mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-03 05:41:10 +00:00
Merge upstream updates into reviewed U1 work
Integrate upstream commit 301f2ecba3 while retaining the U1 high-flow profiles and nozzle-selection behavior.
Co-authored-by: Codex <noreply@openai.com>
This commit is contained in:
Eric McCann
@@ -21,6 +21,7 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
| Add a printer or nozzle; change models, variants, assets or extruder vectors | [machine-profiles.md](references/machine-profiles.md) |
|
||||
| Add a quality tier or tune a process | [process-profiles.md](references/process-profiles.md) |
|
||||
| Create a vendor bundle; diagnose loading or inheritance; migrate preset names | [vendor-bundle.md](references/vendor-bundle.md) |
|
||||
| Name a preset; check what a name must equal | [naming.md](references/naming.md) |
|
||||
| Change ids; diagnose AMS identity | [ids.md](references/ids.md), then `docs/HLSD/filament_id.md` for identity changes |
|
||||
| Review a profile diff | [review-checklist.md](references/review-checklist.md) |
|
||||
| Run checks, interpret failures, test another tree or verify in the app | [validation.md](references/validation.md) |
|
||||
@@ -44,7 +45,10 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
update in-tree references too. See [migration rules](references/vendor-bundle.md#renamed_from).
|
||||
6. **Compatibility uses exact printer variant names.** Every instantiated non-library filament
|
||||
needs a non-empty `compatible_printers` in its own file. Library fallbacks may omit it;
|
||||
library printer-specific tunes use a non-empty list. Keep same-product tunes disjoint.
|
||||
library printer-specific tunes use a non-empty list. One variant may be claimed by only one
|
||||
profile per filament product (`filament_id`); an overlap is resolved by moving the variant to the
|
||||
most specific preset, which is preferred over deleting a profile. See
|
||||
[one variant, one profile](references/filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product).
|
||||
7. **Preset values are strings or arrays of strings.** Use `"instantiation": "false"`, not `false`.
|
||||
Model `nozzle_diameter` is a `;`-separated string; machine `nozzle_diameter` is an array.
|
||||
Wrong types can abort loading; see [failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius).
|
||||
@@ -54,6 +58,9 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
9. **Run the full profile checks before reporting completion.** A vendor-scoped pass is only a
|
||||
development loop. Review also covers version bumps, assets, non-default processes and hardware
|
||||
tuning that CI cannot establish.
|
||||
10. **One all-printer preset per product; color is a runtime property, never a preset.** Never ship
|
||||
presets that differ only by color — CI accepts them, so this is a review call. See
|
||||
[color is a runtime property](references/filament-profiles.md#color-is-a-runtime-property).
|
||||
|
||||
## Creating or modifying a profile
|
||||
|
||||
@@ -87,7 +94,8 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
```
|
||||
|
||||
On Windows use `py -3` instead of `python3`, and `scripts\check_profile.bat -Vendor "<Vendor>"`
|
||||
/ `scripts\check_profile.bat`. Logs: `.test/check_profiles/logs/<check>.log`.
|
||||
/ `scripts\check_profile.bat`. Logs land in a per-user cache dir (see
|
||||
[validation.md](references/validation.md)).
|
||||
Id checks remain tree-wide under `--vendor`; filament-only bundles skip the default slice check.
|
||||
See [validation.md](references/validation.md) for flags, coverage and error remedies.
|
||||
5. **Verify the changed behavior.** Slice newly added non-default processes explicitly, and
|
||||
@@ -102,6 +110,7 @@ Paths below are relative to this skill. Commands run from the repository root.
|
||||
| A setting has no effect | Key spelling/type, `handle_legacy`, or a config key placed on a `machine_model` |
|
||||
| A preset exists but is not selectable | Index registration, `instantiation`, installation and compatibility |
|
||||
| A filament is missing, duplicated, or matches the wrong spool | [Compatibility and alias shadowing](references/filament-profiles.md#compatible_printers); [ids](references/ids.md) |
|
||||
| Presets differ only by color, or an all-printer library preset lacks `@System` | [Color is a runtime property](references/filament-profiles.md#color-is-a-runtime-property) |
|
||||
| A bed temperature is ignored | [Plate-specific temperature keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) |
|
||||
| A change is absent from the running app | Version bump and [installed profile location](references/validation.md#testing-in-the-app) |
|
||||
| A check fails | [Error → remedy](references/validation.md#error--remedy) |
|
||||
|
||||
@@ -52,6 +52,15 @@ a brand means adding a folder here; the folder name is a directory label only
|
||||
collection, so there is no duplicate-name error.
|
||||
- You may inherit from an instantiated preset as well as from a base; it is common.
|
||||
|
||||
## Color is a runtime property
|
||||
|
||||
`filament_id` identifies a product, not a color; filament sync/AMS reads the color from the spool at
|
||||
runtime. A product ships one all-printer preset and the color is chosen at runtime — never a sibling
|
||||
preset that differs only by color. A material family (PLA vs PLA Matte vs PLA Silk) is a new product; a
|
||||
color is not. A printer tune keeps the product alias and does not multiply per color either.
|
||||
|
||||
CI does not catch this — per-color presets pass `check` — so it is a review call.
|
||||
|
||||
## The two most common contributions
|
||||
|
||||
**A printer vendor tuning a generic.** Keep the `Generic X` base name so the alias shadows the library
|
||||
@@ -103,6 +112,57 @@ name.
|
||||
- Copying a base's full printer list onto a nozzle-specific variant produces duplicate combobox entries —
|
||||
a real shipped bug twice over.
|
||||
|
||||
## Overlapping coverage: one variant, one profile per product
|
||||
|
||||
`filament_id` is the **product** key, not the preset key — every variant of one product shares it
|
||||
(`<filament_vendor>/<filament_type>/<name-before-@>`). So if one printer variant appears in the
|
||||
`compatible_printers` of two presets of that product, the slicer cannot tell them apart at AMS match time.
|
||||
The C++ validator reports `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"`.
|
||||
`orca_profile_tool.py check` does **not** see it and passes. Resolve the overlap by **specificity**: keep
|
||||
the variant on the most specific profile and remove it from every more general one. Deleting a profile is
|
||||
the least preferred fix — moving coverage keeps the tune that users rely on.
|
||||
|
||||
Judge specificity from the profile's `compatible_printers` — how many variants it actually covers — and
|
||||
use the name only as a secondary, easily-vague hint; decide by the lists, with a best judgement call on
|
||||
the name. Naming conventions differ by vendor: BBL's is the reference (`@<Vendor> <Model>` for a whole
|
||||
model, `@<Vendor> <Model> <nozzle> nozzle` for one variant, `@<Vendor>` for a vendor-wide generic), but
|
||||
others vary (`@<printer model>`, a printer serial, or Creality's `@<Model>-all`). A name never overrides
|
||||
the list — see [preset naming](naming.md) for the shapes.
|
||||
|
||||
Specificity, most to least:
|
||||
|
||||
1. **Variant-specialized** — lists a single printer variant (BBL-style
|
||||
`... @<Vendor> <Model> <nozzle> nozzle`).
|
||||
2. **Model-specialized** — lists the variants of one printer model (BBL-style `... @<Vendor> <Model>`).
|
||||
It should cover every variant of its model, not only the nozzle it was authored for.
|
||||
3. **Family / series** — lists variants spanning a printer family or series.
|
||||
4. **Generic / catch-all** — vendor-wide, covering many unrelated models (often the bare
|
||||
`Generic <mat> @<Vendor>`).
|
||||
|
||||
Rules:
|
||||
|
||||
- A model-specialized profile is extended to **all** variants of its model, and each variant it thereby
|
||||
starts covering is removed from the family and generic profiles that also listed it — including variants
|
||||
that had no overlap before. Apply it per nozzle, not just 0.4.
|
||||
- Apply it **per product**: trim only the material that has a specialized profile from the generic; a
|
||||
material whose product has no specialized profile keeps the variant in the generic.
|
||||
- Never strip coverage a variant has nowhere else to get. If a variant has no variant-level specialized
|
||||
profile, the next level down keeps it; when the model has specialized profiles, the model-level one wins
|
||||
over the family/generic.
|
||||
- Moving coverage is preferred over deleting. If a profile must be deleted, remove the more general
|
||||
one, not the specialized profile that carries the tune.
|
||||
- After moving coverage, repoint the affected `default_filament_profile` (machine) and clean the model's
|
||||
`default_materials`: they should name the most specific profile that covers the variant, and should not
|
||||
keep generic entries that no longer cover the model. This rule applies equally when adding or fixing
|
||||
defaults.
