Improved FLSUN S1 and T1 configurations (#6349)

resources/profiles/FLSun.json

@@ -19,14 +19,14 @@
         {
             "name": "FLSun V400",
             "sub_path": "machine/FLSun V400.json"
-        },
-		 {
-            "name": "FLSun S1",
-            "sub_path": "machine/FLSun S1.json"
         },
         {
             "name": "FLSun T1",
             "sub_path": "machine/FLSun T1.json"
+        },
+        {
+            "name": "FLSun S1",
+            "sub_path": "machine/FLSun S1.json"
         }
     ],
     "process_list": [
@@ -45,6 +45,14 @@
         {
             "name": "0.08mm Fine @FLSun SR",
             "sub_path": "process/0.08mm Fine @FLSun SR.json"
+        },
+        {
+            "name": "0.12mm Fine @FLSun T1",
+            "sub_path": "process/0.12mm Fine @FLSun T1.json"
+        },
+        {
+            "name": "0.12mm Fine @FLSun S1",
+            "sub_path": "process/0.12mm Fine @FLSun S1.json"
         },
 		{
             "name": "0.16mm Optimal @FLSun Q5",
@@ -57,6 +65,14 @@
         {
             "name": "0.16mm Optimal @FLSun SR",
             "sub_path": "process/0.16mm Optimal @FLSun SR.json"
+        },
+        {
+            "name": "0.16mm Optimal @FLSun T1",
+            "sub_path": "process/0.16mm Optimal @FLSun T1.json"
+        },
+        {
+            "name": "0.16mm Optimal @FLSun S1",
+            "sub_path": "process/0.16mm Optimal @FLSun S1.json"
         },
 		{
             "name": "0.20mm Standard @FLSun Q5",
@@ -73,14 +89,14 @@
         {
             "name": "0.20mm Standard @FLSun V400",
             "sub_path": "process/0.20mm Standard @FLSun V400.json"
-        },
-		{
-            "name": "0.20mm Standard @FLSun S1",
-            "sub_path": "process/0.20mm Standard @FLSun S1.json"
         },
         {
             "name": "0.20mm Standard @FLSun T1",
             "sub_path": "process/0.20mm Standard @FLSun T1.json"
+        },
+        {
+            "name": "0.20mm Standard @FLSun S1",
+            "sub_path": "process/0.20mm Standard @FLSun S1.json"
         },
 		{
             "name": "0.24mm Draft @FLSun Q5",
@@ -93,6 +109,14 @@
         {
             "name": "0.24mm Draft @FLSun SR",
             "sub_path": "process/0.24mm Draft @FLSun SR.json"
+        },
+        {
+            "name": "0.24mm Draft @FLSun T1",
+            "sub_path": "process/0.24mm Draft @FLSun T1.json"
+        },
+        {
+            "name": "0.24mm Draft @FLSun S1",
+            "sub_path": "process/0.24mm Draft @FLSun S1.json"
         },
 		{
             "name": "0.30mm Extra Draft @FLSun Q5",
@@ -105,6 +129,14 @@
         {
             "name": "0.30mm Extra Draft @FLSun SR",
             "sub_path": "process/0.30mm Extra Draft @FLSun SR.json"
+        },
+        {
+            "name": "0.30mm Extra Draft @FLSun T1",
+            "sub_path": "process/0.30mm Extra Draft @FLSun T1.json"
+        },
+        {
+            "name": "0.30mm Extra Draft @FLSun S1",
+            "sub_path": "process/0.30mm Extra Draft @FLSun S1.json"
         }
     ],
     "filament_list": [
@@ -185,12 +217,60 @@
             "sub_path": "filament/FLSun Generic PA-CF.json"
         },
         {
-            "name": "FLSun Generic PLA-HS-S1",
+            "name": "FLSun T1 PLA High Speed",
-            "sub_path": "filament/FLSun Generic PLA-HS-S1.json"
+            "sub_path": "filament/FLSun T1 PLA High Speed.json"
         },
         {
-            "name": "FLSun Generic PLA-HS-T1",
+            "name": "FLSun S1 PLA High Speed",
-            "sub_path": "filament/FLSun Generic PLA-HS-T1.json"
+            "sub_path": "filament/FLSun S1 PLA High Speed.json"
+        },
+        {
+            "name": "FLSun T1 PLA Silk",
+            "sub_path": "filament/FLSun T1 PLA Silk.json"
+        },
+        {
+            "name": "FLSun S1 PLA Silk",
+            "sub_path": "filament/FLSun S1 PLA Silk.json"
+        },
+        {
+            "name": "FLSun T1 PLA Generic",
+            "sub_path": "filament/FLSun T1 PLA Generic.json"
+        },
+        {
+            "name": "FLSun S1 PLA Generic",
+            "sub_path": "filament/FLSun S1 PLA Generic.json"
+        },
+        {
+            "name": "FLSun T1 PETG",
+            "sub_path": "filament/FLSun T1 PETG.json"
+        },
+        {
+            "name": "FLSun S1 PETG",
+            "sub_path": "filament/FLSun S1 PETG.json"
+        },
+        {
+            "name": "FLSun T1 ASA",
+            "sub_path": "filament/FLSun T1 ASA.json"
+        },
+        {
+            "name": "FLSun S1 ASA",
+            "sub_path": "filament/FLSun S1 ASA.json"
+        },
+        {
+            "name": "FLSun T1 TPU",
+            "sub_path": "filament/FLSun T1 TPU.json"
+        },
+        {
+            "name": "FLSun S1 TPU",
+            "sub_path": "filament/FLSun S1 TPU.json"
+        },
+        {
+            "name": "FLSun T1 ABS",
+            "sub_path": "filament/FLSun T1 ABS.json"
+        },
+        {
+            "name": "FLSun S1 ABS",
+            "sub_path": "filament/FLSun S1 ABS.json"
         }
     ],
     "machine_list": [

