update locale and Simplified/Tranditional Chinese translation

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -10678,6 +10678,16 @@ msgid ""
 "The prime tower requires that support has the same layer height with object."
 msgstr ""
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -14877,7 +14887,16 @@ msgstr ""
 msgid "Base pattern"
 msgstr ""
 
-msgid "Line pattern of support."
+msgid ""
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
 msgstr ""
 
 msgid "Rectilinear grid"

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-03-15 10:55+0100\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11461,6 +11461,16 @@ msgstr ""
 "La Torre de Purga requereix que el suport tingui la mateixa alçada de capa "
 "amb objecte."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16842,8 +16852,17 @@ msgstr "Velocitat de la interfície de suport"
 msgid "Base pattern"
 msgstr "Patró de la base"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Patró lineal del suport"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Quadrícula rectilínia"
@@ -21576,6 +21595,9 @@ msgstr ""
 "augmentar adequadament la temperatura del llit pot reduir la probabilitat de "
 "deformació?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Patró lineal del suport"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2026-02-11 20:30+0100\n"
 "Last-Translator: Jakub Hencl <jakub.hencl@seznam.cz> René Mošner "
 "<Renemosner@seznam.cz>\n"
@@ -12096,6 +12096,16 @@ msgstr ""
 "objekt.Čistící věž vyžaduje, aby podpěry měly stejnou výšku vrstvy jako "
 "objekt."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -17881,8 +17891,17 @@ msgstr "Rychlost pro kontaktní vrstvy podpěr"
 msgid "Base pattern"
 msgstr "Základní vzor"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Čárový vzor podpěry"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Přímočará mřížka"
@@ -22947,6 +22966,9 @@ msgstr ""
 "může zvýšení teploty vyhřívané podložky snížit pravděpodobnost vzniku "
 "deformace?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Čárový vzor podpěry"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -12043,6 +12043,16 @@ msgstr ""
 "Der Reinigungsturm erfordert, dass die Stützstrukturen die gleiche "
 "Schichthöhe wie das Objekt haben."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -17666,8 +17676,17 @@ msgstr "Geschwindigkeit der Stützstruktur-Schnittstellen."
 msgid "Base pattern"
 msgstr "Basismuster"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Linienmuster der Stützstrukturen"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Rechtwinkliges Gitter"
@@ -22635,6 +22654,9 @@ msgstr ""
 "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die "
 "Wahrscheinlichkeit von Verwerfungen verringert werden kann?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Linienmuster der Stützstrukturen"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-05-18 09:32-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: \n"
@@ -10844,6 +10844,16 @@ msgid ""
 msgstr ""
 "A prime tower requires that support has the same layer height as the object."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -15230,8 +15240,17 @@ msgstr "This is the speed for support interfaces."
 msgid "Base pattern"
 msgstr ""
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "This is the line pattern for support."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr ""
@@ -19339,6 +19358,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "This is the line pattern for support."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Ian A. Bassi <>\n"
 "Language-Team: \n"
@@ -11997,6 +11997,16 @@ msgstr ""
 "La torre de purga requiere que el soporte tenga la misma altura de capa que "
 "el objeto."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -17607,8 +17617,17 @@ msgstr "Velocidad de la interfaz de soporte"
 msgid "Base pattern"
 msgstr "Patrón de base"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Patrón de líneas de soportes"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Cuadrícula Rectilínea"
@@ -22589,6 +22608,9 @@ msgstr ""
 "aumentar adecuadamente la temperatura de la cama térmica puede reducir la "
 "probabilidad de deformaciones?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Patrón de líneas de soportes"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -11545,6 +11545,16 @@ msgstr ""
 "La tour d’amorçage nécessite que le support ait la même hauteur de couche "
 "avec l'objet."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16993,8 +17003,17 @@ msgstr "Vitesse pour l'interface des supports"
 msgid "Base pattern"
 msgstr "Motif de base"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Motif de ligne de support"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Grille rectiligne"
@@ -21785,6 +21804,9 @@ msgstr ""