|
||||
|
||||
Multiple profiles of one product with **disjoint** `compatible_printers` is the intended end state.
|
||||
Adding coverage to the specialized profile and removing it from the generic is the preferred direction.
|
||||
|
||||
**Detection caveat:** `orca_profile_tool.py check` is blind to this; only the C++ validator behind the full
|
||||
`./scripts/check_profile.sh` reports it (`validate_system`). Always confirm with that, not the vendor-scoped
|
||||
loop.
|
||||
|
||||
## Alias shadowing
|
||||
|
||||
A printer-specific filament in either the library or a vendor bundle supersedes the library fallback
|
||||
|
||||
@@ -0,0 +1,65 @@
|
||||
# Preset naming
|
||||
|
||||
A preset's `name` is the loader's key, not decoration. The index registers it; `inherits`,
|
||||
`compatible_printers` and the `default_*` keys reference it by the exact string; `renamed_from` depends
|
||||
on it; and `setting_id` / `filament_id` hash it (see [ids.md](ids.md)). Two presets of one type in a
|
||||
bundle may not share a name (`check_preset_name_uniqueness`). Treat a name change as an identity change,
|
||||
not a relabel.
|
||||
|
||||
Naming is convention only where the loader does not parse it. What the loader actually acts on:
|
||||
|
||||
| Type | Shape | Acted on |
|
||||
| --- | --- | --- |
|
||||
| `machine_model` | `<Model>` | the exact string, named by a variant's `printer_model` |
|
||||
| `machine` | `<Model> <nozzle> nozzle` | the exact string, named by `compatible_printers`; `printer_variant` must equal a nozzle diameter |
|
||||
| `process` | `<lh>mm <Quality> @<target>` | the exact string when referenced or selected; the `@<target>` half is a label |
|
||||
| `filament` | `<Product> @<target>` | text before the first `@` is the **alias**, used for shadowing; the rest is a label |
|
||||
|
||||
## `machine_model`
|
||||
|
||||
`<Model>` — the vendor-prefixed model name (`Bambu Lab X1 Carbon`, `Creality K1`, `Prusa CORE One`). A
|
||||
variant names it verbatim in `printer_model`; a mismatch makes the variant invalid. `check_name_consistency`
|
||||
forces the index entry to equal the file's `name`, and the variant's `printer_model` targets this string
|
||||
([A `machine_model` is not a config preset](machine-profiles.md#a-machine_model-is-not-a-config-preset)).
|
||||
It is also the `<Model>_cover.png` and bed-asset stem.
|
||||
|
||||
## `machine` (variant)
|
||||
|
||||
`<Model> <nozzle> nozzle` is near-universal (`Bambu Lab X1 Carbon 0.4 nozzle`). `printer_variant` holds
|
||||
the bare nozzle (`0.4`) and must be an exact member of the model's `nozzle_diameter` list — the hard
|
||||
rules are in [The `machine` variant](machine-profiles.md#the-machine-variant). Casing varies
|
||||
(`nozzle` / `Nozzle`): match the bundle, not this page. A variant that is not nozzle-specific (a special
|
||||
toolhead, a multi-material build) may drop the suffix — still an exact reference. Bases are named
|
||||
`fdm_machine_common` / `fdm_<vendor>_common`.
|
||||
|
||||
## `process`
|
||||
|
||||
`<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
|
||||
quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
|
||||
usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
|
||||
list or condition.
|
||||
|
||||
## `filament`
|
||||
|
||||
`<Product> @<target>`. The product half is what `filament_id` hashes and what survives as the **alias** up
|
||||
to the first `@`; the target half is a label except for reserved forms:
|
||||
|
||||
- `@base` — a non-instantiated product root. `@base` is convention; a base is really identified by
|
||||
`instantiation: "false"` and no `setting_id` ([the three-part shape](filament-profiles.md#the-three-part-shape)).
|
||||
- `@System` — the OrcaFilamentLibrary selectable shim, and the convention for an all-printer product
|
||||
(`<Product> @System`, empty `compatible_printers`); not enforced, so a deviation is worth a review
|
||||
comment. The literal `Generic <mat> @System` is load-bearing for 3MF/project recovery, beyond the
|
||||
alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)).
|
||||
- `@<Vendor>`, `@<Vendor> <Model>`, `@<Vendor> <Model> <nozzle> nozzle` — printer tunes, BBL's shape.
|
||||
Other vendors differ (a bare model, a printer serial, Creality's `@<Model>-all`). Specificity is judged
|
||||
from `compatible_printers`, not the name
|
||||
([one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)).
|
||||
- Color is not part of the product name: `<Product> <Color>` presets are not authored; the color is
|
||||
chosen at runtime
|
||||
([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).
|
||||
|
||||
## Not the same as the filename
|
||||
|
||||
The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the
|
||||
file's `name`, and the filename should match `sub_path`; a mismatch that differs only in case breaks
|
||||
another platform ([cross-platform paths](validation.md#cross-platform-paths)).
|
||||
@@ -15,6 +15,7 @@ The table highlights gaps that need human review. What CI *does* run:
|
||||
| Whether the intended default survived compatibility selection | The sweep can select a different compatible preset |
|
||||
| A dangling `compatible_printers` inside an `instantiation: "false"` base | A base never becomes a `Preset`, so the reference check never sees it (a bad `inherits` in a base *is* caught) |
|
||||
| A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
|
||||
| A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
|
||||
| Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
|
||||
|
||||
## 1. Was the vendor `version` bumped?
|
||||
@@ -79,8 +80,15 @@ and written in the preset's own file — golden rule 6, with the flattened-vs-ow
|
||||
inherited or copied the base's full printer list, and for two presets of one product with overlapping
|
||||
lists — duplicate combobox entries and an ambiguous AMS match.
|
||||
|
||||
Two presets of one product (`filament_id`) must not share a variant. Resolve it by specificity: move the
|
||||
variant to the most specific preset and remove it from the more general ones — preferred over deleting a
|
||||
profile. Then repoint the machine's `default_filament_profile` and the model's `default_materials` at the
|
||||
profile that now covers it. See
|
||||
[one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product).
|
||||
|
||||
*Why:* real shipped bugs twice (`b7b3418baf` "showing up everywhere", `ff83aa41ef` duplicate Flashforge
|
||||
entries).
|
||||
entries). The Python `check` passes on an overlap; only the full `check_profile.sh` (`validate_system`)
|
||||
reports `Ambiguous AMS filament match`.
|
||||
|
||||
## 6. Model ↔ variant ↔ process consistency
|
||||
|
||||
@@ -128,7 +136,11 @@ numbers nobody measured.
|
||||
## 11. `default_materials` (checked by CI)
|
||||
|
||||
`check` fails on a `default_materials` / `default_filament_profile` name that resolves to no system
|
||||
filament, so a dangling entry no longer reaches review. Scope the run while working on one vendor:
|
||||
filament, so a dangling entry no longer reaches review. When compatibility moves between profiles of a
|
||||
product, the machine's `default_filament_profile` and the model's `default_materials` must be repointed at
|
||||
the most specific profile that still covers the variant, dropping generic entries that no longer apply —
|
||||
the same [specificity rule](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)
|
||||
applies when adding or fixing defaults. Scope the run while working on one vendor:
|
||||
|
||||
```bash
|
||||
python3 scripts/orca_profile_tool.py check --vendor "<Vendor>" # py -3 on Windows
|
||||
|
||||
@@ -20,8 +20,11 @@ default Windows client refuses to run a checked-out `.ps1` at all. The `.ps1` fi
|
||||
probing `py -3`, then `python`, then `python3`; run the tool by hand with `py -3` for the same reason.
|
||||
|
||||
Every check in the run happens even after an earlier one fails; the script exits non-zero if any did, and writes
|
||||
`.test/check_profiles/logs/<check>.log` plus, on failure, `.test/check_profiles/pr_comment.md` — the same
|
||||
report CI posts on the PR. A stale `.test/check_profiles/.lock` after a crash must be removed by hand.
|
||||
`logs/<check>.log` plus, on failure, `pr_comment.md` under a per-user cache dir — the same report CI posts on the PR.
|
||||
That dir is `~/Library/Caches/orca-profile-check` on macOS, `${XDG_CACHE_HOME:-~/.cache}/orca-profile-check` on Linux
|
||||
and `%LOCALAPPDATA%\orca-profile-check` on Windows; it is named apart from OrcaSlicer's own per-user dirs and sits
|
||||
outside the checkout, so every worktree shares one copy. `--work-dir` / `-WorkDir` overrides it. A stale `.lock`
|
||||
there after a crash must be removed by hand.