resources/profiles/FLSun/filament/FLSun Generic PLA-HS-S1.json

@@ -1,24 +0,0 @@
-{
-    "type": "filament",
-    "filament_id": "GFH99",
-    "setting_id": "GFSA04",
-    "name": "FLSun Generic PLA-HS-S1",
-    "from": "system",
-    "instantiation": "true",
-    "inherits": "fdm_filament_pla",
-    "filament_flow_ratio": [
-        "1.1"
-    ],
-	 "filament_type": [
-        "PLA-HS"
-    ],
-    "filament_max_volumetric_speed": [
-        "110"
-    ],
-    "slow_down_layer_time": [
-        "1"
-    ],
-    "compatible_printers": [
-        "FLSun S1 0.4 nozzle"
-	]
-}

resources/profiles/FLSun/filament/FLSun Generic PLA-HS-T1.json

@@ -1,21 +0,0 @@
-{
-    "type": "filament",
-    "filament_id": "GFL99",
-    "setting_id": "GFSA04",
-    "name": "FLSun Generic PLA-HS-T1",
-    "from": "system",
-    "instantiation": "true",
-    "inherits": "fdm_filament_pla",
-    "filament_flow_ratio": [
-        "0.95"
-    ],
-    "filament_max_volumetric_speed": [
-        "60"
-    ],
-    "slow_down_layer_time": [
-        "100"
-    ],
-    "compatible_printers": [
-        "FLSun T1 0.4 nozzle"
-    ]
-}

resources/profiles/FLSun/filament/FLSun S1 ABS.json

@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 ABS",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic ABS",
+    "fan_max_speed": ["50"],
+    "fan_min_speed": ["10"],
+    "filament_density" : "1.05",
+    "filament_flow_ratio" : "0.95",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["0"],
+    "fan_cooling_layer_time": ["30"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["90"],
+    "hot_plate_temp_initial_layer": ["90"],
+    "nozzle_temperature": ["280"],
+    "nozzle_temperature_initial_layer": ["280"],
+    "nozzle_temperature_range_low": ["240"],
+    "nozzle_temperature_range_high": ["300"],
+    "overhang_fan_speed": ["50"],
+    "slow_down_layer_time": ["12"],
+    "slow_down_min_speed": ["30"],
+    "temperature_vitrification": ["100"],
+    "filament_max_volumetric_speed": ["20"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun S1 ASA.json

@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 ASA",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic ASA",
+    "fan_max_speed": ["50"],
+    "fan_min_speed": ["35"],
+    "filament_density" : "1.05",
+    "filament_flow_ratio" : "0.95",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["0"],
+    "fan_cooling_layer_time": ["35"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["90"],
+    "hot_plate_temp_initial_layer": ["90"],
+    "nozzle_temperature": ["280"],
+    "nozzle_temperature_initial_layer": ["280"],
+    "nozzle_temperature_range_low": ["240"],
+    "nozzle_temperature_range_high": ["300"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["2"],
+    "slow_down_min_speed": ["80"],
+    "temperature_vitrification": ["100"],
+    "filament_max_volumetric_speed": ["25"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun S1 PETG.json

@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 PETG",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PETG",
+    "fan_max_speed": ["60"],
+    "fan_min_speed": ["50"],
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["2"],
+    "hot_plate_temp": ["80"],
+    "hot_plate_temp_initial_layer": ["80"],
+    "nozzle_temperature": ["260"],
+    "nozzle_temperature_initial_layer": ["260"],
+    "nozzle_temperature_range_low": ["230"],
+    "nozzle_temperature_range_high": ["270"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["2"],
+    "slow_down_min_speed": ["30"],
+    "temperature_vitrification": ["70"],
+    "filament_max_volumetric_speed": ["15"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun S1 PLA Generic.json

@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 PLA Generic",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PLA",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "filament_density" : "1.32",
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["60"],
+    "hot_plate_temp_initial_layer": ["60"],
+    "nozzle_temperature": ["240"],
+    "nozzle_temperature_initial_layer": ["240"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_range_high": ["240"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["1"],
+    "slow_down_min_speed": ["80"],
+    "filament_max_volumetric_speed": ["60"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun S1 PLA High Speed.json

@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 PLA High Speed",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PLA",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["60"],
+    "hot_plate_temp_initial_layer": ["60"],
+    "nozzle_temperature": ["230"],
+    "nozzle_temperature_initial_layer": ["230"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_range_high": ["240"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["1"],
+    "slow_down_min_speed": ["80"],
+    "filament_max_volumetric_speed": ["110"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun S1 PLA Silk.json

@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 PLA Silk",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PLA",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "filament_density" : "1.32",
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["60"],
+    "hot_plate_temp_initial_layer": ["60"],
+    "nozzle_temperature": ["240"],
+    "nozzle_temperature_initial_layer": ["240"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_range_high": ["240"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["1"],
+    "slow_down_min_speed": ["80"],
+    "filament_max_volumetric_speed": ["25"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun S1 TPU.json

