From cf9ec18df5fb57f8555052b6789f851dd36516f2 Mon Sep 17 00:00:00 2001 From: SoftFever <103989404+SoftFever@users.noreply.github.com> Date: Thu, 15 Oct 2026 19:32:30 +0800 Subject: [PATCH] Complete the Simplified Chinese translations (#16512) --- localization/i18n/zh_CN/OrcaSlicer_zh_CN.po | 6264 ++++++++++++------- 1 file changed, 3997 insertions(+), 2267 deletions(-) diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index 30a988d57d..2b00f52e4b 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -159,23 +159,29 @@ msgstr "AMS 不支持 TPU 耗材。" msgid "AMS does not support 'Bambu Lab PET-CF'." msgstr "AMS不支持Bambu Lab PET-CF耗材。" +# AI Translated msgid "The current filament doesn't support the E3D high-flow nozzle and can't be used." -msgstr "当前的耗材不支持 E3D 高流量喷嘴，因此无法使用。" +msgstr "当前的耗材丝不支持 E3D 高流量喷嘴，因此无法使用。" +# AI Translated msgid "The current filament doesn't support the TPU high-flow nozzle and can't be used." -msgstr "当前的耗材不支持 TPU 高流量喷嘴，因此无法使用。" +msgstr "当前的耗材丝不支持 TPU 高流量喷嘴，因此无法使用。" +# AI Translated msgid "Auto dynamic flow calibration is not supported for TPU filament." -msgstr "自动流量校准不支持 TPU 耗材" +msgstr "TPU 耗材丝不支持自动动态流量校准。" +# AI Translated msgid "Bambu TPU 85A is not supported for printing with 0.4 mm Standard or High Flow nozzles." -msgstr "Bambu TPU 85A 不支持使用 0.4 毫米标准或高流动性喷嘴进行打印。" +msgstr "Bambu TPU 85A 不支持使用 0.4 毫米标准或高流量喷嘴进行打印。" +# AI Translated msgid "How to feed TPU filament." -msgstr "如何装入 TPU 耗材。" +msgstr "如何装入 TPU 耗材丝。" +# AI Translated msgid "How to feed TPU filament on X2D." -msgstr "如何为 X2D 装载 TPU 耗材。" +msgstr "如何为 X2D 装载 TPU 耗材丝。" msgid "Please cold pull before printing TPU to avoid clogging. You may use cold pull maintenance on the printer." msgstr "打印TPU前请先执行冷拉以避免堵塞。您可以使用打印机上的冷拉维护功能。" @@ -186,8 +192,9 @@ msgstr "受潮的PVA会软化，并且可能粘在AMS内，请在使用前注意 msgid "Damp PVA is flexible and may get stuck in extruder. Dry it before use." msgstr "受潮的PVA会软化，并且可能粘在挤出机内，请在使用前注意烘干" +# AI Translated msgid "The rough surface of PLA Glow can accelerate wear on the AMS system, particularly on the internal components of the AMS Lite." -msgstr "泛光PLA的粗糙表面可能会加速AMS的磨损，尤其是AMS Lite的内部组件。" +msgstr "PLA Glow 的粗糙表面可能会加速 AMS 的磨损，尤其是 AMS Lite 的内部组件。" msgid "PLA Glow may wear the AMS first stage feeder. Use an external spool instead." msgstr "PLA Glow 可能导致 AMS 一级进料器过度磨损，建议改用外置料盘。" @@ -208,37 +215,45 @@ msgstr "默认参数可能影响打印质量，请根据需要进行调整，以 msgid "%s has a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." msgstr "%s 在使用 0.4 mm 高流量喷嘴时存在堵头风险，谨慎使用。" +# AI Translated #, c-format, boost-format msgid "%s filaments are hard and brittle and could break in AMS, and there is also a risk of nozzle clogging when using 0.4mm high-flow nozzles. Use with caution." -msgstr "%s 耗材质地较硬且较脆，在 AMS 中使用时可能发生断裂，使用 0.4 mm 高流量喷嘴时还存在堵头风险，谨慎使用。" +msgstr "%s 耗材丝质地较硬且较脆，在 AMS 中使用时可能发生断裂，使用 0.4 mm 高流量喷嘴时还存在堵头风险，谨慎使用。" #, c-format, boost-format msgid "%s has a risk of nozzle clogging when using 0.4, 0.6, 0.8mm high-flow nozzles. Use with caution." msgstr "%s 在使用 0.4 / 0.6 / 0.8 mm 高流量喷嘴时存在堵头风险，谨慎使用。" +# AI Translated +# Needs human review: English source is itself a fragment; confirm the intended sentence #, c-format, boost-format msgid "%s may fail to load or unload due to the Filament Track Switch. If you wish to continue." -msgstr "%s 可能因耗材变轨器而无法装入或退料。如果要继续。" +msgstr "%s 可能因耗材变轨器而无法进料或退料。如仍要继续，请谨慎使用。" +# AI Translated #, c-format, boost-format msgid "%s is not supported by %s extruder." -msgstr "%s 不被 %s 挤出机支持。" +msgstr "%s 无法用于%s挤出机。" +# AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s Bowden extruder. Use with caution!" -msgstr "'%s' 在 %s 远程挤出机上打印时，可能会出现严重的打印质量问题。谨慎使用！" +msgstr "'%s' 在%s远程挤出机上打印时，可能会出现严重的打印质量问题。谨慎使用！" +# AI Translated #, c-format, boost-format msgid "There may be critical print quality issues when printing '%s' with %s extruder. Use with caution!" -msgstr "'%s' 在 %s 挤出机上打印时，可能会出现严重的打印质量问题。谨慎使用！" +msgstr "'%s' 在%s挤出机上打印时，可能会出现严重的打印质量问题。谨慎使用！" +# AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s Bowden extruder. Use with caution." -msgstr "'%s' 在 %s 远程挤出机上打印时，可能会出现打印质量问题。谨慎使用。" +msgstr "'%s' 在%s远程挤出机上打印时，可能会出现打印质量问题。谨慎使用。" +# AI Translated #, c-format, boost-format msgid "There may be print quality issues when printing '%s' with %s extruder. Use with caution." -msgstr "'%s' 在 %s 挤出机上打印时，可能会出现打印质量问题。谨慎使用。" +msgstr "'%s' 在%s挤出机上打印时，可能会出现打印质量问题。谨慎使用。" msgid "High Flow" msgstr "高流量" @@ -253,8 +268,9 @@ msgstr "TPU 高流量" msgid "E3D High Flow" msgstr "E3D 高流量" +# AI Translated msgid "Unknown" -msgstr "未定义" +msgstr "未知" msgid "Hardened Steel" msgstr "硬化钢" @@ -265,8 +281,9 @@ msgstr "不锈钢" msgid "Tungsten Carbide" msgstr "碳化钨" +# AI Translated msgid "The toolhead and hotend rack may move. Please keep your hands away from the chamber." -msgstr "工具头和热端架可能会运动，请勿将手伸入机箱。" +msgstr "工具头和热端架可能会运动，请勿将手伸入腔体内。" msgid "Warning" msgstr "警告" @@ -283,8 +300,9 @@ msgstr "重新读取全部" msgid "Reading the hotends, please wait." msgstr "正在读取热端信息，请稍候。" +# AI Translated msgid "During the hotend upgrade, the toolhead will move. Don't reach into the chamber." -msgstr "在热端升级过程中，工具头会移动。请勿将手伸入机箱内。" +msgstr "在热端升级过程中，工具头会移动。请勿将手伸入腔体内。" msgid "Update" msgstr "更新" @@ -388,9 +406,10 @@ msgstr "序列号" msgid "Version" msgstr "版本" +# AI Translated #, c-format, boost-format msgid "Used Time: %s" -msgstr "使用时间: %s" +msgstr "使用时间：%s" msgid "Dynamic nozzles are allocated on the current plate. Picking hotend is not supported." msgstr "当前盘存在动态分配喷嘴，不支持修改。" @@ -431,8 +450,9 @@ msgstr "画刷尺寸" msgid "Smart fill angle" msgstr "智能填充角度" +# AI Translated msgid "Gap area" -msgstr "间隙面积" +msgstr "缝隙面积" msgid "Left mouse button" msgstr "鼠标左键" @@ -452,8 +472,9 @@ msgstr "擦除" msgid "Mouse wheel" msgstr "鼠标滚轮" +# AI Translated msgid "Auto support threshold angle: " -msgstr "自动支撑角度阈值：" +msgstr "自动支撑角度阈值： " msgid "Circle" msgstr "圆" @@ -539,8 +560,9 @@ msgstr "画刷" msgid "Smart fill" msgstr "智能填充" +# AI Translated msgid "Bucket fill" -msgstr "批量填充" +msgstr "油漆桶填充" msgid "Height range" msgstr "高度范围" @@ -576,21 +598,25 @@ msgstr "高度范围" msgid "Remove painted color" msgstr "移除已绘制的颜色" +# AI Translated #, boost-format msgid "Painted using: Filament %1%" -msgstr "绘制使用：耗材丝%1%" +msgstr "使用耗材丝 %1% 绘制" msgid "To:" msgstr "到：" +# AI Translated msgid "Entering color painting" -msgstr "进入颜色绘制" +msgstr "进入涂色" +# AI Translated msgid "Leaving color painting" -msgstr "离开颜色绘制" +msgstr "离开涂色" +# AI Translated msgid "Color painting editing" -msgstr "颜色绘制编辑" +msgstr "涂色编辑" msgid "Paint-on fuzzy skin" msgstr "手绘绒毛表面" @@ -730,17 +756,20 @@ msgstr "选中" msgid "Plate" msgstr "盘" +# AI Translated msgid "Distribute" -msgstr "" +msgstr "分布" msgid "Coordinate system used for transform actions." msgstr "用于变换操作的坐标系" +# AI Translated msgid "Reference for alignment" -msgstr "" +msgstr "对齐基准" +# AI Translated msgid "Select at least 3 parts or objects" -msgstr "" +msgstr "请至少选择 3 个零件或对象" # AI Translated msgid "Align left" @@ -790,11 +819,14 @@ msgstr "前后均匀分布" msgid "Distribute top-bottom" msgstr "上下均匀分布" +# AI Translated +# Needs human review: Check 落板 reads right on the Move gizmo button and the object-list menu item; 落到热床 is the longer alternative. msgid "Drop" -msgstr "下降" +msgstr "落板" +# AI Translated msgid "Move the selection along Z so that its lowest point touches the bed." -msgstr "" +msgstr "沿 Z 轴移动所选项，使其最低点接触热床。" msgid "Absolute" msgstr "绝对" @@ -834,14 +866,18 @@ msgstr "插销" msgid "Dowel" msgstr "销钉" +# AI Translated +# Needs human review: Inherited from BambuStudio (按扣); confirm 卡扣 reads right next to 插销/销钉 in the Cut tool connector types. msgid "Snap" -msgstr "按扣" +msgstr "卡扣" +# AI Translated msgid "Prism" -msgstr "棱角" +msgstr "棱柱" +# AI Translated msgid "Frustum" -msgstr "锥体" +msgstr "锥台" msgid "Square" msgstr "正方形" @@ -1033,8 +1069,9 @@ msgstr "切割后" msgid "Cut to parts" msgstr "切割为零件" +# AI Translated msgid "Reset cutting plane and remove connectors" -msgstr "重置切割平面并移除连接器" +msgstr "重置切割平面并移除连接件" # AI Translated msgid "Reset Cut" @@ -1100,8 +1137,9 @@ msgstr "修复模型对象" msgid "Cut by line" msgstr "按线切割" +# AI Translated msgid "Delete connector" -msgstr "删除连接器" +msgstr "删除连接件" msgid "Entering Cut gizmo" msgstr "进入切割小工具" @@ -1175,26 +1213,32 @@ msgstr "维基指南" msgid "Video Guide" msgstr "视频指南" +# AI Translated msgid "Enforce seam" -msgstr "添加Z缝" +msgstr "强制接缝" +# AI Translated msgid "Block seam" -msgstr "屏蔽Z缝" +msgstr "屏蔽接缝" +# AI Translated msgid "Seam painting" -msgstr "Z缝绘制" +msgstr "接缝绘制" msgid "Remove selection" msgstr "移除绘制" +# AI Translated msgid "Entering seam painting" -msgstr "进入Z缝绘制" +msgstr "进入接缝绘制" +# AI Translated msgid "Leaving Seam painting" -msgstr "退出Z缝绘制" +msgstr "退出接缝绘制" +# AI Translated msgid "Paint-on seam editing" -msgstr "编辑手绘填缝" +msgstr "手绘接缝编辑" #. TRN - Title in Undo/Redo stack after rotate with text around emboss axe msgid "Text rotate" @@ -1266,8 +1310,9 @@ msgstr "无法使用所选字体书写文本。请尝试选择其他字体。" msgid "Embossed text cannot contain only white spaces." msgstr "浮雕文本不能只包含空格。" +# AI Translated msgid "Text contains character glyph (represented by '?') unknown by font." -msgstr "文本包含字体未知的字符字形（用“？”表示）。" +msgstr "文本中包含该字体不支持的字符（以 '?' 表示）。" msgid "Text input doesn't show font skew." msgstr "文本输入不显示字体倾斜。" @@ -1278,11 +1323,13 @@ msgstr "文本输入不显示字体加粗。" msgid "Text input doesn't show gap between lines." msgstr "文本输入不显示行之间的间隙。" +# AI Translated msgid "Too tall, diminished font height inside text input." -msgstr "太高，文本输入中的字体高度减小。" +msgstr "字体过高，已在文本输入框中缩小显示。" +# AI Translated msgid "Too small, enlarged font height inside text input." -msgstr "文字输入里面的字体高度太小，放大了。" +msgstr "字体过小，已在文本输入框中放大显示。" msgid "Text doesn't show current horizontal alignment." msgstr "文本不显示当前水平对齐方式" @@ -1302,15 +1349,19 @@ msgstr "操作" msgid "Join" msgstr "合并" +# AI Translated msgid "Click to change text into object part." -msgstr "单击可将文本更改为对象部分。" +msgstr "单击可将文本更改为零件。" +# AI Translated msgid "You can't change a type of the last solid part of the object." -msgstr "不能更改对象的最后一个实体部分的类型。" +msgstr "无法更改对象中最后一个实体零件的类型。" +# AI Translated +# Needs human review: Check 切除 reads right next to 合并 and 修改器 on the Emboss/SVG operation buttons. msgctxt "EmbossOperation" msgid "Cut" -msgstr "切割" +msgstr "切除" msgid "Click to change part type into negative volume." msgstr "单击可将零件类型更改为负体积。" @@ -1385,9 +1436,10 @@ msgstr "您确定要永久删除“%1%”样式吗？" msgid "Delete \"%1%\" style." msgstr "删除“%1%”样式。" +# AI Translated #, boost-format msgid "Can't delete \"%1%\". It is last style." -msgstr "无法删除“%1%”。这是最后一种风格。" +msgstr "无法删除“%1%”，这是最后一个样式。" #, boost-format msgid "Can't delete temporary style \"%1%\"." @@ -1401,6 +1453,7 @@ msgstr "已修改样式“%1%”" msgid "Current style is \"%1%\"" msgstr "当前样式为“%1%”" +# AI Translated #, boost-format msgid "" "Changing style to \"%1%\" will discard current style modification.\n" @@ -1408,6 +1461,7 @@ msgid "" "Would you like to continue anyway?" msgstr "" "将样式更改为“%1%”将放弃当前的样式修改。\n" +"\n" "是否仍要继续？" msgid "Not valid style." @@ -1545,12 +1599,15 @@ msgstr "使文字朝向相机。" msgid "Font \"%1%\" can't be used. Please select another." msgstr "字体\"%1%\"无法使用，请选择其他字体" +# AI Translated #, boost-format msgid "Can't load exactly same font (\"%1%\"). Application selected a similar one (\"%2%\"). You have to specify font for enable edit text." -msgstr "不能加载完全相同的字体(\"%1%\")。应用程序选择了一种类似的字体（\"%2%\"）。你必须为启用编辑文本指定字体。" +msgstr "无法加载完全相同的字体（\"%1%\"），已改用相似的字体（\"%2%\"）。要编辑文本，必须指定字体。" +# AI Translated +# Needs human review: Check 无字符 reads right after a font name in the emboss font list, where it marks a font that cannot render the text. msgid "No symbol" -msgstr "无符号" +msgstr "无字符" msgid "Loading" msgstr "载入中" @@ -1615,11 +1672,12 @@ msgstr "距表面" msgid "Keep up" msgstr "保持向上" +# AI Translated #. TRN - Input label. Be short as possible. #. Some Font file contain multiple fonts inside and #. this is numerical selector of font inside font collections msgid "Collection" -msgstr "收集" +msgstr "字体集" #. TRN - Title in Undo/Redo stack after rotate with SVG around emboss axe msgid "SVG rotate" @@ -1658,34 +1716,39 @@ msgstr "线性渐变" msgid "Radial gradient" msgstr "径向渐变" +# AI Translated msgid "Open filled path" -msgstr "打开填充路径" +msgstr "填充路径未闭合" msgid "Undefined stroke type" msgstr "未定义的描边类型" +# AI Translated msgid "Path can't be healed from self-intersection and multiple points." -msgstr "路径无法从自相交和多点中修复" +msgstr "无法修复路径中的自相交和重复点。" msgid "Final shape contains self-intersection or multiple points with same coordinate." msgstr "最终形状包含自相交或相同坐标的多点" +# AI Translated #, boost-format msgid "Shape is marked as invisible (%1%)." -msgstr "形状已被标记为不可见 (%1%)." +msgstr "形状已被标记为不可见 (%1%)。" +# AI Translated #. TRN: The first placeholder is shape identifier, the second is text describing the problem. #, boost-format msgid "Fill of shape (%1%) contains unsupported: %2%." -msgstr "形状填充（%1%）包含不受支持的：%2%。" +msgstr "形状（%1%）的填充包含不受支持的内容：%2%。" #, boost-format msgid "Stroke of shape (%1%) is too thin (minimal width is %2% mm)." msgstr "形状 (%1%) 的描边太细了（不小于 %2% mm）。" +# AI Translated #, boost-format msgid "Stroke of shape (%1%) contains unsupported: %2%." -msgstr "形状笔划（%1%）包含不受支持的：%2%。" +msgstr "形状（%1%）的描边包含不受支持的内容：%2%。" # AI Translated msgid "Not valid state please report reproduction steps on github" @@ -1718,8 +1781,9 @@ msgstr "SVG文件路径：\"%1%\"" msgid "Reload SVG file from disk." msgstr "从磁盘重新加载SVG文件。" +# AI Translated msgid "Change file" -msgstr "改变文件" +msgstr "更换文件" msgid "Change to another SVG file." msgstr "更改为另一个 SVG 文件。" @@ -1738,9 +1802,10 @@ msgstr "" msgid "Bake" msgstr "烘焙" +# AI Translated #. TRN: Tooltip for the menu item. msgid "Bake into model as uneditable part" -msgstr "将模型烘焙为不可编辑的部分" +msgstr "烘焙到模型中，成为不可编辑的零件" msgid "Save as" msgstr "另存为" @@ -1798,8 +1863,9 @@ msgstr "SVG 形状" msgid "Mirror" msgstr "镜像" +# AI Translated msgid "Choose SVG file for emboss:" -msgstr "选择SVG文件进行浮雕操作:" +msgstr "选择SVG文件进行浮雕操作：" #, boost-format msgid "File does NOT exist (%1%)." @@ -1863,8 +1929,9 @@ msgctxt "Keyboard Shortcut" msgid "Esc" msgstr "Esc" +# AI Translated msgid "Cancel a feature until exit" -msgstr "取消一个特征直到退出" +msgstr "逐个取消已选特征，直至退出" msgid "Measure" msgstr "测量" @@ -1872,8 +1939,9 @@ msgstr "测量" msgid "Please confirm explosion ratio = 1, and please select at least one object." msgstr "请确保爆炸比例为1，且至少选择一个对象" +# AI Translated msgid "Edit to scale" -msgstr "编辑比例" +msgstr "编辑数值以缩放" msgctxt "Verb" msgid "Scale all" @@ -1908,28 +1976,33 @@ msgstr "点 2（移动）" msgid "Selection 1" msgstr "选中项 1" +# AI Translated msgid "" "Select 2 faces on objects and \n" " make objects assemble together." msgstr "" -"在两个物体上选择两个面 \n" -"并将物体组合在一起。" +"在两个对象上选择两个面 \n" +"并将对象组合在一起。" +# AI Translated msgid "" "Select 2 points or circles on objects and \n" " specify distance between them." msgstr "" -"在两个物体上选择两个点或圆 \n" +"在两个对象上选择两个点或圆 \n" "并指定它们之间的距离。" # AI Translated msgid "Selection 2" msgstr "选中项 2" +# AI Translated msgid "" "Feature 1 has been reset, \n" "feature 2 has been feature 1" -msgstr "特征1已经被重置，特征2变成特征1" +msgstr "" +"特征1已被重置，\n" +"特征2已变为特征1" msgid "Copy to clipboard" msgstr "复制到剪贴板" @@ -1961,8 +2034,9 @@ msgstr "特征1" msgid "Reverse rotation" msgstr "反转方向" +# AI Translated msgid "Rotate around center:" -msgstr "绕中心旋转:" +msgstr "绕中心旋转：" msgid "Parallel distance:" msgstr "平行距离：" @@ -1979,7 +2053,7 @@ msgstr "离开测量小工具" # AI Translated msgctxt "Assembly tool" msgid "Assemble" -msgstr "组合" +msgstr "装配" msgid "Please confirm explosion ratio = 1 and select at least two volumes." msgstr "请确认爆炸比例 = 1 并选择至少两个部件。" @@ -1993,22 +2067,26 @@ msgstr "（移动中）" msgid "Point and point assembly" msgstr "点对点装配" +# AI Translated msgid "Warning: please select two different meshes." -msgstr "警告:请选择两个不同的网格。" +msgstr "警告：请选择两个不同的网格。" +# AI Translated msgid "Warning: please select Plane's feature." -msgstr "警告:请选择面特征。" +msgstr "警告：请选择面特征。" +# AI Translated msgid "Warning: please select Point's or Circle's feature." -msgstr "警告:请选择点或圆特征。" +msgstr "警告：请选择点或圆特征。" +# AI Translated msgid "" "It is recommended to assemble objects first,\n" "because they are restricted to the bed \n" "and only parts can be lifted." msgstr "" "建议先组合对象，\n" -"因为对象被固定在打印床上，\n" +"因为对象被固定在热床上，\n" "只有零件可以被抬起。" msgid "Face and face assembly" @@ -2020,17 +2098,21 @@ msgstr "进入装配小工具" msgid "Leaving Assembly gizmo" msgstr "离开装配小工具" +# AI Translated msgid "Parts of a cut object cannot be moved" -msgstr "" +msgstr "切割对象的零件无法移动" +# AI Translated msgid "Aligning to the plate is available in X and Y only" -msgstr "" +msgstr "对齐到盘仅适用于 X 和 Y 方向" +# AI Translated msgid "Turn off Auto-Drop for the selected objects to move them in Z" -msgstr "" +msgstr "要沿 Z 轴移动所选对象，请先关闭其“自动落板”" +# AI Translated msgid "All selected objects must be on the same plate" -msgstr "" +msgstr "所有选中的对象必须位于同一个盘上" msgid "Shift+" msgstr "Shift+" @@ -2051,8 +2133,9 @@ msgstr "未定义" msgid "%1% was replaced with %2%" msgstr "%1%已被%2%替换" +# AI Translated msgid "The configuration may be generated by a newer version of OrcaSlicer." -msgstr "此配置可能由新版本的逆戟鲸切片器生成" +msgstr "此配置可能由新版本的 OrcaSlicer 生成。" msgid "Some values have been replaced. Please check them:" msgstr "部分数值已被替换，请检查：" @@ -2196,12 +2279,13 @@ msgstr "访问码不正确" msgid "Connect %s failed! [SN:%s, code=%s]" msgstr "连接 %s 失败。[SN:%s, code=%s]" +# AI Translated msgid "" "Orca Slicer requires the Microsoft WebView2 Runtime to operate certain features.\n" "Click Yes to install it now." msgstr "" "Orca Slicer 依赖 Microsoft WebView2 运行时以运行部分功能。\n" -"请点击 Yes 进行安装。" +"请点击“是”立即安装。" msgid "WebView2 Runtime" msgstr "WebView2 运行库" @@ -2221,18 +2305,22 @@ msgstr "" msgid "Resources path does not exist or is not a directory: %s" msgstr "资源路径不存在或不是目录：%s" +# AI Translated #, c-format, boost-format msgid "" "%s\n" "Do you want to continue?" -msgstr "%s 是否继续？" +msgstr "" +"%s\n" +"是否继续？" msgid "Remember my choice" msgstr "记住我的选择" +# AI Translated #, c-format, boost-format msgid "Click to download new version in default browser: %s" -msgstr "在默认浏览器中点击下载最新版本: %s" +msgstr "点击以在默认浏览器中下载新版本：%s" msgid "OrcaSlicer needs an update" msgstr "OrcaSlicer 需要更新" @@ -2257,8 +2345,9 @@ msgstr "插件 %s 已不再可用。" msgid "Plugin %s access is unauthorized." msgstr "插件 %s 的访问未获授权。" +# AI Translated msgid "Loading printer & filament profiles" -msgstr "正在加载打印机和耗材配置文件" +msgstr "正在加载打印机和耗材丝配置文件" msgid "Creating main window" msgstr "正在创建主窗口" @@ -2290,11 +2379,13 @@ msgstr "加载模式视图" msgid "Choose one file (3MF):" msgstr "选择一个文件（3MF）：" +# AI Translated msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" -msgstr "选择一个或多个文件(3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY):" +msgstr "选择一个或多个文件（3MF/STEP/STL/SVG/OBJ/AMF/USD*/ABC/PLY）：" +# AI Translated msgid "Choose one or more files (3MF/STEP/STL/SVG/OBJ/AMF):" -msgstr "选择一个或多个文件（3mf/step/STL/svg/obj/amf）：" +msgstr "选择一个或多个文件（3MF/STEP/STL/SVG/OBJ/AMF）：" msgid "Choose ZIP file" msgstr "选择ZIP文件" @@ -2315,23 +2406,28 @@ msgstr "您可以将修改后的预设保留给新项目、放弃修改，或将 msgid "User logged out" msgstr "用户登出" +# AI Translated msgid "You are currently in Stealth Mode. To log into the Cloud, you need to disable Stealth Mode first." -msgstr "您当前处于局域网模式。要登录云端，需要先禁用局域网模式。" +msgstr "您当前处于隐身模式。要登录云端，需要先禁用隐身模式。" +# AI Translated msgid "Stealth Mode" -msgstr "局域网模式" +msgstr "隐身模式" +# AI Translated msgid "Quit Stealth Mode" -msgstr "退出局域网模式" +msgstr "退出隐身模式" +# AI Translated msgid "new or open project file is not allowed during the slicing process!" -msgstr "在切片过程不允许新建或打开项目文件！" +msgstr "切片过程中不允许新建或打开项目文件！" msgid "Open Project" msgstr "打开项目" +# AI Translated msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally." -msgstr "此逆戟鲸切片器的版本过低，需更新至最新版本方可正常使用" +msgstr "Orca Slicer 版本过低，需更新至最新版本方可正常使用。" msgid "Cloud sync conflict:" msgstr "云同步冲突：" @@ -2340,12 +2436,13 @@ msgstr "云同步冲突：" msgid "Cloud sync conflict for preset \"%s\":" msgstr "预设 \"%s\" 云同步冲突：" +# AI Translated msgid "" "This preset has a newer version in OrcaCloud.\n" "Pull downloads the cloud copy. Force push overwrites it with your local preset." msgstr "" "该预设在 OrcaCloud 中有更新版本。\n" -"拉取会下载云端副本。强制推送会用您的本地预设覆盖该副本" +"拉取会下载云端副本。强制推送会用您的本地预设覆盖该副本。" msgid "" "A preset with this name already exists in OrcaCloud.\n" @@ -2375,13 +2472,14 @@ msgstr "" "强制推送将用您本地的预设更改覆盖云端副本。\n" "是否继续？" +# AI Translated #, c-format, boost-format msgid "" "Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n" "Do you want to continue?" msgstr "" "强制推送将用您的本地更改覆盖预设 \"%s\" 的云端副本。\n" -"你希望继续吗？" +"是否继续？" msgid "Resolve cloud sync conflict" msgstr "解决云同步冲突" @@ -2450,14 +2548,14 @@ msgid "" "\n" "Add those printers back to your presets now? Your presets are backed up first. You can also do this later from Help > Migrate Filament Presets." msgstr "" -"OrcaSlicer 2.5.0 重构了许多系统耗材丝预设，以修复不正确的配置文件并为未来功能做准备。因此，下列预设不再显示在部分其原本适用的打印机上。给您带来不便，我们深表歉意；这是一次性修复。\n" +"OrcaSlicer 2.5.0 重构了许多系统耗材丝预设，以修复不正确的配置文件并为未来功能做准备。因此，下列预设在其原本适用的部分打印机上不再显示。给您带来不便，我们深表歉意；这是一次性修复。\n" "\n" -"现在将这些打印机重新添加到您的预设中吗？操作前会先备份您的预设。您也可以稍后通过 帮助 > 迁移耗材丝预设 执行此操作。" +"是否现在将这些打印机重新添加到您的预设中？操作前会先备份您的预设。您也可以稍后通过 帮助 > 迁移耗材丝预设 执行此操作。" # AI Translated #, boost-format msgid "%1% (based on %2%)" -msgstr "%1% (基于 %2%)" +msgstr "%1%（基于 %2%）" msgid "Don't remind me again" msgstr "不再提醒" @@ -2630,8 +2728,9 @@ msgstr "正在为应用程序切换语言" msgid "The uploads are still ongoing" msgstr "上传任务依然在继续" +# AI Translated msgid "Stop them and continue anyway?" -msgstr "停止它们并且继续？" +msgstr "是否停止这些上传并继续？" msgid "Ongoing uploads" msgstr "正在进行的上传" @@ -2660,8 +2759,9 @@ msgstr "打开" msgid "Rename" msgstr "重命名" +# AI Translated msgid "Orca Slicer GUI initialization failed" -msgstr "逆戟鲸切片器图形界面初始化失败" +msgstr "Orca Slicer 图形界面初始化失败" #, boost-format msgid "Fatal error, exception: %1%" @@ -2688,8 +2788,9 @@ msgstr "速度" msgid "Strength" msgstr "强度" +# AI Translated msgid "Top solid layers" -msgstr "顶部壳体层数" +msgstr "顶部外壳层数" msgid "Top minimum shell thickness" msgstr "顶部外壳最小厚度" @@ -2718,14 +2819,16 @@ msgstr "挤出机" msgid "Extrusion width" msgstr "挤出宽度" +# AI Translated msgid "Wipe options" -msgstr "擦除选项" +msgstr "擦拭选项" msgid "Bed adhesion" msgstr "热床粘接" +# AI Translated msgid "Add Part" -msgstr "添加部件" +msgstr "添加零件" msgid "Add Negative Part" msgstr "添加负零件" @@ -2752,8 +2855,9 @@ msgstr "添加负文本" msgid "Add text modifier" msgstr "添加文本修改器" +# AI Translated msgid "Add SVG part" -msgstr "添加svg零件" +msgstr "添加SVG零件" msgid "Add negative SVG" msgstr "添加负零件SVG" @@ -2812,11 +2916,14 @@ msgstr "OrcaSliced 复合模型" msgid "Orca Badge" msgstr "Orca 徽章" +# AI Translated msgid "Orca Tolerance Test" -msgstr "Orca误差测试" +msgstr "Orca公差测试" +# AI Translated +# Needs human review: Check whether 3DBenchy alone is clear, or 3DBenchy 小船 reads better. msgid "3DBenchy" -msgstr "小船" +msgstr "3DBenchy" msgid "Cali Cat" msgstr "卡利猫" @@ -2833,15 +2940,13 @@ msgstr "斯坦福兔子" msgid "Orca String Hell" msgstr "Orca拉丝地狱" +# AI Translated msgid "" "This model features text embossment on the top surface. For optimal results, it is advisable to set the 'One Wall Threshold (min_width_top_surface)' to 0 for the 'Only One Wall on Top Surfaces' to work best.\n" "Yes - Change these settings automatically\n" "No - Do not change these settings for me" msgstr "" -"该模型顶面具有文字浮雕。\n" -"为了获得最佳效果，我们推荐您将“单层墙阈值”设置为 0 以使“仅首层单层墙”效果最佳。\n" -"\n" -"自动调整这些设置？\n" +"该模型顶面带有文字浮雕。为获得最佳效果，建议将“单层墙阈值（min_width_top_surface）”设为 0，使“顶面单层墙”发挥最佳效果。\n" "是 - 自动调整这些设置\n" "否 - 不用为我调整这些设置" @@ -2866,8 +2971,9 @@ msgstr "负零件" msgid "Support Blocker" msgstr "支撑屏蔽器" +# AI Translated msgid "Support Enforcer" -msgstr "支撑添加器" +msgstr "支撑生成器" # AI Translated msgid "Precise Seam" @@ -2882,11 +2988,13 @@ msgstr "设置为独立对象" msgid "Set as Individual Objects" msgstr "设置为独立对象" +# AI Translated msgid "Fill bed with copies" -msgstr "铺满打印板" +msgstr "用副本铺满热床" +# AI Translated msgid "Fill the remaining area of bed with copies of the selected object" -msgstr "用选定对象的副本填充床的剩余区域" +msgstr "用所选对象的副本填满热床的剩余区域" msgid "Printable" msgstr "可打印的" @@ -2894,8 +3002,9 @@ msgstr "可打印的" msgid "Auto Drop" msgstr "自动落板" +# AI Translated msgid "Automatically drops the selected object to the build plate." -msgstr "自动将选中的对象落到打印板上" +msgstr "自动将选中的对象落到热床上。" msgid "Fix Model" msgstr "修复模型" @@ -2909,8 +3018,9 @@ msgstr "导出为多个STL" msgid "Export as one DRC" msgstr "作为一个 DRC 导出" +# AI Translated msgid "Export as DRCs" -msgstr "导出为 DRC" +msgstr "导出为多个 DRC" msgid "Reload from disk" msgstr "从磁盘重新加载" @@ -2939,18 +3049,21 @@ msgstr "设置所选项的耗材丝" msgid "Default" msgstr "默认" +# AI Translated #, c-format, boost-format msgid "Filament %d" -msgstr "耗材 %d" +msgstr "耗材丝 %d" msgid "current" msgstr "当前" +# AI Translated msgid "Scale to build volume" -msgstr "缩放到构建空间大小" +msgstr "缩放到构建体积" +# AI Translated msgid "Scale an object to fit the build volume" -msgstr "缩放对象以适应构建空间大小" +msgstr "缩放对象以适应构建体积" msgid "Flush Options" msgstr "换料冲刷选项" @@ -3080,8 +3193,9 @@ msgstr "拆分到对象" msgid "Split the selected object into multiple objects" msgstr "拆分所选对象为多个对象" +# AI Translated msgid "To Parts" -msgstr "到零件" +msgstr "拆分到零件" msgid "Split the selected object into multiple parts" msgstr "拆分所选对象为多个零件" @@ -3108,8 +3222,9 @@ msgstr "与其合并" msgid "Decompose Color" msgstr "分解颜色" +# AI Translated msgid "Delete this filament" -msgstr "移除此耗材" +msgstr "移除此耗材丝" msgid "Select All" msgstr "全选" @@ -3117,11 +3232,13 @@ msgstr "全选" msgid "Select all objects on the current plate" msgstr "全选当前盘对象" +# AI Translated msgid "Select All Plates" -msgstr "全选所有打印板" +msgstr "全选所有盘" +# AI Translated msgid "Select all objects on all plates" -msgstr "选择所有打印板上的所有对象" +msgstr "选择所有盘上的所有对象" msgid "Delete All" msgstr "删除所有" @@ -3172,26 +3289,31 @@ msgstr "删除所选盘" msgid "Add instance" msgstr "增加实例" +# AI Translated msgid "Add one more instance of the selected object" -msgstr "为选中物体增加一个实例" +msgstr "为选中对象增加一个实例" msgid "Remove instance" msgstr "移除实例" +# AI Translated msgid "Remove one instance of the selected object" -msgstr "为选中物体移除一个实例" +msgstr "为选中对象移除一个实例" msgid "Set number of instances" msgstr "设置实例数量" +# AI Translated msgid "Change the number of instances of the selected object" -msgstr "更改选中物体的实例数量" +msgstr "更改选中对象的实例数量" +# AI Translated msgid "Fill bed with instances" -msgstr "用实例铺满打印板" +msgstr "用实例铺满热床" +# AI Translated msgid "Fill the remaining area of bed with instances of the selected object" -msgstr "用选中物体的实例填充打印板" +msgstr "用所选对象的实例填满热床的剩余区域" msgid "Clone" msgstr "克隆" @@ -3234,8 +3356,9 @@ msgstr "更换耗材丝" msgid "Set Filament for selected items" msgstr "设置所选项的耗材丝" +# AI Translated msgid "Automatically snaps the selected object to the build plate." -msgstr "自动将选中的对象吸附到打印板上" +msgstr "自动将选中的对象吸附到热床上。" msgid "Unlock" msgstr "解锁" @@ -3290,8 +3413,9 @@ msgstr "点击此图标可切换这个对象的可打印属性" msgid "Click the icon to edit support painting of the object" msgstr "点击此图标可编辑这个对象的支撑绘制" +# AI Translated msgid "Click the icon to edit color painting for the object" -msgstr "点击此图标可编辑这个对象的颜色绘制" +msgstr "点击此图标可编辑这个对象的涂色" msgid "Click the icon to shift this object to the bed" msgstr "点击这个图标可将对象移动到热床上" @@ -3307,7 +3431,7 @@ msgstr "粘贴设置" # AI Translated msgid "Shift objects to bed" -msgstr "将物体下移至热床" +msgstr "将对象下移至热床" msgid "Object order changed" msgstr "对象顺序已更改" @@ -3422,11 +3546,13 @@ msgstr "添加层" msgid "Cut Connectors information" msgstr "切割连接件信息" +# AI Translated msgid "Object manipulation" -msgstr "操作对象" +msgstr "对象操作" +# AI Translated msgid "Group manipulation" -msgstr "操作组" +msgstr "组操作" msgid "Object Settings to Modify" msgstr "要修改的对象设置" @@ -3434,8 +3560,9 @@ msgstr "要修改的对象设置" msgid "Part Settings to Modify" msgstr "要修改的零件设置" +# AI Translated msgid "Layer Range Settings to Modify" -msgstr "要修改的图层范围设置" +msgstr "要修改的层范围设置" msgid "Part manipulation" msgstr "零件操作" @@ -3507,8 +3634,9 @@ msgstr "\"%s\" 在此次细分后将超过 100 万个面，这可能会增加切 msgid "\"%s\" part's mesh contains errors. Please repair it first." msgstr "\"%s\" 零件的网格包含错误，请先修复。" +# AI Translated msgid "Change Filaments" -msgstr "更改耗材" +msgstr "更改耗材丝" msgid "Additional process preset" msgstr "附加工艺预设" @@ -3610,8 +3738,9 @@ msgstr "模板" msgid "Custom" msgstr "自定义" +# AI Translated msgid "Pause:" -msgstr "暂停" +msgstr "暂停：" msgid "Custom Template:" msgstr "自定义模板：" @@ -3628,8 +3757,9 @@ msgstr "输入当前层上使用的自定义G-code：" msgid "Jump to layer" msgstr "跳转到层" +# AI Translated msgid "Please enter the layer number." -msgstr "请输入层数" +msgstr "请输入层号。" msgid "Add Pause" msgstr "添加暂停打印" @@ -3703,8 +3833,9 @@ msgstr "无法连接打印机" msgid "Connection to printer failed" msgstr "连接打印机失败" +# AI Translated msgid "Please check the network connection of the printer and Orca." -msgstr "请检查打印机和工作室的网络连接" +msgstr "请检查打印机和 OrcaSlicer 的网络连接。" msgid "Connecting..." msgstr "连接中..." @@ -3721,8 +3852,9 @@ msgstr "退料" msgid "Choose an AMS slot then press \"Load\" or \"Unload\" button to automatically load or unload filament." msgstr "选择一个AMS槽位，然后点击“进料”或“退料”按钮以自动进退料。" +# AI Translated msgid "Filament type is unknown which is required to perform this action. Please set target filament's informations." -msgstr "因耗材类型未知，所以需要执行此操作。请指定目标耗材的信息。" +msgstr "执行此操作需要耗材丝类型，但当前类型未知。请设置目标耗材丝的信息。" msgid "AMS has not been initialized. Please initialize it before use." msgstr "AMS 尚未初始化。请在使用前进行初始化。" @@ -3765,11 +3897,13 @@ msgstr "全速冷却" msgid "Init" msgstr "初始化" +# AI Translated msgid "Chamber" -msgstr "打印舱" +msgstr "腔体" +# AI Translated msgid "Innerloop" -msgstr "内环" +msgstr "内循环" msgid "Top" msgstr "顶部" @@ -3777,11 +3911,13 @@ msgstr "顶部" msgid "The fan controls the temperature during printing to improve print quality. The system automatically adjusts the fan's switch and speed according to different printing materials." msgstr "风扇会在打印过程中控制温度以提升质量。此系统会根据各类耗材自动调整风扇开关和速度。" +# AI Translated msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials and filters the chamber air." -msgstr "冷却模式适合打印PLA、PETG、TPU等材料，同时过滤舱内空气。" +msgstr "冷却模式适合打印PLA、PETG、TPU等材料，同时过滤腔体内空气。" +# AI Translated msgid "Heating mode is suitable for printing ABS/ASA/PC/PA materials and circulates filters the chamber air." -msgstr "加热模式适合打印ABS、ASA、PC、PA等材料，同时循环和过滤舱内空气。" +msgstr "加热模式适合打印ABS、ASA、PC、PA等材料，同时循环和过滤腔体内空气。" msgid "Strong cooling mode is suitable for printing PLA/TPU materials. In this mode, the printouts will be fully cooled." msgstr "强冷模式适合打印PLA、TPU等材料，此模式会尽可能完全冷却打印件。" @@ -3789,13 +3925,15 @@ msgstr "强冷模式适合打印PLA、TPU等材料，此模式会尽可能完全 msgid "Cooling mode is suitable for printing PLA/PETG/TPU materials." msgstr "冷却模式适合打印PLA、PETG、TPU等材料。" +# AI Translated msgctxt "air_duct" msgid "Right(Aux)" -msgstr "右侧（辅助）" +msgstr "右（辅助）" +# AI Translated msgctxt "air_duct" msgid "Right(Filter)" -msgstr "右侧（过滤器）" +msgstr "右（过滤）" msgctxt "air_duct" msgid "Left(Aux)" @@ -3806,8 +3944,9 @@ msgctxt "Hotend Heat Breaker Fan" msgid "Hotend" msgstr "热端" +# AI Translated msgid "Parts" -msgstr "打印件" +msgstr "部件" msgid "Aux" msgstr "辅助" @@ -3869,14 +4008,17 @@ msgstr "切换热端" msgid "Wait for AMS cooling" msgstr "等待 AMS 冷却" +# AI Translated msgid "Switch current filament at Filament Track Switch" -msgstr "切换变轨器的当前耗材" +msgstr "切换变轨器的当前耗材丝" +# AI Translated msgid "Pull back current filament at Filament Track Switch" -msgstr "退回变轨器的当前耗材" +msgstr "退回变轨器的当前耗材丝" +# AI Translated msgid "Switch track at Filament Track Switch" -msgstr "变轨器开关切换" +msgstr "变轨器切换轨道" # AI Translated #. TRN AMS unit number, then slot number @@ -3999,20 +4141,24 @@ msgstr "未知" msgid "Done." msgstr "完成" +# AI Translated msgid "" "All the selected objects are on a locked plate.\n" "Cannot auto-arrange these objects." msgstr "" "所有选中的对象都处于被锁定的盘上，\n" -"无法对这些对象做自动摆盘。" +"无法对这些对象做自动摆放。" msgid "No arrangeable objects are selected." msgstr "没有可摆盘的对象被选中。" +# AI Translated msgid "" "This plate is locked.\n" "Cannot auto-arrange on this plate." -msgstr "该盘处于锁定状态，无法对其进行自动摆盘。" +msgstr "" +"该盘已锁定。\n" +"无法在此盘上自动摆放。" msgid "Arranging..." msgstr "自动摆放中..." @@ -4043,12 +4189,13 @@ msgstr "已完成自动摆放。" msgid "Arrange failed. Found some exceptions when processing object geometries." msgstr "自动摆放失败，处理对象几何数据时遇到异常。" +# AI Translated #, c-format, boost-format msgid "" "Arrangement ignored the following objects which can't fit into a single bed:\n" "%s" msgstr "" -"自动摆放会忽略以下无法放入单盘的零件：\n" +"自动摆放忽略了以下无法放入单个热床的对象：\n" "%s" msgid "" @@ -4296,14 +4443,16 @@ msgstr "没有有效的表面用于文字投影。" msgid "An unexpected error occurred" msgstr "发生了意外错误" +# AI Translated msgid "Thermal Preconditioning for first layer optimization" -msgstr "用于第一层优化的热预处理" +msgstr "用于首层优化的热预处理" msgid "Remaining time: Calculating..." msgstr "剩余时间：正在计算..." +# AI Translated msgid "The heated bed's thermal preconditioning helps optimize the first layer print quality. Printing will start once preconditioning is complete." -msgstr "加热床的热预处理有助于优化第一层打印质量。预处理完成后，打印将开始。" +msgstr "热床的热预处理有助于优化首层打印质量。预处理完成后将开始打印。" #, c-format, boost-format msgid "Remaining time: %dmin%ds" @@ -4324,8 +4473,9 @@ msgstr "导入完成。" msgid "The imported SLA archive did not contain any presets. The current SLA presets were used as fallback." msgstr "导入的SLA存档不包含任何预设。当前的SLA预设被用作备用选项。" +# AI Translated msgid "You cannot load an SLA project with a multi-part object on the bed" -msgstr "您不能加载一个在床上有多个部件的SLA项目" +msgstr "热床上有多零件对象时，无法加载 SLA 项目" msgid "Please check your object list before preset changing." msgstr "请在预设更改之前检查对象列表。" @@ -4361,11 +4511,13 @@ msgstr "版权" msgid "License" msgstr "许可证" +# AI Translated msgid "Orca Slicer is licensed under " -msgstr "Orca Slicer（逆戟鲸切片器）是在" +msgstr "Orca Slicer 的授权许可证为 " +# AI Translated msgid "GNU Affero General Public License, version 3" -msgstr "第3版 GNU Affero 通用公共许可证下授权的" +msgstr "GNU Affero 通用公共许可证第 3 版" msgid "Orca Slicer is based on PrusaSlicer and BambuStudio" msgstr "Orca Slicer 基于 PrusaSlicer 以及 BambuStudio 开发" @@ -4434,10 +4586,13 @@ msgstr "AMS 材料设置" msgid "Close" msgstr "关闭" +# AI Translated msgid "" "Nozzle\n" "Temperature" -msgstr "挤出头温度" +msgstr "" +"喷嘴\n" +"温度" msgid "max" msgstr "最大" @@ -4445,9 +4600,10 @@ msgstr "最大" msgid "min" msgstr "最小" +# AI Translated #, boost-format msgid "The input value should be greater than %1% and less than %2%" -msgstr "输入的范围应当在 %1% 和 %2% 之间" +msgstr "输入值应大于 %1% 且小于 %2%" msgid "Factors of Flow Dynamics Calibration" msgstr "动态流量校准系数" @@ -4489,10 +4645,13 @@ msgstr "收藏的耗材丝" msgid "All filaments" msgstr "所有耗材丝" +# AI Translated msgid "" "The nozzle flow is not set. Please set the nozzle flow rate before editing the filament.\n" "'Device -> Print parts'" -msgstr "喷嘴流量未设置，请在编辑耗材设置前设置喷嘴流量。“设备 -> 打印件”" +msgstr "" +"喷嘴流量未设置，请在编辑耗材丝设置前设置喷嘴流量。\n" +"“设备 -> 打印机零件”" msgid "AMS" msgstr "AMS" @@ -4570,43 +4729,48 @@ msgstr "步骤" msgid "Unmapped" msgstr "未映射" +# AI Translated msgid "" "Upper half area: Original\n" "Lower half area: The filament from original project will be used when unmapped.\n" "And you can click it to modify" msgstr "" "上半部分区域：原始\n" -"下半部分区域：未映射时将使用原始项目中的耗材。\n" +"下半部分区域：未映射时将使用原始项目中的耗材丝。\n" "并且可以点击修改" +# AI Translated msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you can click it to modify" msgstr "" "上半部分区域：原始\n" -"下半部分区域：AMS 中的耗材\n" +"下半部分区域：AMS 中的耗材丝\n" "并且可以点击修改" +# AI Translated msgid "" "Upper half area: Original\n" "Lower half area: Filament in AMS\n" "And you cannot click it to modify" msgstr "" "上半部分区域：原始\n" -"下半部分区域：AMS 中的耗材\n" +"下半部分区域：AMS 中的耗材丝\n" "并且不能点击修改" +# AI Translated msgid "AMS Slots" -msgstr "AMS舱内材料" +msgstr "AMS 槽位" +# AI Translated msgid "Please select from the following filaments" -msgstr "请从以下耗材中选择" +msgstr "请从以下耗材丝中选择" # AI Translated #, c-format, boost-format msgid "Select filament that installed to the %s" -msgstr "选择已安装到 %s 的耗材" +msgstr "选择已安装到 %s 的耗材丝" msgid "Left AMS" msgstr "左侧AMS" @@ -4614,8 +4778,9 @@ msgstr "左侧AMS" msgid "External" msgstr "外部" +# AI Translated msgid "Reset current filament mapping" -msgstr "重置当前耗材映射" +msgstr "重置当前耗材丝映射" msgid "Right AMS" msgstr "右侧AMS" @@ -4627,12 +4792,12 @@ msgstr "使用当前喷嘴打印可能会产生额外 %0.2f 克废料。" # AI Translated #, c-format, boost-format msgid "Tips: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." -msgstr "提示：耗材类型(%s)与切片文件中的耗材类型(%s)不匹配。如果您想使用此槽位，可以安装 %s 代替 %s，并在“设备”页面上更改槽位信息。" +msgstr "提示：耗材丝类型(%s)与切片文件中的耗材丝类型(%s)不匹配。如果您想使用此槽位，可以安装 %s 代替 %s，并在“设备”页面上更改槽位信息。" # AI Translated #, c-format, boost-format msgid "Cannot select: the filament type(%s) does not match with the filament type(%s) in the slicing file. If you want to use this slot, you can install %s instead of %s and change slot information on the 'Device' page." -msgstr "无法选择：耗材类型(%s)与切片文件中的耗材类型(%s)不匹配。如果您想使用此槽位，可以安装 %s 代替 %s，并在“设备”页面上更改槽位信息。" +msgstr "无法选择：耗材丝类型(%s)与切片文件中的耗材丝类型(%s)不匹配。如果您想使用此槽位，可以安装 %s 代替 %s，并在“设备”页面上更改槽位信息。" # AI Translated #, c-format, boost-format @@ -4641,7 +4806,7 @@ msgstr "无法选择：该槽位为空或未定义。如果您想使用此槽位 # AI Translated msgid "Cannot select: No filament loaded in current slot." -msgstr "无法选择：当前槽位未装载耗材。" +msgstr "无法选择：当前槽位未装载耗材丝。" msgid "Enable AMS" msgstr "启用AMS" @@ -4652,11 +4817,13 @@ msgstr "采用AMS里的材料打印" msgid "Disable AMS" msgstr "不启用AMS" +# AI Translated msgid "Print with filament on external spool" -msgstr "使用机箱背后挂载的材料打印" +msgstr "使用外置料盘上的耗材丝打印" +# AI Translated msgid "Please change the desiccant when it is too wet. The indicator may not represent accurately in following cases: when the lid is open or the desiccant pack is changed. It takes a few hours to absorb the moisture, and low temperatures also slow down the process." -msgstr "当干燥剂过于潮湿时,请及时更换。以下几种情况下,指示器可能无法准确反映情况:盖子打开或干燥剂包被替换时。干燥剂需要数小时吸收潮气,低温也会延缓该过程。" +msgstr "当干燥剂过于潮湿时，请及时更换。以下几种情况下，指示器可能无法准确反映情况：盖子打开或干燥剂包被替换时。干燥剂需要数小时吸收潮气，低温也会延缓该过程。" msgid "Configure which AMS slot should be used for a filament used in the print job." msgstr "配置当前打印任务应使用哪个AMS槽位" @@ -4673,8 +4840,9 @@ msgstr "点击以手动选择AMS槽位" msgid "Do not Enable AMS" msgstr "不启用AMS" +# AI Translated msgid "Print using filament on external spool." -msgstr "使用安装在机箱背面的材料进行打印" +msgstr "使用外置料盘上的耗材丝进行打印。" msgid "Print with filament in AMS" msgstr "采用AMS里的材料打印" @@ -4692,25 +4860,31 @@ msgstr "右" msgid "When the current material run out, the printer will continue to print in the following order." msgstr "当前材料耗尽时，打印机将按照以下顺序继续打印。" +# AI Translated msgid "Identical filament: same brand, type and color." -msgstr "相同耗材：同品牌、同型号、同色。" +msgstr "相同耗材丝：同品牌、同类型、同颜色。" msgid "Group" msgstr "组" +# AI Translated msgid "When the current material runs out, the printer would use identical filament to continue printing." -msgstr "若当前耗材用尽，打印机将选用相同耗材继续打印。" +msgstr "若当前耗材丝用尽，打印机将选用相同耗材丝继续打印。" msgid "The printer does not currently support auto refill." msgstr "打印机当前不支持自动补给耗材。" +# AI Translated msgid "AMS filament backup is not enabled; please enable it in the AMS settings." -msgstr "AMS耗材备份未启用，请在AMS设置中启用。" +msgstr "AMS耗材丝备份未启用，请在AMS设置中启用。" +# AI Translated msgid "" "When the current filament runs out, the printer will use identical filament to continue printing.\n" "*Identical filament: same brand, type and color." -msgstr "当前材料耗尽时，打印机将按照以下顺序继续打印。相同耗材：同品牌、同型号、同色。" +msgstr "" +"当前耗材丝耗尽时，打印机将使用相同的耗材丝继续打印。\n" +"*相同耗材丝：同品牌、同类型、同颜色。" msgid "DRY" msgstr "干燥" @@ -4736,8 +4910,9 @@ msgstr "在插入一卷新料时，AMS将不会自动读取料卷信息，预留 msgid "Update on startup" msgstr "开机时检测" +# AI Translated msgid "The AMS will automatically read the information of inserted filament on start-up. It will take about 1 minute. The reading process will rotate the filament spools." -msgstr "每次开机时，AMS将会自动读取其所插入的耗材信息(读取过程会转料卷)。需要花时大约1分钟。" +msgstr "每次开机时，AMS 将自动读取已插入耗材丝的信息，耗时约 1 分钟。读取过程中料卷会转动。" msgid "The AMS will not automatically read information from inserted filament during startup and will continue to use the information recorded before the last shutdown." msgstr "AMS不会在启动时自动读取耗材丝信息。它会使用上次关机前记录的信息。" @@ -4751,20 +4926,24 @@ msgstr "AMS 将尝试估计 Bambu Lab 耗材丝的剩余容量。" msgid "AMS filament backup" msgstr "AMS材料备份" +# AI Translated msgid "AMS will continue to another spool with matching filament properties automatically when current filament runs out." -msgstr "AMS料材丝耗尽后将自动切换到属性完全相同的耗材丝" +msgstr "当前耗材丝耗尽时，AMS 将自动切换到属性相同的另一卷耗材丝。" msgid "Air Printing Detection" msgstr "空打检测" +# AI Translated msgid "Detects clogging and filament grinding, halting printing immediately to conserve time and filament." -msgstr "检测到堵塞和耗材丝碾磨，立即停止打印以节约时间和耗材丝" +msgstr "检测堵塞和耗材丝研磨，并立即停止打印，以节省时间和耗材丝。" +# AI Translated msgid "AMS Type" -msgstr "AMS 型" +msgstr "AMS 类型" +# AI Translated msgid "Switching" -msgstr "交换" +msgstr "切换中" msgid "The printer is busy and cannot switch AMS type." msgstr "打印机正忙，无法切换 AMS 类型。" @@ -4772,11 +4951,13 @@ msgstr "打印机正忙，无法切换 AMS 类型。" msgid "Please unload all filament before switching." msgstr "切换前请退下所有耗材丝。" +# AI Translated msgid "AMS type switching needs firmware update, taking about 30s. Switch now?" -msgstr "AMS 类型切换需要固件更新，大约需要 30s。现在切换？" +msgstr "切换 AMS 类型需要更新固件，耗时约 30 秒。是否立即切换？" +# AI Translated msgid "Arrange AMS Order" -msgstr "安排 AMS 订单" +msgstr "调整 AMS 顺序" msgid "AMS ID will be reset. If you want a specific ID sequence, disconnect all AMS before resetting and connect them in the desired order after resetting." msgstr "AMS ID 将被重置。如果您需要特定的 ID 序列，请在重置前断开所有 AMS，并在重置后按所需顺序连接它们。" @@ -4787,8 +4968,9 @@ msgstr "文件" msgid "Calibration" msgstr "校准" +# AI Translated msgid "Failed to download the plug-in. Please check your firewall settings and VPN software and retry." -msgstr "插件下载失败。请检查您的防火墙设置和vpn软件,检查后重试。" +msgstr "插件下载失败。请检查您的防火墙设置和 VPN 软件，然后重试。" msgid "Failed to install the plug-in. The plug-in file may be in use. Please restart OrcaSlicer and try again. Also check whether it is blocked or has been deleted by anti-virus software." msgstr "插件安装失败。插件文件可能正在使用中。请重新启动 OrcaSlicer 后重试。同时检查是否被杀毒软件阻止或删除。" @@ -4903,6 +5085,7 @@ msgstr "G-code 文件导出到 %1%" msgid "Unknown error with G-code export" msgstr "导出G-code文件发生未知错误。" +# AI Translated #, boost-format msgid "" "Failed to save G-code file.\n" @@ -4911,15 +5094,16 @@ msgid "" msgstr "" "无法保存G-code文件。\n" "错误信息：%1%。\n" -"源文件 %2%." +"源文件：%2%。" # AI Translated msgid "Copying of the temporary G-code to the output G-code failed." msgstr "将临时 G-code 复制到输出 G-code 失败" +# AI Translated #, boost-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" -msgstr "计划上传到 `%1%`。请参阅窗口-> 打印主机上传队列" +msgstr "计划上传到 `%1%`。请参阅“窗口 -> 打印主机上传队列”" msgid "Origin" msgstr "原点" @@ -4936,8 +5120,9 @@ msgstr "热床直径。假定原点 (0,0) 位于中心。" msgid "Rectangular" msgstr "矩形" +# AI Translated msgid "Circular" -msgstr "圆" +msgstr "圆形" msgid "Load shape from STL..." msgstr "从STL文件加载形状..." @@ -4960,8 +5145,9 @@ msgstr "选择热床形状的 STL 文件：" msgid "Invalid file format." msgstr "无效的文件格式。" +# AI Translated msgid "Error: invalid model" -msgstr "错误！无效模型" +msgstr "错误：无效模型" msgid "The selected file contains no geometry." msgstr "所选文件不包含任何几何数据。" @@ -4972,8 +5158,9 @@ msgstr "所选文件包含多个未连接的区域。不支持这种类型。" msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "选择 (PNG/SVG) 文件作为热床纹理：" +# AI Translated msgid "Choose an STL file to import bed model from:" -msgstr "选择 STL 文件来导入床模型:" +msgstr "选择要导入热床模型的 STL 文件：" msgid "Bed Shape" msgstr "热床形状" @@ -4992,18 +5179,20 @@ msgstr "推荐最低温度不能大于推荐最高温度。\n" msgid "Please check.\n" msgstr "请检查。\n" +# AI Translated msgid "" "The nozzle may become clogged when the temperature is out of the recommended range.\n" "Please make sure whether to use this temperature to print.\n" "\n" msgstr "" -"当温度超过建议的范围时，喷嘴可能会堵塞。\n" -"请确认是否使用该温度打印\n" +"当温度超出建议范围时，喷嘴可能会堵塞。\n" +"请确认是否使用该温度打印。\n" "\n" +# AI Translated #, c-format, boost-format msgid "The recommended nozzle temperature for this filament type is [%d, %d] degrees Celsius." -msgstr "该耗材的推荐喷嘴温度是[%d, %d]摄氏度" +msgstr "该耗材丝的推荐喷嘴温度是[%d, %d]摄氏度。" msgid "Adaptive Pressure Advance model validation failed:\n" msgstr "自适应 Pressure Advance 模型验证失败：\n" @@ -5023,14 +5212,15 @@ msgstr "" "熨烫线距过小\n" "已重置为 0.1" +# AI Translated #, c-format, boost-format msgid "Current chamber temperature is higher than the material's safe temperature; this may result in material softening and nozzle clogs. The maximum safe temperature for the material is %d" -msgstr "当前腔体温度高于材料的安全温度，这可能导致材料软化和堵塞。该材料的最高安全温度为 %d。" +msgstr "当前腔体温度高于材料的安全温度，这可能导致材料软化和喷嘴堵塞。该材料的最高安全温度为 %d。" # AI Translated #, c-format, boost-format msgid "The minimal chamber temperature (%d℃) is higher than the target chamber temperature (%d℃). The minimal value is the threshold at which printing starts while the chamber keeps heating toward the target, so it should not exceed it. It will be clamped to the target." -msgstr "最低机箱温度(%d℃)高于目标机箱温度(%d℃)。最低值是开始打印的阈值，此时机箱会持续朝目标温度加热，因此它不应超过目标值。该值将被限制到目标值。" +msgstr "最低腔体温度(%d℃)高于目标腔体温度(%d℃)。最低值是开始打印的阈值，此时腔体会持续朝目标温度加热，因此它不应超过目标值。该值将被限制到目标值。" # AI Translated #, c-format, boost-format @@ -5099,8 +5289,9 @@ msgstr "" "\n" "这个数值将被重置为0。" +# AI Translated msgid "Alternate extra wall doesn't work well when ensure vertical shell thickness is set to All." -msgstr "“交替添加额外”与“确保垂直外壳厚度”的”全部“选项不兼容。" +msgstr "当“确保垂直外壳厚度”设为“所有”时，“交替添加额外内墙”效果不佳。" msgid "" "Change these settings automatically?\n" @@ -5111,16 +5302,17 @@ msgstr "" "是 - 自动调整确保垂直外壳厚度为“适量”，并开启交替添加额外内墙\n" "否 - 不使用交替添加额外内墙" +# AI Translated msgid "" "Prime tower does not work when Adaptive Layer Height or Independent Support Layer Height is on.\n" "Which do you want to keep?\n" "YES - Keep Prime Tower\n" "NO - Keep Adaptive Layer Height and Independent Support Layer Height" msgstr "" -"擦拭塔不支持和自适应层高或支撑独立层高。同时开启\n" +"擦拭塔不支持与自适应层高或支撑独立层高同时开启。\n" "如何选择？\n" -"是 - 选择开启擦拭塔\n" -"否 - 选择保留自适应层高或支撑独立层高" +"是 - 保留擦拭塔\n" +"否 - 保留自适应层高和支撑独立层高" msgid "" "Prime tower does not work when Adaptive Layer Height is on.\n" @@ -5151,16 +5343,18 @@ msgstr "" "seam_slope_start_height需要小于layer_height。\n" "重置为0。" +# AI Translated #, no-c-format, no-boost-format msgid "" "Lock depth should be smaller than skin depth.\n" "Reset to 50% of skin depth." msgstr "" -"锁定深度应小于表皮深度。\n" -"重置为表皮深度的50%。" +"填充锁定深度应小于表皮填充深度。\n" +"已重置为表皮填充深度的50%。" +# AI Translated msgid "Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall Generator to be enabled." -msgstr "绒毛表面的[挤出]和[组合]模式都需要启用Arachne墙生成器。" +msgstr "绒毛表面的[挤出]和[合并]模式都需要启用Arachne墙生成器。" msgid "" "Change these settings automatically?\n" @@ -5173,25 +5367,28 @@ msgstr "" # AI Translated msgid "Brim ear radius" -msgstr "圆盘半径" +msgstr "耳状 Brim半径" msgid "Brim width" msgstr "Brim宽度" +# AI Translated msgid "Spiral mode only works when wall loops is 1, support is disabled, clumping detection by probing is disabled, top shell layers is 0, sparse infill density is 0 and timelapse type is traditional." -msgstr "螺旋模式仅在壁环为 1、支撑被禁用、探测结块检测被禁用、顶部壳层为 0、稀疏填充密度为 0 且延时类型为传统时才起作用。" +msgstr "旋转花瓶模式仅在墙层数为 1、支撑已禁用、结块检测已禁用、顶部外壳层数为 0、稀疏填充密度为 0 且延时摄影为传统模式时才起作用。" +# AI Translated msgid " But machines with I3 structure will not generate timelapse videos." -msgstr "但是使用I3结构的机器将不会生成延时视频。" +msgstr " 但 I3 结构的机器不会生成延时摄影视频。" +# AI Translated msgid "" "Change these settings automatically?\n" "Yes - Change these settings and enable spiral/vase mode automatically\n" "No - Cancel enabling spiral mode" msgstr "" "自动调整这些设置？\n" -"是 - 自动调整这些设置并开启旋转模式\n" -"否 - 暂不使用旋转模式" +"是 - 自动调整这些设置并开启旋转花瓶模式\n" +"否 - 取消开启旋转花瓶模式" msgid "N/A" msgstr "不适用" @@ -5232,8 +5429,10 @@ msgstr "扫描首层" msgid "Identifying build plate type" msgstr "识别打印板类型" +# AI Translated +# Needs human review: BambuStudio uses 激光雷达; confirm keeping Micro Lidar in English msgid "Calibrating Micro Lidar" -msgstr "校准轮廓仪外参" +msgstr "校准 Micro Lidar" msgid "Homing toolhead" msgstr "工具头回到起始点" @@ -5250,11 +5449,14 @@ msgstr "已被用户暂停" msgid "Pause (front cover fall off)" msgstr "暂停（前盖脱落）" +# AI Translated +# Needs human review: BambuStudio uses 激光雷达; confirm keeping Micro Lidar in English msgid "Calibrating the micro lidar" -msgstr "轮廓仪激光校准" +msgstr "校准 Micro Lidar" +# AI Translated msgid "Calibrating flow ratio" -msgstr "校准流量比" +msgstr "校准流量比例" msgid "Pause (nozzle temperature malfunction)" msgstr "暂停（喷嘴温度故障）" @@ -5280,11 +5482,13 @@ msgstr "暂停（AMS 离线）" msgid "Pause (low speed of the heatbreak fan)" msgstr "暂停（散热风扇低速）" +# AI Translated msgid "Pause (chamber temperature control problem)" -msgstr "暂停（腔室温度控制问题）" +msgstr "暂停（腔体温度控制问题）" +# AI Translated msgid "Cooling chamber" -msgstr "冷却仓温" +msgstr "腔体降温中" msgid "Pause (G-code inserted by user)" msgstr "暂停（用户插入的 G-code）" @@ -5292,14 +5496,16 @@ msgstr "暂停（用户插入的 G-code）" msgid "Motor noise showoff" msgstr "电机噪音校准结果展示" +# AI Translated msgid "Pause (nozzle clumping)" -msgstr "暂停（喷嘴结块）" +msgstr "暂停（裹头）" msgid "Pause (cutter error)" msgstr "暂停（切刀错误）" +# AI Translated msgid "Pause (first layer error)" -msgstr "暂停（第一层错误）" +msgstr "暂停（首层错误）" msgid "Pause (nozzle clog)" msgstr "暂停（喷嘴堵塞）" @@ -5316,8 +5522,9 @@ msgstr "测量运动精度" msgid "Nozzle offset calibration" msgstr "喷嘴偏移校准" +# AI Translated msgid "High temperature auto bed leveling" -msgstr "高温自动床身调平" +msgstr "高温自动热床调平" msgid "Auto Check: Quick Release Lever" msgstr "自动检查：快速释放杆" @@ -5331,20 +5538,25 @@ msgstr "激光校准" msgid "Auto Check: Platform" msgstr "自动检查：平台" +# AI Translated msgid "Confirming BirdsEye Camera location" -msgstr "确认 BirdsEye 相机位置" +msgstr "确认俯视摄像头位置" +# AI Translated msgid "Calibrating BirdsEye Camera" -msgstr "校准鸟眼相机" +msgstr "校准俯视摄像头" +# AI Translated msgid "Auto bed leveling -phase 1" -msgstr "自动床调平 - 第 1 阶段" +msgstr "自动热床调平 - 第 1 阶段" +# AI Translated msgid "Auto bed leveling -phase 2" -msgstr "自动床调平 - 第 2 阶段" +msgstr "自动热床调平 - 第 2 阶段" +# AI Translated msgid "Heating chamber" -msgstr "加热室" +msgstr "腔体加热中" msgid "Cooling heatbed" msgstr "冷却热床" @@ -5355,8 +5567,9 @@ msgstr "打印校准线" msgid "Auto Check: Material" msgstr "自动检查：材料" +# AI Translated msgid "Live View Camera Calibration" -msgstr "实时取景相机校准" +msgstr "实况摄像头校准" msgid "Waiting for heatbed to reach target temperature" msgstr "等待热床达到目标温度" @@ -5367,11 +5580,14 @@ msgstr "自动检查：材料位置" msgid "Cutting Module Offset Calibration" msgstr "切割模块偏移校准" +# AI Translated +# Needs human review: BambuStudio has 曲面测量中; check what the printer measures msgid "Measuring Surface" -msgstr "测量面" +msgstr "测量表面" +# AI Translated msgid "Calibrating the detection position of nozzle clumping" -msgstr "校准喷嘴结块检测位置" +msgstr "校准裹头检测位置" msgid "Update successful." msgstr "更新成功。" @@ -5391,31 +5607,37 @@ msgstr "该打印机不支持延时摄影。" msgid "Timelapse is not supported while the storage does not exist." msgstr "当存储不存在时，不支持延时摄影。" +# AI Translated msgid "Timelapse is not supported while the storage is unavailable." -msgstr "当存储不可用时，不支持延时拍摄。" +msgstr "当存储不可用时，不支持延时摄影。" +# AI Translated msgid "Timelapse is not supported while the storage is readonly." -msgstr "当存储为只读时，不支持延时拍摄。" +msgstr "当存储为只读时，不支持延时摄影。" msgid "To ensure your safety, certain processing tasks (such as laser) can only be resumed on printer." msgstr "为了确保您的安全，某些处理任务（例如激光）只能在打印机上恢复。" +# AI Translated #, c-format, boost-format msgid "The chamber temperature is too high, which may cause the filament to soften. Please wait until the chamber temperature drops below %d℃. You may open the front door or enable fans to cool down." -msgstr "腔室温度过高，可能会导致耗材丝软化。请等待箱内温度降至%d℃以下。您可以打开前门或让风扇冷却。" +msgstr "腔体温度过高，可能会导致耗材丝软化。请等待腔体温度降至%d℃以下。您可以打开前门或开启风扇降温。" #, c-format, boost-format msgid "AMS temperature is too high, which may cause the filament to soften. Please wait until the AMS temperature drops below %d℃." msgstr "AMS 温度过高，可能会导致耗材丝软化。请等待 AMS 温度降至 %d℃ 以下。" +# AI Translated msgid "The current chamber temperature or the target chamber temperature exceeds 45℃. In order to avoid extruder clogging, low temperature filament(PLA/PETG/TPU) is not allowed to be loaded." -msgstr "当前室温度或目标室温度超过 45℃。为避免挤出机堵塞，不允许装入低温丝（PLA/PETG/TPU）。" +msgstr "当前腔体温度或目标腔体温度超过 45℃。为避免挤出机堵塞，不允许装入低温耗材丝（PLA/PETG/TPU）。" +# AI Translated msgid "Low temperature filament(PLA/PETG/TPU) is loaded in the extruder. In order to avoid extruder clogging, it is not allowed to set the chamber temperature." -msgstr "将低温丝（PLA/PETG/TPU）装入挤出机中。为了避免挤出机堵塞，不允许设定腔室温度。" +msgstr "挤出机中已装入低温耗材丝（PLA/PETG/TPU）。为了避免挤出机堵塞，不允许设定腔体温度。" +# AI Translated msgid "When you set the chamber temperature below 40℃, the chamber temperature control will not be activated, and the target chamber temperature will automatically be set to 0℃." -msgstr "当您将仓温设置在40℃以下时，仓温控制将不会激活。目标仓温将自动设置为0℃。" +msgstr "当您将腔体温度设置在40℃以下时，腔体温度控制将不会激活，目标腔体温度将自动设置为0℃。" msgid "Failed to start print job" msgstr "发起打印任务失败" @@ -5451,11 +5673,13 @@ msgstr "网络不可用" msgid "Resume Printing" msgstr "继续打印" +# AI Translated msgid "Resume (defects acceptable)" -msgstr "恢复（可接受缺陷）" +msgstr "继续（可接受缺陷）" +# AI Translated msgid "Resume (problem solved)" -msgstr "恢复（问题已解决）" +msgstr "继续（问题已解决）" msgid "Stop Printing" msgstr "停止打印" @@ -5463,8 +5687,9 @@ msgstr "停止打印" msgid "Check Assistant" msgstr "前往机器助手" +# AI Translated msgid "Filament Extruded, Continue" -msgstr "耗材已挤出，继续" +msgstr "耗材丝已挤出，继续" msgid "Not Extruded Yet, Retry" msgstr "耗材未挤出，重试" @@ -5472,8 +5697,9 @@ msgstr "耗材未挤出，重试" msgid "Finished, Continue" msgstr "已完成，继续" +# AI Translated msgid "Filament Loaded, Resume" -msgstr "耗材已加载，继续" +msgstr "耗材丝已加载，继续" msgid "View Liveview" msgstr "查看LiveView" @@ -5488,11 +5714,13 @@ msgstr "重新检查" msgid "Ignore. Don't Remind Next Time" msgstr "忽略。下次不再提醒" +# AI Translated msgid "Ignore this and Resume" -msgstr "忽略此并继续" +msgstr "忽略此问题，继续" +# AI Translated msgid "Problem Solved and Resume" -msgstr "问题解决并继续" +msgstr "问题已解决，继续" msgid "Got it, Turn off the Fire Alarm." msgstr "明白了，关掉火警警报器。" @@ -5500,8 +5728,9 @@ msgstr "明白了，关掉火警警报器。" msgid "Retry (problem solved)" msgstr "重试（问题已解决）" +# AI Translated msgid "Stop Drying" -msgstr "停止干燥" +msgstr "停止烘干" msgid "Proceed" msgstr "继续" @@ -5619,9 +5848,10 @@ msgstr "值 %s 越界，是否继续？" msgid "Parameter validation" msgstr "参数验证" +# AI Translated #, c-format, boost-format msgid "Value %s is out of range. The valid range is from %d to %d." -msgstr "值 %s 超出了范围，有效的范围是从 %d 到 %d 。" +msgstr "值 %s 超出范围，有效范围为 %d 到 %d。" #, c-format, boost-format msgid "Is it %s%% or %s %s?" @@ -5634,11 +5864,13 @@ msgstr "%" msgid "Invalid input format. Expected vector of dimensions in the following format: \"%1%\"" msgstr "输入格式无效。应为以下格式的维度向量：“%1%”" +# AI Translated msgid "Input value is out of range" -msgstr "输入值超出范围外" +msgstr "输入值超出范围" +# AI Translated msgid "Some extension in the input is invalid" -msgstr "输入中的某些扩展无效" +msgstr "输入中的某些扩展名无效" msgid "This parameter expects a valid template." msgstr "此参数需要有效的模板" @@ -5684,8 +5916,9 @@ msgstr "配置 (%d)" msgid "Pick" msgstr "选择" +# AI Translated msgid "Summary" -msgstr "概括" +msgstr "概览" msgid "Layer Height" msgstr "层高" @@ -5724,8 +5957,9 @@ msgstr "层时间（对数）" msgid "Pressure Advance" msgstr "Pressure Advance" +# AI Translated msgid "Noop" -msgstr "努普" +msgstr "空操作" msgid "Retract" msgstr "回抽" @@ -5739,8 +5973,9 @@ msgstr "接缝" msgid "Tool Change" msgstr "换料" +# AI Translated msgid "Color Change" -msgstr "颜色变化" +msgstr "颜色更换" msgid "Pause Print" msgstr "暂停打印" @@ -5751,8 +5986,9 @@ msgstr "空驶" msgid "Wipe" msgstr "擦拭" +# AI Translated msgid "Extrude" -msgstr "拉伸" +msgstr "挤出" msgid "Inner wall" msgstr "内墙" @@ -5775,8 +6011,9 @@ msgstr "顶面" msgid "Bridge" msgstr "桥接" +# AI Translated msgid "Gap infill" -msgstr "填缝" +msgstr "缝隙填充" msgid "Skirt" msgstr "裙边" @@ -5790,8 +6027,9 @@ msgstr "擦拭塔" msgid "Bottom surface" msgstr "底面" +# AI Translated msgid "Internal bridge" -msgstr "内桥" +msgstr "内部桥接" msgid "Support transition" msgstr "支撑转换层" @@ -5799,47 +6037,60 @@ msgstr "支撑转换层" msgid "Mixed" msgstr "混合" +# AI Translated msgid "Height: " -msgstr "层高: " +msgstr "层高： " +# AI Translated msgid "Width: " -msgstr "线宽: " +msgstr "线宽： " +# AI Translated msgid "Flow: " -msgstr "挤出流量: " +msgstr "挤出流量： " +# AI Translated msgid "Fan: " -msgstr "风扇速度: " +msgstr "风扇速度： " +# AI Translated msgid "Temperature: " -msgstr "温度: " +msgstr "温度： " +# AI Translated msgid "Layer Time: " -msgstr "层时间: " +msgstr "层时间： " +# AI Translated msgid "Tool: " -msgstr "工具：" +msgstr "工具头： " +# AI Translated msgid "Color: " -msgstr "颜色：" +msgstr "颜色： " +# AI Translated msgid "Acceleration: " -msgstr "加速度：" +msgstr "加速度： " +# AI Translated msgid "Jerk: " -msgstr "抖动：" +msgstr "抖动： " +# AI Translated msgid "PA: " -msgstr "PA：" +msgstr "PA： " +# AI Translated msgid "mm/s" -msgstr "毫米/秒" +msgstr "mm/s" msgid "mm/s²" msgstr "mm/s²" +# AI Translated msgid "mm³/s" -msgstr "毫米立方/秒" +msgstr "mm³/s" msgid "Flow rate" msgstr "流量" @@ -5850,8 +6101,9 @@ msgstr "风扇速度" msgid "Time" msgstr "时间" +# AI Translated msgid "Speed: " -msgstr "速度: " +msgstr "速度： " msgid "Actual speed profile" msgstr "实际速度曲线" @@ -5873,8 +6125,9 @@ msgstr "显示" msgid "Flushed" msgstr "冲刷" +# AI Translated msgid "Tower" -msgstr "擦料塔" +msgstr "擦拭塔" msgid "Total" msgstr "总计" @@ -5894,8 +6147,9 @@ msgstr "根据最佳耗材丝分组自动重新切片，切片后显示分组结 msgid "Filament Grouping" msgstr "耗材丝分组" +# AI Translated msgid "Please place filaments on the printer based on grouping result." -msgstr "请根据分组结果将耗材放置在打印机上。" +msgstr "请根据分组结果将耗材丝放置在打印机上。" msgid "Tips:" msgstr "提示：" @@ -5942,8 +6196,9 @@ msgstr[0] "与具有一个喷嘴的打印机相比，增加 %1%g 耗材丝，节 msgid "Set to Optimal" msgstr "设置为最佳" +# AI Translated msgid "Regroup filament" -msgstr "重新组合耗材丝" +msgstr "重新分组耗材丝" # AI Translated #, boost-format @@ -5960,8 +6215,9 @@ msgstr "高于 %1% mm" msgid "from %1% to %2% mm" msgstr "从 %1% mm 到 %2% mm" +# AI Translated msgid "Usage" -msgstr "用法" +msgstr "用量" msgid "Layer height (mm)" msgstr "层高（mm）" @@ -5987,17 +6243,20 @@ msgstr "风扇速度（%）" msgid "Temperature (℃)" msgstr "温度（℃）" +# AI Translated msgid "Volumetric flow rate (mm³/s)" -msgstr "体积流量速度（mm³/s）" +msgstr "体积流量（mm³/s）" msgid "Actual volumetric flow rate (mm³/s)" msgstr "实际体积流量（mm³/s）" +# AI Translated msgid "Seams" -msgstr "缝" +msgstr "接缝" +# AI Translated msgid "Filament changes" -msgstr "材料切换" +msgstr "耗材丝更换" msgid "Options" msgstr "选项" @@ -6008,8 +6267,9 @@ msgstr "成本" msgid "Filament change times" msgstr "换料次数" +# AI Translated msgid "Tool changes" -msgstr "工具更换" +msgstr "工具头更换" msgid "Color change" msgstr "颜色更换" @@ -6021,8 +6281,9 @@ msgstr "打印" msgid "Time Estimation" msgstr "时间预估" +# AI Translated msgid "Normal mode" -msgstr "普通模式" +msgstr "正常模式" msgid "Total Filament" msgstr "总耗材丝" @@ -6036,25 +6297,29 @@ msgstr "准备时间" msgid "Model printing time" msgstr "模型打印时间" +# AI Translated +# Needs human review: Confirm 静音模式 matches the printer-settings label for silent mode. msgid "Show stealth mode" -msgstr "显示隐身模式" +msgstr "显示静音模式" msgid "Show normal mode" msgstr "显示正常模式" +# AI Translated msgid "" "An object is placed in the left/right nozzle-only area or exceeds the printable height of the left nozzle.\n" "Please ensure the filaments used by this object are not arranged to other nozzles." msgstr "" -"物体被放置在左/右喷嘴专用区域内或超出左喷嘴的可打印高度。\n" -"请确保该物体使用的耗材丝没有排列到其他喷嘴上。" +"对象被放置在左/右喷嘴专用区域内或超出左喷嘴的可打印高度。\n" +"请确保该对象使用的耗材丝没有排列到其他喷嘴上。" +# AI Translated msgid "" "An object is laid over the boundary of plate or exceeds the height limit.\n" "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume." msgstr "" -"有对象被放置在打印板的边界上或超过高度限制。\n" -"请通过将其完全移动到打印板内或打印板外，并确认高度在构建空间以内来解决问题。" +"有对象跨越了盘的边界或超出高度限制。\n" +"请将其完全移入或移出盘，并确认高度在构建体积以内。" msgid "Variable layer height" msgstr "可变层高" @@ -6152,11 +6417,13 @@ msgstr "1~16 数字键" msgid "Number keys can quickly change the color of objects" msgstr "数字键可以快速更改对象颜色" +# AI Translated msgid "Following objects are laid over the boundary of plate or exceeds the height limit:\n" -msgstr "下列物体超出板的边界或超过高度限制：\n" +msgstr "下列对象超出盘的边界或超过高度限制：\n" +# AI Translated msgid "Please solve the problem by moving it totally on or off the plate, and confirming that the height is within the build volume.\n" -msgstr "请通过将其完全移至板上或移离板来解决问题，并确认高度在构建体积内。\n" +msgstr "请将其完全移入或移出盘，并确认高度在构建体积内。\n" #, c-format, boost-format msgid "The position or size of some models exceeds the %s's printable range." @@ -6166,8 +6433,9 @@ msgstr "某些模型的位置或尺寸超出了%s 的可打印范围。" msgid "The position or size of the model %s exceeds the %s's printable range." msgstr "模型 %s 的位置或尺寸超出了 %s 的可打印范围。" +# AI Translated msgid " Please check and adjust the part's position or size to fit the printable range:\n" -msgstr "请检查并调整零件的位置或尺寸以适合可打印范围：\n" +msgstr " 请检查并调整零件的位置或尺寸以适合可打印范围：\n" #, boost-format msgid "Left nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%\n" @@ -6177,8 +6445,9 @@ msgstr "左喷嘴：X：%1%-%2%，Y：%3%-%4%，Z：%5%-%6%\n" msgid "Right nozzle: X:%1%-%2%, Y:%3%-%4%, Z:%5%-%6%" msgstr "右喷嘴：X：%1%-%2%，Y：%3%-%4%，Z：%5%-%6%" +# AI Translated msgid "Tool move" -msgstr "工具 移动" +msgstr "工具移动" # AI Translated msgid "Tool Rotate" @@ -6193,8 +6462,9 @@ msgstr "自动朝向选项" msgid "Enable rotation" msgstr "开启旋转" +# AI Translated msgid "Optimize support interface area" -msgstr "优化接触面面积" +msgstr "优化支撑面面积" # src/slic3r/GUI/GLCanvas3D.cpp:4767 msgid "Orient" @@ -6272,17 +6542,21 @@ msgstr "拆分为对象" msgid "Add" msgstr "添加" +# AI Translated msgid "Auto orient all/selected objects" -msgstr "自动定位所有/选定的对象" +msgstr "自动调整所有/所选对象的朝向" +# AI Translated msgid "Auto orient all objects on current plate" -msgstr "自动调整当前盘上的所有对象" +msgstr "自动调整当前盘上所有对象的朝向" +# AI Translated msgid "Arrange all objects" -msgstr "全局整理" +msgstr "自动摆放所有对象" +# AI Translated msgid "Arrange objects on selected plates" -msgstr "单盘整理" +msgstr "自动摆放所选盘上的对象" msgid "Assembly View" msgstr "装配体视图" @@ -6299,8 +6573,9 @@ msgstr "切片所有盘" msgid "Failed" msgstr "失败" +# AI Translated msgid "All Plates" -msgstr "所有打印板" +msgstr "所有盘" msgid "Stats" msgstr "统计" @@ -6360,8 +6635,9 @@ msgstr "坐标轴" msgid "Gridlines" msgstr "网格线" +# AI Translated msgid "Focus mode" -msgstr "" +msgstr "专注模式" msgid "Labels" msgstr "标签" @@ -6401,8 +6677,9 @@ msgstr "设置视角" msgid "Paint Toolbar" msgstr "上色工具条" +# AI Translated msgid "Assembly Control" -msgstr "拼装视图控制" +msgstr "装配体视图控制" msgid "Explosion Ratio" msgstr "爆炸比例" @@ -6432,15 +6709,18 @@ msgstr "检测到有对象放在盘的边界上。" msgid "A G-code path goes beyond the max print height." msgstr "检测出超出打印高度的G-code路径。" +# AI Translated msgid "A G-code path goes beyond plate boundaries." -msgstr "检测超出热床边界的G-code路径。" +msgstr "检测到超出热床边界的G-code路径。" +# AI Translated msgid "Not support printing 2 or more TPU filaments." -msgstr "不支持打印 2 根或更多 TPU 丝。" +msgstr "不支持打印 2 种或以上 TPU 耗材丝。" +# AI Translated #, c-format, boost-format msgid "Tool %d" -msgstr "工具%d" +msgstr "工具头%d" # AI Translated #, c-format, boost-format @@ -6454,8 +6734,9 @@ msgid "Filament %s is placed in the %s, but the generated G-code path exceeds th msgid_plural "Filaments %s are placed in the %s, but the generated G-code path exceeds the printable height of the %s." msgstr[0] "耗材丝 %s 放置在 %s 中，但生成的 G-code 路径超出了 %s 的可打印高度。" +# AI Translated msgid "Open wiki for more information." -msgstr "打开维基百科了解更多信息。" +msgstr "打开 Wiki 了解更多信息。" msgid "Only the object being edited is visible." msgstr "只有正在编辑的对象是可见的。" @@ -6466,29 +6747,36 @@ msgid "Filament %s cannot be printed directly on the surface of this plate." msgid_plural "Filaments %s cannot be printed directly on the surface of this plate." msgstr[0] "耗材丝 %s 不能直接打印在该盘的表面上。" +# AI Translated msgid "PLA and PETG filaments detected in the mixture. Adjust parameters according to the Wiki to ensure print quality." -msgstr "混合物中检测到 PLA 和 PETG 耗材。