|
||||
|
||||
## The five checks
|
||||
|
||||
@@ -150,9 +153,10 @@ Two things it therefore does **not** enforce:
|
||||
|
||||
Built from `src/dev-utils/OrcaSlicer_profile_validator.cpp` (`-DORCA_TOOLS=ON`).
|
||||
Both scripts find a local build under `build*/` — `check_profile.sh` tries Release, RelWithDebInfo, then
|
||||
Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into
|
||||
`.test/check_profiles/validator`. Pass `--download` / `-Download` to match CI exactly, since a stale
|
||||
local build is used silently. Windows looks for `OrcaSlicer_profile_validator.exe`.
|
||||
Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into the
|
||||
`validator` subdirectory of the per-user cache dir (see above). Pass `--download` / `-Download` to
|
||||
match CI exactly, since a stale local build is used silently. Windows looks for
|
||||
`OrcaSlicer_profile_validator.exe`.
|
||||
|
||||
If your build lives somewhere else entirely, point at it with `--validator` / `-Validator`, or set
|
||||
`ORCA_PROFILE_VALIDATOR` (`$env:ORCA_PROFILE_VALIDATOR` in PowerShell).
|
||||
@@ -223,7 +227,7 @@ Keep stems tidy too, but a space immediately before `.json` is not a trailing pa
|
||||
| `references unknown compatible_printers "<p>"` | the printer was renamed or deleted; fix the reference |
|
||||
| `references renamed compatible_printers "<old>" (now "<new>")` | in-tree references must name the current preset; `renamed_from` does not excuse them |
|
||||
| `Filament preset "<f>" is missing compatible_printers setting` | non-library filaments need a non-empty list in their **own** file — the flattened-vs-own-key trap is in [filament-profiles.md](filament-profiles.md#compatible_printers) |
|
||||
| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint, or fix an `inherits` pointing at another material's `@base` |
|
||||
| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint by [specificity](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product) — the specialized profile keeps the variant, the general ones drop it; prefer this over deleting a profile — or fix an `inherits` pointing at another material's `@base`. `orca_profile_tool.py check` does not catch this; only `validate_system` here does |
|
||||
| `Layer height cannot exceed nozzle diameter.` / `Line width too small` | `Print::validate()` flow rules |
|
||||
| `[ERROR] … no <V>.json list references it, so it never loads` | `update-index`, or delete the file |
|
||||
| `[ERROR] … references it and it declares no profile type` | set the correct `type` explicitly, then `normalize` and `update-index` |
|
||||
|
||||
@@ -330,12 +330,13 @@ jobs:
|
||||
# sources are unchanged, so a re-run of the same commit would skip the
|
||||
# OrcaSlicer module and ship no test asset. A per-run value in that module's
|
||||
# env keeps it rebuilding; orca_deps stays cached, and the compiler cache
|
||||
# still serves the rebuild.
|
||||
- name: Inject commit hash and flatpak-builder cache buster into Flatpak manifest
|
||||
# still serves the rebuild. run-tests on the same module builds the test
|
||||
# binaries.
|
||||
- name: Inject commit hash, run-tests and cache buster into Flatpak manifest
|
||||
env:
|
||||
flatpak_builder_cache_buster: ${{ github.run_id }}-${{ github.run_attempt }}
|
||||
run: |
|
||||
sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n build-options:\n env:\n flatpak_builder_cache_buster: \"$flatpak_builder_cache_buster\"\n git_commit_hash: \"$git_commit_hash\"|}" \
|
||||
sed -i "/name: OrcaSlicer/{n;s|buildsystem: simple|buildsystem: simple\n run-tests: true\n build-options:\n env:\n flatpak_builder_cache_buster: \"$flatpak_builder_cache_buster\"\n git_commit_hash: \"$git_commit_hash\"|}" \
|
||||
scripts/flatpak/com.orcaslicer.OrcaSlicer.yml
|
||||
shell: bash
|
||||
# flatpak-builder's --ccache only wraps cc and gcc, and the manifest builds
|
||||
@@ -381,9 +382,6 @@ jobs:
|
||||
save-cache: false
|
||||
arch: ${{ matrix.variant.arch }}
|
||||
upload-artifact: false
|
||||
# run-tests fires the module's build-only test-commands; keep-build-dirs
|
||||
# retains the binaries for the packaging step below.
|
||||
run-tests: true
|
||||
keep-build-dirs: true
|
||||
# The build has just touched everything it can use, so an object untouched
|
||||
# for a week is dead, usually orphaned by a flag change.
|
||||
@@ -449,10 +447,13 @@ jobs:
|
||||
# the bounds checks are compiled in, so a stripped exe still catches them.
|
||||
find "$d/build_flatpak/tests" -type f -perm -u+x -exec strip --strip-unneeded {} + 2>/dev/null || true
|
||||
# At runtime the tests read tests/ (TEST_DATA_DIR), scripts/, and under
|
||||
# resources/ the shipped profiles (PROFILES_DIR) and the printers/ maps.
|
||||
# resources/ the shipped profiles (PROFILES_DIR), the printers/ maps, and
|
||||
# the icon SVGs (NativeCommands icon names are checked against them).
|
||||
find "$d" -mindepth 1 -maxdepth 1 -type d \
|
||||
! -name tests ! -name build_flatpak ! -name scripts ! -name resources -exec rm -rf {} +
|
||||
find "$d/resources" -mindepth 1 -maxdepth 1 ! -name profiles ! -name printers -exec rm -rf {} +
|
||||
find "$d/resources" -mindepth 1 -maxdepth 1 ! -name profiles ! -name printers ! -name images -exec rm -rf {} +
|
||||
# Only the SVGs are read; the png/ico/icns/gif assets are ~35MB of dead weight.
|
||||
find "$d/resources/images" -mindepth 1 -maxdepth 1 ! -name '*.svg' -exec rm -rf {} + 2>/dev/null || true
|
||||
tar -cf flatpak-test-asset.tar flatpak_app "$d"
|
||||
- name: Upload flatpak test asset
|
||||
uses: actions/upload-artifact@v7
|
||||
|
||||
@@ -448,9 +448,26 @@ jobs:
|
||||
|
||||
- name: Install nsis
|
||||
if: runner.os == 'Windows' && !vars.SELF_HOSTED
|
||||
shell: pwsh
|
||||
# The Chocolatey community feed intermittently 504s, and `choco install`
|
||||
# exits 0 when package resolution fails that way. Unchecked, the job then
|
||||
# builds for ~25 minutes before `cpack -G NSIS` reports a missing makensis.
|
||||
# Retry the install and verify makensis itself, so a real failure stops here.
|
||||
run: |
|
||||
dir "C:/Program Files (x86)/Windows Kits/10/Include"
|
||||
choco install nsis
|
||||
$nsisDir = Join-Path ${env:ProgramFiles(x86)} 'NSIS'
|
||||
$makensis = Join-Path $nsisDir 'makensis.exe'
|
||||
for ($attempt = 1; $attempt -le 3 -and -not (Test-Path $makensis); $attempt++) {
|
||||
if ($attempt -gt 1) { Start-Sleep -Seconds (15 * $attempt) }
|
||||
Write-Host "::group::choco install nsis (attempt $attempt)"
|
||||
choco install nsis --yes --no-progress
|
||||
Write-Host "::endgroup::"
|
||||
}
|
||||
if (-not (Test-Path $makensis)) {
|
||||
throw "NSIS install failed: $makensis not found after 3 attempts."
|
||||
}
|
||||
& $makensis /VERSION
|
||||
$nsisDir | Out-File -Append -FilePath $env:GITHUB_PATH -Encoding utf8
|
||||
|
||||
- name: Build slicer Win
|
||||
if: runner.os == 'Windows'
|
||||
|
||||
@@ -75,8 +75,6 @@ jobs:
|
||||
if [ -z "$base" ] || [ "$base" = "0000000000000000000000000000000000000000" ] || ! git cat-file -e "$base^{commit}" 2>/dev/null; then
|
||||
base="$head^"
|
||||
fi
|
||||
echo "Diffing $base..$head"
|
||||
|
||||
mapfile -t candidates < <(
|
||||
git diff --name-only "$base" "$head" -- resources/profiles \
|
||||
| sed -nE 's#^resources/profiles/([^/]+)/.*#\1#p; s#^resources/profiles/([^/]+)\.json$#\1#p' \
|
||||
@@ -95,7 +93,6 @@ jobs:
|
||||
done
|
||||
|
||||
if [ "${#vendors[@]}" -eq 0 ]; then
|
||||
echo "No changed vendor profiles in this push; nothing to publish."
