juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-07-28 21:32:11 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fix punctuation, spacing and uppercasing issues (#14848)

Browse Source
This commit is contained in:
Alexandre Folle de Menezes
2026-07-20 09:47:33 -03:00
committed by GitHub
parent 73f6bca9fe
commit b7a6583eea
32 changed files with 291 additions and 363 deletions
Download Patch File Download Diff File Expand all files Collapse all files

27
localization/i18n/ko/OrcaSlicer_ko.po
View File

@@ -7533,10 +7533,10 @@ msgstr "직경 스위치"
msgid "Configuration incompatible"
msgstr "호환되지 않는 구성"
msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing. "
msgid "Filament switcher detected. All AMS filaments are now available for both extruders. The slicer will auto-assign for optimal printing."
msgstr ""
msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use. "
msgid "A filament switcher is detected but not calibrated and thus currently unavailable. Please calibrate it on the printer and synchronize before use."
msgstr ""
msgid "Tips"
@@ -9469,7 +9469,7 @@ msgstr ""
msgid "The nozzle flow setting of %s(%s) doesn't match with the slicing file(%s). Please make sure the nozzle installed matches with settings in printer, then set the corresponding printer preset while slicing."
msgstr "%s(%s)의 노즐 유량 설정이 슬라이싱 파일(%s)과 일치하지 않습니다. 설치된 노즐이 프린터의 설정과 일치하는지 확인한 다음 슬라이싱하는 동안 해당 프린터 프리셋을 설정하세요."
msgid "Tips: If you changed your nozzle of your printer lately, Please go to 'Device -> Printer parts' to change your nozzle setting."
msgid "Tips: If you changed your nozzle of your printer lately, please go to 'Device -> Printer parts' to change your nozzle setting."
msgstr "팁: 최근에 프린터의 노즐을 변경한 경우 '장치 -> 프린터 부품'으로 이동하여 노즐 설정을 변경하세요."
#, c-format, boost-format
@@ -11498,10 +11498,10 @@ msgstr "내부 브릿지"
# TODO: Review, changed by lang refactor. PR 14254
#, boost-format
msgid "Failed to calculate line width of %1%. Cannot get value of “%2%” "
msgid "Failed to calculate line width of %1%. Cannot get value of “%2%”."
msgstr "%1%의 선 너비를 계산하지 못했습니다. \"%2%\"의 값을 가져올 수 없습니다 "
msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width"
msgid "Invalid spacing supplied to Flow::with_spacing(), check your layer height and extrusion width."
msgstr "Flow::with_spacing()에 잘못된 간격이 제공되었습니다. 레이어 높이와 돌출 너비를 확인하세요"
msgid "undefined error"
@@ -12924,7 +12924,7 @@ msgstr ""
msgid ""
"Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n"
"Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane.Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top.The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection."
"Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane. Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top. The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection."
msgstr ""
msgid "Top expansion wall margin"
@@ -19026,7 +19026,7 @@ msgstr ""
msgid "Pack"
msgstr ""
msgid "Cleans and rebuilds system profiles cache on next launch"
msgid "Cleans and rebuilds system profiles cache on next launch."
msgstr ""
msgid "Clean system profiles cache"
@@ -19038,16 +19038,16 @@ msgstr ""
msgid "Loaded profiles overview"
msgstr ""
msgid "This section shows information for loaded profiles"
msgid "This section shows information for loaded profiles."
msgstr ""
msgid "Exports detailed overview of loaded profiles in json format"
msgid "Exports detailed overview of loaded profiles in json format."
msgstr ""
msgid "Configurations folder"
msgstr ""
msgid "Opens configurations folder"
msgid "Opens configurations folder."
msgstr ""
msgid "Log level"
@@ -19062,9 +19062,6 @@ msgstr ""
msgid "Profiles"
msgstr ""
msgid "Select NO to close dialog and review project"
msgstr ""
msgid "No project file on current session. Only logs will be included to package"
msgstr ""
@@ -19726,7 +19723,7 @@ msgstr ""
msgid "Error code not found"
msgstr ""
msgid "The printer is busy, Please check the device page for the file and try to start printing again."
msgid "The printer is busy, please check the device page for the file and try to start printing again."
msgstr ""
msgid "The file is lost, please check and try again."
@@ -22208,7 +22205,7 @@ msgstr ""
#~ "챔버 온도 제어를 위해 이 옵션을 활성화합니다. M191 명령이 \"machine_start_gcode\" 앞에 추가됩니다.\n"
#~ "G코드 명령: M141/M191 S(0-255)"
#~ msgid "Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on. At the same time, the air filtration of ABS and ASA will get worse. While for PLA, PETG, TPU, PVA and other low temperature materials,the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended"
#~ msgid "Higher chamber temperature can help suppress or reduce warping and potentially lead to higher interlayer bonding strength for high temperature materials like ABS, ASA, PC, PA and so on. At the same time, the air filtration of ABS and ASA will get worse. While for PLA, PETG, TPU, PVA and other low temperature materials, the actual chamber temperature should not be high to avoid cloggings, so 0 which stands for turning off is highly recommended"
#~ msgstr "챔버 온도가 높을수록 뒤틀림을 억제하거나 줄이는 데 도움이 될 수 있으며 잠재적으로 ABS, ASA, PC, PA 등과 같은 고온 재료의 층간 결합 강도가 높아질 수 있습니다. 동시에 ABS 및 ASA의 공기 여과는 더욱 악화됩니다. PLA, PETG, TPU, PVA 및 기타 저온 재료의 경우 막힘을 방지하려면 실제 챔버 온도가 높지 않아야 하므로 꺼짐을 의미하는 0을 적극 권장합니다"
#~ msgid "Different nozzle diameters and different filament diameters is not allowed when prime tower is enabled."