diff --git a/resources/profiles/M3D.json b/resources/profiles/M3D.json
index 17d760face..a4231e878e 100644
--- a/resources/profiles/M3D.json
+++ b/resources/profiles/M3D.json
@@ -1,12 +1,16 @@
 {
 	"name": "M3D",
-	"version": "02.04.00.03",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Configuration for M3D printers",
 	"machine_model_list": [
 		{
-			"name": "M3D Enabler D8500 MM Model",
-			"sub_path": "machine/M3D Enabler D8500 MM Model.json"
+			"name": "M3D Enabler D7500",
+			"sub_path": "machine/M3D Enabler D7500.json"
+		},
+		{
+			"name": "M3D Enabler D8500",
+			"sub_path": "machine/M3D Enabler D8500.json"
 		}
 	],
 	"machine_list": [
@@ -15,8 +19,12 @@
 			"sub_path": "machine/fdm_machine_common.json"
 		},
 		{
-			"name": "M3D Enabler D8500 MM",
-			"sub_path": "machine/M3D Enabler D8500 MM.json"
+			"name": "M3D Enabler D7500 0.4 nozzle",
+			"sub_path": "machine/M3D Enabler D7500 0.4 nozzle.json"
+		},
+		{
+			"name": "M3D Enabler D8500 0.4 nozzle",
+			"sub_path": "machine/M3D Enabler D8500 0.4 nozzle.json"
 		}
 	],
 	"process_list": [
@@ -25,13 +33,54 @@
 			"sub_path": "process/fdm_process_common.json"
 		},
 		{
-			"name": "0.15mm MM @D8500",
-			"sub_path": "process/0.15mm MM @D8500.json"
+			"name": "0.15mm Standard @M3D Enabler D7500",
+			"sub_path": "process/0.15mm Standard @M3D Enabler D7500.json"
 		},
 		{
-			"name": "0.20mm MM @D8500",
-			"sub_path": "process/0.20mm MM @D8500.json"
+			"name": "0.15mm Standard @M3D Enabler D8500",
+			"sub_path": "process/0.15mm Standard @M3D Enabler D8500.json"
+		},
+		{
+			"name": "0.20mm Standard @M3D Enabler D7500",
+			"sub_path": "process/0.20mm Standard @M3D Enabler D7500.json"
+		},
+		{
+			"name": "0.20mm Standard @M3D Enabler D8500",
+			"sub_path": "process/0.20mm Standard @M3D Enabler D8500.json"
+		},
+		{
+			"name": "Fuzzy Skin @M3D Enabler D8500",
+			"sub_path": "process/Fuzzy Skin @M3D Enabler D8500.json"
+		},
+		{
+			"name": "High Detail (0.12mm) @M3D Enabler D8500",
+			"sub_path": "process/High Detail (0.12mm) @M3D Enabler D8500.json"
+		},
+		{
+			"name": "High Strength @M3D Enabler D8500",
+			"sub_path": "process/High Strength @M3D Enabler D8500.json"
+		},
+		{
+			"name": "Mesh Design @M3D Enabler D8500",
+			"sub_path": "process/Mesh Design @M3D Enabler D8500.json"
+		},
+		{
+			"name": "Rapid Draft (0.28mm) @M3D Enabler D8500",
+			"sub_path": "process/Rapid Draft (0.28mm) @M3D Enabler D8500.json"
+		},
+		{
+			"name": "Vase Mode @M3D Enabler D8500",
+			"sub_path": "process/Vase Mode @M3D Enabler D8500.json"
 		}
 	],
-	"filament_list": []
+	"filament_list": [
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+		{
+			"name": "Enabler PLA @M3D",
+			"sub_path": "filament/Enabler PLA @M3D.json"
+		}
+	]
 }
diff --git a/resources/profiles/M3D/M3D Enabler D7500_cover.png b/resources/profiles/M3D/M3D Enabler D7500_cover.png
new file mode 100644
index 0000000000..a5685815e3
Binary files /dev/null and b/resources/profiles/M3D/M3D Enabler D7500_cover.png differ
diff --git a/resources/profiles/M3D/M3D Enabler D8500 MM Model_bed_model.stl b/resources/profiles/M3D/M3D Enabler D8500 MM Model_bed_model.stl
deleted file mode 100644
index 61bc03695b..0000000000
Binary files a/resources/profiles/M3D/M3D Enabler D8500 MM Model_bed_model.stl and /dev/null differ
diff --git a/resources/profiles/M3D/M3D Enabler D8500 MM Model_bed_texture.svg b/resources/profiles/M3D/M3D Enabler D8500 MM Model_bed_texture.svg
deleted file mode 100644
index 540f20952b..0000000000
--- a/resources/profiles/M3D/M3D Enabler D8500 MM Model_bed_texture.svg	
+++ /dev/null