|
||||
echo "vendors=" >> "$GITHUB_OUTPUT"
|
||||
exit 0
|
||||
fi
|
||||
@@ -138,13 +135,10 @@ jobs:
|
||||
done
|
||||
|
||||
if [ "${#unauthorized[@]}" -ne 0 ]; then
|
||||
echo "Changed vendor profiles are not covered by FOLDER_MERGERS: ${unauthorized[*]}"
|
||||
echo "No profile caches will be published for this push."
|
||||
echo "vendors=" >> "$GITHUB_OUTPUT"
|
||||
exit 0
|
||||
fi
|
||||
|
||||
printf 'Changed vendors: %s\n' "${vendors[*]}"
|
||||
echo "vendors=${vendors[*]}" >> "$GITHUB_OUTPUT"
|
||||
|
||||
- name: Resolve Orca version
|
||||
@@ -163,7 +157,6 @@ jobs:
|
||||
# OrcaCloud keys R2 on; orca_ver (X.Y.Z) is the asset-name prefix.
|
||||
echo "release_tag=$raw" >> "$GITHUB_OUTPUT"
|
||||
echo "orca_ver=$orca_ver" >> "$GITHUB_OUTPUT"
|
||||
echo "Orca version: release_tag=$raw asset_prefix=$orca_ver"
|
||||
|
||||
- name: Validate profile versions
|
||||
id: pver
|
||||
@@ -179,7 +172,6 @@ jobs:
|
||||
exit 1
|
||||
fi
|
||||
printf '%s\t%s\n' "$v" "$pv" >> "$RUNNER_TEMP/pver.tsv"
|
||||
echo "$v -> $pv"
|
||||
done
|
||||
|
||||
- name: Download generate_system_cache
|
||||
@@ -214,7 +206,6 @@ jobs:
|
||||
pv="$(awk -F'\t' -v v="$v" '$1==v{print $2}' "$RUNNER_TEMP/pver.tsv")"
|
||||
name="${orca_ver}_${v}_${pv}_${ts}.zip"
|
||||
( cd resources/profiles && zip -q -j "$out/$name" "$v.opc" )
|
||||
echo "packaged $name"
|
||||
done
|
||||
echo "dir=$out" >> "$GITHUB_OUTPUT"
|
||||
|
||||
|
||||
@@ -520,6 +520,28 @@ jobs:
|
||||
} catch (error) {
|
||||
core.warning(`Merged successfully, but dispatching build_all.yml failed: ${error.message}`);
|
||||
}
|
||||
// ---- re-kick the profile publish ----
|
||||
// Same reason as above: post_merge_profiles.yml is push-triggered, so a
|
||||
// GITHUB_TOKEN merge never starts it. workflow_dispatch skips the paths:
|
||||
// filter, so only dispatch when the PR actually touched profiles.
|
||||
const touchesProfiles = files.some((file) =>
|
||||
[file.filename, file.previous_filename]
|
||||
.filter(Boolean)
|
||||
.some((p) => p.startsWith('resources/profiles/'))
|
||||
);
|
||||
if (touchesProfiles) {
|
||||
try {
|
||||
await github.rest.actions.createWorkflowDispatch({
|
||||
owner,
|
||||
repo,
|
||||
workflow_id: 'post_merge_profiles.yml',
|
||||
ref: pr.base.ref
|
||||
});
|
||||
core.info(`Dispatched post_merge_profiles.yml on ${pr.base.ref}.`);
|
||||
} catch (error) {
|
||||
core.warning(`Merged successfully, but dispatching post_merge_profiles.yml failed: ${error.message}`);
|
||||
}
|
||||
}
|
||||
|
||||
label-profile:
|
||||
# Independent of the merge rules: any PR that changes only files inside
|
||||
@@ -529,7 +551,7 @@ jobs:
|
||||
&& github.event_name == 'pull_request_target'
|
||||
permissions:
|
||||
contents: read
|
||||
pull-requests: read
|
||||
pull-requests: write
|
||||
issues: write
|
||||
runs-on: ubuntu-latest
|
||||
timeout-minutes: 5
|
||||
@@ -636,7 +658,7 @@ jobs:
|
||||
&& github.event_name == 'pull_request_target'
|
||||
permissions:
|
||||
contents: read # delegatable subtree, for file modes
|
||||
pull-requests: read
|
||||
pull-requests: write
|
||||
issues: write # label + comment
|
||||
runs-on: ubuntu-latest
|
||||
timeout-minutes: 10
|
||||
|
||||
@@ -52,5 +52,4 @@ internal_docs/
|
||||
__pycache__/
|
||||
*.pyc
|
||||
*.opc
|
||||
/.test/
|
||||
docs/superpowers/
|
||||
@@ -1122,7 +1122,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
|
||||
${_out_dir}/swresample-5.dll
|
||||
${_out_dir}/swscale-8.dll
|
||||
${_out_dir}/avutil-59.dll
|
||||
PARENT_SCOPE
|
||||
)
|
||||
list(APPEND _dll_list ${_occt_staged})
|
||||
set(${output_dlls} ${_dll_list} PARENT_SCOPE)
|
||||
|
||||
Vendored
+3
-3
@@ -5,7 +5,7 @@
|
||||
#if defined (__GNUC__) && ! defined (__cplusplus)
|
||||
typedef unsigned long long t1;typedef t1*t2;
|
||||
-void g(){}
|
||||
+void g(int,t1 const*,t1,t2,t1 const*,int){}
|
||||
+void g(int a,t1 const*b,t1 c,t2 dd,t1 const*e,int ff){}
|
||||
void h(){}
|
||||
static __inline__ t1 e(t2 rp,t2 up,int n,t1 v0)
|
||||
{t1 c,x,r;int i;if(v0){c=1;for(i=1;i<n;i++){x=up[i];r=x+1;rp[i]=r;}}return c;}
|
||||
@@ -17,7 +17,7 @@
|
||||
#if defined (__GNUC__) && ! defined (__cplusplus)
|
||||
typedef unsigned long long t1;typedef t1*t2;
|
||||
-void g(){}
|
||||
+void g(int,t1 const*,t1,t2,t1 const*,int){}
|
||||
+void g(int a,t1 const*b,t1 c,t2 dd,t1 const*e,int ff){}
|
||||
void h(){}
|
||||
static __inline__ t1 e(t2 rp,t2 up,int n,t1 v0)
|
||||
{t1 c,x,r;int i;if(v0){c=1;for(i=1;i<n;i++){x=up[i];r=x+1;rp[i]=r;}}return c;}
|
||||
@@ -26,7 +26,7 @@
|
||||
#if defined (__GNUC__) && ! defined (__cplusplus)
|
||||
typedef unsigned long long t1;typedef t1*t2;
|
||||
-void g(){}
|
||||
+void g(int,t1 const*,t1,t2,t1 const*,int){}
|
||||
+void g(int a,t1 const*b,t1 c,t2 dd,t1 const*e,int ff){}
|
||||
void h(){}
|
||||
static __inline__ t1 e(t2 rp,t2 up,int n,t1 v0)
|
||||
{t1 c,x,r;int i;if(v0){c=1;for(i=1;i<n;i++){x=up[i];r=x+1;rp[i]=r;}}return c;}
|
||||
|
||||
Vendored
+1
@@ -15,6 +15,7 @@ orcaslicer_add_cmake_project(
|
||||
-DTBB_BUILD_SHARED=OFF
|
||||
-DTBB_BUILD_TESTS=OFF
|
||||
-DTBB_TEST=OFF
|
||||
-DTBB_DISABLE_HWLOC_AUTOMATIC_SEARCH=ON
|
||||
-DTBB_ENABLE_IPO=OFF
|
||||
-DCMAKE_INTERPROCEDURAL_OPTIMIZATION=OFF
|
||||
-DCMAKE_POSITION_INDEPENDENT_CODE=ON
|
||||
|
||||
@@ -0,0 +1,132 @@
|
||||
# Keyboard Shortcuts
|
||||
|
||||
## Why it exists
|
||||
|
||||
Key events arrive in several windows (the main frame's char hook, the 3D canvases, the
|
||||
gizmo manager and the object list), and the same keys are shown again in menu labels,
|
||||
toolbar tooltips, gizmo names and the shortcuts dialog. The registry is the one table all
|
||||
of them read. Each binding is defined once; dispatchers look key events up there, labels
|
||||
are derived from it, and a change the user makes updates all of them.
