Update filament profiles to use arrays for cost, density, and max volumetric speed

Updated multiple filament profiles to convert fields such as filament_cost, filament_density, and filament_max_volumetric_speed from single values to arrays for consistency. Removed unnecessary fields from filament profiles to streamline data structure. This change enhances compatibility with the updated profile handling logic in the orca_filament_lib.py script.

resources/profiles/Creality/filament/Creality Generic ABS @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "15",
-    "filament_density": "1.08",
+    "filament_cost": [
+        "15"
+    ],
+    "filament_density": [
+        "1.08"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "35",
+    "filament_max_volumetric_speed": [
+        "35"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+    "temperature_vitrification": [
+        "110"
+    ],
     "textured_plate_temp": "90",
     "textured_plate_temp_initial_layer": "90"
 }

resources/profiles/Creality/filament/Creality Generic ASA @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "29",
-    "filament_density": "1.15",
+    "filament_cost": [
+        "29"
+    ],
+    "filament_density": [
+        "1.15"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "35",
+    "filament_max_volumetric_speed": [
+        "35"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+    "temperature_vitrification": [
+        "110"
+    ],
     "textured_plate_temp": "90",
     "textured_plate_temp_initial_layer": "90"
 }

resources/profiles/Creality/filament/Creality Generic PA @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "50",
-    "filament_density": "1.24",
+    "filament_cost": [
+        "50"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "2",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "8",
     "slow_down_min_speed": "5",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "108",
+    "temperature_vitrification": [
+        "108"
+    ],
     "textured_plate_temp": "45",
     "textured_plate_temp_initial_layer": "45"
 }

resources/profiles/Creality/filament/Creality Generic PETG @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "14",
-    "filament_density": "1.23",
+    "filament_cost": [
+        "14"
+    ],
+    "filament_density": [
+        "1.23"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "30",
+    "filament_max_volumetric_speed": [
+        "30"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "8",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "80",
+    "temperature_vitrification": [
+        "80"
+    ],
     "textured_plate_temp": "70",
     "textured_plate_temp_initial_layer": "70"
 }

resources/profiles/Creality/filament/Creality Generic PLA @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "20",
-    "filament_density": "1.24",
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "40",
+    "filament_max_volumetric_speed": [
+        "40"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+    "temperature_vitrification": [
+        "60"
+    ],
     "textured_plate_temp": "45",
     "textured_plate_temp_initial_layer": "45"
 }

resources/profiles/Creality/filament/Creality Generic TPU @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "20",
-    "filament_density": "1.26",
+    "filament_cost": [
+        "20"
+    ],
+    "filament_density": [
+        "1.26"
+    ],
     "filament_deretraction_speed": "30",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "2",
+    "filament_max_volumetric_speed": [
+        "2"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "8",
     "slow_down_min_speed": "5",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+    "temperature_vitrification": [
+        "60"
+    ],
     "textured_plate_temp": "45",
     "textured_plate_temp_initial_layer": "45"
 }

resources/profiles/Creality/filament/Creality Hyper ABS @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "15",
-    "filament_density": "1.08",
+    "filament_cost": [
+        "15"
+    ],
+    "filament_density": [
+        "1.08"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "60",
+    "filament_max_volumetric_speed": [
+        "60"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "110",
+    "temperature_vitrification": [
+        "110"
+    ],
     "textured_plate_temp": "90",
     "textured_plate_temp_initial_layer": "90"
 }

resources/profiles/Creality/filament/Creality Hyper PLA @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "30",
-    "filament_density": "1.24",
+    "filament_cost": [
+        "30"
+    ],
+    "filament_density": [
+        "1.24"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "50",
+    "filament_max_volumetric_speed": [
+        "50"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -94,7 +100,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "20",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+    "temperature_vitrification": [
+        "60"
+    ],
     "textured_plate_temp": "45",
     "textured_plate_temp_initial_layer": "45"
 }

resources/profiles/Creality/filament/Creality Hyper PLA-CF @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "32",
-    "filament_density": "1.27",
+    "filament_cost": [
+        "32"
+    ],
+    "filament_density": [
+        "1.27"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "40",
+    "filament_max_volumetric_speed": [
+        "40"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+    "temperature_vitrification": [
+        "60"
+    ],
     "textured_plate_temp": "45",
     "textured_plate_temp_initial_layer": "45"
 }

resources/profiles/Creality/filament/Creality Silk PLA @Ender-5Max-all.json

@@ -30,8 +30,12 @@
     "filament_cooling_final_speed": "3.4",
     "filament_cooling_initial_speed": "2.2",
     "filament_cooling_moves": "4",
-    "filament_cost": "22",
-    "filament_density": "1.25",
+    "filament_cost": [
+        "22"
+    ],
+    "filament_density": [
+        "1.25"
+    ],
     "filament_deretraction_speed": "nil",
     "filament_diameter": "1.75",
     "filament_end_gcode": [
@@ -42,7 +46,9 @@
     "filament_load_time": "0",
     "filament_loading_speed": "28",
     "filament_loading_speed_start": "3",
-    "filament_max_volumetric_speed": "20",
+    "filament_max_volumetric_speed": [
+        "20"
+    ],
     "filament_minimal_purge_on_wipe_tower": "15",
     "filament_multitool_ramming": "0",
     "filament_multitool_ramming_flow": "10",
@@ -93,7 +99,9 @@
     "slow_down_layer_time": "5",
     "slow_down_min_speed": "10",
     "support_material_interface_fan_speed": "-1",
-    "temperature_vitrification": "60",
+    "temperature_vitrification": [
+        "60"
+    ],
     "textured_plate_temp": "45",
     "textured_plate_temp_initial_layer": "45"
 }