ENH: translate tree organic and so on

Change-Id: I07beafffefc2ca24aa861892b6ca0d8cd5d3ae0e
2026-05-19 19:33:47 +00:00 · 2023-10-24 17:48:04 +08:00
parent d7a4623380
commit bc0470647d
29 changed files with 388 additions and 226 deletions
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -355,7 +355,7 @@ msgstr ""
 msgid "Lower part"
 msgstr ""

-msgid "Keep"
+msgid "Keep orientation"
 msgstr ""

 msgid "Place on cut"
@@ -2423,14 +2423,6 @@ msgid ""
 "No  - Give up using spiral mode this time"
 msgstr ""

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5418,6 +5410,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr ""

@@ -5628,6 +5625,9 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -5656,8 +5656,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""

 msgid "Line width"
@@ -10222,6 +10222,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -10368,6 +10373,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

--- a/bbl/i18n/cs/BambuStudio_cs.po
+++ b/bbl/i18n/cs/BambuStudio_cs.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: 2023-10-18 10:45+0800\n"
 "Last-Translator: René Mošner <renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -358,8 +358,8 @@ msgstr "Horní část"
 msgid "Lower part"
 msgstr "Spodní část"

-msgid "Keep"
-msgstr "Ponechat"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Umístit řezem na podložku"
@@ -2594,14 +2594,6 @@ msgstr ""
 "Ano - Změňte tato nastavení a povolte režim spirála/váza automaticky\n"
 "Ne - zrušit povolení spirálového režimu"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5730,6 +5722,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Chyby"

@@ -5969,6 +5966,9 @@ msgstr ""
 "Pro hladký časosběr je vyžadována čistící věž. Na model bez hlavní věže. "
 "Chcete aktivovat čistící věž?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6011,8 +6011,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Při nahrávání časosběru bez nástrojové hlavy se doporučuje přidat  "
 "\"Timelapse Wipe Tower\" \n"
@@ -11132,6 +11132,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11278,6 +11283,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11397,8 +11405,8 @@ msgid ""
 msgstr ""
 "Plochou na podložku\n"
 "Věděli jste, že můžete rychle nastavit orientaci modelu tak, aby jedna z "
-"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na podložku"
-"\" nebo stiskněte klávesu <b>F</b>."
+"jeho stěn spočívala na tiskovém podloží? Vyberte funkci \"Plochou na "
+"podložku\" nebo stiskněte klávesu <b>F</b>."

 #: resources/data/hints.ini: [hint:Object List]
 msgid ""
@@ -11609,6 +11617,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Ponechat"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "Language: de\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -351,8 +351,8 @@ msgstr "Oberer Teil"
 msgid "Lower part"
 msgstr "Unterer Teil"

-msgid "Keep"
-msgstr "Beibehalten"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Auf den Schnitt legen"
@@ -2638,14 +2638,6 @@ msgstr ""
 "Ja - Diese Einstellungen ändern und den Spiralmodus automatisch aktivieren\n"
 "Nein - Spiralmodus nicht aktivieren"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5806,6 +5798,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Fehler"

@@ -6060,6 +6057,9 @@ msgstr ""
 "Reinigungsturm kann es zu Fehlern am Modell kommen. Möchten Sie den "
 "Reinigungsturm aktivieren?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6104,13 +6104,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Wenn Sie einen Zeitraffer ohne Werkzeugkopf aufnehmen, wird empfohlen, einen "
 "\"Timelapse Wischturm\" hinzuzufügen, indem Sie mit der rechten Maustaste "
-"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"->"
-"\"Timelapse Wischturm\" wählen."
+"auf die leere Position der Bauplatte klicken und \"Primitiv hinzufügen\"-"
+">\"Timelapse Wischturm\" wählen."

 msgid "Line width"
 msgstr "Breite der Linie"
@@ -11230,6 +11230,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11376,6 +11381,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11711,6 +11719,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Beibehalten"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Strg + Umschalt + Eingabe"

--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "Language: en\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -349,8 +349,8 @@ msgstr "Upper part"
 msgid "Lower part"
 msgstr "Lower part"