 "déformer, tels que l’ABS, une augmentation appropriée de la température du "
 "plateau chauffant peut réduire la probabilité de déformation?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Motif de ligne de support"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -11107,6 +11107,16 @@ msgstr ""
 "The prime tower requires that support has the same layer height as the "
 "object."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -15613,8 +15623,17 @@ msgstr "Támasz érintkező felületek sebessége"
 msgid "Base pattern"
 msgstr "Alap mintázata"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "A támasz mintázata."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Vonalrács"
@@ -19869,6 +19888,9 @@ msgstr ""
 "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a "
 "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "A támasz mintázata."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11501,6 +11501,16 @@ msgstr ""
 "La torre di spurgo richiede che i supporti abbiano gli strati della stessa "
 "altezza dell'oggetto."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16940,8 +16950,17 @@ msgstr "Velocità per le interfacce di supporto."
 msgid "Base pattern"
 msgstr "Motivo base"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Motivo delle linee utilizzate nei supporti."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Griglia rettilinea"
@@ -21701,6 +21720,9 @@ msgstr ""
 "aumentare in modo appropriato la temperatura del piano riscaldato può "
 "ridurre la probabilità di deformazione?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Motivo delle linee utilizzate nei supporti."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -10917,6 +10917,16 @@ msgstr ""
 "プライムタワーを使用するには、オブジェクトとサポートが同じ積層ピッチを使う必"
 "要があります"
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -15324,8 +15334,17 @@ msgstr "サポート接触面の造形速度です。"
 msgid "Base pattern"
 msgstr "基本パターン"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "サポートのサターンです。"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "直線グリッド"
@@ -19473,6 +19492,9 @@ msgstr ""
 "ABSのような反りやすい素材を印刷する場合、ヒートベッドの温度を適切に上げること"
 "で、反りが発生する確率を下げることができることをご存知ですか？"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "サポートのサターンです。"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-06-02 17:12+0900\n"
 "Last-Translator: crwusiz <crwusiz@gmail.com>\n"
 "Language-Team: \n"
@@ -11183,6 +11183,16 @@ msgid ""
 "The prime tower requires that support has the same layer height with object."
 msgstr "프라임 타워는 서포트가 객체와 동일한 레이어 높이를 갖도록 요구합니다."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16218,8 +16228,17 @@ msgstr "서포트 접점 속도"
 msgid "Base pattern"
 msgstr "기본 패턴"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "서포트 기본 패턴"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "직선 격자"
@@ -20728,6 +20747,9 @@ msgstr ""
 "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 "
 "높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "서포트 기본 패턴"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/lt/OrcaSlicer_lt.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-10-25 23:01+0300\n"
 "Last-Translator: Gintaras Kučinskas <sharanchius@gmail.com>\n"
 "Language-Team: \n"
@@ -11466,6 +11466,16 @@ msgstr ""
 "Pagrindinis bokštas reikalauja, kad atramos ir objekto sluoksnio aukštis "
 "būtų toks pat."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16867,8 +16877,17 @@ msgstr "Atramų sąsajų greitis."
 msgid "Base pattern"
 msgstr "Pagrindinis raštas"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Linijinis atramų raštas."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Tiesus tinklelis"
@@ -21609,6 +21628,9 @@ msgstr ""
 "pavyzdžiui, ABS, tinkamai padidinus kaitinimo pagrindo temperatūrą galima "
 "sumažinti deformavimosi tikimybę."
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Linijinis atramų raštas."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -11241,6 +11241,16 @@ msgid ""
 msgstr ""
 "Een prime toren vereist dat support dezelfde laaghoogte heeft als het object."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -15797,8 +15807,17 @@ msgstr "Dit is de snelheid voor het printen van de support interfaces."
 msgid "Base pattern"
 msgstr "Basis patroon"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Dit is het lijnpatroon voor support."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Rechtlijnig raster"
@@ -20158,6 +20177,9 @@ msgstr ""
 "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het "
 "warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Dit is het lijnpatroon voor support."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.3.0-rc\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <<tlumaczeniebs@gmail.com>>\n"
 "Language-Team: \n"
@@ -11414,6 +11414,16 @@ msgstr ""
 "Wieża czyszcząca wymaga, aby podpory miały tę samą wysokość warstwy co "
