juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-08-02 07:42:14 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated profiles for all Creality K-series printers (+CFS-c support) and Creality SparkX i7 support (#13947)

Browse Source 
* v2 updated profiles and fixes

* Add files via upload

fixing timelaps error

* Add files via upload

fix timelapses

* syntax fix

* fixing profil errors

* Add files via upload

fixing

* Add files via upload

fixing errors

* fixing syntax errors

* Add files via upload

syntax fix

* Add files via upload

naming fix

* Update SPARKX startgcode

* Update SPARKX i7 startgcode

* Update SPARKX i7 startgcode

* Update SPARKX i7 startgcode

* delete old file dublicates

* SparkX gcode fix

* indentation fix

* name changes of printers and deleted 2025 versions

* syntax fix

* fixes

* fixes

* profil name fixes and syntax

* fixed naming restored old names, renamed Ender 3 S1 Sonic, fixed Creality.json - used original formating and fixed the printer list order

* syntax

* Add files via upload

syntax, formating

* differences fix

fixing deleted lines in creality.json

* differences fix in creality.json

* Update Creality CR-10 SE.json

* Update Creality CR-10 V3.json

* Update Creality CR-6 Max.json

* Update Creality CR-10 V3.json

* Update Creality CR-6 SE.json

* Update Creality Ender-3 Pro.json

* Update Creality Ender-3 S1 Plus.json

* Update Creality Ender-3 V3 KE.json

* Update Creality Ender-3.json

* Update Creality Ender-5 Pro (2019).json

* Update Creality K1 Max.json

* Update Creality K1.json

* Update Creality K1C.json

* Update Creality K2 Plus.json

* Update Creality K2 Pro.json

* Update Creality K2.json

* filament and process files formating and fixes form comments

* formating fixes

* 0 value fix

* combine filament profiles

* fix deleted filament

* machine files formatting

* machine files formatting

* Update Creality Hi.json change bed type

* Update bed type Creality Ender-5 Max.json

* chore(profiles/Creality): update SPARKX i7 process names

Update the profile names according to the existing ones, according to
layer height vs nozzle diameter:

- 0.10mm @ 0.2: "HighDetail"
- 0.08mm @ 0.4: "SuperDetail"
- 0.12mm @ 0.4: "Fine"
- 0.16mm @ 0.4: "Optimal"
- 0.20mm @ 0.4: "Standard" (maintained)
- 0.24mm @ 0.4: "Draft"
- 0.28mm @ 0.4: "SuperDraft"
- 0.30mm @ 0.6: "Standard" (maintained)
- 0.40mm @ 0.8: "Standard" (maintained)

This leaves the "HueForge" one untouched, that's it's own setting.

* chore(profiles/Creality): update machine with new process name

Matches the default process for the 0.2 nozzle to the renamed process.

* chore(profiles/Creality): update processes on `Creality.json`

Update the main `Creality.json` manifest with the updated process (file)
names.

* Update Creality K1 Max (0.4 nozzle).json

* Update Creality K1 Max (0.6 nozzle).json

* Update Creality K1 Max (0.8 nozzle).json

* delete cr30 and k1 se naming fix

* Update 0.20mm Standard @Creality K1 SE 0.4.json

* Update Creality.json delete duplicat entry

* fixed formatting

* split PR

* formatting fixes

* settings id instead of filament id delete

* Delete Creality.json in wrong location

* delete filament id

* Update Creality SPARKX i7 0.2 nozzle.json

* Update Creality SPARKX i7 0.4 nozzle.json

* Update Creality SPARKX i7 0.6 nozzle.json

* Update Creality SPARKX i7 0.8 nozzle.json

* delete ender 5 files

* delete ender 5 max files

* adding ender 5 max files

* Update Creality Hi 0.6 nozzle.json

* fixes from comments

* fixes from comments

* fixes from comments and adding filamentid back

* tabs formatting fixes

* fixes

* K1C fixes and printer_structure delete undefined

* formatting

* fixes from comments

* fixes from comments

* use original pictures

* naming fixes, Default Filament profile and Filaments fixed

* match order of key process files

* match order in Creality.json and fix Profile error

* order of printers in menu fix and max accel warning fixed

* revert back fixes for warnings

* fix duplicate keys from resolving merging conflicts

---------

Co-authored-by: Alys Andreollo <3528187+alysandreollo@users.noreply.github.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
hamham999
2026-06-06 11:36:12 +02:00
committed by GitHub
parent 94b13120d8
commit abe6f95aae
680 changed files with 114035 additions and 956 deletions
Download Patch File Download Diff File Expand all files Collapse all files

111
resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,111 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality Ender-3 V4",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X215 Y110 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "86.0",
"default_print_profile": "0.20mm Standard @Creality Ender-3 V4 0.4 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "235",
"extruder_clearance_height_to_rod": "35",
"extruder_clearance_radius": "78",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "126",
"machine_max_acceleration_e": "2400",
"machine_max_acceleration_extruding": "12000",
"machine_max_acceleration_retracting": "2400",
"machine_max_acceleration_travel": "12000",
"machine_max_acceleration_x": "12000",
"machine_max_acceleration_y": "12000",
"machine_max_acceleration_z": "1000",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "100",
"machine_max_jerk_y": "100",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "40",
"machine_max_speed_x": "500",
"machine_max_speed_y": "500",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "0",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 X20 Y-1 F30000\nG1 Z0.3 F1200\nG1 X100 E10 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X105 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4*60}\nG1 X110 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)*60}\nG1 X115 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4*60}\nG1 X120 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)*60}\nG1 X125 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4*60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG92 E0\nG1 Z1 F1200",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "165",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Left Upper",
"printable_area": "0x0,220x0,220x220,0x220",
"printable_height": "235",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Generic PLA @Ender-3 V4-all"
],
"deretraction_speed": "40",
"extruder_colour": "\"\"",
"extruder_offset": "0x0",
"max_layer_height": "0.32",
"min_layer_height": "0.08",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": "100%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "234",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "2",
"retraction_speed": "40",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality Ender-3 V4 0.4 nozzle",
"setting_id": "80639"
}

13
resources/profiles/Creality/machine/Creality Ender-3 V4.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality Ender-3 V4",
"nozzle_diameter": "0.4",
"bed_model": "creality_ender3v3_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_ender3v3_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_Ender_3_V4",
"default_materials": "Creality Generic ABS @Ender-3 V4-all;Creality Generic ASA @Ender-3 V4-all;Creality Generic PETG @Ender-3 V4-all;Creality Generic PLA @Ender-3 V4-all;Creality Generic PLA Matte @Ender-3 V4-all;Creality Generic PLA Silk @Ender-3 V4-all;Creality Generic TPU @Ender-3 V4-all"
}

119
resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json Normal file
View File