根据 Wiki 调整参数以保证打印质量。" +msgstr "检测到同时使用了 PLA 和 PETG 耗材丝。请根据 Wiki 调整参数以保证打印质量。" +# AI Translated msgid "The prime tower extends beyond the plate boundary." -msgstr "主塔延伸到板块边界之外。" +msgstr "擦拭塔超出了盘的边界。" +# AI Translated msgid "Partial flushing volume set to 0. Multi-color printing may cause color mixing in models. Please readjust flushing settings." -msgstr "部分冲洗量设置为 0。多色打印可能会导致模型混色。请重新调整冲水设置。" +msgstr "部分冲刷量设置为 0。多色打印可能会导致模型混色。请重新调整冲刷设置。" msgid "Click Wiki for help." msgstr "单击 Wiki 获取帮助。" +# AI Translated msgid "Click here to regroup" -msgstr "单击此处重新组合" +msgstr "单击此处重新分组" +# AI Translated msgid "Flushing Volume" -msgstr "冲水量" +msgstr "冲刷体积" msgid "Calibration step selection" msgstr "校准步骤选择" +# AI Translated +# Needs human review: BambuStudio uses 激光雷达; confirm keeping Micro Lidar in English msgid "Micro lidar calibration" -msgstr "微激光雷达校准" +msgstr "Micro Lidar 校准" msgid "Bed leveling" msgstr "热床调平" @@ -6496,8 +6784,9 @@ msgstr "热床调平" msgid "High-temperature Heatbed Calibration" msgstr "高温热床校准" +# AI Translated msgid "Nozzle clumping detection Calibration" -msgstr "喷嘴结块检测校准" +msgstr "裹头检测校准" msgid "Calibration program" msgstr "校准程序" @@ -6545,19 +6834,21 @@ msgstr "连接打印机（局域网）" msgid "Please input the printer access code:" msgstr "请输入打印机访问码：" +# AI Translated msgid "" "You can find it in \"Settings > Network > Access code\"\n" "on the printer, as shown in the figure:" msgstr "" -"您可以在“设置 > 网络 > 访问代码”中找到它\n" -"在打印机上，如图：" +"您可以在打印机的“设置 > 网络 > 访问码”中找到它，\n" +"如下图所示：" +# AI Translated msgid "" "You can find it in \"Setting > Setting > LAN only > Access Code\"\n" "on the printer, as shown in the figure:" msgstr "" -"您可以在“设置 > 设置 > 仅 LAN > 访问代码”中找到它\n" -"在打印机上，如图：" +"您可以在打印机的“设置 > 设置 > 仅局域网 > 访问码”中找到它，\n" +"如下图所示：" msgid "Invalid input" msgstr "非法输入" @@ -6847,11 +7138,13 @@ msgstr "克隆所选项" msgid "Clone copies of selections" msgstr "克隆多份所选项" +# AI Translated msgid "Duplicate Current Plate" -msgstr "复制当前打印板" +msgstr "复制当前盘" +# AI Translated msgid "Duplicate the current plate" -msgstr "复制当前打印板" +msgstr "复制当前盘" msgid "Selects all objects" msgstr "选中所有对象" @@ -6859,11 +7152,13 @@ msgstr "选中所有对象" msgid "Deselects all objects" msgstr "取消所有选中" +# AI Translated msgid "Use Perspective View" -msgstr "使用透视视角" +msgstr "使用透视视图" +# AI Translated msgid "Use Orthogonal View" -msgstr "使用正交视角" +msgstr "使用正交视图" msgid "Auto Perspective" msgstr "自动透视" @@ -6875,14 +7170,16 @@ msgstr "从俯视图、仰视图或侧视图切换时，自动在正交和透视 msgid "Show &G-code Window" msgstr "显示G-code窗口" +# AI Translated msgid "Show G-code window in Preview scene." -msgstr "显示G-code窗口" +msgstr "在预览场景中显示G-code窗口。" msgid "Show 3D Navigator" msgstr "显示3D导航器" +# AI Translated msgid "Show 3D navigator in Prepare and Preview scene." -msgstr "显示3D导航器" +msgstr "在“准备”和“预览”场景中显示3D导航器。" msgid "Show Gridlines" msgstr "显示网格线" @@ -6916,11 +7213,13 @@ msgstr "显示悬垂高亮" msgid "Show object overhang highlight in 3D scene." msgstr "在3D场景中显示悬垂高亮" +# AI Translated msgid "Show Selected Outline (beta)" -msgstr "显示选中轮廓（测试版）" +msgstr "显示选中轮廓线（试验）" +# AI Translated msgid "Show outline around selected object in 3D scene." -msgstr "在3D场景中显示选中对象的轮廓" +msgstr "在3D场景中显示选中对象的轮廓线。" msgid "Preferences" msgstr "偏好设置" @@ -6968,8 +7267,9 @@ msgstr "Pressure Advance" msgid "Flow ratio" msgstr "流量比例" +# AI Translated msgid "Flow Rate Calibration" -msgstr "流量校准" +msgstr "流量比例校准" msgid "Retraction" msgstr "回抽" @@ -7004,17 +7304,21 @@ msgstr "打开G-code 文件" msgid "Re&load from Disk" msgstr "从磁盘重新加载" +# AI Translated +# Needs human review: English source says 'plater'; confirm the wording once the source is fixed. msgid "Reload the plater from disk" -msgstr "从磁盘重新加载平台" +msgstr "从磁盘重新加载G-code文件" msgid "Export &Toolpaths as OBJ" msgstr "将工具路径导出为OBJ格式" +# AI Translated msgid "Open &Slicer" -msgstr "打开 Studio" +msgstr "打开切片软件" +# AI Translated msgid "Open Slicer" -msgstr "打开 Studio" +msgstr "打开切片软件" msgid "&Quit" msgstr "退出" @@ -7091,6 +7395,7 @@ msgstr "文件丢失" msgid "The project is no longer available." msgstr "此项目不可用。" +# AI Translated msgid "" "Do you want to synchronize your personal data from Orca Cloud?\n" "It contains the following information:\n" @@ -7101,14 +7406,15 @@ msgstr "" "是否要从 Orca Cloud 同步您的个人数据？\n" "它包含以下信息：\n" "1. 工艺预设\n" -"2. 耗材预设\n" +"2. 耗材丝预设\n" "3. 打印机预设" msgid "Synchronization" msgstr "同步" +# AI Translated msgid "The device cannot handle more conversations. Please retry later." -msgstr "设备无法处理更多的对话。请稍后重试。" +msgstr "设备无法处理更多会话。请稍后重试。" msgid "Player is malfunctioning. Please reinstall the system player." msgstr "播放器异常，请重新安装系统播放器。" @@ -7162,22 +7468,26 @@ msgstr "打印机已注销，无法连接。" msgid "LAN Connection Failed (Failed to start liveview)" msgstr "局域网连接失败（无法启动直播）" +# AI Translated msgid "" "Virtual Camera Tools is required for this task!\n" "Do you want to install them?" -msgstr "该功能需要“虚拟摄像头工具包”，是否下载并安装该工具包？" +msgstr "" +"该功能需要“虚拟摄像头工具包”！\n" +"是否下载并安装该工具包？" msgid "Downloading Virtual Camera Tools" msgstr "正在下载“虚拟摄像头工具包”" +# AI Translated msgid "" "Another virtual camera is running.\n" "Orca Slicer supports only a single virtual camera.\n" "Do you want to stop this virtual camera?" msgstr "" -"您想停止此虚拟摄像头吗？另一个虚拟摄像头正在工作。\n" -"Orca Slicer 同时只能支持一个虚拟摄像头。\n" -"是否停止前一个虚拟摄像头？" +"另一个虚拟摄像头正在运行。\n" +"Orca Slicer 仅支持一个虚拟摄像头。\n" +"是否停止该虚拟摄像头？" #, c-format, boost-format msgid "Virtual camera initialize failed (%s)!" @@ -7189,8 +7499,9 @@ msgstr "网络不可访问" msgid "Information" msgstr "信息" +# AI Translated msgid "Loading..." -msgstr "正在加载视频……" +msgstr "正在加载……" msgid "Year" msgstr "年" @@ -7269,9 +7580,10 @@ msgstr[0] "您将从打印机中删除%u个文件。确定要继续吗？" msgid "Delete files" msgstr "删除文件" +# AI Translated #, c-format, boost-format msgid "Do you want to delete the file '%s' from printer?" -msgstr "你确定要从打印机中删除文件'%s'吗？" +msgstr "您确定要从打印机中删除文件'%s'吗？" msgid "Delete file" msgstr "删除文件" @@ -7319,8 +7631,9 @@ msgstr "下载中 %d%%..." msgid "Air Condition" msgstr "空调" +# AI Translated msgid "Reconnecting the printer, the operation cannot be completed immediately, please try again later." -msgstr "重新连接打印机，该操作无法立即完成，请稍后再试。" +msgstr "正在重新连接打印机，该操作无法立即完成，请稍后再试。" msgid "Timeout, please try again." msgstr "超时，请重试。" @@ -7406,14 +7719,17 @@ msgstr "反转Y轴" msgid "Invert Z axis" msgstr "反转Z轴" +# AI Translated msgid "Invert Yaw axis" -msgstr "反转垂直轴，偏航轴" +msgstr "反转偏航轴" +# AI Translated msgid "Invert Pitch axis" -msgstr "反转横轴，俯仰轴" +msgstr "反转俯仰轴" +# AI Translated msgid "Invert Roll axis" -msgstr "反转纵轴，横滚轴" +msgstr "反转横滚轴" msgid "(LAN)" msgstr "（局域网）" @@ -7475,12 +7791,14 @@ msgstr "通过Pin码绑定" msgid "Bind with Access Code" msgstr "使用访问码绑定" +# AI Translated msgctxt "Quit_Switching" msgid "Quit" -msgstr "辞职" +msgstr "退出" +# AI Translated msgid "Switching..." -msgstr "交换..." +msgstr "切换中..." msgid "Switching failed" msgstr "切换失败" @@ -7488,8 +7806,9 @@ msgstr "切换失败" msgid "Printing progress" msgstr "打印进度" +# AI Translated msgid "Parts Skip" -msgstr "零件跳过" +msgstr "跳过零件" msgid "Stop" msgstr "停止" @@ -7511,8 +7830,9 @@ msgstr "" "您已经完成了商城模型的打印，\n" "但是评分信息的同步失败了。" +# AI Translated msgid "How do you like this printing file?" -msgstr "你觉得这个打印文件怎么样？" +msgstr "您觉得这个打印文件怎么样？" msgid "(The model has already been rated. Your rating will overwrite the previous rating.)" msgstr "（该模型已进行评分。您的评分将覆盖之前的评分。）" @@ -7527,13 +7847,14 @@ msgstr "正在计算..." # AI Translated msgctxt "Printer camera" msgid "Camera" -msgstr "摄像机" +msgstr "摄像头" msgid "Storage" msgstr "存储" +# AI Translated msgid "Camera Setting" -msgstr "相机设置" +msgstr "摄像头设置" msgid "Control" msgstr "控制" @@ -7577,25 +7898,28 @@ msgstr "您确定要停止打印吗？" msgid "The printer is busy with another print job." msgstr "打印机正在执行其他打印任务" +# AI Translated msgid "When printing is paused, filament loading and unloading are only supported for external slots." -msgstr "打印暂停时，仅外部插槽支持耗材装载和卸载。" +msgstr "打印暂停时，仅外置槽位支持进料和退料。" msgid "Current extruder is busy changing filament." msgstr "当前挤出机正忙于更换耗材丝。" # AI Translated msgid "\"Load\" or \"Unload\" is not supported for external spool while using Filament Track Switch." -msgstr "在使用 Filament Track Switch 时，外部料盘不支持“装载”或“卸载”。" +msgstr "使用耗材变轨器时，外置料盘不支持“进料”或“退料”。" # AI Translated msgid "The Filament Track Switch has not been setup. Please setup on printer." -msgstr "Filament Track Switch 尚未设置。请在打印机上进行设置。" +msgstr "耗材变轨器尚未设置。请在打印机上进行设置。" +# AI Translated msgid "Current slot has already been loaded." -msgstr "当前插槽已被加载。" +msgstr "当前槽位已进料。" +# AI Translated msgid "The selected slot is empty." -msgstr "所选插槽为空。" +msgstr "所选槽位为空。" msgid "Printer 2D mode does not support 3D calibration" msgstr "打印机 2D 模式不支持 3D 校准" @@ -7623,17 +7947,20 @@ msgstr "层： %d/%d" msgid "Please heat the nozzle to above 170℃ before loading or unloading filament." msgstr "请在进料或退料前把喷嘴升温到170℃以上。" +# AI Translated msgid "Chamber temperature cannot be changed in cooling mode while printing." -msgstr "打印时在冷却模式下无法更改腔室温度。" +msgstr "打印时在冷却模式下无法更改腔体温度。" +# AI Translated msgid "If the chamber temperature exceeds 40℃, the system will automatically switch to heating mode. Please confirm whether to switch." -msgstr "如果箱内温度超过 40℃，系统将自动切换至加热模式。请确认是否切换。" +msgstr "如果腔体温度超过 40℃，系统将自动切换至加热模式。请确认是否切换。" msgid "Please select an AMS slot before calibration" msgstr "请先选择一个AMS槽位后进行校准" +# AI Translated msgid "Cannot read filament info: the filament is loaded to the tool head. Please unload the filament and try again." -msgstr "无法读取耗材丝信息：耗材丝已经加载到工具头，请退出耗材丝后再重试。" +msgstr "无法读取耗材丝信息：耗材丝已经加载到工具头，请先退料再重试。" msgid "This only takes effect during printing" msgstr "仅在打印过程中生效" @@ -7652,8 +7979,9 @@ msgstr "运动" msgid "Ludicrous" msgstr "狂暴" +# AI Translated msgid "Turning off the lights during the task will cause the failure of AI monitoring, like spaghetti detection. Please choose carefully." -msgstr "任务过程中关灯会导致 AI 监控失败，就像炒面检测一样。请谨慎选择。" +msgstr "任务过程中关灯会导致炒面检测等 AI 监控失效。请谨慎选择。" msgid "Keep it On" msgstr "保持开启状态" @@ -7699,8 +8027,9 @@ msgstr "获取oss配置失败。" msgid "Upload Pictures" msgstr "上传图片" +# AI Translated msgid "Number of images successfully uploaded" -msgstr "图像上传成功" +msgstr "成功上传的图像数量" # AI Translated #. TRN %s is the path of an image file. @@ -7726,10 +8055,13 @@ msgstr "%s：没有相应的存储桶" msgid "%s cannot be opened" msgstr "无法打开 %s" +# AI Translated msgid "" "The following issues occurred during the process of uploading images. Do you want to ignore them?\n" "\n" -msgstr "在上传图像的过程中出现以下问题。你想忽略它们吗？\n" +msgstr "" +"上传图像的过程中出现以下问题。是否忽略这些问题？\n" +"\n" msgid "Synchronizing the printing results. Please retry a few seconds later." msgstr "正在同步打印结果。请稍后重试。" @@ -7757,8 +8089,9 @@ msgstr "" "\n" "是否跳转到网页进行评分？" +# AI Translated msgid "Some of your images failed to upload. Would you like to redirect to the webpage to give a rating?" -msgstr "您的一些图像上传失败。您是否想要重定向到评分网页？" +msgstr "部分图像上传失败。是否跳转到网页进行评分？" msgid "You can select up to 16 images." msgstr "您最多可以选择16张图像。" @@ -7773,8 +8106,9 @@ msgstr "" msgid "click to add machine" msgstr "点击添加打印机" +# AI Translated msgid "Status" -msgstr "设备状态" +msgstr "状态" msgctxt "Firmware" msgid "Update" @@ -7797,8 +8131,9 @@ msgstr "不再显示" msgid "Go to" msgstr "前往" +# AI Translated msgid "Later" -msgstr "之后" +msgstr "稍后" #, c-format, boost-format msgid "%s error" @@ -7845,11 +8180,13 @@ msgstr "3MF 文件版本比当前 OrcaSlicer 版本更新。" msgid "Updating your OrcaSlicer could enable all functionality in the 3MF file." msgstr "更新您的 OrcaSlicer 以启用 3MF 文件中的所有功能。" +# AI Translated msgid "Current Version: " -msgstr "当前版本：" +msgstr "当前版本： " +# AI Translated msgid "Latest Version: " -msgstr "最新版本：" +msgstr "最新版本： " msgctxt "Software" msgid "Update" @@ -7870,8 +8207,9 @@ msgstr "如果服务器处于故障状态，您可以暂时使用离线打印或 msgid "How to use LAN only mode" msgstr "如何使用仅局域网模式" +# AI Translated msgid "Don't show this dialog again" -msgstr "不再显示此对话框？" +msgstr "不再显示此对话框" msgid "Please refer to Wiki before use->" msgstr "使用前请参考 Wiki->" @@ -7961,8 +8299,9 @@ msgstr "最大体积流量校准" msgid "Pressure Advance Calibration" msgstr "Pressure Advance 校准" +# AI Translated msgid "Flow Ratio Calibration" -msgstr "流量比校准" +msgstr "流量比例校准" # AI Translated msgid "Retraction Calibration" @@ -8056,7 +8395,7 @@ msgstr "落到热床" # AI Translated msgid "Scale to Fit Print Volume" -msgstr "缩放以适应构建空间" +msgstr "缩放以适应构建体积" # AI Translated msgid "Increase Instances" @@ -8217,20 +8556,23 @@ msgstr "安全移除硬件。" msgid "Ejecting." msgstr "正在弹出。" +# AI Translated #, c-format, boost-format msgid "%1$d Object has custom supports." msgid_plural "%1$d Objects have custom supports." -msgstr[0] "%1$d 模型有自定义支撑。" +msgstr[0] "%1$d 个对象有自定义支撑。" +# AI Translated #, c-format, boost-format msgid "%1$d Object has color painting." msgid_plural "%1$d Objects have color painting." -msgstr[0] "%1$d对象有涂色。" +msgstr[0] "%1$d 个对象有涂色。" +# AI Translated #, c-format, boost-format msgid "%1$d object was loaded as a part of cut object." msgid_plural "%1$d objects were loaded as parts of cut object." -msgstr[0] "%1$d对象加载为一个切割对象的子部件" +msgstr[0] "%1$d 个对象已作为切割对象的零件加载。" #, c-format, boost-format msgid "%1$d object was loaded with fuzzy skin painting." @@ -8263,8 +8605,9 @@ msgstr "错误：" msgid "Warning:" msgstr "警告：" +# AI Translated msgid "Exported successfully" -msgstr "导出成功." +msgstr "导出成功" msgid "Model file downloaded." msgstr "已下载模型文件。" @@ -8284,17 +8627,20 @@ msgstr "浏览共享配置文件" msgid "Serious warning:" msgstr "严重警告：" +# AI Translated msgid " (Repair)" -msgstr "（修复）" +msgstr " （修复）" +# AI Translated msgid " Click here to install it." -msgstr "点击此处安装" +msgstr " 点击此处安装。" msgid "WARNING:" msgstr "警告：" +# AI Translated msgid "Your model needs support! Please enable support material." -msgstr "你的模型需要支撑才能打印。请开启材料支撑选项。" +msgstr "您的模型需要支撑！请启用支撑。" msgid "G-code path overlap" msgstr "G-code路径重叠" @@ -8356,11 +8702,11 @@ msgstr "底部" # AI Translated msgid "This setting does not specify a plugin capability type." -msgstr "此设置未指定插件能力类型。" +msgstr "此设置未指定插件功能类型。" # AI Translated msgid "This setting specifies an unrecognized plugin capability type: " -msgstr "此设置指定了无法识别的插件能力类型： " +msgstr "此设置指定了无法识别的插件功能类型： " msgid "Plugin Selection" msgstr "插件选择" @@ -8375,10 +8721,11 @@ msgstr "" # AI Translated msgid "There is stringing-prone filament in the current print job. Enabling nozzle clumping detection now may degrade print quality. Are you sure you want to enable it?" -msgstr "当前打印任务中存在易拉丝的耗材。此时启用喷嘴结块检测可能会降低打印质量。您确定要启用吗？" +msgstr "当前打印任务中存在易拉丝的耗材丝。此时启用裹头检测可能会降低打印质量。您确定要启用吗？" +# AI Translated msgid "Enable Nozzle Clumping Detection" -msgstr "裹头检测" +msgstr "启用裹头检测" msgid "When enabled, the printer will automatically capture photos of printed parts and upload them to the cloud. Would you like to enable this option?" msgstr "启用此功能后，打印机将自动拍摄打印件的照片并将其上传至云端。是否要启用此选项？" @@ -8395,8 +8742,9 @@ msgstr "检测打印板的定位标记，如果标记不在预定义范围内时 msgid "Build Plate Detection" msgstr "打印板检测" +# AI Translated msgid "Identifies the type and position of the build plate on the heatbed. Pausing printing if a mismatch is detected." -msgstr "识别打印平台板在热床上的类型和位置。如果检测到不匹配，则暂停打印。" +msgstr "识别热床上打印板的类型和位置。如果检测到不匹配，则暂停打印。" msgid "Purifies the chamber air as the print finishes, based on the selected mode." msgstr "每次打印结束时，根据所选方式净化打印机的腔体空气。" @@ -8404,14 +8752,17 @@ msgstr "每次打印结束时，根据所选方式净化打印机的腔体空气 msgid "Purifies the chamber air through internal circulation as each print finishes." msgstr "每次打印结束时，通过内循环净化打印机的腔体空气。" +# AI Translated msgid "Automatically match the corresponding switch strategy for leak-prone filaments (disable blob detection) and regular filaments (enable blob detection)." -msgstr "对易拉丝耗材(关闭裹头检测)与常规耗材(开启裹头检测)自动匹配相应的开关策略。" +msgstr "对易拉丝耗材丝(关闭裹头检测)与常规耗材丝(开启裹头检测)自动匹配相应的开关策略。" +# AI Translated msgid "Detect whether the nozzle is wrapped by filament or other foreign matter." -msgstr "检测喷嘴是否被耗材或其他异物包裹住。" +msgstr "检测喷嘴是否被耗材丝或其他异物包裹住。" +# AI Translated msgid "After disabling, nozzle wrapping cannot be detected, which may lead to print failure or nozzle damage." -msgstr "关闭后无法发现喷嘴包裹,可能导致打印失败或喷嘴损坏。" +msgstr "关闭后无法发现喷嘴包裹，可能导致打印失败或喷嘴损坏。" msgid "AI Detections" msgstr "人工智能检测" @@ -8431,17 +8782,21 @@ msgstr "炒面检测" msgid "Detect spaghetti failures (scattered lose filament)." msgstr "检测炒面故障（散落松脱的耗材丝）。" +# AI Translated +# Needs human review: Check the label length; BambuStudio shortens it to 堆料检测. msgid "Purge Chute Pile-Up Detection" -msgstr "清理溜槽堆积检测" +msgstr "冲刷废料槽堆积检测" +# AI Translated msgid "Monitor if the waste is piled up in the purge chute." -msgstr "监控废物是否堆积在清理溜槽中。" +msgstr "监控冲刷废料是否堆积在废料槽中。" msgid "Nozzle Clumping Detection" msgstr "裹头检测" +# AI Translated msgid "Check if the nozzle is clumping by filaments or other foreign objects." -msgstr "检查喷嘴是否被耗材或其他异物堵塞。" +msgstr "检查喷嘴是否被耗材丝或其他异物包裹。" msgid "Detects air printing caused by nozzle clogging or filament grinding." msgstr "检测由于喷嘴堵塞或耗材丝研磨造成的空打。" @@ -8491,8 +8846,9 @@ msgstr "打印件位移检测" msgid "Monitors the printed part during printing and alerts immediately if it shifts or collapses." msgstr "检测打印中的打印件状态，若发生移动或倒塌则立即提醒。" +# AI Translated msgid "Checks if the nozzle is clumping by filament or other foreign objects." -msgstr "检查喷嘴是否被耗材或其他异物堵塞。" +msgstr "检查喷嘴是否被耗材丝或其他异物包裹。" msgid "On" msgstr "开" @@ -8520,9 +8876,10 @@ msgctxt "Nozzle Diameter" msgid "Diameter" msgstr "直径" +# AI Translated msgctxt "Nozzle Flow" msgid "Flow" -msgstr "流动" +msgstr "流量" msgid "Please change the nozzle settings on the printer." msgstr "请更改打印机上的喷嘴设置。" @@ -8542,8 +8899,9 @@ msgstr "没有适用于此打印机的 wiki 链接。" msgid "Unavailable while heating maintenance function is on." msgstr "加热维护功能开启时不可用。" +# AI Translated msgid "Idle Heating Protection" -msgstr "怠速加热保护" +msgstr "空闲加热保护" msgid "Stops heating automatically after 5 mins of idle to ensure safety." msgstr "闲置 5 分钟后自动停止加热，确保安全。" @@ -8671,11 +9029,13 @@ msgstr "放弃对此模式所做的未保存修改（恢复为已保存的值） msgid "Remove current plate (if not last one)" msgstr "移除当前盘（如果不是最后一个）" +# AI Translated msgid "Auto orient objects on current plate" -msgstr "在当前盘上自动调整零件的朝向" +msgstr "自动调整当前盘上对象的朝向" +# AI Translated msgid "Arrange objects on current plate" -msgstr "在当前盘上排列零件" +msgstr "自动摆放当前盘上的对象" msgid "Unlock current plate" msgstr "解锁当前盘" @@ -8756,8 +9116,9 @@ msgstr "正在切片盘 %1%：%2%" msgid "Invalid name, the following characters are not allowed:" msgstr "无效名称，不允许使用以下字符：" +# AI Translated msgid "Sliced Info" -msgstr "切片你信息" +msgstr "切片信息" msgid "Used Filament (m)" msgstr "耗材丝消耗长度 (m)" @@ -8791,7 +9152,7 @@ msgstr "配置不兼容" # AI Translated msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing." -msgstr "检测到耗材切换器。现在所有 AMS 耗材均可供两个挤出机使用。切片器将自动分配以获得最佳打印效果。" +msgstr "检测到耗材切换器。现在所有 AMS 耗材丝均可供两个挤出机使用。切片器将自动分配以获得最佳打印效果。" # AI Translated msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use." @@ -8822,8 +9183,9 @@ msgstr "连接" msgid "Synchronize nozzle information and the number of AMS" msgstr "同步喷嘴信息和 AMS 数量" +# AI Translated msgid "Click to edit preset" -msgstr "点击编辑配置" +msgstr "点击编辑预设" # AI Translated #. TRN Sidebar label of the printer variant (nozzle) selector; picking one switches the printer preset. @@ -8843,17 +9205,21 @@ msgstr "冲刷模式" msgid "Flushing volumes" msgstr "冲刷体积" +# AI Translated msgid "Add one filament" -msgstr "增加一个材料" +msgstr "增加一个耗材丝" +# AI Translated msgid "Remove last filament" -msgstr "删除最后一个材料" +msgstr "删除最后一个耗材丝" +# AI Translated msgid "Synchronize filament list from AMS" -msgstr "从AMS同步材料列表" +msgstr "从AMS同步耗材丝列表" +# AI Translated msgid "Set filaments to use" -msgstr "配置可选择的材料" +msgstr "配置可选择的耗材丝" # AI Translated msgid "Add Mixed Filament" @@ -8907,11 +9273,13 @@ msgstr "目标混合耗材丝将此物理耗材丝用作组分。合并将移除 msgid "After completing your operation, %s project will be closed and create a new project." msgstr "完成操作后，%s 项目将关闭并创建一个新项目。" +# AI Translated msgid "There are no compatible filaments, and sync is not performed." -msgstr "没有如任何兼容的材料，同步操作未执行。" +msgstr "没有任何兼容的耗材丝，未执行同步。" +# AI Translated msgid "Sync filaments with AMS" -msgstr "同步到 AMS 的材料列表" +msgstr "与 AMS 同步耗材丝" msgid "" "There are some unknown or incompatible filaments mapped to generic preset.\n" @@ -8934,9 +9302,10 @@ msgstr "是否保存修改到“%1%”？" msgid "UV Editor" msgstr "UV 编辑器" +# AI Translated #, c-format, boost-format msgid "Successfully unmounted. The device %s (%s) can now be safely removed from the computer." -msgstr "卸载成功。设备%s(%s)现在可能安全地从电脑移除。" +msgstr "卸载成功。现在可以安全地从电脑移除设备 %s（%s）。" #, c-format, boost-format msgid "Ejecting of device %s (%s) has failed." @@ -8948,23 +9317,27 @@ msgstr "检测到有未保存的项目，是否恢复此项目？" msgid "Restore" msgstr "恢复" +# AI Translated msgid "The current heatbed temperature is relatively high. The nozzle may clog when printing this filament in a closed environment. Please open the front door and/or remove the upper glass." -msgstr "当前热床温度相对较高。在封闭式外壳中打印这种丝可能会导致喷嘴堵塞。请打开前门和/或取下上部玻璃。" +msgstr "当前热床温度相对较高。在封闭环境中打印此耗材丝可能会导致喷嘴堵塞。请打开前门和/或取下上部玻璃。" +# AI Translated msgid "The nozzle hardness required by the filament is higher than the default nozzle hardness of the printer. Please replace the hardened nozzle or filament, otherwise, the nozzle will be worn down or damaged." -msgstr "打印丝所要求的喷嘴硬度高于打印机默认的喷嘴硬度。请更换硬化的喷嘴或打印丝，否则喷嘴可能被磨损或损坏。" +msgstr "该耗材丝所要求的喷嘴硬度高于打印机默认的喷嘴硬度。请更换为硬化喷嘴或更换耗材丝，否则喷嘴可能会磨损或损坏。" msgid "Enabling traditional timelapse photography may cause surface imperfections. It is recommended to change to smooth mode." msgstr "启用传统的延时摄影可能会导致表面瑕疵。建议更改为平滑模式。" +# AI Translated msgid "Smooth mode for timelapse is enabled, but the prime tower is off, which may cause print defects. Please enable the prime tower, re-slice and print again." -msgstr "延时拍摄的平滑模式已启用，但底墨塔已关闭，这可能会导致打印缺陷。请启用主塔，重新切片并再次打印。" +msgstr "延时摄影的平滑模式已启用，但擦拭塔已关闭，这可能会导致打印缺陷。请启用擦拭塔，重新切片后再打印。" msgid "Expand sidebar" msgstr "展开侧边栏" +# AI Translated msgid "Collapse sidebar" -msgstr "折叠边栏" +msgstr "折叠侧边栏" #, c-format, boost-format msgid "Loading file: %s" @@ -8985,8 +9358,9 @@ msgstr "该 3MF 文件由较旧的版本生成，仅加载几何数据。" msgid "The 3MF file was generated by BambuStudio, loading geometry data only." msgstr "该 3MF 文件由 BambuStudio 生成，仅加载几何数据。" +# AI Translated msgid "This project was created with an OrcaSlicer 2.3.1-alpha and uses infill rotation template settings that may not work properly with your current infill pattern. This could result in weak support or print quality issues." -msgstr "该项目由 OrcaSlicer 2.3.1-alpha 创建，并使用了填充旋转模板设置，这些设置可能无法与您当前的填充模式正常配合，可能导致支撑不足或打印质量问题。" +msgstr "该项目由 OrcaSlicer 2.3.1-alpha 创建，并使用了填充旋转模板设置，这些设置可能无法与您当前的填充图案正常配合，可能导致支撑不足或打印质量问题。" msgid "Would you like OrcaSlicer to automatically fix this by clearing the rotation template settings?" msgstr "您是否希望 OrcaSlicer 清除旋转模板设置以自动修复此问题？" @@ -9008,20 +9382,25 @@ msgstr "在3mf文件中发现无效值：" msgid "Please correct them in the Param tabs" msgstr "请在参数页更正它们" +# AI Translated msgid "The 3MF has the following modified G-code in filament or printer presets:" -msgstr "该3mf文件中的材料或者打印机预设包含以下修改过的G-codes:" +msgstr "该 3MF 文件的耗材丝或打印机预设中包含以下修改过的 G-code：" +# AI Translated msgid "Please confirm that all modified G-code is safe to prevent any damage to the machine!" -msgstr "请确认这些修改过的G-codes是否安全，以防止对机器造成任何损坏！" +msgstr "请确认所有修改过的 G-code 都是安全的，以免对机器造成任何损坏！" +# AI Translated msgid "Modified G-code" -msgstr "修改过的G-codes" +msgstr "修改过的 G-code" +# AI Translated msgid "The 3MF has the following customized filament or printer presets:" -msgstr "该3MF文件包含以下自定义的材料或打印机预设:" +msgstr "该 3MF 文件包含以下自定义的耗材丝或打印机预设：" +# AI Translated msgid "Please confirm that the G-code within these presets is safe to prevent any damage to the machine!" -msgstr "请确认这些预设中的G-codes是否安全，以防止对机器造成任何损坏!" +msgstr "请确认这些预设中的 G-code 是安全的，以免对机器造成任何损坏！" msgid "Customized Preset" msgstr "自定义的预设" @@ -9054,13 +9433,14 @@ msgstr "体积为零的对象已被移除" msgid "The volume of the object is zero" msgstr "对象的体积为零" +# AI Translated #, c-format, boost-format msgid "" "The object from file %s is too small, and may be in meters or inches.\n" "Do you want to scale to millimeters?" msgstr "" -"文件 %s 中对象的尺寸过小，似乎是以米（m）或者英寸（inch）为单位定义的。\n" -"OrcaSlicer的内部单位为毫米（mm）。是否要转换成毫米（mm）？" +"文件 %s 中对象的尺寸过小，可能是以米或英寸为单位。\n" +"是否将其缩放为毫米？" msgid "Object too small" msgstr "对象尺寸过小" @@ -9075,8 +9455,9 @@ msgstr "" "是否将该文件加载为一个由多个零件组成的对象，\n" "而非多个独立的对象？" +# AI Translated msgid "Multi-part object detected" -msgstr "检测到多部分对象" +msgstr "检测到多零件对象" # AI Translated msgid "Matching textures to filaments" @@ -9095,9 +9476,10 @@ msgstr "检测到多零件对象" msgid "Auto-Drop" msgstr "自动落板" +# AI Translated #, c-format, boost-format msgid "Connected printer is %s. It must match the project preset for printing.\n" -msgstr "连接的打印机是 %s。它必须与打印预设的项目相匹配。\n" +msgstr "连接的打印机是 %s。打印前它必须与项目预设相匹配。\n" msgid "Do you want to sync the printer information and automatically switch the preset?" msgstr "您想要同步打印机信息并自动切换预设吗？" @@ -9109,8 +9491,9 @@ msgstr "此项目包含一个在“设计”标签页中创建的模型，且不 msgid "The file does not contain any geometry data." msgstr "此文件不包含任何几何数据。" +# AI Translated msgid "Your object appears to be too large, do you want to scale it down to fit the print bed automatically?" -msgstr "对象看起来太大，希望将对象自动缩小以适应热床吗？" +msgstr "对象似乎过大，是否自动缩小以适应热床？" msgid "Object too large" msgstr "对象太大" @@ -9118,8 +9501,9 @@ msgstr "对象太大" msgid "Export STL file:" msgstr "导出 STL 文件：" +# AI Translated msgid "Export Draco file:" -msgstr "导出德拉科文件：" +msgstr "导出 Draco 文件：" msgid "Export AMF file:" msgstr "导出AMF文件：" @@ -9130,13 +9514,14 @@ msgstr "文件另存为：" msgid "Export OBJ file:" msgstr "导出OBJ文件：" +# AI Translated #, c-format, boost-format msgid "" "The file %s already exists.\n" "Do you want to replace it?" msgstr "" -"文件 %s 已经存在\n" -"您是否要替换它？" +"文件 %s 已存在。\n" +"是否替换？" msgid "Confirm Save As" msgstr "确认另存为" @@ -9160,8 +9545,9 @@ msgstr "删除对象" msgid "Reset Project" msgstr "重置项目" +# AI Translated msgid "The selected object couldn't be split." -msgstr "选中的模型不可分裂。" +msgstr "无法拆分所选对象。" msgid "Disable Auto-Drop to preserve Z positioning?\n" msgstr "禁用自动落板以保留 Z 轴定位？\n" @@ -9198,8 +9584,9 @@ msgstr "未选择替换文件" msgid "Replace with 3D file" msgstr "替换为 3D 文件" +# AI Translated msgid "Select folder to replace from" -msgstr "选择要替换的文件夹" +msgstr "选择用于替换的文件夹" msgid "Directory for the replace wasn't selected" msgstr "未选择替换目录" @@ -9223,8 +9610,10 @@ msgstr "✖ 跳过%s：替换失败。\n" msgid "✔ Replaced %s.\n" msgstr "✔ 替换了 %s。\n" +# AI Translated +# Needs human review: Glossary gives 体积 for a mesh volume; 已替换的零件 would read more naturally if the glossary is revised. msgid "Replaced volumes" -msgstr "替换的卷" +msgstr "已替换的体积" msgid "Please select a file" msgstr "请选择一个文件" @@ -9323,13 +9712,14 @@ msgstr "" "仅预览模式：\n" "被加载的文件仅包含G-Code，不支持进入准备页面" +# AI Translated msgid "" "The nozzle type and AMS quantity information has not been synced from the connected printer.\n" "After syncing, software can optimize printing time and filament usage when slicing.\n" "Would you like to sync now?" msgstr "" "喷嘴类型和 AMS 数量信息尚未与连接的打印机同步。\n" -"同步后，软件可以优化切片时的打印时间和耗材使用情况。\n" +"同步后，软件可以优化切片时的打印时间和耗材丝使用情况。\n" "您想现在同步吗？" msgid "Sync now" @@ -9367,8 +9757,9 @@ msgstr "正在更新 3D 视图..." msgid "Texture colors applied." msgstr "纹理颜色已应用。" +# AI Translated msgid "You can keep the modified presets for the new project or discard them" -msgstr "您可以保留修改的预设到新项目中或者忽略这些修改" +msgstr "您可以将修改后的预设保留给新项目，或放弃这些修改" msgid "Creating a new project" msgstr "创建新项目" @@ -9460,8 +9851,9 @@ msgstr "温度塔" msgid "Nozzle temperature test" msgstr "喷嘴温度测试" +# AI Translated msgid "Max volumetric speed test" -msgstr "最大体积流量速度测试" +msgstr "最大体积流量测试" msgid "VFA test" msgstr "VFA振纹测试" @@ -9528,8 +9920,9 @@ msgstr "正在加载G-code文件" msgid "G-code files and models cannot be loaded together!" msgstr "G-code文件不能和模型一起加载" +# AI Translated msgid "Unable to add models in preview mode" -msgstr "在预览模式不允许添加模型" +msgstr "预览模式下无法添加模型" msgid "All objects will be removed, continue?" msgstr "即将删除所有对象，是否继续？" @@ -9602,8 +9995,9 @@ msgstr "原因：零件\"%1%\"有自相交。" msgid "Reason: \"%1%\" and another part have no intersection." msgstr "原因：零件\"%1%\"与另一个零件没有交集。" +# AI Translated msgid "Unable to perform boolean operation on model meshes. Only positive parts will be exported." -msgstr "无法对模型网格执行布尔运算。只有正面部分将被导出。" +msgstr "无法对模型网格执行布尔运算。只会导出正体积部分。" msgid "Flashforge host is not available." msgstr "Flashforge 主机不可用。" @@ -9611,8 +10005,9 @@ msgstr "Flashforge 主机不可用。" msgid "Unable to log in to the Flashforge printer." msgstr "无法登录到 Flashforge 打印机。" +# AI Translated msgid "Is the printer ready? Is the print sheet in place, empty and clean?" -msgstr "打印机是否就绪？打印平台是否在正确的位置、有没有异物、是否干净？" +msgstr "打印机是否就绪？打印板是否已放置到位、无异物且干净？" msgid "Upload and Print" msgstr "上传并打印" @@ -9620,12 +10015,13 @@ msgstr "上传并打印" msgid "Abnormal print file data. Please slice again" msgstr "打印文件数据异常，请重新切片" +# AI Translated msgid "" "Print By Object: \n" "We suggest using auto-arrange to avoid collisions when printing." msgstr "" "逐件打印：\n" -"建议使用自动摆盘避免打印时发生碰撞。" +"建议使用自动摆放避免打印时发生碰撞。" # AI Translated msgid "Send G-code" @@ -9634,8 +10030,9 @@ msgstr "发送 G-code" msgid "Send to printer" msgstr "发送到打印机" +# AI Translated msgid "Custom supports and color painting were removed before repairing." -msgstr "自定义的支撑和涂色在模型修复之前将被清除。" +msgstr "修复前已清除自定义支撑和涂色。" msgid "Optimize Rotation" msgstr "优化旋转" @@ -9652,11 +10049,13 @@ msgstr "OrcaSlicer 无法连接到 %s。请检查打印机是否已开机并连 msgid "The currently connected printer on the device page is not %s. Please switch to %s before syncing." msgstr "设备页面当前连接的打印机不是%s。同步前请切换到 %s。" +# AI Translated msgid "There are no filaments on the printer. Please load the filaments on the printer first." -msgstr "打印机上没有耗材。请先将耗材装入打印机。" +msgstr "打印机上没有耗材丝。请先将耗材丝装入打印机。" +# AI Translated msgid "The filaments on the printer are all unknown types. Please go to the printer screen or software device page to set the filament type." -msgstr "打印机上的耗材都是未知类型。请进入打印机屏幕或软件设备页面设置耗材类型。" +msgstr "打印机上的耗材丝都是未知类型。请进入打印机屏幕或软件设备页面设置耗材丝类型。" msgid "Device Page" msgstr "设备页面" @@ -9690,7 +10089,7 @@ msgstr "立即激活" # AI Translated msgid "The installed plugin does not provide the required capability — it may be outdated:" -msgstr "已安装的插件未提供所需的功能 — 它可能已过时：" +msgstr "已安装的插件未提供所需的功能，可能已过时：" # AI Translated msgid "Preparing to install plugins..." @@ -9702,7 +10101,7 @@ msgstr "正在安装插件" # AI Translated msgid "Cancelling — finishing the current plugin..." -msgstr "正在取消 — 正在完成当前插件……" +msgstr "正在取消，将先完成当前插件……" # AI Translated #, boost-format @@ -9712,13 +10111,15 @@ msgstr "正在安装 %1%……" msgid "Plate Settings" msgstr "盘参数设置" +# AI Translated #, boost-format msgid "Number of currently selected parts: %1%\n" -msgstr "当前选择的零件数量: %1%\n" +msgstr "当前选择的零件数量：%1%\n" +# AI Translated #, boost-format msgid "Number of currently selected objects: %1%\n" -msgstr "当前选择的对象数量: %1%\n" +msgstr "当前选择的对象数量：%1%\n" #, boost-format msgid "Part name: %1%\n" @@ -9751,9 +10152,10 @@ msgstr "三角形：%1%\n" msgid "Use \"Fix Model\" to repair the mesh." msgstr "使用“修复模型”来修复网格。" +# AI Translated #, c-format, boost-format msgid "Plate %d: %s is not suggested for use printing filament %s (%s). If you still want to do this print job, please set this filament's bed temperature to a number that is not zero." -msgstr "热床 %d：%s不建议被用于打印%s（%s）材料。如果你依然想打印，请设置耗材对应的热床温度为非零值。" +msgstr "盘 %d：不建议使用 %s 打印 %s（%s）耗材丝。如果您仍想执行此打印任务，请将该耗材丝的热床温度设置为非零值。" msgid "Currently, the object configuration form cannot be used with a multiple-extruder printer." msgstr "目前，对象配置表单不能与多挤出机打印机一起使用。" @@ -9774,7 +10176,7 @@ msgid "" "T%1% — no filament routed\n" "Add an extruder in the Machine tab so this head has a filament slot." msgstr "" -"T%1% — 未分配耗材丝\n" +"T%1%：未分配耗材丝\n" "请在“打印机”选项卡中添加挤出机，使该工具头拥有耗材丝槽位。" # AI Translated @@ -9842,12 +10244,15 @@ msgstr "区域选择" msgid "sec" msgstr "秒" +# AI Translated msgid "The period of backup in seconds." -msgstr "备份的周期" +msgstr "备份间隔（秒）。" +# AI Translated msgid "Bed Temperature Difference Warning" -msgstr "热床温度不同警告" +msgstr "热床温差警告" +# AI Translated msgid "" "Using filaments with significantly different temperatures may cause:\n" "• Extruder clogging\n" @@ -9856,10 +10261,12 @@ msgid "" "\n" "Continue with enabling this feature?" msgstr "" -"使用温度显着不同的耗材丝可能会导致：\n" +"使用温度差异显著的耗材丝可能会导致：\n" "• 挤出机堵塞\n" "• 喷嘴损坏\n" -"• 层间附着力问题 继续启用此功能吗？" +"• 层间附着力问题\n" +"\n" +"是否继续启用此功能？" msgid "Browse" msgstr "浏览" @@ -9870,6 +10277,7 @@ msgstr "选择下载项目的文件夹" msgid "Choose Download Directory" msgstr "选择下载文件夹" +# AI Translated #, c-format, boost-format msgid "" "You've selected network plug-in version %s.\n" @@ -9877,7 +10285,12 @@ msgid "" "Would you like to download and install this version now?\n" "\n" "Note: The application may need to restart after installation." -msgstr "您已选择网络插件版本 %s。 您想立即下载并安装此版本吗？ 注意：安装后应用程序可能需要重新启动。" +msgstr "" +"您已选择网络插件版本 %s。\n" +"\n" +"是否立即下载并安装此版本？\n" +"\n" +"注意：安装后可能需要重新启动应用程序。" msgid "Download Network Plug-in" msgstr "下载网络插件" @@ -9909,14 +10322,16 @@ msgstr "关联 %s://" msgid "Associate %s:// with OrcaSlicer so that Orca can open models from %s" msgstr "将 %s:// 与 OrcaSlicer 关联，以便 Orca 能够打开来自 %s 的模型" +# AI Translated msgid "Current Association: " -msgstr "当前相关项" +msgstr "当前关联： " msgid "Current Instance" msgstr "当前实例" +# AI Translated msgid "Current Instance Path: " -msgstr "当前实例路径" +msgstr "当前实例路径： " msgid "General" msgstr "常规" @@ -9975,26 +10390,31 @@ msgstr "下载项目的目标文件夹" msgid "Load All" msgstr "加载全部" +# AI Translated msgid "Ask When Relevant" -msgstr "当相关时查询" +msgstr "必要时询问" +# AI Translated msgid "Always Ask" -msgstr "总是提问" +msgstr "始终询问" msgid "Load Geometry Only" msgstr "仅加载几何形状" +# AI Translated msgid "Load behavior" -msgstr "加载 交互项" +msgstr "加载行为" +# AI Translated msgid "Should printer/filament/process settings be loaded when opening a 3MF file?" -msgstr "printter/filament/process 设置项文件能否以 .3mf后缀方式打开" +msgstr "打开 3MF 文件时，是否加载其中的打印机/耗材丝/工艺设置？" msgid "Auto backup" msgstr "自动备份" +# AI Translated msgid "Backup your project periodically to help with restoring from an occasional crash." -msgstr "定期备份你的项目，以便从偶尔的崩溃中恢复过来。" +msgstr "定期备份您的项目，以便在偶发崩溃后恢复。" msgid "Maximum recent files" msgstr "最大最近使用文件数" @@ -10002,11 +10422,13 @@ msgstr "最大最近使用文件数" msgid "Maximum count of recent files" msgstr "最近使用文件的最大数量" +# AI Translated msgid "Add STL/STEP files to recent files list" -msgstr "添加模型文件 STL/STEP 到最近文件列表" +msgstr "将 STL/STEP 文件添加到最近文件列表" +# AI Translated msgid "Don't warn when loading 3MF with modified G-code" -msgstr "加载具有修改的 G-Code 的 3MF 时不会出现警告" +msgstr "加载含有已修改 G-code 的 3MF 时不发出警告" msgid "Show options when importing STEP file" msgstr "显示STEP网格参数设置对话框" @@ -10048,7 +10470,7 @@ msgstr "" # AI Translated msgid "STEP importing: Split into multiple objects" -msgstr "STEP 导入：拆分为多个物体" +msgstr "STEP 导入：拆分为多个对象" # AI Translated msgid "" @@ -10056,7 +10478,7 @@ msgid "" "Used as the default in the import dialog, or directly when the import dialog is disabled.\n" "Default: disabled." msgstr "" -"如果启用，导入的 STEP 文件中的复合(compound)和复合实体(compsolid)形状将被拆分为多个物体。\n" +"如果启用，导入的 STEP 文件中的复合(compound)和复合实体(compsolid)形状将被拆分为多个对象。\n" "用作导入对话框中的默认值，或在禁用导入对话框时直接使用。\n" "默认值：禁用。" @@ -10089,11 +10511,13 @@ msgstr "预设" msgid "Remember printer configuration" msgstr "记住打印机选项" +# AI Translated msgid "If enabled, Orca will remember and switch filament/process configuration for each printer automatically." -msgstr "如果启用，Orca会自动记录并切换您不同打印机之间的耗材配置与打印参数。" +msgstr "如果启用，Orca会自动记录并切换您不同打印机之间的耗材丝配置与打印参数。" +# AI Translated msgid "Group user filament presets" -msgstr "组用户耗材丝预设" +msgstr "对用户耗材丝预设分组" msgid "Group user filament presets based on selection" msgstr "根据选择对用户耗材丝预设进行分组" @@ -10104,14 +10528,16 @@ msgstr "按类型" msgid "By vendor" msgstr "按供应商" +# AI Translated msgid "Optimize filaments area height for..." -msgstr "为以下数量优化耗材区域高度..." +msgstr "为以下数量优化耗材丝区域高度..." msgid "filaments" msgstr "耗材丝" +# AI Translated msgid "Optimizes filament area maximum height by chosen filament count." -msgstr "根据选定的耗材丝数量优化耗材区域最大高度" +msgstr "根据选定的耗材丝数量优化耗材丝区域最大高度。" msgid "Show shared profiles notification" msgstr "显示共享配置文件通知" @@ -10175,14 +10601,17 @@ msgstr "作为固定标签显示的插件页数量，其余页面将折叠到最 msgid "Behavior" msgstr "行为" +# AI Translated msgid "Auto flush after changing..." -msgstr "更换后自动冲洗..." +msgstr "更改后自动冲刷..." +# AI Translated msgid "Auto calculate flushing volumes when selected values changed" -msgstr "当选定值更改时自动计算冲洗量" +msgstr "选定值更改时自动计算冲刷体积" +# AI Translated msgid "Auto arrange plate after cloning" -msgstr "克隆后自动排列打印板" +msgstr "克隆后自动摆放盘" msgid "Auto slice after changes" msgstr "更改后自动切片" @@ -10190,8 +10619,9 @@ msgstr "更改后自动切片" msgid "If enabled, OrcaSlicer will re-slice automatically whenever slicing-related settings change." msgstr "如果启用，OrcaSlicer 将在切片相关设置发生更改时自动重新切片。" +# AI Translated msgid "Delay in seconds before auto slicing starts, allowing multiple edits to be grouped. Use 0 to slice immediately." -msgstr "自动切片开始前延迟几秒，允许对多个编辑进行分组。使用 0 立即切片。" +msgstr "自动切片开始前的延迟时间（秒），可将多次修改合并后再切片。设为 0 则立即切片。" msgid "Remove mixed temperature restriction" msgstr "解除混合温度限制" @@ -10207,8 +10637,9 @@ msgstr "记住上次的打印操作" msgid "If enabled, OrcaSlicer will remember the last selected option in the print button's dropdown (e.g. Print, Export plate sliced file, Export G-code file) and use it as the default on next startup." msgstr "启用后，OrcaSlicer 将记住打印按钮下拉菜单中上次选择的选项（例如打印、导出单盘切片文件、导出 G-code 文件），并在下次启动时将其作为默认选项。" +# AI Translated msgid "Camera" -msgstr "摄像机" +msgstr "相机" msgid "Touchpad" msgstr "触控板" @@ -10315,8 +10746,9 @@ msgstr "清除我对未保存的项目的选择。" msgid "Unsaved presets" msgstr "未保存的预设" +# AI Translated msgid "Clear my choice on the unsaved presets." -msgstr "清除我对未保存的预置的选择。" +msgstr "清除我对未保存的预设的选择。" msgid "Synchronizing printer preset" msgstr "同步打印机预设" @@ -10338,7 +10770,7 @@ msgid "" msgstr "" "为模型应用平滑法线。\n" "\n" -"需要手动重新加载场景才能生效（在 3D 视图中右键单击 → “全部重新加载”）。" +"需要手动重新加载场景才能生效（在 3D 视图中右键单击 → “重新加载全部”）。" msgid "Phong shading" msgstr "Phong 着色" @@ -10569,15 +11001,17 @@ msgstr "" msgid "Login region" msgstr "登录区域" +# AI Translated msgid "Stealth mode" -msgstr "局域网模式" +msgstr "隐身模式" +# AI Translated msgid "" "This disables all cloud features, including Orca Cloud profile syncing. Users who prefer to work entirely offline can enable this option.\n" "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud." msgstr "" "这将禁用所有云功能，包括 Orca Cloud 配置文件同步。希望完全离线工作的用户可以启用此选项。\n" -"注意：启用局域网模式后，您的用户配置文件将不会备份到 Orca Cloud。" +"注意：启用隐身模式后，您的用户配置文件将不会备份到 Orca Cloud。" msgid "Hide login side panel" msgstr "隐藏登录侧边栏" @@ -10606,8 +11040,9 @@ msgstr "更新和同步" msgid "Check for stable updates only" msgstr "仅检测正式版的更新" +# AI Translated msgid "Auto sync user presets (Printer/Filament/Process)" -msgstr "同步用户预设（打印机/耗材丝/工艺）" +msgstr "自动同步用户预设（打印机/耗材丝/工艺）" msgid "Filament sync mode" msgstr "耗材丝同步模式" @@ -10624,11 +11059,13 @@ msgstr "仅颜色" msgid "Update built-in presets automatically." msgstr "自动更新系统预设" +# AI Translated msgid "Use encrypted file for token storage" -msgstr "使用加密文件进行令牌存储" +msgstr "使用加密文件存储令牌" +# AI Translated msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)" -msgstr "将身份验证令牌存储在加密文件中，而不是系统钥匙串中。 （需要重启）" +msgstr "将身份验证令牌存储在加密文件中，而不是系统钥匙串中。（需要重启）" msgid "Bambu network plug-in" msgstr "Bambu网络插件" @@ -10642,11 +11079,13 @@ msgstr "网络插件版本" msgid "Select the network plug-in version to use" msgstr "选择要使用的网络插件版本" +# AI Translated msgid "Associate" -msgstr "相关的" +msgstr "文件关联" +# AI Translated msgid "Associate files to OrcaSlicer" -msgstr "逆戟鲸切片器文件关联" +msgstr "将文件关联到 OrcaSlicer" msgid "File associations for the Microsoft Store version are managed by Windows Settings." msgstr "Microsoft Store 版本的文件关联由 Windows 设置管理。" @@ -10690,14 +11129,17 @@ msgstr "跳过AMS黑名单检查" msgid "Show unsupported presets" msgstr "显示不受支持的预设" +# AI Translated msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected." -msgstr "在打印机和耗材下拉列表中显示不兼容/不受支持的预设。这些预设无法被选择。" +msgstr "在打印机和耗材丝下拉列表中显示不兼容/不受支持的预设。这些预设无法被选择。" +# AI Translated msgid "Export statistics with G-code" -msgstr "" +msgstr "随 G-code 导出统计信息" +# AI Translated msgid "If enabled, exporting a G-code file also writes its statistics as JSON next to it, as .statistics.json, and an exported sliced 3MF file holds them inside: print time, filament and feature totals, and the same per layer and per object." -msgstr "" +msgstr "启用后，导出 G-code 文件时还会在其旁边以 JSON 格式写入统计信息（.statistics.json），导出的切片 3MF 文件内也会包含这些统计信息：打印时间、耗材丝和各走线类型的总量，以及按层和按对象的相应统计。" # AI Translated msgid "Experimental Features" @@ -10729,12 +11171,13 @@ msgstr "" msgid "Allow Abnormal Storage" msgstr "允许异常存储" +# AI Translated msgid "" "This allows the use of Storage that is marked as abnormal by the Printer.\n" "Use at your own risk, can cause issues!" msgstr "" -"这允许使用被打印机标记为异常的存储。\n" -"使用您自己承担风险，可能会导致问题！" +"允许使用被打印机标记为异常的存储。\n" +"使用风险自负，可能会导致问题！" msgid "Log Level" msgstr "日志级别" @@ -10763,8 +11206,9 @@ msgstr "同步设置" msgid "User sync" msgstr "用户同步" +# AI Translated msgid "Preset sync" -msgstr "配置同步" +msgstr "预设同步" msgid "Preferences sync" msgstr "首选项同步" @@ -10799,17 +11243,21 @@ msgstr "保存" msgid "Save debug settings" msgstr "保存调试设置" +# AI Translated msgid "Debug settings have been saved successfully!" -msgstr "DEBUG模式生效!" +msgstr "调试设置已成功保存！" +# AI Translated msgid "Cloud environment switched; please login again!" -msgstr "切换云环境，请重新登录!" +msgstr "云环境已切换，请重新登录！" +# AI Translated msgid "System presets" -msgstr "系统配置" +msgstr "系统预设" +# AI Translated msgid "User presets" -msgstr "用户配置" +msgstr "用户预设" msgid "Incompatible presets" msgstr "不兼容的预设" @@ -10819,22 +11267,27 @@ msgstr "我的打印机" # AI Translated msgid "AMS filaments" -msgstr "AMS 耗材" +msgstr "AMS 耗材丝" +# AI Translated msgid "Left filaments" -msgstr "左耗材" +msgstr "左耗材丝" +# AI Translated msgid "AMS filament" -msgstr "AMS 打印丝" +msgstr "AMS 耗材丝" +# AI Translated msgid "Right filaments" -msgstr "右耗材" +msgstr "右耗材丝" +# AI Translated msgid "Click to select filament color" -msgstr "点击设置材料颜色" +msgstr "点击选择耗材丝颜色" +# AI Translated msgid "Add/Remove presets" -msgstr "添加/删除配置" +msgstr "添加/删除预设" msgid "Edit preset" msgstr "编辑预设" @@ -10860,8 +11313,9 @@ msgstr "不支持的预设" msgid "Unsupported" msgstr "不支持" +# AI Translated msgid "Add/Remove filament" -msgstr "添加/删除材料" +msgstr "添加/删除耗材丝" msgid "Add/Remove materials" msgstr "添加/删除材料" @@ -10872,8 +11326,9 @@ msgstr "选择/移除打印机（系统预设）" msgid "Create printer" msgstr "创建打印机" +# AI Translated msgid "Incompatible" -msgstr "不兼容的预设" +msgstr "不兼容" msgid "The selected preset is null!" msgstr "选择的预设为空！" @@ -10886,8 +11341,9 @@ msgstr "结束" msgid "Customize" msgstr "自定义" +# AI Translated msgid "Other layer filament sequence" -msgstr "其它层耗材打印顺序" +msgstr "其它层耗材丝打印顺序" msgid "Please input layer value (>= 2)." msgstr "请输入层号（>=2）。" @@ -10898,8 +11354,9 @@ msgstr "到" msgid "Plate name" msgstr "盘名称" +# AI Translated msgid "Same as Global Plate Type" -msgstr "跟随全局打印板类型" +msgstr "跟随全局热床类型" msgid "Bed type" msgstr "热床类型" @@ -10922,8 +11379,9 @@ msgstr "禁用" msgid "Spiral vase" msgstr "旋转花瓶" +# AI Translated msgid "First layer filament sequence" -msgstr "首层耗材打印顺序" +msgstr "首层耗材丝打印顺序" # AI Translated msgid "The filament list contains mixed filaments. Custom filament sequence will not take effect." @@ -10986,11 +11444,11 @@ msgstr "选择要在 3MF 文件中发布的设置" # AI Translated msgid "Mixed filament - published as a whole when \"Enable\" above is selected" -msgstr "混合耗材丝 - 在上方选择“开启”后将整体发布" +msgstr "混合耗材丝：在上方选择“开启”后将整体发布" # AI Translated msgid "Publish this mixed filament and enable + Full Publish its component filaments" -msgstr "发布此混合耗材丝，并开启 + 完整发布其组成耗材丝" +msgstr "发布此混合耗材丝，并对其组成耗材丝勾选“开启”和“完整发布”" # AI Translated msgid "Publish this filament slot in the 3MF file" @@ -11001,8 +11459,9 @@ msgid "Full Publish" msgstr "完整发布" # AI Translated +# Needs human review: Confirm that Full Publish embeds the complete filament preset (all settings). msgid "Embed the entire filament of this slot in the 3MF file" -msgstr "将此槽位的整条耗材丝内嵌到 3MF 文件中" +msgstr "将此槽位的完整耗材丝预设嵌入 3MF 文件" # AI Translated msgid "Filter non-selected" @@ -11068,21 +11527,25 @@ msgctxt "PresetName" msgid "Copy" msgstr "拷贝" +# AI Translated #, boost-format msgid "Printer \"%1%\" is selected with preset \"%2%\"" -msgstr "选中打印机“%1%”和预设“%2%”" +msgstr "打印机“%1%”已选用预设“%2%”" +# AI Translated #, boost-format msgid "Please choose an action with \"%1%\" preset after saving." -msgstr "请选择保存后对%1%预设的操作。" +msgstr "请选择保存后对“%1%”预设执行的操作。" +# AI Translated #, boost-format msgid "For \"%1%\", change \"%2%\" to \"%3%\" " -msgstr "为“%1%，”把“%2%”更换为“%3%” " +msgstr "对于“%1%”，将“%2%”更改为“%3%” " +# AI Translated #, boost-format msgid "For \"%1%\", add \"%2%\" as a new preset" -msgstr "为“%1%”，添加“%2%”为一个新预设" +msgstr "对于“%1%”，将“%2%”添加为新预设" #, boost-format msgid "Simply switch to \"%1%\"" @@ -11309,35 +11772,45 @@ msgstr "不再针对此操作询问" msgid "Task canceled" msgstr "任务已取消" +# AI Translated msgid "Bambu Cool Plate" -msgstr "低温打印板" +msgstr "低温打印热床" +# AI Translated msgid "PLA Plate" -msgstr "PLA打印板" +msgstr "PLA热床" +# AI Translated msgid "Bambu Engineering Plate" -msgstr "工程材料打印板" +msgstr "工程材料热床" +# AI Translated msgid "Bambu Smooth PEI Plate" -msgstr "光面PEI打印板" +msgstr "光滑PEI热床" +# AI Translated msgid "High temperature Plate" -msgstr "高温打印板" +msgstr "高温打印热床" +# AI Translated msgid "Bambu Textured PEI Plate" -msgstr "纹理PEI打印板" +msgstr "纹理PEI热床" +# AI Translated msgid "Bambu Cool Plate SuperTack" -msgstr "Bambu 冷板 SuperTack" +msgstr "低温打印热床（超强粘附）" +# AI Translated msgid "Send print job" -msgstr "发送打印作业" +msgstr "发送打印任务" +# AI Translated msgid "Not satisfied with the grouping of filaments? Regroup and slice ->" -msgstr "对耗材丝的分组不满意？重组并切片 ->" +msgstr "对耗材丝的分组不满意？重新分组并切片 ->" +# AI Translated msgid "Manually change external spool during printing for multi-color printing" -msgstr "在打印过程中手动更换外部线轴以进行多色打印" +msgstr "在打印过程中手动更换外置料盘以进行多色打印" msgid "Multi-color with external" msgstr "多色外置" @@ -11351,15 +11824,17 @@ msgstr "为保证打印质量，打印过程中会适当降低烘干温度。" msgid "Select timelapse storage location" msgstr "选择延时摄影存储位置" +# AI Translated msgid "Auto Bed Leveling" -msgstr "自动床调平" +msgstr "自动热床调平" +# AI Translated msgid "" "This checks the flatness of heatbed. Leveling makes extruded height uniform.\n" "*Automatic mode: Run a leveling check(about 10 seconds). Skip if surface is fine." msgstr "" -"这检查了热床的平整度。调平使挤压高度均匀。\n" -"*自动模式：运行调平检查（约 10 秒）。如果表面良好则跳过。" +"检测热床的平整度。调平可使挤出高度均匀。\n" +"*自动模式：先进行调平检测（约 10 秒）。若表面平整则跳过。" msgid "Flow Dynamics Calibration" msgstr "动态流量校准" @@ -11374,19 +11849,21 @@ msgstr "" msgid "Nozzle Offset Calibration" msgstr "喷嘴偏移校准" +# AI Translated msgid "" "Calibrate nozzle offsets to enhance print quality.\n" "*Automatic mode: Check for calibration before printing. Skip if unnecessary." msgstr "" "校准喷嘴偏移以提高打印质量。\n" -"*自动模式：打印前检查校准情况。如果不需要，请跳过。" +"*自动模式：打印前检查是否需要校准，无需校准则跳过。" +# AI Translated msgid "Shared PA Profile" -msgstr "共享 PA 预设" +msgstr "共享 PA 配置文件" # AI Translated msgid "Nozzles and filaments of the same type share the same PA profile." -msgstr "相同类型的喷嘴和耗材共用同一个 PA 配置。" +msgstr "相同类型的喷嘴和耗材丝共用同一个 PA 配置文件。" msgid "Send complete" msgstr "发送完成" @@ -11454,8 +11931,9 @@ msgstr "所选打印机 (%s) 的型号未知，因此无法验证与打印文件 msgid "When spiral vase mode is enabled, machines with I3 structure will not generate timelapse videos." msgstr "当启用旋转花瓶模式时，I3结构的机器将不会生成延时摄影。" +# AI Translated msgid "The current printer does not support timelapse in Traditional Mode when printing By-Object." -msgstr "当前打印机在按对象打印时不支持传统模式下的延时拍摄。" +msgstr "当前打印机在逐件打印时不支持传统模式延时摄影。" # AI Translated msgid "I have checked the installed nozzle and want to print anyway." @@ -11473,8 +11951,9 @@ msgstr "外部料轴的耗材丝类型设置与切片文件中的耗材丝类型 msgid "The printer type selected when generating G-code is not consistent with the currently selected printer. It is recommended that you use the same printer type for slicing." msgstr "生成G-code时选择的打印机类型与当前选择的打印机不一致。建议您使用相同的打印机类型进行切片。" +# AI Translated msgid "There are some unknown filaments in the AMS mappings. Please check whether they are the required filaments. If they are okay, click \"Confirm\" to start printing." -msgstr "AMS映射中存在一些未知的耗材。请检查它们是否符合预期。如果符合，按“确定”以开始打印任务。" +msgstr "AMS映射中存在一些未知的耗材丝。请检查它们是否符合预期。如果符合，按“确定”以开始打印任务。" msgid "Please check the following:" msgstr "请检查以下内容：" @@ -11485,8 +11964,9 @@ msgstr "请修复上述错误，否则打印无法继续。" msgid "Please click the confirm button if you still want to proceed with printing." msgstr "如果您仍然想继续打印，请单击“确定”按钮。" +# AI Translated msgid "This checks the flatness of heatbed. Leveling makes extruded height uniform." -msgstr "这检查了热床的平整度。调平使挤压高度均匀。" +msgstr "检测热床的平整度。调平可使挤出高度均匀。" msgid "This process determines the dynamic flow values to improve overall print quality." msgstr "该过程确定动态流量值以提高整体打印质量。" @@ -11553,9 +12033,10 @@ msgstr "左侧外置" msgid "nozzle" msgstr "喷嘴" +# AI Translated #, c-format, boost-format msgid "Refreshing information of hotends(%d/%d)." -msgstr "正在刷新喷嘴信息(%d/%d)。" +msgstr "正在刷新热端信息(%d/%d)。" msgid "There are not enough available hotends currently." msgstr "目前可用的热端数量不足。" @@ -11566,8 +12047,9 @@ msgstr "请先进行热端挂架初始化后重试。" msgid "Please refresh the nozzle information and try again." msgstr "请刷新喷嘴信息后重试。" +# AI Translated msgid "Please re-slice to avoid filament waste." -msgstr "请重新切片以避免耗材浪费。" +msgstr "请重新切片以避免耗材丝浪费。" msgid "The reported hotend information may be unreliable." msgstr "报告的热端信息可能不可靠。" @@ -11586,8 +12068,9 @@ msgstr "工具头和热端挂架已满，请卸下至少一个热端后再打印 msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing." msgstr "%s(%s)的喷嘴流量设置与切片文件(%s)不匹配。请确保安装的喷嘴与打印机中的设置相符，然后在切片时设置相应的打印机预设。" +# AI Translated msgid "Tips: If you changed your nozzle of your printer lately, please go to 'Device -> Printer parts' to change your nozzle setting." -msgstr "提示：如果您最近更换了打印机喷嘴，请进入“设备 -> 打印机部件”更改喷嘴设置。" +msgstr "提示：如果您最近更换了打印机喷嘴，请进入“设备 -> 打印机零件”更改喷嘴设置。" #, c-format, boost-format msgid "The %s diameter(%.1fmm) of current printer doesn't match with the slicing file (%.1fmm). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset when slicing." @@ -11615,18 +12098,18 @@ msgstr "当前材料(%s)的硬度超过了 %s(%s)的硬度。这可能会导致 # AI Translated msgid "Some filaments may switch between extruders during printing. Manual K-value calibration cannot be applied throughout the entire print, which may affect print quality. Enabling Flow Dynamics Calibration is recommended." -msgstr "部分耗材在打印过程中可能会在挤出机之间切换。手动 K 值校准无法应用于整个打印过程，这可能会影响打印质量。建议启用动态流量校准。" +msgstr "部分耗材丝在打印过程中可能会在挤出机之间切换。手动 K 值校准无法应用于整个打印过程，这可能会影响打印质量。建议启用动态流量校准。" # AI Translated msgid "There is stringing-prone filament in this file. For best print quality, we recommend switching nozzle clumping detection to Auto mode." -msgstr "此文件中存在易拉丝的耗材。为获得最佳打印质量，我们建议将喷嘴结块检测切换为自动模式。" +msgstr "此文件中存在易拉丝的耗材丝。为获得最佳打印质量，我们建议将裹头检测切换为自动模式。" msgid "Switch" msgstr "切换" # AI Translated msgid "If 'Dynamic Flow Calibration' is set to Auto/On, the system will use the manual calibration value or the default value and skip the flow calibration process. You can perform a manual flow calibration for TPU filament on the 'Calibration' page." -msgstr "如果“动态流量校准”设置为自动/开启，系统将使用手动校准值或默认值，并跳过流量校准过程。您可以在“校准”页面上对 TPU 耗材执行手动流量校准。" +msgstr "如果“动态流量校准”设置为自动/开启，系统将使用手动校准值或默认值，并跳过流量校准过程。您可以在“校准”页面上对 TPU 耗材丝执行手动流量校准。" #, c-format, boost-format msgid "[ %s ] requires printing in a high-temperature environment. Please close the door." @@ -11650,8 +12133,9 @@ msgstr "无法自动匹配合适的耗材丝。请点击手动匹配。" msgid "Install toolhead enhanced cooling fan to prevent filament softening." msgstr "安装工具头增强型冷却风扇以防止耗材丝软化。" +# AI Translated msgid "Smooth Cool Plate" -msgstr "光滑的低温打印床" +msgstr "光滑低温打印热床" msgid "Engineering Plate" msgstr "工程材料热床" @@ -11662,8 +12146,9 @@ msgstr "光滑高温打印热床" msgid "Textured PEI Plate" msgstr "纹理PEI热床" +# AI Translated msgid "Cool Plate (SuperTack)" -msgstr "低温打印板（超强粘附）" +msgstr "低温打印热床（超强粘附）" msgid "Click here if you can't connect to the printer" msgstr "如果无法连接到打印机，请单击此处" @@ -11707,8 +12192,9 @@ msgstr "通过 LAN 打印之前需要插入存储设备。" msgid "Storage is in abnormal state or is in read-only mode." msgstr "存储处于异常状态或处于只读模式。" +# AI Translated msgid "Storage needs to be inserted before printing." -msgstr "打印前需要插入存储。" +msgstr "打印前需要插入存储设备。" msgid "Cannot send the print job to a printer whose firmware must be updated." msgstr "需要更新打印机固件后，才能将打印任务发送到打印机" @@ -11716,8 +12202,9 @@ msgstr "需要更新打印机固件后，才能将打印任务发送到打印机 msgid "Cannot send a print job for an empty plate." msgstr "无法为空盘发送打印任务" +# AI Translated msgid "Storage needs to be inserted to record timelapse." -msgstr "需要插入存储来记录延时摄影。" +msgstr "录制延时摄影需要先插入存储设备。" # AI Translated msgid "The selected printer model could not be identified, so compatibility with the print file configuration cannot be verified. Please verify the printer preset before sending." @@ -11726,8 +12213,9 @@ msgstr "无法识别所选打印机的型号，因此无法验证与打印文件 msgid "You have selected both external and AMS filaments for an extruder. You will need to manually switch the external filament during printing." msgstr "您已为挤出机选择了外部耗材丝和 AMS 耗材丝。您需要在打印过程中手动切换外部耗材丝。" +# AI Translated msgid "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics calibration." -msgstr "TPU 90A/TPU 85A 太软，不支持自动流动动力学校准。" +msgstr "TPU 90A/TPU 85A 太软，不支持自动动态流量校准。" msgid "Set dynamic flow calibration to 'OFF' to enable custom dynamic flow value." msgstr "将动态流量校准设置为“关闭”以启用自定义动态流量值。" @@ -11740,8 +12228,9 @@ msgstr "此打印机类型不支持打印所有盘" msgid "The current firmware supports a maximum of %s materials. You can either reduce the number of materials to %s or fewer on the Preparation Page, or try updating the firmware. If you are still restricted after the update, please wait for subsequent firmware support." msgstr "当前固件最多支持 %s 种材料。您可以在准备页面上将材料数量减少到 %s 种或更少，或尝试更新固件。如果更新后仍受限制，请等待后续固件支持。" +# AI Translated msgid "The type of external filament is unknown or does not match with the filament type in the slicing file. Please make sure you have installed the correct filament in the external spool." -msgstr "外部耗材的类型未知，或与切片文件中的耗材类型不匹配。请确认您已在外部料盘中安装了正确的耗材。" +msgstr "外部耗材丝的类型未知，或与切片文件中的耗材丝类型不匹配。请确认您已在外部料盘中安装了正确的耗材丝。" # AI Translated msgid "TPU 90A/TPU 85A are too soft. It is recommended to perform manual flow calibration on the 'Calibration' page. If 'Dynamic Flow Calibration' is set to auto/on, the system will use the previous calibration value and skip the flow calibration process." @@ -11749,7 +12238,7 @@ msgstr "TPU 90A/TPU 85A 过软。建议在“校准”页面上执行手动流 # AI Translated msgid "The filament in the AMS may be insufficient for this print. Please refill or replace it." -msgstr "AMS 中的耗材可能不足以完成此次打印。请补充或更换耗材。" +msgstr "AMS 中的耗材丝可能不足以完成此次打印。请补充或更换耗材丝。" msgid "Current firmware does not support file transfer to internal storage." msgstr "当前固件不支持文件传输到内部存储器。" @@ -11781,8 +12270,9 @@ msgstr "设备升级中，无法发送打印任务" msgid "The selected printer is incompatible with the chosen printer presets." msgstr "所选打印机与选择的打印机预设不兼容。" +# AI Translated msgid "Storage needs to be inserted before send to printer." -msgstr "在发送到打印机之前需要插入存储。" +msgstr "发送到打印机前需要插入存储设备。" msgid "The printer is required to be on the same LAN as Orca Slicer." msgstr "打印机需要与Orca Slicer在同一个局域网内。" @@ -11803,8 +12293,9 @@ msgstr "文件上传超时。请检查固件版本是否支持此操作或验证 msgid "Sending failed, please try again!" msgstr "发送失败，请重试！" +# AI Translated msgid "Slice complete" -msgstr "切片完成." +msgstr "切片完成" msgid "View all Daily tips" msgstr "查看所有每日贴士" @@ -11827,19 +12318,24 @@ msgstr "从服务器获取票据超时" msgid "Failed to post ticket to server" msgstr "无法将票据发布到服务器" +# AI Translated msgid "Failed to parse login report reason" -msgstr "无法分析登录报告原因" +msgstr "无法解析登录报告原因" msgid "Receive login report timeout" msgstr "接收登录报告超时" +# AI Translated msgid "Unknown Failure" -msgstr "发生错误" +msgstr "未知错误" +# AI Translated msgid "" "Please Find the Pin Code in Account page on printer screen,\n" " and type in the Pin Code below." -msgstr "请在打印机屏幕上的“帐户”页面中找到Pin码，然后在下面输入Pin码。" +msgstr "" +"请在打印机屏幕上的“帐户”页面中找到Pin码，\n" +"然后在下面输入Pin码。" msgid "Can't find Pin Code?" msgstr "无法找到Pin码？" @@ -11847,8 +12343,9 @@ msgstr "无法找到Pin码？" msgid "Pin Code" msgstr "Pin码" +# AI Translated msgid "Binding..." -msgstr "绑定..." +msgstr "正在绑定..." msgid "Please confirm on the printer screen" msgstr "请在打印机屏幕上确认。" @@ -11859,8 +12356,9 @@ msgstr "登录失败，请检查Pin码。" msgid "Log in printer" msgstr "登录打印机" +# AI Translated msgid "Would you like to log in to this printer with the current account?" -msgstr "你想使用当前账号登录这台打印机吗?" +msgstr "是否使用当前账号登录这台打印机？" msgid "Check the reason" msgstr "查看原因" @@ -11899,14 +12397,16 @@ msgstr "登录成功。" msgid "Log out printer" msgstr "登出打印机" +# AI Translated msgid "Would you like to log out the printer?" -msgstr "你想登出打印机吗?" +msgstr "是否登出打印机？" msgid "Please log in first." msgstr "请先登录。" +# AI Translated msgid "There was a problem connecting to the printer. Please try again." -msgstr "连接打印机时发生错误。 请重试。" +msgstr "连接打印机时发生错误。请重试。" msgid "Failed to log out." msgstr "登出失败。" @@ -11937,51 +12437,61 @@ msgstr "带有此图标的参数可以按喷嘴分别设置。" msgid "Click to reset all settings to the last saved preset." msgstr "点击以将所有设置还原到最后一次保存的版本。" +# AI Translated msgid "Prime tower is required for nozzle changing. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" -msgstr "切换喷嘴需要擦料塔，否则打印件上可能会有瑕疵。您确定要关闭擦料塔吗？" +msgstr "切换喷嘴需要擦拭塔，否则打印件上可能会有瑕疵。您确定要关闭擦拭塔吗？" +# AI Translated msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without a prime tower. Are you sure you want to disable the prime tower?" -msgstr "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您确定要关闭擦料塔吗？" +msgstr "平滑模式的延时摄影需要擦拭塔，否则打印件上可能会有瑕疵。您确定要关闭擦拭塔吗？" +# AI Translated msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Are you sure you want to disable prime tower?" -msgstr "结块检测需要一个主塔。没有主塔的模型可能存在缺陷。您确定要禁用主塔吗？" +msgstr "结块检测需要擦拭塔，否则打印件上可能会有瑕疵。您确定要关闭擦拭塔吗？" +# AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable?" -msgstr "同时启用精确Z高度和擦拭塔可能会导致切片错误。您仍然要启用吗？" +msgstr "同时启用精准 Z 高度和擦拭塔可能会导致切片错误。您仍然要启用吗？" +# AI Translated msgid "A prime tower is required for clumping detection. There may be flaws on the model without prime tower. Do you still want to enable clumping detection?" -msgstr "结块检测需要 Prime 塔。没有主塔的模型可能存在缺陷。您仍要启用结块检测吗？" +msgstr "结块检测需要擦拭塔，否则打印件上可能会有瑕疵。您仍要启用结块检测吗？" +# AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors. Do you still want to enable precise Z height?" -msgstr "同时启用精确Z高度和擦拭塔可能会导致切片错误。您仍然要启用精确Z高度吗？" +msgstr "同时启用精准 Z 高度和擦拭塔可能会导致切片错误。您仍然要启用精准 Z 高度吗？" # AI Translated msgid "Smooth timelapse needs a prime tower on every layer, which is not compatible with \"No sparse layers\". \"No sparse layers\" has been turned off." msgstr "平滑模式的延时摄影需要每层都有擦拭塔，因此与“无稀疏层”不兼容。“无稀疏层”已关闭。" +# AI Translated msgid "A prime tower is required for smooth timelapse mode. There may be flaws on the model without prime tower. Do you want to enable the prime tower?" -msgstr "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您想打开擦料塔吗？" +msgstr "平滑模式的延时摄影需要擦拭塔，否则打印件上可能会有瑕疵。是否开启擦拭塔？" # AI Translated msgid "\"No sparse layers\" is not compatible with smooth timelapse, which needs a prime tower on every layer. Timelapse has been switched to traditional mode." msgstr "“无稀疏层”与平滑模式的延时摄影不兼容，后者需要每层都有擦拭塔。延时摄影已切换为传统模式。" +# AI Translated msgid "Still print by object?" -msgstr "仍然按对象打印吗？" +msgstr "仍要逐件打印吗？" +# AI Translated msgid "" "Non-soluble support materials are not recommended for support base.\n" "Are you sure to use them for support base?\n" msgstr "" -"不建议使用非溶性支撑材料作为支撑基底。\n" -"您确定使用它们作为支持基础吗？\n" +"不建议使用非可溶支撑材料作为支撑主体。\n" +"您确定要将其用于支撑主体吗？\n" +# AI Translated msgid "" "When using support material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern and disable independent support layer height." msgstr "" -"当使用支撑材料作为支撑接触面时，我们推荐以下设置：\n" -"0顶部Z距离，0接触面间距，交错线性图案并禁用支撑独立层高" +"当支撑面使用支撑材料时，我们推荐以下设置：\n" +"顶部Z距离为0、顶部支撑面线距为0、交叠的直线图案，并禁用支撑独立层高。" msgid "" "Change these settings automatically?\n" @@ -11992,14 +12502,15 @@ msgstr "" "是 - 自动调整这些设置\n" "否 - 不用为我调整这些设置" +# AI Translated msgid "" "When using soluble material for the support interface, we recommend the following settings:\n" "0 top Z distance, 0 interface spacing, interlaced rectilinear pattern, disable independent support layer height\n" "and use soluble materials for both support interface and support base." msgstr "" -"当支撑界面使用可溶材料时，我们建议进行以下设置：\n" -"0 顶部 Z 距离、0 接口间距、交错直线图案、禁用独立支撑层高度\n" -"支撑界面和支撑底座均采用可溶性材料。" +"当支撑面使用可溶材料时，我们推荐以下设置：\n" +"顶部Z距离为0、顶部支撑面线距为0、交叠的直线图案、禁用支撑独立层高，\n" +"并且支撑面和支撑主体均使用可溶材料。" msgid "Enabling this option will modify the model's shape. If your print requires precise dimensions or is part of an assembly, it's important to double-check whether this change in geometry impacts the functionality of your print." msgstr "启用此选项将改变模型的形状。如果您的打印件需要精确的尺寸或是装配体的一部分，请务必仔细检查这种形状的变化是否影响了最终功能。" @@ -12007,8 +12518,9 @@ msgstr "启用此选项将改变模型的形状。