|
||||
|
||||
## Data model
|
||||
|
||||
`KeyChord` (`src/slic3r/GUI/KeyChord.hpp`) is one key press: the key code as
|
||||
`wxEVT_KEY_DOWN` reports it, plus the `wxMOD_*` modifiers held with it. It has two
|
||||
text forms. The canonical one (`Ctrl+Shift+S`) is platform-neutral and doubles as the wx
|
||||
accelerator string and the config format. The display one uses translated modifier
|
||||
names and the command and option glyphs on macOS. `KeyChord::from_event()` turns any wx
|
||||
key event into the same key code and modifiers, so a chord recorded in the dialog is
|
||||
equal to the chord a dispatcher builds from the key press.
|
||||
|
||||
`Shortcut` is the enum of every user-facing binding. `shortcut_table` in
|
||||
`src/slic3r/GUI/Shortcuts.cpp` gives each one a config key, a description, a context
|
||||
mask, a default chord, a `repeatable` flag and a `modifier_variants` flag, in the order
|
||||
the dialog lists them; a `static_assert` keeps the table and the enum in step.
|
||||
|
||||
`ShortcutRegistry` overlays the user's overrides on the defaults and keeps a
|
||||
chord-to-shortcut index for lookups. It reads and writes the `shortcuts` section of
|
||||
`AppConfig`. Only overrides are stored, so a default can change between releases
|
||||
without touching anyone's config; `none` records a shortcut the user unbound.
|
||||
|
||||
## Contexts
|
||||
|
||||
A key press is looked up in the context of the window that received it.
|
||||
|
||||
| Context | Dispatcher | Examples |
|
||||
|--------------|-----------------------------------------------------------|-------------------------------|
|
||||
| `Global` | `MainFrame`'s `wxEVT_CHAR_HOOK`, before any child sees it | New project, camera views |
|
||||
| `Plater` | `GLCanvas3D` of the 3D and assembly views | Arrange, gizmo activation |
|
||||
| `Preview` | `GLCanvas3D` of the G-code preview | One-layer mode, jump to layer |
|
||||
| `ObjectList` | the object list | Copy, delete, auto drop |
|
||||
| `Painting` | `GLGizmosManager` while a painting gizmo is open | Circle, sphere, fill tools |
|
||||
|
||||
A shortcut can belong to several contexts, which is how copy and paste are a single
|
||||
binding for the canvas and the object list. Two shortcuts can share a chord when their
|
||||
contexts do not overlap; `C` is the cut gizmo in the 3D view, the G-code window in the
|
||||
preview and the circle tool while painting. A Global chord is dispatched before every
|
||||
other context, so the dialog treats it as conflicting with all of them.
|
||||
|
||||
A Global shortcut has to include Ctrl or Alt or use a key that types nothing, since a
|
||||
bare printable key in the frame hook would swallow that character in every text field.
|
||||
The dialog refuses such chords and `ShortcutRegistry::load()` drops them from the config.
|
||||
Space counts as typing. The speed dial's default is the one bare Space, and
|
||||
`MainFrame` leaves it to a focused control that uses Space itself (text fields, buttons,
|
||||
combo boxes), so it opens the dial from the canvases and the tab strip only.
|
||||
|
||||
## Which event a chord matches
|
||||
|
||||
Letters, digits and special keys match on `wxEVT_KEY_DOWN`. Its key codes do not depend
|
||||
on the keyboard layout: the key labelled `Q` on an AZERTY keyboard and the key in the
|
||||
same position under a Cyrillic layout both report `Q`. Numpad keys fold onto their main
|
||||
keyboard equivalents, so `Ctrl+1` and `Ctrl+Numpad 1` are one binding.
|
||||
|
||||
Punctuation matches on `wxEVT_CHAR`, because only the char event knows which character
|
||||
a key produced under the active layout. `+` is Shift and `=` on a US keyboard and a key
|
||||
of its own on a German one, and the binding means the character in both cases. The
|
||||
canvas looks a key up on key-down first and, when nothing matched, once more on the char
|
||||
event, for punctuation chords only. The dialog records chords the same way: a printable
|
||||
non-alphanumeric key pressed with nothing but Shift is taken from the char event that
|
||||
follows.
|
||||
|
||||
wxGTK does not report key auto-repeat, so the canvases share one record of the keys
|
||||
seen going down and swallow the repeats of every shortcut not marked `repeatable`. Zoom
|
||||
and undo repeat, for example; a toggle such as Tab does not. The record is shared because
|
||||
a shortcut can move the focus to another canvas while its key is still held; a key
|
||||
released while no canvas had the focus is dropped on the next press.
|
||||
|
||||
A few shortcuts have `modifier_variants`: Shift or Ctrl added to their binding selects a
|
||||
step of the same action (1 mm and camera-space moves of the selection, five-step slider
|
||||
moves). Only a binding without Shift or Ctrl of its own has steps, so no two bindings
|
||||
share one. `ShortcutRegistry::match()` looks the exact chord up first and only then, when
|
||||
nothing is bound to it, looks for such a shortcut whose binding is the chord minus those
|
||||
modifiers, reporting which were added; a binding on Ctrl+Shift+key therefore wins over
|
||||
the combined step. The Shift and Ctrl steps themselves are reserved. `step_owner()` names
|
||||
the shortcut they belong to, the capture dialog refuses to assign them, and
|
||||
`conflicts()` reports exact chords only. A binding made before its key became a stepping
|
||||
key keeps its chord and shadows that one step. A move or rotation of the selection
|
||||
started from the keyboard runs until the key that started it is released, or the
|
||||
canvas loses focus, so a held key is one undo step.
|
||||
|
||||
## Labels
|
||||
|
||||
Menu labels, toolbar tooltips, gizmo names, the context menu and the shortcuts dialog
|
||||
read the registry, so a rebinding shows up in all of them. Each tracked menu item keeps
|
||||
its base label; `MainFrame::update_shortcut_labels()` appends the current binding
|
||||
again after an edit, which also installs the new wx accelerator.
|
||||
|
||||
A chord that is unsafe as a menu accelerator, meaning a bare printable key, is appended
|
||||
to the label as plain text so the menu cannot take it away from text fields. The macOS
|
||||
edit menu shows its clipboard and undo entries that way, because a system-menu key
|
||||
equivalent for Cmd+C would run instead of the text field's own copy.
|
||||
|
||||
On macOS the object list receives no key events at all, so its bindings are installed as
|
||||
a `wxAcceleratorTable`, regenerated from the registry after each edit.
|
||||
|
||||
## Editing
|
||||
|
||||
The shortcuts dialog has a page per context, each opening with a line that says when its
|
||||
keys apply. A page lists the shortcuts under the headings of `section_table`, with the
|
||||
fixed keys that cannot change (mouse buttons, the step modifiers, Esc, the digit keys
|
||||
that pick a filament) sorted into the same sections. The mouse drag rows describe the
|
||||
camera actions chosen in Preferences; their button opens Preferences > Control with that
|
||||
option scrolled into view and focused, instead of editing a key.
|
||||
Editing a row opens a capture dialog that records the next chord, names the shortcuts it
|
||||
would take the chord from, and on confirmation unbinds those and binds this one.
|
||||
Resetting a row asks the same question when its default is now held by another
|
||||
shortcut, so a reset cannot leave two shortcuts on one chord. Each change is written to
|
||||
the config at once and pushed to the menus, tooltips and accelerator tables through
|
||||
`GUI_App::on_shortcuts_changed()`. The dialog opens from the Help menu and Preferences >
|
||||
Control on the Global page, and from the `?` key on the page of the view that received it.
|
||||
|
||||
## Adding a shortcut
|
||||
|
||||
1. Add the enum value to `Shortcut` and its row to `shortcut_table`, in the position
|
||||
the dialog should list it; the row's section heading is the `section_table` entry
|
||||
above it, so a new section needs an entry there too. Pick a default that does not
|
||||
collide inside its contexts; the `[Shortcuts]` tests check every default against the
|
||||
others.
|
||||
2. Handle it in the dispatcher of its context: `MainFrame::handle_global_shortcut`,
|
||||
`GLCanvas3D::handle_shortcut`, `ObjectList::dispatch_shortcut`, or a gizmo's
|
||||
`on_tool_shortcut`. A gizmo that opens on a key sets `m_shortcut` in its constructor.
|
||||
3. Where the UI shows the key, ask the registry (`display()` for tooltips,
|
||||
`accelerator()` for menu labels); no label holds a literal key name.
