juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-09-29 11:51:24 +00:00
Code Issues Packages Projects Releases Wiki Activity

Standardize the Unicode chars for unit strings (#14631)

Browse Source 
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
This commit is contained in:
Alexandre Folle de Menezes
2026-07-16 17:37:09 -03:00
committed by GitHub
co-authored by Ian Bassi
parent f7145c9b37
commit 979e56f1d0
27 changed files with 77 additions and 77 deletions
Download Patch File Download Diff File Expand all files Collapse all files
localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
+2 -2
View File
@@ -5328,7 +5328,7 @@ msgstr "抖动 (mm/s)"
msgid "Fan speed (%)"
msgstr "风扇速度（%）"
msgid "Temperature (°C)"
msgid "Temperature (℃)"
msgstr "温度（℃）"
msgid "Volumetric flow rate (mm³/s)"
@@ -16215,7 +16215,7 @@ msgid ""
msgstr "对于 ABS、ASA、PC 和 PA 等高温材料，较高的腔室温度有助于抑制或减少翘曲，并有可能提高层间粘合强度。但同时，较高的腔室温度会降低 ABS 和 ASA 的空气过滤效率。 对于 PLA、PETG、TPU、PVA 等低温材料，应禁用此选项（设置为 0），因为腔室温度应较低，以避免热断时材料软化导致挤出机堵塞。 如果启用，此参数还会设置一个名为 chamber_temple 的 G-code 变量，该变量可用于将所需的腔室温度传递给打印启动宏，或热浸宏，如下所示：PRINT_START（其他变量）CHAMBER_TEMP=[cham​​ber_Temperature]。如果您的打印机不支持 M141/M191 命令，或者如果您希望在未安装活动室加热器的情况下在打印启动宏中处理热浸，则这可能很有用。"
msgid ""
"This is the chamber temperature at which printing should start, while the chamber continues heating toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to begin printing once the chamber reaches 50°C, without waiting for the full 60°C.\n"
"This is the chamber temperature at which printing should start, while the chamber continues heating toward the \"Target\" chamber temperature. For example, set the Target to 60 and the Minimal to 50 to begin printing once the chamber reaches 50℃, without waiting for the full 60℃.\n"
"\n"
"It sets a G-code variable named chamber_minimal_temperature, which can be passed to your print start macro or a heat soak macro, like this: PRINT_START (other variables) CHAMBER_MIN_TEMP=[chamber_minimal_temperature].\n"
"\n"