diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index db39cb7513..cdf9a7627f 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -111,6 +111,10 @@ { "name": "Creality K1 SE", "sub_path": "machine/Creality K1 SE.json" + }, + { + "name": "Creality K2 Plus", + "sub_path": "machine/Creality K2 Plus.json" } ], "process_list": [ @@ -250,6 +254,14 @@ "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3", "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json" }, + { + "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json" + }, { "name": "0.10mm HighDetail @Creality CR-6 0.4.json", "sub_path": "process/0.10mm HighDetail @Creality CR-6 0.4.json" @@ -266,6 +278,10 @@ "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3", "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json" }, + { + "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json" + }, { "name": "0.12mm Detail @Creality Ender3 0.2", "sub_path": "process/0.12mm Fine @Creality Ender3 0.2.json" @@ -374,6 +390,22 @@ "name": "0.12mm Fine @Creality K1Max (0.4 nozzle)", "sub_path": "process/0.12mm Fine @Creality K1Max (0.4 nozzle).json" }, + { + "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json" + }, { "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.5", "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json" @@ -534,6 +566,22 @@ "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)", "sub_path": "process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json" }, + { + "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle", + "sub_path": "process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json" + }, { "name": "0.20mm Standard @Creality CR10V2", "sub_path": "process/0.20mm Standard @Creality CR10V2.json" @@ -702,6 +750,18 @@ "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)", "sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json" }, + { + "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json" + }, { "name": "0.20mm Fast @Creality K1 SE 0.4", "sub_path": "process/0.20mm Fast @Creality K1 SE 0.4.json" @@ -834,6 +894,18 @@ "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8", "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json" }, + { + "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json" + }, { "name": "0.28mm SuperDraft @Creality Ender3 0.2", "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.2.json" @@ -890,6 +962,18 @@ "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0", "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json" }, + { + "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle", + "sub_path": "process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle", + "sub_path": "process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle", + "sub_path": "process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json" + }, { "name": "0.32mm Chunky @Creality CR-6 0.6", "sub_path": "process/0.32mm Chunky @Creality CR-6 0.6.json" @@ -1187,6 +1271,46 @@ { "name": "Creality Generic TPU @K1-all", "sub_path": "filament/Creality Generic TPU @K1-all.json" + }, + { + "name": "Creality Generic ABS @K2-all", + "sub_path": "filament/Creality Generic ABS @K2-all.json" + }, + { + "name": "Creality Generic ASA @K2-all", + "sub_path": "filament/Creality Generic ASA @K2-all.json" + }, + { + "name": "Creality Generic PETG @K2-all", + "sub_path": "filament/Creality Generic PETG @K2-all.json" + }, + { + "name": "Creality Generic PLA @K2-all", + "sub_path": "filament/Creality Generic PLA @K2-all.json" + }, + { + "name": "Creality Generic PLA High Speed @K2-all", + "sub_path": "filament/Creality Generic PLA High Speed @K2-all.json" + }, + { + "name": "Creality Generic PLA Matte @K2-all", + "sub_path": "filament/Creality Generic PLA Matte @K2-all.json" + }, + { + "name": "Creality Generic PLA Silk @K2-all", + "sub_path": "filament/Creality Generic PLA Silk @K2-all.json" + }, + { + "name": "Creality Generic TPU @K2-all", + "sub_path": "filament/Creality Generic TPU @K2-all.json" + }, + { + "name": "Creality Generic PLA-CF @K2-all", + "sub_path": "filament/Creality Generic PLA-CF @K2-all.json" + }, + { + "name": "Creality Generic PA-CF @K2-all", + "sub_path": "filament/Creality Generic PA-CF @K2-all.json" } ], "machine_list": [ @@ -1434,6 +1558,10 @@ "name": "Creality K1C 0.8 nozzle", "sub_path": "machine/Creality K1C 0.8 nozzle.json" }, + { + "name": "Creality K1 SE 0.4 nozzle", + "sub_path": "machine/Creality K1 SE 0.4 nozzle.json" + }, { "name": "Creality K1 Max (0.4 nozzle)", "sub_path": "machine/Creality K1 Max (0.4 nozzle).json" @@ -1447,8 +1575,20 @@ "sub_path": "machine/Creality K1 Max (0.8 nozzle).json" }, { - "name": "Creality K1 SE 0.4 nozzle", - "sub_path": "machine/Creality K1 SE 0.4 nozzle.json" + "name": "Creality K2 Plus 0.2 nozzle", + "sub_path": "machine/Creality K2 Plus 0.2 nozzle.json" + }, + { + "name": "Creality K2 Plus 0.4 nozzle", + "sub_path": "machine/Creality K2 Plus 0.4 nozzle.json" + }, + { + "name": "Creality K2 Plus 0.6 nozzle", + "sub_path": "mahcine/Creality K2 Plus 0.6 nozzle.json" + }, + { + "name": "Creality K2 Plus 0.8 nozzle", + "sub_path": "machine/Creality K2 Plus 0.8 nozzle.json" } ] } \ No newline at end of file diff --git a/resources/profiles/Creality/Creality K2 Plus_cover.png b/resources/profiles/Creality/Creality K2 Plus_cover.png new file mode 100644 index 0000000000..30bc356ba9 Binary files /dev/null and b/resources/profiles/Creality/Creality K2 Plus_cover.png differ diff --git a/resources/profiles/Creality/creality_k2plus_buildplate_model.stl b/resources/profiles/Creality/creality_k2plus_buildplate_model.stl new file mode 100644 index 0000000000..ea2d8b07e8 Binary files /dev/null and b/resources/profiles/Creality/creality_k2plus_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_k2plus_buildplate_texture.png