@@ -0,0 +1,119 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality Ender-5 Max",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "PAUSE",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "86",
"default_print_profile": "0.30mm Standard @Creality Ender-5 Max 0.6 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "1",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "120",
"extruder_clearance_height_to_rod": "35",
"extruder_clearance_radius": "85",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"machine_load_filament_time": "11",
"machine_max_acceleration_e": "30000",
"machine_max_acceleration_extruding": "12000",
"machine_max_acceleration_retracting": "12000",
"machine_max_acceleration_travel": "50000",
"machine_max_acceleration_x": "12000",
"machine_max_acceleration_y": "12000",
"machine_max_acceleration_z": "100",
"machine_max_jerk_e": "6",
"machine_max_jerk_x": "10",
"machine_max_jerk_y": "10",
"machine_max_jerk_z": "4",
"machine_max_speed_e": "30",
"machine_max_speed_x": "1000",
"machine_max_speed_y": "1000",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "0",
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-1.0 Y120 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-1.0 Y245.0 Z0.28 F1500.0 E7 ;Draw the first line \nG1 X-0.6 Y245.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-0.6 Y120 Z0.28 F1500.0 E15 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "1",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,400x0,400x400,0x400",
"printable_height": "400",
"printer_technology": "FFF",
"printer_variant": "0.6",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Hyper PLA @Ender-5Max-all"
],
"deretraction_speed": "30",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"max_layer_height": "0.42",
"min_layer_height": "0.18",
"nozzle_diameter": [
"0.6"
],
"retract_before_wipe": "100%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "399",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"retraction_length": "1",
"retraction_minimum_travel": "2",
"retraction_speed": "30",
"travel_slope": "3",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality Ender-5 Max 0.6 nozzle",
"setting_id": "71211"
}

119
resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json Normal file
View File

@@ -0,0 +1,119 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality Ender-5 Max",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "PAUSE",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "86",
"default_print_profile": "0.40mm Standard @Creality Ender-5 Max 0.8 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "1",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "120",
"extruder_clearance_height_to_rod": "35",
"extruder_clearance_radius": "85",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
"machine_load_filament_time": "11",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "12000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "50000",
"machine_max_acceleration_x": "12000",
"machine_max_acceleration_y": "12000",
"machine_max_acceleration_z": "200",
"machine_max_jerk_e": "3",
"machine_max_jerk_x": "10",
"machine_max_jerk_y": "10",
"machine_max_jerk_z": "3",
"machine_max_speed_e": "30",
"machine_max_speed_x": "1000",
"machine_max_speed_y": "1000",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "0",
"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-1.0 Y120 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-1.0 Y245.0 Z0.28 F1500.0 E7 ;Draw the first line \nG1 X-0.6 Y245.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-0.6 Y120 Z0.28 F1500.0 E15 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "1",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,400x0,400x400,0x400",
"printable_height": "400",
"printer_technology": "FFF",
"printer_variant": "0.8",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Hyper PLA @Ender-5Max-all"
],
"deretraction_speed": "30",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"max_layer_height": "0.56",
"min_layer_height": "0.24",
"nozzle_diameter": [
"0.8"
],
"retract_before_wipe": "100%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "399",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"retraction_length": "1.2",
"retraction_minimum_travel": "2",
"retraction_speed": "30",
"travel_slope": "3",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality Ender-5 Max 0.8 nozzle",
"setting_id": "99719"
}

3
resources/profiles/Creality/machine/Creality Ender-5 Max.json
View File

@@ -2,11 +2,12 @@
"type": "machine_model",
"name": "Creality Ender-5 Max",
"model_id": "Creality-Ender5-Max",
"nozzle_diameter": "0.4",
"nozzle_diameter": "0.8;0.6;0.4",
"machine_tech": "FFF",
"family": "Creality",
"bed_model": "creality_ender5max_buildplate_model.stl",
"bed_texture": "creality_ender5max_buildplate_texture.svg",
"hotend_model": "",
"default_bed_type": "Textured PEI Plate",
"default_materials": "Creality Hyper PLA-CF @Ender-5Max-all;Creality Hyper PLA @Ender-5Max-all;Creality Hyper ABS @Ender-5Max-all;Creality Generic TPU @Ender-5Max-all;Creality Generic ASA @Ender-5Max-all;Creality Silk PLA @Ender-5Max-all;Creality Generic PLA @Ender-5Max-all;Creality Generic PETG @Ender-5Max-all;Creality Generic ABS @Ender-5Max-all;Creality Generic PA @Ender-5Max-all"
}

124
resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json Normal file
View File

@@ -0,0 +1,124 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality Hi",
"printer_structure": "i3",
"default_print_profile": "0.1mm Standard @Creality Hi 0.2 nozzle",
"adaptive_bed_mesh_margin": "0",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "105",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "27",
"extruder_clearance_radius": "55",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "G1 X0 Y180 F8000\nEND_PRINT",
"machine_load_filament_time": "105",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "12000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "12000",
"machine_max_acceleration_y": "12000",
"machine_max_acceleration_z": "500",
"machine_max_jerk_e": "2.5",
"machine_max_jerk_x": "12",
"machine_max_jerk_y": "12",
"machine_max_jerk_z": "2",
"machine_max_speed_e": "50",
"machine_max_speed_x": "300",
"machine_max_speed_y": "300",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "0",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Left Upper",
"print_host": "http://172.23.209.71:4408/",
"print_host_webui": "http://172.23.209.71:4408/",
"printable_area": "0x0,260x0,260x260,0x260",
"printable_height": "300",
"printer_technology": "FFF",
"printer_variant": "0.2",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "1",
"thumbnails": "96x96/PNG, 300x300/PNG",
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "{if !spiral_mode && print_sequence != \"by object\" && layer_num != 0}\n;don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n;time lapse begin\nM5001 G92 E0\nM5001 G17\nM5001 G2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nM5001 G1 X0 Y180 F24000 ; move to safe pos\nM5001 P15\nM5001 M400 P300\nM5001 G92 E0\n;time lapse end\n{endif}",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @Hi-all"
],
"deretraction_speed": "40",
"extruder_colour": "#018001",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"max_layer_height": "0.14",
"min_layer_height": "0.04",
"nozzle_diameter": [
"0.2"
],
"retract_before_wipe": "70%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "259",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"retraction_length": "0.5",
"retraction_minimum_travel": "1",
"retraction_speed": "40",
"travel_slope": "3",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Auto Lift",
"name": "Creality Hi 0.2 nozzle",
"setting_id": "73035"
}

