diff --git a/resources/profiles/Prusa/process/0.05mm DETAIL @CORE One 0.25.json b/resources/profiles/Prusa/process/0.05mm DETAIL @CORE One 0.25.json
index 90282356ee..5a5e94e124 100644
--- a/resources/profiles/Prusa/process/0.05mm DETAIL @CORE One 0.25.json	
+++ b/resources/profiles/Prusa/process/0.05mm DETAIL @CORE One 0.25.json	
@@ -10,5 +10,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "45",
     "initial_layer_speed": "25",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25",
+    "gap_infill_speed": "45",
+    "small_perimeter_speed": "45",
+    "outer_wall_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.07mm DETAIL @CORE One 0.25.json b/resources/profiles/Prusa/process/0.07mm DETAIL @CORE One 0.25.json
index aa1fb6b9f7..cda4e3096b 100644
--- a/resources/profiles/Prusa/process/0.07mm DETAIL @CORE One 0.25.json	
+++ b/resources/profiles/Prusa/process/0.07mm DETAIL @CORE One 0.25.json	
@@ -10,5 +10,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "45",
     "initial_layer_speed": "25",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25",
+    "gap_infill_speed": "45",
+    "small_perimeter_speed": "45",
+    "outer_wall_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.10mm FAST DETAIL @CORE One 0.4.json b/resources/profiles/Prusa/process/0.10mm FAST DETAIL @CORE One 0.4.json
index d481f3139d..b2c2ca9528 100644
--- a/resources/profiles/Prusa/process/0.10mm FAST DETAIL @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.10mm FAST DETAIL @CORE One 0.4.json	
@@ -13,5 +13,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "100",
     "initial_layer_speed": "45",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4",
+    "small_perimeter_speed": "145",
+    "inner_wall_speed": "145",
+    "outer_wall_speed": "145"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.10mm STRUCTURAL @CORE One 0.5.json b/resources/profiles/Prusa/process/0.10mm STRUCTURAL @CORE One 0.5.json
index f5f6a460b0..df335dbe67 100644
--- a/resources/profiles/Prusa/process/0.10mm STRUCTURAL @CORE One 0.5.json	
+++ b/resources/profiles/Prusa/process/0.10mm STRUCTURAL @CORE One 0.5.json	
@@ -4,9 +4,9 @@
     "inherits": "0.10mm STRUCTURAL @MK4S 0.5",
     "from": "system",
     "instantiation": "true",
-    "inner_wall_speed": "80",
-    "small_perimeter_speed": "45",
-    "outer_wall_speed": "45",
+    "inner_wall_speed": "70",
+    "small_perimeter_speed": "50",
+    "outer_wall_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.12mm SPEED @CORE One 0.25.json b/resources/profiles/Prusa/process/0.12mm SPEED @CORE One 0.25.json
index 69ef541dae..3fc92e8b42 100644
--- a/resources/profiles/Prusa/process/0.12mm SPEED @CORE One 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm SPEED @CORE One 0.25.json	
@@ -10,5 +10,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "45",
     "initial_layer_speed": "25",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25",
+    "small_perimeter_speed": "150",
+    "outer_wall_speed": "150",
+    "inner_wall_speed": "150"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.25.json b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.25.json
index a61d130cb5..ec754dc350 100644
--- a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.25.json	
+++ b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.25.json	
@@ -10,5 +10,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "45",
     "initial_layer_speed": "25",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25",
+    "gap_infill_speed": "45",
+    "small_perimeter_speed": "45",
+    "outer_wall_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.3.json b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.3.json
index 35b0d2c525..101e7f0968 100644
--- a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.3.json	
+++ b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @CORE One 0.3.json	
@@ -12,5 +12,8 @@
     "initial_layer_infill_speed": "60",
     "initial_layer_speed": "45",
     "top_surface_acceleration": "1500",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3",
+    "small_perimeter_speed": "45",
+    "inner_wall_speed": "70",
+    "outer_wall_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.25.json b/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.25.json
index 8e5f0cab2d..4600a136a8 100644
--- a/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.25.json	
@@ -10,5 +10,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "45",
     "initial_layer_speed": "25",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25",
+    "small_perimeter_speed": "150",
+    "inner_wall_speed": "150",
+    "outer_wall_speed": "150"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.4.json b/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.4.json
index 2c3b531050..e08b21a26f 100644
--- a/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm SPEED @CORE One 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.15mm SPEED @MK4S 0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -16,5 +16,6 @@
