Add the Qidi Plus 5 (#15163)

* Add the Qidi Plus 5

* Remove ignored profiles

Qidi didn't register these, so they are essentially dead weight.

* Set Qidi profile version to 02.04.00.10

resources/profiles/Qidi/process/0.10mm Standard @X-Plus 5 0.2 nozzle.json

@@ -0,0 +1,63 @@
+{
+	"type": "process",
+	"setting_id": "3k8N3voNC9Kp0Ov6",
+	"name": "0.10mm Standard @X-Plus 5 0.2 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_process_n_common",
+	"bottom_color_penetration_layers": "5",
+	"bottom_shell_layers": "5",
+	"bridge_flow": "1",
+	"elefant_foot_compensation": "0.15",
+	"enable_arc_fitting": "0",
+	"initial_layer_infill_speed": [
+		"70"
+	],
+	"initial_layer_line_width": "0.25",
+	"initial_layer_print_height": "0.1",
+	"initial_layer_speed": [
+		"40"
+	],
+	"inner_wall_acceleration": [
+		"0"
+	],
+	"inner_wall_line_width": "0.22",
+	"internal_solid_infill_line_width": "0.22",
+	"ironing_flow": "20%",
+	"ironing_speed": "20",
+	"layer_height": "0.1",
+	"line_width": "0.22",
+	"outer_wall_acceleration": [
+		"5000"
+	],
+	"outer_wall_line_width": "0.22",
+	"overhang_1_4_speed": [
+		"60"
+	],
+	"skin_infill_line_width": "0.22",
+	"outer_wall_speed": [
+		"100"
+	],
+	"prime_tower_width": "60",
+	"skeleton_infill_line_width": "0.22",
+	"sparse_infill_line_width": "0.22",
+	"sparse_infill_speed": [
+		"100"
+	],
+	"support_bottom_z_distance": "0.1",
+	"support_line_width": "0.22",
+	"support_top_z_distance": "0.1",
+	"top_color_penetration_layers": "7",
+	"top_shell_layers": "7",
+	"top_surface_line_width": "0.22",
+	"top_surface_speed": [
+		"150"
+	],
+	"travel_speed": [
+		"500"
+	],
+	"wall_loops": "4",
+	"compatible_printers": [
+		"Qidi X-Plus 5 0.2 nozzle"
+	]
+}