 "obiekt."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16767,8 +16777,17 @@ msgstr "Prędkość dla warstw łączących"
 msgid "Base pattern"
 msgstr "Wzór podstawowy"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Liniowy wzór podpór"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Siatka prostoliniowa"
@@ -21452,6 +21471,9 @@ msgstr ""
 "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może "
 "zmniejszyć prawdopodobieństwo odkształceń?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Liniowy wzór podpór"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2026-02-21 18:15-0300\n"
 "Last-Translator: Alexandre Folle de Menezes\n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -11886,6 +11886,16 @@ msgstr ""
 "A torre de preparo requer que o suporte tenha a mesma altura de camada do "
 "objeto."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -17406,8 +17416,17 @@ msgstr "Velocidade da interface de suporte."
 msgid "Base pattern"
 msgstr "Padrão da base"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Padrão de linha de suporte."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Grade reticulada"
@@ -22286,6 +22305,9 @@ msgstr ""
 "aumentar adequadamente a temperatura da mesa aquecida pode reduzir a "
 "probabilidade de empenamento?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Padrão de linha de suporte."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/ru/OrcaSlicer_ru.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer V2.3.2 beta2\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2026-02-25 13:38+0300\n"
 "Last-Translator: Felix14_v2\n"
 "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), "
@@ -11841,6 +11841,16 @@ msgstr ""
 "Для черновой башни требуется, чтобы поддержка и модель имели одинаковую "
 "высоту слоя."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -17580,8 +17590,17 @@ msgstr "Ограничение скорости при печати связую
 msgid "Base pattern"
 msgstr "Шаблон поддержки"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Шаблон печати поддержки."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Чередующийся зигзаг"
@@ -22555,6 +22574,9 @@ msgstr ""
 "ABS, повышение температуры подогреваемого стола может снизить эту "
 "вероятность?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Шаблон печати поддержки."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -11086,6 +11086,16 @@ msgid ""
 "The prime tower requires that support has the same layer height with object."
 msgstr "Ett Prime Torn kräver att  support har samma lagerhöjd som objektet."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -15521,8 +15531,17 @@ msgstr "Support gränssnittets hastighet"
 msgid "Base pattern"
 msgstr "Botten mönster"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Supportens linje mönster"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Rät linjärt nät"
@@ -19788,6 +19807,9 @@ msgstr ""
 "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten "
 "för vridning?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Supportens linje mönster"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/tr/OrcaSlicer_tr.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-09-30 09:12+0300\n"
 "Last-Translator: GlauTech\n"
 "Language-Team: \n"
@@ -11390,6 +11390,16 @@ msgstr ""
 "Prime kulesi için, destek, nesne ile aynı katman yüksekliğine sahip "
 "olmalıdır."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16760,8 +16770,17 @@ msgstr "Destek arayüzünün hızı."
 msgid "Base pattern"
 msgstr "Destek deseni"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Desteğin çizgi deseni."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Doğrusal ızgara"
@@ -21514,6 +21533,9 @@ msgstr ""
 "sıcaklığının uygun şekilde arttırılmasının bükülme olasılığını "
 "azaltabileceğini biliyor muydunuz?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Desteğin çizgi deseni."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/uk/OrcaSlicer_uk.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: orcaslicerua\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-03-07 09:30+0200\n"
 "Last-Translator: \n"
 "Language-Team: Ukrainian\n"
@@ -11428,6 +11428,16 @@ msgid ""
 msgstr ""
 "Підготовча вежа вимагає, щоб підтримка мала однакову з об'єктом висоту шару."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16746,8 +16756,17 @@ msgstr "Швидкість друку підтримки"
 msgid "Base pattern"
 msgstr "Основний шаблон"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Лінія підтримки"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Прямолінійна сітка"
@@ -21414,6 +21433,9 @@ msgstr ""
 "ABS, відповідне підвищення температури гарячого ліжка може зменшити "
 "ймовірність деформації?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Лінія підтримки"
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/vi/OrcaSlicer_vi.po