如果您的打印件需要精 msgid "Are you sure you want to enable this option?" msgstr "您确定要启用此选项吗？" +# AI Translated msgid "Infill patterns are typically designed to handle rotation automatically to ensure proper printing and achieve their intended effects (e.g., Gyroid, Cubic). Rotating the current sparse infill pattern may lead to insufficient support. Please proceed with caution and thoroughly check for any potential printing issues. Are you sure you want to enable this option?" -msgstr "填充图案通常设计为自动处理旋转，以确保正确打印并实现其预期效果（例如，Gyroid、Cubic）。旋转当前的稀疏填充图案可能会导致支撑不足。请谨慎操作并彻底检查是否存在任何潜在的打印问题。您确定要启用此选项吗？" +msgstr "填充图案通常设计为自动处理旋转，以确保正确打印并实现其预期效果（例如螺旋体、立方体）。旋转当前的稀疏填充图案可能会导致支撑不足。请谨慎操作并彻底检查是否存在任何潜在的打印问题。您确定要启用此选项吗？" msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications." msgstr "实验性选项。在更换耗材丝时，将耗材丝回抽一段距离后再切断以最小化冲刷。虽然这可以显著减少冲刷，但也可能增加喷嘴堵塞或其他打印问题的风险。" @@ -12016,12 +12528,14 @@ msgstr "实验性选项。在更换耗材丝时，将耗材丝回抽一段距离 msgid "Experimental feature: Retracting and cutting off the filament at a greater distance during filament changes to minimize flush. Although it can notably reduce flush, it may also elevate the risk of nozzle clogs or other printing complications. Please use with the latest printer firmware." msgstr "实验性选项。在更换耗材丝时，将耗材丝回抽一段距离后再切断以最小化冲刷。虽然这可以显著减少冲刷，但也可能增加喷嘴堵塞或其他打印问题的风险。请配合打印机最新固件使用。" +# AI Translated +# Needs human review: The menu item named here does not exist (see source notes). msgid "" "When recording timelapse without toolhead, it is recommended to add a \"Timelapse Wipe Tower\" \n" "by right-click the empty position of build plate and choose \"Add Primitive\"->\"Timelapse Wipe Tower\"." msgstr "" -"在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n" -"右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。" +"在录制无工具头延时摄影视频时，建议添加“延时摄影擦拭塔”：\n" +"右键单击热床空白处，选择“添加标准模型”->“延时摄影擦拭塔”。" msgid "A copy of the current system preset will be created, which will be detached from the system preset." msgstr "将创建当前系统预设的副本，该副本将与系统预设分离。" @@ -12029,15 +12543,17 @@ msgstr "将创建当前系统预设的副本，该副本将与系统预设分离 msgid "The current custom preset will be detached from the parent system preset." msgstr "当前自定义预设将与父系统预设分离。" +# AI Translated msgid "Modifications to the current profile will be saved." -msgstr "将保存对当前配置文件的修改。" +msgstr "将保存对当前预设的修改。" +# AI Translated msgid "" "This action is not revertible.\n" "Do you want to proceed?" msgstr "" -"此操作不可恢复。\n" -"你想继续吗？" +"此操作不可撤销。\n" +"是否继续？" msgid "Detach preset" msgstr "分离预设" @@ -12057,8 +12573,9 @@ msgstr "当前预设继承自" msgid "It can't be deleted or modified." msgstr "无法删除或修改它。" +# AI Translated msgid "Any modifications should be saved as a new preset inherited from this one." -msgstr "任何修改都应保存为从此修改继承的新预设。" +msgstr "任何修改都应保存为继承自此预设的新预设。" msgid "To do that please specify a new name for the preset." msgstr "为此，请为预设指定新名称。" @@ -12077,23 +12594,29 @@ msgstr "版本" msgid "printer model" msgstr "打印机型号" +# AI Translated msgid "default print profile" -msgstr "默认打印配置文件" +msgstr "默认工艺预设" +# AI Translated msgid "default filament profile" -msgstr "默认耗材丝配置" +msgstr "默认耗材丝预设" +# AI Translated msgid "default SLA material profile" -msgstr "默认 SLA 材料配置文件" +msgstr "默认 SLA 材料预设" +# AI Translated msgid "default SLA print profile" -msgstr "默认 SLA 打印配置文件" +msgstr "默认 SLA 打印预设" +# AI Translated msgid "full profile name" -msgstr "配置全称" +msgstr "预设全称" +# AI Translated msgid "symbolic profile name" -msgstr "配置名昵称" +msgstr "预设别名" msgid "Line width" msgstr "线宽" @@ -12107,8 +12630,9 @@ msgstr "Z 层抗锯齿" msgid "Wall generator" msgstr "墙生成器" +# AI Translated msgid "Walls and surfaces" -msgstr "墙壁和表面" +msgstr "墙和表面" msgid "Bridging" msgstr "搭桥" @@ -12128,8 +12652,9 @@ msgstr "其他层速度" msgid "Overhang speed" msgstr "悬垂速度" +# AI Translated msgid "This is the speed for various overhang degrees. Overhang degrees are expressed as a percentage of line width. 0 speed means no slowing down for the overhang degree range and wall speed is used" -msgstr "不同悬垂程度的打印速度。悬垂程度使用相对于线宽的百分表示。速度为0代表这个悬垂程度范围内不降速，直接使用墙的速度" +msgstr "不同悬垂程度的打印速度。悬垂程度以线宽的百分比表示。速度为0代表这个悬垂程度范围内不降速，直接使用墙的速度" msgid "Set speed for external and internal bridges" msgstr "设置外部和内部桥接的速度" @@ -12146,8 +12671,9 @@ msgstr "抖动（XY轴）" msgid "Raft" msgstr "筏层" +# AI Translated msgid "Filament for Supports" -msgstr "支撑耗材" +msgstr "支撑耗材丝" msgid "Support ironing" msgstr "支撑熨烫" @@ -12155,14 +12681,17 @@ msgstr "支撑熨烫" msgid "Tree supports" msgstr "树状支撑" +# AI Translated msgid "Multimaterial" -msgstr "材料" +msgstr "多材料" +# AI Translated msgid "Filament for Features" -msgstr "特征用耗材" +msgstr "特征用耗材丝" +# AI Translated msgid "Ooze prevention" -msgstr "Ooze 预防" +msgstr "防渗料" msgid "Others" msgstr "其他" @@ -12225,18 +12754,21 @@ msgstr "建议喷嘴温度" msgid "Recommended nozzle temperature range of this filament. 0 means not set" msgstr "该材料的建议喷嘴温度范围。0表示未设置" +# AI Translated msgid "Flow ratio and Pressure Advance" -msgstr "流量和 Pressure Advance" +msgstr "流量比例和 Pressure Advance" +# AI Translated msgid "Print chamber temperature" -msgstr "打印仓温度" +msgstr "打印腔体温度" +# AI Translated msgid "Chamber temperature" -msgstr "机箱温度" +msgstr "腔体温度" # AI Translated msgid "Target chamber temperature, and the minimal chamber temperature at which printing should start" -msgstr "目标机箱温度，以及开始打印时的最低机箱温度" +msgstr "目标腔体温度，以及开始打印时的最低腔体温度" # AI Translated msgid "Target" @@ -12252,8 +12784,9 @@ msgstr "打印温度" msgid "Nozzle temperature when printing" msgstr "打印时的喷嘴温度" +# AI Translated msgid "Bed temperature when the Cool Plate SuperTack is installed. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." -msgstr "安装低温打印板（超强粘附）时的热床温度。0值表示该材料不支持在低温打印板（超强粘附）上打印。" +msgstr "安装低温打印热床（超强粘附）时的热床温度。0值表示这个耗材丝不支持低温打印热床（超强粘附）。" msgid "Cool Plate" msgstr "低温打印热床" @@ -12261,8 +12794,9 @@ msgstr "低温打印热床" msgid "This is the bed temperature when the Cool Plate is installed. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "安装低温打印热床时的热床温度。0值表示这个耗材丝不支持低温打印热床" +# AI Translated msgid "Textured Cool Plate" -msgstr "纹理的低温打印床" +msgstr "纹理低温打印热床" msgid "This is the bed temperature when the Textured Cool Plate is installed. A value of 0 means the filament does not support printing on the Textured Cool Plate." msgstr "安装纹理低温打印热床时的热床温度。0值表示这个耗材丝不支持纹理低温打印热床" @@ -12270,11 +12804,13 @@ msgstr "安装纹理低温打印热床时的热床温度。0值表示这个耗 msgid "This is the bed temperature when the engineering plate is installed. A value of 0 means the filament does not support printing on the Engineering Plate." msgstr "安装工程材料热床时的热床温度。0值表示这个耗材丝不支持工程材料热床" +# AI Translated msgid "Smooth PEI Plate / High Temp Plate" -msgstr "光滑PEI板/高温板" +msgstr "光滑PEI热床/高温打印热床" +# AI Translated msgid "This is the bed temperature when the Smooth PEI Plate/High Temperature Plate is installed. A value of 0 means the filament does not support printing on the Smooth PEI Plate/High Temp Plate." -msgstr "使用光滑PEI热床或高温打印热床时的床温。值0表示耗材不支持在光滑PEI热床或高温打印热床上打印" +msgstr "安装光滑PEI热床/高温打印热床时的热床温度。0值表示这个耗材丝不支持光滑PEI热床/高温打印热床。" msgid "This is the bed temperature when the Textured PEI Plate is installed. A value of 0 means the filament does not support printing on the Textured PEI Plate." msgstr "安装纹理PEI热床时的热床温度。0值表示这个耗材丝不支持纹理PEI热床" @@ -12310,8 +12846,9 @@ msgstr "排气风扇" msgid "During print" msgstr "打印中" +# AI Translated msgid "Complete print" -msgstr "完成打印" +msgstr "打印完成后" msgid "Filament start G-code" msgstr "耗材丝起始G-code" @@ -12322,8 +12859,9 @@ msgstr "耗材丝结束G-code" msgid "Wipe tower parameters" msgstr "擦拭塔参数" +# AI Translated msgid "Multi Filament" -msgstr "复丝" +msgstr "多耗材丝" msgid "Tool change parameters with single extruder MM printers" msgstr "单挤出机多材料打印机的换色参数" @@ -12340,14 +12878,16 @@ msgstr "依赖" msgid "Compatible printers" msgstr "兼容打印机" +# AI Translated msgid "Compatible process profiles" -msgstr "兼容的切片配置" +msgstr "兼容的工艺预设" msgid "Printable space" msgstr "可打印区域" +# AI Translated msgid "Select the network agent implementation for printer communication. Available agents are registered at startup." -msgstr "为打印机通信选择网络代理。可用的代理将在启动时列出。" +msgstr "为打印机通信选择网络代理实现。可用的代理在启动时注册。" # AI Translated msgid "Belt printer" @@ -12450,20 +12990,22 @@ msgstr "加速度限制" msgid "Jerk limitation" msgstr "抖动限制" +# AI Translated msgid "Single extruder multi-material setup" -msgstr "设置单挤出机多材料" +msgstr "单挤出机多材料设置" msgid "Number of extruders of the printer." msgstr "打印机的挤出机数。" +# AI Translated msgid "" "Single Extruder Multi Material is selected,\n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder nozzle diameter value?" msgstr "" -"选择单挤出机多材料,\n" -"和所有挤出机必须具有相同的直径。\n" -"是否要将所有挤出机的直径更改为第一挤出机喷嘴直径值？" +"已选择单挤出机多材料，\n" +"所有挤出机必须具有相同的直径。\n" +"是否将所有挤出机的直径更改为第一个挤出机的喷嘴直径？" msgid "Nozzle diameter" msgstr "喷嘴直径" @@ -12531,8 +13073,9 @@ msgstr "" msgid "Firmware Retraction" msgstr "固件回抽" +# AI Translated msgid "Switching to a printer with different extruder types or numbers will discard or reset changes to extruder or multi-nozzle-related parameters." -msgstr "切换到具有不同挤出机类型或编号的打印机将放弃或重置对挤出机或多喷嘴相关参数的更改。" +msgstr "切换到挤出机类型或数量不同的打印机，将放弃或重置对挤出机或多喷嘴相关参数的修改。" msgid "Use Modified Value" msgstr "使用修改值" @@ -12550,7 +13093,7 @@ msgstr "该打印机下已关联 %1% 与 %2%。如删除该打印机，这些预 #, c-format, boost-format msgid "%d filament preset" msgid_plural "%d filament presets" -msgstr[0] "%d 个耗材预设" +msgstr[0] "%d 个耗材丝预设" # AI Translated #, c-format, boost-format @@ -12569,16 +13112,18 @@ msgstr[0] "以下预设继承此预设。" msgid "Delete Preset" msgstr "删除预设" +# AI Translated msgid "The following preset will be deleted too:" msgid_plural "The following presets will be deleted too:" -msgstr[0] "下列预设将被一起删除。" +msgstr[0] "以下预设也将被删除：" +# AI Translated msgid "" "Are you sure to delete the selected preset?\n" "If the preset corresponds to a filament currently in use on your printer, please reset the filament information for that slot." msgstr "" -"确定要删除所选预设吗？\n" -"如果预设对应当前在您的打印机上使用的材料，请重新设置该槽位的材料信息。" +"您确定要删除所选预设吗？\n" +"如果该预设对应打印机上当前正在使用的耗材丝，请重新设置该槽位的耗材丝信息。" # AI Translated msgid "Are you sure you want to delete the selected preset?" @@ -12587,8 +13132,9 @@ msgstr "确定要删除所选预设吗？" msgid "Select printers" msgstr "选择打印机" +# AI Translated msgid "Select profiles" -msgstr "选择配置文件" +msgstr "选择预设" #, c-format, boost-format msgid "" @@ -12700,8 +13246,9 @@ msgstr "工艺设置" msgid "unsaved changes" msgstr "未保存的更改" +# AI Translated msgid "Transfer or discard changes" -msgstr "放弃或保留更改" +msgstr "迁移或放弃更改" msgid "Old Value" msgstr "旧值" @@ -12718,8 +13265,9 @@ msgstr "不保存" msgid "Discard" msgstr "放弃" +# AI Translated msgid "the new profile" -msgstr "新的配置文件" +msgstr "新预设" #, boost-format msgid "" @@ -12733,6 +13281,7 @@ msgstr "" "并放弃在\n" "“%2%”中所做的任何更改。" +# AI Translated #, boost-format msgid "" "All \"New Value\" settings modified in\n" @@ -12742,7 +13291,7 @@ msgid "" msgstr "" "在\n" "“%1%”中修改的所有“新值”设置\n" -"将被转移到\n" +"将被迁移到\n" "“%2%”。" #, boost-format @@ -12773,25 +13322,28 @@ msgstr "保持所选项。" msgid "Transfer the selected options to the newly selected preset." msgstr "将所选项迁移到新的预设中。" +# AI Translated #, boost-format msgid "" "Save the selected options to preset \n" "\"%1%\"." msgstr "" -"保存所选选项到预设 \n" -"\"%1%\"." +"将所选选项保存到预设 \n" +"“%1%”。" +# AI Translated #, boost-format msgid "" "Transfer the selected options to the newly selected preset \n" "\"%1%\"." msgstr "" -"将选择的选项转移到新选择的预设 \n" -"\"%1%\"." +"将所选选项迁移到新选择的预设 \n" +"“%1%”。" +# AI Translated #, boost-format msgid "Preset \"%1%\" contains the following unsaved changes:" -msgstr "预设 \"%1%\" 包含以下未保存的修改:" +msgstr "预设“%1%”包含以下未保存的修改：" #, boost-format msgid "Preset \"%1%\" is not compatible with the new printer profile and it contains the following unsaved changes:" @@ -12812,28 +13364,31 @@ msgstr "" "\n" "您可以保存或丢弃已经修改的预设值。" +# AI Translated msgid "" "\n" "You can save or discard the preset values you have modified, or choose to transfer the values you have modified to the new preset." msgstr "" "\n" -"您可以保存或放弃已修改的预设值，或选择将已修改的值传输到新预设。" +"您可以保存或放弃已修改的预设值，或选择将已修改的值迁移到新预设。" msgid "You have previously modified your settings." msgstr "您已经修改了预设参数。" +# AI Translated msgid "" "\n" "You can discard the preset values you have modified, or choose to transfer the modified values to the new project" msgstr "" "\n" -"您可以放弃已修改的预设值，或者将修改后的值转移到新项目" +"您可以放弃已修改的预设值，或者将修改后的值迁移到新项目" msgid "Extruder count" msgstr "挤出机数量" +# AI Translated msgid "Capabilities" -msgstr "能力" +msgstr "功能" msgid "Show all presets (including incompatible)" msgstr "显示所有预设(包括不兼容的)" @@ -12847,21 +13402,25 @@ msgstr "左侧预设值" msgid "Right Preset Value" msgstr "右侧预设值" +# AI Translated msgid "You can only transfer to current active profile because it has been modified." -msgstr "只能传输到当前活动的配置文件，因为它已被修改。" +msgstr "只能迁移到当前使用的预设，因为它已被修改。" +# AI Translated msgid "" "Transfer the selected options from left preset to the right.\n" "Note: New modified presets will be selected in settings tabs after close this dialog." msgstr "" -"将选定的选项从左边的预设转移到右边。\n" -"注意：关闭此对话框后，新修改的预置将在设置标签中被选中。" +"将所选选项从左侧预设迁移到右侧。\n" +"注意：关闭此对话框后，设置标签页中将选中新修改的预设。" +# AI Translated msgid "Transfer values from left to right" -msgstr "从左到右的转移值" +msgstr "从左向右迁移数值" +# AI Translated msgid "If enabled, this dialog can be used for transfer selected values from left to right preset." -msgstr "如果启用，此对话框可用于将选定的值从左侧预设传输到右侧预设。" +msgstr "启用后，可使用此对话框将所选值从左侧预设迁移到右侧预设。" # AI Translated msgid "One of the presets does not exist" @@ -12937,19 +13496,21 @@ msgstr "发现新版本" msgid "Configuration update" msgstr "配置更新" +# AI Translated msgid "A new configuration package is available. Do you want to install it?" -msgstr "新的配置包可用，您需要安装吗？" +msgstr "有新的配置包可用。是否安装？" msgid "the configuration package is incompatible with the current application." msgstr "配置包和当前的应用程序不兼容。" +# AI Translated #, c-format, boost-format msgid "" "The configuration package is incompatible with the current application.\n" "%s will update the configuration package to allow the application to start." msgstr "" "配置包和当前的应用程序不兼容。\n" -"%s会更新配置包，否则无法正常启动" +"%s 将更新配置包，以便应用程序能够启动。" #, c-format, boost-format msgid "Exit %s" @@ -12975,21 +13536,24 @@ msgctxt "Sync_AMS" msgid "Original" msgstr "原来的" +# AI Translated msgid "After mapping" -msgstr "测绘后" +msgstr "映射后" msgid "After overwriting" msgstr "覆盖后" +# AI Translated msgctxt "Sync_AMS" msgid "Plate" -msgstr "盘子" +msgstr "盘" msgid "The connected printer does not match the currently selected printer. Please change the selected printer." msgstr "连接的打印机与当前选择的打印机不匹配。请更改所选打印机。" +# AI Translated msgid "Mapping" -msgstr "测绘" +msgstr "映射" msgid "Overwriting" msgstr "覆盖" @@ -13003,11 +13567,12 @@ msgstr "（推荐耗材丝）" msgid "Advanced Options" msgstr "高级选项" +# AI Translated msgid "" "Check heatbed flatness. Leveling makes extruded height uniform.\n" "*Automatic mode: Level first (about 10 seconds). Skip if surface is fine." msgstr "" -"检查热床平整度。调平使挤压高度均匀。\n" +"检查热床平整度。调平使挤出高度均匀。\n" "*自动模式：首先调平（约 10 秒）。如果表面良好则跳过。" msgid "" @@ -13023,11 +13588,13 @@ msgstr "使用AMS" msgid "Tip" msgstr "提示" +# AI Translated msgid "Only synchronize filament type and color, not including AMS slot information." -msgstr "仅同步耗材丝类型和颜色，不包括 AMS 插槽信息。" +msgstr "仅同步耗材丝类型和颜色，不包括 AMS 槽位信息。" +# AI Translated msgid "Replace the project filaments list sequentially based on printer filaments. And unused printer filaments will be automatically added to the end of the list." -msgstr "根据打印机耗材顺序替换项目耗材列表。未使用的打印机耗材将自动添加到列表末尾。" +msgstr "根据打印机耗材丝顺序替换项目耗材丝列表。未使用的打印机耗材丝将自动添加到列表末尾。" msgid "Add unused AMS filaments to filaments list." msgstr "将未使用的 AMS 耗材丝添加到耗材丝列表中。" @@ -13035,11 +13602,13 @@ msgstr "将未使用的 AMS 耗材丝添加到耗材丝列表中。" msgid "Automatically merge the same colors in the model after mapping." msgstr "映射后自动合并模型中的相同颜色。" +# AI Translated msgid "After being synced, this action cannot be undone." -msgstr "同步后，此操作无法撤消。" +msgstr "同步后，此操作无法撤销。" +# AI Translated msgid "After being synced, the project's filament presets and colors will be replaced with the mapped filament types and colors. This action cannot be undone." -msgstr "同步后，项目的耗材丝预设和颜色将替换为映射的耗材丝类型和颜色。此操作无法撤消。" +msgstr "同步后，项目的耗材丝预设和颜色将替换为映射的耗材丝类型和颜色。此操作无法撤销。" msgid "Are you sure to synchronize the filaments?" msgstr "您确定要同步耗材丝吗？" @@ -13053,8 +13622,9 @@ msgstr "同步耗材丝信息" msgid "Add unused filaments to filaments list." msgstr "将未使用的耗材丝添加到耗材丝列表中。" +# AI Translated msgid "Only synchronize filament type and color, not including slot information." -msgstr "仅同步耗材丝类型和颜色，不包括插槽信息。" +msgstr "仅同步耗材丝类型和颜色，不包括槽位信息。" msgid "Ext spool" msgstr "外置耗材盘" @@ -13072,8 +13642,9 @@ msgstr "所选打印机（%s）与切片软件中选择的打印机配置文件 msgid "Timelapse is not supported because Print sequence is set to \"By object\"." msgstr "切片参数中开启了逐件打印，无法支持延时摄影。" +# AI Translated msgid "You selected external and AMS filament at the same time in an extruder, you will need manually change external filament." -msgstr "您在挤出机中同时选择了外部耗材和 AMS 耗材，您将需要手动更换外部耗材。" +msgstr "您在挤出机中同时选择了外部耗材丝和 AMS 耗材丝，您将需要手动更换外部耗材丝。" msgid "Successfully synchronized nozzle information." msgstr "成功同步喷嘴信息。" @@ -13083,13 +13654,14 @@ msgstr "已成功同步喷嘴和 AMS 编号信息。" # AI Translated msgid "Do you want to continue to sync filaments?" -msgstr "是否继续同步耗材？" +msgstr "是否继续同步耗材丝？" msgid "Successfully synchronized filament color from printer." msgstr "已成功同步打印机的耗材丝颜色。" +# AI Translated msgid "Successfully synchronized color and type of filament from printer." -msgstr "成功同步打印机耗材的颜色和类型。" +msgstr "成功同步打印机耗材丝的颜色和类型。" msgctxt "FinishSyncAms" msgid "OK" @@ -13098,15 +13670,15 @@ msgstr "好的" msgid "Ramming customization" msgstr "自定义尖端成型" +# AI Translated msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-extruder MM printer. Its purpose is to properly shape the end of the unloaded filament so it does not prevent insertion of the new filament and can itself be reinserted later. This phase is important and different materials can require different extrusion speeds to get the good shape. For this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to jams, extruder wheel grinding into filament etc." msgstr "" -"尖端成型是指在单挤出机多材料打印机中换色之前的快速抽插。\n" -"其目的是使卸载耗材的末端正确成形，这样就不会妨碍新耗材的插入，并使之可以重新插入。\n" -"这个阶段很重要，不同的材料可能需要不同的挤出速度才能获得良好的形状。因此，尖端成型过程中的挤压率是需要可调节的。\n" -"这是一个专家级别的设置，不正确的调节可能会导致堵塞、挤出机齿轮刨料等。" +"尖端成型是指单挤出机多材料打印机在换料前进行的快速挤出，其目的是使退出的耗材丝末端形成合适的形状，既不妨碍新耗材丝的插入，自身之后也能重新插入。这一阶段很重要，不同材料可能需要不同的挤出速度才能获得良好的形状，因此尖端成型过程中的挤出速率可以调节。\n" +"\n" +"这是专家级设置，调整不当很可能导致堵塞、挤出机齿轮磨损耗材丝等问题。" #, boost-format msgid "For constant flow rate, hold %1% while dragging." @@ -13115,14 +13687,17 @@ msgstr "为保持恒定流量，拖动时按住%1%" msgid "ms" msgstr "ms" +# AI Translated msgid "Total ramming" -msgstr "总冲刷量" +msgstr "尖端成型总计" +# AI Translated msgid "Ramming line" -msgstr "预冲刷线" +msgstr "尖端成型线条" +# AI Translated msgid "Orca would re-calculate your flushing volumes everytime the filaments color changed or filaments changed. You could disable the auto-calculate in Orca Slicer > Preferences" -msgstr "每次耗材颜色发生变化或耗材发生变化时，Orca 都会重新计算您的冲洗量。您可以在 Orca Slicer > 首选项中禁用自动计算" +msgstr "每次耗材丝颜色或耗材丝发生变化时，Orca 都会重新计算冲刷量。您可以在 Orca Slicer > 偏好设置 中禁用自动计算" msgid "Flushing volume (mm³) for each filament pair." msgstr "在两个耗材丝间切换所需的冲刷量（mm³）" @@ -13243,8 +13818,9 @@ msgstr "自建耗材丝" msgid "Create New" msgstr "新建" +# AI Translated msgid "Filament type" -msgstr "耗材类型" +msgstr "耗材丝类型" msgid "Vendor" msgstr "供应商" @@ -13275,18 +13851,20 @@ msgstr "清空" msgid "At least one filament must be selected." msgstr "至少要选择一款耗材丝。" +# AI Translated msgid "Do you want to use the default filament?" -msgstr "你希望使用默认的耗材丝列表吗？" +msgstr "是否使用默认耗材丝？" msgid "This disables all cloud features, including Orca Cloud profile syncing. Users who prefer to work entirely offline can enable this option." msgstr "这将禁用所有云功能，包括 Orca Cloud 配置文件同步。希望完全离线工作的用户可以启用此选项。" +# AI Translated msgid "Note: When Stealth Mode is enabled, your user profiles will not be backed up to Orca Cloud." -msgstr "注意：启用局域网模式后，您的用户配置文件将不会备份到 Orca Cloud。" +msgstr "注意：启用隐身模式后，您的用户配置文件将不会备份到 Orca Cloud。" # AI Translated msgid "Enable Stealth Mode." -msgstr "启用局域网模式。" +msgstr "启用隐身模式。" # AI Translated msgid "Proprietary Plugins" @@ -13371,8 +13949,9 @@ msgstr "在“准备”标签页的 3D 视图获得焦点时可用。" msgid "Select a part" msgstr "选择单个零件" +# AI Translated msgid "Select objects by rectangle" -msgstr "框选多个零件" +msgstr "框选对象" msgid "Keyboard 1-9: set filament for object/part" msgstr "按键1-9：设置对象/零件的耗材丝" @@ -13401,13 +13980,14 @@ msgstr "绘制" # AI Translated msgid "Available while a painting gizmo is open: supports, seam, fuzzy skin or color painting." -msgstr "在绘制小工具打开时可用：支撑、接缝、绒毛表面或颜色绘制。" +msgstr "在绘制小工具打开时可用：支撑、接缝、绒毛表面或涂色。" msgid "Move: press to snap by 1mm" msgstr "移动：以1mm为步进移动" +# AI Translated msgid "Support/Color Painting: adjust pen radius" -msgstr "支撑/颜色绘制：调节画笔半径" +msgstr "支撑/涂色：调节画笔半径" msgid "Objects list" msgstr "对象列表" @@ -13424,8 +14004,9 @@ msgctxt "Keyboard Shortcut" msgid "Space" msgstr "Space" +# AI Translated msgid "Select the object/part and press space to change the name" -msgstr "选中对象、零件，按空格可修改名称" +msgstr "选中对象、零件，按 Space 键可修改名称" msgid "Mouse click" msgstr "鼠标点击" @@ -13515,9 +14096,10 @@ msgstr "点击“确定”立即更新网络插件。如果某个文件正在使 msgid "A new Network plug-in is available. Do you want to install it?" msgstr "有新的网络插件可用。是否要安装？" +# AI Translated #, c-format, boost-format msgid "A new Network plug-in (%s) is available. Do you want to install it?" -msgstr "新的网络插件(%s) 可用，您是否需要安装它？" +msgstr "有新的网络插件（%s）可用。是否要安装？" msgid "New version of Orca Slicer" msgstr "新版本的Orca Slicer" @@ -13541,8 +14123,9 @@ msgstr "有新版本可用：%s。请从 Microsoft Store 更新 OrcaSlicer。" msgid "Confirm and Update Nozzle" msgstr "确认并更新喷嘴" +# AI Translated msgid "Connect the printer using IP and access code" -msgstr "使用IP和访问代码连接打印" +msgstr "使用IP和访问码连接打印机" msgid "Try the following methods to update the connection parameters and reconnect to the printer." msgstr "请尝试以下方法更新连接参数并重新连接打印机。" @@ -13550,11 +14133,13 @@ msgstr "请尝试以下方法更新连接参数并重新连接打印机。" msgid "1. Please confirm Orca Slicer and your printer are in the same LAN." msgstr "1. 请确认 Orca Slicer 和您的打印机位于同一局域网内。" +# AI Translated msgid "2. If the IP and Access Code below are different from the actual values on your printer, please correct them." -msgstr "2. 如果下面的 IP 和访问代码与您打印机上的实际值不同，请更正它们。" +msgstr "2. 如果下面的 IP 和访问码与您打印机上的实际值不同，请更正它们。" +# AI Translated msgid "3. Please obtain the device SN from the printer side; it is usually found in the device information on the printer screen." -msgstr "3、请从打印机端获取设备 SN；它通常可以在打印机屏幕上的设备信息中找到。" +msgstr "3. 请从打印机端获取设备 SN；它通常可以在打印机屏幕上的设备信息中找到。" msgid "IP" msgstr "IP地址" @@ -13578,14 +14163,16 @@ msgstr "HTTPS CA文件是可选的。只有在使用自签名证书进行HTTPS msgid "This system uses HTTPS certificates from the system Certificate Store or Keychain. To use a custom CA file, import it there." msgstr "此系统使用来自系统证书存储或钥匙串的 HTTPS 证书。要使用自定义 CA 文件，请将其导入其中。" +# AI Translated msgid "Printer model" -msgstr "打印机模型" +msgstr "打印机型号" msgid "Printer name" msgstr "打印机名称" +# AI Translated msgid "Where to find your printer's IP and Access Code?" -msgstr "在哪里可以找到打印机的IP和访问码?" +msgstr "在哪里可以找到打印机的IP和访问码？" # AI Translated msgid "How to trouble shooting" @@ -13597,8 +14184,9 @@ msgstr "连接" msgid "Manual Setup" msgstr "手动设置" +# AI Translated msgid "IP and Access Code Verified! You may close the window" -msgstr "IP 和访问代码已验证！您可以关闭窗口" +msgstr "IP 和访问码已验证！您可以关闭窗口" msgid "connecting..." msgstr "连接中..." @@ -13612,8 +14200,9 @@ msgstr "发布登录请求失败" msgid "The printer has already been bound." msgstr "打印机已绑定。" +# AI Translated msgid "The printer mode is incorrect, please switch to LAN Only." -msgstr "打印机模式不正确，请切换到仅局域网。" +msgstr "打印机模式不正确，请切换到仅局域网模式。" msgid "Connecting to printer... The dialog will close later" msgstr "连接打印机中… 对话框稍后将自动关闭。" @@ -13665,7 +14254,7 @@ msgstr "自动灭火系统" # AI Translated msgid "Filament Track Switch" -msgstr "Filament Track Switch" +msgstr "耗材变轨器" msgid "Beta" msgstr "测试版" @@ -13691,12 +14280,13 @@ msgstr "热端&挂架" msgid "Are you sure you want to update? This will take about 10 minutes. Do not turn off the power while the printer is updating." msgstr "确定要更新吗？更新需要大约10分钟，在此期间请勿关闭电源。" +# AI Translated msgid "An important update was detected and needs to be run before printing can continue. Do you want to update now? You can also update later from 'Update firmware'." -msgstr "检测到重要更新，需要升级后才可进行打印。你想现在就开始升级吗？你也可以稍后点击‘升级固件’完成升级。" +msgstr "检测到重要更新，需要升级后才可进行打印。是否立即升级？您也可以稍后点击“更新固件”完成升级。" # AI Translated msgid "The firmware version is abnormal. Repairing and updating are required before printing. Do you want to update now? You can also update later on the printer or update next time you start Orca Slicer." -msgstr "当前固件版本异常，需要进行修复升级，否则无法继续打印。你想现在就开始升级吗？你也可以稍后在打印机上升级，或者下一次启动 Orca Slicer 时再升级。" +msgstr "当前固件版本异常，需要进行修复升级，否则无法继续打印。是否立即升级？您也可以稍后在打印机上升级，或者下一次启动 Orca Slicer 时再升级。" msgid "Extension Board" msgstr "扩展板" @@ -13727,18 +14317,20 @@ msgid "Failed to download vendor profile: %1%" msgid_plural "Failed to download vendor profiles: %1%" msgstr[0] "下载供应商配置失败：%1%" +# AI Translated msgid "Please check any unsaved changes before updating the configuration." -msgstr "需要在配置更新之前检查没有保存的参数修改。" +msgstr "更新配置前，请检查所有未保存的更改。" msgid "Open G-code file:" msgstr "打开G-code文件：" # AI Translated msgid "Wipe tower generation failed, possibly due to empty first layer." -msgstr "擦拭塔生成失败，可能是第一层为空。" +msgstr "擦拭塔生成失败，可能是首层为空。" +# AI Translated msgid "One object has an empty first layer and can't be printed. Please Cut the bottom or enable supports." -msgstr "模型出现空层无法打印。请切掉底部或打开支撑。" +msgstr "有对象的首层为空，无法打印。请切掉底部或开启支撑。" #, boost-format msgid "The object has empty layers between %1% and %2% and can’t be printed." @@ -13754,8 +14346,9 @@ msgstr "部分模型在这些高度可能过薄，或者模型存在面片错误 msgid "Process change extrusion role G-code" msgstr "工艺挤出类型更换 G-code" +# AI Translated msgid "Filament change extrusion role G-code" -msgstr "耗材挤出类型更换 G-code" +msgstr "耗材丝挤出类型更换 G-code" # AI Translated #. TRN %1% is a file path. @@ -13812,8 +14405,9 @@ msgstr "此盘设置为 IDEX/IQEX 模式“%1%”，但所选打印机未定义 msgid "Invalid thumbnails value:" msgstr "缩略图值无效：" +# AI Translated msgid "Your print is very close to the priming regions. Make sure there is no collision." -msgstr "你的指纹非常接近启动区域。确保没有碰撞。" +msgstr "您的打印件非常靠近预挤出区域，请确保不会发生碰撞。" msgid "" "Failed to generate G-code for invalid custom G-code.\n" @@ -13829,8 +14423,9 @@ msgstr "请检查自定义G-code，或者使用默认的。" msgid "Generating G-code: layer %1%" msgstr "正在生成G-code：层%1%" +# AI Translated msgid "Flush volumes matrix do not match to the correct size!" -msgstr "冲洗量矩阵与正确的尺寸不匹配！" +msgstr "冲刷量矩阵的尺寸不正确！" msgid "set_accel_and_jerk() is only supported by Klipper" msgstr "set_accel_and_jerk() 仅受 Klipper 支持" @@ -13904,12 +14499,14 @@ msgstr "“%2%”的修改器“%1%”（共 %3% 个）对接缝没有影响（ msgid "Seam placement may differ from expected." msgstr "接缝位置可能与预期不同。" +# AI Translated #, boost-format msgid "Failed to write the G-code statistics to %1%." -msgstr "" +msgstr "无法将 G-code 统计信息写入 %1%。" +# AI Translated msgid "Internal Bridge" -msgstr "内部搭桥" +msgstr "内部桥接" # AI Translated msgid "Flow::spacing() produced negative spacing. Did you set some extrusion width too small?" @@ -14011,8 +14608,9 @@ msgstr "文件关闭失败" msgid "file seek failed" msgstr "文件随机访问失败" +# AI Translated msgid "file stat failed" -msgstr "文件统计信息失败" +msgstr "获取文件信息失败" msgid "invalid parameter" msgstr "无效参数" @@ -14134,14 +14732,16 @@ msgstr "擦拭塔距离结块检测区域太近，打印时可能会发生碰撞 msgid "Prime tower is partially outside the printable area, and it cannot be printed.\n" msgstr "擦拭塔有部分超出可打印区域，无法打印。\n" +# AI Translated msgid "Selected nozzle temperatures are incompatible. Each filament's nozzle temperature must fall within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." -msgstr "所选的喷嘴温度不兼容。每种耗材的喷嘴温度都必须落在其他耗材的推荐喷嘴温度范围内。否则可能会发生喷嘴堵塞或打印机损坏。" +msgstr "所选的喷嘴温度不兼容。每种耗材丝的喷嘴温度都必须落在其他耗材丝的推荐喷嘴温度范围内。否则可能会发生喷嘴堵塞或打印机损坏。" msgid "Invalid recommended nozzle temperature range. The lower bound must be lower than the upper bound." msgstr "推荐喷嘴温度范围无效。下限必须低于上限。" +# AI Translated msgid "If you still want to print, you can enable the option in Preferences / Control / Slicing / Remove mixed temperature restriction." -msgstr "如果您仍要打印，可以在 偏好设置 / 控制 / 切片 / 移除混合温度限制 中启用该选项。" +msgstr "如果您仍要打印，可以在 偏好设置 / 控制 / 切片 / 解除混合温度限制 中启用该选项。" msgid "No extrusions under current settings." msgstr "根据当前设置，不会生成任何打印。" @@ -14205,8 +14805,9 @@ msgstr "使用了渐变混合耗材丝，但“混色子层”已关闭。渐变 msgid "Smooth mode of timelapse is not supported when \"by object\" sequence is enabled." msgstr "平滑模式的延时摄影不支持在逐件打印模式下使用。" +# AI Translated msgid "Clumping detection is not supported when \"by object\" sequence is enabled." -msgstr "启用“按对象”序列时，不支持结块检测。" +msgstr "打印顺序为“逐件”时，不支持结块检测。" # AI Translated msgid "The belt purge tower is not generated in \"By object\" print sequence; filament changes will not be purged." @@ -14220,11 +14821,13 @@ msgstr "已启用传送带冲刷塔，但项目中没有冲刷塔对象，换料 msgid "The project contains multiple managed belt purge towers. Reload the plate or toggle the belt purge tower off and on to regenerate it." msgstr "项目中包含多个自动管理的传送带冲刷塔。请重新加载此盘，或将传送带冲刷塔关闭后再开启，以重新生成。" +# AI Translated msgid "Enabling both precise Z height and the prime tower may cause slicing errors." -msgstr "同时启用精确Z高度和擦拭塔可能会导致切片错误。" +msgstr "同时启用精准 Z 高度和擦拭塔可能会导致切片错误。" +# AI Translated msgid "A prime tower is required for clumping detection; otherwise, there may be flaws on the model." -msgstr "结块检测需要 Prime 塔；否则，模型可能存在缺陷。" +msgstr "结块检测需要擦拭塔，否则模型可能存在缺陷。" msgid "Please select \"By object\" print sequence to print multiple objects in spiral vase mode." msgstr "请选择逐件打印以支持在旋转花瓶模式下打印多个对象。" @@ -14236,32 +14839,38 @@ msgstr "不支持在包含多个材料的打印中使用旋转花瓶模式。" msgid "While the object %1% itself fits the build volume, it exceeds the maximum build volume height because of material shrinkage compensation." msgstr "虽然对象 %1% 本身适合构建体积，但由于材料收缩补偿，它超出了最大构建体积高度。" +# AI Translated #, boost-format msgid "While the object %1% itself fits the build volume, its last layer exceeds the maximum build volume height." -msgstr "对象 %1% 自身虽然构建体积合适，但最后一层却超过了最大构建体积高度" +msgstr "虽然对象 %1% 本身未超出构建体积，但其最后一层超过了最大构建体积高度。" +# AI Translated msgid "You might want to reduce the size of your model or change current print settings and retry." -msgstr "或许您想要缩小模型的尺寸，或者更改当前打印设置，然后重试" +msgstr "您可以缩小模型尺寸或更改当前打印设置，然后重试。" #, boost-format msgid "The object %1% exceeds the maximum build volume height." msgstr "对象 %1% 超过了最大构建体积高度" +# AI Translated msgid "Variable layer height is not supported with Organic supports." -msgstr "Organic支撑不支持可变层高。" +msgstr "有机树支撑不支持可变层高。" # AI Translated msgid "The wipe tower filament cannot be a mixed filament." msgstr "擦拭塔耗材丝不能是混合耗材丝。" +# AI Translated msgid "Different nozzle diameters and different filament diameters may not work well when the prime tower is enabled. It's very experimental, so please proceed with caution." -msgstr "当启用擦拭塔时，不同的喷嘴直径和不同的耗材丝直径可能无法很好地工作。这是非常实验性的，所以请谨慎操作。" +msgstr "启用擦拭塔时，不同的喷嘴直径和不同的耗材丝直径可能无法很好地配合。该功能仍处于实验阶段，请谨慎使用。" +# AI Translated msgid "The Wipe Tower is currently only supported with the relative extruder addressing (use_relative_e_distances=1)." -msgstr "当前仅支持使用相对挤出器寻址（use_relative_e_distances=1）的情况下使用擦拭塔。" +msgstr "擦拭塔目前仅支持相对挤出机寻址（use_relative_e_distances=1）。" +# AI Translated msgid "Ooze prevention is only supported with the wipe tower when 'single_extruder_multi_material' is off." -msgstr "只有当'single_extruder_multi_material'关闭时，擦拭塔才支持防渗。" +msgstr "仅当 'single_extruder_multi_material' 关闭时，“防渗料”才支持与擦拭塔一起使用。" msgid "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, RepRapFirmware and Repetier G-code flavors." msgstr "擦拭塔目前仅支持Marlin、RepRap/Sprinter、RepRapFirmware和Repetier G-code风格。" @@ -14272,8 +14881,9 @@ msgstr "擦拭塔不支持在逐件打印模式下使用。" msgid "A prime tower is not supported when adaptive layer height is on. It requires that all objects have the same layer height." msgstr "不支持在可变层高开启时使用擦拭塔。它要求所有对象拥有相同的层高。" +# AI Translated msgid "A prime tower requires any “support gap” to be a multiple of layer height." -msgstr "擦拭塔要求”支撑间隙“为层高的整数倍。" +msgstr "擦拭塔要求“支撑间隙”为层高的整数倍。" msgid "A prime tower requires that all objects have the same layer height." msgstr "擦拭塔要求各个对象拥有同样的层高。" @@ -14281,14 +14891,16 @@ msgstr "擦拭塔要求各个对象拥有同样的层高。" msgid "A prime tower requires that all objects are printed over the same number of raft layers." msgstr "擦拭塔要求各个对象使用同样的筏层数量。" +# AI Translated msgid "The prime tower is only supported for multiple objects if they are printed with the same support_top_z_distance." -msgstr "仅当多个对象使用相同的 support_top_z_distance 打印时，才支持主塔。" +msgstr "仅当多个对象使用相同的 support_top_z_distance 打印时，才支持擦拭塔。" msgid "A prime tower requires that all objects are sliced with the same layer height." msgstr "擦拭塔要求各个对象拥有同样的层高。" +# AI Translated msgid "The prime tower is only supported if all objects have the same variable layer height." -msgstr "各个对象的层高存在差异，无法启用擦料塔" +msgstr "仅当所有对象的可变层高相同时，才支持擦拭塔。" msgid "One or more object were assigned an extruder that the printer does not have." msgstr "为一个或多个对象分配了打印机没有的挤出机。" @@ -14299,32 +14911,39 @@ msgstr "线宽太小" msgid "Line width too large" msgstr "线宽太大" +# AI Translated msgid "Printing with multiple extruders of differing nozzle diameters. If support is to be printed with the current filament (support_filament == 0 or support_interface_filament == 0), all nozzles have to be of the same diameter." -msgstr "使用不同喷嘴直径的多个挤出机进行打印。如果要使用当前耗材打印支撑（support_filament == 0 或 support_interface_filament == 0），则所有喷嘴必须具有相同的直径。" +msgstr "使用不同喷嘴直径的多个挤出机进行打印。如果要使用当前耗材丝打印支撑（support_filament == 0 或 support_interface_filament == 0），则所有喷嘴必须具有相同的直径。" msgid "A prime tower requires that support has the same layer height as the object." msgstr "擦拭塔要求支撑和对象采用同样的层高。" +# AI Translated msgid "For Organic supports, two walls are supported only with the Hollow/Default base pattern." -msgstr "对于有机支撑，仅在空心/默认主体图案下支持双墙。" +msgstr "对于有机树支撑，仅在空心/默认主体图案下支持双墙。" msgid "The Lightning base pattern is not supported by this support type; Rectilinear will be used instead." msgstr "此支撑类型不支持闪电主体图案；将改用直线图案。" +# AI Translated msgid "Organic support tree tip diameter must not be smaller than support material extrusion width." -msgstr "Organic支撑树尖端直径不得小于支撑材料挤出宽度。" +msgstr "有机树支撑的树尖端直径不得小于支撑材料挤出宽度。" +# AI Translated msgid "Organic support branch diameter must not be smaller than 2x support material extrusion width." -msgstr "Organic支撑分支的直径不得小于支撑材料挤出宽度的2倍。" +msgstr "有机树支撑的分支直径不得小于支撑材料挤出宽度的2倍。" +# AI Translated msgid "Organic support branch diameter must not be smaller than support tree tip diameter." -msgstr "Organic支撑分支的直径不得小于支撑树尖端的直径。" +msgstr "有机树支撑的分支直径不得小于支撑树尖端的直径。" +# AI Translated msgid "The Hollow base pattern is not supported by this support type; Rectilinear will be used instead." -msgstr "此支撑类型不支持空心底座图案；将改用直线填充。" +msgstr "此支撑类型不支持空心主体图案；将改用直线图案。" +# AI Translated msgid "Support enforcers are used but support is not enabled. Please enable support." -msgstr "使用了支撑添加器但没有打开支撑。请打开支撑。" +msgstr "使用了支撑生成器但没有打开支撑。请打开支撑。" msgid "Layer height cannot exceed nozzle diameter." msgstr "层高不能超过喷嘴直径" @@ -14338,8 +14957,9 @@ msgstr "在 before_layer_change_gcode 中发现了 \"G92 E0\"，但其中的 G msgid "\"G92 E0\" was found in layer_change_gcode, but the G or E are not uppercase. Please change them to the exact uppercase \"G92 E0\"." msgstr "在 layer_change_gcode 中发现了 \"G92 E0\"，但其中的 G 或 E 不是大写。请将它们改为完全大写的 \"G92 E0\"。" +# AI Translated msgid "Relative extruder addressing requires resetting the extruder position at each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to layer_gcode." -msgstr "相对挤出机寻址要求在每层重置挤出机位置，以防止浮点精度损失。将 \"G92E0\" 添加到图层代码中。" +msgstr "相对挤出机寻址要求在每层重置挤出机位置，以防止浮点精度损失。请将 \"G92 E0\" 添加到 layer_gcode 中。" msgid "\"G92 E0\" was found in before_layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "在 before_layer_change_gcode 中发现了 \"G92 E0\"，这与绝对挤出机寻址不兼容。" @@ -14347,9 +14967,10 @@ msgstr "在 before_layer_change_gcode 中发现了 \"G92 E0\"，这与绝对挤 msgid "\"G92 E0\" was found in layer_change_gcode, which is incompatible with absolute extruder addressing." msgstr "在 layer_change_gcode 中发现了 \"G92 E0\"，这与绝对挤出机寻址不兼容。" +# AI Translated #, c-format, boost-format msgid "Plate %d: %s does not support filament %s" -msgstr "盘 %d: %s 不支持耗材丝 %s" +msgstr "盘 %d：%s 不支持耗材丝 %s" msgid "Setting the jerk speed too low could lead to artifacts on curved surfaces" msgstr "将抖动(jerk)速度设置得太低可能会导致打印曲面时出现瑕疵" @@ -14363,13 +14984,14 @@ msgstr "" "Orca将自动限制抖动速度，以确保不超过打印机的速度限制。\n" "您可以调整打印机配置中的最大抖动速度设置，以获得更高的速度。" +# AI Translated msgid "" "Junction deviation setting exceeds the printer's maximum value (machine_max_junction_deviation).\n" "Orca will automatically cap the junction deviation to ensure it doesn't surpass the printer's capabilities.\n" "You can adjust the machine_max_junction_deviation value in your printer's configuration to get higher limits." msgstr "" -"连接偏差设置超出打印机的最大值 (machine_max_junction_deviation)。\n" -"Orca 将自动限制连接偏差，以确保其不会超出打印机的能力。\n" +"结点偏差设置超出打印机的最大值 (machine_max_junction_deviation)。\n" +"Orca 将自动限制结点偏差，以确保其不会超出打印机的能力。\n" "您可以调整打印机配置中的 machine_max_junction_deviation 值以获得更高的限制。" msgid "" @@ -14390,14 +15012,16 @@ msgstr "" "Orca将自动限制加速度，以确保不超过打印机的速度限制。\n" "您可以调整打印机配置中的machine_max_acceleration_travel值，以获得更高的速度。" +# AI Translated msgid "The precise wall option will be ignored for outer-inner or inner-outer-inner wall sequences." -msgstr "当壁序列为外内或内外内时，精确墙壁选项将被忽略。" +msgstr "当“墙顺序”为“外墙/内墙”或“内墙/外墙/内墙”时，“精准外墙尺寸”选项将被忽略。" msgid "The Adaptive Pressure Advance model for one or more extruders may contain invalid values." msgstr "一个或多个挤出机的自适应 Pressure Advance 模型可能包含无效值。" +# AI Translated msgid "Filament shrinkage will not be used because filament shrinkage for the used filaments does not match." -msgstr "不会使用耗材收缩率，因为所用耗材的耗材收缩率不匹配。" +msgstr "所用耗材丝的收缩率不一致，因此不会使用耗材丝收缩率。" # AI Translated msgid "The print is empty. The model is not printable with current print settings." @@ -14406,14 +15030,15 @@ msgstr "打印内容为空。当前打印设置下无法打印该模型。" msgid "Generating skirt & brim" msgstr "正在生成裙边和brim" +# AI Translated msgid "" "Per-object skirts cannot fit between the objects in By object print sequence.\n" "\n" "Move the objects farther apart, reduce brim/skirt size, switch Skirt type to Combined, or switch Print sequence to By layer." msgstr "" -"在“逐件”打印顺序下，物体之间无法容纳逐物体裙边。\n" +"在“逐件”打印顺序下，对象之间无法容纳按对象生成的裙边。\n" "\n" -"请增大物体之间的距离、减小 brim/裙边尺寸、将裙边类型切换为“组合”，或将打印顺序切换为“逐层”。" +"请增大对象之间的距离、减小 brim/裙边尺寸、将裙边类型切换为“合并”，或将打印顺序切换为“逐层”。" msgid "Exporting G-code" msgstr "正在导出G-code" @@ -14444,29 +15069,36 @@ msgstr "可打印区域" msgid "Extruder printable area" msgstr "挤出机可打印区域" +# AI Translated msgid "Support parallel printheads" -msgstr "支持并联打印头" +msgstr "支持并联工具头" +# AI Translated msgid "Enable printer settings for machines that can use multiple printheads in parallel." -msgstr "为可并联使用多个打印头的机器启用打印机设置。" +msgstr "为可并联使用多个工具头的机器启用打印机设置。" +# AI Translated msgid "Parallel printheads count" -msgstr "并联打印头数量" +msgstr "并联工具头数量" +# AI Translated msgid "Set the number of parallel printheads for machines like OrangeStorm Giga printer." -msgstr "设置并联打印头的数量，适用于 OrangeStorm Giga 等打印机。" +msgstr "设置并联工具头的数量，适用于 OrangeStorm Giga 等打印机。" +# AI Translated msgid "Parallel printheads bed exclude areas" -msgstr "并联打印头的热床排除区域" +msgstr "并联工具头的热床排除区域" +# AI Translated msgid "Ordered list of bed exclude areas by parallel printhead count. Item 1 applies to one printhead, item 2 to two printheads, and so on. Leave an item empty for no excluded area." -msgstr "按并联打印头数量排列的热床排除区域有序列表。第 1 项适用于一个打印头，第 2 项适用于两个打印头，依此类推。将某项留空表示无排除区域。" +msgstr "按并联工具头数量排列的热床排除区域有序列表。第 1 项适用于一个工具头，第 2 项适用于两个工具头，依此类推。将某项留空表示无排除区域。" msgid "Excluded bed area" msgstr "不可打印区域" +# AI Translated msgid "Unprintable area in XY plane. For example, X1 Series printers use the front left corner to cut filament during filament change. The area is expressed as polygon by points in following format: \"XxY, XxY, ...\"" -msgstr "XY平面上的不可打印区域。例如，X1系列打印机在换料过程中，会使用左前角区域来切断耗材丝。这个多边形区域由以下格式的点表示：“XxY，XxY，…”" +msgstr "XY平面上的不可打印区域。例如，X1系列打印机在换料过程中，会使用左前角区域来切断耗材丝。这个多边形区域由以下格式的点表示：\"XxY, XxY, ...\"" msgid "Bed custom texture" msgstr "自定义热床纹理" @@ -14477,14 +15109,16 @@ msgstr "自定义热床模型" msgid "Elephant foot compensation" msgstr "象脚补偿" +# AI Translated msgid "This shrinks the first layer on the build plate to compensate for elephant foot effect." -msgstr "将首层收缩用于补偿象脚效应" +msgstr "收缩热床上的首层，以补偿象脚效应。" msgid "Elephant foot compensation layers" msgstr "象脚补偿层数" +# AI Translated msgid "The number of layers on which the elephant foot compensation will be active. The first layer will be shrunk by the elephant foot compensation value, then the next layers will be linearly shrunk less, up to the layer indicated by this value." -msgstr "象脚补偿将处于活动状态的层数。第一层将按象脚补偿值缩小，然后接下来的层将线性缩小，直到该值指示的层。" +msgstr "象脚补偿生效的层数。首层按象脚补偿值收缩，之后各层的收缩量线性递减，直到此值指定的层。" msgid "Elephant foot layers density" msgstr "象脚补偿层密度" @@ -14522,11 +15156,13 @@ msgstr "导入模型时自动旋转到指定的朝向" msgid "Printer preset names" msgstr "打印机预设名" +# AI Translated msgid "Use 3rd-party print host" -msgstr "启用第三方网络连接" +msgstr "使用第三方打印主机" +# AI Translated msgid "Allow controlling BambuLab's printer through 3rd party print hosts." -msgstr "允许通过第三方网络连接控制BambuLab的打印机" +msgstr "允许通过第三方打印主机控制 Bambu Lab 打印机。" msgid "Use 3MF instead of G-code" msgstr "使用 3MF 代替 G-code" @@ -14537,23 +15173,27 @@ msgstr "如果打印机接受 3MF 文件作为打印任务，请启用此选项 msgid "Printer Agent" msgstr "打印机代理" +# AI Translated msgid "Select the network agent implementation for printer communication." -msgstr "选择打印机通信的网络代理实施。" +msgstr "选择用于打印机通信的网络代理实现。" msgid "Hostname, IP or URL" msgstr "主机名，IP或者URL" +# AI Translated msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the hostname, IP address or URL of the printer host instance. Print host behind HAProxy with basic auth enabled can be accessed by putting the user name and password into the URL in the following format: https://username:password@your-octopi-address/" -msgstr "Orca Slicer可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、IP地址或URL。启用基本身份验证的Print host可以通过将用户名和密码放入以下格式的URL中来访问：https://username:password@your-octopi-address/" +msgstr "Orca Slicer可以将G-code文件上传到打印机主机。此字段应包含打印机主机实例的主机名、IP地址或URL。对于位于 HAProxy 之后并启用了基本身份验证的打印主机，可按以下格式将用户名和密码写入URL来访问：https://username:password@your-octopi-address/" msgid "Device UI" msgstr "设备用户界面" +# AI Translated msgid "Specify the URL of your device user interface if it's not same as print_host." -msgstr "如果打印机的设备用户界面的URL不同，请在此指定。" +msgstr "如果设备用户界面的URL与 print_host 不同，请在此指定。" +# AI Translated msgid "API Key / Password" -msgstr "API秘钥/密码" +msgstr "API密钥/密码" msgid "Orca Slicer can upload G-code files to a printer host. This field should contain the API Key or the password required for authentication." msgstr "Orca Slicer可以将G-code文件上传到打印机主机。此字段应包含用于身份验证的API密钥或密码。" @@ -14588,15 +15228,16 @@ msgstr "与物理打印机相关的预设名称" msgid "Authorization Type" msgstr "授权类型" +# AI Translated msgid "API key" -msgstr "API秘钥" +msgstr "API密钥" msgid "HTTP digest" msgstr "HTTP摘要" # AI Translated msgid "Configuration for the plugin capabilities this preset uses, overriding the global Capabilities configuration. Stored as a raw JSON array and edited through the dialog behind the button, never typed in directly." -msgstr "此预设使用的插件功能的配置，会覆盖全局功能(Capabilities)配置。以原始 JSON 数组形式存储，并通过按钮后面的对话框进行编辑，切勿直接输入。" +msgstr "此预设使用的插件功能的配置，会覆盖全局功能(Capabilities)配置。以原始 JSON 数组形式存储，通过按钮打开的对话框编辑，请勿直接输入。" msgid "Avoid crossing walls" msgstr "避免跨越外墙" @@ -14616,8 +15257,9 @@ msgstr "mm 或 %" msgid "Other layers" msgstr "其它层" +# AI Translated msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." -msgstr "除首层外的其他层的热床温度。0值表示该耗材丝不支持在Cool Plate SuperTack上打印。" +msgstr "除首层外的其他层的热床温度。0值表示该耗材丝不支持在低温打印热床（超强粘附）上打印。" msgid "This is the bed temperature for layers except for the first one. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "非首层热床温度。0值表示这个耗材丝不支持低温打印热床" @@ -14637,11 +15279,13 @@ msgstr "非首层热床温度。0值表示这个耗材丝不支持纹理PEI热 msgid "First layer" msgstr "首层" +# AI Translated msgid "First layer bed temperature" -msgstr "首层床温" +msgstr "首层热床温度" +# AI Translated msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate SuperTack." -msgstr "初始层的床温。值 0 表示耗材不支持在 Cool Plate SuperTack 上打印。" +msgstr "首层热床温度。0值表示这个耗材丝不支持在低温打印热床（超强粘附）上打印。" msgid "This is the bed temperature of the first layer. A value of 0 means the filament does not support printing on the Cool Plate." msgstr "首层热床温度。0值表示这个耗材丝不支持低温打印热床" @@ -14667,8 +15311,9 @@ msgstr "默认热床类型" msgid "Default bed type for the printer (supports both numeric and string format)." msgstr "打印机的默认热床类型（支持数字和字符串格式）。" +# AI Translated msgid "First layer print sequence" -msgstr "第一层打印顺序" +msgstr "首层打印顺序" msgid "Other layers print sequence" msgstr "其他层打印顺序" @@ -14676,27 +15321,34 @@ msgstr "其他层打印顺序" msgid "The number of other layers print sequence" msgstr "其他层的打印顺序数量" +# AI Translated msgid "Other layers filament sequence" -msgstr "其他层的耗材打印顺序" +msgstr "其他层的耗材丝打印顺序" msgid "This G-code is inserted at every layer change before the Z lift." msgstr "在每次换层抬升z高度之前插入这段G-code" +# AI Translated msgid "Bottom shell layers" -msgstr "底部壳体层数" +msgstr "底部外壳层数" +# AI Translated msgid "This is the number of solid layers of bottom shell, including the bottom surface layer. When the thickness calculated by this value is thinner than bottom shell thickness, the bottom shell layers will be increased." -msgstr "底部壳体实心层层数，包括底面。当由该层数计算的厚度小于底部壳体厚度，切片时会增加底部壳体的层数" +msgstr "底部外壳实心层层数，包括底面。当由该层数计算的厚度小于底部外壳厚度，切片时会增加底部外壳的层数。" +# AI Translated msgid "Bottom shell thickness" -msgstr "底部壳体厚度" +msgstr "底部外壳厚度" +# AI Translated msgid "The number of bottom solid layers is increased when slicing if the thickness calculated by bottom shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and the thickness of the bottom shell is determined simply by the number of bottom shell layers." -msgstr "如果由底部壳体层数算出的厚度小于这个数值，那么切片时将自动增加底部壳体层数。这能够避免当层高很小时，底部壳体过薄。0表示关闭这个设置，同时底部壳体的厚度完全由底部壳体层数决定" +msgstr "如果由底部外壳层数算出的厚度小于这个数值，那么切片时将自动增加底部外壳层数。这能够避免当层高很小时，底部外壳过薄。0表示关闭这个设置，同时底部外壳的厚度完全由底部外壳层数决定。" +# AI Translated msgid "Apply gap fill" -msgstr "启用间隙填充" +msgstr "启用缝隙填充" +# AI Translated msgid "" "Enables gap fill for the selected solid surfaces. The minimum gap length that will be filled can be controlled from the filter out tiny gaps option below.\n" "\n" @@ -14711,16 +15363,25 @@ msgid "" "\n" "However this is not advised, as gap fill between perimeters is contributing to the model's strength. For models where excessive gap fill is generated between perimeters, a better option would be to switch to the arachne wall generator and use this option to control whether the cosmetic top and bottom surface gap fill is generated." msgstr "" -"为选定的实体曲面启用间隙填充。可以通过下面的过滤掉微小间隙选项来控制要填充的最小间隙长度。 选项：\n" -"1. 无处不在：对顶部、底部和内部固体表面进行间隙填充，以获得最大强度\n" -"2. 顶部和底部表面：仅对顶部和底部表面应用间隙填充，平衡打印速度，减少固体填充中过度挤出的可能性，并确保顶部和底部表面没有针孔间隙\n" -"3. 无处：禁用所有实体填充区域的间隙填充 请注意，如果使用经典的周长生成器，如果全宽线无法容纳在周长之间，则也可能在周长之间生成间隙填充。周边间隙填充不受此设置控制。 如果您希望删除所有间隙填充（包括生成的经典周长），请将过滤掉微小间隙的值设置为一个较大的数字，例如 999999。 然而，不建议这样做，因为周边之间的间隙填充有助于提高模型的强度。对于在周边之间生成过多间隙填充的模型，更好的选择是切换到蜘蛛壁生成器并使用此选项来控制是否生成装饰性顶部和底部表面间隙填充。" +"为选定的实心表面启用缝隙填充。可通过下方的“忽略微小间隙”选项控制要填充的最小间隙长度。\n" +"\n" +"选项：\n" +"1. 所有地方：对顶面、底面和内部实心表面进行缝隙填充，以获得最大强度\n" +"2. 顶面和底面：仅对顶面和底面进行缝隙填充，兼顾打印速度，减少实心填充中可能出现的过挤出，并确保顶面和底面没有针孔间隙\n" +"3. 不填充：禁用所有实心填充区域的缝隙填充\n" +"\n" +"请注意，如果使用经典墙生成器，当墙之间放不下一条全宽线时，也可能在墙之间生成缝隙填充。这种墙间缝隙填充不受此设置控制。\n" +"\n" +"如果您希望去除所有缝隙填充（包括经典墙生成器生成的），请将“忽略微小间隙”设为一个很大的数值，例如 999999。\n" +"\n" +"但不建议这样做，因为墙之间的缝隙填充有助于提高模型强度。对于在墙之间生成过多缝隙填充的模型，更好的做法是切换到 Arachne 墙生成器，并用此选项控制是否生成顶面和底面的装饰性缝隙填充。" msgid "Everywhere" msgstr "所有地方" +# AI Translated msgid "Top and bottom surfaces" -msgstr "仅顶层和底层" +msgstr "顶面和底面" msgid "Nowhere" msgstr "不填充" @@ -14734,21 +15395,23 @@ msgstr "启用此选项以允许单独针对悬垂、内部桥接和外部桥接 msgid "Overhangs and external bridges fan speed" msgstr "悬垂和外部桥接风扇速度" +# AI Translated msgid "" "Use this part cooling fan speed when printing bridges or overhang walls with an overhang threshold that exceeds the value set in the 'Overhangs cooling threshold' parameter above. Increasing the cooling specifically for overhangs and bridges can improve the overall print quality of these features.\n" "\n" "Please note, this fan speed is clamped on the lower end by the minimum fan speed threshold set above. It is also adjusted upwards up to the maximum fan speed threshold when the minimum layer time threshold is not met." msgstr "" -"当打印桥接结构或悬垂墙时，如果悬垂程度超过上述“悬垂冷却阈值”所设定的值，则使用此部件冷却风扇速度。专门针对悬垂和桥接加大冷却力度，有助于提升这些特征整体的打印质量。\n" +"当打印桥接结构或悬垂墙时，如果悬垂程度超过上述“悬垂冷却激活阈值”所设定的值，则使用此部件冷却风扇速度。专门针对悬垂和桥接加大冷却力度，有助于提升这些特征整体的打印质量。\n" "\n" "请注意，此风扇速度的下限受前面设置的最小风扇速度阈值限制；当打印层时间未达到最小层时间阈值时，会相应上调至最大风扇速度阈值。" msgid "Overhang cooling activation threshold" msgstr "悬垂冷却激活阈值" +# AI Translated #, no-c-format, no-boost-format msgid "When the overhang exceeds this specified threshold, force the cooling fan to run at the 'Overhang Fan Speed' set below. This threshold is expressed as a percentage, indicating the portion of each line's width that is unsupported by the layer beneath it. Setting this value to 0% forces the cooling fan to run for all outer walls, regardless of the overhang degree." -msgstr "当悬垂超过此指定阈值时，强制部件冷却风扇按照下方设置的“悬垂风扇速度”运转。该阈值以百分比表示，指示每条走线宽度中未被下层支撑的部分。将此值设置为0%即使在任何悬垂条件下也会使风扇运转于所有外壁。" +msgstr "当悬垂超过此阈值时，强制部件冷却风扇以下方设置的“悬垂和外部桥接风扇速度”运转。该阈值以百分比表示，指每条线宽度中未被下层支撑的比例。设为0%时，无论悬垂程度如何，所有外墙都会强制开启冷却风扇。" msgid "External bridge infill direction" msgstr "外部桥接填充方向" @@ -14806,6 +15469,7 @@ msgstr "启用后，桥接角度值将被加到自动计算出的桥接方向上 msgid "External bridge density" msgstr "外部桥接密度" +# AI Translated msgid "" "Controls the density (spacing) of external bridge lines.\n" "Theoretically, 100% means a solid bridge, but due to the tendency of bridge extrusions to sag, 100% may not be sufficient.\n" @@ -14818,7 +15482,7 @@ msgid "" " - Pros: Can create a string-like first layer. Faster and with better cooling because there is more space for air to circulate around the extruded bridge.\n" " - Cons: May lead to sagging and poorer surface finish." msgstr "" -"控制外部桥接线的密度（间距）。默认值为 100%。\n" +"控制外部桥接线的密度（间距）。\n" "理论上 100% 意味着实心桥接，但由于桥接挤出物容易下垂，100% 可能并不足够。\n" "\n" "- 高于 100% 的密度（推荐最大 125%）：\n" @@ -14864,6 +15528,7 @@ msgstr "" msgid "Bridge flow ratio" msgstr "桥接流量比例" +# AI Translated msgid "" "This value governs the thickness of the external (visible) bridge layer.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" @@ -14875,7 +15540,7 @@ msgstr "" "大于 1.0 的值：在保持线间距的同时增加材料用量。这可以改善线之间的接触和强度。\n" "小于 1.0 的值：在调整线间距以保持接触的同时减少材料用量。这可以改善下垂。\n" "\n" -"实际使用的桥接流量是将此值乘以耗材流量比，以及（如已设置）对象的流量比计算得出的。" +"实际使用的桥接流量是将此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例计算得出的。" # AI Translated msgid "" @@ -14885,7 +15550,7 @@ msgid "" "The maximum value is 100% or the nozzle diameter.\n" "If set to 0, the line width will match the Internal solid infill width, or the nozzle diameter for thick bridges." msgstr "" -"桥接线的线宽。如果以百分比表示，将根据喷嘴直径计算。\n" +"桥接线的线宽。如果以%表示，将根据喷嘴直径计算。\n" "建议与较高的桥接密度或桥接流量比例配合使用。\n" "\n" "最大值为 100% 或喷嘴直径。\n" @@ -14895,6 +15560,7 @@ msgstr "" msgid "Internal bridge flow ratio" msgstr "内部桥接流量比例" +# AI Translated msgid "" "This value governs the thickness of the internal bridge layer. This is the first layer over sparse infill so increasing it may increase strength and upper layer quality.\n" "Values above 1.0: Increase the amount of material while maintaining line spacing. This can improve line contact and strength.\n" @@ -14906,147 +15572,209 @@ msgstr "" "大于 1.0 的值：在保持线间距的同时增加材料用量。这可以改善线之间的接触和强度。\n" "小于 1.0 的值：在调整线间距以保持接触的同时减少材料用量。这可以改善下垂。\n" "\n" -"实际使用的桥接流量是将此值乘以耗材流量比，以及（如已设置）对象的流量比计算得出的。" +"实际使用的桥接流量是将此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例计算得出的。" +# AI Translated msgid "Top surface flow ratio" -msgstr "顶部表面流量比例" +msgstr "顶面流量比例" +# AI Translated msgid "" "This factor affects the amount of material for top solid infill. You can decrease it slightly to have smooth surface finish.\n" "\n" "The actual top surface flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响顶部固体填充的材料量。您可以稍微减少它以获得光滑的表面光洁度。 实际使用的顶面流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响顶部实心填充的材料用量。您可以略微减小此值，以获得光滑的表面。\n" +"\n" +"实际使用的顶面流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Bottom surface flow ratio" -msgstr "底部表面流量比例" +msgstr "底面流量比例" +# AI Translated msgid "" "This factor affects the amount of material for bottom solid infill.\n" "\n" "The actual bottom solid infill flow used is calculated by multiplying this value with the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响底部固体填充的材料量。 实际使用的底部固体填充流量是通过将该值乘以细丝流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响底部实心填充的材料用量。\n" +"\n" +"实际使用的底部实心填充流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Set other flow ratios" -msgstr "设置其他流量比" +msgstr "设置其他流量比例" +# AI Translated msgid "Change flow ratios for other extrusion path types." -msgstr "更改其他挤出路径类型的流量比。" +msgstr "更改其他挤出路径类型的流量比例。" +# AI Translated msgid "First layer flow ratio" -msgstr "第一层流量比" +msgstr "首层流量比例" +# AI Translated msgid "" "This factor affects the amount of material on the first layer for the extrusion path roles listed in this section.\n" "\n" "For the first layer, the actual flow ratio for each path role (does not affect brims and skirts) will be multiplied by this value." -msgstr "此因素会影响本节中列出的挤出路径角色的第一层上的材料量。 对于第一层，每个路径角色的实际流量比（不影响Brim和​裙边）将乘以该值。" +msgstr "" +"此系数影响首层上本节所列各挤出类型的材料用量。\n" +"\n" +"在首层，各挤出类型的实际流量比例（不影响 Brim 和裙边）都会再乘以此值。" +# AI Translated msgid "Outer wall flow ratio" -msgstr "外壁流量比" +msgstr "外墙流量比例" +# AI Translated msgid "" "This factor affects the amount of material for outer walls.\n" "\n" "The actual outer wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响外墙材料的用量。 实际使用的外壁流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响外墙的材料用量。\n" +"\n" +"实际使用的外墙流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Inner wall flow ratio" -msgstr "内壁流量比" +msgstr "内墙流量比例" +# AI Translated msgid "" "This factor affects the amount of material for inner walls.\n" "\n" "The actual inner wall flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响内壁材料的用量。 实际使用的内壁流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响内墙的材料用量。\n" +"\n" +"实际使用的内墙流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Overhang flow ratio" -msgstr "悬垂流量比" +msgstr "悬垂流量比例" +# AI Translated msgid "" "This factor affects the amount of material for overhangs.\n" "\n" "The actual overhang flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响悬垂材料的数量。 实际使用的悬垂流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响悬垂的材料用量。\n" +"\n" +"实际使用的悬垂流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Sparse infill flow ratio" -msgstr "稀疏填充流量比" +msgstr "稀疏填充流量比例" +# AI Translated msgid "" "This factor affects the amount of material for sparse infill.\n" "\n" "The actual sparse infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响稀疏填充的材料量。 实际使用的稀疏填充流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响稀疏填充的材料用量。\n" +"\n" +"实际使用的稀疏填充流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Internal solid infill flow ratio" -msgstr "内部固体填充流动比" +msgstr "内部实心填充流量比例" +# AI Translated msgid "" "This factor affects the amount of material for internal solid infill.\n" "\n" "The actual internal solid infill flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响内部固体填充材料的数量。 实际使用的内部固体填充流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响内部实心填充的材料用量。\n" +"\n" +"实际使用的内部实心填充流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Gap fill flow ratio" -msgstr "间隙填充流量比" +msgstr "缝隙填充流量比例" +# AI Translated msgid "" "This factor affects the amount of material for filling the gaps.\n" "\n" "The actual gap filling flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响填充间隙的材料量。 实际使用的间隙填充流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响缝隙填充的材料用量。\n" +"\n" +"实际使用的缝隙填充流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" +# AI Translated msgid "Support flow ratio" -msgstr "支撑流量比" +msgstr "支撑流量比例" +# AI Translated msgid "" "This factor affects the amount of material for support.\n" "\n" "The actual support flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响支撑材料的数量。 实际使用的支撑流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响支撑的材料用量。\n" +"\n" +"实际使用的支撑流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" msgid "Support interface flow ratio" msgstr "支撑面流量比例" +# AI Translated msgid "" "This factor affects the amount of material for the support interface.\n" "\n" "The actual support interface flow used is calculated by multiplying this value by the filament flow ratio, and if set, the object's flow ratio." -msgstr "该因素影响支撑界面的材料量。 实际使用的支撑界面流量是通过将该值乘以耗材流量比以及对象的流量比（如果已设置）来计算的。" +msgstr "" +"此系数影响支撑面的材料用量。\n" +"\n" +"实际使用的支撑面流量为此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例。" msgid "Precise wall" msgstr "精准外墙尺寸" +# AI Translated msgid "Improve shell precision by adjusting outer wall spacing. This also improves layer consistency. NOTE: This option will be ignored for outer-inner or inner-outer-inner wall sequences." -msgstr "通过调整墙壁间距来提高外墙精度，同时改善层间一致性。注意：当壁序列为外内或内外内时，此选项将被忽略。" +msgstr "通过调整外墙间距来提高外壳精度，同时改善层间一致性。注意：当墙顺序为“外墙/内墙”或“内墙/外墙/内墙”时，此选项将被忽略。" msgid "Only one wall on top surfaces" msgstr "顶面单层墙" +# AI Translated msgid "Use only one wall on flat top surfaces, to give more space to the top infill pattern." -msgstr "顶面只使用单层墙，从而更多的空间能够使用顶部填充图案" +msgstr "平坦顶面只使用一层墙，为顶面填充图案留出更多空间。" msgid "One wall threshold" msgstr "单层墙阈值" +# AI Translated #, no-c-format, no-boost-format msgid "" "If a top surface has to be printed and it's partially covered by another layer, it won't be considered at a top layer where its width is below this value. This can be useful to not let the 'one perimeter on top' trigger on surface that should be covered only by perimeters. This value can be a mm or a % of the perimeter extrusion width.\n" "Warning: If enabled, artifacts can be created if you have some thin features on the next layer, like letters. Set this setting to 0 to remove these artifacts." msgstr "" -"如果顶面需要打印，但是它的一部分被其它层覆盖，那么当它的宽度小于这个值时，它不会被认为是顶层。这个设置可以用于避免在狭窄顶面上触发“顶面单层墙”。这个值可以是毫米或线宽的百分比。\n" -"警告：如果启用，可能会在下一层上产生一些薄的特征，比如字母。将此设置设置为0可以消除这些伪影。" +"如果需要打印顶面，而它有一部分被另一层覆盖，那么宽度小于此值的部分不会被视为顶层。这样可以避免“顶面单层墙”在本应只由墙覆盖的表面上触发。此值可以是毫米，或墙线宽的百分比（%）。\n" +"警告：启用后，如果下一层有细小特征（如字母），可能会产生瑕疵。将此值设为0可消除这些瑕疵。" msgid "Only one wall on first layer" msgstr "首层仅单层墙" +# AI Translated msgid "Use only one wall on first layer, to give more space to the bottom infill pattern." -msgstr "首层只使用单层墙，从而更多的空间能够使用底部填充图案" +msgstr "首层只使用一层墙，为底面填充图案留出更多空间。" +# AI Translated msgid "Extra perimeters on overhangs" -msgstr "悬垂上的额外周长" +msgstr "悬垂处额外墙" +# AI Translated msgid "Create additional perimeter paths over steep overhangs and areas where bridges cannot be anchored." -msgstr "在陡峭的悬垂和无法固定桥接的区域上创建额外的周长路径。" +msgstr "在陡峭的悬垂和无法锚固桥接的区域上生成额外的墙路径。" msgid "Reverse on even" msgstr "反转偶数层悬垂方向" @@ -15054,18 +15782,21 @@ msgstr "反转偶数层悬垂方向" msgid "Overhang reversal" msgstr "悬垂反转" +# AI Translated msgid "" "Extrude perimeters that have a part over an overhang in the reverse direction on even layers. This alternating pattern can drastically improve steep overhangs.\n" "\n" "This setting can also help reduce part warping due to the reduction of stresses in the part walls." msgstr "" -"在偶数层上，将悬垂部分的走线反转。这种交替的走线模式可以大大改善陡峭的悬垂。\n" +"在偶数层上，以相反方向挤出有部分位于悬垂上方的墙。这种交替模式可以大幅改善陡峭的悬垂。\n" "\n" -"这个设置也可以帮助减少零件变形，因为零件墙壁的应力减少了。" +"此设置还能降低零件墙中的应力，从而有助于减少零件翘曲。" +# AI Translated msgid "Reverse only internal perimeters" -msgstr "仅反转内部墙壁" +msgstr "仅反转内墙" +# AI Translated msgid "" "Apply the reverse perimeters logic only on internal perimeters.\n" "\n" @@ -15073,15 +15804,16 @@ msgid "" "\n" "For this setting to be the most effective, it is recommended to set the Reverse Threshold to 0 so that all internal walls print in alternating directions on even layers irrespective of their overhang degree." msgstr "" -"仅在内墙上应用反转墙壁逻辑。\n" +"仅在内墙上应用反转墙逻辑。\n" "\n" -"这个设置大大减少了零件的应力，因为它们现在是交替方向分布的。这应该减少零件变形，同时保持外墙的质量。这个功能对于易变形的材料非常有用，比如ABS/ASA，也对于弹性耗材，比如TPU和丝光PLA。它还可以帮助减少支撑上的悬垂区域的变形。\n" +"此设置可大幅降低零件应力，因为应力被分散到交替的方向上。这应能减少零件翘曲，同时保持外墙质量。此功能对易翘曲的材料（如ABS/ASA）以及弹性耗材丝（如TPU和丝光PLA）非常有用，还有助于减少支撑上方悬空区域的翘曲。\n" "\n" -"为了使这个设置最有效，建议将反转阈值设置为0，这样所有的内墙都会在偶数层交替打印。" +"为使此设置发挥最大效果，建议将“反转阈值”设为0，这样无论悬垂程度如何，所有内墙都会在偶数层上以交替方向打印。" msgid "Bridge counterbore holes" msgstr "沉孔搭桥" +# AI Translated msgid "" "This option creates bridges for counterbore holes, allowing them to be printed without support. Available modes include:\n" "1. None: No bridge is created\n" @@ -15089,9 +15821,9 @@ msgid "" "3. Sacrificial Layer: A full sacrificial bridge layer is created" msgstr "" "此选项为沉孔创建搭桥，使其可以在无支撑的情况下打印。可用的模式包括：\n" -"1. 无：不创建搭桥。\n" -"2. 部分搭桥：仅部分不支撑的区域将被搭桥。\n" -"3. 牺牲层：创建一个完整的牺牲层。" +"1. 无：不创建搭桥\n" +"2. 部分搭桥：仅对部分无支撑区域搭桥\n" +"3. 牺牲层：创建一个完整的牺牲搭桥层" msgid "Partially bridged" msgstr "部分搭桥" @@ -15105,21 +15837,23 @@ msgstr "反转阈值" msgid "Overhang reversal threshold" msgstr "悬垂反转阈值" +# AI Translated #, no-c-format, no-boost-format msgid "" "Number of mm the overhang need to be for the reversal to be considered useful. Can be a % of the perimeter width.\n" "Value 0 enables reversal on every even layers regardless.\n" "When Detect overhang wall is not enabled, this option is ignored and reversal happens on every even layers regardless." msgstr "" -"判定悬垂反转需要的值（毫米），可以是线宽的百分比。\n" -"值0表示在每个偶数层上都启用反转。\n" -"当未启用检测悬垂时，此选项将被忽略，反转将在每个偶数层上发生。" +"悬垂需要达到多少毫米，反转才被视为有用。可以是墙线宽的百分比（%）。\n" +"值为0时，每个偶数层都会反转。\n" +"未启用“识别悬垂外墙”时，此选项将被忽略，每个偶数层都会反转。" msgid "Slow down for overhangs" msgstr "悬垂降速" +# AI Translated msgid "Enable this option to slow down when printing overhangs. The speeds for different overhang percentages are set below." -msgstr "启用此选项将降低不同悬垂程度的走线的打印速度" +msgstr "启用此选项可在打印悬垂时降低速度。