@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "GFSA04",
+    "name": "FLSun S1 TPU",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic TPU",
+    "fan_max_speed": ["100"],
+    "fan_min_speed": ["100"],
+    "filament_density" : "1.22",
+    "filament_flow_ratio" : "1",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "close_fan_the_first_x_layers": ["1"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["35"],
+    "hot_plate_temp_initial_layer": ["35"],
+    "nozzle_temperature": ["240"],
+    "nozzle_temperature_initial_layer": ["240"],
+    "nozzle_temperature_range_low": ["200"],
+    "nozzle_temperature_range_high": ["250"],
+    "overhang_fan_speed": ["100"],
+    "slow_down_layer_time": ["8"],
+    "slow_down_min_speed": ["20"],
+    "temperature_vitrification": ["30"],
+    "filament_max_volumetric_speed": ["3.5"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun S1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 ABS.json

@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 ABS",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic ABS",
+    "fan_max_speed": ["50"],
+    "fan_min_speed": ["10"],
+    "filament_density" : "1.05",
+    "filament_flow_ratio" : "0.95",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["0"],
+    "fan_cooling_layer_time": ["30"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["90"],
+    "hot_plate_temp_initial_layer": ["90"],
+    "nozzle_temperature": ["280"],
+    "nozzle_temperature_initial_layer": ["280"],
+    "nozzle_temperature_range_low": ["240"],
+    "nozzle_temperature_range_high": ["300"],
+    "overhang_fan_speed": ["50"],
+    "slow_down_layer_time": ["12"],
+    "slow_down_min_speed": ["30"],
+    "temperature_vitrification": ["100"],
+    "filament_max_volumetric_speed": ["20"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 ASA.json

@@ -0,0 +1,34 @@
+{
+    "type": "filament",
+    "filament_id": "GFB98",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 ASA",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic ASA",
+    "fan_max_speed": ["50"],
+    "fan_min_speed": ["35"],
+    "filament_density" : "1.05",
+    "filament_flow_ratio" : "0.95",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["0"],
+    "fan_cooling_layer_time": ["35"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["90"],
+    "hot_plate_temp_initial_layer": ["90"],
+    "nozzle_temperature": ["280"],
+    "nozzle_temperature_initial_layer": ["280"],
+    "nozzle_temperature_range_low": ["240"],
+    "nozzle_temperature_range_high": ["300"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["2"],
+    "slow_down_min_speed": ["80"],
+    "temperature_vitrification": ["100"],
+    "filament_max_volumetric_speed": ["25"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 PETG.json

@@ -0,0 +1,32 @@
+{
+    "type": "filament",
+    "filament_id": "GFG99",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 PETG",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PETG",
+    "fan_max_speed": ["60"],
+    "fan_min_speed": ["50"],
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["2"],
+    "hot_plate_temp": ["80"],
+    "hot_plate_temp_initial_layer": ["80"],
+    "nozzle_temperature": ["260"],
+    "nozzle_temperature_initial_layer": ["260"],
+    "nozzle_temperature_range_low": ["230"],
+    "nozzle_temperature_range_high": ["270"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["2"],
+    "slow_down_min_speed": ["30"],
+    "temperature_vitrification": ["70"],
+    "filament_max_volumetric_speed": ["15"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 PLA Generic.json

@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 PLA Generic",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PLA",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "filament_density" : "1.32",
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["60"],
+    "hot_plate_temp_initial_layer": ["60"],
+    "nozzle_temperature": ["240"],
+    "nozzle_temperature_initial_layer": ["240"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_range_high": ["240"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["1"],
+    "slow_down_min_speed": ["80"],
+    "filament_max_volumetric_speed": ["60"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 PLA High Speed.json

@@ -0,0 +1,29 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 PLA High Speed",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PLA",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["60"],
+    "hot_plate_temp_initial_layer": ["60"],
+    "nozzle_temperature": ["230"],
+    "nozzle_temperature_initial_layer": ["230"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_range_high": ["240"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["1"],
+    "slow_down_min_speed": ["80"],
+    "filament_max_volumetric_speed": ["60"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 PLA Silk.json

@@ -0,0 +1,30 @@
+{
+    "type": "filament",
+    "filament_id": "GFL99",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 PLA Silk",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic PLA",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "filament_density" : "1.32",
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["60"],
+    "hot_plate_temp_initial_layer": ["60"],
+    "nozzle_temperature": ["240"],
+    "nozzle_temperature_initial_layer": ["240"],
+    "nozzle_temperature_range_low": ["190"],
+    "nozzle_temperature_range_high": ["240"],
+    "overhang_fan_speed": ["35"],
+    "slow_down_layer_time": ["1"],
+    "slow_down_min_speed": ["80"],
+    "filament_max_volumetric_speed": ["25"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/filament/FLSun T1 TPU.json

@@ -0,0 +1,35 @@
+{
+    "type": "filament",
+    "filament_id": "GFU99",
+    "setting_id": "GFSA04",
+    "name": "FLSun T1 TPU",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "FLSun Generic TPU",
+    "fan_max_speed": ["100"],
+    "fan_min_speed": ["100"],
+    "filament_density" : "1.22",
+    "filament_flow_ratio" : "1",
+    "activate_air_filtration": ["1"],
+    "complete_print_exhaust_fan_speed": ["0"],
+    "close_fan_the_first_x_layers": ["1"],
+    "during_print_exhaust_fan_speed": ["100"],
+    "fan_cooling_layer_time": ["100"],
+    "filament_cost": ["0"],
+    "full_fan_speed_layer": ["3"],
+    "hot_plate_temp": ["35"],
+    "hot_plate_temp_initial_layer": ["35"],
+    "nozzle_temperature": ["240"],
+    "nozzle_temperature_initial_layer": ["240"],
+    "nozzle_temperature_range_low": ["200"],
+    "nozzle_temperature_range_high": ["250"],
+    "overhang_fan_speed": ["100"],
+    "slow_down_layer_time": ["8"],
+    "slow_down_min_speed": ["20"],
+    "temperature_vitrification": ["30"],
+    "filament_max_volumetric_speed": ["3.5"],
+    "dont_slow_down_outer_wall": ["1"],
+    "compatible_printers": [
+		"FLSun T1 0.4 nozzle"
+    ]
+}

resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json

@@ -6,95 +6,173 @@
     "instantiation": "true",
     "inherits": "fdm_machine_common",
     "printer_model": "FLSun S1",
-  "default_print_profile": "0.20mm PLA_HS_S1_FLSUN @FLSUN",
+    "default_print_profile": "0.20mm Standard @FLSun S1",
     "gcode_flavor": "klipper",
+    "printer_structure": "delta",
     "nozzle_diameter": [
         "0.4"
     ],
     "bed_exclude_area": [
       "0x0"
     ],
+    "thumbnails": [
+        "48x48/PNG, 300x300/PNG"
+    ],
+    "deretraction_speed": [
+        "80"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "retract_before_wipe": [
+        "30%"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retract_restart_extra": [
+        "-0.05"
+    ],
+    "retract_restart_extra_toolchange": [
+        "-0.05"
+    ],
+    "retraction_length": [
+        "1"
+    ],
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retraction_speed": [
+        "80"
+    ],
+    "machine_max_acceleration_e": [
+        "40000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "40000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "40000"
+    ],
+    "machine_max_acceleration_x": [
+        "40000"
+    ],
+    "machine_max_acceleration_y": [
+        "40000"
+    ],
+    "machine_max_acceleration_z": [
+        "40000"
+    ],
+    "machine_max_jerk_e": [
+        "100"
+    ],
+    "machine_max_jerk_x": [
+        "20000"
+    ],
+    "machine_max_jerk_y": [
+        "20000"
+    ],
+    "machine_max_jerk_z": [
+        "10000"
+    ],
+    "machine_max_speed_e": [
+        "1200"
+    ],
+    "machine_max_speed_x": [
+        "1200"
+    ],
+    "machine_max_speed_y": [
+        "1200"
+    ],
+    "machine_max_speed_z": [
+        "1200"
+    ],
     "printable_area": [
-    "159.392x13.945",
+        "159.391x13.9449",
-    "157.57x27.7838",
+        "157.569x27.7837",
-    "154.549x41.4112",
+        "154.548x41.411",
-    "150.351x54.7234",
+        "150.351x54.7232",
-    "145.01x67.6191",
+        "145.009x67.6189",
-    "138.564x80.0002",
+        "138.564x80",
-    "131.065x91.7725",
+        "131.064x91.7722",
         "122.567x102.846",
         "113.137x113.137",
         "102.846x122.567",
-    "91.7725x131.065",
+        "91.7722x131.064",
-    "80.0003x138.564",
+        "80x138.564",
-    "67.6191x145.01",
+        "67.6189x145.009",
-    "54.7234x150.351",
+        "54.7232x150.351",
-    "41.4112x154.549",
+        "41.411x154.548",
-    "27.7838x157.57",
+        "27.7837x157.569",
-    "13.945x159.392",
+        "13.9449x159.391",
-    "9.79721e-15x160",
+        "9.79717e-15x160",
-    "-13.945x159.392",
+        "-13.9449x159.391",
-    "-27.7838x157.57",
+        "-27.7837x157.569",
-    "-41.4112x154.549",
+        "-41.411x154.548",
-    "-54.7234x150.351",
+        "-54.7232x150.351",
-    "-67.6191x145.01",
+        "-67.6189x145.009",
-    "-80.0002x138.564",
+        "-80x138.564",
-    "-91.7725x131.065",
+        "-91.7722x131.064",
         "-102.846x122.567",
         "-113.137x113.137",
         "-122.567x102.846",
-    "-131.065x91.7725",
+        "-131.064x91.7722",
-    "-138.564x80.0003",
+        "-138.564x80",
-    "-145.01x67.6191",
+        "-145.009x67.6189",
-    "-150.351x54.7234",
+        "-150.351x54.7232",
-    "-154.549x41.4112",
+        "-154.548x41.411",
-    "-157.57x27.7838",
+        "-157.569x27.7837",
-    "-159.392x13.945",
+        "-159.391x13.9449",
-    "-160x1.95944e-14",
+        "-160x1.95943e-14",
-    "-159.392x-13.945",
+        "-159.391x-13.9449",
-    "-157.57x-27.7838",
+        "-157.569x-27.7837",
-    "-154.549x-41.4112",
+        "-154.548x-41.411",