@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2025-10-02 17:43+0700\n"
 "Last-Translator: \n"
 "Language-Team: hainguyen.ts13@gmail.com\n"
@@ -11245,6 +11245,16 @@ msgid ""
 "The prime tower requires that support has the same layer height with object."
 msgstr "Prime tower yêu cầu support có cùng chiều cao lớp với đối tượng."
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr ""
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr ""
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -16481,8 +16491,17 @@ msgstr "Tốc độ của giao diện support."
 msgid "Base pattern"
 msgstr "Mẫu đế"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "Mẫu đường của support."
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
 
 msgid "Rectilinear grid"
 msgstr "Lưới thẳng"
@@ -21144,6 +21163,9 @@ msgstr ""
 "Bạn có biết rằng khi in vật liệu dễ cong vênh như ABS, tăng nhiệt độ bàn "
 "nóng một cách thích hợp có thể giảm xác suất cong vênh không?"
 
+#~ msgid "Line pattern of support."
+#~ msgstr "Mẫu đường của support."
+
 #~ msgid ""
 #~ "Failed to install the plug-in. Please check whether it is blocked or "
 #~ "deleted by anti-virus software."

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2026-02-28 00:02+0800\n"
+"POT-Creation-Date: 2026-02-28 18:25+0800\n"
 "PO-Revision-Date: 2026-02-28 00:59\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -2544,7 +2544,6 @@ msgstr "添加高度范围"
 msgid "Invalid numeric."
 msgstr "数值错误。"
 
-#, fuzzy
 msgid "One cell can only be copied to one or more cells in the same column."
 msgstr "一个单元格仅能被复制到同一列的一个或多个单元格"
 
@@ -3649,8 +3648,8 @@ msgid ""
 "restart OrcaSlicer and try again. Also check whether it is blocked or "
 "deleted by anti-virus software."
 msgstr ""
-"插件安装失败。插件文件可能正在使用中。请重新启动 OrcaSlicer 后重试。"
+"插件安装失败。插件文件可能正在使用中。请重新启动 OrcaSlicer 后重试。同时检查"
-"同时检查是否被杀毒软件阻止或删除。"
+"是否被杀毒软件阻止或删除。"
 
 msgid "Click here to see more info"
 msgstr "点击这里查看更多信息"
@@ -4258,8 +4257,8 @@ msgid ""
 "Please wait until the chamber temperature drops below %d℃. You may open the "
 "front door or enable fans to cool down."
 msgstr ""
-"腔室温度过高，可能会导致耗材丝软化。请等待箱内温度降至%d℃以下。您可以打开前门或"
+"腔室温度过高，可能会导致耗材丝软化。请等待箱内温度降至%d℃以下。您可以打开前门"
-"让风扇冷却。"
+"或让风扇冷却。"
 
 #, c-format, boost-format
 msgid ""
@@ -7384,9 +7383,8 @@ msgstr "保存项目"
 msgid "Importing Model"
 msgstr "正在导入模型"
 
-#, fuzzy
 msgid "Preparing 3MF file..."
-msgstr "正在准备3mf文件..."
+msgstr "正在准备 3MF 文件..."
 
 msgid "Download failed, unknown file format."
 msgstr "下载失败，未知文件格式。"
@@ -8625,8 +8623,8 @@ msgid ""
 "More than one filament types have been mapped to the same external spool, "
 "which may cause printing issues. The printer won't pause during printing."
 msgstr ""
-"超过一种耗材丝类型已映射到同一外部料轴，这可能会导致打印问题。打印机在打印过程"
+"超过一种耗材丝类型已映射到同一外部料轴，这可能会导致打印问题。打印机在打印过"
-"中不会暂停。"
+"程中不会暂停。"
 
 msgid ""
 "The filament type setting of external spool is different from the filament "
@@ -8638,8 +8636,8 @@ msgid ""
 "currently selected printer. It is recommended that you use the same printer "
 "type for slicing."
 msgstr ""
-"生成G-code时选择的打印机类型与当前选择的打印机不一致。建议您使用相同的打印机类"
+"生成G-code时选择的打印机类型与当前选择的打印机不一致。建议您使用相同的打印机"
-"型进行切片。"
+"类型进行切片。"
 
 msgid ""
 "There are some unknown filaments in the AMS mappings. Please check whether "
@@ -8820,7 +8818,8 @@ msgid ""
 "You have selected both external and AMS filaments for an extruder. You will "
 "need to manually switch the external filament during printing."
 msgstr ""
-"您已为挤出机选择了外部耗材丝和 AMS 耗材丝。您需要在打印过程中手动切换外部耗材丝。"
+"您已为挤出机选择了外部耗材丝和 AMS 耗材丝。您需要在打印过程中手动切换外部耗材"
+"丝。"
 
 msgid ""
 "TPU 90A/TPU 85A is too soft and does not support automatic Flow Dynamics "
@@ -10066,7 +10065,8 @@ msgid ""
 "replaced with the mapped filament types and colors. This action cannot be "
 "undone."
 msgstr ""
-"同步后，项目的耗材丝预设和颜色将替换为映射的耗材丝类型和颜色。此操作无法撤消。"
+"同步后，项目的耗材丝预设和颜色将替换为映射的耗材丝类型和颜色。此操作无法撤"
+"消。"
 
 msgid "Are you sure to synchronize the filaments?"
 msgstr "您确定要同步耗材丝吗？"
@@ -11069,6 +11069,16 @@ msgid ""
 "The prime tower requires that support has the same layer height with object."
 msgstr "擦拭塔要求支撑和对象采用同样的层高。"
 