@@ -1 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 2100 1500"><path d="M34.69,1327.1s5.26,4.07,10.5,10.53c3.23,3.97,8.09,11.83,8.09,11.83v116.7h-18.59v-139.06M194.43,1327.1s-5.26,4.07-10.5,10.53c-3.23,3.97-8.09,11.83-8.09,11.83v116.7h18.59v-139.06M38.45,1266.04s4.43,8.32,5.01,16.59c.58,8.03-1.31,18.51-4.22,24.4-3.06,6.2-6.37,10.75-6.37,10.75,0,0,8.6-.42,15.64.58,7.09,1,14.48,3.22,14.48,3.22,0,0,1.22-5.07.74-12.56-.5-7.78-4.79-20.43-11.66-30.35-6.46-9.33-13.62-12.63-13.62-12.63M21.05,1237.81s1.69,10.46,8.84,16.21c6.46,5.18,15.31,6.45,22.06,14.12,5.81,6.58,8.38,15.65,8.38,15.65,0,0,3.96-14.02-2.32-24.64-5.52-9.32-15.73-12.96-25.48-15.87-6.49-1.96-11.49-5.46-11.49-5.46M190.68,1266.04s-7.16,3.29-13.61,12.63c-6.88,9.92-11.17,22.57-11.67,30.35-.47,7.5.75,12.56.75,12.56,0,0,7.39-2.22,14.48-3.22,7.02-1,15.62-.58,15.62-.58,0,0-3.31-4.56-6.37-10.75-2.9-5.89-4.8-16.37-4.22-24.4.6-8.27,5.01-16.59,5.01-16.59M208.07,1237.81s-5.01,3.51-11.5,5.46c-9.75,2.91-19.96,6.56-25.48,15.87-6.27,10.62-2.32,24.64-2.32,24.64,0,0,2.58-9.07,8.38-15.65,6.76-7.67,15.61-8.93,22.06-14.12,7.15-5.75,8.85-16.21,8.85-16.21M164.36,1325.43c22.33-6.13,31.34-4.14,31.34-4.14,0,0-11.07,8.25-16.7,16.21-4.22,5.95-7.31,11.88-11.75,17.2-3.53,4.25-14.02,9.61-18.61,12.69-2.42,1.62-5.24,3.57-7.19,5.92-1.12,1.34-1.63,3.61-1.63,3.61,0,0,3.32-3.05,6.26-5.02,4.26-2.84,8.19-4.13,8.19-4.13,0,0-3.48,4.42-6.78,9.68-1.44,2.29-1.95,6.89-2.64,13.15-.05.37.7,4.18-2.07,11.04-1.6,3.99-4.17,5.99-4.17,5.99,0,0,.66-1.96.66-2.65s-.37-1.31-.37-1.31c0,0-1.32,2.15-2.98,4.46-1.65,2.32-5.08,4.51-5.08,4.51,0,0,.74.22,1.7,0,.37-.09,1.73-.25,1.73-.25,0,0-.84,3.32-3.06,7.57-3.71,7.11-3.89,11.33-3.89,11.33,0,0-.73-.49-.82-1.57-.08-1.09-.65-1.54-.65-1.54,0,0-.34.35-1.17.31-.83-.05-1.28.11-1.28.11,0,0,3.32,3.17,3.21,13.4-.05,4.68-.78,7.42-2.34,11.43-2.19,5.63-6.52,5.78-9.19,5.78-2.93,0-6.89-.5-9.18-5.78-1.7-3.94-2.29-6.74-2.34-11.43-.11-10.23,3.21-13.4,3.21-13.4,0,0-.46-.15-1.28-.11-.83.04-1.18-.31-1.18-.31,0,0-.56.45-.64,1.55-.08,1.09-.83,1.57-.83,1.57,0,0-.17-4.22-3.89-11.33-2.22-4.24-3.06-7.57-3.06-7.57,0,0,1.37.16,1.74.25.95.22,1.69,0,1.69,0,0,0-3.42-2.19-5.08-4.51-1.65-2.32-2.98-4.46-2.98-4.46,0,0-.36.62-.36,1.31s.66,2.65.66,2.65c0,0-2.57-2.01-4.17-6-2.77-6.86-2.03-10.67-2.08-11.04-.7-6.26-1.21-10.86-2.64-13.15-3.3-5.27-6.78-9.68-6.78-9.68,0,0,3.92,1.29,8.18,4.13,2.95,1.97,6.26,5.02,6.26,5.02,0,0-.51-2.27-1.62-3.61-1.95-2.36-4.78-4.3-7.2-5.93-4.59-3.07-15.08-8.44-18.6-12.68-4.43-5.33-7.47-11.3-11.75-17.2-8.1-11.17-16.7-16.21-16.7-16.21,0,0,9.02-1.99,31.34,4.13,8.11,2.22,17.18,6.19,25.97,11.25,8.93,5.14,17.54,11.43,22.33,20.84,0,0,.54.93.99.93s.99-.93.99-.93c4.79-9.42,13.41-15.71,22.33-20.84,8.78-5.06,17.85-9.03,25.96-11.24M93.84,1401.62c2.26,2.97,6.24,2.15,6.24,2.15,0,0-2.75-1.97-4.57-3.8-1.71-1.71-3.42-3.65-3.42-3.65,0,0-.5,2.32,1.76,5.3M107.38,1444.77c.25,2.38,1.04,2.11,1.04,2.11,0,0-.19-1.05-.24-2.34-.04-1.28.11-2.03.02-3.84-.08-1.88-.66-2.84-.66-2.84,0,0-.28,1.49-.28,2.4s-.15,1.86.12,4.51M113.06,1455.11s-.28-2.21-.11-4.13c.18-1.93.53-3.53.33-5.43-.18-1.9-1.73-3.5-1.73-3.5,0,0-1.96,2.05-2.35,4.91-.47,3.42.94,5.24,1.82,6.45.88,1.22,2.04,1.71,2.04,1.71M114.36,1433.31c.16-2.56-.07-5.07-.07-5.07,0,0-1.65,1.65-1.77,4.78-.15,3.55,1.26,7.48,1.26,7.48,0,0,.41-4.63.58-7.19M114.75,1415.49s2.68-22.76,2.68-26.28c0-4.03-1.95-6.69-2.68-10.88-1.11,3.97-2.81,5.76-2.81,10.69s2.81,26.47,2.81,26.47M115.79,1433.31c.17,2.56.59,7.19.59,7.19,0,0,1.4-3.93,1.26-7.48-.13-3.12-1.78-4.77-1.78-4.77,0,0-.23,2.5-.07,5.06M119.13,1453.4c.88-1.21,2.29-3.03,1.81-6.45-.39-2.86-2.34-4.91-2.34-4.91,0,0-1.55,1.6-1.74,3.5-.19,1.9.17,3.5.33,5.43.16,1.93-.11,4.13-.11,4.13,0,0,1.17-.5,2.05-1.71M122.77,1444.77c.28-2.65.12-3.6.12-4.51s-.29-2.4-.29-2.4c0,0-.57.96-.66,2.84-.08,1.82.07,2.56.02,3.84-.04,1.28-.23,2.34-.23,2.34,0,0,.79.27,1.04-2.11M136.31,1401.62c2.25-2.97,1.76-5.29,1.76-5.29,0,0-1.7,1.93-3.42,3.64-1.83,1.83-4.57,3.8-4.57,3.8,0,0,3.97.83,6.23-2.15M259.06,1361.56c1.63-7.59,7.06-15.72,22.12-15.72s20.63,7.22,20.63,16.36c0,10.09-5.85,14.52-22.82,14.52h-8.86v26.87h12.05c16.99,0,25.33,6.17,25.33,18.94s-9.31,19.39-23.72,19.39c-16.99,0-24.99-7.41-27.6-17.99h-34.86c3.47,24.05,21.09,44.95,60.55,44.95s61.12-19.49,61.12-45.19c0-22.92-15.49-31.38-25.49-34.84v-.43c6.3-2.2,19.8-9.38,19.8-28.33,0-22.58-18.06-40.67-54.98-40.67-40.78,0-55.1,24.23-57.67,42.14h34.41ZM358.04,1466.17h64.37c41.93,0,75.84-28.43,75.84-74.54,0-38-26.56-69.51-75.1-69.51h-65.11v144.05ZM393,1349.03h25.25c29.03.36,42.96,16.89,42.96,43.54,0,30.62-15.23,46.5-43.41,46.5h-24.8v-90.04Z" style="fill:#bcbec0;"/></svg>
\ No newline at end of file
diff --git a/resources/profiles/M3D/M3D Enabler D8500 MM Model_cover.png b/resources/profiles/M3D/M3D Enabler D8500 MM Model_cover.png
