diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json
index 690eaded8f..9ed681e6a9 100644
--- a/resources/profiles/OrcaFilamentLibrary.json
+++ b/resources/profiles/OrcaFilamentLibrary.json
@@ -376,6 +376,22 @@
             "name": "Overture ABS Basic @base",
             "sub_path": "filament/Overture/Overture ABS Basic @base.json"
         },
+        {
+            "name": "Valment PLA @base",
+            "sub_path": "filament/Valment/Valment PLA @base.json"
+        },
+        {
+            "name": "Valment PLA Silk @base",
+            "sub_path": "filament/Valment/Valment PLA Silk @base.json"
+        },
+        {
+            "name": "Valment PLA-CF @base",
+            "sub_path": "filament/Valment/Valment PLA-CF @base.json"
+        },
+        {
+            "name": "Valment PLA Galaxy @base",
+            "sub_path": "filament/Valment/Valment PLA Galaxy @base.json"
+        },
         {
             "name": "PolyLite PLA @base",
             "sub_path": "filament/Polymaker/PolyLite PLA @base.json"
@@ -700,6 +716,22 @@
             "name": "Overture ABS Basic @System",
             "sub_path": "filament/Overture/Overture ABS Basic @System.json"
         },
+        {
+            "name": "Valment PLA @System",
+            "sub_path": "filament/Valment/Valment PLA @System.json"
+        },
+        {
+            "name": "Valment PLA Silk @System",
+            "sub_path": "filament/Valment/Valment PLA Silk @System.json"
+        },
+        {
+            "name": "Valment PLA-CF @System",
+            "sub_path": "filament/Valment/Valment PLA-CF @System.json"
+        },
+        {
+            "name": "Valment PLA Galaxy @System",
+            "sub_path": "filament/Valment/Valment PLA Galaxy @System.json"
+        },
         {
             "name": "PolyLite Dual PLA @System",
             "sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json"
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA @System.json
new file mode 100644
index 0000000000..ff2ce6a1c2
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Valment PLA @System",
+    "inherits": "Valment PLA @base",
+    "from": "system",
+    "setting_id": "VLMNT_01",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA @base.json
new file mode 100644
index 0000000000..fb7e29e3fb
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA @base.json	
@@ -0,0 +1,27 @@
+{
+  "type": "filament",
+  "name": "Valment PLA @base",
+  "inherits": "fdm_filament_pla",
+  "from": "system",
+  "filament_id": "VLMNT01",
+  "instantiation": "false",
+  "filament_cost": ["670"],
+  "filament_type": ["PLA"],
+  "default_filament_colour": ["#124943"],
+  "filament_density": ["1.24"],
+  "filament_flow_ratio": ["0.98"],
+  "filament_max_volumetric_speed": ["12"],
+  "filament_vendor": ["Valment"],
+  "slow_down_layer_time": ["6"],
+  "nozzle_temperature": ["220"],
+  "nozzle_temperature_initial_layer": ["225"],
+  "nozzle_temperature_range_low": ["200"],
+  "nozzle_temperature_range_high": ["250"],
+  "filament_notes": [
+    "Bu filament ayarları GlauTech tarafından oluşturulmuştur. Filamentin daha verimli çalışması için, slicerdaki kalibrasyon ayarlarının tek tek yapılması önemlidir. Kalibrasyon ayarları için, GlauTech yotube kanalından destek alabilirsiniz.\n\nBoş Makara Ağırlığı: 150gr"
+  ],
+  "slow_down_min_speed": ["20"],
+  "complete_print_exhaust_fan_speed": ["80"],
+  "during_print_exhaust_fan_speed": ["60"],
+  "additional_cooling_fan_speed": ["100"]
+}
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Galaxy @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Galaxy @System.json
new file mode 100644
index 0000000000..b2e053d2b3
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Galaxy @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Valment PLA Galaxy @System",
+    "inherits": "Valment PLA Galaxy @base",
+    "from": "system",
+    "setting_id": "VLMNT_04",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Galaxy @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Galaxy @base.json
new file mode 100644
index 0000000000..e6dc2548a3
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Galaxy @base.json	
@@ -0,0 +1,27 @@
+{
+  "type": "filament",
+  "name": "Valment PLA Galaxy @base",
+  "inherits": "fdm_filament_pla",
+  "from": "system",
+  "filament_id": "VLMNT04",
+  "instantiation": "false",
+  "filament_cost": ["850"],