-msgid "Keep"
-msgstr "Keep"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Place on cut"
@@ -2570,14 +2570,6 @@ msgstr ""
 "Yes - Change these settings and enable spiral/vase mode automatically\n"
 "No  - Cancel enabling spiral mode"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5683,6 +5675,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Errors"

@@ -5922,6 +5919,9 @@ msgstr ""
 "A prime tower is required for smooth timelapse mode. There may be flaws on "
 "the model without prime tower. Do you want to enable the prime tower?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -5963,13 +5963,13 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."

 msgid "Line width"
 msgstr "Line width"
@@ -10980,6 +10980,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11126,6 +11131,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11455,6 +11463,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Keep"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -354,8 +354,8 @@ msgstr "Upper part"
 msgid "Lower part"
 msgstr "Lower part"

-msgid "Keep"
-msgstr "Keep"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Place on cut"
@@ -2615,14 +2615,6 @@ msgstr ""
 "Sí - Cambiar estos ajustes y activar el modo espiral automáticamente\n"
 "No - Dejar de usar el modo espiral esta vez"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5768,6 +5760,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Errores"

@@ -6012,6 +6009,9 @@ msgstr ""
 "Se requiere una torre de purga para el modo timeplase suave. Sin ella puede "
 "haber fallos en el modelo. ¿Quieres activarla?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6055,8 +6055,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Al grabar timelapse sin el cabezal de la herramienta, se recomienda añadir "
 "una «Torre de purga para el timelapse» \n"
@@ -11162,6 +11162,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11308,6 +11313,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11638,6 +11646,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Keep"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -354,8 +354,8 @@ msgstr "Partie supérieure"
 msgid "Lower part"
 msgstr "Partie inférieure"

-msgid "Keep"
-msgstr "Garder"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Placer sur la coupe"
@@ -2621,14 +2621,6 @@ msgstr ""
 "vase\n"
 "Non - Annuler l'activation du mode spirale"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5791,6 +5783,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Erreurs"

@@ -6049,6 +6046,9 @@ msgstr ""
 "avoir des défauts sur le modèle sans tour de nettoyage. Voulez-vous activer "
 "la désactiver?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6092,8 +6092,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour de nettoyage timelapse\".\n"
@@ -6224,9 +6224,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
-"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
-"imprimé sur le plateau froid."
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
+"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
+"être imprimé sur le plateau froid."

 msgid "Engineering Plate"
 msgstr "Plaque Engineering"
@@ -7386,8 +7386,8 @@ msgstr ""

 msgid "The prime tower is not supported in \"By object\" print."
 msgstr ""
-"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par objet"
-"\"."
+"La tour de nettoyage n'est pas prise en charge dans l'impression \"Par "
+"objet\"."

 msgid ""
 "The prime tower is not supported when adaptive layer height is on. It "
@@ -8044,8 +8044,8 @@ msgid ""
 "thickness (top+bottom solid layers)"
 msgstr ""
 "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-"garantir l'épaisseur verticale de la coque (couches solides supérieure"
-"+inférieure)."
+"garantir l'épaisseur verticale de la coque (couches solides "
+"supérieure+inférieure)."

 msgid "Internal bridge support thickness"
 msgstr "Épaisseur du support interne du pont"
@@ -11239,6 +11239,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11385,6 +11390,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11723,6 +11731,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Garder"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Maj + Entrée"

--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -352,8 +352,8 @@ msgstr "Upper part"
 msgid "Lower part"
 msgstr "Lower part"

-msgid "Keep"
-msgstr "Keep"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Place on cut"
@@ -2603,14 +2603,6 @@ msgstr ""
 "spirál mód használatát\n"
 "Nem - Ne használja a spirál módot ez alkalommal"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5733,6 +5725,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Hibák"

@@ -5975,6 +5972,9 @@ msgstr ""
 "A sima timelapse miatt szükség van a törlőtoronyra. Nélküle előfordulhatnak "
 "hibák a nyomtatott tárgyon. Engedélyezed a törlőtornyot?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6017,8 +6017,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Ha a nyomtatófej nélküli timelapse engedélyezve van, javasoljuk, hogy "
 "helyezz el a tálcán egy „Timelapse törlőtornyot“. Ehhez kattints jobb "
@@ -11095,6 +11095,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11241,6 +11246,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11571,6 +11579,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Keep"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "Language: it\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -350,8 +350,8 @@ msgstr "Parte superiore"
 msgid "Lower part"
 msgstr "Parte inferiore"