+msgid ""
+"For Organic supports, two walls are supported only with the Hollow/Default "
+"base pattern."
+msgstr "对于有机支撑，仅在空心/默认主体图案下支持双墙。"
+
+msgid ""
+"The Lightning base pattern is not supported by this support type; "
+"Rectilinear will be used instead."
+msgstr "此支撑类型不支持闪电主体图案；将改用直线图案。"
+
 msgid ""
 "Organic support tree tip diameter must not be smaller than support material "
 "extrusion width."
@@ -11574,9 +11584,9 @@ msgid ""
 "speed threshold set above. It is also adjusted upwards up to the maximum fan "
 "speed threshold when the minimum layer time threshold is not met."
 msgstr ""
-"当打印桥接结构或悬垂墙时，如果悬垂程度超过上述“悬垂冷却阈值”所设定的值，则"
+"当打印桥接结构或悬垂墙时，如果悬垂程度超过上述“悬垂冷却阈值”所设定的值，则使"
-"使用此部件冷却风扇速度。专门针对悬垂和桥接加大冷却力度，有助于提升这些特征整"
+"用此部件冷却风扇速度。专门针对悬垂和桥接加大冷却力度，有助于提升这些特征整体"
-"体的打印质量。\n"
+"的打印质量。\n"
 "\n"
 "请注意，此风扇速度的下限受前面设置的最小风扇速度阈值限制；当打印层时间未达到"
 "最小层时间阈值时，会相应上调至最大风扇速度阈值。"
@@ -13149,8 +13159,7 @@ msgstr "接触层预挤出距离"
 msgid ""
 "Pre-extrusion distance for prime tower interface layer (where different "
 "materials meet)."
-msgstr ""
+msgstr "擦拭塔接触层（不同耗材丝相遇处）的预挤出距离。"
-"擦拭塔接触层（不同耗材丝相遇处）的预挤出距离。"
 
 msgid "Interface layer pre-extrusion length"
 msgstr "接触层预挤出长度"
@@ -13158,8 +13167,7 @@ msgstr "接触层预挤出长度"
 msgid ""
 "Pre-extrusion length for prime tower interface layer (where different "
 "materials meet)."
-msgstr ""
+msgstr "擦拭塔接触层（不同耗材丝相遇处）的预挤出长度。"
-"擦拭塔接触层（不同耗材丝相遇处）的预挤出长度。"
 
 msgid "Tower ironing area"
 msgstr "擦拭塔熨烫区域"
@@ -13167,8 +13175,7 @@ msgstr "擦拭塔熨烫区域"
 msgid ""
 "Ironing area for prime tower interface layer (where different materials "
 "meet)."
-msgstr ""
+msgstr "擦拭塔接触层（不同耗材丝相遇处）的熨烫区域。"
-"擦拭塔接触层（不同耗材丝相遇处）的熨烫区域。"
 
 msgid "mm²"
 msgstr "平方毫米"
@@ -13179,8 +13186,7 @@ msgstr "接触层冲刷长度"
 msgid ""
 "Purge length for prime tower interface layer (where different materials "
 "meet)."
-msgstr ""
+msgstr "擦拭塔接触层（不同耗材丝相遇处）的冲刷长度。"
-"擦拭塔接触层（不同耗材丝相遇处）的冲刷长度。"
 
 msgid "Interface layer print temperature"
 msgstr "接触层打印温度"
@@ -13189,7 +13195,8 @@ msgid ""
 "Print temperature for prime tower interface layer (where different materials "
 "meet). If set to -1, use max recommended nozzle temperature."
 msgstr ""
-"擦拭塔接触层（不同耗材丝相遇处）的打印温度。如果设置为 -1，则使用最大推荐喷嘴温度。"
+"擦拭塔接触层（不同耗材丝相遇处）的打印温度。如果设置为 -1，则使用最大推荐喷嘴"
+"温度。"
 
 msgid "Speed of the last cooling move"
 msgstr "最后一次冷却移动的速度"
@@ -15610,8 +15617,8 @@ msgid ""
 "value is not used when 'idle_temperature' in filament settings is set to non-"
 "zero value."
 msgstr ""
-"挤出机未启动时施加的温差。当耗材丝设置中的“idle_Temperature”设置为非零值时，不"
+"挤出机未启动时施加的温差。当耗材丝设置中的“idle_Temperature”设置为非零值时，"
-"使用该值。"
+"不使用该值。"
 
 msgid "∆℃"
 msgstr "℃"
@@ -15897,8 +15904,23 @@ msgstr "支撑面速度"
 msgid "Base pattern"
 msgstr "支撑主体图案"
 