-    "-150.351x-54.7234",
+        "-150.351x-54.7232",
-    "-145.01x-67.6191",
+        "-145.009x-67.6189",
-    "-138.564x-80.0003",
+        "-138.564x-80",
-    "-131.065x-91.7725",
+        "-131.064x-91.7722",
         "-122.567x-102.846",
         "-113.137x-113.137",
         "-102.846x-122.567",
-    "-91.7725x-131.065",
+        "-91.7722x-131.064",
-    "-80.0003x-138.564",
+        "-80x-138.564",
-    "-67.6191x-145.01",
+        "-67.6189x-145.009",
-    "-54.7234x-150.351",
+        "-54.7232x-150.351",
-    "-41.4112x-154.549",
+        "-41.411x-154.548",
-    "-27.7838x-157.57",
+        "-27.7837x-157.569",
-    "-13.945x-159.392",
+        "-13.9449x-159.391",
-    "-2.93916e-14x-160",
+        "-2.93915e-14x-160",
-    "13.945x-159.392",
+        "13.9449x-159.391",
-    "27.7838x-157.57",
+        "27.7837x-157.569",
-    "41.4112x-154.549",
+        "41.411x-154.548",
-    "54.7234x-150.351",
+        "54.7232x-150.351",
-    "67.6191x-145.01",
+        "67.6189x-145.009",
-    "80.0002x-138.564",
+        "80x-138.564",
-    "91.7725x-131.065",
+        "91.7722x-131.064",
         "102.846x-122.567",
         "113.137x-113.137",
         "122.567x-102.846",
-    "131.065x-91.7725",
+        "131.064x-91.7722",
-    "138.564x-80.0002",
+        "138.564x-80",
-    "145.01x-67.6191",
+        "145.009x-67.6189",
-    "150.351x-54.7234",
+        "150.351x-54.7232",
-    "154.549x-41.4112",
+        "154.548x-41.411",
-    "157.57x-27.7838",
+        "157.569x-27.7837",
-    "159.392x-13.945",
+        "159.391x-13.9449",
-    "160x-3.91888e-14"
+        "160x-3.91887e-14"
     ],
+    "support_air_filtration": "1",
     "printable_height": "430",
-  "machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 Z+0.5  F6000\nG28 \nG90 ;absolute positioning",
+    "machine_end_gcode": "M107 T0\nM104 S0\nM140 S0\nM104 S0 T1\nG92 E0\nG91\nG1 E-1 F2100\nG1 Z+0.5 F6000\nG28\nG90",
-  "machine_start_gcode": "G21\nG90\nM82\nG28 ; home all axes\nM140 S[first_layer_bed_temperature] is_AB\nM104 S[first_layer_temperature] T0\nG1 F3000 Z1\nG1 X-155 Y0 Z0.4\nM107 T0\nM109 S[first_layer_temperature] T0\nM190 S[first_layer_bed_temperature] is_AB\nG92 E0\nG3 X0 Y-155 I155 Z0.3 E30 F2000\nG92 E0\nSET_TMC_CURRENT STEPPER=extruder CURRENT=0.8",
+    "machine_start_gcode": "G90\nM82\nG28\n{if (first_layer_print_min[0] > 100 || first_layer_print_max[0] > 100 || first_layer_print_min[1] > 100 || first_layer_print_max[1] > 100 || first_layer_print_min[0] < -100 || first_layer_print_max[0] < -100 || first_layer_print_min[1] < -100 || first_layer_print_max[1] < -100)}M140 S[first_layer_bed_temperature] A1 B1{else}M140 S[first_layer_bed_temperature] A1 B0{endif}\nM104 S[first_layer_temperature] T0\nM107 T0\nM109 S[first_layer_temperature] T0\n{if (first_layer_print_min[0] > 100 || first_layer_print_max[0] > 100 || first_layer_print_min[1] > 100 || first_layer_print_max[1] > 100 || first_layer_print_min[0] < -100 || first_layer_print_max[0] < -100 || first_layer_print_min[1] < -100 || first_layer_print_max[1] < -100)}M190 S[first_layer_bed_temperature] A1 B1{else}M190 S[first_layer_bed_temperature] A1 B0{endif}\nG1 Z150 F6000\nG1 X-160 Y0 Z0.4 F4000\nG92 E0\nG3 X0 Y-160 I160 J0 Z0.3 E30 F2000\nG1 Z2 F2000\nG92 E0\nSET_TMC_CURRENT STEPPER=extruder CURRENT=0.8",
+    "change_filament_gcode": "PAUSE",
+    "machine_pause_gcode": "PAUSE",
     "layer_change_gcode": "",
-  "machine_pause_gcode": "M600",
+    "support_chamber_temp_control": "0",
     "scan_first_layer": "0",
     "nozzle_type": "hardened_steel",
+    "adaptive_bed_mesh_margin": "0",
+    "emit_machine_limits_to_gcode": "0",
     "auxiliary_fan": "0"
-}
+  }
   