     "internal_solid_infill_acceleration": "6000",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "support_threshold_angle": "35"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @CORE One HF 0.4.json b/resources/profiles/Prusa/process/0.15mm SPEED @CORE One HF 0.4.json
index fa9fb8c30c..50ad496cd2 100644
--- a/resources/profiles/Prusa/process/0.15mm SPEED @CORE One HF 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm SPEED @CORE One HF 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.15mm SPEED @MK4S HF0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_1_4_speed": "50",
     "overhang_3_4_speed": "60%",
     "sparse_infill_speed": "300",
     "travel_speed": "350",
@@ -18,5 +18,6 @@
     "internal_solid_infill_acceleration": "6000",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "support_threshold_angle": "35"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.25.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.25.json
index 55e9dc654c..51886f189e 100644
--- a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.25.json	
+++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.25.json	
@@ -10,5 +10,8 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "45",
     "initial_layer_speed": "25",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.25",
+    "gap_infill_speed": "45",
+    "small_perimeter_speed": "45",
+    "outer_wall_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.4.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.4.json
index fd2d410e48..017b232df4 100644
--- a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.15mm STRUCTURAL @MK4S 0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "sparse_infill_speed": "120",
     "travel_speed": "350",
     "travel_acceleration": "7000",
diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.5.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.5.json
index 2cecda0dd0..765d0efa49 100644
--- a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.5.json	
+++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.15mm STRUCTURAL @MK4S 0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.6.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.6.json
index 2f58de84e9..0024001fd9 100644
--- a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @CORE One 0.6.json	
@@ -4,9 +4,9 @@
     "inherits": "0.15mm STRUCTURAL @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "inner_wall_speed": "80",
-    "overhang_2_4_speed": "30",
-    "overhang_3_4_speed": "70%",
+    "inner_wall_speed": "70",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "70%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -18,5 +18,6 @@
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.6",
     "inner_wall_acceleration": "2500",
     "outer_wall_acceleration": "1500",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "gap_infill_speed": "70"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.16mm SPEED @CORE One 0.3.json b/resources/profiles/Prusa/process/0.16mm SPEED @CORE One 0.3.json
index d0ca7859df..15096ebd6b 100644
--- a/resources/profiles/Prusa/process/0.16mm SPEED @CORE One 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm SPEED @CORE One 0.3.json	
@@ -13,5 +13,8 @@
     "initial_layer_infill_speed": "60",
     "initial_layer_speed": "45",
     "top_surface_acceleration": "1500",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3",
+    "small_perimeter_speed": "160",
+    "inner_wall_speed": "160",
+    "outer_wall_speed": "160"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.16mm STRUCTURAL @CORE One 0.3.json b/resources/profiles/Prusa/process/0.16mm STRUCTURAL @CORE One 0.3.json
index 192682e5b7..4e11371cfe 100644
--- a/resources/profiles/Prusa/process/0.16mm STRUCTURAL @CORE One 0.3.json	
+++ b/resources/profiles/Prusa/process/0.16mm STRUCTURAL @CORE One 0.3.json	
@@ -12,5 +12,8 @@
     "initial_layer_infill_speed": "60",
     "initial_layer_speed": "45",
     "top_surface_acceleration": "1500",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3",
+    "small_perimeter_speed": "50",
+    "inner_wall_speed": "70",
+    "outer_wall_speed": "50"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @CORE One 0.4.json b/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @CORE One 0.4.json
index 3fe89b38a6..7e0f0042c0 100644
--- a/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @CORE One 0.4.json	
@@ -4,12 +4,15 @@
     "inherits": "0.20mm SOLUBLE FULL @MK4S 0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*HF_NOZZLE.*/",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "100",
-    "initial_layer_speed": "45"
+    "initial_layer_speed": "45",
+    "small_perimeter_speed": "50",
+    "inner_wall_speed": "70",
+    "outer_wall_speed": "50"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @CORE One 0.4.json b/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @CORE One 0.4.json
index 49c4c28280..222663644c 100644
--- a/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @CORE One 0.4.json	
@@ -4,12 +4,15 @@
     "inherits": "0.20mm SOLUBLE INTERFACE @MK4S 0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4 and printer_notes!~/.*HF_NOZZLE.*/",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "100",
-    "initial_layer_speed": "45"