deleted file mode 100644
index 0a57d39546..0000000000
Binary files a/resources/profiles/M3D/M3D Enabler D8500 MM Model_cover.png and /dev/null differ
diff --git a/resources/profiles/M3D/M3D Enabler D8500_cover.png b/resources/profiles/M3D/M3D Enabler D8500_cover.png
new file mode 100644
index 0000000000..61591134e6
Binary files /dev/null and b/resources/profiles/M3D/M3D Enabler D8500_cover.png differ
diff --git a/resources/profiles/M3D/filament/Enabler PLA @M3D.json b/resources/profiles/M3D/filament/Enabler PLA @M3D.json
new file mode 100644
index 0000000000..0fe8f52c1a
--- /dev/null
+++ b/resources/profiles/M3D/filament/Enabler PLA @M3D.json	
@@ -0,0 +1,16 @@
+{
+	"type": "filament",
+	"name": "Enabler PLA @M3D",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "9haPEn03qtDSXkKk",
+	"filament_id": "OFefnvF0",
+	"instantiation": "true",
+	"enable_pressure_advance": [
+		"1"
+	],
+	"compatible_printers": [
+		"M3D Enabler D7500 0.4 nozzle",
+		"M3D Enabler D8500 0.4 nozzle"
+	]
+}
diff --git a/resources/profiles/M3D/filament/fdm_filament_pla.json b/resources/profiles/M3D/filament/fdm_filament_pla.json
new file mode 100644
index 0000000000..4a7ee1cb78
--- /dev/null
+++ b/resources/profiles/M3D/filament/fdm_filament_pla.json
@@ -0,0 +1,82 @@
+{
+	"type": "filament",
+	"name": "fdm_filament_pla",
+	"inherits": "fdm_filament_common",
+	"from": "system",
+	"instantiation": "false",
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"temperature_vitrification": [
+		"45"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"nozzle_temperature_range_high": [
+		"240"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"slow_down_layer_time": [
+		"4"
+	],
+	"additional_cooling_fan_speed": [
+		"70"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode\n;{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n;{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n;{endif}\n\n;{if activate_air_filtration[current_extruder] && support_air_filtration}\n;M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n;{endif}"
+	]
+}
diff --git a/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json b/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json
new file mode 100644
index 0000000000..9888c656b8
--- /dev/null
+++ b/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json	
@@ -0,0 +1,136 @@
+{
+	"type": "machine",
+	"name": "M3D Enabler D7500 0.4 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "8bIf0UX18MlL4IsW",
+	"instantiation": "true",
+	"printer_model": "M3D Enabler D7500",
+	"printer_variant": "0.4",
+	"default_print_profile": "0.20mm Standard @M3D Enabler D7500",
+	"default_filament_profile": [
+		"Enabler PLA @M3D"
+	],
+	"auxiliary_fan": "0",
+	"change_filament_gcode": "M18 E",
+	"deretraction_speed": [
+		"50"
+	],
+	"extruder_clearance_height_to_rod": "19",
+	"extruder_clearance_radius": "100",
+	"extruder_colour": [
+		"#FCE94F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_speedup_time": "1",
+	"host_type": "esp3d",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M104 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG1 X0 Y140\nG1 Y150 F4000\nM18 X Y E\nM18 S36000",
+	"machine_load_filament_time": "0.5",
+	"machine_max_acceleration_e": [
+		"10000"
+	],
+	"machine_max_acceleration_x": [
+		"2000"
+	],
+	"machine_max_acceleration_y": [
+		"2000"
+	],
+	"machine_max_acceleration_z": [
+		"400"
+	],
+	"machine_max_speed_e": [
+		"30"
+	],
+	"machine_max_speed_x": [
+		"60"
+	],
+	"machine_max_speed_y": [
+		"60"
+	],
+	"machine_max_speed_z": [
+		"12"
+	],
+	"machine_start_gcode": "M104 S{first_layer_temperature[0]} ; Begin Heating\n\nG91 ; Relative coordinates\nG1 Z10 ; Lift the head abit\nG90 ; Back to absolute coordinates\nG28 ; Home All\nG1 Z10 F500 ; Dont want to burn the bed while heating\nM109 S{first_layer_temperature[0]} ; Wait for pre-heat\n; Prime the extruder\nG92 E0 ; Set Extruder position to be 0\nG1 E5 F100 ; Extrude a bit in the air\nG1 X0 Y5 Z0.1 F500 ; Touch Down\nG92 E0 ; Set Extruder position to be 0\nG1 X100 Z0.3 E10 F500 ; Nozzle wipe\nG92 E0 ; Set Extruder position to be 0",
+	"machine_tool_change_time": "0.5",