resources/profiles/FLSun/machine/FLSun S1.json

@@ -5,8 +5,8 @@
     "nozzle_diameter": "0.4",
     "machine_tech": "FFF",
     "family": "FLSun",
-  "bed_model": "flsun_s1_buildplate_model.stl",
+    "bed_model": "FLSun_S1_buildplate_model.stl",
-  "bed_texture": "flsun_s1_buildplate_texture.svg",
+    "bed_texture": "FLSun_S1_buildplate_texture.png",
     "hotend_model": "",
-  "default_materials": "FLSun Generic PLA-HS-S1"
+    "default_materials": "FLSun S1 PLA High Speed;FLSun S1 PLA Silk;FLSun S1 PLA Generic;FLSun S1 PETG;FLSun S1 ASA;FLSun S1 TPU;FLSun S1 ABS"
 }

resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json

@@ -6,14 +6,87 @@
   "instantiation": "true",
   "inherits": "fdm_machine_common",
   "printer_model": "FLSun T1",
-  "default_print_profile": "0.20mm PLA_HS_T1_FLSUN @FLSUN",
+  "default_print_profile": "0.20mm Standard @FLSun T1",
   "gcode_flavor": "klipper",
+  "printer_structure": "delta",
   "nozzle_diameter": [
     "0.4"
   ],
   "bed_exclude_area": [
     "0x0"
   ],
+  "thumbnails": [
+        "48x48/PNG, 300x300/PNG"
+    ],
+  "deretraction_speed": [
+        "70"
+    ],
+  "max_layer_height": [
+        "0.3"
+    ],
+  "retract_before_wipe": [
+        "30%"
+    ],
+  "retract_length_toolchange": [
+        "1"
+    ],
+  "retract_restart_extra": [
+        "-0.05"
+    ],
+  "retract_restart_extra_toolchange": [
+        "-0.05"
+    ],
+  "retraction_length": [
+        "1"
+    ],
+  "retraction_minimum_travel": [
+        "2"
+    ],
+  "retraction_speed": [
+        "70"
+    ],
+  "machine_max_acceleration_e": [
+        "30000"
+    ],
+  "machine_max_acceleration_extruding": [
+        "30000"
+    ],
+  "machine_max_acceleration_retracting": [
+        "30000"
+    ],
+  "machine_max_acceleration_x": [
+        "30000"
+    ],
+  "machine_max_acceleration_y": [
+        "30000"
+    ],
+  "machine_max_acceleration_z": [
+        "30000"
+    ],
+  "machine_max_jerk_e": [
+        "100"
+    ],
+  "machine_max_jerk_x": [
+        "20000"
+    ],
+  "machine_max_jerk_y": [
+        "20000"
+    ],
+  "machine_max_jerk_z": [
+        "10000"
+    ],
+  "machine_max_speed_e": [
+        "1000"
+    ],
+  "machine_max_speed_x": [
+        "1000"
+    ],
+  "machine_max_speed_y": [
+        "1000"
+    ],
+  "machine_max_speed_z": [
+        "1000"
+    ],
   "printable_area": [
     "129.505x11.3302",
     "128.025x22.5743",
@@ -88,13 +161,18 @@
     "129.505x-11.3302",
     "130x-3.18408e-14"
   ],
+  "support_air_filtration": "1",
   "printable_height": "330",
-  "machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 Z+0.5  F6000\nG28 \nG90 ;absolute positioning\nTIMELAPSE_RENDER",
+  "machine_end_gcode": "M107 T0\nM104 S0\nM104 S0 T1\nM140 S0\nG92 E0\nG91\nG1 E-1 F2100\nG1 Z+0.5 F6000\nG28\nG90",
-  "machine_start_gcode": "G21\nG90\nM82\nG28 ; home all axes\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature] T0\nG1 F3000 Z1\nG1 X-125 Y0 Z0.4\nM109 S[first_layer_temperature] T0\nM190 S[first_layer_bed_temperature]\nM107 T0\nG92 E0\nG3 X0 Y-125 I125 Z0.3 E30 F2000\nG92 E0\nSET_TMC_CURRENT STEPPER=extruder CURRENT=0.8",
+  "machine_start_gcode": "G21\nG90\nM82\nG28\nM140 S[first_layer_bed_temperature]\nM104 S[first_layer_temperature] T0\nM109 S[first_layer_temperature] T0\nM190 S[first_layer_bed_temperature]\nG1 Z150 F3000\nG1 X-130 Y0 Z0.4\nM107 T0\nG92 E0\nG3 X0 Y-130 I130 J0 Z0.3 E30 F2000\nG1 Z2 F2000\nG92 E0\nSET_TMC_CURRENT STEPPER=extruder CURRENT=0.8",
+  "change_filament_gcode": "PAUSE",
+  "machine_pause_gcode": "PAUSE",
   "layer_change_gcode": "",
-  "machine_pause_gcode": "M600",
+  "support_chamber_temp_control": "0",
   "scan_first_layer": "0",
   "nozzle_type": "hardened_steel",
+  "adaptive_bed_mesh_margin": "0",
+  "emit_machine_limits_to_gcode": "0",
   "auxiliary_fan": "0"
 }
   

resources/profiles/FLSun/machine/FLSun T1.json

@@ -5,8 +5,8 @@
     "nozzle_diameter": "0.4",
     "machine_tech": "FFF",
     "family": "FLSun",
-  "bed_model": "flsun_T1_buildplate_model.stl",
+    "bed_model": "FLSun_T1_buildplate_model.stl",
-  "bed_texture": "flsun_T1_buildplate_texture.svg",
+    "bed_texture": "FLSun_T1_buildplate_texture.png",
     "hotend_model": "",
-  "default_materials": "FLSun Generic PLA-HS-T1"
+    "default_materials": "FLSun T1 PLA High Speed;FLSun T1 PLA Silk;FLSun T1 PLA Generic;FLSun T1 PETG;FLSun T1 ASA;FLSun T1 TPU;FLSun T1 ABS"
 }

resources/profiles/FLSun/process/0.12mm Fine @FLSun S1.json

@@ -0,0 +1,69 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.12mm Fine @FLSun S1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "layer_height": "0.12",
+  "bottom_shell_layers": "7",
+  "bottom_shell_thickness": "0.84",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "32000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "450",
+  "infill_jerk": "600",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "12000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "22000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "550",
+  "internal_solid_infill_acceleration": "20000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "500",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "20000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "800",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_bottom_z_distance": "0.12",
+  "support_threshold_angle": "20",
+  "support_top_z_distance": "0.12",
+  "top_shell_layers": "7",
+  "top_surface_acceleration": "12000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "top_shell_thickness": "0.84",
+  "travel_acceleration": "32000",
+  "travel_jerk": "600",
+  "travel_speed": "1200",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun S1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.12mm Fine @FLSun T1.json

