v3.1: OrcaFilamentLibrary re-mint under the product-triple rule

Phase v3.1 of filament_id_plan_v3.md: every OFL-declared filament_id
re-derives from its product triple; the succession ledger absorbs the old
ids. Config-equivalence verified: flattened effective configs differ ONLY
in filament_id (284 consistent old->new changes tree-wide, including every
vendor preset that rides an OFL family), zero config/compatible_printers/
setting_id drift.

Structural pre-step (id-value-neutral, verified): OFL generic family ids
move from the shared fdm_filament_* template bases onto the product-named
"Generic X @System" presets, so the v3 triple's family component is the
product name, not an internal file name (12 relocations; 2 dead duplicate
declarations on fdm_filament_pa/pet pruned; every consumer chain itemized
first - the +12 instantiated_with_id entries are this deliberate pattern,
matching the 11 generics that already declared on @System).
fdm_filament_pc keeps its declaration this phase: 7 Prusa presets (Prusa
Generic PC, Prusament PC Blend) inherit it directly and re-home in the
v3.2 Prusa worksheet; its transitional id is documented in the plan.

Re-mint: 301 declarations re-derived (e.g. Generic PLA OGFL99 ->
OFDSrzZ8 = mint("filament_product/Generic/PLA/Generic PLA")). Snapshot:
1477 ids (+300/-292). Ledger:
- 230 shipped ids retired with mode-rule successors (OGF* library ids,
  OFLSBS99, DREMC/FILAR/AliZ/eSUN/... legacy strings). DREMC010 had been
  shared by a PPA-CF and a TPU family - a data bug this split resolves;
  its successor follows its only shipped claim (DREMC PPA-CF).
- 25 GF-shaped ids OFL had copied from the Bambu catalog (GFOT00x
  Overture, GFSEP0xx) are RELEASED to the BBL island space with hints at
  the re-minted families - never retired, so a future legitimate BBL
  catalog addition is never blocked; plus an explicit GFOT001 ->
  OFxA1p01 hint (Overture PLA Pro, still live in BBL).
- 37 never-shipped v1 branch mints dropped from lineage
  (--forget-never-shipped; they exist in no release, no forwarding
  needed).
- OGFC99/OGFG99/OGFL96/OGFN99/OGFSNL08 stay live (still declared by
  vendor bundles); they retire in v3.2 when those declarers re-mint.

Gates: 106 unit tests OK; --check exit 0; orca_extra_profile_check exit 0;
validator -l 2 / -f tree-wide / -r BBL+Qidi exit 0; Moonraker OFL map
check resolves all 29 aliases against the re-minted presets; flatten
equivalence pre/post as above; snapshot regen idempotent.

filament_id_plan_v3.md

@@ -143,7 +143,11 @@ gains a succession entry pointing at its replacement; the 26 GF-shaped ids OFL d
 (measured at v3.0: only one of them, `GFOT001`, is also declared by BBL) are released to
 the BBL island space with hints at the re-minted families — two-island purity. Snapshot
 regenerated; full gate battery + fixture overlays (this phase touches preset-visibility
-machinery only via ids, but the fixtures are cheap insurance).
+machinery only via ids, but the fixtures are cheap insurance). Implementation notes
+(v3.1, executed): OFL generic ids relocate from the fdm_filament_* template bases onto
+the product-named "Generic X @System" presets first, so their triples carry the product
+name; `fdm_filament_pc` keeps a (transitional) declaration because 7 Prusa presets
+inherit it directly — the v3.2 Prusa worksheet re-homes them and deletes it.
 
 **v3.2 — vendor bundles, worksheet-per-vendor (v1 machinery).** Three sub-cases:
   (a) the **391 unshipped v1 `OF*` mints** re-derive under the triple key — no succession

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PA-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PA-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "AliZ003",
+	"filament_id": "OFd4zw5l",
 	"instantiation": "false",
 	"filament_type": [
 		"PA-CF"

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG @base.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PETG @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "AliZ001",
+	"filament_id": "OFocyw69",
 	"instantiation": "false",
 	"close_fan_the_first_x_layers": [
 		"2"

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-CF @base",
 	"inherits": "AliZ PETG @base",
 	"from": "system",
-	"filament_id": "AZ01-1",
+	"filament_id": "OFJOFnOZ",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
 		"30"