|
||||
+3034
-208
File diff suppressed because it is too large
Load Diff
+3138
-267
File diff suppressed because it is too large
Load Diff
+3139
-265
File diff suppressed because it is too large
Load Diff
+3132
-261
File diff suppressed because it is too large
Load Diff
+3034
-208
File diff suppressed because it is too large
Load Diff
+3118
-250
File diff suppressed because it is too large
Load Diff
+3127
-256
File diff suppressed because it is too large
Load Diff
+3128
-257
File diff suppressed because it is too large
Load Diff
+3132
-258
File diff suppressed because it is too large
Load Diff
+3136
-265
File diff suppressed because it is too large
Load Diff
+3142
-268
File diff suppressed because it is too large
Load Diff
+3142
-268
File diff suppressed because it is too large
Load Diff
@@ -125,6 +125,7 @@ src/slic3r/GUI/ThermalPreconditioningDialog.hpp
|
||||
src/slic3r/GUI/Jobs/SLAImportJob.cpp
|
||||
src/slic3r/GUI/Jobs/UpgradeNetworkJob.cpp
|
||||
src/slic3r/GUI/AboutDialog.cpp
|
||||
src/slic3r/GUI/ActionRegistry.cpp
|
||||
src/slic3r/GUI/AMSMaterialsSetting.cpp
|
||||
src/slic3r/GUI/ExtrusionCalibration.cpp
|
||||
src/slic3r/GUI/AmsMappingPopup.cpp
|
||||
@@ -159,6 +160,7 @@ src/slic3r/GUI/SelectMachinePop.cpp
|
||||
src/slic3r/GUI/StatusPanel.cpp
|
||||
src/slic3r/GUI/Monitor.cpp
|
||||
src/slic3r/GUI/MsgDialog.cpp
|
||||
src/slic3r/GUI/NativeCommands.cpp
|
||||
src/slic3r/GUI/NotificationManager.hpp
|
||||
src/slic3r/GUI/NotificationManager.cpp
|
||||
src/slic3r/GUI/ObjectDataViewModel.cpp
|
||||
@@ -179,6 +181,8 @@ src/slic3r/GUI/PublishDialog.cpp
|
||||
src/slic3r/GUI/PublishSettingsDialog.cpp
|
||||
src/slic3r/GUI/SavePresetDialog.cpp
|
||||
src/slic3r/GUI/Search.cpp
|
||||
src/slic3r/GUI/SettingsIndex.cpp
|
||||
src/slic3r/GUI/SpeedDialDialog.cpp
|
||||
src/slic3r/GUI/Selection.cpp
|
||||
src/slic3r/GUI/SelectMachine.cpp
|
||||
src/slic3r/GUI/PrePrintChecker.cpp
|
||||
@@ -246,6 +250,7 @@ src/slic3r/GUI/TroubleshootDialog.cpp
|
||||
src/slic3r/Utils/3DPrinterOS.cpp
|
||||
src/slic3r/Utils/AstroBox.cpp
|
||||
src/slic3r/Utils/Duet.cpp
|
||||
src/slic3r/Utils/UltiMaker.cpp
|
||||
src/slic3r/Utils/FlashAir.cpp
|
||||
src/slic3r/Utils/MKS.cpp
|
||||
src/slic3r/Utils/Moonraker.cpp
|
||||
@@ -295,3 +300,5 @@ src/slic3r/GUI/CAD/DesignPanel.cpp
|
||||
src/slic3r/GUI/CAD/SketchInlineEditor.cpp
|
||||
src/slic3r/GUI/Gizmos/GLGizmoPrimitive.cpp
|
||||
src/slic3r/GUI/Gizmos/GLGizmoSketch.cpp
|
||||
src/slic3r/GUI/KeyChord.cpp
|
||||
src/slic3r/GUI/Shortcuts.cpp
|
||||
|
||||
+3130
-259
File diff suppressed because it is too large
Load Diff
+3149
-275
File diff suppressed because it is too large
Load Diff
+3140
-269
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
+3123
-246
File diff suppressed because it is too large
Load Diff
+3144
-270
File diff suppressed because it is too large
Load Diff
+3130
-259
File diff suppressed because it is too large
Load Diff
+3139
-268
File diff suppressed because it is too large
Load Diff
+3136
-265
File diff suppressed because it is too large
Load Diff
+3142
-268
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -0,0 +1,2 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16"><path d="M14.5,1.5v12a1,1,0,0,1-1,1H1.5a1,1,0,0,1-1-1V1.5a1,1,0,0,1,1-1h12a1,1,0,0,1,1,1Z" style="fill:none;stroke:#949494;stroke-linecap:round;stroke-linejoin:round"/><polyline points="4,5 6.5,7.5 4,10" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/><line x1="8" y1="10" x2="11" y2="10" style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"/></svg>
|
||||
|
After Width: | Height: | Size: 524 B |
@@ -0,0 +1 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 12 12"><path d="M11.5,5.5v5c0,.55-.45,1-1,1H1.5c-.55,0-1-.45-1-1V1.5C.5.95.95.5,1.5.5h5M3.5,6.5v2h2l5.59-5.59c.55-.55.55-1.45,0-2s-1.45-.55-2,0L3.5,6.5Z" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-linejoin:round;"/></svg>
|
||||
|
After Width: | Height: | Size: 340 B |
@@ -6,6 +6,7 @@
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin2",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
|
||||
"file_start_gcode": ";TIME:{print_time_sec}s",
|
||||
"machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}",
|
||||
"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
|
||||
"change_filament_gcode": "M600",
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "Anycubic",
|
||||
"version": "02.04.00.05",
|
||||
"version": "02.04.00.07",
|
||||
"force_update": "0",
|
||||
"description": "Anycubic configurations",
|
||||
"machine_model_list": [
|
||||
@@ -48,6 +48,10 @@
|
||||
"name": "Anycubic Kobra 3 Max",
|
||||
"sub_path": "machine/Anycubic Kobra 3 Max.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra 3 V2",
|
||||
"sub_path": "machine/Anycubic Kobra 3 V2.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra Max",
|
||||
"sub_path": "machine/Anycubic Kobra Max.json"
|
||||
@@ -102,6 +106,10 @@
|
||||
"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
|
||||
"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
|
||||
@@ -118,6 +126,10 @@
|
||||
"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
|
||||
"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
|
||||
@@ -142,6 +154,10 @@
|
||||
"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
|
||||
"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
|
||||
@@ -214,6 +230,10 @@
|
||||
"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
@@ -286,6 +306,10 @@
|
||||
"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
@@ -342,6 +366,10 @@
|
||||
"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
|
||||
@@ -370,6 +398,10 @@
|
||||
"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
@@ -426,6 +458,10 @@
|
||||
"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
|
||||
"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
|
||||
@@ -454,6 +490,10 @@
|
||||
"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
|
||||
"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
|
||||
@@ -477,6 +517,34 @@
|
||||
{
|
||||
"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
|
||||
"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
@@ -528,6 +596,10 @@
|
||||
"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -564,6 +636,10 @@
|
||||
"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -704,6 +780,10 @@
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -768,6 +848,22 @@
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -792,6 +888,22 @@
|
||||
"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json"
|
||||
@@ -800,6 +912,10 @@
|
||||
"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -824,10 +940,26 @@
|
||||
"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
|
||||
@@ -844,10 +976,30 @@
|
||||
"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -868,6 +1020,10 @@
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
|
||||
@@ -980,6 +1136,10 @@
|
||||
"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
|
||||
@@ -1016,6 +1176,22 @@
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
|
||||
@@ -1174,6 +1350,22 @@
|
||||
"name": "Anycubic Kobra 3 Max 0.8 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra Max 0.4 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"
|
||||
|
||||
Binary file not shown.
Binary file not shown.
|
Before Width: | Height: | Size: 6.2 KiB After Width: | Height: | Size: 37 KiB |
Binary file not shown.