+	"machine_unload_filament_time": "0.5",
+	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0",
+	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+	"machine_pause_gcode": "M601",
+	"max_layer_height": [
+		"0.32"
+	],
+	"min_layer_height": [
+		"0.1"
+	],
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"nozzle_type": "brass",
+	"print_host": "m3d-enabler.local",
+	"printable_area": [
+		"0x0",
+		"150x0",
+		"150x150",
+		"0x150"
+	],
+	"printable_height": "150",
+	"printer_settings_id": "M3D Enabler D7500 0.4 nozzle",
+	"retract_before_wipe": [
+		"100%"
+	],
+	"retract_length_toolchange": [
+		"17"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"0"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"18"
+	],
+	"retraction_length": [
+		"4.5"
+	],
+	"retraction_minimum_travel": [
+		"2.5"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"single_extruder_multi_material": "0",
+	"thumbnails": "120x60/PNG",
+	"travel_slope": [
+		"45"
+	],
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0"
+	],
+	"z_hop_types": [
+		"Normal Lift"
+	]
+}
diff --git a/resources/profiles/M3D/machine/M3D Enabler D7500.json b/resources/profiles/M3D/machine/M3D Enabler D7500.json
new file mode 100644
index 0000000000..2657b13506
--- /dev/null
+++ b/resources/profiles/M3D/machine/M3D Enabler D7500.json	
@@ -0,0 +1,10 @@
+{
+	"type": "machine_model",
+	"name": "M3D Enabler D7500",
+	"model_id": "M3D_D7500",
+	"family": "M3D",
+	"machine_tech": "FFF",
+	"nozzle_diameter": "0.4",
+	"bed_texture": "model/M3D_bed_texture.png",
+	"default_materials": "Generic PLA @System"
+}
diff --git a/resources/profiles/M3D/machine/M3D Enabler D8500 MM.json b/resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json
similarity index 92%
rename from resources/profiles/M3D/machine/M3D Enabler D8500 MM.json
rename to resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json
index 6c9d35786c..e57e6aeb8e 100644
--- a/resources/profiles/M3D/machine/M3D Enabler D8500 MM.json	
+++ b/resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json	
@@ -1,12 +1,17 @@
 {
 	"type": "machine",
-	"name": "M3D Enabler D8500 MM",
+	"name": "M3D Enabler D8500 0.4 nozzle",
 	"inherits": "fdm_machine_common",
+	"renamed_from": "M3D Enabler D8500 MM",
 	"from": "system",
-	"setting_id": "AEagqO0H5lE3ndsg",
+	"setting_id": "xdGprcdFiVkG5vT2",
 	"instantiation": "true",
-	"printer_model": "M3D Enabler D8500 MM Model",
+	"printer_model": "M3D Enabler D8500",
 	"printer_variant": "0.4",
+	"default_print_profile": "0.20mm Standard @M3D Enabler D8500",
+	"default_filament_profile": [
+		"Enabler PLA @M3D"
+	],
 	"auxiliary_fan": "1",
 	"change_filament_gcode": "M18 E",
 	"deretraction_speed": [
@@ -89,7 +94,8 @@
 		"210x150",
 		"0x150"
 	],
-	"printer_settings_id": "M3D Enabler D8500 MM",
+	"printable_height": "150",
+	"printer_settings_id": "M3D Enabler D8500 0.4 nozzle",
 	"retract_before_wipe": [
 		"100%",
 		"100%"
diff --git a/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json b/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json
deleted file mode 100644
index d661bed3d1..0000000000
--- a/resources/profiles/M3D/machine/M3D Enabler D8500 MM Model.json	
+++ /dev/null
@@ -1,12 +0,0 @@
-{
-	"type": "machine_model",
-	"name": "M3D Enabler D8500 MM Model",
-	"model_id": "M3D_D8500_MM",
-	"family": "M3D",
-	"machine_tech": "FFF",
-	"nozzle_diameter": "0.4",
-	"bed_model": "M3D Enabler D8500 MM Model_bed_model.stl",
-	"bed_texture": "M3D Enabler D8500 MM Model_bed_texture.svg",
-	"default_materials": "Generic PLA @System",
-	"scan_folder": "1"
-}
diff --git a/resources/profiles/M3D/machine/M3D Enabler D8500.json b/resources/profiles/M3D/machine/M3D Enabler D8500.json
new file mode 100644
index 0000000000..979d62b62d
--- /dev/null
+++ b/resources/profiles/M3D/machine/M3D Enabler D8500.json	
@@ -0,0 +1,11 @@
+{
+	"type": "machine_model",
+	"name": "M3D Enabler D8500",
+	"model_id": "M3D_D8500",
+	"family": "M3D",
+	"machine_tech": "FFF",
+	"nozzle_diameter": "0.4",
+	"bed_model": "model/M3D_bed_model.stl",
+	"bed_texture": "model/M3D_bed_texture.png",
+	"default_materials": "Generic PLA @System"
