mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-19 21:51:06 +00:00
Merge branch 'feat/plugin-feature' into feature/speed-dial
# Conflicts: # src/slic3r/GUI/PluginsDialog.hpp
This commit is contained in:
Andrew committed
commit
b4f6573753
151 files changed
+5116
-1422
No files matched your search
@@ -0,0 +1,5 @@
|
||||
<svg width="24" height="24" viewBox="0 0 24 24" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<circle cx="12" cy="12" r="9.35422" fill="#E14747" stroke="#E14747" stroke-width="1.29157"/>
|
||||
<rect x="11" y="6" width="2" height="9" rx="1" fill="white"/>
|
||||
<rect x="11" y="16" width="2" height="2" rx="1" fill="white"/>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 321 B |
@@ -0,0 +1,4 @@
|
||||
<svg width="24" height="24" viewBox="0 0 24 24" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path fill-rule="evenodd" clip-rule="evenodd" d="M1.80005 12.3C1.80005 6.83238 6.23243 2.4 11.7 2.4C17.1677 2.4 21.6 6.83238 21.6 12.3C21.6 17.7676 17.1677 22.2 11.7 22.2C6.23243 22.2 1.80005 17.7676 1.80005 12.3Z" fill="#009688"/>
|
||||
<path fill-rule="evenodd" clip-rule="evenodd" d="M17.7742 8.66235C18.0746 8.9415 18.0918 9.41131 17.8126 9.7117L12.2128 15.7376C11.5275 16.4751 10.36 16.4751 9.67461 15.7376L6.82482 12.6709C6.54567 12.3706 6.56289 11.9007 6.86328 11.6216C7.16367 11.3424 7.63348 11.3597 7.91263 11.66L10.7624 14.7267C10.8603 14.832 11.0271 14.832 11.125 14.7267L16.7248 8.70081C17.004 8.40042 17.4738 8.3832 17.7742 8.66235Z" fill="white"/>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 759 B |
Binary file not shown.
|
After Width: | Height: | Size: 103 KiB |
@@ -0,0 +1,3 @@
|
||||
<svg width="16" height="16" viewBox="0 0 16 16" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path d="M8.3125 0.7125V2.6125C8.3125 3.00734 7.99484 3.325 7.6 3.325C7.20516 3.325 6.8875 3.00734 6.8875 2.6125V0.7125C6.8875 0.317656 7.20516 0 7.6 0C7.99484 0 8.3125 0.317656 8.3125 0.7125ZM12.9734 3.23297L11.6286 4.57781C11.3495 4.85687 10.8983 4.85687 10.6222 4.57781C10.3461 4.29875 10.3431 3.8475 10.6222 3.57141L11.967 2.22656C12.2461 1.9475 12.6973 1.9475 12.9734 2.22656C13.2495 2.50562 13.2525 2.95688 12.9734 3.23297ZM3.23297 2.22656L4.57781 3.57141C4.85687 3.85047 4.85687 4.30172 4.57781 4.57781C4.29875 4.85391 3.8475 4.85687 3.57141 4.57781L2.22656 3.23297C1.9475 2.95391 1.9475 2.50266 2.22656 2.22656C2.50562 1.95047 2.95688 1.9475 3.23297 2.22656ZM0.7125 6.8875H2.6125C3.00734 6.8875 3.325 7.20516 3.325 7.6C3.325 7.99484 3.00734 8.3125 2.6125 8.3125H0.7125C0.317656 8.3125 0 7.99484 0 7.6C0 7.20516 0.317656 6.8875 0.7125 6.8875ZM12.5875 6.8875H14.4875C14.8823 6.8875 15.2 7.20516 15.2 7.6C15.2 7.99484 14.8823 8.3125 14.4875 8.3125H12.5875C12.1927 8.3125 11.875 7.99484 11.875 7.6C11.875 7.20516 12.1927 6.8875 12.5875 6.8875ZM4.57781 11.6316L3.23297 12.9734C2.95391 13.2525 2.50266 13.2525 2.22656 12.9734C1.95047 12.6944 1.9475 12.2431 2.22656 11.967L3.57141 10.6222C3.85047 10.3431 4.30172 10.3431 4.57781 10.6222C4.85391 10.9012 4.85687 11.3525 4.57781 11.6286V11.6316ZM11.6316 10.6252L12.9734 11.967C13.2525 12.2461 13.2525 12.6973 12.9734 12.9734C12.6944 13.2495 12.2431 13.2525 11.967 12.9734L10.6222 11.6286C10.3431 11.3495 10.3431 10.8983 10.6222 10.6222C10.9012 10.3461 11.3525 10.3431 11.6286 10.6222L11.6316 10.6252ZM8.3125 12.5875V14.4875C8.3125 14.8823 7.99484 15.2 7.6 15.2C7.20516 15.2 6.8875 14.8823 6.8875 14.4875V12.5875C6.8875 12.1927 7.20516 11.875 7.6 11.875C7.99484 11.875 8.3125 12.1927 8.3125 12.5875ZM9.5 7.6C9.5 7.09609 9.29982 6.61282 8.9435 6.2565C8.58718 5.90018 8.10391 5.7 7.6 5.7C7.09609 5.7 6.61282 5.90018 6.2565 6.2565C5.90018 6.61282 5.7 7.09609 5.7 7.6C5.7 8.10391 5.90018 8.58718 6.2565 8.9435C6.61282 9.29982 7.09609 9.5 7.6 9.5C8.10391 9.5 8.58718 9.29982 8.9435 8.9435C9.29982 8.58718 9.5 8.10391 9.5 7.6ZM4.275 7.6C4.275 6.71815 4.62531 5.87243 5.24887 5.24887C5.87243 4.62531 6.71815 4.275 7.6 4.275C8.48184 4.275 9.32757 4.62531 9.95113 5.24887C10.5747 5.87243 10.925 6.71815 10.925 7.6C10.925 8.48184 10.5747 9.32757 9.95113 9.95113C9.32757 10.5747 8.48184 10.925 7.6 10.925C6.71815 10.925 5.87243 10.5747 5.24887 9.95113C4.62531 9.32757 4.275 8.48184 4.275 7.6Z" fill="#F09A17"/>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 2.5 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 21 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 22 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 18 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 20 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 10 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 10 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 7.1 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 11 KiB |
@@ -42,8 +42,8 @@
|
||||
"filament_z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"70"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"3.4"
|