80
resources/profiles/Creality/machine/Creality Hi 0.4 nozzle.json
View File

@@ -38,8 +38,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"12000",
"12000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"12000",
@@ -50,24 +50,24 @@
"12000"
],
"machine_max_acceleration_z": [
"1000",
"1000"
"500",
"500"
],
"machine_max_speed_e": [
"50",
"50"
],
"machine_max_speed_x": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_y": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_z": [
"30",
"30"
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
@@ -118,7 +118,7 @@
"1"
],
"enable_filament_ramming": "0",
"extruder_clearance_height_to_lid": "301",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "27",
"extruder_clearance_radius": "55",
"z_hop": [
@@ -137,10 +137,60 @@
"default_filament_profile": [
"Creality Generic PLA @Hi-all"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "G1 X0 Y180 F8000\nEND_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"96x96/PNG, 300x300/PNG"
]
"96x96",
"300x300"
],
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "105",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Left Upper",
"print_host": "http://172.23.209.71:4408/",
"print_host_webui": "http://172.23.209.71:4408/",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"silent_mode": "0",
"support_chamber_temp_control": "1",
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "{if !spiral_mode && print_sequence != \"by object\" && layer_num != 0}\n;don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n;time lapse begin\nM5001 G92 E0\nM5001 G17\nM5001 G2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nM5001 G1 X0 Y180 F24000 ; move to safe pos\nM5001 P15\nM5001 M400 P300\nM5001 G92 E0\n;time lapse end\n{endif}",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#018001",
"extruder_offset": "0x0",
"retract_lift_above": "0",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"wipe": "1"
}

88
resources/profiles/Creality/machine/Creality Hi 0.6 nozzle.json
View File

@@ -38,8 +38,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"12000",
"12000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"12000",
@@ -50,24 +50,24 @@
"12000"
],
"machine_max_acceleration_z": [
"1000",
"1000"
"500",
"500"
],
"machine_max_speed_e": [
"50",
"50"
],
"machine_max_speed_x": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_y": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_z": [
"30",
"30"
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
@@ -86,18 +86,18 @@
"2"
],
"max_layer_height": [
"0.35"
"0.42"
],
"min_layer_height": [
"0.1"
"0.12"
],
"printer_settings_id": "Creality",
"purge_in_prime_tower": "0",
"retraction_minimum_travel": [
"0.5"
"1"
],
"retract_before_wipe": [
"70%"
"100%"
],
"retraction_length": [
"0.8"
@@ -118,7 +118,7 @@
"1"
],
"enable_filament_ramming": "0",
"extruder_clearance_height_to_lid": "301",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "27",
"extruder_clearance_radius": "55",
"z_hop": [
@@ -137,10 +137,60 @@
"default_filament_profile": [
"Creality Generic PLA @Hi-all"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "G1 X0 Y180 F8000\nEND_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"96x96/PNG, 300x300/PNG"
]
"96x96",
"300x300"
],
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "105",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "0",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Left Upper",
"print_host": "http://172.23.209.71:4408/",
"print_host_webui": "http://172.23.209.71:4408/",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"silent_mode": "0",
"support_chamber_temp_control": "1",
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "{if !spiral_mode && print_sequence != \"by object\" && layer_num != 0}\n;don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n;time lapse begin\nM5001 G92 E0\nM5001 G17\nM5001 G2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nM5001 G1 X0 Y180 F24000 ; move to safe pos\nM5001 P15\nM5001 M400 P300\nM5001 G92 E0\n;time lapse end\n{endif}",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#018001",
"extruder_offset": "0x0",
"retract_lift_above": "0",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"wipe": "1"
}

116
resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json Normal file
View File

@@ -0,0 +1,116 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality Hi",
"printer_structure": "i3",
"default_print_profile": "0.40mm Standard @Creality Hi 0.8 nozzle",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X260 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "105",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "20",
"extruder_clearance_height_to_rod": "27",
"extruder_clearance_radius": "55",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "G1 X0 Y180 F8000\nEND_PRINT",
"machine_load_filament_time": "105",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "12000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "12000",
"machine_max_acceleration_y": "12000",
"machine_max_acceleration_z": "500",
"machine_max_jerk_e": "2.5",
"machine_max_jerk_x": "12",
"machine_max_jerk_y": "12",
"machine_max_jerk_z": "2",
"machine_max_speed_e": "50",
"machine_max_speed_x": "300",
"machine_max_speed_y": "300",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "0",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "183",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Left Upper",
"print_host": "http://172.23.209.71:4408/",
"print_host_webui": "http://172.23.209.71:4408/",
"printable_area": "0x0,260x0,260x260,0x260",
"printable_height": "300",
"printer_technology": "FFF",
"printer_variant": "0.8",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "1",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"time_lapse_gcode": "{if !spiral_mode && print_sequence != \"by object\" && layer_num != 0}\n;don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n;time lapse begin\nM5001 G92 E0\nM5001 G17\nM5001 G2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nM5001 G1 X0 Y180 F24000 ; move to safe pos\nM5001 P15\nM5001 M400 P300\nM5001 G92 E0\n;time lapse end\n{endif}",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @Hi-all"
],
"deretraction_speed": "40",
"extruder_colour": "#018001",
"extruder_offset": "0x0",
"max_layer_height": "0.56",
"min_layer_height": "0.16",
"nozzle_diameter": [
"0.8"
],
"retract_before_wipe": "100%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "299",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "40",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Auto Lift",
"name": "Creality Hi 0.8 nozzle",
"setting_id": "37865"
}

2
resources/profiles/Creality/machine/Creality Hi.json
View File

@@ -2,7 +2,7 @@
"type": "machine_model",
"name": "Creality Hi",
"model_id": "Creality-Hi",
"nozzle_diameter": "0.4;0.6",
"nozzle_diameter": "0.8;0.6;0.4;0.2",
"machine_tech": "FFF",
"family": "Creality",
"bed_model": "creality_hi_buildplate_model.stl",

105
resources/profiles/Creality/machine/Creality K1 (0.4 nozzle).json
View File

@@ -35,8 +35,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -47,8 +47,8 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
@@ -67,20 +67,20 @@
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.3"
@@ -90,16 +90,16 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"0%"
"70%"
],
"retraction_length": [
"0.6"
"0.8"
],
"retract_length_toolchange": [
"1"
"0"
],
"retraction_speed": [
"40"
@@ -109,25 +109,80 @@
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality HF Generic PLA"
"Creality HF Generic PLA"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96",
"300x300"
],
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_unload_filament_time": "0",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"wipe": "1",
"z_hop_types": "Auto Lift"
}

115
resources/profiles/Creality/machine/Creality K1 (0.6 nozzle).json
View File

@@ -35,8 +35,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -47,8 +47,8 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
@@ -67,67 +67,130 @@
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.4"
"0.42"
],
"min_layer_height": [
"0.08"
"0.12"
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
"90%"
],
"retraction_length": [
"0.5"
"1.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality HF Generic PLA"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