-msgid "Keep"
-msgstr "Mantieni"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Posiziona sul taglio"
@@ -2617,14 +2617,6 @@ msgstr ""
 "Si - Modifica queste impostazioni ed abilita la modalità spirale/vaso\n"
 "No - Annulla l'attivazione della modalità a spirale"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5754,6 +5746,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Errori"

@@ -6001,6 +5998,9 @@ msgstr ""
 "esserci dei difetti sul modello senza Prime Tower. Vuoi abilitare la Prime "
 "Tower?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6043,8 +6043,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 "aggiungere un \"Timelapse Torre di pulizia\"\n"
@@ -6999,8 +6999,8 @@ msgid ""
 msgstr ""
 "È stato rilevato un aggiornamento importante che deve essere eseguito prima "
 "che la stampa possa continuare. Si desidera aggiornare ora? È possibile "
-"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna firmware"
-"\"."
+"effettuare l'aggiornamento anche in un secondo momento da \"Aggiorna "
+"firmware\"."

 msgid ""
 "The firmware version is abnormal. Repairing and updating are required before "
@@ -11165,6 +11165,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11311,6 +11316,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11642,6 +11650,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Mantieni"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Invio"

@@ -13024,8 +13035,8 @@ msgstr ""
 #~ "Quando si registra un timelapse senza testa di satmpa, si consiglia di "
 #~ "aggiungere un \"Timelapse Torre di pulizia\"\n"
 #~ "facendo clic con il pulsante destro del mouse sulla posizione vuota del "
-#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di pulizia"
-#~ "\"».\n"
+#~ "piatto e scegli \"Aggiungi primitiva\" ->\"Timelapse Torre di "
+#~ "pulizia\"».\n"

 #~ msgid ""
 #~ "When sparse infill density is low, the internal solid infill or internal "
--- a/bbl/i18n/ja/BambuStudio_ja.po
+++ b/bbl/i18n/ja/BambuStudio_ja.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "Language: ja\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -348,8 +348,8 @@ msgstr "Upper part"
 msgid "Lower part"
 msgstr "Lower part"

-msgid "Keep"
-msgstr "Keep"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Place on cut"
@@ -2509,14 +2509,6 @@ msgstr ""
 "はい - 変更して、スパイラルモードを有効にします\n"
 "いいえ - 変更せず、スパイラルモードを有効しません"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5576,6 +5568,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "エラー"

@@ -5814,6 +5811,9 @@ msgstr ""
 "スムーズタイムラプスビデオを作成するにはプライムタワーが必要です。プライムタ"
 "ワーを有効にしますか？"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -5851,8 +5851,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "ヘッド無しのタイムラプスビデオを録画する時に、「タイムラプスプライムタワー」"
 "を追加してください。プレートで右クリックして、「プリミティブを追加」→「タイム"
@@ -10688,6 +10688,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -10834,6 +10839,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11135,6 +11143,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Keep"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/ko/BambuStudio_ko.po
+++ b/bbl/i18n/ko/BambuStudio_ko.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -352,8 +352,8 @@ msgstr "상단 부분"
 msgid "Lower part"
 msgstr "하단 부분"

-msgid "Keep"
-msgstr "유지"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "절단면에 놓기"
@@ -2543,14 +2543,6 @@ msgstr ""
 "예 - 이 설정을 변경하고 나선형/꽃병 모드를 자동으로 활성화\n"
 "아니요 - 나선형 모드 활성화 취소"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5640,6 +5632,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "오류"