-msgid "Line pattern of support."
+msgid ""
-msgstr "支撑走线图案"
+"Line pattern of support.\n"
+"\n"
+"The Default option for Tree supports is Hollow, which means no base pattern. "
+"For other support types, the Default option is the Rectilinear pattern.\n"
+"\n"
+"NOTE: For Organic supports, the two walls are supported only with the Hollow/"
+"Default base pattern. The Lightning base pattern is supported only by Tree "
+"Slim/Strong/Hybrid supports. For the other support types, the Rectilinear "
+"will be used instead of Lightning."
+msgstr ""
+"支撑走线图案。\n"
+"\n"
+"树状支撑的默认选项为空心，即无主体图案。其他支撑类型的默认选项为直线图案。\n"
+"\n"
+"注意：对于有机支撑，仅在空心/默认主体图案下支持双墙。闪电主体图案仅树状精简/"
+"坚固/混合支撑支持。对于其他支撑类型，将改用直线图案替代闪电图案。"
 
 msgid "Rectilinear grid"
 msgstr "直线网格"
@@ -16459,8 +16481,7 @@ msgstr "启用擦拭塔接触层功能"
 msgid ""
 "Enable optimized prime tower interface behavior when different materials "
 "meet."
-msgstr ""
+msgstr "启用优化后的擦拭塔接触层行为，用于不同耗材丝相遇时。"
-"启用优化后的擦拭塔接触层行为，用于不同耗材丝相遇时。"
 
 msgid "Cool down from interface boost during prime tower"
 msgstr "擦拭塔期间从接触层加速状态冷却"
@@ -16470,8 +16491,8 @@ msgid ""
 "print temperature at the start of the prime tower so it cools down during "
 "the tower."
 msgstr ""
-"当接触层温度提升处于活动状态时，在擦拭塔开始时将喷嘴温度恢复到打印温度，"
+"当接触层温度提升处于活动状态时，在擦拭塔开始时将喷嘴温度恢复到打印温度，以便"
-"以便在打印塔期间降温。"
+"在打印塔期间降温。"
 
 msgid "Infill gap"
 msgstr "填补空白"
@@ -20344,35 +20365,3 @@ msgid ""
 msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
-
-#~ msgid ""
-#~ "Failed to install the plug-in. Please check whether it is blocked or "
-#~ "deleted by anti-virus software."
-#~ msgstr "安装插件失败。请检查是否被杀毒软件屏蔽或删除。"
-
-#~ msgid "°C"
-#~ msgstr "℃"
-
-#~ msgid "travel"
-#~ msgstr "空驶"
-
-#~ msgid "part selection"
-#~ msgstr "零件选择"
-
-#~ msgid ""
-#~ "Maximum layer height for the combined sparse infill.\n"
-#~ "Set it to 0 or 100% to use the nozzle diameter (for maximum reduction in "
-#~ "print time) or a value of ~80% to maximize sparse infill strength.\n"
-#~ "The number of layers over which infill is combined is derived by dividing "
-#~ "this value with the layer height and rounded down to the nearest "
-#~ "decimal.\n"
-#~ "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values "
-#~ "(eg 80%). This value must not be larger than the nozzle diameter."
-#~ msgstr ""
-#~ "组合稀疏填充的最大层高。\n"
-#~ "设为 0 或 100% 以使用喷嘴直径（以最大限度减少打印时间），或设为约 80% 以尽"
-#~ "可能强化稀疏填充强度。\n"
-#~ "填充组合的层数是通过将此值除以层高，并向下取整得出的。\n"
-#~ "可以使用毫米值，例如，对于 0.4 mm 喷嘴的 80 % 对应为 0.32 mm或直接使用百分"
-#~ "比值，例如 80%\n"
-#~ "此值不可大于喷嘴直径。"