不同悬垂百分比的速度在下方设置。" msgid "Slow down for curled perimeters" msgstr "翘边降速" @@ -15142,10 +15876,10 @@ msgid "" "Note: When this option is enabled, overhang perimeters are treated like overhangs, meaning the overhang speed is applied even if the overhanging perimeter is part of a bridge.\n" "For example, when the perimeters are 100% overhanging, with no wall supporting them from underneath, the 75% overhang speed will be applied, limited by the bridge speed." msgstr "" -"启用此选项可在墙壁可能向上翘曲的区域降低打印速度。\n" +"启用此选项可在墙可能向上翘曲的区域降低打印速度。\n" "例如，在打印诸如 Benchy 船头这类尖角处的悬垂时，会施加额外的减速，从而减少在多层中逐渐累积的翘曲。\n" "\n" -"通常建议开启此选项，除非您的打印机冷却足够强劲，或打印速度足够慢，以至于不会发生墙壁翘曲。 \n" +"通常建议开启此选项，除非您的打印机冷却足够强劲，或打印速度足够慢，以至于不会发生墙翘曲。 \n" "如果以较高的外墙速度打印，此参数在减速时可能会引入墙面瑕疵，因为打印速度的差异可能过大，导致挤出机无法跟上所需的流量变化。\n" "这些瑕疵的根本原因很可能是 Pressure Advance (PA) 调校略有偏差，尤其是在搭配较长的 PA 平滑时间时。\n" "\n" @@ -15154,8 +15888,8 @@ msgstr "" "2. 提高最低打印速度，以限制减速的幅度并减小快慢段之间的差异。\n" "3. 如果仍出现瑕疵，启用平滑挤出率 (ERS) 以进一步平滑流量过渡。\n" "\n" -"注意：启用此选项后，悬垂墙壁会被当作悬垂处理，这意味着即使悬垂墙壁是桥接的一部分，也会应用悬垂速度。\n" -"例如，当墙壁 100% 悬垂、下方没有墙壁支撑时，将应用 75% 的悬垂速度，并受桥接速度限制。" +"注意：启用此选项后，悬垂墙会被当作悬垂处理，这意味着即使悬垂墙是桥接的一部分，也会应用悬垂速度。\n" +"例如，当墙 100% 悬垂、下方没有墙支撑时，将应用 75% 的悬垂速度，并受桥接速度限制。" msgid "mm/s or %" msgstr "mm/s 或 %" @@ -15194,7 +15928,7 @@ msgstr "" "\n" "在传送带表面上测量，并在“Brim宽度”的基础上叠加：Brim 在对象前方延伸的距离为“Brim与模型的间隙”+“前缘 Brim 长度”+“Brim宽度”。请将“Brim与模型的间隙”设为 0，否则这条前置 Brim 带将接触不到它要固定的对象。\n" "\n" -"在倾斜的传送带上，每层铺设一条 Brim，因此最终 Brim 片的厚度由流量而非层高决定，可通过“Brim流量比”调节。\n" +"在倾斜的传送带上，每层铺设一条 Brim，因此最终 Brim 片的厚度由流量而非层高决定，可通过“Brim流量比例”调节。\n" "\n" "设置为 0 以禁用。" @@ -15219,8 +15953,9 @@ msgstr "" msgid "Brim type" msgstr "Brim类型" +# AI Translated msgid "This controls the generation of the brim at outer and/or inner side of models. Auto means the brim width is analyzed and calculated automatically." -msgstr "该参数控制在模型的外侧和/或内侧生成brim。自动是指自动分析和计算边框的宽度。" +msgstr "该参数控制在模型的外侧和/或内侧生成 Brim。“自动”表示自动分析并计算 Brim 宽度。" # AI Translated msgid "Leading edge only" @@ -15232,9 +15967,11 @@ msgstr "Brim与模型的间隙" msgid "This creates a gap between the innermost brim line and the object and can make the brim easier to remove." msgstr "在brim和模型之间设置间隙，能够让brim更容易剥离" +# AI Translated msgid "Brim flow ratio" -msgstr "Brim流量比" +msgstr "Brim流量比例" +# AI Translated msgid "" "This factor affects the amount of material for brims.\n" "\n" @@ -15244,9 +15981,9 @@ msgid "" msgstr "" "此系数影响Brim的材料用量。\n" "\n" -"实际使用的Brim流量是将此值乘以耗材流量比，以及（如已设置）对象的流量比计算得出的。\n" +"实际使用的Brim流量是将此值乘以耗材丝流量比例，以及（如已设置）对象的流量比例计算得出的。\n" "\n" -"注意：所得的值不会受首层流量比的影响。" +"注意：所得的值不会受首层流量比例的影响。" msgid "Brim follows compensated outline" msgstr "Brim遵循补偿轮廓" @@ -15258,8 +15995,8 @@ msgid "" "\n" "If your current setup already works well, enabling it may be unnecessary and can cause the brim to fuse with upper layers." msgstr "" -"启用后，Brim 将与应用象脚补偿之后的第一层轮廓几何对齐。\n" -"此选项适用于象脚补偿会明显改变第一层轮廓的情况。\n" +"启用后，Brim 将与应用象脚补偿之后的首层轮廓几何对齐。\n" +"此选项适用于象脚补偿会明显改变首层轮廓的情况。\n" "\n" "如果您当前的设置已经运行良好，则可能没有必要启用它，因为它可能导致 Brim 与上层融合。" @@ -15269,26 +16006,31 @@ msgstr "合并Brim" msgid "Combine multiple brims into one when they are close to each other. This can improve brim adhesion." msgstr "当多个Brim彼此靠近时，将它们合并为一个。这可以改善Brim附着力。" +# AI Translated msgid "Brim ears" -msgstr "圆盘" +msgstr "耳状 Brim" +# AI Translated msgid "Only draw brim over the sharp edges of the model." -msgstr "仅在模型尖锐Brim启用brim。" +msgstr "仅在模型的尖锐边缘处生成 Brim。" +# AI Translated msgid "Brim ear max angle" -msgstr "圆盘最大角度" +msgstr "耳状 Brim最大角度" +# AI Translated msgid "" "Maximum angle to let a brim ear appear.\n" "If set to 0, no brim will be created.\n" "If set to ~180, brim will be created on everything but straight sections." msgstr "" -"让圆盘出现的最大角度。\n" -"如果设置为0，则不会创建圆盘。\n" -"如果设置为约180，除直线部分外，其他部分都会创建圆盘。" +"让耳状 Brim出现的最大角度。\n" +"如果设置为0，则不会创建耳状 Brim。\n" +"如果设置为约180，除直线部分外，其他部分都会创建耳状 Brim。" +# AI Translated msgid "Brim ear detection radius" -msgstr "圆盘检测半径" +msgstr "耳状 Brim检测半径" msgid "" "The geometry will be decimated before detecting sharp angles. This parameter indicates the minimum length of the deviation for the decimation.\n" @@ -15299,7 +16041,7 @@ msgstr "" # AI Translated msgid "Brim ears outer only" -msgstr "仅外轮廓生成圆盘" +msgstr "仅外轮廓生成耳状 Brim" # AI Translated msgid "Generate mouse ears only on the outer contour of the model, excluding holes and enclosed sections." @@ -15311,11 +16053,13 @@ msgstr "向上兼容的机器" msgid "Condition" msgstr "条件" +# AI Translated msgid "A Boolean expression using the configuration values of an active printer profile. If this expression evaluates to true, this profile is considered compatible with the active printer profile." -msgstr "使用活动打印机配置文件的配置值的布尔表达式。如果此表达式计算为 true,则此配置文件将被视为与活动打印机配置文件兼容。" +msgstr "使用活动打印机配置文件的配置值的布尔表达式。如果此表达式计算为 true，则此配置文件将被视为与活动打印机配置文件兼容。" +# AI Translated msgid "A Boolean expression using the configuration values of an active print profile. If this expression evaluates to true, this profile is considered compatible with the active print profile." -msgstr "使用活动打印配置文件的配置值的布尔表达式。如果此表达式计算为 true,则此配置文件将被视为与活动打印配置文件兼容。" +msgstr "使用活动打印配置文件的配置值的布尔表达式。如果此表达式计算为 true，则此配置文件将被视为与活动打印配置文件兼容。" msgid "This determines the print sequence, allowing you to print layer-by-layer or object-by-object." msgstr "打印顺序，逐层打印或者逐件打印" @@ -15347,7 +16091,7 @@ msgstr "" "全部比较（最短路径）：评估所有策略并采用最短的一种。对象实例的顺序在整个打印任务中只确定一次，而各个岛的排序则逐层确定，因此不同层可能采用不同的策略。切片速度略慢。\n" "蛇形：逐行往复的蛇形遍历，并通过 2-opt 进行优化。非常适合由大量小零件组成的规则阵列。\n" "\n" -"当同一层中使用多种耗材丝或工具时，优先减少换料次数：对象会先按耗材丝分组，本设置仅决定每个耗材丝分组内实例的顺序，因此整体顺序看起来可能不是整个热床上的最短路径。" +"当同一层中使用多种耗材丝或工具头时，优先减少换料次数：对象会先按耗材丝分组，本设置仅决定每个耗材丝分组内实例的顺序，因此整体顺序看起来可能不是整个热床上的最短路径。" msgid "As object list" msgstr "按对象列表中的顺序" @@ -15360,8 +16104,9 @@ msgstr "全部比较（最短路径）" msgid "Snake" msgstr "蛇形" +# AI Translated msgid "Slow printing down for better layer cooling" -msgstr "降低打印速度 以得到更好的冷却" +msgstr "降低打印速度以获得更好的层冷却" msgid "Enable this option to slow printing speed down to ensure that the final layer time is not shorter than the layer time threshold in \"Max fan speed threshold\", so that the layer can be cooled for a longer time. This can improve the quality for small details." msgstr "勾选这个选项，将降低打印速度，使得最终的层打印时间不小于\"最大风扇速度阈值\"里的层时间阈值，从而使得该层获得更久的冷却。这能够改善尖顶和小细节的冷却效果" @@ -15391,17 +16136,20 @@ msgstr "mm/s² 或 %" msgid "Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration." msgstr "桥接加速度。如果该值以百分比（例如50%）表示，则将根据外墙加速度进行计算。" +# AI Translated msgid "Default filament profile" -msgstr "默认耗材配置" +msgstr "默认耗材丝配置" +# AI Translated msgid "Default filament profile when switching to this machine profile." -msgstr "该机器配置的默认耗材配置" +msgstr "切换到此打印机预设时默认使用的耗材丝预设。" msgid "Default process profile" msgstr "默认切片配置" +# AI Translated msgid "Default process profile when switching to this machine profile." -msgstr "该机器的默认切片配置" +msgstr "切换到此打印机预设时默认使用的工艺预设。" msgid "Activate air filtration" msgstr "启用空气过滤/排气" @@ -15424,8 +16172,9 @@ msgstr "打印过程中排气风扇的速度。此速度将覆盖耗材丝自定 msgid "Speed of exhaust fan after printing completes." msgstr "打印完成后排气风扇的速度" +# AI Translated msgid "No cooling for the first" -msgstr "关闭冷却对前" +msgstr "关闭冷却的前" msgid "Turn off all cooling fans for the first few layers. This can be used to improve build plate adhesion." msgstr "对开始的一些层关闭所有的部件冷却风扇。通常关闭首层冷却用来获得更好的热床粘接" @@ -15436,8 +16185,9 @@ msgstr "不支撑桥接" msgid "This disables supporting bridges, which decreases the amount of support required. Bridges can usually be printed directly without support over a reasonable distance." msgstr "不对整个桥接面进行支撑，否则支撑体会很大。不是很长的桥接通常可以无支撑直接打印。" +# AI Translated msgid "Thick external bridges" -msgstr "外部搭桥用厚桥" +msgstr "外部桥接加厚" msgid "" "If enabled, bridge extrusion uses a line height equal to the nozzle diameter.\n" @@ -15448,8 +16198,9 @@ msgstr "" "这会增加桥接的强度和可靠性，允许更长的跨度，但可能使外观变差。\n" "如果禁用，桥接可能看起来更好，但通常只在较短的跨度上才可靠。" +# AI Translated msgid "Thick internal bridges" -msgstr "内部搭桥用厚桥" +msgstr "内部桥接加厚" msgid "" "If enabled, internal bridge extrusion uses a line height equal to the nozzle diameter.\n" @@ -15460,9 +16211,11 @@ msgstr "" "这会在稀疏填充上方打印时增加内部桥接的强度和可靠性，但可能使外观变差。\n" "如果禁用，内部桥接可能看起来更好，但在稀疏填充上方的可靠性可能较低。" +# AI Translated msgid "Extra bridge layers (beta)" -msgstr "额外桥层（测试版）" +msgstr "额外桥接层（试验）" +# AI Translated msgid "" "This option enables the generation of an extra bridge layer over internal and/or external bridges.\n" "\n" @@ -15478,13 +16231,13 @@ msgid "" msgstr "" "此选项启用在内部和/或外部桥接上生成额外桥接层。\n" "\n" -"额外桥接层有助于改善桥接的外观和可靠性，因为实心填充得到了更好的支撑。这对于快速打印机特别有用，因为桥接和实心填充的速度差异很大。额外的桥接层可以减少顶面的枕化效应，同时减少外部桥接层与其周围周长的分离。\n" +"额外桥接层有助于改善桥接的外观和可靠性，因为实心填充得到了更好的支撑。这对于快速打印机特别有用，因为桥接和实心填充的速度差异很大。额外的桥接层可以减少顶面的枕化效应，同时减少外部桥接层与其周围墙的分离。\n" "\n" "通常建议将此设置为至少'仅外部桥接'，除非发现切片模型存在特定问题。\n" "\n" "选项：\n" "1. 禁用 - 不生成第二桥接层。这是默认设置，出于兼容性目的而设置\n" -"2. 仅外部桥接 - 仅为面向外部的桥接生成第二桥接层。请注意，比设置的周长数更短或更窄的小桥接将被跳过，因为它们不会从第二桥接层中受益。如果生成，第二桥接层将与第一桥接层平行挤出，以增强桥接强度\n" +"2. 仅外部桥接 - 仅为面向外部的桥接生成第二桥接层。请注意，比设置的墙层数更短或更窄的小桥接将被跳过，因为它们不会从第二桥接层中受益。如果生成，第二桥接层将与第一桥接层平行挤出，以增强桥接强度\n" "3. 仅内部桥接 - 仅为稀疏填充上的内部桥接生成第二桥接层。请注意，内部桥接计入模型的顶部外壳层数。第二内部桥接层将尽可能垂直于第一层挤出。如果在同一岛屿中存在多个具有不同桥接角度的区域，则该岛屿的最后一个区域将被选为角度参考\n" "4. 全部应用 - 为内部和面向外部的桥接生成第二桥接层\n" @@ -15520,17 +16273,20 @@ msgstr "" msgid "Filter" msgstr "过滤" +# AI Translated msgid "Limited filtering" -msgstr "有限保留" +msgstr "有限过滤" +# AI Translated msgid "No filtering" -msgstr "保留全部" +msgstr "不过滤" msgid "Max bridge length" msgstr "最大桥接长度" +# AI Translated msgid "This is the maximum length of bridges that don't need support. Set it to 0 if you want all bridges to be supported, and set it to a very large value if you don't want any bridges to be supported." -msgstr "不需要支撑的桥接的最大长度。如果希望支持所有桥接，请将其设置为0；如果不希望支持任何桥接，请将其设置为非常大的值。" +msgstr "不需要支撑的桥接的最大长度。如果希望所有桥接都有支撑，请将其设置为0；如果不希望任何桥接有支撑，请将其设置为非常大的值。" msgid "End G-code" msgstr "结尾G-code" @@ -15543,15 +16299,18 @@ msgstr "完成整个打印时添加的结尾 G-code。" msgid "Between Object G-code" msgstr "对象之间G-code" +# AI Translated msgid "Insert G-code between objects. This parameter will only come into effect when you print your models object by object." -msgstr "在对象之间插入 G-code。此参数仅在逐个打印模型物体时生效。" +msgstr "在对象之间插入 G-code。此参数仅在逐个打印对象时生效。" +# AI Translated msgid "Add end G-code when finishing the printing of this filament." -msgstr "结束使用该耗材打印时的结尾G-code" +msgstr "结束使用该耗材丝打印时的结尾G-code" msgid "Ensure vertical shell thickness" msgstr "确保垂直外壳厚度" +# AI Translated msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers)\n" "None: No solid infill will be added anywhere. Caution: Use this option carefully if your model has sloped surfaces\n" @@ -15562,7 +16321,7 @@ msgid "" msgstr "" "在倾斜表面附近添加实心填充，以保证垂直外壳的厚度（顶部+底部实心层）\n" "无：任何地方都不会添加实心填充。注意：如果您的模型有倾斜表面，请谨慎使用此选项\n" -"仅关键区域：避免为墙壁添加实心填充\n" +"仅关键区域：避免为墙添加实心填充\n" "适量：仅为严重倾斜的表面添加实心填充\n" "全部：为所有适当的倾斜表面添加实心填充\n" "默认值为全部。" @@ -15610,11 +16369,9 @@ msgstr "八角螺旋" msgid "Top surface density" msgstr "顶面密度" +# AI Translated msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion." -msgstr "" -"顶层表面的密度。\n" -"100% 的值会创建一个完全实心、平滑的顶面。降低此值会根据所选的顶面图案生成有纹理的顶面。0% 的值将只生成顶层的墙。\n" -"此选项仅为美观或功能性目的，而不是为了解决过量挤出等问题。" +msgstr "顶面层的密度。100% 会生成完全实心、平滑的顶层。降低此值会根据所选的顶面图案生成带纹理的顶面。0% 时顶层只生成墙。此选项用于美观或功能目的，而非用于解决过挤出等问题。" # AI Translated msgid "Top surface expansion" @@ -15679,13 +16436,13 @@ msgstr "除了桥接外的底面填充的走线图案" msgid "Bottom surface density" msgstr "底面密度" +# AI Translated msgid "" "Density of the bottom surface layer. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion.\n" "WARNING: Lowering this value may negatively affect bed adhesion." msgstr "" -"底层表面的密度\n" -"此功能是为了美观或功能性目的，而是为了解决过量挤出等问题。\n" -"警告：降低此值会对热床粘接力产生负面影响。" +"底面层的密度。此选项用于美观或功能目的，而非用于解决过挤出等问题。\n" +"警告：降低此值可能会对热床粘接产生负面影响。" # AI Translated msgid "Top surface fill order" @@ -15697,7 +16454,7 @@ msgid "" "Outward starts at the center of the surface, so any excess material is pushed towards the edge where it is least visible. Inward starts at the edge and ends with the tight curves at the center.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"使用以中心为起点的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，顶面的填充方向。\n" +"使用以中心为基准的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，顶面的填充方向。\n" "向外从表面中心开始，多余的材料会被推向边缘，在那里最不显眼。向内从边缘开始，以中心处的紧密曲线结束。\n" "默认使用最短路径排序，方向可能是两者中的任意一种。" @@ -15711,21 +16468,24 @@ msgid "" "Inward starts each surface with the wider outer curves, which improves first layer adhesion on build plates where the tight curves at the center may not stick. Outward starts at the center, pushing any excess material towards the edge.\n" "Default uses shortest-path ordering, which may run in either direction." msgstr "" -"使用以中心为起点的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，底面的填充方向。\n" +"使用以中心为基准的图案（同心、螺旋内缩、阿基米德和弦、八角螺旋）时，底面的填充方向。\n" "向内让每个表面从较宽的外侧曲线开始，可改善首层在热床上的粘接，尤其当中心处的紧密曲线不易粘牢时。向外从中心开始，将多余的材料推向边缘。\n" "默认使用最短路径排序，方向可能是两者中的任意一种。" msgid "Internal solid infill pattern" msgstr "内部实心填充图案" +# AI Translated msgid "Line pattern of internal solid infill. if the detect narrow internal solid infill be enabled, the concentric pattern will be used for the small area." -msgstr "内部实心填充的线型图案。如果启用了检测狭窄的内部实心填充，将使用同心圆图案来填充小区域。" +msgstr "内部实心填充的线型图案。如果启用了“识别狭窄的内部实心填充”，小区域将使用同心图案填充。" +# AI Translated msgid "Line width of outer wall. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "外墙的线宽。如果以%表示，它将基于喷嘴直径来计算" +msgstr "外墙的线宽。如果以%表示，将根据喷嘴直径计算。" +# AI Translated msgid "This is the printing speed for the outer walls of parts. These are generally printed slower than inner walls for higher quality." -msgstr "外墙的打印速度。它通常使用比内壁速度慢的速度，以获得更好的质量。" +msgstr "外墙的打印速度。它通常使用比内墙速度慢的速度，以获得更好的质量。" msgid "Small perimeters" msgstr "微小部位" @@ -15773,7 +16533,7 @@ msgstr "" "\n" "使用内墙/外墙以获得最佳悬垂效果。这是因为在打印时，悬垂的墙可以粘附到相邻的墙上。但是，这个选项会导致外墙的表面质量稍微降低，因为外墙被内墙挤压。\n" "\n" -"使用内墙/外墙/内墙以获得最佳的外部表面质量和尺寸精度，因为外墙不会受内墙的影响。但是，悬垂性能会降低，因为没有内墙来支撑打印外墙。此选项要求至少3层墙壁才能生效，因为它首先从第3个墙壁开始打印内墙，然后是外墙，最后是第一个内墙。在大多数情况下，建议使用此选项而不是外墙/内墙选项。\n" +"使用内墙/外墙/内墙以获得最佳的外部表面质量和尺寸精度，因为外墙不会受内墙的影响。但是，悬垂性能会降低，因为没有内墙来支撑打印外墙。此选项要求至少3层墙才能生效，因为它首先从第3个墙开始打印内墙，然后是外墙，最后是第一个内墙。在大多数情况下，建议使用此选项而不是外墙/内墙选项。\n" "\n" "使用外墙/内墙以获得与内墙/外墙/内墙选项相同的外墙质量和尺寸精度优势。但是，由于新层的第一次挤出是在可见表面上开始的，因此 Z 接缝看起来不那么一致。" @@ -15789,18 +16549,21 @@ msgstr "内墙/外墙/内墙" msgid "Print infill first" msgstr "首先打印填充" +# AI Translated msgid "" "Order of wall/infill. When the tickbox is unchecked the walls are printed first, which works best in most cases.\n" "\n" "Printing infill first may help with extreme overhangs as the walls have the neighbouring infill to adhere to. However, the infill will slightly push out the printed walls where it is attached to them, resulting in a worse external surface finish. It can also cause the infill to shine through the external surfaces of the part." msgstr "" -"墙/填充的顺序。当未启用时，首先打印墙壁，这在大多数情况下都是最好的。\n" +"墙/填充的顺序。当未启用时，首先打印墙，这在大多数情况下都是最好的。\n" "\n" -"首先打印填充可能有助于极端悬垂，因为墙壁有相邻的填充物可以粘附。但是，填充物会在附着在墙壁上的地方轻微地挤出打印的墙壁，导致外部表面质量更差。它还会导致填充物透过零件的外部表面。" +"首先打印填充可能有助于极端悬垂，因为墙有相邻的填充物可以粘附。但是，填充物会在附着在墙上的地方轻微地挤出打印的墙，导致外部表面质量更差。它还会导致填充物透过零件的外部表面。" +# AI Translated msgid "Wall loop direction" -msgstr "围墙打印方向" +msgstr "墙打印方向" +# AI Translated msgid "" "The direction which the contour wall loops are extruded when looking down from the top.\n" "Holes are printed in the opposite direction to the contour to maintain alignment with layers whose contour polygons are incomplete and change direction, also partially forming the contour of a hole.\n" @@ -15810,7 +16573,7 @@ msgstr "" "从上往下看时，轮廓墙环的挤出方向。\n" "孔洞以与轮廓相反的方向打印，以便与那些轮廓多边形不完整、会改变方向（同时也部分构成孔洞轮廓）的层保持对齐。\n" "\n" -"如果启用了螺旋花瓶模式，此选项将被禁用。" +"如果启用了旋转花瓶模式，此选项将被禁用。" msgid "Counter clockwise" msgstr "逆时针" @@ -15820,17 +16583,18 @@ msgstr "顺时针" # AI Translated msgid "Distance to rod" -msgstr "到杆的距离" +msgstr "到横杆的距离" # AI Translated msgid "Horizontal distance of the nozzle tip to the rod's farther edge. Used for collision avoidance in by-object printing." -msgstr "喷嘴尖端到杆较远一侧边缘的水平距离。用于逐件打印时的避障。" +msgstr "喷嘴尖端到横杆较远一侧边缘的水平距离。用于逐件打印时的避障。" msgid "Height to rod" msgstr "到横杆高度" +# AI Translated msgid "Distance from the nozzle tip to the lower rod. Used for collision avoidance in by-object printing." -msgstr "喷嘴尖端到下方滑杆的距离。用于在逐件打印中避免碰撞。" +msgstr "喷嘴尖端到下方横杆的距离。用于在逐件打印中避免碰撞。" msgid "Height to lid" msgstr "到顶盖高度" @@ -15850,14 +16614,16 @@ msgstr "喷嘴尖端的高度。" msgid "Bed mesh min" msgstr "网床最小点" +# AI Translated msgid "This option sets the min point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (-99999, -99999), which means there are no limits, thus allowing probing across the entire bed." -msgstr "此选项设置了允许的网床探测区域的最小点。由于探针的XY偏移，大多数打印机无法探测整个打印床。为了确保探针不会超出床的范围，应适当设置网床的最小和最大点。逆戟鲸切片确保adaptive_bed_mesh_min/adaptive_bed_mesh_max值不超过这些最小/最大点。这些信息通常可以从您的打印机制造商那里获得。默认设置为(-99999, -99999)，这意味着没有限制，因此允许在整个床上进行探测。" +msgstr "此选项设置允许的网床区域的最小点。由于探针存在XY偏移，大多数打印机无法探测整个热床。为确保探测点不超出热床范围，应适当设置网床的最小点和最大点。OrcaSlicer 会确保 adaptive_bed_mesh_min/adaptive_bed_mesh_max 的值不超出这些最小/最大点。此信息通常可从打印机制造商处获得。默认设置为 (-99999, -99999)，表示没有限制，允许探测整个热床。" msgid "Bed mesh max" msgstr "网床最大点" +# AI Translated msgid "This option sets the max point for the allowed bed mesh area. Due to the probe's XY offset, most printers are unable to probe the entire bed. To ensure the probe point does not go outside the bed area, the minimum and maximum points of the bed mesh should be set appropriately. OrcaSlicer ensures that adaptive_bed_mesh_min/adaptive_bed_mesh_max values do not exceed these min/max points. This information can usually be obtained from your printer manufacturer. The default setting is (99999, 99999), which means there are no limits, thus allowing probing across the entire bed." -msgstr "此选项设置了允许的网床探测区域的最大点。由于探针的XY偏移，大多数打印机无法探测整个打印床。为了确保探针不会超出床的范围，应适当设置网床的最小和最大点。逆戟鲸切片确保adaptive_bed_mesh_min/adaptive_bed_mesh_max值不超过这些最小/最大点。这些信息通常可以从您的打印机制造商那里获得。默认设置为(99999, 99999)，这意味着没有限制，因此允许在整个床上进行探测。" +msgstr "此选项设置允许的网床区域的最大点。由于探针存在XY偏移，大多数打印机无法探测整个热床。为确保探测点不超出热床范围，应适当设置网床的最小点和最大点。OrcaSlicer 会确保 adaptive_bed_mesh_min/adaptive_bed_mesh_max 的值不超出这些最小/最大点。此信息通常可从打印机制造商处获得。默认设置为 (99999, 99999)，表示没有限制，允许探测整个热床。" msgid "Probe point distance" msgstr "网格点间距离" @@ -15887,14 +16653,15 @@ msgstr "挤出机偏移" msgid "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow." msgstr "材料经过融化后凝固可能会产生体积差异。这个设置会等比例改变 G-code 中该耗材丝所有挤出走线的挤出量。推荐的范围为0.95到1.05。发现大平层模型的顶面有轻微的缺料或多料时，或许可以尝试微调这个参数。" +# AI Translated msgid "" "The material may have volumetric change after switching between molten and crystalline states. This setting changes all extrusion flow of this filament in G-code proportionally. The recommended value range is between 0.95 and 1.05. You may be able to tune this value to get a nice flat surface if there is slight overflow or underflow.\n" "\n" "The final object flow ratio is this value multiplied by the filament flow ratio." msgstr "" -"材料在熔融和结晶状态之间切换后可能会发生体积变化。此设置会等比例改变此耗材在G-code中的所有挤出流量。推荐值范围在0.95到1.05之间。如果存在轻微的溢出或欠流，您可以调整此值以获得平整的表面。\n" +"材料在熔融和结晶状态之间转变后可能会发生体积变化。此设置会等比例改变此耗材丝在G-code中的所有挤出流量。推荐值范围在0.95到1.05之间。如果存在轻微的过挤出或欠挤出，您可以调整此值以获得平整的表面。\n" "\n" -"最终的对象流量比率是此值乘以耗材流量比率。" +"最终的对象流量比例是此值乘以耗材丝流量比例。" msgid "Enable pressure advance" msgstr "启用 Pressure Advance" @@ -15909,6 +16676,7 @@ msgstr "Pressure Advance（Klipper），即 Marlin 中的 Linear Advance 系数 msgid "Enable adaptive pressure advance (beta)" msgstr "启用自适应 Pressure Advance（试验）" +# AI Translated #, no-c-format, no-boost-format msgid "" "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases. This means that a single PA value is not always 100% optimal for all features and a compromise value is usually used that does not cause too much bulging on features with lower flow speed and accelerations while also not causing gaps on faster features.\n" @@ -15917,11 +16685,18 @@ msgid "" "\n" "When enabled, the pressure advance value above is overridden. However, a reasonable default value above is strongly recommended to act as a fallback and for when tool changing.\n" "\n" -msgstr "With increasing print speeds (and hence increasing volumetric flow through the nozzle) and increasing accelerations, it has been observed that the effective PA value typically decreases.这意味着单个 PA 值并不总是对所有特征都是 100% 最佳的，并且通常使用折衷值，该折衷值不会在具有较低流速和加速度的特征上造成过多的凸出，同时也不会在较快的特征上造成间隙。 此功能旨在通过根据打印时的体积流速和加速度对打印机挤出系统的响应进行建模来解决此限制。在内部，它生成一个拟合模型，可以推断出任何给定体积流速和加速度所需的 Pressure Advance，然后根据当前的打印条件将其发送到打印机。 启用后，上面的 Pressure Advance 值将被覆盖。然而，强烈建议使用上述合理的默认值作为后备以及更换工具时的选择。\n" +msgstr "" +"据观察，随着打印速度（以及由此带来的喷嘴体积流量）和加速度的提高，有效的 PA 值通常会降低。这意味着单一的 PA 值并非对所有特征都是 100% 最优的，通常只能使用一个折中值，既不会在流速和加速度较低的特征上造成过多凸起，也不会在较快的特征上造成间隙。\n" +"\n" +"此功能旨在解决这一限制：根据打印时的体积流速和加速度，对打印机挤出系统的响应进行建模。它会在内部生成一个拟合模型，可以推算出任意体积流速和加速度下所需的 Pressure Advance，然后根据当前打印条件发送给打印机。\n" +"\n" +"启用后，上方的 Pressure Advance 值将被覆盖。但仍强烈建议在上方设置一个合理的默认值，作为后备值，并在切换工具头时使用。\n" +"\n" msgid "Adaptive pressure advance measurements (beta)" msgstr "自适应 Pressure Advance 参数（试验）" +# AI Translated #, no-c-format, no-boost-format msgid "" "Add sets of pressure advance (PA) values, the volumetric flow speeds and accelerations they were measured at, separated by a comma. One set of values per line. For example\n" @@ -15935,18 +16710,20 @@ msgid "" "2. Take note of the optimal PA value for each volumetric flow speed and acceleration. You can find the flow number by selecting flow from the color scheme drop down and move the horizontal slider over the PA pattern lines. The number should be visible at the bottom of the page. The ideal PA value should be decreasing the higher the volumetric flow is. If it is not, confirm that your extruder is functioning correctly. The slower and with less acceleration you print, the larger the range of acceptable PA values. If no difference is visible, use the PA value from the faster test\n" "3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile." msgstr "" -"添加 Pressure Advance (PA) 值组、测量时的体积流速和加速度，并用逗号分隔。每行一组值。例如\n" +"添加 Pressure Advance (PA) 值组，以及测量这些值时的体积流速和加速度，用逗号分隔。每行一组值。例如\n" "0.04,3.96,3000\n" "0.033,3.96,10000\n" "0.029,7.91,3000\n" -"0.026,7.91,10000 如何校准：\n" -"1. 每个加速度值至少以 3 个速度运行 Pressure Advance 测试。建议至少针对外部周边的速度、内部周边的速度以及配置文件中的最快特征打印速度（通常是稀疏或实心填充）运行测试。然后以相同的速度运行它们，以获得最慢和最快的打印加速度，并且不超过 Klipper 输入整形器给出的建议最大加速度\n" -"2. 记下每个体积流速和加速度的最佳 PA 值。您可以通过从配色方案下拉列表中选择流量并将水平滑块移动到 PA 图案线上来找到流量编号。该数字应该在页面底部可见。理想的 PA 值应该随着体积流量的增加而减小。如果不是，请确认您的挤出机运行正常。打印速度越慢且加速度越小，可接受的 PA 值范围就越大。如果没有明显差异，请使用更快测试中的 PA 值\n" -"3. 在此处的文本框中输入 PA 值、流量和加速度的三元组并保存耗材丝配置文件" +"0.026,7.91,10000\n" +"\n" +"如何校准：\n" +"1. 对每个加速度值，至少以 3 个速度运行 Pressure Advance 测试。建议至少测试外墙速度、内墙速度以及配置文件中最快的特征打印速度（通常是稀疏填充或实心填充）。然后以最慢和最快的打印加速度对相同的速度运行测试，加速度不要超过 Klipper 输入整形给出的建议最大加速度\n" +"2. 记下每个体积流速和加速度下的最佳 PA 值。在配色方案下拉列表中选择流量，然后将水平滑块移到 PA 图案线上，即可找到流量数值。该数值会显示在页面底部。理想的 PA 值应随体积流量的增加而减小。如果不是这样，请确认挤出机工作正常。打印速度越慢、加速度越小，可接受的 PA 值范围就越大。如果看不出差异，请使用较快测试中的 PA 值\n" +"3. 在此处的文本框中输入 PA 值、流量和加速度的三元组，并保存耗材丝配置文件。" # AI Translated msgid "Enable adaptive pressure advance within features (beta)" -msgstr "在特征内启用自适应 Pressure Advance (beta)" +msgstr "在特征内启用自适应 Pressure Advance（试验）" # AI Translated msgid "" @@ -15978,8 +16755,9 @@ msgstr "" "\n" "打印桥接时较低的 PA 值有助于减少桥接之后紧接着出现的轻微欠挤出现象。这是由于在空中打印时喷嘴内压力下降所致，较低的 PA 有助于抵消这种情况。" +# AI Translated msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "当线宽设置为0时走线的默认线宽。如果以%表示，它将基于喷嘴直径来计算。" +msgstr "当其他线宽设置为0时使用的默认线宽。如果以%表示，将根据喷嘴直径计算。" msgid "Keep fan always on" msgstr "保持风扇常开" @@ -15990,6 +16768,7 @@ msgstr "如果勾选这个选项，部件冷却风扇将永远不会停止，并 msgid "Don't slow down outer walls" msgstr "不减速外墙" +# AI Translated msgid "" "If enabled, this setting will ensure external perimeters are not slowed down to meet the minimum layer time. This is particularly helpful in the below scenarios:\n" "1. To avoid changes in shine when printing glossy filaments\n" @@ -15997,9 +16776,9 @@ msgid "" "3. To avoid printing at speeds which cause VFAs (fine artifacts) on the external walls" msgstr "" "如果启用，此设置将确保外墙不会为了满足最小层时间而减速。这在以下情况下特别有帮助：\n" -"1. 避免在打印光滑耗材时改变光泽\n" -"2. 避免改变外墙速度，可能会产生轻微的墙壁伪影，看起来像z条纹\n" -"3. 避免以会在外墙上产生VFAs（细微伪影）的速度打印" +"1. 打印高光泽耗材丝时避免光泽变化\n" +"2. 避免外墙速度变化而产生看起来像 Z 纹的轻微墙面瑕疵\n" +"3. 避免以会在外墙上产生 VFA（细微瑕疵）的速度打印" msgid "Layer time" msgstr "层时间" @@ -16015,18 +16794,21 @@ msgstr "s" msgid "Default color" msgstr "默认颜色" +# AI Translated msgid "" "Default filament color.\n" "Right click to reset value to system default." msgstr "" -"默认耗材颜色。\n" +"默认耗材丝颜色。\n" "右键单击以将值重置为系统默认值。" +# AI Translated msgid "Filament notes" -msgstr "耗材注释" +msgstr "耗材丝注释" +# AI Translated msgid "You can put your notes regarding the filament here." -msgstr "你可以把关于耗材的注释放在这里。" +msgstr "您可以把关于耗材丝的注释放在这里。" msgid "Required nozzle HRC" msgstr "喷嘴硬度要求" @@ -16034,37 +16816,44 @@ msgstr "喷嘴硬度要求" msgid "Minimum HRC of nozzle required to print the filament. A value of 0 means no checking of the nozzle's HRC." msgstr "打印此材料的所需的最小喷嘴硬度。零值表示不检查喷嘴硬度。" +# AI Translated msgid "Filament map to extruder" -msgstr "耗材映射到挤出机" +msgstr "耗材丝映射到挤出机" +# AI Translated msgid "Filament map to extruder." -msgstr "耗材映射到挤出机。" +msgstr "耗材丝映射到挤出机。" +# AI Translated msgid "Auto For Flush" -msgstr "自动冲洗" +msgstr "自动（节省冲刷）" msgid "Auto For Match" msgstr "自动匹配" # AI Translated msgid "Nozzle Manual" -msgstr "喷嘴手册" +msgstr "按喷嘴手动" +# AI Translated msgid "Flush temperature" -msgstr "冲洗温度" +msgstr "冲刷温度" +# AI Translated msgid "Temperature when flushing filament. 0 indicates the upper bound of the recommended nozzle temperature range." -msgstr "冲洗耗材丝时的温度。 0 表示推荐喷嘴温度范围的上限。" +msgstr "冲刷耗材丝时的温度。0 表示推荐喷嘴温度范围的上限。" # AI Translated msgid "Flush temperature used in fast purge mode." msgstr "快速冲刷模式下使用的冲刷温度。" +# AI Translated msgid "Flush volumetric speed" -msgstr "冲洗体积流量" +msgstr "冲刷体积流量" +# AI Translated msgid "Volumetric speed when flushing filament. 0 indicates the max volumetric speed." -msgstr "冲洗耗材丝时的体积流量。 0 表示最大体积流量。" +msgstr "冲刷耗材丝时的体积流量。0 表示最大体积流量。" msgid "This setting is the volume of filament that can be melted and extruded per second. Printing speed is limited by max volumetric speed, in case of too high and unreasonable speed setting. This value cannot be zero." msgstr "这个设置表示在1秒内能够融化和挤出的耗材丝体积。打印速度会受到最大体积流量的限制，防止设置过高和不合理的速度。不允许设置为0。" @@ -16072,40 +16861,34 @@ msgstr "这个设置表示在1秒内能够融化和挤出的耗材丝体积。 msgid "Filament load time" msgstr "装载耗材丝的时间" +# AI Translated msgid "Time to load new filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." -msgstr "" -"换料时，装载新耗材过程的耗时。\n" -"通常适用于单挤出机且多材料机器。对于有工具头切换器或多工具头打印机机器，此值通常为 0。\n" -"仅用于统计。" +msgstr "换料时装载新耗材丝所需的时间。通常适用于单挤出机多材料打印机。对于工具头切换打印机或多工具头打印机，此值通常为 0。仅用于统计。" msgid "Filament unload time" msgstr "卸载耗材丝的时间" +# AI Translated msgid "Time to unload old filament when switch filament. It's usually applicable for single-extruder multi-material machines. For tool changers or multi-tool machines, it's typically 0. For statistics only." -msgstr "" -"换料时，卸载旧耗材过程的耗时。\n" -"通常适用于单挤出机且多材料机器。对于有工具头切换器或多工具头打印机机器，此值通常为 0。\n" -"仅用于统计。" +msgstr "换料时卸载旧耗材丝所需的时间。通常适用于单挤出机多材料打印机。对于工具头切换打印机或多工具头打印机，此值通常为 0。仅用于统计。" msgid "Tool change time" msgstr "换工具头所需时间" +# AI Translated msgid "Time taken to switch tools. It's usually applicable for tool changers or multi-tool machines. For single-extruder multi-material machines, it's typically 0. For statistics only." -msgstr "" -"更换工具头过程的耗时。\n" -"通常适用于有工具头切换器或多工具头的打印机。对于单挤出机的多材料机器，此值通常为 0。\n" -"仅用于统计。" +msgstr "切换工具头所需的时间。通常适用于工具头切换打印机或多工具头打印机。对于单挤出机多材料打印机，此值通常为 0。仅用于统计。" msgid "Bed temperature type" msgstr "热床温度类型" +# AI Translated msgid "This option determines how the bed temperature is set during slicing: based on the temperature of the first filament or the highest temperature of the printed filaments." -msgstr "" -"此选项用以设置切片时的热床温度确定方式。\n" -"可选择“根据初始打印耗材”或“根据最高打印温度”。" +msgstr "此选项决定切片时如何设置热床温度：根据首个耗材丝的温度，或根据所打印耗材丝中的最高温度。" +# AI Translated msgid "By First filament" -msgstr "根据初始打印耗材" +msgstr "根据初始打印耗材丝" msgid "By Highest Temp" msgstr "根据最高打印温度" @@ -16116,6 +16899,7 @@ msgstr "耗材丝直径被用于计算G-code文件中的挤出量。因此很重 msgid "Pellet flow coefficient" msgstr "颗粒流动系数" +# AI Translated msgid "" "Pellet flow coefficient is empirically derived and allows for volume calculation for pellet printers.\n" "\n" @@ -16123,8 +16907,11 @@ msgid "" "\n" "filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgstr "" -"颗粒流动系数是基于经验得出的数据，可用于为颗粒耗材打印机开展体积计算。\n" -"在软件内部计算时，它其实会被转换为“耗材丝直径”，其他体积的计算保持不变：耗材丝直径 = 开平方( (4 * 颗粒流动系数) / 圆周率 )" +"颗粒流动系数是根据经验得出的，可用于颗粒打印机的体积计算。\n" +"\n" +"在内部，它会被转换为 filament_diameter。其他所有体积计算保持不变。\n" +"\n" +"filament_diameter = sqrt( (4 * pellet_flow_coefficient) / PI )" msgid "Adaptive volumetric speed" msgstr "自适应体积流量" @@ -16144,35 +16931,36 @@ msgstr "最大体积流量多项式系数" msgid "Shrinkage (XY)" msgstr "收缩率（XY）" +# AI Translated #, no-c-format, no-boost-format msgid "" "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in XY to compensate. For multi-material prints, ensure filament shrinkage matches across all used filaments\n" "Be sure to allow enough space between objects, as this compensation is done after the checks." msgstr "" -"冷却后耗材会收缩的百分比(如果测量的长度是94mm而不是100mm，则为是收缩率为94%)\n" -"补偿将按比例缩放xy轴该补偿仅考虑墙壁所使用的耗材\n" -"请确保物体之间有足够的间距，因为补偿是在边界检查之后进行" +"输入耗材丝冷却后的收缩百分比（如果测得 94mm 而不是 100mm，则为 94%）。零件将在 XY 方向上缩放以进行补偿。对于多材料打印，请确保所有使用的耗材丝的收缩率一致。\n" +"请确保对象之间留有足够的间距，因为此补偿在检查之后进行。" msgid "Shrinkage (Z)" msgstr "收缩率（Z）" +# AI Translated #, no-c-format, no-boost-format msgid "Enter the shrinkage percentage that the filament will get after cooling (94% if you measure 94mm instead of 100mm). The part will be scaled in Z to compensate." -msgstr "" -"冷却后耗材会收缩的百分比(如果测量的长度是94mm而不是100mm，则为是收缩率为94%)\n" -"补偿将按比例缩放Z轴" +msgstr "输入耗材丝冷却后的收缩百分比（如果测得 94mm 而不是 100mm，则为 94%）。零件将在 Z 方向上缩放以进行补偿。" msgid "Adhesiveness Category" msgstr "粘性分类" +# AI Translated msgid "Filament category." -msgstr "耗材分类" +msgstr "耗材丝分类。" msgid "Loading speed" msgstr "装载速度" +# AI Translated msgid "Speed used for loading the filament on the wipe tower." -msgstr "用于擦拭塔加载耗材的速度。" +msgstr "用于擦拭塔加载耗材丝的速度。" msgid "Loading speed at the start" msgstr "加载初始速度" @@ -16183,14 +16971,16 @@ msgstr "最开始加载阶段的速度" msgid "Unloading speed" msgstr "卸载速度" +# AI Translated msgid "Speed used for unloading the filament on the wipe tower (does not affect initial part of unloading just after ramming)." -msgstr "用于擦拭塔卸载耗材的速度（不影响尖端成型之后初始部分的速度）。" +msgstr "用于擦拭塔卸载耗材丝的速度（不影响尖端成型之后初始部分的速度）。" msgid "Unloading speed at the start" msgstr "卸载初始速度" +# AI Translated msgid "Speed used for unloading the tip of the filament immediately after ramming." -msgstr "耗材尖端成型后立即卸载的速度" +msgstr "耗材丝尖端成型后立即卸载的速度。" msgid "Delay after unloading" msgstr "卸载后延迟" @@ -16201,20 +16991,25 @@ msgstr "耗材丝卸载后等待的时间。有助于柔性材料（收缩到原 msgid "Number of cooling moves" msgstr "冷却移动次数" +# AI Translated msgid "Filament is cooled by being moved back and forth in the cooling tubes. Specify desired number of these moves." -msgstr "耗材丝通过在喉管中来回移动来冷却。指定所需的移动次数。" +msgstr "耗材丝通过在冷却管中来回移动来冷却。指定所需的移动次数。" +# AI Translated msgid "Stamping loading speed" -msgstr "尖端成型加载速度" +msgstr "压印加载速度" +# AI Translated msgid "Speed used for stamping." -msgstr "用于尖端成型的速度" +msgstr "用于压印的速度。" +# AI Translated msgid "Stamping distance measured from the center of the cooling tube" -msgstr "从冷却管中心测量的尖端成型距离" +msgstr "从冷却管中心测量的压印距离" +# AI Translated msgid "If set to non-zero value, filament is moved toward the nozzle between the individual cooling moves (\"stamping\"). This option configures how long this movement should be before the filament is retracted again." -msgstr "如果设置为非零值，则在各个冷却移动之间耗材会向喷嘴方向移动（“印模”）。该选项用于配置耗材在重新回抽前应移动多长时间。" +msgstr "如果设置为非零值，则在各个冷却移动之间耗材丝会向喷嘴方向移动（“压印”）。该选项用于配置耗材丝在重新回抽前应移动多长距离。" msgid "Speed of the first cooling move" msgstr "第一次冷却移动的速度" @@ -16222,17 +17017,21 @@ msgstr "第一次冷却移动的速度" msgid "Cooling moves are gradually accelerating beginning at this speed." msgstr "从这个速度开始冷却移动逐渐加速" +# AI Translated msgid "Minimal purge on wipe tower" -msgstr "擦拭塔上的最小清理量" +msgstr "擦拭塔上的最小冲刷量" +# AI Translated msgid "After a tool change, the exact position of the newly loaded filament inside the nozzle may not be known, and the filament pressure is likely not yet stable. Before purging the print head into an infill or a sacrificial object, Orca Slicer will always prime this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably." -msgstr "换色后，新加载的耗材在喷嘴内的确切位置可能未知，耗材压力可能还不稳定。在冲刷打印头到填充或作为挤出废料之前，Orca Slicer将始终将这些的耗材丝冲刷到擦拭塔中以产生连续的填充或稳定的挤出废料。" +msgstr "换色后，新装载的耗材丝在喷嘴内的确切位置可能未知，耗材丝压力也可能尚未稳定。在将工具头冲刷到填充或牺牲对象之前，Orca Slicer 总会先将此数量的材料预挤出到擦拭塔中，以便后续可靠地挤出填充或牺牲对象。" +# AI Translated msgid "Wipe tower cooling" -msgstr "擦料塔冷却" +msgstr "擦拭塔冷却" +# AI Translated msgid "Temperature drop before entering filament tower" -msgstr "进入擦料塔前的降温量" +msgstr "进入擦拭塔前的降温量" msgid "Interface layer pre-extrusion distance" msgstr "接触层预挤出距离" @@ -16279,23 +17078,28 @@ msgstr "尖端成型参数" msgid "This string is edited by RammingDialog and contains ramming specific parameters." msgstr "此内容由尖端成型窗口编辑，包含尖端成型的特定参数。" +# AI Translated msgid "Enable ramming for multi-tool setups" -msgstr "启用多色尖端成型设置" +msgstr "为多工具头设备启用尖端成型" +# AI Translated msgid "Perform ramming when using multi-tool printer (i.e. when the 'Single Extruder Multimaterial' in Printer Settings is unchecked). When checked, a small amount of filament is rapidly extruded on the wipe tower just before the tool change. This option is only used when the wipe tower is enabled." -msgstr "多色打印机执行尖端成型时（即，当打印机设置中的单挤出机多材料未选中时）。选中时，在换色之前，会迅速挤出少量耗材丝到擦拭塔上。此选项仅在启用擦拭塔时使用。" +msgstr "使用多工具头打印机时执行尖端成型（即打印机设置中的“单挤出机多材料”未勾选时）。勾选后，会在换料之前，在擦拭塔上快速挤出少量耗材丝。此选项仅在启用擦拭塔时使用。" +# AI Translated msgid "Multi-tool ramming volume" -msgstr "多色尖端成型体积" +msgstr "多工具头尖端成型体积" msgid "The volume to be rammed before the tool change." msgstr "换色前尖端成型的体积" +# AI Translated msgid "Multi-tool ramming flow" -msgstr "多色尖端成型流量" +msgstr "多工具头尖端成型流量" +# AI Translated msgid "Flow used for ramming the filament before the tool change." -msgstr "换色前耗材尖端成型的流量" +msgstr "换色前耗材丝尖端成型的流量。" msgid "Density" msgstr "密度" @@ -16315,17 +17119,20 @@ msgstr "可溶性材料" msgid "Soluble material is commonly used to print supports and support interfaces." msgstr "可溶性材料通常用于打印支撑和支撑面" +# AI Translated msgid "Filament ramming length" -msgstr "耗材冲击长度" +msgstr "耗材丝尖端成型长度" +# AI Translated msgid "When changing the extruder, it is recommended to extrude a certain length of filament from the original extruder. This helps minimize nozzle oozing." -msgstr "在切换挤出机时，使原先挤出机额外挤出一段耗材，有助耗材末端抽出完整，并减少待命时的喷嘴渗料。" +msgstr "在切换挤出机时，使原先挤出机额外挤出一段耗材丝，有助耗材丝末端抽出完整，并减少待命时的喷嘴渗料。" msgid "Support material" msgstr "支撑材料" +# AI Translated msgid "Support material is commonly used to print supports and support interfaces." -msgstr "支撑材料通常用于打印支撑体和支撑接触面" +msgstr "支撑材料通常用于打印支撑和支撑面。" # AI Translated msgid "Is mixed filament" @@ -16383,19 +17190,21 @@ msgstr "混合耗材丝逐零件渐变" msgid "When gradient mode is enabled, apply the gradient to each part of an assembly independently rather than treating the whole assembly as one Z range." msgstr "启用渐变模式时，对组合体中的每个零件分别应用渐变，而不是将整个组合体视为一个 Z 范围。" +# AI Translated msgid "Filament printable" -msgstr "可打印耗材" +msgstr "可打印耗材丝" +# AI Translated msgid "The filament is printable in extruder." -msgstr "此耗材可通过挤出机打印" +msgstr "此耗材丝可通过挤出机打印。" # AI Translated msgid "Filament-extruder compatibility" -msgstr "耗材-挤出机兼容性" +msgstr "耗材丝-挤出机兼容性" # AI Translated msgid "A single 32-bit int encoding the compatibility level of a filament across all extruders (up to 10). Every 3 bits represent one extruder (bits [3*i, 3*i+2] for extruder i). 0: printable, 1: error, 2: critical warning, 3: warning, 4-7: reserved." -msgstr "一个 32 位整数，用于编码某种耗材在所有挤出机（最多 10 个）上的兼容性级别。每 3 位表示一个挤出机（挤出机 i 对应位 [3*i, 3*i+2]）。0：可打印，1：错误，2：严重警告，3：警告，4-7：保留。" +msgstr "一个 32 位整数，用于编码某种耗材丝在所有挤出机（最多 10 个）上的兼容性级别。每 3 位表示一个挤出机（挤出机 i 对应位 [3*i, 3*i+2]）。0：可打印，1：错误，2：严重警告，3：警告，4-7：保留。" msgid "Softening temperature" msgstr "软化温度" @@ -16413,8 +17222,9 @@ msgstr "耗材丝的价格。只用于统计信息。" msgid "money/kg" msgstr "金额/kg" +# AI Translated msgid "Vendor of filament. For show only." -msgstr "打印耗材的供应商。仅用于展示。" +msgstr "打印耗材丝的供应商。仅用于展示。" msgid "(Undefined)" msgstr "（未定义）" @@ -16575,9 +17385,10 @@ msgstr "指数" msgid "Z-buckling bias optimization (experimental)" msgstr "Z 轴屈曲偏置优化（实验性）" +# AI Translated #, no-c-format, no-boost-format msgid "Tightens the gyroid wave along the Z (vertical) axis at low infill density to shorten the effective vertical column length and improve Z-axis compression buckling resistance. Filament use is preserved. No effect at ~30% sparse infill density and above. Only applies when Sparse infill pattern is set to Gyroid." -msgstr "在低填充密度下沿 Z（垂直）轴收紧螺旋（Gyroid）波形，以缩短有效的垂直柱长，提升 Z 轴抗压屈曲能力。耗材用量保持不变。在约 30% 及以上的稀疏填充密度下无效果。仅当稀疏填充图案设置为 Gyroid 时适用。" +msgstr "在低填充密度下沿 Z（垂直）轴收紧螺旋体波形，以缩短有效的垂直柱长，提升 Z 轴抗压屈曲能力。耗材丝用量保持不变。在约 30% 及以上的稀疏填充密度下无效果。仅当“稀疏填充图案”设置为“螺旋体”时适用。" msgid "Sparse infill pattern" msgstr "稀疏填充图案" @@ -16627,8 +17438,9 @@ msgstr "3D 蜂窝" msgid "Lateral Honeycomb" msgstr "侧向蜂窝" +# AI Translated msgid "Lateral Lattice" -msgstr "侧向向晶格" +msgstr "侧向晶格" msgid "Cross Hatch" msgstr "交叉层叠" @@ -16656,8 +17468,9 @@ msgstr "顶面填充的加速度。使用较低值可能会改善顶面质量" msgid "Acceleration of outer wall: using a lower value can improve quality." msgstr "外墙加速度。使用较小的值可以提高质量。" +# AI Translated msgid "Acceleration of inner walls." -msgstr "内圈墙加速度，使用较低值可以改善质量。" +msgstr "内墙加速度。" msgid "Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "稀疏填充的加速度。如果该值表示为百分比（例如100%），则将根据默认加速度进行计算。" @@ -16665,27 +17478,32 @@ msgstr "稀疏填充的加速度。如果该值表示为百分比（例如100% msgid "Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration." msgstr "内部实心填充的加速度。如果该值以百分比表示（例如100%），则将根据默认加速度进行计算。" +# AI Translated msgid "This is the printing acceleration for the first layer. Using limited acceleration can improve build plate adhesion." -msgstr "首层加速度。使用较低值可以改善和打印板的粘接。" +msgstr "首层的打印加速度。限制加速度可以改善与热床的粘接。" +# AI Translated msgid "Enable accel_to_decel" -msgstr "启用制动速度" +msgstr "启用 accel_to_decel" msgid "Klipper's max_accel_to_decel will be adjusted automatically." msgstr "Klipper的max_accel_to_decel将被自动调整" +# AI Translated msgid "accel_to_decel" -msgstr "制动速度" +msgstr "accel_to_decel" +# AI Translated #, c-format, boost-format msgid "Klipper's max_accel_to_decel will be adjusted to this %% of acceleration." -msgstr "Klipper固件的max_accel_to_decel将被调整为该加速度的百分比。" +msgstr "Klipper 的 max_accel_to_decel 将被调整为加速度的此 %%。" msgid "Default jerk." msgstr "默认抖动" +# AI Translated msgid "Marlin Firmware Junction Deviation (replaces the traditional XY Jerk setting)." -msgstr "Marlin 固件连接偏差（取代传统的 XY Jerk 设置）。" +msgstr "Marlin 固件结点偏差（取代传统的 XY 抖动设置）。" msgid "Jerk of outer walls." msgstr "外墙抖动值" @@ -16712,8 +17530,9 @@ msgstr "" "首层的空驶抖动。\n" "百分比值相对于空驶抖动。" +# AI Translated msgid "Line width of the first layer. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "首层的线宽。若以百分比表示（例如120%），它将基于喷嘴直径来计算。" +msgstr "首层的线宽。如果以%表示，将根据喷嘴直径计算。" msgid "First layer height" msgstr "首层层高" @@ -16742,24 +17561,24 @@ msgstr "首层空驶速度" msgid "Number of slow layers" msgstr "慢速层数量" +# AI Translated msgid "The first few layers are printed slower than normal. The speed is gradually increased in a linear fashion over the specified number of layers." -msgstr "" -"减慢前几层的打印速度。\n" -"打印速度会在这个范围内以线性方式逐层加至满速。" +msgstr "前几层的打印速度比正常速度慢。速度会在指定的层数内以线性方式逐渐提高。" +# AI Translated msgid "First layer nozzle temperature" -msgstr "首层打印温度" +msgstr "首层喷嘴温度" +# AI Translated msgid "Nozzle temperature for printing the first layer with this filament" -msgstr "使用此耗材时的首层打印温度。" +msgstr "使用此耗材丝时的首层打印温度。" msgid "Full fan speed at layer" msgstr "满速风扇在" +# AI Translated msgid "Fan speed will be ramped up linearly from zero at layer \"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower than \"close_fan_the_first_x_layers\", in which case the fan will be running at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1." -msgstr "" -"风扇速度将从“禁用第一层”的零转速，线性上升到“全风扇速度层”的最大转速。\n" -"如果低于“禁用风扇第一层”，则“全风扇速度第一层”将被忽略，在这种情况下，风扇将在“禁用风扇第一层”的后续一层以最大允许速度运行。" +msgstr "风扇速度将从第 \"close_fan_the_first_x_layers\" 层的零转速线性提升到第 \"full_fan_speed_layer\" 层的最大转速。如果 \"full_fan_speed_layer\" 低于 \"close_fan_the_first_x_layers\"，则忽略 \"full_fan_speed_layer\"，此时风扇将在第 \"close_fan_the_first_x_layers\" + 1 层以允许的最大速度运行。" msgid "layer" msgstr "层" @@ -16778,72 +17597,83 @@ msgid "" msgstr "" "为首层设置一个确切的风扇转速，覆盖所有其他冷却设置。有助于保护 3D 打印的工具头部件（例如 Voron 风格的 ABS/ASA 风道）免受热床影响。少量气流可以冷却风道，而不必使用在某些情况下可能损害首层附着的全速冷却。\n" "从第二层开始，恢复正常冷却。\n" -"如果同时设置了“在指定层达到全速风扇”，风扇会在首层从此值平滑爬升，到指定层时达到您的目标值。\n" -"仅当“前几层不冷却”为 0 时可用。\n" +"如果同时设置了“满速风扇在”，风扇会在首层从此值平滑爬升，到指定层时达到您的目标值。\n" +"仅当“关闭冷却的前”为 0 时可用。\n" "设为 -1 以禁用。" +# AI Translated msgid "Support interface fan speed" -msgstr "支撐接触面风扇" +msgstr "支撑面风扇速度" +# AI Translated msgid "" "This part cooling fan speed is applied when printing support interfaces. Setting this parameter to a higher than regular speed reduces the layer binding strength between supports and the supported part, making them easier to separate.\n" "Set to -1 to disable it.\n" "This setting is overridden by disable_fan_first_layers." msgstr "" -"在打印支撑接触面时使用的风扇转速。若设为高于平常的速度，有助降低支撑与打印件之间的层粘结强度，使其更易分离。\n" +"在打印支撑面时使用的部件冷却风扇转速。若设为高于平常的速度，有助降低支撑与打印件之间的层粘结强度，使其更易分离。\n" "设置为 -1 以停用此功能。\n" "该设置会被 disable_fan_first_layers 选项覆盖。" msgid "Internal bridges fan speed" msgstr "内部桥接风扇速度" +# AI Translated msgid "" "The part cooling fan speed used for all internal bridges. Set to -1 to use the overhang fan speed settings instead.\n" "\n" "Reducing the internal bridges fan speed, compared to your regular fan speed, can help reduce part warping due to excessive cooling applied over a large surface for a prolonged period of time." msgstr "" -"用于所有内部桥接的部件冷却风扇转速。设置为 -1 时，将采用悬垂时风扇转速设置。\n" -"与常规转速相比，若降低内部桥接风扇转速，有助缓解长时间大面积施加过度冷却而引起的零件变形。" +"用于所有内部桥接的部件冷却风扇转速。设置为 -1 时，将采用悬垂风扇转速设置。\n" +"\n" +"与常规转速相比，降低内部桥接风扇转速有助于减少因长时间对大面积施加过度冷却而导致的零件翘曲。" msgid "Ironing fan speed" msgstr "熨烫时风扇速度" +# AI Translated msgid "" "This part cooling fan speed is applied when ironing. Setting this parameter to a lower than regular speed reduces possible nozzle clogging due to the low volumetric flow rate, making the interface smoother.\n" "Set to -1 to disable it." msgstr "" -"熨烫时的部件风扇转速。\n" -"设为低于平常的转速，将有助缓解长时间低流量打印的堵头问题。设置为 -1 以停用此功能。" +"熨烫时使用的部件冷却风扇转速。将此参数设为低于常规的转速，可减少因体积流量较低而可能导致的喷嘴堵塞，使表面更平滑。\n" +"设置为 -1 以停用此功能。" msgid "Ironing flow" msgstr "熨烫流量" +# AI Translated msgid "Filament-specific override for ironing flow. This allows you to customize the ironing flow for each filament type. Too high value results in overextrusion on the surface." -msgstr "针对熨烫流程的耗材特定覆盖。这使您可以为每种耗材类型定制熨烫流程。值太高会导致表面过度挤压。" +msgstr "针对熨烫流量的耗材丝专用覆盖设置。可为每种耗材丝类型自定义熨烫流量。值过高会导致表面过挤出。" msgid "Ironing line spacing" msgstr "熨烫间距" +# AI Translated msgid "Filament-specific override for ironing line spacing. This allows you to customize the spacing between ironing lines for each filament type." -msgstr "针对熨烫线间距的耗材特定覆盖。这使您可以自定义每种耗材类型的熨烫线之间的间距。" +msgstr "针对熨烫线间距的耗材丝特定覆盖。这使您可以自定义每种耗材丝类型的熨烫线之间的间距。" msgid "Ironing inset" msgstr "熨烫内缩" +# AI Translated msgid "Filament-specific override for ironing inset. This allows you to customize the distance to keep from the edges when ironing for each filament type." -msgstr "用于熨烫插入的耗材丝特定覆盖。这使您可以自定义熨烫每种耗材丝类型时与边缘保持的距离。" +msgstr "针对熨烫内缩的耗材丝专用覆盖设置。可为每种耗材丝类型自定义熨烫时与边缘保持的距离。" msgid "Ironing speed" msgstr "熨烫速度" +# AI Translated msgid "Filament-specific override for ironing speed. This allows you to customize the print speed of ironing lines for each filament type." -msgstr "特定于耗材的熨烫速度优先。这允许您自定义每种耗材丝类型的熨烫线的打印速度。" +msgstr "针对熨烫速度的耗材丝专用覆盖设置。可为每种耗材丝类型自定义熨烫线的打印速度。" +# AI Translated msgid "This setting makes the toolhead randomly jitter while printing walls so that the surface has a rough textured look. This setting controls the fuzzy position." -msgstr "打印外墙时随机抖动，使外表面产生绒效果。这个设置决定适用的位置。" +msgstr "打印墙时让工具头随机抖动，使表面呈现粗糙的纹理外观。此设置控制绒毛表面的位置。" +# AI Translated msgid "Painted only" -msgstr "仅涂漆" +msgstr "仅手绘区域" msgid "Contour" msgstr "轮廓" @@ -16860,8 +17690,9 @@ msgstr "所有墙" msgid "Fuzzy skin thickness" msgstr "绒毛表面厚度" +# AI Translated msgid "The width of jittering: it’s recommended to keep this lower than the outer wall line width." -msgstr "产生绒毛的抖动的宽度。建议小于外圈墙的线宽。" +msgstr "产生绒毛的抖动的宽度。建议小于外墙的线宽。" msgid "Fuzzy skin point distance" msgstr "绒毛表面点间距" @@ -16872,12 +17703,14 @@ msgstr "产生绒毛表面时，插入的随机点之间的平均距离" msgid "Apply fuzzy skin to first layer" msgstr "绒毛表面应用至首层" +# AI Translated msgid "Whether to apply fuzzy skin on the first layer." -msgstr "是否在第一层应用绒毛效果" +msgstr "是否在首层应用绒毛表面。" msgid "Fuzzy skin generator mode" msgstr "绒毛表面生成器模式" +# AI Translated #, c-format, boost-format msgid "" "Fuzzy skin generation mode. Works only with Arachne!\n" @@ -16887,10 +17720,12 @@ msgid "" "\n" "Attention! The [Extrusion] and [Combined] modes works only the fuzzy_skin_thickness parameter not more than the thickness of printed loop. At the same time, the width of the extrusion for a particular layer should also not be below a certain level. It is usually equal 15-25%% of a layer height. Therefore, the maximum fuzzy skin thickness with a perimeter width of 0.4 mm and a layer height of 0.2 mm will be 0.4-(0.2*0.25)=±0.35mm! If you enter a higher parameter than this, the error Flow::spacing() will displayed, and the model will not be sliced. You can choose this number until this error is repeated." msgstr "" -"模糊皮肤生成模式。仅适用于Arachne！\n" -"位移：经典模式，通过将喷嘴从原始路径向侧面移动来形成图案。\n" -"挤出：通过挤出塑料量而形成图案的模式。这是一种快速而直接的算法，没有不必要的喷嘴抖动，可以产生平滑的图案。但它对于在整个阵列中形成松散的墙壁更有用。\n" -"组合：联合模式【位移】+【挤压】。墙壁的外观与 [位移] 模式类似，但周边之间不留孔隙。注意！[挤出] 和 [组合] 模式仅适用于 fuzzy_skin_thickness 参数不大于打印环厚度的情况。同时，特定层的挤出宽度也不应低于一定水平。它通常等于层高的 15-25%%。因此，周宽为 0.4 mm、层高为 0.2 mm 时，最大绒毛表面厚度为 0.4-(0.2*0.25)=±0.35 mm！如果输入参数高于此值，将显示 Flow::spacing() 错误，且模型不会被切片。您可以调整该数值，直到不再重复出现该错误。" +"绒毛表面生成模式。仅适用于 Arachne！\n" +"位移：经典模式，通过让喷嘴偏离原始路径向侧面移动来形成图案。\n" +"挤出：通过挤出塑料的量来形成图案。这是一种快速、直接的算法，没有多余的喷嘴抖动，可产生平滑的图案。但它更适合用于在整组墙中形成疏松的墙。\n" +"合并：[位移] + [挤出] 的联合模式。墙的外观与 [位移] 模式相似，但墙之间不会留下孔隙。\n" +"\n" +"注意！[挤出] 和 [合并] 模式仅在 fuzzy_skin_thickness 参数不大于所打印环的厚度时有效。同时，特定层的挤出宽度也不应低于一定水平，通常为层高的 15-25%%。因此，在墙线宽为 0.4 mm、层高为 0.2 mm 时，最大绒毛表面厚度为 0.4-(0.2*0.25)=±0.35mm！如果输入的参数高于此值，将显示 Flow::spacing() 错误，模型将无法切片。您可以调整此数值，直到不再出现该错误。" msgid "Displacement" msgstr "位移" @@ -16901,9 +17736,11 @@ msgstr "挤出" msgid "Combined" msgstr "合并" +# AI Translated msgid "Fuzzy skin noise type" -msgstr "绒毛噪波类型" +msgstr "绒毛表面噪波类型" +# AI Translated msgid "" "Noise type to use for fuzzy skin generation:\n" "Classic: Classic uniform random noise.\n" @@ -16913,13 +17750,13 @@ msgid "" "Voronoi: Divides the surface into voronoi cells, and displaces each one by a random amount. Creates a patchwork texture.\n" "Ripple: Uniform ripple pattern that ripples left and right of the original path. Repeating pattern, woven appearance." msgstr "" -"用于生成绒毛表面的噪声类型：\n" -"Classic：经典的均匀随机噪声。\n" -"Perlin：柏林噪声，可产生更一致的纹理。\n" -"Billow：类似柏林噪声，但更成团块状。\n" -"Ridged Multifractal：具有尖锐、锯齿状特征的脊状噪声。可生成大理石般的纹理。\n" -"Voronoi：将表面划分为 Voronoi 单元，并将每个单元随机位移一定量。可生成拼接状纹理。\n" -"Ripple：在原始路径左右起伏的均匀波纹图案。重复图案，呈编织外观。" +"用于生成绒毛表面的噪波类型：\n" +"经典：经典的均匀随机噪波。\n" +"柏林噪波：可产生更一致的纹理。\n" +"云状噪波：类似柏林噪波，但更成团块状。\n" +"脊状多重分形：具有尖锐、锯齿状特征的脊状噪波，可生成大理石般的纹理。\n" +"维诺图：将表面划分为维诺单元，并将每个单元随机位移一定量，可生成拼接状纹理。\n" +"波纹：在原始路径左右起伏的均匀波纹图案。图案重复，呈编织外观。" msgid "Classic" msgstr "经典" @@ -16945,17 +17782,20 @@ msgstr "绒毛表面特征尺寸" msgid "The base size of the coherent noise features, in mm. Higher values will result in larger features." msgstr "相干噪波特征的基础尺寸（单位：毫米）。较高的数值会产生更大的特征。" +# AI Translated msgid "Fuzzy Skin Noise Octaves" -msgstr "绒毛噪波倍频" +msgstr "绒毛表面噪波倍频" msgid "The number of octaves of coherent noise to use. Higher values increase the detail of the noise, but also increase computation time." msgstr "使用的相干噪波倍频数。较高的数值会增加噪波细节，但也会增加计算时间。" +# AI Translated msgid "Fuzzy skin noise persistence" -msgstr "绒毛噪波持续性" +msgstr "绒毛表面噪波持续性" +# AI Translated msgid "The decay rate for higher octaves of the coherent noise. Lower values will result in smoother noise." -msgstr "相干噪波高倍频的衰减速率。较低的数值会产生更平滑的噪声。" +msgstr "相干噪波高倍频的衰减速率。较低的数值会产生更平滑的噪波。" msgid "Number of ripples per layer" msgstr "每层的波纹数量" @@ -17001,11 +17841,13 @@ msgstr "忽略微小间隙" msgid "Layers and Perimeters" msgstr "层和墙" +# AI Translated msgid "Don't print gap fill with a length is smaller than the threshold specified (in mm). This setting applies to top, bottom and solid infill and, if using the classic perimeter generator, to wall gap fill." -msgstr "不要打印长度小于指定阈值（以毫米为单位）的间隙填充。此设置适用于顶部、底部和实体填充，如果使用经典周长生成器，则适用于墙壁间隙填充。" +msgstr "不打印长度小于指定阈值（单位为毫米）的缝隙填充。此设置适用于顶部、底部和实心填充；如果使用经典墙生成器，也适用于墙间缝隙填充。" +# AI Translated msgid "This is the speed for gap infill. Gaps usually have irregular line width and should be printed more slowly." -msgstr "填缝的速度。缝隙通常有不一致的线宽，应改用较慢速度打印。" +msgstr "缝隙填充的速度。缝隙通常线宽不一致，应以较慢速度打印。" msgid "Precise Z height" msgstr "精准 Z 高度" @@ -17016,14 +17858,15 @@ msgstr "开启这个设置，对象在切片后将得到精准的 Z 高度。此 msgid "Arc fitting" msgstr "圆弧拟合" +# AI Translated msgid "" "Enable this to get a G-code file which has G2 and G3 moves. The fitting tolerance is same as the resolution.\n" "\n" "Note: For Klipper machines, this option is recommended to be disabled. Klipper does not benefit from arc commands as these are split again into line segments by the firmware. This results in a reduction in surface quality as line segments are converted to arcs by the slicer and then back to line segments by the firmware." msgstr "" -"启用后，导出的 G-code 将包含 G2 和 G3 指令。圆弧拟合的公差将与精度相同。\n" -"请注意：对于使用Klipper固件的打印机，建议禁用此选项。Klipper固件不会从圆弧拟合中受益，因为此命令会被固件再次分割为线段。\n" -"在切片软件将线段转换为圆弧后，若再被固件转换为线段，将导致打印件表面质量下降。" +"启用后，导出的 G-code 将包含 G2 和 G3 指令。圆弧拟合的公差与分辨率相同。\n" +"\n" +"请注意：对于使用 Klipper 固件的打印机，建议禁用此选项。Klipper 不会从圆弧指令中受益，因为固件会再次将其分割为线段。切片软件将线段转换为圆弧后，固件又将其转换回线段，会导致表面质量下降。" msgid "Add line number" msgstr "标注行号" @@ -17092,11 +17935,13 @@ msgstr "Delta（三角）" msgid "Best object position" msgstr "最佳对象位置" +# AI Translated msgid "Best auto arranging position in range [0,1] w.r.t. bed shape." -msgstr "最佳自动排列位置在[0,1]范围内，相对于打印床形状。" +msgstr "自动摆放的最佳位置，取值范围为 [0,1]，相对于热床形状。" +# AI Translated msgid "Enable this option if machine has auxiliary part cooling fan. G-code command: M106 P2 S(0-255)." -msgstr "如果打印机有辅助风扇，可以开启此选项。G-code指令：M106 P2 S(0-255)" +msgstr "如果打印机有辅助部件冷却风扇，可以开启此选项。G-code指令：M106 P2 S(0-255)。" # AI Translated msgid "Fan direction" @@ -17110,14 +17955,16 @@ msgstr "打印机的冷却风扇方向" msgid "Both" msgstr "两者" +# AI Translated msgid "" "Start the fan this number of seconds earlier than its target start time (you can use fractional seconds). It assumes infinite acceleration for this time estimation, and will only take into account G1 and G0 moves (arc fitting is unsupported).\n" "It won't move fan commands from custom G-code (they act as a sort of 'barrier').\n" "It won't move fan commands into the start G-code if the 'only custom start G-code' is activated.\n" "Use 0 to deactivate." msgstr "" -"提前一定秒数启动风扇（可使用小数），且不考虑加速度，仅考虑 G1 和 G0 移动命令（不支持弧线拟合）。\n" -"此功能不会移动自定义命令中的G-code，而是以屏蔽方式工作，就算启用了“仅自定义启动 G-code”，它也不会将风扇命令移动至启动G-code中。\n" +"提前此秒数启动风扇（可使用小数）。此时间估算假定加速度无限大，且仅考虑 G1 和 G0 移动（不支持圆弧拟合）。\n" +"它不会移动自定义 G-code 中的风扇命令（这些命令相当于一道“屏障”）。\n" +"如果启用了“仅自定义起始 G-code”，它不会将风扇命令移动到起始 G-code 中。\n" "设为 0 以禁用。" msgid "Only overhangs" @@ -17126,8 +17973,9 @@ msgstr "仅悬垂" msgid "Will only take into account the delay for the cooling of overhangs." msgstr "仅对悬垂有效" +# AI Translated msgid "Fan kick-start time" -msgstr "风扇" +msgstr "风扇全速启动时间" msgid "" "Emit a max fan speed command for this amount of seconds before reducing to target speed to kick-start the cooling fan.\n" @@ -17156,16 +18004,21 @@ msgstr "耗时" msgid "The printer cost per hour." msgstr "打印机每小时运行成本" +# AI Translated msgid "money/h" -msgstr "钱/时" +msgstr "金额/h" +# AI Translated msgid "Support controlling chamber temperature" -msgstr "支持仓温控制" +msgstr "支持腔体温度控制" +# AI Translated msgid "" "This option is enabled if machine support controlling chamber temperature\n" "G-code command: M141 S(0-255)" -msgstr "此选项会开启打印机的打印室温度控制（若有的话）。G-code命令：M141 S(0-255)" +msgstr "" +"如果打印机支持控制腔体温度，请启用此选项\n" +"G-code命令：M141 S(0-255)" msgid "Support air filtration" msgstr "支持空气过滤" @@ -17180,14 +18033,16 @@ msgstr "" msgid "Use cooling filter" msgstr "开启冷却过滤" +# AI Translated msgid "Enable this if printer support cooling filter" -msgstr "开启该功能后，当腔温过高时，会自动关闭过滤以提高冷却效果" +msgstr "如果打印机支持冷却过滤，请启用此选项" msgid "G-code flavor" msgstr "G-code风格" +# AI Translated msgid "What kind of G-code the printer is compatible with." -msgstr "打印机兼容的G-code风格'" +msgstr "打印机兼容的G-code风格。" # AI Translated msgid "Marlin (legacy)" @@ -17210,17 +18065,20 @@ msgstr "颗粒改装打印机" msgid "Enable this option if your printer uses pellets instead of filaments." msgstr "如果您的打印机使用颗粒而不是耗材丝，请启用此选项" +# AI Translated msgid "Support multi bed types" -msgstr "支持多种打印床类型" +msgstr "支持多种热床类型" +# AI Translated msgid "Enable this option if you want to use multiple bed types." -msgstr "如果要使用多种打印床类型，请启用此选项" +msgstr "如果要使用多种热床类型，请启用此选项。" msgid "Label objects" msgstr "标注模型" +# AI Translated msgid "Enable this to add comments into the G-code labeling print moves with what object they belong to, which is useful for the Octoprint CancelObject plug-in. This setting is NOT compatible with Single Extruder Multi Material setup and Wipe into Object / Wipe into Infill." -msgstr "启用此选项，将在G-code中添加注释，标记打印移动属于哪个对象，这对Octoprint CancelObject插件非常有用。此设置与单挤出机多材料设置和擦拭到对象/擦拭到填充不兼容。" +msgstr "启用此选项，将在G-code中添加注释，标记打印移动属于哪个对象，这对Octoprint CancelObject插件非常有用。此设置与“单挤出机多材料”设置以及“冲刷到这个对象”/“冲刷到对象的填充”不兼容。" msgid "Exclude objects" msgstr "对象排除" @@ -17249,14 +18107,16 @@ msgstr "此参数为每层填充添加轻微的位移以创建十字纹理。" msgid "Sparse infill rotation template" msgstr "稀疏填充旋转模板" +# AI Translated msgid "Rotate the sparse infill direction per layer using a template of angles. Enter comma-separated degrees (e.g., '0,30,60,90'). Angles are applied in order by layer and repeat when the list ends. Advanced syntax is supported: '+5' rotates +5° every layer; '+5#5' rotates +5° every 5 layers. See the Wiki for details. When a template is set, the standard infill direction setting is ignored. Note: some infill patterns (e.g., Gyroid) control rotation themselves; use with care." -msgstr "使用角度模板旋转每层的稀疏填充方向。输入以逗号分隔的度数（例如“0,30,60,90”）。角度按层顺序应用，并在列表结束时重复。支持高级语法：“+5”每层旋转+5°； ‘+5#5’每 5 层旋转+5°。详细信息请参阅维基百科。设置模板后，将忽略标准填充方向设置。注意：一些填充图案（例如 Gyroid）本身控制旋转；小心使用。" +msgstr "使用角度模板逐层旋转稀疏填充方向。输入以逗号分隔的角度（例如 '0,30,60,90'）。角度按层依次应用，列表结束后重复。支持高级语法：'+5' 表示每层旋转 +5°；'+5#5' 表示每 5 层旋转 +5°。详情请参阅 Wiki。设置模板后，将忽略标准的填充方向设置。注意：某些填充图案（例如螺旋体）会自行控制旋转，请谨慎使用。" msgid "Solid infill rotation template" msgstr "实心填充旋转模板" +# AI Translated msgid "This parameter adds a rotation of solid infill direction to each layer according to the specified template. The template is a comma-separated list of angles in degrees, e.g. '0,90'. The first angle is applied to the first layer, the second angle to the second layer, and so on. If there are more layers than angles, the angles will be repeated. Note that not all solid infill patterns support rotation." -msgstr "该参数根据指定的模板为每个图层添加实体填充方向的旋转。该模板是一个以逗号分隔的角度列表，以度为单位，例如'0,90'。第一个角度应用于第一层，第二个角度应用于第二层，依此类推。如果层数多于角度，则角度将重复。请注意，并非所有实心填充图案都支持旋转。" +msgstr "该参数根据指定的模板为每层添加实心填充方向的旋转。该模板是一个以逗号分隔的角度列表，以度为单位，例如'0,90'。第一个角度应用于第一层，第二个角度应用于第二层，依此类推。如果层数多于角度，则角度将重复。请注意，并非所有实心填充图案都支持旋转。" msgid "Skeleton infill density" msgstr "骨架填充密度" @@ -17264,29 +18124,36 @@ msgstr "骨架填充密度" msgid "The remaining part of the model contour after removing a certain depth from the surface is called the skeleton. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skeleton densities, their skeleton areas will develop overlapping sections. Default is as same as infill density." msgstr "模型轮廓从表面去除一定深度后剩余的部分称为骨架。该参数用于调整该部分的密度。当两个区域具有相同的稀疏填充设置但不同的骨架密度时，它们的骨架区域将产生重叠部分。默认值与填充密度相同。" +# AI Translated msgid "Skin infill density" -msgstr "外壳填充密度" +msgstr "表皮填充密度" +# AI Translated msgid "The portion of the model's outer surface within a certain depth range is called the skin. This parameter is used to adjust the density of this section. When two regions have the same sparse infill settings but different skin densities, this area will not be split into two separate regions. Default is as same as infill density." -msgstr "模型外表面在一定深度范围内的部分称为蒙皮。该参数用于调整该部分的密度。当两个区域具有相同的稀疏填充设置但不同的蒙皮密度时，该区域不会被分割为两个单独的区域。默认值与填充密度相同。" +msgstr "模型外表面在一定深度范围内的部分称为表皮。该参数用于调整该部分的密度。当两个区域具有相同的稀疏填充设置但不同的表皮密度时，该区域不会被分割为两个单独的区域。默认值与填充密度相同。" +# AI Translated msgid "Skin infill depth" -msgstr "外壳填充深度" +msgstr "表皮填充深度" +# AI Translated msgid "The parameter sets the depth of skin." -msgstr "该参数设置外壳深度" +msgstr "该参数设置表皮深度。" msgid "Infill lock depth" msgstr "填充锁定深度" +# AI Translated msgid "The parameter sets the overlapping depth between the interior and skin." -msgstr "该参数设置内部与外壳之间的重叠深度" +msgstr "该参数设置内部与表皮之间的重叠深度。" +# AI Translated msgid "Skin line width" -msgstr "外壳线宽" +msgstr "表皮线宽" +# AI Translated msgid "Adjust the line width of the selected skin paths." -msgstr "调整选中外壳路径的线宽" +msgstr "调整选中表皮路径的线宽。" msgid "Skeleton line width" msgstr "骨架线宽" @@ -17308,9 +18175,11 @@ msgstr "填满图案顶部" msgid "Choose this option if you want to completely fill in the tops of the infill pattern" msgstr "如果希望将填充图案的顶部完全填满，请选择此选项" +# AI Translated msgid "Infill combination - Max layer height" -msgstr "填充组合 - 最大层高" +msgstr "合并填充 - 最大层高" +# AI Translated msgid "" "Maximum layer height for the combined sparse infill.\n" "\n" @@ -17320,22 +18189,24 @@ msgid "" "\n" "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values (eg 80%). This value must not be larger than the nozzle diameter." msgstr "" -"组合稀疏填充的最大层高。\n" +"合并稀疏填充的最大层高。\n" "\n" "设置为 0 或 100% 使用喷嘴直径（以最大程度减少打印时间），或设置为约 80% 以最大化稀疏填充强度。\n" "\n" -"填充组合的层数是通过将此值除以层高并向下取整得出的。\n" +"合并填充的层数是通过将此值除以层高并向下取整得出的。\n" "\n" -"可以使用绝对 mm 值（例如 0.4mm 喷嘴使用 0.32mm）或百分比值（例如 80%）。此值不得大于喷嘴直径。" +"可以使用绝对 mm 值（例如 0.4mm 喷嘴使用 0.32mm）或 % 值（例如 80%）。此值不得大于喷嘴直径。" msgid "Enable clumping detection" msgstr "启用结块检测" +# AI Translated msgid "Clumping detection layers" -msgstr "结块监测层数" +msgstr "结块检测层数" +# AI Translated msgid "Clumping detection layers." -msgstr "结块监测层数" +msgstr "结块检测层数。" msgid "Probing exclude area of clumping" msgstr "结块检测排除区域" @@ -17346,14 +18217,16 @@ msgstr "结块检测排除区域" msgid "Lateral lattice angle 1" msgstr "侧向晶格角度1" +# AI Translated msgid "The angle of the first set of Lateral lattice elements in the Z direction. Zero is vertical." -msgstr "第一组二维晶格单元在Z方向的角度。零表示垂直。" +msgstr "第一组侧向晶格单元在Z方向的角度。零表示垂直。" msgid "Lateral lattice angle 2" msgstr "侧向晶格角度2" +# AI Translated msgid "The angle of the second set of Lateral lattice elements in the Z direction. Zero is vertical." -msgstr "第二组二维晶格单元在Z方向的角度。零表示垂直。" +msgstr "第二组侧向晶格单元在Z方向的角度。零表示垂直。" msgid "Infill overhang angle" msgstr "填充悬垂角度" @@ -17386,13 +18259,17 @@ msgstr "用于简化闪电分支的最大拉直角度。" msgid "Sparse infill anchor length" msgstr "稀疏填充锚线长度" +# AI Translated msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than infill_anchor_max is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to this parameter, but no longer than anchor_length_max.\n" "Set this parameter to zero to disable anchoring perimeters connected to a single infill line." -msgstr "用附加周长的一小段将填充线连接到内部周长。如果以百分比（例如：15%）表示，则计算填充拉伸宽度。OrcaSlicer 试图将两条紧密的填充线连接到一个短的周长段。如果找不到短于“填充”和“锚点”最大值的周长线段，则填充线仅在一侧连接到周长线段，并且所取周长线段的长度仅限于此参数，但不超过“锚点长度”最大值。将此参数设置为零，以禁用连接到单个填充线的锚点周长。" +msgstr "" +"用一小段附加的墙将填充线连接到内墙。如果以百分比表示（例如：15%），则根据填充线宽计算。Orca Slicer 会尝试用一小段墙将两条相邻的填充线连接起来。如果找不到短于 infill_anchor_max 的墙段，则填充线只在一侧连接到墙段，所取墙段的长度限制为此参数，但不超过 anchor_length_max。\n" +"将此参数设为零，即可禁用连接到单条填充线的锚定墙。" +# AI Translated msgid "0 (no open anchors)" -msgstr "0 (无锚线)" +msgstr "0（无开放锚线）" msgid "1000 (unlimited)" msgstr "1000（无限制）" @@ -17400,31 +18277,37 @@ msgstr "1000（无限制）" msgid "Maximum length of the infill anchor" msgstr "填充锚线的最大长度" +# AI Translated msgid "" "Connect an infill line to an internal perimeter with a short segment of an additional perimeter. If expressed as percentage (example: 15%) it is calculated over infill extrusion width. Orca Slicer tries to connect two close infill lines to a short perimeter segment. If no such perimeter segment shorter than this parameter is found, the infill line is connected to a perimeter segment at just one side and the length of the perimeter segment taken is limited to infill_anchor, but no longer than this parameter.\n" "If set to 0, the old algorithm for infill connection will be used, it should create the same result as with 1000 & 0." -msgstr "用附加周长的一小段将填充线连接到内部周长。如果以百分比（例如：15%）表示，则计算填充拉伸宽度。OrcaSlicer 试图将两条紧密的填充线连接到一个短的周长段。如果找不到比此参数短的周长线段，则填充线仅在一侧连接到周长线段，并且所采用的周长线段的长度仅限于 infl_anchor，但不超过此参数。将此参数设置为零以禁用锚点。" +msgstr "" +"用一小段附加的墙将填充线连接到内墙。如果以百分比表示（例如：15%），则根据填充线宽计算。Orca Slicer 会尝试用一小段墙将两条相邻的填充线连接起来。如果找不到短于此参数的墙段，则填充线只在一侧连接到墙段，所取墙段的长度限制为 infill_anchor，但不超过此参数。\n" +"如果设为 0，将使用旧的填充连接算法，其结果应与设为 1000 和 0 时相同。" msgid "0 (Simple connect)" msgstr "0（简单连接）" +# AI Translated msgid "" "Filament to print internal sparse infill.\n" "\"Default\" uses the active object/part filament." msgstr "" -"用于打印内部稀疏填充的耗材。\n" -"“默认”使用当前对象/零件的耗材。" +"用于打印内部稀疏填充的耗材丝。\n" +"“默认”使用当前对象/零件的耗材丝。" +# AI Translated msgid "Line width of internal sparse infill. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "内部稀疏填充的线宽。如果以%表示，它将基于喷嘴直径来计算。" +msgstr "内部稀疏填充的线宽。如果以%表示，将根据喷嘴直径计算。" +# AI Translated msgid "Infill/wall overlap" -msgstr "填充/墙 重叠" +msgstr "填充/墙重叠" # AI Translated #, no-c-format, no-boost-format msgid "This allows the infill area to be enlarged slightly to overlap with walls for better bonding. The percentage value is relative to the inner wall line width. Set this value to ~10-15% to minimize potential over extrusion and accumulation of material resulting in rough top surfaces." -msgstr "填充区域略微扩大以与墙壁重叠，以获得更好的粘合。百分比值相对于内墙线宽。