File diff suppressed because one or more lines are too long
|
After Width: | Height: | Size: 19 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 457 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 149 KiB After Width: | Height: | Size: 36 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 33 KiB After Width: | Height: | Size: 44 KiB |
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"from": "system",
|
||||
"setting_id": "LXkKhWH9YcYPr3IT",
|
||||
"filament_id": "OF223rZv",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"5"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"5"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.05"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"25"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"90"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"from": "system",
|
||||
"setting_id": "cWBQa7XzDl3czIOs",
|
||||
"filament_id": "OF0yFLkY",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"5"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"15"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"1"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"30"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.04"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"15"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "suyxKj9qKLtpBhhU",
|
||||
"filament_id": "OFo6n2pB",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"5"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"15"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"80%"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"6"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"25"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
]
|
||||
}
|
||||
+69
@@ -0,0 +1,69 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "0uOqeEk5YgyZH4Yy",
|
||||
"filament_id": "OFo6n2pB",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
]
|
||||
}
|
||||
+42
@@ -0,0 +1,42 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "OOOjWFMFhP1fMhFf",
|
||||
"filament_id": "OFo6n2pB",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "uJRZr6orTVm79FeE",
|
||||
"filament_id": "OFmjN2bc",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.6"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.2 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "udLvkeYZ9Av7GkDz",
|
||||
"filament_id": "OFmjN2bc",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "W69H1Vca3f74FfYj",
|
||||
"filament_id": "OFmjN2bc",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "TR27JCwXxHeVhVHN",
|
||||
"filament_id": "OFmjN2bc",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "i0FTxiH68CKHiLLT",
|
||||
"filament_id": "OF80Qbpq",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+258
@@ -0,0 +1,258 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "XHa1HSjh0RjAo0nz",
|
||||
"filament_id": "OF80Qbpq",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_layer_time_BRASS": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+261
@@ -0,0 +1,261 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "iRVPFxNMEfkCDnMh",
|
||||
"filament_id": "OF80Qbpq",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_max_speed_BRASS": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed_BRASS": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "itTckVFabfsVbNBK",
|
||||
"filament_id": "OF5PtjTp",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"40"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "YLxoiuRDXBWLQYw4",
|
||||
"filament_id": "OFjVOWfJ",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "JwcCfY4XVCRJaDeS",
|
||||
"filament_id": "OFCSyK66",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "Sjw7irNgwCZMfWS3",
|
||||
"filament_id": "OFCSyK66",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "HeQwxU4T2W1V0LM3",
|
||||
"filament_id": "OFCSyK66",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "H3PIqeTzjvtFQXYv",
|
||||
"filament_id": "OFIE3vOf",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "4zmGMIi6jHJhU4c6",
|
||||
"filament_id": "OF5F0S66",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "wLkJ1CJgdWnT4NoJ",
|
||||
"filament_id": "OF5F0S66",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.94"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "kkcDxmDe6F9fwhoJ",
|
||||
"filament_id": "OF5F0S66",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.035"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "QRl3zpmacQ8D8aNX",
|
||||
"filament_id": "OFCp3Bgo",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"14"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "qF5SGZKoINokZfx2",
|
||||
"filament_id": "OFFwJWea",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.5"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
]
|
||||
}
|
||||
+51
@@ -0,0 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "6aUrszW2Dj8CNYIp",
|
||||
"filament_id": "OFFwJWea",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
]
|
||||
}
|
||||
+51
@@ -0,0 +1,51 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "f8K19ebfxiXji84y",
|
||||
"filament_id": "OFFwJWea",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"7.2"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.025"
|
||||
]
|
||||
}
|
||||
+273
@@ -0,0 +1,273 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "NTs7c6NqAudTl9wk",
|
||||
"filament_id": "OF7c9fln",
|
||||
"instantiation": "true",
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.96"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"dont_slow_down_outer_wall": [
|
||||
"1"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_cooling_layer_time_BRASS": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed_BRASS": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"60"
|
||||
],
|
||||
"fan_min_speed_BRASS": [
|
||||
"70"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_BRASS": [
|
||||
"205"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_layer_time_BRASS": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
+255
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "oSWtTJpng3ERixPJ",
|
||||
"filament_id": "OFMsDGbs",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"bed_type": [
|
||||
"High Temp Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.23"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"0"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"1"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "gaQ37xRo6J467j1y",
|
||||
"instantiation": "true",
|
||||
"printer_technology": "FFF",
|
||||
"printer_settings_id": "Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"printer_model": "Anycubic Kobra 3 V2",
|
||||
"printer_variant": "0.2",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"default_print_profile": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"default_filament_profile": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
|
||||
],
|
||||
"disable_m73": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"thumbnails": [
|
||||
"230x110"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails_internal": [
|
||||
"512x512/PNG/top"
|
||||
],
|
||||
"thumbnails_internal_switch": "1",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [],
|
||||
"bed_mesh_max": "0,0",
|
||||
"bed_mesh_min": "0,0",
|
||||
"bed_mesh_probe_distance": "0,0",
|
||||
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "0",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "0",
|
||||
"extruder_clearance_height_to_lid": "250",
|
||||
"extruder_clearance_height_to_rod": "20",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"FF4D4F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
|
||||
"machine_load_filament_time": "42",
|
||||
"machine_max_acceleration_e": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"15",
|
||||
"10",
|
||||
"26"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.14"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_height": "4",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "107",
|
||||
"parking_pos_retraction": "0",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printer_flush_multiplier": "1",
|
||||
"printer_notes": "",
|
||||
"printer_structure": "i3",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.3"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"258"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_on_top_layer": [
|
||||
"1"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "1",
|
||||
"template_custom_gcode": "",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -0,0 +1,251 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "l49qdfdrHYEO04bV",
|
||||
"instantiation": "true",
|
||||
"printer_technology": "FFF",
|
||||
"printer_settings_id": "Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"printer_model": "Anycubic Kobra 3 V2",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"default_filament_profile": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"disable_m73": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"thumbnails": "230x110/PNG",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails_internal": "512x512/PNG/top",
|
||||
"thumbnails_internal_switch": "1",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [],
|
||||
"bed_mesh_max": "0,0",
|
||||
"bed_mesh_min": "0,0",
|
||||
"bed_mesh_probe_distance": "0,0",
|
||||
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"deretraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "0",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "0",
|
||||
"extruder_clearance_height_to_lid": "250",
|
||||
"extruder_clearance_height_to_rod": "20",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"FF4D4F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
|
||||
"machine_load_filament_time": "42",
|
||||
"machine_max_acceleration_e": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"15",
|
||||
"10",
|
||||
"26"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_height": "4",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "107",
|
||||
"parking_pos_retraction": "0",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printer_flush_multiplier": "1",
|
||||
"printer_notes": "",
|
||||
"printer_structure": "i3",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_on_top_layer": [
|
||||
"1"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "0",
|
||||
"support_chamber_temp_control": "0",
|
||||
"support_multi_bed_types": "1",
|
||||
"template_custom_gcode": "",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Slope Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -0,0 +1,251 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "hQQgQT5HeCVGpBAL",
|
||||
"instantiation": "true",
|
||||
"printer_technology": "FFF",
|
||||
"printer_settings_id": "Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"printer_model": "Anycubic Kobra 3 V2",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"default_filament_profile": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"disable_m73": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"thumbnails": "230x110/PNG",
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails_internal": "512x512/PNG/top",
|
||||
"thumbnails_internal_switch": "1",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [],
|
||||
"bed_mesh_max": "0,0",
|
||||
"bed_mesh_min": "0,0",
|
||||
"bed_mesh_probe_distance": "0,0",
|
||||
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "0",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "0",
|
||||
"extruder_clearance_height_to_lid": "250",
|
||||
"extruder_clearance_height_to_rod": "20",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"FF4D4F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
|
||||
"machine_load_filament_time": "42",
|
||||
"machine_max_acceleration_e": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"15",
|
||||
"10",
|
||||
"26"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.42"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_height": "4",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "107",
|
||||
"parking_pos_retraction": "0",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printer_flush_multiplier": "1",
|
||||
"printer_notes": "",
|
||||
"printer_structure": "i3",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"259"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_on_top_layer": [
|
||||
"1"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "1",
|
||||
"template_custom_gcode": "",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -0,0 +1,255 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "LBhbohm7o4jW6OYw",
|
||||
"instantiation": "true",
|
||||
"printer_technology": "FFF",
|
||||
"printer_settings_id": "Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"printer_model": "Anycubic Kobra 3 V2",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"default_filament_profile": [
|
||||
"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"disable_m73": "0",
|
||||
"gcode_flavor": "klipper",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"255x0",
|
||||
"255x255",
|
||||
"0x255"
|
||||
],
|
||||
"printable_height": "260",
|
||||
"thumbnails": [
|
||||
"230x110"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"thumbnails_internal": [
|
||||
"512x512/PNG/top"
|
||||
],
|
||||
"thumbnails_internal_switch": "1",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [],
|
||||
"bed_mesh_max": "0,0",
|
||||
"bed_mesh_min": "0,0",
|
||||
"bed_mesh_probe_distance": "0,0",
|
||||
"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "0",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "0",
|
||||
"extruder_clearance_height_to_lid": "250",
|
||||
"extruder_clearance_height_to_rod": "20",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_colour": [
|
||||
"FF4D4F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
|
||||
"machine_load_filament_time": "42",
|
||||
"machine_max_acceleration_e": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"1000",
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"20",
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"600",
|
||||
"300",
|
||||
"780"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"15",
|
||||
"10",
|
||||
"26"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.56"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"nozzle_height": "4",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "107",
|
||||
"parking_pos_retraction": "0",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printer_flush_multiplier": "1",
|
||||
"printer_notes": "",
|
||||
"printer_structure": "i3",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"retract_before_wipe": [
|
||||
"0%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.3"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"259.6"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_on_top_layer": [
|
||||
"1"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "1",
|
||||
"template_custom_gcode": "",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Anycubic",
|
||||
"name": "Anycubic Kobra 3 V2",
|
||||
"model_id": "Anycubic Kobra 3 V2",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl",
|
||||
"bed_texture": "Anycubic Kobra 3 V2_buildplate_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "9yiDozcVDSxKkz4V",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.08",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "7",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "5000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "1",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "auto_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "9",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "250",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "20",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "350",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "8%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "3",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "200",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "1",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "1",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "450",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_object_xy_distance": "60%",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "15",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_shell_layers": "9",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "200",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "eSyZsnWMuOyokoLr",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
