juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-08-06 01:27:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add top/bottom surface fill order control (Outward/Inward) for Concentric, Archimedean Chords and Octagram Spiral (#14179)

Browse Source 
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
This commit is contained in:
Mqrius
2026-07-14 20:34:13 +02:00
committed by GitHub
parent 50768e0716
commit c84d5c7943
15 changed files with 210 additions and 89 deletions
Download Patch File Download Diff File Expand all files Collapse all files

60
src/libslic3r/PrintConfig.cpp
View File

@@ -313,6 +313,14 @@ static t_config_enum_values s_keys_map_WallDirection{
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(WallDirection)
//Orca
static t_config_enum_values s_keys_map_SurfaceFillOrder{
{ "default", int(SurfaceFillOrder::Default) },
{ "outward", int(SurfaceFillOrder::Outward) },
{ "inward", int(SurfaceFillOrder::Inward) },
};
CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(SurfaceFillOrder)
//BBS
static t_config_enum_values s_keys_map_PrintSequence {
{ "by layer", int(PrintSequence::ByLayer) },
@@ -2322,6 +2330,40 @@ void PrintConfigDef::init_fff_params()
def->max = 100;
def->set_default_value(new ConfigOptionPercent(100));
auto def_top_fill_order = def = this->add("top_surface_fill_order", coEnum);
def->label = L("Top surface fill order");
def->category = L("Strength");
def->tooltip = L("Direction in which top surfaces are filled when using a center-based pattern "
"(Concentric, Archimedean Chords, Octagram Spiral).\n"
"Outward starts at the center of the surface, so any excess material is pushed "
"towards the edge where it is least visible. Inward starts at the edge and ends "
"with the tight curves at the center.\n"
"Default uses shortest-path ordering, which may run in either direction.");
def->enum_keys_map = &ConfigOptionEnum<SurfaceFillOrder>::get_enum_values();
def->enum_values.push_back("default");
def->enum_values.push_back("outward");
def->enum_values.push_back("inward");
def->enum_labels.push_back(L("Default"));
def->enum_labels.push_back(L("Outward"));
def->enum_labels.push_back(L("Inward"));
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SurfaceFillOrder>(SurfaceFillOrder::Default));
def = this->add("bottom_surface_fill_order", coEnum);
def->label = L("Bottom surface fill order");
def->category = L("Strength");
def->tooltip = L("Direction in which bottom surfaces are filled when using a center-based pattern "
"(Concentric, Archimedean Chords, Octagram Spiral).\n"
"Inward starts each surface with the wider outer curves, which improves first layer "
"adhesion on build plates where the tight curves at the center may not stick. "
"Outward starts at the center, pushing any excess material towards the edge.\n"
"Default uses shortest-path ordering, which may run in either direction.");
def->enum_keys_map = &ConfigOptionEnum<SurfaceFillOrder>::get_enum_values();
def->enum_values = def_top_fill_order->enum_values;
def->enum_labels = def_top_fill_order->enum_labels;
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionEnum<SurfaceFillOrder>(SurfaceFillOrder::Default));
def = this->add("internal_solid_infill_pattern", coEnum);
def->label = L("Internal solid infill pattern");
def->category = L("Strength");
@@ -4605,11 +4647,6 @@ void PrintConfigDef::init_fff_params()
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionInt(2));
// ORCA: special flag for flow rate calibration
def = this->add("calib_flowrate_topinfill_special_order", coBool);
def->mode = comDevelop;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("ironing_type", coEnum);
def->label = L("Ironing type");
def->category = L("Quality");
@@ -7198,17 +7235,6 @@ void PrintConfigDef::init_fff_params()
def->min = 0;
def->set_default_value(new ConfigOptionFloat(0.6));
def = this->add("anisotropic_surfaces", coBool);
def->label = L("Anisotropic surfaces");
def->category = L("Strength");
def->tooltip = L("Anisotropic patterns on the top and bottom surfaces.\n"
"Co-directional printing mode will be applied. For certain patterns, omni-directional filling provides color "
"dispersion when using multi-colored or silk plastics.\n"
"This option disable the gap fill.\n"
"This option can increase a printing time.");
def->mode = comExpert;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("separated_infills", coBool);
def->label = L("Separated infills");
def->category = L("Strength");
@@ -8966,6 +8992,8 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
"internal_bridge_support_thickness", "top_area_threshold", "reduce_wall_solid_infill","filament_load_time","filament_unload_time",
"smooth_coefficient", "overhang_totally_speed", "silent_mode",
"overhang_speed_classic", "filament_prime_volume",
"calib_flowrate_topinfill_special_order",
"anisotropic_surfaces", // superseded by top_surface_fill_order / bottom_surface_fill_order
};
if (ignore.find(opt_key) != ignore.end()) {