diff --git a/resources/profiles/Cubicon.json b/resources/profiles/Cubicon.json index 7f7f0ab195..c1e7531397 100644 --- a/resources/profiles/Cubicon.json +++ b/resources/profiles/Cubicon.json @@ -7,10 +7,14 @@ { "name": "Cubicon xCeler-I", "sub_path": "machine/Cubicon xCeler-I.json" + }, + { + "name": "Cubicon xCeler-Plus", + "sub_path": "machine/Cubicon xCeler-Plus.json" } ], "process_list": [ - { + { "name": "fdm_process_common", "sub_path": "process/fdm_process_common.json" }, @@ -19,88 +23,171 @@ "sub_path": "process/fdm_process_common_klipper.json" }, { - "name": "cubicon common @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "process/cubicon common @Cubicon xCeler-I 0.4 nozzle.json" + "name": "process template @base", + "sub_path": "process/process template @base.json" }, { - "name": "process template @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "process/process template @Cubicon xCeler-I 0.4 nozzle.json" + "name": "cubicon common @base", + "sub_path": "process/cubicon common @base.json" }, { "name": "cubicon default @Cubicon xCeler-I 0.4 nozzle", "sub_path": "process/cubicon default @Cubicon xCeler-I 0.4 nozzle.json" - } + }, + { + "name": "cubicon default @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "process/cubicon default @Cubicon xCeler-Plus 0.4 nozzle.json" + } ], "filament_list": [ - { + { "name": "fdm_filament_common", "sub_path": "filament/fdm_filament_common.json" }, - { - "name": "fdm_filament_abs", - "sub_path": "filament/fdm_filament_abs.json" - }, - { - "name": "fdm_filament_pa", - "sub_path": "filament/fdm_filament_pa.json" - }, - { - "name": "fdm_filament_pc", - "sub_path": "filament/fdm_filament_pc.json" - }, - { - "name": "fdm_filament_pet", - "sub_path": "filament/fdm_filament_pet.json" - }, - { + { "name": "fdm_filament_pla", "sub_path": "filament/fdm_filament_pla.json" }, - { - "name": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json" + { + "name": "fdm_filament_abs", + "sub_path": "filament/fdm_filament_abs.json" }, - { - "name": "Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json" + { + "name": "fdm_filament_pc", + "sub_path": "filament/fdm_filament_pc.json" }, - { - "name": "Cubicon PC @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json" + { + "name": "fdm_filament_pet", + "sub_path": "filament/fdm_filament_pet.json" }, + { + "name": "fdm_filament_pa", + "sub_path": "filament/fdm_filament_pa.json" + }, { - "name": "Cubicon PETG @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json" + "name": "Cubicon PLA @base", + "sub_path": "filament/Cubicon PLA @base.json" }, { "name": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle", "sub_path": "filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + { + "name": "Cubicon PLA+ @base", + "sub_path": "filament/Cubicon PLA+ @base.json" + }, + { + "name": "Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + + { + "name": "Cubicon PLAi21 @base", + "sub_path": "filament/Cubicon PLAi21 @base.json" + }, + { + "name": "Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + { + "name": "Cubicon ABS @base", + "sub_path": "filament/Cubicon ABS @base.json" + }, + { + "name": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + { + "name": "Cubicon ABSk @base", + "sub_path": "filament/Cubicon ABSk @base.json" + }, + { + "name": "Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + { + "name": "Cubicon ABS-A100 @base", + "sub_path": "filament/Cubicon ABS-A100 @base.json" }, { "name": "Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle", "sub_path": "filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + { + "name": "Cubicon PETG @base", + "sub_path": "filament/Cubicon PETG @base.json" }, { - "name": "Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json" + "name": "Cubicon PETG @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + + { + "name": "Cubicon PC @base", + "sub_path": "filament/Cubicon PC @base.json" }, { - "name": "Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json" + "name": "Cubicon PC @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle.json" + }, + + { + "name": "Cubicon PA-CF @base", + "sub_path": "filament/Cubicon PA-CF @base.json" }, { - "name": "Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle", - "sub_path": "filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json" + "name": "Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle", + "sub_path": "filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json" + }, + { + "name": "Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "filament/Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle.json" } ], "machine_list": [ - { + { "name": "fdm_machine_common", "sub_path": "machine/fdm_machine_common.json" }, { "name": "Cubicon xCeler-I 0.4 nozzle", "sub_path": "machine/Cubicon xCeler-I 0.4 nozzle.json" - } + }, + { + "name": "Cubicon xCeler-Plus 0.4 nozzle", + "sub_path": "machine/Cubicon xCeler-Plus 0.4 nozzle.json" + } ] } \ No newline at end of file diff --git