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PETG-Metal @base.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PETG-Metal @base",
 	"inherits": "AliZ PETG @base",
 	"from": "system",
-	"filament_id": "AZ01-2",
+	"filament_id": "OFOABq7t",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
 		"30"

resources/profiles/OrcaFilamentLibrary/filament/AliZ/AliZ PLA @base.json

@@ -3,7 +3,7 @@
 	"name": "AliZ PLA @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "AliZ002",
+	"filament_id": "OFyxayW4",
 	"instantiation": "false",
 	"enable_pressure_advance": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu ABS @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "OGFB00",
+	"filament_id": "OFhuaUQB",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu ABS-GF @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "OGFB50",
+	"filament_id": "OFknl9Iz",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu ASA @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "OGFB01",
+	"filament_id": "OFfBpSRI",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"eng_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu ASA-Aero @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "OGFB02",
+	"filament_id": "OFXzQ4yL",
 	"instantiation": "false",
 	"description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu ASA-CF @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "OGFB51",
+	"filament_id": "OF0wBGNx",
 	"instantiation": "false",
 	"eng_plate_temp": [
 		"100"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PA-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OGFN03",
+	"filament_id": "OFFNYwWR",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PA6-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OGFN05",
+	"filament_id": "OFniMuTN",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PA6-GF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OGFN08",
+	"filament_id": "OFNk8bxk",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PAHT-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OGFN04",
+	"filament_id": "OF2VFe4J",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PC @base",
 	"inherits": "fdm_filament_pc",
 	"from": "system",
-	"filament_id": "OGFC00",
+	"filament_id": "OFKhMPeX",
 	"instantiation": "false",
 	"filament_vendor": [
 		"Bambu Lab"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PC FR @base",
 	"inherits": "fdm_filament_pc",
 	"from": "system",
-	"filament_id": "OGFC01",
+	"filament_id": "OFg57Nmc",
 	"instantiation": "false",
 	"filament_cost": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PET-CF @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OGFT01",
+	"filament_id": "OFHa48An",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"cool_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PETG Basic @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OGFG00",
+	"filament_id": "OFFvzqcd",
 	"instantiation": "false",
 	"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
 	"cool_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PETG HF @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OGFG02",
+	"filament_id": "OFovEIbw",
 	"instantiation": "false",
 	"cool_plate_temp": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PETG Translucent @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OGFG01",
+	"filament_id": "OFwPrlCM",
 	"instantiation": "false",
 	"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
 	"cool_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PETG-CF @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OGFG50",
+	"filament_id": "OFTRZ8Y4",
 	"instantiation": "false",
 	"cool_plate_temp": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Aero @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA11",
+	"filament_id": "OFBSW57R",
 	"instantiation": "false",
 	"description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).",
 	"fan_min_speed": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Basic @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA00",
+	"filament_id": "OFoiVqVM",
 	"instantiation": "false",
 	"filament_cost": [
 		"24.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Dynamic @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA13",
+	"filament_id": "OFDGigEI",
 	"instantiation": "false",
 	"filament_cost": [
 		"31.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Galaxy @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA15",
+	"filament_id": "OFQ3e56w",
 	"instantiation": "false",
 	"filament_cost": [
 		"29.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Glow @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA12",
+	"filament_id": "OFEkPBwx",
 	"instantiation": "false",
 	"filament_cost": [
 		"29.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Impact @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA03",
+	"filament_id": "OFTGHyNC",
 	"instantiation": "false",
 	"filament_cost": [
 		"25.4"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Marble @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA07",
+	"filament_id": "OF9OlTWH",
 	"instantiation": "false",
 	"filament_cost": [
 		"29.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Matte @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA01",
+	"filament_id": "OFXIbw5D",
 	"instantiation": "false",
 	"filament_cost": [
 		"24.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Metal @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA02",
+	"filament_id": "OFrKLeE3",
 	"instantiation": "false",
 	"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Silk @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA05",
+	"filament_id": "OFEGNJD4",
 	"instantiation": "false",
 	"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Silk+ @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA06",
+	"filament_id": "OFUanySo",
 	"instantiation": "false",
 	"description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Sparkle @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA08",
+	"filament_id": "OFDxfPgH",
 	"instantiation": "false",
 	"filament_cost": [
 		"29.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Tough @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA09",
+	"filament_id": "OFaQMgRH",
 	"instantiation": "false",
 	"filament_cost": [
 		"28.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA Wood @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA16",
+	"filament_id": "OFMjtqTC",
 	"instantiation": "false",
 	"filament_cost": [
 		"24.99"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PLA-CF @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFA50",
+	"filament_id": "OFEswT5W",
 	"instantiation": "false",
 	"additional_cooling_fan_speed": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PPA-CF @base",
 	"inherits": "fdm_filament_ppa",
 	"from": "system",
-	"filament_id": "OGFN06",
+	"filament_id": "OF54B0S0",
 	"instantiation": "false",
 	"filament_vendor": [
 		"Bambu Lab"