@@ -5871,6 +5868,9 @@ msgstr ""
 "smooth 타임랩스 모드를 위해서는 프라임 타워가 필요합니다. 프라임 타워가 없는 "
 "모델에는 결함이 있을 수 있습니다. 프라임 타워를 활성화하시겠습니까?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -5910,8 +5910,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "툴헤드 없이 타임랩스를 녹화할 때는 “타임랩스 와이프 타워”를 추가하는 것이 좋"
 "습니다. \n"
@@ -10825,6 +10825,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -10971,6 +10976,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11297,6 +11305,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "유지"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -350,8 +350,8 @@ msgstr "Upper part"
 msgid "Lower part"
 msgstr "Lower part"

-msgid "Keep"
-msgstr "Keep"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Place on cut"
@@ -2617,14 +2617,6 @@ msgstr ""
 "Ja - Pas de instellingen aan en zet de vaas modus automatisch aan\n"
 "Nee - Pas de vaas modus deze keer niet toe"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5778,6 +5770,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Fouten"

@@ -6024,6 +6021,9 @@ msgstr ""
 "gebreken ontstaan aan het model zonder prime-toren. Wilt u de prime-toren "
 "inschakelen?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6066,8 +6066,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Bij het opnemen van timelapse zonder toolhead is het aan te raden om een "
 "„Timelapse Wipe Tower” toe te voegen \n"
@@ -11186,6 +11186,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11332,6 +11337,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11662,6 +11670,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Keep"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/ru/BambuStudio_ru.po
+++ b/bbl/i18n/ru/BambuStudio_ru.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: 2023-08-11 09:11+0800\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -15,8 +15,8 @@ msgstr ""
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && n"
-"%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
+"Plural-Forms: nplurals=3; plural=(n%10==1 && n%100!=11 ? 0 : n%10>=2 && "
+"n%10<=4 && (n%100<12 || n%100>14) ? 1 : 2);\n"
 "X-Generator: Poedit 3.3.1\n"

 msgid "Supports Painting"
@@ -359,8 +359,8 @@ msgstr "Верхняя часть"
 msgid "Lower part"
 msgstr "Нижняя часть"

-msgid "Keep"
-msgstr "Держать"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Поместить на срез"
@@ -2601,14 +2601,6 @@ msgstr ""
 "Да – изменить эти настройки и автоматически включить режим спирали\n"
 "Нет — на этот раз отказаться от использования режима спирали"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5741,6 +5733,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Ошибки"

@@ -5964,6 +5961,9 @@ msgstr ""
 "Для плавного таймлапса требуется Prime Tower. Могут быть недостатки в модели "
 "без главной башни. Вы хотите включить главную башню?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6007,8 +6007,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записи таймлапса без инструментальной головки рекомендуется добавить "
 "\"Timelapse Wipe Tower\"\n"
@@ -11051,6 +11051,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11197,6 +11202,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11518,6 +11526,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Держать"
+
 #, c-format, boost-format
 #~ msgid ""
 #~ "Klipper's max_accel_to_decel will be adjusted to this % of acceleration"
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -350,8 +350,8 @@ msgstr "Övre del"
 msgid "Lower part"
 msgstr "Nedre del"

-msgid "Keep"
-msgstr "Behåll"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Placera på snitt"
@@ -2587,14 +2587,6 @@ msgstr ""
 "JA -Ändra dessa inställningar och möjliggör Spiral läge automatiskt\n"
 "NEJ  -Avbryt Spiral läge denna gång"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5703,6 +5695,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Fel"

@@ -5945,6 +5942,9 @@ msgstr ""
 "Prime tower krävs för Smooth timelapse-läge. Det kan bli fel på modellen "
 "utan prime tower. Vill du aktivera prime tower?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -5987,8 +5987,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "När du spelar in timelapse utan verktygshuvud rekommenderas att du lägger "
 "till ett \"Timelapse Wipe Tower\".\n"
@@ -7749,9 +7749,9 @@ msgid ""
 "quality for needle and small details"
 msgstr ""
 "Aktivera detta val för att sänka utskifts hastigheten för att göra den sista "
-"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets tröskel"
-"\", detta så att lager kan kylas under en längre tid. Detta kan förbättra "
-"kylnings kvaliteten för små detaljer"
+"lager tiden inte kortare än lager tidströskeln \"Max fläkthastighets "
+"tröskel\", detta så att lager kan kylas under en längre tid. Detta kan "
+"förbättra kylnings kvaliteten för små detaljer"

 msgid "Normal printing"
 msgstr "Normal utskrift"
@@ -11004,6 +11004,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11150,6 +11155,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11479,6 +11487,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Behåll"
+
 #~ msgid "Ctrl + Shift + Enter"
 #~ msgstr "Ctrl + Shift + Enter"

