update locale

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-25 19:57+0800\n"
+"POT-Creation-Date: 2024-10-27 23:05+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -4310,7 +4310,7 @@ msgstr "Volym:"
 msgid "Size:"
 msgstr "Storlek:"
 
-#, boost-format
+#, c-format, boost-format
 msgid ""
 "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
 "separate the conflicted objects farther (%s <-> %s)."
@@ -6305,6 +6305,13 @@ msgstr "Reason: part \"%1%\" has self intersection."
 msgid "Reason: \"%1%\" and another part have no intersection."
 msgstr "Reason: \"%1%\" and another part have no intersection."
 
+msgid ""
+"Unable to perform boolean operation on model meshes. Only positive parts "
+"will be exported."
+msgstr ""
+"Det går inte att utföra booleska operationer på modell mesh. Endast positiva "
+"delar kommer att exporteras."
+
 msgid ""
 "Are you sure you want to store original SVGs with their local paths into the "
 "3MF file?\n"
@@ -7136,8 +7143,8 @@ msgstr ""
 msgid ""
 "Timelapse is not supported because Print sequence is set to \"By object\"."
 msgstr ""
-"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per "
-"objekt\"."
+"Timelapse stöds inte eftersom utskrifts sekvensen är inställd på \"Per objekt"
+"\"."
 
 msgid "Errors"
 msgstr "Fel"
@@ -7509,8 +7516,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
 "till ett \"Timelapse Wipe Tower\".\n"
@@ -9834,7 +9841,9 @@ msgstr ""
 msgid ""
 "Number of mm the overhang need to be for the reversal to be considered "
 "useful. Can be a % of the perimeter width.\n"
-"Value 0 enables reversal on every even layers regardless."
+"Value 0 enables reversal on every even layers regardless.\n"
+"When Detect overhang wall is not enabled, this option is ignored and "
+"reversal happens on every even layers regardless."
 msgstr ""
 
 msgid "Classic mode"
@@ -9993,9 +10002,9 @@ msgid ""
 "quality for needle and small details"
 msgstr ""
 "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
-"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
-"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
-"förbättra kylnings kvaliteten för små detaljer"
+"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
+"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
+"kylnings kvaliteten för små detaljer"
 
 msgid "Normal printing"
 msgstr "Normal utskrift"
@@ -11087,10 +11096,10 @@ msgstr "Full fläkthastighet vid lager"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 
 msgid "layer"
@@ -13073,8 +13082,8 @@ msgstr ""
 
 msgid ""
 "Enable this option for automated chamber temperature control. This option "
-"activates the emitting of an M191 command before the "
-"\"machine_start_gcode\"\n"
+"activates the emitting of an M191 command before the \"machine_start_gcode"
+"\"\n"
 " which sets the chamber temperature and waits until it is reached. In "
 "addition, it emits an M141 command at the end of the print to turn off the "
 "chamber heater, if present. \n"
@@ -14929,8 +14938,8 @@ msgstr ""
 "Vill du skriva om det?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 
@@ -16453,13 +16462,6 @@ msgstr ""
 #~ msgid "Failed to parse model informations."
 #~ msgstr "Det gick inte att analysera modellinformation"
 
-#~ msgid ""
-#~ "Unable to perform boolean operation on model meshes. Only positive parts "
-#~ "will be exported."
-#~ msgstr ""
-#~ "Det går inte att utföra booleska operationer på modell mesh. Endast "
-#~ "positiva delar kommer att exporteras."
-
 #, boost-format
 #~ msgid ""
 #~ "You have changed some settings of preset \"%1%\". \n"