+    "initial_layer_speed": "45",
+    "small_perimeter_speed": "50",
+    "inner_wall_speed": "70",
+    "outer_wall_speed": "50"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.3.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.3.json
index df4d8e80cc..0f0cc78362 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.3.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.3.json	
@@ -13,5 +13,8 @@
     "initial_layer_infill_speed": "60",
     "initial_layer_speed": "45",
     "top_surface_acceleration": "1500",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3",
+    "small_perimeter_speed": "160",
+    "inner_wall_speed": "160",
+    "outer_wall_speed": "160"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.4.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.4.json
index 9171ec4b21..79cd06680f 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.20mm SPEED @MK4S 0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -16,5 +16,6 @@
     "internal_solid_infill_acceleration": "6000",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "support_threshold_angle": "35"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.5.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.5.json
index e7299809ea..20d64e324c 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.20mm SPEED @MK4S 0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.6.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.6.json
index 78446c1687..1bbd442a02 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One 0.6.json	
@@ -4,8 +4,8 @@
     "inherits": "0.20mm SPEED @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
-    "overhang_3_4_speed": "70%",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "70%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -17,5 +17,8 @@
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*HF_NOZZLE.*/",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "small_perimeter_speed": "130",
+    "inner_wall_speed": "130",
+    "outer_wall_speed": "130"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.4.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.4.json
index 96433e26e8..5b9b42f34c 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.4.json	
@@ -4,8 +4,8 @@
     "inherits": "0.20mm SPEED @MK4S HF0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "60%",
+    "overhang_3_4_speed": "50",
+    "overhang_4_4_speed": "70%",
     "sparse_infill_speed": "300",
     "travel_speed": "350",
     "travel_acceleration": "7000",
@@ -18,5 +18,6 @@
     "internal_solid_infill_acceleration": "6000",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "support_threshold_angle": "35"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.5.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.5.json
index 3ad26d4548..c7324713ea 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.20mm SPEED @MK4S HF0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.6.json b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.6.json
index 204f356661..8cb0eb8f1c 100644
--- a/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm SPEED @CORE One HF 0.6.json	
@@ -4,8 +4,8 @@
     "inherits": "0.20mm SPEED @MK4S HF0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
-    "overhang_3_4_speed": "70%",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "70%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.3.json
index e7dd110d1d..d9b1a2ef54 100644
--- a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.3.json	
+++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.3.json	
@@ -12,5 +12,8 @@
     "initial_layer_infill_speed": "60",
     "initial_layer_speed": "45",
     "top_surface_acceleration": "1500",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.3",
+    "small_perimeter_speed": "50",
+    "inner_wall_speed": "70",
+    "outer_wall_speed": "50"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.4.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.4.json
index 95d97fea4e..a139f2cd4f 100644
--- a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.4.json	
+++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.20mm STRUCTURAL @MK4S 0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.5.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.5.json
index c6fba65551..57c2968e0d 100644
--- a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.5.json	
+++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.20mm STRUCTURAL @MK4S 0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.6.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.6.json
index 5445f967b5..9bbd5097c8 100644
--- a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @CORE One 0.6.json	
@@ -4,7 +4,7 @@
     "inherits": "0.20mm STRUCTURAL @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "30",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.5.json b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.5.json
index bfe931bc62..cb087eb345 100644
--- a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.25mm SPEED @MK4S 0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.6.json b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.6.json