a/resources/profiles/Cubicon/Cubicon xCeler-I_cover.png b/resources/profiles/Cubicon/Cubicon xCeler-I_cover.png index d563958139..869c09f040 100644 Binary files a/resources/profiles/Cubicon/Cubicon xCeler-I_cover.png and b/resources/profiles/Cubicon/Cubicon xCeler-I_cover.png differ diff --git a/resources/profiles/Cubicon/Cubicon xCeler-Plus_cover.png b/resources/profiles/Cubicon/Cubicon xCeler-Plus_cover.png new file mode 100644 index 0000000000..039818b219 Binary files /dev/null and b/resources/profiles/Cubicon/Cubicon xCeler-Plus_cover.png differ diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json index 504774ebde..e94c140f14 100644 --- a/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json @@ -1,71 +1,13 @@ { "type": "filament", - "name": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_filament_abs", - "filament_id": "P510cfb0", - "instantiation": "true", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "ABS" - ], - "filament_vendor": [ - "Cubicon" - ], - "hot_plate_temp": [ - "115" - ], - "hot_plate_temp_initial_layer": [ - "115" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "30" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "25" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "70" - ], - "slow_down_min_speed": [ - "30" - ], - "slow_down_layer_time": [ - "3" - ], - "nozzle_temperature": [ - "245" - ], - "temperature_vitrification": [ - "78" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "additional_cooling_fan_speed": [ - "0" - ] -} \ No newline at end of file + + "inherits": "Cubicon ABS @base", + "name": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", + "filament_settings_id": ["Cubicon ABS @Cubicon xCeler-I 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..9cddacd80f --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "inherits": "Cubicon ABS @base", + "name": "Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle", + "filament_settings_id": ["Cubicon ABS @Cubicon xCeler-Plus 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS @base.json b/resources/profiles/Cubicon/filament/Cubicon ABS @base.json new file mode 100644 index 0000000000..6e5cddd5cc --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon ABS @base.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": "", + + "filament_id": "P510cfb0", + + "name": "Cubicon ABS @base", + "filament_settings_id": ["Cubicon ABS @base"], + "filament_vendor": ["Cubicon"], + "inherits": "fdm_filament_abs", + "filament_type": ["ABS"], + "is_custom_defined": "0", + + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "70" + ], + "slow_down_min_speed": [ + "30" + ], + "slow_down_layer_time": [ + "3" + ], + "nozzle_temperature": [ + "245" + ], + "temperature_vitrification": [ + "78" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json index 036d5c0d3e..2192a5554d 100644 --- a/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json @@ -1,71 +1,13 @@ { "type": "filament", - "name": "Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", - "filament_id": "P510cfb1", - "instantiation": "true", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "ABS" - ], - "filament_vendor": [ - "Cubicon" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "30" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "25" - ], - "nozzle_temperature_initial_layer": [ - "225" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "70" - ], - "slow_down_min_speed": [ - "30" - ], - "slow_down_layer_time": [ - "3" - ], - "nozzle_temperature": [ - "230" - ], - "temperature_vitrification": [ - "78" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "additional_cooling_fan_speed": [ - "0" - ] -} \ No newline at end of file + + "inherits": "Cubicon ABS-A100 @base", + "name": "Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle", + "filament_settings_id": ["Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..7d36014099 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "inherits": "Cubicon ABS-A100 @base", + "name": "Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle", + "filament_settings_id": ["Cubicon ABS-A100 @Cubicon xCeler-Plus 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @base.json b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @base.json new file mode 100644 index 0000000000..9d797c70ee --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @base.