mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-19 19:33:47 +00:00
Adding Z-Bolt profiles (#9240)
Added profiles for Z-Bolt S300, S300 Dual, S400, S400 Dual, S600, S600 Dual
This commit is contained in:
Vlad
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm Extra Fine @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP101",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP003",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08mm High Quality @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.08",
|
||||
"from": "system",
|
||||
"setting_id": "GP103",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "210",
|
||||
"inner_wall_speed": "120",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP005",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP105",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP205",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP006",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP106",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm High Quality @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.12",
|
||||
"from": "system",
|
||||
"setting_id": "GP206",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "230",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "180",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "180",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP008",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP108",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,24 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm High Quality @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP208",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"gap_infill_speed": "250",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_speed": "200",
|
||||
"top_surface_speed": "150",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP009",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP109",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.16",
|
||||
"from": "system",
|
||||
"setting_id": "GP209",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.16_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP010",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.16_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP110",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.16_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP210",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.20_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP011",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.20_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP124",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.20_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP224",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP211",
|
||||
"instantiation": "true",
|
||||
"description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Strength @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP012",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_density": "25%",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Strength @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP112",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_density": "25%",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Strength @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP212",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_density": "25%",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"wall_loops": "6",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP013",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP113",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Draft @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.24",
|
||||
"from": "system",
|
||||
"setting_id": "GP213",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP014",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Z-Bolt S300 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP015",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.8 nozzle",
|
||||
"Z-Bolt S300 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP114",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Z-Bolt S400 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.8 nozzle",
|
||||
"Z-Bolt S400 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP214",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Standard @Z-Bolt S600 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP215",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.8 nozzle",
|
||||
"Z-Bolt S600 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @Z-Bolt S300",
|
||||
"inherits": "fdm_process_zbolt_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP016",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.4 nozzle",
|
||||
"Z-Bolt S300 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @Z-Bolt S400",
|
||||
"inherits": "fdm_process_zbolt_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP116",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.4 nozzle",
|
||||
"Z-Bolt S400 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Extra Draft @Z-Bolt S600",
|
||||
"inherits": "fdm_process_zbolt_0.28",
|
||||
"from": "system",
|
||||
"setting_id": "GP216",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.4 nozzle",
|
||||
"Z-Bolt S600 Dual 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP017",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP117",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP217",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Strength @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP018",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "4",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Strength @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP118",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "4",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Strength @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP218",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "4",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard @Z-Bolt S300 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP019",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.8 nozzle",
|
||||
"Z-Bolt S300 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard @Z-Bolt S400 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP119",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.8 nozzle",
|
||||
"Z-Bolt S400 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Standard @Z-Bolt S600 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP219",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.8 nozzle",
|
||||
"Z-Bolt S600 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP020",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP120",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Standard @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP220",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Z-Bolt S300 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP021",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.8 nozzle",
|
||||
"Z-Bolt S300 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Z-Bolt S400 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP121",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.8 nozzle",
|
||||
"Z-Bolt S400 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Z-Bolt S600 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP221",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.8 nozzle",
|
||||
"Z-Bolt S600 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @Z-Bolt S300 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP022",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.6 nozzle",
|
||||
"Z-Bolt S300 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @Z-Bolt S400 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.6 nozzle",
|
||||
"Z-Bolt S400 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Standard @Z-Bolt S600 0.6 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP222",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.6 nozzle",
|
||||
"Z-Bolt S600 Dual 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Standard @Z-Bolt S300 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP023",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S300 0.8 nozzle",
|
||||
"Z-Bolt S300 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Standard @Z-Bolt S400 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP123",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S400 0.8 nozzle",
|
||||