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PPS-CF @base",
 	"inherits": "fdm_filament_pps",
 	"from": "system",
-	"filament_id": "OGFT02",
+	"filament_id": "OF4RvVuU",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"fan_max_speed": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu PVA @base",
 	"inherits": "fdm_filament_pva",
 	"from": "system",
-	"filament_id": "OGFS04",
+	"filament_id": "OFzyIxba",
 	"instantiation": "false",
 	"description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu Support For PA/PET @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OGFS03",
+	"filament_id": "OFMTK0UC",
 	"instantiation": "false",
 	"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu Support For PLA @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFS02",
+	"filament_id": "OFAnyRUI",
 	"instantiation": "false",
 	"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
 	"cool_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu Support For PLA/PETG @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFS05",
+	"filament_id": "OFIfnzxC",
 	"instantiation": "false",
 	"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu Support G @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OGFS01",
+	"filament_id": "OFQHiNJs",
 	"instantiation": "false",
 	"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
 	"fan_cooling_layer_time": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu Support W @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OGFS00",
+	"filament_id": "OFsHSVZc",
 	"instantiation": "false",
 	"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
 	"cool_plate_temp": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu Support for ABS @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "OGFS06",
+	"filament_id": "OFf6mfQO",
 	"instantiation": "false",
 	"description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.",
 	"fan_max_speed": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu TPU 95A @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "OGFU01",
+	"filament_id": "OFVCkX5w",
 	"instantiation": "false",
 	"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json

@@ -3,7 +3,7 @@
 	"name": "Bambu TPU 95A HF @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "OGFU00",
+	"filament_id": "OFvKUnLh",
 	"instantiation": "false",
 	"description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.",
 	"filament_cost": [

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX ABS @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "CXABSB01",
+	"filament_id": "OF99UMPq",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ABS PRIME @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX ABS PRIME @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "CXABPB09",
+	"filament_id": "OFuWCQXN",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX ASA PRIME @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX ASA PRIME @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "CXASAB04",
+	"filament_id": "OFtpXCCv",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX PA6-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX NYLEX PA6-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "CXPACB23",
+	"filament_id": "OF0NgY1y",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX NYLEX UNFILLED @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX NYLEX UNFILLED @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "CXPAUB21",
+	"filament_id": "OFJs1ToM",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PCTG PRIME @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX PCTG PRIME @base",
 	"inherits": "fdm_filament_pctg",
 	"from": "system",
-	"filament_id": "CXPCTB15",
+	"filament_id": "OFwu7IAG",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PETG @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX PETG @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "CXPETB13",
+	"filament_id": "OFvTVZc3",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX PLA @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "CXPLAB02",
+	"filament_id": "OFhlCNqq",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA PRIME @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX PLA PRIME @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "CXPLAB08",
+	"filament_id": "OFd2vX0G",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX PLA+Silk @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX PLA+Silk @base",
 	"inherits": "fdm_filament_pla_silk",
 	"from": "system",
-	"filament_id": "CXPLSB03",
+	"filament_id": "OF0pzFLc",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 30D @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX TPE 30D @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "CX30DB20",
+	"filament_id": "OFVptRxp",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 40D @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX TPE 40D @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "CX40DB20",
+	"filament_id": "OFfnXFie",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPE 60D @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX TPE 60D @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "CX60DB19",
+	"filament_id": "OFfr4XNO",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/COEX/COEX TPU 60A @base.json