113
resources/profiles/Creality/machine/Creality K1 (0.8 nozzle).json
View File

@@ -35,8 +35,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -47,8 +47,8 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
@@ -67,23 +67,23 @@
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.5"
"0.56"
],
"min_layer_height": [
"0.16"
@@ -93,41 +93,104 @@
"2"
],
"retract_before_wipe": [
"0%"
"90%"
],
"retraction_length": [
"0.5"
"2"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality HF Generic PLA"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

104
resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json
View File

@@ -19,7 +19,7 @@
"0x300"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"nozzle_type": "brass",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "1",
@@ -36,8 +36,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -48,8 +48,8 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
@@ -68,20 +68,20 @@
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.3"
@@ -91,16 +91,16 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"0%"
"70%"
],
"retraction_length": [
"0.6"
"0.8"
],
"retract_length_toolchange": [
"1"
"0"
],
"retraction_speed": [
"40"
@@ -110,25 +110,79 @@
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality HF Generic PLA"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96",
"300x300"
],
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x295,300x295,300x300,0x300",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_unload_filament_time": "0",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"retract_lift_above": "0",
"retract_lift_below": "299",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"wipe": "1",
"z_hop_types": "Auto Lift"
}

116
resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json
View File

@@ -19,7 +19,7 @@
"0x300"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"nozzle_type": "brass",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "1",
@@ -36,8 +36,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -48,8 +48,8 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
@@ -68,67 +68,129 @@
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.4"
"0.42"
],
"min_layer_height": [
"0.08"
"0.12"
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
"90%"
],
"retraction_length": [
"0.5"
"1.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality HF Generic PLA"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x295,300x295,300x300,0x300",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_above": "0",
"retract_lift_below": "299",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

110
resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json
View File

@@ -19,7 +19,7 @@
"0x300"
],
"printable_height": "300",
"nozzle_type": "hardened_steel",
"nozzle_type": "brass",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "1",
@@ -48,8 +48,8 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
@@ -68,23 +68,23 @@
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.5"
"0.56"
],
"min_layer_height": [
"0.16"
@@ -94,41 +94,103 @@
"2"
],
"retract_before_wipe": [
"0%"
"90%"
],
"retraction_length": [
"0.5"
"2"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality HF Generic PLA"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x295,300x295,300x300,0x300",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_above": "0",
"retract_lift_below": "299",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

1
resources/profiles/Creality/machine/Creality K1 Max.json
View File

@@ -8,5 +8,6 @@
"bed_model": "creality_k1max_buildplate_model.stl",
"bed_texture": "creality_k1max_buildplate_texture.svg",
"hotend_model": "",
"default_bed_type": "Textured PEI Plate",
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU"
}

113
resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,113 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K1 Max_CFS-C",
"auxiliary_fan": "1",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"default_print_profile": "0.20mm Standard @Creality K1 Max_CFS-C 0.4 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "119",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "300",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "800",
"machine_max_speed_y": "800",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,300x0,300x300,0x300",
"printable_height": "300",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality HF Generic PLA"
],
"deretraction_speed": "40",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.3",
"min_layer_height": "0.08",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": "70%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "299",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "40",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Auto Lift",
"name": "Creality K1 Max_CFS-C 0.4 nozzle",
"setting_id": "81993"
}

13
resources/profiles/Creality/machine/Creality K1 Max_CFS-C.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality K1 Max_CFS-C",
"nozzle_diameter": "0.4",
"bed_model": "creality_k1max_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_k1max_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_K1_Max_CFS_C",
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU"
}

73
resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json
View File

@@ -22,7 +22,7 @@
"nozzle_type": "hardened_steel",
"auxiliary_fan": "0",
"support_air_filtration": "0",
"support_multi_bed_types": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
"5000"
@@ -84,7 +84,7 @@
"5"
],
"max_layer_height": [
"0.32"
"0.3"
],
"min_layer_height": [
"0.08"
@@ -94,7 +94,7 @@
"1"
],
"retract_before_wipe": [
"70%"
"0"
],
"retraction_length": [
"0.8"
@@ -103,14 +103,14 @@
"0"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.4"
],
@@ -123,12 +123,65 @@
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
]
"96x96",
"300x300"
],
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_unload_filament_time": "0",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

113
resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json Normal file
View File

@@ -0,0 +1,113 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K1 SE",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"default_print_profile": "0.30mm Standard @Creality K1 SE 0.6 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "119",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "500",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "800",
"machine_max_speed_y": "800",
"machine_max_speed_z": "30",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,220x0,220x220,0x220",
"printable_height": "250",
"printer_technology": "FFF",
"printer_variant": "0.6",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"deretraction_speed": "30",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.42",
"min_layer_height": "0.12",
"nozzle_diameter": [
"0.6"
],
"retract_before_wipe": "100",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "1",
"retraction_minimum_travel": "1",
"retraction_speed": "30",
"wipe": "1",
"wipe_distance": "1",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality K1 SE 0.6 nozzle",
"setting_id": "22599"
}

113
resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json Normal file
View File

@@ -0,0 +1,113 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K1 SE",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"default_print_profile": "0.40mm Standard @Creality K1 SE 0.8 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "119",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "500",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "800",
"machine_max_speed_y": "800",
"machine_max_speed_z": "30",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "0",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,220x0,220x220,0x220",
"printable_height": "250",
"printer_technology": "FFF",
"printer_variant": "0.8",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"deretraction_speed": "30",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.56",
"min_layer_height": "0.16",
"nozzle_diameter": [
"0.8"
],
"retract_before_wipe": "100",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "30",
"wipe": "1",
"wipe_distance": "1",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality K1 SE 0.8 nozzle",
"setting_id": "56461"
}

3
resources/profiles/Creality/machine/Creality K1 SE.json
View File

@@ -2,11 +2,12 @@
"type": "machine_model",
"name": "Creality K1 SE",
"model_id": "Creality-K1-SE",
"nozzle_diameter": "0.4",
"nozzle_diameter": "0.8;0.6;0.4",
"machine_tech": "FFF",
"family": "Creality",
"bed_model": "creality_k1se_buildplate_model.stl",
"bed_texture": "creality_k1se_buildplate_texture.svg",
"hotend_model": "",
"default_bed_type": "Textured PEI Plate",
"default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
}

112
resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,112 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K1 SE_CFS-C",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"default_print_profile": "0.20mm Standard @Creality K1 SE_CFS-C 0.4 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "119",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "500",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "800",
"machine_max_speed_y": "800",
"machine_max_speed_z": "30",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,220x0,220x220,0x220",
"printable_height": "250",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"deretraction_speed": "30",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.3",
"min_layer_height": "0.08",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": "0",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "30",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality K1 SE_CFS-C 0.4 nozzle",
"setting_id": "98732"
}

13
resources/profiles/Creality/machine/Creality K1 SE_CFS-C.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality K1 SE_CFS-C",
"nozzle_diameter": "0.4",
"bed_model": "creality_k1se_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_k1se_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_K1_SE_CFS_C",
"default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
}