index 4cd0500e7b..621c94e9d8 100644
--- a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One 0.6.json	
@@ -4,8 +4,8 @@
     "inherits": "0.25mm SPEED @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
-    "overhang_3_4_speed": "70%",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "70%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -17,5 +17,8 @@
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.6 and printer_notes!~/.*HF_NOZZLE.*/",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "small_perimeter_speed": "75",
+    "inner_wall_speed": "95",
+    "outer_wall_speed": "75"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.4.json b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.4.json
index b0b066e261..634c502f73 100644
--- a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.4.json	
+++ b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.4.json	
@@ -4,8 +4,8 @@
     "inherits": "0.25mm SPEED @MK4S HF0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
-    "overhang_3_4_speed": "60%",
+    "overhang_3_4_speed": "50",
+    "overhang_4_4_speed": "70%",
     "sparse_infill_speed": "300",
     "travel_speed": "350",
     "travel_acceleration": "7000",
@@ -13,10 +13,11 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "100",
     "initial_layer_speed": "45",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/",
+"compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/",
     "sparse_infill_acceleration": "7000",
     "internal_solid_infill_acceleration": "6000",
     "inner_wall_acceleration": "6000",
     "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "top_surface_acceleration": "2000",
+    "support_threshold_angle": "35"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.5.json b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.5.json
index 20634c06e1..268891fb46 100644
--- a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.25mm SPEED @MK4S HF0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.6.json b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.6.json
index 493f82b29b..bb26e69f5d 100644
--- a/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm SPEED @CORE One HF 0.6.json	
@@ -4,8 +4,8 @@
     "inherits": "0.25mm SPEED @MK4S HF0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
-    "overhang_3_4_speed": "70%",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "70%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.5.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.5.json
index a89610e3ee..c4d22efeb2 100644
--- a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.5.json	
+++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.25mm STRUCTURAL @MK4S 0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.6.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.6.json
index 5418273bb2..96a614266d 100644
--- a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One 0.6.json	
@@ -4,7 +4,7 @@
     "inherits": "0.25mm STRUCTURAL @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "30",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One HF 0.4.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One HF 0.4.json
index 6392a2c0f7..978f3f94d0 100644
--- a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One HF 0.4.json	
+++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @CORE One HF 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.25mm STRUCTURAL @MK4S HF0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.28mm DRAFT @CORE One HF 0.4.json b/resources/profiles/Prusa/process/0.28mm DRAFT @CORE One HF 0.4.json
index a1f896b3c0..e493e19467 100644
--- a/resources/profiles/Prusa/process/0.28mm DRAFT @CORE One HF 0.4.json	
+++ b/resources/profiles/Prusa/process/0.28mm DRAFT @CORE One HF 0.4.json	
@@ -4,7 +4,7 @@
     "inherits": "0.28mm DRAFT @MK4S HF0.4",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "support_threshold_angle": "35",
     "outer_wall_acceleration": "3000",
     "inner_wall_acceleration": "6000",
diff --git a/resources/profiles/Prusa/process/0.30mm DETAIL @CORE One 0.8.json b/resources/profiles/Prusa/process/0.30mm DETAIL @CORE One 0.8.json
index 0ecac72e60..db88957c69 100644
--- a/resources/profiles/Prusa/process/0.30mm DETAIL @CORE One 0.8.json	
+++ b/resources/profiles/Prusa/process/0.30mm DETAIL @CORE One 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.30mm DETAIL @MK4S 0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "35",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "35",
+    "top_surface_acceleration": "2000",
     "inner_wall_acceleration": "2500",
     "internal_solid_infill_acceleration": "5000",
     "sparse_infill_acceleration": "7000",
@@ -15,5 +15,6 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "55",
     "initial_layer_speed": "45",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*HF_NOZZLE.*/"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*HF_NOZZLE.*/",
+    "gap_infill_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.30mm SPEED @CORE One HF 0.8.json b/resources/profiles/Prusa/process/0.30mm SPEED @CORE One HF 0.8.json
index 8477a7c0f9..d4be25be9a 100644
