juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-17 10:32:20 +00:00
Code Issues Packages Projects Releases Wiki Activity

Change direction for perimeter extrusion at odd layers. (#2413)

Browse Source 
* Change direction for perimeter extrusion at odd layers.

Initial test code based on supermerill/SuperSlicer@87245ae3c1

* Perimeters for both contours and holes can have alternating direction, to support overhangs on both side.
Also fixes wipe on loop.

* Only reverse order if the loops have steep overhang

* Support a special case that treat every layer as steep overhang

* Add options

* Disable overhang reverse if vase mode is enabled

* Allow extrusion reversal and skip overhang detection if fuzzy skin

---------

Co-authored-by: supermerill <merill@free.fr>
Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
Noisyfox
2023-10-21 04:23:05 -05:00
committed by GitHub
parent bbfb9d77fa
commit 951252c597
12 changed files with 199 additions and 35 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/libslic3r/Layer.cpp
View File

@@ -174,6 +174,8 @@ void Layer::make_perimeters()
&& config.gap_infill_speed.value == other_config.gap_infill_speed.value
&& config.filter_out_gap_fill.value == other_config.filter_out_gap_fill.value
&& config.detect_overhang_wall == other_config.detect_overhang_wall
&& config.overhang_reverse == other_config.overhang_reverse
&& config.overhang_reverse_threshold == other_config.overhang_reverse_threshold
&& config.opt_serialize("inner_wall_line_width") == other_config.opt_serialize("inner_wall_line_width")
&& config.opt_serialize("outer_wall_line_width") == other_config.opt_serialize("outer_wall_line_width")
&& config.detect_thin_wall == other_config.detect_thin_wall