1
resources/profiles/Creality/machine/Creality K1.json
View File

@@ -8,5 +8,6 @@
"bed_model": "creality_k1_buildplate_model.stl",
"bed_texture": "creality_k1_buildplate_texture.svg",
"hotend_model": "",
"default_bed_type": "Textured PEI Plate",
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PC @K1-all;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PETG;Creality Generic TPU"
}

120
resources/profiles/Creality/machine/Creality K1C 0.4 nozzle.json
View File

@@ -19,7 +19,7 @@
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"nozzle_type": "brass",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "1",
@@ -36,8 +36,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -48,40 +48,40 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"800",
"800"
"600",
"600"
],
"machine_max_speed_y": [
"800",
"800"
"600",
"600"
],
"machine_max_speed_z": [
"10",
"10"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
],
"machine_max_jerk_x": [
"12",
"12"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.3"
@@ -91,16 +91,16 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
"1"
],
"retract_before_wipe": [
"0%"
"70%"
],
"retraction_length": [
"0.6"
"0.8"
],
"retract_length_toolchange": [
"1"
"0"
],
"retraction_speed": [
"40"
@@ -110,25 +110,79 @@
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96",
"300x300"
],
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_unload_filament_time": "0",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"wipe": "1",
"z_hop_types": "Auto Lift"
}

128
resources/profiles/Creality/machine/Creality K1C 0.6 nozzle.json
View File

@@ -19,7 +19,7 @@
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"nozzle_type": "brass",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "1",
@@ -36,8 +36,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -48,87 +48,149 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"1000",
"1000"
"600",
"600"
],
"machine_max_speed_y": [
"1000",
"1000"
"600",
"600"
],
"machine_max_speed_z": [
"30",
"30"
"10",
"10"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.4"
"0.42"
],
"min_layer_height": [
"0.08"
"0.12"
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"2"
],
"retract_before_wipe": [
"0%"
"90%"
],
"retraction_length": [
"0.5"
"1.5"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

126
resources/profiles/Creality/machine/Creality K1C 0.8 nozzle.json
View File

@@ -19,7 +19,7 @@
"0x220"
],
"printable_height": "250",
"nozzle_type": "hardened_steel",
"nozzle_type": "brass",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_multi_bed_types": "1",
@@ -36,8 +36,8 @@
"5000"
],
"machine_max_acceleration_travel": [
"9000",
"9000"
"20000",
"20000"
],
"machine_max_acceleration_x": [
"20000",
@@ -48,43 +48,43 @@
"20000"
],
"machine_max_acceleration_z": [
"500",
"500"
"300",
"300"
],
"machine_max_speed_e": [
"100",
"100"
],
"machine_max_speed_x": [
"1000",
"1000"
"600",
"600"
],
"machine_max_speed_y": [
"1000",
"1000"
"600",
"600"
],
"machine_max_speed_z": [
"30",
"30"
"10",
"10"
],
"machine_max_jerk_e": [
"2.5",
"2.5"
"10",
"10"
],
"machine_max_jerk_x": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_y": [
"12",
"12"
"20",
"20"
],
"machine_max_jerk_z": [
"2",
"2"
"5",
"5"
],
"max_layer_height": [
"0.5"
"0.56"
],
"min_layer_height": [
"0.16"
@@ -94,41 +94,103 @@
"2"
],
"retract_before_wipe": [
"0%"
"90%"
],
"retraction_length": [
"0.5"
"2"
],
"retract_length_toolchange": [
"1"
],
"retraction_speed": [
"40"
"30"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "45",
"extruder_clearance_radius": "65",
"z_hop": [
"0.2"
"0.4"
],
"wipe_distance": [
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "1",
"change_filament_gcode": "PAUSE",
"manual_filament_change": "0",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"machine_pause_gcode": "PAUSE",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"scan_first_layer": "0",
"thumbnails": [
"100x100",
"320x320"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"color_bed_exclude_area": "0x215,220x215,220x220,0x220",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"enable_long_retraction_when_cut": "0",
"extra_loading_move": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "119",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "0",
"silent_mode": "0",
"support_chamber_temp_control": "0",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

1
resources/profiles/Creality/machine/Creality K1C.json
View File

@@ -8,5 +8,6 @@
"bed_model": "creality_k1c_buildplate_model.stl",
"bed_texture": "creality_k1c_buildplate_texture.svg",
"hotend_model": "",
"default_bed_type": "Textured PEI Plate",
"default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
}

113
resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,113 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K1C_CFS-C",
"auxiliary_fan": "1",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"default_print_profile": "0.20mm Standard @Creality K1C_CFS-C 0.4 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "119",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "300",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "600",
"machine_max_speed_y": "600",
"machine_max_speed_z": "10",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,220x0,220x220,0x220",
"printable_height": "250",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"deretraction_speed": "40",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.3",
"min_layer_height": "0.08",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": "70%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "40",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Auto Lift",
"name": "Creality K1C_CFS-C 0.4 nozzle",
"setting_id": "73280"
}

13
resources/profiles/Creality/machine/Creality K1C_CFS-C.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality K1C_CFS-C",
"nozzle_diameter": "0.4",
"bed_model": "creality_k1c_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_k1c_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_K1C_CFS_C",
"default_materials": "Creality Generic ABS @K1-all;Creality Generic ASA @K1-all;Creality Generic PA-CF @K1-all;Creality Generic PC @K1-all;Creality Generic PETG @K1-all;Creality Generic PLA @K1-all;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PLA-CF @K1-all;Creality Generic TPU @K1-all"
}

113
resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,113 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K1_CFS-C",
"auxiliary_fan": "1",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "119",
"default_print_profile": "0.20mm Standard @Creality K1_CFS-C 0.4 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "119",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "300",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "800",
"machine_max_speed_y": "800",
"machine_max_speed_z": "20",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "brass",
"nozzle_volume": "200",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,220x0,220x220,0x220",
"printable_height": "250",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @K1-all"
],
"deretraction_speed": "40",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.3",
"min_layer_height": "0.08",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": "70%",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "249",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "40",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Auto Lift",
"name": "Creality K1_CFS-C 0.4 nozzle",
"setting_id": "62995"
}

13
resources/profiles/Creality/machine/Creality K1_CFS-C.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality K1_CFS-C",
"nozzle_diameter": "0.4",
"bed_model": "creality_k1_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_k1_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_K1_CFS_C",
"default_materials": "Creality Generic ABS;Creality Generic ASA;Creality Generic PC @K1-all;Creality Generic PLA;Creality HF Generic PLA;Creality HF Generic Speed PLA;Creality Generic PLA High Speed @K1-all;Creality Generic PLA Matte @K1-all;Creality Generic PLA Silk @K1-all;Creality Generic PETG;Creality Generic TPU"
}