||||
|
||||
@@ -32,6 +32,9 @@
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"95"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
|
||||
@@ -33,6 +33,9 @@
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"16"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"13.3"
|
||||
],
|
||||
|
||||
@@ -45,6 +45,27 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"800"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"165"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"150"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"150"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
|
||||
@@ -24,6 +24,24 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"703"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"16"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
],
|
||||
|
||||
@@ -24,11 +24,20 @@
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"702"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"60",
|
||||
"60",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"50"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"55"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
|
||||
@@ -27,14 +27,26 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"705"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"60",
|
||||
"60",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"50"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
|
||||
@@ -21,11 +21,26 @@
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"701"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"16"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280"
|
||||
|
||||
@@ -27,11 +27,14 @@
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"706"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"4",
|
||||
"12",
|
||||
"4"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
|
||||
@@ -21,6 +21,21 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"65"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"85"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
],
|
||||
|
||||
@@ -38,6 +38,34 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"6"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"55"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"65",
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
|
||||
@@ -4,5 +4,26 @@
|
||||
"inherits": "fdm_filament_pps",
|
||||
"from": "system",
|
||||
"filament_id": "GFT97",
|
||||
"instantiation": "false"
|
||||
"instantiation": "false",
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"85"
|
||||
]
|
||||
}
|
||||
@@ -41,6 +41,30 @@
|
||||
"filament_vendor": [
|
||||
"Polymaker"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"800"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"165"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"150"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"150"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
@@ -83,9 +107,6 @@
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"800"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
]
|
||||
|
||||
@@ -43,6 +43,27 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"200"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"8.0",
|
||||
"12",
|
||||
"8.0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"75"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
|
||||
@@ -43,6 +43,27 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"200"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"8.0",
|
||||
"12",
|
||||
"8.0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"100"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"85"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"85"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
|
||||
@@ -43,6 +43,34 @@
|
||||
"filament_type": [
|
||||
"BVOH"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"65"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"40"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"60",
|
||||
"60",
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
|
||||
@@ -7,6 +7,34 @@
|
||||
"filament_type": [
|
||||
"EVA"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"70"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"40"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"45",
|
||||
"45",
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"50"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
|
||||
@@ -4,9 +4,6 @@
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
@@ -42,6 +39,27 @@
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"798"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"75"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
|
||||
@@ -43,6 +43,30 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"400"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"18"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"165"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"150"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"85",
