
+	],
+	"counter_limit_min": [
+		"-0.0178"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"11.5",
+		"11.5",
+		"11.5",
+		"11.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"255"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0014"
+	],
+	"hole_coef_3": [
+		"0.11"
+	],
+	"hole_limit_max": [
+		"0.11"
+	],
+	"hole_limit_min": [
+		"0.075"
+	],
+	"nozzle_temperature": [
+		"255",
+		"255",
+		"255",
+		"255"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255",
+		"255",
+		"255"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D.json

@@ -0,0 +1,305 @@
+{
+	"type": "filament",
+	"name": "Bambu PETG-CF @BBL X2D",
+	"inherits": "Bambu PETG-CF @base",
+	"from": "system",
+	"setting_id": "GFSG50_16",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0022"
+	],
+	"counter_coef_3": [
+		"-0.0178"
+	],
+	"counter_limit_max": [
+		"0.036"
+	],
+	"counter_limit_min": [
+		"-0.0178"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_max_speed": [
+		"40"
+	],
+	"fan_min_speed": [
+		"5"
+	],
+	"filament_extruder_compatibility": [
+		"16"
+	],
+	"filament_flow_ratio": [
+		"0.95",
+		"0.95",
+		"0.95",
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"11.5",
+		"11.5",
+		"11.5",
+		"11.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"255"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0014"
+	],
+	"hole_coef_3": [
+		"0.11"
+	],
+	"hole_limit_max": [
+		"0.11"
+	],
+	"hole_limit_min": [
+		"0.075"
+	],
+	"nozzle_temperature": [
+		"255",
+		"255",
+		"255",
+		"255"
+	],
+	"nozzle_temperature_initial_layer": [
+		"255",
+		"255",
+		"255",
+		"255"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,284 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Aero @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Aero @base",
+	"from": "system",
+	"setting_id": "GFSA11_09",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_extruder_compatibility": [
+		"8"
+	],
+	"filament_flow_ratio": [
+		"0.6",
+		"0.6",
+		"0.6",
+		"0.6"
+	],
+	"filament_max_volumetric_speed": [
+		"3",
+		"6",
+		"6",
+		"6"
+	],
+	"filament_printable": [
+		"1"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D.json

@@ -0,0 +1,285 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Aero @BBL X2D",
+	"inherits": "Bambu PLA Aero @base",
+	"from": "system",
+	"setting_id": "GFSA11_10",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_extruder_compatibility": [
+		"8"
+	],
+	"filament_flow_ratio": [
+		"0.6",
+		"0.6",
+		"0.6",
+		"0.6"
+	],
+	"filament_max_volumetric_speed": [
+		"3",
+		"6",
+		"6",
+		"6"
+	],
+	"filament_printable": [
+		"1"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,299 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Basic @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PLA Basic @base",
+	"from": "system",
+	"setting_id": "GFSA00_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"5",
+		"5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0025"
+	],
+	"counter_coef_3": [
+		"0.014"
+	],
+	"counter_limit_max": [
+		"0.076"
+	],
+	"counter_limit_min": [
+		"0.014"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"0.5",
+		"0.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0028"
+	],
+	"hole_coef_3": [
+		"0.12"
+	],
+	"hole_limit_max": [
+		"0.12"
+	],
+	"hole_limit_min": [
+		"0.05"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,296 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Basic @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Basic @base",
+	"from": "system",
+	"setting_id": "GFSA00_08",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0025"
+	],
+	"counter_coef_3": [
+		"0.014"
+	],
+	"counter_limit_max": [
+		"0.076"
+	],
+	"counter_limit_min": [
+		"0.014"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"40",
+		"21",
+		"30"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0028"
+	],
+	"hole_coef_3": [
+		"0.12"
+	],
+	"hole_limit_max": [
+		"0.12"
+	],
+	"hole_limit_min": [
+		"0.05"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D.json

@@ -0,0 +1,297 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Basic @BBL X2D",
+	"inherits": "Bambu PLA Basic @base",
+	"from": "system",
+	"setting_id": "GFSA00_09",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"counter_coef_2": [
+		"0.0025"
+	],
+	"counter_coef_3": [
+		"0.014"
+	],
+	"counter_limit_max": [
+		"0.076"
+	],
+	"counter_limit_min": [
+		"0.014"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"40",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"hole_coef_2": [
+		"-0.0028"
+	],
+	"hole_coef_3": [
+		"0.12"
+	],
+	"hole_limit_max": [
+		"0.12"
+	],
+	"hole_limit_min": [
+		"0.05"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,275 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PLA Dynamic @base",
+	"from": "system",
+	"setting_id": "GFSA13_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"2",
+		"2"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Dynamic @base",
+	"from": "system",
+	"setting_id": "GFSA13_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"21",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Dynamic @BBL X2D",
+	"inherits": "Bambu PLA Dynamic @base",
+	"from": "system",
+	"setting_id": "GFSA13_21",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"21",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,275 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PLA Galaxy @base",
+	"from": "system",
+	"setting_id": "GFSA15_22",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"5",
+		"5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"0.5",
+		"0.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Galaxy @base",
+	"from": "system",
+	"setting_id": "GFSA15_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"21",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Galaxy @BBL X2D",
+	"inherits": "Bambu PLA Galaxy @base",
+	"from": "system",
+	"setting_id": "GFSA15_21",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"21",
+		"21",
+		"21",
+		"21"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,64 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Glow @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PLA Glow @BBL X1C",
+	"from": "system",
+	"setting_id": "GFSA12_22",
+	"instantiation": "true",
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_extruder_compatibility": [
+		"9"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2"
+	],
+	"filament_printable": [
+		"0"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Glow @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Glow @base",
+	"from": "system",
+	"setting_id": "GFSA12_20",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Glow @BBL X2D",
+	"inherits": "Bambu PLA Glow @base",
+	"from": "system",
+	"setting_id": "GFSA12_21",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"18",
+		"18",
+		"18",
+		"18"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json