+}
diff --git a/resources/profiles/M3D/machine/fdm_machine_common.json b/resources/profiles/M3D/machine/fdm_machine_common.json
index 59c44f10f2..6318efdf72 100644
--- a/resources/profiles/M3D/machine/fdm_machine_common.json
+++ b/resources/profiles/M3D/machine/fdm_machine_common.json
@@ -8,118 +8,37 @@
 	"nozzle_diameter": [
 		"0.4"
 	],
-	"printable_area": [
-		"0x0",
-		"210x0",
-		"210x150",
-		"0x150"
-	],
 	"thumbnails": [
 		"16x16"
 	],
-	"auxiliary_fan": "1",
-	"change_filament_gcode": "M18 E",
-	"deretraction_speed": [
-		"50"
-	],
-	"extruder_clearance_height_to_rod": "19",
-	"extruder_clearance_radius": "100",
-	"extruder_colour": [
-		"#FCE94F"
-	],
-	"extruder_offset": [
-		"0x0"
-	],
-	"fan_speedup_time": "1",
-	"host_type": "esp3d",
-	"long_retractions_when_cut": [
-		"0"
-	],
-	"machine_end_gcode": "; ===== ORCA END GCODE =====\nM400\nM83\nG92 E0\nG1 E-17 F1800           ; retract BEFORE any moves or power changes\n\n; Now lift and park\nG91\nG1 Z2 F2000\nG90\nG1 X100 Y160 F3000      ; parking point\n\n; Power down in order\nM104 T0 S0\nM104 T1 S0\nM106 S50                ; keep fan at ~50% while cooling (adjust if desired)\n; (Leave steppers on by omitting M84)\n; ===== END ORCA END GCODE =====\n",
-	"machine_load_filament_time": "0.5",
 	"machine_max_acceleration_e": [
-		"10000"
+		"5000"
 	],
 	"machine_max_acceleration_x": [
-		"2000"
+		"1000"
 	],
 	"machine_max_acceleration_y": [
-		"2000"
+		"1000"
 	],
 	"machine_max_acceleration_z": [
-		"400"
+		"200"
 	],
 	"machine_max_speed_e": [
-		"30"
+		"25"
 	],
 	"machine_max_speed_x": [
-		"400"
+		"200"
 	],
 	"machine_max_speed_y": [
-		"300"
+		"200"
 	],
 	"machine_max_speed_z": [
-		"12"
+		"10"
 	],
-	"machine_start_gcode": "; ===== ORCA START GCODE =====\n; minx:{first_layer_print_min[0]}\n; miny:{first_layer_print_min[1]}\n; maxx:{first_layer_print_max[0]}\n; maxy:{first_layer_print_max[1]}\n; used_0:{is_extruder_used[0]}\n; used_1:{is_extruder_used[1]}\n\n; Heaters\n{if is_extruder_used[0]}M104 T0 S{first_layer_temperature[0]}{endif}\n{if !is_extruder_used[0]}M104 T0 S150{endif}\n{if is_extruder_used[1]}M104 T1 S{first_layer_temperature[1]}{endif}\n{if !is_extruder_used[1]}M104 T1 S150{endif}\nM140 S0\nM106 S50\n\n; Home and clearance\nG28 X Y\nG28 Z\nG91\nG1 Z10 F1200            ; lift 10mm\nG90\n\n; Bed wait (dummy)\nM190 S0\n\n; Wait for target temps\n{if is_extruder_used[0]}M109 T0 S{first_layer_temperature[0]}{endif}\n{if is_extruder_used[1]}M109 T1 S{first_layer_temperature[1]}{endif}\n\n; Absolute XYZ / Relative E\nG90\nM83\n\n; ===== Dynamic Bed Leveling ====\nT0\nG1 Z3 F3000\nG1 X15 Y15 F6000\nG1 Z0.25 F1000; Otherwise Orca displays with a 3mm height\n; Single probe touch\nG30\nM420 S1\n; Bias the contact as -0.25 and fix Z-zero\nG92 Z-0.25        ; probed contact now treated as Z = -0.25\nG1 Z0.3 F300\n\n; ===== PRIME / TWO-LINE WIPES (sparse, no air extrude) =====\n\n; --- Tool 0: lines at Y=5 and Y=6 ---\n{if is_extruder_used[0]}\nT0\nG92 E0\nG1 X20 Y5 F3000\nG1 Z0.30 F600\nG1 X180 E18 F700\nG1 Y6.0 F1200\nG1 X20 E18 F700\nG92 E0\n{endif}\n\n; --- Tool 1: lines at Y=7 and Y=8 ---\n{if is_extruder_used[1]}\nT1\nG92 E0\nG1 X20 Y7 F3000\nG1 Z0.30 F600\nG1 X180 E18 F700\nG1 Y8.0 F1200\nG1 X20 E18 F700\nG92 E0\n{endif}\n\n; Activate initial tool (no retracts; Orca starts immediately)\nT{initial_extruder}\nG92 E0\n; ===== END ORCA START GCODE =====\n",
-	"machine_tool_change_time": "0.5",
-	"machine_unload_filament_time": "0.5",
 	"max_layer_height": [
 		"0.32"
 	],
 	"min_layer_height": [
 		"0.1"
-	],
-	"retract_before_wipe": [
-		"100%"
-	],
-	"retract_length_toolchange": [
-		"17"
-	],
-	"retract_lift_above": [
-		"0"
-	],
-	"retract_lift_below": [
-		"0"
-	],
-	"retract_lift_enforce": [
-		"All Surfaces"
-	],
-	"retract_restart_extra": [
-		"0"
-	],
-	"retract_restart_extra_toolchange": [
-		"0"
-	],
-	"retract_when_changing_layer": [
-		"1"
-	],
-	"retraction_distances_when_cut": [
-		"18"
-	],
-	"retraction_length": [
-		"4.5"
-	],
-	"retraction_minimum_travel": [
-		"2.5"
-	],
-	"retraction_speed": [
-		"60"
-	],
-	"single_extruder_multi_material": "0",
-	"travel_slope": [