|
||||
"65",
|
||||
"85"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"150"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
|
||||
@@ -40,6 +40,27 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"500"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"8.0",
|
||||
"12",
|
||||
"8.0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"105"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"90"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"80",
|
||||
"65",
|
||||
"80"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
|
||||
@@ -28,6 +28,37 @@
|
||||
"filament_type": [
|
||||
"PCTG"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"55"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"65",
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
|
||||
@@ -40,6 +40,31 @@
|
||||
"filament_type": [
|
||||
"PE"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"70"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"50"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"45",
|
||||
"45",
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
|
||||
@@ -31,6 +31,34 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"80"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"55"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"65",
|
||||
"55",
|
||||
"55"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
|
||||
@@ -40,6 +40,31 @@
|
||||
"filament_type": [
|
||||
"PHA"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"70"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"45"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"45",
|
||||
"45",
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
|
||||
@@ -37,14 +37,39 @@
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"70"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"45"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"45",
|
||||
"45",
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
|
||||
@@ -43,6 +43,34 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"902"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"70"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1",
|
||||
"0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"60"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"50"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"60",
|
||||
"60",
|
||||
"50",
|
||||
"50"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
|
||||
@@ -46,6 +46,34 @@
|
||||
"filament_vendor": [
|
||||
"Bambu Lab"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"100"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"18"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"165"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"150"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"85",
|
||||
"65",
|
||||
"85"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"150"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
|
||||
@@ -43,6 +43,31 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"801"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"100"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"12",
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_dev_ams_drying_ams_limitations": [],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"165"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"150"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"85",
|
||||
"65",
|
||||
"85"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"150"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"110"
|
||||
],
|
||||
|
||||
@@ -49,6 +49,27 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"704"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"18",
|
||||
"12",
|
||||
"18"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"75"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"40"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"85",
|
||||
"65",
|
||||
"70"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
|
||||
@@ -46,6 +46,30 @@
|
||||
"filament_adhesiveness_category": [
|
||||
"600"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"12",
|
||||
"18",
|
||||
"12",
|
||||
"18"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"16"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"40"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"65",
|
||||
"75",
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
|
||||
@@ -5,10 +5,10 @@
|
||||
"from": "system",
|
||||
"setting_id": "GM045",
|
||||
"instantiation": "true",
|
||||
"change_filament_gcode": "======== X2D filament_change gcode ==========\n;===== 2026/05/15 =====\n\nM620 S[next_filament_id]A B H[next_hotend]\n;M204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.22 I[next_filament_id] P1 ; enable remote extruder runout auto purge.\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if filament_type[next_filament_id] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\nSYNC T{ceil(flush_length / 125) * 5}\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\n\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\n\nM621 S[next_filament_id]A B\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing deLine truncated