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + "default_filament_colour": "", + "filament_id": "P510cfb1", + "filament_settings_id": [ + "Cubicon ABS-A100 @base" + ], + "filament_type": [ + "ABS" + ], + "filament_vendor": [ + "Cubicon" + ], + "inherits": "Cubicon ABS @base", + "is_custom_defined": "0", + "name": "Cubicon ABS-A100 @base", + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "70" + ], + "slow_down_min_speed": [ + "30" + ], + "slow_down_layer_time": [ + "3" + ], + "nozzle_temperature": [ + "230" + ], + "temperature_vitrification": [ + "78" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json index 55a64368b6..0526a82ae1 100644 --- a/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json @@ -1,71 +1,13 @@ { "type": "filament", - "name": "Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", - "filament_id": "P510cfb2", - "instantiation": "true", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "ABS" - ], - "filament_vendor": [ - "Cubicon" - ], - "hot_plate_temp": [ - "115" - ], - "hot_plate_temp_initial_layer": [ - "115" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "30" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "25" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "70" - ], - "slow_down_min_speed": [ - "30" - ], - "slow_down_layer_time": [ - "3" - ], - "nozzle_temperature": [ - "240" - ], - "temperature_vitrification": [ - "85" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "additional_cooling_fan_speed": [ - "0" - ] -} \ No newline at end of file + + "inherits": "Cubicon ABSk @base", + "name": "Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle", + "filament_settings_id": ["Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..ab4f5fdac6 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "inherits": "Cubicon ABSk @base", + "name": "Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle", + "filament_settings_id": ["Cubicon ABSk @Cubicon xCeler-Plus 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon ABSk @base.json b/resources/profiles/Cubicon/filament/Cubicon ABSk @base.json new file mode 100644 index 0000000000..90d884388b --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon ABSk @base.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + "default_filament_colour": "", + "filament_id": "P510cfb2", + "filament_settings_id": [ + "Cubicon ABSk @base" + ], + "filament_type": [ + "ABS" + ], + "filament_vendor": [ + "Cubicon" + ], + "inherits": "Cubicon ABS @base", + "is_custom_defined": "0", + "name": "Cubicon ABSk @base", + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "115" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "70" + ], + "slow_down_min_speed": [ + "30" + ], + "slow_down_layer_time": [ + "3" + ], + "nozzle_temperature": [ + "240" + ], + "temperature_vitrification": [ + "85" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json index 70b81652c1..89b9fedd35 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json @@ -1,71 +1,13 @@ { "type": "filament", - "name": "Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_filament_pa", - "filament_id": "P510cfd0", - "instantiation": "true", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "PA" - ], - "filament_vendor": [ - "Cubicon" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "5" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "11" - ], - "nozzle_temperature_initial_layer": [ - "265" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "50" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "2" - ], - "nozzle_temperature": [ - "270" - ], - "temperature_vitrification": [ - "108" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "additional_cooling_fan_speed": [ - "0" - ] -} \ No newline at end of file + + "inherits": "Cubicon PA-CF @base", + "name": "Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle", + "filament_settings_id": ["Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..4ab18c24c6 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "inherits": "Cubicon PA-CF @base", + "name": "Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle", + "filament_settings_id": ["Cubicon PA-CF @Cubicon xCeler-Plus 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PA-CF @base.json b/resources/profiles/Cubicon/filament/Cubicon PA-CF @base.json new file mode 100644 index 0000000000..d8c89c7d11 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PA-CF @base.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": "", + + "filament_id": "P510cfd0", + + "filament_settings_id": [ + "Cubicon PA-CF @base" + ], + + "filament_type": [ + "PA" + ], + + "filament_vendor": [ + "Cubicon" + ], + + "inherits": "fdm_filament_pa", + + "is_custom_defined": "0", + "name": "Cubicon PA-CF @base", + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "5" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "50" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "2" + ], + "nozzle_temperature": [ + "270" + ], + "temperature_vitrification": [ + "108" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json index 849d03a2fd..2c7620fd08 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json @@ -1,20 +1,13 @@ { "type": "filament", - "name": "Cubicon PC @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_filament_pc", - "filament_id": "P510cfd0", - "instantiation": "true", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon PC @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "PC" - ], - "filament_vendor": [ - "Cubicon" - ] -} \ No newline at end of file + + "inherits": "Cubicon PC @base", + "name": "Cubicon PC @Cubicon xCeler-I 0.4 nozzle", + "filament_settings_id": ["Cubicon PC @Cubicon xCeler-I 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..0b7e15ded2 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "inherits": "Cubicon PC @base", + "name": "Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle", + "filament_settings_id": ["Cubicon PC @Cubicon xCeler-Plus 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PC @base.json b/resources/profiles/Cubicon/filament/Cubicon PC @base.json new file mode 100644 index 0000000000..dcde4c64de --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PC @base.