-		"45"
-	],
-	"wipe": [
-		"1"
-	],
-	"wipe_distance": [
-		"2"
-	],
-	"z_hop": [
-		"0"
-	],
-	"z_hop_types": [
-		"Normal Lift"
 	]
 }
diff --git a/resources/profiles/M3D/model/M3D_bed_model.stl b/resources/profiles/M3D/model/M3D_bed_model.stl
new file mode 100644
index 0000000000..8ed24335dd
Binary files /dev/null and b/resources/profiles/M3D/model/M3D_bed_model.stl differ
diff --git a/resources/profiles/M3D/model/M3D_bed_texture.png b/resources/profiles/M3D/model/M3D_bed_texture.png
new file mode 100644
index 0000000000..bd0e6b8b80
Binary files /dev/null and b/resources/profiles/M3D/model/M3D_bed_texture.png differ
diff --git a/resources/profiles/M3D/process/0.15mm MM @D8500.json b/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D7500.json
similarity index 86%
rename from resources/profiles/M3D/process/0.15mm MM @D8500.json
rename to resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D7500.json
index d7bcbadab8..9c9ee57b9e 100644
--- a/resources/profiles/M3D/process/0.15mm MM @D8500.json	
+++ b/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D7500.json	
@@ -1,12 +1,12 @@
 {
 	"type": "process",
-	"name": "0.15mm MM @D8500",
+	"name": "0.15mm Standard @M3D Enabler D7500",
 	"inherits": "fdm_process_common",
 	"from": "system",
-	"setting_id": "vVl13K18loFa1fgv",
+	"setting_id": "zphrnDkwB2KgrWyG",
 	"instantiation": "true",
 	"compatible_printers": [
-		"M3D Enabler D8500 MM"
+		"M3D Enabler D7500 0.4 nozzle"
 	],
 	"brim_type": "no_brim",
 	"support_object_first_layer_gap": "1",
@@ -41,5 +41,6 @@
 	"support_type": "normal(manual)",
 	"travel_speed": "100",
 	"wall_loops": "2",
-	"wipe_tower_extra_spacing": "200%"
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
 }
diff --git a/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json b/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json
new file mode 100644
index 0000000000..10c103af8d
--- /dev/null
+++ b/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json	
@@ -0,0 +1,47 @@
+{
+	"type": "process",
+	"name": "0.15mm Standard @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"renamed_from": "0.15mm MM @D8500",
+	"from": "system",
+	"setting_id": "69ArGbue7nQ5gO2r",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "1",
+	"filename_format": "{input_filename_base}_{print_time}.gcode",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "60",
+	"layer_height": "0.15",
+	"outer_wall_speed": "45",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"sparse_infill_density": "5%",
+	"sparse_infill_speed": "60",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"travel_speed": "100",
+	"wall_loops": "2",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/0.20mm MM @D8500.json b/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D7500.json
similarity index 87%
rename from resources/profiles/M3D/process/0.20mm MM @D8500.json
rename to resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D7500.json
index 8dab066799..23abc79f58 100644
--- a/resources/profiles/M3D/process/0.20mm MM @D8500.json	
+++ b/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D7500.json	
@@ -1,12 +1,12 @@
 {
 	"type": "process",
-	"name": "0.20mm MM @D8500",
+	"name": "0.20mm Standard @M3D Enabler D7500",
 	"inherits": "fdm_process_common",
 	"from": "system",
-	"setting_id": "sW4h3MpFpgMeE1pl",
+	"setting_id": "7vI60Hrdn6S3UyjQ",
 	"instantiation": "true",
 	"compatible_printers": [
-		"M3D Enabler D8500 MM"
+		"M3D Enabler D7500 0.4 nozzle"
 	],
 	"brim_type": "no_brim",
 	"support_object_first_layer_gap": "1",
@@ -42,5 +42,6 @@
 	"top_surface_speed": "40",
 	"travel_speed": "100",
 	"wall_loops": "2",
-	"wipe_tower_extra_spacing": "200%"
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
 }
diff --git a/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json b/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json
new file mode 100644
index 0000000000..dabf8c2dd0
--- /dev/null
+++ b/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json	
@@ -0,0 +1,48 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"renamed_from": "0.20mm MM @D8500",
+	"from": "system",