@@ -0,0 +1,275 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Lite @BBL X2D 0.2 nozzle",
+	"inherits": "Bambu PLA Lite @base",
+	"from": "system",
+	"setting_id": "GFSA18_14",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"3",
+		"3",
+		"3",
+		"3"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"nil",
+		"nil",
+		"5",
+		"5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"50",
+		"50"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_extruder_compatibility": [
+		"24"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"2",
+		"2",
+		"0.5",
+		"0.5"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.2 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Lite @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Lite @base",
+	"from": "system",
+	"setting_id": "GFSA18_12",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"3",
+		"3"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"1.029",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"40",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Lite @BBL X2D",
+	"inherits": "Bambu PLA Lite @base",
+	"from": "system",
+	"setting_id": "GFSA18_13",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"nil",
+		"1",
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"nil",
+		"Spiral Lift",
+		"nil"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"16",
+		"40",
+		"16",
+		"16"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.6 nozzle",
+		"Bambu Lab X2D 0.8 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}

resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json

@@ -0,0 +1,272 @@
+{
+	"type": "filament",
+	"name": "Bambu PLA Marble @BBL X2D 0.4 nozzle",
+	"inherits": "Bambu PLA Marble @base",
+	"from": "system",
+	"setting_id": "GFSA07_08",
+	"instantiation": "true",
+	"filament_adaptive_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_cooling_before_tower": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_deretraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_enable_overhang_speed": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_extruder_variant": [
+		"Direct Drive Standard",
+		"Direct Drive High Flow",
+		"Bowden Standard",
+		"Bowden High Flow"
+	],
+	"filament_flush_temp": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_flush_volumetric_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_overhang_1_4_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_overhang_2_4_speed": [
+		"50",
+		"50",
+		"50",
+		"50"
+	],
+	"filament_overhang_3_4_speed": [
+		"30",
+		"30",
+		"30",
+		"30"
+	],
+	"filament_overhang_4_4_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_overhang_totally_speed": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_bridge_speed": [
+		"25",
+		"25",
+		"25",
+		"25"
+	],
+	"filament_pre_cooling_temperature": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_pre_cooling_temperature_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_ramming_travel_time_nc": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_retract_length_nc": [
+		"14",
+		"14",
+		"14",
+		"14"
+	],
+	"filament_ramming_volumetric_speed": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_ramming_volumetric_speed_nc": [
+		"-1",
+		"-1",
+		"-1",
+		"-1"
+	],
+	"filament_retract_before_wipe": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"10",
+		"10",
+		"10",
+		"10"
+	],
+	"filament_retraction_length": [
+		"0.4",
+		"0.4",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_wipe": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_wipe_distance": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"filament_z_hop": [
+		"nil",
+		"nil",
+		"nil",
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift",
+		"Spiral Lift"
+	],
+	"long_retractions_when_ec": [
+		"1",
+		"1",
+		"1",
+		"1"
+	],
+	"override_process_overhang_speed": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"retraction_distances_when_ec": [
+		"3",
+		"3",
+		"4",
+		"4"
+	],
+	"slow_down_min_speed": [
+		"20",
+		"20",
+		"20",
+		"20"
+	],
+	"volumetric_speed_coefficients": [
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0",
+		"0 0 0 0 0 0"
+	],
+	"eng_plate_temp": [
+		"55"
+	],
+	"eng_plate_temp_initial_layer": [
+		"55"
+	],
+	"filament_flow_ratio": [
+		"0.98",
+		"0.98",
+		"0.98",
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12",
+		"12",
+		"12",
+		"12"
+	],
+	"filament_ramming_travel_time": [
+		"0",
+		"0",
+		"0",
+		"0"
+	],
+	"filament_tower_interface_print_temp": [
+		"220"
+	],
+	"first_x_layer_fan_speed": [
+		"40"
+	],
+	"nozzle_temperature": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220",
+		"220",
+		"220",
+		"220"
+	],
+	"compatible_printers": [
+		"Bambu Lab X2D 0.4 nozzle"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n"
+	]
+}