@@ -3,7 +3,7 @@
 	"name": "COEX TPU 60A @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "CX60AB17",
+	"filament_id": "OFE0NFRh",
 	"instantiation": "false",
 	"filament_vendor": [
 		"COEX 3D"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC ABS @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "DREMC003",
+	"filament_id": "OFzrUUxc",
 	"instantiation": "false",
 	"filament_cost": [
 		"24"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC ABS+ @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "DREMC004",
+	"filament_id": "OF99vXPs",
 	"instantiation": "false",
 	"filament_cost": [
 		"24"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC ABS-GF @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "DREMC009",
+	"filament_id": "OFCidU7j",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
 		"12"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC ASA @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "DREMC005",
+	"filament_id": "OFLNgV3C",
 	"instantiation": "false",
 	"eng_plate_temp": [
 		"110"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC ASA CF @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "DREMC012",
+	"filament_id": "OFdI4zMo",
 	"instantiation": "false",
 	"eng_plate_temp": [
 		"110"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC ASA GF @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "DREMC013",
+	"filament_id": "OF2xccEe",
 	"instantiation": "false",
 	"eng_plate_temp": [
 		"110"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PA12-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "DREMC007",
+	"filament_id": "OFEhuUNq",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
 		"15"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PA6-CF @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "DREMC006",
+	"filament_id": "OFsoykbm",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
 		"15"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PET-CF @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "DREMC008",
+	"filament_id": "OFwJ0qu2",
 	"instantiation": "false",
 	"cool_plate_temp": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PETG @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "DREMC002",
+	"filament_id": "OFVBlUFH",
 	"instantiation": "false",
 	"cool_plate_temp": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PLA+ HS @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "DREMC011",
+	"filament_id": "OFJHBEGD",
 	"instantiation": "false",
 	"filament_cost": [
 		"26"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PLA+ @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "DREMC001",
+	"filament_id": "OFSwbBWS",
 	"instantiation": "false",
 	"filament_cost": [
 		"26"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC PPA-CF @base",
 	"inherits": "fdm_filament_ppa",
 	"from": "system",
-	"filament_id": "DREMC010",
+	"filament_id": "OFiWaoqD",
 	"instantiation": "false",
 	"filament_vendor": [
 		"DREMC"

resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @base.json

@@ -3,7 +3,7 @@
 	"name": "DREMC TPU 95A @base",
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
-	"filament_id": "DREMC010",
+	"filament_id": "OFYd5uS3",
 	"instantiation": "false",
 	"filament_cost": [
 		"40"

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas ASA @base.json

@@ -3,7 +3,7 @@
 	"name": "Elas ASA @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "OFT3TqB6",
+	"filament_id": "OFCoRobU",
 	"instantiation": "false",
 	"description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.",
 	"activate_air_filtration": [

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PETG Basic @base.json

@@ -3,7 +3,7 @@
 	"name": "Elas PETG Basic @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OFw4OHWE",
+	"filament_id": "OFXTPuqV",
 	"instantiation": "false",
 	"description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.",
 	"complete_print_exhaust_fan_speed": [

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Basic @base.json

@@ -3,7 +3,7 @@
 	"name": "Elas PLA Basic @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OFbgt3u3",
+	"filament_id": "OFMuXBmO",
 	"instantiation": "false",
 	"activate_air_filtration": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Elas/Elas PLA Pro @base.json

@@ -3,7 +3,7 @@
 	"name": "Elas PLA Pro @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OFrgQ1Ns",
+	"filament_id": "OFaYz8iE",
 	"instantiation": "false",
 	"activate_air_filtration": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ABS @base.json

@@ -3,7 +3,7 @@
 	"name": "Elegoo ABS @base",
 	"inherits": "fdm_filament_abs",
 	"from": "system",
-	"filament_id": "OEABSB00",
+	"filament_id": "OFxOHhZw",
 	"instantiation": "false",
 	"eng_plate_temp": [
 		"90"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA @base.json

@@ -3,7 +3,7 @@
 	"name": "Elegoo ASA @base",
 	"inherits": "fdm_filament_asa",
 	"from": "system",
-	"filament_id": "OEASAB00",
+	"filament_id": "OFobDOW5",
 	"instantiation": "false",
 	"eng_plate_temp": [
 		"90"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA-CF @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo ASA-CF @base",
 	"inherits": "Elegoo ASA @base",
 	"from": "system",
-	"filament_id": "OFpwg2Qh",
+	"filament_id": "OFryjl35",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT @base.json

