Prusa MINIIS Profiles, changed to Pressure Advance UI settings, better processes for different nozzle sizes (#5244)

* added Prusa Mini with Input Shaper to profiles

* refactoring to more reusable settings

* added more processes, changed settings

* Update 0.15mm Speed @MINIIS.json

* Update 0.10mm Speed @MINIIS.json

* changed to cubic because of speed

* further changes after reviewing prusa slicer settings

* simplified machine settings

* retraction speeds according to prusa slicer

* changed max flow according to prusa slicer

* after clearification at the prusaslicer repository M900 got removed

* precise wall per default

* enable reverse overhang on odd by default

* added settings from prusa slicer

* changed cooling setings

* changed default to inner-outer-inner wall

inner-outer-inner gives pretty good overhangs with better surface

* new profiles for bigger nozzles, changed some cooling settings according to prusaslicer

* profiles for different nozzles sizes, better speed settings

* initial layer height was wrong

* wrong initial layer height

* set the correct accelerations

* changed firmware version number

* using pressure advance UI setting instead of custom filament g-code

* Update Prusa Generic PC.json

* Update Prusa Generic PC.json

* changed max flow for PC

* added PVA filament profiles

* bug fix in filament loading

* changed line width according to prusa slicer

* changed heatbed temperature for Minis capabilities

resources/profiles/Prusa/filament/Prusa Generic TPU @MINIIS.json

@@ -12,9 +12,6 @@
     "filament_flow_ratio": [
       "1.15"
     ],
-    "filament_start_gcode": [
-      "M900 K0 ; Filament gcode"
-    ],
     "hot_plate_temp" : [
       "50"
     ],
@@ -83,6 +80,9 @@
   ],
   "support_material_interface_fan_speed": [
       "-1"
+  ],
+  "pressure_advance": [
+    "0"
   ],
     "compatible_printers": [
       "Prusa MINIIS 0.4 nozzle",