@@ -0,0 +1,69 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.12mm Fine @FLSun T1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "layer_height": "0.12",
+  "bottom_shell_layers": "7",
+  "bottom_shell_thickness": "0.84",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "30000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "450",
+  "infill_jerk": "500",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "10000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "15000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "550",
+  "internal_solid_infill_acceleration": "15000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "500",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "15000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "600",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_bottom_z_distance": "0.12",
+  "support_threshold_angle": "20",
+  "support_top_z_distance": "0.12",
+  "top_shell_layers": "7",
+  "top_surface_acceleration": "10000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "top_shell_thickness": "0.84",
+  "travel_acceleration": "20000",
+  "travel_jerk": "500",
+  "travel_speed": "1000",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun T1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.16mm Optimal @FLSun S1.json

@@ -0,0 +1,69 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.16mm Optimal @FLSun S1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "layer_height": "0.16",
+  "bottom_shell_layers": "6",
+  "bottom_shell_thickness": "0.96",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "32000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "400",
+  "infill_jerk": "600",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "12000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "22000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "500",
+  "internal_solid_infill_acceleration": "20000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "500",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "20000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "800",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_bottom_z_distance": "0.16",
+  "support_threshold_angle": "25",
+  "support_top_z_distance": "0.16",
+  "top_shell_layers": "6",
+  "top_surface_acceleration": "12000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "top_shell_thickness": "0.96",
+  "travel_acceleration": "32000",
+  "travel_jerk": "600",
+  "travel_speed": "1200",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun S1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.16mm Optimal @FLSun T1.json

@@ -0,0 +1,69 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.16mm Optimal @FLSun T1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "layer_height": "0.16",
+  "bottom_shell_layers": "6",
+  "bottom_shell_thickness": "0.96",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "30000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "400",
+  "infill_jerk": "500",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "10000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "15000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "500",
+  "internal_solid_infill_acceleration": "15000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "500",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "15000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "600",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_bottom_z_distance": "0.16",
+  "support_threshold_angle": "25",
+  "support_top_z_distance": "0.16",
+  "top_shell_layers": "6",
+  "top_surface_acceleration": "10000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "top_shell_thickness": "0.96",
+  "travel_acceleration": "20000",
+  "travel_jerk": "500",
+  "travel_speed": "1000",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun T1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.20mm Standard @FLSun S1.json

@@ -1,28 +1,62 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm PLA_HS_S1_FLSUN @FLSUN",
+  "name": "0.20mm Standard @FLSun S1",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_process_common",
-  "outer_wall_speed": "400",
+  "bottom_shell_layers": "5",
-  "inner_wall_speed": "500",
+  "bottom_shell_thickness": "0.8",
-  "sparse_infill_speed": "800",
+  "bottom_surface_pattern": "monotonicline",
-  "internal_solid_infill_speed": "500",
+  "bridge_acceleration": "5000",
-  "default_acceleration": "30000",
+  "default_acceleration": "32000",
   "default_jerk": "200",
-  "gap_infill_speed": "400",
+  "elefant_foot_compensation": "0.15",
-  "initial_layer_acceleration": "5000",
+  "gap_infill_speed": "350",
-  "initial_layer_infill_speed": "80",
+  "infill_jerk": "600",
-  "initial_layer_speed": "50",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "12000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
   "inner_wall_acceleration": "22000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "500",
+  "internal_solid_infill_acceleration": "20000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "500",
+  "internal_bridge_speed": "200",
   "is_custom_defined": "0",
-  "outer_wall_acceleration": "8000",
+  "line_width": "0.42",
-  "overhang_2_4_speed": "1234",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "20000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "800",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "top_shell_layers": "5",
   "top_surface_acceleration": "12000",
-  "top_surface_speed": "400",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
   "travel_acceleration": "32000",
+  "travel_jerk": "600",
   "travel_speed": "1200",
+  "wall_generator": "classic",
+  "wall_loops": "2",
   "compatible_printers": [
     "FLSun S1 0.4 nozzle"
   ],

resources/profiles/FLSun/process/0.20mm Standard @FLSun T1.json

@@ -1,28 +1,62 @@
 {
   "type": "process",
   "setting_id": "GP004",
-  "name": "0.20mm PLA_HS_T1_FLSUN @FLSUN",
+  "name": "0.20mm Standard @FLSun T1",
   "from": "system",
   "instantiation": "true",
   "inherits": "fdm_process_common",
-  "outer_wall_speed": "120",
+  "bottom_shell_layers": "5",
-  "inner_wall_speed": "260",
+  "bottom_shell_thickness": "0.8",
-  "sparse_infill_speed": "400",
+  "bottom_surface_pattern": "monotonicline",
-  "internal_solid_infill_speed": "260",
+  "bridge_acceleration": "5000",
-  "default_acceleration": "8000",
+  "default_acceleration": "30000",
-  "default_jerk": "20",
+  "default_jerk": "200",
-  "gap_infill_speed": "250",
+  "elefant_foot_compensation": "0.15",
-  "initial_layer_acceleration": "1000",
+  "gap_infill_speed": "350",
-  "initial_layer_infill_speed": "60",
+  "infill_jerk": "500",
-  "initial_layer_speed": "30",
+  "infill_wall_overlap": "15%",
-  "inner_wall_acceleration": "8000",
+  "initial_layer_acceleration": "10000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "15000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "500",
+  "internal_solid_infill_acceleration": "15000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "500",
+  "internal_bridge_speed": "200",
   "is_custom_defined": "0",
-  "outer_wall_acceleration": "8000",
+  "line_width": "0.42",
-  "overhang_1_4_speed": "80",
+  "only_one_wall_top": "1",
-  "top_surface_acceleration": "12000",
+  "outer_wall_acceleration": "10000",
-  "top_surface_speed": "300",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "15000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "600",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "top_shell_layers": "5",
+  "top_surface_acceleration": "10000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
   "travel_acceleration": "20000",
-  "travel_speed": "800",
+  "travel_jerk": "500",
+  "travel_speed": "1000",
+  "wall_generator": "classic",
+  "wall_loops": "2",
   "compatible_printers": [
     "FLSun T1 0.4 nozzle"
   ],