|
||||
"layer_height": "0.1",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.2 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "50%",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "10",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "0",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "100",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "10",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"inner_wall_speed": "150",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.22",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "10",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"outer_wall_speed": "80",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "150",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.22",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "7",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.22",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "120",
|
||||
"travel_acceleration": "15000",
|
||||
"travel_jerk": "12",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "4",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+58
@@ -0,0 +1,58 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "HqXRokM0mAA691LV",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.12",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_acceleration": "2000",
|
||||
"bridge_speed": "30",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "5000",
|
||||
"default_jerk": "9",
|
||||
"gap_infill_speed": "180",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_speed": "50",
|
||||
"inner_wall_acceleration": "4000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"ironing_flow": "10%",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_speed": "60",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"overhang_4_4_speed": "10",
|
||||
"prime_tower_width": "35",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"seam_slope_conditional": "1",
|
||||
"seam_slope_inner_walls": "1",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "5000",
|
||||
"sparse_infill_speed": "180",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_threshold_angle": "20",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "5000",
|
||||
"travel_jerk": "9",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "NCKx6glFcaEOhqZC",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.12",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "5",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "5000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "auto_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "9",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "350",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "20",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "300",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "130",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "1",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "430",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.12",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.42",
|
||||
"support_object_xy_distance": "60%",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "200",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+51
@@ -0,0 +1,51 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "mVDCX89vYKfBA57g",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.16",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_acceleration": "2000",
|
||||
"default_acceleration": "4000",
|
||||
"default_jerk": "9",
|
||||
"infill_anchor_max": "20",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_speed": "50",
|
||||
"inner_wall_acceleration": "4000",
|
||||
"inner_wall_jerk": "9",
|
||||
"internal_solid_infill_acceleration": "4000",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_speed": "150",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_3_4_speed": "10",
|
||||
"overhang_4_4_speed": "10",
|
||||
"prime_tower_width": "30",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"seam_slope_conditional": "1",
|
||||
"seam_slope_inner_walls": "1",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "4000",
|
||||
"sparse_infill_speed": "200",
|
||||
"support_line_width": "0.42",
|
||||
"support_threshold_angle": "25",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"travel_acceleration": "4000",
|
||||
"travel_jerk": "9",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "ut3FZjM7h3doFjRg",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.16",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "5000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "auto_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "9",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "250",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "20",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "130",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "1",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "5000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "300",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.16",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_object_xy_distance": "60%",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+57
@@ -0,0 +1,57 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "V7T6yBxuQzWucCpA",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.2",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_acceleration": "4000",
|
||||
"bridge_speed": "50",
|
||||
"brim_object_gap": "0.1",
|
||||
"brim_width": "5",
|
||||
"default_acceleration": "4000",
|
||||
"default_jerk": "9",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_speed": "50",
|
||||
"inner_wall_acceleration": "4000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_acceleration": "4000",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"ironing_flow": "10%",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_speed": "60",
|
||||
"overhang_4_4_speed": "10",
|
||||
"prime_tower_width": "30",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"seam_slope_conditional": "1",
|
||||
"seam_slope_inner_walls": "1",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"sparse_infill_acceleration": "4000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "270",
|
||||
"support_line_width": "0.42",
|
||||
"support_threshold_angle": "30",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_speed": "200",
|
||||
"travel_acceleration": "4000",
|
||||
"travel_jerk": "9",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "K5se4jnf2XHJNkEQ",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.2",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "5000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "auto_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "9",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "250",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "20",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "130",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "130",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "5000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "300",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.4",
|
||||
"support_object_xy_distance": "60%",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "30",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "0",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "130",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "cg8f6Q9o8nRePSC9",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.24",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "5000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "auto_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "9",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "200",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "120",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "5000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "200",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_object_xy_distance": "60%",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "35",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+24
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "DhqKrBJZh4W22xna",
|
||||
"instantiation": "true",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"layer_height": "0.24",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "6000",
|
||||
"default_jerk": "9",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"outer_wall_jerk": "9",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"sparse_infill_acceleration": "6000",
|
||||
"support_threshold_angle": "30",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "Qe8XQonRxfA8Jei1",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
|
||||
"layer_height": "0.28",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "2000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "auto_brim",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "10000",
|
||||
"default_jerk": "9",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "200",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "20",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "200",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "9",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "120",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "0%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "30",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "10%",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "5000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "200",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "100%",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.42",
|
||||
"support_object_xy_distance": "60%",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "180",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "13ES5eks7VTR3G2E",
|
||||
"instantiation": "true",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"print_settings_id": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"layer_height": "0.3",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.6 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "500",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "5000",
|
||||
"default_jerk": "20",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "50",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "10000",
|
||||
"inner_wall_jerk": "15",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"inner_wall_speed": "150",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "5000",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"internal_solid_infill_pattern": "monotonic",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.62",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "15",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"outer_wall_speed": "120",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "15",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "35",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "1",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "10",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "10000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "100",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.62",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.6",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "5000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.62",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "15000",
|
||||
"travel_jerk": "12",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "avPzsOBN3DnXTaol",
|
||||
"instantiation": "true",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"print_settings_id": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"layer_height": "0.32",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "120",
|
||||
"outer_wall_speed": "80",
|
||||
"overhang_2_4_speed": "40",
|
||||
"overhang_3_4_speed": "30",
|
||||
"top_solid_infill_flow_ratio": "0.95"
|
||||
}
|
||||
+24
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "7pIVSig189FDjOMY",
|
||||
"instantiation": "true",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"print_settings_id": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
|
||||
"layer_height": "0.36",
|
||||
"brim_type": "auto_brim",
|
||||
"default_acceleration": "6000",
|
||||
"default_jerk": "9",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"inner_wall_acceleration": "6000",
|
||||
"inner_wall_jerk": "9",
|
||||
"outer_wall_jerk": "9",
|
||||
"raft_first_layer_expansion": "5",
|
||||
"sparse_infill_acceleration": "6000",
|
||||
"support_threshold_angle": "30",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "9"
|
||||
}
|
||||
+289
@@ -0,0 +1,289 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "0yxg7c5tH07ZMIL4",
|
||||
"instantiation": "true",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"print_settings_id": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"layer_height": "0.4",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra 3 V2 0.8 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "5000",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "0",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "6000",
|
||||
"default_jerk": "20",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "1",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "1",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "50",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "0",
|
||||
"inner_wall_jerk": "15",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"inner_wall_speed": "150",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "10000",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.82",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"outer_wall_jerk": "15",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"outer_wall_speed": "120",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "35",
|
||||
"prime_volume": "20",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "5000",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"sparse_infill_pattern": "3dhoneycomb",
|
||||
"sparse_infill_speed": "100",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "0",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.2",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_line_width": "0.82",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"top_solid_infill_flow_ratio": "0.97",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"top_surface_speed": "150",
|
||||
"travel_acceleration": "10000",
|
||||
"travel_jerk": "12",
|
||||
"travel_speed": "350",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "1.5",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0"
|
||||
}
|
||||
+17
@@ -0,0 +1,17 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"setting_id": "2cCCPfRX7H33XrMb",
|
||||
"instantiation": "true",
|
||||
"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
|
||||
"print_settings_id": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
|
||||
"layer_height": "0.48",
|
||||
"initial_layer_print_height": "0.48",
|
||||
"inner_wall_speed": "180",
|
||||
"outer_wall_speed": "140",
|
||||
"overhang_2_4_speed": "40",
|
||||
"overhang_3_4_speed": "30",
|
||||
"top_solid_infill_flow_ratio": "0.95"
|
||||
}
|
||||
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"name": "Bambulab",
|
||||
"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
|
||||
"version": "02.01.00.28",
|
||||
"version": "02.01.00.29",
|
||||
"force_update": "0",
|
||||
"description": "BBL configurations",
|
||||
"machine_model_list": [
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 42 KiB After Width: | Height: | Size: 47 KiB |
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user