+	"setting_id": "gg3RzTI5TgWRX2Hh",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "1",
+	"filename_format": "{input_filename_base}_{print_time}.gcode",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "60",
+	"layer_height": "0.2",
+	"outer_wall_speed": "45",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"sparse_infill_density": "5%",
+	"sparse_infill_speed": "60",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"top_surface_speed": "40",
+	"travel_speed": "100",
+	"wall_loops": "2",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/Fuzzy Skin @M3D Enabler D8500.json b/resources/profiles/M3D/process/Fuzzy Skin @M3D Enabler D8500.json
new file mode 100644
index 0000000000..b2fe83d8c0
--- /dev/null
+++ b/resources/profiles/M3D/process/Fuzzy Skin @M3D Enabler D8500.json	
@@ -0,0 +1,50 @@
+{
+	"type": "process",
+	"name": "Fuzzy Skin @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "wSzFtN7itr21R1IU",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"layer_height": "0.20",
+	"fuzzy_skin": "allwalls",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"wall_loops": "3",
+	"outer_wall_speed": "30",
+	"filename_format": "{input_filename_base}_Fuzzy_{print_time}.gcode",
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "1",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "60",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"sparse_infill_density": "5%",
+	"sparse_infill_speed": "60",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"top_surface_speed": "40",
+	"travel_speed": "100",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/High Detail (0.12mm) @M3D Enabler D8500.json b/resources/profiles/M3D/process/High Detail (0.12mm) @M3D Enabler D8500.json
new file mode 100644
index 0000000000..5f9a59d0fd
--- /dev/null
+++ b/resources/profiles/M3D/process/High Detail (0.12mm) @M3D Enabler D8500.json	
@@ -0,0 +1,47 @@
+{
+	"type": "process",
+	"name": "High Detail (0.12mm) @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "wPciFcJ3DE0m8zXK",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"brim_type": "no_brim",
+	"layer_height": "0.12",
+	"wall_loops": "3",
+	"outer_wall_speed": "30",
+	"inner_wall_speed": "60",
+	"top_surface_speed": "30",
+	"sparse_infill_speed": "50",
+	"default_acceleration": "800",
+	"outer_wall_acceleration": "500",
+	"enable_support": "0",
+	"sparse_infill_density": "5%",
+	"filename_format": "{input_filename_base}_Detail_{print_time}.gcode",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"internal_solid_infill_speed": "60",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"travel_speed": "100",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/High Strength @M3D Enabler D8500.json b/resources/profiles/M3D/process/High Strength @M3D Enabler D8500.json
new file mode 100644
index 0000000000..98c71fd935
--- /dev/null
+++ b/resources/profiles/M3D/process/High Strength @M3D Enabler D8500.json	
@@ -0,0 +1,50 @@
+{
+	"type": "process",
+	"name": "High Strength @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "02c4AWge1ghZ365R",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"layer_height": "0.20",
+	"wall_loops": "4",
+	"bottom_shell_layers": "4",
+	"top_shell_layers": "4",
+	"sparse_infill_pattern": "gyroid",
+	"sparse_infill_density": "15%",
+	"outer_wall_speed": "40",
+	"inner_wall_speed": "80",
+	"enable_support": "1",
+	"filename_format": "{input_filename_base}_Strong_{print_time}.gcode",
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"internal_solid_infill_speed": "60",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"sparse_infill_speed": "60",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"top_surface_speed": "40",
+	"travel_speed": "100",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/Mesh Design @M3D Enabler D8500.json b/resources/profiles/M3D/process/Mesh Design @M3D Enabler D8500.json
new file mode 100644
index 0000000000..3047dc37be
--- /dev/null
+++ b/resources/profiles/M3D/process/Mesh Design @M3D Enabler D8500.json	
@@ -0,0 +1,49 @@
+{
+	"type": "process",
+	"name": "Mesh Design @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "M9spKPFSnHC6WCf2",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"top_shell_layers": "0",