b/resources/profiles/Creality/creality_k2plus_buildplate_texture.png new file mode 100644 index 0000000000..4dcf16e604 Binary files /dev/null and b/resources/profiles/Creality/creality_k2plus_buildplate_texture.png differ diff --git a/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json new file mode 100644 index 0000000000..4a033b3780 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "setting_id": "GFSA04_CREALITY_00", + "name": "Creality Generic ABS @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ABS", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json new file mode 100644 index 0000000000..8cb657bdd0 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "setting_id": "GFSA04_00", + "name": "Creality Generic ASA @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic ASA", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json new file mode 100644 index 0000000000..3e0963cc49 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Creality Generic PA-CF @K2-all", + "inherits": "Creality Generic PA-CF", + "from": "system", + "setting_id": "GFSN99_01", + "instantiation": "true", + "nozzle_temperature_initial_layer": [ + "280" + ], + "nozzle_temperature": [ + "280" + ], + "fan_min_speed": [ + "30" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json new file mode 100644 index 0000000000..efe3f28bb7 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "setting_id": "GFSG99_00", + "name": "Creality Generic PETG @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PETG", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "cool_plate_temp": [ + "70" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature": [ + "250" + ], + "fan_max_speed": [ + "80" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json new file mode 100644 index 0000000000..472eef9221 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "setting_id": "GFSL99_00", + "name": "Creality Generic PLA @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "4" + ], + "cool_plate_temp": [ + "50" + ], + "eng_plate_temp": [ + "50" + ], + "hot_plate_temp": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA High Speed @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @K2-all.json new file mode 100644 index 0000000000..e6572ec13d --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA High Speed @K2-all.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "setting_id": "GFSL95_00", + "name": "Creality Generic PLA High Speed @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K2-all", + "filament_max_volumetric_speed": [ + "23" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Matte @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Matte @K2-all.json new file mode 100644 index 0000000000..354200f89d --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA Matte @K2-all.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "setting_id": "GFSL05_00", + "name": "Creality Generic PLA Matte @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K2-all", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA Silk @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA Silk @K2-all.json new file mode 100644 index 0000000000..4f3c3567fa --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA Silk @K2-all.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA Silk @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA @K2-all", + "filament_max_volumetric_speed": [ + "10" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic PLA-CF @K2-all.json b/resources/profiles/Creality/filament/Creality Generic PLA-CF @K2-all.json new file mode 100644 index 0000000000..e76726af3f --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic PLA-CF @K2-all.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "setting_id": "GFSL96_00", + "name": "Creality Generic PLA-CF @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic PLA-CF", + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json new file mode 100644 index 0000000000..21b4e547a3 --- /dev/null +++ b/resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "setting_id": "GFU99_CREALITY_00", + "name": "Creality Generic TPU @K2-all", + "from": "system", + "instantiation": "true", + "inherits": "Creality Generic TPU", + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature": [ + "220" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "slow_down_layer_time": [ + "8" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle", + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/filament/Creality Generic TPU.json b/resources/profiles/Creality/filament/Creality Generic TPU.json index ac48f2d032..ff93417668 100644 --- a/resources/profiles/Creality/filament/Creality Generic TPU.json +++ b/resources/profiles/Creality/filament/Creality Generic TPU.json @@ -16,7 +16,7 @@ "Creality K1 Max (0.4 nozzle)", "Creality K1 Max (0.6 nozzle)", "Creality K1 Max (0.8 nozzle)", - "Creality Sermoon V1 0.4 nozzle", + "Creality Sermoon V1 0.4 nozzle", "Creality CR-10 SE 0.2 nozzle", "Creality CR-10 SE 0.4 nozzle", "Creality CR-10 SE 0.6 nozzle", diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000000..a83bd0bab7 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.2 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "Creality Generic PLA @K2-all", + "nozzle_diameter": [ + "0.2" + ], + "printer_variant": "0.2", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "scan_first_layer": "0", + "thumbnails_format":"PNG", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..1989658e2b --- /dev/null +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.4 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "Creality Generic PLA @K2-all", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "scan_first_layer": "0", + "thumbnails_format":"PNG", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000000..744b588116 