mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-13 12:07:41 +00:00
Fix start G-code: wait for nozzle temperature before purge line (#14120)
Several Artillery and Flashforge machine profiles set the first-layer nozzle temperature with M104 (set, no wait) immediately before the purge/prime line. The purge then runs before the nozzle reaches temperature, so filament is extruded through a nozzle that is not yet hot enough to melt it. Changed M104 to M109 so the printer waits for the target temperature before purging. Affected profiles: - Artillery Sidewinder X3 Plus / X3 Pro / X4 Plus / X4 Pro (0.4 nozzle) - Flashforge AD5X (0.25/0.4/0.6/0.8) - Flashforge Adventurer 5M / 5M Pro (0.25/0.8 overrides + shared fdm_adventurer5m_common, which also covers the 0.4/0.6 variants via inheritance) Refs #4337
This commit is contained in:
Indy Jones
@@ -123,7 +123,7 @@
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
|
||||
"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nDRAW_LINE_ONLY",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
|
||||
@@ -126,7 +126,7 @@
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
|
||||
"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nDRAW_LINE_ONLY",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
|
||||
@@ -126,7 +126,7 @@
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20 F4000\nG1 X230 F4000\nG1 Z-1 F600 \nG1 X270 F4000\nG1 Y25 F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
|
||||
"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20 F4000\nG1 X230 F4000\nG1 Z-1 F600 \nG1 X270 F4000\nG1 Y25 F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
|
||||
@@ -126,7 +126,7 @@
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M600",
|
||||
"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
|
||||
"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
|
||||
Reference in New Issue
Block a user