+	"bottom_shell_layers": "0",
+	"sparse_infill_pattern": "honeycomb",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "1",
+	"filename_format": "{input_filename_base}_{print_time}.gcode",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "60",
+	"layer_height": "0.2",
+	"outer_wall_speed": "45",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"sparse_infill_density": "15%",
+	"sparse_infill_speed": "60",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"top_surface_speed": "40",
+	"travel_speed": "100",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/Rapid Draft (0.28mm) @M3D Enabler D8500.json b/resources/profiles/M3D/process/Rapid Draft (0.28mm) @M3D Enabler D8500.json
new file mode 100644
index 0000000000..5a4ee2ac7d
--- /dev/null
+++ b/resources/profiles/M3D/process/Rapid Draft (0.28mm) @M3D Enabler D8500.json	
@@ -0,0 +1,53 @@
+{
+	"type": "process",
+	"name": "Rapid Draft (0.28mm) @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "2Kk8hmQGrKUokCZQ",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"layer_height": "0.32",
+	"wall_loops": "2",
+	"sparse_infill_pattern": "lightning",
+	"sparse_infill_density": "15%",
+	"sparse_infill_speed": "80",
+	"top_surface_speed": "50",
+	"enable_support": "0",
+	"filename_format": "{input_filename_base}_Draft_{print_time}.gcode",
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_prime_tower": "1",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"travel_speed": "100",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2",
+	"top_shell_layers": "2",
+	"bottom_shell_layers": "2",
+	"enable_overhang_speed": "0",
+	"initial_layer_line_width": "0.4",
+	"inner_wall_line_width": "0.8",
+	"inner_wall_speed": "120",
+	"internal_solid_infill_speed": "75",
+	"line_width": "0.8",
+	"outer_wall_line_width": "0.8",
+	"outer_wall_speed": "90"
+}
diff --git a/resources/profiles/M3D/process/Vase Mode @M3D Enabler D8500.json b/resources/profiles/M3D/process/Vase Mode @M3D Enabler D8500.json
new file mode 100644
index 0000000000..b074b6ddb3
--- /dev/null
+++ b/resources/profiles/M3D/process/Vase Mode @M3D Enabler D8500.json	
@@ -0,0 +1,51 @@
+{
+	"type": "process",
+	"name": "Vase Mode @M3D Enabler D8500",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "RN5U8MVSSjZuzqaG",
+	"instantiation": "true",
+	"compatible_printers": [
+		"M3D Enabler D8500 0.4 nozzle"
+	],
+	"spiral_mode": "1",
+	"layer_height": "0.20",
+	"wall_loops": "1",
+	"top_shell_layers": "0",
+	"bottom_shell_layers": "4",
+	"sparse_infill_density": "0%",
+	"enable_support": "0",
+	"outer_wall_speed": "40",
+	"slowdown_for_curled_perimeters": "0",
+	"filename_format": "{input_filename_base}_Vase_{print_time}.gcode",
+	"brim_type": "no_brim",
+	"support_object_first_layer_gap": "1",
+	"support_object_xy_distance": "0.5",
+	"bridge_acceleration": "50%",
+	"default_acceleration": "1000",
+	"initial_layer_acceleration": "500",
+	"inner_wall_acceleration": "1000",
+	"internal_solid_infill_acceleration": "100%",
+	"outer_wall_acceleration": "1000",
+	"sparse_infill_acceleration": "100%",
+	"top_surface_acceleration": "1000",
+	"travel_acceleration": "1000",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"gap_infill_speed": "60",
+	"initial_layer_speed": "35",
+	"inner_wall_line_width": "0.4",
+	"inner_wall_speed": "90",
+	"internal_solid_infill_speed": "60",
+	"prime_tower_brim_width": "1",
+	"prime_tower_width": "40",
+	"prime_volume": "30",
+	"slow_down_layers": "1",
+	"sparse_infill_speed": "60",
+	"support_interface_speed": "30",
+	"support_type": "normal(manual)",
+	"top_surface_speed": "40",
+	"travel_speed": "100",
+	"wipe_tower_extra_spacing": "200%",
+	"wipe_tower_filament": "2"
+}
diff --git a/resources/profiles/M3D/process/fdm_process_common.json b/resources/profiles/M3D/process/fdm_process_common.json
index 9b4af74c6d..74b9f3d0aa 100644
--- a/resources/profiles/M3D/process/fdm_process_common.json
+++ b/resources/profiles/M3D/process/fdm_process_common.json
@@ -25,5 +25,6 @@
 	"top_surface_speed": "40",
 	"travel_speed": "100",
 	"wall_loops": "2",
+	"skirt_loops": "0",
 	"wipe_tower_extra_spacing": "200%"
 }