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": "", + + "filament_id": "P510cfd0", + + "filament_settings_id": [ + "Cubicon PC @base" + ], + + "filament_type": [ + "PC" + ], + + "filament_vendor": [ + "Cubicon" + ], + + "inherits": "fdm_filament_pc", + + "is_custom_defined": "0", + "name": "Cubicon PC @base" + +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json index c0b1c577e9..a156c688e5 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json @@ -1,71 +1,13 @@ { "type": "filament", - "name": "Cubicon PETG @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_filament_pet", - "filament_id": "P510cfc0", - "instantiation": "true", + "instantiation": "true", + "version": "1.0.0.0", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon PETG @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Cubicon" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_cooling_layer_time": [ - "30" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "nozzle_temperature_initial_layer": [ - "235" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "80" - ], - "slow_down_min_speed": [ - "30" - ], - "slow_down_layer_time": [ - "8" - ], - "nozzle_temperature": [ - "240" - ], - "temperature_vitrification": [ - "70" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "additional_cooling_fan_speed": [ - "0" - ] -} \ No newline at end of file + + "inherits": "Cubicon PETG @base", + "name": "Cubicon PETG @Cubicon xCeler-I 0.4 nozzle", + "filament_settings_id": ["Cubicon PETG @Cubicon xCeler-I 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..d49607abaa --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "inherits": "Cubicon PETG @base", + "name": "Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle", + "filament_settings_id": ["Cubicon PETG @Cubicon xCeler-Plus 0.4 nozzle"] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PETG @base.json b/resources/profiles/Cubicon/filament/Cubicon PETG @base.json new file mode 100644 index 0000000000..b686ff907f --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PETG @base.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": "", + + "filament_id": "P510cfc0", + + "filament_settings_id": [ + "Cubicon PETG @base" + ], + + "filament_type": [ + "PETG" + ], + + "filament_vendor": [ + "Cubicon" + ], + + "inherits": "fdm_filament_pet", + + "is_custom_defined": "0", + "name": "Cubicon PETG @base", + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "30" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "80" + ], + "slow_down_min_speed": [ + "30" + ], + "slow_down_layer_time": [ + "8" + ], + "nozzle_temperature": [ + "240" + ], + "temperature_vitrification": [ + "70" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "additional_cooling_fan_speed": [ + "0" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json index 8436718948..667ebbfd1e 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json @@ -1,62 +1,12 @@ { "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", "name": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_filament_pla", - "filament_id": "P510cfa0", - "instantiation": "true", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "Cubicon" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "24.5" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "50" - ], - "temperature_vitrification": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "205" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "100" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "additional_cooling_fan_speed": [ - "80" - ] -} \ No newline at end of file + "inherits": "Cubicon PLA @base" +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..4951caf644 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", + "name": "Cubicon PLA @Cubicon xCeler-Plus 0.4 nozzle", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + "inherits": "Cubicon PLA @base" +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA @base.json b/resources/profiles/Cubicon/filament/Cubicon PLA @base.json new file mode 100644 index 0000000000..20875d851c --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PLA @base.json @@ -0,0 +1,68 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", + "name": "Cubicon PLA @base", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": "", + "filament_id": "P510cfa0", + "filament_settings_id": [ + "CBC_MTC_0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Cubicon" + ], + "inherits": "fdm_filament_pla", + "is_custom_defined": "0", + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "50" + ], + "temperature_vitrification": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "100" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "additional_cooling_fan_speed": [ + "80" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json index e8c6118e17..370fb6b520 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json @@ -1,26 +1,12 @@ { "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", "name": "Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle", - "filament_id": "P510cfa1", - "instantiation": "true", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "Cubicon" - ], - "temperature_vitrification": [ - "52" - ], - "nozzle_temperature_range_high": [ - "220" - ] -} \ No newline at end of file + "inherits": "Cubicon PLA+ @base" +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..1891392db0 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", + "name": "Cubicon PLA+ @Cubicon xCeler-Plus 0.4 nozzle", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + "inherits": "Cubicon PLA+ @base" +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA+ @base.json b/resources/profiles/Cubicon/filament/Cubicon PLA+ @base.json new file mode 100644 index 0000000000..3ad71b3370 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PLA+ @base.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": [""], + + "filament_id": "P510cfa1", + + "filament_settings_id": [ + "Cubicon PLA+ @base" + ], + + "filament_type": [ + "PLA" + ], + + "filament_vendor": [ + "Cubicon" + ], + + "inherits": "Cubicon PLA @base", + + "is_custom_defined": "0", + "name": "Cubicon PLA+ @base", + "temperature_vitrification": [ + "52" + ], + "nozzle_temperature_range_high": [ + "220" + ] +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json index da20c5c9d2..c87e99b0ec 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json @@ -1,23 +1,12 @@ { "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", "name": "Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle", - "filament_id": "P510cfa2", - "instantiation": "true", + "compatible_printers": [ "Cubicon xCeler-I 0.4 nozzle" ], - "default_filament_colour": "", - "filament_settings_id": [ - "Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle" - ], - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "Cubicon" - ], - "temperature_vitrification": [ - "45" - ] -} \ No newline at end of file + "inherits": "Cubicon PLAi21 @base" +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..c4dc718209 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + "from": "system", + "name": "Cubicon PLAi21 @Cubicon xCeler-Plus 0.4 nozzle", + + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ], + "inherits": "Cubicon PLAi21 @base" +} diff --git a/resources/profiles/Cubicon/filament/Cubicon PLAi21 @base.json b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @base.json new file mode 100644 index 0000000000..bbede501e8 --- /dev/null +++ b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @base.json @@ -0,0 +1,35 @@ +{ + "type": "filament", + "instantiation": "true", + "version": "1.0.0.0", + + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" + ], + + "default_filament_colour": "", + + "filament_id": "P510cfa2", + + "filament_settings_id": [ + "Cubicon PLAi21 @base" + ], + + "filament_type": [ + "PLA" + ], + + "filament_vendor": [ + "Cubicon" + ], + + "inherits": "Cubicon PLA @base", + + "is_custom_defined": "0", + "name": "Cubicon PLAi21 @base", + "temperature_vitrification": [ + "45" + ] + +} diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json index f8f90404b1..07f79da301 100644 --- a/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-I 0.4 nozzle.json @@ -2,7 +2,7 @@ "type": "machine", "name": "Cubicon xCeler-I 0.4 nozzle", "inherits": "fdm_machine_common", - "from": "User", + "from": "system", "instantiation": "true", "adaptive_bed_mesh_margin": "0", "auxiliary_fan": "1", @@ -22,9 +22,9 @@ "cooling_tube_length": "0", "cooling_tube_retraction": "0", "default_filament_profile": [ - "Cubicon PLA @base" + "Cubicon PLA @Cubicon xCeler-I" ], - "default_print_profile": "0.08mm Extra Fine @Creality K1 (0.4 nozzle)", + "default_print_profile": "cubicon default @base", "deretraction_speed": [ "30" ], diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-I.