将此值设置为约10-15%，以最小化潜在的过挤出和材料积累，从而导致顶部表面粗糙。" +msgstr "此设置使填充区域略微扩大，与墙重叠以获得更好的粘合。百分比值相对于内墙线宽。建议将此值设为约10-15%，以尽量减少可能出现的过挤出和材料堆积，避免顶面粗糙。" msgid "Top/Bottom solid infill/wall overlap" msgstr "顶/底部实心填充/墙重叠率" @@ -17432,7 +18315,7 @@ msgstr "顶/底部实心填充/墙重叠率" # AI Translated #, no-c-format, no-boost-format msgid "Top solid infill area is enlarged slightly to overlap with wall for better bonding and to minimize the appearance of pinholes where the top infill meets the walls. A value of 25-30% is a good starting point, minimizing the appearance of pinholes. The percentage value is relative to the inner wall line width." -msgstr "顶部实心填充区域略微扩大，以便与墙壁重叠，以获得更好的粘合，并减少顶部填充与墙壁相接处的小孔出现。25-30%的值是一个很好的起点，可以减少小孔的出现。百分比值相对于内墙线宽。" +msgstr "顶部实心填充区域略微扩大，以便与墙重叠，以获得更好的粘合，并减少顶部填充与墙相接处的小孔出现。25-30%的值是一个很好的起点，可以减少小孔的出现。百分比值相对于内墙线宽。" msgid "This is the speed for internal sparse infill." msgstr "内部稀疏填充的打印速度" @@ -17455,18 +18338,20 @@ msgstr "分段区域的最大宽度" msgid "Maximum width of a segmented region. A value of 0 disables this feature." msgstr "分段区域的最大宽度。将其设置为零会禁用此功能。" +# AI Translated msgid "Interlocking depth of a segmented region" -msgstr "分割区域的交错深度" +msgstr "分段区域的互锁深度" # AI Translated msgid "Interlocking depth of a segmented region. On every other layer, the segmented region is limited to this depth. It will be ignored if \"interlocking_beam\" is enabled. Zero disables this feature." -msgstr "分割区域的交错深度。每隔一层，分割区域将被限制在此深度内。如果启用了 \"interlocking_beam\"，则将被忽略。零将禁用此功能。" +msgstr "分段区域的互锁深度。每隔一层，分段区域将被限制在此深度内。如果启用了 \"interlocking_beam\"，则将被忽略。零将禁用此功能。" msgid "Use beam interlocking" msgstr "启用互锁梁" +# AI Translated msgid "Generate interlocking beam structure at the locations where different filaments touch. This improves the adhesion between filaments, especially models printed in different materials." -msgstr "在不同耗材接触的位置生成互锁梁结构。这改善了耗材之间的粘合性，特别是使用不同材料打印的模型。" +msgstr "在不同耗材丝接触的位置生成互锁梁结构。这改善了耗材丝之间的粘合性，特别是使用不同材料打印的模型。" msgid "Interlocking beam width" msgstr "互锁梁宽度" @@ -17489,8 +18374,9 @@ msgstr "互锁结构梁的高度，以层数为单位。较少的层更强，但 msgid "Interlocking depth" msgstr "互锁深度" +# AI Translated msgid "The distance from the boundary between filaments to generate interlocking structure, measured in cells. Too few cells will result in poor adhesion." -msgstr "从耗材边界生成互锁结构的距离，以单元格为单位。太少的单元格将导致粘合不良。" +msgstr "从耗材丝边界生成互锁结构的距离，以单元格为单位。太少的单元格将导致粘合不良。" msgid "Interlocking boundary avoidance" msgstr "互锁与边界的留白量" @@ -17501,14 +18387,16 @@ msgstr "模型边框与互锁结构的距离，以单元格为单位。" msgid "Ironing type" msgstr "熨烫类型" +# AI Translated msgid "Ironing uses a small flow to print at the same height of a surface to make flat surfaces smoother. This setting controls which layers are being ironed." -msgstr "熨烫指的是使用小流量在表面的同高度打印，进而是的平面更加光滑。这个设置用于设置哪些层进行熨烫。" +msgstr "熨烫指的是使用小流量在表面的同高度打印，进而使得平面更加光滑。这个设置用于设置哪些层进行熨烫。" msgid "No ironing" msgstr "不熨烫" +# AI Translated msgid "All top surfaces" -msgstr "顶面" +msgstr "所有顶面" msgid "Topmost surface only" msgstr "最顶面" @@ -17568,8 +18456,8 @@ msgid "" "Affects perimeters with a slope greater than this angle (degrees).\n" "A reasonable value is 35. Set to 0 to disable." msgstr "" -"降低顶面墙壁的高度，使其与模型边缘高度相匹配。\n" -"影响坡度大于此角度（度）的墙壁。\n" +"降低顶面墙的高度，使其与模型边缘高度相匹配。\n" +"影响坡度大于此角度（度）的墙。\n" "合理的取值为 35。设置为 0 以禁用。" msgid "Don't alternate fill direction" @@ -17711,12 +18599,13 @@ msgstr "E轴最大抖动" msgid "Maximum Junction Deviation" msgstr "最大结点偏差" +# AI Translated msgid "" "Maximum junction deviation (M205 J, only apply if JD > 0 for Marlin Firmware\n" "If your Marlin 2 printer uses Classic Jerk set this value to 0.)" msgstr "" -"最大连接偏差（M205 J，仅当 JD > 0 对于 Marlin 固件时适用\n" -"如果您的 Marlin 2 打印机使用 Classic Jerk，请将此值设置为 0。）" +"最大结点偏差（M205 J，仅在 JD > 0 时适用于 Marlin 固件\n" +"如果您的 Marlin 2 打印机使用经典抖动（Classic Jerk），请将此值设为 0。）" msgid "Minimum speed for extruding" msgstr "最小挤出速度" @@ -17785,12 +18674,13 @@ msgstr "最大空驶加速度（M204 T），仅适用于Marlin 2" msgid "Resonance avoidance" msgstr "共振规避" +# AI Translated msgid "" "By reducing the speed of the outer wall to avoid the resonance zone of the printer, ringing on the surface of the model are avoided.\n" "Please turn this option off when testing ringing." msgstr "" -"通过降低外壁的速度以避开打印机的共振区，可以避免模型表面产生振稳。\n" -"在测试振稳时，请关闭此选项。" +"通过降低外墙速度以避开打印机的共振区，可以避免模型表面产生振纹。\n" +"在测试振纹时，请关闭此选项。" msgid "Min" msgstr "最小" @@ -17804,8 +18694,9 @@ msgstr "最大" msgid "Maximum speed of resonance avoidance." msgstr "共振规避的最大速度。" +# AI Translated msgid "Emit input shaping" -msgstr "输出输入整形" +msgstr "写入输入整形参数" msgid "" "Override firmware input shaping settings.\n" @@ -17911,6 +18802,7 @@ msgstr "挤出机的最高可打印层高度。用于限制启用自适应层高 msgid "Extrusion rate smoothing" msgstr "平滑挤出率" +# AI Translated msgid "" "This parameter smooths out sudden extrusion rate changes that happen when the printer transitions from printing a high flow (high speed/larger width) extrusion to a lower flow (lower speed/smaller width) extrusion and vice versa.\n" "\n" @@ -17926,18 +18818,19 @@ msgid "" "\n" "Note: this parameter disables arc fitting." msgstr "" -"此参数是打印机从打印高流量挤出（高速/较大宽度）向低流量挤出（低速/较小宽度）时用于突然变化挤出速率的平滑，反之亦然。\n" -"它定义了挤出体积流量（mm³/s）随时间变化的最大速率。更高的值意味着允许更高的挤出速率变化，从而产生更快速的过渡。\n" +"此参数用于平滑打印机从高流量（高速/较大线宽）挤出切换到低流量（低速/较小线宽）挤出时（反之亦然）出现的挤出速率突变。\n" +"\n" +"它定义了挤出体积流量（mm³/s）随时间变化的最大速率。值越高，允许的挤出速率变化越大，速度过渡也就越快。\n" "\n" "值为0将禁用该功能。\n" "\n" -"对于高速、高流量的近程挤出机（如Bambu或Voron）通常不需要该值。但是，在特征速度变化很大的某些情况下，它可以提供一些边际收益。例如，当由于悬垂而出现严重的减速时。在这些情况下，建议使用一个大的值大约300-350 mm³/s²的，因为这刚好允许足够的平滑，以帮助 Pressure Advance 实现更平滑的流量过渡。\n" +"对于高速、高流量的近程挤出机打印机（如 Bambu Lab 或 Voron），通常不需要此值。但在特征速度变化很大的某些情况下（例如因悬垂而大幅减速时），它可以带来一些边际收益。在这些情况下，建议使用约 300-350 mm³/s² 的较高值，这样恰好能提供足够的平滑，帮助 Pressure Advance 实现更平滑的流量过渡。\n" "\n" -"对于没有 Pressure Advance 的较慢打印机，该值应该设置得非常低。对于近程挤出机来说10-15 mm³/s²是一个很好值的起点，而对于远程挤出机来说是5-10 mm³/s²。\n" +"对于没有 Pressure Advance 的较慢打印机，该值应设置得低得多。对于近程挤出机，10-15 mm³/s² 是一个很好的起点；对于远程挤出机，则为 5-10 mm³/s²。\n" "\n" -"这个功能在Prusa切片机中被称为压力均衡器。\n" +"此功能在 PrusaSlicer 中称为 Pressure Equalizer（压力均衡器）。\n" "\n" -"注意：此参数禁用圆弧拟合。" +"注意：此参数会禁用圆弧拟合。" msgid "mm³/s²" msgstr "mm³/s²" @@ -17945,29 +18838,37 @@ msgstr "mm³/s²" msgid "Smoothing segment length" msgstr "平滑段长度" +# AI Translated msgid "" "A lower value results in smoother extrusion rate transitions. However, this results in a significantly larger G-code file and more instructions for the printer to process.\n" "\n" "Default value of 3 works well for most cases. If your printer is stuttering, increase this value to reduce the number of adjustments made.\n" "\n" "Allowed values: 0.5-5" -msgstr "值越低，挤出速率过渡越平滑。然而，这会导致 G-code 文件变得更大，并且打印机需要处理更多指令。 默认值 3 适用于大多数情况。如果您的打印机出现卡顿，请增加该值以减少调整次数。 允许值：0.5-5" +msgstr "" +"值越低，挤出速率过渡越平滑。但这会使 G-code 文件明显变大，打印机也需要处理更多指令。\n" +"\n" +"默认值 3 适用于大多数情况。如果打印机出现卡顿，请增大该值以减少调整次数。\n" +"\n" +"允许值：0.5-5" msgid "Apply only on external features" msgstr "仅应用于外部特征" +# AI Translated msgid "Applies extrusion rate smoothing only on external perimeters and overhangs. This can help reduce artefacts due to sharp speed transitions on externally visible overhangs without impacting the print speed of features that will not be visible to the user." -msgstr "仅对外周和悬伸应用挤出速率平滑。这有助于减少由于外部可见突出部分上的急剧速度过渡而导致的伪影，而不会影响用户不可见的特征的打印速度。" +msgstr "仅对外墙和悬垂应用挤出速率平滑。这有助于减少外部可见悬垂上因速度急剧变化而产生的瑕疵，同时不影响用户看不到的特征的打印速度。" msgid "Minimum speed for part cooling fan." msgstr "部件冷却风扇的最小转速" +# AI Translated msgid "" "Speed of auxiliary part cooling fan. Auxiliary fan will run at this speed during printing except the first several layers which is defined by no cooling layers.\n" "Please enable auxiliary_fan in printer settings to use this feature. G-code command: M106 P2 S(0-255)" msgstr "" "辅助部件冷却风扇的转速。辅助部件冷却风扇将一直运行在该速度，除了设置的无需冷却的前若干层\n" -"请在打印机设置中启用辅助风扇以使用此功能。G-code指令：M106 P2 S(0-255)" +"请在打印机设置中启用“辅助部件冷却风扇”以使用此功能。G-code指令：M106 P2 S(0-255)" msgid "For the first" msgstr "在最初的" @@ -18000,8 +18901,9 @@ msgstr "喷嘴直径" msgid "Configuration notes" msgstr "配置注释" +# AI Translated msgid "You can put here your personal notes. This text will be added to the G-code header comments." -msgstr "你可以把你的个人注释放在这里。该文本将添加到G-code首部注释中。" +msgstr "您可以把您的个人注释放在这里。该文本将添加到G-code首部注释中。" msgid "Host Type" msgstr "主机类型" @@ -18018,32 +18920,39 @@ msgstr "从切刀位置到喷嘴尖端的内腔体积" msgid "Cooling tube position" msgstr "喉管位置" +# AI Translated msgid "Distance of the center-point of the cooling tube from the extruder tip." -msgstr "喉管的中心点与挤出机齿尖的距离。" +msgstr "喉管中心点与喷嘴尖端的距离。" msgid "Cooling tube length" msgstr "喉管长度" +# AI Translated msgid "Length of the cooling tube to limit space for cooling moves inside it." -msgstr "喉管的长度，用于限制冷却内部移动的空间。" +msgstr "喉管的长度，用于限制在其内部进行冷却移动的空间。" +# AI Translated msgid "High extruder current on filament swap" -msgstr "更换耗材挤出机大电流" +msgstr "更换耗材丝挤出机大电流" +# AI Translated msgid "It may be beneficial to increase the extruder motor current during the filament exchange sequence to allow for rapid ramming feed rates and to overcome resistance when loading a filament with an ugly shaped tip." -msgstr "可能有益于换耗材过程中增加挤出机电流，克服加载耗材时的阻力以加快尖端成型进料速率从而避免产生难看形状的尖端。" +msgstr "在耗材丝更换过程中提高挤出机电机电流可能有益，这样可以实现快速的尖端成型进料速率，并在装载尖端形状不佳的耗材丝时克服阻力。" +# AI Translated msgid "Filament parking position" -msgstr "耗材停靠位置" +msgstr "耗材丝停靠位置" +# AI Translated msgid "Distance of the extruder tip from the position where the filament is parked when unloaded. This should match the value in printer firmware." -msgstr "卸载时，挤出机齿尖与耗材停放位置的距离。这应该与打印机固件中的值相匹配。" +msgstr "卸载时，耗材丝停放位置与喷嘴尖端的距离。该值应与打印机固件中的值一致。" msgid "Extra loading distance" msgstr "额外加载距离" +# AI Translated msgid "When set to zero, the distance the filament is moved from parking position during load is exactly the same as it was moved back during unload. When positive, it is loaded further, if negative, the loading move is shorter than unloading." -msgstr "当设置为零时，耗材的加载移动与卸载移动的距离相同。如果为正，加载比卸载长。如果为负，加载比卸载短。" +msgstr "当设置为零时，耗材丝的加载移动与卸载移动的距离相同。如果为正，加载比卸载长。如果为负，加载比卸载短。" msgid "Start end points" msgstr "起始终止点" @@ -18054,11 +18963,13 @@ msgstr "从切割区域到垃圾桶的起始和结束点。" msgid "Reduce infill retraction" msgstr "减小填充回抽" +# AI Translated msgid "Don't retract when the travel is entirely within an infill area. That means the oozing can't been seen. This can reduce times of retraction for complex model and save printing time, but make slicing and G-code generating slower. Note that Z-hop is also not performed in areas where retraction is skipped." -msgstr "当空驶完全在填充区域内时不触发回抽。这意味着即使漏料也是不可见的。对于复杂模型，该设置能够减少回抽次数以及打印时长，但是会造成G-code生成变慢" +msgstr "当空驶完全在填充区域内时不触发回抽。这意味着即使渗料也看不到。对于复杂模型，该设置能够减少回抽次数以及打印时长，但是会造成切片和G-code生成变慢。请注意，在跳过回抽的区域也不会执行Z抬升。" +# AI Translated msgid "This option will drop the temperature of the inactive extruders to prevent oozing." -msgstr "此选项将降低非活动挤出机的温度，以防止渗出。" +msgstr "此选项将降低非活动挤出机的温度，以防止渗料。" msgid "Filename format" msgstr "文件名格式" @@ -18069,8 +18980,9 @@ msgstr "用户可以自定义导出项目文件的名称。" msgid "Make overhangs printable" msgstr "悬垂可打印化" +# AI Translated msgid "Modify the geometry to print overhangs without support material." -msgstr "修改几何形状使得悬垂部分无需支撑材料或者搭桥打印。" +msgstr "修改几何形状，使悬垂部分无需支撑材料即可打印。" msgid "Make overhangs printable - Maximum angle" msgstr "悬垂可打印化的最大角度" @@ -18078,14 +18990,16 @@ msgstr "悬垂可打印化的最大角度" msgid "Maximum angle of overhangs to allow after making more steep overhangs printable.90° will not change the model at all and allow any overhang, while 0 will replace all overhangs with conical material." msgstr "在使悬垂可打印化后，允许的悬垂最大角度。90°将完全不改变模型并允许任何悬垂，而0°将用圆锥形材料替换所有悬垂部分。" +# AI Translated msgid "Make overhangs printable - Hole area" -msgstr "最大孔洞面积" +msgstr "悬垂可打印化的孔洞面积" msgid "Maximum area of a hole in the base of the model before it's filled by conical material. A value of 0 will fill all the holes in the model base." msgstr "模型底部的孔洞在被圆锥形材料填充前所允许的最大面积。值为0将填充模型底部的所有孔洞。" +# AI Translated msgid "Detect overhang walls" -msgstr "识别悬垂外墙" +msgstr "识别悬垂墙" #, c-format, boost-format msgid "This detects the overhang percentage relative to line width and uses a different speed to print. For 100%% overhang, bridging speed is used." @@ -18108,28 +19022,32 @@ msgstr "" msgid "Outer walls" msgstr "外墙" +# AI Translated msgid "" "Filament to print outer walls.\n" "\"Default\" uses the active object/part filament." msgstr "" -"用于打印外墙的耗材。\n" -"“默认”使用当前对象/零件的耗材。" +"用于打印外墙的耗材丝。\n" +"“默认”使用当前对象/零件的耗材丝。" msgid "Inner walls" msgstr "内墙" +# AI Translated msgid "" "Filament to print inner walls.\n" "\"Default\" uses the active object/part filament." msgstr "" -"用于打印内墙的耗材。\n" -"“默认”使用当前对象/零件的耗材。" +"用于打印内墙的耗材丝。\n" +"“默认”使用当前对象/零件的耗材丝。" +# AI Translated msgid "Line width of inner wall. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "内墙的线宽。如果以%表示，它将基于喷嘴直径来计算。" +msgstr "内墙的线宽。如果以%表示，将根据喷嘴直径计算。" +# AI Translated msgid "This is the speed for inner walls." -msgstr "内圈墙打印速度" +msgstr "内墙的打印速度。" # AI Translated msgid "This is the number of walls per layer." @@ -18138,6 +19056,7 @@ msgstr "每一层的墙层数" msgid "Alternate extra wall" msgstr "交替添加额外内墙" +# AI Translated msgid "" "This setting adds an extra wall to every other layer. This way the infill gets wedged vertically between the walls, resulting in stronger prints.\n" "\n" @@ -18145,20 +19064,22 @@ msgid "" "\n" "Using lightning infill together with this option is not recommended as there is limited infill to anchor the extra perimeters to." msgstr "" -"此设置在每隔一层添加一层额外的内墙。这样，填充物就会垂直地夹在墙壁之间，从而产生更牢固的打印件。\n" +"此设置在每隔一层添加一层额外的墙。这样，填充就会垂直地夹在墙之间，从而使打印件更牢固。\n" "\n" -"启用此选项时，需要禁用确保垂直壳厚度选项。\n" +"启用此选项时，需要禁用“确保垂直外壳厚度”选项。\n" "\n" -"不建议将闪电填充与此选项一起使用，因为填充物有限，无法将额外的壁厚固定在填充物上。" +"不建议将闪电填充与此选项一起使用，因为可供额外的墙锚定的填充有限。" +# AI Translated msgid "If you want to process the output G-code through custom scripts, just list their absolute paths here. Separate multiple scripts with a semicolon. Scripts will be passed the absolute path to the G-code file as the first argument, and they can access the Orca Slicer config settings by reading environment variables." -msgstr "如果您希望使用自定义脚本来处理输出的 G-code，只需要在此列出这些脚本的绝对路径，使用分号来分割多个脚本。脚本执行的第一个参数将会被设置为 G-code 文件的绝对路径，并支持脚本通过全局变量来读取 Orca Slicer 的设置。" +msgstr "如果您希望使用自定义脚本来处理输出的 G-code，只需要在此列出这些脚本的绝对路径，使用分号来分割多个脚本。脚本执行的第一个参数将会被设置为 G-code 文件的绝对路径，并支持脚本通过环境变量来读取 Orca Slicer 的设置。" msgid "Change extrusion role G-code (process)" msgstr "挤出类型更换 G-code（工艺）" +# AI Translated msgid "This G-code is inserted when the extrusion role is changed. It runs after the machine and filament extrusion role G-code." -msgstr "当挤出类型发生变化时插入此 G-code。它在机器和耗材的挤出类型更换 G-code 之后运行。" +msgstr "当挤出类型发生变化时插入此 G-code。它在机器和耗材丝的挤出类型更换 G-code 之后运行。" # AI Translated msgid "Plugins Used" @@ -18181,8 +19102,9 @@ msgstr "打印机类型" msgid "Printer notes" msgstr "打印机注释" +# AI Translated msgid "You can put your notes regarding the printer here." -msgstr "你可以把你关于打印机的注释放在这里。" +msgstr "您可以在此填写关于打印机的注释。" msgid "Printer variant" msgstr "打印机变种" @@ -18202,20 +19124,23 @@ msgstr "在XY平面扩展所有筏层" msgid "First layer density" msgstr "首层密度" +# AI Translated msgid "This is the density of the first raft or support layer." -msgstr "筏和支撑的首层密度" +msgstr "筏层或支撑首层的密度。" msgid "First layer expansion" msgstr "首层扩展" +# AI Translated msgid "This expands the first raft or support layer to improve bed adhesion." -msgstr "扩展筏和支撑的首层可以改善和热床的粘接。" +msgstr "扩展筏层或支撑的首层，以改善与热床的粘接。" msgid "Raft layers" msgstr "筏层" +# AI Translated msgid "Object will be raised by this number of support layers. Use this function to avoid warping when printing ABS." -msgstr "模型会在相应层数的支撑上抬高进行打印。使用该功能通常用于打印ABS时翘曲。" +msgstr "模型会在相应层数的支撑上抬高进行打印。使用此功能可避免打印ABS时翘曲。" msgid "The G-code path is generated after simplifying the contour of models to avoid too many points and G-code lines. Smaller values mean higher resolution and more time required to slice." msgstr "为了避免G-code文件中过密集的点和走线，G-code走线通常是在简化模型的外轮廓之后生成。越小的数值代表更高的分辨率，同时需要更长的切片时间。" @@ -18254,11 +19179,13 @@ msgstr "强制在换层时回抽。" msgid "Retraction Length" msgstr "回抽长度" +# AI Translated msgid "Some amount of material in extruder is pulled back to avoid ooze during long travel. Set zero to disable retraction." -msgstr "挤出机中的一些材料被拉回，以避免在长行程期间渗出。设置为零以禁用回缩。" +msgstr "挤出机中的部分材料会被抽回，以避免长距离空驶时渗料。设为0以禁用回抽。" +# AI Translated msgid "Long retraction when cut (beta)" -msgstr "切料时回抽（实验）" +msgstr "切料时长回抽（试验）" msgid "Experimental feature: Retracting and cutting off the filament at a longer distance during changes to minimize purge. While this reduces flush significantly, it may also raise the risk of nozzle clogs or other printing problems." msgstr "实验性选项。在更换耗材丝时，将耗材丝回抽一段距离后再切断以最小化冲刷。虽然这大大减少了冲刷，但也可能增加喷嘴堵塞或其他打印问题的风险。" @@ -18269,11 +19196,13 @@ msgstr "切料回抽距离" msgid "Experimental feature: Retraction length before cutting off during filament change." msgstr "实验性选项：在更换耗材丝时，切断前的回抽长度" +# AI Translated msgid "Long retraction when extruder change" -msgstr "更换挤出机时长回缩" +msgstr "更换挤出机时长回抽" +# AI Translated msgid "Retraction distance when extruder change" -msgstr "更换挤出机时的回缩距离" +msgstr "更换挤出机时的回抽距离" # AI Translated msgid "Retraction Length (Toolchange)" @@ -18292,14 +19221,16 @@ msgstr "回抽完成之后，喷嘴轻微抬升，和打印件之间产生一定 msgid "Z-hop lower boundary" msgstr "Z抬升下边界" +# AI Translated msgid "Z-hop will only come into effect when Z is above this value and is below the parameter: \"Z-hop upper boundary\"." -msgstr "只有当Z高于此值且低于参数(Z抬升上边界)时，Z抬升才会生效" +msgstr "只有当Z高于此值且低于参数“Z抬升上边界”时，Z抬升才会生效。" msgid "Z-hop upper boundary" msgstr "Z抬升上边界" +# AI Translated msgid "If this value is positive, Z-hop will only come into effect when Z is above the parameter: \"Z-hop lower boundary\" and is below this value." -msgstr "如果该值为正，则Z抬升仅在Z高于参数(Z抬升下边界)且低于该值时才会生效" +msgstr "如果该值为正，则Z抬升仅在Z高于参数“Z抬升下边界”且低于该值时才会生效。" msgid "Z-hop type" msgstr "Z抬升类型" @@ -18316,8 +19247,9 @@ msgstr "螺旋" msgid "Traveling angle" msgstr "空驶抬高角度" +# AI Translated msgid "Traveling angle for Slope and Spiral Z-hop type. Setting it to 90° results in Normal Lift." -msgstr "斜坡和螺旋 Z 跳类型的行进角度。将其设置为 90° 会产生正常升力。" +msgstr "“梯形”和“螺旋”Z抬升类型的空驶抬高角度。设为90°时即为普通抬升。" msgid "Only lift Z above" msgstr "仅在高度以上抬Z" @@ -18364,11 +19296,13 @@ msgstr "混合" msgid "Extra High Flow" msgstr "超高流量" +# AI Translated msgid "Enable filament dynamic map" -msgstr "启用耗材动态映射" +msgstr "启用耗材丝动态映射" +# AI Translated msgid "Enable dynamic filament mapping during print." -msgstr "在打印期间启用动态耗材映射。" +msgstr "在打印期间启用动态耗材丝映射。" msgid "Has filament switcher" msgstr "具有耗材切换器" @@ -18392,16 +19326,17 @@ msgstr "当换色后回抽被补偿时，挤出机将推入额外数量的耗材 msgid "Retraction speed" msgstr "回抽速度" +# AI Translated msgid "Speed for retracting filament from the nozzle." -msgstr "从喷嘴回抽耗材的速度" +msgstr "从喷嘴回抽耗材丝的速度。" +# AI Translated msgid "Deretraction speed" -msgstr "重新装填速度" +msgstr "装填回抽速度" +# AI Translated msgid "Speed for reloading filament into the nozzle. Zero means same speed of retraction." -msgstr "" -"向喷嘴重新装填耗材的速度。\n" -"设为 0 则使用与回抽相同的速度。" +msgstr "向喷嘴重新装填耗材丝的速度。设为 0 则使用与回抽相同的速度。" # AI Translated msgid "Deretraction speed (extruder change)" @@ -18409,7 +19344,7 @@ msgstr "装填回抽速度（更换挤出机）" # AI Translated msgid "Speed for reloading filament into the nozzle when switching extruder." -msgstr "切换挤出机时将耗材重新装填到喷嘴的速度。" +msgstr "切换挤出机时将耗材丝重新装填到喷嘴的速度。" msgid "Use firmware retraction" msgstr "使用固件回抽" @@ -18456,12 +19391,13 @@ msgstr "此选项会根据内墙深度使接缝向后移动，形成锯齿形模 msgid "Seam gap" msgstr "接缝间隔" +# AI Translated msgid "" "In order to reduce the visibility of the seam in a closed loop extrusion, the loop is interrupted and shortened by a specified amount.\n" "This amount can be specified in millimeters or as a percentage of the current extruder diameter. The default value for this parameter is 10%." msgstr "" -"为了减少环形中接缝的可见性，环会被打断并按指定数量缩短。数值可用毫米指定，也可以使用当前挤出机直径的百分比来指定。\n" -"默认值为 10%" +"为了降低闭环挤出中接缝的可见性，环会被打断并缩短指定的长度。\n" +"该长度可以用毫米或当前挤出机直径的百分比指定。此参数的默认值为10%。" msgid "Scarf joint seam (beta)" msgstr "斜拼接缝（试验）" @@ -18472,25 +19408,28 @@ msgstr "使用斜拼接缝来最小化接缝的可见性并增加接缝的强度 msgid "Conditional scarf joint" msgstr "选择性应用斜拼接缝" +# AI Translated msgid "Apply scarf joints only to smooth perimeters where traditional seams do not conceal the seams at sharp corners effectively." -msgstr "当墙壁没有合适的锐角以至于传统接缝无法有效隐藏的时候使用斜拼接缝。" +msgstr "当墙没有合适的锐角以至于传统接缝无法有效隐藏的时候使用斜拼接缝。" msgid "Conditional angle threshold" msgstr "角度阈值" +# AI Translated msgid "" "This option sets the threshold angle for applying a conditional scarf joint seam.\n" "If the maximum angle within the perimeter loop exceeds this value (indicating the absence of sharp corners), a scarf joint seam will be used. The default value is 155°." msgstr "" "此选项设置判断是否应用斜拼接缝的角度阈值。\n" -"如果围墙环内的最大角度超过了这个值（表示没有足够锐的角），则使用斜拼接缝接缝。默认值为155°。" +"如果墙环内的最大角度超过此值（表示没有锐角），则使用斜拼接缝。默认值为155°。" msgid "Conditional overhang threshold" msgstr "悬垂阈值" +# AI Translated #, no-c-format, no-boost-format msgid "This option determines the overhang threshold for the application of scarf joint seams. If the unsupported portion of the perimeter is less than this threshold, scarf joint seams will be applied. The default threshold is set at 40% of the external wall's width. Due to performance considerations, the degree of overhang is estimated." -msgstr "此选项设置斜拼接缝应用的悬垂阈值。如果围墙的未支撑部分小于此阈值，则应用斜拼接缝接缝。默认阈值设置为外墙宽度的40%。由于性能考虑，悬垂程度是粗略估算。" +msgstr "此选项设置斜拼接缝应用的悬垂阈值。如果墙的未支撑部分小于此阈值，则应用斜拼接缝。默认阈值设置为外墙宽度的40%。由于性能考虑，悬垂程度是粗略估算。" msgid "Scarf joint speed" msgstr "斜拼接缝速度" @@ -18498,8 +19437,9 @@ msgstr "斜拼接缝速度" msgid "This option sets the printing speed for scarf joints. It is recommended to print scarf joints at a slow speed (less than 100 mm/s). It's also advisable to enable 'Extrusion rate smoothing' if the set speed varies significantly from the speed of the outer or inner walls. If the speed specified here is higher than the speed of the outer or inner walls, the printer will default to the slower of the two speeds. When specified as a percentage (e.g., 80%), the speed is calculated based on the respective outer or inner wall speed. The default value is set to 100%." msgstr "这个选项设置斜拼接缝的打印速度。建议以较慢的速度（小于100mm/s）打印斜拼接缝。如果设置的速度与外墙或内墙的速度相差较大，建议启用“平滑挤出率”。如果此处指定的速度高于外墙或内墙的速度，则打印机将默认使用两者中较慢的速度。当以百分比（例如80%）指定时，速度将基于外墙或内墙的速度进行计算。默认值为100%。" +# AI Translated msgid "Scarf joint flow ratio" -msgstr "斜拼接缝流量" +msgstr "斜拼接缝流量比例" msgid "This factor affects the amount of material for scarf joints." msgstr "这个参数影响斜拼接缝的材料用量。" @@ -18514,8 +19454,9 @@ msgstr "" "斜拼接缝的起始高度。\n" "这个数值可以用毫米或者当前层高的百分比表示。默认值为0。" +# AI Translated msgid "Scarf around entire wall" -msgstr "围绕整个围墙" +msgstr "斜拼接缝覆盖整圈墙" msgid "The scarf extends to the entire length of the wall." msgstr "将斜拼接缝延伸到整个围墙" @@ -18532,8 +19473,9 @@ msgstr "斜拼段数" msgid "Minimum number of segments of each scarf." msgstr "斜拼接缝所需的最少段数" +# AI Translated msgid "Scarf joint for inner walls" -msgstr "应用斜拼于内墙" +msgstr "内墙斜拼接缝" msgid "Use scarf joint for inner walls as well." msgstr "同时应用斜拼接缝于内墙" @@ -18584,29 +19526,33 @@ msgstr "" "\n" "例如，50% 会将路径偏移外墙宽度的一半。实际偏移量同时受实际外墙宽度和到相邻墙的可用间距限制，因此超过 100% 的值或等效的绝对距离不会产生额外效果。设为 0 可禁用偏移。" +# AI Translated msgid "Wipe before external loop" -msgstr "额外的外墙打印前擦拭" +msgstr "外墙前擦拭" +# AI Translated msgid "" "To minimize visibility of potential overextrusion at the start of an external perimeter when printing with Outer/Inner or Inner/Outer/Inner wall print order, the de-retraction is performed slightly on the inside from the start of the external perimeter. That way any potential over extrusion is hidden from the outside surface.\n" "\n" "This is useful when printing with Outer/Inner or Inner/Outer/Inner wall print order as in these modes it is more likely an external perimeter is printed immediately after a de-retraction move." msgstr "" -"为了最大限度地减少在使用外/内或内/外/内墙打印顺序时，外墙起始处的潜在过挤出，在外墙起始处外略微向内执行回填。这样，任何潜在的过挤都会隐藏在外表面之下。\n" +"使用外墙/内墙或内墙/外墙/内墙打印顺序时，为了尽量减少外墙起点处可能出现的过挤出，装填回抽会在外墙起点稍靠内侧的位置执行。这样，任何可能的过挤出都会隐藏在外表面之下。\n" "\n" -"当使用外/内或内/外/内墙打印顺序时，这是有用的，因为在这些模式中，外墙可能会在回填移动之后立即打印。" +"使用外墙/内墙或内墙/外墙/内墙打印顺序时，此选项很有用，因为在这些模式下，外墙更有可能在装填回抽移动后立即打印。" msgid "Wipe speed" msgstr "擦拭速度" +# AI Translated msgid "The wipe speed is determined by the speed setting specified in this configuration. If the value is expressed as a percentage (e.g. 80%), it will be calculated based on the travel speed setting above. The default value for this parameter is 80%." -msgstr "擦拭速度是根据此配置中指定的速度设置确定的。如果该值以百分比形式表示（例如80%），则将根据上方的移动速度设置进行计算。该参数的默认值为80%。" +msgstr "擦拭速度是根据此配置中指定的速度设置确定的。如果该值以百分比形式表示（例如80%），则将根据上方的空驶速度设置进行计算。该参数的默认值为80%。" msgid "Skirt distance" msgstr "裙边距离" +# AI Translated msgid "This is the distance from the skirt to the brim or the object." -msgstr "从裙边到模型或者brim的距离" +msgstr "从裙边到模型或者Brim的距离。" msgid "Skirt start point" msgstr "裙边起始点" @@ -18623,8 +19569,9 @@ msgstr "裙边有多少层。通常只有一层" msgid "Single loop after first layer" msgstr "首层后单圈" +# AI Translated msgid "Limits the skirt/draft shield loops to one wall after the first layer. This is useful, on occasion, to conserve filament but may cause the draft shield/skirt to warp / crack." -msgstr "在首层之后，将环形裙边或隔风罩限制为单层墙。这在某些情况下有助于节省耗材，但可能导致隔风罩或裙边翘曲或开裂。" +msgstr "在首层之后，将裙边或风挡限制为单圈墙。这在某些情况下有助于节省耗材丝，但可能导致风挡或裙边翘曲或开裂。" msgid "Draft shield" msgstr "风挡" @@ -18666,16 +19613,17 @@ msgstr "裙边速度，单位为mm/s。0表示使用默认的层挤出速度。" msgid "Skirt minimum extrusion length" msgstr "裙边最小挤出长度" +# AI Translated msgid "" "Minimum filament extrusion length in mm when printing the skirt. Zero means this feature is disabled.\n" "\n" "Using a non-zero value is useful if the printer is set up to print without a prime line.\n" "Final number of loops is not taking into account while arranging or validating objects distance. Increase loop number in such case." msgstr "" -"打印裙边时的最小耗材挤出长度，单位为毫米。0表示禁用此功能。\n" +"打印裙边时的最小耗材丝挤出长度，单位为毫米。0表示禁用此功能。\n" "\n" "如果打印机设置为不打印起始擦嘴线，建议使用非零值。\n" -"在排列或验证物体距离时，最终的圈数不会被纳入计算。在这种情况下请增加圈数。" +"在排列或验证对象距离时，最终的圈数不会被纳入计算。在这种情况下请增加圈数。" # AI Translated msgid "The printing speed in exported G-code will be slowed down when the estimated layer time is shorter than this value in order to get better cooling for these layers." @@ -18687,32 +19635,37 @@ msgstr "稀疏填充最小阈值" msgid "Sparse infill areas which are smaller than this threshold value are replaced by internal solid infill." msgstr "小于这个阈值的稀疏填充区域将会被内部实心填充替代。" +# AI Translated msgid "" "Filament to print internal solid infill.\n" "\"Default\" uses the active object/part filament." msgstr "" -"用于打印内部实心填充的耗材。\n" -"“默认”使用当前对象/零件的耗材。" +"用于打印内部实心填充的耗材丝。\n" +"“默认”使用当前对象/零件的耗材丝。" +# AI Translated msgid "" "Filament to print top surface.\n" "\"Default\" uses the active object/part filament." msgstr "" -"用于打印顶面的耗材。\n" -"“默认”使用当前对象/零件的耗材。" +"用于打印顶面的耗材丝。\n" +"“默认”使用当前对象/零件的耗材丝。" +# AI Translated msgid "" "Filament to print bottom surface.\n" "\"Default\" uses the active object/part filament." msgstr "" -"用于打印底面的耗材。\n" -"“默认”使用当前对象/零件的耗材。" +"用于打印底面的耗材丝。\n" +"“默认”使用当前对象/零件的耗材丝。" +# AI Translated msgid "Line width of internal solid infill. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "内部实心填充的线宽。如果以%表示，它将基于喷嘴直径来计算。" +msgstr "内部实心填充的线宽。如果以%表示，将根据喷嘴直径计算。" +# AI Translated msgid "This is the speed for internal solid infill, not including the top or bottom surface." -msgstr "内部实心填充的速度，不是顶面和底面。" +msgstr "内部实心填充的速度，不包括顶面和底面。" msgid "This enables spiraling, which smooths out the Z moves of the outer contour and turns a solid model into a single walled print with solid bottom layers. The final generated model has no seam." msgstr "沿着对象的外轮廓螺旋上升，将实体模型转变为只有底面实心层和侧面单层墙壁的打印。最后生成的打印件没有接缝。" @@ -18720,32 +19673,39 @@ msgstr "沿着对象的外轮廓螺旋上升，将实体模型转变为只有底 msgid "Smooth Spiral" msgstr "光滑螺旋模式" +# AI Translated msgid "Smooth Spiral smooths out X and Y moves as well, resulting in no visible seam at all, even in the XY directions on walls that are not vertical." -msgstr "光滑螺旋模式平滑X和Y轴移动，从而在所有方向上都没有可见的接缝，即使在不垂直的墙壁上也是如此。" +msgstr "光滑螺旋模式平滑X和Y轴移动，从而在所有方向上都没有可见的接缝，即使在不垂直的墙上也是如此。" msgid "Max XY Smoothing" msgstr "最大XY平滑阈值" +# AI Translated #, no-c-format, no-boost-format msgid "Maximum distance to move points in XY to try to achieve a smooth spiral. If expressed as a %, it will be computed over nozzle diameter." -msgstr "在XY平面上移动点的最大距离，以尝试实现平滑的螺旋。如果以%表示，它将基于喷嘴直径来计算。" +msgstr "在XY平面上移动点的最大距离，以尝试实现平滑的螺旋。如果以%表示，将根据喷嘴直径计算。" +# AI Translated msgid "Spiral starting flow ratio" -msgstr "螺旋开始流量比" +msgstr "螺旋开始流量比例" +# AI Translated #, no-c-format, no-boost-format msgid "Sets the starting flow ratio while transitioning from the last bottom layer to the spiral. Normally the spiral transition scales the flow ratio from 0% to 100% during the first loop which can in some cases lead to under extrusion at the start of the spiral." -msgstr "设置从最后一个底层过渡到螺旋时的起始流量比。通常，螺旋过渡在第一个循环期间将流量比从 0% 调整到 100%，这在某些情况下可能导致螺旋开始时挤出不足。" +msgstr "设置从最后一个底层过渡到螺旋时的起始流量比例。通常，螺旋过渡在第一圈将流量比例从 0% 调整到 100%，这在某些情况下可能导致螺旋开始时挤出不足。" +# AI Translated msgid "Spiral finishing flow ratio" -msgstr "螺旋结束流量比" +msgstr "螺旋结束流量比例" +# AI Translated #, no-c-format, no-boost-format msgid "Sets the finishing flow ratio while ending the spiral. Normally the spiral transition scales the flow ratio from 100% to 0% during the last loop which can in some cases lead to under extrusion at the end of the spiral." -msgstr "设置结束螺旋时的精加工流量比。通常，螺旋过渡在最后一个循环期间将流量比从 100% 缩放到 0%，这在某些情况下可能会导致螺旋末端挤出不足。" +msgstr "设置螺旋结束时的结束流量比例。通常，螺旋过渡在最后一圈将流量比例从 100% 缩放到 0%，这在某些情况下可能会导致螺旋末端挤出不足。" +# AI Translated msgid "If smooth or traditional mode is selected, a timelapse video will be generated for each print. After each layer is printed, a snapshot is taken with the chamber camera. All of these snapshots are composed into a timelapse video when printing completes. If smooth mode is selected, the toolhead will move to the excess chute after each layer is printed and then take a snapshot. Since the melt filament may leak from the nozzle during the process of taking a snapshot, a prime tower is required for smooth mode to wipe the nozzle." -msgstr "如果启用平滑模式或者传统模式，将在每次打印时生成延时摄影视频。打印完每层后，将用内置相机拍摄快照。打印完成后，所有这些快照会组合成一个延时视频。如果启用平滑模式，打印完每层后，工具头将移动到吐料槽，然后拍摄快照。由于平滑模式在拍摄快照的过程中熔丝可能会从喷嘴中泄漏，因此需要使用擦拭塔进行喷嘴擦拭。" +msgstr "如果启用平滑模式或者传统模式，将在每次打印时生成延时摄影视频。打印完每层后，将用内置摄像头拍摄快照。打印完成后，所有这些快照会组合成一个延时视频。如果启用平滑模式，打印完每层后，工具头将移动到吐料槽，然后拍摄快照。由于平滑模式在拍摄快照的过程中熔丝可能会从喷嘴中泄漏，因此需要使用擦拭塔进行喷嘴擦拭。" msgid "Traditional" msgstr "传统模式" @@ -18759,14 +19719,16 @@ msgstr "最远点延时摄影" # AI Translated msgid "When enabled, the timelapse snapshot is taken at the farthest point from camera instead of traveling to the wipe tower or excess chute. Only effective in traditional timelapse mode on non-I3 printers." -msgstr "启用后，延时摄影快照会在距离相机最远的点拍摄，而不是移动到擦拭塔或废料滑道。仅在非 I3 打印机的传统延时摄影模式下有效。" +msgstr "启用后，延时摄影快照会在距离摄像头最远的点拍摄，而不是移动到擦拭塔或吐料槽。仅在非 I3 打印机的传统延时摄影模式下有效。" +# AI Translated msgid "Temperature variation" -msgstr "软化温度" +msgstr "温度变化" +# AI Translated #. TRN PrintSettings : "Ooze prevention" > "Temperature variation" msgid "Temperature difference to be applied when an extruder is not active. The value is not used when 'idle_temperature' in filament settings is set to non-zero value." -msgstr "挤出机未启动时施加的温差。当耗材丝设置中的“idle_Temperature”设置为非零值时，不使用该值。" +msgstr "挤出机处于非活动状态时应用的温差。当耗材丝设置中的“idle_temperature”设置为非零值时，不使用该值。" msgid "∆℃" msgstr "∆℃" @@ -18774,11 +19736,13 @@ msgstr "∆℃" msgid "Preheat time" msgstr "预热时间" +# AI Translated msgid "To reduce the waiting time after tool change, Orca can preheat the next tool while the current tool is still in use. This setting specifies the time in seconds to preheat the next tool. Orca will insert a M104 command to preheat the tool in advance." -msgstr "为了减少换刀后的等待时间，Orca 可以在当前刀具仍在使用时预热下一个刀具。此设置指定预热下一个工具的时间（以秒为单位）。 Orca 会插入 M104 指令提前预热刀具。" +msgstr "为了减少换工具头后的等待时间，Orca 可以在当前工具头仍在使用时预热下一个工具头。此设置指定提前预热下一个工具头的时间（以秒为单位）。Orca 会插入 M104 指令提前预热工具头。" +# AI Translated msgid "Preheat steps" -msgstr "预热步骤" +msgstr "预热步数" msgid "Insert multiple preheat commands (e.g. M104.1). Only useful for Prusa XL. For other printers, please set it to 1." msgstr "插入多个预热命令（例如 M104.1）。仅适用于 Prusa XL。对于其他打印机，请将其设置为 1。" @@ -18799,8 +19763,9 @@ msgstr "开始使用这个耗材丝打印的起始G-code" msgid "Single Extruder Multi Material" msgstr "单挤出机多材料" +# AI Translated msgid "Use single nozzle to print multi filament." -msgstr "使用单喷嘴打印多耗材" +msgstr "使用单喷嘴打印多耗材丝。" # AI Translated msgid "IDEX/IQEX Printer" @@ -18926,17 +19891,20 @@ msgstr "IDEX/IQEX 模式 G-code" msgid "G-code or macro call to inject at print start for each mode." msgstr "每个模式在打印开始时插入的 G-code 或宏调用。" +# AI Translated msgid "Manual Filament Change" -msgstr "手动更换丝材" +msgstr "手动更换耗材丝" +# AI Translated msgid "Enable this option to omit the custom Change filament G-code only at the beginning of the print. The tool change command (e.g., T0) will be skipped throughout the entire print. This is useful for manual multi-material printing, where we use M600/PAUSE to trigger the manual filament change action." -msgstr "启用该选项可以在打印开始时省略自定义更换耗材丝的 G-code。整个打印过程中的工具头指令（如 T0）将会被跳过。这对于手动多材料打印十分有用，其将会使用 M600/PAUSE 指令来使您可以进行手动对耗材丝进行更换。" +msgstr "启用此选项后，仅在打印开始时省略自定义“耗材丝更换G-code”。换工具头指令（如 T0）将在整个打印过程中被跳过。这对手动多材料打印很有用，此时使用 M600/PAUSE 指令触发手动更换耗材丝。" msgid "Wipe tower type" msgstr "擦拭塔类型" +# AI Translated msgid "Choose the wipe tower implementation for multi-material prints. Type 1 is recommended for Bambu and Qidi printers with a filament cutter. Type 2 offers better compatibility with multi-tool and MMU printers and provide overall better compatibility." -msgstr "选择多材料打印的擦拭塔实现方式。类型 1 推荐用于带有耗材切刀的 Bambu 和 Qidi 打印机。类型 2 提供与多工具头和 MMU 打印机更好的兼容性，并提供更好的整体兼容性。" +msgstr "选择多材料打印的擦拭塔实现方式。类型 1 推荐用于带有耗材丝切刀的 Bambu 和 Qidi 打印机。类型 2 提供与多工具头和 MMU 打印机更好的兼容性，并提供更好的整体兼容性。" msgid "Type 1" msgstr "类型 1" @@ -18950,14 +19918,17 @@ msgstr "冲刷进擦拭塔" msgid "Purge remaining filament into prime tower." msgstr "冲刷剩余的耗材丝进入擦拭塔" +# AI Translated msgid "Enable filament ramming" -msgstr "启用耗材尖端成型" +msgstr "启用耗材丝尖端成型" +# AI Translated msgid "Tool change on wipe tower" -msgstr "在擦拭塔上换头" +msgstr "在擦拭塔上换工具头" +# AI Translated msgid "Force the toolhead to travel to the wipe tower before issuing the tool change command (Tx). Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. By default Orca skips the travel on multi-toolhead machines because the firmware handles the head swap, which can result in the Tx command being issued above the printed part. Enable this option if you want the tool change to always be issued above the wipe tower instead." -msgstr "在发出换头命令 (Tx) 之前，强制打印头先移动到擦拭塔。仅与使用第 2 类擦拭塔的多挤出机（多打印头）打印机相关。默认情况下，Orca 会在多打印头机器上跳过此移动，因为固件会处理换头，这可能导致 Tx 命令在打印件上方发出。如果您希望换头命令始终在擦拭塔上方发出，请启用此选项。" +msgstr "在发出换工具头命令（Tx）之前，强制工具头先空驶到擦拭塔。仅适用于使用类型 2 擦拭塔的多挤出机（多工具头）打印机。默认情况下，Orca 会在多工具头机器上跳过此空驶，因为固件会处理工具头切换，这可能导致 Tx 命令在打印件上方发出。如果您希望换工具头命令始终在擦拭塔上方发出，请启用此选项。" # AI Translated msgid "Wait for temperature on wipe tower" @@ -18967,8 +19938,9 @@ msgstr "在擦拭塔上等待温度" msgid "Pick up the new tool without waiting for it to reach printing temperature, travel to the wipe tower, and wait for the temperature there, right before purging. Ooze from the heat-up lands on the tower instead of the model, and the travel overlaps with the heating. Only relevant for multi-extruder (multi-toolhead) printers using a Type 2 wipe tower. The firmware or tool change macro must not wait for the temperature itself. When disabled, the temperature wait is issued right after the tool change command." msgstr "拾取新工具头后不等待其达到打印温度，直接移动到擦拭塔，并在冲刷前于擦拭塔上等待温度。升温过程中渗出的耗材丝会落在擦拭塔上而不是模型上，且移动时间与加热过程重叠。仅适用于使用 2 型擦拭塔的多挤出机（多工具头）打印机。固件或换工具头宏本身不得等待温度。禁用时，等待温度的指令将在换工具头命令之后立即发出。" +# AI Translated msgid "No sparse layers (beta)" -msgstr "无稀疏层 （实验功能）" +msgstr "无稀疏层（试验）" # AI Translated msgid "If enabled, the wipe tower will not be printed on layers with no tool changes. On layers with a tool change, extruder will travel downward to print the wipe tower, so the tower ends up below the model and the toolhead has to reach down to it. Layouts where that would collide with an already printed object are rejected. Has no effect with smooth timelapse or clumping detection, which need a tower on every layer." @@ -19042,19 +20014,21 @@ msgid "" msgstr "" "将循环换料顺序同样应用于首层。\n" "默认关闭，因为首层改为按最佳热床粘接排序：打印首层细小脆弱特征的耗材丝会最后打印，这样后续的换料和空驶就不易将这些附着薄弱的部分蹭掉。若设置了自定义首层耗材丝序列，该首层顺序也会遵循它。循环顺序的好处（额外的换料让每层有更多冷却时间）并不适用于首层，因为首层为了粘接会以慢速高温打印。\n" -"仅当你需要包括首层在内的每一层都使用完全相同的换料顺序时才启用此项，代价是失去上述粘接优化。" +"仅当您需要包括首层在内的每一层都使用完全相同的换料顺序时才启用此项，代价是失去上述粘接优化。" msgid "Slice gap closing radius" msgstr "切片间隙闭合半径" +# AI Translated msgid "Cracks smaller than 2x gap closing radius are being filled during the triangle mesh slicing. The gap closing operation may reduce the final print resolution, therefore it is advisable to keep the value reasonably low." -msgstr "在三角形网格切片过程中，小于2倍间隙闭合半径的裂纹将被填充。间隙闭合操作可能会降低最终打印分辨率，因此建议降值保持在合理的较低水平" +msgstr "在三角形网格切片过程中，小于2倍间隙闭合半径的裂纹将被填充。间隙闭合操作可能会降低最终打印分辨率，因此建议将该值保持在合理的较低水平。" msgid "Slicing Mode" msgstr "切片模式" +# AI Translated msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model." -msgstr "对3DLabPrint的飞机模型使用 \"奇偶\"。使用 \"闭孔 \"来关闭模型上的所有孔。" +msgstr "对3DLabPrint的飞机模型使用“奇偶”。使用“闭孔”来关闭模型上的所有孔。" msgid "Regular" msgstr "常规" @@ -19068,8 +20042,9 @@ msgstr "闭孔" msgid "Z offset" msgstr "Z偏移" +# AI Translated msgid "This value will be added (or subtracted) from all the Z coordinates in the output G-code. It is used to compensate for bad Z endstop position: for example, if your endstop zero actually leaves the nozzle 0.3mm far from the print bed, set this to -0.3 (or fix your endstop)." -msgstr "此值将从输出 G-Code 中的所有 Z 坐标中添加(或减去)。它用于补偿损坏的 Z 端限位器置：例如，如果限位器零实际离开喷嘴 0.3mm 远离打印板(打印床)，将其设置为 -0.3（或调整限位器）。" +msgstr "此值将加到（或减去）输出 G-Code 中的所有 Z 坐标上。它用于补偿不准确的 Z 限位开关位置：例如，如果限位开关归零时喷嘴实际距离热床 0.3mm，则将此值设为 -0.3（或调整限位开关）。" msgid "Enable support" msgstr "开启支撑" @@ -19077,8 +20052,9 @@ msgstr "开启支撑" msgid "This enables support generation." msgstr "开启支撑生成。" +# AI Translated msgid "Normal (auto) and Tree (auto) are used to generate support automatically. If Normal (manual) or Tree (manual) is selected, only support enforcers are generated." -msgstr "普通（自动）和树状（自动）用于自动生成支撑。如果选择普通（手动）或树状（手动），则仅在支撑强制面上生成支撑。" +msgstr "普通（自动）和树状（自动）用于自动生成支撑。如果选择普通（手动）或树状（手动），则仅生成支撑生成器指定的支撑。" msgid "Normal (auto)" msgstr "普通(自动)" @@ -19092,17 +20068,20 @@ msgstr "普通(手动)" msgid "Tree (manual)" msgstr "树状(手动)" +# AI Translated msgid "Support/object XY distance" -msgstr "支撑/模型xy间距" +msgstr "支撑/模型XY间距" msgid "This controls the XY separation between an object and its support." msgstr "模型和支撑之间XY分离距离" +# AI Translated msgid "Support/object first layer gap" -msgstr "支撑/对象首层间距" +msgstr "支撑/模型首层间距" +# AI Translated msgid "XY separation between an object and its support at the first layer." -msgstr "物体与其首层支撑之间的 XY 间隔。" +msgstr "对象与其首层支撑之间的 XY 间隔。" # AI Translated msgid "Pattern angle" @@ -19111,8 +20090,9 @@ msgstr "图案角度" msgid "Use this setting to rotate the support pattern on the horizontal plane." msgstr "设置支撑图案在水平面的旋转角度。" +# AI Translated msgid "On build plate only" -msgstr "仅在打印板生成" +msgstr "仅在热床上生成" msgid "This setting only generates supports that begin on the build plate." msgstr "不在模型表面上生成支撑，只在热床上生成。" @@ -19138,75 +20118,92 @@ msgstr "支撑顶部与模型之间的Z间隙。" msgid "Bottom Z distance" msgstr "底部Z距离" +# AI Translated msgid "Z gap between the object and the support bottom. If Support Top Z Distance is 0 and the bottom has interface layers, this value is ignored and the support is printed in direct contact with the object (no gap)." -msgstr "模型与支撑底部之间的Z间隙。如果支撑顶部Z距离为0且底部有界面层，则忽略该值，支撑与模型直接接触打印（无间隙）。" +msgstr "模型与支撑底部之间的Z间隙。如果支撑顶部Z距离为0且底部有支撑面层，则忽略该值，支撑与模型直接接触打印（无间隙）。" msgid "Support/raft base" msgstr "支撑/筏层主体" +# AI Translated msgid "" "Filament to print support base and raft.\n" "\"Default\" means no specific filament for support and current filament is used." msgstr "" -"用于打印支撑基底和筏层的耗材。\n" -"“默认”表示不为支撑指定特定耗材，使用当前耗材。" +"用于打印支撑基底和筏层的耗材丝。\n" +"“默认”表示不为支撑指定特定耗材丝，使用当前耗材丝。" +# AI Translated msgid "Avoid interface filament for base" -msgstr "界面材料不用于主体" +msgstr "主体避免使用支撑面耗材丝" +# AI Translated msgid "Avoid using support interface filament to print support base if possible." -msgstr "避免使用支撑界面材料打印支撑主体。" +msgstr "尽可能避免使用支撑面耗材丝打印支撑主体。" +# AI Translated msgid "Line width of support. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "支撑的线宽。如果以%表示，它将基于喷嘴直径来计算。" +msgstr "支撑的线宽。如果以%表示，将根据喷嘴直径计算。" +# AI Translated msgid "Loop pattern interface" -msgstr "接触面采用圈形走线。" +msgstr "支撑面采用圈形图案" +# AI Translated msgid "This covers the top contact layer of the supports with loops. It is disabled by default." -msgstr "使用圈形走线覆盖顶部接触面。默认关闭。" +msgstr "使用圈形走线覆盖支撑的顶部支撑面。默认关闭。" +# AI Translated +# Needs human review: Check the label reads naturally next to 支撑/筏层主体. msgid "Support/raft interface" -msgstr "支撑/筏层界面" +msgstr "支撑/筏层支撑面" +# AI Translated msgid "" "Filament to print support interface.\n" "\"Default\" means no specific filament for support interface and current filament is used." msgstr "" -"用于打印支撑面的耗材。\n" -"“默认”表示不为支撑面指定特定耗材，使用当前耗材。" +"用于打印支撑面的耗材丝。\n" +"“默认”表示不为支撑面指定特定耗材丝，使用当前耗材丝。" +# AI Translated msgid "Top interface layers" -msgstr "顶部接触面层数" +msgstr "顶部支撑面层数" # AI Translated msgid "This is the number of top interface layers." -msgstr "顶部接触层的层数" +msgstr "顶部支撑面的层数。" +# AI Translated msgid "Bottom interface layers" -msgstr "底部接触面层数" +msgstr "底部支撑面层数" +# AI Translated msgid "Number of bottom interface layers." -msgstr "底部界面层的数量" +msgstr "底部支撑面的层数。" msgid "Same as top" msgstr "和顶部相同" +# AI Translated msgid "Top interface spacing" -msgstr "顶部接触面线距" +msgstr "顶部支撑面线距" +# AI Translated msgid "" "Spacing of interface lines. Zero means solid interface.\n" "Force using solid interface when support ironing is enabled." msgstr "" -"顶部接触面走线的线距。0 表示实心接触面。\n" -"若启用了支撑熨烫，则此选项将强制使用实心接触面设置。" +"顶部支撑面走线的线距。0 表示实心支撑面。\n" +"若启用了支撑熨烫，则此选项将强制使用实心支撑面设置。" +# AI Translated msgid "Bottom interface spacing" -msgstr "底部接触面线距" +msgstr "底部支撑面线距" +# AI Translated msgid "This is the spacing of bottom interface lines. 0 means solid interface." -msgstr "底部接触面走线的线距。0 表示实心接触面。" +msgstr "底部支撑面走线的线距。0 表示实心支撑面。" msgid "This is the speed for support interfaces." msgstr "支撑面速度" @@ -19214,6 +20211,7 @@ msgstr "支撑面速度" msgid "Base pattern" msgstr "支撑主体图案" +# AI Translated msgid "" "Line pattern of support.\n" "\n" @@ -19225,7 +20223,7 @@ msgstr "" "\n" "树状支撑的默认选项为空心，即无主体图案。其他支撑类型的默认选项为直线图案。\n" "\n" -"注意：对于有机支撑，仅在空心/默认主体图案下支持双墙。闪电主体图案仅树状精简/坚固/混合支撑支持。对于其他支撑类型，将改用直线图案替代闪电图案。" +"注意：对于有机支撑，仅在空心/默认主体图案下支持双墙。闪电主体图案仅苗条树/粗壮树/混合树支撑支持。对于其他支撑类型，将改用直线图案替代闪电图案。" msgid "Rectilinear grid" msgstr "直线网格" @@ -19236,8 +20234,9 @@ msgstr "空心" msgid "Interface pattern" msgstr "支撑面图案" +# AI Translated msgid "This is the line pattern for support interfaces. The default pattern for non-soluble support interfaces is Rectilinear while the default pattern for soluble support interfaces is Concentric." -msgstr "支撑接触面的走线图案。非可溶支撑接触面的默认图案为直线，可溶支撑接触面的默认图案为同心。" +msgstr "支撑面的走线图案。非可溶支撑面的默认图案为直线，可溶支撑面的默认图案为同心。" msgid "Rectilinear Interlaced" msgstr "交叠的直线" @@ -19257,12 +20256,13 @@ msgstr "在水平方向对普通支撑进行拓展（+）或收缩（-）" msgid "This is the speed for support." msgstr "支撑打印速度" +# AI Translated msgid "" "Style and shape of the support. For normal support, projecting the supports into a regular grid will create more stable supports (default), while snug support towers will save material and reduce object scarring.\n" "For tree support, slim and organic style will merge branches more aggressively and save a lot of material (default organic), while hybrid style will create similar structure to normal support under large flat overhangs." msgstr "" -"支撑物的样式和形状。对于普通支撑，将支撑投射到一个规则的网格中，将创建更稳定的支撑（默认），而紧贴的支撑塔将节省材料并减少物体的瑕疵。\n" -"对于树形支撑，苗条树将更激进地合并树枝，并节省大量的材料；粗壮树会产生更大更强壮的支撑结构，但用料更多；而混合树是苗条树和普通支撑的结合，它会在大的平面悬垂下创建与正常支撑类似的结构（默认）。" +"支撑的样式和形状。对于普通支撑，将支撑投射到规则的网格中会生成更稳定的支撑（默认），而紧贴的支撑塔会节省材料并减少模型表面的瑕疵。\n" +"对于树状支撑，苗条树和有机树样式会更激进地合并树枝并节省大量材料（默认有机树），而混合树样式会在大的平面悬垂下生成与普通支撑类似的结构。" msgid "Default (Grid/Organic)" msgstr "默认 (网格/有机)" @@ -19285,8 +20285,9 @@ msgstr "混合树" msgid "Independent support layer height" msgstr "支撑独立层高" +# AI Translated msgid "Support layer uses layer height independent with object layer. This is to support customizing Z-gap and save print time. This option will be invalid when the prime tower is enabled." -msgstr "支撑层使用与对象层独立的层高。这是为了支持自定义z-gap并且节省打印时间。当擦料塔被启用时，这个选项将无效。" +msgstr "支撑层使用与模型层独立的层高。这是为了支持自定义Z间隙并节省打印时间。启用擦拭塔时，此选项无效。" msgid "Threshold angle" msgstr "阈值角度" @@ -19462,15 +20463,17 @@ msgstr "冲刷棱柱的宽度（机器 X 方向，即横跨传送带的方向） msgid "Tree support branch angle" msgstr "树状支撑分支角度" +# AI Translated msgid "This setting determines the maximum overhang angle that the branches of tree support are allowed to make. If the angle is increased, the branches can be printed more horizontally, allowing them to reach farther." -msgstr "此设置确定了允许树状支撑的最大悬垂角度。如果角度增加，可以更水平地打印分支，使它们可以到达更远的地方。" +msgstr "此设置确定了树状支撑分支所允许的最大悬垂角度。如果角度增加，分支可以更水平地打印，从而延伸得更远。" msgid "Preferred Branch Angle" msgstr "首选分支角度" +# AI Translated #. TRN PrintSettings: "Organic supports" > "Preferred Branch Angle" msgid "The preferred angle of the branches, when they do not have to avoid the model. Use a lower angle to make them more vertical and more stable. Use a higher angle for branches to merge faster." -msgstr "分支的首选角度，每当它们不必避开模型之时。使用小的角度使之更垂直、更稳定。使用大的角度使之更快地合并。" +msgstr "分支在无需避开模型时的首选角度。使用较小的角度可使分支更垂直、更稳定；使用较大的角度可使分支更快地合并。" msgid "Tree support branch distance" msgstr "树状支撑分支距离" @@ -19481,28 +20484,34 @@ msgstr "此设置确定了树状支撑的相邻节点之间的距离。" msgid "Branch Density" msgstr "分支密度" +# AI Translated #. TRN PrintSettings: "Organic supports" > "Branch Density" msgid "Adjusts the density of the support structure used to generate the tips of the branches. A higher value results in better overhangs but the supports are harder to remove, thus it is recommended to enable top support interfaces instead of a high branch density value if dense interfaces are needed." -msgstr "用于调整分支尖端所生成的支撑结构的密度。值越大悬垂越好，但更难拆支撑，因此，如果需要密集的接触面，建议启用顶部接触面相关参数，而不是较高的分支密度。" +msgstr "用于调整分支尖端所生成的支撑结构的密度。值越大悬垂越好，但更难拆支撑，因此，如果需要致密的支撑面，建议启用顶部支撑面，而不是较高的分支密度。" +# AI Translated msgid "Auto brim width" -msgstr "自动裙边宽度" +msgstr "自动Brim宽度" +# AI Translated msgid "Enabling this option means the width of the brim for tree support will be automatically calculated." -msgstr "启用此选项意味着树状支撑的裙边宽度将自动计算自动计算" +msgstr "启用此选项意味着树状支撑的Brim宽度将自动计算。" +# AI Translated msgid "Tree support brim width" -msgstr "树状支撑裙边宽度" +msgstr "树状支撑Brim宽度" +# AI Translated msgid "Distance from tree branch to the outermost brim line." -msgstr "从树状支撑分支到最外层裙边线的距离" +msgstr "从树状支撑分支到最外层Brim线的距离。" msgid "Tip Diameter" msgstr "尖端直径" +# AI Translated #. TRN PrintSettings: "Organic supports" > "Tip Diameter" msgid "Branch tip diameter for organic supports." -msgstr "Organic支撑分支的尖端直径" +msgstr "有机支撑分支的尖端直径。" msgid "Tree support branch diameter" msgstr "树状支撑分支直径" @@ -19514,12 +20523,14 @@ msgstr "此设置确定了树状支撑节点的初始直径。" msgid "Branch Diameter Angle" msgstr "分支直径的角度" +# AI Translated #. TRN PrintSettings: "Organic supports" > "Branch Diameter Angle" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the organic support." -msgstr "分支直径的角度，随着分支向底部逐渐变厚。如果角度为0，分支将在其长度上拥有均匀的厚度。一点角度可以增加organic的稳定性。" +msgstr "分支直径的角度，随着分支向底部逐渐变厚。如果角度为0，分支将在其长度上拥有均匀的厚度。一点角度可以增加有机支撑的稳定性。" +# AI Translated msgid "Support wall loops" -msgstr "支撑外墙层数" +msgstr "支撑墙层数" msgid "This setting specifies the count of support walls in the range of [0,2]. 0 means auto." msgstr "此设置指定[0,2]范围内的支撑墙层数。0表示自动。" @@ -19530,13 +20541,13 @@ msgstr "树状支撑生成填充" msgid "This setting specifies whether to add infill inside large hollows of tree support." msgstr "这个设置决定是否为树状支撑内部的空腔生成填充。" +# AI Translated msgid "Ironing Support Interface" -msgstr "支撑界面熨烫" +msgstr "支撑面熨烫" +# AI Translated msgid "Ironing is using small flow to print on same height of support interface again to make it more smooth. This setting controls whether support interface being ironed. When enabled, support interface will be extruded as solid too." -msgstr "" -"此设置控制是否对支撑面进行熨烫。熨烫是使用小流量再次在支撑面的相同高度上打印，使其更加平滑。\n" -"启用时，支撑面也会被挤出为实心。" +msgstr "此设置控制是否对支撑面进行熨烫。熨烫是使用小流量再次在支撑面的相同高度上打印，使其更加平滑。启用时，支撑面也会被挤出为实心。" msgid "Support Ironing Pattern" msgstr "支撑熨烫图案" @@ -19544,10 +20555,9 @@ msgstr "支撑熨烫图案" msgid "Support Ironing flow" msgstr "支撑熨烫流量" +# AI Translated msgid "The amount of material to extrude during ironing. Relative to flow of normal support interface layer height. Too high value results in overextrusion on the surface." -msgstr "" -"在熨烫过程中需要挤出的材料流量。此设置与普通支撑面层流量设置之间相关。\n" -"值过高会导致表面过量挤出。" +msgstr "熨烫时挤出的材料量，相对于正常支撑面层高对应的流量。值过高会导致表面过挤出。" msgid "Support Ironing line spacing" msgstr "支撑熨烫线间距" @@ -19555,20 +20565,31 @@ msgstr "支撑熨烫线间距" msgid "Activate temperature control" msgstr "激活温度控制" +# AI Translated msgid "" "Enable this option for automated chamber temperature control. This option activates the emitting of an M191 command before the \"machine_start_gcode\"\n" " which sets the chamber temperature and waits until it is reached. In addition, it emits an M141 command at the end of the print to turn off the chamber heater, if present.\n" "\n" "This option relies on the firmware supporting the M191 and M141 commands either via macros or natively and is usually used when an active chamber heater is installed." -msgstr "启用此选项可实现自动室温度控制。该选项激活在“machine_start_gcode”之前发出 M191 命令 它设置腔室温度并等待达到该温度。此外，它还会在打印结束时发出 M141 命令以关闭腔室加热器（如果有）。 此选项依赖于通过宏或本机支持 M191 和 M141 命令的固件，通常在安装主动室加热器时使用。" +msgstr "" +"启用此选项可实现自动腔体温度控制。该选项会在“machine_start_gcode”之前发出 M191 命令，\n" +"用于设置腔体温度并等待其达到该温度。此外，它还会在打印结束时发出 M141 命令以关闭腔体加热器（如果有）。\n" +"\n" +"此选项依赖固件通过宏或原生方式支持 M191 和 M141 命令，通常在安装了主动腔体加热器时使用。" +# AI Translated msgid "" "For high-temperature materials like ABS, ASA, PC, and PA, a higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength. However, at the same time, a higher chamber temperature will reduce the efficiency of air filtration for ABS and ASA.\n" "\n" "For PLA, PETG, TPU, PVA, and other low-temperature materials, this option should be disabled (set to 0) as the chamber temperature should be low to avoid extruder clogging caused by material softening at the heat break.\n" "\n" "If enabled, this parameter also sets a G-code variable named chamber_temperature, which can be used to pass the desired chamber temperature to your print start macro, or a heat soak macro like this: PRINT_START (other variables) CHAMBER_TEMP=[chamber_temperature]. This may be useful if your printer does not support M141/M191 commands, or if you desire to handle heat soaking in the print start macro if no active chamber heater is installed." -msgstr "对于 ABS、ASA、PC 和 PA 等高温材料，较高的腔室温度有助于抑制或减少翘曲，并有可能提高层间粘合强度。但同时，较高的腔室温度会降低 ABS 和 ASA 的空气过滤效率。 对于 PLA、PETG、TPU、PVA 等低温材料，应禁用此选项（设置为 0），因为腔室温度应较低，以避免热断时材料软化导致挤出机堵塞。 如果启用，此参数还会设置一个名为 chamber_temple 的 G-code 变量，该变量可用于将所需的腔室温度传递给打印启动宏，或热浸宏，如下所示：PRINT_START（其他变量）CHAMBER_TEMP=[cham​​ber_Temperature]。如果您的打印机不支持 M141/M191 命令，或者如果您希望在未安装活动室加热器的情况下在打印启动宏中处理热浸，则这可能很有用。" +msgstr "" +"对于 ABS、ASA、PC 和 PA 等高温材料，较高的腔体温度有助于抑制或减少翘曲，并有可能提高层间粘合强度。但同时，较高的腔体温度会降低 ABS 和 ASA 的空气过滤效率。\n" +"\n" +"对于 PLA、PETG、TPU、PVA 等低温材料，应禁用此选项（设置为 0），因为腔体温度应较低，以避免材料在喉管处软化导致挤出机堵塞。\n" +"\n" +"如果启用，此参数还会设置一个名为 chamber_temperature 的 G-code 变量，可用于将所需的腔体温度传递给打印起始宏或热浸泡宏，例如：PRINT_START (其他变量) CHAMBER_TEMP=[chamber_temperature]。如果您的打印机不支持 M141/M191 命令，或者在未安装主动腔体加热器时希望在打印起始宏中处理热浸泡，这可能会很有用。" # AI Translated msgid "" @@ -19578,15 +20599,15 @@ msgid "" "\n" "Unlike the \"Target\" chamber temperature, this option does not emit any M141/M191 commands; it only exposes the value to your custom G-code. It should not exceed the \"Target\" chamber temperature." msgstr "" -"这是打印应当开始时的机箱温度，此时机箱会继续朝“目标”机箱温度加热。例如，将目标设为 60、最低设为 50，即可在机箱达到 50℃ 时开始打印，而无需等待达到完整的 60℃。\n" +"这是打印应当开始时的腔体温度，此时腔体会继续朝“目标”腔体温度加热。例如，将目标设为 60、最低设为 50，即可在腔体达到 50℃ 时开始打印，而无需等待达到完整的 60℃。\n" "\n" "它会设置一个名为 chamber_minimal_temperature 的 G-code 变量，可以传递给您的打印起始宏或热浸泡宏，例如：PRINT_START (其他变量) CHAMBER_MIN_TEMP=[chamber_minimal_temperature]。\n" "\n" -"与“目标”机箱温度不同，此选项不会发出任何 M141/M191 命令；它只会将该值暴露给您的自定义 G-code。它不应超过“目标”机箱温度。" +"与“目标”腔体温度不同，此选项不会发出任何 M141/M191 命令；它只会将该值暴露给您的自定义 G-code。它不应超过“目标”腔体温度。" # AI Translated msgid "Chamber minimal temperature" -msgstr "最低机箱温度" +msgstr "最低腔体温度" msgid "Nozzle temperature after the first layer" msgstr "除首层外的其它层的喷嘴温度" @@ -19594,8 +20615,9 @@ msgstr "除首层外的其它层的喷嘴温度" msgid "Detect thin walls" msgstr "检查薄壁" +# AI Translated msgid "This detects thin walls which can’t contain two lines and uses a single line to print. It may not print as well because it’s not a closed loop." -msgstr "检查无法容纳两条走线的薄壁。使用单条走线打印。可能会打地不是很好，因为走线不再闭合。" +msgstr "检查无法容纳两条走线的薄壁，并使用单条走线打印。由于走线不再闭合，打印效果可能不太好。" msgid "This G-code is inserted when filament is changed, including T commands to trigger tool change." msgstr "换料时插入的G-code，包括T命令。" @@ -19603,29 +20625,36 @@ msgstr "换料时插入的G-code，包括T命令。" msgid "This G-code is inserted when the extrusion role is changed." msgstr "当挤出类型改变时会插入此G-code" +# AI Translated msgid "Change extrusion role G-code (filament)" -msgstr "挤出类型更换 G-code（耗材）" +msgstr "挤出类型更换 G-code（耗材丝）" +# AI Translated msgid "This G-code is inserted when the extrusion role is changed for the active filament." -msgstr "当当前耗材的挤出类型发生变化时插入此 G-code。" +msgstr "当当前耗材丝的挤出类型发生变化时插入此 G-code。" +# AI Translated msgid "Line width for top surfaces. If expressed as a %, it will be computed over the nozzle diameter." -msgstr "顶面的线宽。如果以 % 表示，它将基于喷嘴直径来计算。" +msgstr "顶面的线宽。如果以%表示，将根据喷嘴直径计算。" msgid "This is the speed for solid top surface infill." msgstr "顶面实心填充的速度" +# AI Translated msgid "Top shell layers" -msgstr "顶部壳体层数" +msgstr "顶部外壳层数" +# AI Translated msgid "This is the number of solid layers of top shell, including the top surface layer. When the thickness calculated by this value is thinner than the top shell thickness, the top shell layers will be increased" -msgstr "顶部壳体实心层层数，包括顶面。当由该层数计算的厚度小于顶部壳体厚度，切片时会增加顶部壳体的层数" +msgstr "顶部外壳实心层层数，包括顶面。当由该层数计算的厚度小于顶部外壳厚度，切片时会增加顶部外壳的层数" +# AI Translated msgid "Top shell thickness" -msgstr "顶部壳体厚度" +msgstr "顶部外壳厚度" +# AI Translated msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers." -msgstr "如果由顶部壳体层数算出的厚度小于这个数值，那么切片时将自动增加顶部壳体层数。这能够避免当层高很小时，顶部壳体过薄。0 表示关闭这个设置，同时顶部壳体的厚度完全由顶部壳体层数决定" +msgstr "如果由顶部外壳层数算出的厚度小于这个数值，那么切片时将自动增加顶部外壳层数。这能够避免当层高很小时，顶部外壳过薄。0 表示关闭这个设置，同时顶部外壳的厚度完全由顶部外壳层数决定。" # AI Translated msgid "Separated infills" @@ -19655,7 +20684,7 @@ msgstr "" "选择居中的顶/底面图案（阿基米德和弦、八角螺旋）的居中点放置位置。\n" " - 每个表面：将图案居中于每个单独的表面区域，因此每个岛屿各自对称。\n" " - 每个模型：将图案居中于每个相连的实体。相互接触或重叠的零件共享一个中心；与其余部分分离的零件各自拥有自己的中心。\n" -" - 每个装配体：为整个物体或装配体使用单一的共享中心。" +" - 每个装配体：为整个对象或装配体使用单一的共享中心。" # AI Translated msgid "Each Surface" @@ -19681,6 +20710,7 @@ msgstr "当回抽时，让喷嘴沿着前面的走线方向继续移动，清除 msgid "Wipe distance" msgstr "擦拭距离" +# AI Translated msgid "" "Describe how long the nozzle will move along the last path when retracting.\n" "\n" @@ -19690,7 +20720,7 @@ msgid "" msgstr "" "喷嘴在回抽时将沿着最后路径移动的距离\n" "\n" -"根据擦拭操作的距离以及挤出机/耗材丝回抽的速度和长度，可能需要执行额外的回抽动作以收回剩余的丝材。\n" +"根据擦拭操作的距离以及挤出机/耗材丝回抽的速度和长度，可能需要执行额外的回抽动作以收回剩余的耗材丝。\n" "\n" "在下方的擦拭前回抽量设置中输入一个数值，将在擦拭动作之前执行任何超出部分的回抽，否则超出部分的回抽将在擦拭之后执行。" @@ -19702,8 +20732,9 @@ msgstr "混色子层" msgid "Enable mixed color sublayer splitting. When enabled, layers containing mixed color filaments will be split into sub-layers to achieve color mixing effects." msgstr "启用混色子层拆分。启用后，含有混色耗材丝的层将被拆分为子层，以实现混色效果。" +# AI Translated msgid "The wiping tower can be used to clean up residue on the nozzle and stabilize the chamber pressure inside the nozzle in order to avoid appearance defects when printing objects." -msgstr "擦拭塔可以用来清理喷嘴上的残留料和让喷嘴内部的腔压达到稳定状态，以避免打印物体时出现外观瑕疵。" +msgstr "擦拭塔可以用来清理喷嘴上的残留料和让喷嘴内部的腔压达到稳定状态，以避免打印对象时出现外观瑕疵。" msgid "Internal ribs" msgstr "内部加强筋" @@ -19722,17 +20753,19 @@ msgstr "实际冲刷量等于冲刷量乘数乘以表格单元中的冲刷量" # AI Translated msgid "Flush multiplier (Fast mode)" -msgstr "冲刷倍数（快速模式）" +msgstr "冲刷量乘数（快速模式）" # AI Translated msgid "The flush multiplier used in fast purge mode." -msgstr "快速冲刷模式下使用的冲刷倍数。" +msgstr "快速冲刷模式下使用的冲刷量乘数。" +# AI Translated msgid "Prime volume" -msgstr "清理量" +msgstr "预挤出体积" +# AI Translated msgid "This is the volume of material to prime the extruder with on the tower." -msgstr "擦拭塔上的清理量" +msgstr "在擦拭塔上用于预挤出的材料体积。" # AI Translated msgid "Prime volume mode" @@ -19783,9 +20816,9 @@ msgid "" "\n" "For the wipe tower external perimeters the internal perimeter speed is used, also limited by this setting." msgstr "" -"擦拭塔冲刷和稀疏层的最大打印速度。当冲刷时，如果稀疏填充速度或从耗材最大体积流量计算出的速度较低，则使用最低速度。\n" +"擦拭塔冲刷和稀疏层的最大打印速度。当冲刷时，如果稀疏填充速度或从耗材丝最大体积流量计算出的速度较低，则使用最低速度。\n" "\n" -"当打印稀疏层时，如果稀疏填充速度或从耗材最大体积流量计算出的速度较低，则使用最低速度。\n" +"当打印稀疏层时，如果稀疏填充速度或从耗材丝最大体积流量计算出的速度较低，则使用最低速度。\n" "\n" "增加此速度可能会影响塔的稳定性，同时增加喷嘴与擦拭塔上可能形成的任何斑点碰撞的力。\n" "\n" @@ -19806,13 +20839,14 @@ msgstr "" "擦拭塔外墙类型。\n" "1. 矩形：具有固定宽度和高度的矩形。\n" "2. 圆锥体：底部有圆角的圆锥，有助于稳定擦拭塔。\n" -"3. 肋条：默认墙类型，在塔壁上增加四条肋条以提高稳定性。" +"3. 加强筋：默认墙类型，在塔壁上增加四条加强筋以提高稳定性。" msgid "Rectangle" msgstr "矩形" +# AI Translated msgid "Rib" -msgstr "肋条" +msgstr "加强筋" msgid "Extra rib length" msgstr "额外加强筋长度" @@ -19823,30 +20857,35 @@ msgstr "正值可以增加加强筋墙的尺寸，负值可以减小尺寸。但 msgid "Rib width" msgstr "加强筋宽度" +# AI Translated msgid "Rib width is always less than half the prime tower side length." -msgstr "肋宽度始终小于主塔边长的一半。" +msgstr "加强筋宽度始终小于擦拭塔边长的一半。" msgid "Fillet wall" msgstr "墙加圆角" # AI Translated msgid "The wall of prime tower will fillet." -msgstr "擦拭塔的墙壁将做圆角处理。" +msgstr "擦拭塔的墙将做圆角处理。" +# AI Translated msgid "The extruder to use when printing perimeter of the wipe tower. Set to 0 to use the one that is available (non-soluble would be preferred)." -msgstr "打印擦拭塔周长时使用的挤出机。设置为0将使用唯一的挤出机（尽量使用不可溶的材料）。" +msgstr "打印擦拭塔外墙时使用的挤出机。设置为0将使用可用的挤出机（优先使用非可溶材料）。" +# AI Translated msgid "Purging volumes - load/unload volumes" -msgstr "清理量 - 加载/卸载量" +msgstr "冲刷体积 - 加载/卸载体积" +# AI Translated msgid "This vector saves required volumes to change from/to each tool used on the wipe tower. These values are used to simplify creation of the full purging volumes below." -msgstr "此矢量可保存所需的体积，用于更改每个擦拭塔上工具所使用的from/to体积 。这些值用于简化完全冲刷体积的创建。" +msgstr "此向量保存了在擦拭塔上切换到/离开每个工具头所需的体积。这些值用于简化下方完整冲刷体积的创建。" msgid "Skip points" msgstr "跳过点" +# AI Translated msgid "The wall of prime tower will skip the start points of wipe path." -msgstr "Prime 塔的墙壁将跳过擦拭路径的起点。" +msgstr "擦拭塔的墙将跳过擦拭路径的起点。" msgid "Enable tower interface features" msgstr "启用擦拭塔接触层功能" @@ -19854,26 +20893,32 @@ msgstr "启用擦拭塔接触层功能" msgid "Enable optimized prime tower interface behavior when different materials meet." msgstr "启用优化后的擦拭塔接触层行为，用于不同耗材丝相遇时。" +# AI Translated msgid "Cool down from interface boost during prime tower" -msgstr "擦拭塔期间从接触层加速状态冷却" +msgstr "打印擦拭塔时从接触层升温状态降温" msgid "When interface-layer temperature boost is active, set the nozzle back to print temperature at the start of the prime tower so it cools down during the tower." msgstr "当接触层温度提升处于活动状态时，在擦拭塔开始时将喷嘴温度恢复到打印温度，以便在打印塔期间降温。" +# AI Translated msgid "Infill gap" -msgstr "填补空白" +msgstr "填充间隙" +# AI Translated msgid "Infill gap." -msgstr "填补空白。" +msgstr "填充间隙。" +# AI Translated msgid "Purging after filament change will be done inside objects' infills. This may lower the amount of waste and decrease the print time. If the walls are printed with transparent filament, the mixed color infill will be visible. It will not take effect unless the prime tower is enabled." -msgstr "换料后的过渡料会被用来打印对象的填充。这样可以减少材料浪费和缩短打印时间，但是如果对象的内外墙是采用透明材料打印的，则可以从模型外观上看到内部的混色过渡料。该功能只有在启用料塔的时候才生效。" +msgstr "换料后的过渡料会被用来打印对象的填充。这样可以减少材料浪费和缩短打印时间，但是如果对象的内外墙是采用透明材料打印的，则可以从模型外观上看到内部的混色过渡料。该功能只有在启用擦拭塔的时候才生效。" +# AI Translated msgid "Purging after filament change will be done inside objects' support. This may lower the amount of waste and decrease the print time. It will not take effect unless a prime tower is enabled." -msgstr "换料后的过渡料会被用来打印对象的支撑。这样可以减少材料浪费以及缩短打印时间。该功能只有在启用料塔的时候才生效。" +msgstr "换料后的过渡料会被用来打印对象的支撑。这样可以减少材料浪费以及缩短打印时间。该功能只有在启用擦拭塔的时候才生效。" +# AI Translated msgid "This object will be used to purge the nozzle after a filament change to save filament and decrease the print time. Colors of the objects will be mixed as a result. It will not take effect unless the prime tower is enabled." -msgstr "换料后的过渡料会被用来打印这个对象。这样可以减少材料浪费和缩短打印时间，但是这个对象的外观会是混色的。该功能只有在启用料塔的时候才生效。" +msgstr "换料后的过渡料会被用来打印这个对象。这样可以减少材料浪费和缩短打印时间，但是这个对象的外观会是混色的。该功能只有在启用擦拭塔的时候才生效。" # AI Translated msgid "Belt purge tower object" @@ -19883,11 +20928,13 @@ msgstr "传送带冲刷塔对象" msgid "Marks the auto-generated belt purge prism. Managed automatically; do not set manually." msgstr "标记自动生成的传送带冲刷棱柱。由程序自动管理，请勿手动设置。" +# AI Translated msgid "Maximal bridging distance" -msgstr "最大桥接距离" +msgstr "最大搭桥距离" +# AI Translated msgid "Maximal distance between supports on sparse infill sections." -msgstr "稀疏填充剖面上支撑之间的最大距离。" +msgstr "稀疏填充区域中支撑点之间的最大距离。" msgid "Wipe tower purge lines spacing" msgstr "擦拭塔冲刷线间距" @@ -19905,23 +20952,27 @@ msgstr "用于擦拭塔冲刷线的额外流量。这使冲刷线比正常情况 msgid "Idle temperature" msgstr "待机温度" +# AI Translated msgid "Nozzle temperature when the tool is currently not used in multi-tool setups. This is only used when 'Ooze prevention' is active in Print Settings. Set to 0 to disable." -msgstr "在多工具设置中，当前未使用的工具的喷嘴温度。这仅在打印设置中启用'防滴漏'时使用。设置为0以禁用。" +msgstr "多工具头设备中当前未使用的工具头的喷嘴温度。仅在打印设置中启用'防渗料'时使用。设为0以禁用。" msgid "X-Y hole compensation" msgstr "X-Y 孔洞尺寸补偿" +# AI Translated msgid "Holes in objects will expand or contract in the XY plane by the set value. Positive values make holes bigger and negative values make holes smaller. This function is used to adjust sizes slightly when objects have assembly issues." -msgstr "物体中的孔洞将在XY平面内根据配置值进行扩展或收缩。正值使孔洞变大，负值使孔洞变小。此功能用于在物体出现装配问题时微调尺寸。" +msgstr "对象中的孔洞将在XY平面内根据配置值进行扩展或收缩。正值使孔洞变大，负值使孔洞变小。