|
||||
"layer_change_gcode": ";======== X2D layer_change gcode ==========\n;===== 2026/05/15 =====\n\n{if (layer_num + 1 == 1)}\n{if (overall_chamber_temperature >= 40)}\n ;not reset filter fan in first layer\n ;not reset fan\n{endif}\n{endif}\n\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n\tM106 P10 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[current_filament_id] && additional_fan_full_speed_layer[current_filament_id] > close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n\tM106 P10 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 == max(close_additional_fan_first_x_layers[current_filament_id] + 1, additional_fan_full_speed_layer[current_filament_id]))}\n{if (overall_chamber_temperature < 40)}\n ;updata chamber autocooling in Xth layer\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S35 U{max_additional_fan/100.0} V1.0 O40; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R35 S45 U{max_additional_fan/100.0} V0.5 O50; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 U{max_additional_fan/100.0} V0.5 O55; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n{else}\n ;not reset filter fan in Xth layer\n{endif}\n;not reset fan\n{endif}\n\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n",
|
||||
"change_filament_gcode": "======== X2D filament_change gcode ==========\n;===== 2026/07/01 =====\n\nM620 S[next_filament_id]A B H[next_hotend]\n;M204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.22 I[next_filament_id] P1 ; enable remote extruder runout auto purge.\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if filament_type[next_filament_id] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\nSYNC T{ceil(flush_length / 125) * 5}\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\n\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\n\nM621 S[next_filament_id]A B\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing deLine truncated
|
||||
"layer_change_gcode": ";======== X2D layer_change gcode ==========\n;===== 2026/07/01 =====\n\n{if (layer_num + 1 == 1)}\n{if (overall_chamber_temperature >= 40)}\n ;not reset filter fan in first layer\n ;not reset fan\n{endif}\n{endif}\n\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n\tM106 P10 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[current_filament_id] && additional_fan_full_speed_layer[current_filament_id] > close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n\tM106 P10 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 == max(close_additional_fan_first_x_layers[current_filament_id] + 1, additional_fan_full_speed_layer[current_filament_id]))}\n{if (overall_chamber_temperature < 40)}\n ;updata chamber autocooling in Xth layer\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R40 S45 U{max_additional_fan/100.0} V0.5 O50; set third-party PETG chamber \n {else}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R45 S50 U{max_additional_fan/100.0} V0.5 O50; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R50 S55 U{max_additional_fan/100.0} V0.5 O55; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{else}\n ;not reset filter fan in Xth layer\n{endif}\n;not reset fan\n{endif}\n\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n",
|
||||
"machine_end_gcode": ";======== X2D end gcode ==========\n;===== 2026/05/18 =====\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nM140 S0 ; turn off bed\nM141 S0 ; turn off chamber heating\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P10 S0 ; turn off remote part1 cooling fan\n\n; pull back filament to AMS\nM620 S65279 B\n; M620.11 P1 L0 I65279 E-3\nT65279\nG150.1 F8000\nM621 S65279 B\n\nM620 S65535 B\n; M620.11 P1 L0 I65535 E-4\nT65535\nG150.1 F8000\nM621 S65535 B\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (80.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 80.0 - max_layer_z/2) < 256}\n G1 Z{max_layer_z + 80.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 78.0 - max_layer_z/2}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 256}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P10 S255\nM400 S180\nM106 P10 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S255\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L50 C48 D10 M50 E48 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L50 C60 D10 M50 E60 F10 N50 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n",
|
||||
"machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== X2D start gcode==========\n;===== 2026/05/18 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n ;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M1012.1 T1100\n M620 M ;enable remap\n M622.1 S0\n G383.4\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n;===== reset machine status =================\n\n;==== set airduct mode ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S0 ; turn off auxiliary fan\nM106 P10 S255 ; turn on filter fan\n{else}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P10 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\n;M140 S0 ; stop heatbed from heating\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on auxiliary fan\nM106 P10 S102 ; turn on chamber fan\nM142 P6 R30 S40 U0.6 V0.8 ; set PLA/TPU/PETG exhaust chamber autocooling\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n;===== set chamber temperature ==========\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300 R\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n M972 S26 P0 C0\n G90\n M83\n G1 Y128 F30000\n G1 X128\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n\n M104 S0 T0\n M104 S0 T1\n M562 P1 E0 B1\n M562 P2 E0 B1\n M18 E\n M400 P200\n M1028 S1\n M972 S19 P0 ;heatbed detection\n M972 S31 P0 ;toolhead camera dirt detection\n M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 ;print plate deviation detection\n M1028 S0\n M562 P1 E1 B1\n M562 P2 E1 B1\n M17 D\n\n ;M400\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\n {if max_print_z >= 145}\n G151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-40} A ; rise temp in advance\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzLine truncated
|
||||
"machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== X2D start gcode==========\n;===== 2026/06/05 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n ;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M1012.1 T1100\n M620 M ;enable remap\n M622.1 S0\n G383.4\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n;===== reset machine status =================\n\n;==== set airduct mode ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S0 ; turn off auxiliary fan\nM106 P10 S255 ; turn on filter fan\n{else}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P10 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\n;M140 S0 ; stop heatbed from heating\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on auxiliary fan\nM106 P10 S102 ; turn on chamber fan\nM142 P6 R30 S40 U0.6 V0.8 ; set PLA/TPU/PETG exhaust chamber autocooling\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n;===== set chamber temperature ==========\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300 R\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n M972 S26 P0 C0\n G90\n M83\n G1 Y128 F30000\n G1 X128\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n\n M104 S0 T0\n M104 S0 T1\n M562 P1 E0 B1\n M562 P2 E0 B1\n M18 E\n M400 P200\n M1028 S1\n M972 S19 P0 ;heatbed detection\n M972 S31 P0 ;toolhead camera dirt detection\n M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 ;print plate deviation detection\n M1028 S0\n M562 P1 E1 B1\n M562 P2 E1 B1\n M17 D\n\n ;M400\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\n {if max_print_z >= 145}\n G151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-40} A ; rise temp in advance\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzLine truncated
|
||||
"time_lapse_gcode": ";======== X2D timelapse gcode ========\n;======== 2026/06/03 ========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\n\nM622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {elsif has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G91\n G0 Y-20 F18000\n G90\n M83\n {endif}\n {endif}\nM623\n; SKIPPABLE_END\n",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "0.40mm Standard @Creality K1 SE 0.8 nozzle",
|
||||
"inherits": "fdm_process_creality_common",
|
||||
"from": "system",
|
||||
"setting_id": "caYmVSsFmtESzLNF",
|
||||
"setting_id": "5mfhrVJYlK4lWDUs",
|
||||
"instantiation": "true",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "Qidi",
|
||||
"version": "02.04.00.07",
|
||||
"version": "02.04.00.08",
|
||||
"force_update": "0",
|
||||
"description": "Qidi configurations",
|
||||
"machine_model_list": [
|
||||
|
||||
@@ -10,36 +10,6 @@
|
||||
"machine_pause_gcode": "M0",
|
||||
"support_chamber_temp_control": "1",
|
||||
"wipe_tower_type": "type1",
|
||||
"filament_dev_ams_drying_ams_limitations": [
|
||||
"1"
|
||||
],
|
||||
"filament_dev_ams_drying_temperature": [
|
||||
"40.0",
|
||||
"40.0",
|
||||
"40.0",
|
||||
"40.0"
|
||||
],
|
||||
"filament_dev_ams_drying_time": [
|
||||
"8.0",
|
||||
"8.0",
|
||||
"8.0",
|
||||
"8.0"
|
||||
],
|
||||
"filament_dev_drying_softening_temperature": [
|
||||
"40.0"
|
||||
],
|
||||
"filament_dev_ams_drying_heat_distortion_temperature": [
|
||||
"45.0"
|
||||
],
|
||||
"filament_dev_drying_cooling_temperature": [
|
||||
"35.0"
|
||||
],
|
||||