--- a/resources/profiles/Prusa/process/0.30mm SPEED @CORE One HF 0.8.json	
+++ b/resources/profiles/Prusa/process/0.30mm SPEED @CORE One HF 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.30mm SPEED @MK4S HF0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "45",
+    "top_surface_acceleration": "2000",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.30mm STRUCTURAL @CORE One HF 0.8.json b/resources/profiles/Prusa/process/0.30mm STRUCTURAL @CORE One HF 0.8.json
index d8cb0916af..7426aa3a21 100644
--- a/resources/profiles/Prusa/process/0.30mm STRUCTURAL @CORE One HF 0.8.json	
+++ b/resources/profiles/Prusa/process/0.30mm STRUCTURAL @CORE One HF 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.30mm STRUCTURAL @MK4S HF0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "40",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "40",
+    "top_surface_acceleration": "2000",
     "support_speed": "100",
     "support_interface_speed": "55%",
     "travel_speed": "350",
@@ -18,6 +18,5 @@
     "sparse_infill_acceleration": "6000",
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*HF_NOZZLE.*/",
     "inner_wall_acceleration": "2500",
-    "outer_wall_acceleration": "1500",
-    "top_surface_acceleration": "2000"
+    "outer_wall_acceleration": "1500"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.32mm SPEED @CORE One 0.6.json b/resources/profiles/Prusa/process/0.32mm SPEED @CORE One 0.6.json
index 549b62c466..8b4b7511b1 100644
--- a/resources/profiles/Prusa/process/0.32mm SPEED @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm SPEED @CORE One 0.6.json	
@@ -4,8 +4,8 @@
     "inherits": "0.32mm SPEED @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
-    "overhang_3_4_speed": "70%",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "70%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.5.json b/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.5.json
index 1471abb700..55594a5dd2 100644
--- a/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.5.json	
+++ b/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.32mm SPEED @MK4S HF0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "50",
     "support_interface_speed": "50%",
     "travel_speed": "350",
     "travel_acceleration": "7000",
diff --git a/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.6.json b/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.6.json
index e9bde33023..533da07e95 100644
--- a/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm SPEED @CORE One HF 0.6.json	
@@ -4,9 +4,9 @@
     "inherits": "0.32mm SPEED @MK4S HF0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "35",
-    "overhang_3_4_speed": "70%",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "35",
+    "overhang_4_4_speed": "70%",
+    "top_surface_acceleration": "2000",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -17,6 +17,5 @@
     "sparse_infill_acceleration": "7000",
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*HF_NOZZLE.*/",
     "inner_wall_acceleration": "6000",
-    "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "outer_wall_acceleration": "3000"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One 0.6.json b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One 0.6.json
index e52aa90a5f..a652b7097c 100644
--- a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One 0.6.json	
@@ -4,7 +4,7 @@
     "inherits": "0.32mm STRUCTURAL @MK4S 0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "30",
+    "overhang_3_4_speed": "30",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.5.json b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.5.json
index a1f851d518..7fb4500b02 100644
--- a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.5.json	
+++ b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.5.json	
@@ -4,7 +4,7 @@
     "inherits": "0.32mm STRUCTURAL @MK4S HF0.5",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
+    "overhang_3_4_speed": "45",
     "support_speed": "120",
     "support_interface_speed": "50%",
     "travel_speed": "350",
diff --git a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.6.json b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.6.json
index 2a3f2ce950..887768ee8e 100644
--- a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.6.json	
+++ b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @CORE One HF 0.6.json	
@@ -4,7 +4,7 @@
     "inherits": "0.32mm STRUCTURAL @MK4S HF0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "35",
+    "overhang_3_4_speed": "35",
     "support_speed": "110",
     "support_interface_speed": "50%",
     "travel_speed": "350",
diff --git a/resources/profiles/Prusa/process/0.40mm QUALITY @CORE One 0.8.json b/resources/profiles/Prusa/process/0.40mm QUALITY @CORE One 0.8.json
index 4567cd1dd7..a92c5eb3dd 100644
--- a/resources/profiles/Prusa/process/0.40mm QUALITY @CORE One 0.8.json	
+++ b/resources/profiles/Prusa/process/0.40mm QUALITY @CORE One 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.40mm QUALITY @MK4S 0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "35",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "35",
