mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-27 04:42:33 +00:00
2.2.0 pre3 (#81)
* Hide the system filament * Fix: crash when using m_ProfileJson * Bump profile version to 02.02.41.02 * Update: Flutter 1222
This commit is contained in:
xiaoyeliu
@@ -1,19 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP115",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,15 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.06 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.06_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP024",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -12,12 +12,18 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"outer_wall_speed": "100",
|
||||
"precise_outer_wall": "0",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,19 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP122",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -21,12 +21,17 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "18",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "0",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,15 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.08 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.08_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP025",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,19 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10 High Quality @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP111",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.",
|
||||
"default_acceleration": "4000",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"outer_wall_acceleration": "2000",
|
||||
"outer_wall_speed": "60",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,15 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.10 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.10_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP007",
|
||||
"instantiation": "true",
|
||||
"description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -16,8 +16,14 @@
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "27",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "0",
|
||||
"support_threshold_angle": "25",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -20,11 +20,19 @@
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "27",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_threshold_angle": "25",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,15 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.12_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP026",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -1,15 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.14 Standard @Snapmaker U1 (0.2 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.14_nozzle_0.2",
|
||||
"from": "system",
|
||||
"setting_id": "GP027",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.2 nozzle)"
|
||||
]
|
||||
}
|
||||
@@ -21,12 +21,18 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "36",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "0",
|
||||
"support_threshold_angle": "30",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -12,12 +12,17 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "36",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "0",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.18_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP028",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"layer_height": "0.25",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "55",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -12,8 +12,8 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "45",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
@@ -21,6 +21,18 @@
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"prime_tower_brim_width": "5",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"min_width_top_surface": "300%",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"min_width_top_surface": "200%",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"precise_z_height": "0",
|
||||
"bridge_density": "80%",
|
||||
"bridge_flow": "0.8",
|
||||
"enable_arc_fitting": "0",
|
||||
"internal_solid_infill_pattern": "rectilinear",
|
||||
"precise_outer_wall": "0",
|
||||
"seam_gap": "15%",
|
||||
"small_area_infill_flow_compensation_model": [],
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_speed": "50",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -15,12 +15,17 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "45",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "0",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -12,12 +12,17 @@
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "54",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"precise_outer_wall": "0",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.24_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "55",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24 Standard @Snapmaker U1 (0.8 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.24_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP029",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"min_width_top_surface": "90",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "60",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -11,11 +11,18 @@
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4 nozzle)"
|
||||
],
|
||||
"prime_tower_width": "40",
|
||||
"prime_volume": "35",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "63",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"wipe_tower_filament": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "120%"
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"enable_arc_fitting": "0",
|
||||
"ooze_prevention": "1",
|
||||
"precise_outer_wall": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"support_type": "tree(auto)",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP010",
|
||||
"instantiation": "true",
|
||||
"description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "50",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30 Strength @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.30_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP036",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"sparse_infill_density": "25%",
|
||||
"wall_loops": "4",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "55",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32 Standard @Snapmaker U1 (0.8 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.32_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP033",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "60",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.36_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP030",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "50",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40 Standard @Snapmaker U1 (0.8 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.40_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP009",
|
||||
"instantiation": "true",
|
||||
"description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "60",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.42_nozzle_0.6",
|
||||
"from": "system",
|
||||
"setting_id": "GP031",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"precise_z_height": "1",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "50",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "120%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48 Standard @Snapmaker U1 (0.8 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.48_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP034",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"internal_bridge_speed": "100%",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "60",
|
||||
"seam_gap": "15%",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56 Standard @Snapmaker U1 (0.8 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.56_nozzle_0.8",
|
||||
"from": "system",
|
||||
"setting_id": "GP035",
|
||||
"instantiation": "true",
|
||||
"description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.8 nozzle)"
|
||||
],
|
||||
"filter_out_gap_fill": "1",
|
||||
"gap_fill_target": "topbottom",
|
||||
"layer_height": "0.32",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "60",
|
||||
"wipe_tower_extra_rib_length": "8",
|
||||
"wipe_tower_extra_spacing": "150%",
|
||||
"wipe_tower_wall_type": "rib"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.06_nozzle_0.2",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.06",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.06",
|
||||
"support_bottom_z_distance": "0.06"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.08_nozzle_0.2",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.08",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.10_nozzle_0.2",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.1",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_bottom_z_distance": "0.1"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.12_nozzle_0.2",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.12",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.12",
|
||||
"support_bottom_z_distance": "0.12"
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.14_nozzle_0.2",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.14",
|
||||
"initial_layer_print_height": "0.1",
|
||||
"wall_loops": "4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "7",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.22",
|
||||
"outer_wall_line_width": "0.22",
|
||||
"initial_layer_line_width": "0.25",
|
||||
"sparse_infill_line_width": "0.22",
|
||||
"inner_wall_line_width": "0.22",
|
||||
"internal_solid_infill_line_width": "0.22",
|
||||
"support_line_width": "0.22",
|
||||
"top_surface_line_width": "0.22",
|
||||
"initial_layer_speed": "40",
|
||||
"initial_layer_infill_speed": "70",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"support_top_z_distance": "0.14",
|
||||
"support_bottom_z_distance": "0.14"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.18_nozzle_0.6",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15",
|
||||
"support_top_z_distance": "0.18",
|
||||
"support_bottom_z_distance": "0.18"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.24_nozzle_0.6",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.24_nozzle_0.8",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.24",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.30_nozzle_0.6",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.32_nozzle_0.8",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.32",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.36_nozzle_0.6",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.36",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.40_nozzle_0.8",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.4",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.42_nozzle_0.6",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.42",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"initial_layer_line_width": "0.62",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "15"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.48_nozzle_0.8",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.48",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.56_nozzle_0.8",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"layer_height": "0.56",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"bridge_flow": "1",
|
||||
"line_width": "0.82",
|
||||
"outer_wall_line_width": "0.82",
|
||||
"initial_layer_line_width": "0.82",
|
||||
"sparse_infill_line_width": "0.82",
|
||||
"inner_wall_line_width": "0.82",
|
||||
"internal_solid_infill_line_width": "0.82",
|
||||
"support_line_width": "0.82",
|
||||
"top_surface_line_width": "0.82",
|
||||
"top_surface_pattern": "monotonic",
|
||||
"initial_layer_speed": "35",
|
||||
"initial_layer_infill_speed": "55",
|
||||
"sparse_infill_speed": "100",
|
||||
"top_surface_speed": "150",
|
||||
"bridge_speed": "30",
|
||||
"overhang_3_4_speed": "25",
|
||||
"overhang_4_4_speed": "5"
|
||||
}
|
||||
Reference in New Issue
Block a user