2
resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json
View File

@@ -103,7 +103,7 @@
"printer_technology": "FFF",
"printer_variant": "0.2",
"printhost_authorization_type": "key",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",

46
resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json
View File

@@ -8,10 +8,10 @@
"printer_settings_id": "Creality",
"auxiliary_fan": "1",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"default_print_profile": "0.16mm Standard @Creality K2 0.4 nozzle",
"default_print_profile": "0.20mm Standard @Creality K2 0.4 nozzle",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
@@ -23,8 +23,8 @@
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "0",
"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
"machine_load_filament_time": "86",
"machine_max_acceleration_e": [
"5000",
"5000"
@@ -86,7 +86,7 @@
"5"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y130 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y130 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X130 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_type": "hardened_steel",
@@ -103,16 +103,16 @@
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": [
"300x300",
"96x96"
"96x96",
"300x300"
],
"thumbnails_format": "PNG",
"use_firmware_retraction": "0",
@@ -140,7 +140,7 @@
"0.4"
],
"retract_before_wipe": [
"70%"
"70"
],
"retract_length_toolchange": [
"0"
@@ -178,5 +178,29 @@
"z_hop": [
"0.4"
],
"name": "Creality K2 0.4 nozzle"
"name": "Creality K2 0.4 nozzle",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"best_object_pos": "0.5,0.5",
"creality_flush_time": "86",
"disable_m73": "0",
"enable_long_retraction_when_cut": "2",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"nozzle_hrc": "0",
"prime_tower_position_type": "Middle Upper",
"printhost_ssl_ignore_revoke": "0",
"time_cost": "0",
"long_retractions_when_cut": "1",
"retract_lift_enforce": "All Surfaces",
"retraction_distances_when_cut": "30",
"z_hop_types": "Auto Lift",
"setting_id": "91520"
}

54
resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json
View File

@@ -8,7 +8,7 @@
"printer_settings_id": "Creality",
"auxiliary_fan": "1",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"default_print_profile": "0.30mm Standard @Creality K2 0.6 nozzle",
@@ -23,8 +23,8 @@
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "0",
"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
"machine_load_filament_time": "86",
"machine_max_acceleration_e": [
"5000",
"5000"
@@ -86,7 +86,7 @@
"5"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y130 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y130 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X130 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_type": "hardened_steel",
@@ -103,16 +103,16 @@
"printer_technology": "FFF",
"printer_variant": "0.6",
"printhost_authorization_type": "key",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": [
"300x300",
"96x96"
"96x96/PNG",
"300x300/PNG"
],
"thumbnails_format": "PNG",
"use_firmware_retraction": "0",
@@ -122,7 +122,7 @@
"Creality Generic PLA @K2-all"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_colour": [
"#FCE94F"
@@ -140,7 +140,7 @@
"0.6"
],
"retract_before_wipe": [
"70%"
"90%"
],
"retract_length_toolchange": [
"0"
@@ -164,10 +164,10 @@
"1.5"
],
"retraction_minimum_travel": [
"1"
"2"
],
"retraction_speed": [
"40"
"30"
],
"wipe": [
"1"
@@ -178,5 +178,33 @@
"z_hop": [
"0.4"
],
"name": "Creality K2 0.6 nozzle"
"name": "Creality K2 0.6 nozzle",
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"best_object_pos": "0.5,0.5",
"creality_flush_time": "86",
"disable_m73": "0",
"enable_long_retraction_when_cut": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"pellet_modded_printer": "0",
"prime_tower_position_type": "Middle Upper",
"printhost_ssl_ignore_revoke": "0",
"time_cost": "0",
"long_retractions_when_cut": "0",
"retract_lift_enforce": "All Surfaces",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"z_hop_types": "Slope Lift"
}

56
resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json
View File

@@ -8,7 +8,7 @@
"printer_settings_id": "Creality",
"auxiliary_fan": "1",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y140 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"default_print_profile": "0.40mm Standard @Creality K2 0.8 nozzle",
@@ -23,8 +23,8 @@
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "0",
"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
"machine_load_filament_time": "86",
"machine_max_acceleration_e": [
"5000",
"5000"
@@ -86,7 +86,7 @@
"5"
],
"machine_pause_gcode": "PAUSE",
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y130 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y130 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X130 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_type": "hardened_steel",
@@ -103,16 +103,16 @@
"printer_technology": "FFF",
"printer_variant": "0.8",
"printhost_authorization_type": "key",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": [
"300x300",
"96x96"
"96x96/PNG",
"300x300/PNG"
],
"thumbnails_format": "PNG",
"use_firmware_retraction": "0",
@@ -122,7 +122,7 @@
"Creality Generic PLA @K2-all"
],
"deretraction_speed": [
"40"
"30"
],
"extruder_colour": [
"#FCE94F"
@@ -140,7 +140,7 @@
"0.8"
],
"retract_before_wipe": [
"70%"
"90%"
],
"retract_length_toolchange": [
"0"
@@ -161,13 +161,13 @@
"1"
],
"retraction_length": [
"3"
"2"
],
"retraction_minimum_travel": [
"1"
"2"
],
"retraction_speed": [
"40"
"30"
],
"wipe": [
"1"
@@ -178,5 +178,33 @@
"z_hop": [
"0.4"
],
"name": "Creality K2 0.8 nozzle"
"name": "Creality K2 0.8 nozzle",
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"best_object_pos": "0.5,0.5",
"creality_flush_time": "86",
"disable_m73": "0",
"enable_long_retraction_when_cut": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"pellet_modded_printer": "0",
"prime_tower_position_type": "Middle Upper",
"printhost_ssl_ignore_revoke": "0",
"time_cost": "0",
"long_retractions_when_cut": "0",
"retract_lift_enforce": "All Surfaces",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"z_hop_types": "Slope Lift"
}

34
resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json
View File

@@ -50,12 +50,12 @@
"30000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
"1000",
"1000"
],
"machine_max_speed_e": [
"50",
"50"
"10",
"10"
],
"machine_max_speed_x": [
"800",
@@ -66,24 +66,24 @@
"800"
],
"machine_max_speed_z": [
"10",
"10"
"30",
"30"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_y": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_z": [
"5",
"5"
"30",
"30"
],
"max_layer_height": [
"0.3"
@@ -102,7 +102,7 @@
"0.5"
],
"retract_length_toolchange": [
"0"
"2"
],
"retraction_speed": [
"40"
@@ -129,14 +129,14 @@
"0.4"
],
"wipe_distance": [
"1"
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "0",
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
@@ -146,5 +146,7 @@
"thumbnails": [
"300x300",
"96x96"
]
],
"machine_unload_filament_time": "28",
"machine_load_filament_time": "26"
}

