Merge branch 'main' into belt/baseChanges

resources/data/hints.ini

@@ -146,16 +146,16 @@ text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned
 text = Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts.
 
 [hint:Speed up your print with Adaptive Layer Height]
-text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
+text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!
 
 [hint:Support painting]
 text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it.
 
 [hint:Different types of supports]
-text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
+text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!
 
 [hint:Printing Silk Filament]
-text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
+text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results.
 
 [hint:Brim for better adhesion]
 text = Brim for better adhesion\nDid you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?
@@ -167,13 +167,13 @@ text = Set parameters for multiple objects\nDid you know that you can set slicin
 text = Stack objects\nDid you know that you can stack objects as a whole one?
 
 [hint:Flush into support/objects/infill]
-text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?
+text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?
 
 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
 
 [hint:When do you need to print with the printer door opened]
-text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki.
+text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki.
 
 [hint:Avoid warping]
 text = Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?

resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "10"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-Nylon @Ender-5 Max-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PETG @Hi-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_retraction_length": [
         "0.8"

resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_retraction_length": [
         "0.8"

resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "12"
     ],
     "filament_type": [
         "PETG"

resources/profiles/Creality/filament/CR-PLA @Hi-all.json

@@ -39,7 +39,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1.8"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Generic BVOH @Hi-all.json

@@ -45,7 +45,7 @@
         "1"
     ],
     "filament_max_volumetric_speed": [
-        "3"
+        "6"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Generic PVA @Hi-all.json

@@ -48,7 +48,7 @@
         "1"
     ],
     "filament_max_volumetric_speed": [
-        "3"
+        "6"
     ],
     "filament_retract_before_wipe": [
         "100"

resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json

@@ -57,7 +57,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "10"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "23"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "18"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "18"
     ],
     "filament_retract_before_wipe": [
         "100"

resources/profiles/Creality/filament/Hyper PLA @Hi-all.json

@@ -39,7 +39,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "21"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "21"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "21"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
 	"name": "Flashforge",
 	"url": "",
-	"version": "02.04.00.01",
+	"version": "02.04.00.02",
 	"force_update": "0",
 	"description": "Flashforge configurations",
 	"machine_model_list": [

resources/profiles/Flashforge/machine/Flashforge Guider4 0.4 HF nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 HF nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 0.6 nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": "",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 0.8 HF nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": "",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.4 HF nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 HF nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.6 nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": "",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/Flashforge Guider4 Pro 0.8 HF nozzle.json

@@ -49,6 +49,7 @@
 	"head_wrap_detect_zone": [],
 	"high_current_on_filament_swap": "0",
 	"host_type": "octoprint",
+	"use_3mf": "1",
 	"layer_change_gcode": "",
 	"long_retractions_when_cut": [
 		"0"

resources/profiles/Flashforge/machine/fdm_adventurer5m_common.json

@@ -118,5 +118,6 @@
 	],
 	"extruder_clearance_height_to_lid": [
 		"150"
-	]
+	],
+	"use_3mf": "1"
 }

resources/profiles/Qidi.json

@@ -1,6 +1,6 @@
 {
 	"name": "Qidi",
-	"version": "02.04.00.02",
+	"version": "02.04.00.03",
 	"force_update": "0",
 	"description": "Qidi configurations",
 	"machine_model_list": [

resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json

@@ -48,7 +48,7 @@
 		"20"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nG1 X108 Y1 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4  * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600\nG1 X108 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600",
+	"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nG1 X108 Y1 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4  * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600\nG1 X108 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nG0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X154 Z-0.1\nG1 X158\nG1 Z1 F600",
 	"machine_unload_filament_time": "35",
 	"nozzle_diameter": [
 		"0.4"
@@ -71,5 +71,6 @@
 	"thumbnail_size": [
 		"150x150"
 	],
-	"printer_agent": "qidi"
+	"printer_agent": "qidi",
+	"use_3mf": "1"
 }

resources/profiles/Qidi/machine/Qidi Q2C 0.4 nozzle.json

@@ -48,7 +48,7 @@
 		"20"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
+	"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG4 P3000\nT[initial_tool]\nG1 X108.000 Y1 F30000\nG0 Z[initial_layer_print_height] F600\n;G1 E3 F1800\nG90\nM83\nG0 X128 E8  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 X108.000 Y2.5 F30000\nG0 Z[initial_layer_print_height] F600\nM83\nG0 X128 E10  F{outer_wall_volumetric_speed/(24/20)    * 60}\nG0 X133 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X138 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X143 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG0 X148 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)     * 60}\nG0 X153 E.3742  F{outer_wall_volumetric_speed/(0.3*0.5)/4     * 60}\nG91\nG1 X1 Z-0.300\nG1 X4\nG1 Z1 F1200\nG90\nM400\nG1 Z1 F600",
 	"machine_unload_filament_time": "35",
 	"nozzle_diameter": [
 		"0.4"
@@ -71,5 +71,6 @@
 	"thumbnail_size": [
 		"150x150"
 	],
-	"printer_agent": "qidi"
+	"printer_agent": "qidi",
+	"use_3mf": "1"
 }

resources/profiles/Qidi/machine/Qidi X-Max 4 0.4 nozzle.json

@@ -78,5 +78,6 @@
 	"thumbnail_size": [
 		"150x150"
 	],
-	"fan_direction": "left"
+	"fan_direction": "left",
+	"use_3mf": "1"
 }

resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json

@@ -94,7 +94,7 @@
 	"layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
 	"machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y290 F12000\nG0 X90 Y290 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0",
 	"time_lapse_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nG1 Y304 F20000\nG1 X95 F20000\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 Y324 F5000\nG1 E[retraction_length] F300\nG1 X65 F5000\nG1 Y290 F20000\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}",
-	"machine_start_gcode": "INIT_MAPPING_VALUE\nPRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
+	"machine_start_gcode": "PRINT_START BED=[bed_temperature_initial_layer_single] HOTEND=[nozzle_temperature_initial_layer] CHAMBER=[chamber_temperature] EXTRUDER=[initial_no_support_extruder]\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nM83\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nT[initial_tool]\nG0 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0] - 12, first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1] - 3, first_layer_print_min[1] + 80) - 85), 0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 3} Z0\nG1 X{max((min(print_bed_max[0] - 12, first_layer_print_min[0] + 80) - 85), 0) + 6}\nG1 Z1 F600\nSET_PRINT_STATS_INFO CURRENT_LAYER=1",
 	"thumbnails_format": "PNG",
 	"default_filament_profile": [
 		"Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle"

resources/profiles/Qidi/process/fdm_process_n_common.json

@@ -228,5 +228,7 @@
 	"prime_tower_lift_height": "-1",
 	"prime_tower_max_speed": "90",
 	"prime_tower_flat_ironing": "0",
-	"compatible_printers": []
+	"compatible_printers": [],
+	"gcode_label_objects": "0",
+	"exclude_object": "1"
 }