"filament_dev_chamber_drying_bed_temperature": [
|
||||
"90.0"
|
||||
],
|
||||
"filament_dev_chamber_drying_time": [
|
||||
"12.0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
|
||||
@@ -3,7 +3,7 @@
|
||||
"name": "0.30mm Big @RatRig V-Core 4 0.8",
|
||||
"inherits": "fdm_process_ratrig_common",
|
||||
"from": "system",
|
||||
"setting_id": "7FOG8fkUbrLknvuz",
|
||||
"setting_id": "2tM04aSQ8NcTsmQo",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"inital_layer_height": "0.35",
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
"name": "0.15mm Standard @iQ TiQ2 (0.25 Nozzle)",
|
||||
"inherits": "fdm_process_tiq_common",
|
||||
"from": "system",
|
||||
"setting_id": "PNxZXC0peOlGlKwG",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"iQ TiQ2 0.25 Nozzle"
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
"name": "0.15mm Standard @iQ TiQ8 (0.25 Nozzle)",
|
||||
"inherits": "fdm_process_tiq_common",
|
||||
"from": "system",
|
||||
"setting_id": "K0Ybw0qUqEIL05PY",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"iQ TiQ8 0.25 Nozzle"
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
"name": "0.30mm Standard @iQ TiQ2 (0.6 Nozzle)",
|
||||
"inherits": "fdm_process_tiq_common",
|
||||
"from": "system",
|
||||
"setting_id": "IGN3ZUR73J0veLrE",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"iQ TiQ2 0.6 Nozzle"
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
"name": "0.30mm Standard @iQ TiQ8 (0.6 Nozzle)",
|
||||
"inherits": "fdm_process_tiq_common",
|
||||
"from": "system",
|
||||
"setting_id": "QEODQzrO9UZEgrtB",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"iQ TiQ8 0.6 Nozzle"
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
"name": "0.40mm Standard @iQ TiQ2 (0.8 Nozzle)",
|
||||
"inherits": "fdm_process_tiq_common",
|
||||
"from": "system",
|
||||
"setting_id": "ZoiYkGXOTBh39HTB",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"iQ TiQ2 0.8 Nozzle"
|
||||
|
||||
@@ -3,6 +3,7 @@
|
||||
"name": "0.40mm Standard @iQ TiQ8 (0.8 Nozzle)",
|
||||
"inherits": "fdm_process_tiq_common",
|
||||
"from": "system",
|
||||
"setting_id": "C7TZWdCzQroB8pKL",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"iQ TiQ8 0.8 Nozzle"
|
||||
|
||||
@@ -231,6 +231,8 @@ void main()
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(i, 0)));
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(0, i)));
|
||||
}
|
||||
if (s < 0.01)
|
||||
discard;
|
||||
gl_FragColor = vec4(mix(color.rgb, getBackfaceColor(color.rgb), s), color.a);
|
||||
}
|
||||
#ifdef ENABLE_ENVIRONMENT_MAP
|
||||
|
||||
@@ -30,6 +30,8 @@ uniform mat4 projection_matrix;
|
||||
uniform mat3 view_normal_matrix;
|
||||
uniform mat4 volume_world_matrix;
|
||||
uniform SlopeDetection slope;
|
||||
uniform bool is_outline;
|
||||
uniform vec2 screen_size;
|
||||
|
||||
// Clipping plane, x = min z, y = max z. Used by the FFF and SLA previews to clip with a top / bottom plane.
|
||||
uniform vec2 z_range;
|
||||
@@ -75,6 +77,15 @@ void main()
|
||||
world_normal_z = slope.actived ? (normalize(slope.volume_world_normal_matrix * v_normal)).z : 0.0;
|
||||
|
||||
gl_Position = projection_matrix * position;
|
||||
if (is_outline) {
|
||||
vec3 n = normalize((view_normal_matrix * v_normal).xyz);
|
||||
vec2 dir = normalize(n.xy);
|
||||
if (dot(dir, dir) > 0.0) {
|
||||
//set outline thickness
|
||||
float px = 3.0;
|
||||
gl_Position.xy += dir * (px * 2.0 / screen_size) * gl_Position.w;
|
||||
}
|
||||
}
|
||||
// Fill in the scalars for fragment shader clipping. Fragments with any of these components lower than zero are discarded.
|
||||
clipping_planes_dots = vec3(dot(world_pos, clipping_plane), world_pos.z - z_range.x, z_range.y - world_pos.z);
|
||||
color_clip_plane_dot = dot(world_pos, color_clip_plane);
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
#version 110
|
||||
|
||||
uniform sampler2D Texture;
|
||||
uniform sampler2D s_texture;
|
||||
|
||||
varying vec2 Frag_UV;
|
||||
varying vec4 Frag_Color;
|
||||
|
||||
void main()
|
||||
{
|
||||
gl_FragColor = Frag_Color * texture2D(Texture, Frag_UV.st);
|
||||
gl_FragColor = Frag_Color * texture2D(s_texture, Frag_UV.st);
|
||||
}
|
||||
@@ -273,6 +273,8 @@ void main()
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(i, 0)));
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(0, i)));
|
||||
}
|
||||
if (s < 0.01)
|
||||
discard;
|
||||
gl_FragColor = vec4(mix(shaded_color.rgb, getBackfaceColor(shaded_color.rgb), s), shaded_color.a);
|
||||
}
|
||||
#ifdef ENABLE_ENVIRONMENT_MAP
|
||||
|
||||
@@ -14,6 +14,8 @@ uniform mat4 projection_matrix;
|
||||
uniform mat3 view_normal_matrix;
|
||||
uniform mat4 volume_world_matrix;
|
||||
uniform SlopeDetection slope;
|
||||
uniform bool is_outline;
|
||||
uniform vec2 screen_size;
|
||||
|
||||
// Clipping plane, x = min z, y = max z. Used by the FFF and SLA previews to clip with a top / bottom plane.