--- a/bbl/i18n/uk/BambuStudio_uk.po
+++ b/bbl/i18n/uk/BambuStudio_uk.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: BambuLab Україна\n"
@@ -352,8 +352,8 @@ msgstr "Верхня частина"
 msgid "Lower part"
 msgstr "Нижня частина"

-msgid "Keep"
-msgstr "Тримати"
+msgid "Keep orientation"
+msgstr ""

 msgid "Place on cut"
 msgstr "Помістити на зріз"
@@ -2609,14 +2609,6 @@ msgstr ""
 "Так – змінити ці налаштування та автоматично включити режим спіралі\n"
 "Ні - цього разу відмовитися від використання режиму спіралі"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr ""
-
-msgid "Still print by object?"
-msgstr ""
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -5758,6 +5750,11 @@ msgid ""
 "timelapse videos."
 msgstr ""

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr ""
+
 msgid "Errors"
 msgstr "Помилки"

@@ -6003,6 +6000,9 @@ msgstr ""
 "Для плавного таймлапсу потрібно Prime Tower. Можуть бути недоліки в "
 "моделіБез головної вежі. Ви хочете включити головну вежу?"

+msgid "Still print by object?"
+msgstr ""
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -6045,8 +6045,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "При записі таймлапсу без інструментальної головки рекомендується додати "
 "“Timelapse Wipe Tower” \n"
@@ -11222,6 +11222,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr ""

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr ""
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr ""

@@ -11368,6 +11373,9 @@ msgid ""
 "exported as a zip."
 msgstr ""

+msgid "Please select at least one printer or filament."
+msgstr ""
+
 msgid "Please select a type you want to export"
 msgstr ""

@@ -11701,6 +11709,9 @@ msgid ""
 "temperature. More info about this in the Wiki."
 msgstr ""

+#~ msgid "Keep"
+#~ msgstr "Тримати"
+
 #~ msgid "\\u2103"
 #~ msgstr "\\u2103"

--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2023-10-23 10:18+0800\n"
+"POT-Creation-Date: 2023-10-24 17:43+0800\n"
 "PO-Revision-Date: 2023-07-07 09:45+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
@@ -355,8 +355,8 @@ msgstr "上半部分"
 msgid "Lower part"
 msgstr "下半部分"

-msgid "Keep"
-msgstr "保持"
+msgid "Keep orientation"
+msgstr "保持方向"

 msgid "Place on cut"
 msgstr "切割面放置到热床"
@@ -911,7 +911,7 @@ msgid "Disc"
 msgstr "小圆片"

 msgid "Torus"
-msgstr ""
+msgstr "圆环"

 msgid "Bambu Cube"
 msgstr "Bambu方块"
@@ -2491,14 +2491,6 @@ msgstr ""
 "是 - 自动调整这些设置并开启旋转模式\n"
 "否 - 暂不使用旋转模式"

-msgid ""
-"When print by object, machines with I3 structure will not generate timelapse "
-"videos."
-msgstr "当按对象打印时，具有I3结构的机器将不会生成延时视频。"
-
-msgid "Still print by object?"
-msgstr "仍然按对象打印吗？"
-
 msgid ""
 "Prime tower does not work when Adaptive Layer Height or Independent Support "
 "Layer Height is on.\n"
@@ -4155,7 +4147,7 @@ msgstr "您最多能选择16张图片"
 msgid ""
 "At least one successful print record of this print profile is required \n"
 "to give a positive rating(4 or 5stars)."
-msgstr ""
+msgstr "至少需要一个成功的打印记录，才能给出积极的评价（4星或5星）。"

 msgid "Status"
 msgstr "设备状态"
@@ -5562,6 +5554,11 @@ msgid ""
 "timelapse videos."
 msgstr "启用螺旋花瓶模式时，具有I3结构的机器将不会生成延时视频。"