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-I.json index b8df593e7d..1b68282f3d 100644 --- a/resources/profiles/Cubicon/machine/Cubicon xCeler-I.json +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-I.json @@ -4,7 +4,7 @@ "nozzle_diameter": "0.4", "bed_model": "", "bed_texture": "Cubicon xCeler-I_bed_texture.svg", - "family": "Cuibicon", + "family": "Cubicon", "machine_tech": "FFF", - "default_materials": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle" + "default_materials": "Cubicon PLA @Cubicon xCeler-I" } \ No newline at end of file diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..8d9bc54aa5 --- /dev/null +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,248 @@ +{ + "type": "machine", + "instantiation": "true", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "1", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [ + "0x0" + ], + "bed_mesh_max": "99999,99999", + "bed_mesh_min": "-99999,-99999", + "bed_mesh_probe_distance": "50,50", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "default_filament_profile": [ + "Cubicon PLA @Cubicon xCeler-Plus" + ], + "default_print_profile": "cubicon default @base", + "deretraction_speed": [ + "30" + ], + "disable_m73": "0", + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "140", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_radius": "65", + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "from": "system", + "gcode_flavor": "klipper", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "inherits": "fdm_machine_common", + "is_custom_defined": "0", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "END_PRINT", + "machine_load_filament_time": "0", + "machine_max_acceleration_e": [ + "500", + "5000" + ], + "machine_max_acceleration_extruding": [ + "5000", + "20000" + ], + "machine_max_acceleration_x": [ + "13000", + "20000" + ], + "machine_max_acceleration_y": [ + "13000", + "20000" + ], + "machine_max_acceleration_z": [ + "250", + "500" + ], + "machine_max_speed_z": [ + "25", + "12" + ], + + "machine_max_acceleration_retracting": [ + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "13000", + "13000" + ], + + "machine_max_jerk_e": [ + "20", + "20" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "machine_max_junction_deviation": [ + "0", + "0" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_min_extruding_rate": [ + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0" + ], + "machine_pause_gcode": "PAUSE", + "machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.1" + ], + "name": "Cubicon xCeler-Plus 0.4 nozzle", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "0", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "print_host": "", + "print_host_webui": "", + "printable_area": [ + "0x0", + "310x0", + "310x310", + "0x310" + ], + "printable_height": "310", + "printer_model": "Cubicon xCeler-Plus", + "printer_notes": "", + "printer_settings_id": "Cubicon xCeler-Plus 0.4 nozzle", + "printer_structure": "undefine", + "printer_technology": "FFF", + "printer_variant": "0.4", + "printhost_apikey": "", + "printhost_authorization_type": "key", + "printhost_cafile": "", + "printhost_password": "", + "printhost_port": "", + "printhost_ssl_ignore_revoke": "0", + "printhost_user": "", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "1" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "0" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "0" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "0" + ], + "retraction_distances_when_cut": [ + "18" + ], + "retraction_length": [ + "0.8" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "silent_mode": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "0", + "support_chamber_temp_control": "0", + "support_multi_bed_types": "0", + "template_custom_gcode": "", + "thumbnails": "48x48/PNG, 300x300/PNG", + "thumbnails_format": "PNG", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "version": "2.1.1.0", + "wipe": [ + "0" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.2" + ], + "z_hop_types": [ + "Normal Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus.json b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus.json new file mode 100644 index 0000000000..466e159452 --- /dev/null +++ b/resources/profiles/Cubicon/machine/Cubicon xCeler-Plus.json @@ -0,0 +1,10 @@ +{ + "type": "machine_model", + "name": "Cubicon xCeler-Plus", + "nozzle_diameter": "0.4", + "bed_model": "", + "bed_texture": "Cubicon xCeler-I_bed_texture.svg", + "family": "Cubicon", + "machine_tech": "FFF", + "default_materials": "Cubicon PLA @Cubicon xCeler-Plus" +} diff --git a/resources/profiles/Cubicon/process/cubicon common @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/process/cubicon common @base.json similarity index 93% rename from resources/profiles/Cubicon/process/cubicon common @Cubicon xCeler-I 0.4 nozzle.json rename to resources/profiles/Cubicon/process/cubicon common @base.json index 3c6334275f..ad746aaef3 100644 --- a/resources/profiles/Cubicon/process/cubicon common @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/process/cubicon common @base.json @@ -1,12 +1,14 @@ { - "type": "process", - "name": "cubicon common @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_process_common_klipper", - "instantiation": "false", + "version": "1.0.0.0", + "instantiation": "false", "compatible_printers": [ - "Cubicon xCeler-I 0.4 nozzle" + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" ], - "print_settings_id": "cubicon common @Cubicon xCeler-I 0.4 nozzle", + "inherits": "fdm_process_common_klipper", + "name": "cubicon common @base", + "print_settings_id": "cubicon common @base", + "accel_to_decel_enable": "1", "accel_to_decel_factor": "100", "bridge_angle": "0", @@ -81,6 +83,7 @@ "top_solid_infill_flow_ratio": "0.9", "travel_speed": "500", "support_threshold_angle": "15", + "type": "process", "wall_loops": "2", "thick_bridges": "0", "extra_perimeters_on_overhangs": "1", @@ -107,9 +110,10 @@ "slowdown_for_curled_perimeters": "0", "bridge_speed": "50", "internal_bridge_speed": "150%", + "is_custom_defined": "0", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", "overhang_3_4_speed": "30", "overhang_4_4_speed": "10", "independent_support_layer_height": "1" -} \ No newline at end of file +} diff --git a/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-I 0.4 nozzle.json index dd1f422a16..a496d82598 100644 --- a/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-I 0.4 nozzle.json @@ -1,7 +1,11 @@ { + "version": "1.0.0.0", "type": "process", - "name": "cubicon default @Cubicon xCeler-I 0.4 nozzle", - "inherits": "cubicon common @Cubicon xCeler-I 0.4 nozzle", "instantiation": "true", - "print_settings_id": "cubicon default @Cubicon xCeler-I 0.4 nozzle" -} \ No newline at end of file + "inherits": "cubicon common @base", + "name": "cubicon default @Cubicon xCeler-I 0.4 nozzle", + "print_settings_id": "cubicon default @Cubicon xCeler-I 0.4 nozzle", + "compatible_printers": [ + "Cubicon xCeler-I 0.4 nozzle" + ] +} diff --git a/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-Plus 0.4 nozzle.json b/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-Plus 0.4 nozzle.json new file mode 100644 index 0000000000..6be1261923 --- /dev/null +++ b/resources/profiles/Cubicon/process/cubicon default @Cubicon xCeler-Plus 0.4 nozzle.json @@ -0,0 +1,11 @@ +{ + "version": "1.0.0.0", + "type": "process", + "instantiation": "true", + "inherits": "cubicon common @base", + "name": "cubicon default @Cubicon xCeler-Plus 0.4 nozzle", + "print_settings_id": "cubicon default @Cubicon xCeler-Plus 0.4 nozzle", + "compatible_printers": [ + "Cubicon xCeler-Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Cubicon/process/process template @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/process/process template @base.json similarity index 97% rename from resources/profiles/Cubicon/process/process template @Cubicon xCeler-I 0.4 nozzle.json rename to resources/profiles/Cubicon/process/process template @base.json index 5046b8b8f4..3d076f7895 100644 --- a/resources/profiles/Cubicon/process/process template @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/process/process template @base.json @@ -1,9 +1,5 @@ { - "type": "process", - "name": "process template @Cubicon xCeler-I 0.4 nozzle", - "inherits": "fdm_process_common_klipper", - "from": "User", - "instantiation": "false", + "instantiation": "false", "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "alternate_extra_wall": "0", @@ -24,7 +20,8 @@ "brim_width": "5", "calib_flowrate_topinfill_special_order": "0", "compatible_printers": [ - "Cubicon xCeler-I 0.4 nozzle" + "Cubicon xCeler-I 0.4 nozzle", + "Cubicon xCeler-Plus 0.4 nozzle" ], "compatible_printers_condition": "", "counterbore_hole_bridging": "none", @@ -53,6 +50,7 @@ "flush_into_infill": "0", "flush_into_objects": "0", "flush_into_support": "1", + "from": "User", "fuzzy_skin": "none", "fuzzy_skin_first_layer": "0", "fuzzy_skin_noise_type": "classic", @@ -77,6 +75,7 @@ "infill_direction": "45", "infill_jerk": "20", "infill_wall_overlap": "15%", + "inherits": "fdm_process_common_klipper", "initial_layer_acceleration": "1000", "initial_layer_infill_speed": "200", "initial_layer_jerk": "20", @@ -104,13 +103,14 @@ "internal_solid_infill_line_width": "0.42", "internal_solid_infill_pattern": "zig-zag", "internal_solid_infill_speed": "250", - "ironing_angle": "0", + "ironing_angle": "-1", "ironing_flow": "10%", "ironing_inset": "0", "ironing_pattern": "zig-zag", "ironing_spacing": "0.15", "ironing_speed": "30", "ironing_type": "no ironing", + "is_custom_defined": "0", "is_infill_first": "0", "lattice_angle_1": "-45", "lattice_angle_2": "45", @@ -131,6 +131,7 @@ "minimum_sparse_infill_area": "15", "mmu_segmented_region_interlocking_depth": "0", "mmu_segmented_region_max_width": "0", + "name": "process template @base", "notes": "", "only_one_wall_first_layer": "0", "only_one_wall_top": "1", @@ -158,7 +159,7 @@ "print_flow_ratio": "1", "print_order": "default", "print_sequence": "by layer", - "print_settings_id": "process template @Cubicon xCeler-I 0.4 nozzle", + "print_settings_id": "process template @base", "raft_contact_distance": "0.1", "raft_expansion": "1.5", "raft_first_layer_density": "100%", @@ -281,6 +282,7 @@ "tree_support_tip_diameter": "0.8", "tree_support_top_rate": "30%", "tree_support_wall_count": "0", + "version": "1.7.0.2", "wall_direction": "auto", "wall_distribution_count": "1", "wall_filament": "1", @@ -315,4 +317,4 @@ ], "xy_contour_compensation": "0", "xy_hole_compensation": "0" -} \ No newline at end of file +}