|
||||
uniform vec2 z_range;
|
||||
@@ -48,6 +50,15 @@ void main()
|
||||
world_normal_z = slope.actived ? (normalize(slope.volume_world_normal_matrix * v_normal)).z : 0.0;
|
||||
|
||||
gl_Position = projection_matrix * position;
|
||||
if (is_outline) {
|
||||
vec3 n = normalize((view_normal_matrix * v_normal).xyz);
|
||||
vec2 dir = normalize(n.xy);
|
||||
if (dot(dir, dir) > 0.0) {
|
||||
//set outline thickness
|
||||
float px = 3.0;
|
||||
gl_Position.xy += dir * (px * 2.0 / screen_size) * gl_Position.w;
|
||||
}
|
||||
}
|
||||
// Fill in the scalars for fragment shader clipping. Fragments with any of these components lower than zero are discarded.
|
||||
clipping_planes_dots = vec3(dot(world_pos, clipping_plane), world_pos.z - z_range.x, z_range.y - world_pos.z);
|
||||
color_clip_plane_dot = dot(world_pos, color_clip_plane);
|
||||
|
||||
@@ -11,6 +11,7 @@ uniform sampler2D normal_texture;
|
||||
uniform vec2 inv_tex_size;
|
||||
uniform float z_near;
|
||||
uniform float z_far;
|
||||
uniform bool is_outline;
|
||||
|
||||
varying vec2 tex_coord;
|
||||
|
||||
@@ -22,6 +23,10 @@ float linearize_depth(float depth)
|
||||
|
||||
void main()
|
||||
{
|
||||
if (is_outline) {
|
||||
gl_FragColor = vec4(texture2D(color_texture, tex_coord).rgb, 1.0);
|
||||
return;
|
||||
}
|
||||
vec3 base = texture2D(color_texture, tex_coord).rgb;
|
||||
float depth_center = linearize_depth(texture2D(depth_texture, tex_coord).r);
|
||||
|
||||
|
||||
@@ -232,6 +232,8 @@ void main()
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(i, 0)));
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(0, i)));
|
||||
}
|
||||
if (s < 0.01)
|
||||
discard;
|
||||
out_color = vec4(mix(color.rgb, getBackfaceColor(color.rgb), s), color.a);
|
||||
}
|
||||
#ifdef ENABLE_ENVIRONMENT_MAP
|
||||
|
||||
@@ -30,6 +30,8 @@ uniform mat4 projection_matrix;
|
||||
uniform mat3 view_normal_matrix;
|
||||
uniform mat4 volume_world_matrix;
|
||||
uniform SlopeDetection slope;
|
||||
uniform bool is_outline;
|
||||
uniform vec2 screen_size;
|
||||
|
||||
// Clipping plane, x = min z, y = max z. Used by the FFF and SLA previews to clip with a top / bottom plane.
|
||||
uniform vec2 z_range;
|
||||
@@ -75,6 +77,15 @@ void main()
|
||||
world_normal_z = slope.actived ? (normalize(slope.volume_world_normal_matrix * v_normal)).z : 0.0;
|
||||
|
||||
gl_Position = projection_matrix * position;
|
||||
if (is_outline) {
|
||||
vec3 n = normalize((view_normal_matrix * v_normal).xyz);
|
||||
vec2 dir = normalize(n.xy);
|
||||
if (dot(dir, dir) > 0.0) {
|
||||
//set outline thickness
|
||||
float px = 3.0;
|
||||
gl_Position.xy += dir * (px * 2.0 / screen_size) * gl_Position.w;
|
||||
}
|
||||
}
|
||||
// Fill in the scalars for fragment shader clipping. Fragments with any of these components lower than zero are discarded.
