General fixes and improvements to CR-10 SE, Ender-3 V3 KE, Ender-3 S1 Plus, & small fix for Ender-3 V3 SE (#4793)

* Replace M109 S[material_print_temperature_layer_0] with M109 S[first_layer_temperature]

* Change line width to match nozzle

* Change line_width for Ender-3 S1 Plus

* Update creality_cr10se_buildplate_model.stl

* Change line width to match nozzle size (Ender3v3SE)

* Fix Ender-3 S1 Plus 0.8 bed size

* Enable Z-hop for Ender-3 S1 Plus

* Trying something

* Update creality_ender3s1plus_buildplate_model.stl

* Fix CR-10 SE print size

* Various Flying Bear fixes

* Try fixing error

* Revert "Try fixing error"

This reverts commit e42e016e4a.

* Add minor Ender-3 V3 KE improvements

* Maybe this will fix the error?

* Revert "Maybe this will fix the error?"

This reverts commit 5e7873251b.

* Revert "Various Flying Bear fixes"

This reverts commit babca572dc.

* Fix CR-10 SE G-Code

Recommended by @bkonosky

* Minor changes to Ender-3 V3 KE

* Probe when bed is heated (Ender-3 V3 KE)

* Minor changes to Ender-3 V3 KE

* Fix oozing (Ende-3 V3 KE)

* Change retraction settings

* Use different retraction settings

* Revert "Use different retraction settings"

This reverts commit 854decf848.

* try this

* Remove "role_based_wipe_speed": "0",

* Add changes from  CR-10 SE Config #4966

* Add "role_based_wipe_speed" : "0",

* Up retraction speed

* Missed this

* Resolve merge conflicts

* Resolve merge conflicts

* Change retraction & wipe speed

* Revert line removal

* Change wipe_speed to 200mm/s

* Forgot the 0.16mm

* Add BED_MESH_CALIBRATE PROBE_COUNT=6,6

* Improve for Matte PLA

* Compensate for fan speed

* Fix CANCEL_PRINT bug

* Move SET_VELOCITY_LIMIT ACCEL_TO_DECEL=2500 to start g-code

* Disable infill combination for 0.2 & 0.24

* Fix end G-Code

* Disable arc fitting

This fixes the merge conflict

* temp

* Revert "temp"

This reverts commit 4bbc028ade.

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3S1Plus 0.2.json

@@ -24,19 +24,19 @@
 	"draft_shield": "disabled",
 	"elefant_foot_compensation": "0.1",
 	"enable_arc_fitting": "0",
-	"outer_wall_line_width": "0.45",
+	"outer_wall_line_width": "0.25",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.25",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "grid",
 	"initial_layer_acceleration": "0",
 	"travel_acceleration": "0",
 	"inner_wall_acceleration": "0",
-	"initial_layer_line_width": "0.42",
+	"initial_layer_line_width": "0.22",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
-	"sparse_infill_line_width": "0.45",
+	"sparse_infill_line_width": "0.25",
 	"infill_wall_overlap": "25%",
 	"interface_shells": "0",
 	"ironing_flow": "15%",
@@ -50,7 +50,7 @@
 	"overhang_2_4_speed": "20",
 	"overhang_3_4_speed": "15",
 	"overhang_4_4_speed": "10",
-	"inner_wall_line_width": "0.45",
+	"inner_wall_line_width": "0.25",
 	"wall_loops": "2",
 	"print_settings_id": "",
 	"raft_layers": "0",
@@ -59,7 +59,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "2",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0",
+	"internal_solid_infill_line_width": "0.25",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -69,7 +69,7 @@
 	"support_on_build_plate_only": "0",
 	"support_top_z_distance": "0.15",
 	"support_filament": "0",
-	"support_line_width": "0.38",
+	"support_line_width": "0.18",
 	"support_interface_loop_pattern": "0",
 	"support_interface_filament": "0",
 	"support_interface_top_layers": "3",
@@ -85,7 +85,7 @@
 	"tree_support_wall_count": "0",
 	"detect_thin_wall": "1",
 	"top_surface_pattern": "monotonic",
-	"top_surface_line_width": "0.4",
+	"top_surface_line_width": "0.2",
 	"top_shell_layers": "7",
 	"top_shell_thickness": "0.8",
 	"initial_layer_speed": "35%",