+msgid ""
+"When print by object, machines with I3 structure will not generate timelapse "
+"videos."
+msgstr "当按对象打印时，具有I3结构的机器将不会生成延时视频。"
+
 msgid "Errors"
 msgstr "错误"

@@ -5788,6 +5785,9 @@ msgid ""
 msgstr ""
 "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您想打开擦料塔吗？"

+msgid "Still print by object?"
+msgstr "仍然按对象打印吗？"
+
 msgid ""
 "We have added an experimental style \"Tree Slim\" that features smaller "
 "support volume but weaker strength.\n"
@@ -5825,8 +5825,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "在录制无工具头延时摄影视频时，建议添加“延时摄影擦料塔”\n"
 "右键单击打印板的空白位置，选择“添加标准模型”->“延时摄影擦料塔”。"
@@ -6052,7 +6052,7 @@ msgid "Layer change G-code"
 msgstr "换层G-code"

 msgid "Time lapse G-code"
-msgstr ""
+msgstr "延时摄影G-code"

 msgid "Change filament G-code"
 msgstr "耗材丝更换G-code"
@@ -6101,7 +6101,7 @@ msgstr "被其他预设继承的预设不能被删除"

 msgid "The following presets inherits this preset."
 msgid_plural "The following preset inherits this preset."
-msgstr[0] ""
+msgstr[0] "以下预置继承了该预置。"

 #. TRN  Remove/Delete
 #, boost-format
@@ -9034,7 +9034,7 @@ msgid "Tree Hybrid"
 msgstr "混合树"

 msgid "Tree Organic"
-msgstr ""
+msgstr "有机树"

 msgid "Independent support layer height"
 msgstr "支撑独立层高"
@@ -9658,7 +9658,7 @@ msgid "Support: detect overhangs"
 msgstr "支撑：正在检测悬空面"

 msgid "Support: precalculate avoidance"
-msgstr ""
+msgstr "支持：预计算避让区域"

 msgid "Support: generate contact points"
 msgstr "支撑：正在生成接触点"
@@ -10404,10 +10404,10 @@ msgid "Intersection"
 msgstr "交集"

 msgid "Source Volume"
-msgstr ""
+msgstr "源体积"

 msgid "Tool Volume"
-msgstr ""
+msgstr "工具体积"

 msgid "selected"
 msgstr "已选中"
@@ -10655,6 +10655,11 @@ msgid ""
 "choose the vendor and model of the printer"
 msgstr "您尚未选择要基于哪个打印机预设来创建。请先选择打印机的供应商和型号。"

+msgid ""
+"You have entered an illegal input in the printable area section on the first "
+"page. Please check before creating it."
+msgstr "您在第一页的可打印区域部分输入了非法输入。请检查后再创建。"
+
 msgid "The custom printer or model is not inputed, place input."
 msgstr "自定义打印机或型号未输入，请输入。"

@@ -10818,6 +10823,9 @@ msgstr ""
 "只显示带有更改的工艺预设的打印机名称，您选择的每个打印机名称中的所有用户工艺"
 "预设都将导出为一个ZIP文件。"

+msgid "Please select at least one printer or filament."
+msgstr "请至少选择一种打印机或耗材丝。"
+
 msgid "Please select a type you want to export"
 msgstr "请选择一个你想导出的类型"

@@ -11130,6 +11138,9 @@ msgstr ""
 "在较高腔温下打印低温耗材，打开机箱门可以减少挤出机/热端堵塞的概率。有关此的更"
 "多信息，请参阅Wiki。"

+#~ msgid "Keep"
+#~ msgstr "保持"
+
 #~ msgid "Order of inner wall/outer wall/infil"
 #~ msgstr "内墙/外墙/填充的顺序"

@@ -15447,8 +15458,8 @@ msgstr ""
 #~ msgstr "正在准备设置页"

 #~ msgid ""
-#~ "You have the following presets with saved options for \"Print Host upload"
-#~ "\""
+#~ "You have the following presets with saved options for \"Print Host "
+#~ "upload\""
 #~ msgstr "您的以下预设中包含未保存的选项“打印主机上传”"

 #~ msgid ""