harktech: fix Creality filament profile bugs from Reddit feedback

Two data-only fixes:

#1 Strip undefined {if !multicolor_method} wrapper from filament_start_gcode on 110 K2-Plus profiles. The placeholder is a CrealityPrint-ism that survived the profile port; Orca has no such variable, so slicing failed with a hard parser error (reported on Hyper PLA by u/Gullible-Price-4257). Inner per-layer temp logic now runs unconditionally, which is the correct default.

#4 Add filament_vendor: [Creality] to 50 Creality Generic profiles missing the field. Without it the UI grouped them under Generic instead of Creality (reported by u/mharrop94).

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.2 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.6 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-ABS @Creality K2 Plus 0.8 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-Nylon @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.2 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.6 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA @Creality K2 Plus 0.8 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Carbon @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.2 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.6 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Fluo @Creality K2 Plus 0.8 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.2 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.6 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-PLA Matte @Creality K2 Plus 0.8 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.2 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.6 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-Silk @Creality K2 Plus 0.8 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-TPU @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/CR-Wood @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Creality Generic ABS @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic ABS @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic ABS @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ABS",
 	"from": "system",
 	"setting_id": "GFSA04_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic ABS.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ABS",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "GFSA04",

resources/profiles/Creality/filament/Creality Generic ASA @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",

resources/profiles/Creality/filament/Creality Generic ASA @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",

resources/profiles/Creality/filament/Creality Generic ASA @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",

resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ASA",
 	"from": "system",
 	"setting_id": "GFSA04_00",

resources/profiles/Creality/filament/Creality Generic ASA-CF @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA-CF @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic ASA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSA04_00",

resources/profiles/Creality/filament/Creality Generic ASA.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic ASA",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "GFSA04",

resources/profiles/Creality/filament/Creality Generic PA-CF @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PA-CF",
 	"from": "system",
 	"setting_id": "GFSN99_01",

resources/profiles/Creality/filament/Creality Generic PA-CF @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PA-CF",
 	"from": "system",
 	"setting_id": "GFSN99_01",

resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PA-CF",
 	"from": "system",
 	"setting_id": "GFSN99_01",

resources/profiles/Creality/filament/Creality Generic PA-CF.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PA-CF",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_pa",
 	"from": "system",
 	"setting_id": "GFSN99",

resources/profiles/Creality/filament/Creality Generic PC @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PC @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PC",
 	"from": "system",
 	"setting_id": "GFSC99_06",

resources/profiles/Creality/filament/Creality Generic PC.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PC",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_pc",
 	"from": "system",
 	"filament_id": "GFC99",

resources/profiles/Creality/filament/Creality Generic PETG @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",

resources/profiles/Creality/filament/Creality Generic PETG @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",

resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",

resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PETG",
 	"from": "system",
 	"setting_id": "GFSG99_00",

resources/profiles/Creality/filament/Creality Generic PETG-CF @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG-CF @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PETG @Hi-all",
 	"from": "system",
 	"setting_id": "GFSG99_00",

resources/profiles/Creality/filament/Creality Generic PETG.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PETG",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "GFSA04",

resources/profiles/Creality/filament/Creality Generic PLA @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",

resources/profiles/Creality/filament/Creality Generic PLA @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",

resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",

resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA",
 	"from": "system",
 	"setting_id": "GFSL99_00",

resources/profiles/Creality/filament/Creality Generic PLA High Speed @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",

resources/profiles/Creality/filament/Creality Generic PLA High Speed @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",

resources/profiles/Creality/filament/Creality Generic PLA High Speed @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @K1-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",

resources/profiles/Creality/filament/Creality Generic PLA High Speed @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA High Speed @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @K2-all",
 	"from": "system",
 	"setting_id": "GFSL95_00",

resources/profiles/Creality/filament/Creality Generic PLA Matte @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",

resources/profiles/Creality/filament/Creality Generic PLA Matte @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",

resources/profiles/Creality/filament/Creality Generic PLA Matte @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @K1-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",

resources/profiles/Creality/filament/Creality Generic PLA Matte @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Matte @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @K2-all",
 	"from": "system",
 	"setting_id": "GFSL05_00",

resources/profiles/Creality/filament/Creality Generic PLA Silk @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Ender-3V3-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA Silk @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA Silk @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @K1-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA Silk @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Silk @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @K2-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA Wood @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA Wood @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA @Hi-all",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA-CF @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA-CF",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA-CF @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA-CF",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA-CF @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic PLA-CF",
 	"from": "system",
 	"setting_id": "GFSL96_00",

resources/profiles/Creality/filament/Creality Generic PLA-CF.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA-CF",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"filament_id": "GFL98",

resources/profiles/Creality/filament/Creality Generic PLA.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic PLA",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "GFSA04",

resources/profiles/Creality/filament/Creality Generic TPU @Ender-3V3-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @Ender-3V3-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic TPU @Hi-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @Hi-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @K1-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU @K2-all",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "Creality Generic TPU",
 	"from": "system",
 	"setting_id": "GFU99_CREALITY_00",

resources/profiles/Creality/filament/Creality Generic TPU.json

@@ -1,6 +1,9 @@
 {
 	"type": "filament",
 	"name": "Creality Generic TPU",
+	"filament_vendor": [
+		"Creality"
+	],
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "GFSA04",

resources/profiles/Creality/filament/EN-PLA+ @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.2 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.6 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/ENDER FAST PLA @Creality K2 Plus 0.8 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Ender-PLA @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic ABS @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic ABS @Creality K2 Plus 0.6 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic ABS @Creality K2 Plus 0.8 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic ASA @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic ASA-CF @Creality K2 Plus 0.4 nozzle.json

@@ -67,7 +67,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic BVOH @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "1",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA-CF @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA-CF @Creality K2 Plus 0.6 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA-CF @Creality K2 Plus 0.8 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA12-CF @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA6-CF @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA6-GF @Creality K2 Plus 0.4 nozzle.json

@@ -68,7 +68,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PA612-CF @Creality K2 Plus 0.4 nozzle.json

@@ -65,7 +65,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PAHT-CF @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PAHT-CF @Creality K2 Plus 0.6 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PAHT-CF @Creality K2 Plus 0.8 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PC @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrink": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PCTG @Creality K2 Plus 0.4 nozzle.json

@@ -68,7 +68,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [

resources/profiles/Creality/filament/Generic PET @Creality K2 Plus 0.4 nozzle.json

@@ -66,7 +66,7 @@
     "filament_shrinkage_compensation_z": "100%",
     "filament_soluble": "0",
     "filament_start_gcode": [
-        ";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
+        ";filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4  < printable_height) }\nG2 Z{position[2]  + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}"
     ],
     "filament_toolchange_delay": "0",
     "filament_type": [