此功能用于在对象出现装配问题时微调尺寸。" msgid "X-Y contour compensation" msgstr "X-Y 外轮廓尺寸补偿" +# AI Translated msgid "Contours of objects will expand or contract in the XY plane by the set value. Positive values make contours bigger and negative values make contours smaller. This function is used to adjust sizes slightly when objects have assembly issues." -msgstr "物体的外轮廓将在XY平面内根据配置值进行扩展或收缩。正值使轮廓变大，负值使轮廓变小。此功能用于在物体出现装配问题时微调尺寸。" +msgstr "对象的外轮廓将在XY平面内根据配置值进行扩展或收缩。正值使轮廓变大，负值使轮廓变小。此功能用于在对象出现装配问题时微调尺寸。" +# AI Translated msgid "Convert holes to polyholes" -msgstr "将圆孔转换为多边型孔" +msgstr "将圆孔转换为多边形孔" msgid "" "Search for almost-circular holes that span more than one layer and convert the geometry to polyholes. Use the nozzle size and the (biggest) diameter to compute the polyhole.\n" @@ -19930,9 +20981,11 @@ msgstr "" "搜索跨越多层的近似圆形孔，并将几何形状转换为多边形孔。使用喷嘴尺寸和（最大）直径来计算多边形孔。\n" "参见http://hydraraptor.blogspot.com/2011/02/polyholes.html" +# AI Translated msgid "Polyhole detection margin" -msgstr "多边型孔检测边缘" +msgstr "多边形孔检测余量" +# AI Translated #, no-c-format, no-boost-format msgid "" "Maximum defection of a point to the estimated radius of the circle.\n" @@ -19940,12 +20993,12 @@ msgid "" "In mm or in % of the radius." msgstr "" "点到圆半径的最大偏差。\n" -"由于圆柱体通常被导出为大小不同的三角形，因此点可能不在圆周上。\n" -"此设置允许您有一些余地来扩大检测范围。\n" -"以毫米或半径的百分比表示。" +"由于圆柱体通常被导出为大小不同的三角形，因此点可能不在圆周上。此设置允许您有一些余地来扩大检测范围。\n" +"以毫米或半径的百分比（%）表示。" +# AI Translated msgid "Polyhole twist" -msgstr "扭曲多边型孔" +msgstr "多边形孔扭转" msgid "Rotate the polyhole every layer." msgstr "按层旋转多边形孔。" @@ -19971,8 +21024,9 @@ msgstr "将被存储到.gcode和.sl1/.sl1s文件中的图片尺寸，格式如 msgid "Format of G-code thumbnails" msgstr "G-code缩略图的格式" +# AI Translated msgid "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, QOI for low memory firmware." -msgstr "G-Code 缩略图格式: PNG 质量最佳，JPG 尺寸最小，QOI 用于低内存固件" +msgstr "G-Code 缩略图格式：PNG 质量最佳，JPG 尺寸最小，QOI 用于低内存固件。" msgid "Use relative E distances" msgstr "使用相对E距离" @@ -19980,8 +21034,9 @@ msgstr "使用相对E距离" msgid "Relative extrusion is recommended when using \"label_objects\" option. Some extruders work better with this option unchecked (absolute extrusion mode). Wipe tower is only compatible with relative mode. It is recommended on most printers. Default is checked." msgstr "相对挤出建议在使用\"label_objects\"选项时使用。某些挤出机在未选中此选项（绝对挤出模式）时工作得更好。擦拭塔仅与相对模式兼容。建议在大多数打印机上使用。默认为选中状态。" +# AI Translated msgid "The classic wall generator produces walls with constant extrusion width and for very thin areas, gap-fill is used. The Arachne engine produces walls with variable extrusion width." -msgstr "经典墙生成器产生的墙走线具有一致的挤出宽度，对狭窄区域使用填缝。Arachne引擎则产生变线宽的墙走线" +msgstr "经典墙生成器产生的墙走线具有一致的挤出宽度，对狭窄区域使用缝隙填充。Arachne引擎则产生变线宽的墙走线。" msgid "Arachne" msgstr "Arachne" @@ -20013,11 +21068,9 @@ msgstr "从中心开始计算的墙层数，线宽变化需要分布在这些墙 msgid "Minimum feature size" msgstr "最小特征尺寸" +# AI Translated msgid "Minimum thickness of thin features. Model features that are thinner than this value will not be printed, while features thicker than than this value will be widened to the minimum wall width. It's expressed as a percentage over nozzle diameter." -msgstr "" -"薄特征的最小厚度。\n" -"比此值更薄的模型特征将不会被打印，而比此值更厚的特征将被加宽到最小墙宽。\n" -"本设置以喷嘴直径的百分比表示。" +msgstr "薄特征的最小厚度。比此值更薄的模型特征将不会被打印，而比此值更厚的特征将被加宽到最小墙宽。本设置以喷嘴直径的百分比表示。" msgid "Minimum wall length" msgstr "最短墙长度" @@ -20030,7 +21083,7 @@ msgid "" msgstr "" "调整这个值以略过短的、未闭合的墙，因为这些墙可能会增加打印耗时。该值是墙宽的倍数。设置较高的值将移除更多和更长的墙。\n" "\n" -"请注意：底面和顶面将不受此值的影响，原因是防止模型外部出现可见缝隙。调整下方“墙壁和表面”设置中的“单层墙阈值”来调整判断顶面的灵敏度。只有当此设置高于默认值的0.5、或启用了单层顶面时，“单层墙阈值”才会显示。" +"请注意：底面和顶面将不受此值的影响，原因是防止模型外部出现可见缝隙。调整下方“墙和表面”设置中的“单层墙阈值”来调整判断顶面的灵敏度。只有当此设置高于默认值的0.5、或启用了单层顶面时，“单层墙阈值”才会显示。" msgid "Maximum wall resolution" msgstr "最大墙体分辨率" @@ -20051,11 +21104,13 @@ msgstr "首层最小墙宽度" msgid "The minimum wall width that should be used for the first layer is recommended to be set to the same size as the nozzle. This adjustment is expected to enhance adhesion." msgstr "应用于首层的最小墙宽度，建议设置与喷嘴尺寸相同。此调整有助于增强附着力。" +# AI Translated msgid "Minimum wall width" -msgstr "最窄墙宽度" +msgstr "最小墙宽度" +# AI Translated msgid "Width of the wall that will replace thin features (according to the Minimum feature size) of the model. If the Minimum wall width is thinner than the thickness of the feature, the wall will become as thick as the feature itself. It's expressed as a percentage over nozzle diameter." -msgstr "用于替换模型上的细小特征（根据最小特征尺寸决定）的墙线宽。如果最小墙宽度小于最小特征宽度，则墙将变得和特征本身一样厚。本设置以喷嘴直径的百分比表示。" +msgstr "用于替换模型上的细小特征（根据最小特征尺寸决定）的墙线宽。如果最小墙宽度小于特征本身的厚度，则墙将变得和特征本身一样厚。本设置以喷嘴直径的百分比表示。" msgid "Hotend change time" msgstr "热端更换时间" @@ -20066,32 +21121,39 @@ msgstr "热端更换时间。" msgid "Hotend change" msgstr "热端更换" +# AI Translated msgid "When changing the hotend, it is recommended to extrude a certain length of filament from the original nozzle. This helps minimize nozzle oozing." -msgstr "更换热端时，建议从原热端中挤出一定长度的耗材丝。这有助于最大限度地减少喷嘴漏料。" +msgstr "更换热端时，建议从原热端中挤出一定长度的耗材丝。这有助于最大限度地减少喷嘴渗料。" msgid "Extruder change" msgstr "挤出机更换" +# AI Translated msgid "To prevent oozing, the nozzle will perform a reverse travel movement for a certain period after the ramming is complete. The setting define the travel time." -msgstr "为了防止溢料，预冲刷完成后，喷嘴会进行一段时间的反向空驶。该设置用于定义空驶时间。" +msgstr "为了防止渗料，预冲刷完成后，喷嘴会进行一段时间的反向空驶。该设置用于定义空驶时间。" +# AI Translated msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Therefore, the ramming time must be greater than the cooldown time. 0 means disabled." -msgstr "为了防止溢料，预冲刷时会降低喷嘴温度。因此，预冲刷时间必须大于冷却时间。0 表示禁用。" +msgstr "为了防止渗料，预冲刷时会降低喷嘴温度。因此，预冲刷时间必须大于冷却时间。0 表示禁用。" +# AI Translated msgid "The maximum volumetric speed for ramming before extruder change, where -1 means using the maximum volumetric speed." -msgstr "换出挤出机前的最大预冲刷体积速度，-1 表示使用最大体积速度。" +msgstr "换出挤出机前的最大预冲刷体积流量，-1 表示使用最大体积流量。" +# AI Translated msgid "To prevent oozing, the nozzle temperature will be cooled during ramming. Note: only a cooldown command and fan activation are triggered, reaching the target temperature is not guaranteed. 0 means disabled." -msgstr "为防止溢料，预冲刷过程中喷嘴温度会降低。注意：仅触发冷却指令并启动风扇，不保证达到目标温度。0 表示禁用。" +msgstr "为防止渗料，预冲刷过程中喷嘴温度会降低。注意：仅触发冷却指令并启动风扇，不保证达到目标温度。0 表示禁用。" +# AI Translated msgid "The maximum volumetric speed for ramming before a hotend change, where -1 means using the maximum volumetric speed." -msgstr "热端更换前的最大预冲刷体积速度，其中 -1 表示使用最大体积速度。" +msgstr "热端更换前的最大预冲刷体积流量，其中 -1 表示使用最大体积流量。" msgid "length when change hotend" msgstr "换热端时回抽量" +# AI Translated msgid "When this retraction value is modified, it will be used as the amount of filament retracted inside the hotend before changing hotends." -msgstr "当修改此回抽数值时，将用于热端内在更换热端前回抽的耗材量。" +msgstr "当修改此回抽数值时，将用于热端内在更换热端前回抽的耗材丝量。" # AI Translated msgid "Support fast purge mode" @@ -20103,14 +21165,15 @@ msgstr "此打印机是否支持带有优化温度和倍数的快速冲刷模式 # AI Translated msgid "Filament change" -msgstr "更换耗材" +msgstr "更换耗材丝" # AI Translated msgid "The volume of material required to prime the extruder on the tower, excluding a hotend change." msgstr "在塔上预挤出挤出机所需的材料体积，不包括更换热端。" +# AI Translated msgid "The volume of material required to prime the extruder for a hotend change on the tower." -msgstr "换热端所需的擦料塔上的清理量。" +msgstr "在擦拭塔上为更换热端预挤出挤出机所需的材料体积。" # AI Translated msgid "Preheat temperature delta" @@ -20129,14 +21192,17 @@ msgstr "此选项用于自动识别内部实心填充中的狭窄区域。开启 msgid "invalid value " msgstr "无效值 " +# AI Translated msgid "Invalid value when spiral vase mode is enabled: " -msgstr "在旋转花瓶模式时存在无效的值：" +msgstr "在旋转花瓶模式时存在无效的值： " +# AI Translated msgid "Bridge line width must not exceed nozzle diameter: " -msgstr "桥接线宽不得超过喷嘴直径：" +msgstr "桥接线宽不得超过喷嘴直径： " +# AI Translated msgid "too large line width " -msgstr "线宽过大" +msgstr "线宽过大 " # AI Translated #. TRN %1% is the current value, %2% and %3% the lowest and highest allowed values. @@ -20168,8 +21234,9 @@ msgstr "导出多个STL" msgid "Export the objects as multiple STLs to directory." msgstr "将对象导出为多个STL到目录。" +# AI Translated msgid "Slice the plates: 0-all plates, i-plate i, others-invalid" -msgstr "对打印板切片：0-所有板，i-第i个板，其他-无效" +msgstr "对盘切片：0-所有盘，i-第i个盘，其他-无效" msgid "This shows command help." msgstr "显示命令行帮助。" @@ -20180,11 +21247,14 @@ msgstr "同步最新设置" msgid "Update the config values of 3MF to latest." msgstr "将3mf的配置值更新为最新值。" +# AI Translated msgid "Load default filaments" -msgstr "加载默认耗材" +msgstr "加载默认耗材丝" +# AI Translated +# Needs human review: CLI option --load-defaultfila; check "those not loaded" means the unloaded filament slots. msgid "Load first filament as default for those not loaded." -msgstr "加载第一个耗材为默认材料" +msgstr "未加载耗材丝的位置使用第一个耗材丝作为默认耗材丝。" msgid "Minimum save" msgstr "最小保存" @@ -20192,17 +21262,20 @@ msgstr "最小保存" msgid "Export 3MF with minimum size." msgstr "以最小尺寸导出3mf。" +# AI Translated msgid "mtcpp" -msgstr "材料温度补偿" +msgstr "每盘最大三角形数" msgid "max triangle count per plate for slicing" msgstr "切片时每个盘的最大三角形数。" +# AI Translated msgid "mstpp" -msgstr "材料温度暂停" +msgstr "每盘最大切片时间" +# AI Translated msgid "max slicing time per plate in seconds" -msgstr "每板的最大切片耗时（秒）。" +msgstr "每盘的最大切片耗时（秒）" msgid "No check" msgstr "不进行检查" @@ -20236,7 +21309,7 @@ msgstr "检查网格（JSON 输出到 stdout）" # AI Translated msgid "Print a JSON summary of each loaded object to stdout, then exit: its bounding boxes and the convex hull faces it can be laid on, with their normals, areas and centers. These are the faces the --ground-* options choose from. Machine-readable alternative to --info." -msgstr "将每个已加载对象的 JSON 摘要输出到 stdout，然后退出：包括其包围盒，以及可供放置的凸包面及其法线、面积和中心。--ground-* 选项正是从这些面中选择。--info 的机器可读替代方案。" +msgstr "将每个已加载对象的 JSON 摘要输出到 stdout，然后退出：包括其边界框，以及可供放置的凸包面及其法线、面积和中心。--ground-* 选项正是从这些面中选择。--info 的机器可读替代方案。" # AI Translated msgid "Inspect paint (JSON to stdout)" @@ -20244,7 +21317,7 @@ msgstr "检查绘制（JSON 输出到 stdout）" # AI Translated msgid "Print a structured JSON summary of every painted layer (supports, seam, MMU color, fuzzy-skin) already stored on the loaded model — per-state facet count, surface area, and mesh-local bounding box — then exit. Machine-readable alternative to opening the paint gizmos in the GUI." -msgstr "输出已加载模型上已保存的每个绘制图层（支撑、接缝、MMU 颜色、绒毛表面）的结构化 JSON 摘要 — 每种状态的面片数量、表面积和网格局部包围盒 — 然后退出。在图形界面中打开绘制工具的机器可读替代方案。" +msgstr "输出已加载模型上已保存的每个绘制图层（支撑、接缝、MMU 颜色、绒毛表面）的结构化 JSON 摘要（每种状态的面片数量、表面积和网格局部边界框），然后退出。在图形界面中打开绘制小工具的机器可读替代方案。" msgid "Export Settings" msgstr "导出配置" @@ -20348,11 +21421,13 @@ msgstr "加载通用设置" msgid "Load process/machine settings from the specified file." msgstr "从指定文件加载工艺/打印机设置" +# AI Translated msgid "Load Filament Settings" -msgstr "加载耗材设置" +msgstr "加载耗材丝设置" +# AI Translated msgid "Load filament settings from the specified file list." -msgstr "从指定文件加载耗材设置" +msgstr "从指定文件加载耗材丝设置。" msgid "Skip Objects" msgstr "跳过对象" @@ -20360,11 +21435,13 @@ msgstr "跳过对象" msgid "Skip some objects in this print." msgstr "打印过程中跳过一些对象" +# AI Translated msgid "Clone Objects" -msgstr "复制对象" +msgstr "克隆对象" +# AI Translated msgid "Clone objects in the load list." -msgstr "复制加载列表中的对象。" +msgstr "克隆加载列表中的对象。" msgid "Load uptodate process/machine settings when using uptodate" msgstr "更新同步时加载最新工艺/机器设置" @@ -20373,11 +21450,13 @@ msgstr "更新同步时加载最新工艺/机器设置" msgid "load up-to-date process/machine settings from the specified file when using up-to-date" msgstr "在使用 up-to-date 时，从指定的文件中加载最新的工艺/机器设置。" +# AI Translated msgid "Load uptodate filament settings when using uptodate" -msgstr "更新同步时加载最新耗材设置" +msgstr "更新同步时加载最新耗材丝设置" +# AI Translated msgid "Load uptodate filament settings from the specified file when using uptodate." -msgstr "在使用 同步最新设置 时，从指定文件加载最新的耗材设置。" +msgstr "在使用“同步最新设置”时，从指定文件加载最新的耗材丝设置。" msgid "Downward machines check" msgstr "向下兼容机器检查" @@ -20409,11 +21488,13 @@ msgstr "输出路径" msgid "This is the output directory for exported files." msgstr "导出文件的输出路径。" +# AI Translated msgid "Export statistics" -msgstr "" +msgstr "导出统计信息" +# AI Translated msgid "Write the statistics of each sliced plate as JSON, as plate_N.statistics.json next to its G-code in the output directory and inside the 3MF of --export-3mf: print time, filament and feature totals, and the same per layer and per object." -msgstr "" +msgstr "以 JSON 格式写入每个已切片盘的统计信息：在输出目录中其 G-code 旁写入 plate_N.statistics.json，并写入 --export-3mf 导出的 3MF 内。内容包括打印时间、耗材丝和各走线类型的总量，以及按层和按对象的相应统计。" msgid "Debug level" msgstr "调试等级" @@ -20439,17 +21520,21 @@ msgstr "加载自定义 G-code" msgid "Load custom G-code from json." msgstr "从 json 文件加载自定义 G-code" +# AI Translated msgid "Load filament IDs" -msgstr "加载耗材ID" +msgstr "加载耗材丝ID" +# AI Translated msgid "Load filament IDs for each object." -msgstr "为每个对象加载耗材ID。" +msgstr "为每个对象加载耗材丝ID。" +# AI Translated msgid "Allow multiple colors on one plate" -msgstr "允许在一个打印板上使用多种颜色" +msgstr "允许在一个盘上使用多种颜色" +# AI Translated msgid "If enabled, Arrange will allow multiple colors on one plate." -msgstr "如果启用，自动排列将允许在一个打印板上使用多种颜色" +msgstr "如果启用，自动摆放将允许在一个盘上使用多种颜色。" msgid "Allow rotation when arranging" msgstr "排列时允许旋转" @@ -20474,8 +21559,9 @@ msgstr "如果启用，排列将在放置对象时，避开挤出校准区域。 msgid "Skip modified G-code in 3MF" msgstr "跳过 3MF 中修改过的 G-code" +# AI Translated msgid "Skip the modified G-code in 3MF from printer or filament presets." -msgstr "跳过 3MF 中来自打印机或耗材预设中修改过的 G-code。" +msgstr "跳过 3MF 中来自打印机或耗材丝预设中修改过的 G-code。" msgid "MakerLab name" msgstr "MakerLab 名称" @@ -20516,14 +21602,17 @@ msgstr "包含自定义 G-code 块开头的Z轴抬升。" msgid "Position of the extruder at the beginning of the custom G-code block. If the custom G-code travels somewhere else, it should write to this variable so OrcaSlicer knows where it travels from when it gets control back." msgstr "自定义 G-code 块开始时挤出机的位置。如果自定义 G-code 移动到了其他方位，应将该方位写入此变量，以便 OrcaSlicer 在重新取得控制时知道其起始位置。" +# AI Translated msgid "Retraction state at the beginning of the custom G-code block. If the custom G-code moves the extruder axis, it should write to this variable so OrcaSlicer de-retracts correctly when it gets control back." -msgstr "自定义 G-code 块开始时的回抽状态。如果自定义 G-code 移动了挤出轴，应将该轴状态写入此变量，以便 OrcaSlicer 在重新取得控制时能够正确重装填" +msgstr "自定义 G-code 块开始时的回抽状态。如果自定义 G-code 移动了挤出轴，应将该轴状态写入此变量，以便 OrcaSlicer 在重新取得控制时能够正确执行装填回抽。" +# AI Translated msgid "Extra de-retraction" -msgstr "额外重装填" +msgstr "额外装填回抽" +# AI Translated msgid "Currently planned extra extruder priming after de-retraction." -msgstr "在当前挤出头在装填后，进行额外的预挤出。" +msgstr "当前计划在装填回抽之后进行的额外挤出机预挤出量。" msgid "Absolute E position" msgstr "绝对 E 位置" @@ -20552,11 +21641,13 @@ msgstr "打印中是否生成擦拭塔。" msgid "Initial extruder" msgstr "初始挤出机" +# AI Translated msgid "Zero-based index of the first extruder used in the print. Same as initial_tool." -msgstr "打印中使用的第一个挤出机的从零开始的索引。与初始工具相同。" +msgstr "打印中使用的第一个挤出机的从零开始的索引。与 initial_tool 相同。" +# AI Translated msgid "Initial tool" -msgstr "初始工具" +msgstr "初始工具头" msgid "Zero-based index of the first extruder used in the print. Same as initial_extruder." msgstr "打印中使用的第一个挤出机的从零开始的索引。与 initial_extruder 相同。" @@ -20576,8 +21667,9 @@ msgstr "挤出机总数，无论当前打印中是否使用它们。" msgid "Has single extruder MM priming" msgstr "单挤出机多材料预挤出" +# AI Translated msgid "Are the extra multi-material priming regions used in this print?" -msgstr "此打印中是否使用额外的多材料预注区域？" +msgstr "此打印中是否使用额外的多材料预挤出区域？" # AI Translated msgid "Initial no support extruder" @@ -20594,7 +21686,7 @@ msgstr "位于包裹检测区域内" # AI Translated msgid "Indicates if the first layer overlaps with the head wrap zone." -msgstr "指示第一层是否与包裹检测区域重叠。" +msgstr "指示首层是否与包裹检测区域重叠。" # AI Translated msgid "Current bed type" @@ -20631,11 +21723,13 @@ msgstr "当前 IDEX/IQEX 并行打印模式的原始模式 G-code 模板（占 msgid "Volume per extruder" msgstr "各挤出机的体积" +# AI Translated msgid "Total filament volume extruded per extruder during the entire print." -msgstr "整个打印过程中每个挤出机挤出的总耗材体积" +msgstr "整个打印过程中每个挤出机挤出的总耗材丝体积。" +# AI Translated msgid "Total tool changes" -msgstr "总工具更换次数" +msgstr "总工具头更换次数" msgid "Number of tool changes during the print." msgstr "打印期间的工具头更换次数。" @@ -20643,20 +21737,23 @@ msgstr "打印期间的工具头更换次数。" msgid "Total volume" msgstr "总体积" +# AI Translated msgid "Total volume of filament used during the entire print." -msgstr "整个打印过程中使用的耗材总体积。" +msgstr "整个打印过程中使用的耗材丝总体积。" msgid "Weight per extruder" msgstr "各挤出机的重量" +# AI Translated msgid "Weight per extruder extruded during the entire print. Calculated from filament_density value in Filament Settings." -msgstr "整个打印过程中各个挤出机所挤出的重量。根据耗材设置中的耗材密度值计算。" +msgstr "整个打印过程中各个挤出机所挤出的重量。根据耗材丝设置中的 filament_density 值计算。" msgid "Total weight" msgstr "总重量" +# AI Translated msgid "Total weight of the print. Calculated from filament_density value in Filament Settings." -msgstr "打印件的总重量。根据耗材设置中的耗材密度值计算。" +msgstr "打印件的总重量。根据耗材丝设置中的 filament_density 值计算。" msgid "Total layer count" msgstr "总层数" @@ -20667,11 +21764,13 @@ msgstr "整个打印中的层数量。" msgid "Print time (normal mode)" msgstr "打印耗时（正常模式）" +# AI Translated msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as print_time." -msgstr "在普通模式（即非静音模式）下打印时的预计打印耗时。与“打印耗时”类似。" +msgstr "在正常模式（即非静音模式）下打印时的预计打印耗时。与 print_time 相同。" +# AI Translated msgid "Estimated print time when printed in normal mode (i.e. not in silent mode). Same as normal_print_time." -msgstr "在正常模式（即非静音模式）下打印时的预计打印耗时。与“普通打印耗时”类似。" +msgstr "在正常模式（即非静音模式）下打印时的预计打印耗时。与 normal_print_time 相同。" msgid "Print time (silent mode)" msgstr "打印耗时（静音模式）" @@ -20679,26 +21778,31 @@ msgstr "打印耗时（静音模式）" msgid "Estimated print time when printed in silent mode." msgstr "在静音模式下打印时的预计打印耗时。" +# AI Translated msgid "Total cost of all material used in the print. Calculated from filament_cost value in Filament Settings." -msgstr "打印中使用的所有耗材的总成本。根据耗材设置中的 filament_cost 值计算。" +msgstr "打印中使用的所有耗材丝的总成本。根据耗材丝设置中的 filament_cost 值计算。" msgid "Total wipe tower cost" msgstr "擦拭塔总成本" +# AI Translated msgid "Total cost of the material wasted on the wipe tower. Calculated from filament_cost value in Filament Settings." -msgstr "擦拭塔上浪费的材料的总成本。根据耗材设置中的 filament_cost 值计算。" +msgstr "擦拭塔上浪费的材料的总成本。根据耗材丝设置中的 filament_cost 值计算。" msgid "Wipe tower volume" msgstr "擦拭塔体积" +# AI Translated msgid "Total filament volume extruded on the wipe tower." -msgstr "擦拭塔上已挤出耗材的总体积。" +msgstr "擦拭塔上已挤出耗材丝的总体积。" +# AI Translated msgid "Used filament" -msgstr "已用耗材" +msgstr "已用耗材丝" +# AI Translated msgid "Total length of filament used in the print." -msgstr "打印中使用的耗材的总长度。" +msgstr "打印中使用的耗材丝的总长度。" # AI Translated msgid "Print time (total seconds)" @@ -20739,8 +21843,9 @@ msgstr "打印耗时（秒数部分）" msgid "Estimated print time second component (normal mode). Replaced with actual value during post-processing." msgstr "预计打印耗时的秒数部分（正常模式）。在后处理时将替换为实际值。" +# AI Translated msgid "Filament length (meters)" -msgstr "耗材长度（米）" +msgstr "耗材丝长度（米）" msgid "Total filament length used in meters. Replaced with actual value during post-processing." msgstr "使用的耗材丝总长度（以米为单位）。在后处理期间替换为实际值。" @@ -20794,17 +21899,21 @@ msgstr "该向量有两个元素：边界框的 X 和 Y 维度。值以毫米为 msgid "First layer convex hull" msgstr "首层凸包" +# AI Translated msgid "Vector of points of the first layer convex hull. Each element has the following format:'[x, y]' (x and y are floating-point numbers in mm)." -msgstr "第一层凸包的点向量。每个元素的格式如下：'[x, y]'（x 和 y 是以 mm 为单位的浮点数）。" +msgstr "首层凸包的点向量。每个元素的格式如下：'[x, y]'（x 和 y 是以 mm 为单位的浮点数）。" +# AI Translated msgid "Bottom-left corner of the first layer bounding box" -msgstr "第一层边界框的左下角" +msgstr "首层边界框的左下角" +# AI Translated msgid "Top-right corner of the first layer bounding box" -msgstr "第一层边界框的右上角" +msgstr "首层边界框的右上角" +# AI Translated msgid "Size of the first layer bounding box" -msgstr "第一层边界框" +msgstr "首层边界框尺寸" msgid "Bottom-left corner of print bed bounding box" msgstr "热床边界框的左下角" @@ -20812,8 +21921,9 @@ msgstr "热床边界框的左下角" msgid "Top-right corner of print bed bounding box" msgstr "热床边界框的右上角" +# AI Translated msgid "Size of the print bed bounding box" -msgstr "热床边界框" +msgstr "热床边界框尺寸" # AI Translated msgid "First layer center without wipe tower" @@ -20841,19 +21951,19 @@ msgstr "初始挤出机的首层热床温度。与 bed_temperature_initial_layer # AI Translated msgid "Vector of chamber temperatures for each extruder/filament." -msgstr "每个挤出机/耗材丝的机箱温度向量。" +msgstr "每个挤出机/耗材丝的腔体温度向量。" # AI Translated msgid "Vector of minimal chamber temperatures for each extruder/filament." -msgstr "每个挤出机/耗材丝的最低机箱温度向量。" +msgstr "每个挤出机/耗材丝的最低腔体温度向量。" # AI Translated msgid "Overall chamber temperature" -msgstr "整体机箱温度" +msgstr "整体腔体温度" # AI Translated msgid "Overall chamber temperature. This value is the maximum chamber temperature of any extruder/filament used." -msgstr "整体机箱温度。该值为所用挤出机/耗材丝中的最高机箱温度。" +msgstr "整体腔体温度。该值为所用挤出机/耗材丝中的最高腔体温度。" # AI Translated msgid "Vector of first layer bed temperatures for each extruder/filament. Provides the same value as bed_temperature_initial_layer." @@ -20891,11 +22001,13 @@ msgstr "打印预设名称" msgid "Name of the print preset used for slicing." msgstr "用于切片的打印预设的名称。" +# AI Translated msgid "Filament preset name" -msgstr "耗材预设名称" +msgstr "耗材丝预设名称" +# AI Translated msgid "Names of the filament presets used for slicing. The variable is a vector containing one name for each extruder." -msgstr "用于切片的耗材预设的名称。该变量是一个向量，包含每个挤出机的名称。" +msgstr "用于切片的耗材丝预设的名称。该变量是一个向量，包含每个挤出机的名称。" msgid "Printer preset name" msgstr "打印机预设名称" @@ -20903,33 +22015,38 @@ msgstr "打印机预设名称" msgid "Name of the printer preset used for slicing." msgstr "用于切片的打印机预设的名称。" +# AI Translated msgid "Physical printer name" -msgstr "实际打印件名称" +msgstr "物理打印机名称" +# AI Translated msgid "Name of the physical printer used for slicing." -msgstr "用于切片的，实际的打印机的名字。" +msgstr "用于切片的物理打印机的名称。" msgid "Layer number" msgstr "层编号" # AI Translated msgid "Index of the current layer. Zero-based (i.e. first layer is number 0), except in extrusion role change G-code, where it is one-based." -msgstr "当前层的索引。从 0 开始（即第一层为 0），但在挤出类型更换 G-code 中从 1 开始。" +msgstr "当前层的索引。从 0 开始（即首层为 0），但在挤出类型更换 G-code 中从 1 开始。" msgid "Layer Z" msgstr "层的 Z 坐标" +# AI Translated msgid "Height of the current layer above the print bed, measured to the top of the layer." -msgstr "打印床上方当前层的高度，测量到层的顶部。" +msgstr "当前层在热床上方的高度，测量到该层的顶部。" msgid "Maximal layer Z" msgstr "最顶层 Z 坐标" +# AI Translated msgid "Height of the last layer above the print bed." -msgstr "最顶层相对打印板高度" +msgstr "最后一层在热床上方的高度。" +# AI Translated msgid "Filament extruder ID" -msgstr "耗材挤出机ID" +msgstr "耗材丝挤出机ID" msgid "The current extruder ID. The same as current_extruder." msgstr "当前挤出机ID，与current_extruder相同" @@ -21239,12 +22356,13 @@ msgstr "" "此对象的 XY 尺寸补偿不会生效，因为对象包含了涂色操作。\n" "XY 尺寸补偿不能与涂色功能结合使用。" +# AI Translated msgid "" "An object has enabled XY Size compensation which will not be used because it is also fuzzy skin painted.\n" "XY Size compensation cannot be combined with fuzzy skin painting." msgstr "" -"此对象已启用 XY 尺寸补偿，但不会使用该补偿，因为对象包含了绒毛皮肤绘制。\n" -"XY 尺寸补偿不能与绒毛皮肤绘制结合使用。" +"此对象已启用 XY 尺寸补偿，但不会使用该补偿，因为对象包含了绒毛表面绘制。\n" +"XY 尺寸补偿不能与绒毛表面绘制结合使用。" msgid "Object name" msgstr "对象名称" @@ -21668,8 +22786,9 @@ msgstr "未知的文件格式。输入文件的扩展名必须为 .stl、.obj msgid "Unknown file format: input file must have .3mf or .zip.amf extension." msgstr "未知的文件格式。输入文件的扩展名必须为 .3mf 或 .zip.amf。" +# AI Translated msgid "load_obj: failed to parse" -msgstr "加载对象：无法分析" +msgstr "load_obj：解析失败" msgid "load mtl in obj: failed to parse" msgstr "在obj中加载mtl：解析失败" @@ -21692,8 +22811,9 @@ msgstr "管理结果" msgid "Manual Calibration" msgstr "手动校准" +# AI Translated msgid "Result can be read by human eyes." -msgstr "结果可藉由人眼观察。" +msgstr "结果可通过肉眼判读。" msgid "Auto-Calibration" msgstr "自动校准" @@ -21701,8 +22821,9 @@ msgstr "自动校准" msgid "We would use Lidar to read the calibration result" msgstr "我们将使用激光雷达来读取校准结果。" +# AI Translated msgid "Prev" -msgstr "上一个" +msgstr "上一步" msgid "Recalibration" msgstr "重新校准" @@ -21713,8 +22834,9 @@ msgstr "校准" msgid "How can I use calibration results?" msgstr "如何使用校准结果？" +# AI Translated msgid "You could change the Flow Dynamics Calibration Factor in material editing" -msgstr "您可以在编辑材料时修改流量动态校准因子。" +msgstr "您可以在编辑材料时修改动态流量校准因子" msgid "" "The current firmware version of the printer does not support calibration.\n" @@ -21732,6 +22854,7 @@ msgstr "动态流量" msgid "Max Volumetric Speed" msgstr "最大体积流量" +# AI Translated #, c-format, boost-format msgid "" "Please input valid values:\n" @@ -21744,7 +22867,7 @@ msgstr "" "起始值：>= %.1f\n" "结束值：<= %.1f\n" "结束值：> 起始值\n" -"步进长度：>= %.3f）" +"步进长度：>= %.3f" msgid "The name cannot be empty." msgstr "名称不能为空。" @@ -21775,8 +22898,9 @@ msgstr "无打印机连接！" msgid "Printer is not connected yet." msgstr "打印机尚未连接。" +# AI Translated msgid "Please select filament to calibrate." -msgstr "请选择要校准的耗材。" +msgstr "请选择要校准的耗材丝。" msgid "The input value size must be 3." msgstr "输入值大小必须为3。" @@ -21797,12 +22921,13 @@ msgstr "仅保存一个同名结果：%s。您确定要覆盖其他结果吗？" msgid "There is already a previous calibration result with the same name: %s. Only one result with a name is saved. Are you sure you want to overwrite the previous result?" msgstr "已经存在一个同名的历史校准结果：%s。相同名称的结果只会保存一个。您确定要覆盖历史结果吗？" +# AI Translated #, c-format, boost-format msgid "" "Within the same extruder, the name(%s) must be unique when the filament type, nozzle diameter, and nozzle flow are the same.\n" "Are you sure you want to override the historical result?" msgstr "" -"在同一挤出机内，耗材类型、喷嘴直径和喷嘴流量相同时，名称（%s）必须是唯一的。\n" +"在同一挤出机内，耗材丝类型、喷嘴直径和喷嘴流量相同时，名称（%s）必须是唯一的。\n" "您确定要覆盖历史结果吗？" # AI Translated @@ -21823,8 +22948,9 @@ msgstr "动态流量校准的结果已保存至打印机。" msgid "Internal Error" msgstr "内部错误" +# AI Translated msgid "Please select at least one filament for calibration" -msgstr "请至少选择一种耗材进行校准。" +msgstr "请至少选择一种耗材丝进行校准。" msgid "Flow rate calibration result has been saved to preset." msgstr "流量比例校准结果已保存到预设" @@ -21835,20 +22961,22 @@ msgstr "最大体积流量校准结果已保存到预设值" msgid "When do you need Flow Dynamics Calibration" msgstr "在什么情况下需要进行动态流量校准" +# AI Translated msgid "" "We now have added the auto-calibration for different filaments, which is fully automated and the result will be saved into the printer for future use. You only need to do the calibration in the following limited cases:\n" "1. If you introduce a new filament of different brands/models or the filament is damp;\n" "2. If the nozzle is worn out or replaced with a new one;\n" "3. If the max volumetric speed or print temperature is changed in the filament setting." msgstr "" -"我们现在添加了针对不同耗材的自动校准。这是完全自动化的，结果将保存到打印机中以供将来使用。您仅需在下列的有限情况下才需要进行校准：\n" -"1. 如果更换不同品牌/型号的新耗材，或耗材受潮；\n" +"我们现在添加了针对不同耗材丝的自动校准。这是完全自动化的，结果将保存到打印机中以供将来使用。您仅需在下列的有限情况下才需要进行校准：\n" +"1. 如果更换不同品牌/型号的新耗材丝，或耗材丝受潮；\n" "2. 喷嘴磨损或更换了新喷嘴；\n" -"3. 在耗材设置中更改了最大体积流量或打印温度。" +"3. 在耗材丝设置中更改了最大体积流量或打印温度。" msgid "About this calibration" msgstr "关于此校准" +# AI Translated msgid "" "Please find the details of Flow Dynamics Calibration from our wiki.\n" "\n" @@ -21860,15 +22988,17 @@ msgid "" msgstr "" "请从我们的wiki中找到动态流量校准的详细信息。\n" "\n" -"通常情况下，校准是不必要的。当您开始单色/单耗材打印，并在打印开始菜单中勾选了“动态流量校准”选项时，打印机将按照旧的方式在打印前校准耗材；当您开始多色/多耗材打印时，打印机将在每次换耗材时使用默认的补偿参数，这在大多数情况下会产生良好的效果。\n" +"通常情况下，校准是不必要的。当您开始单色/单材料打印，并在打印开始菜单中勾选了“动态流量校准”选项时，打印机将按照旧的方式在打印前校准耗材丝；当您开始多色/多材料打印时，打印机将在每次换耗材丝时使用默认的补偿参数，这在大多数情况下会产生良好的效果。\n" "\n" -"有些情况可能导致校准结果不可靠，例如打印板的附着力不足。清洗构建或者使用胶水可以增强打印板的附着力。您可以在我们的wiki上找到更多相关信息。\n" +"有些情况可能导致校准结果不可靠，例如打印板的附着力不足。清洗打印板或者使用胶水可以增强打印板的附着力。您可以在我们的wiki上找到更多相关信息。\n" "\n" -"在我们的测试中，校准结果有约 10 % 的波动，这可能导致每次校准的结果略有不同。我们仍在调查根本原因，并通过新的更新进行改进。" +"在我们的测试中，校准结果有约百分之十的波动，这可能导致每次校准的结果略有不同。我们仍在调查根本原因，并通过新的更新进行改进。" +# AI Translated msgid "When to use Flow Rate Calibration" -msgstr "何时使用流量校准" +msgstr "何时使用流量比例校准" +# AI Translated msgid "" "After using Flow Dynamics Calibration, there might still be some extrusion issues, such as:\n" "1. Over-Extrusion: Excess material on your printed object, forming blobs or zits, or the layers seem thicker than expected and not uniform\n" @@ -21876,20 +23006,21 @@ msgid "" "3. Poor Surface Quality: The surface of your prints seems rough or uneven\n" "4. Weak Structural Integrity: Prints break easily or don't seem as sturdy as they should be" msgstr "" -"使用流量动态校准后，仍可能出现一些挤出问题，例如：\n" +"使用动态流量校准后，仍可能出现一些挤出问题，例如：\n" "1. 过度挤出：打印件上的材料过多，形成凸起或小球；或每层外观比预期要厚、不均匀。\n" -"2. 挤出不足：每层非常薄，填充强度不足；或在缓慢打印时，打印件顶层有缺陷。\n" +"2. 挤出不足：每层非常薄，填充强度不足；或即使低速打印，打印件顶层仍有缝隙。\n" "3. 表面质量差：打印件表面外观粗糙或不均匀。\n" "4. 结构强度差：打印件容易断裂；或没有其预期的稳固性。" +# AI Translated msgid "In addition, Flow Rate Calibration is crucial for foaming materials like LW-PLA used in RC planes. These materials expand greatly when heated, and calibration provides a useful reference flow rate." -msgstr "此外，对于航模用途的轻质发泡PLA（LW-PLA）等类似的发泡材料，流量校准非常重要。因为这些材料在加热时会大幅膨胀，而校准则能提供有用的流量率参考。" +msgstr "此外，对于航模用途的轻质发泡PLA（LW-PLA）等类似的发泡材料，流量比例校准非常重要。因为这些材料在加热时会大幅膨胀，而校准则能提供有用的流量比例参考。" +# AI Translated msgid "Flow Rate Calibration measures the ratio of expected to actual extrusion volumes. The default setting works well in Bambu Lab printers and official filaments as they were pre-calibrated and fine-tuned. For a regular filament, you usually won't need to perform a Flow Rate Calibration unless you still see the listed defects after you have done other calibrations. For more details, please check out the wiki article." -msgstr "" -"流量校准的原理是，测量实际挤出量，并将其与预期挤出量进行比较，得到两者比率。\n" -"默认设置在Bambu Lab的打印机和官方耗材上表现良好，因为它们已经过预先校准和微调。对于普通的耗材，通常不需要执行流量校准，除非您在完成其他校准后仍然发现上述缺陷。如需更多详细信息，请查阅wiki文章。" +msgstr "流量比例校准的原理是，测量实际挤出量，并将其与预期挤出量进行比较，得到两者比率。默认设置在Bambu Lab的打印机和官方耗材丝上表现良好，因为它们已经过预先校准和微调。对于普通的耗材丝，通常不需要执行流量比例校准，除非您在完成其他校准后仍然发现上述缺陷。如需更多详细信息，请查阅wiki文章。" +# AI Translated msgid "" "Auto Flow Rate Calibration utilizes Bambu Lab's Micro-Lidar technology, directly measuring the calibration patterns. However, please be advised that the efficacy and accuracy of this method may be compromised with specific types of materials. Particularly, filaments that are transparent or semi-transparent, have sparkles, or have a highly-reflective finish may not be suitable for this calibration and can produce less-than-desirable results.\n" "\n" @@ -21897,11 +23028,11 @@ msgid "" "\n" "Caution: Flow Rate Calibration is an advanced process, to be attempted only by those who fully understand its purpose and implications. Incorrect usage can lead to sub-par prints or printer damage. Please make sure to carefully read and understand the process before doing it." msgstr "" -"自动流量校准采用Bambu Lab的微型激光雷达技术，用以直接测量校准图案。然而，请注意，这种方法的效率和准确性可能会受到特殊耗材材质的影响。特别是具有透明、半透明、闪光粉、高反射率等特征的耗材可能不适合此校准，并有可能产生不理想的结果。\n" +"自动流量比例校准采用Bambu Lab的Micro-Lidar技术，用以直接测量校准图案。然而，请注意，这种方法的有效性和准确性可能会受到特殊耗材丝材质的影响。特别是具有透明、半透明、闪光粉、高反射率等特征的耗材丝可能不适合此校准，并有可能产生不理想的结果。\n" "\n" -"校准结果可能会因次数或耗材变化而有所不同。我们仍在通过固件更新不断提高此项校准的准确性和兼容性。\n" +"校准结果可能会因次数或耗材丝变化而有所不同。我们仍在通过固件更新不断提高此项校准的准确性和兼容性。\n" "\n" -"注意：流量校准是一项高级操作过程，只有完全理解其目的和影响的用户方可尝试。不正确使用可能导致打印质量不佳，甚至损坏挤出机等设备。请确保在执行前仔细阅读和理解相关过程。" +"注意：流量比例校准是一项高级操作过程，只有完全理解其目的和影响的用户方可尝试。不正确使用可能导致打印质量不佳，甚至损坏打印机。请确保在执行前仔细阅读和理解相关过程。" msgid "When you need Max Volumetric Speed Calibration" msgstr "当您需要最大体积流量校准时" @@ -21915,13 +23046,14 @@ msgstr "使用以下选项打印时，建议进行最大体积流量校准：" msgid "material with significant thermal shrinkage/expansion, such as..." msgstr "具有显著热收缩/膨胀的材料，例如..." +# AI Translated msgid "materials with inaccurate filament diameter" -msgstr "直径不准确的耗材" +msgstr "直径不准确的耗材丝" # AI Translated #, boost-format msgid "%1% Flow Rate Calibrated" -msgstr "%1% 流量已校准" +msgstr "%1% 流量比例已校准" # AI Translated #, boost-format @@ -21933,8 +23065,9 @@ msgstr "%1% 温度已校准" msgid "%1% Max Vol Speed Calibrated" msgstr "%1% 最大体积流量已校准" +# AI Translated msgid "We found the best Flow Dynamics Calibration Factor" -msgstr "我们找到了最佳的流量动态校准因子。" +msgstr "我们找到了最佳的动态流量校准因子" msgid "Part of the calibration failed! You may clean the plate and retry. The failed test result would be dropped." msgstr "有部分校准失败！您可以清理打印板后重试。失败的测试结果将被丢弃。" @@ -21954,8 +23087,9 @@ msgstr "喷嘴 ID" msgid "Standard Flow" msgstr "标准流量" +# AI Translated msgid "Please find the best line on your plate" -msgstr "请在您的打印板上找到最佳线条" +msgstr "请在热床上找到最佳线条" msgid "Please find the corner with the perfect degree of extrusion" msgstr "请找到具有完美挤出度的转角" @@ -21963,20 +23097,24 @@ msgstr "请找到具有完美挤出度的转角" msgid "Input Value" msgstr "输入值" +# AI Translated msgid "Save to Filament Preset" -msgstr "保存到耗材预设" +msgstr "保存到耗材丝预设" msgid "Record Factor" msgstr "记录系数" +# AI Translated msgid "We found the best flow ratio for you" -msgstr "我们为您找到了最佳流量比" +msgstr "我们为您找到了最佳流量比例" +# AI Translated msgid "Flow Ratio" -msgstr "流量比" +msgstr "流量比例" +# AI Translated msgid "Please input a valid value (0.0 < flow ratio < 2.0)" -msgstr "请输入一个有效值（0.0 < 流量比 < 2.0）" +msgstr "请输入一个有效值（0.0 < 流量比例 < 2.0）" msgid "Please enter the name of the preset you want to save." msgstr "请输入要保存的预设的名称。" @@ -21987,18 +23125,21 @@ msgstr "校准 1" msgid "Calibration2" msgstr "校准 2" +# AI Translated msgid "Please find the best object on your plate" -msgstr "请在打印板上找到最佳对象" +msgstr "请在热床上找到最佳对象" +# AI Translated msgid "Fill in the value above the block with smoothest top surface" -msgstr "填入最光滑的顶面的数值" +msgstr "填入顶面最光滑的方块上方标注的数值" msgid "Skip Calibration2" msgstr "略过校准 2" +# AI Translated #, c-format, boost-format msgid "flow ratio : %s " -msgstr "流量比：%s " +msgstr "流量比例：%s " msgid "Please choose a block with smoothest top surface." msgstr "请选择顶部表面最光滑的块。" @@ -22012,8 +23153,9 @@ msgstr "校准类型" msgid "Complete Calibration" msgstr "完整校准" +# AI Translated msgid "Fine Calibration based on flow ratio" -msgstr "基于流量比的精细校准" +msgstr "基于流量比例的精细校准" msgid "Title" msgstr "标题" @@ -22041,8 +23183,9 @@ msgstr "尚未设置打印机右喷嘴信息。请在进行校准之前对其进 msgid "Printer left nozzle information has not been set. Please configure it before proceeding with the calibration." msgstr "尚未设置打印机左喷嘴信息。请在进行校准之前对其进行配置。" +# AI Translated msgid "AMS and nozzle information are synced" -msgstr "AMS 和喷嘴信息同步" +msgstr "AMS 和喷嘴信息已同步" msgid "Nozzle Flow" msgstr "喷嘴流量" @@ -22050,17 +23193,19 @@ msgstr "喷嘴流量" msgid "Filament position" msgstr "耗材丝位置" +# AI Translated msgid "Filament For Calibration" -msgstr "校准用耗材" +msgstr "校准用耗材丝" +# AI Translated msgid "" "Tips for calibration material:\n" "- Materials that can share same hot bed temperature\n" "- Different filament brand and family (Brand = Bambu, Family = Basic, Matte)" msgstr "" -"关于耗材校准的提示：\n" -"- 可以共用热床温度的耗材\n" -"- 不同品牌和系列的耗材（品牌 = Bambu, 系列 = Basic、Matte）" +"关于耗材丝校准的提示：\n" +"- 可以共用热床温度的耗材丝\n" +"- 不同品牌和系列的耗材丝（品牌 = Bambu, 系列 = Basic、Matte）" msgid "Pattern" msgstr "图案" @@ -22072,11 +23217,13 @@ msgstr "方法" msgid "%s is not compatible with %s" msgstr "%s 与 %s 不兼容" +# AI Translated msgid "TPU is not supported for Flow Dynamics Auto-Calibration." -msgstr "不支持TPU进行流量动态自动校准。" +msgstr "不支持TPU进行动态流量自动校准。" +# AI Translated msgid "Selected nozzle temperatures are incompatible. For multi-material printing, each filament's nozzle temperature must be within the recommended nozzle temperature range of the other filaments. Otherwise, nozzle clogging or printer damage may occur." -msgstr "所选的喷嘴温度不兼容。在多材料打印中，每种耗材的喷嘴温度都必须落在其他耗材的推荐喷嘴温度范围内。否则可能会发生喷嘴堵塞或打印机损坏。" +msgstr "所选的喷嘴温度不兼容。在多材料打印中，每种耗材丝的喷嘴温度都必须落在其他耗材丝的推荐喷嘴温度范围内。否则可能会发生喷嘴堵塞或打印机损坏。" msgid "Sync AMS and nozzle information" msgstr "同步 AMS 和喷嘴信息" @@ -22107,8 +23254,9 @@ msgctxt "Increment" msgid "Step" msgstr "步长" +# AI Translated msgid "Are you sure you want to cancel this print?" -msgstr "你确定要取消这次打印吗？" +msgstr "您确定要取消这次打印吗？" msgid "Flow Dynamics Calibration Result" msgstr "动态流量校准结果" @@ -22122,8 +23270,9 @@ msgstr "无历史结果" msgid "Success to get history result" msgstr "成功获取历史结果" +# AI Translated msgid "Refreshing the previous Flow Dynamics Calibration records" -msgstr "刷新历史流量动态校准记录" +msgstr "正在刷新历史动态流量校准记录" #, c-format, boost-format msgid "Note: The hotend number on the %s is tied to the holder. When the hotend is moved to a new holder, its number will update automatically." @@ -22141,15 +23290,17 @@ msgstr[0] "该机型的每个喷嘴最多只能保存 %d 个历史结果。" msgid "Edit Flow Dynamics Calibration" msgstr "编辑动态流量校准" +# AI Translated #, c-format, boost-format msgid "Within the same extruder, the name '%s' must be unique when the filament type, nozzle diameter, and nozzle flow are identical. Please choose a different name." -msgstr "在同一台挤出机中，当耗材类型、喷嘴直径和喷嘴流量相同时，名称“%s”必须是唯一的。请选择不同的名称。" +msgstr "在同一台挤出机中，当耗材丝类型、喷嘴直径和喷嘴流量相同时，名称“%s”必须是唯一的。请选择不同的名称。" msgid "New Flow Dynamic Calibration" msgstr "新建动态流量校准" +# AI Translated msgid "The filament must be selected." -msgstr "请选择耗材" +msgstr "请选择耗材丝。" msgid "The extruder must be selected." msgstr "必须选择挤出机。" @@ -22181,13 +23332,14 @@ msgstr "完成" msgid "Multiple resolved IP addresses" msgstr "解析出了多个IP地址" +# AI Translated #, boost-format msgid "" "There are several IP addresses resolving to hostname %1%.\n" "Please select one that should be used." msgstr "" -"主机名 %1% 指向了多个IP地址\n" -"请在其中选择一个正在使用的地址。" +"主机名 %1% 指向了多个IP地址。\n" +"请选择要使用的地址。" # AI Translated msgid "Auto-scale for nozzle" @@ -22223,14 +23375,17 @@ msgstr "划线模式" msgid "PA Pattern" msgstr "V形模式" +# AI Translated msgid "Start PA: " -msgstr "起始值" +msgstr "起始PA值： " +# AI Translated msgid "End PA: " -msgstr "结束值" +msgstr "结束PA值： " +# AI Translated msgid "PA step: " -msgstr "步进长度" +msgstr "PA步长： " msgid "Accelerations: " msgstr "加速度： " @@ -22241,12 +23396,15 @@ msgstr "速度： " msgid "Print numbers" msgstr "打印数字" +# AI Translated msgid "Comma-separated list of printing accelerations" -msgstr "以逗号分隔的 加速度 列表" +msgstr "以逗号分隔的加速度列表" +# AI Translated msgid "Comma-separated list of printing speeds" -msgstr "以逗号分隔的 速度 列表" +msgstr "以逗号分隔的速度列表" +# AI Translated msgid "" "Please input valid values:\n" "Start PA: >= 0.0\n" @@ -22254,14 +23412,17 @@ msgid "" "PA step: >= 0.001" msgstr "" "请输入有效值：\n" -"起始PA值: >= 0.0\n" -"结束PA值: > 起始PA值\n" -"PA值步进长度：>= 0.001）" +"起始PA值：>= 0.0\n" +"结束PA值：> 起始PA值\n" +"PA步长：>= 0.001" +# AI Translated msgid "" "Acceleration values must be greater than speed values.\n" "Please verify the inputs." -msgstr "加速度值必须大于速度值，请验证输入。" +msgstr "" +"加速度值必须大于速度值。\n" +"请检查输入。" # AI Translated msgid "Not enabled yet on belt printers — use the PA Tower method instead." @@ -22304,14 +23465,17 @@ msgctxt "Test model" msgid "Overhang" msgstr "悬垂" +# AI Translated msgid "Start temp: " -msgstr "起始温度: " +msgstr "起始温度： " +# AI Translated msgid "End temp: " -msgstr "结束温度" +msgstr "结束温度： " +# AI Translated msgid "Temp step: " -msgstr "温度步长" +msgstr "温度步长： " # AI Translated #. TRN %s is the temperature unit @@ -22319,6 +23483,7 @@ msgstr "温度步长" msgid "Supported range: 170%s - 500%s" msgstr "支持范围：170%s - 500%s" +# AI Translated msgid "" "Please input valid values:\n" "Start temp: <= 500\n" @@ -22327,15 +23492,18 @@ msgid "" msgstr "" "请输入有效值：\n" "起始温度：<= 500\n" -"结束温度: >= 155\n" -"开始温度 >= 结束温度 + 5" +"结束温度：>= 155\n" +"起始温度 >= 结束温度 + 5" +# AI Translated msgid "Start volumetric speed: " -msgstr "起始流量" +msgstr "起始体积流量： " +# AI Translated msgid "End volumetric speed: " -msgstr "结束流量" +msgstr "结束体积流量： " +# AI Translated msgid "" "Please input valid values:\n" "start > 0\n" @@ -22345,13 +23513,15 @@ msgstr "" "请输入有效值：\n" "起始 > 0\n" "步进长度 >= 0\n" -"结束 > 起始 + 步进长度）" +"结束 > 起始 + 步进长度" +# AI Translated msgid "Start speed: " -msgstr "起始速度" +msgstr "起始速度： " +# AI Translated msgid "End speed: " -msgstr "结束速度" +msgstr "结束速度： " # AI Translated msgid "Auto-adjust to max volumetric speed" @@ -22361,6 +23531,7 @@ msgstr "自动调整以适应最大体积流量" msgid "If the end speed would exceed the filament's maximum volumetric speed, automatically lower the layer height (keeping standard values and staying within the machine's limits) to reach it. If even the minimum layer height is not enough, lower the end speed instead." msgstr "如果结束速度会超过耗材丝的最大体积流量，则自动降低层高（保持标准数值并处于机器限制范围内）以达到该速度。如果连最小层高也不够，则改为降低结束速度。" +# AI Translated msgid "" "Please input valid values:\n" "start > 10\n" @@ -22370,7 +23541,7 @@ msgstr "" "请输入有效值：\n" "开始 > 10\n" "步进长度 >= 0\n" -"结束 > 开始 + 步进长度）" +"结束 > 开始 + 步进长度" # AI Translated #, c-format, boost-format @@ -22381,7 +23552,7 @@ msgid "" "%s" msgstr "" "结束速度（%.0f mm/s）超过了耗材丝的最大体积流量（%.1f mm³/s），在当前线宽和层高下，外墙被限制在约 %.0f mm/s。\n" -" 超过该值的速度会被钳制，因此塔的上部区块不会以请求的速度打印。\n" +" 超过该值的速度会被限制，因此塔的上部区块无法达到设定的速度。\n" "\n" "%s" @@ -22423,11 +23594,13 @@ msgstr "启用“自动调整”可自动解决该问题，或者仍要继续？ msgid "Enable \"Auto-scale for nozzle\" and \"Auto-adjust\" to fix this automatically, or continue anyway?" msgstr "启用“根据喷嘴自动缩放”和“自动调整”可自动解决该问题，或者仍要继续？" +# AI Translated msgid "Start retraction length: " -msgstr "起始回抽长度" +msgstr "起始回抽长度： " +# AI Translated msgid "End retraction length: " -msgstr "结束回抽长度" +msgstr "结束回抽长度： " msgid "Ringing Tower" msgstr "振纹塔" @@ -22455,8 +23628,9 @@ msgstr "" "RepRap 固件版本 => 3.4.0\n" "请查阅您的固件文档了解支持的整形器类型。" +# AI Translated msgid "Frequency (Start / End): " -msgstr "频率（开始/结束）：" +msgstr "频率（开始/结束）： " # AI Translated msgid "X Start / End: " @@ -22498,8 +23672,9 @@ msgstr "输入整形的阻尼测试" msgid "Check firmware compatibility." msgstr "检查固件兼容性。" +# AI Translated msgid "Frequency: " -msgstr "频率：" +msgstr "频率： " # AI Translated msgid "Frequency X / Y: " @@ -22528,11 +23703,13 @@ msgstr "请输入有效的阻尼系数 (0 <= 阻尼开始 < 阻尼结束 <= 1)" msgid "SCV-V2" msgstr "SCV-V2" +# AI Translated msgid "Start: " -msgstr "开始：" +msgstr "开始： " +# AI Translated msgid "End: " -msgstr "结尾：" +msgstr "结束： " msgid "Cornering settings" msgstr "转角设置" @@ -22540,19 +23717,21 @@ msgstr "转角设置" msgid "Note: Lower values = sharper corners but slower speeds." msgstr "注意：值越低 = 转角越尖锐，但速度越慢。" +# AI Translated msgid "" "Marlin 2 Junction Deviation detected:\n" "To test Classic Jerk, set 'Maximum Junction Deviation' in Motion ability to 0." msgstr "" -"Marlin 2 检测到连接偏差：\n" -"要测试经典加加速度，请将运动能力中的“最大连接偏差”设置为 0。" +"检测到 Marlin 2 结点偏差：\n" +"要测试经典抖动（Classic Jerk），请将“移动能力”中的“最大结点偏差”设置为 0。" +# AI Translated msgid "" "Marlin 2 Classic Jerk detected:\n" "To test Junction Deviation, set 'Maximum Junction Deviation' in Motion ability to a value > 0." msgstr "" -"Marlin 2 Classic Jerk 检测到：\n" -"要测试连接偏差，请将运动能力中的“最大连接偏差”设置为 > 0 的值。" +"检测到 Marlin 2 经典抖动（Classic Jerk）：\n" +"要测试结点偏差，请将“移动能力”中的“最大结点偏差”设置为大于 0 的值。" msgid "" "RepRap detected: Jerk in mm/s.\n" @@ -22615,9 +23794,10 @@ msgstr "上传到存储器" msgid "Switch to Device tab after upload." msgstr "上传后跳转到设备页。" +# AI Translated #, c-format, boost-format msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?" -msgstr "上传的文件名不是 \"%s\" 结尾，是否继续？" +msgstr "上传的文件名不以 \"%s\" 结尾，是否继续？" msgid "Upload" msgstr "上传" @@ -22667,8 +23847,9 @@ msgstr "打印主机上传队列" msgid "ID" msgstr "ID" +# AI Translated msgid "Progress" -msgstr "进程" +msgstr "进度" msgid "Host" msgstr "主机" @@ -22695,11 +23876,13 @@ msgstr "正在上传" msgid "Canceling" msgstr "正在取消" +# AI Translated msgid "Error uploading to print host" -msgstr "上传到打印机时错误" +msgstr "上传到打印主机时出错" +# AI Translated msgid "The selected bed type does not match the file. Please confirm before starting the print." -msgstr "所选床类型与文件不匹配。开始打印前请确认。" +msgstr "所选热床类型与文件不匹配。开始打印前请确认。" msgid "Heated Bed Leveling" msgstr "热床调平" @@ -22717,8 +23900,9 @@ msgstr "打印机：%s" msgid "Calibrate before printing" msgstr "打印前校准" +# AI Translated msgid "Filament Mapping:" -msgstr "耗材映射：" +msgstr "耗材丝映射：" # AI Translated #. TRN External spool slot, followed by its filament type @@ -22726,11 +23910,13 @@ msgstr "耗材映射：" msgid "Ext - %s" msgstr "外置 - %s" +# AI Translated msgid "Unable to perform boolean operation on selected parts" -msgstr "无法对所选部件执行布尔运算" +msgstr "无法对所选零件执行布尔运算" +# AI Translated msgid "Mesh Boolean" -msgstr "布尔运算" +msgstr "网格布尔运算" msgid "Union" msgstr "并集" @@ -22770,29 +23956,36 @@ msgstr "删除输入" msgid "Network Test" msgstr "网络测试" +# AI Translated msgid "Start Test Multi-Thread" -msgstr "多线程测试开始" +msgstr "开始多线程测试" +# AI Translated msgid "Start Test Single-Thread" -msgstr "单线程测试开始" +msgstr "开始单线程测试" +# AI Translated msgid "Export Log" -msgstr "输出日志" +msgstr "导出日志" +# AI Translated msgid "OrcaSlicer Version:" -msgstr "逆戟鲸切片器版本：" +msgstr "OrcaSlicer 版本：" msgid "System Version:" msgstr "系统版本：" +# AI Translated msgid "DNS Server:" -msgstr "DNS服务：" +msgstr "DNS 服务器：" +# AI Translated msgid "Test OrcaSlicer (GitHub)" -msgstr "测试OrcaSlicer（逆戟鲸）项目的 GitHub 网站" +msgstr "测试 OrcaSlicer（GitHub）" +# AI Translated msgid "Test OrcaSlicer (GitHub):" -msgstr "测试OrcaSlicer（逆戟鲸）项目的 GitHub 网站" +msgstr "测试 OrcaSlicer（GitHub）：" msgid "Test bing.com" msgstr "测试 Bing.com" @@ -22824,26 +24017,32 @@ msgstr "测试 %s 失败" msgid "test %s ok" msgstr "测试 %s 成功" +# AI Translated msgid "Select filament preset" -msgstr "选择耗材预设" +msgstr "选择耗材丝预设" +# AI Translated msgid "Create Filament" -msgstr "创建耗材" +msgstr "创建耗材丝" +# AI Translated msgid "Create Based on Current Filament" -msgstr "基于当前耗材创建" +msgstr "基于当前耗材丝创建" +# AI Translated msgid "Copy Current Filament Preset " -msgstr "复制当前耗材预设" +msgstr "复制当前耗材丝预设 " msgid "Basic Information" msgstr "基本信息" +# AI Translated msgid "Add Filament Preset under this filament" -msgstr "添加该耗材的耗材预设" +msgstr "在此耗材丝下添加耗材丝预设" +# AI Translated msgid "We could create the filament presets for your following printer:" -msgstr "我们可以为您的以下打印机创建耗材预设：" +msgstr "我们可以为您的以下打印机创建耗材丝预设：" msgid "Select Vendor" msgstr "选择供应商" @@ -22857,8 +24056,9 @@ msgstr "未找到我想要的供应商" msgid "Select Type" msgstr "选择类型" +# AI Translated msgid "Select Filament Preset" -msgstr "选择耗材预设" +msgstr "选择耗材丝预设" msgid "Serial" msgstr "系列" @@ -22866,8 +24066,9 @@ msgstr "系列" msgid "e.g. Basic, Matte, Silk, Marble" msgstr "例如：Basic, Matte, Silk, Marble" +# AI Translated msgid "Filament Preset" -msgstr "耗材预设" +msgstr "耗材丝预设" msgid "Vendor is not selected; please reselect vendor." msgstr "未选择供应商，请重新选择供应商。" @@ -22875,18 +24076,21 @@ msgstr "未选择供应商，请重新选择供应商。" msgid "Custom vendor missing; please input custom vendor." msgstr "未输入自定义供应商，请输入自定义供应商。" +# AI Translated msgid "\"Bambu\" or \"Generic\" cannot be used as a Vendor for custom filaments." -msgstr "“Bambu”或“Generic”名称不能用于自定义耗材供应商" +msgstr "“Bambu”或“Generic”名称不能用于自定义耗材丝供应商。" +# AI Translated msgid "Filament type is not selected, please reselect type." -msgstr "未选择耗材类型，请重新选择。" +msgstr "未选择耗材丝类型，请重新选择。" +# AI Translated msgid "Filament serial missing; please input serial." -msgstr "未输入耗材系列，请输入耗材系列。" +msgstr "未输入耗材丝系列，请输入耗材丝系列。" # AI Translated msgid "There may be disallowed characters in the vendor or serial input of the filament. Please delete and re-enter." -msgstr "耗材的供应商或系列输入中可能包含不允许的字符。请删除后重新输入。" +msgstr "耗材丝的供应商或系列输入中可能包含不允许的字符。请删除后重新输入。" msgid "All inputs in the custom vendor or serial are spaces. Please re-enter." msgstr "检测到自定义供应商或系列中的所有输入都是空格。请重新输入。" @@ -22897,30 +24101,33 @@ msgstr "自定义供应商不能是数字。请重新输入。" msgid "You have not selected a printer or preset yet. Please select at least one." msgstr "您还没有选择打印机或预设。请至少选择一个。" +# AI Translated #, c-format, boost-format msgid "" "The Filament name %s you created already exists.\n" "If you continue, the preset created will be displayed with its full name. Do you want to continue?" msgstr "" -"您创建的耗材名称 %s 有重名。\n" +"您创建的耗材丝名称 %s 有重名。\n" "如果您继续创建，您创建的预设将以全名显示。您想继续吗？" msgid "Some existing presets have failed to be created, as follows:\n" msgstr "以下一些现有预设未能成功创建：\n" +# AI Translated msgid "" "\n" "Do you want to rewrite it?" msgstr "" "\n" -"你想重写预设吗" +"是否覆盖？" +# AI Translated msgid "" "We would rename the presets as \"Vendor Type Serial @printer you selected\".\n" "To add preset for more printers, please go to printer selection" msgstr "" -"我们将会把预设重命名为“供应商类型名 @ 您选择的打印机”\n" -"如果您希望为更多打印机添加预设，请前往打印机选择页面" +"我们会将预设重命名为“供应商 类型 系列 @您选择的打印机”。\n" +"如需为更多打印机添加预设，请前往打印机选择页面" msgid "Create Printer/Nozzle" msgstr "创建打印机/喷嘴" @@ -22940,8 +24147,9 @@ msgstr "基于当前打印机创建" msgid "Import Preset" msgstr "导入预设" +# AI Translated msgid "Create Type" -msgstr "创建类型" +msgstr "创建方式" msgid "The model was not found; please reselect vendor." msgstr "该型号未找到，请重新选择供应商。" @@ -22955,8 +24163,9 @@ msgstr "选择型号" msgid "Input Custom Model" msgstr "输入自定义型号" +# AI Translated msgid "Can't find my printer model" -msgstr "未找到我的打印机模型" +msgstr "未找到我的打印机型号" msgid "Input Custom Nozzle Diameter" msgstr "输入自定义喷嘴直径" @@ -22964,8 +24173,9 @@ msgstr "输入自定义喷嘴直径" msgid "Can't find my nozzle diameter" msgstr "未找到我的喷嘴直径" +# AI Translated msgid "Printable Space" -msgstr "可打印形状" +msgstr "可打印区域" msgid "Hot Bed STL" msgstr "热床STL模型" @@ -22998,8 +24208,9 @@ msgstr "打印机预设未找到，请重新选择。" msgid "Printer Preset" msgstr "打印机预设" +# AI Translated msgid "Filament Preset Template" -msgstr "耗材预设模板" +msgstr "耗材丝预设模板" msgid "Process Preset Template" msgstr "工艺预设模板" @@ -23019,18 +24230,20 @@ msgid "" "\tCancel: Do not create a preset; return to the creation interface." msgstr "" "已有一个预设与您创建的打印机预设同名，您想要覆盖它吗？\n" -"\t是：覆盖同名的打印机预设，具有相同预设名称的耗材和工艺预设将被重新创建，\n" -"没有相同预设名称的耗材和工艺预设将被保留。\n" +"\t是：覆盖同名的打印机预设，具有相同预设名称的耗材丝和工艺预设将被重新创建，\n" +"没有相同预设名称的耗材丝和工艺预设将被保留。\n" "\t取消：不创建预设，返回到创建界面。" +# AI Translated msgid "You need to select at least one filament preset." -msgstr "您需要至少选择一个材料预设。" +msgstr "您需要至少选择一个耗材丝预设。" msgid "You need to select at least one process preset." msgstr "您需要至少选择一个工艺预设。" +# AI Translated msgid "Create filament presets failed. As follows:\n" -msgstr "创建耗材预设失败。如下：\n" +msgstr "创建耗材丝预设失败。如下：\n" msgid "Create process presets failed. As follows:\n" msgstr "创建工艺预设失败。如下：\n" @@ -23050,8 +24263,9 @@ msgstr "检测到自定义供应商或型号中可能有转义字符。请删除 msgid "All inputs in the custom printer vendor or model are spaces. Please re-enter." msgstr "检测到自定义供应商或型号的所有输入都是空格。请重新输入。" +# AI Translated msgid "Please check bed printable shape and origin input." -msgstr "请检查 可打印区域 和 原点 的输入。" +msgstr "请检查“可打印区域”和“原点”的输入。" msgid "You have not yet selected the printer to replace the nozzle for; please choose a printer." msgstr "您尚未选择要更换喷嘴的打印机，请进行选择。" @@ -23059,11 +24273,15 @@ msgstr "您尚未选择要更换喷嘴的打印机，请进行选择。" msgid "The entered nozzle diameter is invalid, please re-enter:\n" msgstr "输入的喷嘴直径无效，请重新输入：\n" +# AI Translated msgid "" "The system preset does not allow creation. \n" "Please re-enter the printer model or nozzle diameter." -msgstr "不允许创建系统级预设。请重新输入打印机型号或喷嘴直径。" +msgstr "" +"不允许创建系统级预设。\n" +"请重新输入打印机型号或喷嘴直径。" +# AI Translated msgid "" "\n" "\n" @@ -23071,7 +24289,7 @@ msgid "" msgstr "" "\n" "\n" -"此打印机可用的喷嘴配置文件：" +"此打印机可用的喷嘴预设：" msgid "" "\n" @@ -23085,8 +24303,9 @@ msgstr "" msgid "Printer Created Successfully" msgstr "创建打印机成功" +# AI Translated msgid "Filament Created Successfully" -msgstr "创建耗材成功" +msgstr "创建耗材丝成功" msgid "Printer Created" msgstr "打印机已创建" @@ -23094,16 +24313,19 @@ msgstr "打印机已创建" msgid "Please go to printer settings to edit your presets" msgstr "请前往 打印机设置 编辑您的预设" +# AI Translated msgid "Filament Created" -msgstr "耗材已创建" +msgstr "耗材丝已创建" +# AI Translated msgid "" "Please go to filament settings to edit your presets if you need to.\n" "Please note that nozzle temperature, hot bed temperature, and maximum volumetric speed each have a significant impact on printing quality. Please set them carefully." msgstr "" -"如果需要，请转到耗材设置以编辑您的预设。\n" +"如果需要，请转到耗材丝设置以编辑您的预设。\n" "请注意：喷嘴温度、热床温度和最大体积流量对打印质量有重大影响，请谨慎设置。" +# AI Translated msgid "" "\n" "\n" @@ -23112,7 +24334,7 @@ msgid "" msgstr "" "\n" "\n" -"Orca 检测到您未启用用户预设同步，这可能导致您在设备页面上无法正确设置耗材。\n" +"Orca 检测到您未启用用户预设同步，这可能导致您在设备页面上无法正确设置耗材丝。\n" "点击 “同步用户预设” 以启用同步功能。" msgid "Printer Setting" @@ -23121,14 +24343,16 @@ msgstr "打印机设置" msgid "Printer config bundle(.orca_printer)" msgstr "打印机预设包(.orca_printer)" +# AI Translated msgid "Filament bundle(.orca_filament)" -msgstr "耗材预设包(.orca_filament)" +msgstr "耗材丝预设包(.orca_filament)" msgid "Printer presets(.zip)" msgstr "打印机预设(.zip)" +# AI Translated msgid "Filament presets(.zip)" -msgstr "耗材预设(.zip)" +msgstr "耗材丝预设(.zip)" msgid "Process presets(.zip)" msgstr "工艺预设(.zip)" @@ -23169,66 +24393,83 @@ msgstr "" "可能已被另一个程序打开。\n" "请关闭它并重试。" +# AI Translated msgid "" "Printer and all the filament and process presets that belongs to the printer.\n" "Can be shared with others." msgstr "" -"打印机和属于打印机的所有的耗材和工艺预设。\n" +"打印机和属于打印机的所有的耗材丝和工艺预设。\n" "可与他人分享。" # AI Translated msgid "Include custom bed texture and model" msgstr "包含自定义热床纹理和模型" +# AI Translated msgid "" "User's filament preset set.\n" "Can be shared with others." msgstr "" -"用户的耗材预设集。\n" +"用户的耗材丝预设集。\n" "可与他人分享。" +# AI Translated msgid "Only display printers with changes to printer, filament, and process presets are displayed." -msgstr "仅显示对打印机、耗材和工艺预设有改动的打印机名称。" +msgstr "仅显示对打印机、耗材丝和工艺预设有改动的打印机名称。" +# AI Translated msgid "Only display the filament names with changes to filament presets." -msgstr "仅显示对耗材预设有改动的耗材名称。" +msgstr "仅显示对耗材丝预设有改动的耗材丝名称。" msgid "Only printer names with user printer presets will be displayed, and each preset you choose will be exported as a ZIP archive." msgstr "只显示带有用户打印机预设的打印机名称，并且您选择的每个预设都将导出为一个 ZIP 文件。" +# AI Translated msgid "" "Only the filament names with user filament presets will be displayed, \n" "and all user filament presets in each filament name you select will be exported as a ZIP archive." -msgstr "只显示带有用户耗材预设的耗材名称，您选择的每个耗材名称中的所有用户耗材预设都将导出为一个 ZIP 文件。" +msgstr "" +"只显示带有用户耗材丝预设的耗材丝名称，\n" +"您选择的每个耗材丝名称下的所有用户耗材丝预设都将导出为一个 ZIP 文件。" +# AI Translated msgid "" "Only printer names with changed process presets will be displayed, \n" "and all user process presets in each printer name you select will be exported as a ZIP archive." -msgstr "只显示带有更改的工艺预设的打印机名称，您选择的每个打印机名称中的所有用户工艺预设都将导出为一个 ZIP 文件。" +msgstr "" +"只显示工艺预设有改动的打印机名称，\n" +"您选择的每个打印机名称下的所有用户工艺预设都将导出为一个 ZIP 文件。" +# AI Translated msgid "Please select at least one printer or filament." -msgstr "请至少选择一种打印机或耗材。" +msgstr "请至少选择一种打印机或耗材丝。" +# AI Translated msgid "Please select a preset type you want to export" -msgstr "请选择想导出的类型" +msgstr "请选择要导出的预设类型" msgid "Failed to create temporary folder, please try Export Configs again." msgstr "创建临时文件夹失败，请尝试重新导出配置文件。" +# AI Translated msgid "Edit Filament" -msgstr "编辑耗材" +msgstr "编辑耗材丝" +# AI Translated msgid "Filament presets under this filament" -msgstr "此耗材下的所有耗材预设" +msgstr "此耗材丝下的所有耗材丝预设" +# AI Translated msgid "Note: If the only preset under this filament is deleted, the filament will be deleted after exiting the dialog." -msgstr "注意：如果在该耗材下仅有的预设被删除，在关闭对话框后，该耗材将被删除。" +msgstr "注意：如果在该耗材丝下仅有的预设被删除，在关闭对话框后，该耗材丝将被删除。" +# AI Translated msgid "Presets inherited by other presets cannot be deleted" -msgstr "附属于其他预设的预设不能被删除。" +msgstr "被其他预设继承的预设不能删除" +# AI Translated msgid "Are you sure to delete the selected preset?" -msgstr "你确定要删除所选预设？" +msgstr "您确定要删除所选预设吗？" msgid "Delete preset" msgstr "删除预设" @@ -23236,15 +24477,17 @@ msgstr "删除预设" msgid "+ Add Preset" msgstr "+ 添加预设" +# AI Translated msgid "" "All the filament presets belong to this filament would be deleted.\n" "If you are using this filament on your printer, please reset the filament information for that slot." msgstr "" -"删除此耗材时，其附属的耗材预设也会一并删除。\n" -"如果该耗材正在您的打印机上使用，请重新设置该槽位的耗材信息。" +"删除此耗材丝时，其附属的耗材丝预设也会一并删除。\n" +"如果该耗材丝正在您的打印机上使用，请重新设置该槽位的耗材丝信息。" +# AI Translated msgid "Delete filament" -msgstr "删除耗材" +msgstr "删除耗材丝" msgid "Add Preset" msgstr "添加预设" @@ -23252,14 +24495,17 @@ msgstr "添加预设" msgid "Add preset for new printer" msgstr "为新打印机添加预设" +# AI Translated msgid "Copy preset from filament" -msgstr "从材料中复制预设" +msgstr "从耗材丝复制预设" +# AI Translated msgid "The filament choice not find filament preset, please reselect it" -msgstr "您选择的耗材未找到耗材预设，请重新选择。" +msgstr "您选择的耗材丝未找到耗材丝预设，请重新选择。" +# AI Translated msgid "[Delete Required]" -msgstr "[删除请求]" +msgstr "[需要删除]" msgid "Edit Preset" msgstr "编辑预设" @@ -23303,10 +24549,11 @@ msgstr "起始、结束或者步长输入值无效。" msgid "The number of printer extruders and the printer selected for calibration does not match." msgstr "挤出机数量与所选择进行校准的打印机不匹配。" +# AI Translated #. TRN %s is "left" or "right". #, c-format, boost-format msgid "The nozzle diameter of %s extruder is 0.2mm which does not support automatic Flow Dynamics calibration." -msgstr "%s 挤出机的喷嘴直径为 0.2 mm，不支持自动流体动力学校准。" +msgstr "%s 挤出机的喷嘴直径为 0.2 mm，不支持自动动态流量校准。" #. TRN %s is "left" or "right". #, c-format, boost-format @@ -23324,10 +24571,11 @@ msgstr "" "喷嘴直径与实际打印机喷嘴直径不匹配。\n" "请单击上面的同步按钮并重新启动校准。" +# AI Translated #. TRN %s is "left" or "right". #, c-format, boost-format msgid "Printer %s nozzle information has not been set. Please configure it before proceeding with the calibration." -msgstr "%s 打印机的喷嘴信息尚未设置。请在进行校准之前对其进行配置。" +msgstr "尚未设置打印机%s喷嘴信息。请在进行校准之前对其进行配置。" #. TRN %s is "left" or "right". #, c-format, boost-format @@ -23338,8 +24586,9 @@ msgstr "" "%s 挤出机当前选择的喷嘴类型与实际打印机喷嘴类型不匹配。\n" "请单击上面的同步按钮并重新启动校准。" +# AI Translated msgid "Unable to calibrate: maybe because the set calibration value range is too large, or the step is too small" -msgstr "无法校准：可能是校准值范围过大，或者是补偿过小" +msgstr "无法校准：可能是校准值范围过大，或者是步长过小" msgid "Physical Printer" msgstr "物理打印机" @@ -23377,18 +24626,21 @@ msgstr "API 密钥已创建。" msgid "Are you sure to log out?" msgstr "您确定要登出吗？" +# AI Translated msgid "View print host webui in Device tab" -msgstr "在 设备 标签页中查看打印机主机的网页界面" +msgstr "在“设备”标签页中查看打印主机的网页界面" msgid "Replace the BambuLab's device tab with print host webui" msgstr "使用打印机主机的网页界面替换 BambuLab 设备页面" +# AI Translated #, c-format, boost-format msgid "On this system, %s uses HTTPS certificates from the system Certificate Store or Keychain." -msgstr "在此系统上，%s 使用来自系统的证书存储或密钥链的HTTPS证书。" +msgstr "在此系统上，%s 使用来自系统的证书存储或钥匙串的HTTPS证书。" +# AI Translated msgid "To use a custom CA file, please import your CA file into Certificate Store / Keychain." -msgstr "要使用自定义 CA 证书，请将您的 CA 证书导入到 证书存储/密钥链 中。" +msgstr "要使用自定义 CA 证书，请将您的 CA 证书导入到“证书存储/钥匙串”中。" msgid "Login/Test" msgstr "登录/测试" @@ -23445,7 +24697,7 @@ msgstr "打印机" # AI Translated msgid "Processes" -msgstr "进程" +msgstr "工艺" # AI Translated msgid "Show/Hide system information" @@ -23638,9 +24890,10 @@ msgstr "会话检查出错" msgid "Error during file upload" msgstr "文件上传过程中出错" +# AI Translated #, c-format, boost-format msgid "Mismatched type of print host: %s" -msgstr "%s 打印机的主机类型不匹配" +msgstr "打印主机类型不匹配：%s" msgid "Connection to AstroBox is working correctly." msgstr "与 AstroBox 的连接正常。" @@ -23779,8 +25032,9 @@ msgstr "上传失败。未能在 %1% 找到合适的存储器。" msgid "Connection to Prusa Connect is working correctly." msgstr "与 Prusa Connect 的连接正常。" +# AI Translated msgid "Could not connect to Prusa Connect" -msgstr "无法连接到 Prusa connect" +msgstr "无法连接到 Prusa Connect" msgid "Connection to Repetier is working correctly." msgstr "与 Repetier 的连接正常。" @@ -23799,6 +25053,7 @@ msgstr "" "HTTP状态：%1%\n" "消息：\"%2%\"" +# AI Translated #, boost-format msgid "" "Parsing of host response failed.\n" @@ -23806,16 +25061,19 @@ msgid "" "Error: \"%2%\"" msgstr "" "无法解析主机响应。\n" -"错误消息：\"%1%\" 错误：\"%2%\"" +"消息正文：\"%1%\"\n" +"错误：\"%2%\"" +# AI Translated #, boost-format msgid "" "Enumeration of host printers failed.\n" "Message body: \"%1%\"\n" "Error: \"%2%\"" msgstr "" -"无法枚举打印机主机。\n" -"错误消息：\"%1%\" 错误：\"%2%\"" +"无法枚举主机上的打印机。\n" +"消息正文：\"%1%\"\n" +"错误：\"%2%\"" # AI Translated msgid "Connection to ESP3D is working correctly." @@ -23861,11 +25119,13 @@ msgstr "动态流量校准" msgid "Send Options" msgstr "发送选项" +# AI Translated msgid "Send to" -msgstr "发送至" +msgstr "同时发送至" +# AI Translated msgid "printers at the same time. (It depends on how many devices can undergo heating at the same time.)" -msgstr "打印机在同一时间。（这取决于有多少设备可以接受同时加热。）" +msgstr "台打印机。（取决于可以同时加热的设备数量。）" msgid "Wait" msgstr "等待" @@ -23973,17 +25233,19 @@ msgstr "移除" # AI Translated msgid "Enable smart filament assign: Assign one filament to multiple nozzles to maximize savings" -msgstr "启用智能耗材分配：将一种耗材分配给多个喷嘴以最大化节省" +msgstr "启用智能耗材丝分配：将一种耗材丝分配给多个喷嘴以最大化节省" # AI Translated msgid "File Saving" msgstr "文件保存" +# AI Translated msgid "No further pop-up will appear. You can reopen it in 'Preferences'" -msgstr "将不再弹出任何窗口。您可以在 “首选项” 中重新打开它" +msgstr "将不再弹出任何窗口。您可以在“首选项”中重新打开它" +# AI Translated msgid "Filament-Saving Mode" -msgstr "耗材节省模式" +msgstr "耗材丝节省模式" msgid "Convenience Mode" msgstr "便捷模式" @@ -23991,14 +25253,17 @@ msgstr "便捷模式" msgid "Custom Mode" msgstr "自定义模式" +# AI Translated msgid "Generates filament grouping for the left and right nozzles based on the most filament-saving principles to minimize waste." -msgstr "根据最节省耗材的原则为左右喷嘴生成耗材分组，以最大程度地减少浪费。" +msgstr "根据最节省耗材丝的原则为左右喷嘴生成耗材丝分组，以最大程度地减少浪费。" +# AI Translated msgid "Generates filament grouping for the left and right nozzles based on the printer's actual filament status, reducing the need for manual filament adjustment." -msgstr "根据打印机实际耗材状态生成左右喷嘴耗材分组，减少手动耗材调整的需要。" +msgstr "根据打印机实际耗材丝状态生成左右喷嘴耗材丝分组，减少手动耗材丝调整的需要。" +# AI Translated msgid "Manually assign filament to the left or right nozzle" -msgstr "手动将耗材分配到左侧或右侧喷嘴" +msgstr "手动将耗材丝分配到左侧或右侧喷嘴" msgid "Global settings" msgstr "全局设置" @@ -24025,8 +25290,9 @@ msgstr "错误：右挤出机没有可用的高流量喷嘴，当前分组结果 msgid "We will slice according to this grouping method:" msgstr "我们将按照这种分组方法进行切片：" +# AI Translated msgid "Tip: You can drag the filaments to reassign them to different nozzles." -msgstr "提示：您可以拖动耗材以将它们重新分配到不同的喷嘴。" +msgstr "提示：您可以拖动耗材丝以将它们重新分配到不同的喷嘴。" # AI Translated msgid "Please adjust your grouping or click " @@ -24045,8 +25311,9 @@ msgstr "设置物理喷嘴数量……" msgid "(Std: %d, HF: %d)" msgstr "（标准：%d，高流量：%d）" +# AI Translated msgid "The filament grouping method for current plate is determined by the dropdown option at the slicing plate button." -msgstr "当前盘的耗材分组方法由切片盘按钮上的下拉选项确定。" +msgstr "当前盘的耗材丝分组方法由切片盘按钮上的下拉选项确定。" msgid "Connected to Obico successfully!" msgstr "已成功连接到Obico" @@ -24212,17 +25479,20 @@ msgstr "已选择" msgid "Auto-generate" msgstr "自动生成" +# AI Translated msgid "Generate brim ears using Max angle and Detection radius" -msgstr "使用最大角度和检测半径生成圆盘" +msgstr "使用“最大角度”和“检测半径”生成耳状 Brim" msgid "Add or Select" msgstr "添加或选择" +# AI Translated msgid "Warning: The brim type is not set to \"painted\", the brim ears will not take effect!" -msgstr "警告：Brim类型未设置为绘制模式，耳状Brim将不会生效！" +msgstr "警告：Brim类型未设置为绘制模式，耳状 Brim将不会生效！" +# AI Translated msgid "Set the brim type of this object to \"painted\"" -msgstr "将此对象的边缘类型设置为\"绘制\"" +msgstr "将此对象的Brim类型设置为\"绘制\"" # AI Translated #, c-format, boost-format @@ -24230,17 +25500,20 @@ msgid "%d invalid brim ear" msgid_plural "%d invalid brim ears" msgstr[0] "%d 个无效的耳状 Brim" +# AI Translated msgid "Brim Ears" -msgstr "耳状帽檐" +msgstr "耳状 Brim" msgid "Please select single object." msgstr "请选中单个对象。" +# AI Translated msgid "Entering Brim Ears" -msgstr "进入耳状帽檐" +msgstr "进入耳状 Brim" +# AI Translated msgid "Leaving Brim Ears" -msgstr "离开耳状帽檐" +msgstr "离开耳状 Brim" msgid "Zoom Out" msgstr "缩小" @@ -24262,8 +25535,9 @@ msgstr "/%d 已选择" msgid "Nothing selected" msgstr "未选择任何内容" +# AI Translated msgid "Over 64 objects in single plate" -msgstr "单盘超过 64 个物品" +msgstr "单个盘上的对象超过 64 个" msgid "The current print job cannot be skipped" msgstr "无法跳过当前打印作业" @@ -24280,8 +25554,9 @@ msgid "Skipping %d object." msgid_plural "Skipping %d objects." msgstr[0] "跳过 %d 个对象。" +# AI Translated msgid "This action cannot be undone. Continue?" -msgstr "此操作无法撤消。