32
resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json
View File

@@ -50,12 +50,12 @@
"30000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
"1000",
"1000"
],
"machine_max_speed_e": [
"50",
"50"
"10",
"10"
],
"machine_max_speed_x": [
"800",
@@ -66,24 +66,24 @@
"800"
],
"machine_max_speed_z": [
"10",
"10"
"30",
"30"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_y": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_z": [
"5",
"5"
"30",
"30"
],
"max_layer_height": [
"0.3"
@@ -102,7 +102,7 @@
"0.8"
],
"retract_length_toolchange": [
"0"
"2"
],
"retraction_speed": [
"40"
@@ -136,7 +136,7 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
@@ -146,5 +146,7 @@
"thumbnails": [
"300x300",
"96x96"
]
],
"machine_unload_filament_time": "28",
"machine_load_filament_time": "26"
}

36
resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json
View File

@@ -50,12 +50,12 @@
"30000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
"1000",
"1000"
],
"machine_max_speed_e": [
"50",
"50"
"10",
"10"
],
"machine_max_speed_x": [
"800",
@@ -66,24 +66,24 @@
"800"
],
"machine_max_speed_z": [
"10",
"10"
"30",
"30"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_y": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_z": [
"5",
"5"
"30",
"30"
],
"max_layer_height": [
"0.42"
@@ -99,10 +99,10 @@
"70%"
],
"retraction_length": [
"0.5"
"1.5"
],
"retract_length_toolchange": [
"0"
"2"
],
"retraction_speed": [
"40"
@@ -129,14 +129,14 @@
"0.4"
],
"wipe_distance": [
"1"
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "0",
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
@@ -146,5 +146,7 @@
"thumbnails": [
"300x300",
"96x96"
]
],
"machine_unload_filament_time": "28",
"machine_load_filament_time": "26"
}

36
resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json
View File

@@ -50,12 +50,12 @@
"30000"
],
"machine_max_acceleration_z": [
"5000",
"5000"
"1000",
"1000"
],
"machine_max_speed_e": [
"50",
"50"
"10",
"10"
],
"machine_max_speed_x": [
"800",
@@ -66,24 +66,24 @@
"800"
],
"machine_max_speed_z": [
"10",
"10"
"30",
"30"
],
"machine_max_jerk_e": [
"10",
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_y": [
"20",
"20"
"300",
"300"
],
"machine_max_jerk_z": [
"5",
"5"
"30",
"30"
],
"max_layer_height": [
"0.56"
@@ -99,10 +99,10 @@
"70%"
],
"retraction_length": [
"0.5"
"3"
],
"retract_length_toolchange": [
"0"
"2"
],
"retraction_speed": [
"40"
@@ -129,14 +129,14 @@
"0.4"
],
"wipe_distance": [
"1"
"2"
],
"single_extruder_multi_material": "1",
"manual_filament_change": "0",
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
@@ -146,5 +146,7 @@
"thumbnails": [
"300x300",
"96x96"
]
],
"machine_unload_filament_time": "28",
"machine_load_filament_time": "26"
}

1
resources/profiles/Creality/machine/Creality K2 Plus.json
View File

@@ -8,5 +8,6 @@
"bed_model": "creality_k2plus_buildplate_model.stl",
"bed_texture": "creality_k2plus_buildplate_texture.svg",
"hotend_model": "",
"default_bed_type": "Textured PEI Plate",
"default_materials": "Creality Generic ABS @K2-all;Creality Generic ASA @K2-all;Creality Generic PETG @K2-all;Creality Generic PLA @K2-all;Creality Generic PLA High Speed @K2-all;Creality Generic PLA Matte @K2-all;Creality Generic PLA Silk @K2-all"
}

2
resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json
View File

@@ -117,7 +117,7 @@
"299"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",

74
resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json
View File

@@ -7,7 +7,7 @@
"instantiation": "true",
"printer_model": "Creality K2 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.16mm Optimal @Creality K2 Pro 0.4 nozzle",
"default_print_profile": "0.20mm Standard @Creality K2 Pro 0.4 nozzle",
"nozzle_diameter": [
"0.4"
],
@@ -23,7 +23,7 @@
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
@@ -74,12 +74,12 @@
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"100",
"100"
],
"machine_max_jerk_y": [
"20",
"20"
"100",
"100"
],
"machine_max_jerk_z": [
"5",
@@ -117,7 +117,7 @@
"299"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@@ -136,15 +136,63 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\n\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"scan_first_layer": "0",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"best_object_pos": "0.5,0.5",
"creality_flush_time": "86",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_long_retraction_when_cut": "2",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "86",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"silent_mode": "0",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Auto Lift"
}

76
resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json
View File

@@ -7,7 +7,7 @@
"instantiation": "true",
"printer_model": "Creality K2 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.24mm Optimal @Creality K2 Pro 0.6 nozzle",
"default_print_profile": "0.30mm Standard @Creality K2 Pro 0.6 nozzle",
"nozzle_diameter": [
"0.6"
],
@@ -23,7 +23,7 @@
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
@@ -74,12 +74,12 @@
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"100",
"100"
],
"machine_max_jerk_y": [
"20",
"20"
"100",
"100"
],
"machine_max_jerk_z": [
"5",
@@ -93,7 +93,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"1"
"2"
],
"retract_before_wipe": [
"90%"
@@ -117,7 +117,7 @@
"299"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@@ -136,15 +136,63 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\n\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"scan_first_layer": "0",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"best_object_pos": "0.5,0.5",
"creality_flush_time": "86",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_long_retraction_when_cut": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "86",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"silent_mode": "0",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

76
resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json
View File

@@ -7,7 +7,7 @@
"instantiation": "true",
"printer_model": "Creality K2 Pro",
"gcode_flavor": "klipper",
"default_print_profile": "0.32mm Optimal @Creality K2 Pro 0.8 nozzle",
"default_print_profile": "0.40mm Standard @Creality K2 Pro 0.8 nozzle",
"nozzle_diameter": [
"0.8"
],
@@ -23,7 +23,7 @@
"nozzle_volume": "183",
"auxiliary_fan": "1",
"support_air_filtration": "1",
"support_chamber_temp_control": "1",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"machine_max_acceleration_e": [
"5000",
@@ -74,12 +74,12 @@
"10"
],
"machine_max_jerk_x": [
"20",
"20"
"100",
"100"
],
"machine_max_jerk_y": [
"20",
"20"
"100",
"100"
],
"machine_max_jerk_z": [
"5",
@@ -93,7 +93,7 @@
],
"printer_settings_id": "Creality",
"retraction_minimum_travel": [
"1"
"2"
],
"retract_before_wipe": [
"90%"
@@ -117,7 +117,7 @@
"299"
],
"enable_filament_ramming": "0",
"purge_in_prime_tower": "0",
"purge_in_prime_tower": "1",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"parking_pos_retraction": "0",
@@ -136,15 +136,63 @@
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\n\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "END_PRINT",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
"machine_pause_gcode": "PAUSE",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"scan_first_layer": "0",
"thumbnails_format": "PNG",
"thumbnails": [
"300x300",
"96x96"
]
"96x96/PNG",
"300x300/PNG"
],
"adaptive_bed_mesh_margin": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"best_object_pos": "0.5,0.5",
"creality_flush_time": "86",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_long_retraction_when_cut": "0",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"machine_LED_light_exist": "1",
"machine_load_filament_time": "86",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_platform_motion_enable": "1",
"machine_ptc_exist": "1",
"machine_tool_change_time": "0",
"machine_unload_filament_time": "0",
"nozzle_height": "4",
"nozzle_hrc": "0",
"pellet_modded_printer": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printer_technology": "FFF",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"silent_mode": "0",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"long_retractions_when_cut": "0",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_distances_when_cut": "18",
"travel_slope": "3",
"wipe": "1",
"z_hop_types": "Slope Lift"
}

