update locale

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-25 19:57+0800\n"
+"POT-Creation-Date: 2024-10-27 23:05+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -4379,7 +4379,7 @@ msgstr "Volume:"
 msgid "Size:"
 msgstr "Maat:"
 
-#, boost-format
+#, c-format, boost-format
 msgid ""
 "Conflicts of gcode paths have been found at layer %d, z = %.2lf mm. Please "
 "separate the conflicted objects farther (%s <-> %s)."
@@ -6409,6 +6409,13 @@ msgstr "Reason: part \"%1%\" has self intersection."
 msgid "Reason: \"%1%\" and another part have no intersection."
 msgstr "Reason: \"%1%\" and another part have no intersection."
 
+msgid ""
+"Unable to perform boolean operation on model meshes. Only positive parts "
+"will be exported."
+msgstr ""
+"Unable to perform boolean operation on model meshes. Only positive parts "
+"will be exported."
+
 msgid ""
 "Are you sure you want to store original SVGs with their local paths into the "
 "3MF file?\n"
@@ -7668,8 +7675,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add "
-"Primitive\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add Primitive"
+"\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
 "„Timelapse Wipe Tower” toe te voegen \n"
@@ -10067,7 +10074,9 @@ msgstr ""
 msgid ""
 "Number of mm the overhang need to be for the reversal to be considered "
 "useful. Can be a % of the perimeter width.\n"
-"Value 0 enables reversal on every even layers regardless."
+"Value 0 enables reversal on every even layers regardless.\n"
+"When Detect overhang wall is not enabled, this option is ignored and "
+"reversal happens on every even layers regardless."
 msgstr ""
 
 msgid "Classic mode"
@@ -11349,10 +11358,10 @@ msgstr "Volledige snelheid op laag"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer "
-"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
-"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
-"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
+"\". \"full_fan_speed_layer\" will be ignored if lower than "
+"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
+"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 
 msgid "layer"
@@ -13395,8 +13404,8 @@ msgstr "Temperatuurregeling activeren"
 
 msgid ""
 "Enable this option for automated chamber temperature control. This option "
-"activates the emitting of an M191 command before the "
-"\"machine_start_gcode\"\n"
+"activates the emitting of an M191 command before the \"machine_start_gcode"
+"\"\n"
 " which sets the chamber temperature and waits until it is reached. In "
 "addition, it emits an M141 command at the end of the print to turn off the "
 "chamber heater, if present. \n"
@@ -13753,11 +13762,10 @@ msgid ""
 "Wipe tower is only compatible with relative mode. It is recommended on most "
 "printers. Default is checked"
 msgstr ""
-"Relatieve extrusie wordt aanbevolen bij gebruik van de optie "
-"\"label_objects\". Sommige extruders werken beter als deze optie niet is "
-"aangevinkt (absolute extrusiemodus). Wipe tower is alleen compatibel met "
-"relatieve modus. Het wordt aanbevolen op de meeste printers. Standaard is "
-"aangevinkt"
+"Relatieve extrusie wordt aanbevolen bij gebruik van de optie \"label_objects"
+"\". Sommige extruders werken beter als deze optie niet is aangevinkt "
+"(absolute extrusiemodus). Wipe tower is alleen compatibel met relatieve "
+"modus. Het wordt aanbevolen op de meeste printers. Standaard is aangevinkt"
 
 msgid ""
 "Classic wall generator produces walls with constant extrusion width and for "
@@ -15282,8 +15290,8 @@ msgstr ""
 "Wil je het herschrijven?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you "
-"selected\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you selected"
+"\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 
@@ -16913,13 +16921,6 @@ msgstr ""
 #~ msgid "Failed to parse model informations."
 #~ msgstr "Failed to parse model information"
 
-#~ msgid ""
-#~ "Unable to perform boolean operation on model meshes. Only positive parts "
-#~ "will be exported."
-#~ msgstr ""
-#~ "Unable to perform boolean operation on model meshes. Only positive parts "
-#~ "will be exported."
-
 #, boost-format
 #~ msgid ""
 #~ "You have changed some settings of preset \"%1%\". \n"