"Z-Bolt S400 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Standard @Z-Bolt S600 0.8 nozzle",
|
||||
"inherits": "fdm_process_zbolt_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP223",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Z-Bolt S600 0.8 nozzle",
|
||||
"Z-Bolt S600 Dual 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
75
resources/profiles/Z-Bolt/process/fdm_process_common.json
Normal file
75
resources/profiles/Z-Bolt/process/fdm_process_common.json
Normal file
@@ -0,0 +1,75 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"adaptive_layer_height": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"bridge_flow": "0.95",
|
||||
"bridge_speed": "25",
|
||||
"brim_width": "5",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "10000",
|
||||
"bridge_no_support": "0",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"ironing_inset": "0.21",
|
||||
"outer_wall_speed": "120",
|
||||
"line_width": "0.45",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "20",
|
||||
"gap_infill_speed": "30",
|
||||
"infill_combination": "0",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"infill_wall_overlap": "15%",
|
||||
"sparse_infill_speed": "50",
|
||||
"interface_shells": "0",
|
||||
"detect_overhang_wall": "0",
|
||||
"reduce_infill_retraction": "0",
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"wall_loops": "2",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "40",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "nearest",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "2",
|
||||
"minimum_sparse_infill_area": "0",
|
||||
"internal_solid_infill_line_width": "0.45",
|
||||
"internal_solid_infill_speed": "40",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"support_filament": "0",
|
||||
"support_line_width": "0.42",
|
||||
"support_interface_filament": "0",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.15",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2",
|
||||
"support_speed": "40",
|
||||
"support_threshold_angle": "40",
|
||||
"support_object_xy_distance": "0.5",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_speed": "30",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"compatible_printers": [],
|
||||
"smooth_coefficient": "80",
|
||||
"overhang_totally_speed": "19",
|
||||
"scarf_angle_threshold": "155"
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.08",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.08",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "7",
|
||||
"top_shell_layers": "9",
|
||||
"bridge_flow": "1",
|
||||
"ironing_flow": "8%",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "350",
|
||||
"sparse_infill_speed": "450",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"gap_infill_speed": "350",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "15",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08"
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.12",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_layers": "5",
|
||||
"top_shell_thickness": "0.6",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "350",
|
||||
"sparse_infill_speed": "430",
|
||||
"internal_solid_infill_speed": "350",
|
||||
"gap_infill_speed": "350",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "20",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12"
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.16",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.16",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"bottom_shell_layers": "4",
|
||||
"top_shell_layers": "6",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "300",
|
||||
"sparse_infill_speed": "330",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"gap_infill_speed": "300",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "10",
|
||||
"support_threshold_angle": "25",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_bottom_z_distance": "0.16"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.16_nozzle_0.6",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.16",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"support_top_z_distance": "0.16",
|
||||
"support_bottom_z_distance": "0.16"
|
||||
}
|
||||
@@ -0,0 +1,18 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.20",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "300",
|
||||
"sparse_infill_speed": "270",
|
||||
"internal_solid_infill_speed": "250",
|
||||
"gap_infill_speed": "250",
|
||||
"top_shell_layers": "5"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.20_nozzle_0.6",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.20",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.24",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_surface_line_width": "0.45",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "230",
|
||||
"sparse_infill_speed": "230",
|
||||
"internal_solid_infill_speed": "230",
|
||||
"gap_infill_speed": "230",
|
||||
"support_threshold_angle": "35",
|
||||
"top_shell_layers": "4"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.24_nozzle_0.6",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.24_nozzle_0.8",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"ironing_inset": "0.41",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -0,0 +1,21 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.28",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.28",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"top_surface_line_width": "0.45",
|
||||
"top_shell_thickness": "1.0",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"outer_wall_speed": "200",
|
||||
"inner_wall_speed": "200",
|
||||
"sparse_infill_speed": "200",
|
||||
"internal_solid_infill_speed": "200",
|
||||
"gap_infill_speed": "200",
|
||||
"support_threshold_angle": "40",
|
||||
"top_shell_layers": "4"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.30_nozzle_0.6",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.32_nozzle_0.8",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.32",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"ironing_inset": "0.41",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.36_nozzle_0.6",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.36",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.40_nozzle_0.8",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.4",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"ironing_inset": "0.41",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.42_nozzle_0.6",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"ironing_inset": "0.31",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_0.48_nozzle_0.8",
|
||||
"inherits": "fdm_process_zbolt_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.48",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"ironing_inset": "0.41",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -0,0 +1,79 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_zbolt_common",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_speed": "50",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers_condition": "",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_acceleration": "5000",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"line_width": "0.42",
|
||||
"internal_bridge_support_thickness": "0.8",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_speed": "30",
|
||||
"gap_infill_speed": "50",
|
||||
"sparse_infill_speed": "250",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"layer_height": "0.2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"only_one_wall_top": "1",
|
||||
"inner_wall_speed": "150",
|
||||
"seam_position": "aligned",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"initial_layer_infill_speed": "60",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_style": "default",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_expansion": "0",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "150",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_diameter": "2",
|
||||
"tree_support_branch_angle": "45",
|
||||
"tree_support_wall_count": "0",
|
||||
"max_bridge_length": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_acceleration": "2000",
|
||||
"top_surface_speed": "200",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "0.8",
|
||||
"travel_speed": "400",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "20",
|
||||
"wall_generator": "classic",
|
||||
"exclude_object": "1",
|
||||
"ooze_prevention": "0",
|
||||
"standby_temperature_delta": "-40",
|
||||
"preheat_time": "30",
|
||||
"preheat_steps": "1",
|
||||
"compatible_printers": []
|
||||
}
|
||||
Reference in New Issue
Block a user