diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json
index e6be22534f..63236bd761 100644
--- a/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json	
@@ -18,7 +18,7 @@
         "20"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
     ],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json
index e6e21a0d2a..2d1ed36e5d 100644
--- a/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json	
@@ -18,7 +18,7 @@
         "20"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
     ],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json
index 9c08b3c02d..03d0062b2e 100644
--- a/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json	
@@ -15,7 +15,7 @@
         "30"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
     ],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json
index 986af075a4..c2eb391a13 100644
--- a/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json	
@@ -51,7 +51,7 @@
         "1"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
     ],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json
index e3a17e003f..f50ff63254 100644
--- a/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json	
@@ -45,7 +45,7 @@
         "1"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
     ],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",
diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json
index 60edee61fe..125857d916 100644
--- a/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json	
+++ b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json	
@@ -33,7 +33,7 @@
         "1"
     ],
     "filament_start_gcode": [
-        "; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else}\nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
     ],
     "compatible_printers": [
         "Creality K2 Plus 0.2 nozzle",