Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

src/libslic3r/Support/OrganicSupport.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #include "OrganicSupport.hpp"
 #include "SupportCommon.hpp"
 

src/libslic3r/Support/OrganicSupport.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #ifndef slic3r_OrganicSupport_hpp
 #define slic3r_OrganicSupport_hpp
 

src/libslic3r/Support/SupportCommon.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv, Pavel Mikuš @Godrak
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #include "../ClipperUtils.hpp"
 // #include "../ClipperZUtils.hpp"
 #include "../ExtrusionEntityCollection.hpp"

src/libslic3r/Support/SupportCommon.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #ifndef slic3r_SupportCommon_hpp_
 #define slic3r_SupportCommon_hpp_
 

src/libslic3r/Support/SupportDebug.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #if 1 //#ifdef SLIC3R_DEBUG
 
 #include "../ClipperUtils.hpp"

src/libslic3r/Support/SupportDebug.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #ifndef slic3r_SupportCommon_hpp_
 #define slic3r_SupportCommon_hpp_
 

src/libslic3r/Support/SupportLayer.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv, Pavel Mikuš @Godrak
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #ifndef slic3r_SupportLayer_hpp_
 #define slic3r_SupportLayer_hpp_
 

src/libslic3r/Support/SupportMaterial.cpp

@@ -1,9 +1,3 @@
-///|/ Copyright (c) Prusa Research 2016 - 2023 Vojtěch Bubník @bubnikv, Pavel Mikuš @Godrak, Lukáš Hejl @hejllukas, Roman Beránek @zavorka, Lukáš Matěna @lukasmatena, Vojtěch Král @vojtechkral
-///|/ Copyright (c) SuperSlicer 2023 Remi Durand @supermerill
-///|/ Copyright (c) 2016 Sakari Kapanen @Flannelhead
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #include "../ClipperUtils.hpp"
 #include "../ExtrusionEntityCollection.hpp"
 #include "../Layer.hpp"

src/libslic3r/Support/SupportMaterial.hpp

@@ -1,8 +1,3 @@
-///|/ Copyright (c) Prusa Research 2016 - 2023 Vojtěch Bubník @bubnikv, Lukáš Matěna @lukasmatena
-///|/ Copyright (c) Slic3r 2014 Alessandro Ranellucci @alranel
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #ifndef slic3r_SupportMaterial_hpp_
 #define slic3r_SupportMaterial_hpp_
 

src/libslic3r/Support/SupportParameters.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #include "../Print.hpp"
 #include "../PrintConfig.hpp"
 #include "../Slicing.hpp"

src/libslic3r/Support/SupportParameters.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 #ifndef slic3r_SupportParameters_hpp_
 #define slic3r_SupportParameters_hpp_
 

src/libslic3r/Support/TreeModelVolumes.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2022 - 2023 Vojtěch Bubník @bubnikv, Pavel Mikuš @Godrak
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 // Tree supports by Thomas Rahm, losely based on Tree Supports by CuraEngine.
 // Original source of Thomas Rahm's tree supports:
 // https://github.com/ThomasRahm/CuraEngine

src/libslic3r/Support/TreeModelVolumes.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2022 - 2023 Vojtěch Bubník @bubnikv, Oleksandra Iushchenko @YuSanka
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 // Tree supports by Thomas Rahm, losely based on Tree Supports by CuraEngine.
 // Original source of Thomas Rahm's tree supports:
 // https://github.com/ThomasRahm/CuraEngine

src/libslic3r/Support/TreeSupport.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2022 - 2023 Vojtěch Bubník @bubnikv, Lukáš Matěna @lukasmatena, Tomáš Mészáros @tamasmeszaros
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 // Tree supports by Thomas Rahm, losely based on Tree Supports by CuraEngine.
 // Original source of Thomas Rahm's tree supports:
 // https://github.com/ThomasRahm/CuraEngine

src/libslic3r/Support/TreeSupport.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2022 - 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 // Tree supports by Thomas Rahm, losely based on Tree Supports by CuraEngine.
 // Original source of Thomas Rahm's tree supports:
 // https://github.com/ThomasRahm/CuraEngine

src/libslic3r/Support/TreeSupportCommon.cpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 // Tree supports by Thomas Rahm, losely based on Tree Supports by CuraEngine.
 // Original source of Thomas Rahm's tree supports:
 // https://github.com/ThomasRahm/CuraEngine

src/libslic3r/Support/TreeSupportCommon.hpp

@@ -1,7 +1,3 @@
-///|/ Copyright (c) Prusa Research 2023 Vojtěch Bubník @bubnikv
-///|/
-///|/ PrusaSlicer is released under the terms of the AGPLv3 or higher
-///|/
 // Tree supports by Thomas Rahm, losely based on Tree Supports by CuraEngine.
 // Original source of Thomas Rahm's tree supports:
 // https://github.com/ThomasRahm/CuraEngine