ENH: add filament category

Jira: none

Signed-off-by: qing.zhang <qing.zhang@bambulab.com>
Change-Id: I0f31a376527bc540d27c49908712d08bdba3d719
(cherry picked from commit 3f2f704676f0a8a6cf1e43e8b32fd999bcc59d31)

resources/profiles/BBL/filament/Bambu PET-CF @base.json

@@ -87,6 +87,9 @@
     "textured_plate_temp_initial_layer": [
         "100"
     ],
+    "filament_category": [
+        "800"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu Support For PA PET @base.json

@@ -32,5 +32,8 @@
     ],
     "slow_down_layer_time": [
         "6"
+    ],
+    "filament_category": [
+        "703"
     ]
 }

resources/profiles/BBL/filament/Bambu Support For PLA @base.json

@@ -30,6 +30,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "filament_category": [
+        "702"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json

@@ -56,5 +56,8 @@
     ],
     "textured_plate_temp_initial_layer": [
         "60"
+    ],
+    "filament_category": [
+        "705"
     ]
 }

resources/profiles/BBL/filament/Bambu Support G @base.json

@@ -35,5 +35,8 @@
     ],
     "slow_down_layer_time": [
         "6"
+    ],
+    "filament_category": [
+        "701"
     ]
 }

resources/profiles/BBL/filament/Bambu Support W @base.json

@@ -30,6 +30,9 @@
     "slow_down_layer_time": [
         "8"
     ],
+    "filament_category": [
+        "700"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Bambu Support for ABS @base.json

@@ -38,5 +38,8 @@
     ],
     "temperature_vitrification": [
         "90"
+    ],
+    "filament_category": [
+        "706"
     ]
 }

resources/profiles/BBL/filament/Generic BVOH @base.json

@@ -4,5 +4,8 @@
     "inherits": "fdm_filament_bvoh",
     "from": "system",
     "filament_id": "GFS97",
-    "instantiation": "false"
+    "instantiation": "false",
+    "filament_category": [
+        "797"
+    ]
 }

resources/profiles/BBL/filament/Generic PE @base.json

@@ -29,6 +29,9 @@
     "temperature_vitrification": [
         "70"
     ],
+    "filament_category": [
+        "901"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Generic PE-CF @base.json

@@ -32,6 +32,9 @@
     "temperature_vitrification": [
         "70"
     ],
+    "filament_category": [
+        "901"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json

@@ -83,6 +83,9 @@
     "textured_plate_temp_initial_layer": [
         "70"
     ],
+    "filament_category": [
+        "800"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ]

resources/profiles/BBL/filament/fdm_filament_abs.json

@@ -85,6 +85,9 @@
     "textured_plate_temp_initial_layer": [
         "90"
     ],
+    "filament_category": [
+        "200"
+    ],
     "filament_end_gcode": [
         "; filament end gcode \n\n"
     ]

resources/profiles/BBL/filament/fdm_filament_asa.json

@@ -85,6 +85,9 @@
     "textured_plate_temp_initial_layer": [
         "90"
     ],
+    "filament_category": [
+        "200"
+    ],
     "filament_end_gcode": [
         "; filament end gcode \n\n"
     ]

resources/profiles/BBL/filament/fdm_filament_hips.json

@@ -82,6 +82,9 @@
     "textured_plate_temp_initial_layer": [
         "90"
     ],
+    "filament_category": [
+        "798"
+    ],
     "filament_end_gcode": [
         "; filament end gcode \n\n"
     ]

resources/profiles/BBL/filament/fdm_filament_pa.json

@@ -85,6 +85,9 @@
     "textured_plate_temp_initial_layer": [
         "100"
     ],
+    "filament_category": [
+        "400"
+    ],
     "filament_end_gcode": [
         "; filament end gcode \n\n"
     ]

resources/profiles/BBL/filament/fdm_filament_pc.json

@@ -85,6 +85,9 @@
     "textured_plate_temp_initial_layer": [
         "110"
     ],
+    "filament_category": [
+        "500"
+    ],
     "filament_end_gcode": [
         "; filament end gcode \n\n"
     ]

resources/profiles/BBL/filament/fdm_filament_pet.json

@@ -64,6 +64,9 @@
     "textured_plate_temp_initial_layer": [
         "80"
     ],
+    "filament_category": [
+        "300"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ],

resources/profiles/BBL/filament/fdm_filament_pla.json

@@ -76,6 +76,9 @@
     "textured_plate_temp_initial_layer": [
         "55"
     ],
+    "filament_category": [
+        "100"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ],

resources/profiles/BBL/filament/fdm_filament_pp.json

@@ -85,6 +85,9 @@
     "textured_plate_temp_initial_layer": [
         "55"
     ],
+    "filament_category": [
+        "902"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ],

resources/profiles/BBL/filament/fdm_filament_pps.json

@@ -82,6 +82,9 @@
     "textured_plate_temp_initial_layer": [
         "110"
     ],
+    "filament_category": [
+        "801"
+    ],
     "filament_end_gcode": [
         "; filament end gcode \n\n"
     ]

resources/profiles/BBL/filament/fdm_filament_pva.json

@@ -85,6 +85,9 @@
     "textured_plate_temp_initial_layer": [
         "55"
     ],
+    "filament_category": [
+        "704"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ],

resources/profiles/BBL/filament/fdm_filament_tpu.json

@@ -79,6 +79,9 @@
     "textured_plate_temp_initial_layer": [
         "35"
     ],
+    "filament_category": [
+        "600"
+    ],
     "filament_start_gcode": [
         "; filament start gcode\n{if  (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
     ],

src/libslic3r/PrintConfig.cpp

@@ -2285,7 +2285,7 @@ void PrintConfigDef::init_fff_params()
     def->label    = L("Category");
     def->tooltip  = L("Filament category");
     def->min      = 0;
-    def->mode     = comAdvanced;
+    def->mode     = comDevelop;
     def->set_default_value(new ConfigOptionInts{0});
 
     def = this->add("filament_loading_speed", coFloats);