+    "top_surface_acceleration": "2000",
     "inner_wall_acceleration": "2500",
     "internal_solid_infill_acceleration": "5000",
     "sparse_infill_acceleration": "7000",
diff --git a/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.6.json b/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.6.json
index e0b870c9ad..bb913bcabd 100644
--- a/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.6.json	
+++ b/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.6.json	
@@ -4,9 +4,9 @@
     "inherits": "0.40mm SPEED @MK4S HF0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "35",
-    "overhang_3_4_speed": "70%",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "35",
+    "overhang_4_4_speed": "70%",
+    "top_surface_acceleration": "2000",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -17,6 +17,5 @@
     "sparse_infill_acceleration": "7000",
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*HF_NOZZLE.*/",
     "inner_wall_acceleration": "6000",
-    "outer_wall_acceleration": "3000",
-    "top_surface_acceleration": "2000"
+    "outer_wall_acceleration": "3000"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.8.json b/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.8.json
index 142556619a..7e6f2c156c 100644
--- a/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.8.json	
+++ b/resources/profiles/Prusa/process/0.40mm SPEED @CORE One HF 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.40mm SPEED @MK4S HF0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "45",
+    "top_surface_acceleration": "2000",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -14,5 +14,7 @@
     "initial_layer_speed": "45",
     "internal_solid_infill_acceleration": "5000",
     "sparse_infill_acceleration": "7000",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*HF_NOZZLE.*/"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*HF_NOZZLE.*/",
+    "small_perimeter_speed": "85",
+    "outer_wall_speed": "85"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.6.json b/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.6.json
index adfba858f2..fe8697d887 100644
--- a/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.6.json	
+++ b/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.6.json	
@@ -4,7 +4,7 @@
     "inherits": "0.40mm STRUCTURAL @MK4S HF0.6",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "35",
+    "overhang_3_4_speed": "35",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
diff --git a/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.8.json b/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.8.json
index e651c26ce3..6fbe39f6ba 100644
--- a/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.8.json	
+++ b/resources/profiles/Prusa/process/0.40mm STRUCTURAL @CORE One HF 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.40mm STRUCTURAL @MK4S HF0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "40",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "40",
+    "top_surface_acceleration": "2000",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",
@@ -16,6 +16,5 @@
     "sparse_infill_acceleration": "6000",
     "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*HF_NOZZLE.*/",
     "inner_wall_acceleration": "2500",
-    "outer_wall_acceleration": "1500",
-    "top_surface_acceleration": "2000"
+    "outer_wall_acceleration": "1500"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.55mm DRAFT @CORE One 0.8.json b/resources/profiles/Prusa/process/0.55mm DRAFT @CORE One 0.8.json
index 6037cbdbda..5d350f3738 100644
--- a/resources/profiles/Prusa/process/0.55mm DRAFT @CORE One 0.8.json	
+++ b/resources/profiles/Prusa/process/0.55mm DRAFT @CORE One 0.8.json	
@@ -4,7 +4,7 @@
     "inherits": "0.55mm DRAFT @MK4S 0.8",
     "from": "system",
     "instantiation": "true",
-    "top_surface_speed": "2000",
+    "top_surface_acceleration": "2000",
     "inner_wall_acceleration": "2500",
     "internal_solid_infill_acceleration": "5000",
     "sparse_infill_acceleration": "7000",
@@ -14,5 +14,6 @@
     "support_interface_top_layers": "3",
     "initial_layer_infill_speed": "55",
     "initial_layer_speed": "45",
-    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*HF_NOZZLE.*/"
+    "compatible_printers_condition": "printer_notes=~/.*PRINTER_MODEL_COREONE.*/ and nozzle_diameter[0]==0.8 and printer_notes!~/.*HF_NOZZLE.*/",
+    "inner_wall_speed": "45"
 }
\ No newline at end of file
diff --git a/resources/profiles/Prusa/process/0.55mm SPEED @CORE One HF 0.8.json b/resources/profiles/Prusa/process/0.55mm SPEED @CORE One HF 0.8.json
index 11b159f114..f9270671a2 100644
--- a/resources/profiles/Prusa/process/0.55mm SPEED @CORE One HF 0.8.json	
+++ b/resources/profiles/Prusa/process/0.55mm SPEED @CORE One HF 0.8.json	
@@ -4,8 +4,8 @@
     "inherits": "0.55mm SPEED @MK4S HF0.8",
     "from": "system",
     "instantiation": "true",
-    "overhang_2_4_speed": "45",
-    "top_surface_speed": "2000",
+    "overhang_3_4_speed": "45",
+    "top_surface_acceleration": "2000",
     "travel_speed": "350",
     "travel_acceleration": "7000",
     "default_acceleration": "3000",