|
||||
clipping_planes_dots = vec3(dot(world_pos, clipping_plane), world_pos.z - z_range.x, z_range.y - world_pos.z);
|
||||
color_clip_plane_dot = dot(world_pos, color_clip_plane);
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#version 140
|
||||
|
||||
uniform sampler2D Texture;
|
||||
uniform sampler2D s_texture;
|
||||
|
||||
in vec2 Frag_UV;
|
||||
in vec4 Frag_Color;
|
||||
@@ -9,5 +9,5 @@ out vec4 out_color;
|
||||
|
||||
void main()
|
||||
{
|
||||
out_color = Frag_Color * texture(Texture, Frag_UV.st);
|
||||
out_color = Frag_Color * texture(s_texture, Frag_UV.st);
|
||||
}
|
||||
@@ -277,6 +277,8 @@ void main()
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(i, 0)));
|
||||
s = max(s, DetectSilho(fragCoord.xy + vec2(0, i)));
|
||||
}
|
||||
if (s < 0.01)
|
||||
discard;
|
||||
out_color = vec4(mix(shaded_color.rgb, getBackfaceColor(shaded_color.rgb), s), shaded_color.a);
|
||||
}
|
||||
#ifdef ENABLE_ENVIRONMENT_MAP
|
||||
|
||||
@@ -14,6 +14,8 @@ uniform mat4 projection_matrix;
|
||||
uniform mat3 view_normal_matrix;
|
||||
uniform mat4 volume_world_matrix;
|
||||
uniform SlopeDetection slope;
|
||||
uniform bool is_outline;
|
||||
uniform vec2 screen_size;
|
||||
|
||||
// Clipping plane, x = min z, y = max z. Used by the FFF and SLA previews to clip with a top / bottom plane.
|
||||
uniform vec2 z_range;
|
||||
@@ -48,6 +50,15 @@ void main()
|
||||
world_normal_z = slope.actived ? (normalize(slope.volume_world_normal_matrix * v_normal)).z : 0.0;
|
||||
|
||||
gl_Position = projection_matrix * position;
|
||||
if (is_outline) {
|
||||
vec3 n = normalize((view_normal_matrix * v_normal).xyz);
|
||||
vec2 dir = normalize(n.xy);
|
||||
if (dot(dir, dir) > 0.0) {
|
||||
//set outline thickness
|
||||
float px = 3.0;
|
||||
gl_Position.xy += dir * (px * 2.0 / screen_size) * gl_Position.w;
|
||||
}
|
||||
}
|
||||
// Fill in the scalars for fragment shader clipping. Fragments with any of these components lower than zero are discarded.
|
||||
clipping_planes_dots = vec3(dot(world_pos, clipping_plane), world_pos.z - z_range.x, z_range.y - world_pos.z);
|
||||
color_clip_plane_dot = dot(world_pos, color_clip_plane);
|
||||
|
||||
@@ -10,6 +10,7 @@ uniform sampler2D depth_texture;
|
||||
uniform sampler2D normal_texture;
|
||||
uniform float z_near;
|
||||
uniform float z_far;
|
||||
uniform bool is_outline;
|
||||
|
||||
in vec2 tex_coord;
|
||||
out vec4 frag_color;
|
||||
@@ -22,6 +23,10 @@ float linearize_depth(float depth)
|
||||
|
||||
void main()
|
||||
{
|
||||
if (is_outline) {
|
||||
frag_color = vec4(texture(color_texture, tex_coord).rgb, 1.0);
|
||||
return;
|
||||
}
|
||||
ivec2 pixel = ivec2(gl_FragCoord.xy);
|
||||
float center_depth = linearize_depth(texelFetch(depth_texture, pixel, 0).r);
|
||||
|
||||
|
||||
@@ -1071,7 +1071,7 @@ function RunScriptPlugin(pluginId, capabilityName = "") {
|
||||
if (!plugin || !capability)
|
||||
return;
|
||||
|
||||
SendMessage("run_script_plugin", {
|
||||
SendMessage("run_script_plugin_capability", {
|
||||
plugin_key: pluginId,
|
||||
capability_name: String(capability.name || "")
|
||||
});
|
||||
|
||||
Reference in new issue
Block a user