resources/profiles/FLSun/process/0.24mm Draft @FLSun S1.json

@@ -0,0 +1,65 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.24mm Draft @FLSun S1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "bottom_shell_layers": "5",
+  "bottom_shell_thickness": "0.8",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "32000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "330",
+  "infill_jerk": "600",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "12000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "22000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "450",
+  "internal_solid_infill_acceleration": "20000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "450",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "20000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "750",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_threshold_angle": "35",
+  "top_shell_layers": "5",
+  "top_surface_acceleration": "12000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "travel_acceleration": "32000",
+  "travel_jerk": "600",
+  "travel_speed": "1200",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun S1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.24mm Draft @FLSun T1.json

@@ -0,0 +1,65 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.24mm Draft @FLSun T1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "bottom_shell_layers": "5",
+  "bottom_shell_thickness": "0.8",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "30000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "330",
+  "infill_jerk": "500",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "10000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "15000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "450",
+  "internal_solid_infill_acceleration": "15000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "450",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "15000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "550",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_threshold_angle": "35",
+  "top_shell_layers": "5",
+  "top_surface_acceleration": "10000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "travel_acceleration": "20000",
+  "travel_jerk": "500",
+  "travel_speed": "1000",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun T1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun S1.json

@@ -0,0 +1,67 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.30mm Extra Draft @FLSun S1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "layer_height": "0.3",
+  "bottom_shell_layers": "4",
+  "bottom_shell_thickness": "1.2",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "32000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "300",
+  "infill_jerk": "600",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "12000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "22000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "450",
+  "internal_solid_infill_acceleration": "20000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "450",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "20000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "650",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_threshold_angle": "40",
+  "top_shell_layers": "4",
+  "top_shell_thickness": "1.2",
+  "top_surface_acceleration": "12000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "travel_acceleration": "32000",
+  "travel_jerk": "600",
+  "travel_speed": "1200",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun S1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}

resources/profiles/FLSun/process/0.30mm Extra Draft @FLSun T1.json

@@ -0,0 +1,67 @@
+{
+  "type": "process",
+  "setting_id": "GP004",
+  "name": "0.30mm Extra Draft @FLSun T1",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_process_common",
+  "layer_height": "0.3",
+  "bottom_shell_layers": "4",
+  "bottom_shell_thickness": "1.2",
+  "bottom_surface_pattern": "monotonicline",
+  "bridge_acceleration": "5000",
+  "default_acceleration": "30000",
+  "default_jerk": "200",
+  "elefant_foot_compensation": "0.15",
+  "gap_infill_speed": "300",
+  "infill_jerk": "500",
+  "infill_wall_overlap": "15%",
+  "initial_layer_acceleration": "10000",
+  "initial_layer_infill_speed": "105",
+  "initial_layer_jerk": "20",
+  "initial_layer_speed": "80",
+  "initial_layer_travel_speed": "400",
+  "inner_wall_acceleration": "15000",
+  "inner_wall_jerk": "150",
+  "inner_wall_speed": "450",
+  "internal_solid_infill_acceleration": "15000",
+  "internal_solid_infill_line_width": "0.42",
+  "internal_solid_infill_speed": "450",
+  "internal_bridge_speed": "200",
+  "is_custom_defined": "0",
+  "line_width": "0.42",
+  "only_one_wall_top": "1",
+  "outer_wall_acceleration": "10000",
+  "outer_wall_jerk": "20",
+  "outer_wall_line_width": "0.42",
+  "outer_wall_speed": "400",
+  "overhang_1_4_speed": "200",
+  "overhang_2_4_speed": "150",
+  "overhang_3_4_speed": "100",
+  "overhang_4_4_speed": "50",
+  "skirt_speed": "80",
+  "sparse_infill_acceleration": "15000",
+  "sparse_infill_density": "10%",
+  "sparse_infill_pattern": "gyroid",
+  "sparse_infill_speed": "500",
+  "support_interface_speed": "100",
+  "support_line_width": "0.42",
+  "support_speed": "350",
+  "support_type": "tree(auto)",
+  "support_threshold_angle": "40",
+  "top_shell_layers": "4",
+  "top_shell_thickness": "1.2",
+  "top_surface_acceleration": "10000",
+  "top_surface_jerk": "20",
+  "top_surface_line_width": "0.40",
+  "top_surface_speed": "250",
+  "travel_acceleration": "20000",
+  "travel_jerk": "500",
+  "travel_speed": "1000",
+  "wall_generator": "classic",
+  "wall_loops": "2",
+  "compatible_printers": [
+    "FLSun T1 0.4 nozzle"
+  ],
+	"exclude_object": "1"
+}