继续？" +msgstr "此操作无法撤销。继续？" msgid "Skipping objects." msgstr "跳过对象。" @@ -24298,8 +25573,9 @@ msgstr "模型高度" msgid "Ratio" msgstr "比例" +# AI Translated msgid "Select Filament" -msgstr "选择耗材" +msgstr "选择耗材丝" msgid "Null Color" msgstr "空颜色" @@ -24307,8 +25583,9 @@ msgstr "空颜色" msgid "Multiple Color" msgstr "多种颜色" +# AI Translated msgid "Official Filament" -msgstr "官方耗材" +msgstr "官方耗材丝" msgid "More Colors" msgstr "更多颜色" @@ -24379,8 +25656,9 @@ msgstr "立即重启" msgid "Restart Later" msgstr "稍后重启" +# AI Translated msgid "NO RAMMING AT ALL" -msgstr "完全不挤压" +msgstr "完全不进行尖端成型" msgid "s" msgstr "s" @@ -24510,23 +25788,28 @@ msgstr "保存预设包" msgid "Orca Preset Bundle (*.orca_bundle)|*.orca_bundle" msgstr "Orca 预设包 (*.orca_bundle)|*.orca_bundle" +# AI Translated msgid "Performing desktop integration failed - boost::filesystem::canonical did not return appimage path." -msgstr "执行桌面集成失败 - boost::filesystem::canonical 未返回 AppImage 路径。" +msgstr "执行桌面集成失败：boost::filesystem::canonical 未返回 AppImage 路径。" +# AI Translated msgid "Performing desktop integration failed - Could not find executable." -msgstr "执行桌面集成失败 - 无法找到可执行文件。" +msgstr "执行桌面集成失败：无法找到可执行文件。" msgid "Performing desktop integration failed because the application directory was not found." msgstr "执行桌面集成失败，因为未找到应用程序目录。" +# AI Translated msgid "Performing desktop integration failed - could not create Gcodeviewer desktop file. OrcaSlicer desktop file was probably created successfully." -msgstr "执行桌面集成失败 - 无法创建 Gcodeviewer 桌面文件。OrcaSlicer 桌面文件可能已成功创建。" +msgstr "执行桌面集成失败：无法创建 Gcodeviewer 桌面文件。OrcaSlicer 桌面文件可能已成功创建。" +# AI Translated msgid "Performing downloader desktop integration failed - boost::filesystem::canonical did not return appimage path." -msgstr "执行下载器桌面集成失败 - boost::filesystem::canonical 未返回 AppImage 路径。" +msgstr "执行下载器桌面集成失败：boost::filesystem::canonical 未返回 AppImage 路径。" +# AI Translated msgid "Performing downloader desktop integration failed - Could not find executable." -msgstr "执行下载器桌面集成失败 - 无法找到可执行文件。" +msgstr "执行下载器桌面集成失败：无法找到可执行文件。" msgid "Performing downloader desktop integration failed because the application directory was not found." msgstr "执行下载器桌面集成失败，因为未找到应用程序目录。" @@ -24588,7 +25871,7 @@ msgstr "AMS 干燥控制" # AI Translated msgid "Filament Drying Settings" -msgstr "耗材干燥设置" +msgstr "耗材丝干燥设置" # AI Translated msgctxt "Hours unit" @@ -24613,11 +25896,11 @@ msgstr "请查看助手进行故障排查" # AI Translated msgid "Please remove and store the filament (as shown)." -msgstr "请取出并妥善存放耗材（如图所示）。" +msgstr "请取出并妥善存放耗材丝（如图所示）。" # AI Translated msgid "The AMS can rotate the filament which is properly stored, providing better drying results." -msgstr "AMS 可以旋转妥善存放的耗材，从而提供更好的干燥效果。" +msgstr "AMS 可以旋转妥善存放的耗材丝，从而提供更好的干燥效果。" # AI Translated msgid "Rotate spool when drying" @@ -24648,7 +25931,7 @@ msgstr "%s 的最低干燥温度为 %d℃。" # AI Translated msgid "This filament may not be completely dried." -msgstr "此耗材可能未完全干燥。" +msgstr "此耗材丝可能未完全干燥。" # AI Translated msgid "This AMS is currently printing. To ensure print quality, the drying temperature cannot exceed the recommended drying temperature." @@ -24656,7 +25939,7 @@ msgstr "此 AMS 当前正在打印。为确保打印质量，干燥温度不能 # AI Translated msgid "The temperature shall not exceed the filament's heat distortion temperature" -msgstr "温度不应超过耗材的热变形温度" +msgstr "温度不应超过耗材丝的热变形温度" # AI Translated msgid "Minimum time value cannot be less than 1." @@ -24680,15 +25963,15 @@ msgstr "AMS 忙碌中" # AI Translated msgid " AMS is calibrating | reading RFID | loading/unloading material, please wait." -msgstr " AMS 正在校准 | 读取 RFID | 装载/卸载材料，请稍候。" +msgstr " AMS 正在校准 | 读取 RFID | 进料/退料，请稍候。" # AI Translated msgid "Filament in AMS outlet" -msgstr "AMS 出口处有耗材" +msgstr "AMS 出口处有耗材丝" # AI Translated msgid " The high drying temperature may cause AMS blockage, please unload first." -msgstr " 较高的干燥温度可能导致 AMS 堵塞，请先卸载。" +msgstr " 较高的干燥温度可能导致 AMS 堵塞，请先退料。" # AI Translated msgid "Initiating AMS drying" @@ -24716,7 +25999,7 @@ msgstr " 请接通电源，然后再使用干燥功能。" # AI Translated msgid " The high drying temperature may cause AMS blockage. Please unload the filament manually before proceeding." -msgstr " 较高的干燥温度可能导致 AMS 堵塞。请在继续前手动卸载耗材。" +msgstr " 较高的干燥温度可能导致 AMS 堵塞。请在继续前手动退料。" # AI Translated msgid "System is busy" @@ -24728,27 +26011,27 @@ msgstr " 正在启动其他干燥进程，请稍候几秒……" # AI Translated msgid "For better drying results, remove the filament and allow it to rotate." -msgstr "为获得更好的干燥效果，请取出耗材并让其旋转。" +msgstr "为获得更好的干燥效果，请取出耗材丝并让其旋转。" # AI Translated msgid "The AMS will automatically rotate the stored filament slots to enhance the drying performance." -msgstr "AMS 将自动旋转已存放的耗材槽位以增强干燥效果。" +msgstr "AMS 将自动旋转已存放的耗材丝槽位以增强干燥效果。" # AI Translated msgid "Alternatively, you can dry the filament without removing it." -msgstr "或者，您也可以不取出耗材直接进行干燥。" +msgstr "或者，您也可以不取出耗材丝直接进行干燥。" # AI Translated msgid "Unknown filaments will be treated as PLA." -msgstr "未知耗材将按 PLA 处理。" +msgstr "未知耗材丝将按 PLA 处理。" # AI Translated msgid "Please store the filament marked with an exclamation mark." -msgstr "请存放标有感叹号的耗材。" +msgstr "请存放标有感叹号的耗材丝。" # AI Translated msgid "Filament left in the feeder during drying may soften because the drying temperature exceeds the softening point of materials like PLA and TPU." -msgstr "干燥期间留在送料器中的耗材可能会软化，因为干燥温度超过了 PLA 和 TPU 等材料的软化点。" +msgstr "干燥期间留在送料器中的耗材丝可能会软化，因为干燥温度超过了 PLA 和 TPU 等材料的软化点。" # AI Translated msgid "Starting: Checking adapter connection" @@ -24756,7 +26039,7 @@ msgstr "开始：检查适配器连接" # AI Translated msgid "Starting: Checking filament status" -msgstr "开始：检查耗材状态" +msgstr "开始：检查耗材丝状态" # AI Translated msgid "Starting: Checking drying presets" @@ -24764,7 +26047,7 @@ msgstr "开始：检查干燥预设" # AI Translated msgid "Starting: Checking filament location" -msgstr "开始：检查耗材位置" +msgstr "开始：检查耗材丝位置" # AI Translated msgid "Starting: Checking air intake" @@ -24779,20 +26062,25 @@ msgstr "开始：检查排气口" msgid "Unable to create directory %1%" msgstr "无法创建目录 %1%" +# AI Translated msgid "The filament may not be compatible with the current machine settings. Generic filament presets will be used." -msgstr "此耗材可能于当前设备设置不兼容，将使用通用耗材预设。" +msgstr "此耗材丝可能与当前设备设置不兼容，将使用通用耗材丝预设。" +# AI Translated msgid "The filament model is unknown. Still using the previous filament preset." -msgstr "此耗材型号未知，将使用先前的耗材预设。" +msgstr "此耗材丝型号未知，将使用先前的耗材丝预设。" +# AI Translated msgid "The filament model is unknown. Generic filament presets will be used." -msgstr "此耗材型号未知，将使用通用耗材预设。" +msgstr "此耗材丝型号未知，将使用通用耗材丝预设。" +# AI Translated msgid "The filament may not be compatible with the current machine settings. A random filament preset will be used." -msgstr "此耗材可能与当前设备设置不兼容，将使用随机耗材预设。" +msgstr "此耗材丝可能与当前设备设置不兼容，将使用随机耗材丝预设。" +# AI Translated msgid "The filament model is unknown. A random filament preset will be used." -msgstr "此耗材可能于当前设备设置不兼容，将使用随机耗材预设。" +msgstr "此耗材丝型号未知，将使用随机耗材丝预设。" # AI Translated #, boost-format @@ -24911,7 +26199,7 @@ msgstr "显示打印机热床及其网格" # AI Translated msgid "Click a reference plane or a flat face to sketch on it — Esc cancels" -msgstr "单击基准面或平面以在其上绘制草图 — 按 Esc 取消" +msgstr "单击基准面或平面以在其上绘制草图，按 Esc 取消" # AI Translated msgid "Construction" @@ -24924,71 +26212,71 @@ msgstr "%s · 平面：%s" # AI Translated msgid "Line — click start, then end" -msgstr "直线 — 单击起点，然后单击终点" +msgstr "直线：单击起点，然后单击终点" # AI Translated msgid "Rectangle — click two opposite corners" -msgstr "矩形 — 单击两个对角" +msgstr "矩形：单击两个对角" # AI Translated msgid "Circle — click center, then radius" -msgstr "圆 — 单击圆心，然后单击确定半径" +msgstr "圆：单击圆心，然后单击确定半径" # AI Translated msgid "Arc — click start, end, then a point" -msgstr "圆弧 — 依次单击起点、终点，然后单击一个点" +msgstr "圆弧：依次单击起点、终点，然后单击一个点" # AI Translated msgid "Slot — two centerline ends, then the width" -msgstr "槽口 — 中心线两端，然后是宽度" +msgstr "槽口：中心线两端，然后是宽度" # AI Translated msgid "Ellipse — center, major end, minor point" -msgstr "椭圆 — 中心、长轴端点、短轴上的点" +msgstr "椭圆：中心、长轴端点、短轴上的点" # AI Translated msgid "Spline — click control points" -msgstr "样条曲线 — 单击控制点" +msgstr "样条曲线：单击控制点" # AI Translated msgid "Point — click to place" -msgstr "点 — 单击放置" +msgstr "点：单击放置" # AI Translated msgid "Dimension — click 2 points or an entity" -msgstr "尺寸 — 单击 2 个点或一个图元" +msgstr "尺寸：单击 2 个点或一个图元" # AI Translated msgid "Trim — click a segment to trim it" -msgstr "修剪 — 单击要修剪的线段" +msgstr "修剪：单击要修剪的线段" # AI Translated msgid "Extend — click a line/arc to extend it" -msgstr "延伸 — 单击要延伸的直线/圆弧" +msgstr "延伸：单击要延伸的直线/圆弧" # AI Translated msgid "Offset — pick an entity, drag the distance" -msgstr "偏移 — 选取一个图元，拖动设置距离" +msgstr "偏移：选取一个图元，拖动设置距离" # AI Translated msgid "Mirror — pick axis, then entities" -msgstr "镜像 — 选取镜像轴，然后选取图元" +msgstr "镜像：选取镜像轴，然后选取图元" # AI Translated msgid "Fillet — pick two lines, set the radius" -msgstr "圆角 — 选取两条直线，设置半径" +msgstr "圆角：选取两条直线，设置半径" # AI Translated msgid "Chamfer — pick two lines, set the distance" -msgstr "倒角 — 选取两条直线，设置距离" +msgstr "倒角：选取两条直线，设置距离" # AI Translated msgid "Polygon — click center, then a vertex" -msgstr "多边形 — 单击中心，然后单击一个顶点" +msgstr "多边形：单击中心，然后单击一个顶点" # AI Translated msgid "Nothing here has a value to type — pick a line, an arc, a circle, or two entities" -msgstr "此处没有可输入的值 — 请选取一条直线、一段圆弧、一个圆或两个图元" +msgstr "此处没有可输入的值，请选取一条直线、一段圆弧、一个圆或两个图元" # AI Translated msgid "Normal to the sketch plane" @@ -25097,7 +26385,7 @@ msgstr "将实体面偏移为薄板（新实体）" # AI Translated msgid "Thicken needs a solid body — add or import one first" -msgstr "加厚需要一个实体 — 请先添加或导入实体" +msgstr "加厚需要一个实体，请先添加或导入实体" # AI Translated #, c-format @@ -25115,7 +26403,7 @@ msgstr "从开放的草图线生成薄壁，并与实体融合" # AI Translated msgid "Rib needs a solid body — add or import one first" -msgstr "肋条需要一个实体 — 请先添加或导入实体" +msgstr "肋条需要一个实体，请先添加或导入实体" # AI Translated msgid "Create a sketch with an open line first" @@ -25132,7 +26420,7 @@ msgstr "请先创建要阵列的实体" # AI Translated msgid "Pattern — needs a solid body to replicate" -msgstr "阵列 — 需要一个可复制的实体" +msgstr "阵列：需要一个可复制的实体" # AI Translated msgid "Surface (extrude / revolve / loft / fill / offset / thicken)" @@ -25188,7 +26476,7 @@ msgstr "按带符号的距离偏移曲面实体的壳体" # AI Translated msgid "No sheet body to offset — create a surface feature first" -msgstr "没有可偏移的曲面实体 — 请先创建曲面特征" +msgstr "没有可偏移的曲面实体，请先创建曲面特征" # AI Translated msgid "Thicken Surface" @@ -25200,7 +26488,7 @@ msgstr "将曲面实体加厚为实体" # AI Translated msgid "No sheet body to thicken — create a surface feature first" -msgstr "没有可加厚的曲面实体 — 请先创建曲面特征" +msgstr "没有可加厚的曲面实体，请先创建曲面特征" # AI Translated msgid "Datum / Curve (plane / axis / coord sys / helix / project)" @@ -25237,7 +26525,7 @@ msgstr "螺旋线" # AI Translated msgid "Helical curve (spring path) — use as a sweep path for coils / springs / augers" -msgstr "螺旋曲线（弹簧路径） — 用作线圈 / 弹簧 / 螺旋钻的扫掠路径" +msgstr "螺旋曲线（弹簧路径）：用作线圈 / 弹簧 / 螺旋钻的扫掠路径" # AI Translated msgctxt "Design" @@ -25250,7 +26538,7 @@ msgstr "将实体边线投影到平面上，作为草图图元" # AI Translated msgid "Project needs a body — add or import one first" -msgstr "投影需要一个实体 — 请先添加或导入实体" +msgstr "投影需要一个实体，请先添加或导入实体" # AI Translated #, c-format, boost-format @@ -25275,7 +26563,7 @@ msgstr "移动和/或旋转现有实体" # AI Translated msgid "Transform needs a body — add or import one first" -msgstr "变换需要一个实体 — 请先添加或导入实体" +msgstr "变换需要一个实体，请先添加或导入实体" # AI Translated msgctxt "Design" @@ -25288,7 +26576,7 @@ msgstr "相对于平面镜像实体" # AI Translated msgid "Mirror needs a body — add or import one first" -msgstr "镜像需要一个实体 — 请先添加或导入实体" +msgstr "镜像需要一个实体，请先添加或导入实体" # AI Translated msgid "Mate" @@ -25304,7 +26592,7 @@ msgstr "布尔（组合实体）" # AI Translated msgid "Boolean — needs two solid bodies to combine" -msgstr "布尔 — 需要两个实体进行组合" +msgstr "布尔：需要两个实体进行组合" # AI Translated msgid "Cut (split a body with a plane)" @@ -25316,15 +26604,15 @@ msgstr "请先创建要切割的实体" # AI Translated msgid "Cut — needs a solid body to slice" -msgstr "切割 — 需要一个可切割的实体" +msgstr "切割：需要一个可切割的实体" # AI Translated msgid "Color — set the selected body's display color" -msgstr "颜色 — 设置所选实体的显示颜色" +msgstr "颜色：设置所选实体的显示颜色" # AI Translated msgid "Select a feature, or a body, first — then rename it" -msgstr "请先选择一个特征或实体 — 然后重命名" +msgstr "请先选择一个特征或实体，然后重命名" # AI Translated msgid "Fillet / chamfer / draft / shell / delete face" @@ -25365,7 +26653,7 @@ msgstr "从实体中移除面并修复实体" # AI Translated msgid "Delete Face needs a body — add or import one first" -msgstr "删除面需要一个实体 — 请先添加或导入实体" +msgstr "删除面需要一个实体，请先添加或导入实体" # AI Translated msgid "(none)" @@ -25431,7 +26719,7 @@ msgstr "直线" # AI Translated msgid "Click start, then end — then set the exact length" -msgstr "单击起点，然后单击终点 — 再设置精确长度" +msgstr "单击起点，然后单击终点，再设置精确长度" # AI Translated msgid "Polyline" @@ -25574,15 +26862,15 @@ msgstr "单击放置点" # AI Translated msgid "Select — click to select; Shift to add" -msgstr "选择 — 单击选择；按住 Shift 添加" +msgstr "选择：单击选择；按住 Shift 添加" # AI Translated msgid "Text — emboss text as a profile" -msgstr "文字 — 将文字生成为轮廓" +msgstr "文字：将文字生成为轮廓" # AI Translated msgid "SVG — import an outline as a profile" -msgstr "SVG — 导入轮廓线作为草图轮廓" +msgstr "SVG：导入轮廓线作为草图轮廓" # AI Translated msgid "Fillet / chamfer" @@ -25634,7 +26922,7 @@ msgstr "单击直线或圆弧，将其延伸到最近的图元；按 Esc 退出" # AI Translated msgid "Constrain — add geometric/dimensional relations" -msgstr "约束 — 添加几何/尺寸关系" +msgstr "约束：添加几何/尺寸关系" # AI Translated msgid "Move / rotate / scale" @@ -25688,13 +26976,13 @@ msgstr "选取图元，拖动总角度控制柄，单击数量值；单击空白 #, c-format, boost-format msgid "Click center then a vertex — %d side, circumscribed" msgid_plural "Click center then a vertex — %d sides, circumscribed" -msgstr[0] "单击中心，然后单击一个顶点 — %d 条边，外接" +msgstr[0] "单击中心，然后单击一个顶点（%d 条边，外接）" # AI Translated #, c-format, boost-format msgid "Click center then a vertex — %d side, inscribed" msgid_plural "Click center then a vertex — %d sides, inscribed" -msgstr[0] "单击中心，然后单击一个顶点 — %d 条边，内接" +msgstr[0] "单击中心，然后单击一个顶点（%d 条边，内接）" # AI Translated msgid "Polygon" @@ -25809,7 +27097,7 @@ msgstr "竖直距离" # AI Translated msgid "New Design — clear the feature tree" -msgstr "新建设计 — 清空特征树" +msgstr "新建设计：清空特征树" # AI Translated msgid "Import STEP (editable B-rep solid)" @@ -25829,15 +27117,15 @@ msgstr "新建草图" # AI Translated msgid "Place on Face (F) — lay the picked face on the bed" -msgstr "选择底面 (F) — 将选取的面放置在热床上" +msgstr "选择底面 (F)：将选取的面放置在热床上" # AI Translated msgid "Section View — hide part of the model to see inside. PageUp/PageDown move the plane; Delete removes it." -msgstr "剖面视图 — 隐藏模型的一部分以查看内部。PageUp/PageDown 移动剖切面；Delete 将其移除。" +msgstr "剖面视图：隐藏模型的一部分以查看内部。PageUp/PageDown 移动剖切面；Delete 将其移除。" # AI Translated msgid "Flip Section — show the opposite half" -msgstr "翻转剖面 — 显示另一半" +msgstr "翻转剖面：显示另一半" # AI Translated msgid "Choose how Commit to Plate sends the bodies" @@ -25927,8 +27215,9 @@ msgstr "成形到面" msgid "Up to vertex" msgstr "成形到顶点" +# AI Translated msgid "End" -msgstr "结束" +msgstr "终止条件" # AI Translated msgid "2nd dist" @@ -25966,7 +27255,7 @@ msgstr "反转方向" # AI Translated msgid "(no edge picked — group below)" -msgstr "（未选取边 — 使用下方的分组）" +msgstr "（未选取边，使用下方的分组）" msgid "Bottom" msgstr "底部" @@ -26021,7 +27310,7 @@ msgstr "贯穿" # AI Translated msgid "(none — uses Hole plane)" -msgstr "（无 — 使用孔平面）" +msgstr "（无，使用孔平面）" # AI Translated msgid "On face" @@ -26046,7 +27335,7 @@ msgstr "螺纹深度" # AI Translated msgid "(none — uses Thread plane)" -msgstr "（无 — 使用螺纹平面）" +msgstr "（无，使用螺纹平面）" # AI Translated msgid "Plane X" @@ -26088,7 +27377,7 @@ msgstr "布尔" # AI Translated msgid "Subtract" -msgstr "相减" +msgstr "减去" # AI Translated msgid "Target (kept)" @@ -26209,7 +27498,7 @@ msgstr "将曲面实体加厚为实体。“翻转”可反转方向。" # AI Translated msgid "(all faces — closed hollow)" -msgstr "（所有面 — 封闭中空）" +msgstr "（所有面，封闭空心）" # AI Translated msgid "Open face" @@ -26288,7 +27577,7 @@ msgstr "（选取一个实体面）" # AI Translated msgid "Pick a solid face and offset it into a new thin body. Not for sheet bodies — use Thicken Surface for those." -msgstr "选取一个实体面并将其偏移为新的薄实体。不适用于曲面实体 — 曲面实体请使用“加厚曲面”。" +msgstr "选取一个实体面并将其偏移为新的薄实体。不适用于曲面实体，曲面实体请使用“加厚曲面”。" # AI Translated msgid "Target body" @@ -26421,7 +27710,7 @@ msgstr "（全部）" # AI Translated msgid "Restrict picking to one body — the others go see-through and stop catching clicks" -msgstr "将选取限制在一个实体上 — 其他实体变为透明且不再响应单击" +msgstr "将选取限制在一个实体上，其他实体变为透明且不再响应单击" # AI Translated msgid "Edge (sets in-plane direction)" @@ -26429,7 +27718,7 @@ msgstr "边（设置平面内方向）" # AI Translated msgid "Without an edge the frame takes X from the face's first edge — pick one to choose it yourself" -msgstr "如未选取边，坐标系将以该面的第一条边作为 X 方向 — 选取一条边可自行指定" +msgstr "如未选取边，坐标系将以该面的第一条边作为 X 方向；选取一条边可自行指定" # AI Translated msgid "X direction X" @@ -26445,23 +27734,23 @@ msgstr "X 方向 Z" # AI Translated msgid "Fastened — 6 DOF locked, B driven onto A exactly" -msgstr "紧固 — 锁定全部 6 个自由度，B 精确贴合到 A" +msgstr "紧固：锁定全部 6 个自由度，B 精确贴合到 A" # AI Translated msgid "Planar — z aligned, offset distance; free in-plane slide" -msgstr "平面 — z 轴对齐，偏移距离；可在平面内自由滑动" +msgstr "平面：z 轴对齐，偏移距离；可在平面内自由滑动" # AI Translated msgid "Revolute — axes collinear; free rotation about z" -msgstr "旋转 — 轴共线；可绕 z 轴自由旋转" +msgstr "旋转：轴共线；可绕 z 轴自由旋转" # AI Translated msgid "Slider — orientation locked; free axial slide" -msgstr "滑块 — 方向锁定；可沿轴向自由滑动" +msgstr "滑块：方向锁定；可沿轴向自由滑动" # AI Translated msgid "Cylindrical — axes collinear; free spin + axial slide" -msgstr "圆柱 — 轴共线；可自由旋转并沿轴向滑动" +msgstr "圆柱：轴共线；可自由旋转并沿轴向滑动" # AI Translated msgid "Kind" @@ -26531,7 +27820,7 @@ msgstr "%s。单击眼睛图标可压缩此配合。" # AI Translated #, c-format, boost-format msgid "%s selected — F2 or right-click renames it, double-click edits it" -msgstr "已选择 %s — 按 F2 或右键单击可重命名，双击可编辑" +msgstr "已选择 %s，按 F2 或右键单击可重命名，双击可编辑" # AI Translated msgid "Rename\tF2" @@ -26559,7 +27848,7 @@ msgstr "缩放到所选内容" # AI Translated msgid "Check interference — find overlapping bodies" -msgstr "干涉检查 — 查找重叠的实体" +msgstr "干涉检查：查找重叠的实体" # AI Translated msgid "Bodies" @@ -26567,12 +27856,12 @@ msgstr "实体" # AI Translated msgid "Boolean — join, subtract or intersect with another body" -msgstr "布尔 — 与另一个实体合并、相减或相交" +msgstr "布尔：与另一个实体合并、减去或相交" # AI Translated #, c-format, boost-format msgid "Body %d selected — right-click for what applies to it" -msgstr "已选择实体 %d — 右键单击查看适用的操作" +msgstr "已选择实体 %d，右键单击查看适用的操作" # AI Translated msgid "Variables" @@ -26592,11 +27881,11 @@ msgstr "删除变量" # AI Translated msgid "Sketch created — select it, then right-click to Extrude" -msgstr "草图已创建 — 选择它，然后右键单击进行拉伸" +msgstr "草图已创建，请选择它，然后右键单击进行拉伸" # AI Translated msgid "Sketch empty — nothing committed" -msgstr "草图为空 — 未提交任何内容" +msgstr "草图为空，未提交任何内容" # AI Translated msgid "Sketch updated" @@ -26606,7 +27895,7 @@ msgstr "草图已更新" #, c-format msgid "Sketch created (%zu driving dim) — select it, then right-click to Extrude" msgid_plural "Sketch created (%zu driving dims) — select it, then right-click to Extrude" -msgstr[0] "草图已创建（%zu 个驱动尺寸） — 选择它，然后右键单击进行拉伸" +msgstr[0] "草图已创建（%zu 个驱动尺寸），请选择它，然后右键单击进行拉伸" # AI Translated #, c-format, boost-format @@ -26623,84 +27912,84 @@ msgstr "无法解析要拉伸的草图" # AI Translated msgid "Face selected — set the depth and Confirm" -msgstr "已选择面 — 设置深度并单击“确定”" +msgstr "已选择面，设置深度并单击“确定”" # AI Translated msgid "Region selected — right-click to Extrude, or double-click to edit" -msgstr "已选择区域 — 右键单击进行拉伸，或双击进行编辑" +msgstr "已选择区域，右键单击进行拉伸，或双击进行编辑" # AI Translated msgid "Sketch selected — right-click to Extrude, or double-click to edit" -msgstr "已选择草图 — 右键单击进行拉伸，或双击进行编辑" +msgstr "已选择草图，右键单击进行拉伸，或双击进行编辑" # AI Translated msgid "That face is not flat — click a flat face or a reference plane" -msgstr "该面不是平面 — 请单击平面或基准面" +msgstr "该面不是平面，请单击平面或基准面" # AI Translated #, c-format, boost-format msgid "Body %d: vertex selected — click again for the whole body" -msgstr "实体 %d：已选择顶点 — 再次单击选择整个实体" +msgstr "实体 %d：已选择顶点，再次单击选择整个实体" # AI Translated msgid "Vertex selected — click again for the whole body" -msgstr "已选择顶点 — 再次单击选择整个实体" +msgstr "已选择顶点，再次单击选择整个实体" # AI Translated #, c-format, boost-format msgid "Body %d selected (whole body) — right-click for what applies to it" -msgstr "已选中实体 %d（整个实体） — 右键单击查看适用的操作" +msgstr "已选中实体 %d（整个实体），右键单击查看适用的操作" # AI Translated msgid "Whole body selected — right-click for what applies to it" -msgstr "已选中整个实体 — 右键单击查看适用的操作" +msgstr "已选中整个实体，右键单击查看适用的操作" # AI Translated #, c-format, boost-format msgid "Body %d: face %d selected — right-click to push/pull it, or click again for the whole body" -msgstr "实体 %d：已选择面 %d — 右键单击可推/拉该面，或再次单击选择整个实体" +msgstr "实体 %d：已选择面 %d，右键单击可推/拉该面，或再次单击选择整个实体" # AI Translated #, c-format, boost-format msgid "Face %d selected — right-click to push/pull it, or click again for the whole body" -msgstr "已选择面 %d — 右键单击可推/拉该面，或再次单击选择整个实体" +msgstr "已选择面 %d，右键单击可推/拉该面，或再次单击选择整个实体" # AI Translated #, c-format msgid "Body %d: %zu edge selected — Shift+click adds or removes one, Fillet/Chamfer dresses them all" msgid_plural "Body %d: %zu edges selected — Shift+click adds or removes one, Fillet/Chamfer dresses them all" -msgstr[0] "实体 %d：已选择 %zu 条边 — 按住 Shift 单击可添加或移除一条边，圆角/倒角会修饰所有选中的边" +msgstr[0] "实体 %d：已选择 %zu 条边，按住 Shift 单击可添加或移除一条边，圆角/倒角会修饰所有选中的边" # AI Translated #, c-format msgid "%zu edge selected — Shift+click adds or removes one, Fillet/Chamfer dresses them all" msgid_plural "%zu edges selected — Shift+click adds or removes one, Fillet/Chamfer dresses them all" -msgstr[0] "已选择 %zu 条边 — 按住 Shift 单击可添加或移除一条边，圆角/倒角会修饰所有选中的边" +msgstr[0] "已选择 %zu 条边，按住 Shift 单击可添加或移除一条边，圆角/倒角会修饰所有选中的边" # AI Translated #, c-format, boost-format msgid "Body %d: edge %d selected — Shift+click to add edges, or click again for the whole body" -msgstr "实体 %d：已选择边 %d — 按住 Shift 单击可添加更多边，或再次单击选择整个实体" +msgstr "实体 %d：已选择边 %d，按住 Shift 单击可添加更多边，或再次单击选择整个实体" # AI Translated #, c-format, boost-format msgid "Edge %d selected — Shift+click to add edges, or click again for the whole body" -msgstr "已选择边 %d — 按住 Shift 单击可添加更多边，或再次单击选择整个实体" +msgstr "已选择边 %d，按住 Shift 单击可添加更多边，或再次单击选择整个实体" # AI Translated #, c-format, boost-format msgid "%s plane selected — right-click to sketch on it, or click an object to select it" -msgstr "已选择 %s 平面 — 右键单击可在其上绘制草图，或单击对象以选择它" +msgstr "已选择 %s 平面，右键单击可在其上绘制草图，或单击对象以选择它" # AI Translated #, c-format, boost-format msgid "Body %d placed at (%.1f, %.1f, %.1f) mm — drag arrows to move, rings to rotate" -msgstr "实体 %d 已放置于 (%.1f, %.1f, %.1f) mm — 拖动箭头移动，拖动圆环旋转" +msgstr "实体 %d 已放置于 (%.1f, %.1f, %.1f) mm，拖动箭头移动，拖动圆环旋转" # AI Translated #, c-format, boost-format msgid "Placed at (%.1f, %.1f, %.1f) mm — drag arrows to move, rings to rotate" -msgstr "已放置于 (%.1f, %.1f, %.1f) mm — 拖动箭头移动，拖动圆环旋转" +msgstr "已放置于 (%.1f, %.1f, %.1f) mm，拖动箭头移动，拖动圆环旋转" # AI Translated msgid "Tool exited" @@ -26708,7 +27997,7 @@ msgstr "已退出工具" # AI Translated msgid "Sketch kept — Confirm to commit it, Cancel to discard" -msgstr "草图已保留 — 单击“确定”提交，单击“取消”放弃" +msgstr "草图已保留，单击“确定”提交，单击“取消”放弃" # AI Translated msgid "Select something to delete" @@ -26742,15 +28031,15 @@ msgstr "正在编辑：草图 %d · N = 正视于平面 · 在工具栏 #, c-format msgid "OK — %zu triangle" msgid_plural "OK — %zu triangles" -msgstr[0] "完成 — %zu 个三角形" +msgstr[0] "完成：%zu 个三角形" # AI Translated msgid "Edit the text — Enter applies, Esc keeps it as it was" -msgstr "编辑文字 — 按 Enter 应用，按 Esc 保持原样" +msgstr "编辑文字：按 Enter 应用，按 Esc 保持原样" # AI Translated msgid "Type the text — it appears in the view as you type; Enter inserts, Esc cancels" -msgstr "输入文字 — 输入时会实时显示在视图中；按 Enter 插入，按 Esc 取消" +msgstr "输入文字：输入时会实时显示在视图中；按 Enter 插入，按 Esc 取消" # AI Translated msgid "Text unchanged" @@ -26797,7 +28086,7 @@ msgstr "正在重建模型…" #, c-format, boost-format msgid "Imported %d solid — pick a face or edge, then Fillet / Cut / Shell to modify" msgid_plural "Imported %d solids — pick a face or edge, then Fillet / Cut / Shell to modify" -msgstr[0] "已导入 %d 个实体 — 选取一个面或边，然后使用圆角 / 切割 / 抽壳进行修改" +msgstr[0] "已导入 %d 个实体，选取一个面或边，然后使用圆角 / 切割 / 抽壳进行修改" # AI Translated msgid "Import mesh" @@ -26864,7 +28153,7 @@ msgstr "网格导入失败：%s" # AI Translated #, c-format, boost-format msgid "Imported solid — triangles: %d → faces: %d, volume %.2f mm³. Pick a face or edge, then Fillet / Cut / Shell to modify" -msgstr "已导入实体 — 三角形：%d → 面：%d，体积 %.2f mm³。选取一个面或边，然后使用圆角 / 切割 / 抽壳进行修改" +msgstr "已导入实体，三角形：%d → 面：%d，体积 %.2f mm³。选取一个面或边，然后使用圆角 / 切割 / 抽壳进行修改" # AI Translated #, c-format, boost-format @@ -26878,13 +28167,13 @@ msgstr "未找到可导入的几何体" # AI Translated #, c-format, boost-format msgid "%s added to the sketch — Confirm to commit it" -msgstr "%s 已添加到草图 — 单击“确定”提交" +msgstr "%s 已添加到草图，单击“确定”提交" # AI Translated #. TRN Design tab status; %s is the inserted item, such as "Text" or "SVG". #, c-format, boost-format msgid "%s — drag to place/size, then Confirm" -msgstr "%s — 拖动以放置/调整大小，然后单击“确定”" +msgstr "%s：拖动以放置/调整大小，然后单击“确定”" # AI Translated msgid "Insert canceled" @@ -26892,12 +28181,12 @@ msgstr "已取消插入" # AI Translated msgid "Drag a corner to scale, the center to move — Enter or ✓ when done, Esc to discard" -msgstr "拖动角点缩放，拖动中心移动 — 完成后按 Enter 或 ✓，按 Esc 放弃" +msgstr "拖动角点缩放，拖动中心移动，完成后按 Enter 或 ✓，按 Esc 放弃" # AI Translated #, c-format, boost-format msgid "Sketch added (plane: %s) — select it, then right-click to Extrude" -msgstr "已添加草图（平面：%s） — 选择它，然后右键单击进行拉伸" +msgstr "已添加草图（平面：%s），请选择它，然后右键单击进行拉伸" # AI Translated #, c-format, boost-format @@ -26920,7 +28209,7 @@ msgstr "螺纹标准：%s （螺距 %.3g mm）" # AI Translated msgid "Thread needs a solid body — add or import one first" -msgstr "螺纹需要一个实体 — 请先添加或导入实体" +msgstr "螺纹需要一个实体，请先添加或导入实体" # AI Translated msgid "Pick a sketch profile to revolve first" @@ -26928,7 +28217,7 @@ msgstr "请先选取要旋转的草图轮廓" # AI Translated msgid "Revolve needs a solid body — add or import one first" -msgstr "旋转需要一个实体 — 请先添加或导入实体" +msgstr "旋转需要一个实体，请先添加或导入实体" # AI Translated msgid "Pick a profile sketch to sweep first" @@ -26940,7 +28229,7 @@ msgstr "请选取用于扫掠的路径草图" # AI Translated msgid "Sweep needs a solid body — add or import one first" -msgstr "扫掠需要一个实体 — 请先添加或导入实体" +msgstr "扫掠需要一个实体，请先添加或导入实体" # AI Translated msgid "Check at least two profile sketches to loft" @@ -26948,7 +28237,7 @@ msgstr "请至少勾选两个轮廓草图以进行放样" # AI Translated msgid "Loft needs a solid body — add or import one first" -msgstr "放样需要一个实体 — 请先添加或导入实体" +msgstr "放样需要一个实体，请先添加或导入实体" # AI Translated msgid "Pick a sketch profile to extrude first" @@ -26976,7 +28265,7 @@ msgstr "请先添加至少一个要删除的面" # AI Translated msgid "Mate needs two coordinate systems — create them first" -msgstr "配合需要两个坐标系 — 请先创建它们" +msgstr "配合需要两个坐标系，请先创建它们" # AI Translated msgid "Mate: A and B must be different coordinate systems" @@ -27021,7 +28310,7 @@ msgstr "无法测量此实体" # AI Translated #, c-format, boost-format msgid "%s: sheet body, area %.2f mm², no volume — thicken it to get one" -msgstr "%s：曲面实体，表面积 %.2f mm²，无体积 — 加厚后即可获得体积" +msgstr "%s：曲面实体，表面积 %.2f mm²，无体积，加厚后即可获得体积" # AI Translated #, c-format, boost-format @@ -27030,15 +28319,15 @@ msgstr "%s：体积 %.2f mm³，表面积 %.2f mm²" # AI Translated msgid "Pattern needs a solid body — add or import one first" -msgstr "阵列需要一个实体 — 请先添加或导入实体" +msgstr "阵列需要一个实体，请先添加或导入实体" # AI Translated msgid "Boolean needs two bodies — add or import a second one" -msgstr "布尔需要两个实体 — 请添加或导入第二个实体" +msgstr "布尔需要两个实体，请添加或导入第二个实体" # AI Translated msgid "Cut needs a solid body — add or import one first" -msgstr "切割需要一个实体 — 请先添加或导入实体" +msgstr "切割需要一个实体，请先添加或导入实体" # AI Translated #, c-format, boost-format @@ -27104,7 +28393,7 @@ msgstr[0] "已选择 %d 个 · 按 Del 删除 · 按住 Shift 单击可添 # AI Translated msgid "Select — click an entity to pick it · drag an endpoint or center to move it · Shift-click adds · Del removes" -msgstr "选择 — 单击图元进行选取 · 拖动端点或中心可移动 · 按住 Shift 单击可添加 · 按 Del 删除" +msgstr "选择：单击图元进行选取 · 拖动端点或中心可移动 · 按住 Shift 单击可添加 · 按 Del 删除" # AI Translated #, c-format, boost-format @@ -27114,305 +28403,305 @@ msgstr[0] "已选取 %d 个 · 现在选择一个约束（水平、平行、 # AI Translated msgid "Constrain — click one or two entities, then choose a constraint" -msgstr "约束 — 单击一个或两个图元，然后选择约束" +msgstr "约束：单击一个或两个图元，然后选择约束" # AI Translated msgid "Dimension — click an entity, or the first of two points" -msgstr "尺寸 — 单击一个图元，或两个点中的第一个点" +msgstr "尺寸：单击一个图元，或两个点中的第一个点" # AI Translated msgid "Dimension — click the second point" -msgstr "尺寸 — 单击第二个点" +msgstr "尺寸：单击第二个点" # AI Translated msgid "Line — click the start point" -msgstr "直线 — 单击起点" +msgstr "直线：单击起点" # AI Translated msgid "Line — click the end point; its length and angle can then be typed" -msgstr "直线 — 单击终点；之后可输入其长度和角度" +msgstr "直线：单击终点；之后可输入其长度和角度" # AI Translated msgid "Polyline — click the first point" -msgstr "多段线 — 单击第一个点" +msgstr "多段线：单击第一个点" # AI Translated msgid "Polyline — click the next point · click the start point to close it · right-click, double-click or Enter ends the chain" -msgstr "多段线 — 单击下一个点 · 单击起点以闭合 · 右键单击、双击或按 Enter 结束连线" +msgstr "多段线：单击下一个点 · 单击起点以闭合 · 右键单击、双击或按 Enter 结束连线" # AI Translated msgid "Rectangle — click one corner" -msgstr "矩形 — 单击一个角点" +msgstr "矩形：单击一个角点" # AI Translated msgid "Rectangle — click the opposite corner" -msgstr "矩形 — 单击对角点" +msgstr "矩形：单击对角点" # AI Translated msgid "Center rectangle — click the center" -msgstr "中心矩形 — 单击中心" +msgstr "中心矩形：单击中心" # AI Translated msgid "Center rectangle — click a corner" -msgstr "中心矩形 — 单击一个角点" +msgstr "中心矩形：单击一个角点" # AI Translated msgid "Oblique rectangle — click the start of the base edge" -msgstr "斜矩形 — 单击底边的起点" +msgstr "斜矩形：单击底边的起点" # AI Translated msgid "Oblique rectangle — click the end of the base edge (this sets the angle)" -msgstr "斜矩形 — 单击底边的终点（以此设置角度）" +msgstr "斜矩形：单击底边的终点（以此设置角度）" # AI Translated msgid "Oblique rectangle — click to set the width" -msgstr "斜矩形 — 单击以设置宽度" +msgstr "斜矩形：单击以设置宽度" # AI Translated msgid "Rounded rectangle — click one corner" -msgstr "圆角矩形 — 单击一个角点" +msgstr "圆角矩形：单击一个角点" # AI Translated msgid "Rounded rectangle — click the opposite corner" -msgstr "圆角矩形 — 单击对角点" +msgstr "圆角矩形：单击对角点" # AI Translated msgid "Rounded rectangle — click to set the corner radius" -msgstr "圆角矩形 — 单击以设置圆角半径" +msgstr "圆角矩形：单击以设置圆角半径" # AI Translated msgid "Circle — click the center" -msgstr "圆 — 单击圆心" +msgstr "圆：单击圆心" # AI Translated msgid "Circle — click to set the radius; it can then be typed" -msgstr "圆 — 单击以设置半径；之后可输入半径值" +msgstr "圆：单击以设置半径；之后可输入半径值" # AI Translated msgid "Circle (2 points) — click one end of the diameter" -msgstr "圆（两点） — 单击直径的一个端点" +msgstr "圆（两点）：单击直径的一个端点" # AI Translated msgid "Circle (2 points) — click the other end of the diameter" -msgstr "圆（两点） — 单击直径的另一个端点" +msgstr "圆（两点）：单击直径的另一个端点" # AI Translated msgid "Circle (3 points) — click the first point on the circle" -msgstr "圆（三点） — 单击圆上的第一个点" +msgstr "圆（三点）：单击圆上的第一个点" # AI Translated msgid "Circle (3 points) — click the second point" -msgstr "圆（三点） — 单击第二个点" +msgstr "圆（三点）：单击第二个点" # AI Translated msgid "Circle (3 points) — click the third point" -msgstr "圆（三点） — 单击第三个点" +msgstr "圆（三点）：单击第三个点" # AI Translated msgid "Arc — click the start point" -msgstr "圆弧 — 单击起点" +msgstr "圆弧：单击起点" # AI Translated msgid "Arc — click the end point" -msgstr "圆弧 — 单击终点" +msgstr "圆弧：单击终点" # AI Translated msgid "Arc — click a point the arc passes through" -msgstr "圆弧 — 单击圆弧经过的一个点" +msgstr "圆弧：单击圆弧经过的一个点" # AI Translated msgid "Tangent arc — click the endpoint it leaves from" -msgstr "切线弧 — 单击其起始端点" +msgstr "切线弧：单击其起始端点" # AI Translated msgid "Tangent arc — click its far end" -msgstr "切线弧 — 单击其另一端" +msgstr "切线弧：单击其另一端" # AI Translated msgid "Center arc — click the center" -msgstr "中心点圆弧 — 单击圆心" +msgstr "中心点圆弧：单击圆心" # AI Translated msgid "Center arc — click the start point (this sets the radius)" -msgstr "中心点圆弧 — 单击起点（以此设置半径）" +msgstr "中心点圆弧：单击起点（以此设置半径）" # AI Translated msgid "Center arc — click the end point" -msgstr "中心点圆弧 — 单击终点" +msgstr "中心点圆弧：单击终点" # AI Translated msgid "Slot — click one end of the centerline" -msgstr "槽口 — 单击中心线的一端" +msgstr "槽口：单击中心线的一端" # AI Translated msgid "Slot — click the other end of the centerline" -msgstr "槽口 — 单击中心线的另一端" +msgstr "槽口：单击中心线的另一端" # AI Translated msgid "Slot — click to set the width" -msgstr "槽口 — 单击以设置宽度" +msgstr "槽口：单击以设置宽度" # AI Translated msgid "Arc slot — click the center the slot curves about" -msgstr "圆弧槽口 — 单击槽口弯曲所绕的中心" +msgstr "圆弧槽口：单击槽口弯曲所绕的中心" # AI Translated msgid "Arc slot — click the start of the centerline (this sets the radius)" -msgstr "圆弧槽口 — 单击中心线的起点（以此设置半径）" +msgstr "圆弧槽口：单击中心线的起点（以此设置半径）" # AI Translated msgid "Arc slot — click the end of the centerline" -msgstr "圆弧槽口 — 单击中心线的终点" +msgstr "圆弧槽口：单击中心线的终点" # AI Translated msgid "Arc slot — click to set the width" -msgstr "圆弧槽口 — 单击以设置宽度" +msgstr "圆弧槽口：单击以设置宽度" # AI Translated msgid "Polygon — click the center" -msgstr "多边形 — 单击中心" +msgstr "多边形：单击中心" # AI Translated msgid "Polygon — click a vertex (this sets size and orientation)" -msgstr "多边形 — 单击一个顶点（以此设置大小和方向）" +msgstr "多边形：单击一个顶点（以此设置大小和方向）" # AI Translated msgid "Ellipse — click the center" -msgstr "椭圆 — 单击中心" +msgstr "椭圆：单击中心" # AI Translated msgid "Ellipse — click the end of the major axis" -msgstr "椭圆 — 单击长轴的端点" +msgstr "椭圆：单击长轴的端点" # AI Translated msgid "Ellipse — click a point on the minor axis" -msgstr "椭圆 — 单击短轴上的一个点" +msgstr "椭圆：单击短轴上的一个点" # AI Translated msgid "Elliptical arc — click the center" -msgstr "椭圆弧 — 单击中心" +msgstr "椭圆弧：单击中心" # AI Translated msgid "Elliptical arc — click the end of the major axis" -msgstr "椭圆弧 — 单击长轴的端点" +msgstr "椭圆弧：单击长轴的端点" # AI Translated msgid "Elliptical arc — click a point on the minor axis" -msgstr "椭圆弧 — 单击短轴上的一个点" +msgstr "椭圆弧：单击短轴上的一个点" # AI Translated msgid "Elliptical arc — click where the arc starts" -msgstr "椭圆弧 — 单击圆弧的起始位置" +msgstr "椭圆弧：单击圆弧的起始位置" # AI Translated msgid "Elliptical arc — click where the arc ends" -msgstr "椭圆弧 — 单击圆弧的结束位置" +msgstr "椭圆弧：单击圆弧的结束位置" # AI Translated msgid "Spline — click the first control point" -msgstr "样条曲线 — 单击第一个控制点" +msgstr "样条曲线：单击第一个控制点" # AI Translated msgid "Spline — click the next control point · right-click, double-click or Enter finishes the curve" -msgstr "样条曲线 — 单击下一个控制点 · 右键单击、双击或按 Enter 完成曲线" +msgstr "样条曲线：单击下一个控制点 · 右键单击、双击或按 Enter 完成曲线" # AI Translated msgid "Point — click to place one; the tool stays armed for more" -msgstr "点 — 单击放置一个点；工具保持激活，可继续放置" +msgstr "点：单击放置一个点；工具保持激活，可继续放置" # AI Translated msgid "Trim — click a segment where it crosses another entity · Esc to exit" -msgstr "修剪 — 单击与其他图元相交的线段 · 按 Esc 退出" +msgstr "修剪：单击与其他图元相交的线段 · 按 Esc 退出" # AI Translated msgid "Extend — click a line or arc to grow it out to the nearest entity · Esc to exit" -msgstr "延伸 — 单击直线或圆弧，将其延长到最近的图元 · 按 Esc 退出" +msgstr "延伸：单击直线或圆弧，将其延长到最近的图元 · 按 Esc 退出" # AI Translated msgid "Fillet — click the first of two lines that meet" -msgstr "圆角 — 单击两条相交直线中的第一条" +msgstr "圆角：单击两条相交直线中的第一条" # AI Translated msgid "Fillet — click the second line" -msgstr "圆角 — 单击第二条直线" +msgstr "圆角：单击第二条直线" # AI Translated msgid "Fillet — drag the arrow, or click the number to type the radius · Enter applies · Esc cancels" -msgstr "圆角 — 拖动箭头，或单击数值输入半径 · 按 Enter 应用 · 按 Esc 取消" +msgstr "圆角：拖动箭头，或单击数值输入半径 · 按 Enter 应用 · 按 Esc 取消" # AI Translated msgid "Chamfer — click the first of two lines that meet" -msgstr "倒角 — 单击两条相交直线中的第一条" +msgstr "倒角：单击两条相交直线中的第一条" # AI Translated msgid "Chamfer — click the second line" -msgstr "倒角 — 单击第二条直线" +msgstr "倒角：单击第二条直线" # AI Translated msgid "Chamfer — drag the arrow, or click the number to type the setback · Enter applies · Esc cancels" -msgstr "倒角 — 拖动箭头，或单击数值输入倒角距离 · 按 Enter 应用 · 按 Esc 取消" +msgstr "倒角：拖动箭头，或单击数值输入倒角距离 · 按 Enter 应用 · 按 Esc 取消" # AI Translated msgid "Offset — click a curve; its whole outline is offset" -msgstr "偏移 — 单击一条曲线；将偏移其整个轮廓" +msgstr "偏移：单击一条曲线；将偏移其整个轮廓" # AI Translated msgid "Offset — drag the arrow to either side, or click the number to type the distance · Enter applies · Esc cancels" -msgstr "偏移 — 向任意一侧拖动箭头，或单击数值输入距离 · 按 Enter 应用 · 按 Esc 取消" +msgstr "偏移：向任意一侧拖动箭头，或单击数值输入距离 · 按 Enter 应用 · 按 Esc 取消" # AI Translated msgid "Mirror — first click the LINE to mirror about (a construction line works)" -msgstr "镜像 — 先单击作为镜像轴的直线（可使用构造线）" +msgstr "镜像：先单击作为镜像轴的直线（可使用构造线）" # AI Translated msgid "Mirror — axis set · now click the entities to mirror · Esc cancels" -msgstr "镜像 — 已设置镜像轴 · 现在单击要镜像的图元 · 按 Esc 取消" +msgstr "镜像：已设置镜像轴 · 现在单击要镜像的图元 · 按 Esc 取消" # AI Translated #, c-format, boost-format msgid "Mirror — axis set · %d to mirror · click another to add or remove it · Enter applies" msgid_plural "Mirror — axis set · %d to mirror · click another to add or remove it · Enter applies" -msgstr[0] "镜像 — 已设置镜像轴 · 待镜像 %d 个 · 单击其他图元可添加或移除 · 按 Enter 应用" +msgstr[0] "镜像：已设置镜像轴 · 待镜像 %d 个 · 单击其他图元可添加或移除 · 按 Enter 应用" # AI Translated msgid "Move — click the entities to move" -msgstr "移动 — 单击要移动的图元" +msgstr "移动：单击要移动的图元" # AI Translated msgid "Move — drag the handle, or click the number to type the distance · Enter applies" -msgstr "移动 — 拖动控制柄，或单击数值输入距离 · 按 Enter 应用" +msgstr "移动：拖动控制柄，或单击数值输入距离 · 按 Enter 应用" # AI Translated msgid "Rotate — click the entities to rotate" -msgstr "旋转 — 单击要旋转的图元" +msgstr "旋转：单击要旋转的图元" # AI Translated msgid "Rotate — drag the handle, or click the number to type the angle · Enter applies" -msgstr "旋转 — 拖动控制柄，或单击数值输入角度 · 按 Enter 应用" +msgstr "旋转：拖动控制柄，或单击数值输入角度 · 按 Enter 应用" # AI Translated msgid "Scale — click the entities to scale" -msgstr "缩放 — 单击要缩放的图元" +msgstr "缩放：单击要缩放的图元" # AI Translated msgid "Scale — drag the handle, or click the number to type the factor · Enter applies" -msgstr "缩放 — 拖动控制柄，或单击数值输入比例因子 · 按 Enter 应用" +msgstr "缩放：拖动控制柄，或单击数值输入比例因子 · 按 Enter 应用" # AI Translated msgid "Array — click the entities to repeat" -msgstr "阵列 — 单击要阵列的图元" +msgstr "阵列：单击要阵列的图元" # AI Translated msgid "Array — drag the handle to set the step, click the count to type it · Enter applies" -msgstr "阵列 — 拖动控制柄设置间距，单击数量值进行输入 · 按 Enter 应用" +msgstr "阵列：拖动控制柄设置间距，单击数量值进行输入 · 按 Enter 应用" # AI Translated msgid "Polar array — click the entities to repeat" -msgstr "圆周阵列 — 单击要阵列的图元" +msgstr "圆周阵列：单击要阵列的图元" # AI Translated msgid "Polar array — drag the handle to set the sweep, click the count to type it · Enter applies" -msgstr "圆周阵列 — 拖动控制柄设置总角度，单击数量值进行输入 · 按 Enter 应用" +msgstr "圆周阵列：拖动控制柄设置总角度，单击数量值进行输入 · 按 Enter 应用" # AI Translated msgid "Drag a corner to scale, the center to move · Enter or ✓ when done, Esc to discard" @@ -27429,12 +28718,12 @@ msgstr " · 单击约束标记可将其移除" # AI Translated #, c-format, boost-format msgid "%s — solid body" -msgstr "%s — 实体" +msgstr "%s（实体）" # AI Translated #, c-format, boost-format msgid "%s — surface body" -msgstr "%s — 曲面实体" +msgstr "%s（曲面实体）" # AI Translated #, c-format, boost-format @@ -27478,7 +28767,7 @@ msgstr "草图轮廓" # AI Translated msgid "Sketch — nothing selected" -msgstr "草图 — 未选择任何内容" +msgstr "草图：未选择任何内容" # AI Translated msgid "Sketch line" @@ -27533,27 +28822,27 @@ msgstr "在视口中单击一条实体边" # AI Translated msgid "An angled plane needs an edge to tilt about — pick Edge A" -msgstr "倾斜平面需要一条作为旋转轴的边 — 请选取边 A" +msgstr "倾斜平面需要一条作为旋转轴的边，请选取边 A" # AI Translated msgid "A midplane needs two faces — pick Face A and Face B" -msgstr "中间平面需要两个面 — 请选取面 A 和面 B" +msgstr "中间平面需要两个面，请选取面 A 和面 B" # AI Translated msgid "Face A and Face B are the same face — a midplane needs two different faces" -msgstr "面 A 和面 B 是同一个面 — 中间平面需要两个不同的面" +msgstr "面 A 和面 B 是同一个面，中间平面需要两个不同的面" # AI Translated msgid "A tangent plane needs a cylindrical face — pick Face A" -msgstr "相切平面需要一个圆柱面 — 请选取面 A" +msgstr "相切平面需要一个圆柱面，请选取面 A" # AI Translated msgid "This plane needs two edges — pick Edge A and Edge B" -msgstr "此平面需要两条边 — 请选取边 A 和边 B" +msgstr "此平面需要两条边，请选取边 A 和边 B" # AI Translated msgid "Plane added — pick it as a sketch plane" -msgstr "已添加平面 — 可将其选作草图平面" +msgstr "已添加平面，可将其选作草图平面" # AI Translated msgid "Axis added" @@ -27565,27 +28854,27 @@ msgstr "已添加坐标系" # AI Translated msgid "Shell needs a solid body — add or import one first" -msgstr "抽壳需要一个实体 — 请先添加或导入实体" +msgstr "抽壳需要一个实体，请先添加或导入实体" # AI Translated msgid "Draft needs a solid body — add or import one first" -msgstr "拔模需要一个实体 — 请先添加或导入实体" +msgstr "拔模需要一个实体，请先添加或导入实体" # AI Translated msgid "Draft needs a picked face — click a side face first" -msgstr "拔模需要选取一个面 — 请先单击一个侧面" +msgstr "拔模需要选取一个面，请先单击一个侧面" # AI Translated msgid "" "Nothing yet — import a STEP or a mesh from the toolbar,\n" "or press Sketch and click a reference plane to start a sketch." msgstr "" -"尚无内容 — 从工具栏导入 STEP 或网格，\n" +"尚无内容：从工具栏导入 STEP 或网格，\n" "或单击“草图”，然后单击一个基准面以开始绘制草图。" # AI Translated msgid "No solid yet — select a sketch and right-click it to Extrude." -msgstr "尚无实体 — 选择一个草图并右键单击它进行拉伸。" +msgstr "尚无实体，请选择一个草图并右键单击它进行拉伸。" # AI Translated msgid "Could not restore the CAD model from this project" @@ -27599,11 +28888,11 @@ msgstr "无法恢复 CAD 模型：%s" # AI Translated #, c-format msgid "Body %zu — %s" -msgstr "实体 %zu — %s" +msgstr "实体 %zu：%s" # AI Translated msgid "Section view on — hides half the model to see inside; PageUp / PageDown move the plane, Flip shows the other half" -msgstr "剖面视图已开启 — 隐藏模型的一半以查看内部；PageUp / PageDown 移动剖切面，“翻转”显示另一半" +msgstr "剖面视图已开启：隐藏模型的一半以查看内部；PageUp / PageDown 移动剖切面，“翻转”显示另一半" # AI Translated msgid "Section view off" @@ -27611,11 +28900,11 @@ msgstr "剖面视图已关闭" # AI Translated msgid "Section view — showing the upper half" -msgstr "剖面视图 — 正在显示上半部分" +msgstr "剖面视图：正在显示上半部分" # AI Translated msgid "Section view — showing the lower half" -msgstr "剖面视图 — 正在显示下半部分" +msgstr "剖面视图：正在显示下半部分" # AI Translated msgid "Finding the feature's faces…" @@ -27623,7 +28912,7 @@ msgstr "正在查找特征的面…" # AI Translated msgid "The model is being rebuilt — zoom again when it finishes" -msgstr "模型正在重建 — 完成后请再次缩放" +msgstr "模型正在重建，完成后请再次缩放" # AI Translated #, c-format, boost-format @@ -27632,7 +28921,7 @@ msgstr "%s 当前没有可供缩放的可见内容" # AI Translated msgid "That body has no display mesh yet — recompute first" -msgstr "该实体尚无显示网格 — 请先重新计算" +msgstr "该实体尚无显示网格，请先重新计算" # AI Translated msgid "Select something to zoom to" @@ -27644,15 +28933,15 @@ msgstr "请先完成或取消当前打开的内容" # AI Translated msgid "Select a body first — click it in the viewport or the Bodies list" -msgstr "请先选择一个实体 — 在视口或实体列表中单击它" +msgstr "请先选择一个实体：在视口或实体列表中单击它" # AI Translated msgid "Drag the arrows to move, the rings to rotate — then Confirm (Esc cancels)" -msgstr "拖动箭头移动，拖动圆环旋转 — 然后单击“确定”（按 Esc 取消）" +msgstr "拖动箭头移动，拖动圆环旋转，然后单击“确定”（按 Esc 取消）" # AI Translated msgid "Drag the arrows to move, the rings to rotate — the numbers follow" -msgstr "拖动箭头移动，拖动圆环旋转 — 数值会随之更新" +msgstr "拖动箭头移动，拖动圆环旋转，数值会随之更新" # AI Translated msgid "Select a body first" @@ -27669,7 +28958,7 @@ msgstr "单击实体上的一个面，然后按 F" # AI Translated msgid "Placed on face — body laid flat on the bed" -msgstr "已放置在面上 — 实体已平放在热床上" +msgstr "已放置在面上，实体已平放在热床上" # AI Translated #, c-format, boost-format @@ -27686,7 +28975,7 @@ msgstr "新建设计" # AI Translated msgid "This body has no feature to delete — use New Design to start over" -msgstr "此实体没有可删除的特征 — 请使用“新建设计”重新开始" +msgstr "此实体没有可删除的特征，请使用“新建设计”重新开始" # AI Translated #, c-format, boost-format @@ -27696,7 +28985,7 @@ msgstr "特征 %d" # AI Translated #, c-format, boost-format msgid "Deleted %s, the feature this body was made from — Ctrl+Z restores it" -msgstr "已删除 %s（即创建此实体的特征） — 按 Ctrl+Z 可恢复" +msgstr "已删除 %s（即创建此实体的特征），按 Ctrl+Z 可恢复" # AI Translated msgid "Select the FEATURE that created this body (or use New Design)" @@ -27818,13 +29107,13 @@ msgstr "约束被拒绝（过约束）" # AI Translated msgid "Applied constraint · its badge is on the sketch — click the badge to remove it" -msgstr "已应用约束 · 其标记显示在草图上 — 单击标记可将其移除" +msgstr "已应用约束 · 其标记显示在草图上，单击标记可将其移除" # AI Translated #, c-format, boost-format msgid "%s — %d selected. Press Esc for the Select tool, click one line, then Shift- or Ctrl-click the other." msgid_plural "%s — %d selected. Press Esc for the Select tool, click one line, then Shift- or Ctrl-click the other." -msgstr[0] "%s — 已选择 %d 个。按 Esc 切换到选择工具，单击一条直线，然后按住 Shift 或 Ctrl 单击另一条。" +msgstr[0] "%s，已选择 %d 个。按 Esc 切换到选择工具，单击一条直线，然后按住 Shift 或 Ctrl 单击另一条。" # AI Translated msgid "Applied constraint" @@ -28034,7 +29323,7 @@ msgstr "已应用编辑" #. TRN Design tab status; %s is the value being asked for, such as "Fillet radius". #, c-format, boost-format msgid "%s — type a value, press Enter (or Confirm)" -msgstr "%s — 输入数值，按 Enter（或单击“确定”）" +msgstr "%s：输入数值，按 Enter（或单击“确定”）" # AI Translated msgid "Pick a segment in the viewport first" @@ -28063,11 +29352,11 @@ msgstr "位于已存储的面上" # AI Translated msgid "Editing sketch — drag a handle or double-click a dimension to edit it" -msgstr "正在编辑草图 — 拖动控制柄或双击尺寸进行编辑" +msgstr "正在编辑草图：拖动控制柄或双击尺寸进行编辑" # AI Translated msgid "An imported solid has no parameters — use Transform to move or rotate it" -msgstr "导入的实体没有参数 — 请使用“变换”来移动或旋转它" +msgstr "导入的实体没有参数，请使用“变换”来移动或旋转它" # AI Translated msgid "This feature type can't be edited yet" @@ -28075,7 +29364,7 @@ msgstr "暂不支持编辑此类特征" # AI Translated msgid "Nothing to export — add a feature first" -msgstr "没有可导出的内容 — 请先添加特征" +msgstr "没有可导出的内容，请先添加特征" # AI Translated msgid "Export STEP" @@ -28096,15 +29385,15 @@ msgstr "STEP 导出失败：%s" # AI Translated msgid "Commit to Plate (as bodies) — send each body to Prepare as its own object" -msgstr "提交到盘（按实体） — 将每个实体作为独立对象发送到“准备”" +msgstr "提交到盘（按实体）：将每个实体作为独立对象发送到“准备”" # AI Translated msgid "Commit to Plate — send the solid to Prepare" -msgstr "提交到盘 — 将实体发送到“准备”" +msgstr "提交到盘：将实体发送到“准备”" # AI Translated msgid "Nothing to commit — add a feature first" -msgstr "没有可提交的内容 — 请先添加特征" +msgstr "没有可提交的内容，请先添加特征" # AI Translated #, c-format, boost-format @@ -28113,7 +29402,7 @@ msgstr "设计实体 %d" # AI Translated msgid "All bodies hidden — show one before committing" -msgstr "所有实体均已隐藏 — 请在提交前显示至少一个实体" +msgstr "所有实体均已隐藏，请在提交前显示至少一个实体" # AI Translated msgid "Design Assembly" @@ -28142,7 +29431,7 @@ msgstr "直线 E%d" # AI Translated #, c-format, boost-format msgid "Sketch plane: %s — pick a tool" -msgstr "草图平面：%s — 请选取工具" +msgstr "草图平面：%s，请选取工具" # AI Translated #, c-format, boost-format @@ -28190,12 +29479,12 @@ msgstr "无效：%s" #, c-format msgid "Preview — %zu triangle" msgid_plural "Preview — %zu triangles" -msgstr[0] "预览 — %zu 个三角形" +msgstr[0] "预览：%zu 个三角形" # AI Translated #, c-format, boost-format msgid "Body %d — moved (%.1f, %.1f, %.1f) mm, rotated %.1f°" -msgstr "实体 %d — 已移动 (%.1f, %.1f, %.1f) mm，已旋转 %.1f°" +msgstr "实体 %d：已移动 (%.1f, %.1f, %.1f) mm，已旋转 %.1f°" # AI Translated msgid "Profile: " @@ -28286,7 +29575,7 @@ msgstr "数值不能为负（零表示重合）" # AI Translated msgid "That dimension cannot be satisfied — the sketch is over-constrained" -msgstr "无法满足该尺寸 — 草图过约束" +msgstr "无法满足该尺寸，草图过约束" # AI Translated #, boost-format @@ -28325,16 +29614,16 @@ msgstr "圆角半径必须小于短边长度的一半" # AI Translated msgid "The slot is too wide for its radius — the width must be less than twice the radius" -msgstr "槽口相对于其半径过宽 — 宽度必须小于半径的两倍" +msgstr "槽口相对于其半径过宽，宽度必须小于半径的两倍" # AI Translated #, boost-format msgid "%1% cannot be satisfied — the sketch is over-constrained" -msgstr "无法满足%1% — 草图过约束" +msgstr "无法满足%1%，草图过约束" # AI Translated msgid "Those two lines do not meet at a corner — pick two lines that do" -msgstr "这两条直线未在角点相交 — 请选取两条在角点相交的直线" +msgstr "这两条直线未在角点相交，请选取两条在角点相交的直线" # AI Translated msgid "The size must be greater than zero" @@ -28356,7 +29645,7 @@ msgstr[0] "已移除 %1% 个因圆角/倒角而失效的约束" # AI Translated msgid "Offset: an ellipse or a spline has no parallel of its own kind — pick lines, arcs or circles" -msgstr "偏移：椭圆或样条曲线无法生成同类型的平行曲线 — 请选取直线、圆弧或圆" +msgstr "偏移：椭圆或样条曲线无法生成同类型的平行曲线，请选取直线、圆弧或圆" # AI Translated msgid "The scale factor must be greater than zero" @@ -28378,7 +29667,7 @@ msgstr[0] "变换解除了 %1% 个约束" # AI Translated msgid "The array copies are unconstrained — the solver refused every binding" -msgstr "阵列副本未受约束 — 求解器拒绝了所有绑定约束" +msgstr "阵列副本未受约束：求解器拒绝了所有绑定约束" # AI Translated msgid "right-click or double-click to finish, click start to close" @@ -28398,7 +29687,7 @@ msgstr "按 Enter 或 ✓ 应用，按 Esc 放弃" # AI Translated msgid "No dimension for that entity yet — click a line, a circle, an arc, or two points" -msgstr "尚不支持为该图元标注尺寸 — 请单击直线、圆、圆弧或两个点" +msgstr "尚不支持为该图元标注尺寸，请单击直线、圆、圆弧或两个点" # AI Translated msgid "Click a second point, or a line to measure the distance to" @@ -28468,16 +29757,16 @@ msgstr "加厚" # AI Translated msgctxt "Design" msgid "Join" -msgstr "并集" +msgstr "合并" # AI Translated msgid "Fuse the tool body into the target — one solid, no seam" -msgstr "将工具实体融合到目标实体中 — 合为一个实体，没有接缝" +msgstr "将工具实体融合到目标实体中，合为一个无接缝的实体" # AI Translated msgctxt "Design" msgid "Subtract" -msgstr "差集" +msgstr "减去" # AI Translated msgid "Cut the tool body out of the target" @@ -28486,7 +29775,7 @@ msgstr "从目标实体中减去工具实体" # AI Translated msgctxt "Design" msgid "Intersect" -msgstr "交集" +msgstr "相交" # AI Translated msgid "Keep only where the two bodies overlap" @@ -28523,7 +29812,7 @@ msgstr "加厚曲面" # AI Translated msgid "Thicken Surface needs a surface body — make one with a Surface tool first" -msgstr "加厚曲面需要一个曲面实体 — 请先使用曲面工具创建" +msgstr "加厚曲面需要一个曲面实体，请先使用曲面工具创建" # AI Translated msgctxt "Design" @@ -28532,7 +29821,7 @@ msgstr "螺纹" # AI Translated msgid "Trim the body with a plane — drag the offset arrow; keep one half or both" -msgstr "用平面切割实体 — 拖动偏移箭头；可保留其中一半或两半" +msgstr "用平面切割实体，拖动偏移箭头；可保留其中一半或两半" # AI Translated msgctxt "Design" @@ -28541,7 +29830,7 @@ msgstr "分割" # AI Translated msgid "Split needs a solid body — add or import one first" -msgstr "分割需要一个实体 — 请先添加或导入实体" +msgstr "分割需要一个实体，请先添加或导入实体" # AI Translated msgid "Split the body along a picked face into two solids" @@ -28589,7 +29878,7 @@ msgstr "偏移曲面" # AI Translated msgid "Surface Offset needs a surface body — make one with a Surface tool first" -msgstr "偏移曲面需要一个曲面实体 — 请先使用曲面工具创建" +msgstr "偏移曲面需要一个曲面实体，请先使用曲面工具创建" # AI Translated msgctxt "Design" @@ -28598,7 +29887,7 @@ msgstr "线性阵列" # AI Translated msgid "Repeat the body along a direction — drag the spacing, set the count" -msgstr "沿某一方向重复实体 — 拖动设置间距，并设置数量" +msgstr "沿某一方向重复实体：拖动设置间距，并设置数量" # AI Translated msgctxt "Design" @@ -28607,7 +29896,7 @@ msgstr "圆周阵列" # AI Translated msgid "Repeat the body around an axis — set the count and sweep" -msgstr "绕轴重复实体 — 设置数量和总角度" +msgstr "绕轴重复实体：设置数量和总角度" # AI Translated msgctxt "Design" @@ -28639,7 +29928,7 @@ msgstr "对齐到" # AI Translated msgid "Align needs a body — add or import one first" -msgstr "对齐需要一个实体 — 请先添加或导入实体" +msgstr "对齐需要一个实体，请先添加或导入实体" # AI Translated msgid "Align the body to a picked face or plane" @@ -28685,7 +29974,7 @@ msgstr "干涉" # AI Translated msgid "Check whether two bodies overlap — reports, changes nothing" -msgstr "检查两个实体是否重叠 — 仅报告，不做任何更改" +msgstr "检查两个实体是否重叠（仅报告，不做任何更改）" # AI Translated msgctxt "Design" @@ -28748,7 +30037,7 @@ msgstr "删除实体" # AI Translated msgid "Delete this whole body — removes the feature it was made from" -msgstr "删除整个实体 — 将移除创建它的特征" +msgstr "删除整个实体，并移除创建它的特征" # AI Translated msgctxt "Design" @@ -28841,7 +30130,7 @@ msgstr "三角形" # AI Translated msgid "Triangle — click center, then a vertex" -msgstr "三角形 — 单击中心，然后单击一个顶点" +msgstr "三角形：单击中心，然后单击一个顶点" # AI Translated msgctxt "Design" @@ -28850,7 +30139,7 @@ msgstr "正方形" # AI Translated msgid "Square — click center, then a vertex" -msgstr "正方形 — 单击中心，然后单击一个顶点" +msgstr "正方形：单击中心，然后单击一个顶点" # AI Translated msgctxt "Design" @@ -28859,7 +30148,7 @@ msgstr "五边形" # AI Translated msgid "Pentagon — click center, then a vertex" -msgstr "五边形 — 单击中心，然后单击一个顶点" +msgstr "五边形：单击中心，然后单击一个顶点" # AI Translated msgctxt "Design" @@ -28868,7 +30157,7 @@ msgstr "六边形" # AI Translated msgid "Hexagon — click center, then a vertex" -msgstr "六边形 — 单击中心，然后单击一个顶点" +msgstr "六边形：单击中心，然后单击一个顶点" # AI Translated msgctxt "Design" @@ -28877,7 +30166,7 @@ msgstr "八边形" # AI Translated msgid "Octagon — click center, then a vertex" -msgstr "八边形 — 单击中心，然后单击一个顶点" +msgstr "八边形：单击中心，然后单击一个顶点" # AI Translated msgctxt "Design" @@ -28886,7 +30175,7 @@ msgstr "十二边形" # AI Translated msgid "Dodecagon — click center, then a vertex" -msgstr "十二边形 — 单击中心，然后单击一个顶点" +msgstr "十二边形：单击中心，然后单击一个顶点" # AI Translated msgctxt "Design" @@ -28988,7 +30277,7 @@ msgstr "选择一个草图以添加约束" # AI Translated msgid "Add dimensions and relations (coincident, tangent, parallel...) to the selected sketch" -msgstr "为所选草图添加尺寸和几何关系（重合、相切、平行...）" +msgstr "为所选草图添加尺寸和几何关系（重合、相切、平行等）" # AI Translated msgctxt "Design" @@ -29049,7 +30338,7 @@ msgstr "斜体" # AI Translated msgid "This font cannot be used for text — pick another one" -msgstr "此字体无法用于文字 — 请选择其他字体" +msgstr "此字体无法用于文字，请选择其他字体" # AI Translated msgid "Type the text to see its size" @@ -29174,8 +30463,9 @@ msgstr "网格布尔运算小工具" msgid "Gizmo FDM paint-on supports" msgstr "FDM 手绘支撑小工具" +# AI Translated msgid "Gizmo FDM paint-on seam" -msgstr "FDM涂装接缝" +msgstr "FDM 手绘接缝小工具" # AI Translated msgid "Gizmo FDM paint-on fuzzy skin" @@ -29199,7 +30489,7 @@ msgstr "装配小工具" # AI Translated msgid "Gizmo brim ears" -msgstr "耳状帽檐小工具" +msgstr "耳状 Brim 小工具" # AI Translated msgid "Gizmo texture displacement painting" @@ -29217,11 +30507,13 @@ msgstr "水平滑动条 - 向左移动一步" msgid "Horizontal slider - Move active thumb Right" msgstr "水平滑动条 - 向右移动一步" +# AI Translated msgid "Horizontal slider - Move to start position" -msgstr "水平滑块 - 移动到起始位置" +msgstr "水平滑动条 - 移动到起始位置" +# AI Translated msgid "Horizontal slider - Move to last position" -msgstr "水平滑块 - 移动到末尾位置" +msgstr "水平滑动条 - 移动到末尾位置" # AI Translated msgid "Camera view - Default" @@ -29274,8 +30566,9 @@ msgstr "开启/关闭G-code窗口" msgid "On/Off one layer mode of the vertical slider" msgstr "开启/关闭垂直滑动条的单层模式" +# AI Translated msgid "Switch between Prepare/Preview" -msgstr "准备/预览之间的切换" +msgstr "在“准备”和“预览”之间切换" msgid "Collapse/Expand the sidebar" msgstr "收起/展开 侧边栏" @@ -29413,7 +30706,7 @@ msgstr "配合需要两个不同的连接器" # AI Translated msgid "connector B is not attached to a body — a mate moves B's body" -msgstr "连接器 B 未附着到实体 — 配合会移动 B 所在的实体" +msgstr "连接器 B 未附着到实体，而配合需要移动 B 所在的实体" # AI Translated msgid "connector B's body no longer exists" @@ -29421,30 +30714,30 @@ msgstr "连接器 B 所在的实体已不存在" # AI Translated msgid "needs a flat face at both ends — both connectors are on curved faces" -msgstr "两端都需要平面 — 两个连接器都位于曲面上" +msgstr "两端都需要平面，但两个连接器都位于曲面上" # AI Translated #, boost-format msgid "needs a flat face at both ends — connector %1% is on a curved face" -msgstr "两端都需要平面 — 连接器 %1% 位于曲面上" +msgstr "两端都需要平面，但连接器 %1% 位于曲面上" # AI Translated msgid "needs a cylindrical face at both ends — both connectors are on flat faces" -msgstr "两端都需要圆柱面 — 两个连接器都位于平面上" +msgstr "两端都需要圆柱面，但两个连接器都位于平面上" # AI Translated msgid "needs a cylindrical face at both ends — both connectors are on non-cylindrical faces" -msgstr "两端都需要圆柱面 — 两个连接器都位于非圆柱面上" +msgstr "两端都需要圆柱面，但两个连接器都位于非圆柱面上" # AI Translated #, boost-format msgid "needs a cylindrical face at both ends — connector %1% is on a flat face" -msgstr "两端都需要圆柱面 — 连接器 %1% 位于平面上" +msgstr "两端都需要圆柱面，但连接器 %1% 位于平面上" # AI Translated #, boost-format msgid "needs a cylindrical face at both ends — connector %1% is on a curved face" -msgstr "两端都需要圆柱面 — 连接器 %1% 位于曲面上" +msgstr "两端都需要圆柱面，但连接器 %1% 位于曲面上" # AI Translated #. TRN Datum plane entry in the reference plane list. %1% is the plane name. @@ -29470,7 +30763,7 @@ msgstr "未找到边" # AI Translated msgid "plane ref not found" -msgstr "未找到参考平面" +msgstr "未找到基准面" # AI Translated msgid "planes are parallel (no intersection)" @@ -29522,7 +30815,7 @@ msgstr "未显示的开放端点：%1%" # AI Translated msgid "revolve: the axis line is no longer in the sketch — pick the axis again" -msgstr "旋转：轴线已不在草图中 — 请重新选取轴" +msgstr "旋转：轴线已不在草图中，请重新选取轴" # AI Translated msgid "revolve: the axis line has no length" @@ -29530,7 +30823,7 @@ msgstr "旋转：轴线没有长度" # AI Translated msgid "sketch has entities but they do not form a single closed wire — a closed entity (circle/ellipse) combined with other entities, or several closed entities, is not supported yet" -msgstr "草图包含图元，但未构成单一闭合轮廓 — 暂不支持将闭合图元（圆/椭圆）与其他图元组合，或使用多个闭合图元" +msgstr "草图包含图元，但未构成单一闭合轮廓；暂不支持将闭合图元（圆/椭圆）与其他图元组合，或使用多个闭合图元" # AI Translated msgid "sketch profile wire failed" @@ -29764,7 +31057,7 @@ msgstr "布尔：没有目标实体" # AI Translated msgid "boolean: no tool body — pick a second body" -msgstr "布尔：没有工具实体 — 请选取第二个实体" +msgstr "布尔：没有工具实体，请选取第二个实体" # AI Translated msgid "boolean: the target and the tool are the same body" @@ -29947,7 +31240,7 @@ msgstr "此配合将实体 %1% 相对于其自身定位" # AI Translated #, boost-format msgid "Mate chain is circular: Body %1% depends on Body %2%, which leads back to Body %1% — the result depends on feature order" -msgstr "配合链存在循环：实体 %1% 依赖于实体 %2%，而后者又回到实体 %1% — 结果取决于特征顺序" +msgstr "配合链存在循环：实体 %1% 依赖于实体 %2%，而后者又回到实体 %1%，因此结果取决于特征顺序" # AI Translated #, boost-format @@ -29964,15 +31257,15 @@ msgstr "该特征需要一个实体" # AI Translated msgid "hole removed no material — the tool does not intersect the target body (coordinates are in the sketch plane's frame, not world)" -msgstr "孔未去除任何材料 — 工具未与目标实体相交（坐标位于草图平面的坐标系中，而非世界坐标系）" +msgstr "孔未去除任何材料：工具未与目标实体相交（坐标位于草图平面的坐标系中，而非世界坐标系）" # AI Translated msgid "thread removed no material — the tool does not intersect the target body (coordinates are in the sketch plane's frame, not world)" -msgstr "螺纹未去除任何材料 — 工具未与目标实体相交（坐标位于草图平面的坐标系中，而非世界坐标系）" +msgstr "螺纹未去除任何材料：工具未与目标实体相交（坐标位于草图平面的坐标系中，而非世界坐标系）" # AI Translated msgid "cut removed no material — the tool does not intersect the target body (coordinates are in the sketch plane's frame, not world)" -msgstr "切割未去除任何材料 — 工具未与目标实体相交（坐标位于草图平面的坐标系中，而非世界坐标系）" +msgstr "切割未去除任何材料：工具未与目标实体相交（坐标位于草图平面的坐标系中，而非世界坐标系）" # AI Translated msgid "OCCT operation failed" @@ -30090,8 +31383,9 @@ msgstr "了解耗材丝匹配规则。" msgid "External spools are not supported since Filament Track Switch has been installed. If you want to use an external spool, please uninstall it." msgstr "由于已安装耗材变轨器，不支持使用外置料盘。如需使用外置料盘，请将其卸载。" +# AI Translated msgid "Select Filament && Hotends" -msgstr "选择材料预设和喷嘴" +msgstr "选择耗材丝和热端" # AI Translated msgid "Model Pictures" @@ -30195,1231 +31489,1639 @@ msgid "The current filament list does not contain %s. A project filament require msgid_plural "The current filament list does not contain %s. Project filaments required by the mixed filament will be created automatically after decomposition." msgstr[0] "当前耗材丝列表中不包含 %s。