112
resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json Normal file
View File

@@ -0,0 +1,112 @@
{
"type": "machine",
"from": "system",
"instantiation": "true",
"inherits": "fdm_creality_common",
"printer_model": "Creality K2 SE",
"auxiliary_fan": "0",
"bbl_use_printhost": "0",
"bed_exclude_area": "0x0",
"bed_mesh_max": "99999,99999",
"bed_mesh_min": "-99999,-99999",
"bed_mesh_probe_distance": "50,50",
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
"best_object_pos": "0.5,0.5",
"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X42 Y180 F30000\nG1 Z{z_after_toolchange} F600",
"cooling_tube_length": "0",
"cooling_tube_retraction": "0",
"creality_flush_time": "135",
"default_print_profile": "0.20mm Standard @Creality K2 SE 0.4 nozzle",
"disable_m73": "0",
"emit_machine_limits_to_gcode": "1",
"enable_filament_ramming": "0",
"extra_loading_move": "0",
"extruder_clearance_height_to_lid": "101",
"extruder_clearance_height_to_rod": "45",
"extruder_clearance_radius": "65",
"fan_kickstart": "0",
"fan_speedup_overhangs": "1",
"fan_speedup_time": "0",
"gcode_flavor": "klipper",
"high_current_on_filament_swap": "0",
"host_type": "octoprint",
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
"machine_LED_light_exist": "1",
"machine_end_gcode": "END_PRINT",
"machine_load_filament_time": "135",
"machine_max_acceleration_e": "5000",
"machine_max_acceleration_extruding": "20000",
"machine_max_acceleration_retracting": "5000",
"machine_max_acceleration_travel": "20000",
"machine_max_acceleration_x": "20000",
"machine_max_acceleration_y": "20000",
"machine_max_acceleration_z": "500",
"machine_max_jerk_e": "10",
"machine_max_jerk_x": "20",
"machine_max_jerk_y": "20",
"machine_max_jerk_z": "5",
"machine_max_speed_e": "100",
"machine_max_speed_x": "800",
"machine_max_speed_y": "800",
"machine_max_speed_z": "30",
"machine_min_extruding_rate": "0,0",
"machine_min_travel_rate": "0,0",
"machine_pause_gcode": "PAUSE",
"machine_platform_motion_enable": "1",
"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
"machine_unload_filament_time": "0",
"manual_filament_change": "0",
"nozzle_hrc": "0",
"nozzle_type": "hardened_steel",
"nozzle_volume": "178",
"parking_pos_retraction": "0",
"preferred_orientation": "0",
"prime_tower_position_type": "Middle Upper",
"printable_area": "0x0,220x0,220x215,0x215",
"printable_height": "245",
"printer_technology": "FFF",
"printer_variant": "0.4",
"printhost_authorization_type": "key",
"printhost_ssl_ignore_revoke": "0",
"purge_in_prime_tower": "1",
"scan_first_layer": "0",
"silent_mode": "0",
"single_extruder_multi_material": "1",
"support_air_filtration": "0",
"support_chamber_temp_control": "0",
"support_multi_bed_types": "1",
"thumbnails": "96x96,300x300",
"thumbnails_format": "PNG",
"time_cost": "0",
"use_firmware_retraction": "0",
"use_relative_e_distances": "1",
"z_offset": "0",
"default_filament_profile": [
"Creality Generic PLA @K2-all"
],
"deretraction_speed": "30",
"extruder_colour": "#FCE94F",
"extruder_offset": "0x0",
"max_layer_height": "0.3",
"min_layer_height": "0.08",
"nozzle_diameter": [
"0.4"
],
"retract_before_wipe": "0",
"retract_length_toolchange": "0",
"retract_lift_above": "0",
"retract_lift_below": "244",
"retract_lift_enforce": "All Surfaces",
"retract_restart_extra": "0",
"retract_restart_extra_toolchange": "0",
"retract_when_changing_layer": "1",
"retraction_length": "0.8",
"retraction_minimum_travel": "1",
"retraction_speed": "30",
"wipe": "1",
"wipe_distance": "2",
"z_hop": "0.4",
"z_hop_types": "Slope Lift",
"name": "Creality K2 SE 0.4 nozzle",
"setting_id": "21783"
}

13
resources/profiles/Creality/machine/Creality K2 SE.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality K2 SE",
"nozzle_diameter": "0.4",
"bed_model": "creality_k1_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_k1_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_K2_SE",
"default_materials": "Creality Generic ABS @K2-all;Creality Generic ASA @K2-all;Creality Generic PETG @K2-all;Creality Generic PLA @K2-all;Creality Generic PLA High Speed @K2-all;Creality Generic PLA Matte @K2-all;Creality Generic PLA Silk @K2-all"
}

125
resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json Normal file
View File

File diff suppressed because one or more lines are too long

125
resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json Normal file
View File

File diff suppressed because one or more lines are too long

125
resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json Normal file
View File

File diff suppressed because one or more lines are too long

125
resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json Normal file
View File

File diff suppressed because one or more lines are too long

13
resources/profiles/Creality/machine/Creality SPARKX i7.json Normal file
View File

@@ -0,0 +1,13 @@
{
"type": "machine_model",
"name": "Creality SPARKX i7",
"nozzle_diameter": "0.8;0.6;0.4;0.2",
"bed_model": "creality_SPARKX_buildplate_model.stl",
"default_bed_type": "Textured PEI Plate",
"bed_texture": "creality_hi_buildplate_texture.svg",
"family": "Creality",
"hotend_model": "",
"machine_tech": "FFF",
"model_id": "Creality_SPARKX_i7",
"default_materials": "Generic PETG @SPARKX i7-all;Generic PLA @SPARKX i7-all;CR-PLA Matte @SPARKX i7-all;Generic PLA Silk @SPARKX i7-all"
}

2
resources/profiles/Creality/machine/fdm_machine_common.json
View File

@@ -90,7 +90,7 @@
"1"
],
"retraction_length": [
"1"
"5"
],
"retract_length_toolchange": [
"1"