juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-08-06 01:27:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

Standardize the Unicode chars for unit strings (#14631)

Browse Source 
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
This commit is contained in:
Alexandre Folle de Menezes
2026-07-16 17:37:09 -03:00
committed by GitHub
parent f7145c9b37
commit 979e56f1d0
27 changed files with 77 additions and 77 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
src/libslic3r/PrintConfig.cpp
View File

@@ -2017,7 +2017,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("initial_layer_travel_acceleration", coFloatsOrPercents);
def->label = L("First layer travel");
def->tooltip = L("Travel acceleration of first layer.\nThe percentage value is relative to Travel Acceleration.");
def->sidetext = L("mm/s² or %");
def->sidetext = L(u8"mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "travel_acceleration";
@@ -2028,7 +2028,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Bridge");
def->category = L("Speed");
def->tooltip = L("Acceleration of bridges. If the value is expressed as a percentage (e.g. 50%), it will be calculated based on the outer wall acceleration.");
def->sidetext = L("mm/s² or %");
def->sidetext = L(u8"mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "outer_wall_acceleration";
@@ -3452,7 +3452,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Sparse infill");
def->category = L("Speed");
def->tooltip = L("Acceleration of sparse infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
def->sidetext = L("mm/s² or %");
def->sidetext = L(u8"mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "default_acceleration";
@@ -3463,7 +3463,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Internal solid infill");
def->category = L("Speed");
def->tooltip = L("Acceleration of internal solid infill. If the value is expressed as a percentage (e.g. 100%), it will be calculated based on the default acceleration.");
def->sidetext = L("mm/s² or %");
def->sidetext = L(u8"mm/s² or %");
def->min = 0;
def->mode = comAdvanced;
def->ratio_over = "default_acceleration";
@@ -3919,7 +3919,7 @@ void PrintConfigDef::init_fff_params()
"The shift is applied once every number of layers set by Layers between ripple offset, so layers within the same group are printed identically.");
def->min = 0;
def->max = 100;
def->sidetext = ("%");
def->sidetext = "%";
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionPercent(50));
@@ -4127,7 +4127,7 @@ void PrintConfigDef::init_fff_params()
"value that the firmware would silently drop, and the fan never receives a value below the one "
"you know it can actually spool at."
"\nSet to 0 to deactivate.");
def->sidetext = L("%");
def->sidetext = "%";
def->min = 0;
def->max = 100;
def->mode = comAdvanced;
@@ -5082,7 +5082,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("input_shaping_freq_x", coFloat);
def->label = L("X");
def->tooltip = L("Resonant frequency for the X axis input shaper.\nZero will use the firmware frequency.\nTo disable input shaping, use the Disable type.\nRRF: X and Y values are equal.");
def->sidetext = "Hz";
def->sidetext = L("Hz"); // Hertz, CIS languages need translation
def->min = 0;
def->max = 1000;
def->mode = comExpert;
@@ -5091,7 +5091,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("input_shaping_freq_y", coFloat);
def->label = L("Y");
def->tooltip = L("Resonant frequency for the Y axis input shaper.\nZero will use the firmware frequency.\nTo disable input shaping, use the Disable type.");
def->sidetext = "Hz";
def->sidetext = L("Hz"); // Hertz, CIS languages need translation
def->min = 0;
def->max = 1000;
def->mode = comExpert;
@@ -7125,7 +7125,7 @@ void PrintConfigDef::init_fff_params()
def->label = L("Minimal");
def->tooltip = L("This is the chamber temperature at which printing should start, while the chamber continues heating "
"toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to "
"begin printing once the chamber reaches 50°C, without waiting for the full 60°C.\n\n"
"begin printing once the chamber reaches 50℃, without waiting for the full 60℃.\n\n"
"It sets a G-code variable named chamber_minimal_temperature, which can be passed to your print start macro "
"or a heat soak macro, like this: PRINT_START (other variables) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n\n"
"Unlike the \"Target\" chamber temperature, this option does not emit any M141/M191 commands; it only exposes "