分解后将自动创建混合耗材丝所需的项目耗材丝。" +# AI Translated msgid "Color Picker" -msgstr "" +msgstr "颜色选择器" +# AI Translated msgid "Basic Colors" -msgstr "" +msgstr "基本颜色" +# AI Translated msgid "Orca Palette" -msgstr "" +msgstr "Orca 调色板" +# AI Translated #. TRN: Keep the brand name "Orca" unchanged; translate only the palette descriptor. msgid "RAL Classic" -msgstr "" +msgstr "RAL 经典色" +# AI Translated #. TRN: Keep the standard/brand name "RAL" unchanged. msgid "Gradients" -msgstr "" +msgstr "渐变预设" +# AI Translated msgid "Solid" -msgstr "" +msgstr "纯色" +# AI Translated msgid "Gradient" -msgstr "" +msgstr "渐变" +# AI Translated msgid "Gradient start" -msgstr "" +msgstr "渐变起点" +# AI Translated msgid "Gradient end" -msgstr "" +msgstr "渐变终点" +# AI Translated msgid "Gradient color" -msgstr "" +msgstr "渐变色" +# AI Translated msgid "Add color" -msgstr "" +msgstr "添加颜色" +# AI Translated msgid "Remove color" -msgstr "" +msgstr "移除颜色" +# AI Translated msgid "Saturation" -msgstr "" +msgstr "饱和度" +# AI Translated msgid "Original color" -msgstr "" +msgstr "原始颜色" +# AI Translated #. TRN: Clicking the current color preview adds it to the saved favorites. msgid "Save current color" -msgstr "" +msgstr "保存当前颜色" +# AI Translated msgid "Palettes" -msgstr "" +msgstr "调色板" +# AI Translated msgid "Search colors" -msgstr "" +msgstr "搜索颜色" +# AI Translated msgid "Filter colors" -msgstr "" +msgstr "筛选颜色" +# AI Translated msgid "No matching colors" -msgstr "" +msgstr "没有匹配的颜色" +# AI Translated msgid "Hex color" -msgstr "" +msgstr "十六进制颜色" # AI Translated msgid "Opacity" msgstr "不透明度" +# AI Translated msgid "Opacity percent" -msgstr "" +msgstr "不透明度百分比" +# AI Translated msgid "Save color" -msgstr "" +msgstr "保存颜色" +# AI Translated msgid "Enter a complete hexadecimal color" -msgstr "" +msgstr "请输入完整的十六进制颜色值" +# AI Translated msgid "The current multi-color selection is kept until you choose a different color." -msgstr "" +msgstr "当前的多色选择会一直保留，直到您选择其他颜色。" +# AI Translated #, c-format, boost-format msgid "Up to %d colors supported." -msgstr "" +msgstr "最多支持 %d 种颜色。" +# AI Translated msgid "Crimson" -msgstr "" +msgstr "猩红色" +# AI Translated msgid "Orange red" -msgstr "" +msgstr "橙红色" +# AI Translated msgid "Tomato" -msgstr "" +msgstr "番茄色" +# AI Translated msgid "Orange" -msgstr "" +msgstr "橙色" +# AI Translated msgid "Dark orange" -msgstr "" +msgstr "暗橙色" +# AI Translated msgid "Gold" -msgstr "" +msgstr "金色" +# AI Translated msgid "Burly wood" -msgstr "" +msgstr "硬木色" +# AI Translated msgid "Bisque" -msgstr "" +msgstr "陶坯黄" +# AI Translated msgid "Misty rose" -msgstr "" +msgstr "薄雾玫瑰色" +# AI Translated msgid "Light yellow" -msgstr "" +msgstr "浅黄色" +# AI Translated msgid "Lemon chiffon" -msgstr "" +msgstr "柠檬绸色" +# AI Translated msgid "Beige" -msgstr "" +msgstr "米色" +# AI Translated msgid "Light golden rod yellow" -msgstr "" +msgstr "浅金菊黄" +# AI Translated msgid "Pale golden rod" -msgstr "" +msgstr "灰金菊黄" +# AI Translated msgid "Khaki" -msgstr "" +msgstr "卡其色" +# AI Translated msgid "Dark khaki" -msgstr "" +msgstr "深卡其色" +# AI Translated msgid "Peach puff" -msgstr "" +msgstr "桃肉色" +# AI Translated msgid "Moccasin" -msgstr "" +msgstr "鹿皮色" +# AI Translated msgid "Papaya whip" -msgstr "" +msgstr "番木瓜色" +# AI Translated msgid "Blanched almond" -msgstr "" +msgstr "杏仁白" +# AI Translated msgid "Antique white" -msgstr "" +msgstr "古董白" +# AI Translated msgid "Navajo white" -msgstr "" +msgstr "纳瓦白" +# AI Translated msgid "Wheat" -msgstr "" +msgstr "小麦色" +# AI Translated msgid "Golden rod" -msgstr "" +msgstr "金菊黄" +# AI Translated msgid "Chocolate" -msgstr "" +msgstr "巧克力色" +# AI Translated msgid "Peru" -msgstr "" +msgstr "秘鲁色" +# AI Translated msgid "Fire brick" -msgstr "" +msgstr "耐火砖红" +# AI Translated msgid "Sienna" -msgstr "" +msgstr "赭色" +# AI Translated msgid "Saddle brown" -msgstr "" +msgstr "马鞍棕" +# AI Translated msgid "Brown" -msgstr "" +msgstr "棕色" +# AI Translated msgid "Rosy brown" -msgstr "" +msgstr "玫瑰棕" +# AI Translated msgid "Salmon" -msgstr "" +msgstr "鲑红色" +# AI Translated msgid "Light salmon" -msgstr "" +msgstr "浅鲑红" +# AI Translated msgid "Dark salmon" -msgstr "" +msgstr "深鲑红" +# AI Translated msgid "Sandy brown" -msgstr "" +msgstr "沙棕色" +# AI Translated msgid "Coral" -msgstr "" +msgstr "珊瑚色" +# AI Translated msgid "Light coral" -msgstr "" +msgstr "浅珊瑚色" +# AI Translated msgid "Indian red" -msgstr "" +msgstr "印度红" +# AI Translated msgid "Dark red" -msgstr "" +msgstr "深红色" +# AI Translated msgid "Maroon" -msgstr "" +msgstr "栗色" +# AI Translated msgid "Green yellow" -msgstr "" +msgstr "绿黄色" +# AI Translated msgid "Yellow green" -msgstr "" +msgstr "黄绿色" +# AI Translated msgid "Chartreuse" -msgstr "" +msgstr "查特酒绿" +# AI Translated msgid "Lawn green" -msgstr "" +msgstr "草坪绿" +# AI Translated msgid "Lime green" -msgstr "" +msgstr "青柠绿" +# AI Translated msgid "Spring green" -msgstr "" +msgstr "春绿色" +# AI Translated msgid "Medium spring green" -msgstr "" +msgstr "中春绿色" +# AI Translated msgid "Lime" -msgstr "" +msgstr "青柠色" +# AI Translated msgid "Forest green" -msgstr "" +msgstr "森林绿" +# AI Translated msgid "Dark green" -msgstr "" +msgstr "深绿色" +# AI Translated msgid "Olive drab" -msgstr "" +msgstr "橄榄褐" +# AI Translated msgid "Olive" -msgstr "" +msgstr "橄榄色" +# AI Translated msgid "Dark olive green" -msgstr "" +msgstr "深橄榄绿" +# AI Translated msgid "Pale green" -msgstr "" +msgstr "淡绿色" +# AI Translated msgid "Light green" -msgstr "" +msgstr "浅绿色" +# AI Translated msgid "Medium sea green" -msgstr "" +msgstr "中海绿" +# AI Translated msgid "Sea green" -msgstr "" +msgstr "海绿色" +# AI Translated msgid "Dark sea green" -msgstr "" +msgstr "深海绿" +# AI Translated msgid "Cadet blue" -msgstr "" +msgstr "军校蓝" +# AI Translated msgid "Medium aqua marine" -msgstr "" +msgstr "中碧绿色" +# AI Translated msgid "Turquoise" -msgstr "" +msgstr "绿松石色" +# AI Translated msgid "Medium turquoise" -msgstr "" +msgstr "中绿松石色" +# AI Translated msgid "Dark turquoise" -msgstr "" +msgstr "深绿松石色" +# AI Translated msgid "Pale turquoise" -msgstr "" +msgstr "浅绿松石色" +# AI Translated msgid "Aqua" -msgstr "" +msgstr "水绿色" +# AI Translated msgid "Light cyan" -msgstr "" +msgstr "浅青色" +# AI Translated msgid "Mint cream" -msgstr "" +msgstr "薄荷奶油色" +# AI Translated msgid "Honey dew" -msgstr "" +msgstr "蜜瓜色" +# AI Translated msgid "Aquamarine" -msgstr "" +msgstr "碧绿色" +# AI Translated msgid "Light sea green" -msgstr "" +msgstr "浅海绿" +# AI Translated msgid "Dark cyan" -msgstr "" +msgstr "深青色" +# AI Translated msgid "Teal" -msgstr "" +msgstr "水鸭色" +# AI Translated msgid "Dark slate gray" -msgstr "" +msgstr "深石板灰" +# AI Translated msgid "Light slate gray" -msgstr "" +msgstr "浅石板灰" +# AI Translated msgid "Slate gray" -msgstr "" +msgstr "石板灰" +# AI Translated msgid "Deep sky blue" -msgstr "" +msgstr "深天蓝" +# AI Translated msgid "Dodger Blue" -msgstr "" +msgstr "道奇蓝" +# AI Translated msgid "Sky blue" -msgstr "" +msgstr "天蓝色" +# AI Translated msgid "Light sky blue" -msgstr "" +msgstr "浅天蓝" +# AI Translated msgid "Light blue" -msgstr "" +msgstr "浅蓝色" +# AI Translated msgid "Powder blue" -msgstr "" +msgstr "粉蓝色" +# AI Translated msgid "Light steel blue" -msgstr "" +msgstr "浅钢蓝" +# AI Translated msgid "Steel blue" -msgstr "" +msgstr "钢蓝色" +# AI Translated msgid "Cornflower blue" -msgstr "" +msgstr "矢车菊蓝" +# AI Translated msgid "Royal blue" -msgstr "" +msgstr "宝蓝色" +# AI Translated msgid "Medium blue" -msgstr "" +msgstr "中蓝色" +# AI Translated msgid "Midnight blue" -msgstr "" +msgstr "午夜蓝" +# AI Translated msgid "Dark blue" -msgstr "" +msgstr "深蓝色" +# AI Translated msgid "Navy" -msgstr "" +msgstr "海军蓝" +# AI Translated msgid "Slate blue" -msgstr "" +msgstr "石板蓝" +# AI Translated msgid "Dark slate blue" -msgstr "" +msgstr "深石板蓝" +# AI Translated msgid "Medium slate blue" -msgstr "" +msgstr "中石板蓝" +# AI Translated msgid "Blue violet" -msgstr "" +msgstr "蓝紫色" +# AI Translated msgid "Indigo" -msgstr "" +msgstr "靛青色" +# AI Translated msgid "Dark violet" -msgstr "" +msgstr "深紫罗兰色" +# AI Translated msgid "Dark orchid" -msgstr "" +msgstr "深兰花紫" +# AI Translated msgid "Medium orchid" -msgstr "" +msgstr "中兰花紫" +# AI Translated msgid "Orchid" -msgstr "" +msgstr "兰花紫" +# AI Translated msgid "Violet" -msgstr "" +msgstr "紫罗兰色" +# AI Translated msgid "Medium purple" -msgstr "" +msgstr "中紫色" +# AI Translated msgid "Purple" -msgstr "" +msgstr "紫色" +# AI Translated msgid "Rebecca purple" -msgstr "" +msgstr "丽贝卡紫" +# AI Translated msgid "Medium violet red" -msgstr "" +msgstr "中紫罗兰红" +# AI Translated msgid "PaleV violet red" -msgstr "" +msgstr "浅紫罗兰红" +# AI Translated msgid "Deep pink" -msgstr "" +msgstr "深粉色" +# AI Translated msgid "Hot pink" -msgstr "" +msgstr "艳粉色" +# AI Translated msgid "Light pink" -msgstr "" +msgstr "浅粉色" +# AI Translated msgid "Pink" -msgstr "" +msgstr "粉色" +# AI Translated msgid "Plum" -msgstr "" +msgstr "梅红色" +# AI Translated msgid "Thistle" -msgstr "" +msgstr "蓟色" +# AI Translated msgid "Fuchsia" -msgstr "" +msgstr "洋红色" +# AI Translated msgid "Dark magenta" -msgstr "" +msgstr "深品红" +# AI Translated msgid "Linen" -msgstr "" +msgstr "亚麻色" +# AI Translated msgid "Old lace" -msgstr "" +msgstr "旧蕾丝色" +# AI Translated msgid "Sea shell" -msgstr "" +msgstr "海贝色" +# AI Translated msgid "Ivory" -msgstr "" +msgstr "象牙色" +# AI Translated msgid "Floral white" -msgstr "" +msgstr "花白色" +# AI Translated msgid "Lavender blush" -msgstr "" +msgstr "薰衣草紫红" +# AI Translated msgid "Ghost white" -msgstr "" +msgstr "幽灵白" +# AI Translated msgid "Alice blue" -msgstr "" +msgstr "爱丽丝蓝" +# AI Translated msgid "Lavender" -msgstr "" +msgstr "薰衣草紫" +# AI Translated msgid "White smoke" -msgstr "" +msgstr "白烟色" +# AI Translated msgid "Gainsboro" -msgstr "" +msgstr "庚斯博罗灰" +# AI Translated msgid "Black" -msgstr "" +msgstr "黑色" +# AI Translated msgid "Coral fire" -msgstr "" +msgstr "珊瑚火红" +# AI Translated msgid "Sea anemone" -msgstr "" +msgstr "海葵" +# AI Translated msgid "Deep abyss" -msgstr "" +msgstr "深渊" +# AI Translated msgid "Lobster red" -msgstr "" +msgstr "龙虾红" +# AI Translated msgid "Sandy clay" -msgstr "" +msgstr "沙黏土" +# AI Translated msgid "Driftwood" -msgstr "" +msgstr "浮木" +# AI Translated msgid "Sea buckthorn" -msgstr "" +msgstr "沙棘" +# AI Translated msgid "Sunset reef" -msgstr "" +msgstr "日落礁" +# AI Translated msgid "Tiger coral" -msgstr "" +msgstr "虎纹珊瑚" +# AI Translated msgid "Pink coral" -msgstr "" +msgstr "粉珊瑚" +# AI Translated msgid "Seashell glow" -msgstr "" +msgstr "贝壳微光" +# AI Translated msgid "Sand" -msgstr "" +msgstr "沙色" +# AI Translated msgid "Golden kelp" -msgstr "" +msgstr "金色海藻" +# AI Translated msgid "Sunlit dune" -msgstr "" +msgstr "阳光沙丘" +# AI Translated msgid "Amber nautilus" -msgstr "" +msgstr "琥珀鹦鹉螺" +# AI Translated msgid "Sea lemon" -msgstr "" +msgstr "海柠檬" +# AI Translated msgid "Pale starfish" -msgstr "" +msgstr "浅色海星" +# AI Translated msgid "Spring tide" -msgstr "" +msgstr "春潮" +# AI Translated msgid "Lime algae" -msgstr "" +msgstr "青柠藻" +# AI Translated msgid "Sea grass" -msgstr "" +msgstr "海草" +# AI Translated msgid "Neon plankton" -msgstr "" +msgstr "霓虹浮游生物" +# AI Translated msgid "Kelp forest" -msgstr "" +msgstr "海藻森林" +# AI Translated msgid "Emerald wave" -msgstr "" +msgstr "翡翠浪" +# AI Translated msgid "Whale shadow" -msgstr "" +msgstr "鲸影" +# AI Translated msgid "Sea turtle" -msgstr "" +msgstr "海龟" +# AI Translated msgid "Lagoon" -msgstr "" +msgstr "泻湖" +# AI Translated msgid "Tropical current" -msgstr "" +msgstr "热带洋流" +# AI Translated msgid "Midnight trench" -msgstr "" +msgstr "午夜海沟" +# AI Translated msgid "Dark kelp" -msgstr "" +msgstr "暗海藻" +# AI Translated msgid "Crystal surf" -msgstr "" +msgstr "水晶浪花" +# AI Translated msgid "Turquoise bay" -msgstr "" +msgstr "绿松石湾" +# AI Translated msgid "Sky over reef" -msgstr "" +msgstr "礁上天空" +# AI Translated msgid "Shallow sky" -msgstr "" +msgstr "浅空" +# AI Translated +# Needs human review: The English “Electric bel” looks like a typo (Electric blue? Electric eel?); the color is #1E90FF, so 电光蓝 was chosen. Recheck once the source name is fixed. msgid "Electric bel" -msgstr "" +msgstr "电光蓝" +# AI Translated msgid "Dolphin" -msgstr "" +msgstr "海豚" +# AI Translated msgid "Ocean depths" -msgstr "" +msgstr "深海" +# AI Translated msgid "Whale" -msgstr "" +msgstr "鲸" +# AI Translated msgid "Indigo abyss" -msgstr "" +msgstr "靛蓝深渊" +# AI Translated msgid "Sea urchin" -msgstr "" +msgstr "海胆" +# AI Translated msgid "Lavender coral" -msgstr "" +msgstr "薰衣草珊瑚" +# AI Translated msgid "Violet tide" -msgstr "" +msgstr "紫潮" +# AI Translated msgid "Deep sea orchid" -msgstr "" +msgstr "深海兰花" +# AI Translated msgid "Neon jelly" -msgstr "" +msgstr "霓虹水母" +# AI Translated msgid "Fuchsia coral" -msgstr "" +msgstr "洋红珊瑚" +# AI Translated msgid "Pink jellyfish" -msgstr "" +msgstr "粉色水母" +# AI Translated msgid "Foam" -msgstr "" +msgstr "海沫" +# AI Translated msgid "Seashell white" -msgstr "" +msgstr "贝壳白" +# AI Translated msgid "Pebble gray" -msgstr "" +msgstr "卵石灰" +# AI Translated msgid "Storm cloud" -msgstr "" +msgstr "风暴云" +# AI Translated msgid "Ink black" -msgstr "" +msgstr "墨黑" +# AI Translated msgid "Green beige" -msgstr "" +msgstr "绿米色" +# AI Translated msgid "Sand yellow" -msgstr "" +msgstr "沙黄色" +# AI Translated msgid "Signal yellow" -msgstr "" +msgstr "信号黄" +# AI Translated msgid "Golden yellow" -msgstr "" +msgstr "金黄色" +# AI Translated msgid "Honey yellow" -msgstr "" +msgstr "蜂蜜黄" +# AI Translated msgid "Maize yellow" -msgstr "" +msgstr "玉米黄" +# AI Translated +# Needs human review: RAL 1007 is “Daffodil yellow” (水仙黄); the English name in the palette looks wrong. Recheck once the source name is fixed. msgid "Dalmatian yellow" -msgstr "" +msgstr "达尔马提亚黄" +# AI Translated msgid "Brown beige" -msgstr "" +msgstr "棕米色" +# AI Translated msgid "Lemon yellow" -msgstr "" +msgstr "柠檬黄" +# AI Translated msgid "Oyster white" -msgstr "" +msgstr "牡蛎白" +# AI Translated msgid "Light ivory" -msgstr "" +msgstr "浅象牙色" +# AI Translated msgid "Zinc yellow" -msgstr "" +msgstr "锌黄" +# AI Translated msgid "Grey beige" -msgstr "" +msgstr "灰米色" +# AI Translated msgid "Olive yellow" -msgstr "" +msgstr "橄榄黄" +# AI Translated msgid "Rape yellow" -msgstr "" +msgstr "油菜黄" +# AI Translated msgid "Traffic yellow" -msgstr "" +msgstr "交通黄" +# AI Translated msgid "Ochre yellow" -msgstr "" +msgstr "赭黄" +# AI Translated msgid "Traffic orange yellow" -msgstr "" +msgstr "交通橙黄" +# AI Translated msgid "Curry" -msgstr "" +msgstr "咖喱色" +# AI Translated msgid "Melon yellow" -msgstr "" +msgstr "瓜黄" +# AI Translated msgid "Broom yellow" -msgstr "" +msgstr "金雀花黄" +# AI Translated msgid "Dahlia yellow" -msgstr "" +msgstr "大丽花黄" +# AI Translated msgid "Pastel yellow" -msgstr "" +msgstr "粉彩黄" +# AI Translated msgid "Pearl beige" -msgstr "" +msgstr "珍珠米色" +# AI Translated msgid "Pearl gold" -msgstr "" +msgstr "珍珠金" +# AI Translated msgid "Sun yellow" -msgstr "" +msgstr "阳光黄" +# AI Translated msgid "Yellow orange" -msgstr "" +msgstr "黄橙色" +# AI Translated msgid "Deep orange" -msgstr "" +msgstr "深橙色" +# AI Translated msgid "Vermilion" -msgstr "" +msgstr "朱红色" +# AI Translated msgid "Pearl orange" -msgstr "" +msgstr "珍珠橙" +# AI Translated msgid "Pure orange" -msgstr "" +msgstr "纯橙色" +# AI Translated msgid "Luminous orange" -msgstr "" +msgstr "荧光橙" +# AI Translated msgid "Luminous bright orange" -msgstr "" +msgstr "荧光亮橙" +# AI Translated msgid "Bright red orange" -msgstr "" +msgstr "亮红橙" +# AI Translated msgid "Traffic orange" -msgstr "" +msgstr "交通橙" +# AI Translated msgid "Signal orange" -msgstr "" +msgstr "信号橙" +# AI Translated msgid "Salmon orange" -msgstr "" +msgstr "鲑鱼橙" +# AI Translated msgid "Pearl pink" -msgstr "" +msgstr "珍珠粉" +# AI Translated msgid "Copper orange" -msgstr "" +msgstr "铜橙色" +# AI Translated msgid "Signal brown" -msgstr "" +msgstr "信号棕" +# AI Translated msgid "Fir orange" -msgstr "" +msgstr "冷杉橙" +# AI Translated msgid "Signal red" -msgstr "" +msgstr "信号红" +# AI Translated msgid "Luminous red" -msgstr "" +msgstr "荧光红" +# AI Translated msgid "Carmine red" -msgstr "" +msgstr "胭脂红" +# AI Translated msgid "Pearl carmine red" -msgstr "" +msgstr "珍珠胭脂红" +# AI Translated msgid "Pure red" -msgstr "" +msgstr "纯红色" +# AI Translated msgid "Luminous deep red" -msgstr "" +msgstr "荧光深红" +# AI Translated msgid "Currant red" -msgstr "" +msgstr "醋栗红" +# AI Translated msgid "Pearl ruby red" -msgstr "" +msgstr "珍珠宝石红" +# AI Translated msgid "Fire red" -msgstr "" +msgstr "火焰红" +# AI Translated msgid "Ruby red" -msgstr "" +msgstr "宝石红" +# AI Translated msgid "Purple red" -msgstr "" +msgstr "紫红色" +# AI Translated msgid "Wine red" -msgstr "" +msgstr "酒红色" +# AI Translated msgid "Black red" -msgstr "" +msgstr "黑红色" +# AI Translated msgid "Oxide red" -msgstr "" +msgstr "氧化红" +# AI Translated msgid "Brown red" -msgstr "" +msgstr "棕红色" +# AI Translated msgid "Pine red" -msgstr "" +msgstr "松木红" +# AI Translated msgid "Tomato red" -msgstr "" +msgstr "番茄红" +# AI Translated msgid "Antique pink" -msgstr "" +msgstr "古典粉" +# AI Translated msgid "Coral red" -msgstr "" +msgstr "珊瑚红" +# AI Translated msgid "Rose" -msgstr "" +msgstr "玫瑰红" +# AI Translated msgid "Strawberry red" -msgstr "" +msgstr "草莓红" +# AI Translated msgid "Traffic red" -msgstr "" +msgstr "交通红" +# AI Translated msgid "Salmon pink" -msgstr "" +msgstr "鲑鱼粉" +# AI Translated msgid "Luminous rose" -msgstr "" +msgstr "荧光玫瑰红" +# AI Translated msgid "Luminous bright red" -msgstr "" +msgstr "荧光亮红" +# AI Translated msgid "Raspberry red" -msgstr "" +msgstr "覆盆子红" +# AI Translated msgid "Orient red" -msgstr "" +msgstr "东方红" +# AI Translated msgid "Pearl ruby" -msgstr "" +msgstr "珍珠红宝石" +# AI Translated msgid "Red purple" -msgstr "" +msgstr "红紫色" +# AI Translated msgid "Red violet" -msgstr "" +msgstr "红紫罗兰色" +# AI Translated msgid "Heather violet" -msgstr "" +msgstr "石楠紫" +# AI Translated msgid "Bordeaux violet" -msgstr "" +msgstr "波尔多紫" +# AI Translated msgid "Mahogany" -msgstr "" +msgstr "桃花心木色" +# AI Translated msgid "Grey purple" -msgstr "" +msgstr "灰紫色" +# AI Translated msgid "Signal violet" -msgstr "" +msgstr "信号紫" +# AI Translated msgid "Fir green" -msgstr "" +msgstr "冷杉绿" +# AI Translated msgid "Sabine grey" -msgstr "" +msgstr "萨宾灰" +# AI Translated msgid "Pearl violet" -msgstr "" +msgstr "珍珠紫" +# AI Translated msgid "Pearl blackberry" -msgstr "" +msgstr "珍珠黑莓色" +# AI Translated msgid "Green blue" -msgstr "" +msgstr "绿蓝色" +# AI Translated msgid "Ultramarine blue" -msgstr "" +msgstr "群青蓝" +# AI Translated msgid "Sapphire blue" -msgstr "" +msgstr "蓝宝石蓝" +# AI Translated msgid "Black blue" -msgstr "" +msgstr "黑蓝色" +# AI Translated msgid "Signal blue" -msgstr "" +msgstr "信号蓝" +# AI Translated msgid "Brilliant blue" -msgstr "" +msgstr "艳蓝色" +# AI Translated msgid "Grey blue" -msgstr "" +msgstr "灰蓝色" +# AI Translated msgid "Azure blue" -msgstr "" +msgstr "蔚蓝色" +# AI Translated msgid "Gentian blue" -msgstr "" +msgstr "龙胆蓝" +# AI Translated msgid "Cobalt blue" -msgstr "" +msgstr "钴蓝" +# AI Translated msgid "Pigeon blue" -msgstr "" +msgstr "鸽蓝" +# AI Translated msgid "Traffic blue" -msgstr "" +msgstr "交通蓝" +# AI Translated msgid "Turquoise blue" -msgstr "" +msgstr "绿松石蓝" +# AI Translated msgid "Capsanthin violet" -msgstr "" +msgstr "辣椒红素紫" +# AI Translated msgid "Ocean blue" -msgstr "" +msgstr "海洋蓝" +# AI Translated msgid "Water blue" -msgstr "" +msgstr "水蓝色" +# AI Translated msgid "Night blue" -msgstr "" +msgstr "夜蓝色" +# AI Translated msgid "Distant blue" -msgstr "" +msgstr "远蓝色" +# AI Translated msgid "Pastel blue" -msgstr "" +msgstr "粉彩蓝" +# AI Translated msgid "Pearl gentian blue" -msgstr "" +msgstr "珍珠龙胆蓝" +# AI Translated msgid "Pearl midnight blue" -msgstr "" +msgstr "珍珠午夜蓝" +# AI Translated msgid "Patina green" -msgstr "" +msgstr "铜绿色" +# AI Translated msgid "Emerald green" -msgstr "" +msgstr "翡翠绿" +# AI Translated msgid "Leaf green" -msgstr "" +msgstr "叶绿色" +# AI Translated msgid "Olive green" -msgstr "" +msgstr "橄榄绿" +# AI Translated msgid "Blue green" -msgstr "" +msgstr "蓝绿色" +# AI Translated msgid "Moss green" -msgstr "" +msgstr "苔藓绿" +# AI Translated msgid "Grey olive" -msgstr "" +msgstr "灰橄榄绿" +# AI Translated msgid "Pine green" -msgstr "" +msgstr "松绿色" +# AI Translated msgid "Pine brown" -msgstr "" +msgstr "松棕色" +# AI Translated msgid "Grass green" -msgstr "" +msgstr "草绿色" +# AI Translated msgid "Reseda green" -msgstr "" +msgstr "木犀草绿" +# AI Translated msgid "Brown green" -msgstr "" +msgstr "棕绿色" +# AI Translated msgid "Reed green" -msgstr "" +msgstr "芦苇绿" +# AI Translated msgid "Black green" -msgstr "" +msgstr "黑绿色" +# AI Translated msgid "Turquoise green" -msgstr "" +msgstr "绿松石绿" +# AI Translated msgid "May green" -msgstr "" +msgstr "五月绿" +# AI Translated msgid "Chrome oxide green" -msgstr "" +msgstr "氧化铬绿" +# AI Translated msgid "Traffic green" -msgstr "" +msgstr "交通绿" +# AI Translated msgid "Fern green" -msgstr "" +msgstr "蕨绿色" +# AI Translated msgid "Opal green" -msgstr "" +msgstr "蛋白石绿" +# AI Translated msgid "Mint green" -msgstr "" +msgstr "薄荷绿" +# AI Translated msgid "Bronze green" -msgstr "" +msgstr "青铜绿" +# AI Translated msgid "Pearl green" -msgstr "" +msgstr "珍珠绿" +# AI Translated msgid "Sax turquoise" -msgstr "" +msgstr "萨克森绿松石色" +# AI Translated msgid "Pearl turquoise" -msgstr "" +msgstr "珍珠绿松石色" +# AI Translated msgid "Pearl jade" -msgstr "" +msgstr "珍珠玉绿" +# AI Translated msgid "Pure green" -msgstr "" +msgstr "纯绿色" +# AI Translated msgid "Luminous green" -msgstr "" +msgstr "荧光绿" +# AI Translated msgid "Squirrel grey" -msgstr "" +msgstr "松鼠灰" +# AI Translated msgid "Silver grey" -msgstr "" +msgstr "银灰色" +# AI Translated msgid "Olivestone" -msgstr "" +msgstr "橄榄石色" +# AI Translated msgid "Moss grey" -msgstr "" +msgstr "苔藓灰" +# AI Translated msgid "Signal grey" -msgstr "" +msgstr "信号灰" +# AI Translated msgid "Mouse grey" -msgstr "" +msgstr "鼠灰色" +# AI Translated msgid "Beige grey" -msgstr "" +msgstr "米灰色" +# AI Translated msgid "Khaki grey" -msgstr "" +msgstr "卡其灰" +# AI Translated msgid "Green grey" -msgstr "" +msgstr "绿灰色" +# AI Translated msgid "Tarpaulin grey" -msgstr "" +msgstr "篷布灰" +# AI Translated msgid "Iron grey" -msgstr "" +msgstr "铁灰色" +# AI Translated msgid "Basalt grey" -msgstr "" +msgstr "玄武岩灰" +# AI Translated msgid "Brown grey" -msgstr "" +msgstr "棕灰色" +# AI Translated msgid "Slate grey" -msgstr "" +msgstr "石板灰" +# AI Translated msgid "Anthracite grey" -msgstr "" +msgstr "无烟煤灰" +# AI Translated msgid "Light grey" -msgstr "" +msgstr "浅灰色" +# AI Translated msgid "Umber grey" -msgstr "" +msgstr "棕土灰" +# AI Translated msgid "Concrete grey" -msgstr "" +msgstr "混凝土灰" +# AI Translated msgid "Graphite grey" -msgstr "" +msgstr "石墨灰" +# AI Translated msgid "Granite grey" -msgstr "" +msgstr "花岗岩灰" +# AI Translated msgid "Stone grey" -msgstr "" +msgstr "岩石灰" +# AI Translated msgid "Pebble grey" -msgstr "" +msgstr "卵石灰" +# AI Translated msgid "Cement grey" -msgstr "" +msgstr "水泥灰" +# AI Translated msgid "Yellow grey" -msgstr "" +msgstr "黄灰色" +# AI Translated msgid "Platinum grey" -msgstr "" +msgstr "铂灰色" +# AI Translated msgid "Dusty grey" -msgstr "" +msgstr "尘灰色" +# AI Translated msgid "Agate grey" -msgstr "" +msgstr "玛瑙灰" +# AI Translated msgid "Quartz grey" -msgstr "" +msgstr "石英灰" +# AI Translated msgid "Window grey" -msgstr "" +msgstr "窗灰色" +# AI Translated msgid "Traffic grey A" -msgstr "" +msgstr "交通灰 A" +# AI Translated msgid "Traffic grey B" -msgstr "" +msgstr "交通灰 B" +# AI Translated msgid "Silk grey" -msgstr "" +msgstr "丝绸灰" +# AI Translated msgid "Telegrey 1" -msgstr "" +msgstr "电信灰 1" +# AI Translated msgid "Telegrey 2" -msgstr "" +msgstr "电信灰 2" +# AI Translated msgid "Telegrey 4" -msgstr "" +msgstr "电信灰 4" +# AI Translated msgid "Pearl mouse grey" -msgstr "" +msgstr "珍珠鼠灰" +# AI Translated msgid "Green brown" -msgstr "" +msgstr "绿棕色" +# AI Translated msgid "Ochre brown" -msgstr "" +msgstr "赭棕色" +# AI Translated msgid "Clay brown" -msgstr "" +msgstr "黏土棕" +# AI Translated msgid "Copper brown" -msgstr "" +msgstr "铜棕色" +# AI Translated msgid "Chocolate brown" -msgstr "" +msgstr "巧克力棕" +# AI Translated msgid "Olive brown" -msgstr "" +msgstr "橄榄棕" +# AI Translated msgid "Nut brown" -msgstr "" +msgstr "坚果棕" +# AI Translated msgid "Red brown" -msgstr "" +msgstr "红棕色" +# AI Translated msgid "Sepia brown" -msgstr "" +msgstr "乌贼墨棕" +# AI Translated msgid "Chestnut brown" -msgstr "" +msgstr "栗棕色" +# AI Translated msgid "Mahogany brown" -msgstr "" +msgstr "桃花心木棕" +# AI Translated msgid "Grey brown" -msgstr "" +msgstr "灰棕色" +# AI Translated msgid "Pearl copper" -msgstr "" +msgstr "珍珠铜色" +# AI Translated msgid "Beige brown" -msgstr "" +msgstr "米棕色" +# AI Translated msgid "Pearl mocha brown" -msgstr "" +msgstr "珍珠摩卡棕" +# AI Translated msgid "Earth brown" -msgstr "" +msgstr "土棕色" +# AI Translated msgid "Pearl brown" -msgstr "" +msgstr "珍珠棕" +# AI Translated msgid "Cream" -msgstr "" +msgstr "奶油色" +# AI Translated msgid "Grey white" -msgstr "" +msgstr "灰白色" +# AI Translated msgid "Signal white" -msgstr "" +msgstr "信号白" +# AI Translated msgid "Signal black" -msgstr "" +msgstr "信号黑" +# AI Translated msgid "Jet black" -msgstr "" +msgstr "乌黑色" +# AI Translated msgid "White aluminium" -msgstr "" +msgstr "白铝色" +# AI Translated msgid "Grey aluminium" -msgstr "" +msgstr "灰铝色" +# AI Translated msgid "Pure white" -msgstr "" +msgstr "纯白色" +# AI Translated msgid "Graphite black" -msgstr "" +msgstr "石墨黑" +# AI Translated msgid "Traffic white" -msgstr "" +msgstr "交通白" +# AI Translated msgid "Traffic black" -msgstr "" +msgstr "交通黑" +# AI Translated msgid "Papyrus white" -msgstr "" +msgstr "莎草纸白" +# AI Translated msgid "Pearl light grey" -msgstr "" +msgstr "珍珠浅灰" +# AI Translated msgid "Metal: Silver" -msgstr "" +msgstr "金属：银色" +# AI Translated msgid "Metal: Brass" -msgstr "" +msgstr "金属：黄铜" +# AI Translated msgid "Metal: Gold" -msgstr "" +msgstr "金属：金色" +# AI Translated msgid "Metal: Copper" -msgstr "" +msgstr "金属：铜色" +# AI Translated msgid "Metal: Bronze" -msgstr "" +msgstr "金属：青铜" +# AI Translated msgid "Nature: Pearl" -msgstr "" +msgstr "自然：珍珠" +# AI Translated msgid "Nature: Rainbow" -msgstr "" +msgstr "自然：彩虹" +# AI Translated msgid "Nature: Clear Sky" -msgstr "" +msgstr "自然：晴空" +# AI Translated msgid "Nature: Sunset" -msgstr "" +msgstr "自然：日落" +# AI Translated msgid "Wood: Dark" -msgstr "" +msgstr "木纹：深色" +# AI Translated msgid "Wood: Medium" -msgstr "" +msgstr "木纹：中色" +# AI Translated msgid "Wood: Light" -msgstr "" +msgstr "木纹：浅色" # AI Translated msgid "Alternate nozzles:" @@ -31450,7 +33152,7 @@ msgstr "您好，欢迎使用 %s！此%s将帮助您完成初始配置，只需 # AI Translated msgid "Remove user profiles (a snapshot will be taken beforehand)" -msgstr "删除用户配置文件（删除前会先创建快照）" +msgstr "删除用户预设（删除前会先创建快照）" # AI Translated msgid "Perform desktop integration (Sets this binary to be searchable by the system)." @@ -31471,7 +33173,7 @@ msgstr "供应商：" # AI Translated msgid "Profile:" -msgstr "配置文件：" +msgstr "预设：" # AI Translated msgid "(All)" @@ -31517,11 +33219,11 @@ msgstr "自定义打印机设置" # AI Translated msgid "Define a custom printer profile" -msgstr "定义自定义打印机配置文件" +msgstr "定义自定义打印机预设" # AI Translated msgid "Custom profile name:" -msgstr "自定义配置文件名称：" +msgstr "自定义预设名称：" # AI Translated msgid "Firmware Type" @@ -31622,12 +33324,12 @@ msgstr "SLA 技术打印机" # AI Translated #, boost-format msgid "The following printer profiles have no default filament: %1%Please select one manually." -msgstr "以下打印机配置文件没有默认耗材丝：%1%请手动选择一个。" +msgstr "以下打印机型号没有默认耗材丝：%1%请手动选择一个。" # AI Translated #, boost-format msgid "The following printer profiles have no default material: %1%Please select one manually." -msgstr "以下打印机配置文件没有默认材料：%1%请手动选择一个。" +msgstr "以下打印机型号没有默认材料：%1%请手动选择一个。" # AI Translated msgid "The following FFF printer models have no filament selected:" @@ -31684,7 +33386,7 @@ msgstr "下一步>" # AI Translated msgid "Filament Profiles Selection" -msgstr "耗材丝配置文件选择" +msgstr "耗材丝预设选择" # AI Translated msgid "Configuration Assistant" @@ -31729,7 +33431,7 @@ msgstr "需要调整位置" # AI Translated msgctxt "FilamentTrack" msgid "OK" -msgstr "确定" +msgstr "摆放正确" # AI Translated msgid "Unused" @@ -31817,7 +33519,7 @@ msgstr "图层 %1%" # AI Translated msgid "Average island scale" -msgstr "平均岛缩放" +msgstr "平均 UV 岛缩放" # AI Translated msgid "Select an island in the UV editor first." @@ -31825,7 +33527,7 @@ msgstr "请先在 UV 编辑器中选择一个岛。" # AI Translated msgid "Cut texture island" -msgstr "切开纹理岛" +msgstr "切开纹理 UV 岛" # AI Translated msgid "This island has no neighbour it shares an edge with." @@ -31833,11 +33535,11 @@ msgstr "此岛没有与之共享边的相邻岛。" # AI Translated msgid "Join texture island" -msgstr "拼接纹理岛" +msgstr "拼接纹理 UV 岛" # AI Translated msgid "Unjoin texture island" -msgstr "取消拼接纹理岛" +msgstr "取消拼接纹理 UV 岛" # AI Translated msgid "Clear texture seams" @@ -31853,7 +33555,7 @@ msgstr "应用纹理投影框" # AI Translated msgid "Move texture island" -msgstr "移动纹理岛" +msgstr "移动纹理 UV 岛" # AI Translated msgid "Edit texture UV" @@ -31909,7 +33611,7 @@ msgstr "导入您自己的图像作为高度图。图像会被转换为切片软 # AI Translated msgid "PNG, JPG or BMP - converted to a height map on import. Hover one of yours to remove it." -msgstr "PNG、JPG 或 BMP - 导入时转换为高度图。将鼠标悬停在您自己的纹理上即可将其移除。" +msgstr "PNG、JPG 或 BMP：导入时转换为高度图。将鼠标悬停在您自己的纹理上即可将其移除。" # AI Translated #, c-format, boost-format @@ -31992,7 +33694,7 @@ msgstr "细分模型以进行纹理置换" # AI Translated msgid "Paint the area you want to subdivide first - adaptive subdivision only refines where you have painted." -msgstr "请先绘制要细分的区域 - 自适应细分只会细化您绘制过的区域。" +msgstr "请先绘制要细分的区域，自适应细分只会细化您绘制过的区域。" # AI Translated msgid "Adaptive subdivide for texture displacement" @@ -32000,15 +33702,15 @@ msgstr "自适应细分以进行纹理置换" # AI Translated msgid "Nothing to subdivide - the painted area already meets the target edge length and detail tolerance, or the triangle budget is already used up." -msgstr "无需细分 - 绘制区域已满足目标边长和细节容差，或三角形预算已用完。" +msgstr "无需细分：绘制区域已满足目标边长和细节容差，或三角形预算已用完。" # AI Translated msgid "Paint the area you want to smooth first - smoothing only touches the painted part of the model." -msgstr "请先绘制要平滑的区域 - 平滑只作用于模型上已绘制的部分。" +msgstr "请先绘制要平滑的区域，平滑只作用于模型上已绘制的部分。" # AI Translated msgid "Nothing to smooth - the painted area is only one triangle deep, so with \"Ignore outer ring\" on there are no interior vertices to relax." -msgstr "无需平滑 - 绘制区域只有一个三角形的深度，因此开启“忽略外圈”时没有可松弛的内部顶点。" +msgstr "无需平滑：绘制区域只有一个三角形的深度，因此开启“忽略外圈”时没有可松弛的内部顶点。" # AI Translated msgid "Smooth texture displacement" @@ -32048,7 +33750,7 @@ msgstr "捕获阶段" # AI Translated msgid "Run the same bake the Bake button runs, keeping the mesh after every stage, and step through them here. Nothing is committed to the model - this is for finding which stage a bad result came from." -msgstr "执行与“烘焙”按钮相同的烘焙，保留每个阶段之后的网格，并可在此逐一查看。不会向模型提交任何内容 - 用于找出不良结果来自哪个阶段。" +msgstr "执行与“烘焙”按钮相同的烘焙，保留每个阶段之后的网格，并可在此逐一查看。不会向模型提交任何内容，仅用于找出不良结果来自哪个阶段。" # AI Translated msgid "Check topology" @@ -32121,11 +33823,11 @@ msgstr "专业" # AI Translated msgid "Standard - pick a texture, paint where it goes, press Bake. Everything the mesh needs is done for you in that one step." -msgstr "标准 - 选择纹理，在需要的位置绘制，然后按“烘焙”。网格所需的所有处理都会在这一步中自动完成。" +msgstr "标准：选择纹理，在需要的位置绘制，然后按“烘焙”。网格所需的所有处理都会在这一步中自动完成。" # AI Translated msgid "Pro - the mesh preparation is yours to run: Remesh, Subdivide and Bake as separate steps, with every setting on show. For when Standard's result is not what you wanted and you know why." -msgstr "专业 - 网格准备由您自行执行：重新网格化、细分和烘焙为独立的步骤，所有设置均会显示。适用于标准模式的结果不符合预期、且您清楚原因的情况。" +msgstr "专业：网格准备由您自行执行，重新网格化、细分和烘焙为独立的步骤，所有设置均会显示。适用于标准模式的结果不符合预期、且您清楚原因的情况。" # AI Translated msgid "Dock panel" @@ -32150,19 +33852,19 @@ msgstr "添加图层以进行绘制" # AI Translated msgid "Paint - add the active layer where you click or drag. The right button erases, and so does holding Shift." -msgstr "绘制 - 在单击或拖动处添加当前图层。右键可擦除，按住 Shift 也可擦除。" +msgstr "绘制：在单击或拖动处添加当前图层。右键可擦除，按住 Shift 也可擦除。" # AI Translated msgid "Erase - remove the active layer where you click or drag. The right button paints." -msgstr "擦除 - 在单击或拖动处移除当前图层。右键可绘制。" +msgstr "擦除：在单击或拖动处移除当前图层。右键可绘制。" # AI Translated msgid "Brush - paint over the surface by dragging" -msgstr "画刷 - 拖动以在表面上绘制" +msgstr "画刷：拖动以在表面上绘制" # AI Translated msgid "Face - click individual triangles" -msgstr "面 - 单击单个三角形" +msgstr "面：单击单个三角形" # AI Translated msgid "Connected area" @@ -32170,7 +33872,7 @@ msgstr "连通区域" # AI Translated msgid "Connected area - flood-fill the region reachable without crossing an edge sharper than the angle threshold" -msgstr "连通区域 - 填充无需跨越比角度阈值更锐利的边即可到达的区域" +msgstr "连通区域：填充无需跨越比角度阈值更锐利的边即可到达的区域" # AI Translated msgid "Wait for the bake to finish." @@ -32190,7 +33892,7 @@ msgstr "选择整个模型" # AI Translated msgid "Select whole model - paint every face of the model with the active layer" -msgstr "选择整个模型 - 用当前图层绘制模型的每个面" +msgstr "选择整个模型：用当前图层绘制模型的每个面" # AI Translated msgid "Erase whole model" @@ -32198,7 +33900,7 @@ msgstr "擦除整个模型" # AI Translated msgid "Erase whole model - clear the active layer's paint from every face" -msgstr "擦除整个模型 - 清除当前图层在每个面上的绘制" +msgstr "擦除整个模型：清除当前图层在每个面上的绘制" # AI Translated msgid "Reset texture displacement selection" @@ -32206,15 +33908,15 @@ msgstr "重置纹理置换选择" # AI Translated msgid "Circle - paints everything under the brush as seen from the camera" -msgstr "圆 - 绘制从相机视角看画刷下的所有内容" +msgstr "圆：绘制从相机视角看画刷下的所有内容" # AI Translated msgid "Sphere - paints only within a ball around the point under the cursor" -msgstr "球 - 仅在光标所指点周围的球体内绘制" +msgstr "球：仅在光标所指点周围的球体内绘制" # AI Translated msgid "Angle threshold - the fill stops at edges sharper than this" -msgstr "角度阈值 - 填充会在比此角度更锐利的边处停止" +msgstr "角度阈值：填充会在比此角度更锐利的边处停止" # AI Translated msgid "Click a triangle to paint it" @@ -32226,11 +33928,11 @@ msgstr "仅适用于映射为“展开 (LSCM)”的图层，将当前图层的 # AI Translated msgid "Normal - the real geometry, exactly what Bake will produce. Slower to update" -msgstr "常规 - 真实几何体，与烘焙结果完全一致。更新较慢" +msgstr "常规：真实几何体，与烘焙结果完全一致。更新较慢" # AI Translated msgid "Fast - the relief is only shaded on, not built, and only for the layer you are editing. Updates instantly while you paint" -msgstr "快速 - 起伏仅通过着色显示而未实际构建，且仅针对正在编辑的图层。绘制时即时更新" +msgstr "快速：起伏仅通过着色显示而未实际构建，且仅针对正在编辑的图层。绘制时即时更新" # AI Translated msgid "Checker" @@ -32238,7 +33940,7 @@ msgstr "棋盘格" # AI Translated msgid "Checker - a test grid instead of the texture. Where the squares stay square the texture is undistorted; where they stretch, it will too. Opens the UV editor if it is closed" -msgstr "棋盘格 - 用测试网格代替纹理显示。方格保持方正处，纹理无变形；方格被拉伸处，纹理也会被拉伸。若 UV 编辑器未打开，将自动打开" +msgstr "棋盘格：用测试网格代替纹理显示。方格保持方正处，纹理无变形；方格被拉伸处，纹理也会被拉伸。若 UV 编辑器未打开，将自动打开" # AI Translated msgid "Distortion" @@ -32246,15 +33948,15 @@ msgstr "畸变" # AI Translated msgid "Distortion - blue-to-red stretch heatmap over the unwrap. Opens the UV editor if it is closed" -msgstr "畸变 - 在展开图上叠加由蓝到红的拉伸热力图。若 UV 编辑器未打开，将自动打开" +msgstr "畸变：在展开图上叠加由蓝到红的拉伸热力图。若 UV 编辑器未打开，将自动打开" # AI Translated msgid "Wireframe - overlay the mesh edges; independent of the view above" -msgstr "线框 - 叠加显示网格边；与上方的视图无关" +msgstr "线框：叠加显示网格边；与上方的视图无关" # AI Translated msgid "Rebuilds the preview as soon as anything changes. Turn it off on a heavy model if painting or dragging a slider starts to stutter - the preview then waits until you let go." -msgstr "任何内容更改后立即重建预览。如果在较大的模型上绘制或拖动滑块时开始卡顿，请将其关闭 - 预览将等到您松开后再更新。" +msgstr "任何内容更改后立即重建预览。如果在较大的模型上绘制或拖动滑块时开始卡顿，请将其关闭，预览将等到您松开后再更新。" # AI Translated msgid "Texture layers" @@ -32278,11 +33980,11 @@ msgstr "亮度、对比度、锐度、模糊和色相，设置时会同步显示 # AI Translated msgid "Move up - applied earlier" -msgstr "上移 - 更早应用" +msgstr "上移：更早应用" # AI Translated msgid "Move down - applied later" -msgstr "下移 - 更晚应用" +msgstr "下移：更晚应用" # AI Translated msgid "Remove this layer" @@ -32298,21 +34000,23 @@ msgstr "平铺尺寸" # AI Translated msgid "Mapped by the model's own UV layout, which is already the placement - one copy of the texture covers it exactly, so there is no tile size to set." -msgstr "按模型自身的 UV 布局映射，该布局本身就是放置方式 - 纹理的一个副本即可精确覆盖，因此无需设置平铺尺寸。" +msgstr "按模型自身的 UV 布局映射，该布局本身就是放置方式：纹理的一个副本即可精确覆盖，因此无需设置平铺尺寸。" # AI Translated msgid "How wide one copy of the texture is on the model. Smaller repeats the pattern more often and makes its detail finer; with Tile off, this is the size of the single copy." msgstr "纹理的一个副本在模型上的宽度。数值越小，图案重复越频繁、细节越精细；关闭“平铺”时，这是单个副本的尺寸。" +# AI Translated msgid "Larger" -msgstr "" +msgstr "较大" +# AI Translated msgid "Smaller" -msgstr "" +msgstr "较小" # AI Translated msgid "Turns the texture on the surface, in degrees - for lining a pattern up with an edge of the model." -msgstr "旋转表面上的纹理，单位为度 - 用于将图案与模型的某条边对齐。" +msgstr "旋转表面上的纹理，单位为度，用于将图案与模型的某条边对齐。" # AI Translated msgid "Midlevel" @@ -32324,7 +34028,7 @@ msgid "" "\n" "What cuts in has to fit: inside a sharp corner or through a thin wall, a deep cut can pass through the other side." msgstr "" -"哪种灰度保持在表面当前的位置。设为 0 时，纹理只向外推出；设为 0.5 时，中灰色保持不动，较暗的灰色向内切入，较亮的灰色仍向外推出 - 同一张图像既能浮雕又能雕刻。\n" +"哪种灰度保持在表面当前的位置。设为 0 时，纹理只向外推出；设为 0.5 时，中灰色保持不动，较暗的灰色向内切入，较亮的灰色仍向外推出，因此同一张图像既能浮雕又能雕刻。\n" "\n" "向内切入的部分必须有足够空间：在尖锐的内角处或薄壁上，较深的切入可能会穿透到另一侧。" @@ -32384,11 +34088,13 @@ msgstr "混色数量" msgid "The most mixed filaments a bake may add. They are picked from the texture's colors, and only the ones the bake actually uses are created." msgstr "烘焙时最多可添加的混合耗材丝数量。混合耗材丝从纹理颜色中选取，且只会创建烘焙实际用到的那些。" +# AI Translated msgid "Few" -msgstr "" +msgstr "较少" +# AI Translated msgid "Many" -msgstr "" +msgstr "较多" # AI Translated #. TRN The %2% part of "%1% printable colors %2%"; %1% is the number of filaments. @@ -32423,11 +34129,11 @@ msgstr "三平面（混合）" # AI Translated msgid "Triplanar - projects the texture from all three axes at once and blends between them, so a patch wrapping around a sharp edge has no seam." -msgstr "三平面 - 同时从三个轴向投影纹理并在它们之间混合，因此环绕尖锐边的区域不会出现接痕。" +msgstr "三平面：同时从三个轴向投影纹理并在它们之间混合，因此环绕尖锐边的区域不会出现接痕。" # AI Translated msgid "Cylindrical - wraps the texture around the painted area's own center, for round shapes." -msgstr "柱面 - 以绘制区域自身的中心为轴环绕纹理，适用于圆形物体。" +msgstr "柱面：以绘制区域自身的中心为轴环绕纹理，适用于圆形物体。" # AI Translated msgid "Spherical" @@ -32435,7 +34141,7 @@ msgstr "球面" # AI Translated msgid "Spherical - wraps the texture around the painted area's own center in both directions." -msgstr "球面 - 以绘制区域自身的中心在两个方向上环绕纹理。" +msgstr "球面：以绘制区域自身的中心在两个方向上环绕纹理。" # AI Translated msgid "Unwrap (LSCM)" @@ -32443,7 +34149,7 @@ msgstr "展开 (LSCM)" # AI Translated msgid "Unwrap - flattens the painted area and maps the texture onto it with as little stretching as possible. The area is cut into pieces at its sharp edges first (see Seam angle), so each piece can lie flat on its own." -msgstr "展开 - 将绘制区域展平，并以尽可能小的拉伸将纹理映射到其上。该区域会先在其尖锐边处切成若干块（参见“切缝角度”），使每一块都能单独展平。" +msgstr "展开：将绘制区域展平，并以尽可能小的拉伸将纹理映射到其上。该区域会先在其尖锐边处切成若干块（参见“切缝角度”），使每一块都能单独展平。" # AI Translated msgid "From view" @@ -32451,7 +34157,7 @@ msgstr "从视图" # AI Translated msgid "From view - projects straight onto the painted area from where you are looking, like a slide projector." -msgstr "从视图 - 从您当前观察的方向直接投影到绘制区域上，就像幻灯机一样。" +msgstr "从视图：从您当前观察的方向直接投影到绘制区域上，就像幻灯机一样。" # AI Translated msgid "Model UV" @@ -32459,7 +34165,7 @@ msgstr "模型 UV" # AI Translated msgid "Model UV - uses the texture coordinates the model itself came with, so a texture made for that model lands exactly where it was painted. Nothing is unwrapped, and Tile size does not apply: the model's own layout is the placement." -msgstr "模型 UV - 使用模型自带的纹理坐标，因此为该模型制作的纹理会精确落在其绘制的位置。不会进行展开，“平铺尺寸”也不适用：模型自身的布局就是放置方式。" +msgstr "模型 UV：使用模型自带的纹理坐标，因此为该模型制作的纹理会精确落在其绘制的位置。不会进行展开，“平铺尺寸”也不适用，因为模型自身的布局就是放置方式。" # AI Translated msgid "This model carries no texture coordinates of its own. Only a model imported with a UV channel - a textured OBJ, say - can be mapped by them." @@ -32489,7 +34195,7 @@ msgstr "捕获当前视图" # AI Translated msgid "Nothing is visible from this angle - turn the model to face the part you want to project onto." -msgstr "从此角度看不到任何内容 - 请旋转模型，使要投影的部分朝向您。" +msgstr "从此角度看不到任何内容，请旋转模型，使要投影的部分朝向您。" # AI Translated msgid "Projects the texture onto the painted area from where you are looking now, like a slide projector. Faces turned away from you stretch, so line the view up with the surface you care about first." @@ -32501,7 +34207,7 @@ msgstr "仅投影到可见面" # AI Translated msgid "Paints only the faces you can actually see right now - facing you and not hidden behind anything - and projects onto those. Replaces what the layer had painted." -msgstr "仅绘制您此刻真正能看到的面 - 朝向您且未被任何物体遮挡 - 并投影到这些面上。会替换该图层原有的绘制。" +msgstr "仅绘制您此刻真正能看到的面（朝向您且未被任何物体遮挡），并投影到这些面上。会替换该图层原有的绘制。" # AI Translated msgid "Projection frame" @@ -32521,7 +34227,7 @@ msgstr "应用投影框" # AI Translated msgid "Nothing of the model is inside the frame - move it over the part you want to project onto." -msgstr "框内没有模型的任何部分 - 请将其移到要投影的部分上。" +msgstr "框内没有模型的任何部分，请将其移到要投影的部分上。" # AI Translated msgid "The frame could not be applied. Make sure it overlaps the 3D view." @@ -32553,7 +34259,7 @@ msgstr "镜像重复" # AI Translated msgid "Mirrored repeat - every other tile is flipped, so edges meet seamlessly" -msgstr "镜像重复 - 每隔一块翻转一次，使边缘无缝衔接" +msgstr "镜像重复：每隔一块翻转一次，使边缘无缝衔接" # AI Translated msgid "Blend" @@ -32589,7 +34295,7 @@ msgstr "基础图层下方没有可与之组合的内容，因此始终使用“ # AI Translated msgid "What this layer does where it overlaps the ones below. Add and Subtract pile relief on or carve it away. Override replaces them, so only this layer's relief is left where it is painted. Multiply and Divide scale what is underneath, which turns this layer into a mask over it - there, Depth acts as a strength, and 1 mm leaves white areas untouched." -msgstr "此图层与下方图层重叠处的作用方式。“添加”和“相减”会堆叠或削减起伏。“覆盖”会取代下方图层，因此在绘制处只保留此图层的起伏。“相乘”和“相除”会缩放下方的内容，使此图层成为其上的遮罩 - 此时“深度”相当于强度，1 mm 时白色区域保持不变。" +msgstr "此图层与下方图层重叠处的作用方式。“添加”和“相减”会堆叠或削减起伏。“覆盖”会取代下方图层，因此在绘制处只保留此图层的起伏。“相乘”和“相除”会缩放下方的内容，使此图层成为其上的遮罩，此时“深度”相当于强度，1 mm 时白色区域保持不变。" # AI Translated msgid "Adjust placement" @@ -32597,7 +34303,7 @@ msgstr "调整位置" # AI Translated msgid "Adjust placement - drag the handle on the model to move the texture" -msgstr "调整位置 - 拖动模型上的控制柄以移动纹理" +msgstr "调整位置：拖动模型上的控制柄以移动纹理" # AI Translated msgid "Paint something with this layer first." @@ -32639,7 +34345,7 @@ msgstr "跟随纹理细节" # AI Translated msgid "Spends the triangles where the texture actually bends - packed along ridges and edges, sparse over flat ground - instead of spreading them evenly. The same detail for fewer triangles on most textures." -msgstr "将三角形用在纹理实际发生弯折的地方 - 沿脊线和边缘密集分布，在平坦处稀疏分布 - 而不是均匀分布。对大多数纹理而言，可用更少的三角形获得相同的细节。" +msgstr "将三角形用在纹理实际发生弯折的地方（沿脊线和边缘密集分布，在平坦处稀疏分布），而不是均匀分布。对大多数纹理而言，可用更少的三角形获得相同的细节。" # AI Translated msgid "Max edge" @@ -32687,7 +34393,7 @@ msgstr "颜色细节" # AI Translated msgid "Triangle size where two colors meet. Each triangle prints in one filament, so a color edge can only be as sharp as the triangles along it - and nothing else refines there, since the surface is flat across a change of color. 0 turns it off." -msgstr "两种颜色交界处的三角形尺寸。每个三角形只用一种耗材丝打印，因此颜色边界的锐利程度取决于沿边界的三角形 - 而由于颜色变化处的表面是平坦的，那里不会有其他细化。0 表示关闭。" +msgstr "两种颜色交界处的三角形尺寸。每个三角形只用一种耗材丝打印，因此颜色边界的锐利程度取决于沿边界的三角形；而由于颜色变化处的表面是平坦的，那里不会有其他细化。0 表示关闭。" # AI Translated msgid "Triangle budget: set with Triangles, below." @@ -32705,7 +34411,7 @@ msgstr "次数" # AI Translated msgid "Splits every triangle of the model into four, this many times over. Each step quadruples the count - 3 turns 100 k triangles into 6.4 M - so prefer refining only the painted area unless you need the whole model finer." -msgstr "将模型的每个三角形拆分为四个，重复此次数。每一次都会使数量变为四倍 - 3 次会把 10 万个三角形变成 640 万个 - 因此除非需要整个模型都更精细，否则请优先只细化绘制区域。" +msgstr "将模型的每个三角形拆分为四个，重复此次数。每一次都会使数量变为四倍（3 次会把 10 万个三角形变成 640 万个），因此除非需要整个模型都更精细，否则请优先只细化绘制区域。" # AI Translated msgid "Hide preview" @@ -32739,11 +34445,13 @@ msgstr "重新网格化" msgid "Triangle size the whole model is rebuilt with, in millimetres. Displacement works best on an even mesh; this is what makes one out of an uneven import." msgstr "重建整个模型所用的三角形尺寸，单位为毫米。置换在均匀的网格上效果最好；这一步能把不均匀的导入模型变为均匀网格。" +# AI Translated msgid "Before" -msgstr "" +msgstr "处理前" +# AI Translated msgid "After" -msgstr "" +msgstr "处理后" # AI Translated msgid "Keep sharp edges" @@ -32751,7 +34459,7 @@ msgstr "保留锐边" # AI Translated msgid "Holds hard edges and open borders in place while the rest is remeshed. Without it the remesher slides vertices along the surface and rounds every crisp edge off - a cube comes back with wobbly edges." -msgstr "在重新网格化其余部分时，保持硬边和开放边界不动。否则重新网格化会让顶点沿表面滑动，把每条锐利的边都磨圆 - 立方体会变得边缘歪歪扭扭。" +msgstr "在重新网格化其余部分时，保持硬边和开放边界不动。否则重新网格化会让顶点沿表面滑动，把每条锐利的边都磨圆，立方体会变得边缘歪歪扭扭。" # AI Translated msgid "How sharp a fold has to be, in degrees, before the remesher treats it as an edge worth keeping. Lower protects more of the model's shape; higher rebuilds more of it evenly." @@ -32763,7 +34471,7 @@ msgstr "重新网格化" # AI Translated msgid "Rebuilds the whole model with triangles close to this edge length - splitting the big ones and merging the small ones - so displacement has an even density to work with. Replaces the geometry; your paint is carried onto the new triangles spatially, so it survives (already-baked relief is kept too)." -msgstr "以接近此边长的三角形重建整个模型 - 拆分大的三角形、合并小的三角形 - 使置换有均匀的密度可用。会替换几何体；您的绘制会按空间位置转移到新三角形上，因此会被保留（已烘焙的起伏也会保留）。" +msgstr "以接近此边长的三角形重建整个模型（拆分大的三角形、合并小的三角形），使置换有均匀的密度可用。会替换几何体；您的绘制会按空间位置转移到新三角形上，因此会被保留（已烘焙的起伏也会保留）。" # AI Translated msgid "Displace up to the border" @@ -32812,7 +34520,7 @@ msgstr "立即平滑已烘焙的网格" # AI Translated msgid "Applies the smoothing above to the model itself, right now, within the painted area. For relief that is already baked in - anything not yet baked is smoothed by Bake." -msgstr "立即将上述平滑应用于模型本身的绘制区域内。用于已烘焙的起伏 - 尚未烘焙的部分会在烘焙时平滑。" +msgstr "立即将上述平滑应用于模型本身的绘制区域内。用于已烘焙的起伏；尚未烘焙的部分会在烘焙时平滑。" # AI Translated msgid "Experimental: classic bake pipeline" @@ -32850,11 +34558,11 @@ msgstr "清理狭长三角形" # AI Translated msgid "Collapse the thin triangles refinement inherits from the model's own tessellation, before displacement samples them. A sliver's three corners land on three unrelated parts of the texture, which is what makes the relief look jagged." -msgstr "在置换对纹理进行采样之前，合并细化过程从模型自身的三角剖分中继承下来的细长三角形。狭长三角形的三个角会落在纹理中三个互不相关的位置，这正是起伏看起来呈锯齿状的原因。" +msgstr "在置换对纹理进行采样之前，合并细化过程从模型自身的三角剖分中继承下来的狭长三角形。狭长三角形的三个角会落在纹理中三个互不相关的位置，这正是起伏看起来呈锯齿状的原因。" # AI Translated msgid "On: the resolution follows the size of the model and the budget is left at its default. Untick to set both yourself - worth doing for a texture much finer or much coarser than the part it sits on." -msgstr "开启：分辨率随模型尺寸确定，预算保持默认值。取消勾选可自行设置两者 - 当纹理比其所在零件精细或粗糙得多时，值得这样做。" +msgstr "开启：分辨率随模型尺寸确定，预算保持默认值。取消勾选可自行设置两者；当纹理比其所在零件精细或粗糙得多时，值得这样做。" # AI Translated #, c-format, boost-format @@ -32868,12 +34576,12 @@ msgstr "根据模型尺寸选择：%1$.2f mm 三角形，预算 %2% k。取消 # AI Translated msgid "How fine the mesh is made under the paint, in millimetres. It has to be smaller than the detail you want out of the texture - a 0.5 mm groove needs triangles well under 0.5 mm. Smaller costs triangles fast: halving it needs four times as many, and once they no longer fit the budget the bake simplifies back down and the detail goes with it." -msgstr "绘制区域下网格的精细程度，单位为毫米。它必须小于您希望从纹理中得到的细节 - 0.5 mm 的凹槽需要远小于 0.5 mm 的三角形。数值越小，三角形消耗增长越快：减半需要四倍的数量，一旦超出预算，烘焙就会重新简化，细节也随之丢失。" +msgstr "绘制区域下网格的精细程度，单位为毫米。它必须小于您希望从纹理中得到的细节（0.5 mm 的凹槽需要远小于 0.5 mm 的三角形）。数值越小，三角形消耗增长越快：减半需要四倍的数量，一旦超出预算，烘焙就会重新简化，细节也随之丢失。" # AI Translated #, boost-format msgid "Needs about %1% triangles, budget %2% - the bake will simplify back down and lose detail." -msgstr "需要约 %1% 个三角形，预算为 %2% - 烘焙将重新简化并丢失细节。" +msgstr "需要约 %1% 个三角形，预算为 %2%，烘焙将重新简化并丢失细节。" # AI Translated msgid "How many thousand triangles the refinement may add to the model. The triangle that fits worst is always split first, so even a run that spends the lot has spent it where it shows most. Raise it if the relief still looks coarse." @@ -32889,7 +34597,7 @@ msgstr "正在烘焙..." # AI Translated msgid "Nothing is painted yet. The UV editor's seam tool is on, so strokes on the model mark seams instead of painting - turn it off in the pane to paint." -msgstr "尚未进行任何绘制。UV 编辑器的切缝工具已开启，因此在模型上的笔画会标记切缝而不是绘制 - 请在面板中将其关闭后再绘制。" +msgstr "尚未进行任何绘制。UV 编辑器的切缝工具已开启，因此在模型上的笔画会标记切缝而不是绘制，请在面板中将其关闭后再绘制。" # AI Translated msgid "Nothing is painted yet." @@ -32901,7 +34609,7 @@ msgstr "通过移动现有的顶点，将绘制的高度图转换为真实的几 # AI Translated msgid "Turn the painted height maps into real geometry. The mesh is remeshed to an even density and refined where the texture bends first, so the detail has vertices to land on - all in one step." -msgstr "将绘制的高度图转换为真实的几何体。网格会先被重新网格化为均匀密度，并在纹理弯折处进行细化，使细节有顶点可落 - 一步完成。" +msgstr "将绘制的高度图转换为真实的几何体。网格会先被重新网格化为均匀密度，并在纹理弯折处进行细化，使细节有顶点可落，全部一步完成。" # AI Translated msgid "Stops the bake. Whatever it had already finished stays on the model, and can be undone." @@ -32921,14 +34629,14 @@ msgstr "%1% k" #, boost-format msgid "Model: %1% triangle - the bake refines to the resolution above, up to its budget" msgid_plural "Model: %1% triangles - the bake refines to the resolution above, up to its budget" -msgstr[0] "模型：%1% 个三角形 - 烘焙会细化到上方的分辨率，直至达到预算" +msgstr[0] "模型：%1% 个三角形，烘焙会细化到上方的分辨率，直至达到预算" # AI Translated #. TRN %1% is a triangle count, either exact or rounded to thousands such as "120 k". #, boost-format msgid "Bake moves existing vertices - the model stays at %1% triangle" msgid_plural "Bake moves existing vertices - the model stays at %1% triangles" -msgstr[0] "烘焙会移动现有顶点 - 模型保持 %1% 个三角形" +msgstr[0] "烘焙会移动现有顶点，模型保持 %1% 个三角形" # AI Translated #, boost-format @@ -33928,7 +35636,7 @@ msgstr "仅自动确定最佳颜色数量，并重新计算耗材丝映射" # AI Translated msgid "Convert texture to painting using the specified color count and smooth level" -msgstr "使用指定的颜色数量和平滑等级将纹理转换为颜色绘制" +msgstr "使用指定的颜色数量和平滑等级将纹理转换为涂色" # AI Translated msgid "Reminder: parameters changed, click Apply to take effect" @@ -34000,7 +35708,7 @@ msgstr "所选图像为空。" # AI Translated msgid "Failed to prepare the texture for use." -msgstr "准备纹理以供使用失败。" +msgstr "纹理准备失败，无法使用。" # AI Translated msgid "Could not create the folder for imported textures." @@ -34028,7 +35736,7 @@ msgstr "无法读取纹理文件。" # AI Translated msgid "Projection frame - drag over the model, then Apply" -msgstr "投影框 - 拖动到模型上，然后单击“应用”" +msgstr "投影框：拖动到模型上，然后单击“应用”" # AI Translated msgid "Moving island | release to drop, Esc to cancel" @@ -34104,7 +35812,7 @@ msgstr " | 吸附已开启" # AI Translated msgid "Change texture - choose another one from the texture library" -msgstr "更换纹理 - 从纹理库中选择另一个纹理" +msgstr "更换纹理：从纹理库中选择另一个纹理" # AI Translated msgid "The active layer's tile size: how much of the model one repeat of the texture covers. The canvas is measured in tiles, so one grid cell is one repeat. Change it with Tile size in the layer's settings." @@ -34112,15 +35820,15 @@ msgstr "当前图层的平铺尺寸，即纹理每重复一次在模型上覆盖 # AI Translated msgid "Height map - show the layer's texture under the islands" -msgstr "高度图 - 在岛下方显示图层的纹理" +msgstr "高度图：在岛下方显示图层的纹理" # AI Translated msgid "Checker - a test grid; squares stay square where the unwrap does not stretch" -msgstr "棋盘格 - 测试网格；展开没有拉伸的地方，方格保持正方形" +msgstr "棋盘格：测试网格；展开没有拉伸的地方，方格保持正方形" # AI Translated msgid "Distortion - color each island by how much the unwrap stretches it" -msgstr "畸变 - 按展开对每个岛的拉伸程度为其着色" +msgstr "畸变：按展开对每个岛的拉伸程度为其着色" # AI Translated msgid "Unwrap" @@ -34136,7 +35844,7 @@ msgstr "比此角度更锐利的边会被切开，其两侧的部分分别展平 # AI Translated msgid "Connect islands" -msgstr "连接岛" +msgstr "连接 UV 岛" # AI Translated msgid "Lay the unwrap out as a connected net: pieces that share an edge are unfolded next to each other (a cube becomes a joined net rather than six loose squares). They stay separate islands, so you can still move any of them by hand afterwards." @@ -34144,51 +35852,51 @@ msgstr "将展开布局为相连的展开图：共享边的块会相邻展开（ # AI Translated msgid "Island - work on whole islands. Click one to select it, then drag to move it, right-drag to rotate it, or press R to rotate and S to scale with the mouse (click or Enter to confirm, Esc to cancel)." -msgstr "岛 - 以整个 UV 岛为单位操作。单击选中一个岛，然后拖动可移动，右键拖动可旋转，也可按 R 或 S 后用鼠标旋转或缩放（单击或按 Enter 确认，按 Esc 取消）。" +msgstr "岛：以整个 UV 岛为单位操作。单击选中一个岛，然后拖动可移动，右键拖动可旋转，也可按 R 或 S 后用鼠标旋转或缩放（单击或按 Enter 确认，按 Esc 取消）。" # AI Translated msgid "Vertex - drag vertices to reshape an island by hand; Shift adds to the selection, Ctrl toggles one in or out of it." -msgstr "顶点 - 拖动顶点，手动调整 UV 岛的形状；按住 Shift 可加选，按住 Ctrl 可切换单个顶点的选中状态。" +msgstr "顶点：拖动顶点，手动调整 UV 岛的形状；按住 Shift 可加选，按住 Ctrl 可切换单个顶点的选中状态。" # AI Translated msgid "Edge - drag edges to reshape an island by hand; Shift adds to the selection, Ctrl toggles one in or out of it." -msgstr "边 - 拖动边，手动调整 UV 岛的形状；按住 Shift 可加选，按住 Ctrl 可切换单条边的选中状态。" +msgstr "边：拖动边，手动调整 UV 岛的形状；按住 Shift 可加选，按住 Ctrl 可切换单条边的选中状态。" # AI Translated msgid "Mark seams - click edges on the model to cut the unwrap along them. The edge under the cursor is highlighted yellow; click to mark it red, click a red edge again to unmark it. Painting is paused while this is on." -msgstr "标记切缝 - 单击模型上的边，沿其切开展开。光标下的边以黄色高亮；单击可将其标记为红色，再次单击红色边可取消标记。开启此功能时会暂停绘制。" +msgstr "标记切缝：单击模型上的边，沿其切开展开。光标下的边以黄色高亮；单击可将其标记为红色，再次单击红色边可取消标记。开启此功能时会暂停绘制。" # AI Translated msgid "Path - instead of clicking every edge, click a start point and then an end point: the whole shortest path between them is seamed at once. Available while marking seams." -msgstr "路径 - 无需逐条单击边，只需单击起点和终点：两点之间的整条最短路径会一次性标记为切缝。在标记切缝时可用。" +msgstr "路径：无需逐条单击边，只需单击起点和终点，两点之间的整条最短路径就会一次性标记为切缝。在标记切缝时可用。" # AI Translated msgid "Clear seams - remove every seam marked on this layer" -msgstr "清除切缝 - 移除此图层上标记的所有切缝" +msgstr "清除切缝：移除此图层上标记的所有切缝" # AI Translated msgid "Average scale - give every island the same texel density" -msgstr "平均缩放 - 使每个岛具有相同的纹素密度" +msgstr "平均缩放：使每个岛具有相同的纹素密度" # AI Translated msgid "Cut - split the selected island across its long axis" -msgstr "切开 - 沿所选岛的长轴将其拆分" +msgstr "切开：沿所选岛的长轴将其拆分" # AI Translated msgid "Join - unfold the selected island onto its nearest neighbour along their shared edge" -msgstr "拼接 - 沿共享边将所选岛展开到其最近的相邻岛上" +msgstr "拼接：沿共享边将所选岛展开到其最近的相邻岛上" # AI Translated msgid "Unjoin - send the selected island back to its own packed position" -msgstr "取消拼接 - 将所选岛送回其自身的排布位置" +msgstr "取消拼接：将所选岛送回其自身的排布位置" # AI Translated msgid "Clear UV edits - discard all manual vertex/edge moves and return the unwrap to its automatic shape" -msgstr "清除 UV 编辑 - 放弃所有手动的顶点/边移动，使展开恢复为自动生成的形状" +msgstr "清除 UV 编辑：放弃所有手动的顶点/边移动，使展开恢复为自动生成的形状" # AI Translated msgid "Snap - stick islands together when dragging one against another" -msgstr "吸附 - 将一个岛拖向另一个岛时使它们贴合在一起" +msgstr "吸附：将一个岛拖向另一个岛时使它们贴合在一起" # AI Translated msgid "" @@ -34217,11 +35925,11 @@ msgstr "此面板对应当前纹理图层，该图层的映射必须为“展开 # AI Translated msgid "Out of date - the paint, the seams or the seam angle changed since this unwrap was made. Press to unwrap again." -msgstr "已过期 - 自生成此展开以来，绘制、切缝或切缝角度已更改。按下以重新展开。" +msgstr "已过期：自生成此展开以来，绘制、切缝或切缝角度已更改。按下以重新展开。" # AI Translated msgid "Flatten the painted area into UV islands. It is computed only when you press this, not on every edit - so paint, change the seam angle or mark seams first, then press Unwrap." -msgstr "将绘制区域展平为 UV 岛。仅在您按下此按钮时才会计算，而不是每次编辑都计算 - 因此请先绘制、更改切缝角度或标记切缝，然后再按“展开”。" +msgstr "将绘制区域展平为 UV 岛。仅在您按下此按钮时才会计算，而不是每次编辑都计算。因此请先绘制、更改切缝角度或标记切缝，然后再按“展开”。" # AI Translated msgid "Turn Mark seams on first - Path is a quicker way of marking them." @@ -34604,14 +36312,15 @@ msgid "Plugin installation failed: %1%" msgstr "插件安装失败：%1%" # AI Translated +# Needs human review: Confirm "catalog" means the plugin manager's registry, not a folder. #. TRN %1% is the plugin's cloud ID. #, boost-format msgid "%1%: installed plugin was not found in the catalog." -msgstr "%1%：在目录中未找到已安装的插件。" +msgstr "%1%：在插件列表中未找到已安装的插件。" # AI Translated msgid "Cloud plugin key is missing UUID." -msgstr "云端插件密钥缺少 UUID。" +msgstr "云端插件标识缺少 UUID。" # AI Translated msgid "Failed to subscribe to cloud plugin, see logs for more info." @@ -34846,7 +36555,7 @@ msgstr "类型 %1% 与名称“%2%”的功能冲突" # AI Translated #, boost-format msgid "Duplicate plugin key discovered: %1%" -msgstr "发现重复的插件密钥：%1%" +msgstr "发现重复的插件标识：%1%" # AI Translated msgid "Plugin load is still in progress" @@ -34915,7 +36624,7 @@ msgstr "拒绝更新已知插件目录之外的插件。" # AI Translated #, boost-format msgid "Cannot keep plugin local: local plugin key already exists: %1%" -msgstr "无法保留为本地插件：本地插件密钥已存在：%1%" +msgstr "无法保留为本地插件：本地插件标识已存在：%1%" # AI Translated #, boost-format @@ -34972,7 +36681,7 @@ msgstr "导入的区域未生成可拉伸的几何体" # AI Translated msgid "the profile crosses the revolve axis — it must lie on one side of it" -msgstr "轮廓跨越了旋转轴 — 它必须位于轴的一侧" +msgstr "轮廓跨越了旋转轴，必须位于轴的一侧" # AI Translated msgid "Failed to revolve" @@ -35386,21 +37095,23 @@ msgstr "" "三明治模式\n" "您知道吗？如果您的模型没有非常陡峭的悬垂，您可以使用三明治模式（内-外-内）来提高精度和层一致性。" +# AI Translated #: resources/data/hints.ini: [hint:Chamber temperature] msgid "" "Chamber temperature\n" "Did you know that OrcaSlicer supports chamber temperature?" msgstr "" -"仓温\n" -"您知道吗？OrcaSlicer支持仓温。" +"腔体温度\n" +"您知道吗？OrcaSlicer支持腔体温度。" +# AI Translated #: resources/data/hints.ini: [hint:Calibration] msgid "" "Calibration\n" "Did you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer." msgstr "" "校准\n" -"您知道吗？校准您的打印机可以带来奇迹？在OrcaSlicer中查看我们的备受欢迎的校准解决方案。" +"您知道吗？校准打印机能带来意想不到的效果！快来试试OrcaSlicer中广受好评的校准功能。" #: resources/data/hints.ini: [hint:Auxiliary fan] msgid "" @@ -35410,21 +37121,23 @@ msgstr "" "辅助风扇\n" "您知道吗？OrcaSlicer支持辅助部件冷却风扇。" +# AI Translated #: resources/data/hints.ini: [hint:Air filtration] msgid "" "Air filtration/Exhaust Fan\n" "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?" msgstr "" -"空气过滤/排气扇\n" -"您知道吗？OrcaSlicer可以支持空气过滤/排气扇。" +"空气过滤/排气风扇\n" +"您知道吗？OrcaSlicer可以支持空气过滤/排气风扇。" +# AI Translated #: resources/data/hints.ini: [hint:G-code window] msgid "" "G-code window\n" "You can turn on/off the G-code window by pressing the C key." msgstr "" -"G-code预览\n" -"您可以通过按下C键打开/关闭G-code预览窗口。" +"G-code窗口\n" +"您可以通过按下C键打开/关闭G-code窗口。" #: resources/data/hints.ini: [hint:Switch workspaces] msgid "" @@ -35474,13 +37187,14 @@ msgstr "" "延时摄影\n" "您知道吗？您可以每次打印时生成一段延时摄影。" +# AI Translated #: resources/data/hints.ini: [hint:Auto-Arrange] msgid "" "Auto-Arrange\n" "Did you know that you can auto-arrange all the objects in your project?" msgstr "" -"自动摆盘\n" -"您知道吗？您可以自动排列项目中的所有对象。" +"自动摆放\n" +"您知道吗？您可以自动摆放项目中的所有对象。" #: resources/data/hints.ini: [hint:Auto-Orient] msgid "" @@ -35490,29 +37204,32 @@ msgstr "" "自动朝向\n" "您知道吗，您只需单击鼠标，即可将对象旋转到适合的打印方向。" +# AI Translated #: resources/data/hints.ini: [hint:Lay on Face] msgid "" "Lay on Face\n" "Did you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the F key." msgstr "" -"放置在面部\n" -"您知道吗，您可以快速指定模型的底面，使其位于打印床上。选择“放置在面部”功能或按F键。" +"选择底面\n" +"您知道吗？您可以快速调整模型朝向，让它的某个面贴合热床。使用“选择底面”功能或按F键。" +# AI Translated #: resources/data/hints.ini: [hint:Object List] msgid "" "Object List\n" "Did you know that you can view all objects/parts in a list and change settings for each object/part?" msgstr "" "对象列表\n" -"您知道对象列表吗？您可以在其中的查看所有对象/部件，并更改每个对象/部件的设置。" +"您知道吗？您可以在列表中查看所有对象/零件，并更改每个对象/零件的设置。" +# AI Translated #: resources/data/hints.ini: [hint:Search Functionality] msgid "" "Search Functionality\n" "Did you know that you use the Search tool to quickly find a specific Orca Slicer setting?" msgstr "" "搜索功能\n" -"您知道吗？您可以使用搜索工具快速查找特定的逆戟鲸设置。" +"您知道吗？您可以使用搜索工具快速查找Orca Slicer的特定设置。" #: resources/data/hints.ini: [hint:Simplify Model] msgid "" @@ -35522,13 +37239,14 @@ msgstr "" "简化模型\n" "您知道吗？您可以使用简化三角面片功能减少网格中的三角形数量。右键单击模型，然后选择简化模型。" +# AI Translated #: resources/data/hints.ini: [hint:Slicing Parameter Table] msgid "" "Slicing Parameter Table\n" "Did you know that you can view all objects/parts on a table and change settings for each object/part?" msgstr "" "参数表格\n" -"您知道吗？您可以参数表格上的所有对象/部件，并更改每个对象/部件的设置。" +"您知道吗？您可以在参数表格中查看所有对象/零件，并更改每个对象/零件的设置。" #: resources/data/hints.ini: [hint:Split to Objects/Parts] msgid "" @@ -35538,14 +37256,16 @@ msgstr "" "分割成对象/零件\n" "您知道吗，您可以把一个大对象分割成多个小对象/零件以便着色或打印。" +# AI Translated #: resources/data/hints.ini: [hint:Subtract a Part] msgid "" "Subtract a Part\n" "Did you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer." msgstr "" -"减去一个部分\n" -"您知道吗，您可以使用负零件修改器从一个网格中减去另一个网格。这样，您就可以直接在逆戟鲸中创建易于调整大小的孔。" +"减去零件\n" +"您知道吗，您可以使用负零件修改器从一个网格中减去另一个网格。这样，您就可以直接在Orca Slicer中创建易于调整大小的孔。" +# AI Translated #: resources/data/hints.ini: [hint:STEP] msgid "" "STEP\n" @@ -35554,23 +37274,25 @@ msgid "" msgstr "" "STEP文件\n" "您知道吗，通过切片STEP文件而不是STL文件可以提高打印质量。\n" -"逆戟鲸支持切片STEP文件，提供比低分辨率STL更平滑的结果。试试看！" +"Orca Slicer支持切片STEP文件，提供比低分辨率STL更平滑的结果。试试看！" +# AI Translated #: resources/data/hints.ini: [hint:Z seam location] msgid "" "Z seam location\n" "Did you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!" msgstr "" "Z接缝位置\n" -"您知道吗，您可以自定义Z接缝的位置，甚至可以将其绘制在打印上，使其位于不太可见的位置。这样可以改善模型的整体外观。试试看！" +"您知道吗，您可以自定义Z接缝的位置，甚至可以直接在模型上绘制接缝，使其位于不太明显的位置。这样可以改善模型的整体外观。试试看！" +# AI Translated #: resources/data/hints.ini: [hint:Fine-tuning for flow rate] msgid "" "Fine-tuning for flow rate\n" "Did you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning." msgstr "" "流量微调\n" -"你知道吗，您可以微调流量，以获得更好看的打印效果。根据材料的不同，可以通过进行一些微调来提高打印模型的整体光洁度。" +"您知道吗，您可以微调流量，以获得更好看的打印效果。根据材料的不同，可以通过一些微调来提高打印模型的整体光洁度。" #: resources/data/hints.ini: [hint:Split your prints into plates] msgid "" @@ -35580,38 +37302,42 @@ msgstr "" "分盘打印\n" "您知道吗，您可以把一个有很多零件的模型安排到多个独立的分盘，然后打印出来，这将简化对所有零件的管理。" +# AI Translated #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer #: Height] msgid "" "Speed up your print with Adaptive Layer Height\n" "Did you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!" msgstr "" -"自适应层高度加速打印\n" -"您知道吗，您可以使用“自适应层高度”选项可以更快地打印模型。试试看！" +"使用自适应层高加速打印\n" +"您知道吗，您可以使用“自适应层高”选项更快地打印模型。试试看！" +# AI Translated #: resources/data/hints.ini: [hint:Support painting] msgid "" "Support painting\n" "Did you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it." msgstr "" "绘制支撑\n" -"您知道吗，您可以手动绘制添加/屏蔽支撑的位置，此功能使仅将支撑材料放置在实际需要的模型截面上变得容易。" +"您知道吗，您可以手动绘制添加/屏蔽支撑的位置。此功能可以让您轻松地只在模型真正需要的部位放置支撑材料。" +# AI Translated #: resources/data/hints.ini: [hint:Different types of supports] msgid "" "Different types of supports\n" "Did you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!" msgstr "" "支撑类型\n" -"您知道吗，有多种可选的支撑类型，树状支撑非常适合人物/动物模型，同时可以节耗材并提高打印速度。试试看！" +"您知道吗，有多种可选的支撑类型，树状支撑非常适合人物/动物模型，同时可以节省耗材丝并提高打印速度。试试看！" +# AI Translated #: resources/data/hints.ini: [hint:Printing Silk Filament] msgid "" "Printing Silk Filament\n" "Did you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results." msgstr "" -"打印丝绸耗材\n" -"你知道吗，丝绸耗材需要特别考虑才能成功打印。为了获得最佳效果，通常建议使用较高的温度和较低的速度。" +"打印丝绸耗材丝\n" +"您知道吗，丝绸耗材丝需要特别注意才能打印成功。为了获得最佳效果，通常建议使用较高的温度和较低的速度。" #: resources/data/hints.ini: [hint:Brim for better adhesion] msgid "" @@ -35629,30 +37355,34 @@ msgstr "" "为多个对象设置参数\n" "您知道吗，可以同时为所有选定对象设置切片参数。" +# AI Translated #: resources/data/hints.ini: [hint:Stack objects] msgid "" "Stack objects\n" "Did you know that you can stack objects as a whole one?" msgstr "" -"组合物体\n" -"你知道吗？你可以把多个对象组合为一个整体。" +"组合对象\n" +"您知道吗？您可以把多个对象组合为一个整体。" +# AI Translated #: resources/data/hints.ini: [hint:Flush into support/objects/infill] msgid "" "Flush into support/objects/infill\n" "Did you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?" msgstr "" "冲刷到支撑/对象/填充中\n" -"你知道吗？你可以在换料时将它们冲入支撑/对象/填充，以节省浪费的料丝。" +"您知道吗？您可以在换料时将耗材丝冲刷到支撑/对象/填充中，以减少耗材丝浪费。" +# AI Translated #: resources/data/hints.ini: [hint:Improve strength] msgid "" "Improve strength\n" "Did you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?" msgstr "" "提高强度\n" -"你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。" +"您知道吗？您可以使用更多的墙层数和更高的稀疏填充密度来提高模型的强度。" +# AI Translated #: resources/data/hints.ini: [hint:When do you need to print with the printer #: door opened] msgid "" @@ -35660,7 +37390,7 @@ msgid "" "Did you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki." msgstr "" "什么时候需要打开打印机门进行打印？\n" -"您知道吗，在较高封闭仓温度下打印较低温度的耗材时，打开打印机门可以减少挤出机/热端堵塞的概率。更多信息请参阅Wiki。" +"您知道吗，在较高腔体温度下打印较低温度的耗材丝时，打开打印机门可以减少挤出机/热端堵塞的概率。更多信息请参阅Wiki。" #: resources/data/hints.ini: [hint:Avoid warping] msgid ""