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.6 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "Creality Generic PLA @K2-all", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "scan_first_layer": "0", + "thumbnails_format":"PNG", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000000..c83c071c56 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "machine", + "setting_id": "GM001", + "name": "Creality K2 Plus 0.8 nozzle", + "from": "system", + "instantiation": "true", + "inherits": "fdm_creality_common", + "printer_model": "Creality K2 Plus", + "gcode_flavor": "klipper", + "default_print_profile": "Creality Generic PLA @K2-all", + "nozzle_diameter": [ + "0.8" + ], + "printer_variant": "0.8", + "printable_area": [ + "0x0", + "350x0", + "350x350", + "0x350" + ], + "printable_height": "350", + "nozzle_type": "hardened_steel", + "auxiliary_fan": "1", + "support_air_filtration": "1", + "support_multi_bed_types": "0", + "machine_max_acceleration_e": [ + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_jerk_e": [ + "10", + "10" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Creality", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "0.5" + ], + "retract_length_toolchange": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "extruder_clearance_height_to_lid": "118", + "extruder_clearance_height_to_rod": "24", + "extruder_clearance_radius": "64", + "z_hop": [ + "0.4" + ], + "wipe_distance": [ + "1" + ], + "single_extruder_multi_material": "1", + "manual_filament_change": "0", + "default_filament_profile": [ + "Creality Generic PLA @K1-all" + ], + "machine_start_gcode":"M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F1500\nG1 X150 Y0 E15 F1500\nG92 E0\nG1 Z1 F600", + "machine_end_gcode": "END_PRINT", + "machine_pause_gcode": "PAUSE", + "scan_first_layer": "0", + "thumbnails_format":"PNG", + "thumbnails": [ + "96x96", + "300x300" + ] +} \ No newline at end of file diff --git a/resources/profiles/Creality/machine/Creality K2 Plus.json b/resources/profiles/Creality/machine/Creality K2 Plus.json new file mode 100644 index 0000000000..4c96122cb9 --- /dev/null +++ b/resources/profiles/Creality/machine/Creality K2 Plus.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Creality K2 Plus", + "model_id": "Creality-K2-Plus", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "Creality", + "bed_model": "creality_k2plus_buildplate_model.stl", + "bed_texture": "creality_k2plus_buildplate_texture.png", + "hotend_model": "", + "default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000000..0571ea5421 --- /dev/null +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_spacing": "0.15", + "ironing_pattern": "zig-zag", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.08", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..71993752ad --- /dev/null +++ b/resources/profiles/Creality/process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "7", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "350", + "interface_shells": "0", + "ironing_flow": "8", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.08", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "350", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000000..13c5307423 --- /dev/null +++ b/resources/profiles/Creality/process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_spacing": "0.15", + "ironing_pattern": "zig-zag", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.1", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000000..785deb1db8 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_spacing": "0.15", + "ironing_pattern": "zig-zag", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..eb2d3e1fa2 --- /dev/null +++ b/resources/profiles/Creality/process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.12", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "6", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.2 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.2 nozzle.json new file mode 100644 index 0000000000..8d191b5895 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.2 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.2 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.22", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.25", + "infill_wall_overlap": "30", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_spacing": "0.15", + "ironing_pattern": "zig-zag", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.14", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.25", + "inner_wall_speed": "150", + "wall_loops": "4", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.2", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.22", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..730f08d6f1 --- /dev/null +++ b/resources/profiles/Creality/process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "300", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.16", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000000..4e8351571b --- /dev/null +++ b/resources/profiles/Creality/process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.18", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..f7f5e53497 --- /dev/null +++ b/resources/profiles/Creality/process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "270", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.2", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000000..0728485e86 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..2efbf5cc46 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "250", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000000..ced87afd91 --- /dev/null +++ b/resources/profiles/Creality/process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.24", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json new file mode 100644 index 0000000000..df24ca69ae --- /dev/null +++ b/resources/profiles/Creality/process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "50", + "internal_bridge_speed": "150%", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.42", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "2000", + "initial_layer_line_width": "0.5", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "60", + "gap_infill_speed": "250", + "infill_combination": "0", + "sparse_infill_line_width": "0.45", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "200", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.28", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_speed": "250", + "spiral_mode": "0", + "initial_layer_infill_speed": "105", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.4", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.42", + "top_surface_acceleration": "5000", + "top_surface_speed": "200", + "top_shell_layers": "5", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "1", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "40", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000000..65b3f92370 --- /dev/null +++ b/resources/profiles/Creality/process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.3", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000000..a7bddb29bc --- /dev/null +++ b/resources/profiles/Creality/process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.32", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000000..9bca3f975d --- /dev/null +++ b/resources/profiles/Creality/process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.36", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000000..b7d161415e --- /dev/null +++ b/resources/profiles/Creality/process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.4", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json new file mode 100644 index 0000000000..680a13d30b --- /dev/null +++ b/resources/profiles/Creality/process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.6 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.62", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.65", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.65", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.42", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.65", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.5", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.62", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000000..a5fee4225c --- /dev/null +++ b/resources/profiles/Creality/process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.48", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file diff --git a/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json new file mode 100644 index 0000000000..fc2071b046 --- /dev/null +++ b/resources/profiles/Creality/process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json @@ -0,0 +1,114 @@ +{ + "type": "process", + "setting_id": "GP004", + "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle", + "from": "system", + "inherits": "fdm_process_common_klipper", + "instantiation": "true", + "adaptive_layer_height": "0", + "reduce_crossing_wall": "0", + "max_travel_detour_distance": "0", + "bottom_surface_pattern": "monotonic", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_flow": "1", + "bridge_speed": "25", + "internal_bridge_speed": "70", + "brim_width": "5", + "brim_object_gap": "0.1", + "compatible_printers": [ + "Creality K2 Plus 0.8 nozzle" + ], + "print_sequence": "by layer", + "default_acceleration": "12000", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "100", + "outer_wall_acceleration": "5000", + "inner_wall_acceleration": "5000", + "wall_infill_order": "inner wall/outer wall/infill", + "line_width": "0.82", + "infill_direction": "45", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "crosshatch", + "internal_bridge_support_thickness": "0.8", + "initial_layer_acceleration": "500", + "initial_layer_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "40", + "gap_infill_speed": "50", + "infill_combination": "0", + "sparse_infill_line_width": "0.82", + "infill_wall_overlap": "30%", + "sparse_infill_speed": "120", + "interface_shells": "0", + "ironing_flow": "10", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.15", + "ironing_speed": "30", + "ironing_type": "no ironing", + "layer_height": "0.56", + "reduce_infill_retraction": "1", + "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "20", + "overhang_4_4_speed": "10", + "only_one_wall_top": "1", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "wall_loops": "2", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_speed": "150", + "spiral_mode": "0", + "initial_layer_infill_speed": "60", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "normal(auto)", + "support_style": "default", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.2", + "support_bottom_z_distance": "0.2", + "support_filament": "0", + "support_line_width": "0.6", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "2", + "support_interface_bottom_layers": "2", + "support_interface_spacing": "0.3", + "support_expansion": "0", + "support_interface_speed": "80", + "support_base_pattern": "default", + "support_base_pattern_spacing": "2.5", + "support_speed": "150", + "support_threshold_angle": "30", + "support_object_xy_distance": "0.35", + "tree_support_branch_diameter": "2", + "tree_support_branch_angle": "45", + "tree_support_wall_count": "1", + "detect_thin_wall": "0", + "top_surface_pattern": "monotonicline", + "top_surface_line_width": "0.82", + "top_surface_acceleration": "2000", + "top_surface_speed": "100", + "top_shell_layers": "4", + "top_shell_thickness": "0.8", + "travel_acceleration": "12000", + "travel_speed": "500", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "gcode_label_objects": "0" +} \ No newline at end of file