@@ -3,7 +3,7 @@
 	"name": "Elegoo PAHT @base",
 	"inherits": "fdm_filament_pa",
 	"from": "system",
-	"filament_id": "OEPAHTB0",
+	"filament_id": "OF0h7ERL",
 	"instantiation": "false",
 	"activate_air_filtration": [
 		"1"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC @base.json

@@ -3,7 +3,7 @@
 	"name": "Elegoo PC @base",
 	"inherits": "fdm_filament_pc",
 	"from": "system",
-	"filament_id": "OEPCB00",
+	"filament_id": "OFUyDDNv",
 	"instantiation": "false",
 	"filament_density": [
 		"1.25"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC-FR @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PC-FR @base",
 	"inherits": "Elegoo PC @base",
 	"from": "system",
-	"filament_id": "OF79FFkO",
+	"filament_id": "OFlsTpJG",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PET-CF @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PET-CF @base",
 	"inherits": "Elegoo PETG @base",
 	"from": "system",
-	"filament_id": "OFJIImD5",
+	"filament_id": "OFV5tNw6",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @base.json

@@ -3,7 +3,7 @@
 	"name": "Elegoo PETG @base",
 	"inherits": "fdm_filament_pet",
 	"from": "system",
-	"filament_id": "OEPETGB0",
+	"filament_id": "OFLcd093",
 	"instantiation": "false",
 	"cool_plate_temp": [
 		"0"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG HF @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PETG HF @base",
 	"inherits": "Elegoo PETG @base",
 	"from": "system",
-	"filament_id": "OFzrWlH5",
+	"filament_id": "OFlP3KWq",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PETG PRO @base",
 	"inherits": "Elegoo PETG @base",
 	"from": "system",
-	"filament_id": "OF102WKM",
+	"filament_id": "OFOsHDnB",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG Translucent @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PETG Translucent @base",
 	"inherits": "Elegoo PETG @base",
 	"from": "system",
-	"filament_id": "OFenGPBR",
+	"filament_id": "OF6Ll8lK",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-CF @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PETG-CF @base",
 	"inherits": "Elegoo PETG @base",
 	"from": "system",
-	"filament_id": "OFIGHU7W",
+	"filament_id": "OFuUuIhR",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-GF @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PETG-GF @base",
 	"inherits": "Elegoo PETG @base",
 	"from": "system",
-	"filament_id": "OFMQJToc",
+	"filament_id": "OFmveLWz",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json

@@ -3,7 +3,7 @@
 	"name": "Elegoo PLA @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "OEPLAB00",
+	"filament_id": "OFvgE0Zh",
 	"instantiation": "false",
 	"fan_cooling_layer_time": [
 		"80"

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Basic @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PLA Basic @base",
 	"inherits": "Elegoo PLA @base",
 	"from": "system",
-	"filament_id": "OFICPchn",
+	"filament_id": "OFm06H6V",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Galaxy @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PLA Galaxy @base",
 	"inherits": "Elegoo PLA @base",
 	"from": "system",
-	"filament_id": "OF0M6QAQ",
+	"filament_id": "OFU1zPxE",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Glow @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PLA Glow @base",
 	"inherits": "Elegoo PLA @base",
 	"from": "system",
-	"filament_id": "OFutwD6f",
+	"filament_id": "OFjPXrXO",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Marble @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PLA Marble @base",
 	"inherits": "Elegoo PLA @base",
 	"from": "system",
-	"filament_id": "OF4fgpse",
+	"filament_id": "OFfuhviw",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Matte @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PLA Matte @base",
 	"inherits": "Elegoo PLA @base",
 	"from": "system",
-	"filament_id": "OFQkWxJy",
+	"filament_id": "OFsB2lxm",
 	"instantiation": "false"
 }

resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA PRO @base.json

@@ -3,6 +3,6 @@
 	"name": "Elegoo PLA PRO @base",
 	"inherits": "Elegoo PLA @base",
 	"from": "system",
-	"filament_id": "OFsKqcQW",
+	"filament_id": "OF1hznGB",
 	"instantiation": "false"
 }