+  "filament_type": ["PLA"],
+  "default_filament_colour": ["#124943"],
+  "filament_density": ["1.24"],
+  "filament_flow_ratio": ["0.98"],
+  "filament_max_volumetric_speed": ["12"],
+  "filament_vendor": ["Valment"],
+  "slow_down_layer_time": ["6"],
+  "nozzle_temperature": ["240"],
+  "nozzle_temperature_initial_layer": ["245"],
+  "nozzle_temperature_range_low": ["220"],
+  "nozzle_temperature_range_high": ["250"],
+  "filament_notes": [
+    "Bu filament ayarları GlauTech tarafından oluşturulmuştur. Filamentin daha verimli çalışması için, slicerdaki kalibrasyon ayarlarının tek tek yapılması önemlidir. Kalibrasyon ayarları için, GlauTech yotube kanalından destek alabilirsiniz.\n\nGalaxy filamentlerimizde; \n0.2mm nozul kullanılmaması,\n0.16mm katman yüksekliği altına inilmemesi önerilir.\n\nBoş Makara Ağırlığı: 150gr"
+  ],
+  "slow_down_min_speed": ["20"],
+  "complete_print_exhaust_fan_speed": ["80"],
+  "during_print_exhaust_fan_speed": ["60"],
+  "additional_cooling_fan_speed": ["100"]
+}
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @System.json
new file mode 100644
index 0000000000..8c842d388b
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Valment PLA Silk @System",
+    "inherits": "Valment PLA Silk @base",
+    "from": "system",
+    "setting_id": "VLMNT_02",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json
new file mode 100644
index 0000000000..11fce51d0c
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA Silk @base.json	
@@ -0,0 +1,27 @@
+{
+  "type": "filament",
+  "name": "Valment PLA Silk @base",
+  "inherits": "fdm_filament_pla",
+  "from": "system",
+  "filament_id": "VLMNT02",
+  "instantiation": "false",
+  "filament_cost": ["710"],
+  "filament_type": ["PLA"],
+  "filament_density": ["1.24"],
+  "default_filament_colour": ["#124943"],
+  "filament_flow_ratio": ["0.98"],
+  "filament_max_volumetric_speed": ["7.5"],
+  "filament_vendor": ["Valment"],
+  "slow_down_layer_time": ["6"],
+  "nozzle_temperature": ["240"],
+  "nozzle_temperature_initial_layer": ["245"],
+  "nozzle_temperature_range_low": ["220"],
+  "nozzle_temperature_range_high": ["250"],
+  "filament_notes": [
+    "Bu filament ayarları GlauTech tarafından oluşturulmuştur. Filamentin daha verimli çalışması için, slicerdaki kalibrasyon ayarlarının tek tek yapılması önemlidir. Kalibrasyon ayarları için, GlauTech yotube kanalından destek alabilirsiniz.\n\nBoş Makara Ağırlığı: 150gr"
+  ],
+  "slow_down_min_speed": ["20"],
+  "complete_print_exhaust_fan_speed": ["80"],
+  "during_print_exhaust_fan_speed": ["60"],
+  "additional_cooling_fan_speed": ["100"]
+}
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA-CF @System.json
new file mode 100644
index 0000000000..23980efd55
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA-CF @System.json	
@@ -0,0 +1,9 @@
+{
+    "type": "filament",
+    "name": "Valment PLA-CF @System",
+    "inherits": "Valment PLA-CF @base",
+    "from": "system",
+    "setting_id": "VLMNT_03",
+    "instantiation": "true",
+    "compatible_printers": []
+}
\ No newline at end of file
diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA-CF @base.json
new file mode 100644
index 0000000000..cc9f0448fb
--- /dev/null
+++ b/resources/profiles/OrcaFilamentLibrary/filament/Valment/Valment PLA-CF @base.json	
@@ -0,0 +1,27 @@
+{
+  "type": "filament",
+  "name": "Valment PLA-CF @base",
+  "inherits": "fdm_filament_pla",
+  "from": "system",
+  "filament_id": "VLMNT03",
+  "instantiation": "false",
+  "filament_cost": ["1400"],
+  "filament_type": ["PLA-CF"],
+  "default_filament_colour": ["#124943"],
+  "filament_density": ["1.24"],
+  "filament_flow_ratio": ["0.98"],
+  "filament_max_volumetric_speed": ["12"],
+  "filament_vendor": ["Valment"],
+  "slow_down_layer_time": ["6"],
+  "nozzle_temperature": ["225"],
+  "nozzle_temperature_initial_layer": ["230"],
+  "nozzle_temperature_range_low": ["200"],
+  "nozzle_temperature_range_high": ["250"],
+  "filament_notes": [
+    "Bu filament ayarları GlauTech tarafından oluşturulmuştur. Filamentin daha verimli çalışması için, slicerdaki kalibrasyon ayarlarının tek tek yapılması önemlidir. Kalibrasyon ayarları için, GlauTech yotube kanalından destek alabilirsiniz.\n\nBoş Makara Ağırlığı: 150gr"
+  ],
+  "slow_down_min_speed": ["20"],
+  "complete_print_exhaust_fan_speed": ["80"],
+  "during_print_exhaust_fan_speed": ["60"],
+  "additional_cooling_fan_speed": ["100"]
+}